renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 06:34:11 +08:00
Code

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next

Browse Source
This commit is contained in:
David S. Miller 2011-11-16 18:31:56 -05:00
commit f85fa27913
12 changed files with 347 additions and 306 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
drivers/net/ethernet/intel/e1000/e1000_hw.h
View File

@ -448,7 +448,6 @@ void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value);
#define E1000_DEV_ID_INTEL_CE4100_GBE 0x2E6E
#define NODE_ADDRESS_SIZE 6
#define ETH_LENGTH_OF_ADDRESS 6
/* MAC decode size is 128K - This is the size of BAR0 */
#define MAC_DECODE_SIZE (128 * 1024)

402
drivers/net/ethernet/intel/e1000e/netdev.c
View File

@ -163,16 +163,13 @@ static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo)
regs[n] = __er32(hw, E1000_TARC(n));
break;
default:
printk(KERN_INFO "%-15s %08x\n",
reginfo->name, __er32(hw, reginfo->ofs));
pr_info("%-15s %08x\n",
reginfo->name, __er32(hw, reginfo->ofs));
return;
}
snprintf(rname, 16, "%s%s", reginfo->name, "[0-1]");
printk(KERN_INFO "%-15s ", rname);
for (n = 0; n < 2; n++)
printk(KERN_CONT "%08x ", regs[n]);
printk(KERN_CONT "\n");
pr_info("%-15s %08x %08x\n", rname, regs[0], regs[1]);
}
/*
@ -208,16 +205,15 @@ static void e1000e_dump(struct e1000_adapter *adapter)
/* Print netdevice Info */
if (netdev) {
dev_info(&adapter->pdev->dev, "Net device Info\n");
printk(KERN_INFO "Device Name state "
"trans_start last_rx\n");
printk(KERN_INFO "%-15s %016lX %016lX %016lX\n",
netdev->name, netdev->state, netdev->trans_start,
netdev->last_rx);
pr_info("Device Name state trans_start last_rx\n");
pr_info("%-15s %016lX %016lX %016lX\n",
netdev->name, netdev->state, netdev->trans_start,
netdev->last_rx);
}
/* Print Registers */
dev_info(&adapter->pdev->dev, "Register Dump\n");
printk(KERN_INFO " Register Name Value\n");
pr_info(" Register Name Value\n");
for (reginfo = (struct e1000_reg_info *)e1000_reg_info_tbl;
reginfo->name; reginfo++) {
e1000_regdump(hw, reginfo);
@ -228,15 +224,14 @@ static void e1000e_dump(struct e1000_adapter *adapter)
goto exit;
dev_info(&adapter->pdev->dev, "Tx Ring Summary\n");
printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma ]"
" leng ntw timestamp\n");
pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n");
buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean];
printk(KERN_INFO " %5d %5X %5X %016llX %04X %3X %016llX\n",
0, tx_ring->next_to_use, tx_ring->next_to_clean,
(unsigned long long)buffer_info->dma,
buffer_info->length,
buffer_info->next_to_watch,
(unsigned long long)buffer_info->time_stamp);
pr_info(" %5d %5X %5X %016llX %04X %3X %016llX\n",
0, tx_ring->next_to_use, tx_ring->next_to_clean,
(unsigned long long)buffer_info->dma,
buffer_info->length,
buffer_info->next_to_watch,
(unsigned long long)buffer_info->time_stamp);
/* Print Tx Ring */
if (!netif_msg_tx_done(adapter))
@ -271,37 +266,32 @@ static void e1000e_dump(struct e1000_adapter *adapter)
* +----------------------------------------------------------------+
* 63 48 47 40 39 36 35 32 31 24 23 20 19 0
*/
printk(KERN_INFO "Tl[desc] [address 63:0 ] [SpeCssSCmCsLen]"
" [bi->dma ] leng ntw timestamp bi->skb "
"<-- Legacy format\n");
printk(KERN_INFO "Tc[desc] [Ce CoCsIpceCoS] [MssHlRSCm0Plen]"
" [bi->dma ] leng ntw timestamp bi->skb "
"<-- Ext Context format\n");
printk(KERN_INFO "Td[desc] [address 63:0 ] [VlaPoRSCm1Dlen]"
" [bi->dma ] leng ntw timestamp bi->skb "
"<-- Ext Data format\n");
pr_info("Tl[desc] [address 63:0 ] [SpeCssSCmCsLen] [bi->dma ] leng ntw timestamp bi->skb <-- Legacy format\n");
pr_info("Tc[desc] [Ce CoCsIpceCoS] [MssHlRSCm0Plen] [bi->dma ] leng ntw timestamp bi->skb <-- Ext Context format\n");
pr_info("Td[desc] [address 63:0 ] [VlaPoRSCm1Dlen] [bi->dma ] leng ntw timestamp bi->skb <-- Ext Data format\n");
for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
const char *next_desc;
tx_desc = E1000_TX_DESC(*tx_ring, i);
buffer_info = &tx_ring->buffer_info[i];
u0 = (struct my_u0 *)tx_desc;
printk(KERN_INFO "T%c[0x%03X] %016llX %016llX %016llX "
"%04X %3X %016llX %p",
(!(le64_to_cpu(u0->b) & (1 << 29)) ? 'l' :
((le64_to_cpu(u0->b) & (1 << 20)) ? 'd' : 'c')), i,
(unsigned long long)le64_to_cpu(u0->a),
(unsigned long long)le64_to_cpu(u0->b),
(unsigned long long)buffer_info->dma,
buffer_info->length, buffer_info->next_to_watch,
(unsigned long long)buffer_info->time_stamp,
buffer_info->skb);
if (i == tx_ring->next_to_use && i == tx_ring->next_to_clean)
printk(KERN_CONT " NTC/U\n");
next_desc = " NTC/U";
else if (i == tx_ring->next_to_use)
printk(KERN_CONT " NTU\n");
next_desc = " NTU";
else if (i == tx_ring->next_to_clean)
printk(KERN_CONT " NTC\n");
next_desc = " NTC";
else
printk(KERN_CONT "\n");
next_desc = "";
pr_info("T%c[0x%03X] %016llX %016llX %016llX %04X %3X %016llX %p%s\n",
(!(le64_to_cpu(u0->b) & (1 << 29)) ? 'l' :
((le64_to_cpu(u0->b) & (1 << 20)) ? 'd' : 'c')),
i,
(unsigned long long)le64_to_cpu(u0->a),
(unsigned long long)le64_to_cpu(u0->b),
(unsigned long long)buffer_info->dma,
buffer_info->length, buffer_info->next_to_watch,
(unsigned long long)buffer_info->time_stamp,
buffer_info->skb, next_desc);
if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
