renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 13:13:57 +08:00
Code

block, bfq: do not idle for lowest-weight queues

Browse Source 
In most cases, it is detrimental for throughput to plug I/O dispatch
when the in-service bfq_queue becomes temporarily empty (plugging is
performed to wait for the possible arrival, soon, of new I/O from the
in-service queue). There is however a case where plugging is needed
for service guarantees. If a bfq_queue, say Q, has a higher weight
than some other active bfq_queue, and is sync, i.e., contains sync
I/O, then, to guarantee that Q does receive a higher share of the
throughput than other lower-weight queues, it is necessary to plug I/O
dispatch when Q remains temporarily empty while being served.

For this reason, BFQ performs I/O plugging when some active bfq_queue
has a higher weight than some other active bfq_queue. But this is
unnecessarily overkill. In fact, if the in-service bfq_queue actually
has a weight lower than or equal to the other queues, then the queue
*must not* be guaranteed a higher share of the throughput than the
other queues. So, not plugging I/O cannot cause any harm to the
queue. And can boost throughput.

Taking advantage of this fact, this commit does not plug I/O for sync
bfq_queues with a weight lower than or equal to the weights of the
other queues. Here is an example of the resulting throughput boost
with the dbench workload, which is particularly nasty for BFQ. With
the dbench test in the Phoronix suite, BFQ reaches its lowest total
throughput with 6 clients on a filesystem with journaling, in case the
journaling daemon has a higher weight than normal processes. Before
this commit, the total throughput was ~80 MB/sec on a PLEXTOR PX-256M5,
after this commit it is ~100 MB/sec.

Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This commit is contained in:
Paolo Valente 2019-03-12 09:59:28 +01:00 committed by Jens Axboe
parent 778c02a236
commit fb53ac6cd0
3 changed files with 118 additions and 94 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

