2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 06:34:11 +08:00
Commit Graph

103 Commits

Author SHA1 Message Date
Jaegeuk Kim
cf779cab14 f2fs: handle EIO not to break fs consistency
There are two rules when EIO is occurred.
1. don't write any checkpoint data to preserve the previous checkpoint
2. don't lose the cached dentry/node/meta pages

So, at first, this patch adds set_page_dirty in f2fs_write_end_io's failure.
Then, writing checkpoint/dentry/node blocks is not allowed.

Note that, for the data pages, we can't just throw away by redirtying them.
Otherwise, kworker can fall into infinite loop to flush them.
(Ref. xfstests/019)

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-21 13:55:05 -07:00
Jaegeuk Kim
8501017e50 f2fs: check s_dirty under cp_mutex
It needs to check s_dirty under cp_mutex, since s_dirty is reset under that
mutex.
And previous condition was not correct, since we can omit doing checkpoint
when checkpoint was done followed by all the node pages were written back.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-21 09:21:02 -07:00
Jaegeuk Kim
1e968fdfe6 f2fs: introduce f2fs_cp_error for readability
This patch adds f2fs_cp_error for readability.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-21 09:21:00 -07:00
Jaegeuk Kim
ed2e621a95 f2fs: give a chance to mount again when encountering errors
This patch gives another chance to try mount process when we encounter an error.
This makes an effect on the roll-forward recovery failures as well.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-21 09:21:00 -07:00
Jaegeuk Kim
6f12ac25f0 f2fs: trigger release_dirty_inode in f2fs_put_super
The generic_shutdown_super calls sync_filesystem, evict_inode, and then
f2fs_put_super. In f2fs_evict_inode, we remain some dirty inode information
so we should release them at f2fs_put_super.

Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-21 09:20:29 -07:00
Jaegeuk Kim
97c3c5cac2 f2fs: don't skip checkpoint if there is no dirty node pages
This is the errorneous scenario.
1. write data
2. do checkpoint
3. produce some dirty node pages by the gc thread
4. write back dirty node pages
5. f2fs_put_super will skip the checkpoint, since dirty count for node pages is
  zero.

This patch removes such the wrong condition check.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-19 10:01:35 -07:00
arter97
e1c4204520 f2fs: fix typo
Fix typo and some grammatical errors.

The words "filesystem" and "readahead" are being used without the space treewide.

Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-19 10:01:33 -07:00
Chao Yu
b3582c6892 f2fs: reduce competition among node page writes
We do not need to block on ->node_write among different node page writers e.g.
fsync/flush, unless we have a node page writer from write_checkpoint.
So it's better use rw_semaphore instead of mutex type for ->node_write to
promote performance.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-07-30 23:28:37 -07:00
Jaegeuk Kim
6451e041c8 f2fs: add infra for ino management
This patch changes the naming of orphan-related data structures to use as
inode numbers managed globally.
Later, we can use this facility for managing any inode number lists.

Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-07-29 07:45:54 -07:00
Jaegeuk Kim
0f7b2abd18 f2fs: add nobarrier mount option
This patch adds a mount option, nobarrier, in f2fs.
The assumption in here is that file system keeps the IO ordering, but
doesn't care about cache flushes inside the storages.

Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-07-29 05:27:48 -07:00
Chao Yu
9d84795077 f2fs: fix to put root inode in error path of fill_super
We should put root inode correctly in error path of fill_super, otherwise we
may encounter a leak case of inode resource.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-07-25 08:19:57 -07:00
Chao Yu
6b2920a513 f2fs: use inner macro and function to clean up codes
In this patch we use below inner macro and function to clean up codes.
1. ADDRS_PER_PAGE
2. SM_I
3. f2fs_readonly

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-07-09 14:04:26 -07:00
Chao Yu
d6b7d4b31d f2fs: check lower bound nid value in check_nid_range
This patch add lower bound verification for nid in check_nid_range, so nids
reserved like 0, node, meta passed by caller could be checked there.

