Pull x86 fixes from Thomas Gleixner:
"A set of fixes and updates for x86:
- Address a swiotlb regression which was caused by the recent DMA
rework and made driver fail because dma_direct_supported() returned
false
- Fix a signedness bug in the APIC ID validation which caused invalid
APIC IDs to be detected as valid thereby bloating the CPU possible
space.
- Fix inconsisten config dependcy/select magic for the MFD_CS5535
driver.
- Fix a corruption of the physical address space bits when encryption
has reduced the address space and late cpuinfo updates overwrite
the reduced bit information with the original value.
- Dominiks syscall rework which consolidates the architecture
specific syscall functions so all syscalls can be wrapped with the
same macros. This allows to switch x86/64 to struct pt_regs based
syscalls. Extend the clearing of user space controlled registers in
the entry patch to the lower registers"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix signedness bug in APIC ID validity checks
x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption
x86/olpc: Fix inconsistent MFD_CS5535 configuration
swiotlb: Use dma_direct_supported() for swiotlb_ops
syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention
syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()
syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention
syscalls/core, syscalls/x86: Clean up syscall stub naming convention
syscalls/x86: Extend register clearing on syscall entry to lower registers
syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64
syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32
syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls
syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls
syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
x86/syscalls: Don't pointlessly reload the system call number
x86/mm: Fix documentation of module mapping range with 4-level paging
x86/cpuid: Switch to 'static const' specifier
* minor regression test cleanup
* formatting fixes for end user use of kdb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zz/y
-----END PGP SIGNATURE-----
Merge tag 'for_linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb
Pull kdb updates from Jason Wessel:
- fix 2032 time access issues and new compiler warnings
- minor regression test cleanup
- formatting fixes for end user use of kdb
* tag 'for_linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
kdb: use memmove instead of overlapping memcpy
kdb: use ktime_get_mono_fast_ns() instead of ktime_get_ts()
kdb: bl: don't use tab character in output
kdb: drop newline in unknown command output
kdb: make "mdr" command repeat
kdb: use __ktime_get_real_seconds instead of __current_kernel_time
misc: kgdbts: Display progress of asynchronous tests
* pm-cpuidle:
tick-sched: avoid a maybe-uninitialized warning
cpuidle: Add definition of residency to sysfs documentation
time: hrtimer: Use timerqueue_iterate_next() to get to the next timer
nohz: Avoid duplication of code related to got_idle_tick
nohz: Gather tick_sched booleans under a common flag field
cpuidle: menu: Avoid selecting shallow states with stopped tick
cpuidle: menu: Refine idle state selection for running tick
sched: idle: Select idle state before stopping the tick
time: hrtimer: Introduce hrtimer_next_event_without()
time: tick-sched: Split tick_nohz_stop_sched_tick()
cpuidle: Return nohz hint from cpuidle_select()
jiffies: Introduce USER_TICK_USEC and redefine TICK_USEC
sched: idle: Do not stop the tick before cpuidle_idle_call()
sched: idle: Do not stop the tick upfront in the idle loop
time: tick-sched: Reorganize idle tick management code
* pm-qos:
PM / QoS: mark expected switch fall-throughs
The use of bitfields seems to confuse gcc, leading to a false-positive
warning in all compiler versions:
kernel/time/tick-sched.c: In function 'tick_nohz_idle_exit':
kernel/time/tick-sched.c:538:2: error: 'now' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This introduces a temporary variable to track the flags so gcc
doesn't have to evaluate twice, eliminating the code path that
leads to the warning.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85301
Fixes: 1cae544d42d2 ("nohz: Gather tick_sched booleans under a common flag field")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use timerqueue_iterate_next() to get to the next timer in
__hrtimer_next_event_base() without browsing the timerqueue
details diredctly.
No intentional changes in functionality.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move the code setting ts->got_idle_tick into tick_sched_do_timer() to
avoid code duplication.
No intentional changes in functionality.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Optimize the space and leave plenty of room for further flags.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
[ rjw: Do not use __this_cpu_read() to access tick_stopped and add
got_idle_tick to avoid overloading inidle ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the tick isn't stopped, the target residency of the state selected
by the menu governor may be greater than the actual time to the next
tick and that means lost energy.
To avoid that, make tick_nohz_get_sleep_length() return the current
time to the next event (before stopping the tick) in addition to the
estimated one via an extra pointer argument and make menu_select()
use that value to refine the state selection when necessary.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
In order to address the issue with short idle duration predictions
by the idle governor after the scheduler tick has been stopped,
reorder the code in cpuidle_idle_call() so that the governor idle
state selection runs before tick_nohz_idle_go_idle() and use the
"nohz" hint returned by cpuidle_select() to decide whether or not
to stop the tick.