@ -312,9 +302,9 @@ static void e1000e_dump(struct e1000_adapter *adapter)
/* Print Rx Ring Summary */
rx_ring_summary:
dev_info(&adapter->pdev->dev, "Rx Ring Summary\n");
printk(KERN_INFO "Queue [NTU] [NTC]\n");
printk(KERN_INFO " %5d %5X %5X\n", 0,
rx_ring->next_to_use, rx_ring->next_to_clean);
pr_info("Queue [NTU] [NTC]\n");
pr_info(" %5d %5X %5X\n",
0, rx_ring->next_to_use, rx_ring->next_to_clean);
/* Print Rx Ring */
if (!netif_msg_rx_status(adapter))
@ -337,10 +327,7 @@ rx_ring_summary:
* 24 | Buffer Address 3 [63:0] |
* +-----------------------------------------------------+
*/
printk(KERN_INFO "R [desc] [buffer 0 63:0 ] "
"[buffer 1 63:0 ] "
"[buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma ] "
"[bi->skb] <-- Ext Pkt Split format\n");
pr_info("R [desc] [buffer 0 63:0 ] [buffer 1 63:0 ] [buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma ] [bi->skb] <-- Ext Pkt Split format\n");
/* [Extended] Receive Descriptor (Write-Back) Format
*
* 63 48 47 32 31 13 12 8 7 4 3 0
@ -352,35 +339,40 @@ rx_ring_summary:
* +------------------------------------------------------+
* 63 48 47 32 31 20 19 0
*/
printk(KERN_INFO "RWB[desc] [ck ipid mrqhsh] "
"[vl l0 ee es] "
"[ l3 l2 l1 hs] [reserved ] ---------------- "
"[bi->skb] <-- Ext Rx Write-Back format\n");
pr_info("RWB[desc] [ck ipid mrqhsh] [vl l0 ee es] [ l3 l2 l1 hs] [reserved ] ---------------- [bi->skb] <-- Ext Rx Write-Back format\n");
for (i = 0; i < rx_ring->count; i++) {
const char *next_desc;
buffer_info = &rx_ring->buffer_info[i];
rx_desc_ps = E1000_RX_DESC_PS(*rx_ring, i);
u1 = (struct my_u1 *)rx_desc_ps;
staterr =
le32_to_cpu(rx_desc_ps->wb.middle.status_error);
if (i == rx_ring->next_to_use)
next_desc = " NTU";
else if (i == rx_ring->next_to_clean)
next_desc = " NTC";
else
next_desc = "";
if (staterr & E1000_RXD_STAT_DD) {
/* Descriptor Done */
printk(KERN_INFO "RWB[0x%03X] %016llX "
"%016llX %016llX %016llX "
"---------------- %p", i,
(unsigned long long)le64_to_cpu(u1->a),
(unsigned long long)le64_to_cpu(u1->b),
(unsigned long long)le64_to_cpu(u1->c),
(unsigned long long)le64_to_cpu(u1->d),
buffer_info->skb);
pr_info("%s[0x%03X] %016llX %016llX %016llX %016llX ---------------- %p%s\n",
"RWB", i,
(unsigned long long)le64_to_cpu(u1->a),
(unsigned long long)le64_to_cpu(u1->b),
(unsigned long long)le64_to_cpu(u1->c),
(unsigned long long)le64_to_cpu(u1->d),
buffer_info->skb, next_desc);
} else {
printk(KERN_INFO "R [0x%03X] %016llX "
"%016llX %016llX %016llX %016llX %p", i,
(unsigned long long)le64_to_cpu(u1->a),
(unsigned long long)le64_to_cpu(u1->b),
(unsigned long long)le64_to_cpu(u1->c),
(unsigned long long)le64_to_cpu(u1->d),
(unsigned long long)buffer_info->dma,
buffer_info->skb);
pr_info("%s[0x%03X] %016llX %016llX %016llX %016llX %016llX %p%s\n",
"R ", i,
(unsigned long long)le64_to_cpu(u1->a),
(unsigned long long)le64_to_cpu(u1->b),
(unsigned long long)le64_to_cpu(u1->c),
(unsigned long long)le64_to_cpu(u1->d),
(unsigned long long)buffer_info->dma,
buffer_info->skb, next_desc);
if (netif_msg_pktdata(adapter))
print_hex_dump(KERN_INFO, "",
@ -388,13 +380,6 @@ rx_ring_summary:
phys_to_virt(buffer_info->dma),
adapter->rx_ps_bsize0, true);
}
if (i == rx_ring->next_to_use)
printk(KERN_CONT " NTU\n");
else if (i == rx_ring->next_to_clean)
printk(KERN_CONT " NTC\n");
else
printk(KERN_CONT "\n");
}
break;
default:
@ -407,9 +392,7 @@ rx_ring_summary:
* 8 | Reserved |
* +-----------------------------------------------------+
*/
printk(KERN_INFO "R [desc] [buf addr 63:0 ] "
"[reserved 63:0 ] [bi->dma ] "
"[bi->skb] <-- Ext (Read) format\n");
pr_info("R [desc] [buf addr 63:0 ] [reserved 63:0 ] [bi->dma ] [bi->skb] <-- Ext (Read) format\n");
/* Extended Receive Descriptor (Write-Back) Format
*
* 63 48 47 32 31 24 23 4 3 0
@ -423,29 +406,37 @@ rx_ring_summary:
* +------------------------------------------------------+
* 63 48 47 32 31 20 19 0
*/
printk(KERN_INFO "RWB[desc] [cs ipid mrq] "
"[vt ln xe xs] "
"[bi->skb] <-- Ext (Write-Back) format\n");
pr_info("RWB[desc] [cs ipid mrq] [vt ln xe xs] [bi->skb] <-- Ext (Write-Back) format\n");
for (i = 0; i < rx_ring->count; i++) {
const char *next_desc;
buffer_info = &rx_ring->buffer_info[i];
rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
u1 = (struct my_u1 *)rx_desc;
staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
if (i == rx_ring->next_to_use)
next_desc = " NTU";
else if (i == rx_ring->next_to_clean)
next_desc = " NTC";
else
next_desc = "";
if (staterr & E1000_RXD_STAT_DD) {
/* Descriptor Done */
printk(KERN_INFO "RWB[0x%03X] %016llX "
"%016llX ---------------- %p", i,
(unsigned long long)le64_to_cpu(u1->a),
(unsigned long long)le64_to_cpu(u1->b),
buffer_info->skb);
pr_info("%s[0x%03X] %016llX %016llX ---------------- %p%s\n",
"RWB", i,
(unsigned long long)le64_to_cpu(u1->a),
(unsigned long long)le64_to_cpu(u1->b),
buffer_info->skb, next_desc);
} else {
printk(KERN_INFO "R [0x%03X] %016llX "
"%016llX %016llX %p", i,
(unsigned long long)le64_to_cpu(u1->a),
(unsigned long long)le64_to_cpu(u1->b),
(unsigned long long)buffer_info->dma,
buffer_info->skb);
pr_info("%s[0x%03X] %016llX %016llX %016llX %p%s\n",
"R ", i,
(unsigned long long)le64_to_cpu(u1->a),
(unsigned long long)le64_to_cpu(u1->b),
(unsigned long long)buffer_info->dma,
buffer_info->skb, next_desc);
