This has been lost in the locking rework for intel_alloc_context_page:
commit 2c34b850ee
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Sat Mar 19 18:14:26 2011 -0700
drm/i915: fix ilk rc6 teardown locking
Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We already print the HWS addresses during init, so do the same for the
pipe control page. Reduces guesswork when looking at hex addresses
later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the previous patch "drm/i915: disable shared panel fitter for
pipe" we now disable the panel fitter at the right spot in the modeset
sequence in the crtc functions on all platforms. Hence the disabling
in intel_disable_lvds is no longer required and potentially harmful
(since the plane is still enabled at this point).
Similarly on the enabling side we enable the panel fitter in the lvds
callback only once the plane is enabled. Which is too late. Hence move
this into a new intel_pre_enable_lvds callback.
Finally we can ditch lvds_encoder->pfit_dirty - this was required to
work around the crtc helper semantics, but with the new i915 modeset
infrastructure we should enable/disable the pfit only when enabling or
disabling the entire output pipeline. So separate state tracking for
the pfit is no longer required.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
[danvet: Bikeshed the commit message a bit to stress that now we
enable/disable the pfit on i9xx platforms at the right point of time
compared to the old code.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If encoder is switched off by BIOS, but the panel fitter is left on,
we never try to turn off the panel fitter and leave it still attached
to the pipe - which can cause blurry output elsewhere.
Based on work by Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58867
Cc: stable@vger.kernel.org
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Tested-by: Andreas Sturmlechner <andreas.sturmlechner@gmail.com>
[danvet: Remove the redundant HAS_PCH_SPLIT check and add a tiny
comment.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some early bios versions seem to ship with the wrong tuning values for
the MCH, possible resulting in pipe underruns under load. Especially
on DP outputs this can lead to black screen, since DP really doesn't
like an occasional whack from an underrun.
Unfortunately the registers seem to be locked after boot, so the only
thing we can do is politely point out issues and suggest a BIOS
upgrade.
Arthur Runyan pointed us at this issue while discussion DP bugs - thus
far no confirmation from a bug report yet that it helps. But at least
some of my machines here have wrong values, so this might be useful in
understanding bug reports.
v2: After a bit more discussion with Art and Ben we've decided to only
the check the watermark values, since the OREF ones could be be a
notch more aggressive on certain machines.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Runyan, Arthur J <arthur.j.runyan@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's not that the assertion is incorrect, but rather that we can call
do_destroy early in loading, and we will falsely BUG().
Since contexts have been in for a while now, and in the internal APIs
are pretty stable, it should be fairly safe to remove this.
v2: Remove unused dev_priv, and dev
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The ring initialization will differ a bit in upcoming generations, and
this split will prepare the code for what's needed.
This patch also fixes a bug introduced in:
commit 9943393195
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Tue Jan 22 14:12:17 2013 +0200
drm/i915: use gem_set_seqno() on hardware init
After doing the extraction, the bad error handling became obvious. I
acknowledge that this should be two patches, but it's a pretty
small/trivial patch. If requested, I can certainly do the fix as a
distinct patch.
v2: Should be cleanup blt, not init blt on failure (Chris)
v3: Forgot to git add on v2
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When I refactored the code initially, I forgot that gen2 uses a
different bar for the CPU mappable aperture. The agp-less code knows
nothing of generations less than 5, so we have to expand the gtt_probe
function to include the mappable base and end.
It was originally broken by me:
commit baa09f5fd8
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Thu Jan 24 13:49:57 2013 -0800
drm/i915: Add probe and remove to the gtt ops
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So we can remove duplicated code. Note that this function is used not
only on IBX, but also CPT and LPT.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Also bikeshed s/ironlake_enable_pch_hotplug/ibx_enable_hotplug
to keep consistent with our ibx for pch naming scheme.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have more than one sprite, so a boolean simply won't cut it.
Turn sprite_scaling_enabled into a bitmask and track the state
of sprite scaler for each sprite independently.