This isn't straightforward, because menu_select() invokes
tick_nohz_get_sleep_length() to get the time to the next timer
event and the number returned by the latter comes from
__tick_nohz_idle_stop_tick(). Fortunately, however, it is possible
to compute that number without actually stopping the tick and with
the help of the existing code.
Namely, tick_nohz_get_sleep_length() can be made call
tick_nohz_next_event(), introduced earlier, to get the time to the
next non-highres timer event. If that happens, tick_nohz_next_event()
need not be called by __tick_nohz_idle_stop_tick() again.
If it turns out that the scheduler tick cannot be stopped going
forward or the next timer event is too close for the tick to be
stopped, tick_nohz_get_sleep_length() can simply return the time to
the next event currently programmed into the corresponding clock
event device.
In addition to knowing the return value of tick_nohz_next_event(),
however, tick_nohz_get_sleep_length() needs to know the time to the
next highres timer event, but with the scheduler tick timer excluded,
which can be computed with the help of hrtimer_get_next_event().
That minimum of that number and the tick_nohz_next_event() return
value is the total time to the next timer event with the assumption
that the tick will be stopped. It can be returned to the idle
governor which can use it for predicting idle duration (under the
assumption that the tick will be stopped) and deciding whether or
not it makes sense to stop the tick before putting the CPU into the
selected idle state.
With the above, the sleep_length field in struct tick_sched is not
necessary any more, so drop it.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199227
Reported-by: Doug Smythies <dsmythies@telus.net>
Reported-by: Thomas Ilsche <thomas.ilsche@tu-dresden.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
The next set of changes will need to compute the time to the next
hrtimer event over all hrtimers except for the scheduler tick one.
To that end introduce a new helper function,
hrtimer_next_event_without(), for computing the time until the next
hrtimer event over all timers except for one and modify the underlying
code in __hrtimer_next_event_base() to prepare it for being called by
that new function.
No intentional changes in functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
In order to address the issue with short idle duration predictions
by the idle governor after the scheduler tick has been stopped, split
tick_nohz_stop_sched_tick() into two separate routines, one computing
the time to the next timer event and the other simply stopping the
tick when the time to the next timer event is known.
Prepare these two routines to be called separately, as one of them
will be called by the idle governor in the cpuidle_select() code
path after subsequent changes.
Update the former callers of tick_nohz_stop_sched_tick() to use
the new routines, tick_nohz_next_event() and tick_nohz_stop_tick(),
instead of it and move the updates of the sleep_length field in
struct tick_sched into __tick_nohz_idle_stop_tick() as it doesn't
need to be updated anywhere else.
There should be no intentional visible changes in functionality
resulting from this change.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Add a new pointer argument to cpuidle_select() and to the ->select
cpuidle governor callback to allow a boolean value indicating
whether or not the tick should be stopped before entering the
selected state to be returned from there.
Make the ladder governor ignore that pointer (to preserve its
current behavior) and make the menu governor return 'false" through
it if:
(1) the idle exit latency is constrained at 0, or
(2) the selected state is a polling one, or
(3) the expected idle period duration is within the tick period
range.
In addition to that, the correction factor computations in the menu
governor need to take the possibility that the tick may not be
stopped into account to avoid artificially small correction factor
values. To that end, add a mechanism to record tick wakeups, as
suggested by Peter Zijlstra, and use it to modify the menu_update()
behavior when tick wakeup occurs. Namely, if the CPU is woken up by
the tick and the return value of tick_nohz_get_sleep_length() is not
within the tick boundary, the predicted idle duration is likely too
short, so make menu_update() try to compensate for that by updating
the governor statistics as though the CPU was idle for a long time.
Since the value returned through the new argument pointer of
cpuidle_select() is not used by its caller yet, this change by
itself is not expected to alter the functionality of the code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Since the subsequent changes will need a TICK_USEC definition
analogous to TICK_NSEC, rename the existing TICK_USEC as
USER_TICK_USEC, update its users and redefine TICK_USEC
accordingly.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Push the decision whether or not to stop the tick somewhat deeper
into the idle loop.
Stopping the tick upfront leads to unpleasant outcomes in case the
idle governor doesn't agree with the nohz code on the duration of the
upcoming idle period. Specifically, if the tick has been stopped and
the idle governor predicts short idle, the situation is bad regardless
of whether or not the prediction is accurate. If it is accurate, the
tick has been stopped unnecessarily which means excessive overhead.
If it is not accurate, the CPU is likely to spend too much time in
the (shallow, because short idle has been predicted) idle state
selected by the governor [1].