And then check_nid_range could be used in f2fs_nfs_get_inode for simplifying
code.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-07-09 05:58:08 -07:00
Gu Zheng
2163d19815 f2fs: introduce help function {create,destroy}_flush_cmd_control
Introduce help function {create,destroy}_flush_cmd_control to clean up
the create/destory flush merge operation.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:57 +09:00
Gu Zheng
a688b9d9e5 f2fs: introduce struct flush_cmd_control to wrap the flush_merge fields
Split the flush_merge fields from sm_i, and use the new struct flush_cmd_control
to wrap it, so that we can igonre these fileds if flush_merge is disable, and
it alse can the structs more neat.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:56 +09:00
Gu Zheng
876dc59eb1 f2fs: add the flush_merge handle in the remount flow
Add the *remount* handle of flush_merge option, so that the users
can enable flush_merge in the runtime, such as the underlying device
handles the cache_flush command relatively slowly.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:55 +09:00
Gu Zheng
b270ad6f0a f2fs: enable flush_merge only in f2fs is not read-only
Enable flush_merge only in f2fs is not read-only, so does the mount
option show.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:54 +09:00
Linus Torvalds
3021112598 f2fs updates for v3.15
This patch-set includes the following major enhancement patches.
  o introduce large directory support
  o introduce f2fs_issue_flush to merge redundant flush commands
  o merge write IOs as much as possible aligned to the segment
  o add sysfs entries to tune the f2fs configuration
  o use radix_tree for the free_nid_list to reduce in-memory operations
  o remove costly bit operations in f2fs_find_entry
  o enhance the readahead flow for CP/NAT/SIT/SSA blocks
 
 The other bug fixes are as follows.
  o recover xattr node blocks correctly after sudden-power-cut
  o fix to calculate the maximum number of node ids
  o enhance to handle many error cases
 
 And, there are a bunch of cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTQiQrAAoJEEAUqH6CSFDSlbIP/iq06BrUeMDLoQFhA2GQFKFD
 wd0A5h9hCiFcKBcI/u/aAQqj/a5wdwzDl9XzH2PzJ45IM6sVGQZ0lv+kdLhab6rk
 ipNbV7G0yLAX+8ygS6GZF7pSKfMzGSGTrRvfdtoiunIip1jCY1IkUxv1XMgBSPza
 wnWYrE5HXEqRUDCqPXJyxrPmx0/0jw8/V82Ng9stnY34ySs+l/3Pvg65Kh0QuSSy
 BRjJUGlOCF68KUBKd+6YB2T5KlbQde3/5lhP+GMOi+xm5sFB+j+59r/WpJpF2Nxs
 ImxQs5GkiU01ErH/rn5FgHY/zzddQenBKwOvrjEeUA1eVpBurdsIr1JN0P6qDbgB
 ho5U8LzCQq+HZiW444eQGkXSOagpUKqDhTVJO7Fji/wG88Atc9gLX3ix8TH2skxT
 C5CvvrJM7DKBtkZyTzotKY/cWorOZhge6E/EkbGaM1sSHdK5b1Rg4YlFi9TDyz0n
 QjGD1uuvEeukeKGdIG9pjc7o5ledbMDYwLpT2RuRXenLOTsn8BqDOo9aRTg+5Kag
 tJNJLFumjPR2mEBNKjicJMUf381J/SKDwZszAz9mgvCZXldMza/Ax0LzJDJCVmkP
 UuBiVzGxVzpd33IsESUDr0J9hc+t8kS10jfAeKnE3cpb6n7/RYxstHh6CHOFKNXM
 gPUSYPN3CYiP47DnSfzA
 =eSW+
 -----END PGP SIGNATURE-----