if (netif_msg_pktdata(adapter))
print_hex_dump(KERN_INFO, "",
@ -456,13 +447,6 @@ rx_ring_summary:
adapter->rx_buffer_len,
true);
}
if (i == rx_ring->next_to_use)
printk(KERN_CONT " NTU\n");
else if (i == rx_ring->next_to_clean)
printk(KERN_CONT " NTC\n");
else
printk(KERN_CONT "\n");
}
}
@ -1222,8 +1206,7 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
adapter->flags2 |= FLAG2_IS_DISCARDING;
if (adapter->flags2 & FLAG2_IS_DISCARDING) {
e_dbg("Packet Split buffers didn't pick up the full "
"packet\n");
e_dbg("Packet Split buffers didn't pick up the full packet\n");
dev_kfree_skb_irq(skb);
if (staterr & E1000_RXD_STAT_EOP)
adapter->flags2 &= ~FLAG2_IS_DISCARDING;
@ -1238,8 +1221,7 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
length = le16_to_cpu(rx_desc->wb.middle.length0);
if (!length) {
e_dbg("Last part of the packet spanning multiple "
"descriptors\n");
e_dbg("Last part of the packet spanning multiple descriptors\n");
dev_kfree_skb_irq(skb);
goto next_desc;
}
@ -1917,8 +1899,7 @@ void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
return;
}
/* MSI-X failed, so fall through and try MSI */
e_err("Failed to initialize MSI-X interrupts. "
"Falling back to MSI interrupts.\n");
e_err("Failed to initialize MSI-X interrupts. Falling back to MSI interrupts.\n");
e1000e_reset_interrupt_capability(adapter);
}
adapter->int_mode = E1000E_INT_MODE_MSI;
@ -1928,8 +1909,7 @@ void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
adapter->flags |= FLAG_MSI_ENABLED;
} else {
adapter->int_mode = E1000E_INT_MODE_LEGACY;
e_err("Failed to initialize MSI interrupts. Falling "
"back to legacy interrupts.\n");
e_err("Failed to initialize MSI interrupts. Falling back to legacy interrupts.\n");
}
/* Fall through */
case E1000E_INT_MODE_LEGACY:
@ -3113,79 +3093,147 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
}
/**
* e1000_update_mc_addr_list - Update Multicast addresses
* @hw: pointer to the HW structure
* @mc_addr_list: array of multicast addresses to program
* @mc_addr_count: number of multicast addresses to program
*
* Updates the Multicast Table Array.
* The caller must have a packed mc_addr_list of multicast addresses.
**/
static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
u32 mc_addr_count)
{
hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count);
}
/**
* e1000_set_multi - Multicast and Promiscuous mode set
* e1000e_write_mc_addr_list - write multicast addresses to MTA
* @netdev: network interface device structure
*
* The set_multi entry point is called whenever the multicast address
* list or the network interface flags are updated. This routine is
* responsible for configuring the hardware for proper multicast,
* promiscuous mode, and all-multi behavior.
**/
static void e1000_set_multi(struct net_device *netdev)
* Writes multicast address list to the MTA hash table.
* Returns: -ENOMEM on failure
* 0 on no addresses written
* X on writing X addresses to MTA
*/
static int e1000e_write_mc_addr_list(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
struct netdev_hw_addr *ha;
u8 *mta_list;
u8 *mta_list;
int i;
if (netdev_mc_empty(netdev)) {
/* nothing to program, so clear mc list */
hw->mac.ops.update_mc_addr_list(hw, NULL, 0);
return 0;
}
mta_list = kzalloc(netdev_mc_count(netdev) * ETH_ALEN, GFP_ATOMIC);
if (!mta_list)
return -ENOMEM;
/* update_mc_addr_list expects a packed array of only addresses. */
i = 0;
netdev_for_each_mc_addr(ha, netdev)
memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
hw->mac.ops.update_mc_addr_list(hw, mta_list, i);
kfree(mta_list);
return netdev_mc_count(netdev);
}
/**
* e1000e_write_uc_addr_list - write unicast addresses to RAR table
* @netdev: network interface device structure
*
* Writes unicast address list to the RAR table.
* Returns: -ENOMEM on failure/insufficient address space
* 0 on no addresses written
* X on writing X addresses to the RAR table
**/
static int e1000e_write_uc_addr_list(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
unsigned int rar_entries = hw->mac.rar_entry_count;
int count = 0;
/* save a rar entry for our hardware address */
rar_entries--;
/* save a rar entry for the LAA workaround */
if (adapter->flags & FLAG_RESET_OVERWRITES_LAA)
rar_entries--;
/* return ENOMEM indicating insufficient memory for addresses */
if (netdev_uc_count(netdev) > rar_entries)
return -ENOMEM;
if (!netdev_uc_empty(netdev) && rar_entries) {
struct netdev_hw_addr *ha;
/*
* write the addresses in reverse order to avoid write
* combining
*/
netdev_for_each_uc_addr(ha, netdev) {
if (!rar_entries)
break;
e1000e_rar_set(hw, ha->addr, rar_entries--);
count++;
}
}
/* zero out the remaining RAR entries not used above */
for (; rar_entries > 0; rar_entries--) {
ew32(RAH(rar_entries), 0);
ew32(RAL(rar_entries), 0);
}
e1e_flush();
return count;
}
/**
* e1000e_set_rx_mode - secondary unicast, Multicast and Promiscuous mode set
* @netdev: network interface device structure
*
* The ndo_set_rx_mode entry point is called whenever the unicast or multicast
* address list or the network interface flags are updated. This routine is
* responsible for configuring the hardware for proper unicast, multicast,
* promiscuous mode, and all-multi behavior.
**/
static void e1000e_set_rx_mode(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
