mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 22:53:55 +08:00
01c0bfe061
50 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Vlastimil Babka
|
002ae70570 |
mm, dump_page(): do not crash with invalid mapping pointer
We have seen a following problem on a RPi4 with 1G RAM: BUG: Bad page state in process systemd-hwdb pfn:35601 page:ffff7e0000d58040 refcount:15 mapcount:131221 mapping:efd8fe765bc80080 index:0x1 compound_mapcount: -32767 Unable to handle kernel paging request at virtual address efd8fe765bc80080 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [efd8fe765bc80080] address between user and kernel address ranges Internal error: Oops: 96000004 [#1] SMP Modules linked in: btrfs libcrc32c xor xor_neon zlib_deflate raid6_pq mmc_block xhci_pci xhci_hcd usbcore sdhci_iproc sdhci_pltfm sdhci mmc_core clk_raspberrypi gpio_raspberrypi_exp pcie_brcmstb bcm2835_dma gpio_regulator phy_generic fixed sg scsi_mod efivarfs Supported: No, Unreleased kernel CPU: 3 PID: 408 Comm: systemd-hwdb Not tainted 5.3.18-8-default #1 SLE15-SP2 (unreleased) Hardware name: raspberrypi rpi/rpi, BIOS 2020.01 02/21/2020 pstate: 40000085 (nZcv daIf -PAN -UAO) pc : __dump_page+0x268/0x368 lr : __dump_page+0xc4/0x368 sp : ffff000012563860 x29: ffff000012563860 x28: ffff80003ddc4300 x27: 0000000000000010 x26: 000000000000003f x25: ffff7e0000d58040 x24: 000000000000000f x23: efd8fe765bc80080 x22: 0000000000020095 x21: efd8fe765bc80080 x20: ffff000010ede8b0 x19: ffff7e0000d58040 x18: ffffffffffffffff x17: 0000000000000001 x16: 0000000000000007 x15: ffff000011689708 x14: 3030386362353637 x13: 6566386466653a67 x12: 6e697070616d2031 x11: 32323133313a746e x10: 756f6370616d2035 x9 : ffff00001168a840 x8 : ffff00001077a670 x7 : 000000000000013d x6 : ffff0000118a43b5 x5 : 0000000000000001 x4 : ffff80003dd9e2c8 x3 : ffff80003dd9e2c8 x2 : 911c8d7c2f483500 x1 : dead000000000100 x0 : efd8fe765bc80080 Call trace: __dump_page+0x268/0x368 bad_page+0xd4/0x168 check_new_page_bad+0x80/0xb8 rmqueue_bulk.constprop.26+0x4d8/0x788 get_page_from_freelist+0x4d4/0x1228 __alloc_pages_nodemask+0x134/0xe48 alloc_pages_vma+0x198/0x1c0 do_anonymous_page+0x1a4/0x4d8 __handle_mm_fault+0x4e8/0x560 handle_mm_fault+0x104/0x1e0 do_page_fault+0x1e8/0x4c0 do_translation_fault+0xb0/0xc0 do_mem_abort+0x50/0xb0 el0_da+0x24/0x28 Code: f9401025 8b8018a0 9a851005 17ffffca (f94002a0) Besides the underlying issue with page->mapping containing a bogus value for some reason, we can see that __dump_page() crashed by trying to read the pointer at mapping->host, turning a recoverable warning into full Oops. It can be expected that when page is reported as bad state for some reason, the pointers there should not be trusted blindly. So this patch treats all data in __dump_page() that depends on page->mapping as lava, using probe_kernel_read_strict(). Ideally this would include the dentry->d_parent recursively, but that would mean changing printk handler for %pd. Chances of reaching the dentry printing part with an initially bogus mapping pointer should be rather low, though. Also prefix printing mapping->a_ops with a description of what is being printed. In case the value is bogus, %ps will print raw value instead of the symbol name and then it's not obvious at all that it's printing a_ops. Reported-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: John Hubbard <jhubbard@nvidia.com> Link: http://lkml.kernel.org/r/20200331165454.12263-1-vbabka@suse.cz Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
John Hubbard
|
dc8fb2f282 |
mm: dump_page(): additional diagnostics for huge pinned pages
As part of pin_user_pages() and related API calls, pages are "dma-pinned". For the case of compound pages of order > 1, the per-page accounting of dma pins is accomplished via the 3rd struct page in the compound page. In order to support debugging of any pin_user_pages()- related problems, enhance dump_page() so as to report the pin count in that case. Documentation/core-api/pin_user_pages.rst is also updated accordingly. Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Link: http://lkml.kernel.org/r/20200211001536.1027652-13-jhubbard@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Matthew Wilcox (Oracle)
|
6197ab984b |
mm: improve dump_page() for compound pages
There was no protection against a corrupted struct page having an implausible compound_head(). Sanity check that a compound page has a head within reach of the maximum allocatable page (this will need to be adjusted if one of the plans to allocate 1GB pages comes to fruition). In addition, - Print the mapping pointer using %p insted of %px. The actual value of the pointer can be read out of the raw page dump and using %p gives a chance to correlate it with an earlier printk of the mapping pointer - Print the mapping pointer from the head page, not the tail page (the tail ->mapping pointer may be in use for other purposes, eg part of a list_head) - Print the order of the page for compound pages - Dump the raw head page as well as the raw page - Print the refcount from the head page, not the tail page Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Co-developed-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Link: http://lkml.kernel.org/r/20200211001536.1027652-12-jhubbard@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Qian Cai
|
4a55c0474a |
mm/hotplug: silence a lockdep splat with printk()
