From 58475fb908485ab38860d6970a8063987fe1d619 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Thu, 24 Sep 2009 13:04:53 +0100 Subject: [PATCH 001/743] mtd: nand: fix htmldocs warnings Fixed following htmldocs warnings: DOCPROC Documentation/DocBook/mtdnand.xml Warning(drivers/mtd/nand/nand_base.c:769): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:785): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:824): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:947): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:996): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:1040): No description found for parameter 'page' Signed-off-by: Jaswinder Singh Rajput Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 22113865438b..2957cc70da3d 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -761,6 +761,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * Not for syndrome calculating ecc controllers, which use a special oob layout */ @@ -777,6 +778,7 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * We need a special oob layout and handling even when OOB isn't used. */ @@ -818,6 +820,7 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *c * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read */ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int page) @@ -939,6 +942,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3 * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * Not for syndrome calculating ecc controllers which need a special oob layout */ @@ -983,6 +987,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * Hardware ECC for large page chips, require OOB to be read first. * For this ECC mode, the write_page method is re-used from ECC_HW. @@ -1031,6 +1036,7 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * The hw generator calculates the error syndrome automatically. Therefor * we need a special oob layout and handling. From f5bae56a501347671b18095731d78e13eee5205f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 24 Sep 2009 15:11:37 -0400 Subject: [PATCH 002/743] mtd/maps: gpio-addr-flash: pull in linux/ headers rather than asm/ Now that there are linux/ versions of gpio.h and io.h, include those rather than hitting the asm/ versions. Signed-off-by: Mike Frysinger Signed-off-by: David Woodhouse --- drivers/mtd/maps/gpio-addr-flash.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c index 44ef9a49a860..1ad5caf9fe69 100644 --- a/drivers/mtd/maps/gpio-addr-flash.c +++ b/drivers/mtd/maps/gpio-addr-flash.c @@ -13,7 +13,9 @@ * Licensed under the GPL-2 or later. */ +#include #include +#include #include #include #include @@ -23,9 +25,6 @@ #include #include -#include -#include - #define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); }) #define DRIVER_NAME "gpio-addr-flash" From de19d02b731478877ce8b1ccf371c2b2142ac80e Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 24 Sep 2009 15:11:38 -0400 Subject: [PATCH 003/743] mtd/maps: gpio-addr-flash: depend on GPIO arch support The driver requires gpio functionality, so make sure we depend on that in the Kconfig menu. Signed-off-by: Mike Frysinger Signed-off-by: David Woodhouse --- drivers/mtd/maps/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 3a9a960644b6..0fc67a2c5783 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -486,6 +486,7 @@ config MTD_BFIN_ASYNC config MTD_GPIO_ADDR tristate "GPIO-assisted Flash Chip Support" + depends on GENERIC_GPIO || GPIOLIB depends on MTD_COMPLEX_MAPPINGS select MTD_PARTITIONS help From c5cca146aa03e1f60fb179df65f0dbaf17bc64ed Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 9 Oct 2009 18:31:20 +0200 Subject: [PATCH 004/743] x86/amd-iommu: Workaround for erratum 63 There is an erratum for IOMMU hardware which documents undefined behavior when forwarding SMI requests from peripherals and the DTE of that peripheral has a sysmgt value of 01b. This problem caused weird IO_PAGE_FAULTS in my case. This patch implements the suggested workaround for that erratum into the AMD IOMMU driver. The erratum is documented with number 63. Cc: stable@kernel.org Signed-off-by: Joerg Roedel --- arch/x86/include/asm/amd_iommu.h | 1 + arch/x86/kernel/amd_iommu.c | 2 ++ arch/x86/kernel/amd_iommu_init.c | 22 ++++++++++++++++++++++ 3 files changed, 25 insertions(+) diff --git a/arch/x86/include/asm/amd_iommu.h b/arch/x86/include/asm/amd_iommu.h index bdf96f119f06..9dbd4030f0cd 100644 --- a/arch/x86/include/asm/amd_iommu.h +++ b/arch/x86/include/asm/amd_iommu.h @@ -30,6 +30,7 @@ extern irqreturn_t amd_iommu_int_handler(int irq, void *data); extern void amd_iommu_flush_all_domains(void); extern void amd_iommu_flush_all_devices(void); extern void amd_iommu_shutdown(void); +extern void amd_iommu_apply_erratum_63(u16 devid); #else static inline int amd_iommu_init(void) { return -ENODEV; } static inline void amd_iommu_detect(void) { } diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 6c99f5037801..f95dfe526444 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -1114,6 +1114,8 @@ static void __detach_device(struct protection_domain *domain, u16 devid) amd_iommu_dev_table[devid].data[1] = 0; amd_iommu_dev_table[devid].data[2] = 0; + amd_iommu_apply_erratum_63(devid); + /* decrease reference counter */ domain->dev_cnt -= 1; diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index c1b17e97252e..498c8c79aaa5 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -509,6 +509,26 @@ static void set_dev_entry_bit(u16 devid, u8 bit) amd_iommu_dev_table[devid].data[i] |= (1 << _bit); } +static int get_dev_entry_bit(u16 devid, u8 bit) +{ + int i = (bit >> 5) & 0x07; + int _bit = bit & 0x1f; + + return (amd_iommu_dev_table[devid].data[i] & (1 << _bit)) >> _bit; +} + + +void amd_iommu_apply_erratum_63(u16 devid) +{ + int sysmgt; + + sysmgt = get_dev_entry_bit(devid, DEV_ENTRY_SYSMGT1) | + (get_dev_entry_bit(devid, DEV_ENTRY_SYSMGT2) << 1); + + if (sysmgt == 0x01) + set_dev_entry_bit(devid, DEV_ENTRY_IW); +} + /* Writes the specific IOMMU for a device into the rlookup table */ static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid) { @@ -537,6 +557,8 @@ static void __init set_dev_entry_from_acpi(struct amd_iommu *iommu, if (flags & ACPI_DEVFLAG_LINT1) set_dev_entry_bit(devid, DEV_ENTRY_LINT1_PASS); + amd_iommu_apply_erratum_63(devid); + set_iommu_for_device(iommu, devid); } From e33497aaaef5ec9998cf7b007b13d74bb41be74e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 12 Oct 2009 13:32:38 +1000 Subject: [PATCH 005/743] drm/radeon/kms: don't refuse LUT because no framebuffer. The fb binding might be happening in a subsequent crtc setup call. gets rid of some lut issues. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 3655d91993a6..b8f234497aca 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -137,9 +137,6 @@ static void radeon_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, if (size != 256) { return; } - if (crtc->fb == NULL) { - return; - } /* userspace palettes are always correct as is */ for (i = 0; i < 256; i++) { @@ -147,7 +144,6 @@ static void radeon_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, radeon_crtc->lut_g[i] = green[i] >> 6; radeon_crtc->lut_b[i] = blue[i] >> 6; } - radeon_crtc_load_lut(crtc); } From f30f37def4c72e5df8d949022b806e5a4e99bbcb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Thu, 8 Oct 2009 10:44:09 +0200 Subject: [PATCH 006/743] drm/radeon/kms: Update memory bandwidth requirements in mode_set_base hook. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The hook may change the number of bytes per pixel being scanned out, which affects the CRTC memory bandwidth requirements. E.g. booting in 8bpp and then running X in 32bpp would result in the bandwidth requirements being underestimated for the latter and consequently in CRTC FIFO underruns causing visible artifacts with 3D intensive workloads. ATOM changes only compile-tested. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 5 ++++- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 7 ++++--- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 14fa9701aeb3..38a87cc6eb12 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -563,6 +563,10 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y, radeon_fb = to_radeon_framebuffer(old_fb); radeon_gem_object_unpin(radeon_fb->obj); } + + /* Bytes per pixel may have changed */ + radeon_bandwidth_update(rdev); + return 0; } @@ -701,7 +705,6 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc, } atombios_overscan_setup(crtc, mode, adjusted_mode); atombios_scaler_setup(crtc); - radeon_bandwidth_update(rdev); return 0; } diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index 36410f85d705..ec2df739c119 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -532,6 +532,10 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y, radeon_fb = to_radeon_framebuffer(old_fb); radeon_gem_object_unpin(radeon_fb->obj); } + + /* Bytes per pixel may have changed */ + radeon_bandwidth_update(rdev); + return 0; } @@ -1015,14 +1019,11 @@ static int radeon_crtc_mode_set(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); - struct drm_device *dev = crtc->dev; - struct radeon_device *rdev = dev->dev_private; /* TODO TV */ radeon_crtc_set_base(crtc, x, y, old_fb); radeon_set_crtc_timing(crtc, adjusted_mode); radeon_set_pll(crtc, adjusted_mode); - radeon_bandwidth_update(rdev); if (radeon_crtc->crtc_id == 0) { radeon_legacy_rmx_mode_set(crtc, mode, adjusted_mode); } else { From b5fc901002db0519093ec723fd98969bc03cd629 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Thu, 8 Oct 2009 10:44:10 +0200 Subject: [PATCH 007/743] drm/radeon/kms: Fix apparent typo in legacy CRTC memory bandwidth calculation. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit While investigating the cause of CRTC FIFO underruns, I noticed that when converting the memory bandwidth calculation from the userspace X driver code, an instance of '8.0' was apparently accidentally converted to '80'. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 374ecacc6183..33198dd5706c 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -2350,7 +2350,7 @@ void r100_bandwidth_update(struct radeon_device *rdev) /* Find the total latency for the display data. */ - disp_latency_overhead.full = rfixed_const(80); + disp_latency_overhead.full = rfixed_const(8); disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff); mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full; mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full; From 2ffb842948ba64b03986f4064140a74c1780c44b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Oct 2009 13:02:19 -0400 Subject: [PATCH 008/743] drm/radeon/kms: make sure LVDS panel is valid in detect() If the panel data is bogus this can lead to problems later when the hardware trys to set the mode. If the data is invalid, report LVDS as disconnected. Should fix fdo bug 24247. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index e376be47a4a0..466f6010a2e4 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -415,8 +415,20 @@ static int radeon_lvds_mode_valid(struct drm_connector *connector, static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connector) { - enum drm_connector_status ret = connector_status_connected; + enum drm_connector_status ret = connector_status_disconnected; + struct drm_encoder *encoder = radeon_best_single_encoder(connector); + + if (encoder) { + struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + + /* check if panel is valid */ + if (native_mode->panel_xres >= 320 && native_mode->panel_yres >= 240) + ret = connector_status_connected; + + } /* check acpi lid status ??? */ + radeon_connector_update_scratch_regs(connector, ret); return ret; } From 5f9a0eb5af16906cd31fc3e02746aa3d61fd3aa9 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Oct 2009 13:08:29 -0400 Subject: [PATCH 009/743] drm/radeon/kms/atom: reorder crtc dpms Based on recommendation from bios docs. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 38a87cc6eb12..0a5082af3cd3 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -248,18 +248,18 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode) switch (mode) { case DRM_MODE_DPMS_ON: + atombios_enable_crtc(crtc, 1); if (ASIC_IS_DCE3(rdev)) atombios_enable_crtc_memreq(crtc, 1); - atombios_enable_crtc(crtc, 1); atombios_blank_crtc(crtc, 0); break; case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: case DRM_MODE_DPMS_OFF: atombios_blank_crtc(crtc, 1); - atombios_enable_crtc(crtc, 0); if (ASIC_IS_DCE3(rdev)) atombios_enable_crtc_memreq(crtc, 0); + atombios_enable_crtc(crtc, 0); break; } From 2606c88608122339cbd5c6b5c149a2eb74ccfe9e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Oct 2009 13:36:21 -0400 Subject: [PATCH 010/743] drm/radeon/kms/atom: add support for AdjustDisplayPll DCE3+ has an AdjustDisplayPll that will adjust the pixel clock accordingly based on the encoder/transmitter to handle special hw requirements. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 36 +++++++++++++++++++++----- 1 file changed, 30 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 0a5082af3cd3..d5e6f3da116c 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -333,12 +333,13 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) struct drm_encoder *encoder = NULL; struct radeon_encoder *radeon_encoder = NULL; uint8_t frev, crev; - int index = GetIndexIntoMasterTable(COMMAND, SetPixelClock); + int index; SET_PIXEL_CLOCK_PS_ALLOCATION args; PIXEL_CLOCK_PARAMETERS *spc1_ptr; PIXEL_CLOCK_PARAMETERS_V2 *spc2_ptr; PIXEL_CLOCK_PARAMETERS_V3 *spc3_ptr; - uint32_t sclock = mode->clock; + uint32_t pll_clock = mode->clock; + uint32_t adjusted_clock; uint32_t ref_div = 0, fb_div = 0, frac_fb_div = 0, post_div = 0; struct radeon_pll *pll; int pll_flags = 0; @@ -393,12 +394,34 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) } } + /* DCE3+ has an AdjustDisplayPll that will adjust the pixel clock + * accordingly based on the encoder/transmitter to work around + * special hw requirements. + */ + if (ASIC_IS_DCE3(rdev)) { + ADJUST_DISPLAY_PLL_PS_ALLOCATION adjust_pll_args; + + if (!encoder) + return; + + memset(&adjust_pll_args, 0, sizeof(adjust_pll_args)); + adjust_pll_args.usPixelClock = cpu_to_le16(mode->clock / 10); + adjust_pll_args.ucTransmitterID = radeon_encoder->encoder_id; + adjust_pll_args.ucEncodeMode = atombios_get_encoder_mode(encoder); + + index = GetIndexIntoMasterTable(COMMAND, AdjustDisplayPll); + atom_execute_table(rdev->mode_info.atom_context, + index, (uint32_t *)&adjust_pll_args); + adjusted_clock = le16_to_cpu(adjust_pll_args.usPixelClock) * 10; + } else + adjusted_clock = mode->clock; + if (radeon_crtc->crtc_id == 0) pll = &rdev->clock.p1pll; else pll = &rdev->clock.p2pll; - radeon_compute_pll(pll, mode->clock, &sclock, &fb_div, &frac_fb_div, + radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, &ref_div, &post_div, pll_flags); atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, @@ -409,7 +432,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) switch (crev) { case 1: spc1_ptr = (PIXEL_CLOCK_PARAMETERS *) & args.sPCLKInput; - spc1_ptr->usPixelClock = cpu_to_le16(sclock); + spc1_ptr->usPixelClock = cpu_to_le16(mode->clock / 10); spc1_ptr->usRefDiv = cpu_to_le16(ref_div); spc1_ptr->usFbDiv = cpu_to_le16(fb_div); spc1_ptr->ucFracFbDiv = frac_fb_div; @@ -422,7 +445,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) case 2: spc2_ptr = (PIXEL_CLOCK_PARAMETERS_V2 *) & args.sPCLKInput; - spc2_ptr->usPixelClock = cpu_to_le16(sclock); + spc2_ptr->usPixelClock = cpu_to_le16(mode->clock / 10); spc2_ptr->usRefDiv = cpu_to_le16(ref_div); spc2_ptr->usFbDiv = cpu_to_le16(fb_div); spc2_ptr->ucFracFbDiv = frac_fb_div; @@ -437,7 +460,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) return; spc3_ptr = (PIXEL_CLOCK_PARAMETERS_V3 *) & args.sPCLKInput; - spc3_ptr->usPixelClock = cpu_to_le16(sclock); + spc3_ptr->usPixelClock = cpu_to_le16(mode->clock / 10); spc3_ptr->usRefDiv = cpu_to_le16(ref_div); spc3_ptr->usFbDiv = cpu_to_le16(fb_div); spc3_ptr->ucFracFbDiv = frac_fb_div; @@ -460,6 +483,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) } printk("executing set pll\n"); + index = GetIndexIntoMasterTable(COMMAND, SetPixelClock); atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } From 5a9bcacc0a56f0d9577494e834519480018a6cc3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Oct 2009 15:09:31 -0400 Subject: [PATCH 011/743] drm/radeon/kms/atom: rework crtc modeset - clean up tv timing handling - unify SetCRTC_Timing and SetCRTC_UsingDTDTiming Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 221 +++++++---------------- drivers/gpu/drm/radeon/radeon_atombios.c | 85 ++++++--- drivers/gpu/drm/radeon/radeon_encoders.c | 18 ++ 3 files changed, 144 insertions(+), 180 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index d5e6f3da116c..7522af1b9e46 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -270,59 +270,89 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode) static void atombios_set_crtc_dtd_timing(struct drm_crtc *crtc, - SET_CRTC_USING_DTD_TIMING_PARAMETERS * crtc_param) + struct drm_display_mode *mode) { + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; - SET_CRTC_USING_DTD_TIMING_PARAMETERS conv_param; + SET_CRTC_USING_DTD_TIMING_PARAMETERS args; int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_UsingDTDTiming); + u16 misc = 0; - conv_param.usH_Size = cpu_to_le16(crtc_param->usH_Size); - conv_param.usH_Blanking_Time = - cpu_to_le16(crtc_param->usH_Blanking_Time); - conv_param.usV_Size = cpu_to_le16(crtc_param->usV_Size); - conv_param.usV_Blanking_Time = - cpu_to_le16(crtc_param->usV_Blanking_Time); - conv_param.usH_SyncOffset = cpu_to_le16(crtc_param->usH_SyncOffset); - conv_param.usH_SyncWidth = cpu_to_le16(crtc_param->usH_SyncWidth); - conv_param.usV_SyncOffset = cpu_to_le16(crtc_param->usV_SyncOffset); - conv_param.usV_SyncWidth = cpu_to_le16(crtc_param->usV_SyncWidth); - conv_param.susModeMiscInfo.usAccess = - cpu_to_le16(crtc_param->susModeMiscInfo.usAccess); - conv_param.ucCRTC = crtc_param->ucCRTC; + memset(&args, 0, sizeof(args)); + args.usH_Size = cpu_to_le16(mode->crtc_hdisplay); + args.usH_Blanking_Time = + cpu_to_le16(mode->crtc_hblank_end - mode->crtc_hdisplay); + args.usV_Size = cpu_to_le16(mode->crtc_vdisplay); + args.usV_Blanking_Time = + cpu_to_le16(mode->crtc_vblank_end - mode->crtc_vdisplay); + args.usH_SyncOffset = + cpu_to_le16(mode->crtc_hsync_start - mode->crtc_hdisplay); + args.usH_SyncWidth = + cpu_to_le16(mode->crtc_hsync_end - mode->crtc_hsync_start); + args.usV_SyncOffset = + cpu_to_le16(mode->crtc_vsync_start - mode->crtc_vdisplay); + args.usV_SyncWidth = + cpu_to_le16(mode->crtc_vsync_end - mode->crtc_vsync_start); + /*args.ucH_Border = mode->hborder;*/ + /*args.ucV_Border = mode->vborder;*/ + + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + misc |= ATOM_VSYNC_POLARITY; + if (mode->flags & DRM_MODE_FLAG_NHSYNC) + misc |= ATOM_HSYNC_POLARITY; + if (mode->flags & DRM_MODE_FLAG_CSYNC) + misc |= ATOM_COMPOSITESYNC; + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + misc |= ATOM_INTERLACE; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + misc |= ATOM_DOUBLE_CLOCK_MODE; + + args.susModeMiscInfo.usAccess = cpu_to_le16(misc); + args.ucCRTC = radeon_crtc->crtc_id; printk("executing set crtc dtd timing\n"); - atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&conv_param); + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } -void atombios_crtc_set_timing(struct drm_crtc *crtc, - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION * - crtc_param) +static void atombios_crtc_set_timing(struct drm_crtc *crtc, + struct drm_display_mode *mode) { + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION conv_param; + SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION args; int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_Timing); + u16 misc = 0; - conv_param.usH_Total = cpu_to_le16(crtc_param->usH_Total); - conv_param.usH_Disp = cpu_to_le16(crtc_param->usH_Disp); - conv_param.usH_SyncStart = cpu_to_le16(crtc_param->usH_SyncStart); - conv_param.usH_SyncWidth = cpu_to_le16(crtc_param->usH_SyncWidth); - conv_param.usV_Total = cpu_to_le16(crtc_param->usV_Total); - conv_param.usV_Disp = cpu_to_le16(crtc_param->usV_Disp); - conv_param.usV_SyncStart = cpu_to_le16(crtc_param->usV_SyncStart); - conv_param.usV_SyncWidth = cpu_to_le16(crtc_param->usV_SyncWidth); - conv_param.susModeMiscInfo.usAccess = - cpu_to_le16(crtc_param->susModeMiscInfo.usAccess); - conv_param.ucCRTC = crtc_param->ucCRTC; - conv_param.ucOverscanRight = crtc_param->ucOverscanRight; - conv_param.ucOverscanLeft = crtc_param->ucOverscanLeft; - conv_param.ucOverscanBottom = crtc_param->ucOverscanBottom; - conv_param.ucOverscanTop = crtc_param->ucOverscanTop; - conv_param.ucReserved = crtc_param->ucReserved; + memset(&args, 0, sizeof(args)); + args.usH_Total = cpu_to_le16(mode->crtc_htotal); + args.usH_Disp = cpu_to_le16(mode->crtc_hdisplay); + args.usH_SyncStart = cpu_to_le16(mode->crtc_hsync_start); + args.usH_SyncWidth = + cpu_to_le16(mode->crtc_hsync_end - mode->crtc_hsync_start); + args.usV_Total = cpu_to_le16(mode->crtc_vtotal); + args.usV_Disp = cpu_to_le16(mode->crtc_vdisplay); + args.usV_SyncStart = cpu_to_le16(mode->crtc_vsync_start); + args.usV_SyncWidth = + cpu_to_le16(mode->crtc_vsync_end - mode->crtc_vsync_start); + + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + misc |= ATOM_VSYNC_POLARITY; + if (mode->flags & DRM_MODE_FLAG_NHSYNC) + misc |= ATOM_HSYNC_POLARITY; + if (mode->flags & DRM_MODE_FLAG_CSYNC) + misc |= ATOM_COMPOSITESYNC; + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + misc |= ATOM_INTERLACE; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + misc |= ATOM_DOUBLE_CLOCK_MODE; + + args.susModeMiscInfo.usAccess = cpu_to_le16(misc); + args.ucCRTC = radeon_crtc->crtc_id; printk("executing set crtc timing\n"); - atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&conv_param); + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) @@ -602,128 +632,17 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc, struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; - struct drm_encoder *encoder; - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION crtc_timing; - int need_tv_timings = 0; - bool ret; /* TODO color tiling */ - memset(&crtc_timing, 0, sizeof(crtc_timing)); - - list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { - /* find tv std */ - if (encoder->crtc == crtc) { - struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - - if (radeon_encoder->active_device & ATOM_DEVICE_TV_SUPPORT) { - struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv; - if (tv_dac) { - if (tv_dac->tv_std == TV_STD_NTSC || - tv_dac->tv_std == TV_STD_NTSC_J || - tv_dac->tv_std == TV_STD_PAL_M) - need_tv_timings = 1; - else - need_tv_timings = 2; - break; - } - } - } - } - - crtc_timing.ucCRTC = radeon_crtc->crtc_id; - if (need_tv_timings) { - ret = radeon_atom_get_tv_timings(rdev, need_tv_timings - 1, - &crtc_timing, &adjusted_mode->clock); - if (ret == false) - need_tv_timings = 0; - } - - if (!need_tv_timings) { - crtc_timing.usH_Total = adjusted_mode->crtc_htotal; - crtc_timing.usH_Disp = adjusted_mode->crtc_hdisplay; - crtc_timing.usH_SyncStart = adjusted_mode->crtc_hsync_start; - crtc_timing.usH_SyncWidth = - adjusted_mode->crtc_hsync_end - adjusted_mode->crtc_hsync_start; - - crtc_timing.usV_Total = adjusted_mode->crtc_vtotal; - crtc_timing.usV_Disp = adjusted_mode->crtc_vdisplay; - crtc_timing.usV_SyncStart = adjusted_mode->crtc_vsync_start; - crtc_timing.usV_SyncWidth = - adjusted_mode->crtc_vsync_end - adjusted_mode->crtc_vsync_start; - - if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_VSYNC_POLARITY; - - if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_HSYNC_POLARITY; - - if (adjusted_mode->flags & DRM_MODE_FLAG_CSYNC) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_COMPOSITESYNC; - - if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_INTERLACE; - - if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_DOUBLE_CLOCK_MODE; - } atombios_crtc_set_pll(crtc, adjusted_mode); - atombios_crtc_set_timing(crtc, &crtc_timing); + atombios_crtc_set_timing(crtc, adjusted_mode); if (ASIC_IS_AVIVO(rdev)) atombios_crtc_set_base(crtc, x, y, old_fb); else { - if (radeon_crtc->crtc_id == 0) { - SET_CRTC_USING_DTD_TIMING_PARAMETERS crtc_dtd_timing; - memset(&crtc_dtd_timing, 0, sizeof(crtc_dtd_timing)); - - /* setup FP shadow regs on R4xx */ - crtc_dtd_timing.ucCRTC = radeon_crtc->crtc_id; - crtc_dtd_timing.usH_Size = adjusted_mode->crtc_hdisplay; - crtc_dtd_timing.usV_Size = adjusted_mode->crtc_vdisplay; - crtc_dtd_timing.usH_Blanking_Time = - adjusted_mode->crtc_hblank_end - - adjusted_mode->crtc_hdisplay; - crtc_dtd_timing.usV_Blanking_Time = - adjusted_mode->crtc_vblank_end - - adjusted_mode->crtc_vdisplay; - crtc_dtd_timing.usH_SyncOffset = - adjusted_mode->crtc_hsync_start - - adjusted_mode->crtc_hdisplay; - crtc_dtd_timing.usV_SyncOffset = - adjusted_mode->crtc_vsync_start - - adjusted_mode->crtc_vdisplay; - crtc_dtd_timing.usH_SyncWidth = - adjusted_mode->crtc_hsync_end - - adjusted_mode->crtc_hsync_start; - crtc_dtd_timing.usV_SyncWidth = - adjusted_mode->crtc_vsync_end - - adjusted_mode->crtc_vsync_start; - /* crtc_dtd_timing.ucH_Border = adjusted_mode->crtc_hborder; */ - /* crtc_dtd_timing.ucV_Border = adjusted_mode->crtc_vborder; */ - - if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_VSYNC_POLARITY; - - if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_HSYNC_POLARITY; - - if (adjusted_mode->flags & DRM_MODE_FLAG_CSYNC) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_COMPOSITESYNC; - - if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_INTERLACE; - - if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_DOUBLE_CLOCK_MODE; - - atombios_set_crtc_dtd_timing(crtc, &crtc_dtd_timing); - } + if (radeon_crtc->crtc_id == 0) + atombios_set_crtc_dtd_timing(crtc, adjusted_mode); radeon_crtc_set_base(crtc, x, y, old_fb); radeon_legacy_atom_set_surface(crtc); } diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 5b6c08cee40e..979ddfdf209c 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -857,8 +857,7 @@ radeon_atombios_get_primary_dac_info(struct radeon_encoder *encoder) } bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION *crtc_timing, - int32_t *pixel_clock) + struct drm_display_mode *mode) { struct radeon_mode_info *mode_info = &rdev->mode_info; ATOM_ANALOG_TV_INFO *tv_info; @@ -866,7 +865,7 @@ bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, ATOM_DTD_FORMAT *dtd_timings; int data_index = GetIndexIntoMasterTable(DATA, AnalogTV_Info); u8 frev, crev; - uint16_t data_offset; + u16 data_offset, misc; atom_parse_data_header(mode_info->atom_context, data_index, NULL, &frev, &crev, &data_offset); @@ -876,28 +875,37 @@ bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, if (index > MAX_SUPPORTED_TV_TIMING) return false; - crtc_timing->usH_Total = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Total); - crtc_timing->usH_Disp = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Disp); - crtc_timing->usH_SyncStart = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncStart); - crtc_timing->usH_SyncWidth = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncWidth); + mode->crtc_htotal = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Total); + mode->crtc_hdisplay = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Disp); + mode->crtc_hsync_start = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncStart); + mode->crtc_hsync_end = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncStart) + + le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncWidth); - crtc_timing->usV_Total = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Total); - crtc_timing->usV_Disp = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Disp); - crtc_timing->usV_SyncStart = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncStart); - crtc_timing->usV_SyncWidth = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncWidth); + mode->crtc_vtotal = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Total); + mode->crtc_vdisplay = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Disp); + mode->crtc_vsync_start = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncStart); + mode->crtc_vsync_end = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncStart) + + le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncWidth); - crtc_timing->susModeMiscInfo = tv_info->aModeTimings[index].susModeMiscInfo; + mode->flags = 0; + misc = le16_to_cpu(tv_info->aModeTimings[index].susModeMiscInfo.usAccess); + if (misc & ATOM_VSYNC_POLARITY) + mode->flags |= DRM_MODE_FLAG_NVSYNC; + if (misc & ATOM_HSYNC_POLARITY) + mode->flags |= DRM_MODE_FLAG_NHSYNC; + if (misc & ATOM_COMPOSITESYNC) + mode->flags |= DRM_MODE_FLAG_CSYNC; + if (misc & ATOM_INTERLACE) + mode->flags |= DRM_MODE_FLAG_INTERLACE; + if (misc & ATOM_DOUBLE_CLOCK_MODE) + mode->flags |= DRM_MODE_FLAG_DBLSCAN; - crtc_timing->ucOverscanRight = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanRight); - crtc_timing->ucOverscanLeft = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanLeft); - crtc_timing->ucOverscanBottom = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanBottom); - crtc_timing->ucOverscanTop = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanTop); - *pixel_clock = le16_to_cpu(tv_info->aModeTimings[index].usPixelClock) * 10; + mode->clock = le16_to_cpu(tv_info->aModeTimings[index].usPixelClock) * 10; if (index == 1) { /* PAL timings appear to have wrong values for totals */ - crtc_timing->usH_Total -= 1; - crtc_timing->usV_Total -= 1; + mode->crtc_htotal -= 1; + mode->crtc_vtotal -= 1; } break; case 2: @@ -906,17 +914,36 @@ bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, return false; dtd_timings = &tv_info_v1_2->aModeTimings[index]; - crtc_timing->usH_Total = le16_to_cpu(dtd_timings->usHActive) + le16_to_cpu(dtd_timings->usHBlanking_Time); - crtc_timing->usH_Disp = le16_to_cpu(dtd_timings->usHActive); - crtc_timing->usH_SyncStart = le16_to_cpu(dtd_timings->usHActive) + le16_to_cpu(dtd_timings->usHSyncOffset); - crtc_timing->usH_SyncWidth = le16_to_cpu(dtd_timings->usHSyncWidth); - crtc_timing->usV_Total = le16_to_cpu(dtd_timings->usVActive) + le16_to_cpu(dtd_timings->usVBlanking_Time); - crtc_timing->usV_Disp = le16_to_cpu(dtd_timings->usVActive); - crtc_timing->usV_SyncStart = le16_to_cpu(dtd_timings->usVActive) + le16_to_cpu(dtd_timings->usVSyncOffset); - crtc_timing->usV_SyncWidth = le16_to_cpu(dtd_timings->usVSyncWidth); + mode->crtc_htotal = le16_to_cpu(dtd_timings->usHActive) + + le16_to_cpu(dtd_timings->usHBlanking_Time); + mode->crtc_hdisplay = le16_to_cpu(dtd_timings->usHActive); + mode->crtc_hsync_start = le16_to_cpu(dtd_timings->usHActive) + + le16_to_cpu(dtd_timings->usHSyncOffset); + mode->crtc_hsync_end = mode->crtc_hsync_start + + le16_to_cpu(dtd_timings->usHSyncWidth); - crtc_timing->susModeMiscInfo.usAccess = le16_to_cpu(dtd_timings->susModeMiscInfo.usAccess); - *pixel_clock = le16_to_cpu(dtd_timings->usPixClk) * 10; + mode->crtc_vtotal = le16_to_cpu(dtd_timings->usVActive) + + le16_to_cpu(dtd_timings->usVBlanking_Time); + mode->crtc_vdisplay = le16_to_cpu(dtd_timings->usVActive); + mode->crtc_vsync_start = le16_to_cpu(dtd_timings->usVActive) + + le16_to_cpu(dtd_timings->usVSyncOffset); + mode->crtc_vsync_end = mode->crtc_vsync_start + + le16_to_cpu(dtd_timings->usVSyncWidth); + + mode->flags = 0; + misc = le16_to_cpu(dtd_timings->susModeMiscInfo.usAccess); + if (misc & ATOM_VSYNC_POLARITY) + mode->flags |= DRM_MODE_FLAG_NVSYNC; + if (misc & ATOM_HSYNC_POLARITY) + mode->flags |= DRM_MODE_FLAG_NHSYNC; + if (misc & ATOM_COMPOSITESYNC) + mode->flags |= DRM_MODE_FLAG_CSYNC; + if (misc & ATOM_INTERLACE) + mode->flags |= DRM_MODE_FLAG_INTERLACE; + if (misc & ATOM_DOUBLE_CLOCK_MODE) + mode->flags |= DRM_MODE_FLAG_DBLSCAN; + + mode->clock = le16_to_cpu(dtd_timings->usPixClk) * 10; break; } return true; diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index a65ab1a0dad2..3e58c6eccea5 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -31,6 +31,10 @@ extern int atom_debug; +/* evil but including atombios.h is much worse */ +bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, + struct drm_display_mode *mode); + uint32_t radeon_get_encoder_id(struct drm_device *dev, uint32_t supported_device, uint8_t dac) { @@ -219,6 +223,8 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *adjusted_mode) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct drm_device *dev = encoder->dev; + struct radeon_device *rdev = dev->dev_private; drm_mode_set_crtcinfo(adjusted_mode, 0); @@ -230,6 +236,18 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, && (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2))) adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2; + if (radeon_encoder->active_device & ATOM_DEVICE_TV_SUPPORT) { + struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv; + if (tv_dac) { + if (tv_dac->tv_std == TV_STD_NTSC || + tv_dac->tv_std == TV_STD_NTSC_J || + tv_dac->tv_std == TV_STD_PAL_M) + radeon_atom_get_tv_timings(rdev, 0, adjusted_mode); + else + radeon_atom_get_tv_timings(rdev, 1, adjusted_mode); + } + } + return true; } From de2103e452ec7f2db5db7c44279735688608381d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 9 Oct 2009 15:14:30 -0400 Subject: [PATCH 012/743] drm/radeon/kms: use drm_mode directly for panel modes This reduces the number of mode format conversions needed and makes native panel mode support cleaner. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 32 ++++++----- drivers/gpu/drm/radeon/radeon_combios.c | 62 ++++++++++----------- drivers/gpu/drm/radeon/radeon_connectors.c | 55 +++++++----------- drivers/gpu/drm/radeon/radeon_display.c | 6 +- drivers/gpu/drm/radeon/radeon_encoders.c | 48 +++------------- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 30 +++++----- drivers/gpu/drm/radeon/radeon_mode.h | 19 ++----- 7 files changed, 95 insertions(+), 157 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 979ddfdf209c..79d4b771c770 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -798,27 +798,29 @@ struct radeon_encoder_atom_dig *radeon_atombios_get_lvds_info(struct if (!lvds) return NULL; - lvds->native_mode.dotclock = + lvds->native_mode.clock = le16_to_cpu(lvds_info->info.sLCDTiming.usPixClk) * 10; - lvds->native_mode.panel_xres = + lvds->native_mode.hdisplay = le16_to_cpu(lvds_info->info.sLCDTiming.usHActive); - lvds->native_mode.panel_yres = + lvds->native_mode.vdisplay = le16_to_cpu(lvds_info->info.sLCDTiming.usVActive); - lvds->native_mode.hblank = - le16_to_cpu(lvds_info->info.sLCDTiming.usHBlanking_Time); - lvds->native_mode.hoverplus = - le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncOffset); - lvds->native_mode.hsync_width = - le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncWidth); - lvds->native_mode.vblank = - le16_to_cpu(lvds_info->info.sLCDTiming.usVBlanking_Time); - lvds->native_mode.voverplus = - le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncOffset); - lvds->native_mode.vsync_width = - le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncWidth); + lvds->native_mode.htotal = lvds->native_mode.hdisplay + + le16_to_cpu(lvds_info->info.sLCDTiming.usHBlanking_Time); + lvds->native_mode.hsync_start = lvds->native_mode.hdisplay + + le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncOffset); + lvds->native_mode.hsync_end = lvds->native_mode.hsync_start + + le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncWidth); + lvds->native_mode.vtotal = lvds->native_mode.vdisplay + + le16_to_cpu(lvds_info->info.sLCDTiming.usVBlanking_Time); + lvds->native_mode.vsync_start = lvds->native_mode.vdisplay + + le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncWidth); + lvds->native_mode.vsync_end = lvds->native_mode.vsync_start + + le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncWidth); lvds->panel_pwr_delay = le16_to_cpu(lvds_info->info.usOffDelayInMs); lvds->lvds_misc = lvds_info->info.ucLVDS_Misc; + /* set crtc values */ + drm_mode_set_crtcinfo(&lvds->native_mode, CRTC_INTERLACE_HALVE_V); encoder->native_mode = lvds->native_mode; } diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 748265a105b3..e91aba8530b6 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -808,25 +808,25 @@ static struct radeon_encoder_lvds *radeon_legacy_get_lvds_info_from_regs(struct lvds->panel_blon_delay = (lvds_ss_gen_cntl >> RADEON_LVDS_PWRSEQ_DELAY2_SHIFT) & 0xf; if (fp_vert_stretch & RADEON_VERT_STRETCH_ENABLE) - lvds->native_mode.panel_yres = + lvds->native_mode.vdisplay = ((fp_vert_stretch & RADEON_VERT_PANEL_SIZE) >> RADEON_VERT_PANEL_SHIFT) + 1; else - lvds->native_mode.panel_yres = + lvds->native_mode.vdisplay = (RREG32(RADEON_CRTC_V_TOTAL_DISP) >> 16) + 1; if (fp_horz_stretch & RADEON_HORZ_STRETCH_ENABLE) - lvds->native_mode.panel_xres = + lvds->native_mode.hdisplay = (((fp_horz_stretch & RADEON_HORZ_PANEL_SIZE) >> RADEON_HORZ_PANEL_SHIFT) + 1) * 8; else - lvds->native_mode.panel_xres = + lvds->native_mode.hdisplay = ((RREG32(RADEON_CRTC_H_TOTAL_DISP) >> 16) + 1) * 8; - if ((lvds->native_mode.panel_xres < 640) || - (lvds->native_mode.panel_yres < 480)) { - lvds->native_mode.panel_xres = 640; - lvds->native_mode.panel_yres = 480; + if ((lvds->native_mode.hdisplay < 640) || + (lvds->native_mode.vdisplay < 480)) { + lvds->native_mode.hdisplay = 640; + lvds->native_mode.vdisplay = 480; } ppll_div_sel = RREG8(RADEON_CLOCK_CNTL_INDEX + 1) & 0x3; @@ -846,8 +846,8 @@ static struct radeon_encoder_lvds *radeon_legacy_get_lvds_info_from_regs(struct lvds->panel_vcc_delay = 200; DRM_INFO("Panel info derived from registers\n"); - DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.panel_xres, - lvds->native_mode.panel_yres); + DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.hdisplay, + lvds->native_mode.vdisplay); return lvds; } @@ -882,11 +882,11 @@ struct radeon_encoder_lvds *radeon_combios_get_lvds_info(struct radeon_encoder DRM_INFO("Panel ID String: %s\n", stmp); - lvds->native_mode.panel_xres = RBIOS16(lcd_info + 0x19); - lvds->native_mode.panel_yres = RBIOS16(lcd_info + 0x1b); + lvds->native_mode.hdisplay = RBIOS16(lcd_info + 0x19); + lvds->native_mode.vdisplay = RBIOS16(lcd_info + 0x1b); - DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.panel_xres, - lvds->native_mode.panel_yres); + DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.hdisplay, + lvds->native_mode.vdisplay); lvds->panel_vcc_delay = RBIOS16(lcd_info + 0x2c); if (lvds->panel_vcc_delay > 2000 || lvds->panel_vcc_delay < 0) @@ -944,27 +944,25 @@ struct radeon_encoder_lvds *radeon_combios_get_lvds_info(struct radeon_encoder if (tmp == 0) break; - if ((RBIOS16(tmp) == lvds->native_mode.panel_xres) && + if ((RBIOS16(tmp) == lvds->native_mode.hdisplay) && (RBIOS16(tmp + 2) == - lvds->native_mode.panel_yres)) { - lvds->native_mode.hblank = - (RBIOS16(tmp + 17) - RBIOS16(tmp + 19)) * 8; - lvds->native_mode.hoverplus = - (RBIOS16(tmp + 21) - RBIOS16(tmp + 19) - - 1) * 8; - lvds->native_mode.hsync_width = - RBIOS8(tmp + 23) * 8; + lvds->native_mode.vdisplay)) { + lvds->native_mode.htotal = RBIOS16(tmp + 17) * 8; + lvds->native_mode.hsync_start = RBIOS16(tmp + 21) * 8; + lvds->native_mode.hsync_end = (RBIOS8(tmp + 23) + + RBIOS16(tmp + 21)) * 8; - lvds->native_mode.vblank = (RBIOS16(tmp + 24) - - RBIOS16(tmp + 26)); - lvds->native_mode.voverplus = - ((RBIOS16(tmp + 28) & 0x7ff) - - RBIOS16(tmp + 26)); - lvds->native_mode.vsync_width = - ((RBIOS16(tmp + 28) & 0xf800) >> 11); - lvds->native_mode.dotclock = - RBIOS16(tmp + 9) * 10; + lvds->native_mode.vtotal = RBIOS16(tmp + 24); + lvds->native_mode.vsync_start = RBIOS16(tmp + 28) & 0x7ff; + lvds->native_mode.vsync_end = + ((RBIOS16(tmp + 28) & 0xf800) >> 11) + + (RBIOS16(tmp + 28) & 0x7ff); + + lvds->native_mode.clock = RBIOS16(tmp + 9) * 10; lvds->native_mode.flags = 0; + /* set crtc values */ + drm_mode_set_crtcinfo(&lvds->native_mode, CRTC_INTERLACE_HALVE_V); + } } } else { diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 466f6010a2e4..da3a049e3640 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -178,25 +178,13 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode struct drm_device *dev = encoder->dev; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_display_mode *mode = NULL; - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; - if (native_mode->panel_xres != 0 && - native_mode->panel_yres != 0 && - native_mode->dotclock != 0) { + if (native_mode->hdisplay != 0 && + native_mode->vdisplay != 0 && + native_mode->clock != 0) { mode = drm_mode_create(dev); - - mode->hdisplay = native_mode->panel_xres; - mode->vdisplay = native_mode->panel_yres; - - mode->htotal = mode->hdisplay + native_mode->hblank; - mode->hsync_start = mode->hdisplay + native_mode->hoverplus; - mode->hsync_end = mode->hsync_start + native_mode->hsync_width; - mode->vtotal = mode->vdisplay + native_mode->vblank; - mode->vsync_start = mode->vdisplay + native_mode->voverplus; - mode->vsync_end = mode->vsync_start + native_mode->vsync_width; - mode->clock = native_mode->dotclock; - mode->flags = 0; - + *mode = *native_mode; mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER; drm_mode_set_name(mode); @@ -210,7 +198,7 @@ static void radeon_add_common_modes(struct drm_encoder *encoder, struct drm_conn struct drm_device *dev = encoder->dev; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_display_mode *mode = NULL; - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; int i; struct mode_size { int w; @@ -237,10 +225,10 @@ static void radeon_add_common_modes(struct drm_encoder *encoder, struct drm_conn for (i = 0; i < 17; i++) { if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { - if (common_modes[i].w > native_mode->panel_xres || - common_modes[i].h > native_mode->panel_yres || - (common_modes[i].w == native_mode->panel_xres && - common_modes[i].h == native_mode->panel_yres)) + if (common_modes[i].w > native_mode->hdisplay || + common_modes[i].h > native_mode->vdisplay || + (common_modes[i].w == native_mode->hdisplay && + common_modes[i].h == native_mode->vdisplay)) continue; } if (common_modes[i].w < 320 || common_modes[i].h < 200) @@ -344,28 +332,23 @@ static void radeon_fixup_lvds_native_mode(struct drm_encoder *encoder, struct drm_connector *connector) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; /* Try to get native mode details from EDID if necessary */ - if (!native_mode->dotclock) { + if (!native_mode->clock) { struct drm_display_mode *t, *mode; list_for_each_entry_safe(mode, t, &connector->probed_modes, head) { - if (mode->hdisplay == native_mode->panel_xres && - mode->vdisplay == native_mode->panel_yres) { - native_mode->hblank = mode->htotal - mode->hdisplay; - native_mode->hoverplus = mode->hsync_start - mode->hdisplay; - native_mode->hsync_width = mode->hsync_end - mode->hsync_start; - native_mode->vblank = mode->vtotal - mode->vdisplay; - native_mode->voverplus = mode->vsync_start - mode->vdisplay; - native_mode->vsync_width = mode->vsync_end - mode->vsync_start; - native_mode->dotclock = mode->clock; + if (mode->hdisplay == native_mode->hdisplay && + mode->vdisplay == native_mode->vdisplay) { + *native_mode = *mode; + drm_mode_set_crtcinfo(native_mode, CRTC_INTERLACE_HALVE_V); DRM_INFO("Determined LVDS native mode details from EDID\n"); break; } } } - if (!native_mode->dotclock) { + if (!native_mode->clock) { DRM_INFO("No LVDS native mode details, disabling RMX\n"); radeon_encoder->rmx_type = RMX_OFF; } @@ -420,10 +403,10 @@ static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connec if (encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; /* check if panel is valid */ - if (native_mode->panel_xres >= 320 && native_mode->panel_yres >= 240) + if (native_mode->hdisplay >= 320 && native_mode->vdisplay >= 240) ret = connector_status_connected; } diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index b8f234497aca..a20bf43389b3 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -761,7 +761,7 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc, radeon_crtc->rmx_type = radeon_encoder->rmx_type; memcpy(&radeon_crtc->native_mode, &radeon_encoder->native_mode, - sizeof(struct radeon_native_mode)); + sizeof(struct drm_display_mode)); first = false; } else { if (radeon_crtc->rmx_type != radeon_encoder->rmx_type) { @@ -779,10 +779,10 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc, if (radeon_crtc->rmx_type != RMX_OFF) { fixed20_12 a, b; a.full = rfixed_const(crtc->mode.vdisplay); - b.full = rfixed_const(radeon_crtc->native_mode.panel_xres); + b.full = rfixed_const(radeon_crtc->native_mode.hdisplay); radeon_crtc->vsc.full = rfixed_div(a, b); a.full = rfixed_const(crtc->mode.hdisplay); - b.full = rfixed_const(radeon_crtc->native_mode.panel_yres); + b.full = rfixed_const(radeon_crtc->native_mode.vdisplay); radeon_crtc->hsc.full = rfixed_div(a, b); } else { radeon_crtc->vsc.full = rfixed_const(1); diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 3e58c6eccea5..a9d4e0ab049a 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -171,49 +171,15 @@ void radeon_rmx_mode_fixup(struct drm_encoder *encoder, struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; - if (mode->hdisplay < native_mode->panel_xres || - mode->vdisplay < native_mode->panel_yres) { - if (ASIC_IS_AVIVO(rdev)) { - adjusted_mode->hdisplay = native_mode->panel_xres; - adjusted_mode->vdisplay = native_mode->panel_yres; - adjusted_mode->htotal = native_mode->panel_xres + native_mode->hblank; - adjusted_mode->hsync_start = native_mode->panel_xres + native_mode->hoverplus; - adjusted_mode->hsync_end = adjusted_mode->hsync_start + native_mode->hsync_width; - adjusted_mode->vtotal = native_mode->panel_yres + native_mode->vblank; - adjusted_mode->vsync_start = native_mode->panel_yres + native_mode->voverplus; - adjusted_mode->vsync_end = adjusted_mode->vsync_start + native_mode->vsync_width; - /* update crtc values */ - drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); - /* adjust crtc values */ - adjusted_mode->crtc_hdisplay = native_mode->panel_xres; - adjusted_mode->crtc_vdisplay = native_mode->panel_yres; - adjusted_mode->crtc_htotal = adjusted_mode->crtc_hdisplay + native_mode->hblank; - adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hdisplay + native_mode->hoverplus; - adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + native_mode->hsync_width; - adjusted_mode->crtc_vtotal = adjusted_mode->crtc_vdisplay + native_mode->vblank; - adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + native_mode->voverplus; - adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + native_mode->vsync_width; - } else { - adjusted_mode->htotal = native_mode->panel_xres + native_mode->hblank; - adjusted_mode->hsync_start = native_mode->panel_xres + native_mode->hoverplus; - adjusted_mode->hsync_end = adjusted_mode->hsync_start + native_mode->hsync_width; - adjusted_mode->vtotal = native_mode->panel_yres + native_mode->vblank; - adjusted_mode->vsync_start = native_mode->panel_yres + native_mode->voverplus; - adjusted_mode->vsync_end = adjusted_mode->vsync_start + native_mode->vsync_width; - /* update crtc values */ - drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); - /* adjust crtc values */ - adjusted_mode->crtc_htotal = adjusted_mode->crtc_hdisplay + native_mode->hblank; - adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hdisplay + native_mode->hoverplus; - adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + native_mode->hsync_width; - adjusted_mode->crtc_vtotal = adjusted_mode->crtc_vdisplay + native_mode->vblank; - adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + native_mode->voverplus; - adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + native_mode->vsync_width; + if (mode->hdisplay < native_mode->hdisplay || + mode->vdisplay < native_mode->vdisplay) { + *adjusted_mode = *native_mode; + if (!ASIC_IS_AVIVO(rdev)) { + adjusted_mode->hdisplay = mode->hdisplay; + adjusted_mode->vdisplay = mode->vdisplay; } - adjusted_mode->flags = native_mode->flags; - adjusted_mode->clock = native_mode->dotclock; } } diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index ec2df739c119..d22a195cf152 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -48,7 +48,7 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, u32 fp_horz_stretch, fp_vert_stretch, fp_horz_vert_active; u32 fp_h_sync_strt_wid, fp_crtc_h_total_disp; u32 fp_v_sync_strt_wid, fp_crtc_v_total_disp; - struct radeon_native_mode *native_mode = &radeon_crtc->native_mode; + struct drm_display_mode *native_mode = &radeon_crtc->native_mode; fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) & (RADEON_VERT_STRETCH_RESERVED | @@ -95,19 +95,19 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, fp_horz_vert_active = 0; - if (native_mode->panel_xres == 0 || - native_mode->panel_yres == 0) { + if (native_mode->hdisplay == 0 || + native_mode->vdisplay == 0) { hscale = false; vscale = false; } else { - if (xres > native_mode->panel_xres) - xres = native_mode->panel_xres; - if (yres > native_mode->panel_yres) - yres = native_mode->panel_yres; + if (xres > native_mode->hdisplay) + xres = native_mode->hdisplay; + if (yres > native_mode->vdisplay) + yres = native_mode->vdisplay; - if (xres == native_mode->panel_xres) + if (xres == native_mode->hdisplay) hscale = false; - if (yres == native_mode->panel_yres) + if (yres == native_mode->vdisplay) vscale = false; } @@ -119,11 +119,11 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, else { inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0; scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX) - / native_mode->panel_xres + 1; + / native_mode->hdisplay + 1; fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) | RADEON_HORZ_STRETCH_BLEND | RADEON_HORZ_STRETCH_ENABLE | - ((native_mode->panel_xres/8-1) << 16)); + ((native_mode->hdisplay/8-1) << 16)); } if (!vscale) @@ -131,11 +131,11 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, else { inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0; scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX) - / native_mode->panel_yres + 1; + / native_mode->vdisplay + 1; fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) | RADEON_VERT_STRETCH_ENABLE | RADEON_VERT_STRETCH_BLEND | - ((native_mode->panel_yres-1) << 12)); + ((native_mode->vdisplay-1) << 12)); } break; case RMX_CENTER: @@ -175,8 +175,8 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, ? RADEON_CRTC_V_SYNC_POL : 0))); - fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) | - (((native_mode->panel_xres / 8) & 0x1ff) << 16)); + fp_horz_vert_active = (((native_mode->vdisplay) & 0xfff) | + (((native_mode->hdisplay / 8) & 0x1ff) << 16)); break; case RMX_OFF: default: diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index e61226817ccf..3d2631be073c 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -186,17 +186,6 @@ struct radeon_mode_info { }; -struct radeon_native_mode { - /* preferred mode */ - uint32_t panel_xres, panel_yres; - uint32_t hoverplus, hsync_width; - uint32_t hblank; - uint32_t voverplus, vsync_width; - uint32_t vblank; - uint32_t dotclock; - uint32_t flags; -}; - #define MAX_H_CODE_TIMING_LEN 32 #define MAX_V_CODE_TIMING_LEN 32 @@ -228,7 +217,7 @@ struct radeon_crtc { enum radeon_rmx_type rmx_type; fixed20_12 vsc; fixed20_12 hsc; - struct radeon_native_mode native_mode; + struct drm_display_mode native_mode; }; struct radeon_encoder_primary_dac { @@ -248,7 +237,7 @@ struct radeon_encoder_lvds { bool use_bios_dividers; uint32_t lvds_gen_cntl; /* panel mode */ - struct radeon_native_mode native_mode; + struct drm_display_mode native_mode; }; struct radeon_encoder_tv_dac { @@ -279,7 +268,7 @@ struct radeon_encoder_atom_dig { uint32_t lvds_misc; uint16_t panel_pwr_delay; /* panel mode */ - struct radeon_native_mode native_mode; + struct drm_display_mode native_mode; }; struct radeon_encoder_atom_dac { @@ -294,7 +283,7 @@ struct radeon_encoder { uint32_t flags; uint32_t pixel_clock; enum radeon_rmx_type rmx_type; - struct radeon_native_mode native_mode; + struct drm_display_mode native_mode; void *enc_priv; }; From 0549a061b545d232d12836f98c7c4965dd83f837 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 9 Oct 2009 18:41:19 -0400 Subject: [PATCH 013/743] drm/radeon/kms: also check for edid in lvds detect In case the system has bad native mode info but valid edid. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index da3a049e3640..17d5659cff03 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -398,8 +398,10 @@ static int radeon_lvds_mode_valid(struct drm_connector *connector, static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connector) { - enum drm_connector_status ret = connector_status_disconnected; + struct radeon_connector *radeon_connector = to_radeon_connector(connector); struct drm_encoder *encoder = radeon_best_single_encoder(connector); + enum drm_connector_status ret = connector_status_disconnected; + bool dret; if (encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); @@ -410,6 +412,15 @@ static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connec ret = connector_status_connected; } + + /* check for edid as well */ + if (radeon_connector->ddc_bus) { + radeon_i2c_do_lock(radeon_connector, 1); + dret = radeon_ddc_probe(radeon_connector); + radeon_i2c_do_lock(radeon_connector, 0); + if (dret) + ret = connector_status_connected; + } /* check acpi lid status ??? */ radeon_connector_update_scratch_regs(connector, ret); From ceeb50279b3d05eb7ea2b67e90acb2110d09325f Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 12 Oct 2009 13:54:10 +1000 Subject: [PATCH 014/743] drm/radeon: Revert "drm/r600: avoid assigning vb twice in blit code" This reverts commit 49c458e544ae14514209ed80ea6829ca1b18ddf0. It seems to have some side effects in the non-kms cases. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_blit.c | 10 +++++++--- drivers/gpu/drm/radeon/r600_blit_kms.c | 3 +-- 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c index dec501081608..d988eece0187 100644 --- a/drivers/gpu/drm/radeon/r600_blit.c +++ b/drivers/gpu/drm/radeon/r600_blit.c @@ -582,6 +582,8 @@ r600_blit_copy(struct drm_device *dev, u64 vb_addr; u32 *vb; + vb = r600_nomm_get_vb_ptr(dev); + if ((size_bytes & 3) || (src_gpu_addr & 3) || (dst_gpu_addr & 3)) { max_bytes = 8192; @@ -617,8 +619,8 @@ r600_blit_copy(struct drm_device *dev, if (!dev_priv->blit_vb) return; set_shaders(dev); + vb = r600_nomm_get_vb_ptr(dev); } - vb = r600_nomm_get_vb_ptr(dev); vb[0] = i2f(dst_x); vb[1] = 0; @@ -706,8 +708,8 @@ r600_blit_copy(struct drm_device *dev, return; set_shaders(dev); + vb = r600_nomm_get_vb_ptr(dev); } - vb = r600_nomm_get_vb_ptr(dev); vb[0] = i2f(dst_x / 4); vb[1] = 0; @@ -775,6 +777,8 @@ r600_blit_swap(struct drm_device *dev, u64 vb_addr; u32 *vb; + vb = r600_nomm_get_vb_ptr(dev); + if ((dev_priv->blit_vb->used + 48) > dev_priv->blit_vb->total) { r600_nomm_put_vb(dev); @@ -783,8 +787,8 @@ r600_blit_swap(struct drm_device *dev, return; set_shaders(dev); + vb = r600_nomm_get_vb_ptr(dev); } - vb = r600_nomm_get_vb_ptr(dev); if (cpp == 4) { cb_format = COLOR_8_8_8_8; diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c index 93108bb31d1d..acae33e2ad51 100644 --- a/drivers/gpu/drm/radeon/r600_blit_kms.c +++ b/drivers/gpu/drm/radeon/r600_blit_kms.c @@ -610,6 +610,7 @@ void r600_kms_blit_copy(struct radeon_device *rdev, DRM_DEBUG("emitting copy %16llx %16llx %d %d\n", src_gpu_addr, dst_gpu_addr, size_bytes, rdev->r600_blit.vb_used); + vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used); if ((size_bytes & 3) || (src_gpu_addr & 3) || (dst_gpu_addr & 3)) { max_bytes = 8192; @@ -652,7 +653,6 @@ void r600_kms_blit_copy(struct radeon_device *rdev, vb = r600_nomm_get_vb_ptr(dev); #endif } - vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used); vb[0] = i2f(dst_x); vb[1] = 0; @@ -747,7 +747,6 @@ void r600_kms_blit_copy(struct radeon_device *rdev, vb = r600_nomm_get_vb_ptr(dev); } #endif - vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used); vb[0] = i2f(dst_x / 4); vb[1] = 0; From 39deb2d67515086f08a672e7574716ca0d3883a5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 12 Oct 2009 14:21:19 +1000 Subject: [PATCH 015/743] drm/radeon/kms: fix use of index before proper initialisation. With the adjust table introduction, we need to fill out index before getting the table version. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 7522af1b9e46..3409aa3cbee4 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -454,6 +454,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, &ref_div, &post_div, pll_flags); + index = GetIndexIntoMasterTable(COMMAND, SetPixelClock); atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev); @@ -513,7 +514,6 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) } printk("executing set pll\n"); - index = GetIndexIntoMasterTable(COMMAND, SetPixelClock); atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } From fb06ca8f8c61dfd7cbfa2092756577ff78a26dcd Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 12 Oct 2009 11:25:05 -0400 Subject: [PATCH 016/743] drm/radeon/kms: properly handle mode id with native mode changes drm modes are objects with indentifiers. Make sure to preserve the mode id when copying mode params. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 3 +-- drivers/gpu/drm/radeon/radeon_encoders.c | 2 ++ 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 17d5659cff03..729207a1e83e 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -183,8 +183,7 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode if (native_mode->hdisplay != 0 && native_mode->vdisplay != 0 && native_mode->clock != 0) { - mode = drm_mode_create(dev); - *mode = *native_mode; + mode = drm_mode_duplicate(dev, native_mode); mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER; drm_mode_set_name(mode); diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index a9d4e0ab049a..10845f39124a 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -175,11 +175,13 @@ void radeon_rmx_mode_fixup(struct drm_encoder *encoder, if (mode->hdisplay < native_mode->hdisplay || mode->vdisplay < native_mode->vdisplay) { + int mode_id = adjusted_mode->base.id; *adjusted_mode = *native_mode; if (!ASIC_IS_AVIVO(rdev)) { adjusted_mode->hdisplay = mode->hdisplay; adjusted_mode->vdisplay = mode->vdisplay; } + adjusted_mode->base.id = mode_id; } } From 9216d44dc13b5e858253f06d83ceea25a9b72f4f Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Sat, 10 Oct 2009 15:20:55 +0800 Subject: [PATCH 017/743] drm/i915: disable FBC for Pineview, fixing a boot hang. Pineview doesn't have this FBC mechanism, so this code doesn't apply. Signed-off-by: Shaohua Li Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 3 +-- drivers/gpu/drm/i915/i915_drv.h | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 92aeb918e0c0..e5b138be45fa 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1227,8 +1227,7 @@ static int i915_load_modeset_init(struct drm_device *dev, goto out; /* Try to set up FBC with a reasonable compressed buffer size */ - if (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_I965G(dev) || IS_GM45(dev)) && - i915_powersave) { + if (I915_HAS_FBC(dev) && i915_powersave) { int cfb_size; /* Try to get an 8M buffer... */ diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 6035d3dae851..0094f185e17d 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -981,7 +981,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IGDNG(dev)) #define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IGDNG(dev)) -#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_I965G(dev))) +#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_GM45(dev)) && !IS_IGD(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) From a3e17eb8f4080a79738a938abe718be255247a44 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Sat, 10 Oct 2009 10:42:37 +0800 Subject: [PATCH 018/743] drm/i915: Set the LVDS_BORDER when using LVDS scaling mode According to the spec the LVDS_BORDER_ENABLE bit decides whether the border data should be included in the active display and data sent to the panel. Border should be used when in VGA centered (un-scaled) mode or when scaling a 4:3 source image to a wide screen panel (typical 16:9). So when the LVDS scaling is used, decide whether the LVDS_BORDER should be enabled or not according to the current scaling mode. At the same time fix the typo error in LVDS center scaling mode. https://bugs.freedesktop.org/show_bug.cgi?id=23789 Signed-off-by: Zhao Yakui tested-by: Zhao Jian Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 2 ++ drivers/gpu/drm/i915/i915_reg.h | 2 ++ drivers/gpu/drm/i915/intel_display.c | 2 ++ drivers/gpu/drm/i915/intel_lvds.c | 10 +++++++++- 4 files changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 0094f185e17d..17be01e351b3 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -492,6 +492,8 @@ typedef struct drm_i915_private { struct drm_i915_gem_phys_object *phys_objs[I915_MAX_PHYS_OBJECT]; } mm; struct sdvo_device_mapping sdvo_mappings[2]; + /* indicate whether the LVDS_BORDER should be enabled or not */ + unsigned int lvds_border_bits; /* Reclocking support */ bool render_reclock_avail; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 0466ddbeba32..5f9272459b71 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -968,6 +968,8 @@ #define LVDS_PORT_EN (1 << 31) /* Selects pipe B for LVDS data. Must be set on pre-965. */ #define LVDS_PIPEB_SELECT (1 << 30) +/* Enable border for unscaled (or aspect-scaled) display */ +#define LVDS_BORDER_ENABLE (1 << 15) /* * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per * pixel. diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3c14240cc002..9efe11761be3 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2936,6 +2936,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, lvds = I915_READ(lvds_reg); lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT; + /* set the corresponsding LVDS_BORDER bit */ + lvds |= dev_priv->lvds_border_bits; /* Set the B0-B3 data pairs corresponding to whether we're going to * set the DPLLs for dual-channel mode or not. */ diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 98ae3d73577e..089f18c66ddb 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -380,7 +380,7 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, adjusted_mode->crtc_vblank_start + vsync_pos; /* keep the vsync width constant */ adjusted_mode->crtc_vsync_end = - adjusted_mode->crtc_vblank_start + vsync_width; + adjusted_mode->crtc_vsync_start + vsync_width; border = 1; break; case DRM_MODE_SCALE_ASPECT: @@ -525,6 +525,14 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, out: lvds_priv->pfit_control = pfit_control; lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios; + /* + * When there exists the border, it means that the LVDS_BORDR + * should be enabled. + */ + if (border) + dev_priv->lvds_border_bits |= LVDS_BORDER_ENABLE; + else + dev_priv->lvds_border_bits &= ~(LVDS_BORDER_ENABLE); /* * XXX: It would be nice to support lower refresh rates on the * panels to reduce power consumption, and perhaps match the From 06027f9111b9f3244ddc40752428f7847b0b867e Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 5 Oct 2009 13:47:26 -0700 Subject: [PATCH 019/743] drm/i915: Save and restore the GM45 FBC regs on suspend and resume. This hasn't fixed the regressions we were testing against, but clearly should be required. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_suspend.c | 26 ++++++++++++++++++-------- 2 files changed, 19 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 17be01e351b3..1254c4b80e30 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -342,6 +342,7 @@ typedef struct drm_i915_private { u32 savePFIT_CONTROL; u32 save_palette_a[256]; u32 save_palette_b[256]; + u32 saveDPFC_CB_BASE; u32 saveFBC_CFB_BASE; u32 saveFBC_LL_BASE; u32 saveFBC_CONTROL; diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index bd6d8d91ca9f..660c5f36424b 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -437,10 +437,14 @@ void i915_save_display(struct drm_device *dev) /* FIXME: save TV & SDVO state */ /* FBC state */ - dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE); - dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE); - dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2); - dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL); + if (IS_GM45(dev)) { + dev_priv->saveDPFC_CB_BASE = I915_READ(DPFC_CB_BASE); + } else { + dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE); + dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE); + dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2); + dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL); + } /* VGA state */ dev_priv->saveVGA0 = I915_READ(VGA0); @@ -511,10 +515,16 @@ void i915_restore_display(struct drm_device *dev) /* FIXME: restore TV & SDVO state */ /* FBC info */ - I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE); - I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE); - I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2); - I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL); + if (IS_GM45(dev)) { + g4x_disable_fbc(dev); + I915_WRITE(DPFC_CB_BASE, dev_priv->saveDPFC_CB_BASE); + } else { + i8xx_disable_fbc(dev); + I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE); + I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE); + I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2); + I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL); + } /* VGA state */ I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); From 181a5336d6cc836f05507410d66988c483ad0154 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Tue, 13 Oct 2009 10:40:52 -0700 Subject: [PATCH 020/743] drm/i915: Fix render reclock availability detection. If the device didn't support EDP, we would bail out too soon. Signed-off-by: Andy Lutomirski [anholt: Pulled this patch out of the patch for adding quirks to enable reclocking.] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_bios.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 4337414846b6..96cd256e60e6 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -351,20 +351,18 @@ parse_driver_features(struct drm_i915_private *dev_priv, struct drm_device *dev = dev_priv->dev; struct bdb_driver_features *driver; - /* set default for chips without eDP */ - if (!SUPPORTS_EDP(dev)) { - dev_priv->edp_support = 0; - return; - } - driver = find_section(bdb, BDB_DRIVER_FEATURES); if (!driver) return; - if (driver->lvds_config == BDB_DRIVER_FEATURE_EDP) + if (driver && SUPPORTS_EDP(dev) && + driver->lvds_config == BDB_DRIVER_FEATURE_EDP) { dev_priv->edp_support = 1; + } else { + dev_priv->edp_support = 0; + } - if (driver->dual_frequency) + if (driver && driver->dual_frequency) dev_priv->render_reclock_avail = true; } From c03342fa6d4617a77cb867ee0ec71665d520eb69 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Tue, 29 Sep 2009 11:01:23 +0800 Subject: [PATCH 021/743] drm/i915: disable powersave feature for Ironlake currently Until we figure out the right setting for powersave features on Ironlake, disable it for now. Also disable watermark update, which has new registers for it on Ironlake too. Signed-off-by: Zhenyu Wang Reviewed-by: Jesse Barnes [anholt: Resolved against the Pineview FBC changes] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 5 ++++- drivers/gpu/drm/i915/intel_display.c | 11 +++++++++-- 2 files changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 1254c4b80e30..24e154e47225 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -984,7 +984,10 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IGDNG(dev)) #define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IGDNG(dev)) -#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_GM45(dev)) && !IS_IGD(dev)) +#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && \ + (IS_I9XX(dev) || IS_GM45(dev)) && \ + !IS_IGD(dev) && \ + !IS_IGDNG(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 9efe11761be3..be7fada590d4 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2586,6 +2586,9 @@ static void intel_update_watermarks(struct drm_device *dev) unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0; int enabled = 0, pixel_size = 0; + if (!dev_priv->display.update_wm) + return; + /* Get the clock config from both planes */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { intel_crtc = to_intel_crtc(crtc); @@ -4126,7 +4129,9 @@ void intel_init_clock_gating(struct drm_device *dev) * Disable clock gating reported to work incorrectly according to the * specs, but enable as much else as we can. */ - if (IS_G4X(dev)) { + if (IS_IGDNG(dev)) { + return; + } else if (IS_G4X(dev)) { uint32_t dspclk_gate; I915_WRITE(RENCLK_GATE_D1, 0); I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE | @@ -4214,7 +4219,9 @@ static void intel_init_display(struct drm_device *dev) i830_get_display_clock_speed; /* For FIFO watermark updates */ - if (IS_G4X(dev)) + if (IS_IGDNG(dev)) + dev_priv->display.update_wm = NULL; + else if (IS_G4X(dev)) dev_priv->display.update_wm = g4x_update_wm; else if (IS_I965G(dev)) dev_priv->display.update_wm = i965_update_wm; From 58a27471d00dc09945cbcfbbc5cbcdcd3c28211d Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 25 Sep 2009 08:01:28 +0000 Subject: [PATCH 022/743] drm/i915: Fix FDI M/N setting according with correct color depth FDI M/N calculation hasn't taken the current pipe color depth into account, but always set as 24bpp. This one checks current pipe color depth setting, and change FDI M/N calculation a little to use bits_per_pixel first, then convert to bytes_per_pixel later. This fixes display corrupt issue on Arrandle LVDS with 1600x900 panel in 18bpp dual-channel mode. Cc: Stable Team Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_reg.h | 5 +++++ drivers/gpu/drm/i915/intel_display.c | 31 ++++++++++++++++++++++++---- 2 files changed, 32 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5f9272459b71..0dd87a7309e6 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1782,6 +1782,11 @@ #define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */ #define PIPE_VBLANK_INTERRUPT_STATUS (1UL<<1) #define PIPE_OVERLAY_UPDATED_STATUS (1UL<<0) +#define PIPE_BPC_MASK (7 << 5) /* Ironlake */ +#define PIPE_8BPC (0 << 5) +#define PIPE_10BPC (1 << 5) +#define PIPE_6BPC (2 << 5) +#define PIPE_12BPC (3 << 5) #define DSPARB 0x70030 #define DSPARB_CSTART_MASK (0x7f << 7) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index be7fada590d4..8278d9d163ad 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2082,7 +2082,7 @@ fdi_reduce_ratio(u32 *num, u32 *den) #define LINK_N 0x80000 static void -igdng_compute_m_n(int bytes_per_pixel, int nlanes, +igdng_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct fdi_m_n *m_n) { @@ -2092,7 +2092,8 @@ igdng_compute_m_n(int bytes_per_pixel, int nlanes, temp = (u64) DATA_N * pixel_clock; temp = div_u64(temp, link_clock); - m_n->gmch_m = div_u64(temp * bytes_per_pixel, nlanes); + m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes); + m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */ m_n->gmch_n = DATA_N; fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); @@ -2766,7 +2767,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* FDI link */ if (IS_IGDNG(dev)) { - int lane, link_bw; + int lane, link_bw, bpp; /* eDP doesn't require FDI link, so just set DP M/N according to current link config */ if (is_edp) { @@ -2785,7 +2786,29 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, lane = 4; link_bw = 270000; } - igdng_compute_m_n(3, lane, target_clock, + + /* determine panel color depth */ + temp = I915_READ(pipeconf_reg); + + switch (temp & PIPE_BPC_MASK) { + case PIPE_8BPC: + bpp = 24; + break; + case PIPE_10BPC: + bpp = 30; + break; + case PIPE_6BPC: + bpp = 18; + break; + case PIPE_12BPC: + bpp = 36; + break; + default: + DRM_ERROR("unknown pipe bpc value\n"); + bpp = 24; + } + + igdng_compute_m_n(bpp, lane, target_clock, link_bw, &m_n); } From 8c2a6d730400e14bf28ccfa11b9bbf453db775ec Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 14 Oct 2009 02:00:42 -0400 Subject: [PATCH 023/743] drm/radeon/kms: move active_device setup into encoder fixup() radeon_encoder->active_device defines the active routing between the encoder and connector. The encoder fixup and dpms functions need to know the active_device to function properly. Setting active_device in the prepare hook was too late in some cases. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 19 ++++++------------- .../gpu/drm/radeon/radeon_legacy_encoders.c | 17 ++++++++--------- 2 files changed, 14 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 10845f39124a..6cdef27be99d 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -194,6 +194,8 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); if (radeon_encoder->rmx_type != RMX_OFF) @@ -860,16 +862,9 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode) DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION args; int index = 0; bool is_dig = false; - int devices; memset(&args, 0, sizeof(args)); - /* on DPMS off we have no idea if active device is meaningful */ - if (mode != DRM_MODE_DPMS_ON && !radeon_encoder->active_device) - devices = radeon_encoder->devices; - else - devices = radeon_encoder->active_device; - DRM_DEBUG("encoder dpms %d to mode %d, devices %08x, active_devices %08x\n", radeon_encoder->encoder_id, mode, radeon_encoder->devices, radeon_encoder->active_device); @@ -900,18 +895,18 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode) break; case ENCODER_OBJECT_ID_INTERNAL_DAC1: case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1: - if (devices & (ATOM_DEVICE_TV_SUPPORT)) + if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl); - else if (devices & (ATOM_DEVICE_CV_SUPPORT)) + else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT)) index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl); else index = GetIndexIntoMasterTable(COMMAND, DAC1OutputControl); break; case ENCODER_OBJECT_ID_INTERNAL_DAC2: case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2: - if (devices & (ATOM_DEVICE_TV_SUPPORT)) + if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl); - else if (devices & (ATOM_DEVICE_CV_SUPPORT)) + else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT)) index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl); else index = GetIndexIntoMasterTable(COMMAND, DAC2OutputControl); @@ -1254,8 +1249,6 @@ static void radeon_atom_encoder_prepare(struct drm_encoder *encoder) { radeon_atom_output_lock(encoder, true); radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF); - - radeon_encoder_set_active_device(encoder); } static void radeon_atom_encoder_commit(struct drm_encoder *encoder) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 6ceb958fd194..3a75b5b6009b 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -107,8 +107,6 @@ static void radeon_legacy_lvds_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_lvds_dpms(encoder, DRM_MODE_DPMS_OFF); - - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_lvds_commit(struct drm_encoder *encoder) @@ -192,6 +190,8 @@ static bool radeon_legacy_lvds_mode_fixup(struct drm_encoder *encoder, { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); if (radeon_encoder->rmx_type != RMX_OFF) @@ -218,7 +218,8 @@ static bool radeon_legacy_primary_dac_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); return true; @@ -272,7 +273,6 @@ static void radeon_legacy_primary_dac_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_primary_dac_dpms(encoder, DRM_MODE_DPMS_OFF); - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_primary_dac_commit(struct drm_encoder *encoder) @@ -468,7 +468,6 @@ static void radeon_legacy_tmds_int_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_tmds_int_dpms(encoder, DRM_MODE_DPMS_OFF); - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_tmds_int_commit(struct drm_encoder *encoder) @@ -593,7 +592,8 @@ static bool radeon_legacy_tmds_ext_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); return true; @@ -636,7 +636,6 @@ static void radeon_legacy_tmds_ext_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_tmds_ext_dpms(encoder, DRM_MODE_DPMS_OFF); - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_tmds_ext_commit(struct drm_encoder *encoder) @@ -735,7 +734,8 @@ static bool radeon_legacy_tv_dac_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); return true; @@ -839,7 +839,6 @@ static void radeon_legacy_tv_dac_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_tv_dac_dpms(encoder, DRM_MODE_DPMS_OFF); - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_tv_dac_commit(struct drm_encoder *encoder) From 1b4d7d75ccff38008ccd40f8e2d74e33a087caaa Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 01:33:35 -0400 Subject: [PATCH 024/743] drm/radeon/kms: fix internal tmds setup on legacy display engine - crtc 0 routing was wrong - need to clear various timing bits in FP_GEN_CNTL - need to set FP_H/V2_SYNC_STRT_WID regs for crtc 1 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 3 +++ drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 10 +++++++++- 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index d22a195cf152..8d0b7aa87fa4 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -668,6 +668,9 @@ static bool radeon_set_crtc_timing(struct drm_crtc *crtc, struct drm_display_mod WREG32(RADEON_DISP2_MERGE_CNTL, disp2_merge_cntl); WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); + + WREG32(RADEON_FP_H2_SYNC_STRT_WID, crtc_h_sync_strt_wid); + WREG32(RADEON_FP_V2_SYNC_STRT_WID, crtc_v_sync_strt_wid); } else { uint32_t crtc_gen_cntl; uint32_t crtc_ext_cntl; diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 3a75b5b6009b..00382122869b 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -542,6 +542,14 @@ static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder, fp_gen_cntl &= ~(RADEON_FP_FPON | RADEON_FP_TMDS_EN); + fp_gen_cntl &= ~(RADEON_FP_RMX_HVSYNC_CONTROL_EN | + RADEON_FP_DFP_SYNC_SEL | + RADEON_FP_CRT_SYNC_SEL | + RADEON_FP_CRTC_LOCK_8DOT | + RADEON_FP_USE_SHADOW_EN | + RADEON_FP_CRTC_USE_SHADOW_VEND | + RADEON_FP_CRT_SYNC_ALT); + if (1) /* FIXME rgbBits == 8 */ fp_gen_cntl |= RADEON_FP_PANEL_FORMAT; /* 24 bit format */ else @@ -555,7 +563,7 @@ static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder, else fp_gen_cntl |= R200_FP_SOURCE_SEL_CRTC1; } else - fp_gen_cntl |= RADEON_FP_SEL_CRTC1; + fp_gen_cntl &= ~RADEON_FP_SEL_CRTC2; } else { if (ASIC_IS_R300(rdev) || rdev->family == CHIP_R200) { fp_gen_cntl &= ~R200_FP_SOURCE_SEL_MASK; From 0eb96d6ed38430b72897adde58f5477a6b71757a Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 14 Oct 2009 12:33:41 -0700 Subject: [PATCH 025/743] drm/i915: save/restore BLC histogram control reg across suspend/resume Turns out some machines, like the ThinkPad X40 don't come back if you don't save/restore this register. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_reg.h | 2 ++ drivers/gpu/drm/i915/i915_suspend.c | 2 ++ 3 files changed, 5 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 24e154e47225..f6a3587ad065 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -304,6 +304,7 @@ typedef struct drm_i915_private { u32 saveDSPASURF; u32 saveDSPATILEOFF; u32 savePFIT_PGM_RATIOS; + u32 saveBLC_HIST_CTL; u32 saveBLC_PWM_CTL; u32 saveBLC_PWM_CTL2; u32 saveFPB0; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 0dd87a7309e6..b4813586d92c 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1080,6 +1080,8 @@ #define BACKLIGHT_DUTY_CYCLE_SHIFT (0) #define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) +#define BLC_HIST_CTL 0x61260 + /* TV port control */ #define TV_CTL 0x68000 /** Enables the TV encoder */ diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 660c5f36424b..75c5bed48be0 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -410,6 +410,7 @@ void i915_save_display(struct drm_device *dev) dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL); dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS); dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); + dev_priv->saveBLC_HIST_CTL = I915_READ(BLC_HIST_CTL); if (IS_I965G(dev)) dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2); if (IS_MOBILE(dev) && !IS_I830(dev)) @@ -501,6 +502,7 @@ void i915_restore_display(struct drm_device *dev) I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS); I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); + I915_WRITE(BLC_HIST_CTL, dev_priv->saveBLC_HIST_CTL); I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS); I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS); I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); From 0d9c778978ff268228c095ae737c282c03a5986d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 14 Oct 2009 20:12:46 +0100 Subject: [PATCH 026/743] drm/i915: Install a fence register for fbc on g4x To enable framebuffer compression on a g4x, we not only need the buffer to tiled (X only), we also need to hold a fence register for the buffer. Currently we only install a fence register for pre-i965s when setting up the scanout buffer. Rather than adding some convoluted logic to g4x_enable_fbc() to acquire a fence register, and perhaps to g4x_disable_fbc() to release it again, we can extend the acquisition during setup to all chipsets. Signed-off-by: Chris Wilson Cc: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 8278d9d163ad..123cce1ae470 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1260,9 +1260,11 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, return ret; } - /* Pre-i965 needs to install a fence for tiled scan-out */ - if (!IS_I965G(dev) && - obj_priv->fence_reg == I915_FENCE_REG_NONE && + /* Install a fence for tiled scan-out. Pre-i965 always needs a fence, + * whereas 965+ only requires a fence if using framebuffer compression. + * For simplicity, we always install a fence as the cost is not that onerous. + */ + if (obj_priv->fence_reg == I915_FENCE_REG_NONE && obj_priv->tiling_mode != I915_TILING_NONE) { ret = i915_gem_object_get_fence_reg(obj); if (ret != 0) { From 1456edbb1476db735715ddcc7ac306de587024eb Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Thu, 15 Oct 2009 11:03:20 -0700 Subject: [PATCH 027/743] kconfig: Make zconf.y work with current bison zconf.y includes zconf.hash.c from the initial code section. zconf.hash.c references the token constants from zconf.y. However, current bison defines the token constants after the initial code section, making zconf.hash.c fail to compile. Move the include of zconf.hash.c later in zconf.y, so bison puts it after the token constants. Signed-off-by: Josh Triplett --- scripts/kconfig/zconf.tab.c_shipped | 409 +++++++++++++--------------- scripts/kconfig/zconf.y | 7 +- 2 files changed, 192 insertions(+), 224 deletions(-) diff --git a/scripts/kconfig/zconf.tab.c_shipped b/scripts/kconfig/zconf.tab.c_shipped index 95df833b5a9d..c42b439c5cc0 100644 --- a/scripts/kconfig/zconf.tab.c_shipped +++ b/scripts/kconfig/zconf.tab.c_shipped @@ -1,24 +1,23 @@ -/* A Bison parser, made by GNU Bison 2.3. */ + +/* A Bison parser, made by GNU Bison 2.4.1. */ /* Skeleton implementation for Bison's Yacc-like parsers in C - - Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify + + This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, - Boston, MA 02110-1301, USA. */ + along with this program. If not, see . */ /* As a special exception, you may create a larger work that contains part or all of the Bison parser skeleton and distribute that work @@ -29,7 +28,7 @@ special exception, which will cause the skeleton and the resulting Bison output files to be licensed under the GNU General Public License without this special exception. - + This special exception was added by the Free Software Foundation in version 2.2 of Bison. */ @@ -47,7 +46,7 @@ #define YYBISON 1 /* Bison version. */ -#define YYBISON_VERSION "2.3" +#define YYBISON_VERSION "2.4.1" /* Skeleton name. */ #define YYSKELETON_NAME "yacc.c" @@ -55,17 +54,84 @@ /* Pure parsers. */ #define YYPURE 0 +/* Push parsers. */ +#define YYPUSH 0 + +/* Pull parsers. */ +#define YYPULL 1 + /* Using locations. */ #define YYLSP_NEEDED 0 /* Substitute the variable and function names. */ -#define yyparse zconfparse -#define yylex zconflex -#define yyerror zconferror -#define yylval zconflval -#define yychar zconfchar -#define yydebug zconfdebug -#define yynerrs zconfnerrs +#define yyparse zconfparse +#define yylex zconflex +#define yyerror zconferror +#define yylval zconflval +#define yychar zconfchar +#define yydebug zconfdebug +#define yynerrs zconfnerrs + + +/* Copy the first part of user declarations. */ + + +/* + * Copyright (C) 2002 Roman Zippel + * Released under the terms of the GNU GPL v2.0. + */ + +#include +#include +#include +#include +#include +#include + +#define LKC_DIRECT_LINK +#include "lkc.h" + +#define printd(mask, fmt...) if (cdebug & (mask)) printf(fmt) + +#define PRINTD 0x0001 +#define DEBUG_PARSE 0x0002 + +int cdebug = PRINTD; + +extern int zconflex(void); +static void zconfprint(const char *err, ...); +static void zconf_error(const char *err, ...); +static void zconferror(const char *err); +static bool zconf_endtoken(struct kconf_id *id, int starttoken, int endtoken); + +struct symbol *symbol_hash[257]; + +static struct menu *current_menu, *current_entry; + +#define YYDEBUG 0 +#if YYDEBUG +#define YYERROR_VERBOSE +#endif + + + +/* Enabling traces. */ +#ifndef YYDEBUG +# define YYDEBUG 0 +#endif + +/* Enabling verbose error messages. */ +#ifdef YYERROR_VERBOSE +# undef YYERROR_VERBOSE +# define YYERROR_VERBOSE 1 +#else +# define YYERROR_VERBOSE 0 +#endif + +/* Enabling the token table. */ +#ifndef YYTOKEN_TABLE +# define YYTOKEN_TABLE 0 +#endif /* Tokens. */ @@ -108,129 +174,36 @@ T_NOT = 289 }; #endif -/* Tokens. */ -#define T_MAINMENU 258 -#define T_MENU 259 -#define T_ENDMENU 260 -#define T_SOURCE 261 -#define T_CHOICE 262 -#define T_ENDCHOICE 263 -#define T_COMMENT 264 -#define T_CONFIG 265 -#define T_MENUCONFIG 266 -#define T_HELP 267 -#define T_HELPTEXT 268 -#define T_IF 269 -#define T_ENDIF 270 -#define T_DEPENDS 271 -#define T_OPTIONAL 272 -#define T_PROMPT 273 -#define T_TYPE 274 -#define T_DEFAULT 275 -#define T_SELECT 276 -#define T_RANGE 277 -#define T_OPTION 278 -#define T_ON 279 -#define T_WORD 280 -#define T_WORD_QUOTE 281 -#define T_UNEQUAL 282 -#define T_CLOSE_PAREN 283 -#define T_OPEN_PAREN 284 -#define T_EOL 285 -#define T_OR 286 -#define T_AND 287 -#define T_EQUAL 288 -#define T_NOT 289 - -/* Copy the first part of user declarations. */ - - -/* - * Copyright (C) 2002 Roman Zippel - * Released under the terms of the GNU GPL v2.0. - */ - -#include -#include -#include -#include -#include -#include - -#define LKC_DIRECT_LINK -#include "lkc.h" - -#include "zconf.hash.c" - -#define printd(mask, fmt...) if (cdebug & (mask)) printf(fmt) - -#define PRINTD 0x0001 -#define DEBUG_PARSE 0x0002 - -int cdebug = PRINTD; - -extern int zconflex(void); -static void zconfprint(const char *err, ...); -static void zconf_error(const char *err, ...); -static void zconferror(const char *err); -static bool zconf_endtoken(struct kconf_id *id, int starttoken, int endtoken); - -struct symbol *symbol_hash[257]; - -static struct menu *current_menu, *current_entry; - -#define YYDEBUG 0 -#if YYDEBUG -#define YYERROR_VERBOSE -#endif - - -/* Enabling traces. */ -#ifndef YYDEBUG -# define YYDEBUG 0 -#endif - -/* Enabling verbose error messages. */ -#ifdef YYERROR_VERBOSE -# undef YYERROR_VERBOSE -# define YYERROR_VERBOSE 1 -#else -# define YYERROR_VERBOSE 0 -#endif - -/* Enabling the token table. */ -#ifndef YYTOKEN_TABLE -# define YYTOKEN_TABLE 0 -#endif - #if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED typedef union YYSTYPE - { + + char *string; struct file *file; struct symbol *symbol; struct expr *expr; struct menu *menu; struct kconf_id *id; -} -/* Line 187 of yacc.c. */ - YYSTYPE; + + +} YYSTYPE; +# define YYSTYPE_IS_TRIVIAL 1 # define yystype YYSTYPE /* obsolescent; will be withdrawn */ # define YYSTYPE_IS_DECLARED 1 -# define YYSTYPE_IS_TRIVIAL 1 #endif - /* Copy the second part of user declarations. */ -/* Line 216 of yacc.c. */ +/* Include zconf.hash.c here so it can see the token constants. */ +#include "zconf.hash.c" + #ifdef short @@ -306,14 +279,14 @@ typedef short int yytype_int16; #if (defined __STDC__ || defined __C99__FUNC__ \ || defined __cplusplus || defined _MSC_VER) static int -YYID (int i) +YYID (int yyi) #else static int -YYID (i) - int i; +YYID (yyi) + int yyi; #endif { - return i; + return yyi; } #endif @@ -394,9 +367,9 @@ void free (void *); /* INFRINGES ON USER NAME SPACE */ /* A type that is properly aligned for any stack member. */ union yyalloc { - yytype_int16 yyss; - YYSTYPE yyvs; - }; + yytype_int16 yyss_alloc; + YYSTYPE yyvs_alloc; +}; /* The size of the maximum gap between one aligned stack and the next. */ # define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) @@ -430,12 +403,12 @@ union yyalloc elements in the stack, and YYPTR gives the new location of the stack. Advance YYPTR to a properly aligned location for the next stack. */ -# define YYSTACK_RELOCATE(Stack) \ +# define YYSTACK_RELOCATE(Stack_alloc, Stack) \ do \ { \ YYSIZE_T yynewbytes; \ - YYCOPY (&yyptr->Stack, Stack, yysize); \ - Stack = &yyptr->Stack; \ + YYCOPY (&yyptr->Stack_alloc, Stack, yysize); \ + Stack = &yyptr->Stack_alloc; \ yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ yyptr += yynewbytes / sizeof (*yyptr); \ } \ @@ -558,18 +531,18 @@ static const yytype_int8 yyrhs[] = /* YYRLINE[YYN] -- source line where rule number YYN was defined. */ static const yytype_uint16 yyrline[] = { - 0, 104, 104, 106, 108, 109, 110, 111, 112, 113, - 114, 118, 122, 122, 122, 122, 122, 122, 122, 126, - 127, 128, 129, 130, 131, 135, 136, 142, 150, 156, - 164, 174, 176, 177, 178, 179, 180, 181, 184, 192, - 198, 208, 214, 220, 223, 225, 236, 237, 242, 251, - 256, 264, 267, 269, 270, 271, 272, 273, 276, 282, - 293, 299, 309, 311, 316, 324, 332, 335, 337, 338, - 339, 344, 351, 356, 364, 367, 369, 370, 371, 374, - 382, 389, 396, 402, 409, 411, 412, 413, 416, 424, - 426, 431, 432, 435, 436, 437, 441, 442, 445, 446, - 449, 450, 451, 452, 453, 454, 455, 458, 459, 462, - 463 + 0, 107, 107, 109, 111, 112, 113, 114, 115, 116, + 117, 121, 125, 125, 125, 125, 125, 125, 125, 129, + 130, 131, 132, 133, 134, 138, 139, 145, 153, 159, + 167, 177, 179, 180, 181, 182, 183, 184, 187, 195, + 201, 211, 217, 223, 226, 228, 239, 240, 245, 254, + 259, 267, 270, 272, 273, 274, 275, 276, 279, 285, + 296, 302, 312, 314, 319, 327, 335, 338, 340, 341, + 342, 347, 354, 359, 367, 370, 372, 373, 374, 377, + 385, 392, 399, 405, 412, 414, 415, 416, 419, 427, + 429, 434, 435, 438, 439, 440, 444, 445, 448, 449, + 452, 453, 454, 455, 456, 457, 458, 461, 462, 465, + 466 }; #endif @@ -985,17 +958,20 @@ yy_symbol_print (yyoutput, yytype, yyvaluep) #if (defined __STDC__ || defined __C99__FUNC__ \ || defined __cplusplus || defined _MSC_VER) static void -yy_stack_print (yytype_int16 *bottom, yytype_int16 *top) +yy_stack_print (yytype_int16 *yybottom, yytype_int16 *yytop) #else static void -yy_stack_print (bottom, top) - yytype_int16 *bottom; - yytype_int16 *top; +yy_stack_print (yybottom, yytop) + yytype_int16 *yybottom; + yytype_int16 *yytop; #endif { YYFPRINTF (stderr, "Stack now"); - for (; bottom <= top; ++bottom) - YYFPRINTF (stderr, " %d", *bottom); + for (; yybottom <= yytop; yybottom++) + { + int yybot = *yybottom; + YYFPRINTF (stderr, " %d", yybot); + } YYFPRINTF (stderr, "\n"); } @@ -1029,11 +1005,11 @@ yy_reduce_print (yyvsp, yyrule) /* The symbols being reduced. */ for (yyi = 0; yyi < yynrhs; yyi++) { - fprintf (stderr, " $%d = ", yyi + 1); + YYFPRINTF (stderr, " $%d = ", yyi + 1); yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], &(yyvsp[(yyi + 1) - (yynrhs)]) ); - fprintf (stderr, "\n"); + YYFPRINTF (stderr, "\n"); } } @@ -1343,10 +1319,8 @@ yydestruct (yymsg, yytype, yyvaluep) break; } } - /* Prevent warnings from -Wmissing-prototypes. */ - #ifdef YYPARSE_PARAM #if defined __STDC__ || defined __cplusplus int yyparse (void *YYPARSE_PARAM); @@ -1362,11 +1336,10 @@ int yyparse (); #endif /* ! YYPARSE_PARAM */ - -/* The look-ahead symbol. */ +/* The lookahead symbol. */ int yychar; -/* The semantic value of the look-ahead symbol. */ +/* The semantic value of the lookahead symbol. */ YYSTYPE yylval; /* Number of syntax errors so far. */ @@ -1374,9 +1347,9 @@ int yynerrs; -/*----------. -| yyparse. | -`----------*/ +/*-------------------------. +| yyparse or yypush_parse. | +`-------------------------*/ #ifdef YYPARSE_PARAM #if (defined __STDC__ || defined __C99__FUNC__ \ @@ -1400,14 +1373,39 @@ yyparse () #endif #endif { - - int yystate; + + + int yystate; + /* Number of tokens to shift before error messages enabled. */ + int yyerrstatus; + + /* The stacks and their tools: + `yyss': related to states. + `yyvs': related to semantic values. + + Refer to the stacks thru separate pointers, to allow yyoverflow + to reallocate them elsewhere. */ + + /* The state stack. */ + yytype_int16 yyssa[YYINITDEPTH]; + yytype_int16 *yyss; + yytype_int16 *yyssp; + + /* The semantic value stack. */ + YYSTYPE yyvsa[YYINITDEPTH]; + YYSTYPE *yyvs; + YYSTYPE *yyvsp; + + YYSIZE_T yystacksize; + int yyn; int yyresult; - /* Number of tokens to shift before error messages enabled. */ - int yyerrstatus; - /* Look-ahead token as an internal (translated) token number. */ - int yytoken = 0; + /* Lookahead token as an internal (translated) token number. */ + int yytoken; + /* The variables used to return semantic value and location from the + action routines. */ + YYSTYPE yyval; + #if YYERROR_VERBOSE /* Buffer for error messages, and its allocated size. */ char yymsgbuf[128]; @@ -1415,51 +1413,28 @@ yyparse () YYSIZE_T yymsg_alloc = sizeof yymsgbuf; #endif - /* Three stacks and their tools: - `yyss': related to states, - `yyvs': related to semantic values, - `yyls': related to locations. - - Refer to the stacks thru separate pointers, to allow yyoverflow - to reallocate them elsewhere. */ - - /* The state stack. */ - yytype_int16 yyssa[YYINITDEPTH]; - yytype_int16 *yyss = yyssa; - yytype_int16 *yyssp; - - /* The semantic value stack. */ - YYSTYPE yyvsa[YYINITDEPTH]; - YYSTYPE *yyvs = yyvsa; - YYSTYPE *yyvsp; - - - #define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N)) - YYSIZE_T yystacksize = YYINITDEPTH; - - /* The variables used to return semantic value and location from the - action routines. */ - YYSTYPE yyval; - - /* The number of symbols on the RHS of the reduced rule. Keep to zero when no symbol should be popped. */ int yylen = 0; + yytoken = 0; + yyss = yyssa; + yyvs = yyvsa; + yystacksize = YYINITDEPTH; + YYDPRINTF ((stderr, "Starting parse\n")); yystate = 0; yyerrstatus = 0; yynerrs = 0; - yychar = YYEMPTY; /* Cause a token to be read. */ + yychar = YYEMPTY; /* Cause a token to be read. */ /* Initialize stack pointers. Waste one element of value and location stack so that they stay on the same level as the state stack. The wasted elements are never initialized. */ - yyssp = yyss; yyvsp = yyvs; @@ -1489,7 +1464,6 @@ yyparse () YYSTYPE *yyvs1 = yyvs; yytype_int16 *yyss1 = yyss; - /* Each stack pointer address is followed by the size of the data in use in that stack, in bytes. This used to be a conditional around just the two extra args, but that might @@ -1497,7 +1471,6 @@ yyparse () yyoverflow (YY_("memory exhausted"), &yyss1, yysize * sizeof (*yyssp), &yyvs1, yysize * sizeof (*yyvsp), - &yystacksize); yyss = yyss1; @@ -1520,9 +1493,8 @@ yyparse () (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); if (! yyptr) goto yyexhaustedlab; - YYSTACK_RELOCATE (yyss); - YYSTACK_RELOCATE (yyvs); - + YYSTACK_RELOCATE (yyss_alloc, yyss); + YYSTACK_RELOCATE (yyvs_alloc, yyvs); # undef YYSTACK_RELOCATE if (yyss1 != yyssa) YYSTACK_FREE (yyss1); @@ -1533,7 +1505,6 @@ yyparse () yyssp = yyss + yysize - 1; yyvsp = yyvs + yysize - 1; - YYDPRINTF ((stderr, "Stack size increased to %lu\n", (unsigned long int) yystacksize)); @@ -1543,6 +1514,9 @@ yyparse () YYDPRINTF ((stderr, "Entering state %d\n", yystate)); + if (yystate == YYFINAL) + YYACCEPT; + goto yybackup; /*-----------. @@ -1551,16 +1525,16 @@ yyparse () yybackup: /* Do appropriate processing given the current state. Read a - look-ahead token if we need one and don't already have one. */ + lookahead token if we need one and don't already have one. */ - /* First try to decide what to do without reference to look-ahead token. */ + /* First try to decide what to do without reference to lookahead token. */ yyn = yypact[yystate]; if (yyn == YYPACT_NINF) goto yydefault; - /* Not known => get a look-ahead token if don't already have one. */ + /* Not known => get a lookahead token if don't already have one. */ - /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */ + /* YYCHAR is either YYEMPTY or YYEOF or a valid lookahead symbol. */ if (yychar == YYEMPTY) { YYDPRINTF ((stderr, "Reading a token: ")); @@ -1592,20 +1566,16 @@ yybackup: goto yyreduce; } - if (yyn == YYFINAL) - YYACCEPT; - /* Count tokens shifted since error; after three, turn off error status. */ if (yyerrstatus) yyerrstatus--; - /* Shift the look-ahead token. */ + /* Shift the lookahead token. */ YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); - /* Discard the shifted token unless it is eof. */ - if (yychar != YYEOF) - yychar = YYEMPTY; + /* Discard the shifted token. */ + yychar = YYEMPTY; yystate = yyn; *++yyvsp = yylval; @@ -2029,7 +1999,6 @@ yyreduce: break; -/* Line 1267 of yacc.c. */ default: break; } @@ -2041,7 +2010,6 @@ yyreduce: *++yyvsp = yyval; - /* Now `shift' the result of the reduction. Determine what state that goes to, based on the state we popped back to and the rule number reduced by. */ @@ -2106,7 +2074,7 @@ yyerrlab: if (yyerrstatus == 3) { - /* If just tried and failed to reuse look-ahead token after an + /* If just tried and failed to reuse lookahead token after an error, discard it. */ if (yychar <= YYEOF) @@ -2123,7 +2091,7 @@ yyerrlab: } } - /* Else will try to reuse look-ahead token after shifting the error + /* Else will try to reuse lookahead token after shifting the error token. */ goto yyerrlab1; @@ -2180,9 +2148,6 @@ yyerrlab1: YY_STACK_PRINT (yyss, yyssp); } - if (yyn == YYFINAL) - YYACCEPT; - *++yyvsp = yylval; @@ -2207,7 +2172,7 @@ yyabortlab: yyresult = 1; goto yyreturn; -#ifndef yyoverflow +#if !defined(yyoverflow) || YYERROR_VERBOSE /*-------------------------------------------------. | yyexhaustedlab -- memory exhaustion comes here. | `-------------------------------------------------*/ @@ -2218,7 +2183,7 @@ yyexhaustedlab: #endif yyreturn: - if (yychar != YYEOF && yychar != YYEMPTY) + if (yychar != YYEMPTY) yydestruct ("Cleanup: discarding lookahead", yytoken, &yylval); /* Do not reclaim the symbols of the rule which action triggered diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y index 9710b82466f2..01ec550ec01b 100644 --- a/scripts/kconfig/zconf.y +++ b/scripts/kconfig/zconf.y @@ -14,8 +14,6 @@ #define LKC_DIRECT_LINK #include "lkc.h" -#include "zconf.hash.c" - #define printd(mask, fmt...) if (cdebug & (mask)) printf(fmt) #define PRINTD 0x0001 @@ -100,6 +98,11 @@ static struct menu *current_menu, *current_entry; menu_end_menu(); } if_entry menu_entry choice_entry +%{ +/* Include zconf.hash.c here so it can see the token constants. */ +#include "zconf.hash.c" +%} + %% input: stmt_list; From 0294cf4f7f895ddcf284b1ce7cf27a2c9d7106f7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 16:16:35 -0400 Subject: [PATCH 028/743] drm/radeon/kms: fix connector edid handling Based partly on a patch from Christian Koenig - fix several memory leaks in radeon_connector->edid handling - store edid in radeon_connector->edid in detect() or get_modes() - switch hdmi detect code to use radeon_connector->edid - add support for oem boards multiple connectors that share a ddc line. - short circuit lvds_detect() if have a stored edid Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 75 ++++++++++++++++++---- drivers/gpu/drm/radeon/radeon_display.c | 18 ++---- drivers/gpu/drm/radeon/radeon_encoders.c | 10 +-- drivers/gpu/drm/radeon/radeon_mode.h | 2 + 4 files changed, 73 insertions(+), 32 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 729207a1e83e..5b6067aa08bd 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -400,7 +400,6 @@ static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connec struct radeon_connector *radeon_connector = to_radeon_connector(connector); struct drm_encoder *encoder = radeon_best_single_encoder(connector); enum drm_connector_status ret = connector_status_disconnected; - bool dret; if (encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); @@ -413,12 +412,17 @@ static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connec } /* check for edid as well */ - if (radeon_connector->ddc_bus) { - radeon_i2c_do_lock(radeon_connector, 1); - dret = radeon_ddc_probe(radeon_connector); - radeon_i2c_do_lock(radeon_connector, 0); - if (dret) - ret = connector_status_connected; + if (radeon_connector->edid) + ret = connector_status_connected; + else { + if (radeon_connector->ddc_bus) { + radeon_i2c_do_lock(radeon_connector, 1); + radeon_connector->edid = drm_get_edid(&radeon_connector->base, + &radeon_connector->ddc_bus->adapter); + radeon_i2c_do_lock(radeon_connector, 0); + if (radeon_connector->edid) + ret = connector_status_connected; + } } /* check acpi lid status ??? */ @@ -432,6 +436,8 @@ static void radeon_connector_destroy(struct drm_connector *connector) if (radeon_connector->ddc_bus) radeon_i2c_destroy(radeon_connector->ddc_bus); + if (radeon_connector->edid) + kfree(radeon_connector->edid); kfree(radeon_connector->con_priv); drm_sysfs_connector_remove(connector); drm_connector_cleanup(connector); @@ -519,9 +525,32 @@ static enum drm_connector_status radeon_vga_detect(struct drm_connector *connect radeon_i2c_do_lock(radeon_connector, 1); dret = radeon_ddc_probe(radeon_connector); radeon_i2c_do_lock(radeon_connector, 0); - if (dret) - ret = connector_status_connected; - else { + if (dret) { + if (radeon_connector->edid) { + kfree(radeon_connector->edid); + radeon_connector->edid = NULL; + } + radeon_i2c_do_lock(radeon_connector, 1); + radeon_connector->edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter); + radeon_i2c_do_lock(radeon_connector, 0); + + if (!radeon_connector->edid) { + DRM_ERROR("DDC responded but not EDID found for %s\n", + drm_get_connector_name(connector)); + } else { + radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL); + + /* some oems have boards with separate digital and analog connectors + * with a shared ddc line (often vga + hdmi) + */ + if (radeon_connector->use_digital && radeon_connector->shared_ddc) { + kfree(radeon_connector->edid); + radeon_connector->edid = NULL; + ret = connector_status_disconnected; + } else + ret = connector_status_connected; + } + } else { if (radeon_connector->dac_load_detect) { encoder_funcs = encoder->helper_private; ret = encoder_funcs->detect(encoder, connector); @@ -649,6 +678,10 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect dret = radeon_ddc_probe(radeon_connector); radeon_i2c_do_lock(radeon_connector, 0); if (dret) { + if (radeon_connector->edid) { + kfree(radeon_connector->edid); + radeon_connector->edid = NULL; + } radeon_i2c_do_lock(radeon_connector, 1); radeon_connector->edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter); radeon_i2c_do_lock(radeon_connector, 0); @@ -659,10 +692,15 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect } else { radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL); - /* if this isn't a digital monitor - then we need to make sure we don't have any - TV conflicts */ - ret = connector_status_connected; + /* some oems have boards with separate digital and analog connectors + * with a shared ddc line (often vga + hdmi) + */ + if ((!radeon_connector->use_digital) && radeon_connector->shared_ddc) { + kfree(radeon_connector->edid); + radeon_connector->edid = NULL; + ret = connector_status_disconnected; + } else + ret = connector_status_connected; } } @@ -787,6 +825,7 @@ radeon_add_atom_connector(struct drm_device *dev, struct radeon_connector *radeon_connector; struct radeon_connector_atom_dig *radeon_dig_connector; uint32_t subpixel_order = SubPixelNone; + bool shared_ddc = false; int ret; /* fixme - tv/cv/din */ @@ -800,6 +839,13 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_connector->devices |= supported_device; return; } + if (radeon_connector->ddc_bus && i2c_bus->valid) { + if (memcmp(&radeon_connector->ddc_bus->rec, i2c_bus, + sizeof(struct radeon_i2c_bus_rec)) == 0) { + radeon_connector->shared_ddc = true; + shared_ddc = true; + } + } } radeon_connector = kzalloc(sizeof(struct radeon_connector), GFP_KERNEL); @@ -810,6 +856,7 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_connector->connector_id = connector_id; radeon_connector->devices = supported_device; + radeon_connector->shared_ddc = shared_ddc; switch (connector_type) { case DRM_MODE_CONNECTOR_VGA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index a20bf43389b3..c85df4afcb7a 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -334,27 +334,19 @@ static bool radeon_setup_enc_conn(struct drm_device *dev) int radeon_ddc_get_modes(struct radeon_connector *radeon_connector) { - struct edid *edid; int ret = 0; if (!radeon_connector->ddc_bus) return -1; if (!radeon_connector->edid) { radeon_i2c_do_lock(radeon_connector, 1); - edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter); + radeon_connector->edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter); radeon_i2c_do_lock(radeon_connector, 0); - } else - edid = radeon_connector->edid; + } - if (edid) { - /* update digital bits here */ - if (edid->input & DRM_EDID_INPUT_DIGITAL) - radeon_connector->use_digital = 1; - else - radeon_connector->use_digital = 0; - drm_mode_connector_update_edid_property(&radeon_connector->base, edid); - ret = drm_add_edid_modes(&radeon_connector->base, edid); - kfree(edid); + if (radeon_connector->edid) { + drm_mode_connector_update_edid_property(&radeon_connector->base, radeon_connector->edid); + ret = drm_add_edid_modes(&radeon_connector->base, radeon_connector->edid); return ret; } drm_mode_connector_update_edid_property(&radeon_connector->base, NULL); diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 6cdef27be99d..b70440e8d179 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -449,7 +449,7 @@ atombios_digital_setup(struct drm_encoder *encoder, int action) case 1: args.v1.ucMisc = 0; args.v1.ucAction = action; - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) args.v1.