198
block/bfq-iosched.c
View File

@ -629,12 +629,19 @@ void bfq_pos_tree_add_move(struct bfq_data *bfqd, struct bfq_queue *bfqq)
}
/*
* The following function returns true if every queue must receive the
* same share of the throughput (this condition is used when deciding
* whether idling may be disabled, see the comments in the function
* bfq_better_to_idle()).
* The following function returns false either if every active queue
* must receive the same share of the throughput (symmetric scenario),
* or, as a special case, if bfqq must receive a share of the
* throughput lower than or equal to the share that every other active
* queue must receive. If bfqq does sync I/O, then these are the only
* two cases where bfqq happens to be guaranteed its share of the
* throughput even if I/O dispatching is not plugged when bfqq remains
* temporarily empty (for more details, see the comments in the
* function bfq_better_to_idle()). For this reason, the return value
* of this function is used to check whether I/O-dispatch plugging can
* be avoided.
*
* Such a scenario occurs when:
* The above first case (symmetric scenario) occurs when:
* 1) all active queues have the same weight,
* 2) all active queues belong to the same I/O-priority class,
* 3) all active groups at the same level in the groups tree have the same
@ -654,30 +661,36 @@ void bfq_pos_tree_add_move(struct bfq_data *bfqd, struct bfq_queue *bfqq)
* support or the cgroups interface are not enabled, thus no state
* needs to be maintained in this case.
*/
static bool bfq_symmetric_scenario(struct bfq_data *bfqd)
static bool bfq_asymmetric_scenario(struct bfq_data *bfqd,
struct bfq_queue *bfqq)
{
bool smallest_weight = bfqq &&
bfqq->weight_counter &&
bfqq->weight_counter ==
container_of(
rb_first_cached(&bfqd->queue_weights_tree),
struct bfq_weight_counter,
weights_node);
/*
* For queue weights to differ, queue_weights_tree must contain
* at least two nodes.
*/
bool varied_queue_weights = !RB_EMPTY_ROOT(&bfqd->queue_weights_tree) &&
(bfqd->queue_weights_tree.rb_node->rb_left ||
bfqd->queue_weights_tree.rb_node->rb_right);
bool varied_queue_weights = !smallest_weight &&
!RB_EMPTY_ROOT(&bfqd->queue_weights_tree.rb_root) &&
(bfqd->queue_weights_tree.rb_root.rb_node->rb_left ||
bfqd->queue_weights_tree.rb_root.rb_node->rb_right);
bool multiple_classes_busy =
(bfqd->busy_queues[0] && bfqd->busy_queues[1]) ||
(bfqd->busy_queues[0] && bfqd->busy_queues[2]) ||
(bfqd->busy_queues[1] && bfqd->busy_queues[2]);
/*
* For queue weights to differ, queue_weights_tree must contain
* at least two nodes.
*/
return !(varied_queue_weights || multiple_classes_busy
return varied_queue_weights || multiple_classes_busy
#ifdef CONFIG_BFQ_GROUP_IOSCHED
|| bfqd->num_groups_with_pending_reqs > 0
#endif
);
;
}
/*
@ -694,10 +707,11 @@ static bool bfq_symmetric_scenario(struct bfq_data *bfqd)
* should be low too.
*/
void bfq_weights_tree_add(struct bfq_data *bfqd, struct bfq_queue *bfqq,
struct rb_root *root)
struct rb_root_cached *root)
{
struct bfq_entity *entity = &bfqq->entity;
struct rb_node **new = &(root->rb_node), *parent = NULL;
struct rb_node **new = &(root->rb_root.rb_node), *parent = NULL;
bool leftmost = true;
/*
* Do not insert if the queue is already associated with a
@ -726,8 +740,10 @@ void bfq_weights_tree_add(struct bfq_data *bfqd, struct bfq_queue *bfqq,
}
if (entity->weight < __counter->weight)
new = &((*new)->rb_left);
else
else {
new = &((*new)->rb_right);
leftmost = false;
}
}
bfqq->weight_counter = kzalloc(sizeof(struct bfq_weight_counter),
@ -736,7 +752,7 @@ void bfq_weights_tree_add(struct bfq_data *bfqd, struct bfq_queue *bfqq,
/*
* In the unlucky event of an allocation failure, we just
* exit. This will cause the weight of queue to not be
* considered in bfq_symmetric_scenario, which, in its turn,
* considered in bfq_asymmetric_scenario, which, in its turn,
* causes the scenario to be deemed wrongly symmetric in case
* bfqq's weight would have been the only weight making the
* scenario asymmetric. On the bright side, no unbalance will
@ -750,7 +766,8 @@ void bfq_weights_tree_add(struct bfq_data *bfqd, struct bfq_queue *bfqq,
bfqq->weight_counter->weight = entity->weight;
rb_link_node(&bfqq->weight_counter->weights_node, parent, new);
rb_insert_color(&bfqq->weight_counter->weights_node, root);
rb_insert_color_cached(&bfqq->weight_counter->weights_node, root,
leftmost);
inc_counter:
bfqq->weight_counter->num_active++;
@ -765,7 +782,7 @@ inc_counter:
*/
void __bfq_weights_tree_remove(struct bfq_data *bfqd,
struct bfq_queue *bfqq,
struct rb_root *root)
struct rb_root_cached *root)
{
if (!bfqq->weight_counter)
return;
@ -774,7 +791,7 @@ void __bfq_weights_tree_remove(struct bfq_data *bfqd,
if (bfqq->weight_counter->num_active > 0)
goto reset_entity_pointer;
rb_erase(&bfqq->weight_counter->weights_node, root);
rb_erase_cached(&bfqq->weight_counter->weights_node, root);
kfree(bfqq->weight_counter);
reset_entity_pointer:
@ -889,7 +906,7 @@ static unsigned long bfq_serv_to_charge(struct request *rq,
struct bfq_queue *bfqq)
{
if (bfq_bfqq_sync(bfqq) || bfqq->wr_coeff > 1 ||
!bfq_symmetric_scenario(bfqq->bfqd))
bfq_asymmetric_scenario(bfqq->bfqd, bfqq))
return blk_rq_sectors(rq);
return blk_rq_sectors(rq) * bfq_async_charge_factor;
@ -2543,7 +2560,7 @@ static void bfq_arm_slice_timer(struct bfq_data *bfqd)
* queue).
*/
if (BFQQ_SEEKY(bfqq) && bfqq->wr_coeff == 1 &&
bfq_symmetric_scenario(bfqd))
!bfq_asymmetric_scenario(bfqd, bfqq))
sl = min_t(u64, sl, BFQ_MIN_TT);
else if (bfqq->wr_coeff > 1)
sl = max_t(u32, sl, 20ULL * NSEC_PER_MSEC);
@ -3500,8 +3517,9 @@ static bool idling_boosts_thr_without_issues(struct bfq_data *bfqd,
}
/*
* There is a case where idling must be performed not for
* throughput concerns, but to preserve service guarantees.
* There is a case where idling does not have to be performed for
* throughput concerns, but to preserve the throughput share of
* the process associated with bfqq.
*
* To introduce this case, we can note that allowing the drive
* to enqueue more than one request at a time, and hence
@ -3517,77 +3535,83 @@ static bool idling_boosts_thr_without_issues(struct bfq_data *bfqd,
* concern about per-process throughput distribution, and
* makes its decisions only on a per-request basis. Therefore,
* the service distribution enforced by the drive's internal
* scheduler is likely to coincide with the desired
* device-throughput distribution only in a completely
* symmetric scenario where:
* (i) each of these processes must get the same throughput as
* the others;
* scheduler is likely to coincide with the desired throughput
* distribution only in a completely symmetric, or favorably
* skewed scenario where:
* (i-a) each of these processes must get the same throughput as
* the others,
* (i-b) in case (i-a) does not hold, it holds that the process
* associated with bfqq must receive a lower or equal
* throughput than any of the other processes;
* (ii) the I/O of each process has the same properties, in
* terms of locality (sequential or random), direction
* (reads or writes), request sizes, greediness
* (from I/O-bound to sporadic), and so on.
* In fact, in such a scenario, the drive tends to treat
* the requests of each of these processes in about the same
* way as the requests of the others, and thus to provide
* each of these processes with about the same throughput
* (which is exactly the desired throughput distribution). In
* contrast, in any asymmetric scenario, device idling is