Merge tag 'for-f2fs-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "This patch-set includes the following major enhancement patches.
   - introduce large directory support
   - introduce f2fs_issue_flush to merge redundant flush commands
   - merge write IOs as much as possible aligned to the segment
   - add sysfs entries to tune the f2fs configuration
   - use radix_tree for the free_nid_list to reduce in-memory operations
   - remove costly bit operations in f2fs_find_entry
   - enhance the readahead flow for CP/NAT/SIT/SSA blocks

  The other bug fixes are as follows:
   - recover xattr node blocks correctly after sudden-power-cut
   - fix to calculate the maximum number of node ids
   - enhance to handle many error cases

  And, there are a bunch of cleanups"

* tag 'for-f2fs-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (62 commits)
  f2fs: fix wrong statistics of inline data
  f2fs: check the acl's validity before setting
  f2fs: introduce f2fs_issue_flush to avoid redundant flush issue
  f2fs: fix to cover io->bio with io_rwsem
  f2fs: fix error path when fail to read inline data
  f2fs: use list_for_each_entry{_safe} for simplyfying code
  f2fs: avoid free slab cache under spinlock
  f2fs: avoid unneeded lookup when xattr name length is too long
  f2fs: avoid unnecessary bio submit when wait page writeback
  f2fs: return -EIO when node id is not matched
  f2fs: avoid RECLAIM_FS-ON-W warning
  f2fs: skip unnecessary node writes during fsync
  f2fs: introduce fi->i_sem to protect fi's info
  f2fs: change reclaim rate in percentage
  f2fs: add missing documentation for dir_level
  f2fs: remove unnecessary threshold
  f2fs: throttle the memory footprint with a sysfs entry
  f2fs: avoid to drop nat entries due to the negative nr_shrink
  f2fs: call f2fs_wait_on_page_writeback instead of native function
  f2fs: introduce nr_pages_to_write for segment alignment
  ...
2014-04-07 10:55:36 -07:00
Jaegeuk Kim
6b4afdd794 f2fs: introduce f2fs_issue_flush to avoid redundant flush issue
Some storage devices show relatively high latencies to complete cache_flush
commands, even though their normal IO speed is prettry much high. In such
the case, it needs to merge cache_flush commands as much as possible to avoid
issuing them redundantly.
So, this patch introduces a mount option, "-o flush_merge", to mitigate such
the overhead.

If this option is enabled by user, F2FS merges the cache_flush commands and then
issues just one cache_flush on behalf of them. Once the single command is
finished, F2FS sends a completion signal to all the pending threads.

Note that, this option can be used under a workload consisting of very intensive
concurrent fsync calls, while the storage handles cache_flush commands slowly.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-04-07 09:50:58 +09:00
Chao Yu
df0f8dc0e1 f2fs: avoid unnecessary bio submit when wait page writeback
This patch introduce is_merged_page() to check whether current page is merged
in f2fs bio cache. When page is not in cache, we can avoid submitting bio cache,
resulting in having more chance to merge pages.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-04-01 18:53:41 +09:00
Jaegeuk Kim
d928bfbfe7 f2fs: introduce fi->i_sem to protect fi's info
This patch introduces fi->i_sem to protect fi's info that includes xattr_ver,
pino, i_nlink.
This enables to remove i_mutex during f2fs_sync_file, resulting in performance
improvement when a number of fsync calls are triggered from many concurrent
threads.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-20 22:10:11 +09:00
Jaegeuk Kim
cdfc41c134 f2fs: throttle the memory footprint with a sysfs entry
This patch introduces ram_thresh, a sysfs entry, which controls the memory
footprint used by the free nid list and the nat cache.

Previously, the free nid list was controlled by MAX_FREE_NIDS, while the nat
cache was managed by NM_WOUT_THRESHOLD.
However, this approach cannot be applied dynamically according to the system.