As the first step towards addressing this problem, change the code
to make the tick stopping decision inside of the loop in do_idle().
In particular, do not stop the tick in the cpu_idle_poll() code path.
Also don't do that in tick_nohz_irq_exit() which doesn't really have
enough information on whether or not to stop the tick.
Link: https://marc.info/?l=linux-pm&m=150116085925208&w=2 # [1]
Link: https://tu-dresden.de/zih/forschung/ressourcen/dateien/projekte/haec/powernightmares.pdf
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Prepare the scheduler tick code for reworking the idle loop to
avoid stopping the tick in some cases.
The idea is to split the nohz idle entry call to decouple the idle
time stats accounting and preparatory work from the actual tick stop
code, in order to later be able to delay the tick stop once we reach
more power-knowledgeable callers.
Move away the tick_nohz_start_idle() invocation from
__tick_nohz_idle_enter(), rename the latter to
__tick_nohz_idle_stop_tick() and define tick_nohz_idle_stop_tick()
as a wrapper around it for calling it from the outside.
Make tick_nohz_idle_enter() only call tick_nohz_start_idle() instead
of calling the entire __tick_nohz_idle_enter(), add another wrapper
disabling and enabling interrupts around tick_nohz_idle_stop_tick()
and make the current callers of tick_nohz_idle_enter() call it too
to retain their current functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
It may be useful for an architecture to override the definitions of the
COMPAT_SYSCALL_DEFINE0() and __COMPAT_SYSCALL_DEFINEx() macros in
<linux/compat.h>, in particular to use a different calling convention
for syscalls. This patch provides a mechanism to do so, based on the
previously introduced CONFIG_ARCH_HAS_SYSCALL_WRAPPER. If it is enabled,
<asm/sycall_wrapper.h> is included in <linux/compat.h> and may be used
to define the macros mentioned above. Moreover, as the syscall calling
convention may be different if CONFIG_ARCH_HAS_SYSCALL_WRAPPER is set,
the compat syscall function prototypes in <linux/compat.h> are #ifndef'd
out in that case.
As some of the syscalls and/or compat syscalls may not be present,
the COND_SYSCALL() and COND_SYSCALL_COMPAT() macros in kernel/sys_ni.c
as well as the SYS_NI() and COMPAT_SYS_NI() macros in
kernel/time/posix-stubs.c can be re-defined in <asm/syscall_wrapper.h> iff
CONFIG_ARCH_HAS_SYSCALL_WRAPPER is enabled.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-5-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull time(r) updates from Thomas Gleixner:
"A small set of updates for timers and timekeeping:
- The most interesting change is the consolidation of clock MONOTONIC
and clock BOOTTIME.
Clock MONOTONIC behaves now exactly like clock BOOTTIME and does
not longer ignore the time spent in suspend. A new clock
MONOTONIC_ACTIVE is provived which behaves like clock MONOTONIC in
kernels before this change. This allows applications to
programmatically check for the clock MONOTONIC behaviour.
As discussed in the review thread, this has the potential of
breaking user space and we might have to revert this. Knock on wood
that we can avoid that exercise.
- Updates to the NTP mechanism to improve accuracy
- A new kernel internal data structure to aid the ongoing Y2038 work.
- Cleanups and simplifications of the clocksource code.
- Make the alarmtimer code play nicely with debugobjects"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
alarmtimer: Init nanosleep alarm timer on stack
y2038: Introduce struct __kernel_old_timeval
tracing: Unify the "boot" and "mono" tracing clocks
hrtimer: Unify MONOTONIC and BOOTTIME clock behavior
posix-timers: Unify MONOTONIC and BOOTTIME clock behavior
timekeeping: Remove boot time specific code
Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior
timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock
timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock
timekeeping/ntp: Determine the multiplier directly from NTP tick length
timekeeping/ntp: Don't align NTP frequency adjustments to ticks
clocksource: Use ATTRIBUTE_GROUPS
clocksource: Use DEVICE_ATTR_RW/RO/WO to define device attributes
clocksource: Don't walk the clocksource list for empty override
Pull scheduler updates from Ingo Molnar:
"The main scheduler changes in this cycle were:
- NUMA balancing improvements (Mel Gorman)
- Further load tracking improvements (Patrick Bellasi)
- Various NOHZ balancing cleanups and optimizations (Peter Zijlstra)
- Improve blocked load handling, in particular we can now reduce and
eventually stop periodic load updates on 'very idle' CPUs. (Vincent
Guittot)
- On isolated CPUs offload the final 1Hz scheduler tick as well, plus
related cleanups and reorganization. (Frederic Weisbecker)
- Core scheduler code cleanups (Ingo Molnar)"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
sched/core: Update preempt_notifier_key to modern API
sched/cpufreq: Rate limits for SCHED_DEADLINE
sched/fair: Update util_est only on util_avg updates
sched/cpufreq/schedutil: Use util_est for OPP selection
sched/fair: Use util_est in LB and WU paths
sched/fair: Add util_est on top of PELT
sched/core: Remove TASK_ALL
sched/completions: Use bool in try_wait_for_completion()
sched/fair: Update blocked load when newly idle
sched/fair: Move idle_balance()
sched/nohz: Merge CONFIG_NO_HZ_COMMON blocks
sched/fair: Move rebalance_domains()
sched/nohz: Optimize nohz_idle_balance()
sched/fair: Reduce the periodic update duration
sched/nohz: Stop NOHZ stats when decayed
sched/cpufreq: Provide migration hint
sched/nohz: Clean up nohz enter/exit
sched/fair: Update blocked load from NEWIDLE
sched/fair: Add NOHZ stats balancing
sched/fair: Restructure nohz_balance_kick()
...