u32 rctl;
/* Check for Promiscuous and All Multicast modes */
rctl = er32(RCTL);
/* clear the affected bits */
rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
if (netdev->flags & IFF_PROMISC) {
rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
rctl &= ~E1000_RCTL_VFE;
/* Do not hardware filter VLANs in promisc mode */
e1000e_vlan_filter_disable(adapter);
} else {
int count;
if (netdev->flags & IFF_ALLMULTI) {
rctl |= E1000_RCTL_MPE;
rctl &= ~E1000_RCTL_UPE;
} else {
rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
/*
* Write addresses to the MTA, if the attempt fails
* then we should just turn on promiscuous mode so
* that we can at least receive multicast traffic
*/
count = e1000e_write_mc_addr_list(netdev);
if (count < 0)
rctl |= E1000_RCTL_MPE;
}
e1000e_vlan_filter_enable(adapter);
/*
* Write addresses to available RAR registers, if there is not
* sufficient space to store all the addresses then enable
* unicast promiscuous mode
*/
count = e1000e_write_uc_addr_list(netdev);
if (count < 0)
rctl |= E1000_RCTL_UPE;
}
ew32(RCTL, rctl);
if (!netdev_mc_empty(netdev)) {
int i = 0;
mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
if (!mta_list)
return;
/* prepare a packed array of only addresses. */
netdev_for_each_mc_addr(ha, netdev)
memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
e1000_update_mc_addr_list(hw, mta_list, i);
kfree(mta_list);
} else {
/*
* if we're called from probe, we might not have
* anything to do here, so clear out the list
*/
e1000_update_mc_addr_list(hw, NULL, 0);
}
if (netdev->features & NETIF_F_HW_VLAN_RX)
e1000e_vlan_strip_enable(adapter);
else
@ -3198,7 +3246,7 @@ static void e1000_set_multi(struct net_device *netdev)
**/
static void e1000_configure(struct e1000_adapter *adapter)
{
e1000_set_multi(adapter->netdev);
e1000e_set_rx_mode(adapter->netdev);
e1000_restore_vlan(adapter);
e1000_init_manageability_pt(adapter);
@ -4168,16 +4216,13 @@ static void e1000_print_link_info(struct e1000_adapter *adapter)
u32 ctrl = er32(CTRL);
/* Link status message must follow this format for user tools */
printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s, "
"Flow Control: %s\n",
adapter->netdev->name,
adapter->link_speed,
(adapter->link_duplex == FULL_DUPLEX) ?
"Full Duplex" : "Half Duplex",
((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
"Rx/Tx" :
((ctrl & E1000_CTRL_RFCE) ? "Rx" :
((ctrl & E1000_CTRL_TFCE) ? "Tx" : "None")));
printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
adapter->netdev->name,
adapter->link_speed,
adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half",
(ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE) ? "Rx/Tx" :
(ctrl & E1000_CTRL_RFCE) ? "Rx" :
(ctrl & E1000_CTRL_TFCE) ? "Tx" : "None");
}
static bool e1000e_has_link(struct e1000_adapter *adapter)
@ -4323,10 +4368,7 @@ static void e1000_watchdog_task(struct work_struct *work)
e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp);
if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS))
e_info("Autonegotiated half duplex but"
" link partner cannot autoneg. "
" Try forcing full duplex if "
"link gets many collisions.\n");
e_info("Autonegotiated half duplex but link partner cannot autoneg. Try forcing full duplex if link gets many collisions.\n");
}
/* adjust timeout factor according to speed/duplex */
@ -5110,8 +5152,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
if ((adapter->hw.mac.type == e1000_pch2lan) &&
!(adapter->flags2 & FLAG2_CRC_STRIPPING) &&
(new_mtu > ETH_DATA_LEN)) {
e_err("Jumbo Frames not supported on 82579 when CRC "
"stripping is disabled.\n");
e_err("Jumbo Frames not supported on 82579 when CRC stripping is disabled.\n");
return -EINVAL;
}
@ -5331,7 +5372,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
if (wufc) {
e1000_setup_rctl(adapter);
e1000_set_multi(netdev);
e1000e_set_rx_mode(netdev);
/* turn on all-multi mode if wake on multicast is enabled */
if (wufc & E1000_WUFC_MC) {
@ -5527,8 +5568,8 @@ static int __e1000_resume(struct pci_dev *pdev)
phy_data & E1000_WUS_MC ? "Multicast Packet" :
phy_data & E1000_WUS_BC ? "Broadcast Packet" :
phy_data & E1000_WUS_MAG ? "Magic Packet" :
phy_data & E1000_WUS_LNKC ? "Link Status "
" Change" : "other");
phy_data & E1000_WUS_LNKC ?
"Link Status Change" : "other");
}
e1e_wphy(&adapter->hw, BM_WUS, ~0);
} else {
@ -5885,7 +5926,7 @@ static const struct net_device_ops e1000e_netdev_ops = {
.ndo_stop = e1000_close,
.ndo_start_xmit = e1000_xmit_frame,
.ndo_get_stats64 = e1000e_get_stats64,
.ndo_set_rx_mode = e1000_set_multi,
.ndo_set_rx_mode = e1000e_set_rx_mode,
.ndo_set_mac_address = e1000_set_mac,
.ndo_change_mtu = e1000_change_mtu,
.ndo_do_ioctl = e1000_ioctl,
@ -5950,8 +5991,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
err = dma_set_coherent_mask(&pdev->dev,
DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev, "No usable DMA "
"configuration, aborting\n");
dev_err(&pdev->dev, "No usable DMA configuration, aborting\n");
goto err_dma;
}
}
@ -6077,6 +6117,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
NETIF_F_TSO6 |
NETIF_F_HW_CSUM);
netdev->priv_flags |= IFF_UNICAST_FLT;
if (pci_using_dac) {
netdev->features |= NETIF_F_HIGHDMA;
netdev->vlan_features |= NETIF_F_HIGHDMA;