So, this patch adds ram_thresh that users can specify the threshold, which is
in order of 1 / 1024.
For example, if the total ram size is 4GB and the value is set to 10 by default,
f2fs tries to control the number of free nids and nat caches not to consume over
10 * (4GB / 1024) = 10MB.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-20 22:10:09 +09:00
Chao Yu
04c0938844 f2fs: fix incorrect parsing with option string
Previously 'background_gc={on***,off***}' is being parsed as correct option,
with this patch we cloud fix the trivial bug in mount process.

Change log from v1:
 o need to check length of parameter suggested by Jaegeuk Kim.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-18 10:13:02 +09:00
Chao Yu
90aa6dc9b9 f2fs: print type for each segment in segment_info's show
The original segment_info's show looks out-of-format:
cat /proc/fs/f2fs/loop0/segment_info
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 512
512 512 512 512 512 512 512 0 0 512
348 0 263 0 0 512 0 0 512 512
512 512 0 512 512 512 512 512 512 512
512 512 511 328 512 512 512 512 512 512
512 512 512 512 512 512 512 0 0 175

Let's fix this and show type for each segment.
cat /proc/fs/f2fs/loop0/segment_info
format: segment_type|valid_blocks
segment_type(0:HD, 1:WD, 2:CD, 3:HN, 4:WN, 5:CN)
0    2|0   1|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0
10   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0
20   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0
30   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0
40   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0
50   3|0   3|0   3|0   3|0   3|0   3|0   3|0   0|0   3|0   3|0
60   3|0   3|0   3|0   3|0   3|0   3|0   3|0   3|0   3|0   3|512
70   3|512 3|512 3|512 3|512 3|512 3|512 3|512 3|0   3|0   3|512
80   3|0   3|0   3|0   3|0   3|0   3|512 3|0   3|0   3|512 3|512
90   3|512 0|512 3|274 0|512 0|512 0|512 0|512 0|512 0|512 3|512
100  3|512 0|512 3|511 0|328 3|512 0|512 0|512 3|512 0|512 0|512
110  0|512 0|512 0|512 0|512 0|512 0|512 0|512 5|0   4|0   3|512

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-18 09:27:18 +09:00
Theodore Ts'o
02b9984d64 fs: push sync_filesystem() down to the file system's remount_fs()
Previously, the no-op "mount -o mount /dev/xxx" operation when the
file system is already mounted read-write causes an implied,
unconditional syncfs().  This seems pretty stupid, and it's certainly
documented or guaraunteed to do this, nor is it particularly useful,
except in the case where the file system was mounted rw and is getting
remounted read-only.

However, it's possible that there might be some file systems that are
actually depending on this behavior.  In most file systems, it's
probably fine to only call sync_filesystem() when transitioning from
read-write to read-only, and there are some file systems where this is
not needed at all (for example, for a pseudo-filesystem or something
like romfs).

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: linux-fsdevel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Jan Kara <jack@suse.cz>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Anders Larsen <al@alarsen.net>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: Petr Vandrovec <petr@vandrovec.name>
Cc: xfs@oss.sgi.com
Cc: linux-btrfs@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: codalist@coda.cs.cmu.edu
Cc: linux-ext4@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: fuse-devel@lists.sourceforge.net
Cc: cluster-devel@redhat.com
Cc: linux-mtd@lists.infradead.org
Cc: jfs-discussion@lists.sourceforge.net
Cc: linux-nfs@vger.kernel.org
Cc: linux-nilfs@vger.kernel.org
Cc: linux-ntfs-dev@lists.sourceforge.net
Cc: ocfs2-devel@oss.oracle.com
Cc: reiserfs-devel@vger.kernel.org
2014-03-13 10:14:33 -04:00
Chao Yu
910bb12d29 f2fs: check upper bound of ino value in f2fs_nfs_get_inode
Upper bound checking of ino should be added to f2fs_nfs_get_inode, so unneeded
process before do_read_inode in f2fs_iget could be avoided when ino is invalid.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-12 18:15:38 +09:00
Gu Zheng
46c04366bb f2fs: format segment_info's show for better legibility
The original segment_info's show is a bit out-of-format:

[root@guz Demoes]# cat /proc/fs/f2fs/loop0/segment_info
0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
......
0 0 0 0 0 0 0 0 0 0
0 0 1 0 0 1 [root@guz Demoes]#

so we fix it here for better legibility.
[root@guz Demoes]# cat /proc/fs/f2fs/loop0/segment_info
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
......
0 0 0 0 0 0 0 0 0 0
0 0 1 0 0 1
[root@guz Demoes]#

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-10 18:45:15 +09:00
Gu Zheng
e8512d2e0c f2fs: remove the unused ctor argument of f2fs_kmem_cache_create()
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-10 18:45:14 +09:00
Jaegeuk Kim
ab9fa662e4 f2fs: add an sysfs entry to control the directory level
This patch adds an sysfs entry to control dir_level used by the large directory.

The description of this entry is:

 dir_level                    This parameter controls the directory level to
			      support large directory. If a directory has a
			      number of files, it can reduce the file lookup
			      latency by increasing this dir_level value.
			      Otherwise, it needs to decrease this value to
			      reduce the space overhead. The default value is 0.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-27 20:31:15 +09:00
Jaegeuk Kim
6437d1b0ad f2fs: fix to do build_stat prior to the recovery procedure
At the end of the recovery procedure, write_checkpoint is called and updates
the cp count which is managed by f2fs stat.
But, previously build_stat() is called after the recovery procedure, which
results in:

BUG: unable to handle kernel NULL pointer dereference at 000000000000012c
IP: [<ffffffffa03b1030>] write_checkpoint+0x720/0xbc0 [f2fs]
Call Trace:
 [<ffffffff810a6b44>] ? mark_held_locks+0x74/0x140
 [<ffffffff8109a3e0>] ? __init_waitqueue_head+0x60/0x60
 [<ffffffffa03bf036>] recover_fsync_data+0x656/0xf20 [f2fs]
 [<ffffffff812ee3eb>] ? security_d_instantiate+0x1b/0x30
 [<ffffffffa03aeb4d>] f2fs_fill_super+0x94d/0xa00 [f2fs]
 [<ffffffff811a9825>] mount_bdev+0x1a5/0x1f0
 [<ffffffff8114915e>] ? __get_free_pages+0xe/0x40
 [<ffffffffa03ae200>] ? f2fs_remount+0x130/0x130 [f2fs]
 [<ffffffffa03aa575>] f2fs_mount+0x15/0x20 [f2fs]
 [<ffffffff811aa713>] mount_fs+0x43/0x1b0
 [<ffffffff811c7124>] vfs_kern_mount+0x74/0x160
 [<ffffffff811c5cb1>] ? __get_fs_type+0x51/0x60
 [<ffffffff811c9727>] do_mount+0x237/0xb50
 [<ffffffff811c936a>] ? copy_mount_options+0x3a/0x170

So, this patche changes the order of recovery_fsync_data() and
f2fs_build_stats().

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-24 16:00:39 +09:00
Chris Fries
6c311ec6c2 f2fs: clean checkpatch warnings
Fixed a variety of trivial checkpatch warnings.  The only delta should
be some minor formatting on log strings that were split / too long.

Signed-off-by: Chris Fries <cfries@motorola.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-20 10:27:12 +09:00
Jaegeuk Kim
b1c57c1caa f2fs: add a sysfs entry to control max_victim_search
Previously during SSR and GC, the maximum number of retrials to find a victim
segment was hard-coded by MAX_VICTIM_SEARCH, 4096 by default.

This number makes an effect on IO locality, when SSR mode is activated, which
results in performance fluctuation on some low-end devices.

If max_victim_search = 4, the victim will be searched like below.
("D" represents a dirty segment, and "*" indicates a selected victim segment.)

 D1 D2 D3 D4 D5 D6 D7 D8 D9
[   *       ]
      [   *    ]
            [         * ]
	                [ ....]