Pull RCU updates from Ingo Molnar:
"The main RCU subsystem changes in this cycle were:
- Miscellaneous fixes, perhaps most notably removing obsolete code
whose only purpose in life was to gather information for the
now-removed RCU debugfs facility. Other notable changes include
removing NO_HZ_FULL_ALL in favor of the nohz_full kernel boot
parameter, minor optimizations for expedited grace periods, some
added tracing, creating an RCU-specific workqueue using Tejun's new
WQ_MEM_RECLAIM flag, and several cleanups to code and comments.
- SRCU cleanups and optimizations.
- Torture-test updates, perhaps most notably the adding of ARMv8
support, but also including numerous cleanups and usability fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
rcu: Create RCU-specific workqueues with rescuers
torture: Provide more sensible nreader/nwriter defaults for rcuperf
torture: Grace periods do not piggyback off of themselves
torture: Adjust rcuperf trace processing to allow for workqueues
torture: Default jitter off when running rcuperf
torture: Specify qemu memory size with --memory argument
rcutorture: Add basic ARM64 support to run scripts
rcutorture: Update kvm.sh header comment
rcutorture: Record which grace-period primitives are tested
rcutorture: Re-enable testing of dynamic expediting
rcutorture: Avoid fake-writer use of undefined primitives
rcutorture: Abstract function and module names
rcutorture: Replace multi-instance kzalloc() with kcalloc()
rcu: Remove SRCU throttling
srcu: Remove dead code in srcu_gp_end()
srcu: Reduce scans of srcu_data in counter wrap check
srcu: Prevent sdp->srcu_gp_seq_needed_exp counter wrap
srcu: Abstract function name
rcu: Make expedited RCU CPU selection avoid unnecessary stores
rcu: Trace expedited GP delays due to transitioning CPUs
...
syszbot reported the following debugobjects splat:
ODEBUG: object is on stack, but not annotated
WARNING: CPU: 0 PID: 4185 at lib/debugobjects.c:328
RIP: 0010:debug_object_is_on_stack lib/debugobjects.c:327 [inline]
debug_object_init+0x17/0x20 lib/debugobjects.c:391
debug_hrtimer_init kernel/time/hrtimer.c:410 [inline]
debug_init kernel/time/hrtimer.c:458 [inline]
hrtimer_init+0x8c/0x410 kernel/time/hrtimer.c:1259
alarm_init kernel/time/alarmtimer.c:339 [inline]
alarm_timer_nsleep+0x164/0x4d0 kernel/time/alarmtimer.c:787
SYSC_clock_nanosleep kernel/time/posix-timers.c:1226 [inline]
SyS_clock_nanosleep+0x235/0x330 kernel/time/posix-timers.c:1204
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
This happens because the hrtimer for the alarm nanosleep is on stack, but
the code does not use the proper debug objects initialization.
Split out the code for the allocated use cases and invoke
hrtimer_init_on_stack() for the nanosleep related functions.
Reported-by: syzbot+a3e0726462b2e346a31d@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: syzkaller-bugs@googlegroups.com
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1803261528270.1585@nanos.tec.linutronix.de
The clockid argument of clockid_to_kclock() comes straight from user space
via various syscalls and is used as index into the posix_clocks array.