It is not that hard to trigger lockdep splats by calling printk from under zone->lock. Most of them are false positives caused by lock chains introduced early in the boot process and they do not cause any real problems (although most of the early boot lock dependencies could happen after boot as well). There are some console drivers which do allocate from the printk context as well and those should be fixed. In any case, false positives are not that trivial to workaround and it is far from optimal to lose lockdep functionality for something that is a non-issue. So change has_unmovable_pages() so that it no longer calls dump_page() itself - instead it returns a "struct page *" of the unmovable page back to the caller so that in the case of a has_unmovable_pages() failure, the caller can call dump_page() after releasing zone->lock. Also, make dump_page() is able to report a CMA page as well, so the reason string from has_unmovable_pages() can be removed. Even though has_unmovable_pages doesn't hold any reference to the returned page this should be reasonably safe for the purpose of reporting the page (dump_page) because it cannot be hotremoved in the context of memory unplug. The state of the page might change but that is the case even with the existing code as zone->lock only plays role for free pages. While at it, remove a similar but unnecessary debug-only printk() as well. A sample of one of those lockdep splats is, WARNING: possible circular locking dependency detected ------------------------------------------------------ test.sh/8653 is trying to acquire lock: ffffffff865a4460 (console_owner){-.-.}, at: console_unlock+0x207/0x750 but task is already holding lock: ffff88883fff3c58 (&(&zone->lock)->rlock){-.-.}, at: __offline_isolated_pages+0x179/0x3e0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&(&zone->lock)->rlock){-.-.}: __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 _raw_spin_lock+0x2f/0x40 rmqueue_bulk.constprop.21+0xb6/0x1160 get_page_from_freelist+0x898/0x22c0 __alloc_pages_nodemask+0x2f3/0x1cd0 alloc_pages_current+0x9c/0x110 allocate_slab+0x4c6/0x19c0 new_slab+0x46/0x70 ___slab_alloc+0x58b/0x960 __slab_alloc+0x43/0x70 __kmalloc+0x3ad/0x4b0 __tty_buffer_request_room+0x100/0x250 tty_insert_flip_string_fixed_flag+0x67/0x110 pty_write+0xa2/0xf0 n_tty_write+0x36b/0x7b0 tty_write+0x284/0x4c0 __vfs_write+0x50/0xa0 vfs_write+0x105/0x290 redirected_tty_write+0x6a/0xc0 do_iter_write+0x248/0x2a0 vfs_writev+0x106/0x1e0 do_writev+0xd4/0x180 __x64_sys_writev+0x45/0x50 do_syscall_64+0xcc/0x76c entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #2 (&(&port->lock)->rlock){-.-.}: __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 _raw_spin_lock_irqsave+0x3a/0x50 tty_port_tty_get+0x20/0x60 tty_port_default_wakeup+0xf/0x30 tty_port_tty_wakeup+0x39/0x40 uart_write_wakeup+0x2a/0x40 serial8250_tx_chars+0x22e/0x440 serial8250_handle_irq.part.8+0x14a/0x170 serial8250_default_handle_irq+0x5c/0x90 serial8250_interrupt+0xa6/0x130 __handle_irq_event_percpu+0x78/0x4f0 handle_irq_event_percpu+0x70/0x100 handle_irq_event+0x5a/0x8b handle_edge_irq+0x117/0x370 do_IRQ+0x9e/0x1e0 ret_from_intr+0x0/0x2a cpuidle_enter_state+0x156/0x8e0 cpuidle_enter+0x41/0x70 call_cpuidle+0x5e/0x90 do_idle+0x333/0x370 cpu_startup_entry+0x1d/0x1f start_secondary+0x290/0x330 secondary_startup_64+0xb6/0xc0 -> #1 (&port_lock_key){-.-.}: __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 _raw_spin_lock_irqsave+0x3a/0x50 serial8250_console_write+0x3e4/0x450 univ8250_console_write+0x4b/0x60 console_unlock+0x501/0x750 vprintk_emit+0x10d/0x340 vprintk_default+0x1f/0x30 vprintk_func+0x44/0xd4 printk+0x9f/0xc5 -> #0 (console_owner){-.-.}: check_prev_add+0x107/0xea0 validate_chain+0x8fc/0x1200 __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 console_unlock+0x269/0x750 vprintk_emit+0x10d/0x340 vprintk_default+0x1f/0x30 vprintk_func+0x44/0xd4 printk+0x9f/0xc5 __offline_isolated_pages.cold.52+0x2f/0x30a offline_isolated_pages_cb+0x17/0x30 walk_system_ram_range+0xda/0x160 __offline_pages+0x79c/0xa10 offline_pages+0x11/0x20 memory_subsys_offline+0x7e/0xc0 device_offline+0xd5/0x110 state_store+0xc6/0xe0 dev_attr_store+0x3f/0x60 sysfs_kf_write+0x89/0xb0 kernfs_fop_write+0x188/0x240 __vfs_write+0x50/0xa0 vfs_write+0x105/0x290 ksys_write+0xc6/0x160 __x64_sys_write+0x43/0x50 do_syscall_64+0xcc/0x76c entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: console_owner --> &(&port->lock)->rlock --> &(&zone->lock)->rlock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&zone->lock)->rlock); lock(&(&port->lock)->rlock); lock(&(&zone->lock)->rlock); lock(console_owner); *** DEADLOCK *** 9 locks held by test.sh/8653: #0: ffff88839ba7d408 (sb_writers#4){.+.+}, at: vfs_write+0x25f/0x290 #1: ffff888277618880 (&of->mutex){+.+.}, at: kernfs_fop_write+0x128/0x240 #2: ffff8898131fc218 (kn->count#115){.+.+}, at: kernfs_fop_write+0x138/0x240 #3: ffffffff86962a80 (device_hotplug_lock){+.+.}, at: lock_device_hotplug_sysfs+0x16/0x50 #4: ffff8884374f4990 (&dev->mutex){....}, at: device_offline+0x70/0x110 #5: ffffffff86515250 (cpu_hotplug_lock.rw_sem){++++}, at: __offline_pages+0xbf/0xa10 #6: ffffffff867405f0 (mem_hotplug_lock.rw_sem){++++}, at: percpu_down_write+0x87/0x2f0 #7: ffff88883fff3c58 (&(&zone->lock)->rlock){-.-.}, at: __offline_isolated_pages+0x179/0x3e0 #8: ffffffff865a4920 (console_lock){+.+.}, at: vprintk_emit+0x100/0x340 stack backtrace: Hardware name: HPE ProLiant DL560 Gen10/ProLiant DL560 Gen10, BIOS U34 05/21/2019 Call Trace: dump_stack+0x86/0xca print_circular_bug.cold.31+0x243/0x26e check_noncircular+0x29e/0x2e0 check_prev_add+0x107/0xea0 validate_chain+0x8fc/0x1200 __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 console_unlock+0x269/0x750 vprintk_emit+0x10d/0x340 vprintk_default+0x1f/0x30 vprintk_func+0x44/0xd4 printk+0x9f/0xc5 __offline_isolated_pages.cold.52+0x2f/0x30a offline_isolated_pages_cb+0x17/0x30 walk_system_ram_range+0xda/0x160 __offline_pages+0x79c/0xa10 offline_pages+0x11/0x20 memory_subsys_offline+0x7e/0xc0 device_offline+0xd5/0x110 state_store+0xc6/0xe0 dev_attr_store+0x3f/0x60 sysfs_kf_write+0x89/0xb0 kernfs_fop_write+0x188/0x240 __vfs_write+0x50/0xa0 vfs_write+0x105/0x290 ksys_write+0xc6/0x160 __x64_sys_write+0x43/0x50 do_syscall_64+0xcc/0x76c entry_SYSCALL_64_after_hwframe+0x49/0xbe Link: http://lkml.kernel.org/r/20200117181200.20299-1-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
5b57b8f227 |
mm/debug.c: always print flags in dump_page()
Commit |
||
Jason Gunthorpe
|
984cfe4e25 |
mm/mmu_notifier: Rename struct mmu_notifier_mm to mmu_notifier_subscriptions
The name mmu_notifier_mm implies that the thing is a mm_struct pointer, and is difficult to abbreviate. The struct is actually holding the interval tree and hlist containing the notifiers subscribed to a mm. Use 'subscriptions' as the variable name for this struct instead of the really terrible and misleading 'mmn_mm'. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
Ralph Campbell
|
6855ac4acd |
mm/debug.c: PageAnon() is true for PageKsm() pages
PageAnon() and PageKsm() use the low two bits of the page->mapping
pointer to indicate the page type. PageAnon() only checks the LSB while
PageKsm() checks the least significant 2 bits are equal to 3.
