diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index c2340eeeb97f..3d84dcae8475 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -11,6 +11,7 @@ Required properties: - compatible : compatible string, one of: - "allwinner,sun4i-a10-ahci" - "hisilicon,hisi-ahci" + - "cavium,octeon-7130-ahci" - "ibm,476gtr-ahci" - "marvell,armada-380-ahci" - "snps,dwc-ahci" diff --git a/Documentation/devicetree/bindings/mips/cavium/sata-uctl.txt b/Documentation/devicetree/bindings/mips/cavium/sata-uctl.txt new file mode 100644 index 000000000000..3bd3c2f0b9b1 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/cavium/sata-uctl.txt @@ -0,0 +1,42 @@ +* UCTL SATA controller glue + +UCTL is the bridge unit between the I/O interconnect (an internal bus) +and the SATA AHCI host controller (UAHC). It performs the following functions: + - provides interfaces for the applications to access the UAHC AHCI + registers on the CN71XX I/O space. + - provides a bridge for UAHC to fetch AHCI command table entries and data + buffers from Level 2 Cache. + - posts interrupts to the CIU. + - contains registers that: + - control the behavior of the UAHC + - control the clock/reset generation to UAHC + - control endian swapping for all UAHC registers and DMA accesses + +Properties: + +- compatible: "cavium,octeon-7130-sata-uctl" + + Compatibility with the cn7130 SOC. + +- reg: The base address of the UCTL register bank. + +- #address-cells, #size-cells, ranges and dma-ranges must be present and hold + suitable values to map all child nodes. + +Example: + + uctl@118006c000000 { + compatible = "cavium,octeon-7130-sata-uctl"; + reg = <0x11800 0x6c000000 0x0 0x100>; + ranges; /* Direct mapping */ + dma-ranges; + #address-cells = <2>; + #size-cells = <2>; + + sata: sata@16c0000000000 { + compatible = "cavium,octeon-7130-ahci"; + reg = <0x16c00 0x00000000 0x0 0x200>; + interrupt-parent = <&cibsata>; + interrupts = <2 4>; /* Bit: 2, level */ + }; + }; diff --git a/arch/mips/include/asm/octeon/cvmx.h b/arch/mips/include/asm/octeon/cvmx.h index 774bb45834cb..19e139c9f337 100644 --- a/arch/mips/include/asm/octeon/cvmx.h +++ b/arch/mips/include/asm/octeon/cvmx.h @@ -275,6 +275,11 @@ static inline void cvmx_write_csr(uint64_t csr_addr, uint64_t val) cvmx_read64(CVMX_MIO_BOOT_BIST_STAT); } +static inline void cvmx_writeq_csr(void __iomem *csr_addr, uint64_t val) +{ + cvmx_write_csr((__force uint64_t)csr_addr, val); +} + static inline void cvmx_write_io(uint64_t io_addr, uint64_t val) { cvmx_write64(io_addr, val); @@ -287,6 +292,10 @@ static inline uint64_t cvmx_read_csr(uint64_t csr_addr) return val; } +static inline uint64_t cvmx_readq_csr(void __iomem *csr_addr) +{ + return cvmx_read_csr((__force uint64_t) csr_addr); +} static inline void cvmx_send_single(uint64_t data) { diff --git a/block/blk-core.c b/block/blk-core.c index 45f4d7efbf34..827f8badd143 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -3529,6 +3529,30 @@ void blk_post_runtime_resume(struct request_queue *q, int err) spin_unlock_irq(q->queue_lock); } EXPORT_SYMBOL(blk_post_runtime_resume); + +/** + * blk_set_runtime_active - Force runtime status of the queue to be active + * @q: the queue of the device + * + * If the device is left runtime suspended during system suspend the resume + * hook typically resumes the device and corrects runtime status + * accordingly. However, that does not affect the queue runtime PM status + * which is still "suspended". This prevents processing requests from the + * queue. + * + * This function can be used in driver's resume hook to correct queue + * runtime PM status and re-enable peeking requests from the queue. It + * should be called before