Protect it against spectre v1 array out of bounds speculation. Remove the
redundant check for !posix_clock[id] as this is another source for
speculation and does not provide any advantage over the return
posix_clock[id] path which returns NULL in that case anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1802151718320.1296@nanos.tec.linutronix.de
Dealing with 'struct timeval' users in the y2038 series is a bit tricky:
We have two definitions of timeval that are visible to user space,
one comes from glibc (or some other C library), the other comes from
linux/time.h. The kernel copy is what we want to be used for a number of
structures defined by the kernel itself, e.g. elf_prstatus (used it core
dumps), sysinfo and rusage (used in system calls). These generally tend
to be used for passing time intervals rather than absolute (epoch-based)
times, so they do not suffer from the y2038 overflow. Some of them
could be changed to use 64-bit timestamps by creating new system calls,
others like the core files cannot easily be changed.
An application using these interfaces likely also uses gettimeofday()
or other interfaces that use absolute times, and pass 'struct timeval'
pointers directly into kernel interfaces, so glibc must redefine their
timeval based on a 64-bit time_t when they introduce their y2038-safe
interfaces.
The only reasonable way forward I see is to remove the 'timeval'
definion from the kernel's uapi headers, and change the interfaces that
we do not want to (or cannot) duplicate for 64-bit times to use a new
__kernel_old_timeval definition instead. This type should be avoided
for all new interfaces (those can use 64-bit nanoseconds, or the 64-bit
version of timespec instead), and should be used with great care when
converting existing interfaces from timeval, to be sure they don't suffer
from the y2038 overflow, and only with consensus for the particular user
that using __kernel_old_timeval is better than moving to a 64-bit based
interface. The structure name is intentionally chosen to not conflict
with user space types, and to be ugly enough to discourage its use.
Note that ioctl based interfaces that pass a bare 'timeval' pointer
cannot change to '__kernel_old_timeval' because the user space source
code refers to 'timeval' instead, and we don't want to modify the user
space sources if possible. However, any application that relies on a
structure to contain an embedded 'timeval' (e.g. by passing a pointer
to the member into a function call that expects a timeval pointer) is
broken when that structure gets converted to __kernel_old_timeval. I
don't see any way around that, and we have to rely on the compiler to
produce a warning or compile failure that will alert users when they
recompile their sources against a new libc.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20180315161739.576085-1-arnd@arndb.de
Now that th MONOTONIC and BOOTTIME clocks are indentical remove all the special
casing.
The user space visible interfaces still support both clocks, but their behavior
is identical.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20180301165150.410218515@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that the MONOTONIC and BOOTTIME clocks are indentical remove all the special
casing.
The user space visible interfaces still support both clocks, but their behavior
is identical.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20180301165150.315745557@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that the MONOTONIC and BOOTTIME clocks are the same, remove all the
special handling from timekeeping. Keep wrappers for the existing users of
the *boot* timekeeper interfaces.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20180301165150.236279497@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The MONOTONIC clock is not fast forwarded by the time spent in suspend on
resume. This is only done for the BOOTTIME clock. The reason why the
MONOTONIC clock is not forwarded is historical: the original Linux
implementation was using jiffies as a base for the MONOTONIC clock and
jiffies have never been advanced after resume.
At some point when timekeeping was unified in the core code, the
MONONOTIC clock was advanced after resume which also advanced jiffies causing
interesting side effects. As a consequence the the MONOTONIC clock forwarding
was disabled again and the BOOTTIME clock was introduced, which allows to read
time since boot.
Back then it was not possible to completely distangle the MONOTONIC clock and
jiffies because there were still interfaces which exposed the MONOTONIC clock
behaviour based on the timer wheel and therefore jiffies.
As of today none of the MONOTONIC clock facilities depends on jiffies
anymore so the forwarding can be done seperately. This is achieved by
forwarding the variables which are used for the jiffies update after resume
before the tick is restarted,
In timekeeping resume, the change is rather simple. Instead of updating the
offset between the MONOTONIC clock and the REALTIME/BOOTTIME clocks, advance the
time keeper base for the MONOTONIC and the MONOTONIC_RAW clocks by the time
spent in suspend.
The MONOTONIC clock is now the same as the BOOTTIME clock and the offset between
the REALTIME and the MONOTONIC clocks is the same as before suspend.
There might be side effects in applications, which rely on the
(unfortunately) well documented behaviour of the MONOTONIC clock, but the
downsides of the existing behaviour are probably worse.
There is one obvious issue. Up to now it was possible to retrieve the time
spent in suspend by observing the delta between the MONOTONIC clock and the
BOOTTIME clock. This is not longer available, but the previously introduced
mechanism to read the active non-suspended monotonic time can mitigate that
in a detectable fashion.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20180301165150.062975504@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The planned change to unify the behaviour of the MONOTONIC and BOOTTIME
clocks vs. suspend removes the ability to retrieve the active
non-suspended time of a system.
Provide a new CLOCK_MONOTONIC_ACTIVE clock which returns the active
non-suspended time of the system via clock_gettime().