Therefore, PageAnon() is true for KSM pages. __dump_page() incorrectly
will never print "ksm" because it checks PageAnon() first. Fix this by
checking PageKsm() first.
Link: http://lkml.kernel.org/r/20191113000651.20677-1-rcampbell@nvidia.com
Fixes:
|
||
Ralph Campbell
|
76a1850e45 |
mm/debug.c: __dump_page() prints an extra line
When dumping struct page information, __dump_page() prints the page type with a trailing blank followed by the page flags on a separate line: anon flags: 0x100000000090034(uptodate|lru|active|head|swapbacked) It looks like the intent was to use pr_cont() for printing "flags:" but pr_cont() usage is discouraged so fix this by extending the format to include the flags into a single line: anon flags: 0x100000000090034(uptodate|lru|active|head|swapbacked) If the page is file backed, the name might be long so use two lines: shmem_aops name:"dev/zero" flags: 0x10000000008000c(uptodate|dirty|swapbacked) Eliminate pr_conf() usage as well for appending compound_mapcount. Link: http://lkml.kernel.org/r/20191112012608.16926-1-rcampbell@nvidia.com Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Baruch Siach
|
136ac591f0 |
mm: update references to page _refcount
Commit |
||
Oscar Salvador
|
5ae2efb1de |
mm/debug.c: fix __dump_page when mapping->host is not set
While debugging something, I added a dump_page() into do_swap_page(),
and I got the splat from below. The issue happens when dereferencing
mapping->host in __dump_page():
...
else if (mapping) {
pr_warn("%ps ", mapping->a_ops);
if (mapping->host->i_dentry.first) {
struct dentry *dentry;
dentry = container_of(mapping->host->i_dentry.first, struct dentry, d_u.d_alias);
pr_warn("name:\"%pd\" ", dentry);
}
}
...
Swap address space does not contain an inode information, and so
mapping->host equals NULL.
Although the dump_page() call was added artificially into
do_swap_page(), I am not sure if we can hit this from any other path, so
it looks worth fixing it. We can easily do that by checking
mapping->host first.
Link: http://lkml.kernel.org/r/20190318072931.29094-1-osalvador@suse.de
Fixes:
|
||
Qian Cai
|
44dc1b1fab |
mm/debug.c: add a cast to u64 for atomic64_read()
atomic64_read() on ppc64le returns "long int", so fix the same way as commit |
||
Linus Torvalds
|
a50243b1dd |
5.1 Merge Window Pull Request
This has been a slightly more active cycle than normal with ongoing core changes and quite a lot of collected driver updates. - Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe - A new data transfer mode for HFI1 giving higher performance - Significant functional and bug fix update to the mlx5 On-Demand-Paging MR feature - A chip hang reset recovery system for hns - Change mm->pinned_vm to an atomic64 - Update bnxt_re to support a new 57500 chip - A sane netlink 'rdma link add' method for creating rxe devices and fixing the various unregistration race conditions in rxe's unregister flow - Allow lookup up objects by an ID over netlink - Various reworking of the core to driver interface: * Drivers should not assume umem SGLs are in PAGE_SIZE chunks * ucontext is accessed via udata not other means * Start to make the core code responsible for object memory allocation * Drivers should convert struct device to struct ib_device via a helper * Drivers have more tools to avoid use after unregister problems -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAlyAJYYACgkQOG33FX4g mxrWwQ/+OyAx4Moru7Aix0C6GWxTJp/wKgw21CS3reZxgLai6x81xNYG/s2wCNjo IccObVd7mvzyqPdxOeyHBsJBbQDqWvoD6O2duH8cqGMgBRgh3CSdUep2zLvPpSAx 2W1SvWYCLDnCuarboFrCA8c4AN3eCZiqD7z9lHyFQGjy3nTUWzk1uBaOP46uaiMv w89N8EMdXJ/iY6ONzihvE05NEYbMA8fuvosKLLNdghRiHIjbMQU8SneY23pvyPDd ZziPu9NcO3Hw9OVbkwtJp47U3KCBgvKHmnixyZKkikjiD+HVoABw2IMwcYwyBZwP Bic/ddONJUvAxMHpKRnQaW7znAiHARk21nDG28UAI7FWXH/wMXgicMp6LRcNKqKF vqXdxHTKJb0QUR4xrYI+eA8ihstss7UUpgSgByuANJ0X729xHiJtlEvPb1DPo1Dz 9CB4OHOVRl5O8sA5Jc6PSusZiKEpvWoyWbdmw0IiwDF5pe922VLl5Nv88ta+sJ38 v2Ll5AgYcluk7F3599Uh9D7gwp5hxW2Ph3bNYyg2j3HP4/dKsL9XvIJPXqEthgCr 3KQS9rOZfI/7URieT+H+Mlf+OWZhXsZilJG7No0fYgIVjgJ00h3SF1/299YIq6Qp 9W7ZXBfVSwLYA2AEVSvGFeZPUxgBwHrSZ62wya4uFeB1jyoodPk= =p12E -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma updates from Jason Gunthorpe: "This has been a slightly more active cycle than normal with ongoing core changes and quite a lot of collected driver updates. - Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe - A new data transfer mode for HFI1 giving higher performance - Significant functional and bug fix update to the mlx5 On-Demand-Paging MR feature - A chip hang reset recovery system for hns - Change mm->pinned_vm to an atomic64 - Update bnxt_re to support a new 57500 chip - A sane netlink 'rdma link add' method for creating rxe devices and fixing the various unregistration race conditions in rxe's unregister flow - Allow lookup up objects by an ID over netlink - Various reworking of the core to driver interface: - drivers should not assume umem SGLs are in PAGE_SIZE chunks - ucontext is accessed via udata not other means - start to make the core code responsible for object memory allocation - drivers should convert struct device to struct ib_device via a helper - drivers have more tools to avoid use after unregister problems" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (280 commits) net/mlx5: ODP support for XRC transport is not enabled by default in FW IB/hfi1: Close race condition on user context disable and close RDMA/umem: Revert broken 'off by one' fix RDMA/umem: minor bug fix in error handling path RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp cxgb4: kfree mhp after the debug print IB/rdmavt: Fix concurrency panics in QP post_send and modify to error IB/rdmavt: Fix loopback send with invalidate ordering IB/iser: Fix dma_nents type definition IB/mlx5: Set correct write permissions for implicit ODP MR bnxt_re: Clean cq for kernel consumers only RDMA/uverbs: Don't do double free of allocated PD RDMA: Handle ucontext allocations by IB/core RDMA/core: Fix a WARN() message bnxt_re: fix the regression due to changes in alloc_pbl IB/mlx4: Increase the timeout for CM cache IB/core: Abort page fault handler silently during owning process exit IB/mlx5: Validate correct PD before prefetch MR IB/mlx5: Protect against prefetch of invalid MR RDMA/uverbs: Store PR pointer before it is overwritten ... |
||
Robin Murphy
|
311ade0eab |
mm/debug.c: fix __dump_page() for poisoned pages
Evaluating page_mapping() on a poisoned page ends up dereferencing junk
and making PF_POISONED_CHECK() considerably crashier than intended:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000006
Mem abort info:
ESR = 0x96000005
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000005
