renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 07:04:00 +08:00
Code

igc: Fix igc_ptp_rx_pktstamp()

Browse Source 
The comment describing the timestamps layout in the packet buffer is
wrong and the code is actually retrieving the timestamp in Timer 1
reference instead of Timer 0. This hasn't been a big issue so far
because hardware is configured to report both timestamps using Timer 0
(see IGC_SRRCTL register configuration in igc_ptp_enable_rx_timestamp()
helper). This patch fixes the comment and the code so we retrieve the
timestamp in Timer 0 reference as expected.

This patch also takes the opportunity to get rid of the hw.mac.type check
since it is not required.

Fixes: 81b055205e ("igc: Add support for RX timestamping")
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This commit is contained in:
Andre Guedes 2021-03-09 22:42:56 -08:00 committed by Tony Nguyen
parent 9a4a1cdc5a
commit fc9e502097
2 changed files with 39 additions and 31 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/net/ethernet/intel/igc/igc.h
View File

@ -547,7 +547,7 @@ void igc_ptp_init(struct igc_adapter *adapter);
void igc_ptp_reset(struct igc_adapter *adapter);
void igc_ptp_suspend(struct igc_adapter *adapter);
void igc_ptp_stop(struct igc_adapter *adapter);
void igc_ptp_rx_pktstamp(struct igc_q_vector *q_vector, void *va,
void igc_ptp_rx_pktstamp(struct igc_q_vector *q_vector, __le32 *va,
struct sk_buff *skb);
int igc_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr);
int igc_ptp_get_ts_config(struct net_device *netdev, struct ifreq *ifr);

68
drivers/net/ethernet/intel/igc/igc_ptp.c
View File

@ -152,46 +152,54 @@ static void igc_ptp_systim_to_hwtstamp(struct igc_adapter *adapter,
}
/**
* igc_ptp_rx_pktstamp - retrieve Rx per packet timestamp
* igc_ptp_rx_pktstamp - Retrieve timestamp from Rx packet buffer
* @q_vector: Pointer to interrupt specific structure
* @va: Pointer to address containing Rx buffer
* @skb: Buffer containing timestamp and packet
*
* This function is meant to retrieve the first timestamp from the
* first buffer of an incoming frame. The value is stored in little
* endian format starting on byte 0. There's a second timestamp
* starting on byte 8.
**/
void igc_ptp_rx_pktstamp(struct igc_q_vector *q_vector, void *va,
* This function retrieves the timestamp saved in the beginning of packet
* buffer. While two timestamps are available, one in timer0 reference and the
* other in timer1 reference, this function considers only the timestamp in
* timer0 reference.
*/
void igc_ptp_rx_pktstamp(struct igc_q_vector *q_vector, __le32 *va,
struct sk_buff *skb)
{
struct igc_adapter *adapter = q_vector->adapter;
__le64 *regval = (__le64 *)va;
int adjust = 0;
u64 regval;
int adjust;
/* The timestamp is recorded in little endian format.
* DWORD: | 0 | 1 | 2 | 3
* Field: | Timer0 Low | Timer0 High | Timer1 Low | Timer1 High
/* Timestamps are saved in little endian at the beginning of the packet
* buffer following the layout:
*
* DWORD: | 0 | 1 | 2 | 3 |
* Field: | Timer1 SYSTIML | Timer1 SYSTIMH | Timer0 SYSTIML | Timer0 SYSTIMH |
*
* SYSTIML holds the nanoseconds part while SYSTIMH holds the seconds
* part of the timestamp.
*/
igc_ptp_systim_to_hwtstamp(adapter, skb_hwtstamps(skb),
le64_to_cpu(regval[0]));
regval = le32_to_cpu(va[2]);
regval |= (u64)le32_to_cpu(va[3]) << 32;
igc_ptp_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), regval);
/* adjust timestamp for the RX latency based on link speed */
if (adapter->hw.mac.type == igc_i225) {
switch (adapter->link_speed) {
case SPEED_10:
adjust = IGC_I225_RX_LATENCY_10;
break;
case SPEED_100:
adjust = IGC_I225_RX_LATENCY_100;
break;
case SPEED_1000:
adjust = IGC_I225_RX_LATENCY_1000;
break;
case SPEED_2500:
adjust = IGC_I225_RX_LATENCY_2500;
break;
}
/* Adjust timestamp for the RX latency based on link speed */
switch (adapter->link_speed) {
case SPEED_10:
adjust = IGC_I225_RX_LATENCY_10;
break;
case SPEED_100:
adjust = IGC_I225_RX_LATENCY_100;
break;
case SPEED_1000:
adjust = IGC_I225_RX_LATENCY_1000;
break;
case SPEED_2500:
adjust = IGC_I225_RX_LATENCY_2500;
break;
default:
adjust = 0;
netdev_warn_once(adapter->netdev, "Imprecise timestamp\n");
break;
}
skb_hwtstamps(skb)->hwtstamp =
ktime_sub_ns(skb_hwtstamps(skb)->hwtstamp, adjust);