first request is added to the queue. + */ +void blk_set_runtime_active(struct request_queue *q) +{ + spin_lock_irq(q->queue_lock); + q->rpm_status = RPM_ACTIVE; + pm_runtime_mark_last_busy(q->dev); + pm_request_autosuspend(q->dev); + spin_unlock_irq(q->queue_lock); +} +EXPORT_SYMBOL(blk_set_runtime_active); #endif int __init blk_dev_init(void) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 861643ea91b5..5083f85efea7 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -151,6 +151,15 @@ config AHCI_MVEBU If unsure, say N. +config AHCI_OCTEON + tristate "Cavium Octeon Soc Serial ATA" + depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC + default y + help + This option enables support for Cavium Octeon SoC Serial ATA. + + If unsure, say N. + config AHCI_SUNXI tristate "Allwinner sunxi AHCI SATA support" depends on ARCH_SUNXI @@ -355,7 +364,7 @@ config SATA_PROMISE config SATA_RCAR tristate "Renesas R-Car SATA support" - depends on ARCH_SHMOBILE || COMPILE_TEST + depends on ARCH_RENESAS || COMPILE_TEST help This option enables support for Renesas R-Car Serial ATA. diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index af45effac18c..18579521464e 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_AHCI_CEVA) += ahci_ceva.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_OCTEON) += ahci_octeon.o obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_TEGRA) += ahci_tegra.o libahci.o libahci_platform.o diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 146dc0b8ec61..a83bbcc58b4c 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -85,6 +85,7 @@ enum board_ids { }; static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static void ahci_remove_one(struct pci_dev *dev); static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class, @@ -94,9 +95,13 @@ static bool is_mcp89_apple(struct pci_dev *pdev); static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); #ifdef CONFIG_PM -static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); -static int ahci_pci_device_resume(struct pci_dev *pdev); +static int ahci_pci_device_runtime_suspend(struct device *dev); +static int ahci_pci_device_runtime_resume(struct device *dev); +#ifdef CONFIG_PM_SLEEP +static int ahci_pci_device_suspend(struct device *dev); +static int ahci_pci_device_resume(struct device *dev); #endif +#endif /* CONFIG_PM */ static struct scsi_host_template ahci_sht = { AHCI_SHT("ahci"), @@ -371,15 +376,11 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* Lewisburg RAID*/ { PCI_VDEVICE(INTEL, 0x2827), board_ahci }, /* Lewisburg RAID*/ { PCI_VDEVICE(INTEL, 0xa182), board_ahci }, /* Lewisburg AHCI*/ - { PCI_VDEVICE(INTEL, 0xa184), board_ahci }, /* Lewisburg RAID*/ { PCI_VDEVICE(INTEL, 0xa186), board_ahci }, /* Lewisburg RAID*/ - { PCI_VDEVICE(INTEL, 0xa18e), board_ahci }, /* Lewisburg RAID*/ { PCI_VDEVICE(INTEL, 0xa1d2), board_ahci }, /* Lewisburg RAID*/ { PCI_VDEVICE(INTEL, 0xa1d6), board_ahci }, /* Lewisburg RAID*/ { PCI_VDEVICE(INTEL, 0xa202), board_ahci }, /* Lewisburg AHCI*/ - { PCI_VDEVICE(INTEL, 0xa204), board_ahci }, /* Lewisburg RAID*/ { PCI_VDEVICE(INTEL, 0xa206), board_ahci }, /* Lewisburg RAID*/ - { PCI_VDEVICE(INTEL, 0xa20e), board_ahci }, /* Lewisburg RAID*/ { PCI_VDEVICE(INTEL, 0xa252), board_ahci }, /* Lewisburg RAID*/ { PCI_VDEVICE(INTEL, 0xa256), board_ahci }, /* Lewisburg RAID*/ @@ -563,16 +564,20 @@ static const struct pci_device_id ahci_pci_tbl[] = { { } /* terminate list */ }; +static const struct dev_pm_ops ahci_pci_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(ahci_pci_device_suspend, ahci_pci_device_resume) + SET_RUNTIME_PM_OPS(ahci_pci_device_runtime_suspend, + ahci_pci_device_runtime_resume, NULL) +}; static