From 126fa4b9ca5d9d7cb7d46f779ad3bd3631ca387c Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Thu, 12 May 2005 20:09:17 -0400 Subject: [PATCH 001/160] [PATCH] r8169: incoming frame length check The size of the incoming frame is not correctly checked. The RxMaxSize register (0xDA) does not work as expected and incoming frames whose size exceeds the MTU actually end spanning multiple descriptors. The first Rx descriptor contains the size of the whole frame (or some garbage in its place). The driver does not expect something above the space allocated to the current skb and crashes loudly when it issues a skb_put. The fix contains two parts: - disable hardware Rx size filtering: so far it only proved to be able to trigger some new fancy errors; - drop multi-descriptors frame: as the driver allocates MTU sized Rx buffers, it provides an adequate filtering. As a bonus, wrong descriptors were not returned to the asic after their processing. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/r8169.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index c59507f8a76b..b3768d844747 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1585,8 +1585,8 @@ rtl8169_hw_start(struct net_device *dev) RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb); RTL_W8(EarlyTxThres, EarlyTxThld); - /* For gigabit rtl8169, MTU + header + CRC + VLAN */ - RTL_W16(RxMaxSize, tp->rx_buf_sz); + /* Low hurts. Let's disable the filtering. */ + RTL_W16(RxMaxSize, 16383); /* Set Rx Config register */ i = rtl8169_rx_config | @@ -2127,6 +2127,11 @@ rtl8169_tx_interrupt(struct net_device *dev, struct rtl8169_private *tp, } } +static inline int rtl8169_fragmented_frame(u32 status) +{ + return (status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag); +} + static inline void rtl8169_rx_csum(struct sk_buff *skb, struct RxDesc *desc) { u32 opts1 = le32_to_cpu(desc->opts1); @@ -2177,27 +2182,41 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, while (rx_left > 0) { unsigned int entry = cur_rx % NUM_RX_DESC; + struct RxDesc *desc = tp->RxDescArray + entry; u32 status; rmb(); - status = le32_to_cpu(tp->RxDescArray[entry].opts1); + status = le32_to_cpu(desc->opts1); if (status & DescOwn) break; if (status & RxRES) { - printk(KERN_INFO "%s: Rx ERROR!!!\n", dev->name); + printk(KERN_INFO "%s: Rx ERROR. status = %08x\n", + dev->name, status); tp->stats.rx_errors++; if (status & (RxRWT | RxRUNT)) tp->stats.rx_length_errors++; if (status & RxCRC) tp->stats.rx_crc_errors++; + rtl8169_mark_to_asic(desc, tp->rx_buf_sz); } else { - struct RxDesc *desc = tp->RxDescArray + entry; struct sk_buff *skb = tp->Rx_skbuff[entry]; int pkt_size = (status & 0x00001FFF) - 4; void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int) = pci_dma_sync_single_for_device; + /* + * The driver does not support incoming fragmented + * frames. They are seen as a symptom of over-mtu + * sized frames. + */ + if (unlikely(rtl8169_fragmented_frame(status))) { + tp->stats.rx_dropped++; + tp->stats.rx_length_errors++; + rtl8169_mark_to_asic(desc, tp->rx_buf_sz); + goto move_on; + } + rtl8169_rx_csum(skb, desc); pci_dma_sync_single_for_cpu(tp->pci_dev, @@ -2224,7 +2243,7 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, tp->stats.rx_bytes += pkt_size; tp->stats.rx_packets++; } - +move_on: cur_rx++; rx_left--; } From b9a6eaffe7ff3d3481efa9fa353b2c6a02eda756 Mon Sep 17 00:00:00 2001 From: Daniel Ritz Date: Sun, 10 Apr 2005 20:27:45 +0200 Subject: [PATCH 002/160] [PATCH] 3c574_cs: disable interrupts in el3_close 3c574_cs forgets to disable interrupts during el3_close(). fix it by doing what 3c59x does. Signed-off-by: Daniel Ritz --- drivers/net/pcmcia/3c574_cs.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 41e517114807..c6e8b25f9685 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -1274,6 +1274,9 @@ static int el3_close(struct net_device *dev) spin_lock_irqsave(&lp->window_lock, flags); update_stats(dev); spin_unlock_irqrestore(&lp->window_lock, flags); + + /* force interrupts off */ + outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); } link->open--; From d0d2f2df65ddea9a30ddd117f769bfff65d3fc56 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 2 Jun 2005 15:12:36 -0700 Subject: [PATCH 003/160] [CIFS] Update cifs version number and fix whitespace Signed-off-by: Steve French (sfrench@us.ibm.com) --- fs/cifs/cifsfs.h | 2 +- fs/cifs/inode.c | 34 +++++++++++++++++----------------- 2 files changed, 18 insertions(+), 18 deletions(-) diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index d00b3bfe1a52..78af5850c558 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -96,5 +96,5 @@ extern ssize_t cifs_getxattr(struct dentry *, const char *, void *, size_t); extern ssize_t cifs_listxattr(struct dentry *, char *, size_t); extern int cifs_ioctl (struct inode * inode, struct file * filep, unsigned int command, unsigned long arg); -#define CIFS_VERSION "1.34" +#define CIFS_VERSION "1.35" #endif /* _CIFSFS_H */ diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index b8b78cbb34c9..8d336a900255 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -82,12 +82,12 @@ int cifs_get_inode_info_unix(struct inode **pinode, /* get new inode */ if (*pinode == NULL) { *pinode = new_inode(sb); - if(*pinode == NULL) + if (*pinode == NULL) return -ENOMEM; /* Is an i_ino of zero legal? */ /* Are there sanity checks we can use to ensure that the server is really filling in that field? */ - if(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) { + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) { (*pinode)->i_ino = (unsigned long)findData.UniqueId; } /* note ino incremented to unique num in new_inode */ @@ -134,7 +134,7 @@ int cifs_get_inode_info_unix(struct inode **pinode, inode->i_gid = le64_to_cpu(findData.Gid); inode->i_nlink = le64_to_cpu(findData.Nlinks); - if(is_size_safe_to_change(cifsInfo)) { + if (is_size_safe_to_change(cifsInfo)) { /* can not safely change the file size here if the client is writing to it due to potential races */ @@ -162,7 +162,7 @@ int cifs_get_inode_info_unix(struct inode **pinode, if (S_ISREG(inode->i_mode)) { cFYI(1, (" File inode ")); inode->i_op = &cifs_file_inode_ops; - if(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) inode->i_fop = &cifs_file_direct_ops; else inode->i_fop = &cifs_file_ops; @@ -198,17 +198,17 @@ int cifs_get_inode_info(struct inode **pinode, pTcon = cifs_sb->tcon; cFYI(1,("Getting info on %s ", search_path)); - if((pfindData == NULL) && (*pinode != NULL)) { - if(CIFS_I(*pinode)->clientCanCacheRead) { + if ((pfindData == NULL) && (*pinode != NULL)) { + if (CIFS_I(*pinode)->clientCanCacheRead) { cFYI(1,("No need to revalidate cached inode sizes")); return rc; } } /* if file info not passed in then get it from server */ - if(pfindData == NULL) { + if (pfindData == NULL) { buf = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL); - if(buf == NULL) + if (buf == NULL) return -ENOMEM; pfindData = (FILE_ALL_INFO *)buf; /* could do find first instead but this returns more info */ @@ -268,7 +268,7 @@ int cifs_get_inode_info(struct inode **pinode, IndexNumber field is not guaranteed unique? */ #ifdef CONFIG_CIFS_EXPERIMENTAL - if(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM){ + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM){ int rc1 = 0; __u64 inode_num; @@ -277,7 +277,7 @@ int cifs_get_inode_info(struct inode **pinode, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); - if(rc1) { + if (rc1) { cFYI(1,("GetSrvInodeNum rc %d", rc1)); /* BB EOPNOSUPP disable SERVER_INUM? */ } else /* do we need cast or hash to ino? */ @@ -355,7 +355,7 @@ int cifs_get_inode_info(struct inode **pinode, if (S_ISREG(inode->i_mode)) { cFYI(1, (" File inode ")); inode->i_op = &cifs_file_inode_ops; - if(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) inode->i_fop = &cifs_file_direct_ops; else inode->i_fop = &cifs_file_ops; @@ -422,7 +422,7 @@ int cifs_unlink(struct inode *inode, struct dentry *direntry) cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); if (!rc) { - if(direntry->d_inode) + if (direntry->d_inode) direntry->d_inode->i_nlink--; } else if (rc == -ENOENT) { d_drop(direntry); @@ -441,7 +441,7 @@ int cifs_unlink(struct inode *inode, struct dentry *direntry) cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); CIFSSMBClose(xid, pTcon, netfid); - if(direntry->d_inode) + if (direntry->d_inode) direntry->d_inode->i_nlink--; } } else if (rc == -EACCES) { @@ -496,7 +496,7 @@ int cifs_unlink(struct inode *inode, struct dentry *direntry) cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); if (!rc) { - if(direntry->d_inode) + if (direntry->d_inode) direntry->d_inode->i_nlink--; } else if (rc == -ETXTBSY) { int oplock = FALSE; @@ -517,14 +517,14 @@ int cifs_unlink(struct inode *inode, struct dentry *direntry) cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); CIFSSMBClose(xid, pTcon, netfid); - if(direntry->d_inode) + if (direntry->d_inode) direntry->d_inode->i_nlink--; } /* BB if rc = -ETXTBUSY goto the rename logic BB */ } } } - if(direntry->d_inode) { + if (direntry->d_inode) { cifsInode = CIFS_I(direntry->d_inode); cifsInode->time = 0; /* will force revalidate to get info when needed */ @@ -582,7 +582,7 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode) if (direntry->d_inode) direntry->d_inode->i_nlink = 2; if (cifs_sb->tcon->ses->capabilities & CAP_UNIX) - if(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) { + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) { CIFSSMBUnixSetPerms(xid, pTcon, full_path, mode, (__u64)current->euid, From ff89bf3bc0534aa03b5375aa906544d96911bad4 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Fri, 3 Jun 2005 05:25:00 -0700 Subject: [PATCH 004/160] [IA64] fix setting of sn_hub_info->shub_1_1_found Fix a bug in which shub_1_1_found is not being properly initialized or set, resulting in the improper setting of sn_hub_info->shub_1_1_found. Signed-off-by: Dean Nelson Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index e64cb8175f7a..44bfc7f318cb 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -222,7 +222,7 @@ void __init early_sn_setup(void) extern int platform_intr_list[]; extern nasid_t master_nasid; -static int shub_1_1_found __initdata; +static int __initdata shub_1_1_found = 0; /* * sn_check_for_wars @@ -251,7 +251,7 @@ static void __init sn_check_for_wars(void) } else { for_each_online_node(cnode) { if (is_shub_1_1(cnodeid_to_nasid(cnode))) - sn_hub_info->shub_1_1_found = 1; + shub_1_1_found = 1; } } } From 4ab5c01c7cc28f29d5cf5f2a591cb6f7bbece48e Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 3 Jun 2005 20:52:25 +0100 Subject: [PATCH 005/160] [PATCH] ARM: 2692/1: Fix compile warnings in include/asm-arm/arch-ixp2000/io.h Patch from Deepak Saxena This patch fixes the following warnings: include/asm/arch/io.h: In function `insw': include/asm/arch/io.h:78: warning: comparison of distinct pointer types lacks acast include/asm/arch/io.h:79: warning: comparison of distinct pointer types lacks acast include/asm/arch/io.h: In function `outsw': include/asm/arch/io.h:103: warning: comparison of distinct pointer types lacks a cast include/asm/arch/io.h:104: warning: comparison of distinct pointer types lacks a cast include/asm/arch/io.h: In function `inw': include/asm/arch/io.h:127: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- include/asm-arm/arch-ixp2000/io.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h index a8e3c2daefd6..083462668e18 100644 --- a/include/asm-arm/arch-ixp2000/io.h +++ b/include/asm-arm/arch-ixp2000/io.h @@ -75,8 +75,8 @@ static inline void insw(u32 ptr, void *buf, int length) * Is this cycle meant for the CS8900? */ if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && - ((port >= IXDP2X01_CS8900_VIRT_BASE) && - (port <= IXDP2X01_CS8900_VIRT_END))) { + (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) && + ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) { u8 *buf8 = (u8*)buf; register u32 tmp32; @@ -100,8 +100,8 @@ static inline void outsw(u32 ptr, void *buf, int length) * Is this cycle meant for the CS8900? */ if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && - ((port >= IXDP2X01_CS8900_VIRT_BASE) && - (port <= IXDP2X01_CS8900_VIRT_END))) { + (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) && + ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) { register u32 tmp32; u8 *buf8 = (u8*)buf; do { @@ -124,8 +124,8 @@ static inline u16 inw(u32 ptr) * Is this cycle meant for the CS8900? */ if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && - ((port >= IXDP2X01_CS8900_VIRT_BASE) && - (port <= IXDP2X01_CS8900_VIRT_END))) { + (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) && + ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) { return (u16)(*port); } @@ -137,8 +137,8 @@ static inline void outw(u16 value, u32 ptr) register volatile u32 *port = (volatile u32 *)ptr; if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && - ((port >= IXDP2X01_CS8900_VIRT_BASE) && - (port <= IXDP2X01_CS8900_VIRT_END))) { + (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) && + ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) { *port = value; return; } From 105bb2698b54a838165947199f1c8be5c2e7d9bb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Albrecht=20Dre=DF?= Date: Fri, 3 Jun 2005 20:52:26 +0100 Subject: [PATCH 006/160] [PATCH] ARM: 2694/1: [s3c2410/dma] release irq properly to fix kernel oops MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Patch from Albrecht Dreß Problem: When a module requests a DMA channel via the function s3c2410_dma_request(), this function requests the appropriate irq under the name of the client module. When the client module is unloaded, it calls s3c2410_dma_free() which does not free the irq. Consequently, when e.g. running "cat /proc/interrupts", the irq owner points to freed memory, leading to a kernel oops. File: linux/arch/arm/mach-s3c2410/dma.c Fix: trivial, below Signed-off-by: Albrecht Dreß Signed-off-by: Russell King --- arch/arm/mach-s3c2410/dma.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index bc229fab86d4..c7c28890d406 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -785,6 +785,10 @@ int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *client) chan->client = NULL; chan->in_use = 0; + if (chan->irq_claimed) + free_irq(chan->irq, (void *)chan); + chan->irq_claimed = 0; + local_irq_restore(flags); return 0; From 718a30a5cf0a9142f716a49853bd4b4a25a8da1b Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 3 Jun 2005 20:52:26 +0100 Subject: [PATCH 007/160] [PATCH] ARM: 2696/1: remove ';' in ELF_DATA define in asm-arm{,26}/elf.h Patch from Mike Frysinger the ELF_DATA define in both arm asm subdirs of linux/include/ contain a semicolon at the end. this of course will cause any code that tries to use ELF_DATA in assignment or comparison to fail. no other arch has a semicolon in their ELF_DATA defines. Signed-off-by: Mike Frysinger Signed-off-by: Russell King --- include/asm-arm/elf.h | 4 ++-- include/asm-arm26/elf.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/include/asm-arm/elf.h b/include/asm-arm/elf.h index cbceacbe5afa..a1696ba238d3 100644 --- a/include/asm-arm/elf.h +++ b/include/asm-arm/elf.h @@ -38,9 +38,9 @@ typedef struct user_fp elf_fpregset_t; */ #define ELF_CLASS ELFCLASS32 #ifdef __ARMEB__ -#define ELF_DATA ELFDATA2MSB; +#define ELF_DATA ELFDATA2MSB #else -#define ELF_DATA ELFDATA2LSB; +#define ELF_DATA ELFDATA2LSB #endif #define ELF_ARCH EM_ARM diff --git a/include/asm-arm26/elf.h b/include/asm-arm26/elf.h index 8b149474db24..5a47fdb3015d 100644 --- a/include/asm-arm26/elf.h +++ b/include/asm-arm26/elf.h @@ -36,7 +36,7 @@ typedef struct { void *null; } elf_fpregset_t; * These are used to set parameters in the core dumps. */ #define ELF_CLASS ELFCLASS32 -#define ELF_DATA ELFDATA2LSB; +#define ELF_DATA ELFDATA2LSB #define ELF_ARCH EM_ARM #define USE_ELF_CORE_DUMP From 8775420d2fbcfff866995471ea5f6130d14d121c Mon Sep 17 00:00:00 2001 From: Todd Poynor Date: Fri, 3 Jun 2005 20:52:27 +0100 Subject: [PATCH 008/160] [PATCH] ARM: 2691/1: PXA27x sleep fixes take 2 Patch from Todd Poynor PXA27x sleep fixes: * set additional sleep/wakeup registers for Mainstone boards. * move CKEN=0 to pxa25x-specific code; that value is harmful on pxa27x. * save/restore additional registers, including some found necessary for C5 processors and/or newer blob versions. * enable future support of additional sleep modes for PXA27x (eg, standby, deep sleep). * split off cpu-specific sleep processing between pxa27x and pxa25x into separate files (partly in preparation for additional sleep modes). Includes fixes from David Burrage. Signed-off-by: Todd Poynor Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mach-pxa/mainstone.c | 9 +++++++++ arch/arm/mach-pxa/pm.c | 32 ++++++++++++++++++-------------- arch/arm/mach-pxa/pxa25x.c | 29 +++++++++++++++++++++++++++++ arch/arm/mach-pxa/pxa27x.c | 32 ++++++++++++++++++++++++++++++++ 4 files changed, 88 insertions(+), 14 deletions(-) diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 3f952237ae3d..6823ae28ae6a 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -304,6 +304,15 @@ static void __init mainstone_map_io(void) PWER = 0xC0000002; PRER = 0x00000002; PFER = 0x00000002; + /* for use I SRAM as framebuffer. */ + PSLR |= 0xF04; + PCFR = 0x66; + /* For Keypad wakeup. */ + KPC &=~KPC_ASACT; + KPC |=KPC_AS; + PKWR = 0x000FD000; + /* Need read PKWR back after set it. */ + PKWR; } MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 82a4bf34c251..9799fe80df23 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -29,9 +29,6 @@ */ #undef DEBUG -extern void pxa_cpu_suspend(void); -extern void pxa_cpu_resume(void); - #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x #define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] @@ -63,6 +60,12 @@ enum { SLEEP_SAVE_START = 0, SLEEP_SAVE_ICMR, SLEEP_SAVE_CKEN, +#ifdef CONFIG_PXA27x + SLEEP_SAVE_MDREFR, + SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER, + SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR, +#endif + SLEEP_SAVE_CKSUM, SLEEP_SAVE_SIZE @@ -75,9 +78,7 @@ static int pxa_pm_enter(suspend_state_t state) unsigned long checksum = 0; struct timespec delta, rtc; int i; - - if (state != PM_SUSPEND_MEM) - return -EINVAL; + extern void pxa_cpu_pm_enter(suspend_state_t state); #ifdef CONFIG_IWMMXT /* force any iWMMXt context to ram **/ @@ -100,16 +101,17 @@ static int pxa_pm_enter(suspend_state_t state) SAVE(GAFR2_L); SAVE(GAFR2_U); #ifdef CONFIG_PXA27x + SAVE(MDREFR); SAVE(GPLR3); SAVE(GPDR3); SAVE(GRER3); SAVE(GFER3); SAVE(PGSR3); SAVE(GAFR3_L); SAVE(GAFR3_U); + SAVE(PWER); SAVE(PCFR); SAVE(PRER); + SAVE(PFER); SAVE(PKWR); #endif SAVE(ICMR); ICMR = 0; SAVE(CKEN); - CKEN = 0; - SAVE(PSTR); /* Note: wake up source are set up in each machine specific files */ @@ -123,16 +125,13 @@ static int pxa_pm_enter(suspend_state_t state) /* Clear sleep reset status */ RCSR = RCSR_SMR; - /* set resume return address */ - PSPR = virt_to_phys(pxa_cpu_resume); - /* before sleeping, calculate and save a checksum */ for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++) checksum += sleep_save[i]; sleep_save[SLEEP_SAVE_CKSUM] = checksum; /* *** go zzz *** */ - pxa_cpu_suspend(); + pxa_cpu_pm_enter(state); /* after sleeping, validate the checksum */ checksum = 0; @@ -145,7 +144,7 @@ static int pxa_pm_enter(suspend_state_t state) LUB_HEXLED = 0xbadbadc5; #endif while (1) - pxa_cpu_suspend(); + pxa_cpu_pm_enter(state); } /* ensure not to come back here if it wasn't intended */ @@ -162,8 +161,11 @@ static int pxa_pm_enter(suspend_state_t state) RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); #ifdef CONFIG_PXA27x + RESTORE(MDREFR); RESTORE(GAFR3_L); RESTORE(GAFR3_U); RESTORE_GPLEVEL(3); RESTORE(GPDR3); RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3); + RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER); + RESTORE(PFER); RESTORE(PKWR); #endif PSSR = PSSR_RDH | PSSR_PH; @@ -197,7 +199,9 @@ unsigned long sleep_phys_sp(void *sp) */ static int pxa_pm_prepare(suspend_state_t state) { - return 0; + extern int pxa_cpu_pm_prepare(suspend_state_t state); + + return pxa_cpu_pm_prepare(state); } /* diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index e887b7175ef3..b6d945a6e774 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -102,3 +102,32 @@ unsigned int get_lcdclk_frequency_10khz(void) } EXPORT_SYMBOL(get_lcdclk_frequency_10khz); + + +int pxa_cpu_pm_prepare(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + break; + default: + return -EINVAL; + } + + return 0; +} + +void pxa_cpu_pm_enter(suspend_state_t state) +{ + extern void pxa_cpu_suspend(unsigned int); + extern void pxa_cpu_resume(void); + + CKEN = 0; + + switch (state) { + case PM_SUSPEND_MEM: + /* set resume return address */ + PSPR = virt_to_phys(pxa_cpu_resume); + pxa_cpu_suspend(3); + break; + } +} diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 7e863afefb53..aa3c3b2ab75e 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -120,6 +120,38 @@ EXPORT_SYMBOL(get_clk_frequency_khz); EXPORT_SYMBOL(get_memclk_frequency_10khz); EXPORT_SYMBOL(get_lcdclk_frequency_10khz); +int pxa_cpu_pm_prepare(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + return 0; + default: + return -EINVAL; + } +} + +void pxa_cpu_pm_enter(suspend_state_t state) +{ + extern void pxa_cpu_standby(void); + extern void pxa_cpu_suspend(unsigned int); + extern void pxa_cpu_resume(void); + + CKEN = CKEN22_MEMC | CKEN9_OSTIMER; + + /* ensure voltage-change sequencer not initiated, which hangs */ + PCFR &= ~PCFR_FVC; + + /* Clear edge-detect status register. */ + PEDR = 0xDF12FE1B; + + switch (state) { + case PM_SUSPEND_MEM: + /* set resume return address */ + PSPR = virt_to_phys(pxa_cpu_resume); + pxa_cpu_suspend(3); + break; + } +} /* * device registration specific to PXA27x. From 17d82fcc6a15887b7138d35802ab8fc5f249794f Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 3 Jun 2005 22:18:52 +0100 Subject: [PATCH 009/160] [PATCH] ARM: 2700/1: Disable IXP2000 IRQs at bootup Patch from Deepak Saxena The IXDP2800 bootloader does not disable IRQs before jumping into the kernel and this is causing the Grand Unified KGDB to crash the system when we do an early call to trap_init() and irq handlers have not yet been registered. This patch disables IRQs before we jump into the kernel. Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/boot/compressed/head-xscale.S | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S index 665bd2c20743..d3fe2533907e 100644 --- a/arch/arm/boot/compressed/head-xscale.S +++ b/arch/arm/boot/compressed/head-xscale.S @@ -47,3 +47,10 @@ __XScale_start: orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) #endif +#ifdef CONFIG_ARCH_IXP2000 + mov r1, #-1 + mov r0, #0xd6000000 + str r1, [r0, #0x14] + str r1, [r0, #0x18] +#endif + From 854715be73b221596c7127d4042e1120d4539e19 Mon Sep 17 00:00:00 2001 From: Qu Fuping Date: Sat, 4 Jun 2005 15:43:29 -0700 Subject: [PATCH 010/160] [PATCH] mpage_end_io_write() I/O error handling fix When fsync() runs wait_on_page_writeback_range() it only inspects pages which are actually under I/O (PAGECACHE_TAG_WRITEBACK). If a page completed I/O prior to wait_on_page_writeback_range() looking at it, it is supposed to have recorded its I/O error state in the address_space. But mpage_mpage_end_io_write() forgot to set the address_space error flag in this case. Signed-off-by: Qu Fuping Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/mpage.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/mpage.c b/fs/mpage.c index b92c0e64aefa..bb9aebe93862 100644 --- a/fs/mpage.c +++ b/fs/mpage.c @@ -79,8 +79,11 @@ static int mpage_end_io_write(struct bio *bio, unsigned int bytes_done, int err) if (--bvec >= bio->bi_io_vec) prefetchw(&bvec->bv_page->flags); - if (!uptodate) + if (!uptodate){ SetPageError(page); + if (page->mapping) + set_bit(AS_EIO, &page->mapping->flags); + } end_page_writeback(page); } while (bvec >= bio->bi_io_vec); bio_put(bio); From 778959db97c7ed8eed4025916916b17a4629ce3d Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Sat, 4 Jun 2005 15:43:30 -0700 Subject: [PATCH 011/160] [PATCH] s390: ptrace peek and poke The special cases of peek and poke on acrs[15] and the fpc register are not handled correctly. A poke on acrs[15] will clobber the 4 bytes after the access registers in the thread_info structure. That happens to be the kernel stack pointer. A poke on the fpc with an invalid value is not caught by the validity check. On the next context switch the broken fpc value will cause a program check in the kernel. Improving the checks in peek and poke fixes this. Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/kernel/ptrace.c | 48 +++++++++++++++++++++++++++++++++++---- 1 file changed, 43 insertions(+), 5 deletions(-) diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 26889366929a..329d9391c83d 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -40,6 +40,7 @@ #include #include #include +#include #ifdef CONFIG_S390_SUPPORT #include "compat_ptrace.h" @@ -130,13 +131,19 @@ static int peek_user(struct task_struct *child, addr_t addr, addr_t data) { struct user *dummy = NULL; - addr_t offset, tmp; + addr_t offset, tmp, mask; /* * Stupid gdb peeks/pokes the access registers in 64 bit with * an alignment of 4. Programmers from hell... */ - if ((addr & 3) || addr > sizeof(struct user) - __ADDR_MASK) + mask = __ADDR_MASK; +#ifdef CONFIG_ARCH_S390X + if (addr >= (addr_t) &dummy->regs.acrs && + addr < (addr_t) &dummy->regs.orig_gpr2) + mask = 3; +#endif + if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK) return -EIO; if (addr < (addr_t) &dummy->regs.acrs) { @@ -153,6 +160,16 @@ peek_user(struct task_struct *child, addr_t addr, addr_t data) * access registers are stored in the thread structure */ offset = addr - (addr_t) &dummy->regs.acrs; +#ifdef CONFIG_ARCH_S390X + /* + * Very special case: old & broken 64 bit gdb reading + * from acrs[15]. Result is a 64 bit value. Read the + * 32 bit acrs[15] value and shift it by 32. Sick... + */ + if (addr == (addr_t) &dummy->regs.acrs[15]) + tmp = ((unsigned long) child->thread.acrs[15]) << 32; + else +#endif tmp = *(addr_t *)((addr_t) &child->thread.acrs + offset); } else if (addr == (addr_t) &dummy->regs.orig_gpr2) { @@ -167,6 +184,9 @@ peek_user(struct task_struct *child, addr_t addr, addr_t data) */ offset = addr - (addr_t) &dummy->regs.fp_regs; tmp = *(addr_t *)((addr_t) &child->thread.fp_regs + offset); + if (addr == (addr_t) &dummy->regs.fp_regs.fpc) + tmp &= (unsigned long) FPC_VALID_MASK + << (BITS_PER_LONG - 32); } else if (addr < (addr_t) (&dummy->regs.per_info + 1)) { /* @@ -191,13 +211,19 @@ static int poke_user(struct task_struct *child, addr_t addr, addr_t data) { struct user *dummy = NULL; - addr_t offset; + addr_t offset, mask; /* * Stupid gdb peeks/pokes the access registers in 64 bit with * an alignment of 4. Programmers from hell indeed... */ - if ((addr & 3) || addr > sizeof(struct user) - __ADDR_MASK) + mask = __ADDR_MASK; +#ifdef CONFIG_ARCH_S390X + if (addr >= (addr_t) &dummy->regs.acrs && + addr < (addr_t) &dummy->regs.orig_gpr2) + mask = 3; +#endif + if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK) return -EIO; if (addr < (addr_t) &dummy->regs.acrs) { @@ -224,6 +250,17 @@ poke_user(struct task_struct *child, addr_t addr, addr_t data) * access registers are stored in the thread structure */ offset = addr - (addr_t) &dummy->regs.acrs; +#ifdef CONFIG_ARCH_S390X + /* + * Very special case: old & broken 64 bit gdb writing + * to acrs[15] with a 64 bit value. Ignore the lower + * half of the value and write the upper 32 bit to + * acrs[15]. Sick... + */ + if (addr == (addr_t) &dummy->regs.acrs[15]) + child->thread.acrs[15] = (unsigned int) (data >> 32); + else +#endif *(addr_t *)((addr_t) &child->thread.acrs + offset) = data; } else if (addr == (addr_t) &dummy->regs.orig_gpr2) { @@ -237,7 +274,8 @@ poke_user(struct task_struct *child, addr_t addr, addr_t data) * floating point regs. are stored in the thread structure */ if (addr == (addr_t) &dummy->regs.fp_regs.fpc && - (data & ~FPC_VALID_MASK) != 0) + (data & ~((unsigned long) FPC_VALID_MASK + << (BITS_PER_LONG - 32))) != 0) return -EINVAL; offset = addr - (addr_t) &dummy->regs.fp_regs; *(addr_t *)((addr_t) &child->thread.fp_regs + offset) = data; From c5c3a6d8fe923b8780b9cd10e72344b8cf8518b5 Mon Sep 17 00:00:00 2001 From: Bodo Stroesser Date: Sat, 4 Jun 2005 15:43:32 -0700 Subject: [PATCH 012/160] [PATCH] s390: uml ptrace fixes To make UML build and run on s390, I needed to do these two little changes: 1) UML includes some of the subarch's (s390) headers. I had to change one of them with the following one-liner, to make this compile. AFAICS, this change doesn't break compilation of s390 itself. 2) UML needs to intercept syscalls via ptrace to invalidate the syscall, read syscall's parameters and write the result with the result of UML's syscall processing. Also, UML needs to make sure, that the host does no syscall restart processing. On i386 for example, this can be done by writing -1 to orig_eax on the 2nd syscall interception (orig_eax is the syscall number, which after the interception is used as a "interrupt was a syscall" flag only. Unfortunately, s390 holds syscall number and syscall result in gpr2 and its "interrupt was a syscall" flag (trap) is unreachable via ptrace. So I changed the host to set trap to -1, if the syscall number is changed to an invalid value on the first syscall interception. Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/kernel/ptrace.c | 7 +++++++ include/asm-s390/user.h | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 329d9391c83d..06afa3103ace 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -760,6 +760,13 @@ syscall_trace(struct pt_regs *regs, int entryexit) ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0)); + /* + * If the debuffer has set an invalid system call number, + * we prepare to skip the system call restart handling. + */ + if (!entryexit && regs->gprs[2] >= NR_syscalls) + regs->trap = -1; + /* * this isn't the same as continuing with a signal, but it will do * for normal use. strace only continues with a signal if the diff --git a/include/asm-s390/user.h b/include/asm-s390/user.h index c64f8c181df3..1dc74baf03c4 100644 --- a/include/asm-s390/user.h +++ b/include/asm-s390/user.h @@ -10,7 +10,7 @@ #define _S390_USER_H #include -#include +#include /* Core file format: The core file is written in such a way that gdb can understand it and provide useful information to the user (under linux we use the 'trad-core' bfd). There are quite a number of From 595bf2aacae96d0f87352a1ff5476b79e52e212f Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Sat, 4 Jun 2005 15:43:32 -0700 Subject: [PATCH 013/160] [PATCH] s390: in_interrupt vs. in_atomic The condition for no context in do_exception checks for hard and soft interrupts by using in_interrupt() but not for preemption. This is bad for the users of __copy_from/to_user_inatomic because the fault handler might call schedule although the preemption count is != 0. Use in_atomic() instead in_interrupt(). Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/mm/fault.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 80306bc8c799..75fde949d125 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -207,7 +207,7 @@ do_exception(struct pt_regs *regs, unsigned long error_code, int is_protection) * we are not in an interrupt and that there is a * user context. */ - if (user_address == 0 || in_interrupt() || !mm) + if (user_address == 0 || in_atomic() || !mm) goto no_context; /* From f26d583e41aedad8159acf9533fa287d7209dfbf Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Sat, 4 Jun 2005 15:43:33 -0700 Subject: [PATCH 014/160] [PATCH] s390: deadlock in appldata The system might hang when using appldata_mem with high I/O traffic and a large number of devices. The spinlocks bdev_lock and swaplock are acquired via calls to si_meminfo() and si_swapinfo() from a tasklet, i.e. interrupt context, which can lead to a deadlock. Replace tasklet with work queue. Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/appldata/appldata_base.c | 72 +++++++++++++++------------ arch/s390/appldata/appldata_mem.c | 2 +- arch/s390/appldata/appldata_net_sum.c | 2 +- arch/s390/appldata/appldata_os.c | 4 +- 4 files changed, 45 insertions(+), 35 deletions(-) diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index 01ae1964c938..c067435bae45 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -28,6 +28,7 @@ //#include #include #include +#include #include "appldata.h" @@ -133,9 +134,12 @@ static int appldata_interval = APPLDATA_CPU_INTERVAL; static int appldata_timer_active; /* - * Tasklet + * Work queue */ -static struct tasklet_struct appldata_tasklet_struct; +static struct workqueue_struct *appldata_wq; +static void appldata_work_fn(void *data); +static DECLARE_WORK(appldata_work, appldata_work_fn, NULL); + /* * Ops list @@ -144,11 +148,11 @@ static DEFINE_SPINLOCK(appldata_ops_lock); static LIST_HEAD(appldata_ops_list); -/************************* timer, tasklet, DIAG ******************************/ +/*************************** timer, work, DIAG *******************************/ /* * appldata_timer_function() * - * schedule tasklet and reschedule timer + * schedule work and reschedule timer */ static void appldata_timer_function(unsigned long data, struct pt_regs *regs) { @@ -157,22 +161,22 @@ static void appldata_timer_function(unsigned long data, struct pt_regs *regs) atomic_read(&appldata_expire_count)); if (atomic_dec_and_test(&appldata_expire_count)) { atomic_set(&appldata_expire_count, num_online_cpus()); - tasklet_schedule((struct tasklet_struct *) data); + queue_work(appldata_wq, (struct work_struct *) data); } } /* - * appldata_tasklet_function() + * appldata_work_fn() * * call data gathering function for each (active) module */ -static void appldata_tasklet_function(unsigned long data) +static void appldata_work_fn(void *data) { struct list_head *lh; struct appldata_ops *ops; int i; - P_DEBUG(" -= Tasklet =-\n"); + P_DEBUG(" -= Work Queue =-\n"); i = 0; spin_lock(&appldata_ops_lock); list_for_each(lh, &appldata_ops_list) { @@ -231,7 +235,7 @@ static int appldata_diag(char record_nr, u16 function, unsigned long buffer, : "=d" (ry) : "d" (&(appldata_parameter_list)) : "cc"); return (int) ry; } -/********************** timer, tasklet, DIAG ***************************/ +/************************ timer, work, DIAG ****************************/ /****************************** /proc stuff **********************************/ @@ -411,7 +415,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, struct list_head *lh; found = 0; - spin_lock_bh(&appldata_ops_lock); + spin_lock(&appldata_ops_lock); list_for_each(lh, &appldata_ops_list) { tmp_ops = list_entry(lh, struct appldata_ops, list); if (&tmp_ops->ctl_table[2] == ctl) { @@ -419,15 +423,15 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, } } if (!found) { - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); return -ENODEV; } ops = ctl->data; if (!try_module_get(ops->owner)) { // protect this function - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); return -ENODEV; } - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); if (!*lenp || *ppos) { *lenp = 0; @@ -451,10 +455,11 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, return -EFAULT; } - spin_lock_bh(&appldata_ops_lock); + spin_lock(&appldata_ops_lock); if ((buf[0] == '1') && (ops->active == 0)) { - if (!try_module_get(ops->owner)) { // protect tasklet - spin_unlock_bh(&appldata_ops_lock); + // protect work queue callback + if (!try_module_get(ops->owner)) { + spin_unlock(&appldata_ops_lock); module_put(ops->owner); return -ENODEV; } @@ -485,7 +490,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, } module_put(ops->owner); } - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); out: *lenp = len; *ppos += len; @@ -529,7 +534,7 @@ int appldata_register_ops(struct appldata_ops *ops) } memset(ops->ctl_table, 0, 4*sizeof(struct ctl_table)); - spin_lock_bh(&appldata_ops_lock); + spin_lock(&appldata_ops_lock); list_for_each(lh, &appldata_ops_list) { tmp_ops = list_entry(lh, struct appldata_ops, list); P_DEBUG("register_ops loop: %i) name = %s, ctl = %i\n", @@ -541,18 +546,18 @@ int appldata_register_ops(struct appldata_ops *ops) APPLDATA_PROC_NAME_LENGTH) == 0) { P_ERROR("Name \"%s\" already registered!\n", ops->name); kfree(ops->ctl_table); - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); return -EBUSY; } if (tmp_ops->ctl_nr == ops->ctl_nr) { P_ERROR("ctl_nr %i already registered!\n", ops->ctl_nr); kfree(ops->ctl_table); - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); return -EBUSY; } } list_add(&ops->list, &appldata_ops_list); - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); ops->ctl_table[0].ctl_name = CTL_APPLDATA; ops->ctl_table[0].procname = appldata_proc_name; @@ -583,12 +588,12 @@ int appldata_register_ops(struct appldata_ops *ops) */ void appldata_unregister_ops(struct appldata_ops *ops) { - spin_lock_bh(&appldata_ops_lock); + spin_lock(&appldata_ops_lock); unregister_sysctl_table(ops->sysctl_header); list_del(&ops->list); kfree(ops->ctl_table); ops->ctl_table = NULL; - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); P_INFO("%s-ops unregistered!\n", ops->name); } /********************** module-ops management **************************/ @@ -602,7 +607,7 @@ appldata_online_cpu(int cpu) init_virt_timer(&per_cpu(appldata_timer, cpu)); per_cpu(appldata_timer, cpu).function = appldata_timer_function; per_cpu(appldata_timer, cpu).data = (unsigned long) - &appldata_tasklet_struct; + &appldata_work; atomic_inc(&appldata_expire_count); spin_lock(&appldata_timer_lock); __appldata_vtimer_setup(APPLDATA_MOD_TIMER); @@ -615,7 +620,7 @@ appldata_offline_cpu(int cpu) del_virt_timer(&per_cpu(appldata_timer, cpu)); if (atomic_dec_and_test(&appldata_expire_count)) { atomic_set(&appldata_expire_count, num_online_cpus()); - tasklet_schedule(&appldata_tasklet_struct); + queue_work(appldata_wq, &appldata_work); } spin_lock(&appldata_timer_lock); __appldata_vtimer_setup(APPLDATA_MOD_TIMER); @@ -648,7 +653,7 @@ static struct notifier_block __devinitdata appldata_nb = { /* * appldata_init() * - * init timer and tasklet, register /proc entries + * init timer, register /proc entries */ static int __init appldata_init(void) { @@ -657,6 +662,12 @@ static int __init appldata_init(void) P_DEBUG("sizeof(parameter_list) = %lu\n", sizeof(struct appldata_parameter_list)); + appldata_wq = create_singlethread_workqueue("appldata"); + if (!appldata_wq) { + P_ERROR("Could not create work queue\n"); + return -ENOMEM; + } + for_each_online_cpu(i) appldata_online_cpu(i); @@ -670,7 +681,6 @@ static int __init appldata_init(void) appldata_table[1].de->owner = THIS_MODULE; #endif - tasklet_init(&appldata_tasklet_struct, appldata_tasklet_function, 0); P_DEBUG("Base interface initialized.\n"); return 0; } @@ -678,7 +688,7 @@ static int __init appldata_init(void) /* * appldata_exit() * - * stop timer and tasklet, unregister /proc entries + * stop timer, unregister /proc entries */ static void __exit appldata_exit(void) { @@ -690,7 +700,7 @@ static void __exit appldata_exit(void) /* * ops list should be empty, but just in case something went wrong... */ - spin_lock_bh(&appldata_ops_lock); + spin_lock(&appldata_ops_lock); list_for_each(lh, &appldata_ops_list) { ops = list_entry(lh, struct appldata_ops, list); rc = appldata_diag(ops->record_nr, APPLDATA_STOP_REC, @@ -700,7 +710,7 @@ static void __exit appldata_exit(void) "return code: %d\n", ops->name, rc); } } - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); for_each_online_cpu(i) appldata_offline_cpu(i); @@ -709,7 +719,7 @@ static void __exit appldata_exit(void) unregister_sysctl_table(appldata_sysctl_header); - tasklet_kill(&appldata_tasklet_struct); + destroy_workqueue(appldata_wq); P_DEBUG("... module unloaded!\n"); } /**************************** init / exit ******************************/ diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c index 462ee9a84e76..f0e2fbed3d4c 100644 --- a/arch/s390/appldata/appldata_mem.c +++ b/arch/s390/appldata/appldata_mem.c @@ -68,7 +68,7 @@ struct appldata_mem_data { u64 pgmajfault; /* page faults (major only) */ // <-- New in 2.6 -} appldata_mem_data; +} __attribute__((packed)) appldata_mem_data; static inline void appldata_debug_print(struct appldata_mem_data *mem_data) diff --git a/arch/s390/appldata/appldata_net_sum.c b/arch/s390/appldata/appldata_net_sum.c index dd61638d3027..2a4c7432db4a 100644 --- a/arch/s390/appldata/appldata_net_sum.c +++ b/arch/s390/appldata/appldata_net_sum.c @@ -57,7 +57,7 @@ struct appldata_net_sum_data { u64 rx_dropped; /* no space in linux buffers */ u64 tx_dropped; /* no space available in linux */ u64 collisions; /* collisions while transmitting */ -} appldata_net_sum_data; +} __attribute__((packed)) appldata_net_sum_data; static inline void appldata_print_debug(struct appldata_net_sum_data *net_data) diff --git a/arch/s390/appldata/appldata_os.c b/arch/s390/appldata/appldata_os.c index b83f07484551..e0a476bf4fd6 100644 --- a/arch/s390/appldata/appldata_os.c +++ b/arch/s390/appldata/appldata_os.c @@ -49,7 +49,7 @@ struct appldata_os_per_cpu { u32 per_cpu_softirq; /* ... spent in softirqs */ u32 per_cpu_iowait; /* ... spent while waiting for I/O */ // <-- New in 2.6 -}; +} __attribute__((packed)); struct appldata_os_data { u64 timestamp; @@ -75,7 +75,7 @@ struct appldata_os_data { /* per cpu data */ struct appldata_os_per_cpu os_cpu[0]; -}; +} __attribute__((packed)); static struct appldata_os_data *appldata_os_data; From eae936e21bd726f9d9555f2262d439fbcd61dccf Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sat, 4 Jun 2005 15:43:34 -0700 Subject: [PATCH 015/160] [PATCH] serial: update NEC VR4100 series serial support - Changed the return value of unknown type to NULL. - Deleted the NULL check of dev_id in siu_interrupt(). - Deleted the NULL check of port->membase in siu_shutdown(). - Added the NULL check of port->membase to siu_startup(). - Removed early_uart_ops. Now using vr41xx_siu standerd one. - Changed KSEG1ADDR() in siu_console_setup() to ioremap(). - When uart_add_one_port() failed, changed to set NULL to port->dev. Signed-off-by: Yoichi Yuasa Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/vr41xx_siu.c | 66 +++++-------------------------------- 1 file changed, 9 insertions(+), 57 deletions(-) diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c index 5d2ceb623e6f..1f985327b0d4 100644 --- a/drivers/serial/vr41xx_siu.c +++ b/drivers/serial/vr41xx_siu.c @@ -234,7 +234,7 @@ static inline const char *siu_type_name(struct uart_port *port) return "DSIU"; } - return "unknown"; + return NULL; } static unsigned int siu_tx_empty(struct uart_port *port) @@ -482,9 +482,6 @@ static irqreturn_t siu_interrupt(int irq, void *dev_id, struct pt_regs *regs) struct uart_port *port; uint8_t iir, lsr; - if (dev_id == NULL) - return IRQ_NONE; - port = (struct uart_port *)dev_id; iir = siu_read(port, UART_IIR); @@ -507,6 +504,9 @@ static int siu_startup(struct uart_port *port) { int retval; + if (port->membase == NULL) + return -ENODEV; + siu_clear_fifo(port); (void)siu_read(port, UART_LSR); @@ -545,9 +545,6 @@ static void siu_shutdown(struct uart_port *port) unsigned long flags; uint8_t lcr; - if (port->membase == NULL) - return; - siu_write(port, UART_IER, 0); spin_lock_irqsave(&port->lock, flags); @@ -802,53 +799,6 @@ static int siu_init_ports(void) #ifdef CONFIG_SERIAL_VR41XX_CONSOLE -static void early_set_termios(struct uart_port *port, struct termios *new, - struct termios *old) -{ - tcflag_t c_cflag; - uint8_t lcr; - unsigned int baud, quot; - - c_cflag = new->c_cflag; - switch (c_cflag & CSIZE) { - case CS5: - lcr = UART_LCR_WLEN5; - break; - case CS6: - lcr = UART_LCR_WLEN6; - break; - case CS7: - lcr = UART_LCR_WLEN7; - break; - default: - lcr = UART_LCR_WLEN8; - break; - } - - if (c_cflag & CSTOPB) - lcr |= UART_LCR_STOP; - if (c_cflag & PARENB) - lcr |= UART_LCR_PARITY; - if ((c_cflag & PARODD) != PARODD) - lcr |= UART_LCR_EPAR; - if (c_cflag & CMSPAR) - lcr |= UART_LCR_SPAR; - - baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - siu_write(port, UART_LCR, lcr | UART_LCR_DLAB); - - siu_write(port, UART_DLL, (uint8_t)quot); - siu_write(port, UART_DLM, (uint8_t)(quot >> 8)); - - siu_write(port, UART_LCR, lcr); -} - -static struct uart_ops early_uart_ops = { - .set_termios = early_set_termios, -}; - #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) static void wait_for_xmitr(struct uart_port *port) @@ -915,7 +865,7 @@ static int siu_console_setup(struct console *con, char *options) if (port->membase == NULL) { if (port->mapbase == 0) return -ENODEV; - port->membase = (unsigned char __iomem *)KSEG1ADDR(port->mapbase); + port->membase = ioremap(port->mapbase, siu_port_size(port)); } vr41xx_select_siu_interface(SIU_INTERFACE_RS232C); @@ -949,7 +899,7 @@ static int __devinit siu_console_init(void) for (i = 0; i < num; i++) { port = &siu_uart_ports[i]; - port->ops = &early_uart_ops; + port->ops = &siu_uart_ops; } register_console(&siu_console); @@ -994,8 +944,10 @@ static int siu_probe(struct device *dev) port->dev = dev; retval = uart_add_one_port(&siu_uart_driver, port); - if (retval) + if (retval < 0) { + port->dev = NULL; break; + } } if (i == 0 && retval < 0) { From 7cef5677ef3a8084f2588ce0a129dc95d65161f6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 6 Jun 2005 08:22:29 -0700 Subject: [PATCH 016/160] Linux 2.6.12-rc6 Getting ready for the real release.. --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index c11a317ea910..9e005e18c71c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 12 -EXTRAVERSION =-rc5 +EXTRAVERSION =-rc6 NAME=Woozy Numbat # *DOCUMENTATION* From a51171816826b074828fa96cb6ef60fc3b13631a Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 6 Jun 2005 13:35:54 -0700 Subject: [PATCH 017/160] [PATCH] broken fault_in_pages_readable call in generic_file_buffered_write() fault_in_pages_readable() is being passed an incorrect `end' address, which can result in writes accidentally faulting in pages which will not be affected by the write() call. Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/filemap.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/mm/filemap.c b/mm/filemap.c index 1d33fec7bac6..4a2fee2cb62b 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1968,6 +1968,7 @@ generic_file_buffered_write(struct kiocb *iocb, const struct iovec *iov, do { unsigned long index; unsigned long offset; + unsigned long maxlen; size_t copied; offset = (pos & (PAGE_CACHE_SIZE -1)); /* Within page */ @@ -1982,7 +1983,10 @@ generic_file_buffered_write(struct kiocb *iocb, const struct iovec *iov, * same page as we're writing to, without it being marked * up-to-date. */ - fault_in_pages_readable(buf, bytes); + maxlen = cur_iov->iov_len - iov_base; + if (maxlen > bytes) + maxlen = bytes; + fault_in_pages_readable(buf, maxlen); page = __grab_cache_page(mapping,index,&cached_page,&lru_pvec); if (!page) { @@ -2024,6 +2028,8 @@ generic_file_buffered_write(struct kiocb *iocb, const struct iovec *iov, filemap_set_next_iovec(&cur_iov, &iov_base, status); buf = cur_iov->iov_base + iov_base; + } else { + iov_base += status; } } } From 3399ba5b70eccc918ea4ab2630cac68f5c8ff845 Mon Sep 17 00:00:00 2001 From: Denis Vlasenko Date: Mon, 6 Jun 2005 13:35:55 -0700 Subject: [PATCH 018/160] [PATCH] moxa: do not ignore input Stop using tty internal structure in mxser_receive_chars(), use tty_insert_flip_char(tty, ch flag); instead. Without this change driver ignores any rx'ed chars. Run tested. Cc: Alan Cox Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/mxser.c | 38 +++++++++++++------------------------- 1 file changed, 13 insertions(+), 25 deletions(-) diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 7a245068e3e5..f022f0944434 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -1995,9 +1995,6 @@ static void mxser_receive_chars(struct mxser_struct *info, int *status) unsigned char ch, gdl; int ignored = 0; int cnt = 0; - unsigned char *cp; - char *fp; - int count; int recv_room; int max = 256; unsigned long flags; @@ -2011,10 +2008,6 @@ static void mxser_receive_chars(struct mxser_struct *info, int *status) //return; } - cp = tty->flip.char_buf; - fp = tty->flip.flag_buf; - count = 0; - // following add by Victor Yu. 09-02-2002 if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) { @@ -2041,12 +2034,10 @@ static void mxser_receive_chars(struct mxser_struct *info, int *status) } while (gdl--) { ch = inb(info->base + UART_RX); - count++; - *cp++ = ch; - *fp++ = 0; + tty_insert_flip_char(tty, ch, 0); cnt++; /* - if((count>=HI_WATER) && (info->stop_rx==0)){ + if((cnt>=HI_WATER) && (info->stop_rx==0)){ mxser_stoprx(tty); info->stop_rx=1; break; @@ -2061,7 +2052,7 @@ intr_old: if (max-- < 0) break; /* - if((count>=HI_WATER) && (info->stop_rx==0)){ + if((cnt>=HI_WATER) && (info->stop_rx==0)){ mxser_stoprx(tty); info->stop_rx=1; break; @@ -2078,36 +2069,33 @@ intr_old: if (++ignored > 100) break; } else { - count++; + char flag = 0; if (*status & UART_LSR_SPECIAL) { if (*status & UART_LSR_BI) { - *fp++ = TTY_BREAK; + flag = TTY_BREAK; /* added by casper 1/11/2000 */ info->icount.brk++; - /* */ if (info->flags & ASYNC_SAK) do_SAK(tty); } else if (*status & UART_LSR_PE) { - *fp++ = TTY_PARITY; + flag = TTY_PARITY; /* added by casper 1/11/2000 */ info->icount.parity++; /* */ } else if (*status & UART_LSR_FE) { - *fp++ = TTY_FRAME; + flag = TTY_FRAME; /* added by casper 1/11/2000 */ info->icount.frame++; /* */ } else if (*status & UART_LSR_OE) { - *fp++ = TTY_OVERRUN; + flag = TTY_OVERRUN; /* added by casper 1/11/2000 */ info->icount.overrun++; /* */ - } else - *fp++ = 0; - } else - *fp++ = 0; - *cp++ = ch; + } + } + tty_insert_flip_char(tty, ch, flag); cnt++; if (cnt >= recv_room) { if (!info->ldisc_stop_rx) { @@ -2132,13 +2120,13 @@ intr_old: // above add by Victor Yu. 09-02-2002 } while (*status & UART_LSR_DR); - end_intr: // add by Victor Yu. 09-02-2002 +end_intr: // add by Victor Yu. 09-02-2002 mxvar_log.rxcnt[info->port] += cnt; info->mon_data.rxcnt += cnt; info->mon_data.up_rxcnt += cnt; spin_unlock_irqrestore(&info->slock, flags); - + tty_flip_buffer_push(tty); } From 8e2894e51d6407e47226a60c0d19bf384642c55a Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Mon, 6 Jun 2005 13:35:56 -0700 Subject: [PATCH 019/160] [PATCH] h8300 build error fix h8300 was missing a few definitions. Signed-off-by: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-h8300/kmap_types.h | 6 ++++-- include/asm-h8300/mman.h | 3 +++ 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/include/asm-h8300/kmap_types.h b/include/asm-h8300/kmap_types.h index 82431edeb2a1..1ec8a3427120 100644 --- a/include/asm-h8300/kmap_types.h +++ b/include/asm-h8300/kmap_types.h @@ -1,5 +1,5 @@ -#ifndef _ASM_KMAP_TYPES_H -#define _ASM_KMAP_TYPES_H +#ifndef _ASM_H8300_KMAP_TYPES_H +#define _ASM_H8300_KMAP_TYPES_H enum km_type { KM_BOUNCE_READ, @@ -13,6 +13,8 @@ enum km_type { KM_PTE1, KM_IRQ0, KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, KM_TYPE_NR }; diff --git a/include/asm-h8300/mman.h b/include/asm-h8300/mman.h index abe08856c84f..63f727a59850 100644 --- a/include/asm-h8300/mman.h +++ b/include/asm-h8300/mman.h @@ -4,6 +4,7 @@ #define PROT_READ 0x1 /* page can be read */ #define PROT_WRITE 0x2 /* page can be written */ #define PROT_EXEC 0x4 /* page can be executed */ +#define PROT_SEM 0x8 /* page may be used for atomic ops */ #define PROT_NONE 0x0 /* page can not be accessed */ #define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ #define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ @@ -19,6 +20,8 @@ #define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ #define MAP_LOCKED 0x2000 /* pages are locked */ #define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ #define MS_ASYNC 1 /* sync memory asynchronously */ #define MS_INVALIDATE 2 /* invalidate the caches */ From 4481e8eea761857367162b0957277d5524fbea63 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 6 Jun 2005 13:35:57 -0700 Subject: [PATCH 020/160] [PATCH] ppc32: Fix incorrect CPU_FTR fixup usage for unified caches Runtime feature support for unified caches was testing a userland feature flag (PPC_FEATURE_UNIFIED_CACHE) instead of a cpu feature flag (CPU_FTR_SPLIT_ID_CACHE). Luckily the current defined bit mask for cpu features and userland features do not overlap so this only causes an issue on machines with a unified cache, which is extremely rare on PPC today. Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/kernel/misc.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index e4f1615ec13f..7329ef177a18 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -619,7 +619,7 @@ _GLOBAL(flush_instruction_cache) _GLOBAL(flush_icache_range) BEGIN_FTR_SECTION blr /* for 601, do nothing */ -END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE) +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) li r5,L1_CACHE_LINE_SIZE-1 andc r3,r3,r5 subf r4,r3,r4 @@ -736,7 +736,7 @@ _GLOBAL(flush_dcache_all) _GLOBAL(__flush_dcache_icache) BEGIN_FTR_SECTION blr /* for 601, do nothing */ -END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE) +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) rlwinm r3,r3,0,0,19 /* Get page base address */ li r4,4096/L1_CACHE_LINE_SIZE /* Number of lines in a page */ mtctr r4 @@ -764,7 +764,7 @@ END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE) _GLOBAL(__flush_dcache_icache_phys) BEGIN_FTR_SECTION blr /* for 601, do nothing */ -END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE) +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) mfmsr r10 rlwinm r0,r10,0,28,26 /* clear DR */ mtmsr r0 From 90ebe5654febe3555a2516d51d3d251226d35fdb Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:35:58 -0700 Subject: [PATCH 021/160] [PATCH] namei fixes OK, here comes a patch series that hopefully should close all too-early-mntput() races in fs/namei.c. Entire area is convoluted as hell, so I'm splitting that series into _very_ small chunks. Patches alread in the tree close only (very wide) races in following symlinks (see "busy inodes after umount" thread some time ago). Unfortunately, quite a few narrower races of the same nature were not closed. Hopefully this should take care of all of them. Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index dd78f01b6de8..abeec34e7553 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -493,6 +493,11 @@ fail: return PTR_ERR(link); } +struct path { + struct vfsmount *mnt; + struct dentry *dentry; +}; + static inline int __do_follow_link(struct dentry *dentry, struct nameidata *nd) { int error; @@ -518,7 +523,7 @@ static inline int __do_follow_link(struct dentry *dentry, struct nameidata *nd) * Without that kind of total limit, nasty chains of consecutive * symlinks can cause almost arbitrarily long lookups. */ -static inline int do_follow_link(struct dentry *dentry, struct nameidata *nd) +static inline int do_follow_link(struct path *path, struct nameidata *nd) { int err = -ELOOP; if (current->link_count >= MAX_NESTED_LINKS) @@ -527,13 +532,13 @@ static inline int do_follow_link(struct dentry *dentry, struct nameidata *nd) goto loop; BUG_ON(nd->depth >= MAX_NESTED_LINKS); cond_resched(); - err = security_inode_follow_link(dentry, nd); + err = security_inode_follow_link(path->dentry, nd); if (err) goto loop; current->link_count++; current->total_link_count++; nd->depth++; - err = __do_follow_link(dentry, nd); + err = __do_follow_link(path->dentry, nd); current->link_count--; nd->depth--; return err; @@ -641,11 +646,6 @@ static inline void follow_dotdot(struct vfsmount **mnt, struct dentry **dentry) follow_mount(mnt, dentry); } -struct path { - struct vfsmount *mnt; - struct dentry *dentry; -}; - /* * It's more convoluted than I'd like it to be, but... it's still fairly * small and for now I'd prefer to have fast path as straight as possible. @@ -784,7 +784,7 @@ static fastcall int __link_path_walk(const char * name, struct nameidata *nd) if (inode->i_op->follow_link) { mntget(next.mnt); - err = do_follow_link(next.dentry, nd); + err = do_follow_link(&next, nd); dput(next.dentry); mntput(next.mnt); if (err) @@ -838,7 +838,7 @@ last_component: if ((lookup_flags & LOOKUP_FOLLOW) && inode && inode->i_op && inode->i_op->follow_link) { mntget(next.mnt); - err = do_follow_link(next.dentry, nd); + err = do_follow_link(&next, nd); dput(next.dentry); mntput(next.mnt); if (err) From 5f92b3bcec0fa2e2d775b589850097f9dc6b2de2 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:35:59 -0700 Subject: [PATCH 022/160] [PATCH] namei fixes (2/19) All callers of do_follow_link() do mntget() right before it and dput()+mntput() right after. These calls are moved inside do_follow_link() now. Obviously equivalent transformation. Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index abeec34e7553..12d75ed214f6 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -526,6 +526,7 @@ static inline int __do_follow_link(struct dentry *dentry, struct nameidata *nd) static inline int do_follow_link(struct path *path, struct nameidata *nd) { int err = -ELOOP; + mntget(path->mnt); if (current->link_count >= MAX_NESTED_LINKS) goto loop; if (current->total_link_count >= 40) @@ -541,9 +542,13 @@ static inline int do_follow_link(struct path *path, struct nameidata *nd) err = __do_follow_link(path->dentry, nd); current->link_count--; nd->depth--; + dput(path->dentry); + mntput(path->mnt); return err; loop: path_release(nd); + dput(path->dentry); + mntput(path->mnt); return err; } @@ -783,10 +788,7 @@ static fastcall int __link_path_walk(const char * name, struct nameidata *nd) goto out_dput; if (inode->i_op->follow_link) { - mntget(next.mnt); err = do_follow_link(&next, nd); - dput(next.dentry); - mntput(next.mnt); if (err) goto return_err; err = -ENOENT; @@ -837,10 +839,7 @@ last_component: inode = next.dentry->d_inode; if ((lookup_flags & LOOKUP_FOLLOW) && inode && inode->i_op && inode->i_op->follow_link) { - mntget(next.mnt); err = do_follow_link(&next, nd); - dput(next.dentry); - mntput(next.mnt); if (err) goto return_err; inode = nd->dentry->d_inode; From 4e7506e4dd9e40c189fcbec95d5dbc92f2e5926a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:36:00 -0700 Subject: [PATCH 023/160] [PATCH] namei fixes (3/19) Replaced struct dentry *dentry in namei with struct path path. All uses of dentry replaced with path.dentry there. Obviously equivalent transformation. Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 12d75ed214f6..167f19b5e51a 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1397,7 +1397,7 @@ int may_open(struct nameidata *nd, int acc_mode, int flag) int open_namei(const char * pathname, int flag, int mode, struct nameidata *nd) { int acc_mode, error = 0; - struct dentry *dentry; + struct path path; struct dentry *dir; int count = 0; @@ -1441,23 +1441,23 @@ int open_namei(const char * pathname, int flag, int mode, struct nameidata *nd) dir = nd->dentry; nd->flags &= ~LOOKUP_PARENT; down(&dir->d_inode->i_sem); - dentry = __lookup_hash(&nd->last, nd->dentry, nd); + path.dentry = __lookup_hash(&nd->last, nd->dentry, nd); do_last: - error = PTR_ERR(dentry); - if (IS_ERR(dentry)) { + error = PTR_ERR(path.dentry); + if (IS_ERR(path.dentry)) { up(&dir->d_inode->i_sem); goto exit; } /* Negative dentry, just create the file */ - if (!dentry->d_inode) { + if (!path.dentry->d_inode) { if (!IS_POSIXACL(dir->d_inode)) mode &= ~current->fs->umask; - error = vfs_create(dir->d_inode, dentry, mode, nd); + error = vfs_create(dir->d_inode, path.dentry, mode, nd); up(&dir->d_inode->i_sem); dput(nd->dentry); - nd->dentry = dentry; + nd->dentry = path.dentry; if (error) goto exit; /* Don't check for write permission, don't truncate */ @@ -1475,22 +1475,22 @@ do_last: if (flag & O_EXCL) goto exit_dput; - if (d_mountpoint(dentry)) { + if (d_mountpoint(path.dentry)) { error = -ELOOP; if (flag & O_NOFOLLOW) goto exit_dput; - while (__follow_down(&nd->mnt,&dentry) && d_mountpoint(dentry)); + while (__follow_down(&nd->mnt,&path.dentry) && d_mountpoint(path.dentry)); } error = -ENOENT; - if (!dentry->d_inode) + if (!path.dentry->d_inode) goto exit_dput; - if (dentry->d_inode->i_op && dentry->d_inode->i_op->follow_link) + if (path.dentry->d_inode->i_op && path.dentry->d_inode->i_op->follow_link) goto do_link; dput(nd->dentry); - nd->dentry = dentry; + nd->dentry = path.dentry; error = -EISDIR; - if (dentry->d_inode && S_ISDIR(dentry->d_inode->i_mode)) + if (path.dentry->d_inode && S_ISDIR(path.dentry->d_inode->i_mode)) goto exit; ok: error = may_open(nd, acc_mode, flag); @@ -1499,7 +1499,7 @@ ok: return 0; exit_dput: - dput(dentry); + dput(path.dentry); exit: path_release(nd); return error; @@ -1519,16 +1519,16 @@ do_link: * are done. Procfs-like symlinks just set LAST_BIND. */ nd->flags |= LOOKUP_PARENT; - error = security_inode_follow_link(dentry, nd); + error = security_inode_follow_link(path.dentry, nd); if (error) goto exit_dput; - error = __do_follow_link(dentry, nd); - dput(dentry); + error = __do_follow_link(path.dentry, nd); + dput(path.dentry); if (error) return error; nd->flags &= ~LOOKUP_PARENT; if (nd->last_type == LAST_BIND) { - dentry = nd->dentry; + path.dentry = nd->dentry; goto ok; } error = -EISDIR; @@ -1545,7 +1545,7 @@ do_link: } dir = nd->dentry; down(&dir->d_inode->i_sem); - dentry = __lookup_hash(&nd->last, nd->dentry, nd); + path.dentry = __lookup_hash(&nd->last, nd->dentry, nd); putname(nd->last.name); goto do_last; } From d73ffe16b8baafae6e9249acee6b50c24099c6de Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:36:01 -0700 Subject: [PATCH 024/160] [PATCH] namei fixes (4/19) path.mnt in open_namei() set to mirror nd->mnt. nd->mnt is set in 3 places in that function - path_lookup() in the beginning, __follow_down() loop after do_last: and __do_follow_link() call after do_link:. We set path.mnt to nd->mnt after path_lookup() and __do_follow_link(). In __follow_down() loop we use &path.mnt instead of &nd->mnt and set nd->mnt to path.mnt immediately after that loop. Obviously equivalent transformation. Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/namei.c b/fs/namei.c index 167f19b5e51a..e42f7c35545a 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1442,6 +1442,7 @@ int open_namei(const char * pathname, int flag, int mode, struct nameidata *nd) nd->flags &= ~LOOKUP_PARENT; down(&dir->d_inode->i_sem); path.dentry = __lookup_hash(&nd->last, nd->dentry, nd); + path.mnt = nd->mnt; do_last: error = PTR_ERR(path.dentry); @@ -1479,7 +1480,8 @@ do_last: error = -ELOOP; if (flag & O_NOFOLLOW) goto exit_dput; - while (__follow_down(&nd->mnt,&path.dentry) && d_mountpoint(path.dentry)); + while (__follow_down(&path.mnt,&path.dentry) && d_mountpoint(path.dentry)); + nd->mnt = path.mnt; } error = -ENOENT; if (!path.dentry->d_inode) @@ -1524,6 +1526,7 @@ do_link: goto exit_dput; error = __do_follow_link(path.dentry, nd); dput(path.dentry); + path.mnt = nd->mnt; if (error) return error; nd->flags &= ~LOOKUP_PARENT; From 1be4a0900be5d2c2fd9cd012e3a153e1ea47b96a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:36:01 -0700 Subject: [PATCH 025/160] [PATCH] namei fixes (5/19) fix for too early mntput() in open_namei() - we pin path.mnt down for the duration of __do_follow_link(). Otherwise we could get the fs where our symlink lived unmounted while we were in __do_follow_link(). That would end up with dentry of symlink staying pinned down through the fs shutdown. Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/namei.c b/fs/namei.c index e42f7c35545a..020fb8c8d1cd 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1524,8 +1524,10 @@ do_link: error = security_inode_follow_link(path.dentry, nd); if (error) goto exit_dput; + mntget(path.mnt); error = __do_follow_link(path.dentry, nd); dput(path.dentry); + mntput(path.mnt); path.mnt = nd->mnt; if (error) return error; From 839d9f93c9f1623fb37234d464d739617879d97e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:36:02 -0700 Subject: [PATCH 026/160] [PATCH] namei fixes (6/19) mntget(path->mnt) in do_follow_link() moved down to right before the __do_follow_link() call and rigth after loop: resp. dput()+mntput() on non-ELOOP branch moved up to right after __do_follow_link() call. resulting loop: mntget(path->mnt); path_release(nd); dput(path->mnt); mntput(path->mnt); replaced with equivalent dput(path->mnt); path_release(nd); Equivalent transformations - the reason why we have that mntget() is that __do_follow_link() can drop a reference to nd->mnt and that's what holds path->mnt. So that call can happen at any point prior to __do_follow_link() touching nd->mnt. The rest is obvious. NOTE: current tree relies on symlinks *never* being mounted on anything. It's not hard to get rid of that assumption (actually, that will come for free later in the series). For now we are just not making the situation worse than it is. Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 020fb8c8d1cd..519900d83bcb 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -526,7 +526,6 @@ static inline int __do_follow_link(struct dentry *dentry, struct nameidata *nd) static inline int do_follow_link(struct path *path, struct nameidata *nd) { int err = -ELOOP; - mntget(path->mnt); if (current->link_count >= MAX_NESTED_LINKS) goto loop; if (current->total_link_count >= 40) @@ -539,16 +538,16 @@ static inline int do_follow_link(struct path *path, struct nameidata *nd) current->link_count++; current->total_link_count++; nd->depth++; + mntget(path->mnt); err = __do_follow_link(path->dentry, nd); + dput(path->dentry); + mntput(path->mnt); current->link_count--; nd->depth--; - dput(path->dentry); - mntput(path->mnt); return err; loop: - path_release(nd); dput(path->dentry); - mntput(path->mnt); + path_release(nd); return err; } From cd4e91d3bca8d5527289f5984cf32e9fe6fb8293 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:36:03 -0700 Subject: [PATCH 027/160] [PATCH] namei fixes (7/19) The first argument of __do_follow_link() switched to struct path * (__do_follow_link(path->dentry, ...) -> __do_follow_link(path, ...)). All callers have the same calls of mntget() right before and dput()/mntput() right after __do_follow_link(); these calls have been moved inside. Obviously equivalent transformations. Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 519900d83bcb..18ea0606145e 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -498,12 +498,15 @@ struct path { struct dentry *dentry; }; -static inline int __do_follow_link(struct dentry *dentry, struct nameidata *nd) +static inline int __do_follow_link(struct path *path, struct nameidata *nd) { int error; + struct dentry *dentry = path->dentry; touch_atime(nd->mnt, dentry); nd_set_link(nd, NULL); + + mntget(path->mnt); error = dentry->d_inode->i_op->follow_link(dentry, nd); if (!error) { char *s = nd_get_link(nd); @@ -512,6 +515,8 @@ static inline int __do_follow_link(struct dentry *dentry, struct nameidata *nd) if (dentry->d_inode->i_op->put_link) dentry->d_inode->i_op->put_link(dentry, nd); } + dput(dentry); + mntput(path->mnt); return error; } @@ -538,10 +543,7 @@ static inline int do_follow_link(struct path *path, struct nameidata *nd) current->link_count++; current->total_link_count++; nd->depth++; - mntget(path->mnt); - err = __do_follow_link(path->dentry, nd); - dput(path->dentry); - mntput(path->mnt); + err = __do_follow_link(path, nd); current->link_count--; nd->depth--; return err; @@ -1523,10 +1525,7 @@ do_link: error = security_inode_follow_link(path.dentry, nd); if (error) goto exit_dput; - mntget(path.mnt); - error = __do_follow_link(path.dentry, nd); - dput(path.dentry); - mntput(path.mnt); + error = __do_follow_link(&path, nd); path.mnt = nd->mnt; if (error) return error; From d671d5e51400aab03c713a16ce3545aa81ad7b1c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:36:04 -0700 Subject: [PATCH 028/160] [PATCH] namei fixes (8/19) In open_namei() we never use path.mnt or path.dentry after exit: or ok:. Assignment of path.dentry in case of LAST_BIND is dead code and only obfuscates already convoluted function; assignment of path.mnt after __do_follow_link() can be moved down to the place where we set path.dentry. Obviously equivalent transformations, just to clean the air a bit in that region. Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 18ea0606145e..3d08478d3130 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1526,14 +1526,11 @@ do_link: if (error) goto exit_dput; error = __do_follow_link(&path, nd); - path.mnt = nd->mnt; if (error) return error; nd->flags &= ~LOOKUP_PARENT; - if (nd->last_type == LAST_BIND) { - path.dentry = nd->dentry; + if (nd->last_type == LAST_BIND) goto ok; - } error = -EISDIR; if (nd->last_type != LAST_NORM) goto exit; @@ -1549,6 +1546,7 @@ do_link: dir = nd->dentry; down(&dir->d_inode->i_sem); path.dentry = __lookup_hash(&nd->last, nd->dentry, nd); + path.mnt = nd->mnt; putname(nd->last.name); goto do_last; } From 463ffb2e9d39c2a3fd8c3c1d4a34e01f2078f972 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:36:05 -0700 Subject: [PATCH 029/160] [PATCH] namei fixes (9/19) New helper: __follow_mount(struct path *path). Same as follow_mount(), except that we do *not* do mntput() after the first lookup_mnt(). IOW, original path->mnt stays pinned down. We also take care to do dput() before mntput() in the loop body (follow_mount() also needs that reordering, but that will be done later in the series). The following are equivalent, assuming that path.mnt == x: (1) follow_mount(&path.mnt, &path.dentry) (2) __follow_mount(&path); if (path->mnt != x) mntput(x); (3) if (__follow_mount(&path)) mntput(x); Callers of follow_mount() in __link_path_walk() converted to (2). Equivalent transformation + fix for too-late-mntput() race in __follow_mount() loop. Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 3d08478d3130..23a1ad467976 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -576,6 +576,23 @@ int follow_up(struct vfsmount **mnt, struct dentry **dentry) /* no need for dcache_lock, as serialization is taken care in * namespace.c */ +static int __follow_mount(struct path *path) +{ + int res = 0; + while (d_mountpoint(path->dentry)) { + struct vfsmount *mounted = lookup_mnt(path->mnt, path->dentry); + if (!mounted) + break; + dput(path->dentry); + if (res) + mntput(path->mnt); + path->mnt = mounted; + path->dentry = dget(mounted->mnt_root); + res = 1; + } + return res; +} + static int follow_mount(struct vfsmount **mnt, struct dentry **dentry) { int res = 0; @@ -778,7 +795,9 @@ static fastcall int __link_path_walk(const char * name, struct nameidata *nd) if (err) break; /* Check mountpoints.. */ - follow_mount(&next.mnt, &next.dentry); + __follow_mount(&next); + if (nd->mnt != next.mnt) + mntput(nd->mnt); err = -ENOENT; inode = next.dentry->d_inode; @@ -836,7 +855,9 @@ last_component: err = do_lookup(nd, &this, &next); if (err) break; - follow_mount(&next.mnt, &next.dentry); + __follow_mount(&next); + if (nd->mnt != next.mnt) + mntput(nd->mnt); inode = next.dentry->d_inode; if ((lookup_flags & LOOKUP_FOLLOW) && inode && inode->i_op && inode->i_op->follow_link) { From e13b210f6f7bdc44dfee0a9bbd633a32db0d6333 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:36:06 -0700 Subject: [PATCH 030/160] [PATCH] namei fixes (10/19) In open_namei(), __follow_down() loop turned into __follow_mount(). Instead of if we are on a mountpoint dentry if O_NOFOLLOW checks fail drop path.dentry drop nd return do equivalent of follow_mount(&path.mnt, &path.dentry) nd->mnt = path.mnt we do if __follow_mount(path) had, indeed, traversed mountpoint /* now both nd->mnt and path.mnt are pinned down */ if O_NOFOLLOW checks fail drop path.dentry drop path.mnt drop nd return mntput(nd->mnt) nd->mnt = path.mnt Now __follow_down() can be folded into follow_down() - no other callers left. We need to reorder dput()/mntput() there - same problem as in follow_mount(). Equivalent transformation + fix for a bug in O_NOFOLLOW handling - we used to get -ELOOP if we had the same fs mounted on /foo and /bar, had something bound on /bar/baz and tried to open /foo/baz with O_NOFOLLOW. And fix of too-early-mntput() race in follow_down() Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 23a1ad467976..935b08d8dcd8 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -612,26 +612,21 @@ static int follow_mount(struct vfsmount **mnt, struct dentry **dentry) /* no need for dcache_lock, as serialization is taken care in * namespace.c */ -static inline int __follow_down(struct vfsmount **mnt, struct dentry **dentry) +int follow_down(struct vfsmount **mnt, struct dentry **dentry) { struct vfsmount *mounted; mounted = lookup_mnt(*mnt, *dentry); if (mounted) { + dput(*dentry); mntput(*mnt); *mnt = mounted; - dput(*dentry); *dentry = dget(mounted->mnt_root); return 1; } return 0; } -int follow_down(struct vfsmount **mnt, struct dentry **dentry) -{ - return __follow_down(mnt,dentry); -} - static inline void follow_dotdot(struct vfsmount **mnt, struct dentry **dentry) { while(1) { @@ -1498,11 +1493,14 @@ do_last: if (flag & O_EXCL) goto exit_dput; - if (d_mountpoint(path.dentry)) { + if (__follow_mount(&path)) { error = -ELOOP; - if (flag & O_NOFOLLOW) - goto exit_dput; - while (__follow_down(&path.mnt,&path.dentry) && d_mountpoint(path.dentry)); + if (flag & O_NOFOLLOW) { + dput(path.dentry); + mntput(path.mnt); + goto exit; + } + mntput(nd->mnt); nd->mnt = path.mnt; } error = -ENOENT; From 2f12dbfbb6286c725c283a169f8f05e89a86848b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:36:07 -0700 Subject: [PATCH 031/160] [PATCH] namei fixes (11/19) shifted conditional mntput() calls in __link_path_walk() downstream. Obviously equivalent transformation. Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 935b08d8dcd8..907a3f2b4c9c 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -791,8 +791,6 @@ static fastcall int __link_path_walk(const char * name, struct nameidata *nd) break; /* Check mountpoints.. */ __follow_mount(&next); - if (nd->mnt != next.mnt) - mntput(nd->mnt); err = -ENOENT; inode = next.dentry->d_inode; @@ -803,6 +801,8 @@ static fastcall int __link_path_walk(const char * name, struct nameidata *nd) goto out_dput; if (inode->i_op->follow_link) { + if (nd->mnt != next.mnt) + mntput(nd->mnt); err = do_follow_link(&next, nd); if (err) goto return_err; @@ -815,6 +815,8 @@ static fastcall int __link_path_walk(const char * name, struct nameidata *nd) break; } else { dput(nd->dentry); + if (nd->mnt != next.mnt) + mntput(nd->mnt); nd->mnt = next.mnt; nd->dentry = next.dentry; } @@ -851,17 +853,19 @@ last_component: if (err) break; __follow_mount(&next); - if (nd->mnt != next.mnt) - mntput(nd->mnt); inode = next.dentry->d_inode; if ((lookup_flags & LOOKUP_FOLLOW) && inode && inode->i_op && inode->i_op->follow_link) { + if (next.mnt != nd->mnt) + mntput(nd->mnt); err = do_follow_link(&next, nd); if (err) goto return_err; inode = nd->dentry->d_inode; } else { dput(nd->dentry); + if (nd->mnt != next.mnt) + mntput(nd->mnt); nd->mnt = next.mnt; nd->dentry = next.dentry; } @@ -901,6 +905,8 @@ return_base: return 0; out_dput: dput(next.dentry); + if (nd->mnt != next.mnt) + mntput(nd->mnt); break; } path_release(nd); From a15a3f6fc67d910f43098acec6e19d25a37d7cb9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:36:08 -0700 Subject: [PATCH 032/160] [PATCH] namei fixes (12/19) In open_namei() we take mntput(nd->mnt);nd->mnt=path.mnt; out of the if (__follow_mount(...)), making it conditional on nd->mnt != path.mnt instead. Then we shift the result downstream. Equivalent transformations. Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 907a3f2b4c9c..37fcf941fa3f 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1506,8 +1506,6 @@ do_last: mntput(path.mnt); goto exit; } - mntput(nd->mnt); - nd->mnt = path.mnt; } error = -ENOENT; if (!path.dentry->d_inode) @@ -1517,6 +1515,9 @@ do_last: dput(nd->dentry); nd->dentry = path.dentry; + if (nd->mnt != path.mnt) + mntput(nd->mnt); + nd->mnt = path.mnt; error = -EISDIR; if (path.dentry->d_inode && S_ISDIR(path.dentry->d_inode->i_mode)) goto exit; @@ -1528,6 +1529,9 @@ ok: exit_dput: dput(path.dentry); + if (nd->mnt != path.mnt) + mntput(nd->mnt); + nd->mnt = path.mnt; exit: path_release(nd); return error; @@ -1550,6 +1554,9 @@ do_link: error = security_inode_follow_link(path.dentry, nd); if (error) goto exit_dput; + if (nd->mnt != path.mnt) + mntput(nd->mnt); + nd->mnt = path.mnt; error = __do_follow_link(&path, nd); if (error) return error; From ba7a4c1a76f56c607560f1676680ff491747bdae Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:36:08 -0700 Subject: [PATCH 033/160] [PATCH] namei fixes (13/19) In open_namei() exit_dput: we have mntput() done in the wrong order - if nd->mnt != path.mnt we end up doing mntput(nd->mnt); nd->mnt = path.mnt; dput(nd->dentry); mntput(nd->mnt); which drops nd->dentry too late. Fixed by having path.mnt go first. That allows to switch O_NOFOLLOW under if (__follow_mount(...)) back to exit_dput, while we are at it. Fix for early-mntput() race + equivalent transformation. Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 37fcf941fa3f..5153f57ee6b3 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1501,11 +1501,8 @@ do_last: if (__follow_mount(&path)) { error = -ELOOP; - if (flag & O_NOFOLLOW) { - dput(path.dentry); - mntput(path.mnt); - goto exit; - } + if (flag & O_NOFOLLOW) + goto exit_dput; } error = -ENOENT; if (!path.dentry->d_inode) @@ -1530,8 +1527,7 @@ ok: exit_dput: dput(path.dentry); if (nd->mnt != path.mnt) - mntput(nd->mnt); - nd->mnt = path.mnt; + mntput(path.mnt); exit: path_release(nd); return error; From 4b7b9772e4c3d87e649d4c419d2487aacf1235aa Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:36:10 -0700 Subject: [PATCH 034/160] [PATCH] namei fixes (14/19) shifted conditional mntput() into do_follow_link() - all callers were doing the same thing. Obviously equivalent transformation. Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 5153f57ee6b3..411bb3243c36 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -543,11 +543,15 @@ static inline int do_follow_link(struct path *path, struct nameidata *nd) current->link_count++; current->total_link_count++; nd->depth++; + if (path->mnt != nd->mnt) + mntput(nd->mnt); err = __do_follow_link(path, nd); current->link_count--; nd->depth--; return err; loop: + if (path->mnt != nd->mnt) + mntput(nd->mnt); dput(path->dentry); path_release(nd); return err; @@ -801,8 +805,6 @@ static fastcall int __link_path_walk(const char * name, struct nameidata *nd) goto out_dput; if (inode->i_op->follow_link) { - if (nd->mnt != next.mnt) - mntput(nd->mnt); err = do_follow_link(&next, nd); if (err) goto return_err; @@ -856,8 +858,6 @@ last_component: inode = next.dentry->d_inode; if ((lookup_flags & LOOKUP_FOLLOW) && inode && inode->i_op && inode->i_op->follow_link) { - if (next.mnt != nd->mnt) - mntput(nd->mnt); err = do_follow_link(&next, nd); if (err) goto return_err; From d9d29a29669f96903d9950bb881c2a393fd33849 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:36:11 -0700 Subject: [PATCH 035/160] [PATCH] namei fixes (15/19) Getting rid of sloppy logics: a) in do_follow_link() we have the wrong vfsmount dropped if our symlink had been mounted on something. Currently it worls only because we never get such situation (modulo filesystem playing dirty tricks on us). And it obfuscates already convoluted logics... b) same goes for open_namei(). c) in __link_path_walk() we have another "it should never happen" sloppiness - out_dput: there does double-free on underlying vfsmount and leaks the covering one if we hit it just after crossing a mountpoint. Again, wrong vfsmount getting dropped. d) another too-early-mntput() race - in do_follow_mount() we need to postpone conditional mntput(path->mnt) until after dput(path->dentry). Again, this one happens only in it-currently-never-happens-unless-some-fs-plays-dirty scenario... Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 411bb3243c36..6a884682b0a7 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -544,15 +544,15 @@ static inline int do_follow_link(struct path *path, struct nameidata *nd) current->total_link_count++; nd->depth++; if (path->mnt != nd->mnt) - mntput(nd->mnt); + mntput(path->mnt); err = __do_follow_link(path, nd); current->link_count--; nd->depth--; return err; loop: - if (path->mnt != nd->mnt) - mntput(nd->mnt); dput(path->dentry); + if (path->mnt != nd->mnt) + mntput(path->mnt); path_release(nd); return err; } @@ -906,7 +906,7 @@ return_base: out_dput: dput(next.dentry); if (nd->mnt != next.mnt) - mntput(nd->mnt); + mntput(next.mnt); break; } path_release(nd); @@ -1551,8 +1551,7 @@ do_link: if (error) goto exit_dput; if (nd->mnt != path.mnt) - mntput(nd->mnt); - nd->mnt = path.mnt; + mntput(path.mnt); error = __do_follow_link(&path, nd); if (error) return error; From 39ca6d49759346d4710c759d443eec8048b27213 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:36:12 -0700 Subject: [PATCH 036/160] [PATCH] namei fixes (16/19) Conditional mntput() moved into __do_follow_link(). There it collapses with unconditional mntget() on the same sucker, closing another too-early-mntput() race. Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 6a884682b0a7..444086d441e1 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -506,7 +506,8 @@ static inline int __do_follow_link(struct path *path, struct nameidata *nd) touch_atime(nd->mnt, dentry); nd_set_link(nd, NULL); - mntget(path->mnt); + if (path->mnt == nd->mnt) + mntget(path->mnt); error = dentry->d_inode->i_op->follow_link(dentry, nd); if (!error) { char *s = nd_get_link(nd); @@ -543,8 +544,6 @@ static inline int do_follow_link(struct path *path, struct nameidata *nd) current->link_count++; current->total_link_count++; nd->depth++; - if (path->mnt != nd->mnt) - mntput(path->mnt); err = __do_follow_link(path, nd); current->link_count--; nd->depth--; @@ -1550,8 +1549,6 @@ do_link: error = security_inode_follow_link(path.dentry, nd); if (error) goto exit_dput; - if (nd->mnt != path.mnt) - mntput(path.mnt); error = __do_follow_link(&path, nd); if (error) return error; From 58c465eba4d7ed307c4c7cb3382ba7ee565e8858 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:36:13 -0700 Subject: [PATCH 037/160] [PATCH] namei fixes (17/19) follow_mount() made void, reordered dput()/mntput() in it. follow_dotdot() switched from struct vfmount ** + struct dentry ** to struct nameidata *; callers updated. Equivalent transformation + fix for too-early-mntput() race. Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 35 ++++++++++++++++------------------- 1 file changed, 16 insertions(+), 19 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 444086d441e1..36925ff307b3 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -596,20 +596,17 @@ static int __follow_mount(struct path *path) return res; } -static int follow_mount(struct vfsmount **mnt, struct dentry **dentry) +static void follow_mount(struct vfsmount **mnt, struct dentry **dentry) { - int res = 0; while (d_mountpoint(*dentry)) { struct vfsmount *mounted = lookup_mnt(*mnt, *dentry); if (!mounted) break; + dput(*dentry); mntput(*mnt); *mnt = mounted; - dput(*dentry); *dentry = dget(mounted->mnt_root); - res = 1; } - return res; } /* no need for dcache_lock, as serialization is taken care in @@ -630,41 +627,41 @@ int follow_down(struct vfsmount **mnt, struct dentry **dentry) return 0; } -static inline void follow_dotdot(struct vfsmount **mnt, struct dentry **dentry) +static inline void follow_dotdot(struct nameidata *nd) { while(1) { struct vfsmount *parent; - struct dentry *old = *dentry; + struct dentry *old = nd->dentry; read_lock(¤t->fs->lock); - if (*dentry == current->fs->root && - *mnt == current->fs->rootmnt) { + if (nd->dentry == current->fs->root && + nd->mnt == current->fs->rootmnt) { read_unlock(¤t->fs->lock); break; } read_unlock(¤t->fs->lock); spin_lock(&dcache_lock); - if (*dentry != (*mnt)->mnt_root) { - *dentry = dget((*dentry)->d_parent); + if (nd->dentry != nd->mnt->mnt_root) { + nd->dentry = dget(nd->dentry->d_parent); spin_unlock(&dcache_lock); dput(old); break; } spin_unlock(&dcache_lock); spin_lock(&vfsmount_lock); - parent = (*mnt)->mnt_parent; - if (parent == *mnt) { + parent = nd->mnt->mnt_parent; + if (parent == nd->mnt) { spin_unlock(&vfsmount_lock); break; } mntget(parent); - *dentry = dget((*mnt)->mnt_mountpoint); + nd->dentry = dget(nd->mnt->mnt_mountpoint); spin_unlock(&vfsmount_lock); dput(old); - mntput(*mnt); - *mnt = parent; + mntput(nd->mnt); + nd->mnt = parent; } - follow_mount(mnt, dentry); + follow_mount(&nd->mnt, &nd->dentry); } /* @@ -772,7 +769,7 @@ static fastcall int __link_path_walk(const char * name, struct nameidata *nd) case 2: if (this.name[1] != '.') break; - follow_dotdot(&nd->mnt, &nd->dentry); + follow_dotdot(nd); inode = nd->dentry->d_inode; /* fallthrough */ case 1: @@ -839,7 +836,7 @@ last_component: case 2: if (this.name[1] != '.') break; - follow_dotdot(&nd->mnt, &nd->dentry); + follow_dotdot(nd); inode = nd->dentry->d_inode; /* fallthrough */ case 1: From 634ee7017b31e46e28c0bd2cb488213331bfd39a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:36:13 -0700 Subject: [PATCH 038/160] [PATCH] namei fixes (18/19) Cosmetical cleanups - __follow_mount() calls in __link_path_walk() absorbed into do_lookup(). Obviously equivalent transformation. Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 36925ff307b3..5af7681e8ea3 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -682,6 +682,7 @@ static int do_lookup(struct nameidata *nd, struct qstr *name, done: path->mnt = mnt; path->dentry = dentry; + __follow_mount(path); return 0; need_lookup: @@ -789,8 +790,6 @@ static fastcall int __link_path_walk(const char * name, struct nameidata *nd) err = do_lookup(nd, &this, &next); if (err) break; - /* Check mountpoints.. */ - __follow_mount(&next); err = -ENOENT; inode = next.dentry->d_inode; @@ -850,7 +849,6 @@ last_component: err = do_lookup(nd, &this, &next); if (err) break; - __follow_mount(&next); inode = next.dentry->d_inode; if ((lookup_flags & LOOKUP_FOLLOW) && inode && inode->i_op && inode->i_op->follow_link) { From d671a1cbf7c7a5c5562106d39eb7f830ae5273ae Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2005 13:36:14 -0700 Subject: [PATCH 039/160] [PATCH] namei fixes (19/19) __do_follow_link() passes potentially worng vfsmount to touch_atime(). It matters only in (currently impossible) case of symlink mounted on something, but it's trivial to fix and that actually makes more sense. Signed-off-by: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/namei.c b/fs/namei.c index 5af7681e8ea3..a7f7f44119b3 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -503,7 +503,7 @@ static inline int __do_follow_link(struct path *path, struct nameidata *nd) int error; struct dentry *dentry = path->dentry; - touch_atime(nd->mnt, dentry); + touch_atime(path->mnt, dentry); nd_set_link(nd, NULL); if (path->mnt == nd->mnt) From 8f5bb0438b86d1a5393176ceeec2836fd469edf8 Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Mon, 6 Jun 2005 14:46:32 -0700 Subject: [PATCH 040/160] [PATCH] binfmt_flat mmap flag fix Make sure that binfmt_flat passes the correct flags into do_mmap(). nommu's validate_mmap_request() will simple return -EINVAL if we try and pass it a flags value of zero. Signed-off-by: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/binfmt_flat.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c index f0cd67d9d31b..c8998dc66882 100644 --- a/fs/binfmt_flat.c +++ b/fs/binfmt_flat.c @@ -520,7 +520,7 @@ static int load_flat_file(struct linux_binprm * bprm, DBG_FLT("BINFMT_FLAT: ROM mapping of file (we hope)\n"); down_write(¤t->mm->mmap_sem); - textpos = do_mmap(bprm->file, 0, text_len, PROT_READ|PROT_EXEC, 0, 0); + textpos = do_mmap(bprm->file, 0, text_len, PROT_READ|PROT_EXEC, MAP_SHARED, 0); up_write(¤t->mm->mmap_sem); if (!textpos || textpos >= (unsigned long) -4096) { if (!textpos) @@ -532,7 +532,7 @@ static int load_flat_file(struct linux_binprm * bprm, down_write(¤t->mm->mmap_sem); realdatastart = do_mmap(0, 0, data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long), - PROT_READ|PROT_WRITE|PROT_EXEC, 0, 0); + PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 0); up_write(¤t->mm->mmap_sem); if (realdatastart == 0 || realdatastart >= (unsigned long)-4096) { @@ -574,7 +574,7 @@ static int load_flat_file(struct linux_binprm * bprm, down_write(¤t->mm->mmap_sem); textpos = do_mmap(0, 0, text_len + data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long), - PROT_READ | PROT_EXEC | PROT_WRITE, 0, 0); + PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0); up_write(¤t->mm->mmap_sem); if (!textpos || textpos >= (unsigned long) -4096) { if (!textpos) From fa04ae5c09f3dfedbc923c2954a9a26a573833f1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 6 Jun 2005 15:07:19 -0700 Subject: [PATCH 041/160] [ETHTOOL]: Check correct pointer in ethtool_set_coalesce(). It was checking the "GET" function pointer instead of the "SET" one. Looks like a cut&paste error :-) Signed-off-by: David S. Miller --- net/core/ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/ethtool.c b/net/core/ethtool.c index 8ec484894d68..a3eeb88e1c81 100644 --- a/net/core/ethtool.c +++ b/net/core/ethtool.c @@ -356,7 +356,7 @@ static int ethtool_set_coalesce(struct net_device *dev, void __user *useraddr) { struct ethtool_coalesce coalesce; - if (!dev->ethtool_ops->get_coalesce) + if (!dev->ethtool_ops->set_coalesce) return -EOPNOTSUPP; if (copy_from_user(&coalesce, useraddr, sizeof(coalesce))) From 9beb1d587f690d5b2f9087f8f10c0ff9f6b66886 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 6 Jun 2005 15:14:35 -0700 Subject: [PATCH 042/160] [TG3]: Update pci.ids for BCM5752 Signed-off-by: John W. Linville Signed-off-by: David S. Miller --- drivers/pci/pci.ids | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pci/pci.ids b/drivers/pci/pci.ids index 93481b41b613..1d2ef1e2ffc6 100644 --- a/drivers/pci/pci.ids +++ b/drivers/pci/pci.ids @@ -7173,6 +7173,7 @@ 080f Sentry5 DDR/SDR RAM Controller 0811 Sentry5 External Interface Core 0816 BCM3302 Sentry5 MIPS32 CPU + 1600 NetXtreme BCM5752 Gigabit Ethernet PCI Express 1644 NetXtreme BCM5700 Gigabit Ethernet 1014 0277 Broadcom Vigil B5700 1000Base-T 1028 00d1 Broadcom BCM5700 From 49cabf49abd7676d026a61baabf5aae9337a82be Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 6 Jun 2005 15:15:17 -0700 Subject: [PATCH 043/160] [TG3]: Add TSO firmware license Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index fc9b5cd957aa..d20501339305 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7,7 +7,12 @@ * Copyright (C) 2005 Broadcom Corporation. * * Firmware is: - * Copyright (C) 2000-2003 Broadcom Corporation. + * Derived from proprietary unpublished source code, + * Copyright (C) 2000-2003 Broadcom Corporation. + * + * Permission is hereby granted for the distribution of this firmware + * data in hexadecimal or equivalent format, provided this copyright + * notice is accompanying it. */ #include From 9ba27794197a18168b99ccecfb7b799f18b64426 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 6 Jun 2005 15:16:20 -0700 Subject: [PATCH 044/160] [TG3] Fix link failure in 5701 On some 5701 devices with older bootcode, the LED configuration bits in SRAM may be invalid with value zero. The fix is to check for invalid bits (0) and default to PHY 1 mode. Incorrect LED mode will lead to error in programming the PHY. Thanks to Grant Grundler for debugging the problem. >From Grant: | In May, 2004, tg3 v3.4 changed how MAC_LED_CTRL (0x40c) was getting | programmed and how to determine what to program into LED_CTRL. The new | code trusted NIC_SRAM_DATA_CFG (0x00000b58) to indicate what to write | to LED_CTRL and MII EXT_CTRL registers. On "IOX Core Lan", SRAM was | saying MODE_MAC (0x0) and that doesn't work. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index d20501339305..6315564d2dc0 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -8560,6 +8560,16 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) case NIC_SRAM_DATA_CFG_LED_MODE_MAC: tp->led_ctrl = LED_CTRL_MODE_MAC; + + /* Default to PHY_1_MODE if 0 (MAC_MODE) is + * read on some older 5700/5701 bootcode. + */ + if (GET_ASIC_REV(tp->pci_chip_rev_id) == + ASIC_REV_5700 || + GET_ASIC_REV(tp->pci_chip_rev_id) == + ASIC_REV_5701) + tp->led_ctrl = LED_CTRL_MODE_PHY_1; + break; case SHASTA_EXT_LED_SHARED: From 15def7bfb6902aa2b2bc67059f26d696fb27c235 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 6 Jun 2005 15:22:56 -0700 Subject: [PATCH 045/160] [TG3]: Update driver version and release date. Signed-off-by: David S. Miller --- drivers/net/tg3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 6315564d2dc0..e944aac258e3 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -66,8 +66,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.29" -#define DRV_MODULE_RELDATE "May 23, 2005" +#define DRV_MODULE_VERSION "3.30" +#define DRV_MODULE_RELDATE "June 6, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 From 74262de5d15fe0cab9e6fe75655a502d3c90acca Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Mon, 6 Jun 2005 15:50:08 -0700 Subject: [PATCH 046/160] [PATCH] ppc32: add to On ppc32, uses __user, but doesn't directly include . This adds that in. Without this, glibc will not compile. Signed-off-by: Tom Rini Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-ppc/sigcontext.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-ppc/sigcontext.h b/include/asm-ppc/sigcontext.h index f82dcccdee1e..b7a417e0a921 100644 --- a/include/asm-ppc/sigcontext.h +++ b/include/asm-ppc/sigcontext.h @@ -2,7 +2,7 @@ #define _ASM_PPC_SIGCONTEXT_H #include - +#include struct sigcontext { unsigned long _unused[4]; From 3f5948fa2cbbda1261eec9a39ef3004b3caf73fb Mon Sep 17 00:00:00 2001 From: David Mosberger Date: Mon, 6 Jun 2005 15:50:09 -0700 Subject: [PATCH 047/160] [PATCH] Include before testing CONFIG_ACPI I'm not sure why this issue is suddenly showing, but without this patchlet, the zx1 config won't compile anymore (e.g., to see the compilation-error, look for "***" in [1]). [1] http://www.gelato.unsw.edu.au/kerncomp/results//2005-06-06-17-00/zx1_defconfig-log.html Signed-off-by: David Mosberger-Tang Cc: "Brown, Len" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/acpi.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/acpi.h b/include/linux/acpi.h index d5a55bdb9c3c..b123cc08773d 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -25,6 +25,8 @@ #ifndef _LINUX_ACPI_H #define _LINUX_ACPI_H +#include + #ifdef CONFIG_ACPI #ifndef _LINUX From d0de98fa16169562bd74913c6c9b3857f9065c79 Mon Sep 17 00:00:00 2001 From: Alan Hourihane Date: Tue, 31 May 2005 19:50:49 +0100 Subject: [PATCH 048/160] [PATCH] i945G patch for agpgart Attached is a small patch for i945G support against 2.6.11.11. From: Alan Hourihane Signed-off-by: Dave Jones --- drivers/char/agp/intel-agp.c | 15 +++++++++++++-- include/linux/pci_ids.h | 2 ++ 2 files changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 8c7d727432bb..6a5047e0d333 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -418,7 +418,8 @@ static void intel_i830_init_gtt_entries(void) case I915_GMCH_GMS_STOLEN_48M: /* Check it's really I915G */ if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB || - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB || + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB) gtt_entries = MB(48) - KB(size); else gtt_entries = 0; @@ -426,7 +427,8 @@ static void intel_i830_init_gtt_entries(void) case I915_GMCH_GMS_STOLEN_64M: /* Check it's really I915G */ if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB || - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB || + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB) gtt_entries = MB(64) - KB(size); else gtt_entries = 0; @@ -1662,6 +1664,14 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev, } name = "915GM"; break; + case PCI_DEVICE_ID_INTEL_82945G_HB: + if (find_i830(PCI_DEVICE_ID_INTEL_82945G_IG)) { + bridge->driver = &intel_915_driver; + } else { + bridge->driver = &intel_845_driver; + } + name = "945G"; + break; case PCI_DEVICE_ID_INTEL_7505_0: bridge->driver = &intel_7505_driver; name = "E7505"; @@ -1801,6 +1811,7 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_7205_0), ID(PCI_DEVICE_ID_INTEL_82915G_HB), ID(PCI_DEVICE_ID_INTEL_82915GM_HB), + ID(PCI_DEVICE_ID_INTEL_82945G_HB), { } }; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index b0d6134e1ee6..18f734ec9181 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2382,6 +2382,8 @@ #define PCI_DEVICE_ID_INTEL_82915G_IG 0x2582 #define PCI_DEVICE_ID_INTEL_82915GM_HB 0x2590 #define PCI_DEVICE_ID_INTEL_82915GM_IG 0x2592 +#define PCI_DEVICE_ID_INTEL_82945G_HB 0x2770 +#define PCI_DEVICE_ID_INTEL_82945G_IG 0x2772 #define PCI_DEVICE_ID_INTEL_ICH6_0 0x2640 #define PCI_DEVICE_ID_INTEL_ICH6_1 0x2641 #define PCI_DEVICE_ID_INTEL_ICH6_2 0x2642 From e29b545cb153f230fbd8ff4c19bc98ab950f9f5c Mon Sep 17 00:00:00 2001 From: Michael Werner Date: Sun, 27 Mar 2005 22:08:42 -0800 Subject: [PATCH 049/160] [PATCH] sgi-agp: fixes a problem with accessing GART memory in sgi_tioca_insert_memory and sgi_tioca_remove_memory This patch fixes a problem with accessing GART memory in sgi_tioca_insert_memory and sgi_tioca_remove_memory. sgi-agp.c | 12 +++++++++--- 1 files changed, 9 insertions(+), 3 deletions(-) Signed-off-by: Mike Werner Signed-off-by: Dave Jones --- drivers/char/agp/sgi-agp.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/char/agp/sgi-agp.c b/drivers/char/agp/sgi-agp.c index 4b3eda267976..d3aa159c9dec 100644 --- a/drivers/char/agp/sgi-agp.c +++ b/drivers/char/agp/sgi-agp.c @@ -133,11 +133,14 @@ static int sgi_tioca_insert_memory(struct agp_memory *mem, off_t pg_start, off_t j; void *temp; struct agp_bridge_data *bridge; + u64 *table; bridge = mem->bridge; if (!bridge) return -EINVAL; + table = (u64 *)bridge->gatt_table; + temp = bridge->current_size; switch (bridge->driver->size_type) { @@ -175,7 +178,7 @@ static int sgi_tioca_insert_memory(struct agp_memory *mem, off_t pg_start, j = pg_start; while (j < (pg_start + mem->page_count)) { - if (*(bridge->gatt_table + j)) + if (table[j]) return -EBUSY; j++; } @@ -186,7 +189,7 @@ static int sgi_tioca_insert_memory(struct agp_memory *mem, off_t pg_start, } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { - *(bridge->gatt_table + j) = + table[j] = bridge->driver->mask_memory(bridge, mem->memory[i], mem->type); } @@ -200,6 +203,7 @@ static int sgi_tioca_remove_memory(struct agp_memory *mem, off_t pg_start, { size_t i; struct agp_bridge_data *bridge; + u64 *table; bridge = mem->bridge; if (!bridge) @@ -209,8 +213,10 @@ static int sgi_tioca_remove_memory(struct agp_memory *mem, off_t pg_start, return -EINVAL; } + table = (u64 *)bridge->gatt_table; + for (i = pg_start; i < (mem->page_count + pg_start); i++) { - *(bridge->gatt_table + i) = 0; + table[i] = 0; } bridge->driver->tlb_flush(mem); From 07eee78ea8ba2d0b7b20551c35a3e7dd158d50bb Mon Sep 17 00:00:00 2001 From: Keir Fraser Date: Wed, 30 Mar 2005 13:17:04 -0800 Subject: [PATCH 050/160] [PATCH] AGP fix for Xen VMM When Linux is running on the Xen virtual machine monitor, physical addresses are virtualised and cannot be directly referenced by the AGP GART. This patch fixes the GART driver for Xen by adding a layer of abstraction between physical addresses and 'GART addresses'. Architecture-specific functions are also defined for allocating and freeing the GATT. Xen requires this to ensure that table really is contiguous from the point of view of the GART. These extra interface functions are defined as 'no-ops' for all existing architectures that use the GART driver. Signed-off-by: Keir Fraser Signed-off-by: Andrew Morton Signed-off-by: Dave Jones --- drivers/char/agp/agp.h | 2 ++ drivers/char/agp/ali-agp.c | 4 ++-- drivers/char/agp/amd-k7-agp.c | 6 +++--- drivers/char/agp/amd64-agp.c | 4 ++-- drivers/char/agp/ati-agp.c | 6 +++--- drivers/char/agp/backend.c | 6 +++--- drivers/char/agp/efficeon-agp.c | 2 +- drivers/char/agp/generic.c | 17 ++++++++--------- drivers/char/agp/hp-agp.c | 4 ++-- drivers/char/agp/i460-agp.c | 4 ++-- drivers/char/agp/intel-agp.c | 6 +++--- drivers/char/agp/sworks-agp.c | 8 ++++---- drivers/char/agp/uninorth-agp.c | 2 +- include/asm-alpha/agp.h | 10 ++++++++++ include/asm-i386/agp.h | 10 ++++++++++ include/asm-ia64/agp.h | 10 ++++++++++ include/asm-ppc/agp.h | 10 ++++++++++ include/asm-ppc64/agp.h | 10 ++++++++++ include/asm-sparc64/agp.h | 10 ++++++++++ include/asm-x86_64/agp.h | 10 ++++++++++ 20 files changed, 106 insertions(+), 35 deletions(-) diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h index ad9c11391d81..c1fe013c64f3 100644 --- a/drivers/char/agp/agp.h +++ b/drivers/char/agp/agp.h @@ -278,6 +278,8 @@ void agp3_generic_cleanup(void); #define AGP_GENERIC_SIZES_ENTRIES 11 extern struct aper_size_info_16 agp3_generic_sizes[]; +#define virt_to_gart(x) (phys_to_gart(virt_to_phys(x))) +#define gart_to_virt(x) (phys_to_virt(gart_to_phys(x))) extern int agp_off; extern int agp_try_unsupported_boot; diff --git a/drivers/char/agp/ali-agp.c b/drivers/char/agp/ali-agp.c index 0212febda654..9c9c9c2247ce 100644 --- a/drivers/char/agp/ali-agp.c +++ b/drivers/char/agp/ali-agp.c @@ -150,7 +150,7 @@ static void *m1541_alloc_page(struct agp_bridge_data *bridge) pci_read_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL, &temp); pci_write_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL, (((temp & ALI_CACHE_FLUSH_ADDR_MASK) | - virt_to_phys(addr)) | ALI_CACHE_FLUSH_EN )); + virt_to_gart(addr)) | ALI_CACHE_FLUSH_EN )); return addr; } @@ -174,7 +174,7 @@ static void m1541_destroy_page(void * addr) pci_read_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL, &temp); pci_write_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL, (((temp & ALI_CACHE_FLUSH_ADDR_MASK) | - virt_to_phys(addr)) | ALI_CACHE_FLUSH_EN)); + virt_to_gart(addr)) | ALI_CACHE_FLUSH_EN)); agp_generic_destroy_page(addr); } diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c index e62a3c2c44a9..3a41672e4d66 100644 --- a/drivers/char/agp/amd-k7-agp.c +++ b/drivers/char/agp/amd-k7-agp.c @@ -43,7 +43,7 @@ static int amd_create_page_map(struct amd_page_map *page_map) SetPageReserved(virt_to_page(page_map->real)); global_cache_flush(); - page_map->remapped = ioremap_nocache(virt_to_phys(page_map->real), + page_map->remapped = ioremap_nocache(virt_to_gart(page_map->real), PAGE_SIZE); if (page_map->remapped == NULL) { ClearPageReserved(virt_to_page(page_map->real)); @@ -154,7 +154,7 @@ static int amd_create_gatt_table(struct agp_bridge_data *bridge) agp_bridge->gatt_table_real = (u32 *)page_dir.real; agp_bridge->gatt_table = (u32 __iomem *)page_dir.remapped; - agp_bridge->gatt_bus_addr = virt_to_phys(page_dir.real); + agp_bridge->gatt_bus_addr = virt_to_gart(page_dir.real); /* Get the address for the gart region. * This is a bus address even on the alpha, b/c its @@ -167,7 +167,7 @@ static int amd_create_gatt_table(struct agp_bridge_data *bridge) /* Calculate the agp offset */ for (i = 0; i < value->num_entries / 1024; i++, addr += 0x00400000) { - writel(virt_to_phys(amd_irongate_private.gatt_pages[i]->real) | 1, + writel(virt_to_gart(amd_irongate_private.gatt_pages[i]->real) | 1, page_dir.remapped+GET_PAGE_DIR_OFF(addr)); readl(page_dir.remapped+GET_PAGE_DIR_OFF(addr)); /* PCI Posting. */ } diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 399c042f68f0..1407945a5892 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -219,7 +219,7 @@ static struct aper_size_info_32 amd_8151_sizes[7] = static int amd_8151_configure(void) { - unsigned long gatt_bus = virt_to_phys(agp_bridge->gatt_table_real); + unsigned long gatt_bus = virt_to_gart(agp_bridge->gatt_table_real); /* Configure AGP regs in each x86-64 host bridge. */ for_each_nb() { @@ -591,7 +591,7 @@ static void __devexit agp_amd64_remove(struct pci_dev *pdev) { struct agp_bridge_data *bridge = pci_get_drvdata(pdev); - release_mem_region(virt_to_phys(bridge->gatt_table_real), + release_mem_region(virt_to_gart(bridge->gatt_table_real), amd64_aperture_sizes[bridge->aperture_size_idx].size); agp_remove_bridge(bridge); agp_put_bridge(bridge); diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c index a65f8827c283..e572ced9100a 100644 --- a/drivers/char/agp/ati-agp.c +++ b/drivers/char/agp/ati-agp.c @@ -61,7 +61,7 @@ static int ati_create_page_map(ati_page_map *page_map) SetPageReserved(virt_to_page(page_map->real)); err = map_page_into_agp(virt_to_page(page_map->real)); - page_map->remapped = ioremap_nocache(virt_to_phys(page_map->real), + page_map->remapped = ioremap_nocache(virt_to_gart(page_map->real), PAGE_SIZE); if (page_map->remapped == NULL || err) { ClearPageReserved(virt_to_page(page_map->real)); @@ -343,7 +343,7 @@ static int ati_create_gatt_table(struct agp_bridge_data *bridge) agp_bridge->gatt_table_real = (u32 *)page_dir.real; agp_bridge->gatt_table = (u32 __iomem *) page_dir.remapped; - agp_bridge->gatt_bus_addr = virt_to_bus(page_dir.real); + agp_bridge->gatt_bus_addr = virt_to_gart(page_dir.real); /* Write out the size register */ current_size = A_SIZE_LVL2(agp_bridge->current_size); @@ -373,7 +373,7 @@ static int ati_create_gatt_table(struct agp_bridge_data *bridge) /* Calculate the agp offset */ for(i = 0; i < value->num_entries / 1024; i++, addr += 0x00400000) { - writel(virt_to_bus(ati_generic_private.gatt_pages[i]->real) | 1, + writel(virt_to_gart(ati_generic_private.gatt_pages[i]->real) | 1, page_dir.remapped+GET_PAGE_DIR_OFF(addr)); readl(page_dir.remapped+GET_PAGE_DIR_OFF(addr)); /* PCI Posting. */ } diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c index 2f3dfb63bdc6..4d4e602fdc7e 100644 --- a/drivers/char/agp/backend.c +++ b/drivers/char/agp/backend.c @@ -148,7 +148,7 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge) return -ENOMEM; } - bridge->scratch_page_real = virt_to_phys(addr); + bridge->scratch_page_real = virt_to_gart(addr); bridge->scratch_page = bridge->driver->mask_memory(bridge, bridge->scratch_page_real, 0); } @@ -189,7 +189,7 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge) err_out: if (bridge->driver->needs_scratch_page) bridge->driver->agp_destroy_page( - phys_to_virt(bridge->scratch_page_real)); + gart_to_virt(bridge->scratch_page_real)); if (got_gatt) bridge->driver->free_gatt_table(bridge); if (got_keylist) { @@ -214,7 +214,7 @@ static void agp_backend_cleanup(struct agp_bridge_data *bridge) if (bridge->driver->agp_destroy_page && bridge->driver->needs_scratch_page) bridge->driver->agp_destroy_page( - phys_to_virt(bridge->scratch_page_real)); + gart_to_virt(bridge->scratch_page_real)); } /* When we remove the global variable agp_bridge from all drivers diff --git a/drivers/char/agp/efficeon-agp.c b/drivers/char/agp/efficeon-agp.c index 1383c3165ea1..ac19fdcd21c1 100644 --- a/drivers/char/agp/efficeon-agp.c +++ b/drivers/char/agp/efficeon-agp.c @@ -219,7 +219,7 @@ static int efficeon_create_gatt_table(struct agp_bridge_data *bridge) efficeon_private.l1_table[index] = page; - value = __pa(page) | pati | present | index; + value = virt_to_gart(page) | pati | present | index; pci_write_config_dword(agp_bridge->dev, EFFICEON_ATTPAGE, value); diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index c321a924e38a..d62505b5d25a 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -153,7 +153,7 @@ void agp_free_memory(struct agp_memory *curr) } if (curr->page_count != 0) { for (i = 0; i < curr->page_count; i++) { - curr->bridge->driver->agp_destroy_page(phys_to_virt(curr->memory[i])); + curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i])); } } agp_free_key(curr->key); @@ -209,7 +209,7 @@ struct agp_memory *agp_allocate_memory(struct agp_bridge_data *bridge, agp_free_memory(new); return NULL; } - new->memory[i] = virt_to_phys(addr); + new->memory[i] = virt_to_gart(addr); new->page_count++; } new->bridge = bridge; @@ -806,8 +806,7 @@ int agp_generic_create_gatt_table(struct agp_bridge_data *bridge) break; } - table = (char *) __get_free_pages(GFP_KERNEL, - page_order); + table = alloc_gatt_pages(page_order); if (table == NULL) { i++; @@ -838,7 +837,7 @@ int agp_generic_create_gatt_table(struct agp_bridge_data *bridge) size = ((struct aper_size_info_fixed *) temp)->size; page_order = ((struct aper_size_info_fixed *) temp)->page_order; num_entries = ((struct aper_size_info_fixed *) temp)->num_entries; - table = (char *) __get_free_pages(GFP_KERNEL, page_order); + table = alloc_gatt_pages(page_order); } if (table == NULL) @@ -853,7 +852,7 @@ int agp_generic_create_gatt_table(struct agp_bridge_data *bridge) agp_gatt_table = (void *)table; bridge->driver->cache_flush(); - bridge->gatt_table = ioremap_nocache(virt_to_phys(table), + bridge->gatt_table = ioremap_nocache(virt_to_gart(table), (PAGE_SIZE * (1 << page_order))); bridge->driver->cache_flush(); @@ -861,11 +860,11 @@ int agp_generic_create_gatt_table(struct agp_bridge_data *bridge) for (page = virt_to_page(table); page <= virt_to_page(table_end); page++) ClearPageReserved(page); - free_pages((unsigned long) table, page_order); + free_gatt_pages(table, page_order); return -ENOMEM; } - bridge->gatt_bus_addr = virt_to_phys(bridge->gatt_table_real); + bridge->gatt_bus_addr = virt_to_gart(bridge->gatt_table_real); /* AK: bogus, should encode addresses > 4GB */ for (i = 0; i < num_entries; i++) { @@ -919,7 +918,7 @@ int agp_generic_free_gatt_table(struct agp_bridge_data *bridge) for (page = virt_to_page(table); page <= virt_to_page(table_end); page++) ClearPageReserved(page); - free_pages((unsigned long) bridge->gatt_table_real, page_order); + free_gatt_pages(bridge->gatt_table_real, page_order); agp_gatt_table = NULL; bridge->gatt_table = NULL; diff --git a/drivers/char/agp/hp-agp.c b/drivers/char/agp/hp-agp.c index 6052bfa04c72..99762b6c19ae 100644 --- a/drivers/char/agp/hp-agp.c +++ b/drivers/char/agp/hp-agp.c @@ -110,7 +110,7 @@ static int __init hp_zx1_ioc_shared(void) hp->gart_size = HP_ZX1_GART_SIZE; hp->gatt_entries = hp->gart_size / hp->io_page_size; - hp->io_pdir = phys_to_virt(readq(hp->ioc_regs+HP_ZX1_PDIR_BASE)); + hp->io_pdir = gart_to_virt(readq(hp->ioc_regs+HP_ZX1_PDIR_BASE)); hp->gatt = &hp->io_pdir[HP_ZX1_IOVA_TO_PDIR(hp->gart_base)]; if (hp->gatt[0] != HP_ZX1_SBA_IOMMU_COOKIE) { @@ -248,7 +248,7 @@ hp_zx1_configure (void) agp_bridge->mode = readl(hp->lba_regs+hp->lba_cap_offset+PCI_AGP_STATUS); if (hp->io_pdir_owner) { - writel(virt_to_phys(hp->io_pdir), hp->ioc_regs+HP_ZX1_PDIR_BASE); + writel(virt_to_gart(hp->io_pdir), hp->ioc_regs+HP_ZX1_PDIR_BASE); readl(hp->ioc_regs+HP_ZX1_PDIR_BASE); writel(hp->io_tlb_ps, hp->ioc_regs+HP_ZX1_TCNFG); readl(hp->ioc_regs+HP_ZX1_TCNFG); diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c index adbea896c0d2..94943298c03e 100644 --- a/drivers/char/agp/i460-agp.c +++ b/drivers/char/agp/i460-agp.c @@ -372,7 +372,7 @@ static int i460_alloc_large_page (struct lp_desc *lp) } memset(lp->alloced_map, 0, map_size); - lp->paddr = virt_to_phys(lpage); + lp->paddr = virt_to_gart(lpage); lp->refcount = 0; atomic_add(I460_KPAGES_PER_IOPAGE, &agp_bridge->current_memory_agp); return 0; @@ -383,7 +383,7 @@ static void i460_free_large_page (struct lp_desc *lp) kfree(lp->alloced_map); lp->alloced_map = NULL; - free_pages((unsigned long) phys_to_virt(lp->paddr), I460_IO_PAGE_SHIFT - PAGE_SHIFT); + free_pages((unsigned long) gart_to_virt(lp->paddr), I460_IO_PAGE_SHIFT - PAGE_SHIFT); atomic_sub(I460_KPAGES_PER_IOPAGE, &agp_bridge->current_memory_agp); } diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 6a5047e0d333..51266d6b4d78 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -286,7 +286,7 @@ static struct agp_memory *alloc_agpphysmem_i8xx(size_t pg_count, int type) if (new == NULL) return NULL; - new->memory[0] = virt_to_phys(addr); + new->memory[0] = virt_to_gart(addr); if (pg_count == 4) { /* kludge to get 4 physical pages for ARGB cursor */ new->memory[1] = new->memory[0] + PAGE_SIZE; @@ -329,10 +329,10 @@ static void intel_i810_free_by_type(struct agp_memory *curr) agp_free_key(curr->key); if(curr->type == AGP_PHYS_MEMORY) { if (curr->page_count == 4) - i8xx_destroy_pages(phys_to_virt(curr->memory[0])); + i8xx_destroy_pages(gart_to_virt(curr->memory[0])); else agp_bridge->driver->agp_destroy_page( - phys_to_virt(curr->memory[0])); + gart_to_virt(curr->memory[0])); vfree(curr->memory); } kfree(curr); diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c index 10c23302dd84..a9fb12c20eb7 100644 --- a/drivers/char/agp/sworks-agp.c +++ b/drivers/char/agp/sworks-agp.c @@ -51,7 +51,7 @@ static int serverworks_create_page_map(struct serverworks_page_map *page_map) } SetPageReserved(virt_to_page(page_map->real)); global_cache_flush(); - page_map->remapped = ioremap_nocache(virt_to_phys(page_map->real), + page_map->remapped = ioremap_nocache(virt_to_gart(page_map->real), PAGE_SIZE); if (page_map->remapped == NULL) { ClearPageReserved(virt_to_page(page_map->real)); @@ -162,7 +162,7 @@ static int serverworks_create_gatt_table(struct agp_bridge_data *bridge) /* Create a fake scratch directory */ for(i = 0; i < 1024; i++) { writel(agp_bridge->scratch_page, serverworks_private.scratch_dir.remapped+i); - writel(virt_to_phys(serverworks_private.scratch_dir.real) | 1, page_dir.remapped+i); + writel(virt_to_gart(serverworks_private.scratch_dir.real) | 1, page_dir.remapped+i); } retval = serverworks_create_gatt_pages(value->num_entries / 1024); @@ -174,7 +174,7 @@ static int serverworks_create_gatt_table(struct agp_bridge_data *bridge) agp_bridge->gatt_table_real = (u32 *)page_dir.real; agp_bridge->gatt_table = (u32 __iomem *)page_dir.remapped; - agp_bridge->gatt_bus_addr = virt_to_phys(page_dir.real); + agp_bridge->gatt_bus_addr = virt_to_gart(page_dir.real); /* Get the address for the gart region. * This is a bus address even on the alpha, b/c its @@ -187,7 +187,7 @@ static int serverworks_create_gatt_table(struct agp_bridge_data *bridge) /* Calculate the agp offset */ for(i = 0; i < value->num_entries / 1024; i++) - writel(virt_to_phys(serverworks_private.gatt_pages[i]->real)|1, page_dir.remapped+i); + writel(virt_to_gart(serverworks_private.gatt_pages[i]->real)|1, page_dir.remapped+i); return 0; } diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index a673971f2a90..c8255312b8c1 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -407,7 +407,7 @@ static int uninorth_create_gatt_table(struct agp_bridge_data *bridge) bridge->gatt_table_real = (u32 *) table; bridge->gatt_table = (u32 *)table; - bridge->gatt_bus_addr = virt_to_phys(table); + bridge->gatt_bus_addr = virt_to_gart(table); for (i = 0; i < num_entries; i++) bridge->gatt_table[i] = 0; diff --git a/include/asm-alpha/agp.h b/include/asm-alpha/agp.h index c99dbbb5bcb5..ef855a3bc0f5 100644 --- a/include/asm-alpha/agp.h +++ b/include/asm-alpha/agp.h @@ -10,4 +10,14 @@ #define flush_agp_mappings() #define flush_agp_cache() mb() +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + #endif diff --git a/include/asm-i386/agp.h b/include/asm-i386/agp.h index a917ff50354f..b82f5f3ab887 100644 --- a/include/asm-i386/agp.h +++ b/include/asm-i386/agp.h @@ -21,4 +21,14 @@ int unmap_page_from_agp(struct page *page); worth it. Would need a page for it. */ #define flush_agp_cache() asm volatile("wbinvd":::"memory") +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + #endif diff --git a/include/asm-ia64/agp.h b/include/asm-ia64/agp.h index d1316f1e6ee1..4e517f0e6afa 100644 --- a/include/asm-ia64/agp.h +++ b/include/asm-ia64/agp.h @@ -18,4 +18,14 @@ #define flush_agp_mappings() /* nothing */ #define flush_agp_cache() mb() +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + #endif /* _ASM_IA64_AGP_H */ diff --git a/include/asm-ppc/agp.h b/include/asm-ppc/agp.h index be27cfa8c5b0..ca9e423307f4 100644 --- a/include/asm-ppc/agp.h +++ b/include/asm-ppc/agp.h @@ -10,4 +10,14 @@ #define flush_agp_mappings() #define flush_agp_cache() mb() +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + #endif diff --git a/include/asm-ppc64/agp.h b/include/asm-ppc64/agp.h index be27cfa8c5b0..ca9e423307f4 100644 --- a/include/asm-ppc64/agp.h +++ b/include/asm-ppc64/agp.h @@ -10,4 +10,14 @@ #define flush_agp_mappings() #define flush_agp_cache() mb() +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + #endif diff --git a/include/asm-sparc64/agp.h b/include/asm-sparc64/agp.h index ba05bdf9a211..58f8cb6ae767 100644 --- a/include/asm-sparc64/agp.h +++ b/include/asm-sparc64/agp.h @@ -8,4 +8,14 @@ #define flush_agp_mappings() #define flush_agp_cache() mb() +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + #endif diff --git a/include/asm-x86_64/agp.h b/include/asm-x86_64/agp.h index 0bb9019d58aa..06c52ee9c06b 100644 --- a/include/asm-x86_64/agp.h +++ b/include/asm-x86_64/agp.h @@ -19,4 +19,14 @@ int unmap_page_from_agp(struct page *page); worth it. Would need a page for it. */ #define flush_agp_cache() asm volatile("wbinvd":::"memory") +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + #endif From 66bb8bf8b235ba4d37fda14375827864977c6a3e Mon Sep 17 00:00:00 2001 From: David Mosberger Date: Mon, 4 Apr 2005 13:29:43 -0700 Subject: [PATCH 051/160] [PATCH] Replace check_bridge_mode() with (bridge->mode & AGSTAT_MODE_3_0). [AGPGART] Replace check_bridge_mode() with (bridge->mode & AGSTAT_MODE_3_0). As mentioned earlier, the current check_bridge_mode() code assumes that AGP bridges are PCI devices. This isn't always true. Definitely not for HP zx1 chipset and the same seems to be the case for SGI's AGP bridge. The patch below fixes the problem by picking up the AGP_MODE_3_0 bit from bridge->mode. I feel like I may be missing something, since I can't see any reason why check_bridge_mode() wasn't doing that in the first place. According to the AGP 3.0 specs, the AGP_MODE_3_0 bit is determined during the hardware reset and cannot be changed, so it seems to me it should be safe to pick it up from bridge->mode. With the patch applied, I can definitely use AGP acceleration both with AGP 2.0 and AGP 3.0 (one with an Nvidia card, the other with an ATI FireGL card). Unless someone spots a problem, please apply this patch so 3d acceleration can work on zx1 boxes again. This makes AGP work again on machines with an AGP bridge that isn't a PCI device. Signed-off-by: David Mosberger-Tang Signed-off-by: Dave Jones --- drivers/char/agp/generic.c | 19 +++---------------- 1 file changed, 3 insertions(+), 16 deletions(-) diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index d62505b5d25a..f0079e991bdc 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -295,19 +295,6 @@ int agp_num_entries(void) EXPORT_SYMBOL_GPL(agp_num_entries); -static int check_bridge_mode(struct pci_dev *dev) -{ - u32 agp3; - u8 cap_ptr; - - cap_ptr = pci_find_capability(dev, PCI_CAP_ID_AGP); - pci_read_config_dword(dev, cap_ptr+AGPSTAT, &agp3); - if (agp3 & AGPSTAT_MODE_3_0) - return 1; - return 0; -} - - /** * agp_copy_info - copy bridge state information * @@ -328,7 +315,7 @@ int agp_copy_info(struct agp_bridge_data *bridge, struct agp_kern_info *info) info->version.minor = bridge->version->minor; info->chipset = SUPPORTED; info->device = bridge->dev; - if (check_bridge_mode(bridge->dev)) + if (bridge->mode & AGPSTAT_MODE_3_0) info->mode = bridge->mode & ~AGP3_RESERVED_MASK; else info->mode = bridge->mode & ~AGP2_RESERVED_MASK; @@ -661,7 +648,7 @@ u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 requested_mode bridge_agpstat &= ~AGPSTAT_FW; /* Check to see if we are operating in 3.0 mode */ - if (check_bridge_mode(agp_bridge->dev)) + if (agp_bridge->mode & AGPSTAT_MODE_3_0) agp_v3_parse_one(&requested_mode, &bridge_agpstat, &vga_agpstat); else agp_v2_parse_one(&requested_mode, &bridge_agpstat, &vga_agpstat); @@ -732,7 +719,7 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode) /* Do AGP version specific frobbing. */ if (bridge->major_version >= 3) { - if (check_bridge_mode(bridge->dev)) { + if (bridge->mode & AGPSTAT_MODE_3_0) { /* If we have 3.5, we can do the isoch stuff. */ if (bridge->minor_version >= 5) agp_3_5_enable(bridge); From eda9937656e0b9879ca521140fe61cbc9788c398 Mon Sep 17 00:00:00 2001 From: Matthew Dobson Date: Tue, 7 Jun 2005 13:22:05 -0700 Subject: [PATCH 052/160] [PATCH] send_IPI_mask_sequence() warning fix In file included from arch/i386/kernel/smp.c:235: include/asm-i386/mach-numaq/mach_ipi.h:4: warning: `send_IPI_mask_sequence' declared inline after its definition Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-i386/mach-numaq/mach_ipi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-i386/mach-numaq/mach_ipi.h b/include/asm-i386/mach-numaq/mach_ipi.h index 1b46fd3f2ae3..c6044488e9e6 100644 --- a/include/asm-i386/mach-numaq/mach_ipi.h +++ b/include/asm-i386/mach-numaq/mach_ipi.h @@ -1,7 +1,7 @@ #ifndef __ASM_MACH_IPI_H #define __ASM_MACH_IPI_H -inline void send_IPI_mask_sequence(cpumask_t, int vector); +void send_IPI_mask_sequence(cpumask_t, int vector); static inline void send_IPI_mask(cpumask_t mask, int vector) { From ad95d6098dd1e94a09d2a1fdf39fd8281fcd8958 Mon Sep 17 00:00:00 2001 From: Eugene Surovegin Date: Tue, 7 Jun 2005 13:22:09 -0700 Subject: [PATCH 053/160] [PATCH] ppc32: add 405EP cpu_spec entry Add a definition for PPC 405EP which was lost somehow during 2.4 -> 2.6 transition. Recent change to arch/ppc/kernel/misc.S ("Fix incorrect CPU_FTR fixup usage for unified caches") triggered this bug and 405EP boards don't boot anymore. Signed-off-by: Eugene Surovegin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/kernel/cputable.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c index 8aa5e8c69009..d44b7dc5390a 100644 --- a/arch/ppc/kernel/cputable.c +++ b/arch/ppc/kernel/cputable.c @@ -838,6 +838,17 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, }, + { /* 405EP */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x51210000, + .cpu_name = "405EP", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .icache_bsize = 32, + .dcache_bsize = 32, + }, #endif /* CONFIG_40x */ #ifdef CONFIG_44x From a86d1f4301fad4ff44c1f614c897000bc574ab2f Mon Sep 17 00:00:00 2001 From: Vojtech Pavlik Date: Tue, 7 Jun 2005 13:22:14 -0700 Subject: [PATCH 054/160] [PATCH] input: disable scroll feature on AT keyboards This patch disables the scroll feature on AT keyboards by default, because it causes the numbers of mouse devices to shift, breaking user setups. Signed-off-by: Vojtech Pavlik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/input/keyboard/atkbd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index af0446c6de82..48fdf1e517cf 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -54,7 +54,7 @@ static int atkbd_softraw = 1; module_param_named(softraw, atkbd_softraw, bool, 0); MODULE_PARM_DESC(softraw, "Use software generated rawmode"); -static int atkbd_scroll = 1; +static int atkbd_scroll = 0; module_param_named(scroll, atkbd_scroll, bool, 0); MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards"); From 93cffffa19960464a52f9c78d9a6150270d23785 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 7 Jun 2005 13:22:18 -0700 Subject: [PATCH 055/160] [PATCH] PCI: do VIA IRQ fixup always, not just in PIC mode At least some VIA chipsets require the fixup even in IO-APIC mode. This was found and debugged with the patient assistance of Stian Jordet on an Asus CUV266-DLS motherboard. Signed-off-by: Bjorn Helgaas Signed-off-by: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pci/quirks.c | 35 +++++++++++++---------------------- 1 file changed, 13 insertions(+), 22 deletions(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 637e9493034b..2194669300bf 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -459,17 +459,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_APIC, #endif /* CONFIG_X86_IO_APIC */ -/* - * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip - * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature: - * when written, it makes an internal connection to the PIC. - * For these devices, this register is defined to be 4 bits wide. - * Normally this is fine. However for IO-APIC motherboards, or - * non-x86 architectures (yes Via exists on PPC among other places), - * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get - * interrupts delivered properly. - */ - /* * FIXME: it is questionable that quirk_via_acpi * is needed. It shows up as an ISA bridge, and does not @@ -492,28 +481,30 @@ static void __devinit quirk_via_acpi(struct pci_dev *d) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi ); -static void quirk_via_irqpic(struct pci_dev *dev) +/* + * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip + * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature: + * when written, it makes an internal connection to the PIC. + * For these devices, this register is defined to be 4 bits wide. + * Normally this is fine. However for IO-APIC motherboards, or + * non-x86 architectures (yes Via exists on PPC among other places), + * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get + * interrupts delivered properly. + */ +static void quirk_via_irq(struct pci_dev *dev) { u8 irq, new_irq; -#ifdef CONFIG_X86_IO_APIC - if (nr_ioapics && !skip_ioapic_setup) - return; -#endif -#ifdef CONFIG_ACPI - if (acpi_irq_model != ACPI_IRQ_MODEL_PIC) - return; -#endif new_irq = dev->irq & 0xf; pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); if (new_irq != irq) { - printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n", + printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n", pci_name(dev), irq, new_irq); udelay(15); /* unknown if delay really needed */ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); } } -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic); +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq); /* * PIIX3 USB: We have to disable USB interrupts that are From 1d6757fbff5bc86e94e59ab0d7bdd7e71351d839 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 7 Jun 2005 18:37:01 -0400 Subject: [PATCH 056/160] [PATCH] NFS: Fix lookup intent handling We should never apply a lookup intent to anything other than the last path component in an open(), create() or access() call. Introduce the helper nfs_lookup_check_intent() which always returns zero if LOOKUP_CONTINUE or LOOKUP_PARENT are set, and returns the intent flags if we're on the last component of the lookup. By doing so, we fix a bug in open(O_EXCL), where we may end up optimizing away a real lookup of the parent directory. Problem noticed by Linda Dunaphant Signed-off-by: Trond Myklebust Signed-off-by: Linus Torvalds --- fs/nfs/dir.c | 49 +++++++++++++++++++++++++++++++++++-------------- 1 file changed, 35 insertions(+), 14 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 73f96acd5d37..ff6155f5e8d9 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -528,19 +528,39 @@ static inline void nfs_renew_times(struct dentry * dentry) dentry->d_time = jiffies; } +/* + * Return the intent data that applies to this particular path component + * + * Note that the current set of intents only apply to the very last + * component of the path. + * We check for this using LOOKUP_CONTINUE and LOOKUP_PARENT. + */ +static inline unsigned int nfs_lookup_check_intent(struct nameidata *nd, unsigned int mask) +{ + if (nd->flags & (LOOKUP_CONTINUE|LOOKUP_PARENT)) + return 0; + return nd->flags & mask; +} + +/* + * Inode and filehandle revalidation for lookups. + * + * We force revalidation in the cases where the VFS sets LOOKUP_REVAL, + * or if the intent information indicates that we're about to open this + * particular file and the "nocto" mount flag is not set. + * + */ static inline int nfs_lookup_verify_inode(struct inode *inode, struct nameidata *nd) { struct nfs_server *server = NFS_SERVER(inode); if (nd != NULL) { - int ndflags = nd->flags; /* VFS wants an on-the-wire revalidation */ - if (ndflags & LOOKUP_REVAL) + if (nd->flags & LOOKUP_REVAL) goto out_force; /* This is an open(2) */ - if ((ndflags & LOOKUP_OPEN) && - !(ndflags & LOOKUP_CONTINUE) && + if (nfs_lookup_check_intent(nd, LOOKUP_OPEN) != 0 && !(server->flags & NFS_MOUNT_NOCTO)) goto out_force; } @@ -560,12 +580,8 @@ static inline int nfs_neg_need_reval(struct inode *dir, struct dentry *dentry, struct nameidata *nd) { - int ndflags = 0; - - if (nd) - ndflags = nd->flags; /* Don't revalidate a negative dentry if we're creating a new file */ - if ((ndflags & LOOKUP_CREATE) && !(ndflags & LOOKUP_CONTINUE)) + if (nd != NULL && nfs_lookup_check_intent(nd, LOOKUP_CREATE) != 0) return 0; return !nfs_check_verifier(dir, dentry); } @@ -700,12 +716,16 @@ struct dentry_operations nfs_dentry_operations = { .d_iput = nfs_dentry_iput, }; +/* + * Use intent information to check whether or not we're going to do + * an O_EXCL create using this path component. + */ static inline int nfs_is_exclusive_create(struct inode *dir, struct nameidata *nd) { if (NFS_PROTO(dir)->version == 2) return 0; - if (!nd || (nd->flags & LOOKUP_CONTINUE) || !(nd->flags & LOOKUP_CREATE)) + if (nd == NULL || nfs_lookup_check_intent(nd, LOOKUP_CREATE) == 0) return 0; return (nd->intent.open.flags & O_EXCL) != 0; } @@ -772,12 +792,13 @@ struct dentry_operations nfs4_dentry_operations = { .d_iput = nfs_dentry_iput, }; +/* + * Use intent information to determine whether we need to substitute + * the NFSv4-style stateful OPEN for the LOOKUP call + */ static int is_atomic_open(struct inode *dir, struct nameidata *nd) { - if (!nd) - return 0; - /* Check that we are indeed trying to open this file */ - if ((nd->flags & LOOKUP_CONTINUE) || !(nd->flags & LOOKUP_OPEN)) + if (nd == NULL || nfs_lookup_check_intent(nd, LOOKUP_OPEN) == 0) return 0; /* NFS does not (yet) have a stateful open for directories */ if (nd->flags & LOOKUP_DIRECTORY) From f8f98a9335db4a7d6285b785180fad720bf22864 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 8 Jun 2005 15:28:24 +0100 Subject: [PATCH 057/160] [PATCH] ARM: Fix Xscale copy_page implementation The ARM copypage changes in 2.6.12-rc4-git1 removed the preempt locking from the copypage functions which broke the XScale implementation. This patch fixes the locking on XScale and removes the now unneeded minicache code. Signed-off-by: Russell King Checked-by: Richard Purdie --- arch/arm/mm/Kconfig | 7 -- arch/arm/mm/Makefile | 2 - arch/arm/mm/copypage-xscale.S | 113 ----------------------------- arch/arm/mm/copypage-xscale.c | 131 ++++++++++++++++++++++++++++++++++ arch/arm/mm/minicache.c | 73 ------------------- 5 files changed, 131 insertions(+), 195 deletions(-) delete mode 100644 arch/arm/mm/copypage-xscale.S create mode 100644 arch/arm/mm/copypage-xscale.c diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 48bac7da8c70..ade0e2222f59 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -228,7 +228,6 @@ config CPU_SA1100 select CPU_CACHE_V4WB select CPU_CACHE_VIVT select CPU_TLB_V4WB - select CPU_MINICACHE # XScale config CPU_XSCALE @@ -239,7 +238,6 @@ config CPU_XSCALE select CPU_ABRT_EV5T select CPU_CACHE_VIVT select CPU_TLB_V4WBI - select CPU_MINICACHE # ARMv6 config CPU_V6 @@ -345,11 +343,6 @@ config CPU_TLB_V4WBI config CPU_TLB_V6 bool -config CPU_MINICACHE - bool - help - Processor has a minicache. - comment "Processor Features" config ARM_THUMB diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index ccf316c11e02..59f47d4c2dfe 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -31,8 +31,6 @@ obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o mmu.o obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o -obj-$(CONFIG_CPU_MINICACHE) += minicache.o - obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o obj-$(CONFIG_CPU_TLB_V4WB) += tlb-v4wb.o diff --git a/arch/arm/mm/copypage-xscale.S b/arch/arm/mm/copypage-xscale.S deleted file mode 100644 index bb277316ef52..000000000000 --- a/arch/arm/mm/copypage-xscale.S +++ /dev/null @@ -1,113 +0,0 @@ -/* - * linux/arch/arm/lib/copypage-xscale.S - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -/* - * General note: - * We don't really want write-allocate cache behaviour for these functions - * since that will just eat through 8K of the cache. - */ - - .text - .align 5 -/* - * XScale optimised copy_user_page - * r0 = destination - * r1 = source - * r2 = virtual user address of ultimate destination page - * - * The source page may have some clean entries in the cache already, but we - * can safely ignore them - break_cow() will flush them out of the cache - * if we eventually end up using our copied page. - * - * What we could do is use the mini-cache to buffer reads from the source - * page. We rely on the mini-cache being smaller than one page, so we'll - * cycle through the complete cache anyway. - */ -ENTRY(xscale_mc_copy_user_page) - stmfd sp!, {r4, r5, lr} - mov r5, r0 - mov r0, r1 - bl map_page_minicache - mov r1, r5 - mov lr, #PAGE_SZ/64-1 - - /* - * Strangely enough, best performance is achieved - * when prefetching destination as well. (NP) - */ - pld [r0, #0] - pld [r0, #32] - pld [r1, #0] - pld [r1, #32] - -1: pld [r0, #64] - pld [r0, #96] - pld [r1, #64] - pld [r1, #96] - -2: ldrd r2, [r0], #8 - ldrd r4, [r0], #8 - mov ip, r1 - strd r2, [r1], #8 - ldrd r2, [r0], #8 - strd r4, [r1], #8 - ldrd r4, [r0], #8 - strd r2, [r1], #8 - strd r4, [r1], #8 - mcr p15, 0, ip, c7, c10, 1 @ clean D line - ldrd r2, [r0], #8 - mcr p15, 0, ip, c7, c6, 1 @ invalidate D line - ldrd r4, [r0], #8 - mov ip, r1 - strd r2, [r1], #8 - ldrd r2, [r0], #8 - strd r4, [r1], #8 - ldrd r4, [r0], #8 - strd r2, [r1], #8 - strd r4, [r1], #8 - mcr p15, 0, ip, c7, c10, 1 @ clean D line - subs lr, lr, #1 - mcr p15, 0, ip, c7, c6, 1 @ invalidate D line - bgt 1b - beq 2b - - ldmfd sp!, {r4, r5, pc} - - .align 5 -/* - * XScale optimised clear_user_page - * r0 = destination - * r1 = virtual user address of ultimate destination page - */ -ENTRY(xscale_mc_clear_user_page) - mov r1, #PAGE_SZ/32 - mov r2, #0 - mov r3, #0 -1: mov ip, r0 - strd r2, [r0], #8 - strd r2, [r0], #8 - strd r2, [r0], #8 - strd r2, [r0], #8 - mcr p15, 0, ip, c7, c10, 1 @ clean D line - subs r1, r1, #1 - mcr p15, 0, ip, c7, c6, 1 @ invalidate D line - bne 1b - mov pc, lr - - __INITDATA - - .type xscale_mc_user_fns, #object -ENTRY(xscale_mc_user_fns) - .long xscale_mc_clear_user_page - .long xscale_mc_copy_user_page - .size xscale_mc_user_fns, . - xscale_mc_user_fns diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c new file mode 100644 index 000000000000..42a6ee255ce0 --- /dev/null +++ b/arch/arm/mm/copypage-xscale.c @@ -0,0 +1,131 @@ +/* + * linux/arch/arm/lib/copypage-xscale.S + * + * Copyright (C) 1995-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This handles the mini data cache, as found on SA11x0 and XScale + * processors. When we copy a user page page, we map it in such a way + * that accesses to this page will not touch the main data cache, but + * will be cached in the mini data cache. This prevents us thrashing + * the main data cache on page faults. + */ +#include +#include + +#include +#include +#include + +/* + * 0xffff8000 to 0xffffffff is reserved for any ARM architecture + * specific hacks for copying pages efficiently. + */ +#define COPYPAGE_MINICACHE 0xffff8000 + +#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ + L_PTE_CACHEABLE) + +#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) + +static DEFINE_SPINLOCK(minicache_lock); + +/* + * XScale mini-dcache optimised copy_user_page + * + * We flush the destination cache lines just before we write the data into the + * corresponding address. Since the Dcache is read-allocate, this removes the + * Dcache aliasing issue. The writes will be forwarded to the write buffer, + * and merged as appropriate. + */ +static void __attribute__((naked)) +mc_copy_user_page(void *from, void *to) +{ + /* + * Strangely enough, best performance is achieved + * when prefetching destination as well. (NP) + */ + asm volatile( + "stmfd sp!, {r4, r5, lr} \n\ + mov lr, %2 \n\ + pld [r0, #0] \n\ + pld [r0, #32] \n\ + pld [r1, #0] \n\ + pld [r1, #32] \n\ +1: pld [r0, #64] \n\ + pld [r0, #96] \n\ + pld [r1, #64] \n\ + pld [r1, #96] \n\ +2: ldrd r2, [r0], #8 \n\ + ldrd r4, [r0], #8 \n\ + mov ip, r1 \n\ + strd r2, [r1], #8 \n\ + ldrd r2, [r0], #8 \n\ + strd r4, [r1], #8 \n\ + ldrd r4, [r0], #8 \n\ + strd r2, [r1], #8 \n\ + strd r4, [r1], #8 \n\ + mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\ + ldrd r2, [r0], #8 \n\ + mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\ + ldrd r4, [r0], #8 \n\ + mov ip, r1 \n\ + strd r2, [r1], #8 \n\ + ldrd r2, [r0], #8 \n\ + strd r4, [r1], #8 \n\ + ldrd r4, [r0], #8 \n\ + strd r2, [r1], #8 \n\ + strd r4, [r1], #8 \n\ + mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\ + subs lr, lr, #1 \n\ + mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\ + bgt 1b \n\ + beq 2b \n\ + ldmfd sp!, {r4, r5, pc} " + : + : "r" (from), "r" (to), "I" (PAGE_SIZE / 64 - 1)); +} + +void xscale_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr) +{ + spin_lock(&minicache_lock); + + set_pte(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot)); + flush_tlb_kernel_page(COPYPAGE_MINICACHE); + + mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto); + + spin_unlock(&minicache_lock); +} + +/* + * XScale optimised clear_user_page + */ +void __attribute__((naked)) +xscale_mc_clear_user_page(void *kaddr, unsigned long vaddr) +{ + asm volatile( + "mov r1, %0 \n\ + mov r2, #0 \n\ + mov r3, #0 \n\ +1: mov ip, r0 \n\ + strd r2, [r0], #8 \n\ + strd r2, [r0], #8 \n\ + strd r2, [r0], #8 \n\ + strd r2, [r0], #8 \n\ + mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\ + subs r1, r1, #1 \n\ + mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\ + bne 1b \n\ + mov pc, lr" + : + : "I" (PAGE_SIZE / 32)); +} + +struct cpu_user_fns xscale_mc_user_fns __initdata = { + .cpu_clear_user_page = xscale_mc_clear_user_page, + .cpu_copy_user_page = xscale_mc_copy_user_page, +}; diff --git a/arch/arm/mm/minicache.c b/arch/arm/mm/minicache.c index dedf2ab01b2a..e69de29bb2d1 100644 --- a/arch/arm/mm/minicache.c +++ b/arch/arm/mm/minicache.c @@ -1,73 +0,0 @@ -/* - * linux/arch/arm/mm/minicache.c - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This handles the mini data cache, as found on SA11x0 and XScale - * processors. When we copy a user page page, we map it in such a way - * that accesses to this page will not touch the main data cache, but - * will be cached in the mini data cache. This prevents us thrashing - * the main data cache on page faults. - */ -#include -#include - -#include -#include -#include - -/* - * 0xffff8000 to 0xffffffff is reserved for any ARM architecture - * specific hacks for copying pages efficiently. - */ -#define minicache_address (0xffff8000) -#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ - L_PTE_CACHEABLE) - -static pte_t *minicache_pte; - -/* - * Note that this is intended to be called only from the copy_user_page - * asm code; anything else will require special locking to prevent the - * mini-cache space being re-used. (Note: probably preempt unsafe). - * - * We rely on the fact that the minicache is 2K, and we'll be pushing - * 4K of data through it, so we don't actually have to specifically - * flush the minicache when we change the mapping. - * - * Note also: assert(PAGE_OFFSET <= virt < high_memory). - * Unsafe: preempt, kmap. - */ -unsigned long map_page_minicache(unsigned long virt) -{ - set_pte(minicache_pte, pfn_pte(__pa(virt) >> PAGE_SHIFT, minicache_pgprot)); - flush_tlb_kernel_page(minicache_address); - - return minicache_address; -} - -static int __init minicache_init(void) -{ - pgd_t *pgd; - pmd_t *pmd; - - spin_lock(&init_mm.page_table_lock); - - pgd = pgd_offset_k(minicache_address); - pmd = pmd_alloc(&init_mm, pgd, minicache_address); - if (!pmd) - BUG(); - minicache_pte = pte_alloc_kernel(&init_mm, pmd, minicache_address); - if (!minicache_pte) - BUG(); - - spin_unlock(&init_mm.page_table_lock); - - return 0; -} - -core_initcall(minicache_init); From 7840e5e95c1a8622425f11454600a49b6c718886 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Wed, 8 Jun 2005 15:12:00 +1000 Subject: [PATCH 058/160] [PATCH] ppc64: print negative numbers correctly in boot wrapper if num has a value of -1, accessing the digits[] array will fail and the format string will be printed in funny way, or not at all. This happens if one prints negative numbers. Just change the code to match lib/vsprintf.c asm/div64.h cant be used because u64 maps to u32 for this build. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- arch/ppc64/boot/prom.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) diff --git a/arch/ppc64/boot/prom.c b/arch/ppc64/boot/prom.c index 7b607d1862cb..d5218b15824e 100644 --- a/arch/ppc64/boot/prom.c +++ b/arch/ppc64/boot/prom.c @@ -11,6 +11,23 @@ #include #include +extern __u32 __div64_32(unsigned long long *dividend, __u32 divisor); + +/* The unnecessary pointer compare is there + * to check for type safety (n must be 64bit) + */ +# define do_div(n,base) ({ \ + __u32 __base = (base); \ + __u32 __rem; \ + (void)(((typeof((n)) *)0) == ((unsigned long long *)0)); \ + if (((n) >> 32) == 0) { \ + __rem = (__u32)(n) % __base; \ + (n) = (__u32)(n) / __base; \ + } else \ + __rem = __div64_32(&(n), __base); \ + __rem; \ + }) + int (*prom)(void *); void *chosen_handle; @@ -352,7 +369,7 @@ static int skip_atoi(const char **s) #define SPECIAL 32 /* 0x */ #define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */ -static char * number(char * str, long num, int base, int size, int precision, int type) +static char * number(char * str, unsigned long long num, int base, int size, int precision, int type) { char c,sign,tmp[66]; const char *digits="0123456789abcdefghijklmnopqrstuvwxyz"; @@ -367,9 +384,9 @@ static char * number(char * str, long num, int base, int size, int precision, in c = (type & ZEROPAD) ? '0' : ' '; sign = 0; if (type & SIGN) { - if (num < 0) { + if ((signed long long)num < 0) { sign = '-'; - num = -num; + num = - (signed long long)num; size--; } else if (type & PLUS) { sign = '+'; @@ -389,8 +406,7 @@ static char * number(char * str, long num, int base, int size, int precision, in if (num == 0) tmp[i++]='0'; else while (num != 0) { - tmp[i++] = digits[num % base]; - num /= base; + tmp[i++] = digits[do_div(num, base)]; } if (i > precision) precision = i; @@ -426,7 +442,7 @@ int sprintf(char * buf, const char *fmt, ...); int vsprintf(char *buf, const char *fmt, va_list args) { int len; - unsigned long num; + unsigned long long num; int i, base; char * str; const char *s; From 358c6ac0dd4ffa5e44d59d4008a2627aa2f02b6f Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Wed, 8 Jun 2005 15:33:43 +1000 Subject: [PATCH 059/160] [PATCH] ppc64 kprobes: don't eat dabr/iabr exceptions Kprobes was eating the hardware instruction and data address breakpoint exceptions. This patch fixes it; kprobes doesn't use those exceptions at all and should ignore them. Signed-off-by: Ananth N Mavinakayanahalli Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/kprobes.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index 103daaf73573..5a9f47b18c45 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -233,8 +233,6 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, */ preempt_disable(); switch (val) { - case DIE_IABR_MATCH: - case DIE_DABR_MATCH: case DIE_BPT: if (kprobe_handler(args->regs)) ret = NOTIFY_STOP; From ad597bd518559f59ede8d01262cdf4467e13282e Mon Sep 17 00:00:00 2001 From: David Mosberger-Tang Date: Wed, 8 Jun 2005 10:45:00 -0700 Subject: [PATCH 060/160] [IA64] Fill holes in FIXADDR_USER space with zero pages. This fixes an oops reported by Jason Baron. Signed-off-by: David Mosberger-Tang Signed-off-by: Tony Luck --- arch/ia64/mm/init.c | 19 +++++++++++++++++-- include/asm-ia64/pgtable.h | 8 ++++++-- 2 files changed, 23 insertions(+), 4 deletions(-) diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 547785e3cba2..4eb2f52b87a1 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -305,8 +305,9 @@ setup_gate (void) struct page *page; /* - * Map the gate page twice: once read-only to export the ELF headers etc. and once - * execute-only page to enable privilege-promotion via "epc": + * Map the gate page twice: once read-only to export the ELF + * headers etc. and once execute-only page to enable + * privilege-promotion via "epc": */ page = virt_to_page(ia64_imva(__start_gate_section)); put_kernel_page(page, GATE_ADDR, PAGE_READONLY); @@ -315,6 +316,20 @@ setup_gate (void) put_kernel_page(page, GATE_ADDR + PAGE_SIZE, PAGE_GATE); #else put_kernel_page(page, GATE_ADDR + PERCPU_PAGE_SIZE, PAGE_GATE); + /* Fill in the holes (if any) with read-only zero pages: */ + { + unsigned long addr; + + for (addr = GATE_ADDR + PAGE_SIZE; + addr < GATE_ADDR + PERCPU_PAGE_SIZE; + addr += PAGE_SIZE) + { + put_kernel_page(ZERO_PAGE(0), addr, + PAGE_READONLY); + put_kernel_page(ZERO_PAGE(0), addr + PERCPU_PAGE_SIZE, + PAGE_READONLY); + } + } #endif ia64_patch_gate(); } diff --git a/include/asm-ia64/pgtable.h b/include/asm-ia64/pgtable.h index ea121a002309..fcc9c3344ab4 100644 --- a/include/asm-ia64/pgtable.h +++ b/include/asm-ia64/pgtable.h @@ -8,7 +8,7 @@ * This hopefully works with any (fixed) IA-64 page-size, as defined * in . * - * Copyright (C) 1998-2004 Hewlett-Packard Co + * Copyright (C) 1998-2005 Hewlett-Packard Co * David Mosberger-Tang */ @@ -551,7 +551,11 @@ do { \ /* These tell get_user_pages() that the first gate page is accessible from user-level. */ #define FIXADDR_USER_START GATE_ADDR -#define FIXADDR_USER_END (GATE_ADDR + 2*PERCPU_PAGE_SIZE) +#ifdef HAVE_BUGGY_SEGREL +# define FIXADDR_USER_END (GATE_ADDR + 2*PAGE_SIZE) +#else +# define FIXADDR_USER_END (GATE_ADDR + 2*PERCPU_PAGE_SIZE) +#endif #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY From 57cfa5e97ff60d909a7e0a5f6e4d0a49aa3e2aec Mon Sep 17 00:00:00 2001 From: Giorgio Padrin Date: Wed, 8 Jun 2005 19:00:15 +0100 Subject: [PATCH 061/160] [PATCH] ARM: 2703/1: pxa-regs.h: complete I2S GPIO alternate functions for PXA27x Patch from Giorgio Padrin The patch completes I2S GPIO alternate functions for PXA27x, adding I2S_SYSCLK. File: pxa-regs.h . Signed-off-by: Giorgio Padrin Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa-regs.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 39741d3c9a34..b5e54a9e9fa7 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1296,6 +1296,7 @@ #define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */ #define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */ #define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ +#define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */ #define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ /* GPIO alternate function mode & direction */ @@ -1428,6 +1429,7 @@ #define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT) #define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT) #define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) +#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) #define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) #define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_OUT) #define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) From aeabbbbe126f3d5e61e2db07629443cd10932bb2 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 8 Jun 2005 19:00:16 +0100 Subject: [PATCH 062/160] [PATCH] ARM: 2705/1: fix writesw for misaligned source pointer Patch from Nicolas Pitre Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/lib/io-writesw-armv4.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S index 6d1d7c27806e..5e240e452af6 100644 --- a/arch/arm/lib/io-writesw-armv4.S +++ b/arch/arm/lib/io-writesw-armv4.S @@ -87,9 +87,9 @@ ENTRY(__raw_writesw) subs r2, r2, #2 orr ip, ip, r3, push_hbyte1 strh ip, [r0] - bpl 2b + bpl 1b -3: tst r2, #1 -2: movne ip, r3, lsr #8 + tst r2, #1 +3: movne ip, r3, lsr #8 strneh ip, [r0] mov pc, lr From dcef1f634657dabe7905af3ccda12cf7f0b6fcc1 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 8 Jun 2005 19:00:47 +0100 Subject: [PATCH 063/160] [PATCH] ARM: 2664/2: add support for atomic ops on pre-ARMv6 SMP systems Patch from Nicolas Pitre Not that there might be many of them on the planet, but at least RMK apparently has one. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 16 ++++++++---- arch/arm/kernel/traps.c | 49 ++++++++++++++++++++++++++++++++++++ arch/arm/mm/Kconfig | 8 ++++++ 3 files changed, 68 insertions(+), 5 deletions(-) diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 4eb36155dc93..e14278d59882 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -269,7 +269,7 @@ __pabt_svc: add r5, sp, #S_PC ldmia r7, {r2 - r4} @ Get USR pc, cpsr -#if __LINUX_ARM_ARCH__ < 6 +#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) @ make sure our user space atomic helper is aborted cmp r2, #VIRT_OFFSET bichs r3, r3, #PSR_Z_BIT @@ -616,11 +616,17 @@ __kuser_helper_start: __kuser_cmpxchg: @ 0xffff0fc0 -#if __LINUX_ARM_ARCH__ < 6 +#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) -#ifdef CONFIG_SMP /* sanity check */ -#error "CONFIG_SMP on a machine supporting pre-ARMv6 processors?" -#endif + /* + * Poor you. No fast solution possible... + * The kernel itself must perform the operation. + * A special ghost syscall is used for that (see traps.c). + */ + swi #0x9ffff0 + mov pc, lr + +#elif __LINUX_ARM_ARCH__ < 6 /* * Theory of operation: diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 14df16b983f4..45d2a032d890 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -464,6 +464,55 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) #endif return 0; +#ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG + /* + * Atomically store r1 in *r2 if *r2 is equal to r0 for user space. + * Return zero in r0 if *MEM was changed or non-zero if no exchange + * happened. Also set the user C flag accordingly. + * If access permissions have to be fixed up then non-zero is + * returned and the operation has to be re-attempted. + * + * *NOTE*: This is a ghost syscall private to the kernel. Only the + * __kuser_cmpxchg code in entry-armv.S should be aware of its + * existence. Don't ever use this from user code. + */ + case 0xfff0: + { + extern void do_DataAbort(unsigned long addr, unsigned int fsr, + struct pt_regs *regs); + unsigned long val; + unsigned long addr = regs->ARM_r2; + struct mm_struct *mm = current->mm; + pgd_t *pgd; pmd_t *pmd; pte_t *pte; + + regs->ARM_cpsr &= ~PSR_C_BIT; + spin_lock(&mm->page_table_lock); + pgd = pgd_offset(mm, addr); + if (!pgd_present(*pgd)) + goto bad_access; + pmd = pmd_offset(pgd, addr); + if (!pmd_present(*pmd)) + goto bad_access; + pte = pte_offset_map(pmd, addr); + if (!pte_present(*pte) || !pte_write(*pte)) + goto bad_access; + val = *(unsigned long *)addr; + val -= regs->ARM_r0; + if (val == 0) { + *(unsigned long *)addr = regs->ARM_r1; + regs->ARM_cpsr |= PSR_C_BIT; + } + spin_unlock(&mm->page_table_lock); + return val; + + bad_access: + spin_unlock(&mm->page_table_lock); + /* simulate a read access fault */ + do_DataAbort(addr, 15 + (1 << 11), regs); + return -1; + } +#endif + default: /* Calls 9f00xx..9f07ff are defined to return -ENOSYS if not implemented, rather than raising SIGILL. This diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index ade0e2222f59..3fefb43c67f7 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -422,3 +422,11 @@ config HAS_TLS_REG assume directly accessing that register and always obtain the expected value only on ARMv7 and above. +config NEEDS_SYSCALL_FOR_CMPXCHG + bool + default y if SMP && (CPU_32v5 || CPU_32v4 || CPU_32v3) + help + SMP on a pre-ARMv6 processor? Well OK then. + Forget about fast user space cmpxchg support. + It is just not possible. + From ff39bc772ad18d8c7f9334926053b718d7932de0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 8 Jun 2005 19:26:47 +0100 Subject: [PATCH 064/160] [PATCH] Serial: remove unused variable in sa1100 driver Signed-off-by: Russell King --- drivers/serial/sa1100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index 22565a67a57c..98641c3f5ab9 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -197,7 +197,7 @@ static void sa1100_rx_chars(struct sa1100_port *sport, struct pt_regs *regs) { struct tty_struct *tty = sport->port.info->tty; - unsigned int status, ch, flg, ignored = 0; + unsigned int status, ch, flg; status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) | UTSR0_TO_SM(UART_GET_UTSR0(sport)); From 866ba633a81c1e179038f7527809d9513160a6f7 Mon Sep 17 00:00:00 2001 From: Keith Owens Date: Mon, 6 Jun 2005 02:04:00 -0700 Subject: [PATCH 065/160] [IA64] Module gp must point to valid memory Some bits of the kernel assume that gp always points to valid memory, in particular PHYSICAL_MODE_ENTER() assumes that both gp and sp are valid virtual addresses with associated physical pages. The IA64 module loader puts gp well past the end of the module, with no physical backing. Offsets on gp are still valid, but physical mode addressing breaks for modules. Ensure that gp always falls within the module body. Also ensure that gp is 8 byte aligned. Signed-off-by: Keith Owens Signed-off-by: Tony Luck --- arch/ia64/kernel/module.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c index febc091c2f02..f1aca7cffd12 100644 --- a/arch/ia64/kernel/module.c +++ b/arch/ia64/kernel/module.c @@ -825,14 +825,16 @@ apply_relocate_add (Elf64_Shdr *sechdrs, const char *strtab, unsigned int symind * XXX Should have an arch-hook for running this after final section * addresses have been selected... */ - /* See if gp can cover the entire core module: */ - uint64_t gp = (uint64_t) mod->module_core + MAX_LTOFF / 2; - if (mod->core_size >= MAX_LTOFF) + uint64_t gp; + if (mod->core_size > MAX_LTOFF) /* * This takes advantage of fact that SHF_ARCH_SMALL gets allocated * at the end of the module. */ - gp = (uint64_t) mod->module_core + mod->core_size - MAX_LTOFF / 2; + gp = mod->core_size - MAX_LTOFF / 2; + else + gp = mod->core_size / 2; + gp = (uint64_t) mod->module_core + ((gp + 7) & -8); mod->arch.gp = gp; DEBUGP("%s: placing gp at 0x%lx\n", __FUNCTION__, gp); } From 86ebacd360767f6a5cf9c8810977593dccf3f3da Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Wed, 8 Jun 2005 12:12:48 -0700 Subject: [PATCH 066/160] [IA64] Update comment to describe modes set in default control register. Christian Hildner pointed out that the comment did not match what the code does in cpu_init() when we set up the default control register. Patch based on suggestions from Ken Chen. Signed-off-by: Tony Luck --- arch/ia64/kernel/setup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index b7e6b4cb374b..d14692e0920a 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -720,7 +720,8 @@ cpu_init (void) ia64_set_kr(IA64_KR_PT_BASE, __pa(ia64_imva(empty_zero_page))); /* - * Initialize default control register to defer all speculative faults. The + * Initialize default control register to defer speculative faults except + * for those arising from TLB misses, which are not deferred. The * kernel MUST NOT depend on a particular setting of these bits (in other words, * the kernel must have recovery code for all speculative accesses). Turn on * dcr.lc as per recommendation by the architecture team. Most IA-32 apps From 70aa488cff83c965c9e1850f48d82b000d0d6c1c Mon Sep 17 00:00:00 2001 From: Keith Owens Date: Fri, 27 May 2005 23:09:00 -0700 Subject: [PATCH 067/160] [IA64] Extract correct break number for break.b break.b does not store the break number in cr.iim, instead it stores 0, which makes all break.b instructions look like BUG(). Extract the break number from the instruction itself. Signed-off-by: Keith Owens Signed-off-by: Tony Luck --- arch/ia64/kernel/traps.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c index e82ad78081b3..9bad6652d531 100644 --- a/arch/ia64/kernel/traps.c +++ b/arch/ia64/kernel/traps.c @@ -111,6 +111,24 @@ ia64_bad_break (unsigned long break_num, struct pt_regs *regs) siginfo_t siginfo; int sig, code; + /* break.b always sets cr.iim to 0, which causes problems for + * debuggers. Get the real break number from the original instruction, + * but only for kernel code. User space break.b is left alone, to + * preserve the existing behaviour. All break codings have the same + * format, so there is no need to check the slot type. + */ + if (break_num == 0 && !user_mode(regs)) { + struct ia64_psr *ipsr = ia64_psr(regs); + unsigned long *bundle = (unsigned long *)regs->cr_iip; + unsigned long slot; + switch (ipsr->ri) { + case 0: slot = (bundle[0] >> 5); break; + case 1: slot = (bundle[0] >> 46) | (bundle[1] << 18); break; + default: slot = (bundle[1] >> 23); break; + } + break_num = ((slot >> 36 & 1) << 20) | (slot >> 6 & 0xfffff); + } + /* SIGILL, SIGFPE, SIGSEGV, and SIGBUS want these field initialized: */ siginfo.si_addr = (void __user *) (regs->cr_iip + ia64_psr(regs)->ri); siginfo.si_imm = break_num; From 6d1cfbab4de64f2d0c5b0f81177ade0d75b69288 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 8 Jun 2005 14:13:14 -0700 Subject: [PATCH 068/160] [TG3]: Fix 5700/5701 DMA corruption on Apple G4. Fix 5700/5701 DMA write corruption on Apple G4 by detecting the Apple UniNorth PCI 1.5 chipset and adjusting the DMA write boundary to 16. DMA test fails to detect the problem with this chipset. Thanks to Manuel Perez Ayala for reporting the problem and helping to debug it. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 18 ++++++++++++++++-- include/linux/pci_ids.h | 1 + 2 files changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index e944aac258e3..77337c3b4285 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -9695,10 +9695,24 @@ static int __devinit tg3_test_dma(struct tg3 *tp) } if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) != DMA_RWCTRL_WRITE_BNDRY_16) { + static struct pci_device_id dma_wait_state_chipsets[] = { + { PCI_DEVICE(PCI_VENDOR_ID_APPLE, + PCI_DEVICE_ID_APPLE_UNI_N_PCI15) }, + { }, + }; + /* DMA test passed without adjusting DMA boundary, - * just restore the calculated DMA boundary + * now look for chipsets that are known to expose the + * DMA bug without failing the test. */ - tp->dma_rwctrl = saved_dma_rwctrl; + if (pci_dev_present(dma_wait_state_chipsets)) { + tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK; + tp->dma_rwctrl |= DMA_RWCTRL_WRITE_BNDRY_16; + } + else + /* Safe to use the calculated DMA boundary. */ + tp->dma_rwctrl = saved_dma_rwctrl; + tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl); } diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 18f734ec9181..b8b4ebf9abf1 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -874,6 +874,7 @@ #define PCI_DEVICE_ID_APPLE_KL_USB_P 0x0026 #define PCI_DEVICE_ID_APPLE_UNI_N_AGP_P 0x0027 #define PCI_DEVICE_ID_APPLE_UNI_N_AGP15 0x002d +#define PCI_DEVICE_ID_APPLE_UNI_N_PCI15 0x002e #define PCI_DEVICE_ID_APPLE_UNI_N_FW2 0x0030 #define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2 0x0032 #define PCI_DEVIEC_ID_APPLE_UNI_N_ATA 0x0033 From ed7fce6c13bdd802817e1988d67047d432e7e30b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 8 Jun 2005 14:15:52 -0700 Subject: [PATCH 069/160] [TG3]: Update driver version and release date. Signed-off-by: David S. Miller --- drivers/net/tg3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 77337c3b4285..a0b8848049c9 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -66,8 +66,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.30" -#define DRV_MODULE_RELDATE "June 6, 2005" +#define DRV_MODULE_VERSION "3.31" +#define DRV_MODULE_RELDATE "June 8, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 From 8181b8c1f3a69fe5abcc51cb732eb512ccd1566a Mon Sep 17 00:00:00 2001 From: Gabor Fekete Date: Wed, 8 Jun 2005 14:54:38 -0700 Subject: [PATCH 070/160] [IPV6]: Update parm.link in ip6ip6_tnl_change() Signed-off-by: Gabor Fekete Signed-off-by: David S. Miller --- net/ipv6/ip6_tunnel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index 3b1c9fa184ae..ba3b0c267f75 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -882,6 +882,7 @@ ip6ip6_tnl_change(struct ip6_tnl *t, struct ip6_tnl_parm *p) t->parms.hop_limit = p->hop_limit; t->parms.encap_limit = p->encap_limit; t->parms.flowinfo = p->flowinfo; + t->parms.link = p->link; ip6ip6_tnl_link_config(t); return 0; } From 699a411451a32cc111410f44f172b265f6d679c8 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 8 Jun 2005 14:55:42 -0700 Subject: [PATCH 071/160] [NET]: Allow controlling NAPI device weight with sysfs Simple interface to allow changing network device scheduling weight with sysfs. Please consider this for 2.6.12, since risk/impact is small. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/core/net-sysfs.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index 910eb4c05a47..e2137f3e489d 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -185,6 +185,22 @@ static ssize_t store_tx_queue_len(struct class_device *dev, const char *buf, siz static CLASS_DEVICE_ATTR(tx_queue_len, S_IRUGO | S_IWUSR, show_tx_queue_len, store_tx_queue_len); +NETDEVICE_SHOW(weight, fmt_dec); + +static int change_weight(struct net_device *net, unsigned long new_weight) +{ + net->weight = new_weight; + return 0; +} + +static ssize_t store_weight(struct class_device *dev, const char *buf, size_t len) +{ + return netdev_store(dev, buf, len, change_weight); +} + +static CLASS_DEVICE_ATTR(weight, S_IRUGO | S_IWUSR, show_weight, + store_weight); + static struct class_device_attribute *net_class_attributes[] = { &class_device_attr_ifindex, @@ -194,6 +210,7 @@ static struct class_device_attribute *net_class_attributes[] = { &class_device_attr_features, &class_device_attr_mtu, &class_device_attr_flags, + &class_device_attr_weight, &class_device_attr_type, &class_device_attr_address, &class_device_attr_broadcast, From e3876605450979fe52a1a03e7eb78a89bf59e76a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 8 Jun 2005 14:56:01 -0700 Subject: [PATCH 072/160] [NET]: Fix sysctl net.core.dev_weight Changing the sysctl net.core.dev_weight has no effect because the weight of the backlog devices is set during initialization and never changed. This patch propagates any changes to the global value affected by sysctl to the per-cpu devices. It is done every time the packet handler function is run. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/core/dev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/dev.c b/net/core/dev.c index f15a3ffff635..ab935778ce81 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1744,6 +1744,7 @@ static int process_backlog(struct net_device *backlog_dev, int *budget) struct softnet_data *queue = &__get_cpu_var(softnet_data); unsigned long start_time = jiffies; + backlog_dev->weight = weight_p; for (;;) { struct sk_buff *skb; struct net_device *dev; From b824979aeccbfd997e6e5dbe75c47d586b5a2923 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Wed, 8 Jun 2005 15:10:22 -0700 Subject: [PATCH 073/160] [PKT_SCHED]: Fix typo in NET_EMATCH_STACK help text Spotted by Geert Uytterhoeven . Signed-off-by: Thomas Graf Signed-off-by: David S. Miller --- net/sched/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/Kconfig b/net/sched/Kconfig index b0941186f867..b22c9beb604d 100644 --- a/net/sched/Kconfig +++ b/net/sched/Kconfig @@ -405,7 +405,7 @@ config NET_EMATCH_STACK ---help--- Size of the local stack variable used while evaluating the tree of ematches. Limits the depth of the tree, i.e. the number of - encapsulated precedences. Every level requires 4 bytes of addtional + encapsulated precedences. Every level requires 4 bytes of additional stack space. config NET_EMATCH_CMP From 4890062960cbc4d3cebdbd8261a68bc85efcf5d4 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Wed, 8 Jun 2005 15:10:48 -0700 Subject: [PATCH 074/160] [PKT_SCHED]: Allow socket attributes to be matched on via meta ematch Adds meta collectors for all socket attributes that make sense to be filtered upon. Some of them are only useful for debugging but having them doesn't hurt. Signed-off-by: Thomas Graf Signed-off-by: David S. Miller --- include/linux/tc_ematch/tc_em_meta.h | 30 +++ net/sched/em_meta.c | 291 ++++++++++++++++++++++++--- 2 files changed, 297 insertions(+), 24 deletions(-) diff --git a/include/linux/tc_ematch/tc_em_meta.h b/include/linux/tc_ematch/tc_em_meta.h index aa6b48bb4dcd..a6b2cc530af5 100644 --- a/include/linux/tc_ematch/tc_em_meta.h +++ b/include/linux/tc_ematch/tc_em_meta.h @@ -56,6 +56,36 @@ enum TCF_META_ID_TCCLASSID, TCF_META_ID_RTCLASSID, TCF_META_ID_RTIIF, + TCF_META_ID_SK_FAMILY, + TCF_META_ID_SK_STATE, + TCF_META_ID_SK_REUSE, + TCF_META_ID_SK_BOUND_IF, + TCF_META_ID_SK_REFCNT, + TCF_META_ID_SK_SHUTDOWN, + TCF_META_ID_SK_PROTO, + TCF_META_ID_SK_TYPE, + TCF_META_ID_SK_RCVBUF, + TCF_META_ID_SK_RMEM_ALLOC, + TCF_META_ID_SK_WMEM_ALLOC, + TCF_META_ID_SK_OMEM_ALLOC, + TCF_META_ID_SK_WMEM_QUEUED, + TCF_META_ID_SK_RCV_QLEN, + TCF_META_ID_SK_SND_QLEN, + TCF_META_ID_SK_ERR_QLEN, + TCF_META_ID_SK_FORWARD_ALLOCS, + TCF_META_ID_SK_SNDBUF, + TCF_META_ID_SK_ALLOCS, + TCF_META_ID_SK_ROUTE_CAPS, + TCF_META_ID_SK_HASHENT, + TCF_META_ID_SK_LINGERTIME, + TCF_META_ID_SK_ACK_BACKLOG, + TCF_META_ID_SK_MAX_ACK_BACKLOG, + TCF_META_ID_SK_PRIO, + TCF_META_ID_SK_RCVLOWAT, + TCF_META_ID_SK_RCVTIMEO, + TCF_META_ID_SK_SNDTIMEO, + TCF_META_ID_SK_SENDMSG_OFF, + TCF_META_ID_SK_WRITE_PENDING, __TCF_META_ID_MAX }; #define TCF_META_ID_MAX (__TCF_META_ID_MAX - 1) diff --git a/net/sched/em_meta.c b/net/sched/em_meta.c index f1eeaf65cee5..ed2a46cbb67f 100644 --- a/net/sched/em_meta.c +++ b/net/sched/em_meta.c @@ -32,7 +32,7 @@ * +-----------+ +-----------+ * | | * ---> meta_ops[INT][INDEV](...) | - * | | + * | | * ----------- | * V V * +-----------+ +-----------+ @@ -70,6 +70,7 @@ #include #include #include +#include struct meta_obj { @@ -283,6 +284,214 @@ META_COLLECTOR(int_rtiif) dst->value = ((struct rtable*) skb->dst)->fl.iif; } +/************************************************************************** + * Socket Attributes + **************************************************************************/ + +#define SKIP_NONLOCAL(skb) \ + if (unlikely(skb->sk == NULL)) { \ + *err = -1; \ + return; \ + } + +META_COLLECTOR(int_sk_family) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_family; +} + +META_COLLECTOR(int_sk_state) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_state; +} + +META_COLLECTOR(int_sk_reuse) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_reuse; +} + +META_COLLECTOR(int_sk_bound_if) +{ + SKIP_NONLOCAL(skb); + /* No error if bound_dev_if is 0, legal userspace check */ + dst->value = skb->sk->sk_bound_dev_if; +} + +META_COLLECTOR(var_sk_bound_if) +{ + SKIP_NONLOCAL(skb); + + if (skb->sk->sk_bound_dev_if == 0) { + dst->value = (unsigned long) "any"; + dst->len = 3; + } else { + struct net_device *dev; + + dev = dev_get_by_index(skb->sk->sk_bound_dev_if); + *err = var_dev(dev, dst); + if (dev) + dev_put(dev); + } +} + +META_COLLECTOR(int_sk_refcnt) +{ + SKIP_NONLOCAL(skb); + dst->value = atomic_read(&skb->sk->sk_refcnt); +} + +META_COLLECTOR(int_sk_rcvbuf) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_rcvbuf; +} + +META_COLLECTOR(int_sk_shutdown) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_shutdown; +} + +META_COLLECTOR(int_sk_proto) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_protocol; +} + +META_COLLECTOR(int_sk_type) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_type; +} + +META_COLLECTOR(int_sk_rmem_alloc) +{ + SKIP_NONLOCAL(skb); + dst->value = atomic_read(&skb->sk->sk_rmem_alloc); +} + +META_COLLECTOR(int_sk_wmem_alloc) +{ + SKIP_NONLOCAL(skb); + dst->value = atomic_read(&skb->sk->sk_wmem_alloc); +} + +META_COLLECTOR(int_sk_omem_alloc) +{ + SKIP_NONLOCAL(skb); + dst->value = atomic_read(&skb->sk->sk_omem_alloc); +} + +META_COLLECTOR(int_sk_rcv_qlen) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_receive_queue.qlen; +} + +META_COLLECTOR(int_sk_snd_qlen) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_write_queue.qlen; +} + +META_COLLECTOR(int_sk_wmem_queued) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_wmem_queued; +} + +META_COLLECTOR(int_sk_fwd_alloc) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_forward_alloc; +} + +META_COLLECTOR(int_sk_sndbuf) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_sndbuf; +} + +META_COLLECTOR(int_sk_alloc) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_allocation; +} + +META_COLLECTOR(int_sk_route_caps) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_route_caps; +} + +META_COLLECTOR(int_sk_hashent) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_hashent; +} + +META_COLLECTOR(int_sk_lingertime) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_lingertime / HZ; +} + +META_COLLECTOR(int_sk_err_qlen) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_error_queue.qlen; +} + +META_COLLECTOR(int_sk_ack_bl) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_ack_backlog; +} + +META_COLLECTOR(int_sk_max_ack_bl) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_max_ack_backlog; +} + +META_COLLECTOR(int_sk_prio) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_priority; +} + +META_COLLECTOR(int_sk_rcvlowat) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_rcvlowat; +} + +META_COLLECTOR(int_sk_rcvtimeo) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_rcvtimeo / HZ; +} + +META_COLLECTOR(int_sk_sndtimeo) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_sndtimeo / HZ; +} + +META_COLLECTOR(int_sk_sendmsg_off) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_sndmsg_off; +} + +META_COLLECTOR(int_sk_write_pend) +{ + SKIP_NONLOCAL(skb); + dst->value = skb->sk->sk_write_pending; +} + /************************************************************************** * Meta value collectors assignment table **************************************************************************/ @@ -293,41 +502,75 @@ struct meta_ops struct meta_value *, struct meta_obj *, int *); }; +#define META_ID(name) TCF_META_ID_##name +#define META_FUNC(name) { .get = meta_##name } + /* Meta value operations table listing all meta value collectors and * assigns them to a type and meta id. */ static struct meta_ops __meta_ops[TCF_META_TYPE_MAX+1][TCF_META_ID_MAX+1] = { [TCF_META_TYPE_VAR] = { - [TCF_META_ID_DEV] = { .get = meta_var_dev }, - [TCF_META_ID_INDEV] = { .get = meta_var_indev }, - [TCF_META_ID_REALDEV] = { .get = meta_var_realdev } + [META_ID(DEV)] = META_FUNC(var_dev), + [META_ID(INDEV)] = META_FUNC(var_indev), + [META_ID(REALDEV)] = META_FUNC(var_realdev), + [META_ID(SK_BOUND_IF)] = META_FUNC(var_sk_bound_if), }, [TCF_META_TYPE_INT] = { - [TCF_META_ID_RANDOM] = { .get = meta_int_random }, - [TCF_META_ID_LOADAVG_0] = { .get = meta_int_loadavg_0 }, - [TCF_META_ID_LOADAVG_1] = { .get = meta_int_loadavg_1 }, - [TCF_META_ID_LOADAVG_2] = { .get = meta_int_loadavg_2 }, - [TCF_META_ID_DEV] = { .get = meta_int_dev }, - [TCF_META_ID_INDEV] = { .get = meta_int_indev }, - [TCF_META_ID_REALDEV] = { .get = meta_int_realdev }, - [TCF_META_ID_PRIORITY] = { .get = meta_int_priority }, - [TCF_META_ID_PROTOCOL] = { .get = meta_int_protocol }, - [TCF_META_ID_SECURITY] = { .get = meta_int_security }, - [TCF_META_ID_PKTTYPE] = { .get = meta_int_pkttype }, - [TCF_META_ID_PKTLEN] = { .get = meta_int_pktlen }, - [TCF_META_ID_DATALEN] = { .get = meta_int_datalen }, - [TCF_META_ID_MACLEN] = { .get = meta_int_maclen }, + [META_ID(RANDOM)] = META_FUNC(int_random), + [META_ID(LOADAVG_0)] = META_FUNC(int_loadavg_0), + [META_ID(LOADAVG_1)] = META_FUNC(int_loadavg_1), + [META_ID(LOADAVG_2)] = META_FUNC(int_loadavg_2), + [META_ID(DEV)] = META_FUNC(int_dev), + [META_ID(INDEV)] = META_FUNC(int_indev), + [META_ID(REALDEV)] = META_FUNC(int_realdev), + [META_ID(PRIORITY)] = META_FUNC(int_priority), + [META_ID(PROTOCOL)] = META_FUNC(int_protocol), + [META_ID(SECURITY)] = META_FUNC(int_security), + [META_ID(PKTTYPE)] = META_FUNC(int_pkttype), + [META_ID(PKTLEN)] = META_FUNC(int_pktlen), + [META_ID(DATALEN)] = META_FUNC(int_datalen), + [META_ID(MACLEN)] = META_FUNC(int_maclen), #ifdef CONFIG_NETFILTER - [TCF_META_ID_NFMARK] = { .get = meta_int_nfmark }, + [META_ID(NFMARK)] = META_FUNC(int_nfmark), #endif - [TCF_META_ID_TCINDEX] = { .get = meta_int_tcindex }, + [META_ID(TCINDEX)] = META_FUNC(int_tcindex), #ifdef CONFIG_NET_CLS_ACT - [TCF_META_ID_TCVERDICT] = { .get = meta_int_tcverd }, - [TCF_META_ID_TCCLASSID] = { .get = meta_int_tcclassid }, + [META_ID(TCVERDICT)] = META_FUNC(int_tcverd), + [META_ID(TCCLASSID)] = META_FUNC(int_tcclassid), #endif #ifdef CONFIG_NET_CLS_ROUTE - [TCF_META_ID_RTCLASSID] = { .get = meta_int_rtclassid }, + [META_ID(RTCLASSID)] = META_FUNC(int_rtclassid), #endif - [TCF_META_ID_RTIIF] = { .get = meta_int_rtiif } + [META_ID(RTIIF)] = META_FUNC(int_rtiif), + [META_ID(SK_FAMILY)] = META_FUNC(int_sk_family), + [META_ID(SK_STATE)] = META_FUNC(int_sk_state), + [META_ID(SK_REUSE)] = META_FUNC(int_sk_reuse), + [META_ID(SK_BOUND_IF)] = META_FUNC(int_sk_bound_if), + [META_ID(SK_REFCNT)] = META_FUNC(int_sk_refcnt), + [META_ID(SK_RCVBUF)] = META_FUNC(int_sk_rcvbuf), + [META_ID(SK_SNDBUF)] = META_FUNC(int_sk_sndbuf), + [META_ID(SK_SHUTDOWN)] = META_FUNC(int_sk_shutdown), + [META_ID(SK_PROTO)] = META_FUNC(int_sk_proto), + [META_ID(SK_TYPE)] = META_FUNC(int_sk_type), + [META_ID(SK_RMEM_ALLOC)] = META_FUNC(int_sk_rmem_alloc), + [META_ID(SK_WMEM_ALLOC)] = META_FUNC(int_sk_wmem_alloc), + [META_ID(SK_OMEM_ALLOC)] = META_FUNC(int_sk_omem_alloc), + [META_ID(SK_WMEM_QUEUED)] = META_FUNC(int_sk_wmem_queued), + [META_ID(SK_RCV_QLEN)] = META_FUNC(int_sk_rcv_qlen), + [META_ID(SK_SND_QLEN)] = META_FUNC(int_sk_snd_qlen), + [META_ID(SK_ERR_QLEN)] = META_FUNC(int_sk_err_qlen), + [META_ID(SK_FORWARD_ALLOCS)] = META_FUNC(int_sk_fwd_alloc), + [META_ID(SK_ALLOCS)] = META_FUNC(int_sk_alloc), + [META_ID(SK_ROUTE_CAPS)] = META_FUNC(int_sk_route_caps), + [META_ID(SK_HASHENT)] = META_FUNC(int_sk_hashent), + [META_ID(SK_LINGERTIME)] = META_FUNC(int_sk_lingertime), + [META_ID(SK_ACK_BACKLOG)] = META_FUNC(int_sk_ack_bl), + [META_ID(SK_MAX_ACK_BACKLOG)] = META_FUNC(int_sk_max_ack_bl), + [META_ID(SK_PRIO)] = META_FUNC(int_sk_prio), + [META_ID(SK_RCVLOWAT)] = META_FUNC(int_sk_rcvlowat), + [META_ID(SK_RCVTIMEO)] = META_FUNC(int_sk_rcvtimeo), + [META_ID(SK_SNDTIMEO)] = META_FUNC(int_sk_sndtimeo), + [META_ID(SK_SENDMSG_OFF)] = META_FUNC(int_sk_sendmsg_off), + [META_ID(SK_WRITE_PENDING)] = META_FUNC(int_sk_write_pend), } }; From e1e284a4bd827db2288af9536664b44590e419eb Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Wed, 8 Jun 2005 15:11:02 -0700 Subject: [PATCH 075/160] [PKT_SCHED]: Dump classification result for basic classifier Signed-off-by: Thomas Graf Signed-off-by: David S. Miller --- net/sched/cls_basic.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/sched/cls_basic.c b/net/sched/cls_basic.c index 0d2d4415f334..dfb300bb6baa 100644 --- a/net/sched/cls_basic.c +++ b/net/sched/cls_basic.c @@ -261,6 +261,9 @@ static int basic_dump(struct tcf_proto *tp, unsigned long fh, rta = (struct rtattr *) b; RTA_PUT(skb, TCA_OPTIONS, 0, NULL); + if (f->res.classid) + RTA_PUT(skb, TCA_BASIC_CLASSID, sizeof(u32), &f->res.classid); + if (tcf_exts_dump(skb, &f->exts, &basic_ext_map) < 0 || tcf_em_tree_dump(skb, &f->ematches, TCA_BASIC_EMATCHES) < 0) goto rtattr_failure; From 98e56405521b74b4826f855d45ef7859f34548ff Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Wed, 8 Jun 2005 15:11:19 -0700 Subject: [PATCH 076/160] [PKT_SCHED]: Fix numeric comparison in meta ematch This patch is brought to you by the department of applied stupidity. Signed-off-by: Thomas Graf Signed-off-by: David S. Miller --- net/sched/em_meta.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sched/em_meta.c b/net/sched/em_meta.c index ed2a46cbb67f..48bb23c2a35a 100644 --- a/net/sched/em_meta.c +++ b/net/sched/em_meta.c @@ -639,9 +639,9 @@ static int meta_int_compare(struct meta_obj *a, struct meta_obj *b) /* Let gcc optimize it, the unlikely is not really based on * some numbers but jump free code for mismatches seems * more logical. */ - if (unlikely(a == b)) + if (unlikely(a->value == b->value)) return 0; - else if (a < b) + else if (a->value < b->value) return -1; else return 1; From 3df59529ad1045da61698bb5dd8ebaa547aeb46f Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Wed, 8 Jun 2005 15:47:50 -0700 Subject: [PATCH 077/160] [PATCH] uml: make the emulated iomem driver work on 2.6 This makes the minimal fixes needed to make the UML iomem driver work in 2.6. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/Kconfig_char | 6 ++++++ arch/um/drivers/mmapper_kern.c | 24 ++++++++++++++++++++---- 2 files changed, 26 insertions(+), 4 deletions(-) diff --git a/arch/um/Kconfig_char b/arch/um/Kconfig_char index 3e50fdb67626..62d87b71179b 100644 --- a/arch/um/Kconfig_char +++ b/arch/um/Kconfig_char @@ -204,5 +204,11 @@ config UML_RANDOM http://sourceforge.net/projects/gkernel/). rngd periodically reads /dev/hwrng and injects the entropy into /dev/random. +config MMAPPER + tristate "iomem emulation driver" + help + This driver allows a host file to be used as emulated IO memory inside + UML. + endmenu diff --git a/arch/um/drivers/mmapper_kern.c b/arch/um/drivers/mmapper_kern.c index a63231dffe05..a37a5ac13c22 100644 --- a/arch/um/drivers/mmapper_kern.c +++ b/arch/um/drivers/mmapper_kern.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -117,24 +118,39 @@ static struct file_operations mmapper_fops = { .release = mmapper_release, }; +static struct miscdevice mmapper_dev = { + .minor = MISC_DYNAMIC_MINOR, + .name = "mmapper", + .fops = &mmapper_fops +}; + static int __init mmapper_init(void) { + int err; + printk(KERN_INFO "Mapper v0.1\n"); v_buf = (char *) find_iomem("mmapper", &mmapper_size); if(mmapper_size == 0){ printk(KERN_ERR "mmapper_init - find_iomem failed\n"); - return(0); + goto out; + } + + err = misc_register(&mmapper_dev); + if(err){ + printk(KERN_ERR "mmapper - misc_register failed, err = %d\n", + err); + goto out; } p_buf = __pa(v_buf); - - devfs_mk_cdev(MKDEV(30, 0), S_IFCHR|S_IRUGO|S_IWUGO, "mmapper"); - return(0); +out: + return 0; } static void mmapper_exit(void) { + misc_deregister(&mmapper_dev); } module_init(mmapper_init); From da00d9a5466558ccd9e7b7d04b13d7cb9160c876 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Wed, 8 Jun 2005 15:48:01 -0700 Subject: [PATCH 078/160] [PATCH] uml: compile fixes for gcc 4 This is a bunch of compile fixes provoked by building UML with gcc 4. There are a bunch of signedness mismatches, a couple of uninitialized references, and a botched C99 structure initialization which had somehow gone unnoticed. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/chan_user.c | 4 ++-- arch/um/drivers/net_user.c | 2 +- arch/um/drivers/slip.h | 4 ++-- arch/um/drivers/slip_proto.h | 3 ++- arch/um/drivers/slirp.h | 4 ++-- arch/um/drivers/stderr_console.c | 6 +++--- arch/um/include/mconsole.h | 2 +- arch/um/include/net_user.h | 2 +- arch/um/include/os.h | 2 +- arch/um/include/user_util.h | 3 --- arch/um/os-Linux/elf_aux.c | 6 +++++- arch/um/os-Linux/file.c | 2 +- 12 files changed, 21 insertions(+), 19 deletions(-) diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c index 583b8e137c33..96f3a477c95e 100644 --- a/arch/um/drivers/chan_user.c +++ b/arch/um/drivers/chan_user.c @@ -168,7 +168,7 @@ static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out) printk("winch_tramp : failed to read synchronization byte\n"); printk("read failed, err = %d\n", -n); printk("fd %d will not support SIGWINCH\n", fd); - *fd_out = -1; + pid = -1; } return(pid); } @@ -186,7 +186,7 @@ void register_winch(int fd, struct tty_struct *tty) if(!CHOOSE_MODE_PROC(is_tracer_winch, is_skas_winch, pid, fd, tty) && (pid == -1)){ thread = winch_tramp(fd, tty, &thread_fd); - if(fd != -1){ + if(thread > 0){ register_winch_irq(thread_fd, fd, thread, tty); count = os_write_file(thread_fd, &c, sizeof(c)); diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c index 47229fe4a813..3730d4f12713 100644 --- a/arch/um/drivers/net_user.c +++ b/arch/um/drivers/net_user.c @@ -32,7 +32,7 @@ int tap_open_common(void *dev, char *gate_addr) return(0); } -void tap_check_ips(char *gate_addr, char *eth_addr) +void tap_check_ips(char *gate_addr, unsigned char *eth_addr) { int tap_addr[4]; diff --git a/arch/um/drivers/slip.h b/arch/um/drivers/slip.h index 495f2f1b1420..d523618cd5ac 100644 --- a/arch/um/drivers/slip.h +++ b/arch/um/drivers/slip.h @@ -12,8 +12,8 @@ struct slip_data { char *addr; char *gate_addr; int slave; - char ibuf[ENC_BUF_SIZE]; - char obuf[ENC_BUF_SIZE]; + unsigned char ibuf[ENC_BUF_SIZE]; + unsigned char obuf[ENC_BUF_SIZE]; int more; /* more data: do not read fd until ibuf has been drained */ int pos; int esc; diff --git a/arch/um/drivers/slip_proto.h b/arch/um/drivers/slip_proto.h index 7206361ace45..4c4d94a33100 100644 --- a/arch/um/drivers/slip_proto.h +++ b/arch/um/drivers/slip_proto.h @@ -12,7 +12,8 @@ #define SLIP_ESC_END 0334 /* ESC ESC_END means END 'data' */ #define SLIP_ESC_ESC 0335 /* ESC ESC_ESC means ESC 'data' */ -static inline int slip_unesc(unsigned char c,char *buf,int *pos, int *esc) +static inline int slip_unesc(unsigned char c, unsigned char *buf, int *pos, + int *esc) { int ret; diff --git a/arch/um/drivers/slirp.h b/arch/um/drivers/slirp.h index 04e407d1e44a..afa4e30284fd 100644 --- a/arch/um/drivers/slirp.h +++ b/arch/um/drivers/slirp.h @@ -24,8 +24,8 @@ struct slirp_data { struct arg_list_dummy_wrapper argw; int pid; int slave; - char ibuf[ENC_BUF_SIZE]; - char obuf[ENC_BUF_SIZE]; + unsigned char ibuf[ENC_BUF_SIZE]; + unsigned char obuf[ENC_BUF_SIZE]; int more; /* more data: do not read fd until ibuf has been drained */ int pos; int esc; diff --git a/arch/um/drivers/stderr_console.c b/arch/um/drivers/stderr_console.c index 98565b53d170..429ae8e6c7e5 100644 --- a/arch/um/drivers/stderr_console.c +++ b/arch/um/drivers/stderr_console.c @@ -22,9 +22,9 @@ static void stderr_console_write(struct console *console, const char *string, } static struct console stderr_console = { - .name "stderr", - .write stderr_console_write, - .flags CON_PRINTBUFFER, + .name = "stderr", + .write = stderr_console_write, + .flags = CON_PRINTBUFFER, }; static int __init stderr_console_init(void) diff --git a/arch/um/include/mconsole.h b/arch/um/include/mconsole.h index 9fbe3083fdd8..cfa368e045a5 100644 --- a/arch/um/include/mconsole.h +++ b/arch/um/include/mconsole.h @@ -56,7 +56,7 @@ struct mc_request int as_interrupt; int originating_fd; - int originlen; + unsigned int originlen; unsigned char origin[128]; /* sockaddr_un */ struct mconsole_request request; diff --git a/arch/um/include/net_user.h b/arch/um/include/net_user.h index 36807b796e9f..89885a77a771 100644 --- a/arch/um/include/net_user.h +++ b/arch/um/include/net_user.h @@ -35,7 +35,7 @@ extern void *get_output_buffer(int *len_out); extern void free_output_buffer(void *buffer); extern int tap_open_common(void *dev, char *gate_addr); -extern void tap_check_ips(char *gate_addr, char *eth_addr); +extern void tap_check_ips(char *gate_addr, unsigned char *eth_addr); extern void read_output(int fd, char *output_out, int len); diff --git a/arch/um/include/os.h b/arch/um/include/os.h index d246d5a24609..881d2988d2d8 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -136,7 +136,7 @@ extern int os_seek_file(int fd, __u64 offset); extern int os_open_file(char *file, struct openflags flags, int mode); extern int os_read_file(int fd, void *buf, int len); extern int os_write_file(int fd, const void *buf, int count); -extern int os_file_size(char *file, long long *size_out); +extern int os_file_size(char *file, unsigned long long *size_out); extern int os_file_modtime(char *file, unsigned long *modtime); extern int os_pipe(int *fd, int stream, int close_on_exec); extern int os_set_fd_async(int fd, int owner); diff --git a/arch/um/include/user_util.h b/arch/um/include/user_util.h index b8c5b8a95250..7b6a24dfd302 100644 --- a/arch/um/include/user_util.h +++ b/arch/um/include/user_util.h @@ -41,9 +41,6 @@ extern unsigned long highmem; extern char host_info[]; extern char saved_command_line[]; -extern char command_line[]; - -extern char *tempdir; extern unsigned long _stext, _etext, _sdata, _edata, __bss_start, _end; extern unsigned long _unprotected_end; diff --git a/arch/um/os-Linux/elf_aux.c b/arch/um/os-Linux/elf_aux.c index 9aee0b62ebca..f0d6060e3e57 100644 --- a/arch/um/os-Linux/elf_aux.c +++ b/arch/um/os-Linux/elf_aux.c @@ -45,7 +45,11 @@ __init void scan_elf_aux( char **envp) elf_aux_hwcap = auxv->a_un.a_val; break; case AT_PLATFORM: - elf_aux_platform = auxv->a_un.a_ptr; + /* elf.h removed the pointer elements from + * a_un, so we have to use a_val, which is + * all that's left. + */ + elf_aux_platform = (char *) auxv->a_un.a_val; break; case AT_PAGESZ: page_size = auxv->a_un.a_val; diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c index 77d4066d1af8..fd45bb260907 100644 --- a/arch/um/os-Linux/file.c +++ b/arch/um/os-Linux/file.c @@ -363,7 +363,7 @@ int os_write_file(int fd, const void *buf, int len) (int (*)(int, void *, int)) write, copy_to_user_proc)); } -int os_file_size(char *file, long long *size_out) +int os_file_size(char *file, unsigned long long *size_out) { struct uml_stat buf; int err; From 501cb02b431fb88c7f157c46c8b54de59d1dd463 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Wed, 8 Jun 2005 15:48:13 -0700 Subject: [PATCH 079/160] [PATCH] uml: fix strace -f It turns out that we need to check for pending signals when a newly forked process is run for the first time. With strace -f, strace needs to know about the forked process before it gets going. If it doesn't, then it ptraces some bogus values into its registers, and the process segfaults. So, I added calls to interrupt_end, which does that, plus checks for reschedules. There shouldn't be any of those, but x86 does the same thing, so I'm copying that behavior to be safe. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/skas/process_kern.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/um/kernel/skas/process_kern.c b/arch/um/kernel/skas/process_kern.c index ab5d3271da0b..fc71ef295782 100644 --- a/arch/um/kernel/skas/process_kern.c +++ b/arch/um/kernel/skas/process_kern.c @@ -68,8 +68,11 @@ void new_thread_handler(int sig) * 0 if it just exits */ n = run_kernel_thread(fn, arg, ¤t->thread.exec_buf); - if(n == 1) + if(n == 1){ + /* Handle any immediate reschedules or signals */ + interrupt_end(); userspace(¤t->thread.regs.regs); + } else do_exit(0); } @@ -96,6 +99,8 @@ void fork_handler(int sig) schedule_tail(current->thread.prev_sched); current->thread.prev_sched = NULL; + /* Handle any immediate reschedules or signals */ + interrupt_end(); userspace(¤t->thread.regs.regs); } From 1f96ddb4fb40961a8ebebf7a00bbfaad55aacbd2 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Wed, 8 Jun 2005 15:48:27 -0700 Subject: [PATCH 080/160] [PATCH] uml: clean up error path This cleans an error path which used to leak file descriptors by returning without trying to tidy up. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/chan_user.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c index 96f3a477c95e..5d3768156c92 100644 --- a/arch/um/drivers/chan_user.c +++ b/arch/um/drivers/chan_user.c @@ -143,22 +143,22 @@ static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out) { struct winch_data data; unsigned long stack; - int fds[2], pid, n, err; + int fds[2], n, err; char c; err = os_pipe(fds, 1, 1); if(err < 0){ printk("winch_tramp : os_pipe failed, err = %d\n", -err); - return(err); + goto out; } data = ((struct winch_data) { .pty_fd = fd, .pipe_fd = fds[1], .close_me = fds[0] } ); - pid = run_helper_thread(winch_thread, &data, 0, &stack, 0); - if(pid < 0){ + err = run_helper_thread(winch_thread, &data, 0, &stack, 0); + if(err < 0){ printk("fork of winch_thread failed - errno = %d\n", errno); - return(pid); + goto out_close; } os_close_file(fds[1]); @@ -168,14 +168,22 @@ static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out) printk("winch_tramp : failed to read synchronization byte\n"); printk("read failed, err = %d\n", -n); printk("fd %d will not support SIGWINCH\n", fd); - pid = -1; + err = -EINVAL; + goto out_close1; } - return(pid); + return err ; + + out_close: + os_close_file(fds[1]); + out_close1: + os_close_file(fds[0]); + out: + return err; } void register_winch(int fd, struct tty_struct *tty) { - int pid, thread, thread_fd; + int pid, thread, thread_fd = -1; int count; char c = 1; From beb9e1c3f32a0f878765c7c1142f91083739c5bd Mon Sep 17 00:00:00 2001 From: Eugene Surovegin Date: Wed, 8 Jun 2005 15:48:42 -0700 Subject: [PATCH 081/160] [PATCH] ppc32: add 405EP cpu_spec entry Add a definition for PPC 405EP which was lost somehow during 2.4 -> 2.6 transition. Recent change to arch/ppc/kernel/misc.S ("Fix incorrect CPU_FTR fixup usage for unified caches") triggered this bug and 405EP boards don't boot anymore. Signed-off-by: Eugene Surovegin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/kernel/cputable.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c index d44b7dc5390a..17abf6cd0d90 100644 --- a/arch/ppc/kernel/cputable.c +++ b/arch/ppc/kernel/cputable.c @@ -849,6 +849,17 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, }, + { /* 405EP */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x51210000, + .cpu_name = "405EP", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .icache_bsize = 32, + .dcache_bsize = 32, + }, #endif /* CONFIG_40x */ #ifdef CONFIG_44x From f8acd944ea511af02485b1709c07ac7aac12aa48 Mon Sep 17 00:00:00 2001 From: William Lee Irwin III Date: Wed, 8 Jun 2005 15:48:52 -0700 Subject: [PATCH 082/160] [PATCH] sparc32: silence access_ok() warnings The fact that access_ok() doesn't use some of its arguments trips some unused variable warnings. This patch silences them permanently. Signed-off-by: William Irwin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-sparc/uaccess.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/asm-sparc/uaccess.h b/include/asm-sparc/uaccess.h index f461144067ee..0a780e84a12b 100644 --- a/include/asm-sparc/uaccess.h +++ b/include/asm-sparc/uaccess.h @@ -41,10 +41,11 @@ * No one can read/write anything from userland in the kernel space by setting * large size and address near to PAGE_OFFSET - a fault will break his intentions. */ -#define __user_ok(addr,size) ((addr) < STACK_TOP) +#define __user_ok(addr, size) ({ (void)(size); (addr) < STACK_TOP; }) #define __kernel_ok (segment_eq(get_fs(), KERNEL_DS)) #define __access_ok(addr,size) (__user_ok((addr) & get_fs().seg,(size))) -#define access_ok(type,addr,size) __access_ok((unsigned long)(addr),(size)) +#define access_ok(type, addr, size) \ + ({ (void)(type); __access_ok((unsigned long)(addr), size); }) /* this function will go away soon - use access_ok() instead */ static inline int __deprecated verify_area(int type, const void __user * addr, unsigned long size) From 5754c9b649e414f1e3a3ea2ec15e42ed3e42eeb8 Mon Sep 17 00:00:00 2001 From: Keith Owens Date: Wed, 8 Jun 2005 15:49:07 -0700 Subject: [PATCH 083/160] [PATCH] Stop arch/i386/kernel/vsyscall-note.o being rebuilt every time arch/i386/kernel/vsyscall-note.o is not listed as a target so its .cmd file is neither considered as a target nor is it read on the next build. This causes vsyscall-note.o to be rebuilt every time that you run make, which causes vmlinux to be rebuilt every time. Signed-off-by: Keith Owens Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 0fbcfe00dd8d..51ecd512603d 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -43,7 +43,7 @@ obj-$(CONFIG_SCx200) += scx200.o # Note: kbuild does not track this dependency due to usage of .incbin $(obj)/vsyscall.o: $(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so targets += $(foreach F,int80 sysenter,vsyscall-$F.o vsyscall-$F.so) -targets += vsyscall.lds +targets += vsyscall-note.o vsyscall.lds # The DSO images are built using a special linker script. quiet_cmd_syscall = SYSCALL $@ From 42442ed5744b03f5351a142649b8b4c97e6950ab Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 8 Jun 2005 15:49:25 -0700 Subject: [PATCH 084/160] [PATCH] revert x86_64-use-the-e820-hole-to-map-the-iommu-agp-aperture Martin Bligh determined that this patch is causing his test box to not boot. Revert. Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/aperture.c | 41 ++++++++++------------------------- 1 file changed, 11 insertions(+), 30 deletions(-) diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c index a491f72cc966..504e63474993 100644 --- a/arch/x86_64/kernel/aperture.c +++ b/arch/x86_64/kernel/aperture.c @@ -33,12 +33,10 @@ int fallback_aper_force __initdata = 0; int fix_aperture __initdata = 1; -#define NB_ID_3 (PCI_VENDOR_ID_AMD | (0x1103<<16)) +/* This code runs before the PCI subsystem is initialized, so just + access the northbridge directly. */ -static struct resource aper_res = { - .name = "Aperture", - .flags = IORESOURCE_MEM, -}; +#define NB_ID_3 (PCI_VENDOR_ID_AMD | (0x1103<<16)) static u32 __init allocate_aperture(void) { @@ -55,24 +53,11 @@ static u32 __init allocate_aperture(void) aper_size = (32 * 1024 * 1024) << fallback_aper_order; /* - * Aperture has to be naturally aligned. This means an 2GB - * aperture won't have much chances to find a place in the - * lower 4GB of memory. Unfortunately we cannot move it up - * because that would make the IOMMU useless. + * Aperture has to be naturally aligned. This means an 2GB aperture won't + * have much chances to find a place in the lower 4GB of memory. + * Unfortunately we cannot move it up because that would make the + * IOMMU useless. */ - - /* First try to find some free unused space */ - if (!allocate_resource(&iomem_resource, &aper_res, - aper_size, - 0, 0xffffffff, - aper_size, - NULL, NULL)) { - printk(KERN_INFO "Putting aperture at %lx-%lx\n", - aper_res.start, aper_res.end); - return aper_res.start; - } - - /* No free space found. Go on to waste some memory... */ p = __alloc_bootmem_node(nd0, aper_size, aper_size, 0); if (!p || __pa(p)+aper_size > 0xffffffff) { printk("Cannot allocate aperture memory hole (%p,%uK)\n", @@ -81,7 +66,7 @@ static u32 __init allocate_aperture(void) free_bootmem_node(nd0, (unsigned long)p, aper_size); return 0; } - printk("Mapping aperture over %d KB of precious RAM @ %lx\n", + printk("Mapping aperture over %d KB of RAM @ %lx\n", aper_size >> 10, __pa(p)); return (u32)__pa(p); } @@ -102,16 +87,10 @@ static int __init aperture_valid(char *name, u64 aper_base, u32 aper_size) printk("Aperture from %s pointing to e820 RAM. Ignoring.\n",name); return 0; } - /* Don't check the resource here because the aperture is usually - in an e820 reserved area, and we allocated these earlier. */ return 1; } -/* - * Find a PCI capability. - * This code runs before the PCI subsystem is initialized, so just - * access the northbridge directly. - */ +/* Find a PCI capability */ static __u32 __init find_cap(int num, int slot, int func, int cap) { u8 pos; @@ -276,6 +255,8 @@ void __init iommu_hole_init(void) fallback_aper_force) { printk("Your BIOS doesn't leave a aperture memory hole\n"); printk("Please enable the IOMMU option in the BIOS setup\n"); + printk("This costs you %d MB of RAM\n", + 32 << fallback_aper_order); aper_order = fallback_aper_order; aper_alloc = allocate_aperture(); From 63224d1e8b4cf87cc7420201a8cb3b44b9bf0b40 Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Wed, 8 Jun 2005 15:49:41 -0700 Subject: [PATCH 085/160] [PATCH] ppc64 kprobes: correct kprobe registration return values Add stricter checks during kprobe registration. Return correct error value so insmod doesn't succeed. Also printk reason for registration failure. Signed-off-by: Ananth N Mavinakayanahalli Signed-off-by: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/kprobes.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index 5a9f47b18c45..8f3317244311 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -45,12 +45,17 @@ static struct pt_regs jprobe_saved_regs; int arch_prepare_kprobe(struct kprobe *p) { + int ret = 0; kprobe_opcode_t insn = *p->addr; - if (IS_MTMSRD(insn) || IS_RFID(insn)) - /* cannot put bp on RFID/MTMSRD */ - return 1; - return 0; + if ((unsigned long)p->addr & 0x03) { + printk("Attempt to register kprobe at an unaligned address\n"); + ret = -EINVAL; + } else if (IS_MTMSRD(insn) || IS_RFID(insn)) { + printk("Cannot register a kprobe on rfid or mtmsrd\n"); + ret = -EINVAL; + } + return ret; } void arch_copy_kprobe(struct kprobe *p) From f829fd23c87918374bac0d90404fe12f0e788d52 Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Wed, 8 Jun 2005 15:50:00 -0700 Subject: [PATCH 086/160] [PATCH] ppc64 kprobes: remove spurious MSR_SE masking Remove spurious MSR_SE reset during kprobe processing. single_step_exception() already does it for us. Reset it to be safe when executing the fault_handler. Signed-off-by: Ananth N Mavinakayanahalli Signed-off-by: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/kprobes.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index 8f3317244311..e950a2058a19 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -177,8 +177,6 @@ static void resume_execution(struct kprobe *p, struct pt_regs *regs) ret = emulate_step(regs, p->ainsn.insn[0]); if (ret == 0) regs->nip = (unsigned long)p->addr + 4; - - regs->msr &= ~MSR_SE; } static inline int post_kprobe_handler(struct pt_regs *regs) @@ -215,6 +213,7 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) if (kprobe_status & KPROBE_HIT_SS) { resume_execution(current_kprobe, regs); + regs->msr &= ~MSR_SE; regs->msr |= kprobe_saved_msr; unlock_kprobes(); From 05062d96a23ec0959ee5ea969f40813170c73c0e Mon Sep 17 00:00:00 2001 From: Peter Chubb Date: Wed, 8 Jun 2005 15:50:20 -0700 Subject: [PATCH 087/160] [PATCH] ia64: fix floating-point preemption problem There've been reports of problems with CONFIG_PREEMPT=y and the high floating point partition. This is caused by the possibility of preemption and rescheduling on a different processor while saving or restioirng the high partition. The only places where the FPU state is touched are in ptrace, in switch_to(), and where handling a floating-point exception. In switch_to() preemption is off. So it's only in trap.c and ptrace.c that we need to prevent preemption. Here is a patch that adds commentary to make the conditions clear, and adds appropriate preempt_{en,dis}able() calls to make it so. In trap.c I use preempt_enable_no_resched(), as we're about to return to user space where the preemption flag will be checked anyway. Signed-off-by: Peter Chubb Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/kernel/ptrace.c | 6 ++++++ arch/ia64/kernel/traps.c | 11 ++++++++++- include/asm-ia64/processor.h | 10 ++++++++-- 3 files changed, 24 insertions(+), 3 deletions(-) diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 08c8a5eb25ab..575a8f657b31 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -635,11 +635,17 @@ ia64_flush_fph (struct task_struct *task) { struct ia64_psr *psr = ia64_psr(ia64_task_regs(task)); + /* + * Prevent migrating this task while + * we're fiddling with the FPU state + */ + preempt_disable(); if (ia64_is_local_fpu_owner(task) && psr->mfh) { psr->mfh = 0; task->thread.flags |= IA64_THREAD_FPH_VALID; ia64_save_fpu(&task->thread.fph[0]); } + preempt_enable(); } /* diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c index 9bad6652d531..1861173bd4f6 100644 --- a/arch/ia64/kernel/traps.c +++ b/arch/ia64/kernel/traps.c @@ -220,13 +220,21 @@ disabled_fph_fault (struct pt_regs *regs) /* first, grant user-level access to fph partition: */ psr->dfh = 0; + + /* + * Make sure that no other task gets in on this processor + * while we're claiming the FPU + */ + preempt_disable(); #ifndef CONFIG_SMP { struct task_struct *fpu_owner = (struct task_struct *)ia64_get_kr(IA64_KR_FPU_OWNER); - if (ia64_is_local_fpu_owner(current)) + if (ia64_is_local_fpu_owner(current)) { + preempt_enable_no_resched(); return; + } if (fpu_owner) ia64_flush_fph(fpu_owner); @@ -244,6 +252,7 @@ disabled_fph_fault (struct pt_regs *regs) */ psr->mfh = 1; } + preempt_enable_no_resched(); } static inline int diff --git a/include/asm-ia64/processor.h b/include/asm-ia64/processor.h index 9e1ba8b7fb68..91bbd1f22461 100644 --- a/include/asm-ia64/processor.h +++ b/include/asm-ia64/processor.h @@ -403,7 +403,10 @@ extern void ia64_setreg_unknown_kr (void); * task_struct at this point. */ -/* Return TRUE if task T owns the fph partition of the CPU we're running on. */ +/* + * Return TRUE if task T owns the fph partition of the CPU we're running on. + * Must be called from code that has preemption disabled. + */ #define ia64_is_local_fpu_owner(t) \ ({ \ struct task_struct *__ia64_islfo_task = (t); \ @@ -411,7 +414,10 @@ extern void ia64_setreg_unknown_kr (void); && __ia64_islfo_task == (struct task_struct *) ia64_get_kr(IA64_KR_FPU_OWNER)); \ }) -/* Mark task T as owning the fph partition of the CPU we're running on. */ +/* + * Mark task T as owning the fph partition of the CPU we're running on. + * Must be called from code that has preemption disabled. + */ #define ia64_set_local_fpu_owner(t) do { \ struct task_struct *__ia64_slfo_task = (t); \ __ia64_slfo_task->thread.last_fph_cpu = smp_processor_id(); \ From 4f58802fae8a51d9e79454746584175c14f84519 Mon Sep 17 00:00:00 2001 From: Lars Marowsky-Bree Date: Wed, 8 Jun 2005 15:50:31 -0700 Subject: [PATCH 088/160] [PATCH] dm: Handle READA requests in dm-mpath.c READA errors failing with EWOULDBLOCK/EAGAIN do not constitute a valid reason for failing the path; this lead to erratic errors on DM multipath devices. This error can be safely propagated upwards without failing the path. Acked-by: Kevin Corry Acked-by: Jens Axboe Signed-off-by: Lars Marowsky-Bree Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/dm-mpath.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 1e97b3c12bd5..0c1b8520ef86 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -985,6 +985,9 @@ static int do_end_io(struct multipath *m, struct bio *bio, if (!error) return 0; /* I/O complete */ + if ((error == -EWOULDBLOCK) && bio_rw_ahead(bio)) + return error; + spin_lock(&m->lock); if (!m->nr_valid_paths) { if (!m->queue_if_no_path || m->suspended) { From ce10d979053379553757c3b178a138facaddff82 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 8 Jun 2005 21:59:15 +1000 Subject: [PATCH 089/160] [PATCH] ppc64: Fix PER_LINUX32 behaviour This patch fixes some bugs in the ppc64 PER_LINUX32 implementation, noted by Juergen Kreileder: * uname(2) doesn't respect PER_LINUX32, it returns 'ppc64' instead of 'ppc' * Child processes of a PER_LINUX32 process don't inherit PER_LINUX32 Along the way I took the opportunity to move things around so that sys_ppc32.c only has 32-bit syscall emulation functions and to remove the obsolete "fakeppc" command line option. Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/misc.S | 2 +- arch/ppc64/kernel/sys_ppc32.c | 70 +++++++++++++++++------------------ arch/ppc64/kernel/syscalls.c | 35 +++++++++++------- include/asm-ppc64/elf.h | 4 +- 4 files changed, 57 insertions(+), 54 deletions(-) diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S index b944717c1dbd..e3c73b3425dc 100644 --- a/arch/ppc64/kernel/misc.S +++ b/arch/ppc64/kernel/misc.S @@ -792,7 +792,7 @@ _GLOBAL(sys_call_table32) .llong .compat_sys_newstat .llong .compat_sys_newlstat .llong .compat_sys_newfstat - .llong .sys_uname + .llong .sys32_uname .llong .sys_ni_syscall /* 110 old iopl syscall */ .llong .sys_vhangup .llong .sys_ni_syscall /* old idle syscall */ diff --git a/arch/ppc64/kernel/sys_ppc32.c b/arch/ppc64/kernel/sys_ppc32.c index 7cf7a9600025..9c8e317c598d 100644 --- a/arch/ppc64/kernel/sys_ppc32.c +++ b/arch/ppc64/kernel/sys_ppc32.c @@ -791,31 +791,6 @@ asmlinkage int sys32_pciconfig_iobase(u32 which, u32 in_bus, u32 in_devfn) } -asmlinkage int ppc64_newuname(struct new_utsname __user * name) -{ - int errno = sys_newuname(name); - - if (current->personality == PER_LINUX32 && !errno) { - if(copy_to_user(name->machine, "ppc\0\0", 8)) { - errno = -EFAULT; - } - } - return errno; -} - -asmlinkage int ppc64_personality(unsigned long personality) -{ - int ret; - if (current->personality == PER_LINUX32 && personality == PER_LINUX) - personality = PER_LINUX32; - ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; - return ret; -} - - - /* Note: it is necessary to treat mode as an unsigned int, * with the corresponding cast to a signed int to insure that the * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode) @@ -1158,26 +1133,47 @@ asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args) } #endif +asmlinkage int sys32_uname(struct old_utsname __user * name) +{ + int err = 0; + + down_read(&uts_sem); + if (copy_to_user(name, &system_utsname, sizeof(*name))) + err = -EFAULT; + up_read(&uts_sem); + if (!err && personality(current->personality) == PER_LINUX32) { + /* change "ppc64" to "ppc" */ + if (__put_user(0, name->machine + 3) + || __put_user(0, name->machine + 4)) + err = -EFAULT; + } + return err; +} + asmlinkage int sys32_olduname(struct oldold_utsname __user * name) { int error; - - if (!name) - return -EFAULT; + if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname))) return -EFAULT; down_read(&uts_sem); error = __copy_to_user(&name->sysname,&system_utsname.sysname,__OLD_UTS_LEN); - error -= __put_user(0,name->sysname+__OLD_UTS_LEN); - error -= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN); - error -= __put_user(0,name->nodename+__OLD_UTS_LEN); - error -= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN); - error -= __put_user(0,name->release+__OLD_UTS_LEN); - error -= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN); - error -= __put_user(0,name->version+__OLD_UTS_LEN); - error -= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN); - error = __put_user(0,name->machine+__OLD_UTS_LEN); + error |= __put_user(0,name->sysname+__OLD_UTS_LEN); + error |= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN); + error |= __put_user(0,name->nodename+__OLD_UTS_LEN); + error |= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN); + error |= __put_user(0,name->release+__OLD_UTS_LEN); + error |= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN); + error |= __put_user(0,name->version+__OLD_UTS_LEN); + error |= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN); + error |= __put_user(0,name->machine+__OLD_UTS_LEN); + if (personality(current->personality) == PER_LINUX32) { + /* change "ppc64" to "ppc" */ + error |= __put_user(0, name->machine + 3); + error |= __put_user(0, name->machine + 4); + } + up_read(&uts_sem); error = error ? -EFAULT : 0; diff --git a/arch/ppc64/kernel/syscalls.c b/arch/ppc64/kernel/syscalls.c index f2865ff8d2f9..a8cbb202b8cd 100644 --- a/arch/ppc64/kernel/syscalls.c +++ b/arch/ppc64/kernel/syscalls.c @@ -199,24 +199,33 @@ out: return ret; } -static int __init set_fakeppc(char *str) +long ppc64_personality(unsigned long personality) { - if (*str) - return 0; - init_task.personality = PER_LINUX32; - return 1; -} -__setup("fakeppc", set_fakeppc); + long ret; -asmlinkage int sys_uname(struct old_utsname __user * name) + if (personality(current->personality) == PER_LINUX32 + && personality == PER_LINUX) + personality = PER_LINUX32; + ret = sys_personality(personality); + if (ret == PER_LINUX32) + ret = PER_LINUX; + return ret; +} + +long ppc64_newuname(struct new_utsname __user * name) { - int err = -EFAULT; - + int err = 0; + down_read(&uts_sem); - if (name && !copy_to_user(name, &system_utsname, sizeof (*name))) - err = 0; + if (copy_to_user(name, &system_utsname, sizeof(*name))) + err = -EFAULT; up_read(&uts_sem); - + if (!err && personality(current->personality) == PER_LINUX32) { + /* change ppc64 to ppc */ + if (__put_user(0, name->machine + 3) + || __put_user(0, name->machine + 4)) + err = -EFAULT; + } return err; } diff --git a/include/asm-ppc64/elf.h b/include/asm-ppc64/elf.h index 6c42d61bedd1..085eedb956fe 100644 --- a/include/asm-ppc64/elf.h +++ b/include/asm-ppc64/elf.h @@ -221,9 +221,7 @@ do { \ set_thread_flag(TIF_ABI_PENDING); \ else \ clear_thread_flag(TIF_ABI_PENDING); \ - if (ibcs2) \ - set_personality(PER_SVR4); \ - else if (current->personality != PER_LINUX32) \ + if (personality(current->personality) != PER_LINUX32) \ set_personality(PER_LINUX); \ } while (0) From e1dd23a0012c3929737798fda9fede0e783f4ff3 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 8 Jun 2005 13:02:25 +0200 Subject: [PATCH 090/160] [PATCH] sata_sil: Fix FIFO PCI Bus Arbitration kernel oops Correct this. diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c --- drivers/scsi/sata_sil.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 238580d244e6..49ed557a4b66 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -432,7 +432,13 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) writeb(cls, mmio_base + SIL_FIFO_R0); writeb(cls, mmio_base + SIL_FIFO_W0); writeb(cls, mmio_base + SIL_FIFO_R1); - writeb(cls, mmio_base + SIL_FIFO_W2); + writeb(cls, mmio_base + SIL_FIFO_W1); + if (ent->driver_data == sil_3114) { + writeb(cls, mmio_base + SIL_FIFO_R2); + writeb(cls, mmio_base + SIL_FIFO_W2); + writeb(cls, mmio_base + SIL_FIFO_R3); + writeb(cls, mmio_base + SIL_FIFO_W3); + } } else printk(KERN_WARNING DRV_NAME "(%s): cache line size not set. Driver may not function\n", pci_name(pdev)); From 6952df035509717bdc46194b2a3d6ffb9349f267 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Mon, 6 Jun 2005 15:56:03 +0800 Subject: [PATCH 091/160] [PATCH] sg traverse fix for __atapi_pio_bytes() Problem: Incorrect md5sum when using ATAPI PIO mode to verify a distro CD. Root cause: sg traverse problem. In __atapi_pio_bytes(), if qc->cursg++ is increased and "goto next_page" is executed, then sg is not updated to the new qc->cursg and the old sg is overwritten with the new data. Changes: - Replace "goto next_page" with "goto next_sg" to make sg updated. Signed-off-by: Albert Lee --- drivers/scsi/libata-core.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 21d194c6ace3..9e58f134f68b 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2577,7 +2577,6 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) next_sg: sg = &qc->sg[qc->cursg]; -next_page: page = sg->page; offset = sg->offset + qc->cursg_ofs; @@ -2585,6 +2584,7 @@ next_page: page = nth_page(page, (offset >> PAGE_SHIFT)); offset %= PAGE_SIZE; + /* don't overrun current sg */ count = min(sg->length - qc->cursg_ofs, bytes); /* don't cross page boundaries */ @@ -2609,8 +2609,6 @@ next_page: kunmap(page); if (bytes) { - if (qc->cursg_ofs < sg->length) - goto next_page; goto next_sg; } } From 03e49d40ea3436cae0fe43708f11584130ee4a0c Mon Sep 17 00:00:00 2001 From: Scott Murray Date: Mon, 6 Jun 2005 15:48:04 -0400 Subject: [PATCH 092/160] [PATCH] PCI Hotplug: fix CPCI reference counting bug Here's a patch that fixes up the pci_dev refcounting in the CPCI code. I've done some testing against it and it seems fine here. Signed-off-by: Scott Murray Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/cpci_hotplug_core.c | 2 ++ drivers/pci/hotplug/cpci_hotplug_pci.c | 5 ++++- 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c index 8132d946c384..30af105271a2 100644 --- a/drivers/pci/hotplug/cpci_hotplug_core.c +++ b/drivers/pci/hotplug/cpci_hotplug_core.c @@ -217,6 +217,8 @@ static void release_slot(struct hotplug_slot *hotplug_slot) kfree(slot->hotplug_slot->info); kfree(slot->hotplug_slot->name); kfree(slot->hotplug_slot); + if (slot->dev) + pci_dev_put(slot->dev); kfree(slot); } diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c index c878028ad215..225b5e551dd6 100644 --- a/drivers/pci/hotplug/cpci_hotplug_pci.c +++ b/drivers/pci/hotplug/cpci_hotplug_pci.c @@ -315,9 +315,12 @@ int cpci_unconfigure_slot(struct slot* slot) PCI_DEVFN(PCI_SLOT(slot->devfn), i)); if (dev) { pci_remove_bus_device(dev); - slot->dev = NULL; + pci_dev_put(dev); } } + pci_dev_put(slot->dev); + slot->dev = NULL; + dbg("%s - exit", __FUNCTION__); return 0; } From 9f793d2c77ec5818679e4747c554d9333cecf476 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Mon, 6 Jun 2005 13:54:59 -0700 Subject: [PATCH 093/160] [PATCH] USB: fix ub issues This smoothes two imperfections: - Increase number of LUNs per device from 4 to 9. The best solution would be to remove this limit altogether, but that has to wait until the time when more than 26 hosts are allowed. - Replace mdelay with msleep in a probing routine. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/block/ub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/ub.c b/drivers/block/ub.c index adc4dcc306f4..19c5e59bcfa8 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -51,7 +51,7 @@ * This many LUNs per USB device. * Every one of them takes a host, see UB_MAX_HOSTS. */ -#define UB_MAX_LUNS 4 +#define UB_MAX_LUNS 9 /* */ @@ -2100,7 +2100,7 @@ static int ub_probe(struct usb_interface *intf, nluns = rc; break; } - mdelay(100); + msleep(100); } for (i = 0; i < nluns; i++) { From 76854ceac3ef3408ab9a50a2521147fb14779f58 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Thu, 2 Jun 2005 10:34:11 +0100 Subject: [PATCH 094/160] [PATCH] USB: ftdi_sio: avoid losing received data in tty-ldisc ftdi_sio: Avoid losing bytes at tty-ldisc. This patch was originally developed by Daniel Smertnig. I (Ian Abbott) made a few changes. It has been tested by both Daniel and I, at least for raw, non-canonical receive data processing. Here is Daniel's original description of the patch: === During a project in which I was using a FTDI 232BM to transmit data at relative high speeds (625kBit/s), I noticed a problem where data was lost even if flow control was enabled: The FTDI-Driver receives 512 Bytes of data over USB at a time, which consists of 8 64-Byte packets. Subtracting the 2 bytes of status information included in each packet this gives 496 "real" data bytes per read. This data is passed (indirectly, via the flip buffers) to the tty line discipline which takes care of throttling when there the free buffer space reaches TTY_THRESHOLD_THROTTLE (128). Because the FTDI driver processes up to 496 bytes at a time, throttling won't happen in time and the line discipline will discard the remaining bytes. To avoid this the patch passes data in 62-byte blocks to the tty layer and checks the available space in the ldisc-buffers. If there isn't enough free space, processing the rest of the data is delayed using a workqueue. Note: The original problem should be easily reproducible with a userspace program which does slow & small reads. === Signed-off-by: Ian Abbott Signed-off-by: Daniel Smertnig Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 118 ++++++++++++++++++++++++++-------- 1 file changed, 91 insertions(+), 27 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 051c3a77b41b..3bfcc7b9f861 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -264,7 +264,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.4.1" +#define DRIVER_VERSION "v1.4.2" #define DRIVER_AUTHOR "Greg Kroah-Hartman , Bill Ryder , Kuba Ober " #define DRIVER_DESC "USB FTDI Serial Converters Driver" @@ -687,6 +687,8 @@ struct ftdi_private { char prev_status, diff_status; /* Used for TIOCMIWAIT */ __u8 rx_flags; /* receive state flags (throttling) */ spinlock_t rx_lock; /* spinlock for receive state */ + struct work_struct rx_work; + int rx_processed; __u16 interface; /* FT2232C port interface (0 for FT232/245) */ @@ -717,7 +719,7 @@ static int ftdi_write_room (struct usb_serial_port *port); static int ftdi_chars_in_buffer (struct usb_serial_port *port); static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs); static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs); -static void ftdi_process_read (struct usb_serial_port *port); +static void ftdi_process_read (void *param); static void ftdi_set_termios (struct usb_serial_port *port, struct termios * old); static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file); static int ftdi_tiocmset (struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear); @@ -1387,6 +1389,8 @@ static int ftdi_common_startup (struct usb_serial *serial) port->read_urb->transfer_buffer_length = BUFSZ; } + INIT_WORK(&priv->rx_work, ftdi_process_read, port); + /* Free port's existing write urb and transfer buffer. */ if (port->write_urb) { usb_free_urb (port->write_urb); @@ -1617,6 +1621,7 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) spin_unlock_irqrestore(&priv->rx_lock, flags); /* Start reading from the device */ + priv->rx_processed = 0; usb_fill_bulk_urb(port->read_urb, dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, @@ -1667,6 +1672,10 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp) err("Error from RTS LOW urb"); } } /* Note change no line if hupcl is off */ + + /* cancel any scheduled reading */ + cancel_delayed_work(&priv->rx_work); + flush_scheduled_work(); /* shutdown our bulk read */ if (port->read_urb) @@ -1862,23 +1871,14 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs) return; } - /* If throttled, delay receive processing until unthrottled. */ - spin_lock(&priv->rx_lock); - if (priv->rx_flags & THROTTLED) { - dbg("Deferring read urb processing until unthrottled"); - priv->rx_flags |= ACTUALLY_THROTTLED; - spin_unlock(&priv->rx_lock); - return; - } - spin_unlock(&priv->rx_lock); - ftdi_process_read(port); } /* ftdi_read_bulk_callback */ -static void ftdi_process_read (struct usb_serial_port *port) +static void ftdi_process_read (void *param) { /* ftdi_process_read */ + struct usb_serial_port *port = (struct usb_serial_port*)param; struct urb *urb; struct tty_struct *tty; struct ftdi_private *priv; @@ -1889,6 +1889,7 @@ static void ftdi_process_read (struct usb_serial_port *port) int result; int need_flip; int packet_offset; + unsigned long flags; dbg("%s - port %d", __FUNCTION__, port->number); @@ -1915,12 +1916,18 @@ static void ftdi_process_read (struct usb_serial_port *port) data = urb->transfer_buffer; - /* The first two bytes of every read packet are status */ - if (urb->actual_length > 2) { - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + if (priv->rx_processed) { + dbg("%s - already processed: %d bytes, %d remain", __FUNCTION__, + priv->rx_processed, + urb->actual_length - priv->rx_processed); } else { - dbg("Status only: %03oo %03oo",data[0],data[1]); - } + /* The first two bytes of every read packet are status */ + if (urb->actual_length > 2) { + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + } else { + dbg("Status only: %03oo %03oo",data[0],data[1]); + } + } /* TO DO -- check for hung up line and handle appropriately: */ @@ -1929,8 +1936,12 @@ static void ftdi_process_read (struct usb_serial_port *port) /* if CD is dropped and the line is not CLOCAL then we should hangup */ need_flip = 0; - for (packet_offset=0; packet_offset < urb->actual_length; packet_offset += PKTSZ) { + for (packet_offset = priv->rx_processed; packet_offset < urb->actual_length; packet_offset += PKTSZ) { + int length; + /* Compare new line status to the old one, signal if different */ + /* N.B. packet may be processed more than once, but differences + * are only processed once. */ if (priv != NULL) { char new_status = data[packet_offset+0] & FTDI_STATUS_B0_MASK; if (new_status != priv->prev_status) { @@ -1940,6 +1951,35 @@ static void ftdi_process_read (struct usb_serial_port *port) } } + length = min(PKTSZ, urb->actual_length-packet_offset)-2; + if (length < 0) { + err("%s - bad packet length: %d", __FUNCTION__, length+2); + length = 0; + } + + /* have to make sure we don't overflow the buffer + with tty_insert_flip_char's */ + if (tty->flip.count+length > TTY_FLIPBUF_SIZE) { + tty_flip_buffer_push(tty); + need_flip = 0; + + if (tty->flip.count != 0) { + /* flip didn't work, this happens when ftdi_process_read() is + * called from ftdi_unthrottle, because TTY_DONT_FLIP is set */ + dbg("%s - flip buffer push failed", __FUNCTION__); + break; + } + } + if (priv->rx_flags & THROTTLED) { + dbg("%s - throttled", __FUNCTION__); + break; + } + if (tty->ldisc.receive_room(tty)-tty->flip.count < length) { + /* break out & wait for throttling/unthrottling to happen */ + dbg("%s - receive room low", __FUNCTION__); + break; + } + /* Handle errors and break */ error_flag = TTY_NORMAL; /* Although the device uses a bitmask and hence can have multiple */ @@ -1962,13 +2002,8 @@ static void ftdi_process_read (struct usb_serial_port *port) error_flag = TTY_FRAME; dbg("FRAMING error"); } - if (urb->actual_length > packet_offset + 2) { - for (i = 2; (i < PKTSZ) && ((i+packet_offset) < urb->actual_length); ++i) { - /* have to make sure we don't overflow the buffer - with tty_insert_flip_char's */ - if(tty->flip.count >= TTY_FLIPBUF_SIZE) { - tty_flip_buffer_push(tty); - } + if (length > 0) { + for (i = 2; i < length+2; i++) { /* Note that the error flag is duplicated for every character received since we don't know which character it applied to */ @@ -2005,6 +2040,35 @@ static void ftdi_process_read (struct usb_serial_port *port) tty_flip_buffer_push(tty); } + if (packet_offset < urb->actual_length) { + /* not completely processed - record progress */ + priv->rx_processed = packet_offset; + dbg("%s - incomplete, %d bytes processed, %d remain", + __FUNCTION__, packet_offset, + urb->actual_length - packet_offset); + /* check if we were throttled while processing */ + spin_lock_irqsave(&priv->rx_lock, flags); + if (priv->rx_flags & THROTTLED) { + priv->rx_flags |= ACTUALLY_THROTTLED; + spin_unlock_irqrestore(&priv->rx_lock, flags); + dbg("%s - deferring remainder until unthrottled", + __FUNCTION__); + return; + } + spin_unlock_irqrestore(&priv->rx_lock, flags); + /* if the port is closed stop trying to read */ + if (port->open_count > 0){ + /* delay processing of remainder */ + schedule_delayed_work(&priv->rx_work, 1); + } else { + dbg("%s - port is closed", __FUNCTION__); + } + return; + } + + /* urb is completely processed */ + priv->rx_processed = 0; + /* if the port is closed stop trying to read */ if (port->open_count > 0){ /* Continue trying to always read */ @@ -2444,7 +2508,7 @@ static void ftdi_unthrottle (struct usb_serial_port *port) spin_unlock_irqrestore(&priv->rx_lock, flags); if (actually_throttled) - ftdi_process_read(port); + schedule_work(&priv->rx_work); } static int __init ftdi_init (void) From 4e71e47da3367e8df5994a17fb421ddeaa5025e3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 9 Jun 2005 16:53:28 +0100 Subject: [PATCH 095/160] [PATCH] ARM: Remove zero-byte sized file Remove the remaining zero byte file left over from the Xscale fixes. Signed-off-by: Russell King --- arch/arm/mm/minicache.c | 0 1 file changed, 0 insertions(+), 0 deletions(-) delete mode 100644 arch/arm/mm/minicache.c diff --git a/arch/arm/mm/minicache.c b/arch/arm/mm/minicache.c deleted file mode 100644 index e69de29bb2d1..000000000000 From 12035d64565ae7ecbc7fe906e7fcc8a4a71a3789 Mon Sep 17 00:00:00 2001 From: Dave Neuer Date: Thu, 9 Jun 2005 17:40:55 +0100 Subject: [PATCH 096/160] [PATCH] ARM: 2706/1: Fix compile on SA-based iPAQs and remove stale CREDITS info Patch from Dave Neuer This fixes the "multiple definitions of cpufreq_get" errors on StrongARM-based iPAQs. Signed-off-by: Dave Neuer Signed-off-by: Russell King --- CREDITS | 6 +----- arch/arm/Kconfig | 2 +- arch/arm/configs/h3600_defconfig | 24 +++++++++++++++--------- arch/arm/mach-sa1100/Kconfig | 2 +- 4 files changed, 18 insertions(+), 16 deletions(-) diff --git a/CREDITS b/CREDITS index 9bd099d960f3..d65ffe5a4d08 100644 --- a/CREDITS +++ b/CREDITS @@ -2475,13 +2475,9 @@ S: Potsdam, New York 13676 S: USA N: Dave Neuer -E: dneuer@innovation-charter.com -E: mr_fred_smoothie@yahoo.com +E: dave.neuer@pobox.com D: Helped implement support for Compaq's H31xx series iPAQs D: Other mostly minor tweaks & bugfixes -S: 325 E. Main St., Suite 3 -S: Carnegie, PA 15105 -S: USA N: Michael Neuffer E: mike@i-Connect.Net diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index bf397a9f8ac2..e787029d1978 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -497,7 +497,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_SA1100 bool - depends on CPU_FREQ && (SA1100_LART || SA1100_PLEB) + depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB) default y config CPU_FREQ_SA1110 diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig index b4e297dd54b2..b9de07de80fe 100644 --- a/arch/arm/configs/h3600_defconfig +++ b/arch/arm/configs/h3600_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Mon Mar 28 00:02:26 2005 +# Linux kernel version: 2.6.12-rc4 +# Thu Jun 9 01:59:03 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -33,6 +34,8 @@ CONFIG_KOBJECT_UEVENT=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -120,6 +123,7 @@ CONFIG_CPU_MINICACHE=y # Bus support # CONFIG_ISA=y +CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -138,6 +142,7 @@ CONFIG_PCMCIA_SA1100=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set CONFIG_DISCONTIGMEM=y # CONFIG_LEDS is not set @@ -159,12 +164,13 @@ CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_SA1100=y # # Floating point emulation @@ -298,7 +304,6 @@ CONFIG_MTD_SA1100=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m @@ -379,7 +384,6 @@ CONFIG_NET=y # Networking options # # CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -476,6 +480,7 @@ CONFIG_IRCOMM=m # CONFIG_SMC_IRCC_FIR is not set # CONFIG_ALI_FIR is not set CONFIG_SA1100_FIR=m +# CONFIG_VIA_FIR is not set # CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set @@ -647,7 +652,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # -# CONFIG_TCG_TPM is not set # # I2C support @@ -676,9 +680,11 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set CONFIG_FB_SA1100=y +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 50cde576dadf..6923316b3d0d 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -150,7 +150,7 @@ config SA1100_SSP config H3600_SLEEVE tristate "Compaq iPAQ Handheld sleeve support" - depends on SA1100_H3600 + depends on SA1100_H3100 || SA1100_H3600 help Choose this option to enable support for extension packs (sleeves) for the Compaq iPAQ H3XXX series of handheld computers. This option From a2a64769d0d3cc0380b4b6ecdcb781a2f790a69e Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Thu, 9 Jun 2005 12:29:00 -0700 Subject: [PATCH 097/160] [IA64] Fix race condition in the rt_sigprocmask fastcall current->blocked will be set to the value of current->thread_info->flags if the cmpxchg to update thread_info->flags fails. For performance reasons the store into current->blocked was placed in the cmpxchg loop. However, the cmpxchg overwrites the register holding the value to be stored. In the rare case of a retry the value of thread_info->flags will be written into current->blocked. The fix is to use another register so that the register containing the current->blocked value is not overwritten. Signed-off-by: Christoph Lameter Signed-off-by: Tony Luck --- arch/ia64/kernel/fsys.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S index 4f3cdef75797..962b6c4e32b5 100644 --- a/arch/ia64/kernel/fsys.S +++ b/arch/ia64/kernel/fsys.S @@ -460,9 +460,9 @@ EX(.fail_efault, ld8 r14=[r33]) // r14 <- *set ;; st8 [r2]=r14 // update current->blocked with new mask - cmpxchg4.acq r14=[r9],r18,ar.ccv // current->thread_info->flags <- r18 + cmpxchg4.acq r8=[r9],r18,ar.ccv // current->thread_info->flags <- r18 ;; - cmp.ne p6,p0=r17,r14 // update failed? + cmp.ne p6,p0=r17,r8 // update failed? (p6) br.cond.spnt.few 1b // yes -> retry #ifdef CONFIG_SMP From 7aa0b0d5ab5eed29a49fce55868456bca073d77e Mon Sep 17 00:00:00 2001 From: Vincent Sanders Date: Thu, 9 Jun 2005 21:59:21 +0100 Subject: [PATCH 098/160] [PATCH] ARM: 2707/2: Fix badge4 CPU Frequency build faliure Patch from Vincent Sanders This fixes the "multiple definitions of cpufreq_get" build faliure on the Badge4 SA1100 platform. Signed-off-by: Vincent Sanders Signed-off-by: Russell King --- arch/arm/Kconfig | 2 +- arch/arm/configs/badge4_defconfig | 29 ++++++++++++++++++----------- 2 files changed, 19 insertions(+), 12 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e787029d1978..0aeb5f91d11d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -497,7 +497,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_SA1100 bool - depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB) + depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4) default y config CPU_FREQ_SA1110 diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index 2b4059d2f8e4..5d92af975d87 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sat Mar 26 21:32:26 2005 +# Linux kernel version: 2.6.12-rc6-git3 +# Thu Jun 9 19:00:50 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -34,6 +35,8 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -109,7 +112,6 @@ CONFIG_CPU_ABRT_EV4=y CONFIG_CPU_CACHE_V4WB=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WB=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -122,6 +124,7 @@ CONFIG_FORCE_MAX_ZONEORDER=9 # Bus support # CONFIG_ISA=y +CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -131,6 +134,7 @@ CONFIG_ISA=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set CONFIG_DISCONTIGMEM=y # CONFIG_LEDS is not set @@ -152,12 +156,14 @@ CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_SA1100=y # # Floating point emulation @@ -294,7 +300,6 @@ CONFIG_PARPORT_NOT_PC=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set @@ -428,7 +433,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -526,6 +530,7 @@ CONFIG_IRDA_ULTRA=y # CONFIG_SMC_IRCC_FIR is not set # CONFIG_ALI_FIR is not set CONFIG_SA1100_FIR=y +# CONFIG_VIA_FIR is not set CONFIG_BT=m CONFIG_BT_L2CAP=m # CONFIG_BT_SCO is not set @@ -618,7 +623,6 @@ CONFIG_NET_WIRELESS=y # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -687,7 +691,6 @@ CONFIG_RTC=m # # TPM devices # -# CONFIG_TCG_TPM is not set # # I2C support @@ -736,6 +739,7 @@ CONFIG_I2C_ELEKTOR=m # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -747,6 +751,7 @@ CONFIG_I2C_ELEKTOR=m # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -871,7 +876,6 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DEBUG=y -# CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set @@ -954,9 +958,11 @@ CONFIG_USB_USS720=m # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_WHITEHEAT=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m @@ -985,6 +991,7 @@ CONFIG_USB_SERIAL_KEYSPAN=m # CONFIG_USB_SERIAL_KOBIL_SCT is not set CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_TI is not set CONFIG_USB_SERIAL_CYBERJACK=m From 07c6d48fd10a8eeae899e06876aa0b885a8e2a1b Mon Sep 17 00:00:00 2001 From: Vincent Sanders Date: Thu, 9 Jun 2005 21:59:22 +0100 Subject: [PATCH 099/160] [PATCH] ARM: 2708/1: Fix hackkit CPU Frequency build faliure Patch from Vincent Sanders This fixes the "multiple definitions of cpufreq_get" build faliure on the hackkit SA1100 platform. Signed-off-by: Vincent Sanders Signed-off-by: Russell King --- arch/arm/Kconfig | 2 +- arch/arm/configs/hackkit_defconfig | 22 ++++++++++++---------- 2 files changed, 13 insertions(+), 11 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0aeb5f91d11d..5eee3bcb22b5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -497,7 +497,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_SA1100 bool - depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4) + depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT) default y config CPU_FREQ_SA1110 diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig index 6987c8c5ddb4..fb41a36a5a68 100644 --- a/arch/arm/configs/hackkit_defconfig +++ b/arch/arm/configs/hackkit_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Mon Mar 28 00:22:34 2005 +# Linux kernel version: 2.6.12-rc6-git3 +# Thu Jun 9 20:58:58 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -34,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -109,7 +112,6 @@ CONFIG_CPU_ABRT_EV4=y CONFIG_CPU_CACHE_V4WB=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WB=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -119,6 +121,7 @@ CONFIG_CPU_MINICACHE=y # Bus support # CONFIG_ISA=y +CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -128,6 +131,7 @@ CONFIG_ISA=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set CONFIG_DISCONTIGMEM=y CONFIG_LEDS=y @@ -151,12 +155,14 @@ CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_SA1100=y # # Floating point emulation @@ -280,7 +286,6 @@ CONFIG_MTD_CFI_UTIL=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set @@ -338,7 +343,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -484,7 +488,6 @@ CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -533,7 +536,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # -# CONFIG_TCG_TPM is not set # # I2C support From 3079ca621e9e09f4593c20a9a2f24237c355f683 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 9 Jun 2005 14:44:07 -0700 Subject: [PATCH 100/160] [CIFS] Fix cifs update of page cache. Write at correct offset when out of memory and add_to_page_cache fails. Thanks to Shaggy for pointing out the fix. Signed-off-by: Steve French (sfrench@us.ibm.com) Signed-off-by: Shaggy (shaggy@us.ibm.com) --- fs/cifs/CHANGES | 3 ++- fs/cifs/file.c | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 95483baab706..dab4774ee7bb 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -6,7 +6,8 @@ kills the cifsd thread (NB: killing the cifs kernel threads is not recommended, unmount and rmmod cifs will kill them when they are no longer needed). Fix readdir to ASCII servers (ie older servers which do not support Unicode) and also require asterik. - +Fix out of memory case in which data could be written one page +off in the page cache. Version 1.33 ------------ diff --git a/fs/cifs/file.c b/fs/cifs/file.c index dde2d251fc3d..30ab70ce5547 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1352,6 +1352,8 @@ static void cifs_copy_cache_pages(struct address_space *mapping, GFP_KERNEL)) { page_cache_release(page); cFYI(1, ("Add page cache failed")); + data += PAGE_CACHE_SIZE; + bytes_read -= PAGE_CACHE_SIZE; continue; } From 1e06276704c101bd1ae7b62879faaffcd7496a3e Mon Sep 17 00:00:00 2001 From: Narendra Sankar Date: Fri, 6 May 2005 12:00:05 -0700 Subject: [PATCH 101/160] [PATCH] PCI: MSI functionality broken on Serverworks GC chipset MSI functionality is broken on the GC_LE x86 chipset that Serverworks developed and that is being used in various platforms today. Broadcom is going to push out to the kernel MSI enabled Gigabit drivers (in the very near future), and we would like to make sure that MSI does not get enabled on any platforms using the GC_LE chipset (device id 0x17). Following the AMD 8131 example, I am including a patch to disable MSI functionality when a GCNB_LE is detected. Please let me know if there are any issues with this. This is a permanent fix for this chipset, as the hardware will not be updated. Signed-off-by: Narendra Sankar Signed-off-by: Greg Kroah-Hartman --- drivers/pci/quirks.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 2194669300bf..968033fd29f0 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -456,6 +456,12 @@ static void __init quirk_amd_8131_ioapic(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_APIC, quirk_amd_8131_ioapic ); +static void __init quirk_svw_msi(struct pci_dev *dev) +{ + pci_msi_quirk = 1; + printk(KERN_WARNING "PCI: MSI quirk detected. pci_msi_quirk set.\n"); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_svw_msi ); #endif /* CONFIG_X86_IO_APIC */ From 7fbdf1a23be1837b8bc5bcec096015ca99e00aa7 Mon Sep 17 00:00:00 2001 From: Eugene Surovegin Date: Thu, 9 Jun 2005 12:36:29 -0700 Subject: [PATCH 102/160] [PATCH] ppc32: add 405EP cpu_spec entry Add a definition for PPC 405EP which was lost somehow during 2.4 -> 2.6 transition. Recent change to arch/ppc/kernel/misc.S ("Fix incorrect CPU_FTR fixup usage for unified caches") triggered this bug and 405EP boards don't boot anymore. Signed-off-by: Eugene Surovegin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/kernel/cputable.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c index 17abf6cd0d90..ce2618ac8ac2 100644 --- a/arch/ppc/kernel/cputable.c +++ b/arch/ppc/kernel/cputable.c @@ -860,6 +860,17 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, }, + { /* 405EP */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x51210000, + .cpu_name = "405EP", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .icache_bsize = 32, + .dcache_bsize = 32, + }, #endif /* CONFIG_40x */ #ifdef CONFIG_44x From 243cd55e021baf28babdd88112ac03ae5cd4bb9c Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 9 Jun 2005 12:36:33 -0700 Subject: [PATCH 103/160] [PATCH] iseries_veth: Supress spurious WARN_ON() at module unload My patch from a few weeks back (now in mainline), called "Cleanup skbs to prevent unregister_netdevice() hanging", can cause our TX timeout code to fire on machines with lots of VLANs (because it takes > 2 seconds between when we stop the queues and when we're finished stopping the connections). When that happens the TX timeout code freaks out and does a WARN_ON() because as far as it's concerned there shouldn't be a TX timeout happening, which is fair enough. I have a "proper" fix for this, which is to a) do refcounting on connections and b) implement a proper ack timer so we don't keep unacked skbs lying around for ever. But for 2.6.12 I propose just supressing the WARN_ON(). Users will still see the "NETDEV WATCHDOG" warning, but that's not nearly as bad as a WARN_ON() which users interpret as an Oops. Signed-off-by: Michael Ellerman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/iseries_veth.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index 13ed8dc1e91d..55af32e9bf08 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -802,13 +802,14 @@ static void veth_tx_timeout(struct net_device *dev) spin_lock_irqsave(&port->pending_gate, flags); + if (!port->pending_lpmask) { + spin_unlock_irqrestore(&port->pending_gate, flags); + return; + } + printk(KERN_WARNING "%s: Tx timeout! Resetting lp connections: %08x\n", dev->name, port->pending_lpmask); - /* If we've timed out the queue must be stopped, which should - * only ever happen when there is a pending packet. */ - WARN_ON(! port->pending_lpmask); - for (i = 0; i < HVMAXARCHITECTEDLPS; i++) { struct veth_lpar_connection *cnx = veth_cnx[i]; From 0086b5ec7834b78358dea3f713275a9ae2b229ec Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 10 Jun 2005 14:19:02 +1000 Subject: [PATCH 104/160] [PATCH] ppc32: Fix nasty sleep/wakeup problem Despite all the care lately in making the powermac sleep/wakeup as robust as possible, there is still a nasty related to the use of cpufreq on PMU based machines. Unfortunately, it affects paulus old powerbook so I have to fix it :) We didn't manage to understand what is precisely going on, it leads to memory corruption and might have to do with RAM not beeing properly refreshed when a cpufreq transition is done right before the sleep. The best workaround (and less intrusive at this point) we could come up with is included in this patch. We basically do _not_ force a switch to high speed on suspend anymore (that is what is causing the problem) on those machines. We still force a speed switch on wakeup (since we don't know what speed we are coming back from sleep at, and that seems to work fine). Since, during this short interval, the actual CPU speed might be incorrect, we also hack around by multiplying loops_per_jiffy by 2 (max speed factor on those machines) during early wakeup stage to make sure udelay's during that time aren't too short. For after 2.6.12, we'll change udelay implementation to use the CPU timebase (which is always constant) instead like we do on ppc64 and thus get rid of all those problems. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/ppc/platforms/pmac_cpufreq.c | 7 +++++-- drivers/macintosh/via-pmu.c | 6 ++++++ 2 files changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/ppc/platforms/pmac_cpufreq.c b/arch/ppc/platforms/pmac_cpufreq.c index 937f46df711e..5fdd4f607a40 100644 --- a/arch/ppc/platforms/pmac_cpufreq.c +++ b/arch/ppc/platforms/pmac_cpufreq.c @@ -83,7 +83,7 @@ static u32 frequency_gpio; static u32 slew_done_gpio; static int no_schedule; static int has_cpu_l2lve; - +static int is_pmu_based; /* There are only two frequency states for each processor. Values * are in kHz for the time being. @@ -463,7 +463,7 @@ static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy, u32 state) */ no_schedule = 1; sleep_freq = cur_freq; - if (cur_freq == low_freq) + if (cur_freq == low_freq && !is_pmu_based) do_set_cpu_speed(CPUFREQ_HIGH, 0); return 0; } @@ -588,6 +588,7 @@ static int __pmac pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) return 1; hi_freq = (*value) / 1000; set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; return 0; } @@ -692,6 +693,7 @@ static int __init pmac_cpufreq_setup(void) hi_freq = cur_freq; low_freq = 400000; set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; } /* Else check for TiPb 400 & 500 */ else if (machine_is_compatible("PowerBook3,2")) { @@ -703,6 +705,7 @@ static int __init pmac_cpufreq_setup(void) hi_freq = cur_freq; low_freq = 300000; set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; } /* Else check for 750FX */ else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index bb9f4044c74d..b941ee220997 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -2593,6 +2593,9 @@ powerbook_sleep_Core99(void) /* Restore VIA */ restore_via_state(); + /* tweak LPJ before cpufreq is there */ + loops_per_jiffy *= 2; + /* Restore video */ pmac_call_early_video_resume(); @@ -2613,6 +2616,9 @@ powerbook_sleep_Core99(void) pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask); pmu_wait_complete(&req); + /* Restore LPJ, cpufreq will adjust the cpu frequency */ + loops_per_jiffy /= 2; + pmac_wakeup_devices(); return 0; From e98ded32f37a538b906d98059b3db71be36405a7 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 10 Jun 2005 18:47:38 +1000 Subject: [PATCH 105/160] [PATCH] drm add i945G pci id Add pci identifier for i945G chipset Signed-off-by: Dave Airlie --- drivers/char/drm/drm_pciids.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h index 54a2914e3a32..11c6950158b3 100644 --- a/drivers/char/drm/drm_pciids.h +++ b/drivers/char/drm/drm_pciids.h @@ -220,5 +220,6 @@ {0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2592, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x8086, 0x2772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0, 0, 0} From 74e8ebc55d85ca1acb3e73610965bea63cc39054 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 10 Jun 2005 19:27:51 +1000 Subject: [PATCH 106/160] [PATCH] remove bogus hack from radeon IRQ handler This removes a bogus hack from the radeon IRQ handler. There is a better fix from myself and benh in DRM CVS but I'll wait until 2.6.13-rc so it gets more testing. Signed-off-by: Dave Airlie --- drivers/char/drm/radeon_irq.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/char/drm/radeon_irq.c b/drivers/char/drm/radeon_irq.c index 5b18bee6492e..cd25f28e26a3 100644 --- a/drivers/char/drm/radeon_irq.c +++ b/drivers/char/drm/radeon_irq.c @@ -123,11 +123,6 @@ static int radeon_wait_irq(drm_device_t *dev, int swi_nr) dev_priv->stats.boxes |= RADEON_BOX_WAIT_IDLE; - /* This is a hack to work around mysterious freezes on certain - * systems: - */ - radeon_acknowledge_irqs( dev_priv ); - DRM_WAIT_ON( ret, dev_priv->swi_queue, 3 * DRM_HZ, RADEON_READ( RADEON_LAST_SWI_REG ) >= swi_nr ); From 90abb7b5f3bd9271a455cd640a70c285b4fd0c89 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 10 Jun 2005 09:37:21 -0700 Subject: [PATCH 107/160] ppc: remove two extraneous descriptors for the 405EP CPU The patch to add them keeps on getting applied, over and over again ;) Hopefully no more. --- arch/ppc/kernel/cputable.c | 22 ---------------------- 1 file changed, 22 deletions(-) diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c index ce2618ac8ac2..d44b7dc5390a 100644 --- a/arch/ppc/kernel/cputable.c +++ b/arch/ppc/kernel/cputable.c @@ -849,28 +849,6 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, }, - { /* 405EP */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x51210000, - .cpu_name = "405EP", - .cpu_features = CPU_FTR_SPLIT_ID_CACHE | - CPU_FTR_USE_TB, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .icache_bsize = 32, - .dcache_bsize = 32, - }, - { /* 405EP */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x51210000, - .cpu_name = "405EP", - .cpu_features = CPU_FTR_SPLIT_ID_CACHE | - CPU_FTR_USE_TB, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .icache_bsize = 32, - .dcache_bsize = 32, - }, #endif /* CONFIG_40x */ #ifdef CONFIG_44x From bb011b8e8eded247cb71cb6d10e47517aacbd542 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 12 Jun 2005 23:26:05 +0100 Subject: [PATCH 108/160] [PATCH] ARM: 2709/1: Systems with PCMCIA should also see IDE options (for CompactFlash memories) Patch from David Brownell The ARM generic Kconfig filters out IDE options ... except for an error prone ARMload of special cases. This adds one general case to the systems that will offer IDE options: kernels with PCMCIA support, which probably want to use IDE to access CompactFlash cards. This might allow many (most?) of the other cases to disappear, for systems that only see IDE hardware through CF cards. Right now this one patch is used to gate access to CF cards, including MicroDrives, for both omap_cf and at91_cf drivers. Signed-off-by: David Brownell Signed-off-by: Russell King --- arch/arm/Kconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5eee3bcb22b5..475950c8a831 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -689,7 +689,9 @@ source "drivers/block/Kconfig" source "drivers/acorn/block/Kconfig" -if ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE +if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ + || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ + || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE source "drivers/ide/Kconfig" endif From 392a8b7efe069564bf7ed057103b1a3f41e55734 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 12 Jun 2005 10:57:40 +0200 Subject: [PATCH 109/160] [PATCH] IrDA: IrDA: Fix CONFIG_VIA_FIR typo (double `those') Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- drivers/net/irda/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index 1c553d7efdd9..ca5914091d3a 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -389,7 +389,7 @@ config VIA_FIR help Say Y here if you want to build support for the VIA VT8231 and VIA VT1211 IrDA controllers, found on the motherboards using - those those VIA chipsets. To use this controller, you will need + those VIA chipsets. To use this controller, you will need to plug a specific 5 pins FIR IrDA dongle in the specific motherboard connector. The driver provides support for SIR, MIR and FIR (4Mbps) speeds. From a58e76f25432dc5e3e84d04c27bec03347ca365b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 12 Jun 2005 10:56:26 +0200 Subject: [PATCH 110/160] [PATCH] Remove obsolete HAVE_ARCH_GET_SIGNAL_TO_DELIVER? Now m68k no longer sets HAVE_ARCH_GET_SIGNAL_TO_DELIVER, can it be removed completely? Or may ARM26 still need it? Note that its usage was removed from kernel/signal.c about 2 months ago. Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- include/asm-arm26/signal.h | 3 --- include/linux/signal.h | 2 -- 2 files changed, 5 deletions(-) diff --git a/include/asm-arm26/signal.h b/include/asm-arm26/signal.h index dedb29280303..37ad25355591 100644 --- a/include/asm-arm26/signal.h +++ b/include/asm-arm26/signal.h @@ -166,9 +166,6 @@ typedef struct sigaltstack { #include #define sigmask(sig) (1UL << ((sig) - 1)) -//FIXME!!! -//#define HAVE_ARCH_GET_SIGNAL_TO_DELIVER - #endif diff --git a/include/linux/signal.h b/include/linux/signal.h index 0a98f5ec5cae..7be18b5e2fb4 100644 --- a/include/linux/signal.h +++ b/include/linux/signal.h @@ -231,10 +231,8 @@ extern int __group_send_sig_info(int, struct siginfo *, struct task_struct *); extern long do_sigpending(void __user *, unsigned long); extern int sigprocmask(int, sigset_t *, sigset_t *); -#ifndef HAVE_ARCH_GET_SIGNAL_TO_DELIVER struct pt_regs; extern int get_signal_to_deliver(siginfo_t *info, struct k_sigaction *return_ka, struct pt_regs *regs, void *cookie); -#endif #endif /* __KERNEL__ */ From 707f919c643937e43a04e31d0502ecbf5a10445a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 12 Jun 2005 11:25:43 +0200 Subject: [PATCH 111/160] [PATCH] M68k: Update defconfigs Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- arch/m68k/configs/amiga_defconfig | 15 ++++----------- arch/m68k/configs/apollo_defconfig | 7 ++++--- arch/m68k/configs/atari_defconfig | 7 ++++--- arch/m68k/configs/bvme6000_defconfig | 7 ++++--- arch/m68k/configs/hp300_defconfig | 7 ++++--- arch/m68k/configs/mac_defconfig | 7 ++++--- arch/m68k/configs/mvme147_defconfig | 7 ++++--- arch/m68k/configs/mvme16x_defconfig | 7 ++++--- arch/m68k/configs/q40_defconfig | 15 ++++----------- arch/m68k/configs/sun3_defconfig | 7 ++++--- arch/m68k/configs/sun3x_defconfig | 7 ++++--- arch/m68k/defconfig | 7 ++++--- 12 files changed, 48 insertions(+), 52 deletions(-) diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index 7dbf997ff205..5649fbae430e 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:05:59 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:23 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -135,7 +137,6 @@ CONFIG_PARPORT_1284=y # CONFIG_AMIGA_FLOPPY=y CONFIG_AMIGA_Z2RAM=y -# CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y @@ -223,17 +224,12 @@ CONFIG_SCSI_CONSTANTS=y # # SCSI low-level drivers # -# CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_PPA is not set @@ -244,7 +240,6 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_DEBUG is not set CONFIG_A3000_SCSI=y CONFIG_A2091_SCSI=y @@ -492,7 +487,6 @@ CONFIG_HYDRA=m CONFIG_ZORRO8390=m CONFIG_APNE=m # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set @@ -620,7 +614,6 @@ CONFIG_SERIO_SERPORT=m # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 505a2968e604..63024b0b7ac3 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:00 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:27 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -497,7 +499,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 617aa73c3250..6433da2d2ce2 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:18 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:32 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -531,7 +533,6 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index b501db51d9ec..da2a23a21463 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:19 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:37 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -496,7 +498,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 2bf6cef4f2b2..51251883adf8 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:21 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:41 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -498,7 +500,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index 7074f856820c..15b80abfe94a 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:24 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:45 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -540,7 +542,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index 61f09bc4846a..f0d5534f6830 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:28 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:50 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -498,7 +500,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 69c01004ec41..1d5c46ff3c81 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:31 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:53 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -497,7 +499,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 550ec26006c1..856238634d42 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:34 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:58 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -125,7 +127,6 @@ CONFIG_FW_LOADER=m # Block devices # # CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m @@ -210,17 +211,12 @@ CONFIG_SCSI_CONSTANTS=y # # SCSI low-level drivers # -# CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_NCR53C406A is not set @@ -229,7 +225,6 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_DEBUG is not set # @@ -466,7 +461,6 @@ CONFIG_EQUALIZER=m CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set @@ -570,7 +564,6 @@ CONFIG_SERIO_Q40KBD=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index 5b5a619645aa..b96b4584735a 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:37 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:35:02 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -487,7 +489,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 704e42344cba..997143b7928a 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:40 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:35:06 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -497,7 +499,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/defconfig b/arch/m68k/defconfig index 5b2296ecba82..7d935e48a9a8 100644 --- a/arch/m68k/defconfig +++ b/arch/m68k/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:05:31 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:17 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -33,6 +33,8 @@ CONFIG_KOBJECT_UEVENT=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -355,7 +357,6 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices From c3315ede1bdf7bc706b59870df41b9cdb6e3995a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 12 Jun 2005 11:25:42 +0200 Subject: [PATCH 112/160] [PATCH] M68k: Mark Sun-3 NCR5380 SCSI broken M68k: Mark Sun-3 NCR5380 SCSI broken until NCR5380_abort() and NCR5380_bus_reset() are replaced with real new-style EH routines (the old EH SCSI constants were removed in 2.6.12-rc3). Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- arch/m68k/configs/sun3_defconfig | 1 - drivers/scsi/Kconfig | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index b96b4584735a..af903b5c5708 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -173,7 +173,6 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set -CONFIG_SUN3_SCSI=y # # Multi-device support (RAID and LVM) diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 1811cb240315..27fec8a5eb5b 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1752,7 +1752,7 @@ config SCSI_NCR53C7xx_FAST config SUN3_SCSI tristate "Sun3 NCR5380 SCSI" - depends on SUN3 && SCSI + depends on SUN3 && SCSI && BROKEN help This option will enable support for the OBIO (onboard io) NCR5380 SCSI controller found in the Sun 3/50 and 3/60, as well as for From 8d5f7b4353dae4c7ee342c61303372fd996ca161 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Jun 2005 09:45:30 +1000 Subject: [PATCH 113/160] [PATCH] radeonfb: don't blow up VGA console on load The current radeonfb memset's the framebuffer to 0 when loaded. This removes occasional artifacts but has the nasty side effect that if you load radeonfb without framebuffer console, you destroy the VGA text buffer, font, etc... radeon must not touch the framebuffer content when it doesn't "own" it. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- drivers/video/aty/radeon_base.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index ee25b9e8db60..47a6b12bc968 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -2374,10 +2374,9 @@ static int radeonfb_pci_register (struct pci_dev *pdev, } while ( rinfo->fb_base == 0 && ((rinfo->mapped_vram /=2) >= MIN_MAPPED_VRAM) ); - if (rinfo->fb_base) - memset_io(rinfo->fb_base, 0, rinfo->mapped_vram); - else { - printk (KERN_ERR "radeonfb (%s): cannot map FB\n", pci_name(rinfo->pdev)); + if (rinfo->fb_base == NULL) { + printk (KERN_ERR "radeonfb (%s): cannot map FB\n", + pci_name(rinfo->pdev)); ret = -EIO; goto err_unmap_rom; } From c0105338eb4e61e537ca34ae06921177cb6efcf0 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 11 Jun 2005 18:00:52 +0100 Subject: [PATCH 114/160] [PATCH] pwc bug fix The pwc chainsaw session left some setups not working. There is a sanity check on compression buffers that simply isn't right any more as we never allocate one. This doesn't address the email and other changes. I'll do those tomorrow if I get time, but it is the minimal fix for the code and basic feature set. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/media/pwc/pwc-if.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/usb/media/pwc/pwc-if.c b/drivers/usb/media/pwc/pwc-if.c index 5429ff3b9753..b77e65c03659 100644 --- a/drivers/usb/media/pwc/pwc-if.c +++ b/drivers/usb/media/pwc/pwc-if.c @@ -332,10 +332,6 @@ static int pwc_allocate_buffers(struct pwc_device *pdev) #endif ; } - if (kbuf == NULL) { - Err("Failed to allocate decompress table.\n"); - return -ENOMEM; - } pdev->decompress_data = kbuf; /* Allocate image buffer; double buffer for mmap() */ From c22fa3acbc2ef79ea57217643f6cd6d226963069 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 13 Jun 2005 07:15:28 -0700 Subject: [PATCH 115/160] [PATCH] spin longer for ehci port reset completion This makes the EHCI driver spin a bit longer before concluding that the port reset failed. "Obviously safe." It allows some devices to enumerate that previously didn't. We've seen a bunch of these problem reports recently, this will make some go away. As reported by Michael Zapf , some EHCI controllers seem to take forever to finish port resets and produce "port N reset error -110" type errors. Spinning a bit longer helps. Signed-off-by: David Brownell Signed-off-by: Linus Torvalds --- drivers/usb/host/ehci-hub.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 429330bc38de..d7b4f7939ded 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -439,9 +439,12 @@ static int ehci_hub_control ( /* force reset to complete */ writel (temp & ~PORT_RESET, &ehci->regs->port_status [wIndex]); + /* REVISIT: some hardware needs 550+ usec to clear + * this bit; seems too long to spin routinely... + */ retval = handshake ( &ehci->regs->port_status [wIndex], - PORT_RESET, 0, 500); + PORT_RESET, 0, 750); if (retval != 0) { ehci_err (ehci, "port %d reset error %d\n", wIndex + 1, retval); From 980802e311088fda56c16650589faa4597c695fb Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 13 Jun 2005 11:14:01 -0400 Subject: [PATCH 116/160] [PATCH] NFS: Ensure that we revalidate the cached file length for llseek(SEEK_END) This fixes a data corruption error for mail delivery applications that expect to be able to do posix locking and then append writes on NFS. Signed-off-by: Trond Myklebust Signed-off-by: Linus Torvalds --- fs/nfs/file.c | 42 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 41 insertions(+), 1 deletion(-) diff --git a/fs/nfs/file.c b/fs/nfs/file.c index f06eee6dcff5..55c907592490 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -37,6 +37,7 @@ static int nfs_file_open(struct inode *, struct file *); static int nfs_file_release(struct inode *, struct file *); +static loff_t nfs_file_llseek(struct file *file, loff_t offset, int origin); static int nfs_file_mmap(struct file *, struct vm_area_struct *); static ssize_t nfs_file_sendfile(struct file *, loff_t *, size_t, read_actor_t, void *); static ssize_t nfs_file_read(struct kiocb *, char __user *, size_t, loff_t); @@ -48,7 +49,7 @@ static int nfs_lock(struct file *filp, int cmd, struct file_lock *fl); static int nfs_flock(struct file *filp, int cmd, struct file_lock *fl); struct file_operations nfs_file_operations = { - .llseek = remote_llseek, + .llseek = nfs_file_llseek, .read = do_sync_read, .write = do_sync_write, .aio_read = nfs_file_read, @@ -114,6 +115,45 @@ nfs_file_release(struct inode *inode, struct file *filp) return NFS_PROTO(inode)->file_release(inode, filp); } +/** + * nfs_revalidate_size - Revalidate the file size + * @inode - pointer to inode struct + * @file - pointer to struct file + * + * Revalidates the file length. This is basically a wrapper around + * nfs_revalidate_inode() that takes into account the fact that we may + * have cached writes (in which case we don't care about the server's + * idea of what the file length is), or O_DIRECT (in which case we + * shouldn't trust the cache). + */ +static int nfs_revalidate_file_size(struct inode *inode, struct file *filp) +{ + struct nfs_server *server = NFS_SERVER(inode); + struct nfs_inode *nfsi = NFS_I(inode); + + if (server->flags & NFS_MOUNT_NOAC) + goto force_reval; + if (filp->f_flags & O_DIRECT) + goto force_reval; + if (nfsi->npages != 0) + return 0; + return nfs_revalidate_inode(server, inode); +force_reval: + return __nfs_revalidate_inode(server, inode); +} + +static loff_t nfs_file_llseek(struct file *filp, loff_t offset, int origin) +{ + /* origin == SEEK_END => we must revalidate the cached file length */ + if (origin == 2) { + struct inode *inode = filp->f_mapping->host; + int retval = nfs_revalidate_file_size(inode, filp); + if (retval < 0) + return (loff_t)retval; + } + return remote_llseek(filp, offset, origin); +} + /* * Flush all dirty pages, and check for write errors. * From 03722adce90a248d0bea77d390decbd05991e2d2 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Mon, 13 Jun 2005 13:57:10 -0700 Subject: [PATCH 117/160] [NET]: linux/if_tr.h needs asm/byteorder.h uses __be16, but does not directly include . Add this in, so that dhcp/net-tools token ring code can compile again. Signed-off-by: Tom Rini Signed-off-by: David S. Miller --- include/linux/if_tr.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/if_tr.h b/include/linux/if_tr.h index 6688b414c529..3fba9e2f5427 100644 --- a/include/linux/if_tr.h +++ b/include/linux/if_tr.h @@ -19,6 +19,8 @@ #ifndef _LINUX_IF_TR_H #define _LINUX_IF_TR_H +#include /* For __be16 */ + /* IEEE 802.5 Token-Ring magic constants. The frame sizes omit the preamble and FCS/CRC (frame check sequence). */ #define TR_ALEN 6 /* Octets in one token-ring addr */ From e7626486c3c4ce456b11a7944edf164ef76fc599 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 13 Jun 2005 14:24:52 -0700 Subject: [PATCH 118/160] [TCP]: Adjust TCP mem order check to new alloc_large_system_hash Signed-off-by: Andi Kleen Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index a037bafcba3c..0d9a4fd5f1a4 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2338,7 +2338,7 @@ void __init tcp_init(void) (tcp_bhash_size * sizeof(struct tcp_bind_hashbucket)); order++) ; - if (order > 4) { + if (order >= 4) { sysctl_local_port_range[0] = 32768; sysctl_local_port_range[1] = 61000; sysctl_tcp_max_tw_buckets = 180000; From 6efd8455cff1979dd081daaa1ce3d3f1764863dc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 13 Jun 2005 14:29:06 -0700 Subject: [PATCH 119/160] [IPV4]: Multipath modules need a license to prevent kernel tainting. Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- net/ipv4/multipath_drr.c | 2 ++ net/ipv4/multipath_random.c | 2 ++ net/ipv4/multipath_rr.c | 2 ++ net/ipv4/multipath_wrandom.c | 2 ++ 4 files changed, 8 insertions(+) diff --git a/net/ipv4/multipath_drr.c b/net/ipv4/multipath_drr.c index cf2e6bcf7973..c9cf8726051d 100644 --- a/net/ipv4/multipath_drr.c +++ b/net/ipv4/multipath_drr.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -247,3 +248,4 @@ static void __exit drr_exit(void) module_init(drr_init); module_exit(drr_exit); +MODULE_LICENSE("GPL"); diff --git a/net/ipv4/multipath_random.c b/net/ipv4/multipath_random.c index 805a16e47de5..5249dbe7c559 100644 --- a/net/ipv4/multipath_random.c +++ b/net/ipv4/multipath_random.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -126,3 +127,4 @@ static void __exit random_exit(void) module_init(random_init); module_exit(random_exit); +MODULE_LICENSE("GPL"); diff --git a/net/ipv4/multipath_rr.c b/net/ipv4/multipath_rr.c index 061b6b253982..b6cd2870478f 100644 --- a/net/ipv4/multipath_rr.c +++ b/net/ipv4/multipath_rr.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -93,3 +94,4 @@ static void __exit rr_exit(void) module_init(rr_init); module_exit(rr_exit); +MODULE_LICENSE("GPL"); diff --git a/net/ipv4/multipath_wrandom.c b/net/ipv4/multipath_wrandom.c index c3d2ca1a6781..bd7d75b6abe0 100644 --- a/net/ipv4/multipath_wrandom.c +++ b/net/ipv4/multipath_wrandom.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -342,3 +343,4 @@ static void __exit wrandom_exit(void) module_init(wrandom_init); module_exit(wrandom_exit); +MODULE_LICENSE("GPL"); From 979b6c135fc4d466a39d8e3ec05583e5ee30261a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 13 Jun 2005 14:30:40 -0700 Subject: [PATCH 120/160] [NET]: Move the netdev list to vger.kernel.org. From: Ralf Baechle There are archives of the old list at http://oss.sgi.com/archives/netdev Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- Documentation/networking/vortex.txt | 2 +- MAINTAINERS | 48 ++++++++++++++--------------- drivers/net/r8169.c | 2 +- net/sched/act_api.c | 2 +- 4 files changed, 27 insertions(+), 27 deletions(-) diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/vortex.txt index fa12a9e4abdd..80e1cb19609f 100644 --- a/Documentation/networking/vortex.txt +++ b/Documentation/networking/vortex.txt @@ -12,7 +12,7 @@ Don is no longer the prime maintainer of this version of the driver. Please report problems to one or more of: Andrew Morton - Netdev mailing list + Netdev mailing list Linux kernel mailing list Please note the 'Reporting and Diagnosing Problems' section at the end diff --git a/MAINTAINERS b/MAINTAINERS index 65ad8251e4bc..86ba94f16e83 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -73,7 +73,7 @@ S: Status, one of the following: 3C359 NETWORK DRIVER P: Mike Phillips M: mikep@linuxtr.net -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org L: linux-tr@linuxtr.net W: http://www.linuxtr.net S: Maintained @@ -81,13 +81,13 @@ S: Maintained 3C505 NETWORK DRIVER P: Philip Blundell M: philb@gnu.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained 3CR990 NETWORK DRIVER P: David Dillow M: dave@thedillows.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained 3W-XXXX ATA-RAID CONTROLLER DRIVER @@ -130,7 +130,7 @@ S: Maintained 8169 10/100/1000 GIGABIT ETHERNET DRIVER P: Francois Romieu M: romieu@fr.zoreil.com -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER @@ -143,7 +143,7 @@ S: Maintained 8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.] P: Paul Gortmaker M: p_gortmaker@yahoo.com -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained A2232 SERIAL BOARD DRIVER @@ -332,7 +332,7 @@ S: Maintained ARPD SUPPORT P: Jonathan Layes -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained ASUS ACPI EXTRAS DRIVER @@ -706,7 +706,7 @@ S: Orphaned DIGI RIGHTSWITCH NETWORK DRIVER P: Rick Richardson -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org W: http://www.digi.com S: Orphaned @@ -812,7 +812,7 @@ S: Maintained ETHEREXPRESS-16 NETWORK DRIVER P: Philip Blundell M: philb@gnu.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained ETHERNET BRIDGE @@ -875,7 +875,7 @@ S: Maintained FRAME RELAY DLCI/FRAD (Sangoma drivers too) P: Mike McLagan M: mike.mclagan@linux.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained FREEVXFS FILESYSTEM @@ -1215,7 +1215,7 @@ S: Maintained IPX NETWORK LAYER P: Arnaldo Carvalho de Melo M: acme@conectiva.com.br -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained IRDA SUBSYSTEM @@ -1482,7 +1482,7 @@ MARVELL MV64340 ETHERNET DRIVER P: Manish Lachwani M: Manish_Lachwani@pmc-sierra.com L: linux-mips@linux-mips.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Supported MATROX FRAMEBUFFER DRIVER @@ -1592,13 +1592,13 @@ P: Andrew Morton M: akpm@osdl.org P: Jeff Garzik M: jgarzik@pobox.com -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained NETWORKING [GENERAL] P: Networking Team -M: netdev@oss.sgi.com -L: netdev@oss.sgi.com +M: netdev@vger.kernel.org +L: netdev@vger.kernel.org S: Maintained NETWORKING [IPv4/IPv6] @@ -1614,7 +1614,7 @@ P: Hideaki YOSHIFUJI M: yoshfuji@linux-ipv6.org P: Patrick McHardy M: kaber@coreworks.de -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained IPVS @@ -1634,7 +1634,7 @@ NI5010 NETWORK DRIVER P: Jan-Pascal van Best and Andreas Mohr M: Jan-Pascal van Best M: Andreas Mohr <100.30936@germany.net> -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER @@ -1676,7 +1676,7 @@ P: Peter De Shrijver M: p2@ace.ulyssis.student.kuleuven.ac.be P: Mike Phillips M: mikep@linuxtr.net -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org L: linux-tr@linuxtr.net W: http://www.linuxtr.net S: Maintained @@ -1783,7 +1783,7 @@ S: Unmaintained PCNET32 NETWORK DRIVER P: Thomas Bogendörfer M: tsbogend@alpha.franken.de -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained PHRAM MTD DRIVER @@ -1795,7 +1795,7 @@ S: Maintained POSIX CLOCKS and TIMERS P: George Anzinger M: george@mvista.com -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Supported PNP SUPPORT @@ -1830,7 +1830,7 @@ S: Supported PRISM54 WIRELESS DRIVER P: Prism54 Development Team M: prism54-private@prism54.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org W: http://prism54.org S: Maintained @@ -2047,7 +2047,7 @@ SIS 900/7016 FAST ETHERNET DRIVER P: Daniele Venzano M: venza@brownhat.org W: http://www.brownhat.org/sis900.html -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained SIS FRAMEBUFFER DRIVER @@ -2106,7 +2106,7 @@ S: Maintained SONIC NETWORK DRIVER P: Thomas Bogendoerfer M: tsbogend@alpha.franken.de -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained SONY VAIO CONTROL DEVICE DRIVER @@ -2163,7 +2163,7 @@ S: Supported SPX NETWORK LAYER P: Jay Schulist M: jschlst@samba.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Supported SRM (Alpha) environment access @@ -2242,7 +2242,7 @@ S: Maintained TOKEN-RING NETWORK DRIVER P: Mike Phillips M: mikep@linuxtr.net -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org L: linux-tr@linuxtr.net W: http://www.linuxtr.net S: Maintained diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index b3768d844747..d6d0e43dab65 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -415,7 +415,7 @@ struct rtl8169_private { struct work_struct task; }; -MODULE_AUTHOR("Realtek and the Linux r8169 crew "); +MODULE_AUTHOR("Realtek and the Linux r8169 crew "); MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver"); module_param_array(media, int, &num_media, 0); module_param(rx_copybreak, int, 0); diff --git a/net/sched/act_api.c b/net/sched/act_api.c index cafcb084098d..914c85ff8fe6 100644 --- a/net/sched/act_api.c +++ b/net/sched/act_api.c @@ -881,7 +881,7 @@ static int __init tc_action_init(void) link_p[RTM_GETACTION-RTM_BASE].dumpit = tc_dump_action; } - printk("TC classifier action (bugs to netdev@oss.sgi.com cc " + printk("TC classifier action (bugs to netdev@vger.kernel.org cc " "hadi@cyberus.ca)\n"); return 0; } From a8fa3f0c59f8a1e1d89542cff0be5b057b684653 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 13 Jun 2005 22:35:41 +0100 Subject: [PATCH 121/160] [PATCH] ARM: 2711/1: fix compilation on PXA targets with CONFIG_PM=n Patch from Nicolas Pitre Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mach-pxa/pxa25x.c | 4 ++++ arch/arm/mach-pxa/pxa27x.c | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index b6d945a6e774..7869c3b4e62f 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -16,6 +16,7 @@ * initialization stuff for PXA machines which can be overridden later if * need be. */ +#include #include #include #include @@ -103,6 +104,7 @@ unsigned int get_lcdclk_frequency_10khz(void) EXPORT_SYMBOL(get_lcdclk_frequency_10khz); +#ifdef CONFIG_PM int pxa_cpu_pm_prepare(suspend_state_t state) { @@ -131,3 +133,5 @@ void pxa_cpu_pm_enter(suspend_state_t state) break; } } + +#endif diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index aa3c3b2ab75e..893964fb9659 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -120,6 +120,8 @@ EXPORT_SYMBOL(get_clk_frequency_khz); EXPORT_SYMBOL(get_memclk_frequency_10khz); EXPORT_SYMBOL(get_lcdclk_frequency_10khz); +#ifdef CONFIG_PM + int pxa_cpu_pm_prepare(suspend_state_t state) { switch (state) { @@ -153,6 +155,8 @@ void pxa_cpu_pm_enter(suspend_state_t state) } } +#endif + /* * device registration specific to PXA27x. */ From 84427d533076a08137779b3182a71c37bf000b27 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Mon, 13 Jun 2005 14:59:44 -0700 Subject: [PATCH 122/160] [IPV6]: Ensure to use icmpv6_socket in non-preemptive context. We saw following trace several times: |BUG: using smp_processor_id() in preemptible [00000001] code: httpd/30137 |caller is icmpv6_send+0x23/0x540 | [] smp_processor_id+0x9b/0xb8 | [] icmpv6_send+0x23/0x540 This is because of icmpv6_socket, which is the only one user of smp_processor_id() in icmpv6_send(), AFAIK. Since it should be used in non-preemptive context, let's defer the dereference after disabling preemption (by icmpv6_xmit_lock()). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- net/ipv6/icmp.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c index 8e0f569b883e..ff3ec9822e36 100644 --- a/net/ipv6/icmp.c +++ b/net/ipv6/icmp.c @@ -277,8 +277,8 @@ void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info, { struct inet6_dev *idev = NULL; struct ipv6hdr *hdr = skb->nh.ipv6h; - struct sock *sk = icmpv6_socket->sk; - struct ipv6_pinfo *np = inet6_sk(sk); + struct sock *sk; + struct ipv6_pinfo *np; struct in6_addr *saddr = NULL; struct dst_entry *dst; struct icmp6hdr tmp_hdr; @@ -358,6 +358,9 @@ void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info, if (icmpv6_xmit_lock()) return; + sk = icmpv6_socket->sk; + np = inet6_sk(sk); + if (!icmpv6_xrlim_allow(sk, type, &fl)) goto out; @@ -423,9 +426,9 @@ out: static void icmpv6_echo_reply(struct sk_buff *skb) { - struct sock *sk = icmpv6_socket->sk; + struct sock *sk; struct inet6_dev *idev; - struct ipv6_pinfo *np = inet6_sk(sk); + struct ipv6_pinfo *np; struct in6_addr *saddr = NULL; struct icmp6hdr *icmph = (struct icmp6hdr *) skb->h.raw; struct icmp6hdr tmp_hdr; @@ -454,6 +457,9 @@ static void icmpv6_echo_reply(struct sk_buff *skb) if (icmpv6_xmit_lock()) return; + sk = icmpv6_socket->sk; + np = inet6_sk(sk); + if (!fl.oif && ipv6_addr_is_multicast(&fl.fl6_dst)) fl.oif = np->mcast_oif; From 77bd91967a97e5b94ae36113efe1d9e4f68a716e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?R=E9mi=20Denis-Courmont?= Date: Mon, 13 Jun 2005 15:01:34 -0700 Subject: [PATCH 123/160] [IPv6] Don't generate temporary for TUN devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Userland layer-2 tunneling devices allocated through the TUNTAP driver (drivers/net/tun.c) have a type of ARPHRD_NONE, and have no link-layer address. The kernel complains at regular interval when IPv6 Privacy extension are enabled because it can't find an hardware address : Dec 29 11:02:04 auguste kernel: __ipv6_regen_rndid(idev=cb3e0c00): cannot get EUI64 identifier; use random bytes. IPv6 Privacy extensions should probably be disabled on that sort of device. They won't work anyway. If userland wants a more usual Ethernet-ish interface with usual IPv6 autoconfiguration, it will use a TAP device with an emulated link-layer and a random hardware address rather than a TUN device. As far as I could fine, TUN virtual device from TUNTAP is the very only sort of device using ARPHRD_NONE as kernel device type. Signed-off-by: Rémi Denis-Courmont Acked-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 7744a2592693..2720899d516c 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -372,6 +372,7 @@ static struct inet6_dev * ipv6_add_dev(struct net_device *dev) ndev->regen_timer.data = (unsigned long) ndev; if ((dev->flags&IFF_LOOPBACK) || dev->type == ARPHRD_TUNNEL || + dev->type == ARPHRD_NONE || dev->type == ARPHRD_SIT) { printk(KERN_INFO "Disabled Privacy Extensions on device %p(%s)\n", From 4243cac1e76228f7ba916d5df9e75a219352160a Mon Sep 17 00:00:00 2001 From: Vladislav Yasevich Date: Mon, 13 Jun 2005 15:10:49 -0700 Subject: [PATCH 124/160] [SCTP]: Fix bug in restart of peeled-off associations. Signed-off-by: Vladislav Yasevich Signed-off-by: Sridhar Samudrala Signed-off-by: David S. Miller --- net/sctp/socket.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 0b338eca6dc0..2a3c0e08a090 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -4686,6 +4686,7 @@ static void sctp_sock_migrate(struct sock *oldsk, struct sock *newsk, struct sctp_endpoint *newep = newsp->ep; struct sk_buff *skb, *tmp; struct sctp_ulpevent *event; + int flags = 0; /* Migrate socket buffer sizes and all the socket level options to the * new socket. @@ -4707,6 +4708,17 @@ static void sctp_sock_migrate(struct sock *oldsk, struct sock *newsk, sctp_sk(newsk)->bind_hash = pp; inet_sk(newsk)->num = inet_sk(oldsk)->num; + /* Copy the bind_addr list from the original endpoint to the new + * endpoint so that we can handle restarts properly + */ + if (assoc->peer.ipv4_address) + flags |= SCTP_ADDR4_PEERSUPP; + if (assoc->peer.ipv6_address) + flags |= SCTP_ADDR6_PEERSUPP; + sctp_bind_addr_copy(&newsp->ep->base.bind_addr, + &oldsp->ep->base.bind_addr, + SCTP_SCOPE_GLOBAL, GFP_KERNEL, flags); + /* Move any messages in the old socket's receive queue that are for the * peeled off association to the new socket's receive queue. */ From 0fd9a65a76e883b7d16e72dde3f8bf20ebc1e82a Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Mon, 13 Jun 2005 15:11:24 -0700 Subject: [PATCH 125/160] [SCTP] Support SO_BINDTODEVICE socket option on incoming packets. Signed-off-by: Neil Horman Signed-off-by: Sridhar Samudrala --- net/sctp/input.c | 49 +++++++++++++++++++++++++++++++++--------------- 1 file changed, 34 insertions(+), 15 deletions(-) diff --git a/net/sctp/input.c b/net/sctp/input.c index b719a77d66b4..fffc880a646d 100644 --- a/net/sctp/input.c +++ b/net/sctp/input.c @@ -178,6 +178,37 @@ int sctp_rcv(struct sk_buff *skb) asoc = __sctp_rcv_lookup(skb, &src, &dest, &transport); + if (!asoc) + ep = __sctp_rcv_lookup_endpoint(&dest); + + /* Retrieve the common input handling substructure. */ + rcvr = asoc ? &asoc->base : &ep->base; + sk = rcvr->sk; + + /* + * If a frame arrives on an interface and the receiving socket is + * bound to another interface, via SO_BINDTODEVICE, treat it as OOTB + */ + if (sk->sk_bound_dev_if && (sk->sk_bound_dev_if != af->skb_iif(skb))) + { + sock_put(sk); + if (asoc) { + sctp_association_put(asoc); + asoc = NULL; + } else { + sctp_endpoint_put(ep); + ep = NULL; + } + sk = sctp_get_ctl_sock(); + ep = sctp_sk(sk)->ep; + sctp_endpoint_hold(ep); + sock_hold(sk); + rcvr = &ep->base; + } + + if (atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf) + goto discard_release; + /* * RFC 2960, 8.4 - Handle "Out of the blue" Packets. * An SCTP packet is called an "out of the blue" (OOTB) @@ -187,22 +218,12 @@ int sctp_rcv(struct sk_buff *skb) * packet belongs. */ if (!asoc) { - ep = __sctp_rcv_lookup_endpoint(&dest); if (sctp_rcv_ootb(skb)) { SCTP_INC_STATS_BH(SCTP_MIB_OUTOFBLUES); goto discard_release; } } - /* Retrieve the common input handling substructure. */ - rcvr = asoc ? &asoc->base : &ep->base; - sk = rcvr->sk; - - if ((sk) && (atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf)) { - goto discard_release; - } - - /* SCTP seems to always need a timestamp right now (FIXME) */ if (skb->stamp.tv_sec == 0) { do_gettimeofday(&skb->stamp); @@ -265,13 +286,11 @@ discard_it: discard_release: /* Release any structures we may be holding. */ - if (asoc) { - sock_put(asoc->base.sk); + sock_put(sk); + if (asoc) sctp_association_put(asoc); - } else { - sock_put(ep->base.sk); + else sctp_endpoint_put(ep); - } goto discard_it; } From bca735bd0d5969497704a125b05344b92155172f Mon Sep 17 00:00:00 2001 From: Vladislav Yasevich Date: Mon, 13 Jun 2005 15:11:57 -0700 Subject: [PATCH 126/160] [SCTP] Extend the info exported via /proc/net/sctp to support netstat for SCTP. Signed-off-by: Vladislav Yasevich Signed-off-by: Sridhar Samudrala Signed-off-by: David S. Miller --- net/sctp/proc.c | 190 +++++++++++++++++++++++++++++++++++++----------- 1 file changed, 149 insertions(+), 41 deletions(-) diff --git a/net/sctp/proc.c b/net/sctp/proc.c index e42fd8c2916b..98d49ec9b74b 100644 --- a/net/sctp/proc.c +++ b/net/sctp/proc.c @@ -132,14 +132,25 @@ void sctp_snmp_proc_exit(void) static void sctp_seq_dump_local_addrs(struct seq_file *seq, struct sctp_ep_common *epb) { struct list_head *pos; + struct sctp_association *asoc; struct sctp_sockaddr_entry *laddr; - union sctp_addr *addr; + struct sctp_transport *peer; + union sctp_addr *addr, *primary = NULL; struct sctp_af *af; + if (epb->type == SCTP_EP_TYPE_ASSOCIATION) { + asoc = sctp_assoc(epb); + peer = asoc->peer.primary_path; + primary = &peer->saddr; + } + list_for_each(pos, &epb->bind_addr.address_list) { laddr = list_entry(pos, struct sctp_sockaddr_entry, list); addr = (union sctp_addr *)&laddr->a; af = sctp_get_af_specific(addr->sa.sa_family); + if (primary && af->cmp_addr(addr, primary)) { + seq_printf(seq, "*"); + } af->seq_dump_addr(seq, addr); } } @@ -149,17 +160,54 @@ static void sctp_seq_dump_remote_addrs(struct seq_file *seq, struct sctp_associa { struct list_head *pos; struct sctp_transport *transport; - union sctp_addr *addr; + union sctp_addr *addr, *primary; struct sctp_af *af; + primary = &(assoc->peer.primary_addr); list_for_each(pos, &assoc->peer.transport_addr_list) { transport = list_entry(pos, struct sctp_transport, transports); addr = (union sctp_addr *)&transport->ipaddr; af = sctp_get_af_specific(addr->sa.sa_family); + if (af->cmp_addr(addr, primary)) { + seq_printf(seq, "*"); + } af->seq_dump_addr(seq, addr); } } +static void * sctp_eps_seq_start(struct seq_file *seq, loff_t *pos) +{ + if (*pos > sctp_ep_hashsize) + return NULL; + + if (*pos < 0) + *pos = 0; + + if (*pos == 0) + seq_printf(seq, " ENDPT SOCK STY SST HBKT LPORT UID INODE LADDRS\n"); + + ++*pos; + + return (void *)pos; +} + +static void sctp_eps_seq_stop(struct seq_file *seq, void *v) +{ + return; +} + + +static void * sctp_eps_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + if (*pos > sctp_ep_hashsize) + return NULL; + + ++*pos; + + return pos; +} + + /* Display sctp endpoints (/proc/net/sctp/eps). */ static int sctp_eps_seq_show(struct seq_file *seq, void *v) { @@ -167,38 +215,50 @@ static int sctp_eps_seq_show(struct seq_file *seq, void *v) struct sctp_ep_common *epb; struct sctp_endpoint *ep; struct sock *sk; - int hash; + int hash = *(int *)v; - seq_printf(seq, " ENDPT SOCK STY SST HBKT LPORT LADDRS\n"); - for (hash = 0; hash < sctp_ep_hashsize; hash++) { - head = &sctp_ep_hashtable[hash]; - read_lock(&head->lock); - for (epb = head->chain; epb; epb = epb->next) { - ep = sctp_ep(epb); - sk = epb->sk; - seq_printf(seq, "%8p %8p %-3d %-3d %-4d %-5d ", ep, sk, - sctp_sk(sk)->type, sk->sk_state, hash, - epb->bind_addr.port); - sctp_seq_dump_local_addrs(seq, epb); - seq_printf(seq, "\n"); - } - read_unlock(&head->lock); + if (hash > sctp_ep_hashsize) + return -ENOMEM; + + head = &sctp_ep_hashtable[hash-1]; + sctp_local_bh_disable(); + read_lock(&head->lock); + for (epb = head->chain; epb; epb = epb->next) { + ep = sctp_ep(epb); + sk = epb->sk; + seq_printf(seq, "%8p %8p %-3d %-3d %-4d %-5d %5d %5lu ", ep, sk, + sctp_sk(sk)->type, sk->sk_state, hash-1, + epb->bind_addr.port, + sock_i_uid(sk), sock_i_ino(sk)); + + sctp_seq_dump_local_addrs(seq, epb); + seq_printf(seq, "\n"); } + read_unlock(&head->lock); + sctp_local_bh_enable(); return 0; } +static struct seq_operations sctp_eps_ops = { + .start = sctp_eps_seq_start, + .next = sctp_eps_seq_next, + .stop = sctp_eps_seq_stop, + .show = sctp_eps_seq_show, +}; + + /* Initialize the seq file operations for 'eps' object. */ static int sctp_eps_seq_open(struct inode *inode, struct file *file) { - return single_open(file, sctp_eps_seq_show, NULL); + return seq_open(file, &sctp_eps_ops); } static struct file_operations sctp_eps_seq_fops = { .open = sctp_eps_seq_open, .read = seq_read, .llseek = seq_lseek, - .release = single_release, + .release = seq_release, }; /* Set up the proc fs entry for 'eps' object. */ @@ -221,6 +281,40 @@ void sctp_eps_proc_exit(void) remove_proc_entry("eps", proc_net_sctp); } + +static void * sctp_assocs_seq_start(struct seq_file *seq, loff_t *pos) +{ + if (*pos > sctp_assoc_hashsize) + return NULL; + + if (*pos < 0) + *pos = 0; + + if (*pos == 0) + seq_printf(seq, " ASSOC SOCK STY SST ST HBKT ASSOC-ID TX_QUEUE RX_QUEUE UID INODE LPORT " + "RPORT LADDRS <-> RADDRS\n"); + + ++*pos; + + return (void *)pos; +} + +static void sctp_assocs_seq_stop(struct seq_file *seq, void *v) +{ + return; +} + + +static void * sctp_assocs_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + if (*pos > sctp_assoc_hashsize) + return NULL; + + ++*pos; + + return pos; +} + /* Display sctp associations (/proc/net/sctp/assocs). */ static int sctp_assocs_seq_show(struct seq_file *seq, void *v) { @@ -228,43 +322,57 @@ static int sctp_assocs_seq_show(struct seq_file *seq, void *v) struct sctp_ep_common *epb; struct sctp_association *assoc; struct sock *sk; - int hash; + int hash = *(int *)v; - seq_printf(seq, " ASSOC SOCK STY SST ST HBKT LPORT RPORT " - "LADDRS <-> RADDRS\n"); - for (hash = 0; hash < sctp_assoc_hashsize; hash++) { - head = &sctp_assoc_hashtable[hash]; - read_lock(&head->lock); - for (epb = head->chain; epb; epb = epb->next) { - assoc = sctp_assoc(epb); - sk = epb->sk; - seq_printf(seq, - "%8p %8p %-3d %-3d %-2d %-4d %-5d %-5d ", - assoc, sk, sctp_sk(sk)->type, sk->sk_state, - assoc->state, hash, epb->bind_addr.port, - assoc->peer.port); - sctp_seq_dump_local_addrs(seq, epb); - seq_printf(seq, "<-> "); - sctp_seq_dump_remote_addrs(seq, assoc); - seq_printf(seq, "\n"); - } - read_unlock(&head->lock); + if (hash > sctp_assoc_hashsize) + return -ENOMEM; + + head = &sctp_assoc_hashtable[hash-1]; + sctp_local_bh_disable(); + read_lock(&head->lock); + for (epb = head->chain; epb; epb = epb->next) { + assoc = sctp_assoc(epb); + sk = epb->sk; + seq_printf(seq, + "%8p %8p %-3d %-3d %-2d %-4d %4d %8d %8d %7d %5lu %-5d %5d ", + assoc, sk, sctp_sk(sk)->type, sk->sk_state, + assoc->state, hash-1, assoc->assoc_id, + (sk->sk_rcvbuf - assoc->rwnd), + assoc->sndbuf_used, + sock_i_uid(sk), sock_i_ino(sk), + epb->bind_addr.port, + assoc->peer.port); + + seq_printf(seq, " "); + sctp_seq_dump_local_addrs(seq, epb); + seq_printf(seq, "<-> "); + sctp_seq_dump_remote_addrs(seq, assoc); + seq_printf(seq, "\n"); } + read_unlock(&head->lock); + sctp_local_bh_enable(); return 0; } +static struct seq_operations sctp_assoc_ops = { + .start = sctp_assocs_seq_start, + .next = sctp_assocs_seq_next, + .stop = sctp_assocs_seq_stop, + .show = sctp_assocs_seq_show, +}; + /* Initialize the seq file operations for 'assocs' object. */ static int sctp_assocs_seq_open(struct inode *inode, struct file *file) { - return single_open(file, sctp_assocs_seq_show, NULL); + return seq_open(file, &sctp_assoc_ops); } static struct file_operations sctp_assocs_seq_fops = { .open = sctp_assocs_seq_open, .read = seq_read, .llseek = seq_lseek, - .release = single_release, + .release = seq_release, }; /* Set up the proc fs entry for 'assocs' object. */ From cdac4e07748934e37e415437055ed591aed9eb21 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Mon, 13 Jun 2005 15:12:33 -0700 Subject: [PATCH 127/160] [SCTP] Add support for ip_nonlocal_bind sysctl & IP_FREEBIND socket option Signed-off-by: Neil Horman Signed-off-by: Sridhar Samudrala Signed-off-by: David S. Miller --- include/net/ip.h | 1 + net/ipv4/af_inet.c | 1 + net/sctp/protocol.c | 7 +++++-- 3 files changed, 7 insertions(+), 2 deletions(-) diff --git a/include/net/ip.h b/include/net/ip.h index 3f63992eb712..32360bbe143f 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -163,6 +163,7 @@ DECLARE_SNMP_STAT(struct linux_mib, net_statistics); extern int sysctl_local_port_range[2]; extern int sysctl_ip_default_ttl; +extern int sysctl_ip_nonlocal_bind; #ifdef CONFIG_INET /* The function in 2.2 was invalid, producing wrong result for diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index b3cb49ce5fad..03942f133944 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1181,6 +1181,7 @@ EXPORT_SYMBOL(inet_stream_connect); EXPORT_SYMBOL(inet_stream_ops); EXPORT_SYMBOL(inet_unregister_protosw); EXPORT_SYMBOL(net_statistics); +EXPORT_SYMBOL(sysctl_ip_nonlocal_bind); #ifdef INET_REFCNT_DEBUG EXPORT_SYMBOL(inet_sock_nr); diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 2e1f9c3556f5..5135e1a25d25 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -378,10 +378,13 @@ static int sctp_v4_available(union sctp_addr *addr, struct sctp_sock *sp) { int ret = inet_addr_type(addr->v4.sin_addr.s_addr); - /* FIXME: ip_nonlocal_bind sysctl support. */ - if (addr->v4.sin_addr.s_addr != INADDR_ANY && ret != RTN_LOCAL) + if (addr->v4.sin_addr.s_addr != INADDR_ANY && + ret != RTN_LOCAL && + !sp->inet.freebind && + !sysctl_ip_nonlocal_bind) return 0; + return 1; } From 6a6ddb2a9c11fcc3e8d7517841d28c9ea206ddef Mon Sep 17 00:00:00 2001 From: Sridhar Samudrala Date: Mon, 13 Jun 2005 15:13:05 -0700 Subject: [PATCH 128/160] [SCTP] Fix incorrect setting of sk_bound_dev_if when binding/sending to a ipv6 link local address. Signed-off-by: Sridhar Samudrala Signed-off-by: David S. Miller --- net/sctp/ipv6.c | 36 +++++++++++++++--------------------- 1 file changed, 15 insertions(+), 21 deletions(-) diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c index c9d9ea064734..c7e42d125b9c 100644 --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -812,26 +812,23 @@ static int sctp_inet6_bind_verify(struct sctp_sock *opt, union sctp_addr *addr) if (addr->sa.sa_family != AF_INET6) af = sctp_get_af_specific(addr->sa.sa_family); else { - struct sock *sk; int type = ipv6_addr_type(&addr->v6.sin6_addr); - sk = sctp_opt2sk(opt); - if (type & IPV6_ADDR_LINKLOCAL) { - /* Note: Behavior similar to af_inet6.c: - * 1) Overrides previous bound_dev_if - * 2) Destructive even if bind isn't successful. - */ + struct net_device *dev; - if (addr->v6.sin6_scope_id) - sk->sk_bound_dev_if = addr->v6.sin6_scope_id; - if (!sk->sk_bound_dev_if) + if (type & IPV6_ADDR_LINKLOCAL) { + if (!addr->v6.sin6_scope_id) return 0; + dev = dev_get_by_index(addr->v6.sin6_scope_id); + if (!dev) + return 0; + dev_put(dev); } af = opt->pf->af; } return af->available(addr, opt); } -/* Verify that the provided sockaddr looks bindable. Common verification, +/* Verify that the provided sockaddr looks sendable. Common verification, * has already been taken care of. */ static int sctp_inet6_send_verify(struct sctp_sock *opt, union sctp_addr *addr) @@ -842,19 +839,16 @@ static int sctp_inet6_send_verify(struct sctp_sock *opt, union sctp_addr *addr) if (addr->sa.sa_family != AF_INET6) af = sctp_get_af_specific(addr->sa.sa_family); else { - struct sock *sk; int type = ipv6_addr_type(&addr->v6.sin6_addr); - sk = sctp_opt2sk(opt); - if (type & IPV6_ADDR_LINKLOCAL) { - /* Note: Behavior similar to af_inet6.c: - * 1) Overrides previous bound_dev_if - * 2) Destructive even if bind isn't successful. - */ + struct net_device *dev; - if (addr->v6.sin6_scope_id) - sk->sk_bound_dev_if = addr->v6.sin6_scope_id; - if (!sk->sk_bound_dev_if) + if (type & IPV6_ADDR_LINKLOCAL) { + if (!addr->v6.sin6_scope_id) return 0; + dev = dev_get_by_index(addr->v6.sin6_scope_id); + if (!dev) + return 0; + dev_put(dev); } af = opt->pf->af; } From 1c2fb7f93cb20621772bf304f3dba0849942e5db Mon Sep 17 00:00:00 2001 From: "J. Simonetti" Date: Mon, 13 Jun 2005 15:19:03 -0700 Subject: [PATCH 129/160] [IPV4]: Sysctl configurable icmp error source address. This patch alows you to change the source address of icmp error messages. It applies cleanly to 2.6.11.11 and retains the default behaviour. In the old (default) behaviour icmp error messages are sent with the ip of the exiting interface. The new behaviour (when the sysctl variable is toggled on), it will send the message with the ip of the interface that received the packet that caused the icmp error. This is the behaviour network administrators will expect from a router. It makes debugging complicated network layouts much easier. Also, all 'vendor routers' I know of have the later behaviour. Signed-off-by: David S. Miller --- include/linux/sysctl.h | 1 + net/ipv4/icmp.c | 9 +++++++-- net/ipv4/sysctl_net_ipv4.c | 9 +++++++++ 3 files changed, 17 insertions(+), 2 deletions(-) diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index 23032d9d6071..a17745c80a91 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -346,6 +346,7 @@ enum NET_TCP_MODERATE_RCVBUF=106, NET_TCP_TSO_WIN_DIVISOR=107, NET_TCP_BIC_BETA=108, + NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR=109, }; enum { diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c index 85bf0d3e294b..cb759484979d 100644 --- a/net/ipv4/icmp.c +++ b/net/ipv4/icmp.c @@ -207,6 +207,7 @@ int sysctl_icmp_ignore_bogus_error_responses; int sysctl_icmp_ratelimit = 1 * HZ; int sysctl_icmp_ratemask = 0x1818; +int sysctl_icmp_errors_use_inbound_ifaddr; /* * ICMP control array. This specifies what to do with each ICMP. @@ -511,8 +512,12 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, u32 info) */ saddr = iph->daddr; - if (!(rt->rt_flags & RTCF_LOCAL)) - saddr = 0; + if (!(rt->rt_flags & RTCF_LOCAL)) { + if (sysctl_icmp_errors_use_inbound_ifaddr) + saddr = inet_select_addr(skb_in->dev, 0, RT_SCOPE_LINK); + else + saddr = 0; + } tos = icmp_pointers[type].error ? ((iph->tos & IPTOS_TOS_MASK) | IPTOS_PREC_INTERNETCONTROL) : diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index 3aafb298c1c1..23068bddbf0b 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -23,6 +23,7 @@ extern int sysctl_ip_nonlocal_bind; extern int sysctl_icmp_echo_ignore_all; extern int sysctl_icmp_echo_ignore_broadcasts; extern int sysctl_icmp_ignore_bogus_error_responses; +extern int sysctl_icmp_errors_use_inbound_ifaddr; /* From ip_fragment.c */ extern int sysctl_ipfrag_low_thresh; @@ -395,6 +396,14 @@ ctl_table ipv4_table[] = { .mode = 0644, .proc_handler = &proc_dointvec }, + { + .ctl_name = NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR, + .procname = "icmp_errors_use_inbound_ifaddr", + .data = &sysctl_icmp_errors_use_inbound_ifaddr, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec + }, { .ctl_name = NET_IPV4_ROUTE, .procname = "route", From cbd83da82b15292337ff2b71e619c9a3a95f6d80 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 13 Jun 2005 17:51:55 -0700 Subject: [PATCH 130/160] Update DCO ("signoff") rules to 1.1 This adds a clause that notes explicitly that the person doing the sign-off knows that the project (and his sign-off) is public and will possibly get archived and re-distributed. --- Documentation/SubmittingPatches | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 9838d32b2fe7..4d35562b1cf9 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -271,7 +271,7 @@ patch, which certifies that you wrote it or otherwise have the right to pass it on as a open-source patch. The rules are pretty simple: if you can certify the below: - Developer's Certificate of Origin 1.0 + Developer's Certificate of Origin 1.1 By making a contribution to this project, I certify that: @@ -291,6 +291,12 @@ can certify the below: person who certified (a), (b) or (c) and I have not modified it. + (d) I understand and agree that this project and the contribution + are public and that a record of the contribution (including all + personal information I submit with it, including my sign-off) is + maintained indefinitely and may be redistributed consistent with + this project or the open source license(s) involved. + then you just add a line saying Signed-off-by: Random J Developer From a96aca88ac71f75e566981b554da44bfd0d111e8 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 13 Jun 2005 18:27:13 -0700 Subject: [PATCH 131/160] [NETFILTER]: Advance seq-file position in exp_next_seq() Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/ipv4/netfilter/ip_conntrack_standalone.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/netfilter/ip_conntrack_standalone.c b/net/ipv4/netfilter/ip_conntrack_standalone.c index 46ca45f74d85..bc59f7b39805 100644 --- a/net/ipv4/netfilter/ip_conntrack_standalone.c +++ b/net/ipv4/netfilter/ip_conntrack_standalone.c @@ -256,6 +256,7 @@ static void *exp_seq_next(struct seq_file *s, void *v, loff_t *pos) { struct list_head *e = v; + ++*pos; e = e->next; if (e == &ip_conntrack_expect_list) From 8447f3f4659d91c2f11a1476522369c9d6ae6ada Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 13 Jun 2005 15:52:04 -0700 Subject: [PATCH 132/160] [PATCH] uml: remove duplicate includes A few files include the same header twice. Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/main.c | 2 -- arch/um/kernel/process.c | 1 - arch/um/kernel/um_arch.c | 1 - 3 files changed, 4 deletions(-) diff --git a/arch/um/kernel/main.c b/arch/um/kernel/main.c index e42e6364ca13..e59f58152678 100644 --- a/arch/um/kernel/main.c +++ b/arch/um/kernel/main.c @@ -24,8 +24,6 @@ #include "mode.h" #include "choose-mode.h" #include "uml-config.h" -#include "irq_user.h" -#include "time_user.h" #include "os.h" /* Set in set_stklim, which is called from main and __wrap_malloc. diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c index 51f8e5a8ac6a..793c77c6ef9c 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/kernel/process.c @@ -30,7 +30,6 @@ #include "init.h" #include "os.h" #include "uml-config.h" -#include "ptrace_user.h" #include "choose-mode.h" #include "mode.h" #ifdef UML_CONFIG_MODE_SKAS diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 418427107b29..8736d098f0ee 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -26,7 +26,6 @@ #include "asm/setup.h" #include "ubd_user.h" #include "asm/current.h" -#include "asm/setup.h" #include "user_util.h" #include "kern_util.h" #include "kern.h" From 36ca1195ad7f760a6af3814cb002bd3a3d4b4db1 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 13 Jun 2005 15:52:10 -0700 Subject: [PATCH 133/160] [PATCH] uml: build cleanups Fix a build failure when CONFIG_MODE_SKAS is disabled and make a Makefile comment fit in 80 columns. Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/sysdep-i386/ptrace.h | 5 ++--- arch/um/scripts/Makefile.rules | 2 +- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/um/include/sysdep-i386/ptrace.h b/arch/um/include/sysdep-i386/ptrace.h index 6eaeb9919983..c8ee9559f3ab 100644 --- a/arch/um/include/sysdep-i386/ptrace.h +++ b/arch/um/include/sysdep-i386/ptrace.h @@ -8,6 +8,8 @@ #include "uml-config.h" #include "user_constants.h" +#include "sysdep/faultinfo.h" +#include "choose-mode.h" #define MAX_REG_NR (UM_FRAME_SIZE / sizeof(unsigned long)) #define MAX_REG_OFFSET (UM_FRAME_SIZE) @@ -58,9 +60,6 @@ extern int sysemu_supported; #define PTRACE_SYSEMU_SINGLESTEP 32 #endif -#include "sysdep/faultinfo.h" -#include "choose-mode.h" - union uml_pt_regs { #ifdef UML_CONFIG_MODE_TT struct tt_regs { diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules index 0b2491883d9c..98346c711493 100644 --- a/arch/um/scripts/Makefile.rules +++ b/arch/um/scripts/Makefile.rules @@ -14,7 +14,7 @@ quiet_cmd_make_link = SYMLINK $@ cmd_make_link = ln -sf $(srctree)/arch/$(SUBARCH)/$($(notdir $@)-dir)/$(notdir $@) $@ # this needs to be before the foreach, because targets does not accept -# complete paths like $(obj)/$(f). To make sure this works, use a := assignment, +# complete paths like $(obj)/$(f). To make sure this works, use a := assignment # or we will get $(obj)/$(f) in the "targets" value. # Also, this forces you to use the := syntax when assigning to targets. # Otherwise the line below will cause an infinite loop (if you don't know why, From 98fdffccea6cc3fe9dba32c0fcc310bcb5d71529 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 13 Jun 2005 15:52:14 -0700 Subject: [PATCH 134/160] [PATCH] uml: use fork instead of clone Convert the boot-time host ptrace testing from clone to fork. They were essentially doing fork anyway. This cleans up the code a bit, and makes valgrind a bit happier about grinding it. Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/process.c | 48 ++++++++++++++++------------------------ 1 file changed, 19 insertions(+), 29 deletions(-) diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c index 793c77c6ef9c..1b5ef3e96c71 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/kernel/process.c @@ -130,7 +130,7 @@ int start_fork_tramp(void *thread_arg, unsigned long temp_stack, return(arg.pid); } -static int ptrace_child(void *arg) +static int ptrace_child(void) { int ret; int pid = os_getpid(), ppid = getppid(); @@ -159,20 +159,16 @@ static int ptrace_child(void *arg) _exit(ret); } -static int start_ptraced_child(void **stack_out) +static int start_ptraced_child(void) { - void *stack; - unsigned long sp; int pid, n, status; - stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC, - MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); - if(stack == MAP_FAILED) - panic("check_ptrace : mmap failed, errno = %d", errno); - sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *); - pid = clone(ptrace_child, (void *) sp, SIGCHLD, NULL); + pid = fork(); + if(pid == 0) + ptrace_child(); + if(pid < 0) - panic("check_ptrace : clone failed, errno = %d", errno); + panic("check_ptrace : fork failed, errno = %d", errno); CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); if(n < 0) panic("check_ptrace : wait failed, errno = %d", errno); @@ -180,7 +176,6 @@ static int start_ptraced_child(void **stack_out) panic("check_ptrace : expected SIGSTOP, got status = %d", status); - *stack_out = stack; return(pid); } @@ -188,12 +183,12 @@ static int start_ptraced_child(void **stack_out) * just avoid using sysemu, not panic, but only if SYSEMU features are broken. * So only for SYSEMU features we test mustpanic, while normal host features * must work anyway!*/ -static int stop_ptraced_child(int pid, void *stack, int exitcode, int mustpanic) +static int stop_ptraced_child(int pid, int exitcode, int mustexit) { int status, n, ret = 0; if(ptrace(PTRACE_CONT, pid, 0, 0) < 0) - panic("check_ptrace : ptrace failed, errno = %d", errno); + panic("stop_ptraced_child : ptrace failed, errno = %d", errno); CATCH_EINTR(n = waitpid(pid, &status, 0)); if(!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) { int exit_with = WEXITSTATUS(status); @@ -204,15 +199,13 @@ static int stop_ptraced_child(int pid, void *stack, int exitcode, int mustpanic) printk("check_ptrace : child exited with exitcode %d, while " "expecting %d; status 0x%x", exit_with, exitcode, status); - if (mustpanic) + if (mustexit) panic("\n"); else printk("\n"); ret = -1; } - if(munmap(stack, PAGE_SIZE) < 0) - panic("check_ptrace : munmap failed, errno = %d", errno); return ret; } @@ -234,12 +227,11 @@ __uml_setup("nosysemu", nosysemu_cmd_param, static void __init check_sysemu(void) { - void *stack; int pid, syscall, n, status, count=0; printk("Checking syscall emulation patch for ptrace..."); sysemu_supported = 0; - pid = start_ptraced_child(&stack); + pid = start_ptraced_child(); if(ptrace(PTRACE_SYSEMU, pid, 0, 0) < 0) goto fail; @@ -257,7 +249,7 @@ static void __init check_sysemu(void) panic("check_sysemu : failed to modify system " "call return, errno = %d", errno); - if (stop_ptraced_child(pid, stack, 0, 0) < 0) + if (stop_ptraced_child(pid, 0, 0) < 0) goto fail_stopped; sysemu_supported = 1; @@ -265,7 +257,7 @@ static void __init check_sysemu(void) set_using_sysemu(!force_sysemu_disabled); printk("Checking advanced syscall emulation patch for ptrace..."); - pid = start_ptraced_child(&stack); + pid = start_ptraced_child(); while(1){ count++; if(ptrace(PTRACE_SYSEMU_SINGLESTEP, pid, 0, 0) < 0) @@ -290,7 +282,7 @@ static void __init check_sysemu(void) break; } } - if (stop_ptraced_child(pid, stack, 0, 0) < 0) + if (stop_ptraced_child(pid, 0, 0) < 0) goto fail_stopped; sysemu_supported = 2; @@ -301,18 +293,17 @@ static void __init check_sysemu(void) return; fail: - stop_ptraced_child(pid, stack, 1, 0); + stop_ptraced_child(pid, 1, 0); fail_stopped: printk("missing\n"); } void __init check_ptrace(void) { - void *stack; int pid, syscall, n, status; printk("Checking that ptrace can change system call numbers..."); - pid = start_ptraced_child(&stack); + pid = start_ptraced_child(); if (ptrace(PTRACE_OLDSETOPTIONS, pid, 0, (void *)PTRACE_O_TRACESYSGOOD) < 0) panic("check_ptrace: PTRACE_SETOPTIONS failed, errno = %d", errno); @@ -339,7 +330,7 @@ void __init check_ptrace(void) break; } } - stop_ptraced_child(pid, stack, 0, 1); + stop_ptraced_child(pid, 0, 1); printk("OK\n"); check_sysemu(); } @@ -371,11 +362,10 @@ void forward_pending_sigio(int target) static inline int check_skas3_ptrace_support(void) { struct ptrace_faultinfo fi; - void *stack; int pid, n, ret = 1; printf("Checking for the skas3 patch in the host..."); - pid = start_ptraced_child(&stack); + pid = start_ptraced_child(); n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi); if (n < 0) { @@ -390,7 +380,7 @@ static inline int check_skas3_ptrace_support(void) } init_registers(pid); - stop_ptraced_child(pid, stack, 1, 1); + stop_ptraced_child(pid, 1, 1); return(ret); } From a3c77c67a443e631febf708bb0c376caede31657 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 13 Jun 2005 15:52:18 -0700 Subject: [PATCH 135/160] [PATCH] uml: slirp and slip driver cleanups and fixes This patch merges a lot of duplicated code in the slip and slirp drivers, abstracts out the slip protocol, and makes the slip driver work in 2.6. Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/Makefile | 6 +- arch/um/drivers/slip.h | 23 +-- arch/um/drivers/slip_common.c | 54 +++++++ .../drivers/{slip_proto.h => slip_common.h} | 44 +++-- arch/um/drivers/slip_kern.c | 12 +- arch/um/drivers/slip_user.c | 152 ++++++++---------- arch/um/drivers/slirp.h | 26 +-- arch/um/drivers/slirp_kern.c | 5 +- arch/um/drivers/slirp_user.c | 100 +++--------- 9 files changed, 179 insertions(+), 243 deletions(-) create mode 100644 arch/um/drivers/slip_common.c rename arch/um/drivers/{slip_proto.h => slip_common.h} (65%) diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile index 323f72c64cd2..b2de9916c32c 100644 --- a/arch/um/drivers/Makefile +++ b/arch/um/drivers/Makefile @@ -22,8 +22,8 @@ obj-y := stdio_console.o fd.o chan_kern.o chan_user.o line.o obj-$(CONFIG_SSL) += ssl.o obj-$(CONFIG_STDERR_CONSOLE) += stderr_console.o -obj-$(CONFIG_UML_NET_SLIP) += slip.o -obj-$(CONFIG_UML_NET_SLIRP) += slirp.o +obj-$(CONFIG_UML_NET_SLIP) += slip.o slip_common.o +obj-$(CONFIG_UML_NET_SLIRP) += slirp.o slip_common.o obj-$(CONFIG_UML_NET_DAEMON) += daemon.o obj-$(CONFIG_UML_NET_MCAST) += mcast.o #obj-$(CONFIG_UML_NET_PCAP) += pcap.o $(PCAP) @@ -41,6 +41,6 @@ obj-$(CONFIG_UML_WATCHDOG) += harddog.o obj-$(CONFIG_BLK_DEV_COW_COMMON) += cow_user.o obj-$(CONFIG_UML_RANDOM) += random.o -USER_OBJS := fd.o null.o pty.o tty.o xterm.o +USER_OBJS := fd.o null.o pty.o tty.o xterm.o slip_common.o include arch/um/scripts/Makefile.rules diff --git a/arch/um/drivers/slip.h b/arch/um/drivers/slip.h index d523618cd5ac..bb0dab41c2e4 100644 --- a/arch/um/drivers/slip.h +++ b/arch/um/drivers/slip.h @@ -1,10 +1,7 @@ #ifndef __UM_SLIP_H #define __UM_SLIP_H -#define BUF_SIZE 1500 - /* two bytes each for a (pathological) max packet of escaped chars + * - * terminating END char + initial END char */ -#define ENC_BUF_SIZE (2 * BUF_SIZE + 2) +#include "slip_common.h" struct slip_data { void *dev; @@ -12,28 +9,12 @@ struct slip_data { char *addr; char *gate_addr; int slave; - unsigned char ibuf[ENC_BUF_SIZE]; - unsigned char obuf[ENC_BUF_SIZE]; - int more; /* more data: do not read fd until ibuf has been drained */ - int pos; - int esc; + struct slip_proto slip; }; extern struct net_user_info slip_user_info; -extern int set_umn_addr(int fd, char *addr, char *ptp_addr); extern int slip_user_read(int fd, void *buf, int len, struct slip_data *pri); extern int slip_user_write(int fd, void *buf, int len, struct slip_data *pri); #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/drivers/slip_common.c b/arch/um/drivers/slip_common.c new file mode 100644 index 000000000000..e89cfc68fc3e --- /dev/null +++ b/arch/um/drivers/slip_common.c @@ -0,0 +1,54 @@ +#include +#include "slip_common.h" +#include "net_user.h" + +int slip_proto_read(int fd, void *buf, int len, struct slip_proto *slip) +{ + int i, n, size, start; + + if(slip->more > 0){ + i = 0; + while(i < slip->more){ + size = slip_unesc(slip->ibuf[i++], slip->ibuf, + &slip->pos, &slip->esc); + if(size){ + memcpy(buf, slip->ibuf, size); + memmove(slip->ibuf, &slip->ibuf[i], + slip->more - i); + slip->more = slip->more - i; + return size; + } + } + slip->more = 0; + } + + n = net_read(fd, &slip->ibuf[slip->pos], + sizeof(slip->ibuf) - slip->pos); + if(n <= 0) + return n; + + start = slip->pos; + for(i = 0; i < n; i++){ + size = slip_unesc(slip->ibuf[start + i], slip->ibuf,&slip->pos, + &slip->esc); + if(size){ + memcpy(buf, slip->ibuf, size); + memmove(slip->ibuf, &slip->ibuf[start+i+1], + n - (i + 1)); + slip->more = n - (i + 1); + return size; + } + } + return 0; +} + +int slip_proto_write(int fd, void *buf, int len, struct slip_proto *slip) +{ + int actual, n; + + actual = slip_esc(buf, slip->obuf, len); + n = net_write(fd, slip->obuf, actual); + if(n < 0) + return n; + else return len; +} diff --git a/arch/um/drivers/slip_proto.h b/arch/um/drivers/slip_common.h similarity index 65% rename from arch/um/drivers/slip_proto.h rename to arch/um/drivers/slip_common.h index 4c4d94a33100..2ae76d8f1be1 100644 --- a/arch/um/drivers/slip_proto.h +++ b/arch/um/drivers/slip_common.h @@ -1,10 +1,10 @@ -/* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ +#ifndef __UM_SLIP_COMMON_H +#define __UM_SLIP_COMMON_H -#ifndef __UM_SLIP_PROTO_H__ -#define __UM_SLIP_PROTO_H__ +#define BUF_SIZE 1500 + /* two bytes each for a (pathological) max packet of escaped chars + * + * terminating END char + initial END char */ +#define ENC_BUF_SIZE (2 * BUF_SIZE + 2) /* SLIP protocol characters. */ #define SLIP_END 0300 /* indicates end of frame */ @@ -80,15 +80,25 @@ static inline int slip_esc(unsigned char *s, unsigned char *d, int len) return (ptr - d); } -#endif +struct slip_proto { + unsigned char ibuf[ENC_BUF_SIZE]; + unsigned char obuf[ENC_BUF_SIZE]; + int more; /* more data: do not read fd until ibuf has been drained */ + int pos; + int esc; +}; -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ +#define SLIP_PROTO_INIT { \ + .ibuf = { '\0' }, \ + .obuf = { '\0' }, \ + .more = 0, \ + .pos = 0, \ + .esc = 0 \ +} + +extern int slip_proto_read(int fd, void *buf, int len, + struct slip_proto *slip); +extern int slip_proto_write(int fd, void *buf, int len, + struct slip_proto *slip); + +#endif diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c index 0886eedba213..9a6f5c85f902 100644 --- a/arch/um/drivers/slip_kern.c +++ b/arch/um/drivers/slip_kern.c @@ -26,16 +26,16 @@ void slip_init(struct net_device *dev, void *data) .addr = NULL, .gate_addr = init->gate_addr, .slave = -1, - .ibuf = { '\0' }, - .obuf = { '\0' }, - .pos = 0, - .esc = 0, + .slip = SLIP_PROTO_INIT, .dev = dev }); dev->init = NULL; + dev->header_cache_update = NULL; + dev->hard_header_cache = NULL; + dev->hard_header = NULL; dev->hard_header_len = 0; - dev->addr_len = 4; - dev->type = ARPHRD_ETHER; + dev->addr_len = 0; + dev->type = ARPHRD_SLIP; dev->tx_queue_len = 256; dev->flags = IFF_NOARP; printk("SLIP backend - SLIP IP = %s\n", spri->gate_addr); diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c index d94846b1b4cf..71af444e591f 100644 --- a/arch/um/drivers/slip_user.c +++ b/arch/um/drivers/slip_user.c @@ -13,7 +13,7 @@ #include "user.h" #include "net_user.h" #include "slip.h" -#include "slip_proto.h" +#include "slip_common.h" #include "helper.h" #include "os.h" @@ -77,41 +77,51 @@ static int slip_tramp(char **argv, int fd) err = os_pipe(fds, 1, 0); if(err < 0){ printk("slip_tramp : pipe failed, err = %d\n", -err); - return(err); + goto out; } err = 0; pe_data.stdin = fd; pe_data.stdout = fds[1]; pe_data.close_me = fds[0]; - pid = run_helper(slip_pre_exec, &pe_data, argv, NULL); + err = run_helper(slip_pre_exec, &pe_data, argv, NULL); + if(err < 0) + goto out_close; + pid = err; - if(pid < 0) err = pid; - else { - output_len = page_size(); - output = um_kmalloc(output_len); - if(output == NULL) - printk("slip_tramp : failed to allocate output " - "buffer\n"); - - os_close_file(fds[1]); - read_output(fds[0], output, output_len); - if(output != NULL){ - printk("%s", output); - kfree(output); - } - CATCH_EINTR(err = waitpid(pid, &status, 0)); - if(err < 0) - err = errno; - else if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)){ - printk("'%s' didn't exit with status 0\n", argv[0]); - err = -EINVAL; - } + output_len = page_size(); + output = um_kmalloc(output_len); + if(output == NULL){ + printk("slip_tramp : failed to allocate output buffer\n"); + os_kill_process(pid, 1); + err = -ENOMEM; + goto out_free; } + os_close_file(fds[1]); + read_output(fds[0], output, output_len); + printk("%s", output); + + CATCH_EINTR(err = waitpid(pid, &status, 0)); + if(err < 0) + err = errno; + else if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)){ + printk("'%s' didn't exit with status 0\n", argv[0]); + err = -EINVAL; + } + else err = 0; + os_close_file(fds[0]); - return(err); +out_free: + kfree(output); + return err; + +out_close: + os_close_file(fds[0]); + os_close_file(fds[1]); +out: + return err; } static int slip_open(void *data) @@ -123,21 +133,26 @@ static int slip_open(void *data) NULL }; int sfd, mfd, err; - mfd = get_pty(); - if(mfd < 0){ - printk("umn : Failed to open pty, err = %d\n", -mfd); - return(mfd); + err = get_pty(); + if(err < 0){ + printk("slip-open : Failed to open pty, err = %d\n", -err); + goto out; } - sfd = os_open_file(ptsname(mfd), of_rdwr(OPENFLAGS()), 0); - if(sfd < 0){ - printk("Couldn't open tty for slip line, err = %d\n", -sfd); - os_close_file(mfd); - return(sfd); + mfd = err; + + err = os_open_file(ptsname(mfd), of_rdwr(OPENFLAGS()), 0); + if(err < 0){ + printk("Couldn't open tty for slip line, err = %d\n", -err); + goto out_close; } - if(set_up_tty(sfd)) return(-1); + sfd = err; + + if(set_up_tty(sfd)) + goto out_close2; + pri->slave = sfd; - pri->pos = 0; - pri->esc = 0; + pri->slip.pos = 0; + pri->slip.esc = 0; if(pri->gate_addr != NULL){ sprintf(version_buf, "%d", UML_NET_VERSION); strcpy(gate_buf, pri->gate_addr); @@ -146,12 +161,12 @@ static int slip_open(void *data) if(err < 0){ printk("slip_tramp failed - err = %d\n", -err); - return(err); + goto out_close2; } err = os_get_ifname(pri->slave, pri->name); if(err < 0){ printk("get_ifname failed, err = %d\n", -err); - return(err); + goto out_close2; } iter_addresses(pri->dev, open_addr, pri->name); } @@ -160,10 +175,16 @@ static int slip_open(void *data) if(err < 0){ printk("Failed to set slip discipline encapsulation - " "err = %d\n", -err); - return(err); + goto out_close2; } } return(mfd); +out_close2: + os_close_file(sfd); +out_close: + os_close_file(mfd); +out: + return err; } static void slip_close(int fd, void *data) @@ -190,48 +211,12 @@ static void slip_close(int fd, void *data) int slip_user_read(int fd, void *buf, int len, struct slip_data *pri) { - int i, n, size, start; - - if(pri->more>0) { - i = 0; - while(i < pri->more) { - size = slip_unesc(pri->ibuf[i++], - pri->ibuf, &pri->pos, &pri->esc); - if(size){ - memcpy(buf, pri->ibuf, size); - memmove(pri->ibuf, &pri->ibuf[i], pri->more-i); - pri->more=pri->more-i; - return(size); - } - } - pri->more=0; - } - - n = net_read(fd, &pri->ibuf[pri->pos], sizeof(pri->ibuf) - pri->pos); - if(n <= 0) return(n); - - start = pri->pos; - for(i = 0; i < n; i++){ - size = slip_unesc(pri->ibuf[start + i], - pri->ibuf, &pri->pos, &pri->esc); - if(size){ - memcpy(buf, pri->ibuf, size); - memmove(pri->ibuf, &pri->ibuf[start+i+1], n-(i+1)); - pri->more=n-(i+1); - return(size); - } - } - return(0); + return slip_proto_read(fd, buf, len, &pri->slip); } int slip_user_write(int fd, void *buf, int len, struct slip_data *pri) { - int actual, n; - - actual = slip_esc(buf, pri->obuf, len); - n = net_write(fd, pri->obuf, actual); - if(n < 0) return(n); - else return(len); + return slip_proto_write(fd, buf, len, &pri->slip); } static int slip_set_mtu(int mtu, void *data) @@ -267,14 +252,3 @@ struct net_user_info slip_user_info = { .delete_address = slip_del_addr, .max_packet = BUF_SIZE }; - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/drivers/slirp.h b/arch/um/drivers/slirp.h index afa4e30284fd..6cf88ab580c9 100644 --- a/arch/um/drivers/slirp.h +++ b/arch/um/drivers/slirp.h @@ -1,10 +1,7 @@ #ifndef __UM_SLIRP_H #define __UM_SLIRP_H -#define BUF_SIZE 1500 - /* two bytes each for a (pathological) max packet of escaped chars + * - * terminating END char + initial END char */ -#define ENC_BUF_SIZE (2 * BUF_SIZE + 2) +#include "slip_common.h" #define SLIRP_MAX_ARGS 100 /* @@ -24,28 +21,13 @@ struct slirp_data { struct arg_list_dummy_wrapper argw; int pid; int slave; - unsigned char ibuf[ENC_BUF_SIZE]; - unsigned char obuf[ENC_BUF_SIZE]; - int more; /* more data: do not read fd until ibuf has been drained */ - int pos; - int esc; + struct slip_proto slip; }; extern struct net_user_info slirp_user_info; -extern int set_umn_addr(int fd, char *addr, char *ptp_addr); extern int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri); -extern int slirp_user_write(int fd, void *buf, int len, struct slirp_data *pri); +extern int slirp_user_write(int fd, void *buf, int len, + struct slirp_data *pri); #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c index c9d6b52a831d..9864d27afdbe 100644 --- a/arch/um/drivers/slirp_kern.c +++ b/arch/um/drivers/slirp_kern.c @@ -25,10 +25,7 @@ void slirp_init(struct net_device *dev, void *data) { .argw = init->argw, .pid = -1, .slave = -1, - .ibuf = { '\0' }, - .obuf = { '\0' }, - .pos = 0, - .esc = 0, + .slip = SLIP_PROTO_INIT, .dev = dev }); dev->init = NULL; diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c index c322515c71cc..8d91f663d82c 100644 --- a/arch/um/drivers/slirp_user.c +++ b/arch/um/drivers/slirp_user.c @@ -12,7 +12,7 @@ #include "user.h" #include "net_user.h" #include "slirp.h" -#include "slip_proto.h" +#include "slip_common.h" #include "helper.h" #include "os.h" @@ -48,47 +48,32 @@ static int slirp_tramp(char **argv, int fd) return(pid); } -/* XXX This is just a trivial wrapper around os_pipe */ -static int slirp_datachan(int *mfd, int *sfd) -{ - int fds[2], err; - - err = os_pipe(fds, 1, 1); - if(err < 0){ - printk("slirp_datachan: Failed to open pipe, err = %d\n", -err); - return(err); - } - - *mfd = fds[0]; - *sfd = fds[1]; - return(0); -} - static int slirp_open(void *data) { struct slirp_data *pri = data; - int sfd, mfd, pid, err; + int fds[2], pid, err; - err = slirp_datachan(&mfd, &sfd); + err = os_pipe(fds, 1, 1); if(err) return(err); - pid = slirp_tramp(pri->argw.argv, sfd); - - if(pid < 0){ - printk("slirp_tramp failed - errno = %d\n", -pid); - os_close_file(sfd); - os_close_file(mfd); - return(pid); + err = slirp_tramp(pri->argw.argv, fds[1]); + if(err < 0){ + printk("slirp_tramp failed - errno = %d\n", -err); + goto out; } + pid = err; - pri->slave = sfd; - pri->pos = 0; - pri->esc = 0; + pri->slave = fds[1]; + pri->slip.pos = 0; + pri->slip.esc = 0; + pri->pid = err; - pri->pid = pid; - - return(mfd); + return(fds[0]); +out: + os_close_file(fds[0]); + os_close_file(fds[1]); + return err; } static void slirp_close(int fd, void *data) @@ -129,48 +114,12 @@ static void slirp_close(int fd, void *data) int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri) { - int i, n, size, start; - - if(pri->more>0) { - i = 0; - while(i < pri->more) { - size = slip_unesc(pri->ibuf[i++], - pri->ibuf,&pri->pos,&pri->esc); - if(size){ - memcpy(buf, pri->ibuf, size); - memmove(pri->ibuf, &pri->ibuf[i], pri->more-i); - pri->more=pri->more-i; - return(size); - } - } - pri->more=0; - } - - n = net_read(fd, &pri->ibuf[pri->pos], sizeof(pri->ibuf) - pri->pos); - if(n <= 0) return(n); - - start = pri->pos; - for(i = 0; i < n; i++){ - size = slip_unesc(pri->ibuf[start + i], - pri->ibuf,&pri->pos,&pri->esc); - if(size){ - memcpy(buf, pri->ibuf, size); - memmove(pri->ibuf, &pri->ibuf[start+i+1], n-(i+1)); - pri->more=n-(i+1); - return(size); - } - } - return(0); + return slip_proto_read(fd, buf, len, &pri->slip); } int slirp_user_write(int fd, void *buf, int len, struct slirp_data *pri) { - int actual, n; - - actual = slip_esc(buf, pri->obuf, len); - n = net_write(fd, pri->obuf, actual); - if(n < 0) return(n); - else return(len); + return slip_proto_write(fd, buf, len, &pri->slip); } static int slirp_set_mtu(int mtu, void *data) @@ -188,14 +137,3 @@ struct net_user_info slirp_user_info = { .delete_address = NULL, .max_packet = BUF_SIZE }; - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ From f797f9cc5485b50c35c106b462e1bc432ec37f90 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Mon, 13 Jun 2005 15:52:27 -0700 Subject: [PATCH 136/160] [PATCH] Fix PCI BAR size interpretation on 64-bit arches On 64-bit machines, PCI_BASE_ADDRESS_MEM_MASK and other mask constants passed to pci_size() are 64-bit (for example ~0x0fUL). However, pci_size does comparisons between the u32 arguments and the mask, which will fail even though any result from pci_size is still just 32-bit. Changing the mask argument to u32 seems the obvious thing to do, since all arithmetic in the function is 32-bit and having a larger mask makes no sense. This triggered on a PPC64 system here where an adapter (VGA, as it happened) had a memory region base of 0xfe000000 and a sz of the same, matching the if (max == maxbase ...) test at the bottom of pci_size but failing the mask comparison. Quite a corner case which I guess explains why we haven't seen it until now. Signed-off-by: Olof Johansson Acked-by: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pci/probe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index b7ae87823c69..fd48b201eb53 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -125,7 +125,7 @@ static inline unsigned int pci_calc_resource_flags(unsigned int flags) /* * Find the extent of a PCI decode.. */ -static u32 pci_size(u32 base, u32 maxbase, unsigned long mask) +static u32 pci_size(u32 base, u32 maxbase, u32 mask) { u32 size = mask & maxbase; /* Find the significant bits */ if (!size) From 6df3cecbb95345981718b38d357c50bc3425420a Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 13 Jun 2005 15:52:32 -0700 Subject: [PATCH 137/160] [PATCH] cond_resched_lock() fix On one path, cond_resched_lock() fails to return true if it dropped the lock. We think this might be causing the crashes in JBD's log_do_checkpoint(). Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/sched.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 66b2ed784822..f12a0c8a7d98 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -3755,19 +3755,22 @@ EXPORT_SYMBOL(cond_resched); */ int cond_resched_lock(spinlock_t * lock) { + int ret = 0; + if (need_lockbreak(lock)) { spin_unlock(lock); cpu_relax(); + ret = 1; spin_lock(lock); } if (need_resched()) { _raw_spin_unlock(lock); preempt_enable_no_resched(); __cond_resched(); + ret = 1; spin_lock(lock); - return 1; } - return 0; + return ret; } EXPORT_SYMBOL(cond_resched_lock); From e2c16499515aa044676a14b97a1b8a35f879152a Mon Sep 17 00:00:00 2001 From: Jon Smirl Date: Mon, 13 Jun 2005 15:52:36 -0700 Subject: [PATCH 138/160] [PATCH] Typo in fbdev sysfs support, virtual_size It prints out x,x instead of x,y. Signed-off-by: Jon Smirl Cc: "Antonino A. Daplas" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/fbsysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c index c78a2c5961d3..277d733c6d00 100644 --- a/drivers/video/fbsysfs.c +++ b/drivers/video/fbsysfs.c @@ -241,7 +241,7 @@ static ssize_t show_virtual(struct class_device *class_device, char *buf) struct fb_info *fb_info = (struct fb_info *)class_get_devdata(class_device); return snprintf(buf, PAGE_SIZE, "%d,%d\n", fb_info->var.xres_virtual, - fb_info->var.xres_virtual); + fb_info->var.yres_virtual); } static ssize_t store_cmap(struct class_device *class_device, const char * buf, From 223230e78900e5f0be984f7697cb9bf172d71a35 Mon Sep 17 00:00:00 2001 From: Markus Lidel Date: Mon, 13 Jun 2005 22:58:00 -0700 Subject: [PATCH 139/160] [PATCH] i2o: Fix free of event memory in i2o_block_event() Fixed freeing of event memory in i2o_block_event() Signed-off-by: Markus Lidel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/message/i2o/i2o_block.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index 7b74c87b569e..4830b7759061 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -573,6 +573,7 @@ static int i2o_block_reply(struct i2o_controller *c, u32 m, static void i2o_block_event(struct i2o_event *evt) { osm_info("block-osm: event received\n"); + kfree(evt); }; /* From 92c6dc59b7c1ca514021502c7eef53b9f2c738fd Mon Sep 17 00:00:00 2001 From: Thomas Hood Date: Mon, 13 Jun 2005 22:58:04 -0700 Subject: [PATCH 140/160] [PATCH] apm.c: ignore_normal_resume is set a bit too late This patch causes the ignore_normal_resume flag to be set slightly earlier, before there is a chance that the apm driver will receive the normal resume event from the BIOS. (Addresses Debian bug #310865) Signed-off-by: Thomas Hood Acked-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/apm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index 45641a872550..0ff65abcd56c 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -1222,6 +1222,7 @@ static int suspend(int vetoable) save_processor_state(); err = set_system_power_state(APM_STATE_SUSPEND); + ignore_normal_resume = 1; restore_processor_state(); local_irq_disable(); @@ -1229,7 +1230,6 @@ static int suspend(int vetoable) spin_lock(&i8253_lock); reinit_timer(); set_time(); - ignore_normal_resume = 1; spin_unlock(&i8253_lock); write_sequnlock(&xtime_lock); From 9a47696970bc8233818d370011e2fddae5cfce9f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 13 Jun 2005 22:58:09 -0700 Subject: [PATCH 141/160] [PATCH] macmodes: needs a license Module needs a license to prevent kernel tainting. Signed-off-by: Randy Dunlap Acked-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/macmodes.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/video/macmodes.c b/drivers/video/macmodes.c index de5a0f383600..2fc71081f7e7 100644 --- a/drivers/video/macmodes.c +++ b/drivers/video/macmodes.c @@ -387,3 +387,4 @@ int __init mac_find_mode(struct fb_var_screeninfo *var, struct fb_info *info, } EXPORT_SYMBOL(mac_find_mode); +MODULE_LICENSE("GPL"); From efa93dbedd0e2eacf49ea6fff1fe4397d520cf61 Mon Sep 17 00:00:00 2001 From: Karsten Wiese Date: Tue, 14 Jun 2005 09:54:55 -0700 Subject: [PATCH 142/160] [PATCH] usbaudio: prevent oops & dead keyboard on usb unplugging while the device is being used Without this patch, some usb kobjects, which are parents to the usx2y's kobjects can be freed before the usx2y's. This led to an oops in get_kobj_path_length() and a dead keyboard, when the usx2y's kobjects were freed. The patch ensures the correct sequence. Tested ok on kernel 2.6.12-rc2. Present in ALSA cvs Signed-off-by: Karsten Wiese Signed-off-by: Greg Kroah-Hartman Signed-off-by: Chris Wright Signed-off-by: Linus Torvalds --- sound/usb/usbaudio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 84b0bbddbd22..aae66144d411 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -3289,7 +3289,7 @@ static void snd_usb_audio_disconnect(struct usb_device *dev, void *ptr) } usb_chip[chip->index] = NULL; up(®ister_mutex); - snd_card_free_in_thread(card); + snd_card_free(card); } else { up(®ister_mutex); } From dcf78d80a6c2de829ec08c8e663a3370e982d616 Mon Sep 17 00:00:00 2001 From: Karsten Wiese Date: Tue, 14 Jun 2005 09:56:20 -0700 Subject: [PATCH 143/160] [PATCH] usbusx2y: prevent oops & dead keyboard on usb unplugging while the device is being used Without this patch, some usb kobjects, which are parents to the usx2y's kobjects can be freed before the usx2y's. This led to an oops in get_kobj_path_length() and a dead keyboard, when the usx2y's kobjects were freed. The patch ensures the correct sequence. Tested ok on kernel 2.6.12-rc2. Present in ALSA cvs Signed-off-by: Karsten Wiese Signed-off-by: Greg Kroah-Hartman Signed-off-by: Chris Wright Signed-off-by: Linus Torvalds --- sound/usb/usx2y/usbusx2y.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c index b06a267e5dac..89ee8b732013 100644 --- a/sound/usb/usx2y/usbusx2y.c +++ b/sound/usb/usx2y/usbusx2y.c @@ -1,6 +1,11 @@ /* * usbusy2y.c - ALSA USB US-428 Driver * +2005-04-14 Karsten Wiese + Version 0.8.7.2: + Call snd_card_free() instead of snd_card_free_in_thread() to prevent oops with dead keyboard symptom. + Tested ok with kernel 2.6.12-rc2. + 2004-12-14 Karsten Wiese Version 0.8.7.1: snd_pcm_open for rawusb pcm-devices now returns -EBUSY if called without rawusb's hwdep device being open. @@ -143,7 +148,7 @@ MODULE_AUTHOR("Karsten Wiese "); -MODULE_DESCRIPTION("TASCAM "NAME_ALLCAPS" Version 0.8.7.1"); +MODULE_DESCRIPTION("TASCAM "NAME_ALLCAPS" Version 0.8.7.2"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{TASCAM(0x1604), "NAME_ALLCAPS"(0x8001)(0x8005)(0x8007) }}"); @@ -430,8 +435,6 @@ static void usX2Y_usb_disconnect(struct usb_device* device, void* ptr) if (ptr) { usX2Ydev_t* usX2Y = usX2Y((snd_card_t*)ptr); struct list_head* p; - if (usX2Y->chip_status == USX2Y_STAT_CHIP_HUP) // on 2.6.1 kernel snd_usbmidi_disconnect() - return; // calls us back. better leave :-) . usX2Y->chip.shutdown = 1; usX2Y->chip_status = USX2Y_STAT_CHIP_HUP; usX2Y_unlinkSeq(&usX2Y->AS04); @@ -443,7 +446,7 @@ static void usX2Y_usb_disconnect(struct usb_device* device, void* ptr) } if (usX2Y->us428ctls_sharedmem) wake_up(&usX2Y->us428ctls_wait_queue_head); - snd_card_free_in_thread((snd_card_t*)ptr); + snd_card_free((snd_card_t*)ptr); } } From 4845f3333765b732aa2d7ea6d72fd03cfec4fbf3 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 14 Jun 2005 22:19:24 +1000 Subject: [PATCH 144/160] [PATCH] ppc64: update example configs Here is a patch to update the example configs in arch/ppc64/configs. Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc64/configs/g5_defconfig | 76 ++++++++++++-------- arch/ppc64/configs/iSeries_defconfig | 62 +++++++++------- arch/ppc64/configs/maple_defconfig | 70 ++++++++++++------ arch/ppc64/configs/pSeries_defconfig | 102 +++++++++++++++++---------- 4 files changed, 196 insertions(+), 114 deletions(-) diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig index 0f90df0b3f9c..1eb33398648e 100644 --- a/arch/ppc64/configs/g5_defconfig +++ b/arch/ppc64/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11 -# Thu Mar 10 16:47:04 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 16:59:20 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -31,19 +32,20 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=17 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 @@ -87,6 +89,8 @@ CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -97,6 +101,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # CONFIG_HOTPLUG_CPU is not set # @@ -104,10 +109,6 @@ CONFIG_PCI_NAMES=y # # CONFIG_PCCARD is not set -# -# PC-card bridges -# - # # PCI Hotplug Support # @@ -293,7 +294,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -301,7 +301,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -310,6 +309,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -332,6 +332,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support @@ -394,7 +395,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -564,6 +564,8 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set CONFIG_TIGON3=m +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -630,18 +632,6 @@ CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - # # Input Device Drivers # @@ -659,6 +649,16 @@ CONFIG_INPUT_MOUSE=y # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -676,6 +676,7 @@ CONFIG_HW_CONSOLE=y # Non-8250 serial port support # # CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -698,9 +699,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set # # TPM devices @@ -730,12 +734,11 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_KEYWEST=y -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -772,6 +775,7 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -785,6 +789,7 @@ CONFIG_I2C_KEYWEST=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -817,6 +822,11 @@ CONFIG_I2C_KEYWEST=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -830,6 +840,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set CONFIG_FB_RIVA=y # CONFIG_FB_RIVA_I2C is not set # CONFIG_FB_RIVA_DEBUG is not set @@ -847,6 +858,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -880,6 +892,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -890,8 +904,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -917,7 +929,6 @@ CONFIG_USB_PRINTER=y # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_RW_DETECT=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y @@ -1004,8 +1015,10 @@ CONFIG_USB_MON=y # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m @@ -1034,6 +1047,7 @@ CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y CONFIG_USB_SERIAL_TI=m @@ -1270,11 +1284,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y -# CONFIG_PRINTK_TIME is not set +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig index a39e9d2e25da..f6a2b99afd63 100644 --- a/arch/ppc64/configs/iSeries_defconfig +++ b/arch/ppc64/configs/iSeries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:52 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:01:28 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,29 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -79,6 +85,8 @@ CONFIG_NR_CPUS=32 CONFIG_GENERIC_HARDIRQS=y CONFIG_MSCHUNKS=y CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -89,16 +97,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set -# -# PC-card bridges -# - # # PCI Hotplug Support # @@ -210,7 +215,6 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -219,7 +223,6 @@ CONFIG_SCSI_IBMVSCSI=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -228,6 +231,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -250,6 +254,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support @@ -280,7 +285,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -445,7 +449,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -471,6 +474,7 @@ CONFIG_E1000=m # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -538,14 +542,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - # # Input Device Drivers # @@ -555,6 +551,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -570,6 +572,7 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_SERIAL_CORE=m CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -592,9 +595,16 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -633,13 +643,9 @@ CONFIG_MAX_RAW_DEVS=256 # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -848,10 +854,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -881,6 +890,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig index cf527501915c..8051b0f47b6f 100644 --- a/arch/ppc64/configs/maple_defconfig +++ b/arch/ppc64/configs/maple_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:53 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:12:48 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,28 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_AUDIT is not set # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -84,6 +89,8 @@ CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -94,16 +101,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set -# -# PC-card bridges -# - # # PCI Hotplug Support # @@ -261,7 +265,6 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -376,6 +379,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -431,14 +436,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - # # Input Device Drivers # @@ -448,6 +445,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -469,7 +472,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -492,8 +495,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -518,8 +528,8 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -545,7 +555,9 @@ CONFIG_I2C_AMD8111=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -556,9 +568,11 @@ CONFIG_I2C_AMD8111=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -568,6 +582,7 @@ CONFIG_I2C_AMD8111=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -615,6 +630,8 @@ CONFIG_DUMMY_CONSOLE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -625,8 +642,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -635,6 +650,8 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -688,6 +705,7 @@ CONFIG_USB_HIDINPUT=y CONFIG_USB_PEGASUS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y # # USB port drivers @@ -699,8 +717,10 @@ CONFIG_USB_PEGASUS=y CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_CONSOLE is not set CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set @@ -729,6 +749,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set CONFIG_USB_SERIAL_TI=m # CONFIG_USB_SERIAL_CYBERJACK is not set @@ -750,6 +771,7 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -936,10 +958,13 @@ CONFIG_NLS_UTF8=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -971,6 +996,7 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig index 4fecf237d5c9..3eb5ef25d3a3 100644 --- a/arch/ppc64/configs/pSeries_defconfig +++ b/arch/ppc64/configs/pSeries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:54 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:13:47 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,29 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -89,9 +95,12 @@ CONFIG_SCHED_SMT=y CONFIG_EEH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=m CONFIG_SCANLOG=m CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -102,6 +111,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_HOTPLUG_CPU=y # @@ -109,10 +119,6 @@ CONFIG_HOTPLUG_CPU=y # # CONFIG_PCCARD is not set -# -# PC-card bridges -# - # # PCI Hotplug Support # @@ -147,11 +153,10 @@ CONFIG_FW_LOADER=y # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # @@ -293,7 +298,6 @@ CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -310,7 +314,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_IPR=y CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -319,6 +322,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -341,6 +345,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -371,7 +377,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -539,7 +544,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -565,6 +569,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -635,20 +641,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - # # Input Device Drivers # @@ -668,6 +660,18 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_UINPUT is not set +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -689,8 +693,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -718,9 +722,16 @@ CONFIG_HVCS=m # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=1024 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -745,8 +756,8 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -773,7 +784,9 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -784,9 +797,11 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -796,6 +811,7 @@ CONFIG_I2C_ALGOBIT=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -828,8 +844,13 @@ CONFIG_I2C_ALGOBIT=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -838,6 +859,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y @@ -858,6 +880,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -891,6 +914,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -901,8 +926,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -911,6 +934,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -926,12 +951,11 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set @@ -975,6 +999,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y # # USB port drivers @@ -1000,6 +1025,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -1208,10 +1234,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -1243,6 +1272,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m From 1016888fb69662936b32ab767c7419a3be9a69d3 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Tue, 14 Jun 2005 13:52:19 -0700 Subject: [PATCH 145/160] [PATCH] update ppc64 defconfig enable cpusets enable new lpfc and jsm drivers enable new dm-multipath leave new agp disabled disable rivafb, it does not handle the cards in G5 models (FX5200 as example) the new nvidiafb doesnt work on bigendian, yet Signed-off-by: Olaf Hering Acked-by: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/defconfig | 104 ++++++++++++++++++++++++++++--------------- 1 file changed, 67 insertions(+), 37 deletions(-) diff --git a/arch/ppc64/defconfig b/arch/ppc64/defconfig index 537b1cc82eab..2f31bf3046f9 100644 --- a/arch/ppc64/defconfig +++ b/arch/ppc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:51 2005 +# Linux kernel version: 2.6.12-rc5-git9 +# Sun Jun 5 09:26:47 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,28 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_AUDIT is not set CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -91,9 +96,12 @@ CONFIG_DISCONTIGMEM=y CONFIG_EEH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=m CONFIG_SCANLOG=m CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -104,6 +112,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set CONFIG_HOTPLUG_CPU=y # @@ -111,10 +120,6 @@ CONFIG_HOTPLUG_CPU=y # # CONFIG_PCCARD is not set -# -# PC-card bridges -# - # # PCI Hotplug Support # @@ -149,11 +154,10 @@ CONFIG_FW_LOADER=y # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # @@ -301,6 +305,7 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set # CONFIG_SCSI_SATA_SIS is not set @@ -310,7 +315,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -327,7 +331,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_IPR=y CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -336,6 +339,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set CONFIG_SCSI_DEBUG=m @@ -358,6 +362,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -405,6 +411,7 @@ CONFIG_IEEE1394_AMDTP=m # CONFIG_ADB=y CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y # CONFIG_PMAC_PBOOK is not set # CONFIG_PMAC_BACKLIGHT is not set # CONFIG_INPUT_ADBHID is not set @@ -420,7 +427,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -588,7 +594,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -614,6 +619,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -682,20 +689,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - # # Input Device Drivers # @@ -715,6 +708,18 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_UINPUT is not set +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -738,6 +743,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_ICOM=m +CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -766,9 +772,16 @@ CONFIG_HVCS=m # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -793,9 +806,9 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_KEYWEST=y -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -822,7 +835,9 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -833,9 +848,11 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -845,6 +862,7 @@ CONFIG_I2C_KEYWEST=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -877,6 +895,11 @@ CONFIG_I2C_KEYWEST=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -890,9 +913,8 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set -CONFIG_FB_RIVA=y -CONFIG_FB_RIVA_I2C=y -# CONFIG_FB_RIVA_DEBUG is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y @@ -913,6 +935,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -946,6 +969,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -956,8 +981,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -966,6 +989,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -981,12 +1006,11 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_RW_DETECT=y # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set @@ -1030,6 +1054,7 @@ CONFIG_USB_HIDDEV=y CONFIG_USB_PEGASUS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set # # USB port drivers @@ -1055,6 +1080,7 @@ CONFIG_USB_PEGASUS=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -1276,10 +1302,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -1311,6 +1340,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m From bcfff0b471a60df350338bcd727fc9b8a6aa54b2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 15 Jun 2005 20:51:14 -0700 Subject: [PATCH 146/160] [NETFILTER]: ipt_recent: last_pkts is an array of "unsigned long" not "u_int32_t" This fixes various crashes on 64-bit when using this module. Based upon a patch by Juergen Kreileder . Signed-off-by: David S. Miller ACKed-by: Patrick McHardy --- net/ipv4/netfilter/ipt_recent.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/net/ipv4/netfilter/ipt_recent.c b/net/ipv4/netfilter/ipt_recent.c index 25ab9fabdcba..2d44b07688af 100644 --- a/net/ipv4/netfilter/ipt_recent.c +++ b/net/ipv4/netfilter/ipt_recent.c @@ -223,7 +223,7 @@ static int ip_recent_ctrl(struct file *file, const char __user *input, unsigned curr_table->table[count].last_seen = 0; curr_table->table[count].addr = 0; curr_table->table[count].ttl = 0; - memset(curr_table->table[count].last_pkts,0,ip_pkt_list_tot*sizeof(u_int32_t)); + memset(curr_table->table[count].last_pkts,0,ip_pkt_list_tot*sizeof(unsigned long)); curr_table->table[count].oldest_pkt = 0; curr_table->table[count].time_pos = 0; curr_table->time_info[count].position = count; @@ -502,7 +502,7 @@ match(const struct sk_buff *skb, location = time_info[curr_table->time_pos].position; hash_table[r_list[location].hash_entry] = -1; hash_table[hash_result] = location; - memset(r_list[location].last_pkts,0,ip_pkt_list_tot*sizeof(u_int32_t)); + memset(r_list[location].last_pkts,0,ip_pkt_list_tot*sizeof(unsigned long)); r_list[location].time_pos = curr_table->time_pos; r_list[location].addr = addr; r_list[location].ttl = ttl; @@ -631,7 +631,7 @@ match(const struct sk_buff *skb, r_list[location].last_seen = 0; r_list[location].addr = 0; r_list[location].ttl = 0; - memset(r_list[location].last_pkts,0,ip_pkt_list_tot*sizeof(u_int32_t)); + memset(r_list[location].last_pkts,0,ip_pkt_list_tot*sizeof(unsigned long)); r_list[location].oldest_pkt = 0; ans = !info->invert; } @@ -734,10 +734,10 @@ checkentry(const char *tablename, memset(curr_table->table,0,sizeof(struct recent_ip_list)*ip_list_tot); #ifdef DEBUG if(debug) printk(KERN_INFO RECENT_NAME ": checkentry: Allocating %d for pkt_list.\n", - sizeof(u_int32_t)*ip_pkt_list_tot*ip_list_tot); + sizeof(unsigned long)*ip_pkt_list_tot*ip_list_tot); #endif - hold = vmalloc(sizeof(u_int32_t)*ip_pkt_list_tot*ip_list_tot); + hold = vmalloc(sizeof(unsigned long)*ip_pkt_list_tot*ip_list_tot); #ifdef DEBUG if(debug) printk(KERN_INFO RECENT_NAME ": checkentry: After pkt_list allocation.\n"); #endif From 9c56187d3c345cc0e7a2f162b8c32543175d7bf7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 16 Jun 2005 12:56:15 +0200 Subject: [PATCH 147/160] This patch kills elevator_global_init() in elevator.c which does nothing. Signed-off-by: Jens Axboe Signed-off-by: Tejun Heo --- drivers/block/elevator.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 6b79b4314622..98fcabbafe1e 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -220,11 +220,6 @@ void elevator_exit(elevator_t *e) kfree(e); } -static int elevator_global_init(void) -{ - return 0; -} - int elv_merge(request_queue_t *q, struct request **req, struct bio *bio) { elevator_t *e = q->elevator; @@ -692,8 +687,6 @@ ssize_t elv_iosched_show(request_queue_t *q, char *name) return len; } -module_init(elevator_global_init); - EXPORT_SYMBOL(elv_add_request); EXPORT_SYMBOL(__elv_add_request); EXPORT_SYMBOL(elv_requeue_request); From c374f127e4ff17a318b9ae95a5bf65f370c2d0b1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 16 Jun 2005 12:57:31 +0200 Subject: [PATCH 148/160] This patch fixes q->unplug_thresh condition check in __elv_add_request(). rq.count[READ] + rq.count[WRITE] can increase more than one if another thread has allocated a request after the current request is allocated or in_flight could have changed resulting in larger-than-one change of nrq, thus breaking the threshold mechanism. Signed-off-by: Jens Axboe Signed-off-by: Tejun Heo --- drivers/block/elevator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 98fcabbafe1e..89982925f9e2 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -317,7 +317,7 @@ void __elv_add_request(request_queue_t *q, struct request *rq, int where, int nrq = q->rq.count[READ] + q->rq.count[WRITE] - q->in_flight; - if (nrq == q->unplug_thresh) + if (nrq >= q->unplug_thresh) __generic_unplug_device(q); } } else From a2ef79e1840ebbd0b5907e53c755efd5662112a1 Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 15 Jun 2005 22:26:31 -0700 Subject: [PATCH 149/160] [PATCH] sbp2 slab corruption fix This fixed a problem that showed up in the Fedora development tree a few weeks before the Fedora Core 4 release, initially as slab corruption, later as hard crashes on boot up, when slab debugging was disabled for the release. More details on the history at https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=158424 The problem is caused by sbp2's use of scsi_host->hostdata[0] to hold a scsi_id, without explicitly requesting space for it. Since hostdata is declared as a zero-sized array, we don't get any such space by default, so it must be explicitly requested. The patch below implements just that. Signed-off-by: Alexandre Oliva Cc: Jody McIntyre Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/ieee1394/sbp2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index 00c7b958361a..ab82d6addd7f 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -745,7 +745,8 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud list_add_tail(&scsi_id->scsi_list, &hi->scsi_ids); /* Register our host with the SCSI stack. */ - scsi_host = scsi_host_alloc(&scsi_driver_template, 0); + scsi_host = scsi_host_alloc(&scsi_driver_template, + sizeof (unsigned long)); if (!scsi_host) { SBP2_ERR("failed to register scsi host"); goto failed_alloc; From 5db92850d3ab72b830a0fe6e30eaec8462801408 Mon Sep 17 00:00:00 2001 From: Daniel Jacobowitz Date: Wed, 15 Jun 2005 22:26:34 -0700 Subject: [PATCH 150/160] [PATCH] Fix large core dumps with a 32-bit off_t The ELF core dump code has one use of off_t when writing out segments. Some of the segments may be passed the 2GB limit of an off_t, even on a 32-bit system, so it's important to use loff_t instead. This fixes a corrupted core dump in the bigcore test in GDB's testsuite. Signed-off-by: Daniel Jacobowitz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/binfmt_elf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index c374be51b041..f8f6b6b76179 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -1125,7 +1125,7 @@ static int dump_write(struct file *file, const void *addr, int nr) return file->f_op->write(file, addr, nr, &file->f_pos) == nr; } -static int dump_seek(struct file *file, off_t off) +static int dump_seek(struct file *file, loff_t off) { if (file->f_op->llseek) { if (file->f_op->llseek(file, off, 0) != off) From e41fb09b2fa15db095d3ee981299f488d7b48dfe Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 15 Jun 2005 22:26:36 -0700 Subject: [PATCH 151/160] [PATCH] ALPS: fix enabling hardware tapping It looks like logic for enabling hardware tapping in ALPS driver was inverted and we enable it only if it was already enabled by BIOS or firmware. I have a confirmation from one user that the patch below fixes the problem for him and it might be beneficial if we could get it into 2.6.12. Signed-off-by: Dmitry Torokhov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/input/mouse/alps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 42a9f7f6f8cb..7bf4be733e9a 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -352,7 +352,7 @@ static int alps_reconnect(struct psmouse *psmouse) if (alps_get_status(psmouse, param)) return -1; - if (param[0] & 0x04) + if (!(param[0] & 0x04)) alps_tap_mode(psmouse, 1); if (alps_absolute_mode(psmouse)) { From 58125f95c62a44f12bb71c58ef70f0068d20c7a2 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 15 Jun 2005 22:26:38 -0700 Subject: [PATCH 152/160] [PATCH] fix for kaweth broken by changes in the networking layer Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/usb/net/kaweth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c index a9a7cf4a38eb..fd6ff4cb2c62 100644 --- a/drivers/usb/net/kaweth.c +++ b/drivers/usb/net/kaweth.c @@ -520,7 +520,7 @@ static void int_callback(struct urb *u, struct pt_regs *regs) /* we check the link state to report changes */ if (kaweth->linkstate != (act_state = ( kaweth->intbuffer[STATE_OFFSET] | STATE_MASK) >> STATE_SHIFT)) { - if (!act_state) + if (act_state) netif_carrier_on(kaweth->net); else netif_carrier_off(kaweth->net); From 90ef713b6368dcfe7a74bcc0026b998b4c44d5bc Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 16 Jun 2005 18:01:11 +0100 Subject: [PATCH 153/160] [PATCH] ARM: 2712/1: Fix the RGB order for the Versatile CLCD Patch from Catalin Marinas The current red and blue colours on the Versatile CLCD are reversed when the 5:6:5 mode is used. The patch sets the proper bit in the SYS_CLCD register value. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-versatile/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 554e1bd30d6e..302c2a7b9b63 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -543,7 +543,7 @@ static void versatile_clcd_enable(struct clcd_fb *fb) val |= SYS_CLCD_MODE_5551; break; case 6: - val |= SYS_CLCD_MODE_565_BLSB; + val |= SYS_CLCD_MODE_565_RLSB; break; case 8: val |= SYS_CLCD_MODE_888; From fea7722fd7b45c6957caed84251d95269319fe16 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 16 Jun 2005 18:01:11 +0100 Subject: [PATCH 154/160] [PATCH] ARM: 2713/1: Fix the GPIO base for Integrator/CP Patch from Catalin Marinas The GPIO base for Integrator/CP is different from the Integrator/AP. This patch sets the correct value for INTEGRATOR_GPIO_BASE. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-integrator/integrator_cp.c | 1 - include/asm-arm/arch-integrator/platform.h | 4 ++++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 3b948e8c2751..e0a01eef0993 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -83,7 +83,6 @@ static struct map_desc intcp_io_desc[] __initdata = { { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K, MT_DEVICE }, { IO_ADDRESS(INTEGRATOR_DBG_BASE), INTEGRATOR_DBG_BASE, SZ_4K, MT_DEVICE }, { IO_ADDRESS(INTEGRATOR_GPIO_BASE), INTEGRATOR_GPIO_BASE, SZ_4K, MT_DEVICE }, - { 0xfc900000, 0xc9000000, SZ_4K, MT_DEVICE }, { 0xfca00000, 0xca000000, SZ_4K, MT_DEVICE }, { 0xfcb00000, 0xcb000000, SZ_4K, MT_DEVICE }, }; diff --git a/include/asm-arm/arch-integrator/platform.h b/include/asm-arm/arch-integrator/platform.h index bd364f5a99bc..96ad3d2a66d1 100644 --- a/include/asm-arm/arch-integrator/platform.h +++ b/include/asm-arm/arch-integrator/platform.h @@ -293,7 +293,11 @@ #define INTEGRATOR_DBG_SWITCH (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET) +#if defined(CONFIG_ARCH_INTEGRATOR_AP) #define INTEGRATOR_GPIO_BASE 0x1B000000 /* GPIO */ +#elif defined(CONFIG_ARCH_INTEGRATOR_CP) +#define INTEGRATOR_GPIO_BASE 0xC9000000 /* GPIO */ +#endif /* ------------------------------------------------------------------------ * KMI keyboard/mouse definitions From 95220a2ea334b5ff2168cc9bf31c0e08b29bae21 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 16 Jun 2005 18:01:12 +0100 Subject: [PATCH 155/160] [PATCH] ARM: 2714/1: Fix the IB2 definitions for the Versatile platform Patch from Catalin Marinas The initial IB2 addresses did not depend on the IB2 base. This patch defines them as (VERSATILE_IB2_BASE + offset). Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- include/asm-arm/arch-versatile/platform.h | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/include/asm-arm/arch-versatile/platform.h b/include/asm-arm/arch-versatile/platform.h index 2598d1f08548..a71093e44c58 100644 --- a/include/asm-arm/arch-versatile/platform.h +++ b/include/asm-arm/arch-versatile/platform.h @@ -498,11 +498,17 @@ /* * IB2 Versatile/AB expansion board definitions */ -#define VERSATILE_IB2_CAMERA_BANK 0x24000000 -#define VERSATILE_IB2_KBD_DATAREG 0x25000000 -#define VERSATILE_IB2_IER 0x26000000 /* for VICINTSOURCE27 */ -#define VERSATILE_IB2_CTRL 0x27000000 -#define VERSATILE_IB2_STAT 0x27000004 +#define VERSATILE_IB2_CAMERA_BANK VERSATILE_IB2_BASE +#define VERSATILE_IB2_KBD_DATAREG (VERSATILE_IB2_BASE + 0x01000000) + +/* VICINTSOURCE27 */ +#define VERSATILE_IB2_INT_BASE (VERSATILE_IB2_BASE + 0x02000000) +#define VERSATILE_IB2_IER (VERSATILE_IB2_INT_BASE + 0) +#define VERSATILE_IB2_ISR (VERSATILE_IB2_INT_BASE + 4) + +#define VERSATILE_IB2_CTL_BASE (VERSATILE_IB2_BASE + 0x03000000) +#define VERSATILE_IB2_CTRL (VERSATILE_IB2_CTL_BASE + 0) +#define VERSATILE_IB2_STAT (VERSATILE_IB2_CTL_BASE + 4) #endif #endif From 22f11c4e662ef0bdd87f09370a76c83ed738d5fd Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 16 Jun 2005 21:23:56 +0100 Subject: [PATCH 156/160] [PATCH] ARM: 2715/1: restore CPLD interrupts upon resume for Lubbock and Mainstone Patch from Nicolas Pitre Without this some devices fail to work again after a suspend event. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mach-pxa/lubbock.c | 30 ++++++++++++++++++++++++++++++ arch/arm/mach-pxa/mainstone.c | 31 ++++++++++++++++++++++++++++++- 2 files changed, 60 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index dd012d6e2f5c..f2c9e0d2b24b 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -106,6 +107,35 @@ static void __init lubbock_init_irq(void) set_irq_type(IRQ_GPIO(0), IRQT_FALLING); } +#ifdef CONFIG_PM + +static int lubbock_irq_resume(struct sys_device *dev) +{ + LUB_IRQ_MASK_EN = lubbock_irq_enabled; + return 0; +} + +static struct sysdev_class lubbock_irq_sysclass = { + set_kset_name("cpld_irq"), + .resume = lubbock_irq_resume, +}; + +static struct sys_device lubbock_irq_device = { + .cls = &lubbock_irq_sysclass, +}; + +static int __init lubbock_irq_device_init(void) +{ + int ret = sysdev_class_register(&lubbock_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&lubbock_irq_device); + return ret; +} + +device_initcall(lubbock_irq_device_init); + +#endif + static int lubbock_udc_is_connected(void) { return (LUB_MISC_RD & (1 << 9)) == 0; diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 6823ae28ae6a..9896afca751f 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -15,6 +15,7 @@ #include #include +#include #include #include #include @@ -62,7 +63,6 @@ static struct irqchip mainstone_irq_chip = { .unmask = mainstone_unmask_irq, }; - static void mainstone_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) { @@ -100,6 +100,35 @@ static void __init mainstone_init_irq(void) set_irq_type(IRQ_GPIO(0), IRQT_FALLING); } +#ifdef CONFIG_PM + +static int mainstone_irq_resume(struct sys_device *dev) +{ + MST_INTMSKENA = mainstone_irq_enabled; + return 0; +} + +static struct sysdev_class mainstone_irq_sysclass = { + set_kset_name("cpld_irq"), + .resume = mainstone_irq_resume, +}; + +static struct sys_device mainstone_irq_device = { + .cls = &mainstone_irq_sysclass, +}; + +static int __init mainstone_irq_device_init(void) +{ + int ret = sysdev_class_register(&mainstone_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&mainstone_irq_device); + return ret; +} + +device_initcall(mainstone_irq_device_init); + +#endif + static struct resource smc91x_resources[] = { [0] = { From db3b5848ea6440968fcdd29b80514d0de044bb7c Mon Sep 17 00:00:00 2001 From: Kiyoshi Ueda Date: Fri, 17 Jun 2005 16:15:10 +0200 Subject: [PATCH 157/160] When cfq I/O scheduler is selected, get_request() in __make_request() calls __cfq_get_queue(). __cfq_get_queue() finds an existing queue (struct cfq_queue) of the current process for the device and returns it. If it's not found, __cfq_get_queue() creates and returns a new one if __cfq_get_queue() is called with __GFP_WAIT flag, or __cfq_get_queue() returns NULL (this means that get_request() fails) if no __GFP_WAIT flag. On the other hand, in __make_request(), get_request() is called without __GFP_WAIT flag at the first time. Thus, the get_request() fails when there is no existing queue, typically when it's called for the first I/O request of the process to the device. Though it will be followed by get_request_wait() for general case, __make_request() will just end the I/O with an error (EWOULDBLOCK) when the request was for read-ahead. Signed-off-by: Jens Axboe Signed-off-by: Kiyoshi Ueda Signed-off-by: Jun'ichi Nomura --- drivers/block/cfq-iosched.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/block/cfq-iosched.c b/drivers/block/cfq-iosched.c index 0ef7a0065ece..2210bacad56a 100644 --- a/drivers/block/cfq-iosched.c +++ b/drivers/block/cfq-iosched.c @@ -1202,13 +1202,16 @@ retry: if (new_cfqq) { cfqq = new_cfqq; new_cfqq = NULL; - } else if (gfp_mask & __GFP_WAIT) { + } else { spin_unlock_irq(cfqd->queue->queue_lock); new_cfqq = kmem_cache_alloc(cfq_pool, gfp_mask); spin_lock_irq(cfqd->queue->queue_lock); + + if (!new_cfqq && !(gfp_mask & __GFP_WAIT)) + goto out; + goto retry; - } else - goto out; + } memset(cfqq, 0, sizeof(*cfqq)); From caf2857ac6e0ba2651e722f05d5f7d3ec8ef2615 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 17 Jun 2005 11:36:36 +0200 Subject: [PATCH 158/160] [PATCH] timer exit cleanup Do all timer zapping in exit_itimers. Signed-off-by: Ingo Molnar Signed-off-by: Linus Torvalds --- kernel/exit.c | 4 +--- kernel/posix-timers.c | 1 + 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/kernel/exit.c b/kernel/exit.c index edaa50b5bbfa..2ef2ad540201 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -811,10 +811,8 @@ fastcall NORET_TYPE void do_exit(long code) acct_update_integrals(tsk); update_mem_hiwater(tsk); group_dead = atomic_dec_and_test(&tsk->signal->live); - if (group_dead) { - del_timer_sync(&tsk->signal->real_timer); + if (group_dead) acct_process(code); - } exit_mm(tsk); exit_sem(tsk); diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c index fd316c272260..cabb63fc9e16 100644 --- a/kernel/posix-timers.c +++ b/kernel/posix-timers.c @@ -1197,6 +1197,7 @@ void exit_itimers(struct signal_struct *sig) tmr = list_entry(sig->posix_timers.next, struct k_itimer, list); itimer_delete(tmr); } + del_timer_sync(&sig->real_timer); } /* From 794f5bfa77955c4455f6d72d8b0e2bee25f1ff0c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 17 Jun 2005 12:25:25 -0700 Subject: [PATCH 159/160] [PATCH] PCI: don't override drv->shutdown unconditionally There are many drivers that have been setting the generic driver model level shutdown callback, and pci thus must not override it. Without this patch we can have really bad data loss on various raid controllers. Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/pci/pci-driver.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index fe98553c978f..f315df2005bc 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -393,7 +393,10 @@ int pci_register_driver(struct pci_driver *drv) drv->driver.bus = &pci_bus_type; drv->driver.probe = pci_device_probe; drv->driver.remove = pci_device_remove; - drv->driver.shutdown = pci_device_shutdown, + /* FIXME, once all of the existing PCI drivers have been fixed to set + * the pci shutdown function, this test can go away. */ + if (!drv->driver.shutdown) + drv->driver.shutdown = pci_device_shutdown, drv->driver.owner = drv->owner; drv->driver.kobj.ktype = &pci_driver_kobj_type; pci_init_dynids(&drv->dynids); From 9ee1c939d1cb936b1f98e8d81aeffab57bae46ab Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 17 Jun 2005 12:48:29 -0700 Subject: [PATCH 160/160] Linux 2.6.12 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 9e005e18c71c..0d1e74d50067 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 12 -EXTRAVERSION =-rc6 +EXTRAVERSION = NAME=Woozy Numbat # *DOCUMENTATION*