This patch adds a sysfs entry to control the number dynamically through:
  /sys/fs/f2fs/$dev/max_victim_search

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-08 13:45:08 +09:00
Jaegeuk Kim
216fbd6443 f2fs: introduce sysfs entry to control in-place-update policy
This patch introduces new sysfs entries for users to control the policy of
in-place-updates, namely IPU, in f2fs.

Sometimes f2fs suffers from performance degradation due to its out-of-place
update policy that produces many additional node block writes.
If the storage performance is very dependant on the amount of data writes
instead of IO patterns, we'd better drop this out-of-place update policy.

This patch suggests 5 polcies and their triggering conditions as follows.

[sysfs entry name = ipu_policy]

0: F2FS_IPU_FORCE       all the time,
1: F2FS_IPU_SSR         if SSR mode is activated,
2: F2FS_IPU_UTIL        if FS utilization is over threashold,
3: F2FS_IPU_SSR_UTIL    if SSR mode is activated and FS utilization is over
                        threashold,
4: F2FS_IPU_DISABLE    disable IPU. (=default option)

[sysfs entry name = min_ipu_util]

This parameter controls the threshold to trigger in-place-updates.
The number indicates percentage of the filesystem utilization, and used by
F2FS_IPU_UTIL and F2FS_IPU_SSR_UTIL policies.

For more details, see need_inplace_update() in segment.h.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:07 +09:00
Changman Lee
5dcd8a7150 f2fs: missing kmem_cache_destroy for discard_entry
insmod f2fs.ko is failed after insmod and rmmod firstly.

$ sudo insmod fs/f2fs/f2fs.ko
insmod: error inserting 'fs/f2fs/f2fs.ko': -1 Cannot allocate memory

-- dmesg --
kmem_cache_sanity_check (free_nid): Cache name already exists.

Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:07 +09:00
Jaegeuk Kim
458e6197c3 f2fs: refactor bio->rw handling
This patch introduces f2fs_io_info to mitigate the complex parameter list.

struct f2fs_io_info {
	enum page_type type;		/* contains DATA/NODE/META/META_FLUSH */
	int rw;				/* contains R/RS/W/WS */
	int rw_flag;			/* contains REQ_META/REQ_PRIO */
}

1. f2fs_write_data_pages
 - DATA
 - WRITE_SYNC is set when wbc->WB_SYNC_ALL.

2. sync_node_pages
 - NODE
 - WRITE_SYNC all the time

3. sync_meta_pages
 - META
 - WRITE_SYNC all the time
 - REQ_META | REQ_PRIO all the time

 ** f2fs_submit_merged_bio() handles META_FLUSH.

4. ra_nat_pages, ra_sit_pages, ra_sum_pages
 - META
 - READ_SYNC

Cc: Fan Li <fanofcode.li@samsung.com>
Cc: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:06 +09:00
Jaegeuk Kim
6bacf52fb5 f2fs: add unlikely() macro for compiler more aggressively
This patch adds unlikely() macro into the most of codes.
The basic rule is to add that when:
- checking unusual errors,
- checking page mappings,
- and the other unlikely conditions.

Change log from v1:
 - Don't add unlikely for the NULL test and error test: advised by Andi Kleen.

Cc: Chao Yu <chao2.yu@samsung.com>
Cc: Andi Kleen <andi@firstfloor.org>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:06 +09:00
Chao Yu
a0acdfe05a f2fs: use inner macro GFP_F2FS_ZERO for simplification
Use inner macro GFP_F2FS_ZERO to instead of GFP_NOFS | __GFP_ZERO for
simplification of code.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:05 +09:00
Chao Yu
8f99a946f3 f2fs: convert recover_orphan_inodes to void
The recover_orphan_inodes() returns no error all the time, so we don't need to
check its errors.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: add description]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:05 +09:00
Huajun Li
8274de77b7 f2fs: add a new mount option: inline_data
Add a mount option: inline_data. If the mount option is set,
data of New created small files can be stored in their inode.

Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:03 +09:00
Chao Yu
924b720b58 f2fs: add a new function to support for merging contiguous read
For better read performance, we add a new function to support for merging
contiguous read as the one for write.

v1-->v2:
 o add declarations here as Gu Zheng suggested.
 o use new structure f2fs_bio_info introduced by Jaegeuk Kim.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Acked-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
2013-12-23 10:18:02 +09:00
Jaegeuk Kim
1ff7bd3bb5 f2fs: introduce a bio array for per-page write bios
The f2fs has three bio types, NODE, DATA, and META, and manages some data
structures per each bio types.

The codes are a little bit messy, thus, this patch introduces a bio array
which groups individual data structures as follows.

struct f2fs_bio_info {
	struct bio *bio;		/* bios to merge */
	sector_t last_block_in_bio;	/* last block number */
	struct mutex io_mutex;		/* mutex for bio */
};

struct f2fs_sb_info {
	...
	struct f2fs_bio_info write_io[NR_PAGE_TYPE];	/* for write bios */
	...
};

The code changes from this new data structure are trivial.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:01 +09:00
Jaegeuk Kim
971767caf6 f2fs: use sbi->write_mutex for write bios
This patch removes an unnecessary semaphore (i.e., sbi->bio_sem).
There is no reason to use the semaphore when f2fs submits read and write IOs.
Instead, let's use a write mutex and cover the sbi->bio[] by the lock.

Change log from v1:
 o split write_mutex suggested by Chao Yu

Chao described,
"All DATA/NODE/META bio buffers in superblock is protected by
'sbi->write_mutex', but each bio buffer area is independent, So we
should split write_mutex to three for DATA/NODE/META."

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:01 +09:00
Jaegeuk Kim
7ac8c3b051 f2fs: add a sysfs entry to control max_discards
If frequent small discards are issued to the device, the performance would
be degraded significantly.
So, this patch adds a sysfs entry to control the number of discards to be
issued during a checkpoint procedure.

By default, f2fs does not issue any small discards, which means max_discards
is zero.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:00 +09:00
Jaegeuk Kim
7fd9e544fb f2fs: add a slab cache entry for small discards
This patch adds a slab cache entry for small discards.

Each entry consists of:

struct discard_entry {
	struct list_head list;	/* list head */
	block_t blkaddr;	/* block address to be discarded */
	int len;		/* # of consecutive blocks of the discard */
};

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:00 +09:00
Chao Yu
1d15bd2034 f2fs: fix memory leak after kobject init failed in fill_super
If we failed to init&add kobject when fill_super, stats info and proc object of
f2fs will not be released.
We should free them before we finish fill_super.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-08 14:10:29 +09:00
Changman Lee
fb51b5ef9c f2fs: cleanup waiting routine for writeback pages in cp
use genernal method supported by kernel

 o changes from v1
   If any waiter exists at end io, wake up it.

Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-08 14:10:29 +09:00
Jaegeuk Kim
ea91e9b043 f2fs: add reclaiming control by sysfs
This patch adds a control method in sysfs to reclaim prefree segments.

Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-25 16:54:39 +09:00
Haicheng Li
aabe51364f f2fs: use bool for booleans
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-25 16:54:37 +09:00
Gu Zheng
9076a75f8e f2fs: introduce function read_raw_super_block()
Introduce function read_raw_super_block() to hide reading raw super block and
the retry routine if the first sb is invalid.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-18 09:44:13 +09:00
Jaegeuk Kim
b1838f8952 f2fs: fix the starvation problem on cp_rwsem
This patch removes the logic previously introduced to address the starvation
on cp_rwsem.

One potential there-in bug is that we should cover the wait.list with spin_lock,
but the previous code broke this rule.

And, actually current rwsem handles this starvation issue reasonably, so that we
didn't need to do this before neither.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-18 09:44:13 +09:00