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE; args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { @@ -474,7 +474,7 @@ atombios_digital_setup(struct drm_encoder *encoder, int action) if (dig->coherent_mode) args.v2.ucMisc |= PANEL_ENCODER_MISC_COHERENT; } - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) args.v2.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE; args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); args.v2.ucTruncate = 0; @@ -532,7 +532,7 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) switch (connector->connector_type) { case DRM_MODE_CONNECTOR_DVII: case DRM_MODE_CONNECTOR_HDMIB: /* HDMI-B is basically DL-DVI; analog works fine */ - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) return ATOM_ENCODER_MODE_HDMI; else if (radeon_connector->use_digital) return ATOM_ENCODER_MODE_DVI; @@ -542,7 +542,7 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) case DRM_MODE_CONNECTOR_DVID: case DRM_MODE_CONNECTOR_HDMIA: default: - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) return ATOM_ENCODER_MODE_HDMI; else return ATOM_ENCODER_MODE_DVI; @@ -554,7 +554,7 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) /*if (radeon_output->MonType == MT_DP) return ATOM_ENCODER_MODE_DP; else*/ - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) return ATOM_ENCODER_MODE_HDMI; else return ATOM_ENCODER_MODE_DVI; diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 3d2631be073c..b6868fbe7346 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -297,6 +297,8 @@ struct radeon_connector { uint32_t connector_id; uint32_t devices; struct radeon_i2c_chan *ddc_bus; + /* some systems have a an hdmi and vga port with a shared ddc line */ + bool shared_ddc; bool use_digital; /* we need to mind the EDID between detect and get modes due to analog/digital/tvencoder */ From ceefedd8e8a80b743fa0b6d6b1992be7029a9efb Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 13 Oct 2009 23:57:47 -0400 Subject: [PATCH 029/743] drm/radeon/kms/atom: fix tv-out D1MODE_INTERLEAVE_EN was getting set in some cases in the encoder quirks function due to the changes in 5a9bcacc0a56f0d9577494e834519480018a6cc3 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 4 ---- drivers/gpu/drm/radeon/radeon_encoders.c | 9 ++++++--- 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 3409aa3cbee4..f7dcb6916837 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -31,10 +31,6 @@ #include "atom.h" #include "atom-bits.h" -/* evil but including atombios.h is much worse */ -bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION *crtc_timing, - int32_t *pixel_clock); static void atombios_overscan_setup(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index b70440e8d179..2aa5994a29d5 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -206,7 +206,7 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, && (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2))) adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2; - if (radeon_encoder->active_device & ATOM_DEVICE_TV_SUPPORT) { + if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) { struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv; if (tv_dac) { if (tv_dac->tv_std == TV_STD_NTSC || @@ -1085,8 +1085,11 @@ atombios_apply_encoder_quirks(struct drm_encoder *encoder, } /* set scaler clears this on some chips */ - if (ASIC_IS_AVIVO(rdev) && (mode->flags & DRM_MODE_FLAG_INTERLACE)) - WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset, AVIVO_D1MODE_INTERLEAVE_EN); + if (!(radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))) { + if (ASIC_IS_AVIVO(rdev) && (mode->flags & DRM_MODE_FLAG_INTERLACE)) + WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset, + AVIVO_D1MODE_INTERLEAVE_EN); + } } static void From dfdd646773941bb6b22c3898a26a109e57c872a2 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 13 Oct 2009 12:48:44 -0400 Subject: [PATCH 030/743] drm/radeon/kms: limit default tv modes to <= 1024x768 fixes fdo bug 24496 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 5b6067aa08bd..ce3a785a633b 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -223,6 +223,11 @@ static void radeon_add_common_modes(struct drm_encoder *encoder, struct drm_conn }; for (i = 0; i < 17; i++) { + if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT)) { + if (common_modes[i].w > 1024 || + common_modes[i].h > 768) + continue; + } if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { if (common_modes[i].w > native_mode->hdisplay || common_modes[i].h > native_mode->vdisplay || From a77f171843d466d4af0d527bcb2d314fafa8afd7 Mon Sep 17 00:00:00 2001 From: Matt Turner Date: Wed, 14 Oct 2009 00:34:41 -0400 Subject: [PATCH 031/743] drm/radeon/kms: use RADEON_GPU_PAGE_SIZE instead of 4096 Signed-off-by: Matt Turner Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 2 +- drivers/gpu/drm/radeon/r300.c | 2 +- drivers/gpu/drm/radeon/r600.c | 10 +++++----- drivers/gpu/drm/radeon/radeon.h | 2 ++ drivers/gpu/drm/radeon/radeon_benchmark.c | 4 ++-- drivers/gpu/drm/radeon/radeon_gart.c | 20 ++++++++++---------- drivers/gpu/drm/radeon/radeon_test.c | 6 +++--- 7 files changed, 24 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 33198dd5706c..c22adff179a9 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -240,7 +240,7 @@ int r100_wb_init(struct radeon_device *rdev) int r; if (rdev->wb.wb_obj == NULL) { - r = radeon_object_create(rdev, NULL, 4096, + r = radeon_object_create(rdev, NULL, RADEON_GPU_PAGE_SIZE, true, RADEON_GEM_DOMAIN_GTT, false, &rdev->wb.wb_obj); diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index e08c4a8974ca..2f43ee8e4048 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -113,7 +113,7 @@ int rv370_pcie_gart_enable(struct radeon_device *rdev) tmp = RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD; WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp); WREG32_PCIE(RADEON_PCIE_TX_GART_START_LO, rdev->mc.gtt_location); - tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 4096; + tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - RADEON_GPU_PAGE_SIZE; WREG32_PCIE(RADEON_PCIE_TX_GART_END_LO, tmp); WREG32_PCIE(RADEON_PCIE_TX_GART_START_HI, 0); WREG32_PCIE(RADEON_PCIE_TX_GART_END_HI, 0); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 6b43a95a5fb2..1b5aa1fd368b 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1269,9 +1269,9 @@ int r600_cp_resume(struct radeon_device *rdev) rb_bufsz = drm_order(rdev->cp.ring_size / 8); #ifdef __BIG_ENDIAN WREG32(CP_RB_CNTL, BUF_SWAP_32BIT | RB_NO_UPDATE | - (drm_order(4096/8) << 8) | rb_bufsz); + (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz); #else - WREG32(CP_RB_CNTL, RB_NO_UPDATE | (drm_order(4096/8) << 8) | rb_bufsz); + WREG32(CP_RB_CNTL, RB_NO_UPDATE | (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz); #endif WREG32(CP_SEM_WAIT_TIMER, 0x4); @@ -1400,7 +1400,7 @@ int r600_wb_enable(struct radeon_device *rdev) int r; if (rdev->wb.wb_obj == NULL) { - r = radeon_object_create(rdev, NULL, 4096, true, + r = radeon_object_create(rdev, NULL, RADEON_GPU_PAGE_SIZE, true, RADEON_GEM_DOMAIN_GTT, false, &rdev->wb.wb_obj); if (r) { dev_warn(rdev->dev, "failed to create WB buffer (%d).\n", r); @@ -1450,8 +1450,8 @@ int r600_copy_blit(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, unsigned num_pages, struct radeon_fence *fence) { - r600_blit_prepare_copy(rdev, num_pages * 4096); - r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * 4096); + r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE); + r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE); r600_blit_done_copy(rdev, fence); return 0; } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 3598adca034a..8b60e36b20ba 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -276,6 +276,8 @@ union radeon_gart_table { struct radeon_gart_table_vram vram; }; +#define RADEON_GPU_PAGE_SIZE 4096 + struct radeon_gart { dma_addr_t table_addr; unsigned num_gpu_pages; diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c index 2e938f7496fb..10bd50a7db87 100644 --- a/drivers/gpu/drm/radeon/radeon_benchmark.c +++ b/drivers/gpu/drm/radeon/radeon_benchmark.c @@ -63,7 +63,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize, if (r) { goto out_cleanup; } - r = radeon_copy_dma(rdev, saddr, daddr, size / 4096, fence); + r = radeon_copy_dma(rdev, saddr, daddr, size / RADEON_GPU_PAGE_SIZE, fence); if (r) { goto out_cleanup; } @@ -88,7 +88,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize, if (r) { goto out_cleanup; } - r = radeon_copy_blit(rdev, saddr, daddr, size / 4096, fence); + r = radeon_copy_blit(rdev, saddr, daddr, size / RADEON_GPU_PAGE_SIZE, fence); if (r) { goto out_cleanup; } diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index a931af065dd4..a68d7566178c 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -140,15 +140,15 @@ void radeon_gart_unbind(struct radeon_device *rdev, unsigned offset, WARN(1, "trying to unbind memory to unitialized GART !\n"); return; } - t = offset / 4096; - p = t / (PAGE_SIZE / 4096); + t = offset / RADEON_GPU_PAGE_SIZE; + p = t / (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); for (i = 0; i < pages; i++, p++) { if (rdev->gart.pages[p]) { pci_unmap_page(rdev->pdev, rdev->gart.pages_addr[p], PAGE_SIZE, PCI_DMA_BIDIRECTIONAL); rdev->gart.pages[p] = NULL; rdev->gart.pages_addr[p] = 0; - for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) { + for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) { radeon_gart_set_page(rdev, t, 0); } } @@ -169,8 +169,8 @@ int radeon_gart_bind(struct radeon_device *rdev, unsigned offset, DRM_ERROR("trying to bind memory to unitialized GART !\n"); return -EINVAL; } - t = offset / 4096; - p = t / (PAGE_SIZE / 4096); + t = offset / RADEON_GPU_PAGE_SIZE; + p = t / (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); for (i = 0; i < pages; i++, p++) { /* we need to support large memory configurations */ @@ -185,9 +185,9 @@ int radeon_gart_bind(struct radeon_device *rdev, unsigned offset, } rdev->gart.pages[p] = pagelist[i]; page_base = rdev->gart.pages_addr[p]; - for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) { + for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) { radeon_gart_set_page(rdev, t, page_base); - page_base += 4096; + page_base += RADEON_GPU_PAGE_SIZE; } } mb(); @@ -200,14 +200,14 @@ int radeon_gart_init(struct radeon_device *rdev) if (rdev->gart.pages) { return 0; } - /* We need PAGE_SIZE >= 4096 */ - if (PAGE_SIZE < 4096) { + /* We need PAGE_SIZE >= RADEON_GPU_PAGE_SIZE */ + if (PAGE_SIZE < RADEON_GPU_PAGE_SIZE) { DRM_ERROR("Page size is smaller than GPU page size!\n"); return -EINVAL; } /* Compute table size */ rdev->gart.num_cpu_pages = rdev->mc.gtt_size / PAGE_SIZE; - rdev->gart.num_gpu_pages = rdev->mc.gtt_size / 4096; + rdev->gart.num_gpu_pages = rdev->mc.gtt_size / RADEON_GPU_PAGE_SIZE; DRM_INFO("GART: num cpu pages %u, num gpu pages %u\n", rdev->gart.num_cpu_pages, rdev->gart.num_gpu_pages); /* Allocate pages table */ diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c index 03c33cf4e14c..f8a465d9a1cf 100644 --- a/drivers/gpu/drm/radeon/radeon_test.c +++ b/drivers/gpu/drm/radeon/radeon_test.c @@ -42,7 +42,7 @@ void radeon_test_moves(struct radeon_device *rdev) /* Number of tests = * (Total GTT - IB pool - writeback page - ring buffer) / test size */ - n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - 4096 - + n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - RADEON_GPU_PAGE_SIZE - rdev->cp.ring_size) / size; gtt_obj = kzalloc(n * sizeof(*gtt_obj), GFP_KERNEL); @@ -102,7 +102,7 @@ void radeon_test_moves(struct radeon_device *rdev) goto out_cleanup; } - r = radeon_copy(rdev, gtt_addr, vram_addr, size / 4096, fence); + r = radeon_copy(rdev, gtt_addr, vram_addr, size / RADEON_GPU_PAGE_SIZE, fence); if (r) { DRM_ERROR("Failed GTT->VRAM copy %d\n", i); goto out_cleanup; @@ -145,7 +145,7 @@ void radeon_test_moves(struct radeon_device *rdev) goto out_cleanup; } - r = radeon_copy(rdev, vram_addr, gtt_addr, size / 4096, fence); + r = radeon_copy(rdev, vram_addr, gtt_addr, size / RADEON_GPU_PAGE_SIZE, fence); if (r) { DRM_ERROR("Failed VRAM->GTT copy %d\n", i); goto out_cleanup; From f059d2ad69b056aeabad4460f706a3df2f77ce50 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 14 Oct 2009 09:11:25 +0800 Subject: [PATCH 032/743] drm: Add the basic check for the detailed timing in EDID Sometimes we will get the incorrect display modeline when parsing the detailed timing in EDID. For example: >hsync/vsync width is zero >sync is beyond the blank. So add the basic check for the detailed timing in EDID to avoid the incorrect display modeline. Signed-off-by: Zhao Yakui Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 3c0d2b3aed76..cea665d86dd3 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -626,6 +626,12 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, return NULL; } + /* it is incorrect if hsync/vsync width is zero */ + if (!hsync_pulse_width || !vsync_pulse_width) { + DRM_DEBUG_KMS("Incorrect Detailed timing. " + "Wrong Hsync/Vsync pulse width\n"); + return NULL; + } mode = drm_mode_create(dev); if (!mode) return NULL; @@ -647,6 +653,15 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, mode->vsync_end = mode->vsync_start + vsync_pulse_width; mode->vtotal = mode->vdisplay + vblank; + /* perform the basic check for the detailed timing */ + if (mode->hsync_end > mode->htotal || + mode->vsync_end > mode->vtotal) { + drm_mode_destroy(dev, mode); + DRM_DEBUG_KMS("Incorrect detailed timing. " + "Sync is beyond the blank.\n"); + return NULL; + } + drm_mode_set_name(mode); if (pt->misc & DRM_EDID_PT_INTERLACED) From 2d152c6ba81c8a7776103b517fa454b8da0419aa Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 23:08:05 -0400 Subject: [PATCH 033/743] drm/radeon/kms: fix legacy quirk handling Need to check the return type for the quirk function to decide whether we add the connectors and encoders. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index e91aba8530b6..3c402b957f07 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -1626,8 +1626,9 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) break; } - radeon_apply_legacy_quirks(dev, i, &connector, - &ddc_i2c); + if (!radeon_apply_legacy_quirks(dev, i, &connector, + &ddc_i2c)) + continue; switch (connector) { case CONNECTOR_PROPRIETARY_LEGACY: From d0c403e950d449c8c413a1fbf05dfec45ce03e55 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 23:38:32 -0400 Subject: [PATCH 034/743] drm/radeon/kms: fix support for original r100 Original radeon didn't have a connector table in the bios. Check for the CRT table and if we have one, add a VGA connector. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 3c402b957f07..8298c990be7a 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -1773,8 +1773,25 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) DRM_MODE_CONNECTOR_DVII, &ddc_i2c); } else { - DRM_DEBUG("No connector info found\n"); - return false; + uint16_t crt_info = + combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE); + DRM_DEBUG("Found CRT table, assuming VGA connector\n"); + if (crt_info) { + radeon_add_legacy_encoder(dev, + radeon_get_encoder_id(dev, + ATOM_DEVICE_CRT1_SUPPORT, + 1), + ATOM_DEVICE_CRT1_SUPPORT); + ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); + radeon_add_legacy_connector(dev, + 0, + ATOM_DEVICE_CRT1_SUPPORT, + DRM_MODE_CONNECTOR_VGA, + &ddc_i2c); + } else { + DRM_DEBUG("No connector info found\n"); + return false; + } } } From c038e51e841581cc3fb9a76e5e16331331e9c85c Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 19 Oct 2009 15:43:48 +0800 Subject: [PATCH 035/743] drm/i915: fix to setup display reference clock control on Ironlake For new stepping of PCH, the display reference clock is fully under driver's control. This one trys to setup all needed reference clock for different outputs. Older stepping of PCH chipset should be ignoring this. This fixes output failure issue on newer PCH which requires driver to take control of reference clock enabling. Cc: Stable Team Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_reg.h | 4 +-- drivers/gpu/drm/i915/intel_display.c | 40 ++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b4813586d92c..cd0ffa015c27 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2158,11 +2158,11 @@ #define DREF_CPU_SOURCE_OUTPUT_MASK (3<<13) #define DREF_SSC_SOURCE_DISABLE (0<<11) #define DREF_SSC_SOURCE_ENABLE (2<<11) -#define DREF_SSC_SOURCE_MASK (2<<11) +#define DREF_SSC_SOURCE_MASK (3<<11) #define DREF_NONSPREAD_SOURCE_DISABLE (0<<9) #define DREF_NONSPREAD_CK505_ENABLE (1<<9) #define DREF_NONSPREAD_SOURCE_ENABLE (2<<9) -#define DREF_NONSPREAD_SOURCE_MASK (2<<9) +#define DREF_NONSPREAD_SOURCE_MASK (3<<9) #define DREF_SUPERSPREAD_SOURCE_DISABLE (0<<7) #define DREF_SUPERSPREAD_SOURCE_ENABLE (2<<7) #define DREF_SSC4_DOWNSPREAD (0<<6) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 123cce1ae470..db4c38700951 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2814,6 +2814,46 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, link_bw, &m_n); } + /* Ironlake: try to setup display ref clock before DPLL + * enabling. This is only under driver's control after + * PCH B stepping, previous chipset stepping should be + * ignoring this setting. + */ + if (IS_IGDNG(dev)) { + temp = I915_READ(PCH_DREF_CONTROL); + /* Always enable nonspread source */ + temp &= ~DREF_NONSPREAD_SOURCE_MASK; + temp |= DREF_NONSPREAD_SOURCE_ENABLE; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + + temp &= ~DREF_SSC_SOURCE_MASK; + temp |= DREF_SSC_SOURCE_ENABLE; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + + udelay(200); + + if (is_edp) { + if (dev_priv->lvds_use_ssc) { + temp |= DREF_SSC1_ENABLE; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + + udelay(200); + + temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; + temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + } else { + temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + } + } + } + if (IS_IGD(dev)) { fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2; if (has_reduced_clock) From b1f60b7029989da71fd8ea1b1176480fac9e846c Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 19 Oct 2009 15:43:49 +0800 Subject: [PATCH 036/743] drm/i915: fix panel fitting filter coefficient select for Ironlake Must set filter selection as hardcoded coefficients for medium 3x3 filtering, which matches vbios setting for Ironlake. This fixes display corrupt issue on HP arrandale with new vbios. Cc: Stable Team Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_reg.h | 5 +++++ drivers/gpu/drm/i915/intel_display.c | 2 +- 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index cd0ffa015c27..78f336e00836 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2039,6 +2039,11 @@ #define PFA_CTL_1 0x68080 #define PFB_CTL_1 0x68880 #define PF_ENABLE (1<<31) +#define PF_FILTER_MASK (3<<23) +#define PF_FILTER_PROGRAMMED (0<<23) +#define PF_FILTER_MED_3x3 (1<<23) +#define PF_FILTER_EDGE_ENHANCE (2<<23) +#define PF_FILTER_EDGE_SOFTEN (3<<23) #define PFA_WIN_SZ 0x68074 #define PFB_WIN_SZ 0x68874 #define PFA_WIN_POS 0x68070 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index db4c38700951..e189fd6dedcf 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1515,7 +1515,7 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode) /* Enable panel fitting for LVDS */ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { temp = I915_READ(pf_ctl_reg); - I915_WRITE(pf_ctl_reg, temp | PF_ENABLE); + I915_WRITE(pf_ctl_reg, temp | PF_ENABLE | PF_FILTER_MED_3x3); /* currently full aspect */ I915_WRITE(pf_win_pos, 0); From d54e9d28241fd52cca3df4f6bc2054a30d453fed Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 19 Oct 2009 15:43:51 +0800 Subject: [PATCH 037/743] drm/i915: quiet DP i2c init Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index f4856a510476..d83447557f9b 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -400,7 +400,7 @@ intel_dp_i2c_init(struct intel_output *intel_output, const char *name) { struct intel_dp_priv *dp_priv = intel_output->dev_priv; - DRM_ERROR("i2c_init %s\n", name); + DRM_DEBUG_KMS("i2c_init %s\n", name); dp_priv->algo.running = false; dp_priv->algo.address = 0; dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch; From 0e442c60dd39ac6924b11a20497734bd2303744c Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 19 Oct 2009 10:09:33 +0900 Subject: [PATCH 038/743] drm/i915: add FIFO watermark support for G4x Turns out G4x needs to have sensible watermarks set, especially for self-refresh enabled modes. Add support for it. Signed-off-by: Jesse Barnes Tested-by: Dirk Hohndel Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_reg.h | 12 +++++ drivers/gpu/drm/i915/intel_display.c | 80 +++++++++++++++++++++++++--- 2 files changed, 84 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 78f336e00836..1687edf68795 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1799,17 +1799,29 @@ #define DSPARB_AEND_SHIFT 0 #define DSPFW1 0x70034 +#define DSPFW_SR_SHIFT 23 +#define DSPFW_CURSORB_SHIFT 16 +#define DSPFW_PLANEB_SHIFT 8 #define DSPFW2 0x70038 +#define DSPFW_CURSORA_MASK 0x00003f00 +#define DSPFW_CURSORA_SHIFT 16 #define DSPFW3 0x7003c +#define DSPFW_HPLL_SR_EN (1<<31) +#define DSPFW_CURSOR_SR_SHIFT 24 #define IGD_SELF_REFRESH_EN (1<<30) /* FIFO watermark sizes etc */ +#define G4X_FIFO_LINE_SIZE 64 #define I915_FIFO_LINE_SIZE 64 #define I830_FIFO_LINE_SIZE 32 + +#define G4X_FIFO_SIZE 127 #define I945_FIFO_SIZE 127 /* 945 & 965 */ #define I915_FIFO_SIZE 95 #define I855GM_FIFO_SIZE 127 /* In cachelines */ #define I830_FIFO_SIZE 95 + +#define G4X_MAX_WM 0x3f #define I915_MAX_WM 0x3f #define IGD_DISPLAY_FIFO 512 /* in 64byte unit */ diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index e189fd6dedcf..47d6ff058991 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2143,6 +2143,13 @@ static struct intel_watermark_params igd_cursor_hplloff_wm = { IGD_CURSOR_GUARD_WM, IGD_FIFO_LINE_SIZE }; +static struct intel_watermark_params g4x_wm_info = { + G4X_FIFO_SIZE, + G4X_MAX_WM, + G4X_MAX_WM, + 2, + G4X_FIFO_LINE_SIZE, +}; static struct intel_watermark_params i945_wm_info = { I945_FIFO_SIZE, I915_MAX_WM, @@ -2433,17 +2440,74 @@ static int i830_get_fifo_size(struct drm_device *dev, int plane) return size; } -static void g4x_update_wm(struct drm_device *dev, int unused, int unused2, - int unused3, int unused4) +static void g4x_update_wm(struct drm_device *dev, int planea_clock, + int planeb_clock, int sr_hdisplay, int pixel_size) { struct drm_i915_private *dev_priv = dev->dev_private; - u32 fw_blc_self = I915_READ(FW_BLC_SELF); + int total_size, cacheline_size; + int planea_wm, planeb_wm, cursora_wm, cursorb_wm, cursor_sr; + struct intel_watermark_params planea_params, planeb_params; + unsigned long line_time_us; + int sr_clock, sr_entries = 0, entries_required; - if (i915_powersave) - fw_blc_self |= FW_BLC_SELF_EN; - else - fw_blc_self &= ~FW_BLC_SELF_EN; - I915_WRITE(FW_BLC_SELF, fw_blc_self); + /* Create copies of the base settings for each pipe */ + planea_params = planeb_params = g4x_wm_info; + + /* Grab a couple of global values before we overwrite them */ + total_size = planea_params.fifo_size; + cacheline_size = planea_params.cacheline_size; + + /* + * Note: we need to make sure we don't overflow for various clock & + * latency values. + * clocks go from a few thousand to several hundred thousand. + * latency is usually a few thousand + */ + entries_required = ((planea_clock / 1000) * pixel_size * latency_ns) / + 1000; + entries_required /= G4X_FIFO_LINE_SIZE; + planea_wm = entries_required + planea_params.guard_size; + + entries_required = ((planeb_clock / 1000) * pixel_size * latency_ns) / + 1000; + entries_required /= G4X_FIFO_LINE_SIZE; + planeb_wm = entries_required + planeb_params.guard_size; + + cursora_wm = cursorb_wm = 16; + cursor_sr = 32; + + DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm); + + /* Calc sr entries for one plane configs */ + if (sr_hdisplay && (!planea_clock || !planeb_clock)) { + /* self-refresh has much higher latency */ + const static int sr_latency_ns = 12000; + + sr_clock = planea_clock ? planea_clock : planeb_clock; + line_time_us = ((sr_hdisplay * 1000) / sr_clock); + + /* Use ns/us then divide to preserve precision */ + sr_entries = (((sr_latency_ns / line_time_us) + 1) * + pixel_size * sr_hdisplay) / 1000; + sr_entries = roundup(sr_entries / cacheline_size, 1); + DRM_DEBUG("self-refresh entries: %d\n", sr_entries); + I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); + } + + DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n", + planea_wm, planeb_wm, sr_entries); + + planea_wm &= 0x3f; + planeb_wm &= 0x3f; + + I915_WRITE(DSPFW1, (sr_entries << DSPFW_SR_SHIFT) | + (cursorb_wm << DSPFW_CURSORB_SHIFT) | + (planeb_wm << DSPFW_PLANEB_SHIFT) | planea_wm); + I915_WRITE(DSPFW2, (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) | + (cursora_wm << DSPFW_CURSORA_SHIFT)); + /* HPLL off in SR has some issues on G4x... disable it */ + I915_WRITE(DSPFW3, (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) | + (cursor_sr << DSPFW_CURSOR_SR_SHIFT)); } static void i965_update_wm(struct drm_device *dev, int unused, int unused2, From 629598da932cfa5ff398fe10bc123282a6f3049e Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 20 Oct 2009 07:37:32 +0900 Subject: [PATCH 039/743] drm/i915: update watermarks before enabling PLLs When coming back from DPMS or turning on a display, make sure we have the watermarks set up before turning on the display plane, otherwise we may get underruns. Signed-off-by: Jesse Barnes Tested-by: Dirk Hohndel Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 47d6ff058991..7eed3db5451d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1803,6 +1803,8 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) case DRM_MODE_DPMS_ON: case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: + intel_update_watermarks(dev); + /* Enable the DPLL */ temp = I915_READ(dpll_reg); if ((temp & DPLL_VCO_ENABLE) == 0) { @@ -1840,7 +1842,6 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) /* Give the overlay scaler a chance to enable if it's on this pipe */ //intel_crtc_dpms_video(crtc, true); TODO - intel_update_watermarks(dev); break; case DRM_MODE_DPMS_OFF: intel_update_watermarks(dev); From fe798b9718bea5c48938fc38fa78ae9503b8de6c Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 20 Oct 2009 07:55:28 +0900 Subject: [PATCH 040/743] drm/i915: kill warning in intel_find_pll_g4x_dp Initialize clock.vco to silence gcc. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 7eed3db5451d..3ba6546b7c7f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -943,6 +943,7 @@ intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2); clock.p = (clock.p1 * clock.p2); clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p; + clock.vco = 0; memcpy(best_clock, &clock, sizeof(intel_clock_t)); return true; } From 4204878179c99d419d392d78d817729992b4c442 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Wed, 21 Oct 2009 15:27:01 +0800 Subject: [PATCH 041/743] drm/i915: Ironlake suspend/resume support This adds registers save/restore for Ironlake to make suspend work. Signed-off-by: Guo, Chaohong [zhenyuw: some code re-orgnization, and add more save/restore for FDI link and transcoder registers, also fix palette register for Ironlake] Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 30 +++ drivers/gpu/drm/i915/i915_suspend.c | 281 ++++++++++++++++++++++------ 2 files changed, 256 insertions(+), 55 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index f6a3587ad065..9c67f0650a2a 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -296,6 +296,12 @@ typedef struct drm_i915_private { u32 saveVBLANK_A; u32 saveVSYNC_A; u32 saveBCLRPAT_A; + u32 saveTRANS_HTOTAL_A; + u32 saveTRANS_HBLANK_A; + u32 saveTRANS_HSYNC_A; + u32 saveTRANS_VTOTAL_A; + u32 saveTRANS_VBLANK_A; + u32 saveTRANS_VSYNC_A; u32 savePIPEASTAT; u32 saveDSPASTRIDE; u32 saveDSPASIZE; @@ -307,6 +313,8 @@ typedef struct drm_i915_private { u32 saveBLC_HIST_CTL; u32 saveBLC_PWM_CTL; u32 saveBLC_PWM_CTL2; + u32 saveBLC_CPU_PWM_CTL; + u32 saveBLC_CPU_PWM_CTL2; u32 saveFPB0; u32 saveFPB1; u32 saveDPLL_B; @@ -318,6 +326,12 @@ typedef struct drm_i915_private { u32 saveVBLANK_B; u32 saveVSYNC_B; u32 saveBCLRPAT_B; + u32 saveTRANS_HTOTAL_B; + u32 saveTRANS_HBLANK_B; + u32 saveTRANS_HSYNC_B; + u32 saveTRANS_VTOTAL_B; + u32 saveTRANS_VBLANK_B; + u32 saveTRANS_VSYNC_B; u32 savePIPEBSTAT; u32 saveDSPBSTRIDE; u32 saveDSPBSIZE; @@ -351,6 +365,12 @@ typedef struct drm_i915_private { u32 saveIER; u32 saveIIR; u32 saveIMR; + u32 saveDEIER; + u32 saveDEIMR; + u32 saveGTIER; + u32 saveGTIMR; + u32 saveFDI_RXA_IMR; + u32 saveFDI_RXB_IMR; u32 saveCACHE_MODE_0; u32 saveD_STATE; u32 saveDSPCLK_GATE_D; @@ -384,6 +404,16 @@ typedef struct drm_i915_private { u32 savePIPEB_DP_LINK_M; u32 savePIPEA_DP_LINK_N; u32 savePIPEB_DP_LINK_N; + u32 saveFDI_RXA_CTL; + u32 saveFDI_TXA_CTL; + u32 saveFDI_RXB_CTL; + u32 saveFDI_TXB_CTL; + u32 savePFA_CTL_1; + u32 savePFB_CTL_1; + u32 savePFA_WIN_SZ; + u32 savePFB_WIN_SZ; + u32 savePFA_WIN_POS; + u32 savePFB_WIN_POS; struct { struct drm_mm gtt_space; diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 75c5bed48be0..992d5617e798 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -32,11 +32,15 @@ static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) { struct drm_i915_private *dev_priv = dev->dev_private; + u32 dpll_reg; - if (pipe == PIPE_A) - return (I915_READ(DPLL_A) & DPLL_VCO_ENABLE); - else - return (I915_READ(DPLL_B) & DPLL_VCO_ENABLE); + if (IS_IGDNG(dev)) { + dpll_reg = (pipe == PIPE_A) ? PCH_DPLL_A: PCH_DPLL_B; + } else { + dpll_reg = (pipe == PIPE_A) ? DPLL_A: DPLL_B; + } + + return (I915_READ(dpll_reg) & DPLL_VCO_ENABLE); } static void i915_save_palette(struct drm_device *dev, enum pipe pipe) @@ -49,6 +53,9 @@ static void i915_save_palette(struct drm_device *dev, enum pipe pipe) if (!i915_pipe_enabled(dev, pipe)) return; + if (IS_IGDNG(dev)) + reg = (pipe == PIPE_A) ? LGC_PALETTE_A : LGC_PALETTE_B; + if (pipe == PIPE_A) array = dev_priv->save_palette_a; else @@ -68,6 +75,9 @@ static void i915_restore_palette(struct drm_device *dev, enum pipe pipe) if (!i915_pipe_enabled(dev, pipe)) return; + if (IS_IGDNG(dev)) + reg = (pipe == PIPE_A) ? LGC_PALETTE_A : LGC_PALETTE_B; + if (pipe == PIPE_A) array = dev_priv->save_palette_a; else @@ -232,10 +242,16 @@ static void i915_save_modeset_reg(struct drm_device *dev) /* Pipe & plane A info */ dev_priv->savePIPEACONF = I915_READ(PIPEACONF); dev_priv->savePIPEASRC = I915_READ(PIPEASRC); - dev_priv->saveFPA0 = I915_READ(FPA0); - dev_priv->saveFPA1 = I915_READ(FPA1); - dev_priv->saveDPLL_A = I915_READ(DPLL_A); - if (IS_I965G(dev)) + if (IS_IGDNG(dev)) { + dev_priv->saveFPA0 = I915_READ(PCH_FPA0); + dev_priv->saveFPA1 = I915_READ(PCH_FPA1); + dev_priv->saveDPLL_A = I915_READ(PCH_DPLL_A); + } else { + dev_priv->saveFPA0 = I915_READ(FPA0); + dev_priv->saveFPA1 = I915_READ(FPA1); + dev_priv->saveDPLL_A = I915_READ(DPLL_A); + } + if (IS_I965G(dev) && !IS_IGDNG(dev)) dev_priv->saveDPLL_A_MD = I915_READ(DPLL_A_MD); dev_priv->saveHTOTAL_A = I915_READ(HTOTAL_A); dev_priv->saveHBLANK_A = I915_READ(HBLANK_A); @@ -243,7 +259,24 @@ static void i915_save_modeset_reg(struct drm_device *dev) dev_priv->saveVTOTAL_A = I915_READ(VTOTAL_A); dev_priv->saveVBLANK_A = I915_READ(VBLANK_A); dev_priv->saveVSYNC_A = I915_READ(VSYNC_A); - dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); + if (!IS_IGDNG(dev)) + dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); + + if (IS_IGDNG(dev)) { + dev_priv->saveFDI_TXA_CTL = I915_READ(FDI_TXA_CTL); + dev_priv->saveFDI_RXA_CTL = I915_READ(FDI_RXA_CTL); + + dev_priv->savePFA_CTL_1 = I915_READ(PFA_CTL_1); + dev_priv->savePFA_WIN_SZ = I915_READ(PFA_WIN_SZ); + dev_priv->savePFA_WIN_POS = I915_READ(PFA_WIN_POS); + + dev_priv->saveTRANS_HTOTAL_A = I915_READ(TRANS_HTOTAL_A); + dev_priv->saveTRANS_HBLANK_A = I915_READ(TRANS_HBLANK_A); + dev_priv->saveTRANS_HSYNC_A = I915_READ(TRANS_HSYNC_A); + dev_priv->saveTRANS_VTOTAL_A = I915_READ(TRANS_VTOTAL_A); + dev_priv->saveTRANS_VBLANK_A = I915_READ(TRANS_VBLANK_A); + dev_priv->saveTRANS_VSYNC_A = I915_READ(TRANS_VSYNC_A); + } dev_priv->saveDSPACNTR = I915_READ(DSPACNTR); dev_priv->saveDSPASTRIDE = I915_READ(DSPASTRIDE); @@ -260,10 +293,16 @@ static void i915_save_modeset_reg(struct drm_device *dev) /* Pipe & plane B info */ dev_priv->savePIPEBCONF = I915_READ(PIPEBCONF); dev_priv->savePIPEBSRC = I915_READ(PIPEBSRC); - dev_priv->saveFPB0 = I915_READ(FPB0); - dev_priv->saveFPB1 = I915_READ(FPB1); - dev_priv->saveDPLL_B = I915_READ(DPLL_B); - if (IS_I965G(dev)) + if (IS_IGDNG(dev)) { + dev_priv->saveFPB0 = I915_READ(PCH_FPB0); + dev_priv->saveFPB1 = I915_READ(PCH_FPB1); + dev_priv->saveDPLL_B = I915_READ(PCH_DPLL_B); + } else { + dev_priv->saveFPB0 = I915_READ(FPB0); + dev_priv->saveFPB1 = I915_READ(FPB1); + dev_priv->saveDPLL_B = I915_READ(DPLL_B); + } + if (IS_I965G(dev) && !IS_IGDNG(dev)) dev_priv->saveDPLL_B_MD = I915_READ(DPLL_B_MD); dev_priv->saveHTOTAL_B = I915_READ(HTOTAL_B); dev_priv->saveHBLANK_B = I915_READ(HBLANK_B); @@ -271,7 +310,24 @@ static void i915_save_modeset_reg(struct drm_device *dev) dev_priv->saveVTOTAL_B = I915_READ(VTOTAL_B); dev_priv->saveVBLANK_B = I915_READ(VBLANK_B); dev_priv->saveVSYNC_B = I915_READ(VSYNC_B); - dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); + if (!IS_IGDNG(dev)) + dev_priv->saveBCLRPAT_B = I915_READ(BCLRPAT_B); + + if (IS_IGDNG(dev)) { + dev_priv->saveFDI_TXB_CTL = I915_READ(FDI_TXB_CTL); + dev_priv->saveFDI_RXB_CTL = I915_READ(FDI_RXB_CTL); + + dev_priv->savePFB_CTL_1 = I915_READ(PFB_CTL_1); + dev_priv->savePFB_WIN_SZ = I915_READ(PFB_WIN_SZ); + dev_priv->savePFB_WIN_POS = I915_READ(PFB_WIN_POS); + + dev_priv->saveTRANS_HTOTAL_B = I915_READ(TRANS_HTOTAL_B); + dev_priv->saveTRANS_HBLANK_B = I915_READ(TRANS_HBLANK_B); + dev_priv->saveTRANS_HSYNC_B = I915_READ(TRANS_HSYNC_B); + dev_priv->saveTRANS_VTOTAL_B = I915_READ(TRANS_VTOTAL_B); + dev_priv->saveTRANS_VBLANK_B = I915_READ(TRANS_VBLANK_B); + dev_priv->saveTRANS_VSYNC_B = I915_READ(TRANS_VSYNC_B); + } dev_priv->saveDSPBCNTR = I915_READ(DSPBCNTR); dev_priv->saveDSPBSTRIDE = I915_READ(DSPBSTRIDE); @@ -290,23 +346,41 @@ static void i915_save_modeset_reg(struct drm_device *dev) static void i915_restore_modeset_reg(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + int dpll_a_reg, fpa0_reg, fpa1_reg; + int dpll_b_reg, fpb0_reg, fpb1_reg; if (drm_core_check_feature(dev, DRIVER_MODESET)) return; + if (IS_IGDNG(dev)) { + dpll_a_reg = PCH_DPLL_A; + dpll_b_reg = PCH_DPLL_B; + fpa0_reg = PCH_FPA0; + fpb0_reg = PCH_FPB0; + fpa1_reg = PCH_FPA1; + fpb1_reg = PCH_FPB1; + } else { + dpll_a_reg = DPLL_A; + dpll_b_reg = DPLL_B; + fpa0_reg = FPA0; + fpb0_reg = FPB0; + fpa1_reg = FPA1; + fpb1_reg = FPB1; + } + /* Pipe & plane A info */ /* Prime the clock */ if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { - I915_WRITE(DPLL_A, dev_priv->saveDPLL_A & + I915_WRITE(dpll_a_reg, dev_priv->saveDPLL_A & ~DPLL_VCO_ENABLE); DRM_UDELAY(150); } - I915_WRITE(FPA0, dev_priv->saveFPA0); - I915_WRITE(FPA1, dev_priv->saveFPA1); + I915_WRITE(fpa0_reg, dev_priv->saveFPA0); + I915_WRITE(fpa1_reg, dev_priv->saveFPA1); /* Actually enable it */ - I915_WRITE(DPLL_A, dev_priv->saveDPLL_A); + I915_WRITE(dpll_a_reg, dev_priv->saveDPLL_A); DRM_UDELAY(150); - if (IS_I965G(dev)) + if (IS_I965G(dev) && !IS_IGDNG(dev)) I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD); DRM_UDELAY(150); @@ -317,7 +391,24 @@ static void i915_restore_modeset_reg(struct drm_device *dev) I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A); I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A); I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A); - I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A); + if (!IS_IGDNG(dev)) + I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A); + + if (IS_IGDNG(dev)) { + I915_WRITE(FDI_RXA_CTL, dev_priv->saveFDI_RXA_CTL); + I915_WRITE(FDI_TXA_CTL, dev_priv->saveFDI_TXA_CTL); + + I915_WRITE(PFA_CTL_1, dev_priv->savePFA_CTL_1); + I915_WRITE(PFA_WIN_SZ, dev_priv->savePFA_WIN_SZ); + I915_WRITE(PFA_WIN_POS, dev_priv->savePFA_WIN_POS); + + I915_WRITE(TRANS_HTOTAL_A, dev_priv->saveTRANS_HTOTAL_A); + I915_WRITE(TRANS_HBLANK_A, dev_priv->saveTRANS_HBLANK_A); + I915_WRITE(TRANS_HSYNC_A, dev_priv->saveTRANS_HSYNC_A); + I915_WRITE(TRANS_VTOTAL_A, dev_priv->saveTRANS_VTOTAL_A); + I915_WRITE(TRANS_VBLANK_A, dev_priv->saveTRANS_VBLANK_A); + I915_WRITE(TRANS_VSYNC_A, dev_priv->saveTRANS_VSYNC_A); + } /* Restore plane info */ I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE); @@ -339,14 +430,14 @@ static void i915_restore_modeset_reg(struct drm_device *dev) /* Pipe & plane B info */ if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) { - I915_WRITE(DPLL_B, dev_priv->saveDPLL_B & + I915_WRITE(dpll_b_reg, dev_priv->saveDPLL_B & ~DPLL_VCO_ENABLE); DRM_UDELAY(150); } - I915_WRITE(FPB0, dev_priv->saveFPB0); - I915_WRITE(FPB1, dev_priv->saveFPB1); + I915_WRITE(fpb0_reg, dev_priv->saveFPB0); + I915_WRITE(fpb1_reg, dev_priv->saveFPB1); /* Actually enable it */ - I915_WRITE(DPLL_B, dev_priv->saveDPLL_B); + I915_WRITE(dpll_b_reg, dev_priv->saveDPLL_B); DRM_UDELAY(150); if (IS_I965G(dev)) I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD); @@ -359,7 +450,24 @@ static void i915_restore_modeset_reg(struct drm_device *dev) I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B); I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B); I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B); - I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B); + if (!IS_IGDNG(dev)) + I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B); + + if (IS_IGDNG(dev)) { + I915_WRITE(FDI_RXB_CTL, dev_priv->saveFDI_RXB_CTL); + I915_WRITE(FDI_TXB_CTL, dev_priv->saveFDI_TXB_CTL); + + I915_WRITE(PFB_CTL_1, dev_priv->savePFB_CTL_1); + I915_WRITE(PFB_WIN_SZ, dev_priv->savePFB_WIN_SZ); + I915_WRITE(PFB_WIN_POS, dev_priv->savePFB_WIN_POS); + + I915_WRITE(TRANS_HTOTAL_B, dev_priv->saveTRANS_HTOTAL_B); + I915_WRITE(TRANS_HBLANK_B, dev_priv->saveTRANS_HBLANK_B); + I915_WRITE(TRANS_HSYNC_B, dev_priv->saveTRANS_HSYNC_B); + I915_WRITE(TRANS_VTOTAL_B, dev_priv->saveTRANS_VTOTAL_B); + I915_WRITE(TRANS_VBLANK_B, dev_priv->saveTRANS_VBLANK_B); + I915_WRITE(TRANS_VSYNC_B, dev_priv->saveTRANS_VSYNC_B); + } /* Restore plane info */ I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE); @@ -404,22 +512,43 @@ void i915_save_display(struct drm_device *dev) dev_priv->saveCURSIZE = I915_READ(CURSIZE); /* CRT state */ - dev_priv->saveADPA = I915_READ(ADPA); + if (IS_IGDNG(dev)) { + dev_priv->saveADPA = I915_READ(PCH_ADPA); + } else { + dev_priv->saveADPA = I915_READ(ADPA); + } /* LVDS state */ - dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL); - dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS); - dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); - dev_priv->saveBLC_HIST_CTL = I915_READ(BLC_HIST_CTL); - if (IS_I965G(dev)) - dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2); - if (IS_MOBILE(dev) && !IS_I830(dev)) - dev_priv->saveLVDS = I915_READ(LVDS); - if (!IS_I830(dev) && !IS_845G(dev)) + if (IS_IGDNG(dev)) { + dev_priv->savePP_CONTROL = I915_READ(PCH_PP_CONTROL); + dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_PCH_CTL1); + dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_PCH_CTL2); + dev_priv->saveBLC_CPU_PWM_CTL = I915_READ(BLC_PWM_CPU_CTL); + dev_priv->saveBLC_CPU_PWM_CTL2 = I915_READ(BLC_PWM_CPU_CTL2); + dev_priv->saveLVDS = I915_READ(PCH_LVDS); + } else { + dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL); + dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS); + dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); + dev_priv->saveBLC_HIST_CTL = I915_READ(BLC_HIST_CTL); + if (IS_I965G(dev)) + dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2); + if (IS_MOBILE(dev) && !IS_I830(dev)) + dev_priv->saveLVDS = I915_READ(LVDS); + } + + if (!IS_I830(dev) && !IS_845G(dev) && !IS_IGDNG(dev)) dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL); - dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS); - dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS); - dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR); + + if (IS_IGDNG(dev)) { + dev_priv->savePP_ON_DELAYS = I915_READ(PCH_PP_ON_DELAYS); + dev_priv->savePP_OFF_DELAYS = I915_READ(PCH_PP_OFF_DELAYS); + dev_priv->savePP_DIVISOR = I915_READ(PCH_PP_DIVISOR); + } else { + dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS); + dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS); + dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR); + } /* Display Port state */ if (SUPPORTS_INTEGRATED_DP(dev)) { @@ -451,7 +580,10 @@ void i915_save_display(struct drm_device *dev) dev_priv->saveVGA0 = I915_READ(VGA0); dev_priv->saveVGA1 = I915_READ(VGA1); dev_priv->saveVGA_PD = I915_READ(VGA_PD); - dev_priv->saveVGACNTRL = I915_READ(VGACNTRL); + if (IS_IGDNG(dev)) + dev_priv->saveVGACNTRL = I915_READ(CPU_VGACNTRL); + else + dev_priv->saveVGACNTRL = I915_READ(VGACNTRL); i915_save_vga(dev); } @@ -490,23 +622,41 @@ void i915_restore_display(struct drm_device *dev) I915_WRITE(CURSIZE, dev_priv->saveCURSIZE); /* CRT state */ - I915_WRITE(ADPA, dev_priv->saveADPA); + if (IS_IGDNG(dev)) + I915_WRITE(PCH_ADPA, dev_priv->saveADPA); + else + I915_WRITE(ADPA, dev_priv->saveADPA); /* LVDS state */ - if (IS_I965G(dev)) + if (IS_I965G(dev) && !IS_IGDNG(dev)) I915_WRITE(BLC_PWM_CTL2, dev_priv->saveBLC_PWM_CTL2); - if (IS_MOBILE(dev) && !IS_I830(dev)) + + if (IS_IGDNG(dev)) { + I915_WRITE(PCH_LVDS, dev_priv->saveLVDS); + } else if (IS_MOBILE(dev) && !IS_I830(dev)) I915_WRITE(LVDS, dev_priv->saveLVDS); - if (!IS_I830(dev) && !IS_845G(dev)) + + if (!IS_I830(dev) && !IS_845G(dev) && !IS_IGDNG(dev)) I915_WRITE(PFIT_CONTROL, dev_priv->savePFIT_CONTROL); - I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS); - I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); - I915_WRITE(BLC_HIST_CTL, dev_priv->saveBLC_HIST_CTL); - I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS); - I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS); - I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); - I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); + if (IS_IGDNG(dev)) { + I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->saveBLC_PWM_CTL); + I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->saveBLC_PWM_CTL2); + I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL); + I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->saveBLC_CPU_PWM_CTL2); + I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS); + I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS); + I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR); + I915_WRITE(PCH_PP_CONTROL, dev_priv->savePP_CONTROL); + } else { + I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS); + I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); + I915_WRITE(BLC_HIST_CTL, dev_priv->saveBLC_HIST_CTL); + I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS); + I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS); + I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); + I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); + } /* Display Port state */ if (SUPPORTS_INTEGRATED_DP(dev)) { @@ -529,7 +679,10 @@ void i915_restore_display(struct drm_device *dev) } /* VGA state */ - I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); + if (IS_IGDNG(dev)) + I915_WRITE(CPU_VGACNTRL, dev_priv->saveVGACNTRL); + else + I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); I915_WRITE(VGA0, dev_priv->saveVGA0); I915_WRITE(VGA1, dev_priv->saveVGA1); I915_WRITE(VGA_PD, dev_priv->saveVGA_PD); @@ -555,8 +708,17 @@ int i915_save_state(struct drm_device *dev) i915_save_display(dev); /* Interrupt state */ - dev_priv->saveIER = I915_READ(IER); - dev_priv->saveIMR = I915_READ(IMR); + if (IS_IGDNG(dev)) { + dev_priv->saveDEIER = I915_READ(DEIER); + dev_priv->saveDEIMR = I915_READ(DEIMR); + dev_priv->saveGTIER = I915_READ(GTIER); + dev_priv->saveGTIMR = I915_READ(GTIMR); + dev_priv->saveFDI_RXA_IMR = I915_READ(FDI_RXA_IMR); + dev_priv->saveFDI_RXB_IMR = I915_READ(FDI_RXB_IMR); + } else { + dev_priv->saveIER = I915_READ(IER); + dev_priv->saveIMR = I915_READ(IMR); + } /* Clock gating state */ dev_priv->saveD_STATE = I915_READ(D_STATE); @@ -621,8 +783,17 @@ int i915_restore_state(struct drm_device *dev) i915_restore_display(dev); /* Interrupt state */ - I915_WRITE (IER, dev_priv->saveIER); - I915_WRITE (IMR, dev_priv->saveIMR); + if (IS_IGDNG(dev)) { + I915_WRITE(DEIER, dev_priv->saveDEIER); + I915_WRITE(DEIMR, dev_priv->saveDEIMR); + I915_WRITE(GTIER, dev_priv->saveGTIER); + I915_WRITE(GTIMR, dev_priv->saveGTIMR); + I915_WRITE(FDI_RXA_IMR, dev_priv->saveFDI_RXA_IMR); + I915_WRITE(FDI_RXB_IMR, dev_priv->saveFDI_RXB_IMR); + } else { + I915_WRITE (IER, dev_priv->saveIER); + I915_WRITE (IMR, dev_priv->saveIMR); + } /* Clock gating state */ I915_WRITE (D_STATE, dev_priv->saveD_STATE); From f685ceacab07d3f6c236f04803e2f2f0dbcc5afb Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Fri, 23 Oct 2009 23:09:22 +0200 Subject: [PATCH 042/743] sched: Strengthen buddies and mitigate buddy induced latencies This patch restores the effectiveness of LAST_BUDDY in preventing pgsql+oltp from collapsing due to wakeup preemption. It also switches LAST_BUDDY to exclusively do what it does best, namely mitigate the effects of aggressive wakeup preemption, which improves vmark throughput markedly, and restores mysql+oltp scalability. Since buddies are about scalability, enable them beginning at the point where we begin expanding sched_latency, namely sched_nr_latency. Previously, buddies were cleared aggressively, which seriously reduced their effectiveness. Not clearing aggressively however, produces a small drop in mysql+oltp throughput immediately after peak, indicating that LAST_BUDDY is actually doing some harm. This is right at the point where X on the desktop in competition with another load wants low latency service. Ergo, do not enable until we need to scale. To mitigate latency induced by buddies, or by a task just missing wakeup preemption, check latency at tick time. Last hunk prevents buddies from stymieing BALANCE_NEWIDLE via CACHE_HOT_BUDDY. Supporting performance tests: tip = v2.6.32-rc5-1497-ga525b32 tipx = NO_GENTLE_FAIR_SLEEPERS NEXT_BUDDY granularity knobs = 31 knobs + 31 buddies tip+x = NO_GENTLE_FAIR_SLEEPERS granularity knobs = 31 knobs (Three run averages except where noted.) vmark: ------ tip 108466 messages per second tip+ 125307 messages per second tip+x 125335 messages per second tipx 117781 messages per second 2.6.31.3 122729 messages per second mysql+oltp: ----------- clients 1 2 4 8 16 32 64 128 256 .......................................................................................... tip 9949.89 18690.20 34801.24 34460.04 32682.88 30765.97 28305.27 25059.64 19548.08 tip+ 10013.90 18526.84 34900.38 34420.14 33069.83 32083.40 30578.30 28010.71 25605.47 tipx 9698.71 18002.70 34477.56 33420.01 32634.30 31657.27 29932.67 26827.52 21487.18 2.6.31.3 8243.11 18784.20 34404.83 33148.38 31900.32 31161.90 29663.81 25995.94 18058.86 pgsql+oltp: ----------- clients 1 2 4 8 16 32 64 128 256 .......................................................................................... tip 13686.37 26609.25 51934.28 51347.81 49479.51 45312.65 36691.91 26851.57 24145.35 tip+ (1x) 13907.85 27135.87 52951.98 52514.04 51742.52 50705.43 49947.97 48374.19 46227.94 tip+x 13906.78 27065.81 52951.19 52542.59 52176.11 51815.94 50838.90 49439.46 46891.00 tipx 13742.46 26769.81 52351.99 51891.73 51320.79 50938.98 50248.65 48908.70 46553.84 2.6.31.3 13815.35 26906.46 52683.34 52061.31 51937.10 51376.80 50474.28 49394.47 47003.25 Signed-off-by: Mike Galbraith Cc: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- kernel/sched_fair.c | 73 +++++++++++++++++++++++++++++---------------- 2 files changed, 48 insertions(+), 27 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 789001da0a94..cae6700bedb3 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2008,7 +2008,7 @@ task_hot(struct task_struct *p, u64 now, struct sched_domain *sd) /* * Buddy candidates are cache hot: */ - if (sched_feat(CACHE_HOT_BUDDY) && + if (sched_feat(CACHE_HOT_BUDDY) && this_rq()->nr_running && (&p->se == cfs_rq_of(&p->se)->next || &p->se == cfs_rq_of(&p->se)->last)) return 1; diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index c32c3e643daa..37087a7fac22 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -822,6 +822,26 @@ check_preempt_tick(struct cfs_rq *cfs_rq, struct sched_entity *curr) * re-elected due to buddy favours. */ clear_buddies(cfs_rq, curr); + return; + } + + /* + * Ensure that a task that missed wakeup preemption by a + * narrow margin doesn't have to wait for a full slice. + * This also mitigates buddy induced latencies under load. + */ + if (!sched_feat(WAKEUP_PREEMPT)) + return; + + if (delta_exec < sysctl_sched_min_granularity) + return; + + if (cfs_rq->nr_running > 1) { + struct sched_entity *se = __pick_next_entity(cfs_rq); + s64 delta = curr->vruntime - se->vruntime; + + if (delta > ideal_runtime) + resched_task(rq_of(cfs_rq)->curr); } } @@ -861,21 +881,18 @@ wakeup_preempt_entity(struct sched_entity *curr, struct sched_entity *se); static struct sched_entity *pick_next_entity(struct cfs_rq *cfs_rq) { struct sched_entity *se = __pick_next_entity(cfs_rq); - struct sched_entity *buddy; + struct sched_entity *left = se; - if (cfs_rq->next) { - buddy = cfs_rq->next; - cfs_rq->next = NULL; - if (wakeup_preempt_entity(buddy, se) < 1) - return buddy; - } + if (cfs_rq->next && wakeup_preempt_entity(cfs_rq->next, left) < 1) + se = cfs_rq->next; - if (cfs_rq->last) { - buddy = cfs_rq->last; - cfs_rq->last = NULL; - if (wakeup_preempt_entity(buddy, se) < 1) - return buddy; - } + /* + * Prefer last buddy, try to return the CPU to a preempted task. + */ + if (cfs_rq->last && wakeup_preempt_entity(cfs_rq->last, left) < 1) + se = cfs_rq->last; + + clear_buddies(cfs_rq, se); return se; } @@ -1577,6 +1594,7 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int wake_ struct sched_entity *se = &curr->se, *pse = &p->se; struct cfs_rq *cfs_rq = task_cfs_rq(curr); int sync = wake_flags & WF_SYNC; + int scale = cfs_rq->nr_running >= sched_nr_latency; update_curr(cfs_rq); @@ -1591,18 +1609,7 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int wake_ if (unlikely(se == pse)) return; - /* - * Only set the backward buddy when the current task is still on the - * rq. This can happen when a wakeup gets interleaved with schedule on - * the ->pre_schedule() or idle_balance() point, either of which can - * drop the rq lock. - * - * Also, during early boot the idle thread is in the fair class, for - * obvious reasons its a bad idea to schedule back to the idle thread. - */ - if (sched_feat(LAST_BUDDY) && likely(se->on_rq && curr != rq->idle)) - set_last_buddy(se); - if (sched_feat(NEXT_BUDDY) && !