struct pci_driver ahci_pci_driver = { .name = DRV_NAME, .id_table = ahci_pci_tbl, .probe = ahci_init_one, - .remove = ata_pci_remove_one, -#ifdef CONFIG_PM - .suspend = ahci_pci_device_suspend, - .resume = ahci_pci_device_resume, -#endif + .remove = ahci_remove_one, + .driver = { + .pm = &ahci_pci_pm_ops, + }, }; #if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE) @@ -801,43 +806,67 @@ static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class, #ifdef CONFIG_PM -static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) +static void ahci_pci_disable_interrupts(struct ata_host *host) { - struct ata_host *host = pci_get_drvdata(pdev); struct ahci_host_priv *hpriv = host->private_data; void __iomem *mmio = hpriv->mmio; u32 ctl; - if (mesg.event & PM_EVENT_SUSPEND && - hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { + /* AHCI spec rev1.1 section 8.3.3: + * Software must disable interrupts prior to requesting a + * transition of the HBA to D3 state. + */ + ctl = readl(mmio + HOST_CTL); + ctl &= ~HOST_IRQ_EN; + writel(ctl, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ +} + +static int ahci_pci_device_runtime_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct ata_host *host = pci_get_drvdata(pdev); + + ahci_pci_disable_interrupts(host); + return 0; +} + +static int ahci_pci_device_runtime_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ahci_pci_reset_controller(host); + if (rc) + return rc; + ahci_pci_init_controller(host); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int ahci_pci_device_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct ata_host *host = pci_get_drvdata(pdev); + struct ahci_host_priv *hpriv = host->private_data; + + if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { dev_err(&pdev->dev, "BIOS update required for suspend/resume\n"); return -EIO; } - if (mesg.event & PM_EVENT_SLEEP) { - /* AHCI spec rev1.1 section 8.3.3: - * Software must disable interrupts prior to requesting a - * transition of the HBA to D3 state. - */ - ctl = readl(mmio + HOST_CTL); - ctl &= ~HOST_IRQ_EN; - writel(ctl, mmio + HOST_CTL); - readl(mmio + HOST_CTL); /* flush */ - } - - return ata_pci_device_suspend(pdev, mesg); + ahci_pci_disable_interrupts(host); + return ata_host_suspend(host, PMSG_SUSPEND); } -static int ahci_pci_device_resume(struct pci_dev *pdev) +static int ahci_pci_device_resume(struct device *dev) { + struct pci_dev *pdev = to_pci_dev(dev); struct ata_host *host = pci_get_drvdata(pdev); int rc; - rc = ata_pci_device_do_resume(pdev); - if (rc) - return rc; - /* Apple BIOS helpfully mangles the registers on resume */ if (is_mcp89_apple(pdev)) ahci_mcp89_apple_enable(pdev); @@ -856,6 +885,8 @@ static int ahci_pci_device_resume(struct pci_dev *pdev) } #endif +#endif /* CONFIG_PM */ + static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac) { int rc; @@ -1718,7 +1749,18 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_master(pdev); - return ahci_host_activate(host, &ahci_sht); + rc = ahci_host_activate(host, &ahci_sht); + if (rc) + return rc; + + pm_runtime_put_noidle(&pdev->dev); + return 0; +} + +static void ahci_remove_one(struct pci_dev *pdev) +{ + pm_runtime_get_noresume(&pdev->dev); + ata_pci_remove_one(pdev); } module_pci_driver(ahci_pci_driver); diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 167ba7e3b92e..70b06bcfb7e3 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -335,6 +335,7 @@ struct ahci_host_priv { void __iomem * mmio; /* bus-independent mem map */ u32 cap; /* cap to use */ u32 cap2; /* cap2 to use */ + u32 version; /* cached version */ u32 port_map; /* port map to use */ u32 