* certainly needed to guarantee that bfqq receives its
* assigned fraction of the device throughput (see [1] for
* details).
* The problem is that idling may significantly reduce
* throughput with certain combinations of types of I/O and
* devices. An important example is sync random I/O, on flash
* storage with command queueing. So, unless bfqq falls in the
* above cases where idling also boosts throughput, it would
* be important to check conditions (i) and (ii) accurately,
* so as to avoid idling when not strictly needed for service
* guarantees.
* (from I/O-bound to sporadic), and so on;
* In fact, in such a scenario, the drive tends to treat the requests
* of each process in about the same way as the requests of the
* others, and thus to provide each of these processes with about the
* same throughput. This is exactly the desired throughput
* distribution if (i-a) holds, or, if (i-b) holds instead, this is an
* even more convenient distribution for (the process associated with)
* bfqq.
*
* Unfortunately, it is extremely difficult to thoroughly
* check condition (ii). And, in case there are active groups,
* it becomes very difficult to check condition (i) too. In
* fact, if there are active groups, then, for condition (i)
* to become false, it is enough that an active group contains
* more active processes or sub-groups than some other active
* group. More precisely, for condition (i) to hold because of
* such a group, it is not even necessary that the group is
* (still) active: it is sufficient that, even if the group
* has become inactive, some of its descendant processes still
* have some request already dispatched but still waiting for
* completion. In fact, requests have still to be guaranteed
* their share of the throughput even after being
* dispatched. In this respect, it is easy to show that, if a
* group frequently becomes inactive while still having
* in-flight requests, and if, when this happens, the group is
* not considered in the calculation of whether the scenario
* is asymmetric, then the group may fail to be guaranteed its
* fair share of the throughput (basically because idling may
* not be performed for the descendant processes of the group,
* but it had to be). We address this issue with the
* following bi-modal behavior, implemented in the function
* bfq_symmetric_scenario().
* In contrast, in any asymmetric or unfavorable scenario, device
* idling (I/O-dispatch plugging) is certainly needed to guarantee
* that bfqq receives its assigned fraction of the device throughput
* (see [1] for details).
*
* The problem is that idling may significantly reduce throughput with
* certain combinations of types of I/O and devices. An important
* example is sync random I/O on flash storage with command
* queueing. So, unless bfqq falls in cases where idling also boosts
* throughput, it is important to check conditions (i-a), i(-b) and
* (ii) accurately, so as to avoid idling when not strictly needed for
* service guarantees.
*
* Unfortunately, it is extremely difficult to thoroughly check
* condition (ii). And, in case there are active groups, it becomes
* very difficult to check conditions (i-a) and (i-b) too. In fact,
* if there are active groups, then, for conditions (i-a) or (i-b) to
* become false 'indirectly', it is enough that an active group
* contains more active processes or sub-groups than some other active
* group. More precisely, for conditions (i-a) or (i-b) to become
* false because of such a group, it is not even necessary that the
* group is (still) active: it is sufficient that, even if the group
* has become inactive, some of its descendant processes still have
* some request already dispatched but still waiting for
* completion. In fact, requests have still to be guaranteed their
* share of the throughput even after being dispatched. In this
* respect, it is easy to show that, if a group frequently becomes
* inactive while still having in-flight requests, and if, when this
* happens, the group is not considered in the calculation of whether
* the scenario is asymmetric, then the group may fail to be
* guaranteed its fair share of the throughput (basically because
* idling may not be performed for the descendant processes of the
* group, but it had to be). We address this issue with the following
* bi-modal behavior, implemented in the function
* bfq_asymmetric_scenario().
*
* If there are groups with requests waiting for completion
* (as commented above, some of these groups may even be
* already inactive), then the scenario is tagged as
* asymmetric, conservatively, without checking any of the
* conditions (i) and (ii). So the device is idled for bfqq.
* conditions (i-a), (i-b) or (ii). So the device is idled for bfqq.
* This behavior matches also the fact that groups are created
* exactly if controlling I/O is a primary concern (to
* preserve bandwidth and latency guarantees).
*
* On the opposite end, if there are no groups with requests
* waiting for completion, then only condition (i) is actually
* controlled, i.e., provided that condition (i) holds, idling
* is not performed, regardless of whether condition (ii)
* holds. In other words, only if condition (i) does not hold,
* then idling is allowed, and the device tends to be
* prevented from queueing many requests, possibly of several
* processes. Since there are no groups with requests waiting
* for completion, then, to control condition (i) it is enough
* to check just whether all the queues with requests waiting
* for completion also have the same weight.
* On the opposite end, if there are no groups with requests waiting
* for completion, then only conditions (i-a) and (i-b) are actually
* controlled, i.e., provided that conditions (i-a) or (i-b) holds,
* idling is not performed, regardless of whether condition (ii)
* holds. In other words, only if conditions (i-a) and (i-b) do not
* hold, then idling is allowed, and the device tends to be prevented
* from queueing many requests, possibly of several processes. Since
* there are no groups with requests waiting for completion, then, to
* control conditions (i-a) and (i-b) it is enough to check just
* whether all the queues with requests waiting for completion also
* have the same weight.
*
* Not checking condition (ii) evidently exposes bfqq to the
* risk of getting less throughput than its fair share.
@ -3639,7 +3663,7 @@ static bool idling_boosts_thr_without_issues(struct bfq_data *bfqd,
* compound condition that is checked below for deciding
* whether the scenario is asymmetric. To explain this
* compound condition, we need to add that the function
* bfq_symmetric_scenario checks the weights of only
* bfq_asymmetric_scenario checks the weights of only
* non-weight-raised queues, for efficiency reasons (see
* comments on bfq_weights_tree_add()). Then the fact that
* bfqq is weight-raised is checked explicitly here. More
@ -3667,7 +3691,7 @@ static bool idling_needed_for_service_guarantees(struct bfq_data *bfqd,
return (bfqq->wr_coeff > 1 &&
bfqd->wr_busy_queues <
bfq_tot_busy_queues(bfqd)) ||
!bfq_symmetric_scenario(bfqd);
bfq_asymmetric_scenario(bfqd, bfqq);
}
/*
@ -5505,7 +5529,7 @@ static int bfq_init_queue(struct request_queue *q, struct elevator_type *e)
HRTIMER_MODE_REL);
bfqd->idle_slice_timer.function = bfq_idle_slice_timer;
bfqd->queue_weights_tree = RB_ROOT;
bfqd->queue_weights_tree = RB_ROOT_CACHED;
bfqd->num_groups_with_pending_reqs = 0;
INIT_LIST_HEAD(&bfqd->active_list);