5
drivers/net/ethernet/intel/igb/e1000_82575.c
View File

@ -29,6 +29,8 @@
* e1000_82576
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/types.h>
#include <linux/if_ether.h>
@ -244,8 +246,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
* Check for invalid size
*/
if ((hw->mac.type == e1000_82576) && (size > 15)) {
printk("igb: The NVM size is not valid, "
"defaulting to 32K.\n");
pr_notice("The NVM size is not valid, defaulting to 32K\n");
size = 15;
}
nvm->word_size = 1 << size;

165
drivers/net/ethernet/intel/igb/igb_main.c
View File

@ -25,6 +25,8 @@
*******************************************************************************/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
@ -325,16 +327,13 @@ static void igb_regdump(struct e1000_hw *hw, struct igb_reg_info *reginfo)
regs[n] = rd32(E1000_TXDCTL(n));
break;
default:
printk(KERN_INFO "%-15s %08x\n",
reginfo->name, rd32(reginfo->ofs));
pr_info("%-15s %08x\n", reginfo->name, rd32(reginfo->ofs));
return;
}
snprintf(rname, 16, "%s%s", reginfo->name, "[0-3]");
printk(KERN_INFO "%-15s ", rname);
for (n = 0; n < 4; n++)
printk(KERN_CONT "%08x ", regs[n]);
printk(KERN_CONT "\n");
pr_info("%-15s %08x %08x %08x %08x\n", rname, regs[0], regs[1],
regs[2], regs[3]);
}
/*
@ -359,18 +358,15 @@ static void igb_dump(struct igb_adapter *adapter)
/* Print netdevice Info */
if (netdev) {
dev_info(&adapter->pdev->dev, "Net device Info\n");
printk(KERN_INFO "Device Name state "
"trans_start last_rx\n");
printk(KERN_INFO "%-15s %016lX %016lX %016lX\n",
netdev->name,
netdev->state,
netdev->trans_start,
netdev->last_rx);
pr_info("Device Name state trans_start "
"last_rx\n");
pr_info("%-15s %016lX %016lX %016lX\n", netdev->name,
netdev->state, netdev->trans_start, netdev->last_rx);
}
/* Print Registers */
dev_info(&adapter->pdev->dev, "Register Dump\n");
printk(KERN_INFO " Register Name Value\n");
pr_info(" Register Name Value\n");
for (reginfo = (struct igb_reg_info *)igb_reg_info_tbl;
reginfo->name; reginfo++) {
igb_regdump(hw, reginfo);
@ -381,18 +377,17 @@ static void igb_dump(struct igb_adapter *adapter)
goto exit;
dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma ]"
" leng ntw timestamp\n");
pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n");
for (n = 0; n < adapter->num_tx_queues; n++) {
struct igb_tx_buffer *buffer_info;
tx_ring = adapter->tx_ring[n];
buffer_info = &tx_ring->tx_buffer_info[tx_ring->next_to_clean];
printk(KERN_INFO " %5d %5X %5X %016llX %04X %p %016llX\n",
n, tx_ring->next_to_use, tx_ring->next_to_clean,
(u64)buffer_info->dma,
buffer_info->length,
buffer_info->next_to_watch,
(u64)buffer_info->time_stamp);
pr_info(" %5d %5X %5X %016llX %04X %p %016llX\n",
n, tx_ring->next_to_use, tx_ring->next_to_clean,
(u64)buffer_info->dma,
buffer_info->length,
buffer_info->next_to_watch,
(u64)buffer_info->time_stamp);
}
/* Print TX Rings */
@ -414,36 +409,38 @@ static void igb_dump(struct igb_adapter *adapter)
for (n = 0; n < adapter->num_tx_queues; n++) {
tx_ring = adapter->tx_ring[n];
printk(KERN_INFO "------------------------------------\n");
printk(KERN_INFO "TX QUEUE INDEX = %d\n", tx_ring->queue_index);
printk(KERN_INFO "------------------------------------\n");
printk(KERN_INFO "T [desc] [address 63:0 ] "
"[PlPOCIStDDM Ln] [bi->dma ] "
"leng ntw timestamp bi->skb\n");
pr_info("------------------------------------\n");
pr_info("TX QUEUE INDEX = %d\n", tx_ring->queue_index);
pr_info("------------------------------------\n");
pr_info("T [desc] [address 63:0 ] [PlPOCIStDDM Ln] "
"[bi->dma ] leng ntw timestamp "
"bi->skb\n");
for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
const char *next_desc;
struct igb_tx_buffer *buffer_info;
tx_desc = IGB_TX_DESC(tx_ring, i);
buffer_info = &tx_ring->tx_buffer_info[i];
u0 = (struct my_u0 *)tx_desc;
printk(KERN_INFO "T [0x%03X] %016llX %016llX %016llX"
" %04X %p %016llX %p", i,
if (i == tx_ring->next_to_use &&
i == tx_ring->next_to_clean)
next_desc = " NTC/U";
else if (i == tx_ring->next_to_use)
next_desc = " NTU";
else if (i == tx_ring->next_to_clean)
next_desc = " NTC";
else
next_desc = "";
pr_info("T [0x%03X] %016llX %016llX %016llX"
" %04X %p %016llX %p%s\n", i,
le64_to_cpu(u0->a),
le64_to_cpu(u0->b),
(u64)buffer_info->dma,
buffer_info->length,
buffer_info->next_to_watch,
(u64)buffer_info->time_stamp,
buffer_info->skb);
if (i == tx_ring->next_to_use &&
i == tx_ring->next_to_clean)
printk(KERN_CONT " NTC/U\n");
else if (i == tx_ring->next_to_use)
printk(KERN_CONT " NTU\n");
else if (i == tx_ring->next_to_clean)
printk(KERN_CONT " NTC\n");
else
printk(KERN_CONT "\n");
buffer_info->skb, next_desc);
if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
print_hex_dump(KERN_INFO, "",