This preserves the old behaviour of CLOCK_MONOTONIC before the
BOOTTIME/MONOTONIC unification.
This new clock also allows applications to detect programmatically that
the MONOTONIC and BOOTTIME clocks are identical.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20180301165149.965235774@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull RCU updates from Paul E. McKenney:
- Miscellaneous fixes, perhaps most notably removing obsolete
code whose only purpose in life was to gather information for
the now-removed RCU debugfs facility. Other notable changes
include removing NO_HZ_FULL_ALL in favor of the nohz_full kernel
boot parameter, minor optimizations for expedited grace periods,
some added tracing, creating an RCU-specific workqueue using Tejun's
new WQ_MEM_RECLAIM flag, and several cleanups to code and comments.
- SRCU cleanups and optimizations.
- Torture-test updates, perhaps most notably the adding of ARMv8
support, but also including numerous cleanups and usability fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When the length of the NTP tick changes significantly, e.g. when an
NTP/PTP application is correcting the initial offset of the clock, a
large value may accumulate in the NTP error before the multiplier
converges to the correct value. It may then take a very long time (hours
or even days) before the error is corrected. This causes the clock to
have an unstable frequency offset, which has a negative impact on the
stability of synchronization with precise time sources (e.g. NTP/PTP
using hardware timestamping or the PTP KVM clock).
Use division to determine the correct multiplier directly from the NTP
tick length and replace the iterative approach. This removes the last
major source of the NTP error. The only remaining source is now limited
resolution of the multiplier, which is corrected by adding 1 to the
multiplier when the system clock is behind the NTP time.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1520620971-9567-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When the timekeeping multiplier is changed, the NTP error is updated to
correct the clock for the delay between the tick and the update of the
clock. This error is corrected in later updates and the clock appears as
if the frequency was changed exactly on the tick.
Remove this correction to keep the point where the frequency is
effectively changed at the time of the update. This removes a major
source of the NTP error.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1520620971-9567-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The primary observation is that nohz enter/exit is always from the
current CPU, therefore NOHZ_TICK_STOPPED does not in fact need to be
an atomic.
Secondary is that we appear to have 2 nearly identical hooks in the
nohz enter code, set_cpu_sd_state_idle() and
nohz_balance_enter_idle(). Fold the whole set_cpu_sd_state thing into
nohz_balance_{enter,exit}_idle.
Removes an atomic op from both enter and exit paths.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On CPU hotunplug the enqueued timers of the unplugged CPU are migrated to a
live CPU. This happens from the control thread which initiated the unplug.
If the CPU on which the control thread runs came out from a longer idle
period then the base clock of that CPU might be stale because the control
thread runs prior to any event which forwards the clock.
In such a case the timers from the unplugged CPU are queued on the live CPU
based on the stale clock which can cause large delays due to increased
granularity of the outer timer wheels which are far away from base:;clock.
But there is a worse problem than that. The following sequence of events
illustrates it:
- CPU0 timer1 is queued expires = 59969 and base->clk = 59131.
The timer is queued at wheel level 2, with resulting expiry time = 60032
(due to level granularity).
- CPU1 enters idle @60007, with next timer expiry @60020.
- CPU0 is hotplugged at @60009
- CPU1 exits idle and runs the control thread which migrates the
timers from CPU0
timer1 is now queued in level 0 for immediate handling in the next
softirq because the requested expiry time 59969 is before CPU1 base->clk
60007
- CPU1 runs code which forwards the base clock which succeeds because the
next expiring timer. which was collected at idle entry time is still set
to 60020.
So it forwards beyond 60007 and therefore misses to expire the migrated
timer1. That timer gets expired when the wheel wraps around again, which
takes between 63 and 630ms depending on the HZ setting.
Address both problems by invoking forward_timer_base() for the control CPUs
timer base. All other places, which might run into a similar problem
(mod_timer()/add_timer_on()) already invoke forward_timer_base() to avoid
that.