Also don't re-enable LP watermarks until the sprite registers
have actually been written, and thus sprite scaling has really
been disabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
They're physically the same pins and also the same bits, duplicating
only confuses the reader. This also makes it a bit obvious that we
have quite some code duplication going on here. Squashing that is for
a larger rework in our hpd handling though.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This was a rebase error from when the patches originally landed. Since
the context size is unsigned, there is also no use in checking if it's
less than 0.
The existing code is not really wrong, but it's not simple as it should
be.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
770c12312a is the first bad commit
commit 770c12312a
Author: Takashi Iwai <tiwai@suse.de>
Date: Sat Aug 11 08:56:42 2012 +0200
drm/i915: Fix blank panel at reopening lid
changed the register write sequence for restoring the backlight, which
helped prevent non-working backlights on some machines. Turns out that
the original sequence was the right thing to do for a different set of
machines. Worse, setting the backlight level _after_ enabling it seems
to reset it somehow. So we need to make that one conditional upon the
backlight having been reset to zero, and add the old one back.
Cargo-culting at it's best, but it seems to work.
Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47941
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
i915 driver needs to do modeset when
1. system resumes from sleep
2. lid is opened
In PM_SUSPEND_MEM state, all the GPEs are cleared when system resumes,
thus it is the i915_resume code does the modeset rather than intel_lid_notify().
But in PM_SUSPEND_FREEZE state, this will be broken because
system is still responsive to the lid events.
1. When we close the lid in Freeze state, intel_lid_notify() sets modeset_on_lid.
2. When we reopen the lid, intel_lid_notify() will do a modeset,
before the system is resumed.
here is the error log,
[92146.548074] WARNING: at drivers/gpu/drm/i915/intel_display.c:1028 intel_wait_for_pipe_off+0x184/0x190 [i915]()
[92146.548076] Hardware name: VGN-Z540N
[92146.548078] pipe_off wait timed out
[92146.548167] Modules linked in: hid_generic usbhid hid snd_hda_codec_realtek snd_hda_intel snd_hda_codec parport_pc snd_hwdep ppdev snd_pcm_oss i915 snd_mixer_oss snd_pcm arc4 iwldvm snd_seq_dummy mac80211 snd_seq_oss snd_seq_midi fbcon tileblit font bitblit softcursor drm_kms_helper snd_rawmidi snd_seq_midi_event coretemp drm snd_seq kvm btusb bluetooth snd_timer iwlwifi pcmcia tpm_infineon i2c_algo_bit joydev snd_seq_device intel_agp cfg80211 snd intel_gtt yenta_socket pcmcia_rsrc sony_laptop agpgart microcode psmouse tpm_tis serio_raw mxm_wmi soundcore snd_page_alloc tpm acpi_cpufreq lpc_ich pcmcia_core tpm_bios mperf processor lp parport firewire_ohci firewire_core crc_itu_t sdhci_pci sdhci thermal e1000e
[92146.548173] Pid: 4304, comm: kworker/0:0 Tainted: G W 3.8.0-rc3-s0i3-v3-test+ #9
[92146.548175] Call Trace:
[92146.548189] [<c10378e2>] warn_slowpath_common+0x72/0xa0
[92146.548227] [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548263] [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548270] [<c10379b3>] warn_slowpath_fmt+0x33/0x40
[92146.548307] [<f86398b4>] intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548344] [<f86399c2>] intel_disable_pipe+0x102/0x190 [i915]
[92146.548380] [<f8639ea4>] ? intel_disable_plane+0x64/0x80 [i915]
[92146.548417] [<f8639f7c>] i9xx_crtc_disable+0xbc/0x150 [i915]
[92146.548456] [<f863ebee>] intel_crtc_update_dpms+0x5e/0x90 [i915]
[92146.548493] [<f86437cf>] intel_modeset_setup_hw_state+0x42f/0x8f0 [i915]
[92146.548535] [<f8645b0b>] intel_lid_notify+0x9b/0xc0 [i915]
