renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 07:04:00 +08:00
Code

spi: rspi: Increase bit rate accuracy on RZ/A

Browse Source 
rspi_rz_set_config_register() favors high values of "brdv" over high
values of "spbr".  As "brdv" is not a plain divider, but controls a
power-of-two divider, this may cause the selection of non-optimal
divider values.  E.g. on RSK+RZA1, when 3.8 MHz is requested, the actual
configured bit rate is 2.08 MHz (spbr = 1, brdv = 3), while 3.7 MHz
would be possible (spbr = 8, brdv = 0).

Fix this by only resorting to higher "brdv" values when really needed.
This makes the driver always pick optimal divider values on RZ/A.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200819125904.20938-4-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Geert Uytterhoeven 2020-08-19 14:59:00 +02:00 committed by Mark Brown
parent 8dd7169860
commit feace90233
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
1 changed files with 3 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
drivers/spi/spi-rspi.c
View File

@ -298,15 +298,13 @@ static int rspi_rz_set_config_register(struct rspi_data *rspi, int access_size)
rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
clksrc = clk_get_rate(rspi->clk);
while (brdv < 3) {
if (rspi->speed_hz >= clksrc/4) /* 4=(CLK/2)/2 */
break;
spbr = DIV_ROUND_UP(clksrc, 2 * rspi->speed_hz) - 1;
while (spbr > 255 && brdv < 3) {
brdv++;
clksrc /= 2;
spbr = DIV_ROUND_UP(spbr + 1, 2) - 1;
}
/* Sets transfer bit rate */
spbr = DIV_ROUND_UP(clksrc, 2 * rspi->speed_hz) - 1;
rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
rspi->spcmd |= SPCMD_BRDV(brdv);