CM = 0, WnR = 0
user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c2f6ac38
[0000000000000006] pgd=0000000000000000, pud=0000000000000000
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 491 Comm: bash Not tainted 5.0.0-rc1+ #1
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Dec 17 2018
pstate: 00000005 (nzcv daif -PAN -UAO)
pc : page_mapping+0x18/0x118
lr : __dump_page+0x1c/0x398
Process bash (pid: 491, stack limit = 0x000000004ebd4ecd)
Call trace:
page_mapping+0x18/0x118
__dump_page+0x1c/0x398
dump_page+0xc/0x18
remove_store+0xbc/0x120
dev_attr_store+0x18/0x28
sysfs_kf_write+0x40/0x50
kernfs_fop_write+0x130/0x1d8
__vfs_write+0x30/0x180
vfs_write+0xb4/0x1a0
ksys_write+0x60/0xd0
__arm64_sys_write+0x18/0x20
el0_svc_common+0x94/0xf8
el0_svc_handler+0x68/0x70
el0_svc+0x8/0xc
Code: f9400401 d1000422 f240003f 9a801040 (f9400402)
---[ end trace cdb5eb5bf435cecb ]---
Fix that by not inspecting the mapping until we've determined that it's
likely to be valid. Now the above condition still ends up stopping the
kernel, but in the correct manner:
page:ffffffbf20000000 is uninitialized and poisoned
raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
------------[ cut here ]------------
kernel BUG at ./include/linux/mm.h:1006!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 483 Comm: bash Not tainted 5.0.0-rc1+ #3
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Dec 17 2018
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : remove_store+0xbc/0x120
lr : remove_store+0xbc/0x120
...
Link: http://lkml.kernel.org/r/03b53ee9d7e76cda4b9b5e1e31eea080db033396.1550071778.git.robin.murphy@arm.com
Fixes:
|
||
Davidlohr Bueso
|
70f8a3ca68 |
mm: make mm->pinned_vm an atomic64 counter
Taking a sleeping lock to _only_ increment a variable is quite the overkill, and pretty much all users do this. Furthermore, some drivers (ie: infiniband and scif) that need pinned semantics can go to quite some trouble to actually delay via workqueue (un)accounting for pinned pages when not possible to acquire it. By making the counter atomic we no longer need to hold the mmap_sem and can simply some code around it for pinned_vm users. The counter is 64-bit such that we need not worry about overflows such as rdma user input controlled from userspace. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Christoph Lameter <cl@linux.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
Alexey Dobriyan
|
9a2f45ff32 |
mm/debug.c: make "migrate_reason_names[]" const char *
Those strings are immutable as well. Link: http://lkml.kernel.org/r/20181124090508.GB10877@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
e0392cf7c5 |
mm: lower the printk loglevel for __dump_page messages
__dump_page messages use KERN_EMERG resp. KERN_ALERT loglevel (this is the case since 2004). Most callers of this function are really detecting a critical page state and BUG right after. On the other hand the function is called also from contexts which just want to inform about the page state and those would rather not disrupt logs that much (e.g. some systems route these messages to the normal console). Reduce the loglevel to KERN_WARNING to make dump_page easier to reuse for other contexts while those messages will still make it to the kernel log in most setups. Even if the loglevel setup filters warnings away those paths that are really critical already print the more targeted error or panic and that should make it to the kernel log. [mhocko@kernel.org: fix __dump_page()] Link: http://lkml.kernel.org/r/20181212142540.GA7378@dhcp22.suse.cz [akpm@linux-foundation.org: s/KERN_WARN/KERN_WARNING/, per Michal] Link: http://lkml.kernel.org/r/20181107101830.17405-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <OSalvador@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
1c6fb1d89e |
mm: print more information about mapping in __dump_page
I have been promissing to improve memory offlining failures debugging for quite some time. As things stand now we get only very limited information in the kernel log when the offlining fails. It is usually only [ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed with no further details. We do not know what exactly fails and for what reason. Whenever I was forced to debug such a failure I've always had to do a debugging patch to tell me more. We can enable some tracepoints but it would be much better to get a better picture without using them. This patch series does 2 things. The first one is to make dump_page more usable by printing more information about the mapping patch 1. Then it reduces the log level from emerg to warning so that this function is usable from less critical context patch 2. Then I have added more detailed information about the offlining failure patch 4 and finally add dump_page to isolation and offlining migration paths. Patch 3 is a trivial cleanup. This patch (of 6): __dump_page prints the mapping pointer but that is quite unhelpful for many reports because the pointer itself only helps to distinguish anon/ksm mappings from other ones (because of lowest bits set). Sometimes it would be much more helpful to know what kind of mapping that is actually and if we know this is a file mapping then also try to resolve the dentry name. [dan.carpenter@oracle.com: fix a width vs precision bug in printk] Link: http://lkml.kernel.org/r/20181123072135.gqvblm2vdujbvfjs@kili.mountain [mhocko@kernel.org: use %dp to print dentry] Link: http://lkml.kernel.org/r/20181125080834.GB12455@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20181107101830.17405-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Oscar Salvador <OSalvador@suse.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Alexander Duyck
|
f682a97a00 |
mm: provide kernel parameter to allow disabling page init poisoning
Patch series "Address issues slowing persistent memory initialization", v5. The main thing this patch set achieves is that it allows us to initialize each node worth of persistent memory independently. As a result we reduce page init time by about 2 minutes because instead of taking 30 to 40 seconds per node and going through each node one at a time, we process all 4 nodes in parallel in the case of a 12TB persistent memory setup spread evenly over 4 nodes. This patch (of 3): On systems with a large amount of memory it can take a significant amount of time to initialize all of the page structs with the PAGE_POISON_PATTERN value. I have seen it take over 2 minutes to initialize a system with over 12TB of RAM. In order to work around the issue I had to disable CONFIG_DEBUG_VM and then the boot time returned to something much more reasonable as the arch_add_memory call completed in milliseconds versus seconds. However in doing that I had to disable all of the other VM debugging on the system. In order to work around a kernel that might have CONFIG_DEBUG_VM enabled on a system that has a large amount of memory I have added a new kernel parameter named "vm_debug" that can be set to "-" in order to disable it. Link: http://lkml.kernel.org/r/20180925201921.3576.84239.stgit@localhost.localdomain Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