[92146.548543] [<c15610d3>] notifier_call_chain+0x43/0x60
[92146.548550] [<c105d1e1>] __blocking_notifier_call_chain+0x41/0x80
[92146.548556] [<c105d23f>] blocking_notifier_call_chain+0x1f/0x30
[92146.548563] [<c131a684>] acpi_lid_send_state+0x78/0xa4
[92146.548569] [<c131aa9e>] acpi_button_notify+0x3b/0xf1
[92146.548577] [<c12df56a>] ? acpi_os_execute+0x17/0x19
[92146.548582] [<c12e591a>] ? acpi_ec_sync_query+0xa5/0xbc
[92146.548589] [<c12e2b82>] acpi_device_notify+0x16/0x18
[92146.548595] [<c12f4904>] acpi_ev_notify_dispatch+0x38/0x4f
[92146.548600] [<c12df0e8>] acpi_os_execute_deferred+0x20/0x2b
[92146.548607] [<c1051208>] process_one_work+0x128/0x3f0
[92146.548613] [<c1564f73>] ? common_interrupt+0x33/0x38
[92146.548618] [<c104f8c0>] ? wake_up_worker+0x30/0x30
[92146.548624] [<c12df0c8>] ? acpi_os_wait_events_complete+0x1e/0x1e
[92146.548629] [<c10524f9>] worker_thread+0x119/0x3b0
[92146.548634] [<c10523e0>] ? manage_workers+0x240/0x240
[92146.548640] [<c1056e84>] kthread+0x94/0xa0
[92146.548647] [<c1060000>] ? ftrace_raw_output_sched_stat_runtime+0x70/0xf0
[92146.548652] [<c15649b7>] ret_from_kernel_thread+0x1b/0x28
[92146.548658] [<c1056df0>] ? kthread_create_on_node+0xc0/0xc0
three different modeset flags are introduced in this patch
MODESET_ON_LID_OPEN: do modeset on next lid open event
MODESET_DONE: modeset already done
MODESET_SUSPENDED: suspended, only do modeset when system is resumed
In this way,
1. when lid is closed, MODESET_ON_LID_OPEN is set so that
we'll do modeset on next lid open event.
2. when lid is opened, MODESET_DONE is set
so that duplicate lid open events will be ignored.
3. when system suspends, MODESET_SUSPENDED is set.
In this case, we will not do modeset on any lid events.
Plus, locking mechanism is also introduced to avoid racing.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The RC6 VIDS has a linear ramp starting at 250mv, which means any values
below 250 are invalid. The old buggy macros tried to adjust for this to
be more flexible, but there is no need. As Dan pointed out the ENCODE
only ever has one value. The only invalid value for decode is an input
of 0 which means something is really wonky, and the cases where DECODE
are used either don't matter (debug values), or would be implicitly
correct (the check for less than 450).
This patch makes simpler, easier to read macros which are actually
correct. Maybe this patch can actually fix some bugs now.
Thanks to Dan for catching this. /me hides
Cc: stable@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This reverts commit 6f33814bd4.
The quirk cause a regression, and it looks like the original bug was
simply a lack of FIFO bandwidth on the i915G of the reporter. Which
should eventually be fixed as soon as we get around to implemented
DSPARB FIFO reassignment on gen 3.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52281
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
TTM reservations changes, preparing for new reservation mutex system.
* 'for-airlied' of git://people.freedesktop.org/~mlankhorst/linux:
drm/ttm: unexport ttm_bo_wait_unreserved
drm/nouveau: use ttm_bo_reserve_slowpath in validate_init, v2
drm/ttm: use ttm_bo_reserve_slowpath_nolru in ttm_eu_reserve_buffers, v2
drm/ttm: add ttm_bo_reserve_slowpath
drm/ttm: cleanup ttm_eu_reserve_buffers handling
drm/ttm: remove lru_lock around ttm_bo_reserve
drm/nouveau: increase reservation sequence every retry
drm/vmwgfx: always use ttm_bo_is_reserved
It is a bit more precise to compute the total number of pixels first and
then divide, rather than multiplying the line pixel count by the
already-rounded line duration.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Use PCI Express Capability access functions to simplify this code a bit.
