2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2025-01-21 12:04:03 +08:00
Commit Graph

8 Commits

Author SHA1 Message Date
Georgi Djakov
f712c554a7 pinctrl: qcom: Make the target processor value configurable
Currently the value used to specify that interrupts from the gpio should
be routed to the application processor is hardcoded for all Qualcomm SoCs.
But the new APQ8084 SoC uses a different value. To resolve this, we make
this value configurable for each SoC. For all existing SoCs we continue
to use the current value, and only for APQ8084 we use the new value.

Suggested-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-04 18:19:31 +02:00
Georgi Djakov
c4f6f9c0f3 pinctrl: qcom: Add APQ8084 pinctrl support
This patchset adds pinctrl support for the Qualcomm APQ8084 platform.

This set of patches adds pinctrl support for the Qualcomm APQ8084 platform.
The first patch adds the pin definitions. The second patch contains the
devicetree binding documentation. The third patch adds the DT node.
The last patch makes the INTR_TARGET_PROC_APPS value configurable and
defines it for each existing SoC.

Tested on IFC6540 board.

Changes since v3:
 - Fixed the sdc valid pin values in the binding documentation - sdc2
   instead of sdc3. (suggested by Bjorn Andersson)

Changes since v2:
 - Fixed some incorrect bits and offsets. (suggested by Bjorn Andersson)
 - Updated binding documentation to follow the format of msm8960.
   (suggested by Bjorn Andersson)
 - Added fourth patch, which removes the hardcoded INTR_TARGET_PROC_APPS
   value and makes it configurable. Also we keep the current value for
   existing SoCs. (suggested by Bjorn Andersson)

Changes since v1:
 - Updated the total number of pins (suggested by Bjorn Andersson)
 - Added the missing pin info (provided by Andy Gross)
 - Updated groups and functions to be consistent with other pinctrls.
   (suggested by Andy Gross)
 - Removed unused functions, qdss and test pins. (suggested by Andy Gross)
 - Updated the documentation with the possible functions.

Reviewed-by: Andy Gross <agross@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-04 18:14:59 +02:00
Linus Walleij
03e9f0cac5 pinctrl: clean up after enable refactoring
commit 2243a87d90
"pinctrl: avoid duplicated calling enable_pinmux_setting for a pin"
removed the .disable callback from the struct pinmux_ops,
making the .enable() callback the only remaining callback.

However .enable() is a bad name as it seems to imply that a
muxing can also be disabled. Rename the callback to .set_mux()
and also take this opportunity to clean out any remaining
mentions of .disable() from the documentation.

Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Acked-by: Fan Wu <fwu@marvell.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-04 10:05:07 +02:00
Pramod Gurav
327455817a pinctrl: qcom: Add support for reset for apq8064
This patch adds support for reset functions to reboot the boards
with soc apq8064.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "Ivan T. Ivanov" <iivanov@mm-sol.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Andy Gross <agross@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-02 14:34:11 +02:00
Pramod Gurav
c6e927a274 pinctrl: qcom: remove gpiochip in failure cases
This patch releases gpiochip related resources by calling
gpiochip_remove when either of gpiochip_add_pin_range and
gpiochip_irqchip_add fails.

CC: Linus Walleij <linus.walleij@linaro.org>
CC: "Ivan T. Ivanov" <iivanov@mm-sol.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-02 14:27:40 +02:00
Andrey Utkin
1c34955102 pinctrl: msm: drop negativity check on unsigned value
[linux-3.16-rc5/drivers/pinctrl/pinctrl-msm.c:145]: (style) Checking if
unsigned variable 'mux_bit' is less than zero.

    if (WARN_ON(g->mux_bit < 0))
        return -EINVAL;

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80491
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-23 15:24:40 +02:00
Bjorn Andersson
144ef62645 pinctrl: qcom: Make muxing of gpio function explicit
Instead of relying on pinmux->disable(), make the gpio function an
explicit function for all pins that supports it.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-22 16:31:58 +02:00
Linus Walleij
69b78b8de6 pinctrl: msm: move all qualcomm drivers to subdir
We have four Qualcomm-related pin control drivers, and now there
are drivers coming in for the PMICs on these systems, so let's
create a qcom subdirectory to hold all the Qualcomm stuff.

Acked-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11 14:08:38 +02:00