saved_cap; /* saved initial cap */ u32 saved_cap2; /* saved initial cap2 */ diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c index f7a7fa81740e..de7128d81e9c 100644 --- a/drivers/ata/ahci_mvebu.c +++ b/drivers/ata/ahci_mvebu.c @@ -112,12 +112,15 @@ static int ahci_mvebu_probe(struct platform_device *pdev) if (rc) return rc; - dram = mv_mbus_dram_info(); - if (!dram) - return -ENODEV; + if (of_device_is_compatible(pdev->dev.of_node, + "marvell,armada-380-ahci")) { + dram = mv_mbus_dram_info(); + if (!dram) + return -ENODEV; - ahci_mvebu_mbus_config(hpriv, dram); - ahci_mvebu_regret_option(hpriv); + ahci_mvebu_mbus_config(hpriv, dram); + ahci_mvebu_regret_option(hpriv); + } rc = ahci_platform_init_host(pdev, hpriv, &ahci_mvebu_port_info, &ahci_platform_sht); @@ -133,6 +136,7 @@ disable_resources: static const struct of_device_id ahci_mvebu_of_match[] = { { .compatible = "marvell,armada-380-ahci", }, + { .compatible = "marvell,armada-3700-ahci", }, { }, }; MODULE_DEVICE_TABLE(of, ahci_mvebu_of_match); diff --git a/drivers/ata/ahci_octeon.c b/drivers/ata/ahci_octeon.c new file mode 100644 index 000000000000..ea865fe953e1 --- /dev/null +++ b/drivers/ata/ahci_octeon.c @@ -0,0 +1,105 @@ +/* + * SATA glue for Cavium Octeon III SOCs. + * + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2010-2015 Cavium Networks + * + */ + +#include +#include +#include +#include + +#include +#include + +#define CVMX_SATA_UCTL_SHIM_CFG 0xE8 + +#define SATA_UCTL_ENDIAN_MODE_BIG 1 +#define SATA_UCTL_ENDIAN_MODE_LITTLE 0 +#define SATA_UCTL_ENDIAN_MODE_MASK 3 + +#define SATA_UCTL_DMA_ENDIAN_MODE_SHIFT 8 +#define SATA_UCTL_CSR_ENDIAN_MODE_SHIFT 0 +#define SATA_UCTL_DMA_READ_CMD_SHIFT 12 + +static int ahci_octeon_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct resource *res; + void __iomem *base; + u64 cfg; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Platform resource[0] is missing\n"); + return -ENODEV; + } + + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + cfg = cvmx_readq_csr(base + CVMX_SATA_UCTL_SHIM_CFG); + + cfg &= ~(SATA_UCTL_ENDIAN_MODE_MASK << SATA_UCTL_DMA_ENDIAN_MODE_SHIFT); + cfg &= ~(SATA_UCTL_ENDIAN_MODE_MASK << SATA_UCTL_CSR_ENDIAN_MODE_SHIFT); + +#ifdef __BIG_ENDIAN + cfg |= SATA_UCTL_ENDIAN_MODE_BIG << SATA_UCTL_DMA_ENDIAN_MODE_SHIFT; + cfg |= SATA_UCTL_ENDIAN_MODE_BIG << SATA_UCTL_CSR_ENDIAN_MODE_SHIFT; +#else + cfg |= SATA_UCTL_ENDIAN_MODE_LITTLE << SATA_UCTL_DMA_ENDIAN_MODE_SHIFT; + cfg |= SATA_UCTL_ENDIAN_MODE_LITTLE << SATA_UCTL_CSR_ENDIAN_MODE_SHIFT; +#endif + + cfg |= 1 << SATA_UCTL_DMA_READ_CMD_SHIFT; + + cvmx_writeq_csr(base + CVMX_SATA_UCTL_SHIM_CFG, cfg); + + if (!node) { + dev_err(dev, "no device node, failed to add octeon sata\n"); + return -ENODEV; + } + + ret = of_platform_populate(node, NULL, NULL, dev); + if (ret) { + dev_err(dev, "failed to add ahci-platform core\n"); + return ret; + } + + return 0; +} + +static int ahci_octeon_remove(struct platform_device *pdev) +{ + return 0; +} + +static const struct of_device_id octeon_ahci_match[] = { + { .compatible = "cavium,octeon-7130-sata-uctl", }, + {}, +}; +MODULE_DEVICE_TABLE(of, octeon_ahci_match); + +static struct platform_driver ahci_octeon_driver = { + .probe = ahci_octeon_probe, + .remove = ahci_octeon_remove, + .driver = { + .name = "octeon-ahci", + .of_match_table = octeon_ahci_match, + }, +}; + +module_platform_driver(ahci_octeon_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Cavium, Inc. "); +MODULE_DESCRIPTION("Cavium Inc. sata config."); diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 04975b851c23..40442332bfa7 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -76,6 +76,7 @@ static const