For non-PCIe devices or pre-PCIe 3.0 devices that don't implement the Link
Capabilities 2 register, pcie_capability_read_dword() reads a zero.
Since we're only testing whether the bits we care about are set, there's no
need to mask out the other bits we *don't* care about.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
For devices that conform to PCIe r3.0 and have a Link Capabilities 2
register, we test and report every bit in the Supported Link Speeds Vector
field. For a device that supports both 2.5GT/s and 5.0GT/s, we set both
DRM_PCIE_SPEED_25 and DRM_PCIE_SPEED_50 in the returned mask.
For pre-r3.0 devices, the Link Capabilities 0010b encoding
(PCI_EXP_LNKCAP_SLS_5_0GB) means that both 5.0GT/s and 2.5GT/s are
supported, so set both DRM_PCIE_SPEED_25 and DRM_PCIE_SPEED_50 in this
case as well.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Use the standard #defines rather than bare numbers for the PCIe Link
Capabilities speed bits.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Drivers that register interrupt handlers without the DRM core helpers
don't initialize the .irq_enabled field and drm_dev_to_irq() may fail
when called on them. This shouldn't preclude them from implementing
the vblank IOCTL.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Simplify the Radeon prime implementation by using the default behavior provided
by drm_gem_prime_import and drm_gem_prime_export.
v2:
- Rename functions to radeon_gem_prime_get_sg_table and
radeon_gem_prime_import_sg_table.
- Delete the now-unused vmapping_count variable.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Simplify the Nouveau prime implementation by using the default behavior provided
by drm_gem_prime_import and drm_gem_prime_export.
v2: Rename functions to nouveau_gem_prime_get_sg_table and
nouveau_gem_prime_import_sg_table.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Instead of reimplementing all of the dma_buf functionality in every driver,
create helpers drm_prime_import and drm_prime_export that implement them in
terms of new, lower-level hook functions:
gem_prime_pin: callback when a buffer is created, used to pin buffers into GTT
gem_prime_get_sg_table: convert a drm_gem_object to an sg_table for export
gem_prime_import_sg_table: convert an sg_table into a drm_gem_object
gem_prime_vmap, gem_prime_vunmap: map and unmap an object
These hooks are optional; drivers can opt in by using drm_gem_prime_import and
drm_gem_prime_export as the .gem_prime_import and .gem_prime_export fields of
struct drm_driver.
v2:
- Drop .begin_cpu_access. None of the drivers this code replaces implemented
it. Having it here was a leftover from when I was trying to include i915 in
this rework.
- Use mutex_lock instead of mutex_lock_interruptible, as these three drivers
did. This patch series shouldn't change that behavior.
- Rename helpers to gem_prime_get_sg_table and gem_prime_import_sg_table.
Rename struct sg_table* variables to 'sgt' for clarity.
- Update drm.tmpl for these new hooks.
v3:
- Pass the vaddr down to the driver. This lets drivers that just call vunmap on
the pointer avoid having to store the pointer in their GEM private structures.
- Move documentation into a /** DOC */ comment in drm_prime.c and include it in
drm.tmpl with a !P line. I tried to use !F lines to include documentation of
the individual functions from drmP.h, but the docproc / kernel-doc scripts
barf on that file, so hopefully this is good enough for now.
- apply refcount fix from commit be8a42ae60
("drm/prime: drop reference on imported dma-buf come from gem")
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Move this out of nouveau directory. As we start to add more encoder
slaves used by other drivers, it makes sense to put the Kconfig bits in
one place.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex writes:
- CS ioctl cleanup and unification. Unification of a lot of functionality
that was duplicated across multiple generates of hardware.
- Add support for Oland GPUs
- Deprecate UMS support. Mesa and the ddx dropped support for UMS and
apparently very few people still use it since the UMS CS ioctl was broken
for several kernels and no one reported it. It was fixed in 3.8/stable.
- Rework GPU reset. Use the status registers to determine what blocks
to reset. This better matches the recommended reset programming model.
This also allows us to properly reset blocks besides GFX and DMA.
- Switch the VM set page code to use an IB rather than the ring. This
fixes overflow issues when doing large page table updates using a small
ring like DMA.
- Several small cleanups and bug fixes.
* 'drm-next-3.9' of git://people.freedesktop.org/~agd5f/linux: (38 commits)
drm/radeon/dce6: fix display powergating
drm/radeon: add Oland pci ids
drm/radeon: radeon-asic updates for Oland
drm/radeon: add ucode loading support for Oland
drm/radeon: fill in gpu init for Oland
drm/radeon: add Oland chip family
drm/radeon: switch back to using the DMA ring for VM PT updates
drm/radeon: use IBs for VM page table updates v2
drm/radeon: don't reset the MC on IGPs/APUs
drm/radeon: use the reset mask to determine if rings are hung
drm/radeon: halt engines before disabling MC (si)
drm/radeon: halt engines before disabling MC (cayman/TN)
drm/radeon: halt engines before disabling MC (evergreen)
drm/radeon: halt engines before disabling MC (6xx/7xx)
drm/radeon: use status regs to determine what to reset (si)
drm/radeon: use status regs to determine what to reset (cayman)
drm/radeon: use status regs to determine what to reset (evergreen)
drm/radeon: use status regs to determine what to reset (6xx/7xx)
drm/radeon: rework GPU reset on cayman/TN
drm/radeon: rework GPU reset on cayman/TN
...
videomode helpers for of + devicetree stuff, required for new kms drivers
(not the fbdev maintainer).
* tag 'of_videomode_helper' of git://git.pengutronix.de/git/str/linux:
drm_modes: add of_videomode helpers
drm_modes: add videomode helpers
fbmon: add of_videomode helpers
fbmon: add videomode helpers
video: add of helper for display timings/videomode
video: add display_timing and videomode
viafb: rename display_timing to via_display_timing
Fixes for usb/udl devices
* udl-fixes:
drm/udl: disable fb_defio by default
drm/udl: Inline memcmp() for RLE compression of xfer
drm/udl: make usage as a console safer
drm/usb: bind driver to correct device
This pulls in most of Linus tree up to -rc6, this fixes the worst lockdep
reported issues and re-enables fbcon lockdep.
(not the fbcon maintainer)
* 'fbcon-locking-fixes' of ssh://people.freedesktop.org/~airlied/linux: (529 commits)
Revert "Revert "console: implement lockdep support for console_lock""
fbcon: fix locking harder
fb: Yet another band-aid for fixing lockdep mess
fb: rework locking to fix lock ordering on takeover
Okay so Alan's patch handled the case where there was no registered fbcon,
however the other path entered in set_con2fb_map pit.
In there we called fbcon_takeover, but we also took the console lock in a couple
of places. So push the console lock out to the callers of set_con2fb_map,
this means fbmem and switcheroo needed to take the lock around the fb notifier
entry points that lead to this.
This should fix the efifb regression seen by Maarten.
Tested-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There seems to be a bad interaction between gem/shmem and defio on top,
I get list corruption on the page lru in the shmem code.
Turn it off for now until we get some more digging done.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
As we use a variable length the compiler does not realise that it is a
fixed value of either 2 or 4 bytes. Instead of performing the inline
comparison itself, the compiler inserts a function call to the generic
memcmp routine which is optimised for long comparisons of variable
length. That turns out to be quite expensive...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel writes:
"Probably the last feature pull for 3.9, there's some fixes outstanding
thought that I'd like to sneak in. And maybe 3.8 takes a bit longer ...
Anyway, highlights of this pull:
- Kill the horrible IS_DISPLAYREG hack to handle the mmio offset movements
on vlv, big thanks to Ville.
- Dynamic power well support for Haswell, shaves away a bit when only
using the eDP port on pipe A (Paulo). Plus unclaimed register fixes
uncovered by this.
- Clarifications of the gpu hang/reset state transitions, hopefully fixing
a few spurious -EIO deaths in userspace.
- Haswell ELD fixes.
- Some more (pp)gtt cleanups from Ben.
- A few smaller things all over.
Plus all the stuff from the previous rather small pull request:
- Broadcast RBG improvements and reduced color range fixes from Ville.
- Ben is on a "kill legacy gtt code for good" spree, first pile of patches
included.
- No-relocs and bo lut improvements for faster execbuf from Chris.
- Some refactorings from Imre."
* tag 'drm-intel-next-2013-02-01' of git://people.freedesktop.org/~danvet/drm-intel: (101 commits)
GPU/i915: Fix acpi_bus_get_device() check in drivers/gpu/drm/i915/intel_opregion.c
drm/i915: Set the SR01 "screen off" bit in i915_redisable_vga() too
drm/i915: Kill IS_DISPLAYREG()
drm/i915: Introduce i915_vgacntrl_reg()
drm/i915: gen6_gmch_remove can be static
drm/i915: dynamic Haswell display power well support
drm/i915: check the power down well on assert_pipe()
drm/i915: don't send DP "idle" pattern before "normal" on HSW PORT_A
drm/i915: don't run hsw power well code on !hsw
drm/i915: kill cargo-culted locking from power well code
drm/i915: Only run idle processing from i915_gem_retire_requests_worker
drm/i915: Fix CAGF for HSW
drm/i915: Reclaim GTT space for failed PPGTT
drm/i915: remove intel_gtt structure
drm/i915: Add probe and remove to the gtt ops
drm/i915: extract hw ppgtt setup/cleanup code
drm/i915: pte_encode is gen6+
drm/i915: vfuncs for ppgtt
drm/i915: vfuncs for gtt_clear_range/insert_entries
drm/i915: Error state should print /sys/kernel/debug
...
Okay you don't really want to use udl devices as your console, but if
you are unlucky enough to do so, you run into a lot of schedule while atomic
due to printk being called from all sorts of funky places. So check if we
are in an atomic context, and queue the damage for later, the next printk
should cause it to appear. This isn't ideal, but it is simple, and seems to
work okay in my testing here.
(dirty area idea came from xenfb)
fixes a bunch of sleeping while atomic issues running fbcon on udl devices.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
While looking at plymouth on udl I noticed that plymouth was trying
to use its fb plugin not its drm one, it was trying to drmOpen a driver called
usb not udl, noticed that we actually had out driver pointing at the wrong
device.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Only enable it when we disable the display rather than
at DPMS time since enabling it requires a full modeset
to restore the display state. Fixes blank screens in
certain cases.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Pull radeon fixes from Dave Airlie:
"I got these late last week, the main chunks of these fix a rendering
regression since 3.7, and the settle ones all fix the issue where we
don't wait long enough for the memory controller to settle after
turning it off which causes bad memory reads, they all fix real users
bugs, and most of them are destined for stable.
Can't remember if you had net connection on that island :-)"
I don't know if the "two tin-cans and a string" thing here on "that
island" can really be considered internet, but I guess I can pull
things. Barely.
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: switch back to the CP ring for VM PT updates
drm/radeon: prevent crash in the ring space allocation
drm/radeon: Calling object_unrefer() when creating fb failure
drm/radeon/r5xx-r7xx: wait for the MC to settle after MC blackout
drm/radeon/evergreen+: wait for the MC to settle after MC blackout
drm/radeon: protect against div by 0 in backend setup
drm/radeon: fix backend map setup on 1 RB sumo boards
drm/radeon: add quirk for RV100 board
drm/radeon: add WAIT_UNTIL to the non-VM safe regs list for cayman/TN
drm/radeon: fix MC blackout on evergreen+
Now that we have switched to using IBs for page table updates,
we can switch back the using the DMA ring.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For very large page table updates, we can exceed the
size of the ring. To avoid this, use an IB to perform
the page table update.
v2(ck): cleanup the IB infrastructure and the use it instead
of filling the struct ourself.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
acpi_bus_get_device() returns int not acpi_status.
The patch change not to apply ACPI_FAILURE() to the return value of
acpi_bus_get_device().
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
fetch the reset mask and check if the relevant ring flags
are set to determine whether the ring is hung or not.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