7a9cdebdcc |
mm: get rid of vmacache_flush_all() entirely
Jann Horn points out that the vmacache_flush_all() function is not only potentially expensive, it's buggy too. It also happens to be entirely unnecessary, because the sequence number overflow case can be avoided by simply making the sequence number be 64-bit. That doesn't even grow the data structures in question, because the other adjacent fields are already 64-bit. So simplify the whole thing by just making the sequence number overflow case go away entirely, which gets rid of all the complications and makes the code faster too. Win-win. [ Oleg Nesterov points out that the VMACACHE_FULL_FLUSHES statistics also just goes away entirely with this ] Reported-by: Jann Horn <jannh@google.com> Suggested-by: Will Deacon <will.deacon@arm.com> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Pavel Tatashin
|
fc36def997 |
mm: teach dump_page() to correctly output poisoned struct pages
If struct page is poisoned, and uninitialized access is detected via
PF_POISONED_CHECK(page) dump_page() is called to output the page. But,
the dump_page() itself accesses struct page to determine how to print
it, and therefore gets into a recursive loop.
For example:
dump_page()
__dump_page()
PageSlab(page)
PF_POISONED_CHECK(page)
VM_BUG_ON_PGFLAGS(PagePoisoned(page), page)
dump_page() recursion loop.
Link: http://lkml.kernel.org/r/20180702180536.2552-1-pasha.tatashin@oracle.com
Fixes:
|
||
Matthew Wilcox
|
152a2d199e |
mm/debug.c: provide useful debugging information for VM_BUG
With the recent addition of hashed kernel pointers, places which need to produce useful debug output have to specify %px, not %p. This patch fixes all the VM debug to use %px. This is appropriate because it's debug output that the user should never be able to trigger, and kernel developers need to see the actual pointers. Link: http://lkml.kernel.org/r/20171219133236.GE13680@bombadil.infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: "Tobin C. Harding" <me@tobin.cc> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Kirill A. Shutemov
|
af5b0f6a09 |
mm: consolidate page table accounting
Currently, we account page tables separately for each page table level, but that's redundant -- we only make use of total memory allocated to page tables for oom_badness calculation. We also provide the information to userspace, but it has dubious value there too. This patch switches page table accounting to single counter. mm->pgtables_bytes is now used to account all page table levels. We use bytes, because page table size for different levels of page table tree may be different. The change has user-visible effect: we don't have VmPMD and VmPUD reported in /proc/[pid]/status. Not sure if anybody uses them. (As alternative, we can always report 0 kB for them.) OOM-killer report is also slightly changed: we now report pgtables_bytes instead of nr_ptes, nr_pmd, nr_puds. Apart from reducing number of counters per-mm, the benefit is that we now calculate oom_badness() more correctly for machines which have different size of page tables depending on level or where page tables are less than a page in size. The only downside can be debuggability because we do not know which page table level could leak. But I do not remember many bugs that would be caught by separate counters so I wouldn't lose sleep over this. [akpm@linux-foundation.org: fix mm/huge_memory.c] Link: http://lkml.kernel.org/r/20171006100651.44742-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> [kirill.shutemov@linux.intel.com: fix build] Link: http://lkml.kernel.org/r/20171016150113.ikfxy3e7zzfvsr4w@black.fi.intel.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Kirill A. Shutemov
|
c4812909f5 |
mm: introduce wrappers to access mm->nr_ptes
Let's add wrappers for ->nr_ptes with the same interface as for nr_pmd and nr_pud. The patch also makes nr_ptes accounting dependent onto CONFIG_MMU. Page table accounting doesn't make sense if you don't have page tables. It's preparation for consolidation of page-table counters in mm_struct. Link: http://lkml.kernel.org/r/20171006100651.44742-1-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Kirill A. Shutemov
|
b4e98d9ac7 |
mm: account pud page tables
On a machine with 5-level paging support a process can allocate
significant amount of memory and stay unnoticed by oom-killer and memory
cgroup. The trick is to allocate a lot of PUD page tables. We don't
account PUD page tables, only PMD and PTE.
We already addressed the same issue for PMD page tables, see commit
|
||
Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Minchan Kim
|
0a2dd266dd |
mm: make tlb_flush_pending global
Currently, tlb_flush_pending is used only for CONFIG_[NUMA_BALANCING| COMPACTION] but upcoming patches to solve subtle TLB flush batching problem will use it regardless of compaction/NUMA so this patch doesn't remove the dependency. [akpm@linux-foundation.org: remove more ifdefs from world's ugliest printk statement] Link: http://lkml.kernel.org/r/20170802000818.4760-6-namit@vmware.com Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Nadav Amit
|
16af97dc5a |
mm: migrate: prevent racy access to tlb_flush_pending
Patch series "fixes of TLB batching races", v6.
It turns out that Linux TLB batching mechanism suffers from various
races. Races that are caused due to batching during reclamation were
recently handled by Mel and this patch-set deals with others. The more
fundamental issue is that concurrent updates of the page-tables allow
for TLB flushes to be batched on one core, while another core changes
the page-tables. This other core may assume a PTE change does not
require a flush based on the updated PTE value, while it is unaware that
TLB flushes are still pending.
This behavior affects KSM (which may result in memory corruption) and
MADV_FREE and MADV_DONTNEED (which may result in incorrect behavior). A
proof-of-concept can easily produce the wrong behavior of MADV_DONTNEED.
Memory corruption in KSM is harder to produce in practice, but was
observed by hacking the kernel and adding a delay before flushing and
replacing the KSM page.
Finally, there is also one memory barrier missing, which may affect
architectures with weak memory model.