struct of_device_id ahci_of_match[] = { { .compatible = "ibm,476gtr-ahci", }, { .compatible = "snps,dwc-ahci", }, { .compatible = "hisilicon,hisi-ahci", }, + { .compatible = "cavium,octeon-7130-ahci", }, {}, }; MODULE_DEVICE_TABLE(of, ahci_of_match); diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c index 8e3f7faf00d3..73b19b277138 100644 --- a/drivers/ata/ahci_xgene.c +++ b/drivers/ata/ahci_xgene.c @@ -821,9 +821,9 @@ static int xgene_ahci_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "%s: Error reading device info. Assume version1\n", __func__); version = XGENE_AHCI_V1; - } - if (info->valid & ACPI_VALID_CID) + } else if (info->valid & ACPI_VALID_CID) { version = XGENE_AHCI_V2; + } } } #endif diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 85ea5142a095..3982054060b8 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -225,6 +225,31 @@ static void ahci_enable_ahci(void __iomem *mmio) WARN_ON(1); } +/** + * ahci_rpm_get_port - Make sure the port is powered on + * @ap: Port to power on + * + * Whenever there is need to access the AHCI host registers outside of + * normal execution paths, call this function to make sure the host is + * actually powered on. + */ +static int ahci_rpm_get_port(struct ata_port *ap) +{ + return pm_runtime_get_sync(ap->dev); +} + +/** + * ahci_rpm_put_port - Undoes ahci_rpm_get_port() + * @ap: Port to power down + * + * Undoes ahci_rpm_get_port() and possibly powers down the AHCI host + * if it has no more active users. + */ +static void ahci_rpm_put_port(struct ata_port *ap) +{ + pm_runtime_put(ap->dev); +} + static ssize_t ahci_show_host_caps(struct device *dev, struct device_attribute *attr, char *buf) { @@ -251,9 +276,8 @@ static ssize_t ahci_show_host_version(struct device *dev, struct Scsi_Host *shost = class_to_shost(dev); struct ata_port *ap = ata_shost_to_port(shost); struct ahci_host_priv *hpriv = ap->host->private_data; - void __iomem *mmio = hpriv->mmio; - return sprintf(buf, "%x\n", readl(mmio + HOST_VERSION)); + return sprintf(buf, "%x\n", hpriv->version); } static ssize_t ahci_show_port_cmd(struct device *dev, @@ -262,8 +286,13 @@ static ssize_t ahci_show_port_cmd(struct device *dev, struct Scsi_Host *shost = class_to_shost(dev); struct ata_port *ap = ata_shost_to_port(shost); void __iomem *port_mmio = ahci_port_base(ap); + ssize_t ret; - return sprintf(buf, "%x\n", readl(port_mmio + PORT_CMD)); + ahci_rpm_get_port(ap); + ret = sprintf(buf, "%x\n", readl(port_mmio + PORT_CMD)); + ahci_rpm_put_port(ap); + + return ret; } static ssize_t ahci_read_em_buffer(struct device *dev, @@ -279,17 +308,20 @@ static ssize_t ahci_read_em_buffer(struct device *dev, size_t count; int i; + ahci_rpm_get_port(ap); spin_lock_irqsave(ap->lock, flags); em_ctl = readl(mmio + HOST_EM_CTL); if (!(ap->flags & ATA_FLAG_EM) || em_ctl & EM_CTL_XMT || !(hpriv->em_msg_type & EM_MSG_TYPE_SGPIO)) { spin_unlock_irqrestore(ap->lock, flags); + ahci_rpm_put_port(ap); return -EINVAL; } if (!(em_ctl & EM_CTL_MR)) { spin_unlock_irqrestore(ap->lock, flags); + ahci_rpm_put_port(ap); return -EAGAIN; } @@ -317,6 +349,7 @@ static ssize_t ahci_read_em_buffer(struct device *dev, } spin_unlock_irqrestore(ap->lock, flags); + ahci_rpm_put_port(ap); return i; } @@ -341,11 +374,13 @@ static ssize_t ahci_store_em_buffer(struct device *dev, size % 4 || size > hpriv->em_buf_sz) return -EINVAL; + ahci_rpm_get_port(ap); spin_lock_irqsave(ap->lock, flags); em_ctl = readl(mmio + HOST_EM_CTL); if (em_ctl & EM_CTL_TM) { spin_unlock_irqrestore(ap->lock, flags); + ahci_rpm_put_port(ap); return -EBUSY; } @@ -358,6 +393,7 @@ static ssize_t ahci_store_em_buffer(struct device *dev, writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL); spin_unlock_irqrestore(ap->lock, flags); + ahci_rpm_put_port(ap); return size; } @@ -371,7 +407,9 @@ static ssize_t ahci_show_em_supported(struct device *dev, void __iomem *mmio = hpriv->mmio; u32 em_ctl; + ahci_rpm_get_port(ap); em_ctl = readl(mmio + HOST_EM_CTL); + ahci_rpm_put_port(ap); return sprintf(buf, "%s%s%s%s\n", em_ctl & EM_CTL_LED ? "led " : "", @@ -509,6 +547,7 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) /* record values to use during operation */ hpriv->cap = cap; hpriv->cap2 = cap2; + hpriv->version = readl(mmio + HOST_VERSION); hpriv->port_map = port_map; if (!hpriv->start_engine) @@ -1014,6 +1053,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, else return -EINVAL; + ahci_rpm_get_port(ap); spin_lock_irqsave(ap->lock, flags); /* @@ -1023,6 +1063,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, em_ctl = readl(mmio + HOST_EM_CTL); if (em_ctl & EM_CTL_TM) { spin_unlock_irqrestore(ap->lock, flags); + ahci_rpm_put_port(ap); return -EBUSY; } @@ -1050,6 +1091,8 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, emp->led_state = state; spin_unlock_irqrestore(ap->lock, flags); + ahci_rpm_put_port(ap); + return size; } @@ -2215,6 +2258,8 @@ static void ahci_pmp_detach(struct ata_port *ap) int ahci_port_resume(struct ata_port *ap) { + ahci_rpm_get_port(ap); + ahci_power_up(ap); ahci_start_port(ap); @@ -2241,6 +2286,7 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) ata_port_freeze(ap); } + ahci_rpm_put_port(ap); return rc; } #endif @@ -2356,11 +2402,10 @@ static void ahci_port_stop(struct ata_port *ap) void ahci_print_info(struct ata_host *host, const char *scc_s) { struct ahci_host_priv *hpriv = host->private_data; - void __iomem *mmio = hpriv->mmio; u32 vers, cap, cap2, impl, speed; const char *speed_s; - vers = readl(mmio + HOST_VERSION); + vers = hpriv->version; cap = hpriv->cap; cap2 = hpriv->cap2; impl = hpriv->port_map; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index e417e1a1d02c..567859ce0512 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -174,13 +174,13 @@ static ssize_t ata_scsi_park_show(struct device *device, struct ata_port *ap; struct ata_link *link; struct ata_device *dev; - unsigned long flags, now; + unsigned long now; unsigned int uninitialized_var(msecs); int rc = 0; ap = ata_shost_to_port(sdev->host); - spin_lock_irqsave(ap->lock, flags); + spin_lock_irq(ap->lock); dev = ata_scsi_find_dev(ap, sdev); if (!dev) { rc = -ENODEV; diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 17d31fc009ab..0636d84fbefe 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -61,6 +61,7 @@ enum { SATA_CHAN_ENAB = 0x40, /* SATA channel enable */ SATA_INT_GATE = 0x41, /* SATA interrupt gating */ SATA_NATIVE_MODE = 0x42, /* Native mode enable */ + SVIA_MISC_3 = 0x46, /* Miscellaneous Control III */ PATA_UDMA_TIMING = 0xB3, /* PATA timing for DMA/ cable detect */ PATA_PIO_TIMING = 0xAB, /* PATA timing register */ @@ -71,9 +72,18 @@ enum { NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4), SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */ + + SATA_HOTPLUG = (1 << 5), /* enable IRQ on hotplug */ +}; + +struct svia_priv { + bool wd_workaround; }; static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +#ifdef CONFIG_PM_SLEEP +static int svia_pci_device_resume(struct pci_dev *pdev); +#endif static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val); @@ -85,6 +95,7 @@ static void vt6420_bmdma_start(struct ata_queued_cmd *qc); static int vt6421_pata_cable_detect(struct ata_port *ap); static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev); static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev); +static