[ tglx: Massaged comment and changelog ]
Fixes: a683f390b9 ("timers: Forward the wheel clock whenever possible")
Co-developed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: linux-arm-msm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180118115022.6368-1-clingutla@codeaurora.org
Now that the 1Hz tick is offloaded to workqueues, we can safely remove
the residual code that used to handle it locally.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1519186649-3242-7-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This check is racy but provides a good heuristic to determine whether
a CPU may need a remote tick or not.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1519186649-3242-4-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It makes this function more self-explanatory about what it does and how
to use it.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1519186649-3242-3-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 6f1982fedd ("sched/isolation: Handle the nohz_full= parameter")
broke CONFIG_NO_HZ_FULL_ALL=y kernels. This breakage is due to the code
under CONFIG_NO_HZ_FULL_ALL failing to invoke the shiny new housekeeping
functions. This means that rcutorture scenario TREE04 now emits RCU CPU
stall warnings due to the RCU grace-period kthreads not being awakened
at a time of their choosing, or perhaps even not at all:
[ 27.731422] rcu_bh kthread starved for 21001 jiffies! g18446744073709551369 c18446744073709551368 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x402 ->cpu=3
[ 27.731423] rcu_bh I14936 9 2 0x80080000
[ 27.731435] Call Trace:
[ 27.731440] __schedule+0x31a/0x6d0
[ 27.731442] schedule+0x31/0x80
[ 27.731446] schedule_timeout+0x15a/0x320
[ 27.731453] ? call_timer_fn+0x130/0x130
[ 27.731457] rcu_gp_kthread+0x66c/0xea0
[ 27.731458] ? rcu_gp_kthread+0x66c/0xea0
Because no one has complained about CONFIG_NO_HZ_FULL_ALL=y being broken,
I hypothesize that no one is in fact using it, other than rcutorture.
This commit therefore eliminates CONFIG_NO_HZ_FULL_ALL and updates
rcutorture's config files to instead use the nohz_full= kernel parameter
to put the desired CPUs into nohz_full mode.
Fixes: 6f1982fedd ("sched/isolation: Handle the nohz_full= parameter")
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
hrtimer does not seem to use any of kallsyms functions/defines.
Link: http://lkml.kernel.org/r/20171208025616.16267-9-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
Pull siginfo cleanups from Eric Biederman:
"Long ago when 2.4 was just a testing release copy_siginfo_to_user was
made to copy individual fields to userspace, possibly for efficiency
and to ensure initialized values were not copied to userspace.
Unfortunately the design was complex, it's assumptions unstated, and
humans are fallible and so while it worked much of the time that
design failed to ensure unitialized memory is not copied to userspace.
This set of changes is part of a new design to clean up siginfo and
simplify things, and hopefully make the siginfo handling robust enough
that a simple inspection of the code can be made to ensure we don't
copy any unitializied fields to userspace.
The design is to unify struct siginfo and struct compat_siginfo into a
single definition that is shared between all architectures so that
anyone adding to the set of information shared with struct siginfo can
see the whole picture. Hopefully ensuring all future si_code
assignments are arch independent.
The design is to unify copy_siginfo_to_user32 and
copy_siginfo_from_user32 so that those function are complete and cope
with all of the different cases documented in signinfo_layout. I don't
think there was a single implementation of either of those functions
that was complete and correct before my changes unified them.
The design is to introduce a series of helpers including
force_siginfo_fault that take the values that are needed in struct
siginfo and build the siginfo structure for their callers. Ensuring
struct siginfo is built correctly.
The remaining work for 4.17 (unless someone thinks it is post -rc1
material) is to push usage of those helpers down into the
architectures so that architecture specific code will not need to deal
with the fiddly work of intializing struct siginfo, and then when
struct siginfo is guaranteed to be fully initialized change copy
siginfo_to_user into a simple wrapper around copy_to_user.
Further there is work in progress on the issues that have been
documented requires arch specific knowledge to sort out.
The changes below fix or at least document all of the issues that have
been found with siginfo generation. Then proceed to unify struct
siginfo the 32 bit helpers that copy siginfo to and from userspace,
and generally clean up anything that is not arch specific with regards
to siginfo generation.
It is a lot but with the unification you can of siginfo you can
already see the code reduction in the kernel"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits)
signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr
mm/memory_failure: Remove unused trapno from memory_failure
signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed
signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap
signal: Helpers for faults with specialized siginfo layouts
signal: Add send_sig_fault and force_sig_fault
signal: Replace memset(info,...) with clear_siginfo for clarity
signal: Don't use structure initializers for struct siginfo
signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered
ptrace: Use copy_siginfo in setsiginfo and getsiginfo
signal: Unify and correct copy_siginfo_to_user32
signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32
signal: Unify and correct copy_siginfo_from_user32
signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED
signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h
signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h
signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h
signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h
signal/powerpc: Remove redefinition of NSIGTRAP on powerpc
signal: Move addr_lsb into the _sigfault union for clarity
...