This patch (of 7):
Setting and clearing mm->tlb_flush_pending can be performed by multiple
threads, since mmap_sem may only be acquired for read in
task_numa_work(). If this happens, tlb_flush_pending might be cleared
while one of the threads still changes PTEs and batches TLB flushes.
This can lead to the same race between migration and
change_protection_range() that led to the introduction of
tlb_flush_pending. The result of this race was data corruption, which
means that this patch also addresses a theoretically possible data
corruption.
An actual data corruption was not observed, yet the race was was
confirmed by adding assertion to check tlb_flush_pending is not set by
two threads, adding artificial latency in change_protection_range() and
using sysctl to reduce kernel.numa_balancing_scan_delay_ms.
Link: http://lkml.kernel.org/r/20170802000818.4760-2-namit@vmware.com
Fixes:
|
||
Vlastimil Babka
|
46e8a3a08c |
mm, debug: print raw struct page data in __dump_page()
__dump_page() is used when a page metadata inconsistency is detected, either by standard runtime checks, or extra checks in CONFIG_DEBUG_VM builds. It prints some of the relevant metadata, but not the whole struct page, which is based on unions and interpretation is dependent on the context. This means that sometimes e.g. a VM_BUG_ON_PAGE() checks certain field, which is however not printed by __dump_page() and the resulting bug report may then lack clues that could help in determining the root cause. This patch solves the problem by simply printing the whole struct page word by word, so no part is missing, but the interpretation of the data is left to developers. This is similar to e.g. x86_64 raw stack dumps. Example output: page:ffffea00000475c0 count:1 mapcount:0 mapping: (null) index:0x0 flags: 0x100000000000400(reserved) raw: 0100000000000400 0000000000000000 0000000000000000 00000001ffffffff raw: ffffea00000475e0 ffffea00000475e0 0000000000000000 0000000000000000 page dumped because: VM_BUG_ON_PAGE(1) [aryabinin@virtuozzo.com: suggested print_hex_dump()] Link: http://lkml.kernel.org/r/2ff83214-70fe-741e-bf05-fe4a4073ec3e@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Kirill A. Shutemov
|
9996f05eac |
mm: clarify why we avoid page_mapcount() for slab pages in dump_page()
Let's add comment on why we skip page_mapcount() for sl[aou]b pages. Link: http://lkml.kernel.org/r/20160922105532.GB24593@node Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Kirill A. Shutemov
|
4d35427ad7 |
mm: avoid endless recursion in dump_page()
dump_page() uses page_mapcount() to get mapcount of the page. page_mapcount() has VM_BUG_ON_PAGE(PageSlab(page)) as mapcount doesn't make sense for slab pages and the field in struct page used for other information. It leads to recursion if dump_page() called for slub page and DEBUG_VM is enabled: dump_page() -> page_mapcount() -> VM_BUG_ON_PAGE() -> dump_page -> ... Let's avoid calling page_mapcount() for slab pages in dump_page(). Link: http://lkml.kernel.org/r/20160908082137.131076-1-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Joonsoo Kim
|
fe896d1878 |
mm: introduce page reference manipulation functions
The success of CMA allocation largely depends on the success of migration and key factor of it is page reference count. Until now, page reference is manipulated by direct calling atomic functions so we cannot follow up who and where manipulate it. Then, it is hard to find actual reason of CMA allocation failure. CMA allocation should be guaranteed to succeed so finding offending place is really important. In this patch, call sites where page reference is manipulated are converted to introduced wrapper function. This is preparation step to add tracepoint to each page reference manipulation function. With this facility, we can easily find reason of CMA allocation failure. There is no functional change in this patch. In addition, this patch also converts reference read sites. It will help a second step that renames page._count to something else and prevents later attempt to direct access to it (Suggested by Andrew). Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
ff8e811638 |
mm, debug: move bad flags printing to bad_page()
Since bad_page() is the only user of the badflags parameter of dump_page_badflags(), we can move the code to bad_page() and simplify a bit. The dump_page_badflags() function is renamed to __dump_page() and can still be called separately from dump_page() for temporary debug prints where page_owner info is not desired. The only user-visible change is that page->mem_cgroup is printed before the bad flags. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
4e462112e9 |
mm, page_owner: dump page owner info from dump_page()
The page_owner mechanism is useful for dealing with memory leaks. By reading /sys/kernel/debug/page_owner one can determine the stack traces leading to allocations of all pages, and find e.g. a buggy driver. This information might be also potentially useful for debugging, such as the VM_BUG_ON_PAGE() calls to dump_page(). So let's print the stored info from dump_page(). Example output: page:ffffea000292f1c0 count:1 mapcount:0 mapping:ffff8800b2f6cc18 index:0x91d flags: 0x1fffff8001002c(referenced|uptodate|lru|mappedtodisk) page dumped because: VM_BUG_ON_PAGE(1) page->mem_cgroup:ffff8801392c5000 page allocated via order 0, migratetype Movable, gfp_mask 0x24213ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD|__GFP_NOWARN|__GFP_NORETRY) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b40c8>] alloc_pages_current+0x88/0x120 [<ffffffff8115e386>] __page_cache_alloc+0xe6/0x120 [<ffffffff8116ba6c>] __do_page_cache_readahead+0xdc/0x240 [<ffffffff8116bd05>] ondemand_readahead+0x135/0x260 [<ffffffff8116be9c>] page_cache_async_readahead+0x6c/0x70 [<ffffffff811604c2>] generic_file_read_iter+0x3f2/0x760 [<ffffffff811e0dc7>] __vfs_read+0xa7/0xd0 page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
7cd12b4abf |
mm, page_owner: track and print last migrate reason
During migration, page_owner info is now copied with the rest of the page, so the stacktrace leading to free page allocation during migration is overwritten. For debugging purposes, it might be however useful to know that the page has been migrated since its initial allocation. This might happen many times during the lifetime for different reasons and fully tracking this, especially with stacktraces would incur extra memory costs. As a compromise, store and print the migrate_reason of the last migration that occurred to the page. This is enough to distinguish compaction, numa balancing etc. Example page_owner entry after the patch: Page allocated via order 0, mask 0x24200ca(GFP_HIGHUSER_MOVABLE) PFN 628753 type Movable Block 1228 type Movable Flags 0x1fffff80040030(dirty|lru|swapbacked) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b6325>] alloc_pages_vma+0xb5/0x250 [<ffffffff81177491>] shmem_alloc_page+0x61/0x90 [<ffffffff8117a438>] shmem_getpage_gfp+0x678/0x960 [<ffffffff8117c2b9>] shmem_fallocate+0x329/0x440 [<ffffffff811de600>] vfs_fallocate+0x140/0x230 [<ffffffff811df434>] SyS_fallocate+0x44/0x70 [<ffffffff8158cc2e>] entry_SYSCALL_64_fastpath+0x12/0x71 Page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
b8eceeb990 |
mm, debug: replace dump_flags() with the new printk formats
With the new printk format strings for flags, we can get rid of dump_flags() in mm/debug.c. This also fixes dump_vma() which used dump_flags() for printing vma flags. However dump_flags() did a page-flags specific filtering of bits higher than NR_PAGEFLAGS in order to remove the zone id part. For dump_vma() this resulted in removing several VM_* flags from the symbolic translation. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