6
block/bfq-iosched.h
View File

@ -450,7 +450,7 @@ struct bfq_data {
* weight-raised @bfq_queue (see the comments to the functions
* bfq_weights_tree_[add|remove] for further details).
*/
struct rb_root queue_weights_tree;
struct rb_root_cached queue_weights_tree;
/*
* Number of groups with at least one descendant process that
@ -898,10 +898,10 @@ void bic_set_bfqq(struct bfq_io_cq *bic, struct bfq_queue *bfqq, bool is_sync);
struct bfq_data *bic_to_bfqd(struct bfq_io_cq *bic);
void bfq_pos_tree_add_move(struct bfq_data *bfqd, struct bfq_queue *bfqq);
void bfq_weights_tree_add(struct bfq_data *bfqd, struct bfq_queue *bfqq,
struct rb_root *root);
struct rb_root_cached *root);
void __bfq_weights_tree_remove(struct bfq_data *bfqd,
struct bfq_queue *bfqq,
struct rb_root *root);
struct rb_root_cached *root);
void bfq_weights_tree_remove(struct bfq_data *bfqd,
struct bfq_queue *bfqq);
void bfq_bfqq_expire(struct bfq_data *bfqd, struct bfq_queue *bfqq,

2
block/bfq-wf2q.c
View File

@ -737,7 +737,7 @@ __bfq_entity_update_weight_prio(struct bfq_service_tree *old_st,
struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
unsigned int prev_weight, new_weight;
struct bfq_data *bfqd = NULL;
struct rb_root *root;
struct rb_root_cached *root;
#ifdef CONFIG_BFQ_GROUP_IOSCHED
struct bfq_sched_data *sd;
struct bfq_group *bfqg;