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Implement frequency/CPU invariance and OPP selection for
SCHED_DEADLINE (Juri Lelli)
- Tweak the task migration logic for better multi-tasking
workload scalability (Mel Gorman)
- Misc cleanups, fixes and improvements"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Make bandwidth enforcement scale-invariant
sched/cpufreq: Move arch_scale_{freq,cpu}_capacity() outside of #ifdef CONFIG_SMP
sched/cpufreq: Remove arch_scale_freq_capacity()'s 'sd' parameter
sched/cpufreq: Always consider all CPUs when deciding next freq
sched/cpufreq: Split utilization signals
sched/cpufreq: Change the worker kthread to SCHED_DEADLINE
sched/deadline: Move CPU frequency selection triggering points
sched/cpufreq: Use the DEADLINE utilization signal
sched/deadline: Implement "runtime overrun signal" support
sched/fair: Only immediately migrate tasks due to interrupts if prev and target CPUs share cache
sched/fair: Correct obsolete comment about cpufreq_update_util()
sched/fair: Remove impossible condition from find_idlest_group_cpu()
sched/cpufreq: Don't pass flags to sugov_set_iowait_boost()
sched/cpufreq: Initialize sg_cpu->flags to 0
sched/fair: Consider RT/IRQ pressure in capacity_spare_wake()
sched/fair: Use 'unsigned long' for utilization, consistently
sched/core: Rework and clarify prepare_lock_switch()
sched/fair: Remove unused 'curr' parameter from wakeup_gran
sched/headers: Constify object_is_on_stack()
The hrtimer interrupt code contains a hang detection and mitigation
mechanism, which prevents that a long delayed hrtimer interrupt causes a
continous retriggering of interrupts which prevent the system from making
progress. If a hang is detected then the timer hardware is programmed with
a certain delay into the future and a flag is set in the hrtimer cpu base
which prevents newly enqueued timers from reprogramming the timer hardware
prior to the chosen delay. The subsequent hrtimer interrupt after the delay
clears the flag and resumes normal operation.
If such a hang happens in the last hrtimer interrupt before a CPU is
unplugged then the hang_detected flag is set and stays that way when the
CPU is plugged in again. At that point the timer hardware is not armed and
it cannot be armed because the hang_detected flag is still active, so
nothing clears that flag. As a consequence the CPU does not receive hrtimer
interrupts and no timers expire on that CPU which results in RCU stalls and
other malfunctions.
Clear the flag along with some other less critical members of the hrtimer
cpu base to ensure starting from a clean state when a CPU is plugged in.
Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the
root cause of that hard to reproduce heisenbug. Once understood it's
trivial and certainly justifies a brown paperbag.
Fixes: 41d2e49493 ("hrtimer: Tune hrtimer_interrupt hang logic")
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Sewior <bigeasy@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801261447590.2067@nanos
kdb is the only user of the __current_kernel_time() interface, which is
not y2038 safe and should be removed at some point.
The kdb code also goes to great lengths to print the time in a
human-readable format from 'struct timespec', again using a non-y2038-safe
re-implementation of the generic time_to_tm() code.
Using __current_kernel_time() here is necessary since the regular
accessors that require a sequence lock might hang when called during the
xtime update. However, this is safe in the particular case since kdb is
only interested in the tv_sec field that is updated atomically.
In order to make this y2038-safe, I'm converting the code to the generic
time64_to_tm helper, but that introduces the problem that we have no
interface like __current_kernel_time() that provides a 64-bit timestamp
in a lockless, safe and architecture-independent way. I have multiple
ideas for how to solve that:
- __ktime_get_real_seconds() is lockless, but can return
incorrect results on 32-bit architectures in the special case that
we are in the process of changing the time across the epoch, either
during the timer tick that overflows the seconds in 2038, or while
calling settimeofday.
- ktime_get_real_fast_ns() would work in this context, but does
require a call into the clocksource driver to return a high-resolution
timestamp. This may have undesired side-effects in the debugger,
since we want to limit the interactions with the rest of the kernel.
- Adding a ktime_get_real_fast_seconds() based on tk_fast_mono
plus tkr->base_real without the tk_clock_read() delta. Not sure about
the value of adding yet another interface here.
- Changing the existing ktime_get_real_seconds() to use
tk_fast_mono on 32-bit architectures rather than xtime_sec. I think
this could work, but am not entirely sure if this is an improvement.
I picked the first of those for simplicity here. It's technically
not correct but probably good enough as the time is only used for the
debugging output and the race will likely never be hit in practice.
Another downside is having to move the declaration into a public header
file.
Let me know if anyone has a different preference.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patchwork.kernel.org/patch/9775309/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
The function clear_siginfo is just a nice wrapper around memset so
this results in no functional change. This change makes mistakes
a little more difficult and it makes it clearer what is going on.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
All prerequisites to handle hrtimers for expiry in either hard or soft
interrupt context are in place.
Add the missing bit in hrtimer_init() which associates the timer to the
hard or the softirq clock base.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-30-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