edf14cdbf9 |
mm, printk: introduce new format string for flags
In mm we use several kinds of flags bitfields that are sometimes printed for debugging purposes, or exported to userspace via sysfs. To make them easier to interpret independently on kernel version and config, we want to dump also the symbolic flag names. So far this has been done with repeated calls to pr_cont(), which is unreliable on SMP, and not usable for e.g. sysfs export. To get a more reliable and universal solution, this patch extends printk() format string for pointers to handle the page flags (%pGp), gfp_flags (%pGg) and vma flags (%pGv). Existing users of dump_flag_names() are converted and simplified. It would be possible to pass flags by value instead of pointer, but the %p format string for pointers already has extensions for various kernel structures, so it's a good fit, and the extra indirection in a non-critical path is negligible. [linux@rasmusvillemoes.dk: lots of good implementation suggestions] Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
420adbe9fc |
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly format through a macro show_gfp_flags(), which defines a translation array and passes is to __print_flags(). Since the following patch will introduce support for gfp flags printing in printk(), it would be nice to reuse the array. This is not straightforward, since __print_flags() can't simply reference an array defined in a .c file such as mm/debug.c - it has to be a macro to allow the macro magic to communicate the format to userspace tools such as trace-cmd. The solution is to create a macro __def_gfpflag_names which is used both in show_gfp_flags(), and to define the gfpflag_names[] array in mm/debug.c. On the other hand, mm/debug.c also defines translation tables for page flags and vma flags, and desire was expressed (but not implemented in this series) to use these also from tracepoints. Thus, this patch also renames the events/gfpflags.h file to events/mmflags.h and moves the table definitions there, using the same macro approach as for gfpflags. This allows translating all three kinds of mm-specific flags both in tracepoints and printk. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Kirill A. Shutemov
|
53f9263bab |
mm: rework mapcount accounting to enable 4k mapping of THPs
We're going to allow mapping of individual 4k pages of THP compound. It means we need to track mapcount on per small page basis. Straight-forward approach is to use ->_mapcount in all subpages to track how many time this subpage is mapped with PMDs or PTEs combined. But this is rather expensive: mapping or unmapping of a THP page with PMD would require HPAGE_PMD_NR atomic operations instead of single we have now. The idea is to store separately how many times the page was mapped as whole -- compound_mapcount. This frees up ->_mapcount in subpages to track PTE mapcount. We use the same approach as with compound page destructor and compound order to store compound_mapcount: use space in first tail page, ->mapping this time. Any time we map/unmap whole compound page (THP or hugetlb) -- we increment/decrement compound_mapcount. When we map part of compound page with PTE we operate on ->_mapcount of the subpage. page_mapcount() counts both: PTE and PMD mappings of the page. Basically, we have mapcount for a subpage spread over two counters. It makes tricky to detect when last mapcount for a page goes away. We introduced PageDoubleMap() for this. When we split THP PMD for the first time and there's other PMD mapping left we offset up ->_mapcount in all subpages by one and set PG_double_map on the compound page. These additional references go away with last compound_mapcount. This approach provides a way to detect when last mapcount goes away on per small page basis without introducing new overhead for most common cases. [akpm@linux-foundation.org: fix typo in comment] [mhocko@suse.com: ignore partial THP when moving task] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Kirill A. Shutemov
|
3ac808fdd2 |
mm, thp: remove compound_lock()
We are going to use migration entries to stabilize page counts. It means we don't need compound_lock() for that. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Konstantin Khlebnikov
|
8463833590 |
mm: rework virtual memory accounting
When inspecting a vague code inside prctl(PR_SET_MM_MEM) call (which testing the RLIMIT_DATA value to figure out if we're allowed to assign new @start_brk, @brk, @start_data, @end_data from mm_struct) it's been commited that RLIMIT_DATA in a form it's implemented now doesn't do anything useful because most of user-space libraries use mmap() syscall for dynamic memory allocations. Linus suggested to convert RLIMIT_DATA rlimit into something suitable for anonymous memory accounting. But in this patch we go further, and the changes are bundled together as: * keep vma counting if CONFIG_PROC_FS=n, will be used for limits * replace mm->shared_vm with better defined mm->data_vm * account anonymous executable areas as executable * account file-backed growsdown/up areas as stack * drop struct file* argument from vm_stat_account * enforce RLIMIT_DATA for size of data areas This way code looks cleaner: now code/stack/data classification depends only on vm_flags state: VM_EXEC & ~VM_WRITE -> code (VmExe + VmLib in proc) VM_GROWSUP | VM_GROWSDOWN -> stack (VmStk) VM_WRITE & ~VM_SHARED & !stack -> data (VmData) The rest (VmSize - VmData - VmStk - VmExe - VmLib) could be called "shared", but that might be strange beast like readonly-private or VM_IO area. - RLIMIT_AS limits whole address space "VmSize" - RLIMIT_STACK limits stack "VmStk" (but each vma individually) - RLIMIT_DATA now limits "VmData" Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Willy Tarreau <w@1wt.eu> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Kees Cook <keescook@google.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Kirill A. Shutemov
|
1d798ca3f1 |
mm: make compound_head() robust
Hugh has pointed that compound_head() call can be unsafe in some context. There's one example: CPU0 CPU1 isolate_migratepages_block() page_count() compound_head() !!PageTail() == true put_page() tail->first_page = NULL head = tail->first_page alloc_pages(__GFP_COMP) prep_compound_page() tail->first_page = head __SetPageTail(p); !!PageTail() == true <head == NULL dereferencing> The race is pure theoretical. I don't it's possible to trigger it in practice. But who knows. We can fix the race by changing how encode PageTail() and compound_head() within struct page to be able to update them in one shot. The patch introduces page->compound_head into third double word block in front of compound_dtor and compound_order. Bit 0 encodes PageTail() and the rest bits are pointer to head page if bit zero is set. The patch moves page->pmd_huge_pte out of word, just in case if an architecture defines pgtable_t into something what can have the bit 0 set. hugetlb_cgroup uses page->lru.next in the second tail page to store pointer struct hugetlb_cgroup. The patch switch it to use page->private in the second tail page instead. The space is free since ->first_page is removed from the union. The patch also opens possibility to remove HUGETLB_CGROUP_MIN_ORDER limitation, since there's now space in first tail page to store struct hugetlb_cgroup pointer. But that's out of scope of the patch. That means page->compound_head shares storage space with: - page->lru.next; - page->next; - page->rcu_head.next; That's too long list to be absolutely sure, but looks like nobody uses bit 0 of the word. page->rcu_head.next guaranteed[1] to have bit 0 clean as long as we use call_rcu(), call_rcu_bh(), call_rcu_sched(), or call_srcu(). But future call_rcu_lazy() is not allowed as it makes use of the bit and we can get false positive PageTail(). [1] http://lkml.kernel.org/g/20150827163634.GD4029@linux.vnet.ibm.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Eric B Munson