void vt6421_error_handler(struct ata_port *ap); static const struct pci_device_id svia_pci_tbl[] = { { PCI_VDEVICE(VIA, 0x5337), vt6420 }, @@ -105,7 +116,7 @@ static struct pci_driver svia_pci_driver = { .probe = svia_init_one, #ifdef CONFIG_PM_SLEEP .suspend = ata_pci_device_suspend, - .resume = ata_pci_device_resume, + .resume = svia_pci_device_resume, #endif .remove = ata_pci_remove_one, }; @@ -137,6 +148,7 @@ static struct ata_port_operations vt6421_sata_ops = { .inherits = &svia_base_ops, .scr_read = svia_scr_read, .scr_write = svia_scr_write, + .error_handler = vt6421_error_handler, }; static struct ata_port_operations vt8251_ops = { @@ -536,7 +548,67 @@ static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) return 0; } -static void svia_configure(struct pci_dev *pdev, int board_id) +static void svia_wd_fix(struct pci_dev *pdev) +{ + u8 tmp8; + + pci_read_config_byte(pdev, 0x52, &tmp8); + pci_write_config_byte(pdev, 0x52, tmp8 | BIT(2)); +} + +static irqreturn_t vt6421_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + irqreturn_t rc = ata_bmdma_interrupt(irq, dev_instance); + + /* if the IRQ was not handled, it might be a hotplug IRQ */ + if (rc != IRQ_HANDLED) { + u32 serror; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + /* check for hotplug on port 0 */ + svia_scr_read(&host->ports[0]->link, SCR_ERROR, &serror); + if (serror & SERR_PHYRDY_CHG) { + ata_ehi_hotplugged(&host->ports[0]->link.eh_info); + ata_port_freeze(host->ports[0]); + rc = IRQ_HANDLED; + } + /* check for hotplug on port 1 */ + svia_scr_read(&host->ports[1]->link, SCR_ERROR, &serror); + if (serror & SERR_PHYRDY_CHG) { + ata_ehi_hotplugged(&host->ports[1]->link.eh_info); + ata_port_freeze(host->ports[1]); + rc = IRQ_HANDLED; + } + spin_unlock_irqrestore(&host->lock, flags); + } + + return rc; +} + +static void vt6421_error_handler(struct ata_port *ap) +{ + struct svia_priv *hpriv = ap->host->private_data; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 serror; + + /* see svia_configure() for description */ + if (!hpriv->wd_workaround) { + svia_scr_read(&ap->link, SCR_ERROR, &serror); + if (serror == 0x1000500) { + ata_port_warn(ap, "Incompatible drive: enabling workaround. This slows down transfer rate to ~60 MB/s"); + svia_wd_fix(pdev); + hpriv->wd_workaround = true; + ap->link.eh_context.i.flags |= ATA_EHI_QUIET; + } + } + + ata_sff_error_handler(ap); +} + +static void svia_configure(struct pci_dev *pdev, int board_id, + struct svia_priv *hpriv) { u8 tmp8; @@ -572,6 +644,16 @@ static void svia_configure(struct pci_dev *pdev, int board_id) pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8); } + /* enable IRQ on hotplug */ + pci_read_config_byte(pdev, SVIA_MISC_3, &tmp8); + if ((tmp8 & SATA_HOTPLUG) != SATA_HOTPLUG) { + dev_dbg(&pdev->dev, + "enabling SATA hotplug (0x%x)\n", + (int) tmp8); + tmp8 |= SATA_HOTPLUG; + pci_write_config_byte(pdev, SVIA_MISC_3, tmp8); + } + /* * vt6420/1 has problems talking to some drives. The following * is the fix from Joseph Chan . @@ -593,11 +675,15 @@ static void svia_configure(struct pci_dev *pdev, int board_id) * https://bugzilla.kernel.org/show_bug.cgi?id=15173 * http://article.gmane.org/gmane.linux.ide/46352 * http://thread.gmane.org/gmane.linux.kernel/1062139 + * + * As the fix slows down data transfer, apply it only if the error + * actually appears - see vt6421_error_handler() + * Apply the fix always on vt6420 as we don't know if SCR_ERROR can be + * read safely. */ - if (board_id == vt6420 || board_id == vt6421) { - pci_read_config_byte(pdev, 0x52, &tmp8); - tmp8 |= 1 << 2; - pci_write_config_byte(pdev, 0x52, tmp8); + if (board_id == vt6420) { + svia_wd_fix(pdev); + hpriv->wd_workaround = true; } } @@ -608,6 +694,7 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct ata_host *host = NULL; int board_id = (int) ent->driver_data; const unsigned *bar_sizes; + struct svia_priv *hpriv; ata_print_version_once(&pdev->dev, DRV_VERSION); @@ -647,11 +734,39 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; - svia_configure(pdev, board_id); + hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + host->private_data = hpriv; + + svia_configure(pdev, board_id, hpriv); pci_set_master(pdev); - return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, - IRQF_SHARED, &svia_sht); + if (board_id == vt6421) + return ata_host_activate(host, pdev->irq, vt6421_interrupt, + IRQF_SHARED, &svia_sht); + else + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, + IRQF_SHARED, &svia_sht); } +#ifdef CONFIG_PM_SLEEP +static int svia_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + struct svia_priv *hpriv = host->private_data; + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + if (hpriv->wd_workaround) + svia_wd_fix(pdev); + ata_host_resume(host); + + return 0; +} +#endif + module_pci_driver(svia_pci_driver); diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 94025c5cf797..1547bd93c70b 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -250,6 +250,12 @@ int scsi_add_host_with_dma(struct Scsi_Host *shost, struct device *dev, if (error) goto out_destroy_freelist; + /* + * Increase usage count temporarily here so that calling + * scsi_autopm_put_host() will trigger runtime idle if there is + * nothing else preventing suspending the device. + */ + pm_runtime_get_noresume(&shost->shost_gendev); pm_runtime_set_active(&shost->shost_gendev); pm_runtime_enable(&shost->shost_gendev); device_enable_async_suspend(&shost->shost_gendev); @@ -290,6 +296,7 @@ int scsi_add_host_with_dma(struct Scsi_Host *shost, struct device *dev, goto out_destroy_host; scsi_proc_host_add(shost); + scsi_autopm_put_host(shost); return error; out_destroy_host: diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c index 459abe1dcc87..b44c1bb687a2 100644 --- a/drivers/scsi/scsi_pm.c +++ b/drivers/scsi/scsi_pm.c @@ -139,6 +139,16 @@ static int scsi_bus_resume_common(struct device *dev, else fn = NULL; + /* + * Forcibly set runtime PM status of request queue to "active" to + * make sure we can again get requests from the queue (see also + * blk_pm_peek_request()). + * + * The resume hook will correct runtime PM status of the disk. + */ + if (scsi_is_sdev_device(dev) && pm_runtime_suspended(dev)) + blk_set_runtime_active(to_scsi_device(dev)->request_queue); + if (fn) { async_schedule_domain(fn, dev, &scsi_sd_pm_domain); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 413c84fbc4ed..8a11b69dfc08 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1029,6 +1029,7 @@ extern int blk_pre_runtime_suspend(struct request_queue *q); extern void blk_post_runtime_suspend(struct request_queue *q, int err); extern void blk_pre_runtime_resume(struct request_queue *q); extern void blk_post_runtime_resume(struct request_queue *q, int err); +extern void blk_set_runtime_active(struct request_queue *q); #else static inline void blk_pm_runtime_init(struct request_queue *q, struct device *dev) {} @@ -1039,6 +1040,7 @@ static inline int blk_pre_runtime_suspend(struct request_queue *q) static inline void blk_post_runtime_suspend(struct request_queue *q, int err) {} static inline void blk_pre_runtime_resume(struct request_queue *q) {} static inline void blk_post_runtime_resume(struct request_queue *q, int err) {} +extern inline void blk_set_runtime_active(struct request_queue *q) {} #endif /*