(wake_flags & WF_FORK)) + if (sched_feat(NEXT_BUDDY) && scale && !(wake_flags & WF_FORK)) set_next_buddy(pse); /* @@ -1648,8 +1655,22 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int wake_ BUG_ON(!pse); - if (wakeup_preempt_entity(se, pse) == 1) + if (wakeup_preempt_entity(se, pse) == 1) { resched_task(curr); + /* + * Only set the backward buddy when the current task is still + * on the rq. This can happen when a wakeup gets interleaved + * with schedule on the ->pre_schedule() or idle_balance() + * point, either of which can * drop the rq lock. + * + * Also, during early boot the idle thread is in the fair class, + * for obvious reasons its a bad idea to schedule back to it. + */ + if (unlikely(!se->on_rq || curr == rq->idle)) + return; + if (sched_feat(LAST_BUDDY) && scale && entity_is_task(se)) + set_last_buddy(se); + } } static struct task_struct *pick_next_task_fair(struct rq *rq) From c850cb782626fda78e5e9e5baf18a5bd806a225c Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 23 Oct 2009 18:49:03 +1000 Subject: [PATCH 043/743] drm/kms: fix kms/fbdev colormap support properly. This sets the fbcon to use TRUECOLOR by default, it then only modifies the pseudo palette for fbcon, and only touches the real palette when in 8-bit pseudo color mode. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 42 +++++++++++++++++++++++---------- 1 file changed, 29 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 23dc9c115fd9..9c924614c418 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -454,22 +454,39 @@ out_free: } EXPORT_SYMBOL(drm_fb_helper_init_crtc_count); -static void setcolreg(struct drm_crtc *crtc, u16 red, u16 green, +static int setcolreg(struct drm_crtc *crtc, u16 red, u16 green, u16 blue, u16 regno, struct fb_info *info) { struct drm_fb_helper *fb_helper = info->par; struct drm_framebuffer *fb = fb_helper->fb; int pindex; + if (info->fix.visual == FB_VISUAL_TRUECOLOR) { + u32 *palette; + u32 value; + /* place color in psuedopalette */ + if (regno > 16) + return -EINVAL; + palette = (u32 *)info->pseudo_palette; + red >>= (16 - info->var.red.length); + green >>= (16 - info->var.green.length); + blue >>= (16 - info->var.blue.length); + value = (red << info->var.red.offset) | + (green << info->var.green.offset) | + (blue << info->var.blue.offset); + palette[regno] = value; + return 0; + } + pindex = regno; if (fb->bits_per_pixel == 16) { pindex = regno << 3; if (fb->depth == 16 && regno > 63) - return; + return -EINVAL; if (fb->depth == 15 && regno > 31) - return; + return -EINVAL; if (fb->depth == 16) { u16 r, g, b; @@ -493,13 +510,7 @@ static void setcolreg(struct drm_crtc *crtc, u16 red, u16 green, if (fb->depth != 16) fb_helper->funcs->gamma_set(crtc, red, green, blue, pindex); - - if (regno < 16 && info->fix.visual == FB_VISUAL_DIRECTCOLOR) { - ((u32 *) fb->pseudo_palette)[regno] = - (regno << info->var.red.offset) | - (regno << info->var.green.offset) | - (regno << info->var.blue.offset); - } + return 0; } int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info) @@ -536,7 +547,9 @@ int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info) if (transp) htransp = *transp++; - setcolreg(crtc, hred, hgreen, hblue, start++, info); + rc = setcolreg(crtc, hred, hgreen, hblue, start++, info); + if (rc) + return rc; } crtc_funcs->load_lut(crtc); } @@ -555,6 +568,7 @@ int drm_fb_helper_setcolreg(unsigned regno, struct drm_device *dev = fb_helper->dev; struct drm_crtc *crtc; int i; + int ret; if (regno > 255) return 1; @@ -568,8 +582,10 @@ int drm_fb_helper_setcolreg(unsigned regno, if (i == fb_helper->crtc_count) continue; + ret = setcolreg(crtc, red, green, blue, regno, info); + if (ret) + return ret; - setcolreg(crtc, red, green, blue, regno, info); crtc_funcs->load_lut(crtc); } return 0; @@ -928,7 +944,7 @@ void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch, { info->fix.type = FB_TYPE_PACKED_PIXELS; info->fix.visual = depth == 8 ? FB_VISUAL_PSEUDOCOLOR : - FB_VISUAL_DIRECTCOLOR; + FB_VISUAL_TRUECOLOR; info->fix.type_aux = 0; info->fix.xpanstep = 1; /* doing it in hw */ info->fix.ypanstep = 1; /* doing it in hw */ From ceb776bc87280eb8d13f38e4d7afae757e95af44 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Mathias=20Fr=C3=B6hlich?= Date: Mon, 19 Oct 2009 12:50:41 -0400 Subject: [PATCH 044/743] drm/radeon/kms: fix cs parser tex bit 11 check The problem boils down to the order when the bit11 of the texture size is or'ed to the original width. In the end each mipmap level has the same width or height because of that 11 bit is ored to the scaled down lod with and thus blows up the size again to the full size or more due to the power of two rounding afterwards. The attached patch changes this order so that the texture sizes are computed correct. Also the on error the yet missing inputs to the size computation are printed which helped me to find out where it really breaks. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index c22adff179a9..ed5e983d21e9 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -2548,8 +2548,11 @@ void r100_bandwidth_update(struct radeon_device *rdev) static inline void r100_cs_track_texture_print(struct r100_cs_track_texture *t) { DRM_ERROR("pitch %d\n", t->pitch); + DRM_ERROR("use_pitch %d\n", t->use_pitch); DRM_ERROR("width %d\n", t->width); + DRM_ERROR("width_11 %d\n", t->width_11); DRM_ERROR("height %d\n", t->height); + DRM_ERROR("height_11 %d\n", t->height_11); DRM_ERROR("num levels %d\n", t->num_levels); DRM_ERROR("depth %d\n", t->txdepth); DRM_ERROR("bpp %d\n", t->cpp); @@ -2609,15 +2612,17 @@ static int r100_cs_track_texture_check(struct radeon_device *rdev, else w = track->textures[u].pitch / (1 << i); } else { - w = track->textures[u].width / (1 << i); + w = track->textures[u].width; if (rdev->family >= CHIP_RV515) w |= track->textures[u].width_11; + w = w / (1 << i); if (track->textures[u].roundup_w) w = roundup_pow_of_two(w); } - h = track->textures[u].height / (1 << i); + h = track->textures[u].height; if (rdev->family >= CHIP_RV515) h |= track->textures[u].height_11; + h = h / (1 << i); if (track->textures[u].roundup_h) h = roundup_pow_of_two(h); size += w * h; From 5885b7a9f4d2a0405b7e42d44eab4ed2302a8239 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 19 Oct 2009 17:23:33 -0400 Subject: [PATCH 045/743] drm/radeon/kms: fix vram_width calculation on r6xx/r7xx Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 29 +++++++++++++++++------------ drivers/gpu/drm/radeon/r600d.h | 4 ++++ drivers/gpu/drm/radeon/rv770.c | 30 ++++++++++++++++++++++++++---- drivers/gpu/drm/radeon/rv770d.h | 5 +++++ 4 files changed, 52 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 1b5aa1fd368b..e87475c87d52 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -339,11 +339,10 @@ int r600_mc_init(struct radeon_device *rdev) { fixed20_12 a; u32 tmp; - int chansize; + int chansize, numchan; int r; /* Get VRAM informations */ - rdev->mc.vram_width = 128; rdev->mc.vram_is_ddr = true; tmp = RREG32(RAMCFG); if (tmp & CHANSIZE_OVERRIDE) { @@ -353,17 +352,23 @@ int r600_mc_init(struct radeon_device *rdev) } else { chansize = 32; } - if (rdev->family == CHIP_R600) { - rdev->mc.vram_width = 8 * chansize; - } else if (rdev->family == CHIP_RV670) { - rdev->mc.vram_width = 4 * chansize; - } else if ((rdev->family == CHIP_RV610) || - (rdev->family == CHIP_RV620)) { - rdev->mc.vram_width = chansize; - } else if ((rdev->family == CHIP_RV630) || - (rdev->family == CHIP_RV635)) { - rdev->mc.vram_width = 2 * chansize; + tmp = RREG32(CHMAP); + switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) { + case 0: + default: + numchan = 1; + break; + case 1: + numchan = 2; + break; + case 2: + numchan = 4; + break; + case 3: + numchan = 8; + break; } + rdev->mc.vram_width = numchan * chansize; /* Could aper size report 0 ? */ rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index 5084595eb919..cf238bf5700f 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -270,6 +270,10 @@ #define PCIE_PORT_INDEX 0x0038 #define PCIE_PORT_DATA 0x003C +#define CHMAP 0x2004 +#define NOOFCHAN_SHIFT 12 +#define NOOFCHAN_MASK 0x00003000 + #define RAMCFG 0x2408 #define NOOFBANK_SHIFT 0 #define NOOFBANK_MASK 0x00000001 diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 595ac638039d..40553913b928 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -774,14 +774,36 @@ int rv770_mc_init(struct radeon_device *rdev) { fixed20_12 a; u32 tmp; + int chansize, numchan; int r; /* Get VRAM informations */ - /* FIXME: Don't know how to determine vram width, need to check - * vram_width usage - */ - rdev->mc.vram_width = 128; rdev->mc.vram_is_ddr = true; + tmp = RREG32(MC_ARB_RAMCFG); + if (tmp & CHANSIZE_OVERRIDE) { + chansize = 16; + } else if (tmp & CHANSIZE_MASK) { + chansize = 64; + } else { + chansize = 32; + } + tmp = RREG32(MC_SHARED_CHMAP); + switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) { + case 0: + default: + numchan = 1; + break; + case 1: + numchan = 2; + break; + case 2: + numchan = 4; + break; + case 3: + numchan = 8; + break; + } + rdev->mc.vram_width = numchan * chansize; /* Could aper size report 0 ? */ rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); diff --git a/drivers/gpu/drm/radeon/rv770d.h b/drivers/gpu/drm/radeon/rv770d.h index 4b9c3d6396ff..a1367ab6f261 100644 --- a/drivers/gpu/drm/radeon/rv770d.h +++ b/drivers/gpu/drm/radeon/rv770d.h @@ -129,6 +129,10 @@ #define HDP_REG_COHERENCY_FLUSH_CNTL 0x54A0 #define HDP_TILING_CONFIG 0x2F3C +#define MC_SHARED_CHMAP 0x2004 +#define NOOFCHAN_SHIFT 12 +#define NOOFCHAN_MASK 0x00003000 + #define MC_ARB_RAMCFG 0x2760 #define NOOFBANK_SHIFT 0 #define NOOFBANK_MASK 0x00000003 @@ -142,6 +146,7 @@ #define CHANSIZE_MASK 0x00000100 #define BURSTLENGTH_SHIFT 9 #define BURSTLENGTH_MASK 0x00000200 +#define CHANSIZE_OVERRIDE (1 << 11) #define MC_VM_AGP_TOP 0x2028 #define MC_VM_AGP_BOT 0x202C #define MC_VM_AGP_BASE 0x2030 From 790cfb34ad645be3bf69265cb05d824aeabcfa11 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 23:26:09 -0400 Subject: [PATCH 046/743] drm/radeon/kms: add quirk for acer 5102 doesn't have a tv-out port Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 33 +++++++++++++++++-------- 1 file changed, 23 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 8298c990be7a..fcb9371bf057 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -1579,6 +1579,17 @@ static bool radeon_apply_legacy_quirks(struct drm_device *dev, return true; } +static bool radeon_apply_legacy_tv_quirks(struct drm_device *dev) +{ + /* Acer 5102 has non-existent TV port */ + if (dev->pdev->device == 0x5975 && + dev->pdev->subsystem_vendor == 0x1025 && + dev->pdev->subsystem_device == 0x009f) + return false; + + return true; +} + bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) { struct radeon_device *rdev = dev->dev_private; @@ -1896,16 +1907,18 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) combios_get_table_offset(dev, COMBIOS_TV_INFO_TABLE); if (tv_info) { if (RBIOS8(tv_info + 6) == 'T') { - radeon_add_legacy_encoder(dev, - radeon_get_encoder_id - (dev, - ATOM_DEVICE_TV1_SUPPORT, - 2), - ATOM_DEVICE_TV1_SUPPORT); - radeon_add_legacy_connector(dev, 6, - ATOM_DEVICE_TV1_SUPPORT, - DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + if (radeon_apply_legacy_tv_quirks(dev)) { + radeon_add_legacy_encoder(dev, + radeon_get_encoder_id + (dev, + ATOM_DEVICE_TV1_SUPPORT, + 2), + ATOM_DEVICE_TV1_SUPPORT); + radeon_add_legacy_connector(dev, 6, + ATOM_DEVICE_TV1_SUPPORT, + DRM_MODE_CONNECTOR_SVIDEO, + &ddc_i2c); + } } } } From bc293e58cb4095f2ad43fe672ae269e31d1a18e2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Mathias=20Fr=C3=B6hlich?= Date: Mon, 19 Oct 2009 17:49:49 -0400 Subject: [PATCH 047/743] drm/radeon/kms/atom: get better min pixel clock info Where supported use ulMinPixelClockPLL_Output rather than usMinPixelClockPLL_Output for pll_out_min. This seems to improve pll selection on some boards. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 79d4b771c770..cec67917179f 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -641,8 +641,12 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) le16_to_cpu(firmware_info->info.usReferenceClock); p1pll->reference_div = 0; - p1pll->pll_out_min = - le16_to_cpu(firmware_info->info.usMinPixelClockPLL_Output); + if (crev < 2) + p1pll->pll_out_min = + le16_to_cpu(firmware_info->info.usMinPixelClockPLL_Output); + else + p1pll->pll_out_min = + le32_to_cpu(firmware_info->info_12.ulMinPixelClockPLL_Output); p1pll->pll_out_max = le32_to_cpu(firmware_info->info.ulMaxPixelClockPLL_Output); From c54b1820d69a1043acaf50d084852e628266e0e2 Mon Sep 17 00:00:00 2001 From: Robert Noland Date: Tue, 20 Oct 2009 08:11:36 -0500 Subject: [PATCH 048/743] drm/radeon/r600: Replace repeated calculations with variable. - Reduce the chance of error and avoid a bit of overhead. - Use switch to assign color and format Signed-off-by: Robert Noland Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_blit.c | 52 ++++++++++++++++++------------ 1 file changed, 31 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c index d988eece0187..626a9ab7075a 100644 --- a/drivers/gpu/drm/radeon/r600_blit.c +++ b/drivers/gpu/drm/radeon/r600_blit.c @@ -774,6 +774,7 @@ r600_blit_swap(struct drm_device *dev, { drm_radeon_private_t *dev_priv = dev->dev_private; int cb_format, tex_format; + int sx2, sy2, dx2, dy2; u64 vb_addr; u32 *vb; @@ -790,16 +791,10 @@ r600_blit_swap(struct drm_device *dev, vb = r600_nomm_get_vb_ptr(dev); } - if (cpp == 4) { - cb_format = COLOR_8_8_8_8; - tex_format = FMT_8_8_8_8; - } else if (cpp == 2) { - cb_format = COLOR_5_6_5; - tex_format = FMT_5_6_5; - } else { - cb_format = COLOR_8; - tex_format = FMT_8; - } + sx2 = sx + w; + sy2 = sy + h; + dx2 = dx + w; + dy2 = dy + h; vb[0] = i2f(dx); vb[1] = i2f(dy); @@ -807,31 +802,46 @@ r600_blit_swap(struct drm_device *dev, vb[3] = i2f(sy); vb[4] = i2f(dx); - vb[5] = i2f(dy + h); + vb[5] = i2f(dy2); vb[6] = i2f(sx); - vb[7] = i2f(sy + h); + vb[7] = i2f(sy2); - vb[8] = i2f(dx + w); - vb[9] = i2f(dy + h); - vb[10] = i2f(sx + w); - vb[11] = i2f(sy + h); + vb[8] = i2f(dx2); + vb[9] = i2f(dy2); + vb[10] = i2f(sx2); + vb[11] = i2f(sy2); + + switch(cpp) { + case 4: + cb_format = COLOR_8_8_8_8; + tex_format = FMT_8_8_8_8; + break; + case 2: + cb_format = COLOR_5_6_5; + tex_format = FMT_5_6_5; + break; + default: + cb_format = COLOR_8; + tex_format = FMT_8; + break; + } /* src */ set_tex_resource(dev_priv, tex_format, src_pitch / cpp, - sy + h, src_pitch / cpp, + sy2, src_pitch / cpp, src_gpu_addr); cp_set_surface_sync(dev_priv, - R600_TC_ACTION_ENA, (src_pitch * (sy + h)), src_gpu_addr); + R600_TC_ACTION_ENA, src_pitch * sy2, src_gpu_addr); /* dst */ set_render_target(dev_priv, cb_format, - dst_pitch / cpp, dy + h, + dst_pitch / cpp, dy2, dst_gpu_addr); /* scissors */ - set_scissors(dev_priv, dx, dy, dx + w, dy + h); + set_scissors(dev_priv, dx, dy, dx2, dy2); /* Vertex buffer setup */ vb_addr = dev_priv->gart_buffers_offset + @@ -844,7 +854,7 @@ r600_blit_swap(struct drm_device *dev, cp_set_surface_sync(dev_priv, R600_CB_ACTION_ENA | R600_CB0_DEST_BASE_ENA, - dst_pitch * (dy + h), dst_gpu_addr); + dst_pitch * dy2, dst_gpu_addr); dev_priv->blit_vb->used += 12 * 4; } From 33fdb15c99aac20d238af487fa363d3e5c7ed197 Mon Sep 17 00:00:00 2001 From: Robert Noland Date: Tue, 20 Oct 2009 13:07:38 -0500 Subject: [PATCH 049/743] drm/radeon/r600: only assign vb after we know space is available. This patch only changes this is the swap path, where it doesn't loop. Signed-off-by: Robert Noland Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_blit.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c index 626a9ab7075a..5ea432347589 100644 --- a/drivers/gpu/drm/radeon/r600_blit.c +++ b/drivers/gpu/drm/radeon/r600_blit.c @@ -778,8 +778,6 @@ r600_blit_swap(struct drm_device *dev, u64 vb_addr; u32 *vb; - vb = r600_nomm_get_vb_ptr(dev); - if ((dev_priv->blit_vb->used + 48) > dev_priv->blit_vb->total) { r600_nomm_put_vb(dev); @@ -788,8 +786,8 @@ r600_blit_swap(struct drm_device *dev, return; set_shaders(dev); - vb = r600_nomm_get_vb_ptr(dev); } + vb = r600_nomm_get_vb_ptr(dev); sx2 = sx + w; sy2 = sy + h; From c290dadf4cac25cc91529d84004795ab43fc0821 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 22 Oct 2009 16:12:34 -0400 Subject: [PATCH 050/743] drm/radeon/kms/r7xx: add regs for 40 bit CUR/GRPH addresses The *_HIGH regs are reversed. The secondary ones are in the primary block and vice versa. We currently only use a 32 bit internal address, so these are 0 for now. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 10 ++++++++++ drivers/gpu/drm/radeon/r500_reg.h | 9 +++++++++ drivers/gpu/drm/radeon/radeon_cursor.c | 10 ++++++++-- 3 files changed, 27 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index f7dcb6916837..9c26e538a1e0 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -577,6 +577,16 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y, WREG32(AVIVO_D1VGA_CONTROL, 0); else WREG32(AVIVO_D2VGA_CONTROL, 0); + + if (rdev->family >= CHIP_RV770) { + if (radeon_crtc->crtc_id) { + WREG32(R700_D2GRPH_PRIMARY_SURFACE_ADDRESS_HIGH, 0); + WREG32(R700_D2GRPH_SECONDARY_SURFACE_ADDRESS_HIGH, 0); + } else { + WREG32(R700_D1GRPH_PRIMARY_SURFACE_ADDRESS_HIGH, 0); + WREG32(R700_D1GRPH_SECONDARY_SURFACE_ADDRESS_HIGH, 0); + } + } WREG32(AVIVO_D1GRPH_PRIMARY_SURFACE_ADDRESS + radeon_crtc->crtc_offset, (u32) fb_location); WREG32(AVIVO_D1GRPH_SECONDARY_SURFACE_ADDRESS + diff --git a/drivers/gpu/drm/radeon/r500_reg.h b/drivers/gpu/drm/radeon/r500_reg.h index 868add6e166d..7baa73955563 100644 --- a/drivers/gpu/drm/radeon/r500_reg.h +++ b/drivers/gpu/drm/radeon/r500_reg.h @@ -384,9 +384,16 @@ # define AVIVO_D1GRPH_TILED (1 << 20) # define AVIVO_D1GRPH_MACRO_ADDRESS_MODE (1 << 21) +/* The R7xx *_HIGH surface regs are backwards; the D1 regs are in the D2 + * block and vice versa. This applies to GRPH, CUR, etc. + */ #define AVIVO_D1GRPH_LUT_SEL 0x6108 #define AVIVO_D1GRPH_PRIMARY_SURFACE_ADDRESS 0x6110 +#define R700_D1GRPH_PRIMARY_SURFACE_ADDRESS_HIGH 0x6914 +#define R700_D2GRPH_PRIMARY_SURFACE_ADDRESS_HIGH 0x6114 #define AVIVO_D1GRPH_SECONDARY_SURFACE_ADDRESS 0x6118 +#define R700_D1GRPH_SECONDARY_SURFACE_ADDRESS_HIGH 0x691c +#define R700_D2GRPH_SECONDARY_SURFACE_ADDRESS_HIGH 0x611c #define AVIVO_D1GRPH_PITCH 0x6120 #define AVIVO_D1GRPH_SURFACE_OFFSET_X 0x6124 #define AVIVO_D1GRPH_SURFACE_OFFSET_Y 0x6128 @@ -404,6 +411,8 @@ # define AVIVO_D1CURSOR_MODE_MASK (3 << 8) # define AVIVO_D1CURSOR_MODE_24BPP 2 #define AVIVO_D1CUR_SURFACE_ADDRESS 0x6408 +#define R700_D1CUR_SURFACE_ADDRESS_HIGH 0x6c0c +#define R700_D2CUR_SURFACE_ADDRESS_HIGH 0x640c #define AVIVO_D1CUR_SIZE 0x6410 #define AVIVO_D1CUR_POSITION 0x6414 #define AVIVO_D1CUR_HOT_SPOT 0x6418 diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c index b13c79e38bc0..28772a37009c 100644 --- a/drivers/gpu/drm/radeon/radeon_cursor.c +++ b/drivers/gpu/drm/radeon/radeon_cursor.c @@ -109,9 +109,15 @@ static void radeon_set_cursor(struct drm_crtc *crtc, struct drm_gem_object *obj, struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct radeon_device *rdev = crtc->dev->dev_private; - if (ASIC_IS_AVIVO(rdev)) + if (ASIC_IS_AVIVO(rdev)) { + if (rdev->family >= CHIP_RV770) { + if (radeon_crtc->crtc_id) + WREG32(R700_D2CUR_SURFACE_ADDRESS_HIGH, 0); + else + WREG32(R700_D1CUR_SURFACE_ADDRESS_HIGH, 0); + } WREG32(AVIVO_D1CUR_SURFACE_ADDRESS + radeon_crtc->crtc_offset, gpu_addr); - else { + } else { radeon_crtc->legacy_cursor_offset = gpu_addr - radeon_crtc->legacy_display_base_addr; /* offset is from DISP(2)_BASE_ADDRESS */ WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, radeon_crtc->legacy_cursor_offset); From ebbe1cb936dfc96d809ccf4d64a9755f8ba0c0ff Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 16 Oct 2009 11:15:25 -0400 Subject: [PATCH 051/743] drm/radeon/kms/atom: add support for spread spectrum (v2) Spread spectrum is a periodic disturbance added to the feedback divider to change the pixel clock periodically to reduce interference. Only enabled on LVDS. v2: add support for r4xx and fix DCE 3 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios.h | 2 +- drivers/gpu/drm/radeon/atombios_crtc.c | 68 ++++++++++++++++++++---- drivers/gpu/drm/radeon/radeon_atombios.c | 42 +++++++++++++++ drivers/gpu/drm/radeon/radeon_mode.h | 11 ++++ 4 files changed, 111 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index 5d402086bc47..c11ddddfb3b6 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -2314,7 +2314,7 @@ typedef struct _ATOM_SPREAD_SPECTRUM_ASSIGNMENT { UCHAR ucSS_Step; UCHAR ucSS_Delay; UCHAR ucSS_Id; - UCHAR ucRecommandedRef_Div; + UCHAR ucRecommendedRef_Div; UCHAR ucSS_Range; /* it was reserved for V11 */ } ATOM_SPREAD_SPECTRUM_ASSIGNMENT; diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 9c26e538a1e0..e5a3c301b7a9 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -351,6 +351,61 @@ static void atombios_crtc_set_timing(struct drm_crtc *crtc, atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } +static void atombios_set_ss(struct drm_crtc *crtc, int enable) +{ + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); + struct drm_device *dev = crtc->dev; + struct radeon_device *rdev = dev->dev_private; + struct drm_encoder *encoder = NULL; + struct radeon_encoder *radeon_encoder = NULL; + struct radeon_encoder_atom_dig *dig = NULL; + int index = GetIndexIntoMasterTable(COMMAND, EnableSpreadSpectrumOnPPLL); + ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION args; + ENABLE_LVDS_SS_PARAMETERS legacy_args; + uint16_t percentage = 0; + uint8_t type = 0, step = 0, delay = 0, range = 0; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + if (encoder->crtc == crtc) { + radeon_encoder = to_radeon_encoder(encoder); + dig = radeon_encoder->enc_priv; + /* only enable spread spectrum on LVDS */ + if (dig && dig->ss) { + percentage = dig->ss->percentage; + type = dig->ss->type; + step = dig->ss->step; + delay = dig->ss->delay; + range = dig->ss->range; + } else if (enable) + return; + break; + } + } + + if (!radeon_encoder) + return; + + if (ASIC_IS_AVIVO(rdev)) { + memset(&args, 0, sizeof(args)); + args.usSpreadSpectrumPercentage = percentage; + args.ucSpreadSpectrumType = type; + args.ucSpreadSpectrumStep = step; + args.ucSpreadSpectrumDelay = delay; + args.ucSpreadSpectrumRange = range; + args.ucPpll = radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1; + args.ucEnable = enable; + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + } else { + memset(&legacy_args, 0, sizeof(legacy_args)); + legacy_args.usSpreadSpectrumPercentage = percentage; + legacy_args.ucSpreadSpectrumType = type; + legacy_args.ucSpreadSpectrumStepSize_Delay = (step & 3) << 2; + legacy_args.ucSpreadSpectrumStepSize_Delay |= (delay & 7) << 4; + legacy_args.ucEnable = enable; + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&legacy_args); + } +} + void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) { struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); @@ -373,8 +428,6 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) memset(&args, 0, sizeof(args)); if (ASIC_IS_AVIVO(rdev)) { - uint32_t ss_cntl; - if ((rdev->family == CHIP_RS600) || (rdev->family == CHIP_RS690) || (rdev->family == CHIP_RS740)) @@ -385,15 +438,6 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV; else pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV; - - /* disable spread spectrum clocking for now -- thanks Hedy Lamarr */ - if (radeon_crtc->crtc_id == 0) { - ss_cntl = RREG32(AVIVO_P1PLL_INT_SS_CNTL); - WREG32(AVIVO_P1PLL_INT_SS_CNTL, ss_cntl & ~1); - } else { - ss_cntl = RREG32(AVIVO_P2PLL_INT_SS_CNTL); - WREG32(AVIVO_P2PLL_INT_SS_CNTL, ss_cntl & ~1); - } } else { pll_flags |= RADEON_PLL_LEGACY; @@ -641,7 +685,9 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc, /* TODO color tiling */ + atombios_set_ss(crtc, 0); atombios_crtc_set_pll(crtc, adjusted_mode); + atombios_set_ss(crtc, 1); atombios_crtc_set_timing(crtc, adjusted_mode); if (ASIC_IS_AVIVO(rdev)) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index cec67917179f..18729259c2fc 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -771,6 +771,46 @@ bool radeon_atombios_get_tmds_info(struct radeon_encoder *encoder, return false; } +static struct radeon_atom_ss *radeon_atombios_get_ss_info(struct + radeon_encoder + *encoder, + int id) +{ + struct drm_device *dev = encoder->base.dev; + struct radeon_device *rdev = dev->dev_private; + struct radeon_mode_info *mode_info = &rdev->mode_info; + int index = GetIndexIntoMasterTable(DATA, PPLL_SS_Info); + uint16_t data_offset; + struct _ATOM_SPREAD_SPECTRUM_INFO *ss_info; + uint8_t frev, crev; + struct radeon_atom_ss *ss = NULL; + + if (id > ATOM_MAX_SS_ENTRY) + return NULL; + + atom_parse_data_header(mode_info->atom_context, index, NULL, &frev, + &crev, &data_offset); + + ss_info = + (struct _ATOM_SPREAD_SPECTRUM_INFO *)(mode_info->atom_context->bios + data_offset); + + if (ss_info) { + ss = + kzalloc(sizeof(struct radeon_atom_ss), GFP_KERNEL); + + if (!ss) + return NULL; + + ss->percentage = le16_to_cpu(ss_info->asSS_Info[id].usSpreadSpectrumPercentage); + ss->type = ss_info->asSS_Info[id].ucSpreadSpectrumType; + ss->step = ss_info->asSS_Info[id].ucSS_Step; + ss->delay = ss_info->asSS_Info[id].ucSS_Delay; + ss->range = ss_info->asSS_Info[id].ucSS_Range; + ss->refdiv = ss_info->asSS_Info[id].ucRecommendedRef_Div; + } + return ss; +} + union lvds_info { struct _ATOM_LVDS_INFO info; struct _ATOM_LVDS_INFO_V12 info_12; @@ -826,6 +866,8 @@ struct radeon_encoder_atom_dig *radeon_atombios_get_lvds_info(struct /* set crtc values */ drm_mode_set_crtcinfo(&lvds->native_mode, CRTC_INTERLACE_HALVE_V); + lvds->ss = radeon_atombios_get_ss_info(encoder, lvds_info->info.ucSS_Id); + encoder->native_mode = lvds->native_mode; } return lvds; diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index b6868fbe7346..2ea5707c018c 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -260,6 +260,16 @@ struct radeon_encoder_int_tmds { struct radeon_tmds_pll tmds_pll[4]; }; +/* spread spectrum */ +struct radeon_atom_ss { + uint16_t percentage; + uint8_t type; + uint8_t step; + uint8_t delay; + uint8_t range; + uint8_t refdiv; +}; + struct radeon_encoder_atom_dig { /* atom dig */ bool coherent_mode; @@ -267,6 +277,7 @@ struct radeon_encoder_atom_dig { /* atom lvds */ uint32_t lvds_misc; uint16_t panel_pwr_delay; + struct radeon_atom_ss *ss; /* panel mode */ struct drm_display_mode native_mode; }; From 3e5cb98dfe87cc61d0a1119dd8aa2b1e4cfab424 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 16 Oct 2009 12:21:24 -0400 Subject: [PATCH 052/743] drm/radeon/kms: add support for msi Try to enable msi on chips that support it. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 17 ++++++++++++++++- drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/radeon_irq_kms.c | 9 +++++++++ drivers/gpu/drm/radeon/radeon_reg.h | 6 ++++++ drivers/gpu/drm/radeon/rs600.c | 18 +++++++++++++++++- 5 files changed, 49 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index ed5e983d21e9..b438b520ee7f 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -186,7 +186,7 @@ static inline uint32_t r100_irq_ack(struct radeon_device *rdev) int r100_irq_process(struct radeon_device *rdev) { - uint32_t status; + uint32_t status, msi_rearm; status = r100_irq_ack(rdev); if (!status) { @@ -209,6 +209,21 @@ int r100_irq_process(struct radeon_device *rdev) } status = r100_irq_ack(rdev); } + if (rdev->msi_enabled) { + switch (rdev->family) { + case CHIP_RS400: + case CHIP_RS480: + msi_rearm = RREG32(RADEON_AIC_CNTL) & ~RS400_MSI_REARM; + WREG32(RADEON_AIC_CNTL, msi_rearm); + WREG32(RADEON_AIC_CNTL, msi_rearm | RS400_MSI_REARM); + break; + default: + msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN; + WREG32(RADEON_MSI_REARM_EN, msi_rearm); + WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN); + break; + } + } return IRQ_HANDLED; } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 8b60e36b20ba..ea3efd7ae85b 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -784,6 +784,7 @@ struct radeon_device { const struct firmware *me_fw; /* all family ME firmware */ const struct firmware *pfp_fw; /* r6/700 PFP firmware */ struct r600_blit r600_blit; + int msi_enabled; /* msi enabled */ }; int radeon_device_init(struct radeon_device *rdev, diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c index 8e0a8759e428..a0fe6232dcb6 100644 --- a/drivers/gpu/drm/radeon/radeon_irq_kms.c +++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c @@ -92,6 +92,13 @@ int radeon_irq_kms_init(struct radeon_device *rdev) if (r) { return r; } + /* enable msi */ + rdev->msi_enabled = 0; + if (rdev->family >= CHIP_RV380) { + int ret = pci_enable_msi(rdev->pdev); + if (!ret) + rdev->msi_enabled = 1; + } drm_irq_install(rdev->ddev); rdev->irq.installed = true; DRM_INFO("radeon: irq initialized.\n"); @@ -103,5 +110,7 @@ void radeon_irq_kms_fini(struct radeon_device *rdev) if (rdev->irq.installed) { rdev->irq.installed = false; drm_irq_uninstall(rdev->ddev); + if (rdev->msi_enabled) + pci_disable_msi(rdev->pdev); } } diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h index bfa1ab9c93e1..29ab75903ec1 100644 --- a/drivers/gpu/drm/radeon/radeon_reg.h +++ b/drivers/gpu/drm/radeon/radeon_reg.h @@ -290,6 +290,8 @@ #define RADEON_BUS_CNTL 0x0030 # define RADEON_BUS_MASTER_DIS (1 << 6) # define RADEON_BUS_BIOS_DIS_ROM (1 << 12) +# define RS600_BUS_MASTER_DIS (1 << 14) +# define RS600_MSI_REARM (1 << 20) /* rs600/rs690/rs740 */ # define RADEON_BUS_RD_DISCARD_EN (1 << 24) # define RADEON_BUS_RD_ABORT_EN (1 << 25) # define RADEON_BUS_MSTR_DISCONNECT_EN (1 << 28) @@ -297,6 +299,9 @@ # define RADEON_BUS_READ_BURST (1 << 30) #define RADEON_BUS_CNTL1 0x0034 # define RADEON_BUS_WAIT_ON_LOCK_EN (1 << 4) +/* rv370/rv380, rv410, r423/r430/r480, r5xx */ +#define RADEON_MSI_REARM_EN 0x0160 +# define RV370_MSI_REARM_EN (1 << 0) /* #define RADEON_PCIE_INDEX 0x0030 */ /* #define RADEON_PCIE_DATA 0x0034 */ @@ -3311,6 +3316,7 @@ #define RADEON_AIC_CNTL 0x01d0 # define RADEON_PCIGART_TRANSLATE_EN (1 << 0) # define RADEON_DIS_OUT_OF_PCI_GART_ACCESS (1 << 1) +# define RS400_MSI_REARM (1 << 3) /* rs400/rs480 */ #define RADEON_AIC_LO_ADDR 0x01dc #define RADEON_AIC_PT_BASE 0x01d8 #define RADEON_AIC_HI_ADDR 0x01e0 diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 10dfa78762da..942754c39be9 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -242,7 +242,7 @@ void rs600_irq_disable(struct radeon_device *rdev) int rs600_irq_process(struct radeon_device *rdev) { - uint32_t status; + uint32_t status, msi_rearm; uint32_t r500_disp_int; status = rs600_irq_ack(rdev, &r500_disp_int); @@ -260,6 +260,22 @@ int rs600_irq_process(struct radeon_device *rdev) drm_handle_vblank(rdev->ddev, 1); status = rs600_irq_ack(rdev, &r500_disp_int); } + if (rdev->msi_enabled) { + switch (rdev->family) { + case CHIP_RS600: + case CHIP_RS690: + case CHIP_RS740: + msi_rearm = RREG32(RADEON_BUS_CNTL) & ~RS600_MSI_REARM; + WREG32(RADEON_BUS_CNTL, msi_rearm); + WREG32(RADEON_BUS_CNTL, msi_rearm | RS600_MSI_REARM); + break; + default: + msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN; + WREG32(RADEON_MSI_REARM_EN, msi_rearm); + WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN); + break; + } + } return IRQ_HANDLED; } From 8f552a66a40bcc6e903e91310f42fe140e0342c4 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 27 Oct 2009 11:16:09 -0400 Subject: [PATCH 053/743] drm/radeon/kms/atom: loosen pll min output limits Limiting the pll output range is a good thing generally as it limits the number of possible pll combinations for a given frequency presumably to the ones that work best on each card. That's why the limits are in the bios tables. However, certain duallink DVI monitors seem to like pll combinations that would be limited by this at least on pre-DCE 3.0 r6xx hardware. This might need to be adjusted per family or per clock range in the future. See fdo bug 24727. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 18729259c2fc..1c9a9c461762 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -655,6 +655,16 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) p1pll->pll_out_min = 64800; else p1pll->pll_out_min = 20000; + } else if (p1pll->pll_out_min > 64800) { + /* Limiting the pll output range is a good thing generally as + * it limits the number of possible pll combinations for a given + * frequency presumably to the ones that work best on each card. + * However, certain duallink DVI monitors seem to like + * pll combinations that would be limited by this at least on + * pre-DCE 3.0 r6xx hardware. This might need to be adjusted per + * family. + */ + p1pll->pll_out_min = 64800; } p1pll->pll_in_min = From d56ef9c8fd34ed29ffae27598a864b4a9a82521b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 27 Oct 2009 12:11:09 -0400 Subject: [PATCH 054/743] drm/radeon/kms/atom: Fix DVO support DVO in 12 bit mode (which seems to be the most common config) requires 2x ppll. Fixes fdo bug 21857. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index e5a3c301b7a9..8516e1b2329a 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -483,8 +483,14 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&adjust_pll_args); adjusted_clock = le16_to_cpu(adjust_pll_args.usPixelClock) * 10; - } else - adjusted_clock = mode->clock; + } else { + /* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */ + if (ASIC_IS_AVIVO(rdev) && + (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1)) + adjusted_clock = mode->clock * 2; + else + adjusted_clock = mode->clock; + } if (radeon_crtc->crtc_id == 0) pll = &rdev->clock.p1pll; From 61c4b24b3e3bb83bfe29f24fe566281b4f722237 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Mathias=20Fr=C3=B6hlich?= Date: Tue, 27 Oct 2009 15:08:01 -0400 Subject: [PATCH 055/743] drm/radeon/kms/atom: Make card_info per device Make the struct card_info, which is a per struct radeon_device dataset, a struct member of the radeon device instead of a static per kernel module value. This should avoid potential problems with two radeon cards installed in one system. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_device.c | 29 +++++++++++++++----------- drivers/gpu/drm/radeon/radeon_mode.h | 1 + 2 files changed, 18 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index d1cdda9b5586..88c19070247f 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -443,20 +443,24 @@ static uint32_t cail_reg_read(struct card_info *info, uint32_t reg) return r; } -static struct card_info atom_card_info = { - .dev = NULL, - .reg_read = cail_reg_read, - .reg_write = cail_reg_write, - .mc_read = cail_mc_read, - .mc_write = cail_mc_write, - .pll_read = cail_pll_read, - .pll_write = cail_pll_write, -}; - int radeon_atombios_init(struct radeon_device *rdev) { - atom_card_info.dev = rdev->ddev; - rdev->mode_info.atom_context = atom_parse(&atom_card_info, rdev->bios); + struct card_info *atom_card_info = + kzalloc(sizeof(struct card_info), GFP_KERNEL); + + if (!atom_card_info) + return -ENOMEM; + + rdev->mode_info.atom_card_info = atom_card_info; + atom_card_info->dev = rdev->ddev; + atom_card_info->reg_read = cail_reg_read; + atom_card_info->reg_write = cail_reg_write; + atom_card_info->mc_read = cail_mc_read; + atom_card_info->mc_write = cail_mc_write; + atom_card_info->pll_read = cail_pll_read; + atom_card_info->pll_write = cail_pll_write; + + rdev->mode_info.atom_context = atom_parse(atom_card_info, rdev->bios); radeon_atom_initialize_bios_scratch_regs(rdev->ddev); return 0; } @@ -464,6 +468,7 @@ int radeon_atombios_init(struct radeon_device *rdev) void radeon_atombios_fini(struct radeon_device *rdev) { kfree(rdev->mode_info.atom_context); + kfree(rdev->mode_info.atom_card_info); } int radeon_combios_init(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 2ea5707c018c..ccb783868ad6 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -172,6 +172,7 @@ enum radeon_connector_table { struct radeon_mode_info { struct atom_context *atom_context; + struct card_info *atom_card_info; enum radeon_connector_table connector_table; bool mode_config_initialized; struct radeon_crtc *crtcs[2]; From a2d49ae7df5b96fba3c63710df61412587fc6a24 Mon Sep 17 00:00:00 2001 From: James Simmons Date: Tue, 27 Oct 2009 21:09:24 +0000 Subject: [PATCH 056/743] drm/kms: typo fix I believe this is a typo. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 9c924614c418..dc8e374a0b55 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -707,7 +707,7 @@ int drm_fb_helper_set_par(struct fb_info *info) if (crtc->fb == fb_helper->crtc_info[i].mode_set.fb) { mutex_lock(&dev->mode_config.mutex); - ret = crtc->funcs->set_config(&fb_helper->crtc_info->mode_set); + ret = crtc->funcs->set_config(&fb_helper->crtc_info[i].mode_set); mutex_unlock(&dev->mode_config.mutex); if (ret) return ret; From d11aa88b33b071d55181a7a482b9e7494888c10e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 Oct 2009 00:51:20 -0400 Subject: [PATCH 057/743] drm/radeon/kms/atom: fix potential oops in spread spectrum code Make sure we have an LVDS encoder before casting enc_priv. [airlied: also fix two missing cpu_to_le16 casts we noticed on irc] Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 8516e1b2329a..c15287a590ff 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -368,14 +368,17 @@ static void atombios_set_ss(struct drm_crtc *crtc, int enable) list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { if (encoder->crtc == crtc) { radeon_encoder = to_radeon_encoder(encoder); - dig = radeon_encoder->enc_priv; /* only enable spread spectrum on LVDS */ - if (dig && dig->ss) { - percentage = dig->ss->percentage; - type = dig->ss->type; - step = dig->ss->step; - delay = dig->ss->delay; - range = dig->ss->range; + if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { + dig = radeon_encoder->enc_priv; + if (dig && dig->ss) { + percentage = dig->ss->percentage; + type = dig->ss->type; + step = dig->ss->step; + delay = dig->ss->delay; + range = dig->ss->range; + } else if (enable) + return; } else if (enable) return; break; @@ -387,7 +390,7 @@ static void atombios_set_ss(struct drm_crtc *crtc, int enable) if (ASIC_IS_AVIVO(rdev)) { memset(&args, 0, sizeof(args)); - args.usSpreadSpectrumPercentage = percentage; + args.usSpreadSpectrumPercentage = cpu_to_le16(percentage); args.ucSpreadSpectrumType = type; args.ucSpreadSpectrumStep = step; args.ucSpreadSpectrumDelay = delay; @@ -397,7 +400,7 @@ static void atombios_set_ss(struct drm_crtc *crtc, int enable) atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } else { memset(&legacy_args, 0, sizeof(legacy_args)); - legacy_args.usSpreadSpectrumPercentage = percentage; + legacy_args.usSpreadSpectrumPercentage = cpu_to_le16(percentage); legacy_args.ucSpreadSpectrumType = type; legacy_args.ucSpreadSpectrumStepSize_Delay = (step & 3) << 2; legacy_args.ucSpreadSpectrumStepSize_Delay |= (delay & 7) << 4; From fc7f7119d2ed97fff1aaddad6bf7d61ed446cf37 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 Oct 2009 01:46:54 -0400 Subject: [PATCH 058/743] drm/radeon/kms: add quirk for hp dc5750 Doesn't have a tv-out port Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index fcb9371bf057..a36ede002ee4 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -1587,6 +1587,12 @@ static bool radeon_apply_legacy_tv_quirks(struct drm_device *dev) dev->pdev->subsystem_device == 0x009f) return false; + /* HP dc5750 has non-existent TV port */ + if (dev->pdev->device == 0x5974 && + dev->pdev->subsystem_vendor == 0x103c && + dev->pdev->subsystem_device == 0x280a) + return false; + return true; } From ea1495a6274c9542a168337536f8ce74d1173f23 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 27 Oct 2009 11:57:53 +1100 Subject: [PATCH 059/743] drm/radeon/kms: fix rc410 suspend/resume. This fixes suspend/resume on my rc410 motherboard, it restores the memory controller setup before posting the GPU, since it seems to need the MC_FB_LOCATION setup correctly. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/rs400.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index a769c296f6a6..ca037160a582 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -418,6 +418,8 @@ int rs400_resume(struct radeon_device *rdev) rs400_gart_disable(rdev); /* Resume clock before doing reset */ r300_clock_startup(rdev); + /* setup MC before calling post tables */ + rs400_mc_program(rdev); /* Reset gpu before posting otherwise ATOM will enter infinite loop */ if (radeon_gpu_reset(rdev)) { dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n", From 52a2b11cafb1b14bacfc65a20966da5ba3a863e1 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Thu, 1 Oct 2009 15:48:40 -0700 Subject: [PATCH 060/743] ACPI: clean up video.c boundary checks and types proc.c and video.c are a bit sloppy around types and style, confusing gcc for a new feature that'll be in 2.6.33 and will cause a warning on the current code. This patch changes if (foo + 1 > sizeof bar) into if (foo >= sizeof(bar)) which is more kernel-style. it also changes a variable in proc.c to unsigned; it gets assigned a value from an unsigned type, and is then only compared for > not for negative, so using unsigned is just outright the right type Signed-off-by: Arjan van de Ven Signed-off-by: Len Brown --- drivers/acpi/proc.c | 2 +- drivers/acpi/video.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c index f8b6f555ba52..d0d25e2e1ced 100644 --- a/drivers/acpi/proc.c +++ b/drivers/acpi/proc.c @@ -393,7 +393,7 @@ acpi_system_write_wakeup_device(struct file *file, struct list_head *node, *next; char strbuf[5]; char str[5] = ""; - int len = count; + unsigned int len = count; struct acpi_device *found_dev = NULL; if (len > 4) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 64e3c581b7a9..05dff631591c 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1223,7 +1223,7 @@ acpi_video_device_write_state(struct file *file, u32 state = 0; - if (!dev || count + 1 > sizeof str) + if (!dev || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) @@ -1280,7 +1280,7 @@ acpi_video_device_write_brightness(struct file *file, int i; - if (!dev || !dev->brightness || count + 1 > sizeof str) + if (!dev || !dev->brightness || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) @@ -1562,7 +1562,7 @@ acpi_video_bus_write_POST(struct file *file, unsigned long long opt, options; - if (!video || count + 1 > sizeof str) + if (!video || count >= sizeof(str)) return -EINVAL; status = acpi_video_bus_POST_options(video, &options); @@ -1602,7 +1602,7 @@ acpi_video_bus_write_DOS(struct file *file, unsigned long opt; - if (!video || count + 1 > sizeof str) + if (!video || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) From ca0207114f1708b563f510b7781a360ec5b98359 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 28 Oct 2009 18:02:26 +0100 Subject: [PATCH 061/743] x86/amd-iommu: Un__init function required on shutdown The function iommu_feature_disable is required on system shutdown to disable the IOMMU but it is marked as __init. This may result in a panic if the memory is reused. This patch fixes this bug. Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 498c8c79aaa5..1e423b2add15 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -240,7 +240,7 @@ static void iommu_feature_enable(struct amd_iommu *iommu, u8 bit) writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET); } -static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit) +static void iommu_feature_disable(struct amd_iommu *iommu, u8 bit) { u32 ctrl; From fb5cbe9efd741b16e72133613747f76490bbecd3 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Wed, 28 Oct 2009 22:28:24 -0700 Subject: [PATCH 062/743] ocfs2: Return -EINVAL when a device is not ocfs2. In case of non-modular kernels the root filesystem is mounted by trying several filesystems. If ocfs2 was tried before the actual filesystem type, the mount would fail because ocfs2_sb_probe() returns -EAGAIN instead of -EINVAL. ocfs2 will now return -EINVAL properly. Signed-off-by: Joel Becker Reported-by: Laszlo Attila Toth --- fs/ocfs2/super.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index c0e48aeebb1c..960673004df1 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -773,18 +773,20 @@ static int ocfs2_sb_probe(struct super_block *sb, if (tmpstat < 0) { status = tmpstat; mlog_errno(status); - goto bail; + break; } di = (struct ocfs2_dinode *) (*bh)->b_data; memset(stats, 0, sizeof(struct ocfs2_blockcheck_stats)); spin_lock_init(&stats->b_lock); - status = ocfs2_verify_volume(di, *bh, blksize, stats); - if (status >= 0) - goto bail; - brelse(*bh); - *bh = NULL; - if (status != -EAGAIN) + tmpstat = ocfs2_verify_volume(di, *bh, blksize, stats); + if (tmpstat < 0) { + brelse(*bh); + *bh = NULL; + } + if (tmpstat != -EAGAIN) { + status = tmpstat; break; + } } bail: From 87f4b1bb98696e6cf84f57df7de41f28c2a7dbeb Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Thu, 15 Oct 2009 11:10:48 +0800 Subject: [PATCH 063/743] ocfs2: Move ocfs2_complete_reflink to the right place. As its name ocfs2_complete_reflink indicates, it should be called after all the work for reflink is done, so it really should be called after we reflink xattr successfully. Signed-off-by: Tao Ma Signed-off-by: Joel Becker Tested-by: Tristan Ye --- fs/ocfs2/refcounttree.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c index 60287fc56bcb..9d439b277304 100644 --- a/fs/ocfs2/refcounttree.c +++ b/fs/ocfs2/refcounttree.c @@ -4013,10 +4013,6 @@ static int ocfs2_create_reflink_node(struct inode *s_inode, goto out_unlock_refcount; } - ret = ocfs2_complete_reflink(s_inode, s_bh, t_inode, t_bh, preserve); - if (ret) - mlog_errno(ret); - out_unlock_refcount: ocfs2_unlock_refcount_tree(osb, ref_tree, 1); brelse(ref_root_bh); @@ -4068,9 +4064,17 @@ static int __ocfs2_reflink(struct dentry *old_dentry, ret = ocfs2_reflink_xattrs(inode, old_bh, new_inode, new_bh, preserve); - if (ret) + if (ret) { mlog_errno(ret); + goto inode_unlock; + } } + + ret = ocfs2_complete_reflink(inode, old_bh, + new_inode, new_bh, preserve); + if (ret) + mlog_errno(ret); + inode_unlock: ocfs2_inode_unlock(new_inode, 1); brelse(new_bh); From 2f48d593b6ceb7bb63d34124ceba77d33be298cf Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Thu, 15 Oct 2009 11:10:49 +0800 Subject: [PATCH 064/743] ocfs2: duplicate inline data properly during reflink. The old reflink fails to handle inodes with inline data and will oops if it encounters them. This patch copies inline data to the new inode. Extended attributes may still be refcounted. Signed-off-by: Tao Ma Signed-off-by: Joel Becker Tested-by: Tristan Ye --- fs/ocfs2/file.c | 3 ++- fs/ocfs2/refcounttree.c | 55 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 89fc8ee1f5a5..de059f490586 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -1712,7 +1712,8 @@ int ocfs2_check_range_for_refcount(struct inode *inode, loff_t pos, struct super_block *sb = inode->i_sb; if (!ocfs2_refcount_tree(OCFS2_SB(inode->i_sb)) || - !(OCFS2_I(inode)->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL)) + !(OCFS2_I(inode)->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL) || + OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) return 0; cpos = pos >> OCFS2_SB(sb)->s_clustersize_bits; diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c index 9d439b277304..3a0df7a1b810 100644 --- a/fs/ocfs2/refcounttree.c +++ b/fs/ocfs2/refcounttree.c @@ -3743,6 +3743,9 @@ static int ocfs2_attach_refcount_tree(struct inode *inode, goto out; } + if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) + goto attach_xattr; + ocfs2_init_dinode_extent_tree(&di_et, INODE_CACHE(inode), di_bh); size = i_size_read(inode); @@ -3769,6 +3772,7 @@ static int ocfs2_attach_refcount_tree(struct inode *inode, cpos += num_clusters; } +attach_xattr: if (oi->ip_dyn_features & OCFS2_HAS_XATTR_FL) { ret = ocfs2_xattr_attach_refcount_tree(inode, di_bh, &ref_tree->rf_ci, @@ -3858,6 +3862,49 @@ out: return ret; } +static int ocfs2_duplicate_inline_data(struct inode *s_inode, + struct buffer_head *s_bh, + struct inode *t_inode, + struct buffer_head *t_bh) +{ + int ret; + handle_t *handle; + struct ocfs2_super *osb = OCFS2_SB(s_inode->i_sb); + struct ocfs2_dinode *s_di = (struct ocfs2_dinode *)s_bh->b_data; + struct ocfs2_dinode *t_di = (struct ocfs2_dinode *)t_bh->b_data; + + BUG_ON(!