@ -456,11 +453,11 @@ static void igb_dump(struct igb_adapter *adapter)
/* Print RX Rings Summary */
rx_ring_summary:
dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
printk(KERN_INFO "Queue [NTU] [NTC]\n");
pr_info("Queue [NTU] [NTC]\n");
for (n = 0; n < adapter->num_rx_queues; n++) {
rx_ring = adapter->rx_ring[n];
printk(KERN_INFO " %5d %5X %5X\n", n,
rx_ring->next_to_use, rx_ring->next_to_clean);
pr_info(" %5d %5X %5X\n",
n, rx_ring->next_to_use, rx_ring->next_to_clean);
}
/* Print RX Rings */
@ -492,36 +489,43 @@ rx_ring_summary:
for (n = 0; n < adapter->num_rx_queues; n++) {
rx_ring = adapter->rx_ring[n];
printk(KERN_INFO "------------------------------------\n");
printk(KERN_INFO "RX QUEUE INDEX = %d\n", rx_ring->queue_index);
printk(KERN_INFO "------------------------------------\n");
printk(KERN_INFO "R [desc] [ PktBuf A0] "
"[ HeadBuf DD] [bi->dma ] [bi->skb] "
"<-- Adv Rx Read format\n");
printk(KERN_INFO "RWB[desc] [PcsmIpSHl PtRs] "
"[vl er S cks ln] ---------------- [bi->skb] "
"<-- Adv Rx Write-Back format\n");
pr_info("------------------------------------\n");
pr_info("RX QUEUE INDEX = %d\n", rx_ring->queue_index);
pr_info("------------------------------------\n");
pr_info("R [desc] [ PktBuf A0] [ HeadBuf DD] "
"[bi->dma ] [bi->skb] <-- Adv Rx Read format\n");
pr_info("RWB[desc] [PcsmIpSHl PtRs] [vl er S cks ln] -----"
"----------- [bi->skb] <-- Adv Rx Write-Back format\n");
for (i = 0; i < rx_ring->count; i++) {
const char *next_desc;
struct igb_rx_buffer *buffer_info;
buffer_info = &rx_ring->rx_buffer_info[i];
rx_desc = IGB_RX_DESC(rx_ring, i);
u0 = (struct my_u0 *)rx_desc;
staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
if (i == rx_ring->next_to_use)
next_desc = " NTU";
else if (i == rx_ring->next_to_clean)
next_desc = " NTC";
else
next_desc = "";
if (staterr & E1000_RXD_STAT_DD) {
/* Descriptor Done */
printk(KERN_INFO "RWB[0x%03X] %016llX "
"%016llX ---------------- %p", i,
pr_info("%s[0x%03X] %016llX %016llX -------"
"--------- %p%s\n", "RWB", i,
le64_to_cpu(u0->a),
le64_to_cpu(u0->b),
buffer_info->skb);
buffer_info->skb, next_desc);
} else {
printk(KERN_INFO "R [0x%03X] %016llX "
"%016llX %016llX %p", i,
pr_info("%s[0x%03X] %016llX %016llX %016llX"
" %p%s\n", "R ", i,
le64_to_cpu(u0->a),
le64_to_cpu(u0->b),
(u64)buffer_info->dma,
buffer_info->skb);
buffer_info->skb, next_desc);
if (netif_msg_pktdata(adapter)) {
print_hex_dump(KERN_INFO, "",
@ -538,14 +542,6 @@ rx_ring_summary:
PAGE_SIZE/2, true);
}
}
if (i == rx_ring->next_to_use)
printk(KERN_CONT " NTU\n");
else if (i == rx_ring->next_to_clean)
printk(KERN_CONT " NTC\n");
else
printk(KERN_CONT "\n");
}
}
@ -599,10 +595,10 @@ struct net_device *igb_get_hw_dev(struct e1000_hw *hw)
static int __init igb_init_module(void)
{
int ret;
printk(KERN_INFO "%s - version %s\n",
pr_info("%s - version %s\n",
igb_driver_string, igb_driver_version);
printk(KERN_INFO "%s\n", igb_copyright);
pr_info("%s\n", igb_copyright);
#ifdef CONFIG_IGB_DCA
dca_register_notify(&dca_notifier);
@ -3642,23 +3638,23 @@ static void igb_watchdog_task(struct work_struct *work)
ctrl = rd32(E1000_CTRL);
/* Links status message must follow this format */
printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s, "
"Flow Control: %s\n",
printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s "
"Duplex, Flow Control: %s\n",
netdev->name,
adapter->link_speed,
adapter->link_duplex == FULL_DUPLEX ?
"Full Duplex" : "Half Duplex",
((ctrl & E1000_CTRL_TFCE) &&
(ctrl & E1000_CTRL_RFCE)) ? "RX/TX" :
((ctrl & E1000_CTRL_RFCE) ? "RX" :
((ctrl & E1000_CTRL_TFCE) ? "TX" : "None")));
"Full" : "Half",
(ctrl & E1000_CTRL_TFCE) &&
(ctrl & E1000_CTRL_RFCE) ? "RX/TX" :
(ctrl & E1000_CTRL_RFCE) ? "RX" :
(ctrl & E1000_CTRL_TFCE) ? "TX" : "None");
/* check for thermal sensor event */
if (igb_thermal_sensor_event(hw, E1000_THSTAT_LINK_THROTTLE)) {
printk(KERN_INFO "igb: %s The network adapter "
"link speed was downshifted "
"because it overheated.\n",
netdev->name);
if (igb_thermal_sensor_event(hw,
E1000_THSTAT_LINK_THROTTLE)) {
netdev_info(netdev, "The network adapter link "
"speed was downshifted because it "
"overheated\n");
}
/* adjust timeout factor according to speed/duplex */
@ -3688,11 +3684,10 @@ static void igb_watchdog_task(struct work_struct *work)
adapter->link_duplex = 0;
/* check for thermal sensor event */
if (igb_thermal_sensor_event(hw, E1000_THSTAT_PWR_DOWN)) {
printk(KERN_ERR "igb: %s The network adapter "
"was stopped because it "
"overheated.\n",
netdev->name);
if (igb_thermal_sensor_event(hw,
E1000_THSTAT_PWR_DOWN)) {
netdev_err(netdev, "The network adapter was "
"stopped because it overheated\n");
}
/* Links status message must follow this format */

