The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed as of v6.8-rc1, so it became a dead flag since the commit
16a1d96835 ("mm/slab: remove mm/slab.c and slab_def.h"). And the
series[1] went on to mark it obsolete to avoid confusion for users.
Here we can just remove all its users, which has no functional change.
[1] https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With help of neovim, LSP and clangd we can identify header files that
are not actually needed to be included in the .c files. This is focused
only on removal (with minor fixups), further cleanups are possible but
will require doing the header files properly with forward declarations,
minimized includes and include-what-you-use care.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
fstests looks for WARN_ON's in dmesg. Add WARN_ON_ONCE() to our leak
detection code (enabled only in debug builds) so that fstests will fail
if these things trip at all. This will allow us to easily catch
problems with our reference counting that may otherwise go unnoticed.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The file_extent_tree was added in 41a2ee75aa ("btrfs: introduce
per-inode file extent tree") so we have an explicit mapping of the file
extents to know where it is safe to update i_size. When the feature
NO_HOLES is enabled, and it's been a mkfs default since 5.15, the tree
is not necessary.
To save some space in the inode, allocate the tree only when necessary.
This reduces size by 16 bytes from 1096 to 1080 on a x86_64 release
config.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extent_io_tree is embedded in several structures, notably in struct
btrfs_inode. The fs_info is only used for reporting errors and for
reference in trace points. We can get to the pointer through the inode,
but not all io trees set it. However, we always know the owner and
can recognize if inode is valid. For access helpers are provided, const
variant for the trace points.
This reduces size of extent_io_tree by 8 bytes and following structures
in turn:
- btrfs_inode 1104 -> 1088
- btrfs_device 520 -> 512
- btrfs_root 1360 -> 1344
- btrfs_transaction 456 -> 440
- btrfs_fs_info 3600 -> 3592
- reloc_control 1520 -> 1512
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass the type of the extent io tree operation which failed in the report
helper. The message wording and contents is updated, though locking
might be the cause of the error it's probably not the only one and we're
interested in the state.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper insert_state errors are handled in all callers and reported
by extent_io_tree_panic so we don't need to do it twice.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The per-inode file extent tree was added in 41a2ee75aa ("btrfs:
introduce per-inode file extent tree"), it's the only tree type
that requires the lockdep class. Move it to the file where it is
actually used.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The declaration was temporarily moved in a4055213bf ("btrfs: unexport
all the temporary exports for extent-io-tree.c") and then should have
been removed in 6.0 in 071d19f513 ("btrfs: remove struct tree_entry in
extent-io-tree.c") but was not. This was found by tool
https://github.com/jirislaby/clang-struct .
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, at find_first_extent_bit(), when we are given a cached extent
state that happens to have its end offset match the desired range start,
we find the next extent state using that cached state, with next_state()
calls, and then return it.
We then try to cache that next state by calling cache_state_if_flags(),
but that will not cache the state because we haven't reset *cached_state
to NULL, so we end up with the cached_state unchanged, and if the caller
is iterating over extent states in the io tree, its next call to
find_first_extent_bit() will not use the current cached state as its end
offset does not match the minimum start range offset, therefore the cached
state is reset and we have to search the rbtree to find the next suitable
extent state record.
So fix this by resetting the cached state to NULL (and dropping our ref
on it) when we have a suitable cached state and we found a next state by
using next_state() starting from the cached state. This makes use cases
of calling find_first_extent_bit() to go over all ranges in the io tree
to do a single rbtree full search, only on the first call, and the next
calls will just do next_state() (rb_next() wrapper) calls, which is more
efficient.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently extent_io_tree_release() is a loop that keeps getting the first
node in the io tree, using rb_first() which is a loop that gets to the
leftmost node of the rbtree, and then for each node it calls rb_erase(),
which often requires rebalancing the rbtree.
We can make this more efficient by using
rbtree_postorder_for_each_entry_safe() to free each node without having
to delete it from the rbtree and without looping to get the first node.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The wait_on_state() function is very short and has a single caller, which
is wait_extent_bit(), so remove the function and put its code into the
caller.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The memory barrier at extent_io_tree_release() is redundant. Holding
spin_lock here is not enough to drop the barrier completely. We only
change the waitqueue of an extent state record while holding the tree
lock - see wait_on_state().