(OCFS2_I(s_inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL)); + + handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); + mlog_errno(ret); + goto out; + } + + ret = ocfs2_journal_access_di(handle, INODE_CACHE(t_inode), t_bh, + OCFS2_JOURNAL_ACCESS_WRITE); + if (ret) { + mlog_errno(ret); + goto out_commit; + } + + t_di->id2.i_data.id_count = s_di->id2.i_data.id_count; + memcpy(t_di->id2.i_data.id_data, s_di->id2.i_data.id_data, + le16_to_cpu(s_di->id2.i_data.id_count)); + spin_lock(&OCFS2_I(t_inode)->ip_lock); + OCFS2_I(t_inode)->ip_dyn_features |= OCFS2_INLINE_DATA_FL; + t_di->i_dyn_features = cpu_to_le16(OCFS2_I(t_inode)->ip_dyn_features); + spin_unlock(&OCFS2_I(t_inode)->ip_lock); + + ocfs2_journal_dirty(handle, t_bh); + +out_commit: + ocfs2_commit_trans(osb, handle); +out: + return ret; +} + static int ocfs2_duplicate_extent_list(struct inode *s_inode, struct inode *t_inode, struct buffer_head *t_bh, @@ -3997,6 +4044,14 @@ static int ocfs2_create_reflink_node(struct inode *s_inode, goto out; } + if (OCFS2_I(s_inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) { + ret = ocfs2_duplicate_inline_data(s_inode, s_bh, + t_inode, t_bh); + if (ret) + mlog_errno(ret); + goto out; + } + ret = ocfs2_lock_refcount_tree(osb, le64_to_cpu(di->i_refcount_loc), 1, &ref_tree, &ref_root_bh); if (ret) { From 59a40e70458341b35d123b60aca416a1d97ebbe3 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 29 Oct 2009 16:25:50 +0100 Subject: [PATCH 065/743] dma-debug: Fix compile warning with PAE enabled When PAE is enabled in the kernel configuration the size of phys_addr_t differs from the size of a void pointer. The gcc prints a warning about that in dma-debug code. This patch fixes the warning by converting the output to unsigned long long instead of a pointer. Signed-off-by: Joerg Roedel --- lib/dma-debug.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/lib/dma-debug.c b/lib/dma-debug.c index 58a9f9fc609a..ce6b7eabf674 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -819,9 +819,11 @@ static void check_unmap(struct dma_debug_entry *ref) err_printk(ref->dev, entry, "DMA-API: device driver frees " "DMA memory with different CPU address " "[device address=0x%016llx] [size=%llu bytes] " - "[cpu alloc address=%p] [cpu free address=%p]", + "[cpu alloc address=0x%016llx] " + "[cpu free address=0x%016llx]", ref->dev_addr, ref->size, - (void *)entry->paddr, (void *)ref->paddr); + (unsigned long long)entry->paddr, + (unsigned long long)ref->paddr); } if (ref->sg_call_ents && ref->type == dma_debug_sg && From 837711f862bb71ac263837a0f0714dd8cc4ef7ea Mon Sep 17 00:00:00 2001 From: Coly Li Date: Fri, 16 Jan 2009 16:33:05 +0800 Subject: [PATCH 066/743] ocfs2: return f_fsid info in ocfs2_statfs() Currently the f_fsid of struct kstatfs returned from ocfs2_statfs() is undefined (vfs layer fills in 0 as default). Since in some conditions, f_fsid value might be used in a (f_fsid, ino) pair to uniquely identify a file, ocfs2 should return a unique defined f_fsid value from ocfs2_statfs(). Because uuid_str is the same on big or litlle endian machine, it's endian consistent to use osb->uuid_str to generate f_fsid value. Signed-off-by: Coly Li Cc: Sunil Mushran Cc: Mark Fasheh Signed-off-by: Joel Becker --- fs/ocfs2/super.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 960673004df1..14f47d2bfe02 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -1647,6 +1647,10 @@ static int ocfs2_statfs(struct dentry *dentry, struct kstatfs *buf) buf->f_bavail = buf->f_bfree; buf->f_files = numbits; buf->f_ffree = freebits; + buf->f_fsid.val[0] = crc32_le(0, osb->uuid_str, OCFS2_VOL_UUID_LEN) + & 0xFFFFFFFFUL; + buf->f_fsid.val[1] = crc32_le(0, osb->uuid_str + OCFS2_VOL_UUID_LEN, + OCFS2_VOL_UUID_LEN) & 0xFFFFFFFFUL; brelse(bh); From 5a1eb5c4453207ad9e7f6e8ca4f8db289743c993 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 30 Oct 2009 15:03:54 +1100 Subject: [PATCH 067/743] powerpc: Cleanup Kconfig selection of hugetlbfs support Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 4 ++++ fs/Kconfig | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 10a0a5488a44..2ba14e77296c 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -414,6 +414,10 @@ config ARCH_SPARSEMEM_DEFAULT config ARCH_POPULATES_NODE_MAP def_bool y +config SYS_SUPPORTS_HUGETLBFS + def_bool y + depends on PPC_BOOK3S_64 + source "mm/Kconfig" config ARCH_MEMORY_PROBE diff --git a/fs/Kconfig b/fs/Kconfig index 2126078a38ed..64d44efad7a5 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -135,7 +135,7 @@ config TMPFS_POSIX_ACL config HUGETLBFS bool "HugeTLB file system support" - depends on X86 || IA64 || PPC_BOOK3S_64 || SPARC64 || (S390 && 64BIT) || \ + depends on X86 || IA64 || SPARC64 || (S390 && 64BIT) || \ SYS_SUPPORTS_HUGETLBFS || BROKEN help hugetlbfs is a filesystem backing for HugeTLB pages, based on From 16121d70fdf9eeb05ead46b241a293156323dbbe Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 1 Nov 2009 19:27:05 -0500 Subject: [PATCH 068/743] x86: Fix printk message typo in mtrr cleanup code Trivial typo. Signed-off-by: Dave Jones LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/cleanup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c index 315738c74aad..73c86db5acbe 100644 --- a/arch/x86/kernel/cpu/mtrr/cleanup.c +++ b/arch/x86/kernel/cpu/mtrr/cleanup.c @@ -846,7 +846,7 @@ int __init mtrr_cleanup(unsigned address_bits) sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); range_sums = sum_ranges(range, nr_range); - printk(KERN_INFO "total RAM coverred: %ldM\n", + printk(KERN_INFO "total RAM covered: %ldM\n", range_sums >> (20 - PAGE_SHIFT)); if (mtrr_chunk_size && mtrr_gran_size) { From ad0bf11070ebb3c95f8ce82e6219dbd79c8e8b69 Mon Sep 17 00:00:00 2001 From: Alberto Bertogli Date: Mon, 2 Nov 2009 11:39:22 +0100 Subject: [PATCH 069/743] bio_put(): add bio_clone() to the list of functions in the comment In bio_put()'s comment, add bio_clone() to the list of functions that can give you a bio reference. Signed-off-by: Alberto Bertogli Signed-off-by: Jens Axboe --- fs/bio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/bio.c b/fs/bio.c index 402cb84a92a1..bcab9e93d3a7 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -407,7 +407,7 @@ EXPORT_SYMBOL(zero_fill_bio); * * Description: * Put a reference to a &struct bio, either one you have gotten with - * bio_alloc or bio_get. The last put of a bio will free it. + * bio_alloc, bio_get or bio_clone. The last put of a bio will free it. **/ void bio_put(struct bio *bio) { From 5f04eeb8a76521dec371ceb05e8263889a8af2bc Mon Sep 17 00:00:00 2001 From: Alberto Bertogli Date: Mon, 2 Nov 2009 11:39:42 +0100 Subject: [PATCH 070/743] Fix bio_alloc() and bio_kmalloc() documentation Commit 451a9ebf accidentally broke bio_alloc() and bio_kmalloc() comments by (almost) swapping them. This patch fixes that, by placing the comments in the right place. Signed-off-by: Alberto Bertogli Acked-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/bio.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/fs/bio.c b/fs/bio.c index bcab9e93d3a7..12da5db8682c 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -325,8 +325,16 @@ static void bio_fs_destructor(struct bio *bio) * @gfp_mask: allocation mask to use * @nr_iovecs: number of iovecs * - * Allocate a new bio with @nr_iovecs bvecs. If @gfp_mask - * contains __GFP_WAIT, the allocation is guaranteed to succeed. + * bio_alloc will allocate a bio and associated bio_vec array that can hold + * at least @nr_iovecs entries. Allocations will be done from the + * fs_bio_set. Also see @bio_alloc_bioset and @bio_kmalloc. + * + * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate + * a bio. This is due to the mempool guarantees. To make this work, callers + * must never allocate more than 1 bio at a time from this pool. Callers + * that need to allocate more than 1 bio must always submit the previously + * allocated bio for IO before attempting to allocate a new one. Failure to + * do so can cause livelocks under memory pressure. * * RETURNS: * Pointer to new bio on success, NULL on failure. @@ -350,21 +358,13 @@ static void bio_kmalloc_destructor(struct bio *bio) } /** - * bio_alloc - allocate a bio for I/O + * bio_kmalloc - allocate a bio for I/O using kmalloc() * @gfp_mask: the GFP_ mask given to the slab allocator * @nr_iovecs: number of iovecs to pre-allocate * * Description: - * bio_alloc will allocate a bio and associated bio_vec array that can hold - * at least @nr_iovecs entries. Allocations will be done from the - * fs_bio_set. Also see @bio_alloc_bioset. - * - * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate - * a bio. This is due to the mempool guarantees. To make this work, callers - * must never allocate more than 1 bio at a time from this pool. Callers - * that need to allocate more than 1 bio must always submit the previously - * allocated bio for IO before attempting to allocate a new one. Failure to - * do so can cause livelocks under memory pressure. + * Allocate a new bio with @nr_iovecs bvecs. If @gfp_mask contains + * %__GFP_WAIT, the allocation is guaranteed to succeed. * **/ struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs) From 05154752cf3767c544b65b5e340793d40b3f1229 Mon Sep 17 00:00:00 2001 From: Gottfried Haider Date: Mon, 2 Nov 2009 11:51:11 +0100 Subject: [PATCH 071/743] x86: Add reboot quirk for 3 series Mac mini MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reboot does not work out of the box on my "Early 2009" Mac mini (3,1). Detect this machine via DMI as we do for recent MacBooks. Signed-off-by: Gottfried Haider Cc: Ozan Çağlayan Cc: Paul Mackerras Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index a1a3cdda06e1..f93078746e00 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -436,6 +436,14 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"), }, }, + { /* Handle problems with rebooting on Apple Macmini3,1 */ + .callback = set_pci_reboot, + .ident = "Apple Macmini3,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Macmini3,1"), + }, + }, { } }; From 49557e620339cb134127b5bfbcfecc06b77d0232 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 2 Nov 2009 20:37:20 +1030 Subject: [PATCH 072/743] sched: Fix boot crash by zalloc()ing most of the cpu masks I got a boot crash when forcing cpumasks offstack on 32 bit, because find_new_ilb() returned 3 on my UP system (nohz.cpu_mask wasn't zeroed). AFAICT the others need to be zeroed too: only nohz.ilb_grp_nohz_mask is initialized before use. Signed-off-by: Rusty Russell Cc: Peter Zijlstra LKML-Reference: <200911022037.21282.rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar --- kernel/sched.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index cae6700bedb3..bf21adb6c9fc 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -9535,13 +9535,13 @@ void __init sched_init(void) current->sched_class = &fair_sched_class; /* Allocate the nohz_cpu_mask if CONFIG_CPUMASK_OFFSTACK */ - alloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT); + zalloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT); #ifdef CONFIG_SMP #ifdef CONFIG_NO_HZ - alloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT); + zalloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT); alloc_cpumask_var(&nohz.ilb_grp_nohz_mask, GFP_NOWAIT); #endif - alloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT); + zalloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT); #endif /* SMP */ perf_event_init(); From b00bc0b237055b4c45816325ee14f0bd83e6f590 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 2 Nov 2009 13:01:56 +0100 Subject: [PATCH 073/743] uids: Prevent tear down race Ingo triggered the following warning: WARNING: at lib/debugobjects.c:255 debug_print_object+0x42/0x50() Hardware name: System Product Name ODEBUG: init active object type: timer_list Modules linked in: Pid: 2619, comm: dmesg Tainted: G W 2.6.32-rc5-tip+ #5298 Call Trace: [<81035443>] warn_slowpath_common+0x6a/0x81 [<8120e483>] ? debug_print_object+0x42/0x50 [<81035498>] warn_slowpath_fmt+0x29/0x2c [<8120e483>] debug_print_object+0x42/0x50 [<8120ec2a>] __debug_object_init+0x279/0x2d7 [<8120ecb3>] debug_object_init+0x13/0x18 [<810409d2>] init_timer_key+0x17/0x6f [<81041526>] free_uid+0x50/0x6c [<8104ed2d>] put_cred_rcu+0x61/0x72 [<81067fac>] rcu_do_batch+0x70/0x121 debugobjects warns about an enqueued timer being initialized. If CONFIG_USER_SCHED=y the user management code uses delayed work to remove the user from the hash table and tear down the sysfs objects. free_uid is called from RCU and initializes/schedules delayed work if the usage count of the user_struct is 0. The init/schedule happens outside of the uidhash_lock protected region which allows a concurrent caller of find_user() to reference the about to be destroyed user_struct w/o preventing the work from being scheduled. If the next free_uid call happens before the work timer expired then the active timer is initialized and the work scheduled again. The race was introduced in commit 5cb350ba (sched: group scheduling, sysfs tunables) and made more prominent by commit 3959214f (sched: delayed cleanup of user_struct) Move the init/schedule_delayed_work inside of the uidhash_lock protected region to prevent the race. Signed-off-by: Thomas Gleixner Acked-by: Dhaval Giani Cc: Paul E. McKenney Cc: Kay Sievers Cc: stable@kernel.org --- kernel/user.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/user.c b/kernel/user.c index 2c000e7132ac..46d0165ca70c 100644 --- a/kernel/user.c +++ b/kernel/user.c @@ -330,9 +330,9 @@ done: */ static void free_user(struct user_struct *up, unsigned long flags) { - spin_unlock_irqrestore(&uidhash_lock, flags); INIT_DELAYED_WORK(&up->work, cleanup_user_struct); schedule_delayed_work(&up->work, msecs_to_jiffies(1000)); + spin_unlock_irqrestore(&uidhash_lock, flags); } #else /* CONFIG_USER_SCHED && CONFIG_SYSFS */ From 83f5b01ffbbaea6f97c9a79d21e240dbfb69f2f1 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 28 Oct 2009 08:14:49 -0700 Subject: [PATCH 074/743] rcu: Fix long-grace-period race between forcing and initialization Very long RCU read-side critical sections (50 milliseconds or so) can cause a race between force_quiescent_state() and rcu_start_gp() as follows on kernel builds with multi-level rcu_node hierarchies: 1. CPU 0 calls force_quiescent_state(), sees that there is a grace period in progress, and acquires ->fsqlock. 2. CPU 1 detects the end of the grace period, and so cpu_quiet_msk_finish() sets rsp->completed to rsp->gpnum. This operation is carried out under the root rnp->lock, but CPU 0 has not yet acquired that lock. Note that rsp->signaled is still RCU_SAVE_DYNTICK from the last grace period. 3. CPU 1 calls rcu_start_gp(), but no one wants a new grace period, so it drops the root rnp->lock and returns. 4. CPU 0 acquires the root rnp->lock and picks up rsp->completed and rsp->signaled, then drops rnp->lock. It then enters the RCU_SAVE_DYNTICK leg of the switch statement. 5. CPU 2 invokes call_rcu(), and now needs a new grace period. It calls rcu_start_gp(), which acquires the root rnp->lock, sets rsp->signaled to RCU_GP_INIT (too bad that CPU 0 is already in the RCU_SAVE_DYNTICK leg of the switch statement!) and starts initializing the rcu_node hierarchy. If there are multiple levels to the hierarchy, it will drop the root rnp->lock and initialize the lower levels of the hierarchy. 6. CPU 0 notes that rsp->completed has not changed, which permits both CPU 2 and CPU 0 to try updating it concurrently. If CPU 0's update prevails, later calls to force_quiescent_state() can count old quiescent states against the new grace period, which can in turn result in premature ending of grace periods. Not good. This patch adds an RCU_GP_IDLE state for rsp->signaled that is set initially at boot time and any time a grace period ends. This prevents CPU 0 from getting into the workings of force_quiescent_state() in step 4. Additional locking and checks prevent the concurrent update of rsp->signaled in step 6. Signed-off-by: Paul E. McKenney Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1256742889199-git-send-email-> Signed-off-by: Ingo Molnar --- kernel/rcutree.c | 16 +++++++++++----- kernel/rcutree.h | 7 ++++--- 2 files changed, 15 insertions(+), 8 deletions(-) diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 0536125b0497..f3077c0ab181 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -59,7 +59,7 @@ NUM_RCU_LVL_2, \ NUM_RCU_LVL_3, /* == MAX_RCU_LVLS */ \ }, \ - .signaled = RCU_SIGNAL_INIT, \ + .signaled = RCU_GP_IDLE, \ .gpnum = -300, \ .completed = -300, \ .onofflock = __SPIN_LOCK_UNLOCKED(&name.onofflock), \ @@ -657,14 +657,17 @@ rcu_start_gp(struct rcu_state *rsp, unsigned long flags) * irqs disabled. */ rcu_for_each_node_breadth_first(rsp, rnp) { - spin_lock(&rnp->lock); /* irqs already disabled. */ + spin_lock(&rnp->lock); /* irqs already disabled. */ rcu_preempt_check_blocked_tasks(rnp); rnp->qsmask = rnp->qsmaskinit; rnp->gpnum = rsp->gpnum; - spin_unlock(&rnp->lock); /* irqs already disabled. */ + spin_unlock(&rnp->lock); /* irqs remain disabled. */ } + rnp = rcu_get_root(rsp); + spin_lock(&rnp->lock); /* irqs already disabled. */ rsp->signaled = RCU_SIGNAL_INIT; /* force_quiescent_state now OK. */ + spin_unlock(&rnp->lock); /* irqs remain disabled. */ spin_unlock_irqrestore(&rsp->onofflock, flags); } @@ -706,6 +709,7 @@ static void cpu_quiet_msk_finish(struct rcu_state *rsp, unsigned long flags) { WARN_ON_ONCE(!rcu_gp_in_progress(rsp)); rsp->completed = rsp->gpnum; + rsp->signaled = RCU_GP_IDLE; rcu_process_gp_end(rsp, rsp->rda[smp_processor_id()]); rcu_start_gp(rsp, flags); /* releases root node's rnp->lock. */ } @@ -1162,9 +1166,10 @@ static void force_quiescent_state(struct rcu_state *rsp, int relaxed) } spin_unlock(&rnp->lock); switch (signaled) { + case RCU_GP_IDLE: case RCU_GP_INIT: - break; /* grace period still initializing, ignore. */ + break; /* grace period idle or initializing, ignore. */ case RCU_SAVE_DYNTICK: @@ -1178,7 +1183,8 @@ static void force_quiescent_state(struct rcu_state *rsp, int relaxed) /* Update state, record completion counter. */ spin_lock(&rnp->lock); - if (lastcomp == rsp->completed) { + if (lastcomp == rsp->completed && + rsp->signaled == RCU_SAVE_DYNTICK) { rsp->signaled = RCU_FORCE_QS; dyntick_record_completed(rsp, lastcomp); } diff --git a/kernel/rcutree.h b/kernel/rcutree.h index 1823c6e20609..1899023b0962 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -201,9 +201,10 @@ struct rcu_data { }; /* Values for signaled field in struct rcu_state. */ -#define RCU_GP_INIT 0 /* Grace period being initialized. */ -#define RCU_SAVE_DYNTICK 1 /* Need to scan dyntick state. */ -#define RCU_FORCE_QS 2 /* Need to force quiescent state. */ +#define RCU_GP_IDLE 0 /* No grace period in progress. */ +#define RCU_GP_INIT 1 /* Grace period being initialized. */ +#define RCU_SAVE_DYNTICK 2 /* Need to scan dyntick state. */ +#define RCU_FORCE_QS 3 /* Need to force quiescent state. */ #ifdef CONFIG_NO_HZ #define RCU_SIGNAL_INIT RCU_SAVE_DYNTICK #else /* #ifdef CONFIG_NO_HZ */ From dd77038d233d106f297b907bf51459dfb1099eb1 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Fri, 30 Oct 2009 19:32:25 -0200 Subject: [PATCH 075/743] perf_events: Fix some typo in the perf events config description Signed-off-by: Thadeu Lima de Souza Cascardo Cc: trivial@kernel.org LKML-Reference: <1256938346-8230-1-git-send-email-cascardo@holoscopio.com> Signed-off-by: Ingo Molnar --- init/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/init/Kconfig b/init/Kconfig index 09c5c6431f42..3b8c7bc943b3 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -937,7 +937,7 @@ config PERF_EVENTS Enable kernel support for various performance events provided by software and hardware. - Software events are supported either build-in or via the + Software events are supported either built-in or via the use of generic tracepoints. Most modern CPUs support performance events via performance @@ -949,7 +949,7 @@ config PERF_EVENTS used to profile the code that runs on that CPU. The Linux Performance Event subsystem provides an abstraction of - these software and hardware cevent apabilities, available via a + these software and hardware event capabilities, available via a system call and used by the "perf" utility in tools/perf/. It provides per task and per CPU counters, and it provides event capabilities on top of those. From fa5d11133b07053270e18fa9c18560e66e79217e Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Mon, 2 Nov 2009 18:50:49 -0500 Subject: [PATCH 076/743] ext4: discard preallocation when restarting a transaction during truncate When restart a transaction during a truncate operation, we drop and reacquire i_data_sem. After reacquiring i_data_sem, we need to discard any inode-based preallocation that might have been grabbed while we released i_data_sem (for example, if pdflush is allocating blocks and racing against the truncate). Signed-off-by: Aneesh Kumar K.V Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 5c5bc5dafff8..d1ec698a91d1 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -193,7 +193,7 @@ static int try_to_extend_transaction(handle_t *handle, struct inode *inode) * so before we call here everything must be consistently dirtied against * this transaction. */ - int ext4_truncate_restart_trans(handle_t *handle, struct inode *inode, +int ext4_truncate_restart_trans(handle_t *handle, struct inode *inode, int nblocks) { int ret; @@ -209,6 +209,7 @@ static int try_to_extend_transaction(handle_t *handle, struct inode *inode) up_write(&EXT4_I(inode)->i_data_sem); ret = ext4_journal_restart(handle, blocks_for_truncate(inode)); down_write(&EXT4_I(inode)->i_data_sem); + ext4_discard_preallocations(inode); return ret; } From 5e0fa3f63eda875cbe23be37d64a16c65a577209 Mon Sep 17 00:00:00 2001 From: Stanislav Brabec Date: Thu, 22 Oct 2009 23:05:03 +0200 Subject: [PATCH 077/743] [ARM] pxa/zaurus: fix NAND flash OOB layout for Borzoi Borzoi, Terrier and Akita use the same NAND Flash OOB layout, which seems to be different from Spitz for some reason. Here is a fix. When the code was ported to the platform data, the map was applied just for Akita. After this patch, Flash works again on Borzoi. Terrier still has a problem with partition table different from Borzoi (unfixable without reading of the system configuration in flash) and JFFS2 partitions can be mounted (with some "Empty flash at ... ends at ..." in the syslog). Signed-off-by: Stanislav Brabec Acked-by: Richard Purdie Signed-off-by: Eric Miao --- arch/arm/mach-pxa/spitz.c | 39 +++++++++++++++++++++++---------------- 1 file changed, 23 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 82ff5733e4dc..3da45d051743 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -779,11 +779,34 @@ static void __init common_init(void) pxa_set_i2c_info(NULL); } +#if defined(CONFIG_MACH_AKITA) || defined(CONFIG_MACH_BORZOI) +static struct nand_bbt_descr sharpsl_akita_bbt = { + .options = 0, + .offs = 4, + .len = 1, + .pattern = scan_ff_pattern +}; + +static struct nand_ecclayout akita_oobinfo = { + .eccbytes = 24, + .eccpos = { + 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11, + 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23, + 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37}, + .oobfree = {{0x08, 0x09}} +}; +#endif + #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) static void __init spitz_init(void) { spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON; + if (machine_is_borzoi()) { + sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt; + sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo; + } + platform_scoop_config = &spitz_pcmcia_config; common_init(); @@ -808,22 +831,6 @@ static struct i2c_board_info akita_i2c_board_info[] = { }, }; -static struct nand_bbt_descr sharpsl_akita_bbt = { - .options = 0, - .offs = 4, - .len = 1, - .pattern = scan_ff_pattern -}; - -static struct nand_ecclayout akita_oobinfo = { - .eccbytes = 24, - .eccpos = { - 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11, - 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23, - 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37}, - .oobfree = {{0x08, 0x09}} -}; - static void __init akita_init(void) { spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON; From 902805dbdae016653768f7139d7b3ab36a20cc6d Mon Sep 17 00:00:00 2001 From: Ondrej Zajicek Date: Mon, 26 Oct 2009 23:59:30 +0100 Subject: [PATCH 078/743] [ARM] pxa/palm: fix incorrect initialization of Palm Tungsten C keyboard Palm Tungsten C keyboard structure has swapped rows/cols gpio structures and does not work. This patch fixes it. Signed-off-by: Ondrej Zajicek Cc: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/palmtc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index bb2cc0dd44ec..0b92291a58f6 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -292,10 +292,10 @@ const static unsigned int palmtc_keypad_col_gpios[] = { static struct matrix_keypad_platform_data palmtc_keypad_platform_data = { .keymap_data = &palmtc_keymap_data, - .col_gpios = palmtc_keypad_row_gpios, - .num_col_gpios = 12, - .row_gpios = palmtc_keypad_col_gpios, - .num_row_gpios = 4, + .row_gpios = palmtc_keypad_row_gpios, + .num_row_gpios = ARRAY_SIZE(palmtc_keypad_row_gpios), + .col_gpios = palmtc_keypad_col_gpios, + .num_col_gpios = ARRAY_SIZE(palmtc_keypad_col_gpios), .active_low = 1, .debounce_ms = 20, From c482ae4dcf23fd241321595d71bbe8aee33eabf5 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Mon, 2 Nov 2009 14:02:21 -0500 Subject: [PATCH 079/743] [ARM] pxa: fix resume failure by saving/restoring IPRx registers Since interrupt handler is changed to use interrupt priority, we also need to save and restore these interrupt controller registers in suspend/resume routine. Signed-off-by: Haojian Zhuang Tested-by: Daniel Mack Tested-by: Pavel Machek Tested-by: Robert Jarzmik Acked-by: Pavel Machek Signed-off-by: Eric Miao --- arch/arm/mach-pxa/irq.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index d694ce289668..6112af431fa4 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -25,6 +25,8 @@ #include "generic.h" +#define MAX_INTERNAL_IRQS 128 + #define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f) #define _ICMR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICMR2 : &ICMR)) #define _ICLR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICLR2 : &ICLR)) @@ -122,6 +124,8 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) { int irq, i; + BUG_ON(irq_nr > MAX_INTERNAL_IRQS); + pxa_internal_irq_nr = irq_nr; for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) { @@ -149,7 +153,8 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) } #ifdef CONFIG_PM -static unsigned long saved_icmr[2]; +static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32]; +static unsigned long saved_ipr[MAX_INTERNAL_IRQS]; static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) { @@ -159,6 +164,8 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) saved_icmr[i] = _ICMR(irq); _ICMR(irq) = 0; } + for (i = 0; i < pxa_internal_irq_nr; i++) + saved_ipr[i] = IPR(i); return 0; } @@ -171,6 +178,8 @@ static int pxa_irq_resume(struct sys_device *dev) _ICMR(irq) = saved_icmr[i]; _ICLR(irq) = 0; } + for (i = 0; i < pxa_internal_irq_nr; i++) + IPR(i) = saved_ipr[i]; ICCR = 1; return 0; From 6b9de613ae9c79b637e070136585dde029578065 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Mon, 2 Nov 2009 20:36:51 +0100 Subject: [PATCH 080/743] sched: Disable SD_PREFER_LOCAL at node level Yanmin Zhang reported that SD_PREFER_LOCAL induces an order of magnitude increase in select_task_rq_fair() overhead while running heavy wakeup benchmarks (tbench and vmark). Since SD_BALANCE_WAKE is off at node level, turn SD_PREFER_LOCAL off as well pending further investigation. Reported-by: Zhang, Yanmin Signed-off-by: Mike Galbraith Cc: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/include/asm/topology.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index d823c245f63b..40e37b10c6c0 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -143,7 +143,7 @@ extern unsigned long node_remap_size[]; | 1*SD_BALANCE_FORK \ | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ - | 1*SD_PREFER_LOCAL \ + | 0*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ | 0*SD_POWERSAVINGS_BALANCE \ | 0*SD_SHARE_PKG_RESOURCES \ From b84ff7d6f1b7f8a43414e74d972ec4c8f3361db4 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Thu, 29 Oct 2009 11:48:30 +0100 Subject: [PATCH 081/743] sched: Fix kthread_bind() by moving the body of kthread_bind() to sched.c Eric Paris reported that commit f685ceacab07d3f6c236f04803e2f2f0dbcc5afb causes boot time PREEMPT_DEBUG complaints. [ 4.590699] BUG: using smp_processor_id() in preemptible [00000000] code: rmmod/1314 [ 4.593043] caller is task_hot+0x86/0xd0 Since kthread_bind() messes with scheduler internals, move the body to sched.c, and lock the runqueue. Reported-by: Eric Paris Signed-off-by: Mike Galbraith Tested-by: Eric Paris Cc: Peter Zijlstra LKML-Reference: <1256813310.7574.3.camel@marge.simson.net> [ v2: fix !SMP build and clean up ] Signed-off-by: Ingo Molnar --- kernel/kthread.c | 23 ----------------------- kernel/sched.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 32 insertions(+), 23 deletions(-) diff --git a/kernel/kthread.c b/kernel/kthread.c index 5fe709982caa..ab7ae57773e1 100644 --- a/kernel/kthread.c +++ b/kernel/kthread.c @@ -149,29 +149,6 @@ struct task_struct *kthread_create(int (*threadfn)(void *data), } EXPORT_SYMBOL(kthread_create); -/** - * kthread_bind - bind a just-created kthread to a cpu. - * @k: thread created by kthread_create(). - * @cpu: cpu (might not be online, must be possible) for @k to run on. - * - * Description: This function is equivalent to set_cpus_allowed(), - * except that @cpu doesn't need to be online, and the thread must be - * stopped (i.e., just returned from kthread_create()). - */ -void kthread_bind(struct task_struct *k, unsigned int cpu) -{ - /* Must have done schedule() in kthread() before we set_task_cpu */ - if (!wait_task_inactive(k, TASK_UNINTERRUPTIBLE)) { - WARN_ON(1); - return; - } - set_task_cpu(k, cpu); - k->cpus_allowed = cpumask_of_cpu(cpu); - k->rt.nr_cpus_allowed = 1; - k->flags |= PF_THREAD_BOUND; -} -EXPORT_SYMBOL(kthread_bind); - /** * kthread_stop - stop a thread created by kthread_create(). * @k: thread created by kthread_create(). diff --git a/kernel/sched.c b/kernel/sched.c index bf21adb6c9fc..5cb7d637e33a 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1996,6 +1996,38 @@ static inline void check_class_changed(struct rq *rq, struct task_struct *p, p->sched_class->prio_changed(rq, p, oldprio, running); } +/** + * kthread_bind - bind a just-created kthread to a cpu. + * @k: thread created by kthread_create(). + * @cpu: cpu (might not be online, must be possible) for @k to run on. + * + * Description: This function is equivalent to set_cpus_allowed(), + * except that @cpu doesn't need to be online, and the thread must be + * stopped (i.e., just returned from kthread_create()). + * + * Function lives here instead of kthread.c because it messes with + * scheduler internals which require locking. + */ +void kthread_bind(struct task_struct *p, unsigned int cpu) +{ + struct rq *rq = cpu_rq(cpu); + unsigned long flags; + + /* Must have done schedule() in kthread() before we set_task_cpu */ + if (!wait_task_inactive(p, TASK_UNINTERRUPTIBLE)) { + WARN_ON(1); + return; + } + + spin_lock_irqsave(&rq->lock, flags); + set_task_cpu(p, cpu); + p->cpus_allowed = cpumask_of_cpu(cpu); + p->rt.nr_cpus_allowed = 1; + p->flags |= PF_THREAD_BOUND; + spin_unlock_irqrestore(&rq->lock, flags); +} +EXPORT_SYMBOL(kthread_bind); + #ifdef CONFIG_SMP /* * Is this task likely cache-hot: From 58ce48a9de1dd47acb5dc00e2837214d2be1d92a Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Fri, 16 Oct 2009 22:22:46 +0200 Subject: [PATCH 082/743] Revert "eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit rt2860sta is fine with the patch as is, but iwl3945 isn't (eeepc_rfkill_set() needs to call eeepc_rfkill_hotplug(true) – which means that we're back to causing the rt2860sta panic This reverts commit b56ab33d68638e6aafdbfc694025e8354a628f49. Signed-off-by: Corentin Chary Signed-off-by: Darren Salt Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 27 ++++++++------------------- 1 file changed, 8 insertions(+), 19 deletions(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index d379e74a05d0..789d6ae003fb 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -150,8 +150,6 @@ struct eeepc_hotk { /* The actual device the driver binds to */ static struct eeepc_hotk *ehotk; -static void eeepc_rfkill_hotplug(bool real); - /* Platform device/driver */ static int eeepc_hotk_thaw(struct device *device); static int eeepc_hotk_restore(struct device *device); @@ -345,16 +343,7 @@ static bool eeepc_wlan_rfkill_blocked(void) static int eeepc_rfkill_set(void *data, bool blocked) { unsigned long asl = (unsigned long)data; - int ret; - - if (asl != CM_ASL_WLAN) - return set_acpi(asl, !blocked); - - /* hack to avoid panic with rt2860sta */ - if (blocked) - eeepc_rfkill_hotplug(false); - ret = set_acpi(asl, !blocked); - return ret; + return set_acpi(asl, !blocked); } static const struct rfkill_ops eeepc_rfkill_ops = { @@ -654,13 +643,13 @@ static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot, return 0; } -static void eeepc_rfkill_hotplug(bool real) +static void eeepc_rfkill_hotplug(void) { struct pci_dev *dev; struct pci_bus *bus; - bool blocked = real ? eeepc_wlan_rfkill_blocked() : true; + bool blocked = eeepc_wlan_rfkill_blocked(); - if (real && ehotk->wlan_rfkill) + if (ehotk->wlan_rfkill) rfkill_set_sw_state(ehotk->wlan_rfkill, blocked); mutex_lock(&ehotk->hotplug_lock); @@ -703,7 +692,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) if (event != ACPI_NOTIFY_BUS_CHECK) return; - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); } static void eeepc_hotk_notify(struct acpi_device *device, u32 event) @@ -861,7 +850,7 @@ static int eeepc_hotk_restore(struct device *device) { /* Refresh both wlan rfkill state and pci hotplug */ if (ehotk->wlan_rfkill) - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); if (ehotk->bluetooth_rfkill) rfkill_set_sw_state(ehotk->bluetooth_rfkill, @@ -1004,7 +993,7 @@ static void eeepc_rfkill_exit(void) * Refresh pci hotplug in case the rfkill state was changed after * eeepc_unregister_rfkill_notifier() */ - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); if (ehotk->hotplug_slot) pci_hp_deregister(ehotk->hotplug_slot); @@ -1120,7 +1109,7 @@ static int eeepc_rfkill_init(struct device *dev) * Refresh pci hotplug in case the rfkill state was changed during * setup. */ - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); exit: if (result && result != -ENODEV) From 80f0c895b57f0d936b420de6afea5167a49f62fa Mon Sep 17 00:00:00 2001 From: Luca Niccoli Date: Fri, 16 Oct 2009 22:22:47 +0200 Subject: [PATCH 083/743] eeepc-laptop: don't enable camera at startup if it's already on. Switching the camera takes 500ms, checking if it's on is almost free... The BIOS remembers the setting through reboots, so there's good chance the camera is already enabled. Signed-off-by: Luca Niccoli Cc: Corentin Chary Cc: Alan Jenkins Cc: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 789d6ae003fb..4226e5352738 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -356,7 +356,8 @@ static void __devinit eeepc_enable_camera(void) * If the following call to set_acpi() fails, it's because there's no * camera so we can ignore the error. */ - set_acpi(CM_ASL_CAMERA, 1); + if (get_acpi(CM_ASL_CAMERA) == 0) + set_acpi(CM_ASL_CAMERA, 1); } /* From 7542fa72e26f81bfc5d4119ca6f5bb5dcdc1ef82 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 15 Oct 2009 20:15:17 +0200 Subject: [PATCH 084/743] [SCSI] bfa: fix test in bfad_os_fc_host_init() BFA_PORT_ROLE_FCP_IPFC is 0x04 so this always evaluates to true Signed-off-by: Roel Kluin Acked-by: Jing Huang Signed-off-by: James Bottomley --- drivers/scsi/bfa/bfad_im.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c index 158c99243c08..55d012a9a668 100644 --- a/drivers/scsi/bfa/bfad_im.c +++ b/drivers/scsi/bfa/bfad_im.c @@ -948,7 +948,7 @@ bfad_os_fc_host_init(struct bfad_im_port_s *im_port) if (bfad_supported_fc4s & (BFA_PORT_ROLE_FCP_IM | BFA_PORT_ROLE_FCP_TM)) /* For FCP type 0x08 */ fc_host_supported_fc4s(host)[2] = 1; - if (bfad_supported_fc4s | BFA_PORT_ROLE_FCP_IPFC) + if (bfad_supported_fc4s & BFA_PORT_ROLE_FCP_IPFC) /* For LLC/SNAP type 0x05 */ fc_host_supported_fc4s(host)[3] = 0x20; /* For fibre channel services type 0x20 */ From e8edb3cbd7dd8acf6c748a02d06ec1d82c4124ea Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Tue, 3 Nov 2009 10:32:03 -0500 Subject: [PATCH 085/743] crypto: padlock-aes - Use the correct mask when checking whether copying is required Masking with PAGE_SIZE is just wrong... Signed-off-by: Chuck Ebbert Signed-off-by: Herbert Xu --- drivers/crypto/padlock-aes.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c index a9952b1236b0..84c51e177269 100644 --- a/drivers/crypto/padlock-aes.c +++ b/drivers/crypto/padlock-aes.c @@ -236,7 +236,7 @@ static inline void ecb_crypt(const u8 *in, u8 *out, u32 *key, /* Padlock in ECB mode fetches at least ecb_fetch_bytes of data. * We could avoid some copying here but it's probably not worth it. */ - if (unlikely(((unsigned long)in & PAGE_SIZE) + ecb_fetch_bytes > PAGE_SIZE)) { + if (unlikely(((unsigned long)in & ~PAGE_MASK) + ecb_fetch_bytes > PAGE_SIZE)) { ecb_crypt_copy(in, out, key, cword, count); return; } @@ -248,7 +248,7 @@ static inline u8 *cbc_crypt(const u8 *in, u8 *out, u32 *key, u8 *iv, struct cword *cword, int count) { /* Padlock in CBC mode fetches at least cbc_fetch_bytes of data. */ - if (unlikely(((unsigned long)in & PAGE_SIZE) + cbc_fetch_bytes > PAGE_SIZE)) + if (unlikely(((unsigned long)in & ~PAGE_MASK) + cbc_fetch_bytes > PAGE_SIZE)) return cbc_crypt_copy(in, out, key, iv, cword, count); return rep_xcrypt_cbc(in, out, key, iv, cword, count); From 7825cf10e31c64ece3cac66fb01a742f1094da51 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 20 Oct 2009 15:28:21 +0900 Subject: [PATCH 086/743] xen/hvc: make sure console output is always emitted, with explicit polling We never want to rely on the hvc workqueue to emit output, because the most interesting output is when the kernel is broken. This will improve oops/crash/console message for better debugging. Instead, we force-poll until all output is emitted. Signed-off-by: Jeremy Fitzhardinge Cc: Stable Kernel --- drivers/char/hvc_xen.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c index eba999f8598d..a6ee32b599a8 100644 --- a/drivers/char/hvc_xen.c +++ b/drivers/char/hvc_xen.c @@ -55,7 +55,7 @@ static inline void notify_daemon(void) notify_remote_via_evtchn(xen_start_info->console.domU.evtchn); } -static int write_console(uint32_t vtermno, const char *data, int len) +static int __write_console(const char *data, int len) { struct xencons_interface *intf = xencons_interface(); XENCONS_RING_IDX cons, prod; @@ -76,6 +76,29 @@ static int write_console(uint32_t vtermno, const char *data, int len) return sent; } +static int write_console(uint32_t vtermno, const char *data, int len) +{ + int ret = len; + + /* + * Make sure the whole buffer is emitted, polling if + * necessary. We don't ever want to rely on the hvc daemon + * because the most interesting console output is when the + * kernel is crippled. + */ + while (len) { + int sent = __write_console(data, len); + + data += sent; + len -= sent; + + if (unlikely(len)) + HYPERVISOR_sched_op(SCHEDOP_yield, NULL); + } + + return ret; +} + static int read_console(uint32_t vtermno, char *buf, int len) { struct xencons_interface *intf = xencons_interface(); From 82d6469916c6fcfa345636a49004c9d1753905d1 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 22 Oct 2009 16:41:15 -0700 Subject: [PATCH 087/743] xen: mask extended topology info in cpuid A Xen guest never needs to know about extended topology, and knowing would just confuse it. This patch just zeros ebx in leaf 0xb which indicates no topology info, preventing a crash under Xen on cpus which support this leaf. Signed-off-by: Jeremy Fitzhardinge Cc: Stable Kernel --- arch/x86/xen/enlighten.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 23a4d80fb39e..dfbf70e65860 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -178,6 +178,7 @@ static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0; static void xen_cpuid(unsigned int *ax, unsigned int *bx, unsigned int *cx, unsigned int *dx) { + unsigned maskebx = ~0; unsigned maskecx = ~0; unsigned maskedx = ~0; @@ -185,9 +186,16 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx, * Mask out inconvenient features, to try and disable as many * unsupported kernel subsystems as possible. */ - if (*ax == 1) { + switch (*ax) { + case 1: maskecx = cpuid_leaf1_ecx_mask; maskedx = cpuid_leaf1_edx_mask; + break; + + case 0xb: + /* Suppress extended topology stuff */ + maskebx = 0; + break; } asm(XEN_EMULATE_PREFIX "cpuid" @@ -197,6 +205,7 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx, "=d" (*dx) : "0" (*ax), "2" (*cx)); + *bx &= maskebx; *cx &= maskecx; *dx &= maskedx; } From 8c4db3355b0fcc9ad77431f15b955efa0645b5d0 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 3 Nov 2009 20:18:44 +0100 Subject: [PATCH 088/743] backing-dev: bdi sb prune should be in the unregister path, not destroy Commit 592b09a42fc3ae6737a0f3ecf4fee42ecd0296f8 was different from the tested path, in that it moved the bdi super_block prune from unregister to destroy context. This doesn't fully fix the sync hang bug on unexpected device removal, as need to prune the bdi cache pointer before killing flusher thread. Tested-by: Artur Skawina Signed-off-by: Jens Axboe --- mm/backing-dev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/backing-dev.c b/mm/backing-dev.c index 1065b715ef64..11aee09dd2a6 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -628,6 +628,8 @@ static void bdi_prune_sb(struct backing_dev_info *bdi) void bdi_unregister(struct backing_dev_info *bdi) { if (bdi->dev) { + bdi_prune_sb(bdi); + if (!bdi_cap_flush_forker(bdi)) bdi_wb_shutdown(bdi); bdi_debug_unregister(bdi); @@ -697,7 +699,6 @@ void bdi_destroy(struct backing_dev_info *bdi) spin_unlock(&inode_lock); } - bdi_prune_sb(bdi); bdi_unregister(bdi); for (i = 0; i < NR_BDI_STAT_ITEMS; i++) From e6ec4fe24572ee265723d895ec4159e5559c8266 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 3 Nov 2009 20:21:35 +0100 Subject: [PATCH 089/743] cfq-iosched: fix bad return value cfq_should_preempt() Commit a6151c3a5c8e1ff5a28450bc8d6a99a2a0add0a7 inadvertently reversed a preempt condition check, potentially causing a performance regression. Make the meta check correct again. Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 069a61017c02..5802e322b7ad 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -2051,7 +2051,7 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, * it's a metadata request and the current queue is doing regular IO. */ if (rq_is_meta(rq) && !cfqq->meta_pending) - return false; + return true; /* * Allow an RT request to pre-empt an ongoing non-RT cfqq timeslice. From 4b27e1bb442e964903f8a3fa6bdf33a602dc0941 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 3 Nov 2009 20:25:02 +0100 Subject: [PATCH 090/743] cfq-iosched: limit coop preemption CFQ has an optimization for cooperated applications. if several io-context have close requests, they will get boost. But the optimization get abused. Considering thread a, b, which work on one file. a reads sectors s, s+2, s+4, ...; b reads sectors s+1, s+3, s +5, ... Both a and b are sequential read, so they can open idle window. a reads a sector s and goes to idle window and wakeup b. b reads sector s+1, since in current implementation, cfq_should_preempt() thinks a and b are cooperators, b will preempt a. b then reads sector s+1 and goes to idle window and wakeup a. for the same reason, a will preempt b and reads s+2. a and b will continue the circle. The circle will be very long, and a and b will occupy whole disk queue. Other applications will nearly have no chance to run. Fix this limiting coop preempt until a queue is scheduled normally again. Signed-off-by: Shaohua Li Acked-by: Jeff Moyer Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 5802e322b7ad..aa1e9535e358 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -196,6 +196,7 @@ enum cfqq_state_flags { CFQ_CFQQ_FLAG_slice_new, /* no requests dispatched in slice */ CFQ_CFQQ_FLAG_sync, /* synchronous queue */ CFQ_CFQQ_FLAG_coop, /* has done a coop jump of the queue */ + CFQ_CFQQ_FLAG_coop_preempt, /* coop preempt */ }; #define CFQ_CFQQ_FNS(name) \ @@ -222,6 +223,7 @@ CFQ_CFQQ_FNS(prio_changed); CFQ_CFQQ_FNS(slice_new); CFQ_CFQQ_FNS(sync); CFQ_CFQQ_FNS(coop); +CFQ_CFQQ_FNS(coop_preempt); #undef CFQ_CFQQ_FNS #define cfq_log_cfqq(cfqd, cfqq, fmt, args...) \ @@ -945,10 +947,13 @@ static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd, { if (!cfqq) { cfqq = cfq_get_next_queue(cfqd); - if (cfqq) + if (cfqq && !cfq_cfqq_coop_preempt(cfqq)) cfq_clear_cfqq_coop(cfqq); } + if (cfqq) + cfq_clear_cfqq_coop_preempt(cfqq); + __cfq_set_active_queue(cfqd, cfqq); return cfqq; } @@ -2066,8 +2071,16 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, * if this request is as-good as one we would expect from the * current cfqq, let it preempt */ - if (cfq_rq_close(cfqd, rq)) + if (cfq_rq_close(cfqd, rq) && (!cfq_cfqq_coop(new_cfqq) || + cfqd->busy_queues == 1)) { + /* + * Mark new queue coop_preempt, so its coop flag will not be + * cleared when new queue gets scheduled at the very first time + */ + cfq_mark_cfqq_coop_preempt(new_cfqq); + cfq_mark_cfqq_coop(new_cfqq); return true; + } return false; } From e65cc194f7628ecaa02462f22f42fb09b50dcd49 Mon Sep 17 00:00:00 2001 From: Mark Nelson Date: Tue, 3 Nov 2009 20:06:48 +1100 Subject: [PATCH 091/743] ahci: Enable SB600 64bit DMA on MSI K9A2 Platinum v2 Like the Asus M2A-VM, MSI's K9A2 Platinum (MS-7376) can also support 64bit DMA. It is a new enough board that all the BIOS releases work correctly with 64bit DMA enabled. Signed-off-by: Mark Nelson Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 40 +++++++++++++++++++++++++++++++++++----- 1 file changed, 35 insertions(+), 5 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index a06f5d6375a8..a3241a1a710b 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -2718,6 +2718,30 @@ static bool ahci_sb600_enable_64bit(struct pci_dev *pdev) }, .driver_data = "20071026", /* yyyymmdd */ }, + /* + * All BIOS versions for the MSI K9A2 Platinum (MS-7376) + * support 64bit DMA. + * + * BIOS versions earlier than 1.5 had the Manufacturer DMI + * fields as "MICRO-STAR INTERANTIONAL CO.,LTD". + * This spelling mistake was fixed in BIOS version 1.5, so + * 1.5 and later have the Manufacturer as + * "MICRO-STAR INTERNATIONAL CO.,LTD". + * So try to match on DMI_BOARD_VENDOR of "MICRO-STAR INTER". + * + * BIOS versions earlier than 1.9 had a Board Product Name + * DMI field of "MS-7376". This was changed to be + * "K9A2 Platinum (MS-7376)" in version 1.9, but we can still + * match on DMI_BOARD_NAME of "MS-7376". + */ + { + .ident = "MSI K9A2 Platinum", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, + "MICRO-STAR INTER"), + DMI_MATCH(DMI_BOARD_NAME, "MS-7376"), + }, + }, { } }; const struct dmi_system_id *match; @@ -2729,18 +2753,24 @@ static bool ahci_sb600_enable_64bit(struct pci_dev *pdev) !match) return false; + if (!match->driver_data) + goto enable_64bit; + dmi_get_date(DMI_BIOS_DATE, &year, &month, &date); snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date); - if (strcmp(buf, match->driver_data) >= 0) { - dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n", - match->ident); - return true; - } else { + if (strcmp(buf, match->driver_data) >= 0) + goto enable_64bit; + else { dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, " "forcing 32bit DMA, update BIOS\n", match->ident); return false; } + +enable_64bit: + dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n", + match->ident); + return true; } static bool ahci_broken_system_poweroff(struct pci_dev *pdev) From a1104016ce8f7750ecd8ca6129786bc549aa5c38 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 17 Oct 2009 08:41:47 +0200 Subject: [PATCH 092/743] drivers/ata/libata: Move dereference after NULL test In each case, if the NULL test on qc is needed, then the derefernce should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // Signed-off-by: Julia Lawall Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index d7f0f1b1ae3e..dc72690ed5db 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4919,10 +4919,11 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) */ void ata_qc_free(struct ata_queued_cmd *qc) { - struct ata_port *ap = qc->ap; + struct ata_port *ap; unsigned int tag; WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ + ap = qc->ap; qc->flags = 0; tag = qc->tag; @@ -4934,11 +4935,13 @@ void ata_qc_free(struct ata_queued_cmd *qc) void __ata_qc_complete(struct ata_queued_cmd *qc) { - struct ata_port *ap = qc->ap; - struct ata_link *link = qc->dev->link; + struct ata_port *ap; + struct ata_link *link; WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE)); + ap = qc->ap; + link = qc->dev->link; if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) ata_sg_clean(qc); From f38e35b43f2924b3b4e51147b7193f32e9276db4 Mon Sep 17 00:00:00 2001 From: "JosephChan@via.com.tw" Date: Mon, 2 Nov 2009 19:36:08 +0800 Subject: [PATCH 093/743] sata_via: Remove redundant device ID for VIA VT8261 Just remove redundant device ID for VIA VT8261. The device ID 0x9000 and 0x9040 are redundant (for VT8261). The 0x9040 is reserved for other usage. Signed-off-by: Joseph Chan Signed-off-by: Jeff Garzik --- drivers/ata/sata_via.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index bdd43c7f432e..02efd9a83d26 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -93,7 +93,6 @@ static const struct pci_device_id svia_pci_tbl[] = { { PCI_VDEVICE(VIA, 0x7372), vt6420 }, { PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */ { PCI_VDEVICE(VIA, 0x9000), vt8251 }, - { PCI_VDEVICE(VIA, 0x9040), vt8251 }, { } /* terminate list */ }; From 109f55651954def97fa41ee71c464d268c512ab0 Mon Sep 17 00:00:00 2001 From: Mingming Date: Tue, 10 Nov 2009 10:48:08 -0500 Subject: [PATCH 094/743] ext4: fix ext4_ext_direct_IO()'s return value after converting uninit extents After a direct I/O request covering an uninitalized extent (i.e., created using the fallocate system call) or a hole in a file, ext4 will convert the uninitialized extent so it is marked as initialized by calling ext4_convert_unwritten_extents(). This function returns zero on success. This return value was getting returned by ext4_direct_IO(); however the file system's direct_IO function is supposed to return the number of bytes read or written on a success. By returning zero, it confused the direct I/O code into falling back to buffered I/O unnecessarily. Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" --- fs/ext4/extents.c | 1 + fs/ext4/inode.c | 10 +++++++--- 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 10539e364283..441716f33b4a 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3519,6 +3519,7 @@ retry: * * This function is called from the direct IO end io call back * function, to convert the fallocated extents after IO is completed. + * Returns 0 on success. */ int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset, loff_t len) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index d1ec698a91d1..12d727f8fedf 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3772,13 +3772,17 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, if (ret != -EIOCBQUEUED && ret <= 0 && iocb->private) { ext4_free_io_end(iocb->private); iocb->private = NULL; - } else if (ret > 0) + } else if (ret > 0) { + int err; /* * for non AIO case, since the IO is already * completed, we could do the convertion right here */ - ret = ext4_convert_unwritten_extents(inode, - offset, ret); + err = ext4_convert_unwritten_extents(inode, + offset, ret); + if (err < 0) + ret = err; + } return ret; } From 5f5249507e4b5c4fc0f9c93f33d133d8c95f47e1 Mon Sep 17 00:00:00 2001 From: Mingming Date: Tue, 10 Nov 2009 10:48:04 -0500 Subject: [PATCH 095/743] ext4: skip conversion of uninit extents after direct IO if there isn't any At the end of direct I/O operation, ext4_ext_direct_IO() always called ext4_convert_unwritten_extents(), regardless of whether there were any unwritten extents involved in the I/O or not. This commit adds a state flag so that ext4_ext_direct_IO() only calls ext4_convert_unwritten_extents() when necessary. Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" --- fs/ext4/ext4.h | 1 + fs/ext4/extents.c | 22 +++++++++++++++++----- fs/ext4/inode.c | 4 +++- 3 files changed, 21 insertions(+), 6 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 00d153f2f261..8825515eeddd 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -322,6 +322,7 @@ static inline __u32 ext4_mask_flags(umode_t mode, __u32 flags) #define EXT4_STATE_NO_EXPAND 0x00000008 /* No space for expansion */ #define EXT4_STATE_DA_ALLOC_CLOSE 0x00000010 /* Alloc DA blks on close */ #define EXT4_STATE_EXT_MIGRATE 0x00000020 /* Inode is migrating */ +#define EXT4_STATE_DIO_UNWRITTEN 0x00000040 /* need convert on dio done*/ /* Used to pass group descriptor data when online resize is done */ struct ext4_new_group_input { diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 441716f33b4a..e991ae2b461c 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3048,12 +3048,18 @@ ext4_ext_handle_uninitialized_extents(handle_t *handle, struct inode *inode, ret = ext4_split_unwritten_extents(handle, inode, path, iblock, max_blocks, flags); - /* flag the io_end struct that we need convert when IO done */ + /* + * Flag the inode(non aio case) or end_io struct (aio case) + * that this IO needs to convertion to written when IO is + * completed + */ if (io) io->flag = DIO_AIO_UNWRITTEN; + else + EXT4_I(inode)->i_state |= EXT4_STATE_DIO_UNWRITTEN; goto out; } - /* DIO end_io complete, convert the filled extent to written */ + /* async DIO end_io complete, convert the filled extent to written */ if (flags == EXT4_GET_BLOCKS_DIO_CONVERT_EXT) { ret = ext4_convert_unwritten_extents_dio(handle, inode, path); @@ -3295,10 +3301,16 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode, * To avoid unecessary convertion for every aio dio rewrite * to the mid of file, here we flag the IO that is really * need the convertion. - * + * For non asycn direct IO case, flag the inode state + * that we need to perform convertion when IO is done. */ - if (io && flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT) - io->flag = DIO_AIO_UNWRITTEN; + if (flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT) { + if (io) + io->flag = DIO_AIO_UNWRITTEN; + else + EXT4_I(inode)->i_state |= + EXT4_STATE_DIO_UNWRITTEN;; + } } err = ext4_ext_insert_extent(handle, inode, path, &newex, flags); if (err) { diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 12d727f8fedf..a9ed2bce74d1 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3772,7 +3772,8 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, if (ret != -EIOCBQUEUED && ret <= 0 && iocb->private) { ext4_free_io_end(iocb->private); iocb->private = NULL; - } else if (ret > 0) { + } else if (ret > 0 && (EXT4_I(inode)->i_state & + EXT4_STATE_DIO_UNWRITTEN)) { int err; /* * for non AIO case, since the IO is already @@ -3782,6 +3783,7 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, offset, ret); if (err < 0) ret = err; + EXT4_I(inode)->i_state &= ~EXT4_STATE_DIO_UNWRITTEN; } return ret; } From 4b70df181611012a3556f017b57dfcef7e1d279f Mon Sep 17 00:00:00 2001 From: Mingming Date: Tue, 3 Nov 2009 14:44:54 -0500 Subject: [PATCH 096/743] ext4: code clean up for dio fallocate handling The ext4_debug() call in ext4_end_io_dio() should be moved after the check to make sure that io_end is non-NULL. The comment above ext4_get_block_dio_write() ("Maximum number of blocks...") is a duplicate; the original and correct comment is above the #define DIO_MAX_BLOCKS up above. Based on review comments from Curt Wohlgemuth. Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index a9ed2bce74d1..2c8caa51addb 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3446,8 +3446,6 @@ out: return ret; } -/* Maximum number of blocks we map for direct IO at once. */ - static int ext4_get_block_dio_write(struct inode *inode, sector_t iblock, struct buffer_head *bh_result, int create) { @@ -3655,13 +3653,14 @@ static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset, ext4_io_end_t *io_end = iocb->private; struct workqueue_struct *wq; + /* if not async direct IO or dio with 0 bytes write, just return */ + if (!io_end || !size) + return; + ext_debug("ext4_end_io_dio(): io_end 0x%p" "for inode %lu, iocb 0x%p, offset %llu, size %llu\n", iocb->private, io_end->inode->i_ino, iocb, offset, size); - /* if not async direct IO or dio with 0 bytes write, just return */ - if (!io_end || !size) - return; /* if not aio dio with unwritten extents, just free io and return */ if (io_end->flag != DIO_AIO_UNWRITTEN){ From 560235857fb79da48d36e8f866a0ee3b10a232bf Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 2 Aug 2009 10:47:27 +0200 Subject: [PATCH 097/743] arch/m32r: Use DIV_ROUND_CLOSEST The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @haskernel@ @@ @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // Signed-off-by: Julia Lawall Signed-off-by: Hirokazu Takata --- arch/m32r/kernel/time.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c index e7fee0f198d5..9cedcef11575 100644 --- a/arch/m32r/kernel/time.c +++ b/arch/m32r/kernel/time.c @@ -75,7 +75,7 @@ u32 arch_gettimeoffset(void) count = 0; count = (latch - count) * TICK_SIZE; - elapsed_time = (count + latch / 2) / latch; + elapsed_time = DIV_ROUND_CLOSEST(count, latch); /* NOTE: LATCH is equal to the "interval" value (= reload count). */ #else /* CONFIG_SMP */ @@ -93,7 +93,7 @@ u32 arch_gettimeoffset(void) p_count = count; count = (latch - count) * TICK_SIZE; - elapsed_time = (count + latch / 2) / latch; + elapsed_time = DIV_ROUND_CLOSEST(count, latch); /* NOTE: LATCH is equal to the "interval" value (= reload count). */ #endif /* CONFIG_SMP */ #elif defined(CONFIG_CHIP_M32310) @@ -211,7 +211,7 @@ void __init time_init(void) bus_clock = boot_cpu_data.bus_clock; divide = boot_cpu_data.timer_divide; - latch = (bus_clock/divide + HZ / 2) / HZ; + latch = DIV_ROUND_CLOSEST(bus_clock/divide, HZ); printk("Timer start : latch = %ld\n", latch); From e968b8d404ae8ab4ef218cd145f6dcb71e65154b Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Mon, 5 Oct 2009 00:10:55 +0900 Subject: [PATCH 098/743] m32r: add NOTES to vmlinux.lds.S to remove .note.gnu.build-id section Building with --build-id option, .note.gnu.build-id section is added to vmlinux.bin. But some old buggy binutils creates a huge vmlinux.bin, and a bootloader fails to boot its zImage as well. This patch adds a NOTES macro to a linker script vmlinux.ld.S to put .note.gnu.build-id section into .note section. Then, the .note section will be removed, because "-R .note" option is specified in OBJCOPYFLAGS to make a vmlinux.bin binary. Signed-off-by: Hirokazu Takata --- arch/m32r/kernel/vmlinux.lds.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index 8ceb6181d805..7da94eaa082b 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -42,6 +42,8 @@ SECTIONS _etext = .; /* End of text section */ EXCEPTION_TABLE(16) + NOTES + RODATA RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE) _edata = .; /* End of data section */ From 337214e8c6b0c777713b2483749f9c03102a416c Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Thu, 15 Oct 2009 09:21:56 +0900 Subject: [PATCH 099/743] m32r: bzip2/lzma kernel compression support - Support bzip2 and lzma kernel compression for m32r. - Clean up arch/m32r/boot/compressed/misc.c. Signed-off-by: Hirokazu Takata --- arch/m32r/Kconfig | 3 + arch/m32r/boot/compressed/Makefile | 16 +++- arch/m32r/boot/compressed/misc.c | 143 ++++++----------------------- 3 files changed, 42 insertions(+), 120 deletions(-) diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index c41234f1b825..3a9319f93e89 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -11,6 +11,9 @@ config M32R select HAVE_IDE select HAVE_OPROFILE select INIT_ALL_POSSIBLE + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZMA config SBUS bool diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile index 560484ae35ec..1003880d0dfd 100644 --- a/arch/m32r/boot/compressed/Makefile +++ b/arch/m32r/boot/compressed/Makefile @@ -4,8 +4,8 @@ # create a compressed vmlinux image from the original vmlinux # -targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \ - piggy.o vmlinux.lds +targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \ + vmlinux.bin.lzma head.o misc.o piggy.o vmlinux.lds OBJECTS = $(obj)/head.o $(obj)/misc.o @@ -27,6 +27,12 @@ $(obj)/vmlinux.bin: vmlinux FORCE $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) +$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE + $(call if_changed,bzip2) + +$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE + $(call if_changed,lzma) + CFLAGS_misc.o += -fpic ifdef CONFIG_MMU @@ -37,5 +43,9 @@ endif OBJCOPYFLAGS += -R .empty_zero_page -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE +suffix_$(CONFIG_KERNEL_GZIP) = gz +suffix_$(CONFIG_KERNEL_BZIP2) = bz2 +suffix_$(CONFIG_KERNEL_LZMA) = lzma + +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE $(call if_changed,ld) diff --git a/arch/m32r/boot/compressed/misc.c b/arch/m32r/boot/compressed/misc.c index d394292498c0..370d60881977 100644 --- a/arch/m32r/boot/compressed/misc.c +++ b/arch/m32r/boot/compressed/misc.c @@ -9,140 +9,49 @@ * Adapted for SH by Stuart Menefy, Aug 1999 * * 2003-02-12: Support M32R by Takeo Takahashi - * This is based on arch/sh/boot/compressed/misc.c. */ -#include - /* * gzip declarations */ - -#define OF(args) args #define STATIC static #undef memset #undef memcpy #define memzero(s, n) memset ((s), 0, (n)) -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define WSIZE 0x8000 /* Window size must be at least 32k, */ - /* and a power of two */ - -static uch *inbuf; /* input buffer */ -static uch window[WSIZE]; /* Sliding window buffer */ - -static unsigned insize = 0; /* valid bytes in inbuf */ -static unsigned inptr = 0; /* index of next byte to be processed in inbuf */ -static unsigned outcnt = 0; /* bytes in output buffer */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) - -/* Diagnostic functions */ -#ifdef DEBUG -# define Assert(cond,msg) {if(!(cond)) error(msg);} -# define Trace(x) fprintf x -# define Tracev(x) {if (verbose) fprintf x ;} -# define Tracevv(x) {if (verbose>1) fprintf x ;} -# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} -# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} -#else -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -#endif - -static int fill_inbuf(void); -static void flush_window(void); static void error(char *m); -static unsigned char *input_data; -static int input_len; - -static long bytes_out = 0; -static uch *output_data; -static unsigned long output_ptr = 0; - #include "m32r_sio.c" static unsigned long free_mem_ptr; static unsigned long free_mem_end_ptr; -#define HEAP_SIZE 0x10000 - -#include "../../../../lib/inflate.c" - -void* memset(void* s, int c, size_t n) +#ifdef CONFIG_KERNEL_BZIP2 +static void *memset(void *s, int c, size_t n) { - int i; - char *ss = (char*)s; + char *ss = s; - for (i=0;i> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - output_ptr += (ulg)outcnt; - outcnt = 0; -} +#ifdef CONFIG_KERNEL_LZMA +#define BOOT_HEAP_SIZE 0x10000 +#include "../../../../lib/decompress_unlzma.c" +#endif static void error(char *x) { @@ -153,20 +62,20 @@ static void error(char *x) while(1); /* Halt */ } -/* return decompressed size */ void decompress_kernel(int mmu_on, unsigned char *zimage_data, unsigned int zimage_len, unsigned long heap) { + unsigned char *input_data = zimage_data; + int input_len = zimage_len; + unsigned char *output_data; + output_data = (unsigned char *)CONFIG_MEMORY_START + 0x2000 + (mmu_on ? 0x80000000 : 0); free_mem_ptr = heap; - free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; - input_data = zimage_data; - input_len = zimage_len; + free_mem_end_ptr = free_mem_ptr + BOOT_HEAP_SIZE; - makecrc(); - puts("Uncompressing Linux... "); - gunzip(); - puts("Ok, booting the kernel.\n"); + puts("\nDecompressing Linux... "); + decompress(input_data, input_len, NULL, NULL, output_data, NULL, error); + puts("done.\nBooting the kernel.\n"); } From 45cdd473301aae36e1f10664b9fe7ef5aad3f182 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 1 Nov 2009 15:33:06 +0100 Subject: [PATCH 100/743] m32r: Should index be positive? Index `ipi_num' is signed, test whether it is negative to make sure we don't get a negative array element. Signed-off-by: Roel Kluin Signed-off-by: Hirokazu Takata --- arch/m32r/kernel/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c index 8a88f1f0a3e2..31cef20b2996 100644 --- a/arch/m32r/kernel/smp.c +++ b/arch/m32r/kernel/smp.c @@ -806,7 +806,7 @@ unsigned long send_IPI_mask_phys(cpumask_t physid_mask, int ipi_num, if (mask & ~physids_coerce(phys_cpu_present_map)) BUG(); - if (ipi_num >= NR_IPIS) + if (ipi_num >= NR_IPIS || ipi_num < 0) BUG(); mask <<= IPI_SHIFT; From df67bed92fa86ef926da8b62a6da68722388ff72 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 30 Oct 2009 13:31:26 +1000 Subject: [PATCH 101/743] drm/radeon/kms: fix coherency issues on AGP cards. When we are evicting from VRAM->RAM we allocate the ttm object, but we don't set the caching policy on it before blitting into it. This means on AGP we end up blitting into cached pages, and the CPU later flushes out on top of them. This was mostly seen as font corruption. The other question is why we don't evict VRAM->GTT in a lot of cases, this would save us some cache transitions since a lot of objects that are evicted from VRAM will probably end up being pulled back in a few operations later, and evicting them to system memory involves 2 unnecessary cache transitions. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_ttm.c | 6 ++++++ drivers/gpu/drm/ttm/ttm_tt.c | 1 + 2 files changed, 7 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index c729cd1a7506..f489c0de6f13 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -295,6 +295,12 @@ static int radeon_move_vram_ram(struct ttm_buffer_object *bo, if (unlikely(r)) { return r; } + + r = ttm_tt_set_placement_caching(bo->ttm, tmp_mem.placement); + if (unlikely(r)) { + goto out_cleanup; + } + r = ttm_tt_bind(bo->ttm, &tmp_mem); if (unlikely(r)) { goto out_cleanup; diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index a55ee1a56c16..7bcb89f39ce8 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -279,6 +279,7 @@ int ttm_tt_set_placement_caching(struct ttm_tt *ttm, uint32_t placement) return ttm_tt_set_caching(ttm, state); } +EXPORT_SYMBOL(ttm_tt_set_placement_caching); static void ttm_tt_free_alloced_pages(struct ttm_tt *ttm) { From d6f28938d9426d12eea1578949f1d73d24ad37ec Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 2 Nov 2009 16:01:27 -0500 Subject: [PATCH 102/743] drm/radeon/kms: Don't RMW CP_RB_CNTL Immediate readback seems faulty on some chips. I suspect it takes a while to get through the fifo to the actual register backbone. There's no need to read it back, so, just write the driver's copy of the register's value directly. Should fix bug 24535 and possibly 24218 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 12 ++++++------ drivers/gpu/drm/radeon/r600.c | 8 +++----- 2 files changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index b438b520ee7f..5e821a313a8c 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -578,19 +578,19 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size) indirect1_start = 16; /* cp setup */ WREG32(0x718, pre_write_timer | (pre_write_limit << 28)); - WREG32(RADEON_CP_RB_CNTL, -#ifdef __BIG_ENDIAN - RADEON_BUF_SWAP_32BIT | -#endif - REG_SET(RADEON_RB_BUFSZ, rb_bufsz) | + tmp = (REG_SET(RADEON_RB_BUFSZ, rb_bufsz) | REG_SET(RADEON_RB_BLKSZ, rb_blksz) | REG_SET(RADEON_MAX_FETCH, max_fetch) | RADEON_RB_NO_UPDATE); +#ifdef __BIG_ENDIAN + tmp |= RADEON_BUF_SWAP_32BIT; +#endif + WREG32(RADEON_CP_RB_CNTL, tmp); + /* Set ring address */ DRM_INFO("radeon: ring at 0x%016lX\n", (unsigned long)rdev->cp.gpu_addr); WREG32(RADEON_CP_RB_BASE, rdev->cp.gpu_addr); /* Force read & write ptr to 0 */ - tmp = RREG32(RADEON_CP_RB_CNTL); WREG32(RADEON_CP_RB_CNTL, tmp | RADEON_RB_RPTR_WR_ENA); WREG32(RADEON_CP_RB_RPTR_WR, 0); WREG32(RADEON_CP_RB_WPTR, 0); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index e87475c87d52..60fbb236edfd 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1272,19 +1272,17 @@ int r600_cp_resume(struct radeon_device *rdev) /* Set ring buffer size */ rb_bufsz = drm_order(rdev->cp.ring_size / 8); + tmp = RB_NO_UPDATE | (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz; #ifdef __BIG_ENDIAN - WREG32(CP_RB_CNTL, BUF_SWAP_32BIT | RB_NO_UPDATE | - (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz); -#else - WREG32(CP_RB_CNTL, RB_NO_UPDATE | (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz); + tmp |= BUF_SWAP_32BIT; #endif + WREG32(CP_RB_CNTL, tmp); WREG32(CP_SEM_WAIT_TIMER, 0x4); /* Set the write pointer delay */ WREG32(CP_RB_WPTR_DELAY, 0); /* Initialize the ring buffer's read and write pointers */ - tmp = RREG32(CP_RB_CNTL); WREG32(CP_RB_CNTL, tmp | RB_RPTR_WR_ENA); WREG32(CP_RB_RPTR_WR, 0); WREG32(CP_RB_WPTR, 0); From 8a9832e89ff1bc7a039c8f966f07101570be3d5e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 3 Nov 2009 13:23:15 +1000 Subject: [PATCH 103/743] drm/radeon/kms: disable D1VGA and D2VGA if enabled Once kms is enabled we don't need these, and it causes a problem with the Lenovo W500 ACPI brightness implementation, it hangs in a loop inside an SMI. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/rv515.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 41a34c23e6d8..03c052d892c0 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -137,6 +137,8 @@ int rv515_mc_wait_for_idle(struct radeon_device *rdev) void rv515_vga_render_disable(struct radeon_device *rdev) { + WREG32(R_000330_D1VGA_CONTROL, 0); + WREG32(R_000338_D2VGA_CONTROL, 0); WREG32(R_000300_VGA_RENDER_CONTROL, RREG32(R_000300_VGA_RENDER_CONTROL) & C_000300_VGA_VSTATUS_CNTL); } From 4d357abb895ec51f1cbdebb1fbbf4d4576900a2e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 3 Nov 2009 14:54:36 +1000 Subject: [PATCH 104/743] drm/radeon/kms: stop putting VRAM at 0 in MC space on r600s. The Lenovo W500 laptop hangs inside an SMI on brightness changes, I thought it just needed the VGA disable but it turned out to require slightly more work, setting the MC locations up just like the IGP chip requirements seems to make it all happy again and I can boot and play with brightness. We should probably just do this for all chips and give up the VRAM at 0x0 idea, it never seems to buy us anything but pain. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 48 +++++++++++++++-------------------- 1 file changed, 21 insertions(+), 27 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 60fbb236edfd..3e5703f324bd 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -409,35 +409,29 @@ int r600_mc_init(struct radeon_device *rdev) rdev->mc.gtt_location = rdev->mc.mc_vram_size; } } else { - if (rdev->family == CHIP_RS780 || rdev->family == CHIP_RS880) { - rdev->mc.vram_location = (RREG32(MC_VM_FB_LOCATION) & - 0xFFFF) << 24; - rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; - tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size; - if ((0xFFFFFFFFUL - tmp) >= rdev->mc.gtt_size) { - /* Enough place after vram */ - rdev->mc.gtt_location = tmp; - } else if (rdev->mc.vram_location >= rdev->mc.gtt_size) { - /* Enough place before vram */ - rdev->mc.gtt_location = 0; - } else { - /* Not enough place after or before shrink - * gart size - */ - if (rdev->mc.vram_location > (0xFFFFFFFFUL - tmp)) { - rdev->mc.gtt_location = 0; - rdev->mc.gtt_size = rdev->mc.vram_location; - } else { - rdev->mc.gtt_location = tmp; - rdev->mc.gtt_size = 0xFFFFFFFFUL - tmp; - } - } - rdev->mc.gtt_location = rdev->mc.mc_vram_size; + rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; + rdev->mc.vram_location = (RREG32(MC_VM_FB_LOCATION) & + 0xFFFF) << 24; + tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size; + if ((0xFFFFFFFFUL - tmp) >= rdev->mc.gtt_size) { + /* Enough place after vram */ + rdev->mc.gtt_location = tmp; + } else if (rdev->mc.vram_location >= rdev->mc.gtt_size) { + /* Enough place before vram */ + rdev->mc.gtt_location = 0; } else { - rdev->mc.vram_location = 0x00000000UL; - rdev->mc.gtt_location = rdev->mc.mc_vram_size; - rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; + /* Not enough place after or before shrink + * gart size + */ + if (rdev->mc.vram_location > (0xFFFFFFFFUL - tmp)) { + rdev->mc.gtt_location = 0; + rdev->mc.gtt_size = rdev->mc.vram_location; + } else { + rdev->mc.gtt_location = tmp; + rdev->mc.gtt_size = 0xFFFFFFFFUL - tmp; + } } + rdev->mc.gtt_location = rdev->mc.mc_vram_size; } rdev->mc.vram_start = rdev->mc.vram_location; rdev->mc.vram_end = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1; From 6fa8d66af83710b3610bd3b2581f051074f2b416 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 3 Nov 2009 16:10:36 -0500 Subject: [PATCH 105/743] drm/radeon/kms: remove some misleading debugging output Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_bios.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index 34a9b9119518..906921740c60 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -50,19 +50,16 @@ static bool igp_read_bios_from_vram(struct radeon_device *rdev) vram_base = drm_get_resource_start(rdev->ddev, 0); bios = ioremap(vram_base, size); if (!bios) { - DRM_ERROR("Unable to mmap vram\n"); return false; } if (size == 0 || bios[0] != 0x55 || bios[1] != 0xaa) { iounmap(bios); - DRM_ERROR("bad rom signature\n"); return false; } rdev->bios = kmalloc(size, GFP_KERNEL); if (rdev->bios == NULL) { iounmap(bios); - DRM_ERROR("kmalloc failed\n"); return false; } memcpy(rdev->bios, bios, size); From e29649db3bd5620499bf9bdcd63c5cf12edbd26e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 3 Nov 2009 10:04:01 -0500 Subject: [PATCH 106/743] drm/radeon/kms/r700: fix some typos in chip init Noticed by Andre on IRC. Also fix up some minor whitespace issues. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/rv770.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 40553913b928..ae074fdf804d 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -529,11 +529,11 @@ static void rv770_gpu_init(struct radeon_device *rdev) if (rdev->family == CHIP_RV770) gb_tiling_config |= BANK_TILING(1); else - gb_tiling_config |= BANK_TILING((mc_arb_ramcfg & NOOFBANK_SHIFT) >> NOOFBANK_MASK); + gb_tiling_config |= BANK_TILING((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT); gb_tiling_config |= GROUP_SIZE(0); - if (((mc_arb_ramcfg & NOOFROWS_MASK) & NOOFROWS_SHIFT) > 3) { + if (((mc_arb_ramcfg & NOOFROWS_MASK) >> NOOFROWS_SHIFT) > 3) { gb_tiling_config |= ROW_TILING(3); gb_tiling_config |= SAMPLE_SPLIT(3); } else { @@ -579,14 +579,14 @@ static void rv770_gpu_init(struct radeon_device *rdev) /* set HW defaults for 3D engine */ WREG32(CP_QUEUE_THRESHOLDS, (ROQ_IB1_START(0x16) | - ROQ_IB2_START(0x2b))); + ROQ_IB2_START(0x2b))); WREG32(CP_MEQ_THRESHOLDS, STQ_SPLIT(0x30)); WREG32(TA_CNTL_AUX, (DISABLE_CUBE_ANISO | - SYNC_GRADIENT | - SYNC_WALKER | - SYNC_ALIGNER)); + SYNC_GRADIENT | + SYNC_WALKER | + SYNC_ALIGNER)); sx_debug_1 = RREG32(SX_DEBUG_1); sx_debug_1 |= ENABLE_NEW_SMX_ADDRESS; @@ -598,9 +598,9 @@ static void rv770_gpu_init(struct radeon_device *rdev) WREG32(SMX_DC_CTL0, smx_dc_ctl0); WREG32(SMX_EVENT_CTL, (ES_FLUSH_CTL(4) | - GS_FLUSH_CTL(4) | - ACK_FLUSH_CTL(3) | - SYNC_FLUSH_CTL)); + GS_FLUSH_CTL(4) | + ACK_FLUSH_CTL(3) | + SYNC_FLUSH_CTL)); if (rdev->family == CHIP_RV770) WREG32(DB_DEBUG3, DB_CLK_OFF_DELAY(0x1f)); @@ -611,12 +611,12 @@ static void rv770_gpu_init(struct radeon_device *rdev) } WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.rv770.sx_max_export_size / 4) - 1) | - POSITION_BUFFER_SIZE((rdev->config.rv770.sx_max_export_pos_size / 4) - 1) | - SMX_BUFFER_SIZE((rdev->config.rv770.sx_max_export_smx_size / 4) - 1))); + POSITION_BUFFER_SIZE((rdev->config.rv770.sx_max_export_pos_size / 4) - 1) | + SMX_BUFFER_SIZE((rdev->config.rv770.sx_max_export_smx_size / 4) - 1))); WREG32(PA_SC_FIFO_SIZE, (SC_PRIM_FIFO_SIZE(rdev->config.rv770.sc_prim_fifo_size) | - SC_HIZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_hiz_tile_fifo_size) | - SC_EARLYZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_earlyz_tile_fifo_fize))); + SC_HIZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_hiz_tile_fifo_size) | + SC_EARLYZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_earlyz_tile_fifo_fize))); WREG32(PA_SC_MULTI_CHIP_CNTL, 0); From f7112949f6a4cd6883d66c882d568c2197321de6 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Tue, 3 Nov 2009 19:42:45 +0800 Subject: [PATCH 107/743] ring-buffer: Synchronize resizing buffer with reader lock We got a sudden panic when we reduced the size of the ringbuffer. We can reproduce the panic by the following steps: echo 1 > events/sched/enable cat trace_pipe > /dev/null & while ((1)) do echo 12000 > buffer_size_kb echo 512 > buffer_size_kb done (not more than 5 seconds, panic ...) Reported-by: KOSAKI Motohiro Signed-off-by: Lai Jiangshan LKML-Reference: <4AF01735.9060409@cn.fujitsu.com> Signed-off-by: Steven Rostedt --- kernel/trace/ring_buffer.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 3ffa502fb243..5dd017fea6f5 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -1193,6 +1193,7 @@ rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned nr_pages) atomic_inc(&cpu_buffer->record_disabled); synchronize_sched(); + spin_lock_irq(&cpu_buffer->reader_lock); rb_head_page_deactivate(cpu_buffer); for (i = 0; i < nr_pages; i++) { @@ -1207,6 +1208,7 @@ rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned nr_pages) return; rb_reset_cpu(cpu_buffer); + spin_unlock_irq(&cpu_buffer->reader_lock); rb_check_pages(cpu_buffer); From ed146b25942b428f8e8056587b7638ce76573c2f Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 3 Nov 2009 08:55:38 +0800 Subject: [PATCH 108/743] ftrace: Fix unmatched locking in ftrace_regex_write() When a command is passed to the set_ftrace_filter, then the ftrace_regex_lock is still held going back to user space. # echo 'do_open : foo' > set_ftrace_filter (still holding ftrace_regex_lock when returning to user space!) Signed-off-by: Li Zefan LKML-Reference: <4AEF7F8A.3080300@cn.fujitsu.com> Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 9c451a1930b6..6dc4e5ef7a01 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -2222,15 +2222,15 @@ ftrace_regex_write(struct file *file, const char __user *ubuf, ret = ftrace_process_regex(parser->buffer, parser->idx, enable); if (ret) - goto out; + goto out_unlock; trace_parser_clear(parser); } ret = read; - +out_unlock: mutex_unlock(&ftrace_regex_lock); -out: + return ret; } From 5bdaaada16363d64e10ae081755d1a8d392429f2 Mon Sep 17 00:00:00 2001 From: Vitaliy Kulikov Date: Wed, 4 Nov 2009 07:57:45 +0100 Subject: [PATCH 109/743] ALSA: hda - Enable GPIO control for mute LED on HP systems This patch enables GPIO to control mute LED indicator on the HP systems with the special string in BIOS and applies it with the correct polarity on HP B-series systems. It also restores configuration of the pin intended as the second Headphone on HP B-series systems but configured as something else in the BIOS to pass MS DTM. Signed-off-by: Vitaliy Kulikov Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 68 ++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 66c0876bf734..b513eba2d2f7 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -1693,6 +1694,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { "DFI LanParty", STAC_92HD71BXX_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fb, "HP dv4-1222nr", STAC_HP_DV4_1222NR), + SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x1720, + "HP", STAC_HP_DV5), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3080, "HP", STAC_HP_DV5), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x30f0, @@ -4730,6 +4733,26 @@ static int stac92xx_resume(struct hda_codec *codec) return 0; } +static int hp_bseries_system(u32 subsystem_id) +{ + switch (subsystem_id) { + case 0x103c307e: + case 0x103c307f: + case 0x103c3080: + case 0x103c3081: + case 0x103c1722: + case 0x103c1723: + case 0x103c1724: + case 0x103c1725: + case 0x103c1726: + case 0x103c1727: + case 0x103c1728: + case 0x103c1729: + return 1; + } + return 0; +} + /* * using power check for controlling mute led of HP notebooks * check for mute state only on Speakers (nid = 0x10) @@ -4754,6 +4777,11 @@ static int stac92xx_hp_check_power_status(struct hda_codec *codec, else spec->gpio_data |= spec->gpio_led; /* white */ + if (hp_bseries_system(codec->subsystem_id)) { + /* LED state is inverted on these systems */ + spec->gpio_data ^= spec->gpio_led; + } + stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, spec->gpio_data); @@ -5243,6 +5271,7 @@ static int patch_stac92hd71bxx(struct hda_codec *codec) { struct sigmatel_spec *spec; struct hda_verb *unmute_init = stac92hd71bxx_unmute_core_init; + unsigned int pin_cfg; int err = 0; spec = kzalloc(sizeof(*spec), GFP_KERNEL); @@ -5426,6 +5455,45 @@ again: break; } + if (hp_bseries_system(codec->subsystem_id)) { + pin_cfg = snd_hda_codec_get_pincfg(codec, 0x0f); + if (get_defcfg_device(pin_cfg) == AC_JACK_LINE_OUT || + get_defcfg_device(pin_cfg) == AC_JACK_SPEAKER || + get_defcfg_device(pin_cfg) == AC_JACK_HP_OUT) { + /* It was changed in the BIOS to just satisfy MS DTM. + * Lets turn it back into slaved HP + */ + pin_cfg = (pin_cfg & (~AC_DEFCFG_DEVICE)) + | (AC_JACK_HP_OUT << + AC_DEFCFG_DEVICE_SHIFT); + pin_cfg = (pin_cfg & (~(AC_DEFCFG_DEF_ASSOC + | AC_DEFCFG_SEQUENCE))) + | 0x1f; + snd_hda_codec_set_pincfg(codec, 0x0f, pin_cfg); + } + } + + if ((codec->subsystem_id >> 16) == PCI_VENDOR_ID_HP) { + const struct dmi_device *dev = NULL; + while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, + NULL, dev))) { + if (strcmp(dev->name, "HP_Mute_LED_1")) { + switch (codec->vendor_id) { + case 0x111d7608: + spec->gpio_led = 0x01; + break; + case 0x111d7600: + case 0x111d7601: + case 0x111d7602: + case 0x111d7603: + spec->gpio_led = 0x08; + break; + } + break; + } + } + } + #ifdef CONFIG_SND_HDA_POWER_SAVE if (spec->gpio_led) { spec->gpio_mask |= spec->gpio_led; From f60311d5f7670d9539b424e4ed8b5c0872fc9e83 Mon Sep 17 00:00:00 2001 From: "Anand V. Avati" Date: Thu, 22 Oct 2009 06:24:52 -0700 Subject: [PATCH 110/743] fuse: prevent fuse_put_request on invalid pointer fuse_direct_io() has a loop where requests are allocated in each iteration. if allocation fails, the loop is broken out and follows into an unconditional fuse_put_request() on that invalid pointer. Signed-off-by: Anand V. Avati Signed-off-by: Miklos Szeredi Cc: stable@kernel.org --- fs/fuse/file.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index a3492f7d207c..5887a6395ad2 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1063,7 +1063,8 @@ ssize_t fuse_direct_io(struct file *file, const char __user *buf, break; } } - fuse_put_request(fc, req); + if (!IS_ERR(req)) + fuse_put_request(fc, req); if (res > 0) *ppos = pos; From 0bd87182d3ab18a32a8e9175d3f68754c58e3432 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 3 Nov 2009 11:40:44 +0100 Subject: [PATCH 111/743] fuse: fix kunmap in fuse_ioctl_copy_user Looks like another victim of the confusing kmap() vs kmap_atomic() API differences. Reported-by: Todor Gyumyushev Signed-off-by: Jens Axboe Signed-off-by: Miklos Szeredi Cc: Tejun Heo Cc: stable@kernel.org --- fs/fuse/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 5887a6395ad2..c18913a777ae 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1600,7 +1600,7 @@ static int fuse_ioctl_copy_user(struct page **pages, struct iovec *iov, kaddr += copy; } - kunmap(map); + kunmap(page); } return 0; From 5219f346b0ea2a2a8821f1e966b190788c285b0b Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 4 Nov 2009 10:24:52 +0100 Subject: [PATCH 112/743] fuse: invalidate target of rename Invalidate the target's attributes, which may have changed (such as nlink, change time) so that they are refreshed on the next getattr(). Signed-off-by: Miklos Szeredi --- fs/fuse/dir.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 992f6c9410bb..8ada78aade58 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -712,8 +712,10 @@ static int fuse_rename(struct inode *olddir, struct dentry *oldent, fuse_invalidate_attr(newdir); /* newent will end up negative */ - if (newent->d_inode) + if (newent->d_inode) { + fuse_invalidate_attr(newent->d_inode); fuse_invalidate_entry_cache(newent); + } } else if (err == -EINTR) { /* If request was interrupted, DEITY only knows if the rename actually took place. If the invalidation From 798a8a15011e88cc63dbbb15728b42572c152093 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Wed, 4 Nov 2009 10:11:07 +0000 Subject: [PATCH 113/743] ALSA: hda - Add OLPC XO-1.5 PCI ID The XO-1.5 laptop now has a unique subvendor/subproduct ID, which can be used to automatically select the correct CXT5066 configuration. Signed-off-by: Daniel Drake Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 3fbbc8c01e70..6479e65858d3 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -2325,6 +2325,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = { CXT5066_LAPTOP), SND_PCI_QUIRK(0x1028, 0x02f5, "Dell", CXT5066_DELL_LAPTOP), + SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5), {} }; From 1b3a02eb452354fa9b36a7f33dc4c8307bbc40aa Mon Sep 17 00:00:00 2001 From: Tony Thompson Date: Wed, 4 Nov 2009 12:16:38 +0000 Subject: [PATCH 114/743] ARMv7: Check whether the SMP/nAMP mode was already enabled If running in non-secure mode, enabling this register will fault. Signed-off-by: Tony Thompson Acked-by: Srinidhi Kasagar Signed-off-by: Catalin Marinas --- arch/arm/mm/proc-v7.S | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index eeeed01ee44a..3a285218fd15 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -186,9 +186,10 @@ cpu_v7_name: */ __v7_setup: #ifdef CONFIG_SMP - mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode and - orr r0, r0, #(1 << 6) | (1 << 0) @ TLB ops broadcasting - mcr p15, 0, r0, c1, c0, 1 + mrc p15, 0, r0, c1, c0, 1 + tst r0, #(1 << 6) @ SMP/nAMP mode enabled? + orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and + mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting #endif adr r12, __v7_setup_stack @ the local stack stmia r12, {r0-r5, r7, r9, r11, lr} From 89240ba059ca468ae7a8346edf7f95082458c2fc Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Tue, 3 Nov 2009 10:22:40 +0100 Subject: [PATCH 115/743] x86, fs: Fix x86 procfs stack information for threads on 64-bit This patch fixes two issues in the procfs stack information on x86-64 linux. The 32 bit loader compat_do_execve did not store stack start. (this was figured out by Alexey Dobriyan). The stack information on a x64_64 kernel always shows 0 kbyte stack usage, because of a missing implementation of the KSTK_ESP macro which always returned -1. The new implementation now returns the right value. Signed-off-by: Stefani Seibold Cc: Americo Wang Cc: Alexey Dobriyan Cc: Al Viro Cc: Andrew Morton LKML-Reference: <1257240160.4889.24.camel@wall-e> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/processor.h | 2 +- arch/x86/kernel/process_64.c | 5 +++++ fs/compat.c | 2 ++ 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index c3429e8b2424..c9786480f0fe 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -1000,7 +1000,7 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk); #define thread_saved_pc(t) (*(unsigned long *)((t)->thread.sp - 8)) #define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.sp0 - 1) -#define KSTK_ESP(tsk) -1 /* sorry. doesn't work for syscall. */ +extern unsigned long KSTK_ESP(struct task_struct *task); #endif /* CONFIG_X86_64 */ extern void start_thread(struct pt_regs *regs, unsigned long new_ip, diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index ad535b683170..eb62cbcaa490 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -664,3 +664,8 @@ long sys_arch_prctl(int code, unsigned long addr) return do_arch_prctl(current, code, addr); } +unsigned long KSTK_ESP(struct task_struct *task) +{ + return (test_tsk_thread_flag(task, TIF_IA32)) ? + (task_pt_regs(task)->sp) : ((task)->thread.usersp); +} diff --git a/fs/compat.c b/fs/compat.c index d576b552e8e2..6c19040ffeef 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -1532,6 +1532,8 @@ int compat_do_execve(char * filename, if (retval < 0) goto out; + current->stack_start = current->mm->start_stack; + /* execve succeeded */ current->fs->in_exec = 0; current->in_execve = 0; From a3c4c58085b23d8e878a58dcdd0f8fcf8fad1ccd Mon Sep 17 00:00:00 2001 From: Li Hong Date: Mon, 19 Oct 2009 16:33:29 +0800 Subject: [PATCH 116/743] amd64_edac: fix a wrong goto clause in amd64_edac.c In amd64_edac_init(void) in amd64_edac.c, cache_k8_northbridges() is called before pci_register_driver. If it fails, should exit with err directly. Signed-off-by: Li Hong Acked-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index d4560d9d5a83..3ee539a3fbb4 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -3163,7 +3163,7 @@ static int __init amd64_edac_init(void) opstate_init(); if (cache_k8_northbridges() < 0) - goto err_exit; + return err; err = pci_register_driver(&amd64_pci_driver); if (err) @@ -3189,8 +3189,6 @@ static int __init amd64_edac_init(void) err_2nd_stage: debugf0("2nd stage failed\n"); - -err_exit: pci_unregister_driver(&amd64_pci_driver); return err; From 17adea01b9606e416ea5116a27d02d47fe7e6c8d Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 4 Nov 2009 14:04:06 +0100 Subject: [PATCH 117/743] amd64_edac: fix CECCs reporting Shift error type bits properly. Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 3ee539a3fbb4..a38831c82649 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -2254,7 +2254,7 @@ static inline void __amd64_decode_bus_error(struct mem_ctl_info *mci, { u32 ec = ERROR_CODE(info->nbsl); u32 xec = EXT_ERROR_CODE(info->nbsl); - int ecc_type = info->nbsh & (0x3 << 13); + int ecc_type = (info->nbsh >> 13) & 0x3; /* Bail early out if this was an 'observed' error */ if (PP(ec) == K8_NBSL_PP_OBS) From 3a19d56c71bd3a08412d609d219ac8eec0819166 Mon Sep 17 00:00:00 2001 From: Torgny Johansson Date: Wed, 4 Nov 2009 05:25:02 -0800 Subject: [PATCH 118/743] cdc_ether: additional Ericsson MBM PID's to the whitelist Signed-off-by: Torgny Johansson Signed-off-by: David S. Miller --- drivers/net/usb/Kconfig | 2 +- drivers/net/usb/cdc_ether.c | 42 ++++++++++++++++++++++++++++++++++++- 2 files changed, 42 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index c47237c2d638..32d93564a74d 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -174,7 +174,7 @@ config USB_NET_CDCETHER * Ericsson Mobile Broadband Module (all variants) * Motorola (DM100 and SB4100) * Broadcom Cable Modem (reference design) - * Toshiba (PCX1100U and F3507g) + * Toshiba (PCX1100U and F3507g/F3607gw) * ... This driver creates an interface named "ethX", where X depends on diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 4a6aff579403..21e1ba160008 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -544,20 +544,60 @@ static const struct usb_device_id products [] = { USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, }, { - /* Ericsson F3307 */ + /* Ericsson F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1905, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Ericsson F3607gw ver 3 */ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1906, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, +}, { + /* Ericsson F3307 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190a, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Ericsson F3307 ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1909, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Ericsson C3607w */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1049, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, }, { /* Toshiba F3507g */ USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, +}, { + /* Toshiba F3607gw */ + USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130c, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Toshiba F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x1311, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, }, { /* Dell F3507g */ USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8147, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, +}, { + /* Dell F3607gw */ + USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8183, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Dell F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8184, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, }, { }, // END }; From c8ee5538b091b8aca9ca738c6989c5ad6f9e67c0 Mon Sep 17 00:00:00 2001 From: Tonyliu Date: Wed, 4 Nov 2009 05:45:02 -0800 Subject: [PATCH 119/743] DaVinci EMAC: correct param for ISR emac_irq is declared as: static irqreturn_t emac_irq(int irq, void *dev_id) { struct net_device *ndev = (struct net_device *)dev_id; struct emac_priv *priv = netdev_priv(ndev); ... Clearly emac_irq() needs "struct net_device *" as "void *dev_id", so correct this. Signed-off-by: Tonyliu Signed-off-by: David S. Miller --- drivers/net/davinci_emac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index f72c56dec33c..3179521aee90 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -2221,7 +2221,7 @@ void emac_poll_controller(struct net_device *ndev) struct emac_priv *priv = netdev_priv(ndev); emac_int_disable(priv); - emac_irq(ndev->irq, priv); + emac_irq(ndev->irq, ndev); emac_int_enable(priv); } #endif From a9e38c3e01ad242fe2a625354cf065c34b01e3aa Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Fri, 23 Oct 2009 09:37:00 +0200 Subject: [PATCH 120/743] KVM: x86: Catch potential overrun in MCE setup We only allocate memory for 32 MCE banks (KVM_MAX_MCE_BANKS) but we allow user space to fill up to 255 on setup (mcg_cap & 0xff), corrupting kernel memory. Catch these overflows. Signed-off-by: Jan Kiszka Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/x86.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 9b9695322f56..8a93fa894ba6 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1692,7 +1692,7 @@ static int kvm_vcpu_ioctl_x86_setup_mce(struct kvm_vcpu *vcpu, unsigned bank_num = mcg_cap & 0xff, bank; r = -EINVAL; - if (!bank_num) + if (!bank_num || bank_num >= KVM_MAX_MCE_BANKS) goto out; if (mcg_cap & ~(KVM_MCE_CAP_SUPPORTED | 0xff | 0xff0000)) goto out; From abb3911965c1bd8eea305f64d4840a314259d96d Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Sun, 25 Oct 2009 17:42:02 +0200 Subject: [PATCH 121/743] KVM: get_tss_base_addr() should return a gpa_t If TSS we are switching to resides in high memory task switch will fail since address will be truncated. Windows2k3 does this sometimes when running with more then 4G Cc: stable@kernel.org Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 8a93fa894ba6..ae07d261527c 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -4051,7 +4051,7 @@ static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector, return kvm_write_guest_virt(dtable.base + index*8, seg_desc, sizeof(*seg_desc), vcpu); } -static u32 get_tss_base_addr(struct kvm_vcpu *vcpu, +static gpa_t get_tss_base_addr(struct kvm_vcpu *vcpu, struct desc_struct *seg_desc) { u32 base_addr = get_desc_base(seg_desc); From 02303d2028aef19889415364fc5f7bb374887157 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 4 Nov 2009 08:25:57 -0800 Subject: [PATCH 122/743] isdn: hisax: Fix lock imbalance. Add omittted unlocks to 2 functions. Signed-off-by: Jiri Slaby Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hisax/amd7930_fn.c | 1 + drivers/isdn/hisax/icc.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/isdn/hisax/amd7930_fn.c b/drivers/isdn/hisax/amd7930_fn.c index bf526a7a63af..d6fdf1f66754 100644 --- a/drivers/isdn/hisax/amd7930_fn.c +++ b/drivers/isdn/hisax/amd7930_fn.c @@ -594,6 +594,7 @@ Amd7930_l1hw(struct PStack *st, int pr, void *arg) if (cs->debug & L1_DEB_WARN) debugl1(cs, "Amd7930: l1hw: l2l1 tx_skb exist this shouldn't happen"); skb_queue_tail(&cs->sq, skb); + spin_unlock_irqrestore(&cs->lock, flags); break; } if (cs->debug & DEB_DLOG_HEX) diff --git a/drivers/isdn/hisax/icc.c b/drivers/isdn/hisax/icc.c index 9aba646ba221..c80cbb8a2ef9 100644 --- a/drivers/isdn/hisax/icc.c +++ b/drivers/isdn/hisax/icc.c @@ -468,6 +468,7 @@ ICC_l1hw(struct PStack *st, int pr, void *arg) if (cs->debug & L1_DEB_WARN) debugl1(cs, " l2l1 tx_skb exist this shouldn't happen"); skb_queue_tail(&cs->sq, skb); + spin_unlock_irqrestore(&cs->lock, flags); break; } if (cs->debug & DEB_DLOG_HEX) From 08cb3f60b2f866c906a5a779444b30ba8f9a93c8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 4 Nov 2009 08:27:09 -0800 Subject: [PATCH 123/743] misdn: Fix reversed 'if' in st_own_ctrl The current code probably returns -EINVAL a lot. Otherwise it would oops. Compile tested only. Found by smatch (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/mISDN/stack.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c index 3e1532a180ff..0d05ec43012c 100644 --- a/drivers/isdn/mISDN/stack.c +++ b/drivers/isdn/mISDN/stack.c @@ -364,7 +364,7 @@ add_layer2(struct mISDNchannel *ch, struct mISDNstack *st) static int st_own_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg) { - if (!ch->st || ch->st->layer1) + if (!ch->st || !ch->st->layer1) return -EINVAL; return ch->st->layer1->ctrl(ch->st->layer1, cmd, arg); } From 1ea70841f07666af69e481d4ffdd6edb56db3c92 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 4 Nov 2009 08:28:12 -0800 Subject: [PATCH 124/743] isdn: eicon: Use offsetof Use offsetof instead of explicit implementation. * fixes bug with omitted & like: len = (byte)(((T30_INFO *) 0)->station_id + 20) * avoids compiler warnings with wrong sizes (pointer-to-char cast): len = (byte)(&(((T30_INFO *) 0)->universal_6)); * cleans up the code Signed-off-by: Jiri Slaby Cc: Karsten Keil Acked-by: Armin Schindler Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hardware/eicon/message.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c index 27d5dd68f4fb..ae89fb89da64 100644 --- a/drivers/isdn/hardware/eicon/message.c +++ b/drivers/isdn/hardware/eicon/message.c @@ -2692,7 +2692,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a, if (!(fax_control_bits & T30_CONTROL_BIT_MORE_DOCUMENTS) || (fax_feature_bits & T30_FEATURE_BIT_MORE_DOCUMENTS)) { - len = (byte)(&(((T30_INFO *) 0)->universal_6)); + len = offsetof(T30_INFO, universal_6); fax_info_change = false; if (ncpi->length >= 4) { @@ -2754,7 +2754,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a, for (i = 0; i < w; i++) ((T30_INFO *)(plci->fax_connect_info_buffer))->station_id[i] = fax_parms[4].info[1+i]; ((T30_INFO *)(plci->fax_connect_info_buffer))->head_line_len = 0; - len = (byte)(((T30_INFO *) 0)->station_id + 20); + len = offsetof(T30_INFO, station_id) + 20; w = fax_parms[5].length; if (w > 20) w = 20; @@ -2788,7 +2788,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a, } else { - len = (byte)(&(((T30_INFO *) 0)->universal_6)); + len = offsetof(T30_INFO, universal_6); } fax_info_change = true; @@ -2892,7 +2892,7 @@ static byte connect_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a, && (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_ENABLE_NSF) && (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_NEGOTIATE_RESP)) { - len = ((byte)(((T30_INFO *) 0)->station_id + 20)); + len = offsetof(T30_INFO, station_id) + 20; if (plci->fax_connect_info_length < len) { ((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0; @@ -3802,7 +3802,7 @@ static byte manufacturer_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a, break; } ncpi = &m_parms[1]; - len = ((byte)(((T30_INFO *) 0)->station_id + 20)); + len = offsetof(T30_INFO, station_id) + 20; if (plci->fax_connect_info_length < len) { ((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0; @@ -6844,7 +6844,7 @@ static void nl_ind(PLCI *plci) if ((plci->requested_options_conn | plci->requested_options | a->requested_options_table[plci->appl->Id-1]) & ((1L << PRIVATE_FAX_SUB_SEP_PWD) | (1L << PRIVATE_FAX_NONSTANDARD))) { - i = ((word)(((T30_INFO *) 0)->station_id + 20)) + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len; + i = offsetof(T30_INFO, station_id) + 20 + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len; while (i < plci->NL.RBuffer->length) plci->ncpi_buffer[++len] = plci->NL.RBuffer->P[i++]; } @@ -7236,7 +7236,7 @@ static void nl_ind(PLCI *plci) { plci->RData[1].P = plci->RData[0].P; plci->RData[1].PLength = plci->RData[0].PLength; - plci->RData[0].P = v120_header_buffer + (-((int) v120_header_buffer) & 3); + plci->RData[0].P = v120_header_buffer + (-((unsigned long)v120_header_buffer) & 3); if ((plci->NL.RBuffer->P[0] & V120_HEADER_EXTEND_BIT) || (plci->NL.RLength == 1)) plci->RData[0].PLength = 1; else @@ -8473,7 +8473,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp) fax_control_bits |= T30_CONTROL_BIT_ACCEPT_SEL_POLLING; } len = nlc[0]; - pos = ((byte)(((T30_INFO *) 0)->station_id + 20)); + pos = offsetof(T30_INFO, station_id) + 20; if (pos < plci->fax_connect_info_length) { for (i = 1 + plci->fax_connect_info_buffer[pos]; i != 0; i--) @@ -8525,7 +8525,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp) } PUT_WORD(&(((T30_INFO *)&nlc[1])->control_bits_low), fax_control_bits); - len = ((byte)(((T30_INFO *) 0)->station_id + 20)); + len = offsetof(T30_INFO, station_id) + 20; for (i = 0; i < len; i++) plci->fax_connect_info_buffer[i] = nlc[1+i]; ((T30_INFO *) plci->fax_connect_info_buffer)->head_line_len = 0; From b9db21f8b964e158f95bb581c887159b6cb98ffa Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 4 Nov 2009 08:30:08 -0800 Subject: [PATCH 125/743] isdn: eicon: Return on error When diva_strace_read_uint returns an error, return even from process_idi_event, because l2_state is uninitialized. Signed-off-by: Jiri Slaby Cc: Karsten Keil Acked-by: Armin Schindler Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hardware/eicon/maintidi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/isdn/hardware/eicon/maintidi.c b/drivers/isdn/hardware/eicon/maintidi.c index 23960cb6eaab..41c26e756452 100644 --- a/drivers/isdn/hardware/eicon/maintidi.c +++ b/drivers/isdn/hardware/eicon/maintidi.c @@ -959,8 +959,9 @@ static int process_idi_event (diva_strace_context_t* pLib, } if (!strncmp("State\\Layer2 No1", path, pVar->path_length)) { char* tmp = &pLib->lines[0].pInterface->Layer2[0]; - dword l2_state; - diva_strace_read_uint (pVar, &l2_state); + dword l2_state; + if (diva_strace_read_uint(pVar, &l2_state)) + return -1; switch (l2_state) { case 0: From a947c8f0313c0cf3691b8d8d2b9aaddf372afdcc Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 4 Nov 2009 08:31:19 -0800 Subject: [PATCH 126/743] isdn: hisax: Fix test in waitforxfw The negation makes it a bool before the comparison and hence it will never be 0x40. Signed-off-by: Roel Kluin Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hisax/diva.c | 2 +- drivers/isdn/hisax/hscx_irq.