14
drivers/net/ethernet/intel/igbvf/netdev.c
View File

@ -25,6 +25,8 @@
*******************************************************************************/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
@ -1746,10 +1748,9 @@ void igbvf_update_stats(struct igbvf_adapter *adapter)
static void igbvf_print_link_info(struct igbvf_adapter *adapter)
{
dev_info(&adapter->pdev->dev, "Link is Up %d Mbps %s\n",
adapter->link_speed,
((adapter->link_duplex == FULL_DUPLEX) ?
"Full Duplex" : "Half Duplex"));
dev_info(&adapter->pdev->dev, "Link is Up %d Mbps %s Duplex\n",
adapter->link_speed,
adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half");
}
static bool igbvf_has_link(struct igbvf_adapter *adapter)
@ -2843,9 +2844,8 @@ static struct pci_driver igbvf_driver = {
static int __init igbvf_init_module(void)
{
int ret;
printk(KERN_INFO "%s - version %s\n",
igbvf_driver_string, igbvf_driver_version);
printk(KERN_INFO "%s\n", igbvf_copyright);
pr_info("%s - version %s\n", igbvf_driver_string, igbvf_driver_version);
pr_info("%s\n", igbvf_copyright);
ret = pci_register_driver(&igbvf_driver);

2
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
View File

@ -572,7 +572,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
/* reply to reset with ack and vf mac address */
msgbuf[0] = IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK;
memcpy(new_mac, vf_mac, IXGBE_ETH_LENGTH_OF_ADDRESS);
memcpy(new_mac, vf_mac, ETH_ALEN);
/*
* Piggyback the multicast filter type so VF can compute the
* correct vectors

8
drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
View File

@ -1710,8 +1710,6 @@ enum {
#define IXGBE_NVM_POLL_WRITE 1 /* Flag for polling for write complete */
#define IXGBE_NVM_POLL_READ 0 /* Flag for polling for read complete */
#define IXGBE_ETH_LENGTH_OF_ADDRESS 6
#define IXGBE_EEPROM_PAGE_SIZE_MAX 128
#define IXGBE_EEPROM_RD_BUFFER_MAX_COUNT 512 /* EEPROM words # read in burst */
#define IXGBE_EEPROM_WR_BUFFER_MAX_COUNT 256 /* EEPROM words # wr in burst */
@ -2802,9 +2800,9 @@ struct ixgbe_eeprom_info {
struct ixgbe_mac_info {
struct ixgbe_mac_operations ops;
enum ixgbe_mac_type type;
u8 addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
u8 perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
u8 san_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
u8 addr[ETH_ALEN];
u8 perm_addr[ETH_ALEN];
u8 san_addr[ETH_ALEN];
/* prefix for World Wide Node Name (WWNN) */
u16 wwnn_prefix;
/* prefix for World Wide Port Name (WWPN) */