The update to waitqueue state will not become stale because there will
be an spin_unlock/spin_lock sequence between the change and waiting,
this implies a full memory barrier.
So remove the explicit smp_mb() barrier.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ reword reasoning ]
Signed-off-by: David Sterba <dsterba@suse.com>
The function wait_extent_bit() is not used outside extent-io-tree.c so
make it static. Furthermore the function doesn't have the 'btrfs_' prefix.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's this comment at extent_io_tree_release() that mentions io btrees,
but this function is no longer used only for io btrees. Originally it was
added as a static function named clear_btree_io_tree() at transaction.c,
in commit 663dfbb077 ("Btrfs: deal with convert_extent_bit errors to
avoid fs corruption"), as it was used only for cleaning one of the io
trees that track dirty extent buffers, the dirty_log_pages io tree of a
a root and the dirty_pages io tree of a transaction. Later it was renamed
and exported and now it's used to cleanup other io trees such as the
allocation state io tree of a device or the csums range io tree of a log
root.
So remove that comment and replace it with one at the top of the function
that is more complete, mentioning what the function does and that it's
expected to be called only when a task is sure no one else will need to
use the tree anymore, as well as there should be no locked ranges in the
tree and therefore no waiters on its extent state records. Also add an
assertion to check that there are no locked extent state records in the
tree.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When inserting a new extent state record into an io tree that happens to
be mergeable, we currently do the following:
1) Insert the extent state record in the io tree's rbtree. This requires
going down the tree to find where to insert it, and during the
insertion we often need to balance the rbtree;
2) We then check if the previous node is mergeable, so we call rb_prev()
to find it, which requires some looping to find the previous node;
3) If the previous node is mergeable, we adjust our node to include the
range of the previous node and then delete the previous node from the
rbtree, which again may need to balance the rbtree;
4) Then we check if the next node is mergeable with the node we inserted,
so we call rb_next(), which requires some looping too. If the next node
is indeed mergeable, we expand the range of our node to include the
next node's range and then delete the next node from the rbtree, which
again may need to balance the tree.
So these are quite of lot of iterations and looping over the rbtree, and
some of the operations may need to rebalance the rb tree. This can be made
a bit more efficient by:
1) When iterating the rbtree, once we find a node that is mergeable with
the node we want to insert, we can just adjust that node's range with
the range of the node to insert - this avoids continuing iterating
over the tree and deleting a node from the rbtree;
2) If we expand the range of a mergeable node, then we find the next or
the previous node, depending on other we merged a range to the right or
to the left of the node we are currently at during the iteration. This
merging is as before, we find the next or previous node with rb_next()
or rb_prev() and if that other node is mergeable with the current one,
we adjust the range of the current node and remove the other node from
the rbtree;
3) Whenever we need to insert the new extent state record it's because
we don't have any extent state record in the rbtree which can be
merged, so we can remove the call to merge_state() after the insertion,
saving rb_next() and rb_prev() calls, which require some looping.
So update the insertion function insert_state() to have this behaviour.
Running dbench for 120 seconds and capturing the execution times of
set_extent_bit() at pin_down_extent(), resulted in the following data
(time values are in nanoseconds):
Before this change:
Count: 2278299
Range: 0.000 - 4003728.000; Mean: 713.436; Median: 612.000; Stddev: 3606.952
Percentiles: 90th: 1187.000; 95th: 1350.000; 99th: 1724.000
0.000 - 7.534: 5 |
7.534 - 35.418: 36 |
35.418 - 154.403: 273 |
154.403 - 662.138: 1244016 #####################################################
662.138 - 2828.745: 1031335 ############################################
2828.745 - 12074.102: 1395 |
12074.102 - 51525.930: 806 |
51525.930 - 219874.955: 162 |
219874.955 - 938254.688: 22 |
938254.688 - 4003728.000: 3 |
After this change:
Count: 2275862
Range: 0.000 - 1605175.000; Mean: 678.903; Median: 590.000; Stddev: 2149.785
Percentiles: 90th: 1105.000; 95th: 1245.000; 99th: 1590.000
0.000 - 10.219: 10 |
10.219 - 40.957: 36 |
40.957 - 155.907: 262 |
155.907 - 585.789: 1127214 ####################################################
585.789 - 2193.431: 1145134 #####################################################
2193.431 - 8205.578: 1648 |
8205.578 - 30689.378: 1039 |
30689.378 - 114772.699: 362 |
114772.699 - 429221.537: 52 |
429221.537 - 1605175.000: 10 |
Maximum duration (range), average duration, percentiles and standard
deviation are all better.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The semantics of test_range_bit() with filled == 0 is now in it's own
helper so test_range_bit will check the whole range unconditionally.
The detection logic is flipped and assumes success by default and
catches exceptions.
Signed-off-by: David Sterba <dsterba@suse.com>
The existing helper test_range_bit works in two ways, checks if the whole
range contains all the bits, or stop on the first occurrence. By adding
a specific helper for the latter case, the inner loop can be simplified
and contains fewer conditionals, making it a bit faster.
There's no caller that uses the cached state pointer so this reduces the
argument count further.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently find_first_extent_bit() returns a 0 if it found a range in the
given io tree and 1 if it didn't find any. There's no need to return any
errors, so make the return value a boolean and invert the logic to make
more sense: return true if it found a range and false if it didn't find
any range.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that all extent state bit helpers effectively take the GFP_NOFS mask
(and GFP_NOWAIT is encoded in the bits) we can remove the parameter.
This reduces stack consumption in many functions and simplifies a lot of
code.
Net effect on module on a release build:
text data bss dec hex filename
1250432 20985 16088 1287505 13a551 pre/btrfs.ko
1247074 20985 16088 1284147 139833 post/btrfs.ko
DELTA: -3358
Signed-off-by: David Sterba <dsterba@suse.com>
The only flags we now pass to set_extent_bit/__clear_extent_bit are
GFP_NOFS and GFP_NOWAIT (a few functions handling mappings). This
requires an extra parameter to be passed everywhere but is almost always
the same.
Encode the GFP_NOWAIT as an artificial extent bit and extract the
real bits and gfp mask in the lowest level helpers. Now the passed
gfp mask is not actually used and can be removed.
Signed-off-by: David Sterba <dsterba@suse.com>
There quite a few spelling mistakes as found using codespell. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We will pass in the parent and p pointer into our tree_search function
to avoid doing a second search when inserting a new extent state into
the tree. However because this is conditional upon passing in these
pointers the compiler seems to think these values can be uninitialized
if we're using -Wmaybe-uninitialized. Fix this by initializing these
values.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During lseek, when searching for delalloc in a range that represents a
hole and that range has a length of 1 byte, we end up not doing the actual
delalloc search in the inode's io tree, resulting in not correctly
reporting the offset with data or a hole. This actually only happens when
the start offset is 0 because with any other start offset we round it down
by sector size.
Reproducer:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ xfs_io -f -c "pwrite -q 0 1" /mnt/sdc/foo
$ xfs_io -c "seek -d 0" /mnt/sdc/foo
Whence Result
DATA EOF
It should have reported an offset of 0 instead of EOF.
Fix this by updating btrfs_find_delalloc_in_range() and count_range_bits()
to deal with inclusive ranges properly. These functions are already
supposed to work with inclusive end offsets, they just got it wrong in a
couple places due to off-by-one mistakes.
A test case for fstests will be added later.
Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/20221223020509.457113-1-joanbrugueram@gmail.com/
Fixes: b6e833567e ("btrfs: make hole and data seeking a lot more efficient")
CC: stable@vger.kernel.org # 6.1
Tested-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This was caught when syncing extent-io-tree.c into btrfs-progs. This
however isn't really a problem, the only way next would be uninitialized
is if we found the range we were looking for, and in this case we don't
care about next. However it's a compile error, so fix it up.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I don't know how this isn't caught when we build this in the kernel, but
while syncing extent-io-tree.c into btrfs-progs I got an error because
parent could potentially be uninitialized when we link in a new node,
specifically when the extent_io_tree is empty. This means we could have
garbage in the parent color. I don't know what the ramifications are of
that, but it's probably not great, so fix this by initializing parent to
NULL. I spot checked all of our other usages in btrfs and we appear to
be doing the correct thing everywhere else.
Fixes: c7e118cf98 ("btrfs: open code rbtree search in insert_state")
CC: stable@vger.kernel.org # 6.0+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The comment for count_range_bits() mentions that the search is fast if we
are asking for a range with the EXTENT_DIRTY bit set. However that is no
longer true since we don't use that bit and the optimization for that was
removed in:
commit 71528e9e16 ("btrfs: get rid of extent_io_tree::dirty_bytes")
So remove that part of the comment mentioning the no longer existing
optimized case, and, while at it, add proper documentation describing the
purpose, arguments and return value of the function.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
An inode's io_tree can be quite large and there are cases where due to
delalloc it can have thousands of extent state records, which makes the
red black tree have a depth of 10 or more, making the operation of
count_range_bits() slow if we repeatedly call it for a range that starts
where, or after, the previous one we called it for. Such use cases are
when searching for delalloc in a file range that corresponds to a hole or
a prealloc extent, which is done during lseek SEEK_HOLE/DATA and fiemap.
So introduce a cached state parameter to count_range_bits() which we use
to store the last extent state record we visited, and then allow the
caller to pass it again on its next call to count_range_bits(). The next
patches in the series will make fiemap and lseek use the new parameter.
This change is part of a patchset that has the goal to make performance
better for applications that use lseek's SEEK_HOLE and SEEK_DATA modes to
iterate over the extents of a file. Two examples are the cp program from
coreutils 9.0+ and the tar program (when using its --sparse / -S option).
A sample test and results are listed in the changelog of the last patch
in the series:
1/9 btrfs: remove leftover setting of EXTENT_UPTODATE state in an inode's io_tree
2/9 btrfs: add an early exit when searching for delalloc range for lseek/fiemap
3/9 btrfs: skip unnecessary delalloc searches during lseek/fiemap
4/9 btrfs: search for delalloc more efficiently during lseek/fiemap
5/9 btrfs: remove no longer used btrfs_next_extent_map()
6/9 btrfs: allow passing a cached state record to count_range_bits()
7/9 btrfs: update stale comment for count_range_bits()
8/9 btrfs: use cached state when looking for delalloc ranges with fiemap
9/9 btrfs: use cached state when looking for delalloc ranges with lseek
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Link: https://lore.kernel.org/linux-btrfs/20221106073028.71F9.409509F4@e16-tech.com/
Link: https://lore.kernel.org/linux-btrfs/CAL3q7H5NSVicm7nYBJ7x8fFkDpno8z3PYt5aPU43Bajc1H0h1Q@mail.gmail.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function is for internal interfaces so we should use the
btrfs_inode.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function is for internal interfaces so we should use the
btrfs_inode.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function is for internal interfaces so we should use the
btrfs_inode.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function is for internal interfaces so we should use the
btrfs_inode.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extent_io_tree::private_data was meant to be a preparatory work for
the metadata inode rework but that never materialized. Now it's used
only for an inode so it's better to change the appropriate type and
rename it.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers except one pass NULL, so the parameter can be dropped and
the inode::io_tree initialization can be open coded.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a bunch of printk helpers that are in ctree.h. These have
nothing to do with ctree.c, so move them into their own header.
Subsequent patches will cleanup the printk helpers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We sometimes have to allocate new extent states when clearing or setting
new bits in an extent io tree. Generally we preallocate this before
taking the tree spin lock, but we can use this preallocated extent state
sometimes and then need to try to do a GFP_ATOMIC allocation under the
lock.
Unfortunately sometimes this fails, and then we hit the BUG_ON() and
bring the box down. This happens roughly 20 times a week in our fleet.
However the vast majority of callers use GFP_NOFS, which means that if
this GFP_ATOMIC allocation fails, we could simply drop the spin lock, go
back and allocate a new extent state with our given gfp mask, and begin
again from where we left off.
For the remaining callers that do not use GFP_NOFS, they are generally
using GFP_NOWAIT, which still allows for some reclaim. So allow these
allocations to attempt to happen outside of the spin lock so we don't
need to rely on GFP_ATOMIC allocations.
This in essence creates an infinite loop for anything that isn't
GFP_NOFS. To address this we may want to migrate to using mempools for
extent states so that we will always have emergency reserves in order to
make our allocations.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently if we fail to lock a range we'll return the start of the range
that we failed to lock. We'll then search down to this range and wait
on any extent states in this range.
However we can avoid this search altogether if we simply cache the
extent_state that had the contention. We can pass this into
wait_extent_bit() and start from that extent_state without doing the
search. In the most optimistic case we can avoid all searches, more
likely we'll avoid the initial search and have to perform the search
after we wait on the failed state, or worst case we must search both
times which is what currently happens.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With nowait becoming more pervasive throughout our codebase go ahead and
add a cached_state to try_lock_extent(). This allows us to be faster
about clearing the locked area if we have contention, and then gives us
the same optimization for unlock if we are able to lock the range.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In production we hit the following deadlock
task 1 task 2 task 3
------ ------ ------
fiemap(file) falloc(file) fsync(file)
write(0, 1MiB)
btrfs_commit_transaction()
wait_on(!pending_ordered)
lock(512MiB, 1GiB)
start_transaction
wait_on_transaction
lock(0, 1GiB)
wait_extent_bit(512MiB)
task 4
------
finish_ordered_extent(0, 1MiB)
lock(0, 1MiB)
**DEADLOCK**
This occurs because when task 1 does it's lock, it locks everything from
0-512MiB, and then waits for the 512MiB chunk to unlock. task 2 will
never unlock because it's waiting on the transaction commit to happen,
the transaction commit is waiting for the outstanding ordered extents,
and then the ordered extent thread is blocked waiting on the 0-1MiB
range to unlock.
To fix this we have to clear anything we've locked so far, wait for the
extent_state that we contended on, and then try to re-lock the entire
range again.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're only initializing extent_io_tree's with a private data if we're a
normal inode, so we don't need this extra check.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of taking up a whole argument to indicate we're clearing
everything in a range, simply add another EXTENT bit to control this,
and then update all the callers to drop this argument from the
clear_extent_bit variants.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This was used as an optimization for count_range_bits(EXTENT_DIRTY),
which was used by the failed record code. However this was removed in
this series by patch "btrfs: convert the io_failure_tree to a plain
rb_tree" which was the last user of this optimization. Remove the
->dirty_bytes as nobody cares anymore.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have two variants of lock/unlock extent, one set that takes a cached
state, another that does not. This is slightly annoying, and generally
speaking there are only a few places where we don't have a cached state.
Simplify this by making lock_extent/unlock_extent the only variant and
make it take a cached state, then convert all the callers appropriately.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The only places that set extent_changeset is set_record_extent_bits,
everywhere else sets it to NULL. Drop this argument from
set_extent_bit.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is only used for internal locking related helpers, everybody else
just passes in NULL. I've changed set_extent_bit to __set_extent_bit
and made it static, removed failed_start from set_extent_bit and have it
call __set_extent_bit with a NULL failed_start, and I've moved some code
down below the now static __set_extent_bit.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is only used in the case that we are clearing EXTENT_LOCKED, so
infer this value from the bits passed in instead of taking it as an
argument.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is only ever set if we have EXTENT_LOCKED set, so simply push this
into the function itself and remove the function argument.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use rb_next/rb_prev and then get the entry for the adjacent items in
an extent io tree. We have helpers for this, so convert merge_state to
use next_state/prev_state and simplify the code.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of doing the rb_entry again once we return from this function,
simply return the actual states themselves, and then clean up the only
user of this helper to handle states instead of nodes.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use this to search for an extent state, or return the nodes we need
to insert a new extent state. This means we have the following pattern
node = tree_search_for_insert();
if (!node) {
/* alloc and insert. */
goto again;
}
state = rb_entry(node, struct extent_state, rb_node);
we don't use the node for anything else. Making
tree_search_for_insert() return the extent_state means we can drop the
rb_node and clean this up by eliminating the rb_entry.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