|
de60f5f10c |
mm: introduce VM_LOCKONFAULT
The cost of faulting in all memory to be locked can be very high when working with large mappings. If only portions of the mapping will be used this can incur a high penalty for locking. For the example of a large file, this is the usage pattern for a large statical language model (probably applies to other statical or graphical models as well). For the security example, any application transacting in data that cannot be swapped out (credit card data, medical records, etc). This patch introduces the ability to request that pages are not pre-faulted, but are placed on the unevictable LRU when they are finally faulted in. The VM_LOCKONFAULT flag will be used together with VM_LOCKED and has no effect when set without VM_LOCKED. Setting the VM_LOCKONFAULT flag for a VMA will cause pages faulted into that VMA to be added to the unevictable LRU when they are faulted or if they are already present, but will not cause any missing pages to be faulted in. Exposing this new lock state means that we cannot overload the meaning of the FOLL_POPULATE flag any longer. Prior to this patch it was used to mean that the VMA for a fault was locked. This means we need the new FOLL_MLOCK flag to communicate the locked state of a VMA. FOLL_POPULATE will now only control if the VMA should be populated and in the case of VM_LOCKONFAULT, it will not be set. Signed-off-by: Eric B Munson <emunson@akamai.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vladimir Davydov
|
33c3fc71c8 |
mm: introduce idle page tracking
Knowing the portion of memory that is not used by a certain application or memory cgroup (idle memory) can be useful for partitioning the system efficiently, e.g. by setting memory cgroup limits appropriately. Currently, the only means to estimate the amount of idle memory provided by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the access bit for all pages mapped to a particular process by writing 1 to clear_refs, wait for some time, and then count smaps:Referenced. However, this method has two serious shortcomings: - it does not count unmapped file pages - it affects the reclaimer logic To overcome these drawbacks, this patch introduces two new page flags, Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap. A page's Idle flag can only be set from userspace by setting bit in /sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page, and it is cleared whenever the page is accessed either through page tables (it is cleared in page_referenced() in this case) or using the read(2) system call (mark_page_accessed()). Thus by setting the Idle flag for pages of a particular workload, which can be found e.g. by reading /proc/PID/pagemap, waiting for some time to let the workload access its working set, and then reading the bitmap file, one can estimate the amount of pages that are not used by the workload. The Young page flag is used to avoid interference with the memory reclaimer. A page's Young flag is set whenever the Access bit of a page table entry pointing to the page is cleared by writing to the bitmap file. If page_referenced() is called on a Young page, it will add 1 to its return value, therefore concealing the fact that the Access bit was cleared. Note, since there is no room for extra page flags on 32 bit, this feature uses extended page flags when compiled on 32 bit. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: kpageidle requires an MMU] [akpm@linux-foundation.org: decouple from page-flags rework] Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Steven Rostedt (Red Hat)
|
af658dca22 |
tracing: Rename ftrace_event.h to trace_events.h
The term "ftrace" is really the infrastructure of the function hooks, and not the trace events. Rename ftrace_event.h to trace_events.h to represent the trace_event infrastructure and decouple the term ftrace from it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |
||
Kirill A. Shutemov
|
dc6c9a35b6 |
mm: account pmd page tables to the process
Dave noticed that unprivileged process can allocate significant amount of memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and memory cgroup. The trick is to allocate a lot of PMD page tables. Linux kernel doesn't account PMD tables to the process, only PTE. The use-cases below use few tricks to allocate a lot of PMD page tables while keeping VmRSS and VmPTE low. oom_score for the process will be 0. #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> #include <sys/prctl.h> #define PUD_SIZE (1UL << 30) #define PMD_SIZE (1UL << 21) #define NR_PUD 130000 int main(void) { char *addr = NULL; unsigned long i; prctl(PR_SET_THP_DISABLE); for (i = 0; i < NR_PUD ; i++) { addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); if (addr == MAP_FAILED) { perror("mmap"); break; } *addr = 'x'; munmap(addr, PMD_SIZE); mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0); if (addr == MAP_FAILED) perror("re-mmap"), exit(1); } printf("PID %d consumed %lu KiB in PMD page tables\n", getpid(), i * 4096 >> 10); return pause(); } The patch addresses the issue by account PMD tables to the process the same way we account PTE. The main place where PMD tables is accounted is __pmd_alloc() and free_pmd_range(). But there're few corner cases: - HugeTLB can share PMD page tables. The patch handles by accounting the table to all processes who share it. - x86 PAE pre-allocates few PMD tables on fork. - Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity check on exit(2). Accounting only happens on configuration where PMD page table's level is present (PMD is not folded). As with nr_ptes we use per-mm counter. The counter value is used to calculate baseline for badness score by oom-killer. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: David Rientjes <rientjes@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Kirill A. Shutemov
|
0661a33611 |
mm: remove rest usage of VM_NONLINEAR and pte_file()
One bit in ->vm_flags is unused now! Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Johannes Weiner
|
9edad6ea0f |
mm: move page->mem_cgroup bad page handling into generic code
Now that the external page_cgroup data structure and its lookup is gone, let the generic bad_page() check for page->mem_cgroup sanity. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Tejun Heo <tj@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Andrew Morton
|
7a82ca0d64 |
mm/debug.c: use pr_emerg()
- s/KERN_ALERT/pr_emerg/: we're going BUG so let's maximize the changes of getting the message out. - convert debug.c to pr_foo() Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Sasha Levin
|
31c9afa6db |
mm: introduce VM_BUG_ON_MM
Very similar to VM_BUG_ON_PAGE and VM_BUG_ON_VMA, dump struct_mm when the bug is hit. [akpm@linux-foundation.org: coding-style fixes] [mhocko@suse.cz: fix build] [mhocko@suse.cz: fix build some more] [akpm@linux-foundation.org: do strange things to avoid doing strange things for the comma separators] Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Sasha Levin
|
82742a3a51 |
mm: move debug code out of page_alloc.c
dump_page() and dump_vma() are not specific to page_alloc.c, move them out so page_alloc.c won't turn into the unofficial debug repository. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |