2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-18 18:23:53 +08:00

ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm

GPMC controller on AM335x-EVM has a NAND flash connected to it.
This patch updates following in am335x-evm.dts:
- adds nandflash specific pin-mux configs
- adds nand node as child of GPMC contoller, with information about
  NAND flash interface, NAND partition table, ECC scheme, elm handle id.
- updates GPMC node for newer GPMC DT properties added in linux-3.10.

Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Signed-off-by: Gupta, Pekon <pekon@ti.com>
Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
This commit is contained in:
Philip Avinash 2013-05-31 13:19:05 +05:30 committed by Benoit Cousson
parent 15e8246bd6
commit fdc6a2ddd8

View File

@ -71,6 +71,26 @@
0x1b4 0x03 /* xdma_event_intr1.clkout2 OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
>;
};
nandflash_pins_s0: nandflash_pins_s0 {
pinctrl-single,pins = <
0x0 0x30 /* gpmc_ad0.gpmc_ad0, INPUT | PULLUP | MODE0 */
0x4 0x30 /* gpmc_ad1.gpmc_ad1, INPUT | PULLUP | MODE0 */
0x8 0x30 /* gpmc_ad2.gpmc_ad2, INPUT | PULLUP | MODE0 */
0xc 0x30 /* gpmc_ad3.gpmc_ad3, INPUT | PULLUP | MODE0 */
0x10 0x30 /* gpmc_ad4.gpmc_ad4, INPUT | PULLUP | MODE0 */
0x14 0x30 /* gpmc_ad5.gpmc_ad5, INPUT | PULLUP | MODE0 */
0x18 0x30 /* gpmc_ad6.gpmc_ad6, INPUT | PULLUP | MODE0 */
0x1c 0x30 /* gpmc_ad7.gpmc_ad7, INPUT | PULLUP | MODE0 */
0x70 0x30 /* gpmc_wait0.gpmc_wait0, INPUT | PULLUP | MODE0 */
0x74 0x37 /* gpmc_wpn.gpio0_30, INPUT | PULLUP | MODE7 */
0x7c 0x8 /* gpmc_csn0.gpmc_csn0, PULL DISA */
0x90 0x8 /* gpmc_advn_ale.gpmc_advn_ale, PULL DISA */
0x94 0x8 /* gpmc_oen_ren.gpmc_oen_ren, PULL DISA */
0x98 0x8 /* gpmc_wen.gpmc_wen, PULL DISA */
0x9c 0x8 /* gpmc_be0n_cle.gpmc_be0n_cle, PULL DISA */
>;
};
};
ocp {
@ -138,6 +158,91 @@
reg = <0x48>;
};
};
elm: elm@48080000 {
status = "okay";
};
gpmc: gpmc@50000000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nandflash_pins_s0>;
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
nand@0,0 {
reg = <0 0 0>; /* CS0, offset 0 */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
gpmc,device-nand = "true";
gpmc,device-width = <1>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
gpmc,cs-wr-off-ns = <44>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <34>;
gpmc,adv-wr-off-ns = <44>;
gpmc,we-on-ns = <0>;
gpmc,we-off-ns = <40>;
gpmc,oe-on-ns = <0>;
gpmc,oe-off-ns = <54>;
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,wait-on-read = "true";
gpmc,wait-on-write = "true";
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
#address-cells = <1>;
#size-cells = <1>;
elm_id = <&elm>;
/* MTD partition table */
partition@0 {
label = "SPL1";
reg = <0x00000000 0x000020000>;
};
partition@1 {
label = "SPL2";
reg = <0x00020000 0x00020000>;
};
partition@2 {
label = "SPL3";
reg = <0x00040000 0x00020000>;
};
partition@3 {
label = "SPL4";
reg = <0x00060000 0x00020000>;
};
partition@4 {
label = "U-boot";
reg = <0x00080000 0x001e0000>;
};
partition@5 {
label = "environment";
reg = <0x00260000 0x00020000>;
};
partition@6 {
label = "Kernel";
reg = <0x00280000 0x00500000>;
};
partition@7 {
label = "File-System";
reg = <0x00780000 0x0F880000>;
};
};
};
};
vbat: fixedregulator@0 {