18
drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
View File

@ -751,16 +751,20 @@ static s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index)
{
u32 macc_reg;
u32 ledctl_reg;
ixgbe_link_speed speed;
bool link_up;
/*
* In order for the blink bit in the LED control register
* to work, link and speed must be forced in the MAC. We
* will reverse this when we stop the blinking.
* Link should be up in order for the blink bit in the LED control
* register to work. Force link and speed in the MAC if link is down.
* This will be reversed when we stop the blinking.
*/
macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS;
IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
hw->mac.ops.check_link(hw, &speed, &link_up, false);
if (link_up == false) {
macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS;
IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
}
/* Set the LED to LINK_UP + BLINK. */
ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);

1
drivers/net/ethernet/intel/ixgbevf/defines.h
View File

@ -35,7 +35,6 @@
#define IXGBE_VF_IRQ_CLEAR_MASK 7
#define IXGBE_VF_MAX_TX_QUEUES 1
#define IXGBE_VF_MAX_RX_QUEUES 1
#define IXGBE_ETH_LENGTH_OF_ADDRESS 6
/* Link speed */
typedef u32 ixgbe_link_speed;

6
drivers/net/ethernet/intel/ixgbevf/ethtool.c
View File

@ -27,6 +27,8 @@
/* ethtool support for ixgbevf */
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/types.h>
#include <linux/module.h>
#include <linux/slab.h>
@ -549,8 +551,8 @@ static const u32 register_test_patterns[] = {
writel((W & M), (adapter->hw.hw_addr + R)); \
val = readl(adapter->hw.hw_addr + R); \
if ((W & M) != (val & M)) { \
printk(KERN_ERR "set/check reg %04X test failed: got 0x%08X " \
"expected 0x%08X\n", R, (val & M), (W & M)); \
pr_err("set/check reg %04X test failed: got 0x%08X expected " \
"0x%08X\n", R, (val & M), (W & M)); \
*data = R; \
writel(before, (adapter->hw.hw_addr + R)); \
return 1; \

27
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
View File

@ -29,6 +29,9 @@
/******************************************************************************
Copyright (c)2006 - 2007 Myricom, Inc. for some LRO specific code
******************************************************************************/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/types.h>
#include <linux/bitops.h>
#include <linux/module.h>
@ -1437,7 +1440,7 @@ static int ixgbevf_write_uc_addr_list(struct net_device *netdev)
int count = 0;
if ((netdev_uc_count(netdev)) > 10) {
printk(KERN_ERR "Too many unicast filters - No Space\n");
pr_err("Too many unicast filters - No Space\n");
return -ENOSPC;
}
@ -2135,7 +2138,7 @@ static int ixgbevf_init_interrupt_scheme(struct ixgbevf_adapter *adapter)
err = ixgbevf_alloc_queues(adapter);
if (err) {
printk(KERN_ERR "Unable to allocate memory for queues\n");
pr_err("Unable to allocate memory for queues\n");
goto err_alloc_queues;
}
@ -2189,7 +2192,7 @@ static int __devinit ixgbevf_sw_init(struct ixgbevf_adapter *adapter)
} else {
err = hw->mac.ops.init_hw(hw);
if (err) {
printk(KERN_ERR "init_shared_code failed: %d\n", err);
pr_err("init_shared_code failed: %d\n", err);
goto out;
}
}
@ -2630,8 +2633,8 @@ static int ixgbevf_open(struct net_device *netdev)
* the vf can't start. */
if (hw->adapter_stopped) {
err = IXGBE_ERR_MBX;
printk(KERN_ERR "Unable to start - perhaps the PF"
" Driver isn't up yet\n");
pr_err("Unable to start - perhaps the PF Driver isn't "
"up yet\n");
goto err_setup_reset;
}
}
@ -2842,10 +2845,8 @@ static bool ixgbevf_tx_csum(struct ixgbevf_adapter *adapter,
break;
default:
if (unlikely(net_ratelimit())) {
printk(KERN_WARNING
"partial checksum but "
"proto=%x!\n",
skb->protocol);
pr_warn("partial checksum but "
"proto=%x!\n", skb->protocol);
}
break;
}
@ -3415,7 +3416,7 @@ static int __devinit ixgbevf_probe(struct pci_dev *pdev,
memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->dev_addr)) {
printk(KERN_ERR "invalid MAC address\n");
pr_err("invalid MAC address\n");
err = -EIO;
goto err_sw_init;
}
@ -3536,10 +3537,10 @@ static struct pci_driver ixgbevf_driver = {
static int __init ixgbevf_init_module(void)
{
int ret;
printk(KERN_INFO "ixgbevf: %s - version %s\n", ixgbevf_driver_string,
ixgbevf_driver_version);
pr_info("%s - version %s\n", ixgbevf_driver_string,
ixgbevf_driver_version);
printk(KERN_INFO "%s\n", ixgbevf_copyright);
pr_info("%s\n", ixgbevf_copyright);
ret = pci_register_driver(&ixgbevf_driver);
return ret;

4
drivers/net/ethernet/intel/ixgbevf/vf.c
View File

@ -108,7 +108,7 @@ static s32 ixgbevf_reset_hw_vf(struct ixgbe_hw *hw)
if (msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK))
return IXGBE_ERR_INVALID_MAC_ADDR;
memcpy(hw->mac.perm_addr, addr, IXGBE_ETH_LENGTH_OF_ADDRESS);
memcpy(hw->mac.perm_addr, addr, ETH_ALEN);
hw->mac.mc_filter_type = msgbuf[IXGBE_VF_MC_TYPE_WORD];
return 0;
@ -211,7 +211,7 @@ static s32 ixgbevf_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
**/
static s32 ixgbevf_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr)
{
memcpy(mac_addr, hw->mac.perm_addr, IXGBE_ETH_LENGTH_OF_ADDRESS);
memcpy(mac_addr, hw->mac.perm_addr, ETH_ALEN);
return 0;
}