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/isdn/hisax/diva.c b/drivers/isdn/hisax/diva.c index 018bd293e580..0b0c2e5d806b 100644 --- a/drivers/isdn/hisax/diva.c +++ b/drivers/isdn/hisax/diva.c @@ -382,7 +382,7 @@ MemwaitforXFW(struct IsdnCardState *cs, int hscx) { int to = 50; - while ((!(MemReadHSCX(cs, hscx, HSCX_STAR) & 0x44) == 0x40) && to) { + while (((MemReadHSCX(cs, hscx, HSCX_STAR) & 0x44) != 0x40) && to) { udelay(1); to--; } diff --git a/drivers/isdn/hisax/hscx_irq.c b/drivers/isdn/hisax/hscx_irq.c index 7b1ad5e4ecda..2387d76c721a 100644 --- a/drivers/isdn/hisax/hscx_irq.c +++ b/drivers/isdn/hisax/hscx_irq.c @@ -32,7 +32,7 @@ waitforXFW(struct IsdnCardState *cs, int hscx) { int to = 50; - while ((!(READHSCX(cs, hscx, HSCX_STAR) & 0x44) == 0x40) && to) { + while (((READHSCX(cs, hscx, HSCX_STAR) & 0x44) != 0x40) && to) { udelay(1); to--; } From 286e633ef0ff5bb63c07b4516665da8004966fec Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 4 Nov 2009 08:31:59 -0800 Subject: [PATCH 127/743] isdn: hfc_usb: Fix read buffer overflow Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hisax/hfc_usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index 9de54202c90c..a420b64472e3 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -817,8 +817,8 @@ collect_rx_frame(usb_fifo * fifo, __u8 * data, int len, int finish) } /* we have a complete hdlc packet */ if (finish) { - if ((!fifo->skbuff->data[fifo->skbuff->len - 1]) - && (fifo->skbuff->len > 3)) { + if (fifo->skbuff->len > 3 && + !fifo->skbuff->data[fifo->skbuff->len - 1]) { if (fifon == HFCUSB_D_RX) { DBG(HFCUSB_DBG_DCHANNEL, From dffc14365bb07812567ee7f3f8699277ef19aaa8 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 4 Nov 2009 09:38:58 -0800 Subject: [PATCH 128/743] MAINTAINERS: Add git net-next-2.6 Add a reference to the the git tree where most of the forward going network development occurs. Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index cdbbaf59a43b..c856aee0f1e2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3632,6 +3632,7 @@ L: netdev@vger.kernel.org W: http://www.linuxfoundation.org/en/Net W: http://patchwork.ozlabs.org/project/netdev/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git S: Maintained F: net/ F: include/net/ From 4c3da2209b1261af9a948b7509a38904c8eee554 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 4 Nov 2009 02:50:06 -0800 Subject: [PATCH 129/743] sysfs: Don't leak secdata when a sysfs_dirent is freed. While refreshing my sysfs patches I noticed a leak in the secdata implementation. We don't free the secdata when we free the sysfs dirent. This is a bug in 2.6.32-rc5 that we really should close. Signed-off-by: Eric W. Biederman Acked-by: Serge Hallyn Signed-off-by: James Morris --- fs/sysfs/dir.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c index 5fad489ce5bc..e0201837d244 100644 --- a/fs/sysfs/dir.c +++ b/fs/sysfs/dir.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "sysfs.h" DEFINE_MUTEX(sysfs_mutex); @@ -285,6 +286,9 @@ void release_sysfs_dirent(struct sysfs_dirent * sd) sysfs_put(sd->s_symlink.target_sd); if (sysfs_type(sd) & SYSFS_COPY_NAME) kfree(sd->s_name); + if (sd->s_iattr && sd->s_iattr->ia_secdata) + security_release_secctx(sd->s_iattr->ia_secdata, + sd->s_iattr->ia_secdata_len); kfree(sd->s_iattr); sysfs_free_ino(sd->s_ino); kmem_cache_free(sysfs_dir_cachep, sd); From 37b12dd2b07b4d7dc222a5f7f88b25cec532b2aa Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 4 Nov 2009 00:00:25 -0600 Subject: [PATCH 130/743] rtl8187: Fix kernel oops when device is removed when LEDS enabled As reported by Rick Farina (sidhayn@gmail.com), removing the RTL8187 USB stick, or unloading the driver rtl8187 using rmmod will cause a kernel oops. There are at least two forms of the failure, (1) BUG: Scheduling while atomic, and (2) a fatal kernel page fault. This problem is reported in Bugzilla #14539. This problem does not occur for kernel 2.6.31, but does for 2.6.32-rc2, thus it is technically a regression; however, bisection did not locate any faulty patch. The fix was found by comparing the faulty code in rtl8187 with p54usb. My interpretation is that the handling of work queues in mac80211 changed enough to the LEDs to be unregistered before tasks on the work queues are cancelled. Previously, these actions could be done in either order. (Herton Ronaldo Krzesinski reports that the code is the same in 2.6.31, so this may be a candidate for 2.6.31.x. -- JWL) Signed-off-by: Larry Finger Reported-by: Rick Farina Tested-by: Rick Farina Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187_leds.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c index a1c670fc1552..cf8a4a40fdf6 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_leds.c +++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c @@ -210,10 +210,10 @@ void rtl8187_leds_exit(struct ieee80211_hw *dev) /* turn the LED off before exiting */ ieee80211_queue_delayed_work(dev, &priv->led_off, 0); - cancel_delayed_work_sync(&priv->led_off); - cancel_delayed_work_sync(&priv->led_on); rtl8187_unregister_led(&priv->led_rx); rtl8187_unregister_led(&priv->led_tx); + cancel_delayed_work_sync(&priv->led_off); + cancel_delayed_work_sync(&priv->led_on); } #endif /* def CONFIG_RTL8187_LED */ From f1167fb318f0ff0bcb9cbb57bb6d16ad450f0cfb Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 4 Nov 2009 13:39:52 +0000 Subject: [PATCH 131/743] powerpc/mm: Remove debug context clamping from nohash code I inadvertently left that debug code enabled, causing the number of contexts to be clamped to 31 which is going to slow things down on 4xx and just plain breaks 8xx Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/mmu_context_nohash.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index c2f93dc470e6..be4f34c30a0b 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -25,8 +25,8 @@ * also clear mm->cpu_vm_mask bits when processes are migrated */ -#define DEBUG_MAP_CONSISTENCY -#define DEBUG_CLAMP_LAST_CONTEXT 31 +//#define DEBUG_MAP_CONSISTENCY +//#define DEBUG_CLAMP_LAST_CONTEXT 31 //#define DEBUG_HARDER /* We don't use DEBUG because it tends to be compiled in always nowadays From 978d7eb31d44de34a7f71e04ed4158f3f854688d Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sun, 1 Nov 2009 19:11:03 +0000 Subject: [PATCH 132/743] powerpc: Avoid giving out RTC dates below EPOCH Doing so causes xtime to be negative which crashes the timekeeping code in funny ways when doing suspend/resume Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/time.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 92dc844299b6..a136a11c490d 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -777,7 +777,7 @@ int update_persistent_clock(struct timespec now) return ppc_md.set_rtc_time(&tm); } -void read_persistent_clock(struct timespec *ts) +static void __read_persistent_clock(struct timespec *ts) { struct rtc_time tm; static int first = 1; @@ -800,10 +800,23 @@ void read_persistent_clock(struct timespec *ts) return; } ppc_md.get_rtc_time(&tm); + ts->tv_sec = mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec); } +void read_persistent_clock(struct timespec *ts) +{ + __read_persistent_clock(ts); + + /* Sanitize it in case real time clock is set below EPOCH */ + if (ts->tv_sec < 0) { + ts->tv_sec = 0; + ts->tv_nsec = 0; + } + +} + /* clocksource code */ static cycle_t rtc_read(struct clocksource *cs) { From 8435b027b87a78145992c37b0b8ed0f1b7761bf0 Mon Sep 17 00:00:00 2001 From: Andre Detsch Date: Wed, 4 Nov 2009 13:03:19 -0200 Subject: [PATCH 133/743] powerpc/pci: Fix regression in powerpc MSI-X Patch f598282f5145036312d90875d0ed5c14b49fd8a7 exposed a problem in powerpc MSI-X functionality, making network interfaces such as ixgbe and cxgb3 stop to work when MSI-X is enabled. RX interrupts were not being generated. The problem was caused because MSI irq was not being effectively unmasked after device initialization. Signed-off-by: Andre Detsch Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/msi.c | 2 -- arch/powerpc/platforms/pseries/xics.c | 9 +++++++++ 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index bf2e1ac41308..1164c3430f2c 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -432,8 +432,6 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) /* Read config space back so we can restore after reset */ read_msi_msg(virq, &msg); entry->msg = msg; - - unmask_msi_irq(virq); } return 0; diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 419f8a637ffe..b9bf0eedccf2 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -219,6 +220,14 @@ static void xics_unmask_irq(unsigned int virq) static unsigned int xics_startup(unsigned int virq) { + /* + * The generic MSI code returns with the interrupt disabled on the + * card, using the MSI mask bits. Firmware doesn't appear to unmask + * at that level, so we do it here by hand. + */ + if (irq_to_desc(virq)->msi_desc) + unmask_msi_irq(virq); + /* unmask it */ xics_unmask_irq(virq); return 0; From 38634e6769920929385f1ffc8820dc3e893cc630 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 5 Nov 2009 17:10:34 +1100 Subject: [PATCH 134/743] powerpc/kvm: Remove problematic BUILD_BUG_ON statement Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kvm/timing.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/kvm/timing.h b/arch/powerpc/kvm/timing.h index bb13b1f3cd5a..806ef67868bd 100644 --- a/arch/powerpc/kvm/timing.h +++ b/arch/powerpc/kvm/timing.h @@ -48,7 +48,11 @@ static inline void kvmppc_set_exit_type(struct kvm_vcpu *vcpu, int type) {} static inline void kvmppc_account_exit_stat(struct kvm_vcpu *vcpu, int type) { /* type has to be known at build time for optimization */ + + /* The BUILD_BUG_ON below breaks in funny ways, commented out + * for now ... -BenH BUILD_BUG_ON(__builtin_constant_p(type)); + */ switch (type) { case EXT_INTR_EXITS: vcpu->stat.ext_intr_exits++; From 7e6c3989af5baee999ef9a4424e85938cba8d34a Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Wed, 4 Nov 2009 21:03:46 -0500 Subject: [PATCH 135/743] ALSA: intel8x0: Mute External Amplifier by default for another Sony model BugLink: https://bugs.launchpad.net/bugs/474972 This Sony model needs External Amplifier muted for audible playback, so make sure we set the inv_eapd quirk. Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai --- sound/pci/intel8x0.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 754867ed4785..aac20fb4aad2 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -1948,6 +1948,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { .name = "HP xw4200", /* AD1981B*/ .type = AC97_TUNE_HP_ONLY }, + { + .subvendor = 0x104d, + .subdevice = 0x8144, + .name = "Sony", + .type = AC97_TUNE_INV_EAPD + }, { .subvendor = 0x104d, .subdevice = 0x8197, From f702cf463e1308fbb0c1faa9f3d8e3fa9cb5630f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 4 Nov 2009 16:04:52 -0800 Subject: [PATCH 136/743] sound: Use KERN_WARNING instead of KERN_WARN, which does not exist Reported-by: Andrew Lyon Signed-off-by: Randy Dunlap Signed-off-by: Takashi Iwai --- sound/oss/sb_common.c | 4 ++-- sound/oss/sb_ess.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/oss/sb_common.c b/sound/oss/sb_common.c index 77d0e5efda76..ce4db49291f7 100644 --- a/sound/oss/sb_common.c +++ b/sound/oss/sb_common.c @@ -157,7 +157,7 @@ static void sb_intr (sb_devc *devc) break; default: - /* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */ + /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */ ; } } @@ -177,7 +177,7 @@ static void sb_intr (sb_devc *devc) break; default: - /* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */ + /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */ ; } } diff --git a/sound/oss/sb_ess.c b/sound/oss/sb_ess.c index 180e95c87e3e..51a3d381a59e 100644 --- a/sound/oss/sb_ess.c +++ b/sound/oss/sb_ess.c @@ -782,7 +782,7 @@ printk(KERN_INFO "FKS: ess_handle_channel %s irq_mode=%d\n", channel, irq_mode); break; default:; - /* printk(KERN_WARN "ESS: Unexpected interrupt\n"); */ + /* printk(KERN_WARNING "ESS: Unexpected interrupt\n"); */ } } From 22402529df88ec39a59b08a46bced73dd5722b64 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 5 Nov 2009 01:32:44 -0800 Subject: [PATCH 137/743] virtio_net: rename driver struct to please modpost MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 3d1285b (move virtnet_remove to .devexit.text) introduced the first reference to __devexit in struct virtio_driver virtio_net which upset modpost ("Section mismatch in reference from the variable virtio_net to the function .devexit.text:virtnet_remove()"). Fix this by renaming virtio_net to virtio_net_driver. Signed-off-by: Uwe Kleine-König Reported-by: Michael S. Tsirkin Blame-taken-by: Rusty Russell Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index d9ebac8a2d99..bb8b52d0d1ce 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -999,7 +999,7 @@ static unsigned int features[] = { VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN, }; -static struct virtio_driver virtio_net = { +static struct virtio_driver virtio_net_driver = { .feature_table = features, .feature_table_size = ARRAY_SIZE(features), .driver.name = KBUILD_MODNAME, @@ -1012,12 +1012,12 @@ static struct virtio_driver virtio_net = { static int __init init(void) { - return register_virtio_driver(&virtio_net); + return register_virtio_driver(&virtio_net_driver); } static void __exit fini(void) { - unregister_virtio_driver(&virtio_net); + unregister_virtio_driver(&virtio_net_driver); } module_init(init); module_exit(fini); From 9b229fa0951fb47cbc178be4bd8e9ef185b38802 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 4 Nov 2009 12:16:38 +0000 Subject: [PATCH 138/743] Check whether the SCU was already initialised If Linux is running in non-secure mode, this register may have been already initialised and writing to the control register not allowed. Signed-off-by: Catalin Marinas --- arch/arm/kernel/smp_scu.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index d3831f616ee9..9ab4149bd983 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -37,6 +37,10 @@ void __init scu_enable(void __iomem *scu_base) u32 scu_ctrl; scu_ctrl = __raw_readl(scu_base + SCU_CTRL); + /* already enabled? */ + if (scu_ctrl & 1) + return; + scu_ctrl |= 1; __raw_writel(scu_ctrl, scu_base + SCU_CTRL); From 5b39d1548dc2751f8de89e6f429b6560a137eebb Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 4 Nov 2009 12:19:04 +0000 Subject: [PATCH 139/743] RealView: Add default memory configuration This patch adds a realview_fixup() function called during booting to set up the memory banks. This way there is no need to pass a "mem=" argument on the kernel command line. Signed-off-by: Catalin Marinas --- arch/arm/mach-realview/core.c | 21 +++++++++++++++++++++ arch/arm/mach-realview/core.h | 6 ++++++ arch/arm/mach-realview/realview_eb.c | 1 + arch/arm/mach-realview/realview_pb1176.c | 13 +++++++++++++ arch/arm/mach-realview/realview_pb11mp.c | 1 + arch/arm/mach-realview/realview_pba8.c | 1 + arch/arm/mach-realview/realview_pbx.c | 1 + 7 files changed, 44 insertions(+) diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index a2083b60e3fb..c21b0fd39652 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -788,3 +788,24 @@ void __init realview_timer_init(unsigned int timer_irq) realview_clocksource_init(); realview_clockevents_init(timer_irq); } + +/* + * Setup the memory banks. + */ +void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from, + struct meminfo *meminfo) +{ + /* + * Most RealView platforms have 512MB contiguous RAM at 0x70000000. + * Half of this is mirrored at 0. + */ +#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET + meminfo->bank[0].start = 0x70000000; + meminfo->bank[0].size = SZ_512M; + meminfo->nr_banks = 1; +#else + meminfo->bank[0].start = 0; + meminfo->bank[0].size = SZ_256M; + meminfo->nr_banks = 1; +#endif +} diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 699671fa6e0b..781bca68a9fa 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -25,6 +25,7 @@ #include #include +#include #include #define AMBA_DEVICE(name,busid,base,plat) \ @@ -44,6 +45,8 @@ static struct amba_device name##_device = { \ /* .dma = base##_DMA,*/ \ } +struct machine_desc; + extern struct platform_device realview_flash_device; extern struct platform_device realview_cf_device; extern struct platform_device realview_i2c_device; @@ -61,5 +64,8 @@ extern void realview_timer_init(unsigned int timer_irq); extern int realview_flash_register(struct resource *res, u32 num); extern int realview_eth_register(const char *name, struct resource *res); extern int realview_usb_register(struct resource *res); +extern void realview_fixup(struct machine_desc *mdesc, struct tag *tags, + char **from, struct meminfo *meminfo); extern void (*realview_reset)(char); + #endif diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 1d65e64ae571..917f8ca3abff 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -415,6 +415,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB") .phys_io = REALVIEW_EB_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_fixup, .map_io = realview_eb_map_io, .init_irq = gic_init_irq, .timer = &realview_eb_timer, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index a6ba147692c1..7fb726d5f8b9 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -300,6 +300,18 @@ static void realview_pb1176_reset(char mode) __raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl); } +static void realview_pb1176_fixup(struct machine_desc *mdesc, + struct tag *tags, char **from, + struct meminfo *meminfo) +{ + /* + * RealView PB1176 only has 128MB of RAM mapped at 0. + */ + meminfo->bank[0].start = 0; + meminfo->bank[0].size = SZ_128M; + meminfo->nr_banks = 1; +} + static void __init realview_pb1176_init(void) { int i; @@ -331,6 +343,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") .phys_io = REALVIEW_PB1176_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_pb1176_fixup, .map_io = realview_pb1176_map_io, .init_irq = gic_init_irq, .timer = &realview_pb1176_timer, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 070d284ce96e..9bbbfc05f225 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -347,6 +347,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") .phys_io = REALVIEW_PB11MP_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_fixup, .map_io = realview_pb11mp_map_io, .init_irq = gic_init_irq, .timer = &realview_pb11mp_timer, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 941beb2b9709..fe861e96c566 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -298,6 +298,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") .phys_io = REALVIEW_PBA8_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_fixup, .map_io = realview_pba8_map_io, .init_irq = gic_init_irq, .timer = &realview_pba8_timer, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 7e4bc6cdca52..5d09d8b4a1cb 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -345,6 +345,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") .phys_io = REALVIEW_PBX_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_fixup, .map_io = realview_pbx_map_io, .init_irq = gic_init_irq, .timer = &realview_pbx_timer, From 157aed7473d300587e89cc87e13f194e3fa6fa36 Mon Sep 17 00:00:00 2001 From: Colin Tuckley Date: Wed, 4 Nov 2009 12:19:05 +0000 Subject: [PATCH 140/743] RealView: Remove duplicated #define REALVIEW_SYS_FLAGS* statements The platsmp.c file defines the REALVIEW_SYS_FLAGS* macros which are already present in platform.h. Just use the latter. Signed-off-by: Colin Tuckley Signed-off-by: Catalin Marinas --- arch/arm/mach-realview/platsmp.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index a88458b4799d..009265818d55 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -146,11 +146,8 @@ static void __init poke_milo(void) * register. The BootMonitor waits for this register to become * non-zero. */ -#define REALVIEW_SYS_FLAGSS_OFFSET 0x30 -#define REALVIEW_SYS_FLAGSC_OFFSET 0x34 __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)), - __io_address(REALVIEW_SYS_BASE) + - REALVIEW_SYS_FLAGSS_OFFSET); + __io_address(REALVIEW_SYS_FLAGSSET)); mb(); } From c97c5aa83c41a532bc67da356d77da929bc41b9c Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 4 Nov 2009 12:19:05 +0000 Subject: [PATCH 141/743] RealView: Add sparsemem support for the RealView PBX platform The RealView PBX board has two 512MB blocks of memory - one at 0x70000000 (with 256MB mirror at 0) and another at 0x20000000. Only the block at 0x70000000 (or the mirror at 0) may be used for DMA (e.g. framebuffer). This patch adds the sparsemem definitions to allow the use of all the memory split as follows: 256MB @ 0x00000000 (ZONE_DMA) 512MB @ 0x20000000 (ZONE_NORMAL) 256MB @ 0x80000000 (ZONE_NORMAL) Signed-off-by: Catalin Marinas --- arch/arm/mach-realview/Kconfig | 5 +- arch/arm/mach-realview/core.c | 21 ++++++++- arch/arm/mach-realview/include/mach/memory.h | 49 ++++++++++++++++++++ arch/arm/mach-realview/realview_pbx.c | 22 ++++++++- 4 files changed, 94 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index dfc9b0bc6eb2..c48e1f2c3349 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -70,6 +70,8 @@ config MACH_REALVIEW_PBX bool "Support RealView/PBX platform" select ARM_GIC select HAVE_PATA_PLATFORM + select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !HIGH_PHYS_OFFSET + select ZONE_DMA if SPARSEMEM help Include support for the ARM(R) RealView PBX platform. @@ -82,6 +84,7 @@ config REALVIEW_HIGH_PHYS_OFFSET 0x70000000, 256MB of which being mirrored at 0x00000000. If the board supports 512MB of RAM, this option allows the memory to be accessed contiguously at the high physical - offset. + offset. On the PBX board, disabling this option allows 1GB of + RAM to be used with SPARSEMEM. endmenu diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index c21b0fd39652..9f293438e020 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -59,6 +59,25 @@ /* used by entry-macro.S and platsmp.c */ void __iomem *gic_cpu_base_addr; +#ifdef CONFIG_ZONE_DMA +/* + * Adjust the zones if there are restrictions for DMA access. + */ +void __init realview_adjust_zones(int node, unsigned long *size, + unsigned long *hole) +{ + unsigned long dma_size = SZ_256M >> PAGE_SHIFT; + + if (!machine_is_realview_pbx() || node || (size[0] <= dma_size)) + return; + + size[ZONE_NORMAL] = size[0] - dma_size; + size[ZONE_DMA] = dma_size; + hole[ZONE_NORMAL] = hole[0]; + hole[ZONE_DMA] = 0; +} +#endif + /* * This is the RealView sched_clock implementation. This has * a resolution of 41.7ns, and a maximum value of about 179s. @@ -543,7 +562,7 @@ static int realview_clcd_setup(struct clcd_fb *fb) fb->panel = realview_clcd_panel(); fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL); + &dma, GFP_KERNEL | GFP_DMA); if (!fb->fb.screen_base) { printk(KERN_ERR "CLCD: unable to map framebuffer\n"); return -ENOMEM; diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h index 293c30025e7e..2417bbcf97fd 100644 --- a/arch/arm/mach-realview/include/mach/memory.h +++ b/arch/arm/mach-realview/include/mach/memory.h @@ -29,4 +29,53 @@ #define PHYS_OFFSET UL(0x00000000) #endif +#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA) +extern void realview_adjust_zones(int node, unsigned long *size, + unsigned long *hole); +#define arch_adjust_zones(node, size, hole) \ + realview_adjust_zones(node, size, hole) + +#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_256M - 1) +#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_256M) +#endif + +#ifdef CONFIG_SPARSEMEM + +/* + * Sparsemem definitions for RealView PBX. + * + * The RealView PBX board has another block of 512MB of RAM at 0x20000000, + * however only the block at 0x70000000 (or the 256MB mirror at 0x00000000) + * may be used for DMA. + * + * The macros below define a section size of 256MB and a non-linear virtual to + * physical mapping: + * + * 256MB @ 0x00000000 -> PAGE_OFFSET + * 512MB @ 0x20000000 -> PAGE_OFFSET + 0x10000000 + * 256MB @ 0x80000000 -> PAGE_OFFSET + 0x30000000 + */ +#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET +#error "SPARSEMEM not available with REALVIEW_HIGH_PHYS_OFFSET" +#endif + +#define MAX_PHYSMEM_BITS 32 +#define SECTION_SIZE_BITS 28 + +/* bank page offsets */ +#define PAGE_OFFSET1 (PAGE_OFFSET + 0x10000000) +#define PAGE_OFFSET2 (PAGE_OFFSET + 0x30000000) + +#define __phys_to_virt(phys) \ + ((phys) >= 0x80000000 ? (phys) - 0x80000000 + PAGE_OFFSET2 : \ + (phys) >= 0x20000000 ? (phys) - 0x20000000 + PAGE_OFFSET1 : \ + (phys) + PAGE_OFFSET) + +#define __virt_to_phys(virt) \ + ((virt) >= PAGE_OFFSET2 ? (virt) - PAGE_OFFSET2 + 0x80000000 : \ + (virt) >= PAGE_OFFSET1 ? (virt) - PAGE_OFFSET1 + 0x20000000 : \ + (virt) - PAGE_OFFSET) + +#endif /* CONFIG_SPARSEMEM */ + #endif diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 5d09d8b4a1cb..ec39488e2b42 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -304,6 +304,26 @@ static struct sys_timer realview_pbx_timer = { .init = realview_pbx_timer_init, }; +static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags, + char **from, struct meminfo *meminfo) +{ +#ifdef CONFIG_SPARSEMEM + /* + * Memory configuration with SPARSEMEM enabled on RealView PBX (see + * asm/mach/memory.h for more information). + */ + meminfo->bank[0].start = 0; + meminfo->bank[0].size = SZ_256M; + meminfo->bank[1].start = 0x20000000; + meminfo->bank[1].size = SZ_512M; + meminfo->bank[2].start = 0x80000000; + meminfo->bank[2].size = SZ_256M; + meminfo->nr_banks = 3; +#else + realview_fixup(mdesc, tags, from, meminfo); +#endif +} + static void __init realview_pbx_init(void) { int i; @@ -345,7 +365,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") .phys_io = REALVIEW_PBX_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, - .fixup = realview_fixup, + .fixup = realview_pbx_fixup, .map_io = realview_pbx_map_io, .init_irq = gic_init_irq, .timer = &realview_pbx_timer, From cb5485a0b99b232c5c7c4c21e2346f8ab7ef555d Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 21 Sep 2009 10:30:08 -0400 Subject: [PATCH 142/743] powerpc/85xx: sbc8548 - fixup of PCI-e related DTS fields The PCI-e addressing was originally patterned of the MPC8548CDS which has PCI1, PCI2, and PCI-e. Since this board only has PCI1 and PCI-e, it makes more sense to be similar to the MPC8568MDS board. This does that by cutting the PCI/PCI-e I/O sizes from 16MB to 8MB and pulling the PCI-e I/O range back to 0xe280_0000 (the hole where PCI2 I/O would have been). This also fixes a typo where an extra zero made an 8MB range a 128MB range, removes the hole left by PCI2 from the aliases, and sets the clocks to match the oscillators that are actually on the board. With accompanying u-boot updates, PCI-e has been validated with both a sky2 card (1148:9e00) and an e1000 card (8086:108b). Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/sbc8548.dts | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 9eefe00ed253..94a332251710 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -26,8 +26,7 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; - /* pci1 doesn't have a corresponding physical connector */ - pci2 = &pci2; + pci1 = &pci1; }; cpus { @@ -381,7 +380,7 @@ bus-range = <0 0>; ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>; - clock-frequency = <66666666>; + clock-frequency = <66000000>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -390,7 +389,7 @@ device_type = "pci"; }; - pci2: pcie@e000a000 { + pci1: pcie@e000a000 { interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < @@ -403,9 +402,9 @@ interrupt-parent = <&mpic>; interrupts = <0x1a 0x2>; bus-range = <0x0 0xff>; - ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x08000000>; - clock-frequency = <33333333>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>; + clock-frequency = <33000000>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -419,11 +418,11 @@ device_type = "pci"; ranges = <0x02000000 0x0 0xa0000000 0x02000000 0x0 0xa0000000 - 0x0 0x20000000 + 0x0 0x10000000 0x01000000 0x0 0x00000000 0x01000000 0x0 0x00000000 - 0x0 0x08000000>; + 0x0 0x00800000>; }; }; }; From 58459a4e19e107d793a58a46780def2cea12a391 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 9 Sep 2009 16:49:57 +0200 Subject: [PATCH 143/743] powerpc/82xx: kmalloc failure ignored in ep8248e_mdio_probe() Prevent NULL dereference if kmalloc() fails. Also clean up if of_mdiobus_register() returns an error. Signed-off-by: Roel Kluin Acked-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/platforms/82xx/ep8248e.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c index 51fcae41f08a..f9aee182e6f7 100644 --- a/arch/powerpc/platforms/82xx/ep8248e.c +++ b/arch/powerpc/platforms/82xx/ep8248e.c @@ -132,12 +132,25 @@ static int __devinit ep8248e_mdio_probe(struct of_device *ofdev, return -ENOMEM; bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + if (bus->irq == NULL) { + ret = -ENOMEM; + goto err_free_bus; + } bus->name = "ep8248e-mdio-bitbang"; bus->parent = &ofdev->dev; snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start); - return of_mdiobus_register(bus, ofdev->node); + ret = of_mdiobus_register(bus, ofdev->node); + if (ret) + goto err_free_irq; + + return 0; +err_free_irq: + kfree(bus->irq); +err_free_bus: + free_mdio_bitbang(bus); + return ret; } static int ep8248e_mdio_remove(struct of_device *ofdev) From a070e66ae89978ffc16378b2d37bedf3674a9112 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 16 Oct 2009 20:50:13 +0400 Subject: [PATCH 144/743] powerpc/85xx: Fix USB GPIOs for MPC8569E-MDS boards This patch fixes USB GPIOs numbers for MPC8569E-MDS boards, plus according to the latest HW Getting Started Guide (rev 3.3, pilot boards), USB "POWER" GPIO polarity has changed, it is no longer inverted. This patch makes USB Host somewhat work on pilot boards, though there are still some problems with determining devices speed and long bulk transfers. Reported-by: Liu Yu Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8569mds.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index 06332d61830a..1e3ec8f059bf 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -487,8 +487,8 @@ &qe_pio_f 5 0 /* USBTN */ &qe_pio_f 6 0 /* USBRP */ &qe_pio_f 8 0 /* USBRN */ - &bcsr17 6 0 /* SPEED */ - &bcsr17 5 1>; /* POWER */ + &bcsr17 1 0 /* SPEED */ + &bcsr17 2 0>; /* POWER */ }; enet0: ucc@2000 { From 850f785a1f8c8448db4d70983595b2b088cf60b7 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 16 Oct 2009 20:47:22 +0400 Subject: [PATCH 145/743] powerpc/83xx: Fix u-boot partion size for MPC8377E-WLAN boards u-boot partition size should be 0x80000 (512 KB), not 0x8000 (32 KB). Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8377_wlan.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts index 9a603695723b..9ea783056969 100644 --- a/arch/powerpc/boot/dts/mpc8377_wlan.dts +++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts @@ -67,7 +67,7 @@ device-width = <1>; partition@0 { - reg = <0 0x8000>; + reg = <0 0x80000>; label = "u-boot"; read-only; }; From 114785a619e3f28133a555692b3d0b417ab91e66 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Mon, 12 Oct 2009 11:35:27 -0500 Subject: [PATCH 146/743] powerpc/8xxx: enable IPsec ESP by default on mpc83xx/mpc85xx Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc83xx_defconfig | 15 ++++++++------- arch/powerpc/configs/mpc85xx_defconfig | 16 ++++++++-------- arch/powerpc/configs/mpc85xx_smp_defconfig | 16 ++++++++-------- 3 files changed, 24 insertions(+), 23 deletions(-) diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 4a96cb6925b4..d6d28f2a23c1 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -343,7 +343,8 @@ CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -358,7 +359,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set +CONFIG_INET_ESP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set @@ -1591,7 +1592,7 @@ CONFIG_CRYPTO_PCBC=m # # Hash modes # -# CONFIG_CRYPTO_HMAC is not set +CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # @@ -1605,16 +1606,16 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index ee6acc6557f8..70851ee74340 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -345,7 +345,7 @@ CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=m +CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -369,12 +369,12 @@ CONFIG_IP_PIMSM_V2=y CONFIG_ARPD=y # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set +CONFIG_INET_ESP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y @@ -1769,16 +1769,16 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index db082ce5a1c5..ab45fd99afc3 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -348,7 +348,7 @@ CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=m +CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -372,12 +372,12 @@ CONFIG_IP_PIMSM_V2=y CONFIG_ARPD=y # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set +CONFIG_INET_ESP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y @@ -1772,16 +1772,16 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set From e9bcf1418c9ccff30f243005187bbfa659c2df74 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 5 Nov 2009 08:21:18 -0600 Subject: [PATCH 147/743] powerpc: 2.6.32 update of defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx Updated mpc85xx_{smp_}defconfig to enable: * XES_MPC85xx board * PCI MSI * RapidIO Signed-off-by: Kumar Gala --- arch/powerpc/configs/83xx/asp8347_defconfig | 60 +++++++++----- arch/powerpc/configs/83xx/kmeter1_defconfig | 46 +++++----- .../configs/83xx/mpc8313_rdb_defconfig | 73 ++++++++++------ .../configs/83xx/mpc8315_rdb_defconfig | 76 +++++++++++------ .../configs/83xx/mpc832x_mds_defconfig | 62 ++++++++------ .../configs/83xx/mpc832x_rdb_defconfig | 66 +++++++++------ .../configs/83xx/mpc834x_itx_defconfig | 60 +++++++++----- .../configs/83xx/mpc834x_itxgp_defconfig | 58 ++++++++----- .../configs/83xx/mpc834x_mds_defconfig | 58 ++++++++----- .../configs/83xx/mpc836x_mds_defconfig | 64 ++++++++------ .../configs/83xx/mpc836x_rdk_defconfig | 60 ++++++++------ .../configs/83xx/mpc837x_mds_defconfig | 64 +++++++++----- .../configs/83xx/mpc837x_rdb_defconfig | 70 +++++++++++----- arch/powerpc/configs/83xx/sbc834x_defconfig | 61 ++++++++------ arch/powerpc/configs/85xx/ksi8560_defconfig | 61 +++++++++----- .../configs/85xx/mpc8540_ads_defconfig | 57 ++++++++----- .../configs/85xx/mpc8560_ads_defconfig | 63 +++++++++----- .../configs/85xx/mpc85xx_cds_defconfig | 58 ++++++++----- arch/powerpc/configs/85xx/sbc8548_defconfig | 53 +++++++----- arch/powerpc/configs/85xx/sbc8560_defconfig | 57 ++++++++----- arch/powerpc/configs/85xx/socrates_defconfig | 68 +++++++++------ arch/powerpc/configs/85xx/stx_gp3_defconfig | 77 +++++++++++------ arch/powerpc/configs/85xx/tqm8540_defconfig | 59 ++++++++----- arch/powerpc/configs/85xx/tqm8541_defconfig | 64 +++++++++----- arch/powerpc/configs/85xx/tqm8548_defconfig | 64 ++++++++------ arch/powerpc/configs/85xx/tqm8555_defconfig | 64 +++++++++----- arch/powerpc/configs/85xx/tqm8560_defconfig | 64 +++++++++----- .../configs/85xx/xes_mpc85xx_defconfig | 76 ++++++++++++----- arch/powerpc/configs/86xx/gef_ppc9a_defconfig | 74 +++++++++++------ .../powerpc/configs/86xx/gef_sbc310_defconfig | 72 ++++++++++------ .../powerpc/configs/86xx/gef_sbc610_defconfig | 80 ++++++++++++------ .../configs/86xx/mpc8610_hpcd_defconfig | 64 ++++++++------ .../configs/86xx/mpc8641_hpcn_defconfig | 65 +++++++++------ arch/powerpc/configs/86xx/sbc8641d_defconfig | 66 +++++++++------ arch/powerpc/configs/adder875_defconfig | 48 +++++++---- arch/powerpc/configs/c2k_defconfig | 77 +++++++++++------ arch/powerpc/configs/ep8248e_defconfig | 49 +++++++---- arch/powerpc/configs/ep88xc_defconfig | 47 ++++++----- arch/powerpc/configs/linkstation_defconfig | 72 ++++++++++------ arch/powerpc/configs/mgcoge_defconfig | 51 ++++++++---- arch/powerpc/configs/mgsuvd_defconfig | 45 +++++----- arch/powerpc/configs/mpc7448_hpc2_defconfig | 58 ++++++++----- arch/powerpc/configs/mpc8272_ads_defconfig | 52 ++++++++---- arch/powerpc/configs/mpc83xx_defconfig | 75 +++++++++++------ arch/powerpc/configs/mpc85xx_defconfig | 82 +++++++++++------- arch/powerpc/configs/mpc85xx_smp_defconfig | 83 ++++++++++++------- arch/powerpc/configs/mpc866_ads_defconfig | 54 +++++++----- arch/powerpc/configs/mpc86xx_defconfig | 70 ++++++++++------ arch/powerpc/configs/mpc885_ads_defconfig | 47 ++++++----- arch/powerpc/configs/pq2fads_defconfig | 55 +++++++----- arch/powerpc/configs/prpmc2800_defconfig | 67 +++++++++------ arch/powerpc/configs/storcenter_defconfig | 54 +++++++----- 52 files changed, 2093 insertions(+), 1177 deletions(-) diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig index a2df0635b6de..466f09ac3153 100644 --- a/arch/powerpc/configs/83xx/asp8347_defconfig +++ b/arch/powerpc/configs/83xx/asp8347_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:02 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:20 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,28 +127,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -257,6 +260,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -274,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -425,9 +432,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y @@ -628,7 +635,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -658,10 +667,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -760,6 +766,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -814,9 +821,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -834,6 +838,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -883,6 +892,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -894,7 +904,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y # CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y @@ -934,6 +943,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -944,6 +954,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -990,6 +1001,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -1045,6 +1057,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1146,6 +1159,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1215,7 +1229,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1327,6 +1340,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1344,6 +1358,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1365,7 +1380,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1407,11 +1421,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig index 93ebd443a18f..6694fb73cd99 100644 --- a/arch/powerpc/configs/83xx/kmeter1_defconfig +++ b/arch/powerpc/configs/83xx/kmeter1_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:03 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:21 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -86,11 +87,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -119,20 +121,19 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -140,6 +141,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -250,6 +253,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -267,6 +271,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -348,6 +353,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_STP=m @@ -396,9 +402,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -565,18 +571,16 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -663,6 +667,7 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -693,9 +698,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -713,7 +715,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -732,6 +733,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -784,6 +786,7 @@ CONFIG_UIO=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -854,7 +857,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -926,6 +928,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -942,6 +945,7 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index ff33a7db2eab..86df19f041a4 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:04 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:22 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -427,9 +434,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -488,6 +495,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -605,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -643,7 +652,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -741,9 +752,11 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -791,10 +804,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -896,6 +906,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -950,9 +961,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -984,6 +992,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -1036,6 +1049,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1048,9 +1062,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1088,8 +1100,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -1099,6 +1113,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1112,7 +1127,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1164,6 +1178,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1255,6 +1270,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set @@ -1273,6 +1289,7 @@ CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set @@ -1334,6 +1351,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1384,6 +1402,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1453,7 +1472,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1569,6 +1587,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1586,6 +1605,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1604,10 +1624,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1630,10 +1652,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1660,7 +1682,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1702,11 +1723,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 76237d466702..7bf71d577033 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:05 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:23 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -427,9 +434,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set @@ -488,6 +495,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -605,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -644,11 +653,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -671,6 +683,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -698,6 +711,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -802,9 +816,11 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -852,10 +868,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -957,6 +970,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1011,9 +1025,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1045,6 +1056,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -1097,6 +1113,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1109,9 +1126,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1149,8 +1164,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -1160,6 +1177,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1173,7 +1191,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1225,6 +1242,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1316,6 +1334,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set @@ -1334,6 +1353,7 @@ CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set @@ -1395,6 +1415,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1445,6 +1466,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1514,7 +1536,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1630,6 +1651,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1647,6 +1669,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1665,10 +1688,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1691,10 +1716,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1721,7 +1746,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1763,11 +1787,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index e0e36a113409..7def83518a6c 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:06 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:24 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -257,6 +260,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -274,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -504,6 +511,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -542,7 +550,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -612,7 +622,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -635,7 +647,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -663,10 +674,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -759,6 +767,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -812,9 +821,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -832,6 +838,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -881,6 +892,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -892,9 +904,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -927,6 +937,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -937,6 +948,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -950,7 +962,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1070,6 +1081,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1128,7 +1140,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1202,6 +1213,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1219,6 +1231,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1240,7 +1253,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1282,11 +1294,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index 4f27d4548223..b398b9b2b635 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:07 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:24 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -257,6 +260,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -274,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -507,6 +514,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -545,7 +553,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -617,7 +627,9 @@ CONFIG_MII=y # CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -640,7 +652,6 @@ CONFIG_E1000=y CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -668,10 +679,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -776,6 +784,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -830,9 +839,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -863,6 +869,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -915,6 +926,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -927,9 +939,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -967,8 +977,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -978,6 +990,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -991,7 +1004,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1043,6 +1055,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1146,6 +1159,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y # # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set # CONFIG_MMC_TIFM_SD is not set CONFIG_MMC_SPI=y # CONFIG_MMC_CB710 is not set @@ -1186,6 +1201,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1247,7 +1263,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1365,6 +1380,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1382,6 +1398,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1403,7 +1420,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1445,11 +1461,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 648dac0c9d8d..f67317e1934c 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:07 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:25 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -368,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -397,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -417,6 +423,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -424,9 +431,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set # CONFIG_MTD_PARTITIONS is not set -# CONFIG_MTD_TESTS is not set # # User Modules And Translation Layers @@ -483,6 +490,7 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -637,6 +645,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -676,11 +685,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -703,6 +715,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -730,6 +743,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -845,10 +859,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -930,6 +941,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -984,9 +996,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_SENSORS_PCF8574=y -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1017,7 +1026,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1055,8 +1063,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -1066,6 +1076,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1111,6 +1122,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -1238,6 +1250,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1288,6 +1301,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1350,7 +1364,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1465,6 +1478,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1482,6 +1496,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1503,7 +1518,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1545,11 +1559,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index bf6deb831dc3..a668110c10f6 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:08 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:26 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -368,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -397,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -417,6 +423,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -424,9 +431,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set # CONFIG_MTD_PARTITIONS is not set -# CONFIG_MTD_TESTS is not set # # User Modules And Translation Layers @@ -483,6 +490,7 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -589,6 +597,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -627,7 +636,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -725,10 +736,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -810,6 +818,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -864,9 +873,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_SENSORS_PCF8574=y -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -897,7 +903,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -935,8 +940,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -946,6 +953,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -991,6 +999,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -1059,6 +1068,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1117,6 +1127,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1167,6 +1178,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1229,7 +1241,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1344,6 +1355,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1361,6 +1373,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1382,7 +1395,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1424,11 +1436,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index 3236c47712c2..c4e92ba5c38b 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:09 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:27 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -368,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -397,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -417,6 +423,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -556,9 +563,11 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -606,10 +615,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -699,6 +705,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -752,9 +759,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -772,6 +776,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -821,6 +830,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -832,9 +842,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -867,6 +875,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -877,6 +886,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -890,7 +900,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1010,6 +1019,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1068,7 +1078,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1140,6 +1149,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1157,6 +1167,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1178,7 +1189,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1220,11 +1230,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index 8c5299d74813..4f434b1492fa 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:10 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:28 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -255,6 +258,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -272,6 +276,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -367,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -396,6 +402,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -403,7 +410,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -416,6 +422,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -423,9 +430,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -585,6 +592,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -623,7 +631,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -693,7 +703,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -716,7 +728,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -744,10 +755,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -840,6 +848,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -893,9 +902,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -913,6 +919,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -962,6 +973,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -973,9 +985,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1008,6 +1018,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1018,6 +1029,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1031,7 +1043,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1151,6 +1162,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1210,7 +1222,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1284,6 +1295,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1301,6 +1313,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1322,7 +1335,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1364,11 +1376,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index ff31667a890b..b52ec0861679 100644 --- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:12 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:30 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,28 +127,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -255,6 +258,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -272,6 +276,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -427,9 +434,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -493,6 +500,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -639,7 +647,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -649,10 +656,7 @@ CONFIG_UCC_GETH=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -750,6 +754,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -804,9 +809,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -853,17 +855,22 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -897,8 +904,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -908,6 +917,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -992,7 +1002,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1038,6 +1047,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1107,7 +1117,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1183,6 +1192,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1200,6 +1210,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1232,7 +1243,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1274,11 +1284,13 @@ CONFIG_CRYPTO_CBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index e285ec0fe958..730061574f96 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:11 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:29 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,21 +127,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -147,6 +148,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -368,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -397,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -417,6 +423,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -503,6 +510,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -542,11 +550,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -569,6 +580,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -596,6 +608,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -672,7 +685,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -720,10 +735,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -816,6 +828,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -869,9 +882,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -889,6 +899,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -938,6 +953,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -949,9 +965,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -984,6 +998,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -994,6 +1009,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1007,7 +1023,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1072,6 +1087,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1130,7 +1146,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1206,6 +1221,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1221,6 +1237,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1242,7 +1259,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1284,11 +1300,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index 1ab3e4cd3018..9e9158a5b190 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:13 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:30 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,21 +127,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -147,6 +148,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -363,6 +368,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -392,6 +398,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -399,7 +406,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -412,6 +418,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -498,6 +505,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -537,11 +545,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -564,6 +575,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -591,6 +603,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -610,6 +623,7 @@ CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=y CONFIG_MD_RAID6_PQ=y +# CONFIG_ASYNC_RAID6_TEST is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -678,7 +692,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -708,10 +724,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -813,6 +826,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -867,9 +881,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -887,6 +898,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -936,6 +952,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -947,9 +964,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -987,6 +1002,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -997,6 +1013,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1010,7 +1027,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1033,6 +1049,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1085,6 +1102,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -1142,6 +1160,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1188,6 +1207,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1246,7 +1266,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1361,6 +1380,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1376,6 +1396,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1396,12 +1417,13 @@ CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y +CONFIG_ASYNC_PQ=y +CONFIG_ASYNC_RAID6_RECOV=y CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1443,11 +1465,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index 3a68f861b1bd..6b399154970f 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc5 -# Tue Aug 11 19:57:51 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:31 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,27 +126,28 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -254,6 +257,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -271,6 +275,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -366,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -395,6 +401,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -402,7 +409,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -415,6 +421,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -422,9 +429,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -651,7 +658,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -681,10 +690,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -786,6 +792,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -840,9 +847,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -860,6 +864,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -909,6 +918,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -920,9 +930,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -960,6 +968,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -970,6 +979,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -983,7 +993,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1035,6 +1044,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -1148,6 +1158,7 @@ CONFIG_JBD=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1207,7 +1218,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1306,6 +1316,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1321,6 +1332,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1342,7 +1354,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1384,11 +1395,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index ff04e1028f5e..a5bde8da462c 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:14 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:32 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -123,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -188,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set CONFIG_KSI8560=y # CONFIG_XES_MPC85xx is not set @@ -243,6 +248,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -260,6 +266,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -348,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -377,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -384,7 +393,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -397,6 +405,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -582,6 +591,8 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -591,10 +602,7 @@ CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -704,10 +712,19 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set @@ -719,9 +736,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -755,7 +770,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -818,6 +832,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -877,7 +892,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -945,6 +959,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -962,6 +977,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -981,10 +997,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1008,10 +1026,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1039,7 +1057,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1070,11 +1087,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index fb10cc83702e..c10e26f8763f 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:15 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:33 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -126,27 +129,28 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -189,6 +193,7 @@ CONFIG_MPC8540_ADS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -244,6 +249,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -261,6 +267,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -349,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -378,6 +386,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -385,7 +394,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -398,6 +406,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -483,15 +492,14 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -588,6 +596,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set @@ -598,9 +611,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -634,7 +645,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -696,6 +706,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -754,7 +765,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -822,6 +832,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -839,6 +850,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -857,10 +869,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -883,10 +897,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -912,7 +926,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -943,11 +956,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 5c8ce6978825..8d9f0a4b5205 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:16 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:34 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -127,29 +130,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -192,6 +196,7 @@ CONFIG_MPC8560_ADS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -247,6 +252,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -264,6 +270,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -361,6 +368,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -390,6 +398,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -397,7 +406,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -410,6 +418,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -530,7 +539,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -582,10 +593,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -698,14 +706,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set @@ -721,9 +739,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -746,6 +762,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -759,7 +776,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -824,6 +840,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -882,7 +899,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -950,6 +966,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -967,6 +984,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -985,10 +1003,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1011,10 +1031,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1040,7 +1060,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1071,11 +1090,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index 158e63e8607f..9b63e258dac6 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:17 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:35 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -126,28 +129,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -190,6 +194,7 @@ CONFIG_MPC85xx_CDS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -245,6 +250,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -262,6 +268,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -359,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -388,6 +396,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -395,7 +404,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -408,6 +416,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -582,7 +591,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -630,10 +641,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -737,6 +745,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set @@ -751,9 +764,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -776,6 +787,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -789,7 +801,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -854,6 +865,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -912,7 +924,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -980,6 +991,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -997,6 +1009,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1015,10 +1028,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1041,10 +1056,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1070,7 +1085,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1101,11 +1115,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 2726fca1d694..1b2356830173 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:18 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:36 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,27 +128,28 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -188,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -242,6 +247,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -259,6 +265,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -355,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -384,6 +392,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -391,7 +400,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -404,6 +412,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -521,7 +530,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -569,10 +580,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -676,6 +684,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set @@ -690,9 +703,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -715,6 +726,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -758,6 +770,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -816,7 +829,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -872,6 +884,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -887,6 +900,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -907,7 +921,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -938,11 +951,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index b0c469823b02..959d0281431b 100644 --- a/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:19 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:37 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -126,26 +129,27 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -188,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -242,6 +247,7 @@ CONFIG_BINFMT_MISC=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -259,6 +265,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -347,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -376,6 +384,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -383,7 +392,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -396,6 +404,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -481,15 +490,14 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -584,6 +592,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set @@ -594,9 +607,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -630,7 +641,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -721,6 +731,7 @@ CONFIG_RTC_DRV_M48T59=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -779,7 +790,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -847,6 +857,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -863,6 +874,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -881,10 +893,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -907,10 +921,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -947,7 +961,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -978,11 +991,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig index 04c85dada845..7f5ec35bf199 100644 --- a/arch/powerpc/configs/85xx/socrates_defconfig +++ b/arch/powerpc/configs/85xx/socrates_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:19 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:37 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=16 CONFIG_GROUP_SCHED=y @@ -124,28 +127,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -193,6 +197,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set CONFIG_SOCRATES=y # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -247,6 +252,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -264,6 +270,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -358,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -396,6 +404,7 @@ CONFIG_CAN_BCM=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -403,7 +412,6 @@ CONFIG_WIRELESS=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -421,9 +429,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -482,6 +490,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -668,7 +677,9 @@ CONFIG_MII=y # CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -698,10 +709,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -765,6 +773,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set @@ -774,7 +783,6 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set -# CONFIG_TOUCHSCREEN_W90X900 is not set # CONFIG_INPUT_MISC is not set # @@ -834,6 +842,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -888,9 +897,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -921,6 +927,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -973,6 +984,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -985,9 +997,7 @@ CONFIG_SENSORS_W83781D=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set -CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1006,8 +1016,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -1017,6 +1029,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1112,7 +1125,6 @@ CONFIG_FONT_8x16=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1135,6 +1147,7 @@ CONFIG_USB_HID=y # CONFIG_HID_EZKEY is not set # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set @@ -1184,6 +1197,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1319,6 +1333,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1369,6 +1384,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1438,7 +1454,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1552,6 +1567,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1569,6 +1585,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1589,7 +1606,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1621,11 +1637,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index e7e81d6769fe..c8327e88a987 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:20 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:38 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -127,22 +130,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -150,7 +152,9 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -197,6 +201,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -252,6 +257,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -269,6 +275,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -426,6 +433,7 @@ CONFIG_IP_NF_FILTER=m # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -455,6 +463,7 @@ CONFIG_NET_PKTGEN=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -462,7 +471,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -475,6 +483,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -622,6 +631,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -662,7 +672,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -732,8 +744,10 @@ CONFIG_NET_ETHERNET=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NET_POCKET is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -782,10 +796,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -827,11 +838,15 @@ CONFIG_INPUT_EVDEV=m # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -842,6 +857,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -909,6 +925,7 @@ CONFIG_HW_RANDOM=m CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=m @@ -967,9 +984,6 @@ CONFIG_I2C_ALGOBIT=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1003,14 +1017,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1061,6 +1085,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1072,9 +1097,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1092,6 +1115,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TPS65010 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1102,6 +1126,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # CONFIG_AGP=m +CONFIG_VGA_ARB=y CONFIG_DRM=m # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set @@ -1125,7 +1150,6 @@ CONFIG_SOUND=m # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1190,6 +1214,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1254,7 +1279,6 @@ CONFIG_CRAMFS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1352,6 +1376,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1369,6 +1394,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1388,10 +1414,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1414,10 +1442,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1443,7 +1471,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1475,11 +1502,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index 2c407523aad2..82563703d5e3 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:21 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:39 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +127,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -188,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -243,6 +248,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -260,6 +266,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -354,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -383,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -390,7 +399,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -677,9 +685,11 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -727,10 +737,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -824,6 +831,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -876,9 +884,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -896,6 +901,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -945,6 +955,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -956,9 +967,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -977,6 +986,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -987,6 +997,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1000,7 +1011,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1065,6 +1075,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1134,7 +1145,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1203,6 +1213,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1220,6 +1231,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1240,7 +1252,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1271,11 +1282,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index 845731dc51c6..91d85d733827 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:22 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:40 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,29 +128,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -190,6 +194,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -246,6 +251,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -263,6 +269,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -357,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -386,6 +394,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -393,7 +402,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -681,9 +689,11 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -732,10 +742,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -831,6 +838,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -886,9 +894,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -921,14 +926,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -979,6 +994,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -990,9 +1006,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1012,6 +1026,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1022,6 +1037,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1035,7 +1051,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1100,6 +1115,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1169,7 +1185,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1238,6 +1253,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1255,6 +1271,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1275,7 +1292,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1306,11 +1322,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig index 4f228a905274..debe268f43d1 100644 --- a/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:23 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:41 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -126,22 +129,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -149,6 +151,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -196,6 +200,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -252,6 +257,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -269,6 +275,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -371,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -411,6 +419,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -420,9 +429,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -630,7 +639,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -678,10 +689,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -772,6 +780,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -825,9 +834,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -845,6 +851,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -894,6 +905,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -905,9 +917,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -926,6 +936,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -936,6 +947,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -949,7 +961,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1042,6 +1053,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1111,7 +1123,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1180,6 +1191,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1197,6 +1209,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1216,10 +1229,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1242,10 +1257,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1271,7 +1286,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1303,11 +1317,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index 9196724bebc7..74515501f5b7 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:24 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:42 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,29 +128,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -190,6 +194,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -246,6 +251,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -263,6 +269,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -357,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -386,6 +394,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -393,7 +402,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -681,9 +689,11 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -732,10 +742,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -831,6 +838,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -886,9 +894,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -921,14 +926,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -979,6 +994,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -990,9 +1006,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1012,6 +1026,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1022,6 +1037,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1035,7 +1051,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1100,6 +1115,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1169,7 +1185,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1238,6 +1253,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1255,6 +1271,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1275,7 +1292,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1306,11 +1322,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index 2e49a6e9faf2..631d92b4d4e6 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:25 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:43 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,29 +128,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -190,6 +194,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -246,6 +251,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -263,6 +269,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -357,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -386,6 +394,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -393,7 +402,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -681,9 +689,11 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -732,10 +742,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -831,6 +838,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -886,9 +894,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -921,14 +926,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -979,6 +994,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -990,9 +1006,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1012,6 +1026,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1022,6 +1037,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1035,7 +1051,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1100,6 +1115,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1169,7 +1185,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1238,6 +1253,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1255,6 +1271,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1275,7 +1292,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1306,11 +1322,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig index 1025da2bf069..52acbac0c4fe 100644 --- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig +++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:25 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:44 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set CONFIG_SMP=y @@ -37,6 +38,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -89,11 +91,12 @@ CONFIG_AUDIT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -128,22 +131,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -151,7 +153,9 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -201,6 +205,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set CONFIG_XES_MPC85xx=y @@ -256,6 +261,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_IRQ_ALL_CPUS is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +279,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -405,6 +412,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -446,6 +454,7 @@ CONFIG_FIB_RULES=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -457,9 +466,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set @@ -635,6 +644,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -674,11 +684,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -701,6 +714,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -728,6 +742,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -804,7 +819,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -834,10 +851,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -951,6 +965,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1006,8 +1021,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1041,14 +1054,24 @@ CONFIG_GPIO_PCA953X=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1099,6 +1122,7 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1110,9 +1134,7 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1151,6 +1173,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1161,6 +1184,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1181,7 +1205,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1204,6 +1227,7 @@ CONFIG_USB_HID=y # CONFIG_HID_EZKEY is not set # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set @@ -1249,6 +1273,7 @@ CONFIG_USB_MON=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_ISP1760_HCD=y +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -1466,6 +1491,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1541,7 +1567,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1658,6 +1683,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1675,6 +1701,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1694,10 +1721,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set @@ -1720,10 +1749,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1749,7 +1778,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1790,11 +1818,13 @@ CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig index 527ad1a5e802..28980738776c 100644 --- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:31 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:49 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +89,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -130,21 +132,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -152,12 +153,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -256,6 +259,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -417,6 +422,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -458,6 +464,7 @@ CONFIG_FIB_RULES=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -467,9 +474,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -680,6 +687,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -719,12 +727,15 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -747,6 +758,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -775,6 +787,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -851,7 +864,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -881,10 +896,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -1016,6 +1028,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1071,9 +1084,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # CONFIG_DS1682=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1106,14 +1116,24 @@ CONFIG_GPIO_SYSFS=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1164,6 +1184,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1175,9 +1196,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1217,6 +1236,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1227,6 +1247,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1247,7 +1268,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1270,6 +1290,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1322,6 +1343,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1397,6 +1419,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1501,6 +1524,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1576,7 +1600,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1682,6 +1705,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1697,6 +1721,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1718,7 +1743,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m @@ -1761,11 +1785,13 @@ CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_HMAC=m # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig index cd338d493bed..e199d1cacbaf 100644 --- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:29 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:47 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +89,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -130,21 +132,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -152,12 +153,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -256,6 +259,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -417,6 +422,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -458,6 +464,7 @@ CONFIG_FIB_RULES=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -467,9 +474,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -680,6 +687,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -719,12 +727,15 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set CONFIG_SATA_SIL24=y @@ -796,7 +807,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -826,10 +839,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -961,6 +971,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1016,9 +1027,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # CONFIG_DS1682=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1051,14 +1059,24 @@ CONFIG_GPIO_SYSFS=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1109,6 +1127,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1120,9 +1139,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1162,6 +1179,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1172,6 +1190,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1192,7 +1211,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1215,6 +1233,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1267,6 +1286,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1342,6 +1362,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1446,6 +1467,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1521,7 +1543,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1627,6 +1648,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1642,6 +1664,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1663,7 +1686,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m @@ -1706,11 +1728,13 @@ CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_HMAC=m # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index ba47883f4aa0..3b0fbfb28efd 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:30 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:48 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +89,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -131,21 +133,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -153,12 +154,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -257,6 +260,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -274,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -503,6 +508,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set CONFIG_TIPC=m # CONFIG_TIPC_ADVANCED is not set # CONFIG_TIPC_DEBUG is not set @@ -582,6 +588,7 @@ CONFIG_NET_PKTGEN=m CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -589,7 +596,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -602,6 +608,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -611,9 +618,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set @@ -780,6 +787,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -819,11 +827,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -846,6 +857,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -873,6 +885,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -949,7 +962,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -979,10 +994,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -1120,6 +1132,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1175,9 +1188,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # CONFIG_DS1682=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1211,14 +1221,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1269,6 +1289,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1280,9 +1301,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1322,6 +1341,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1332,6 +1352,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1352,7 +1373,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1375,6 +1395,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1427,6 +1448,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1502,6 +1524,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_ATM is not set @@ -1607,6 +1630,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1669,7 +1693,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1775,6 +1798,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1791,6 +1815,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1810,10 +1835,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1837,10 +1864,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1872,7 +1899,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m @@ -1915,11 +1941,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig index a61f183f7186..de4d52504fe4 100644 --- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:27 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:45 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -83,11 +84,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -126,22 +128,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -149,6 +150,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -251,6 +254,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -268,6 +272,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -385,6 +390,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -414,6 +420,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -421,7 +428,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -434,6 +440,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -445,9 +452,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -662,6 +669,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -701,11 +709,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -728,6 +739,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -755,6 +767,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -818,14 +831,13 @@ CONFIG_ULI526X=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -929,6 +941,7 @@ CONFIG_UNIX98_PTYS=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -982,9 +995,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1002,7 +1012,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1021,6 +1030,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1031,6 +1041,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1107,6 +1118,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_LOGO is not set CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1209,7 +1221,6 @@ CONFIG_SND_SOC_CS4270_VD33_ERRATA=y # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1329,6 +1340,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -1388,7 +1400,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1505,6 +1516,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1522,6 +1534,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1541,10 +1554,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1567,10 +1582,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1597,7 +1612,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1629,11 +1643,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index 7016ce732605..754a79ba74a9 100644 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:28 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:46 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -87,11 +88,12 @@ CONFIG_AUDIT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -130,22 +132,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -153,7 +154,9 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -251,13 +254,13 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_IOMMU_HELPER=y CONFIG_SWIOTLB=y -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -275,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -404,6 +408,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -434,6 +439,7 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -441,7 +447,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -454,6 +459,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -546,6 +552,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -585,11 +592,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -612,6 +622,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -639,6 +650,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -715,7 +727,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -763,10 +777,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -880,6 +891,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -934,9 +946,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -954,7 +963,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -973,6 +981,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -983,6 +992,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1002,6 +1012,7 @@ CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1105,7 +1116,6 @@ CONFIG_SND_USB=y CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1128,6 +1138,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1180,6 +1191,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y @@ -1358,6 +1370,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1428,7 +1441,6 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1546,6 +1558,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1563,6 +1576,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1582,10 +1596,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1608,10 +1624,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1638,7 +1654,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1680,11 +1695,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig index f5ca2e0cd402..89991f157ae8 100644 --- a/arch/powerpc/configs/86xx/sbc8641d_defconfig +++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:26 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:45 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -87,11 +88,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -130,21 +132,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -152,13 +153,15 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -257,6 +260,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -274,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -502,6 +507,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set CONFIG_TIPC=m # CONFIG_TIPC_ADVANCED is not set # CONFIG_TIPC_DEBUG is not set @@ -581,6 +587,7 @@ CONFIG_NET_PKTGEN=m CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -588,7 +595,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -601,6 +607,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -610,9 +617,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set @@ -833,7 +840,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -863,10 +872,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -996,6 +1002,7 @@ CONFIG_HW_RANDOM=m CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1049,9 +1056,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1069,6 +1073,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1118,6 +1127,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1129,9 +1139,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1164,6 +1172,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1174,6 +1183,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1194,7 +1204,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1274,6 +1283,7 @@ CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set # CONFIG_OCFS2_FS_POSIX_ACL is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1343,7 +1353,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1451,6 +1460,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1467,6 +1477,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1486,10 +1497,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1514,10 +1527,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1550,7 +1563,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m @@ -1593,11 +1605,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index aece6bb5f733..052cf134e018 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:47 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:04 2009 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_PPC_8xx=y # CONFIG_E200 is not set CONFIG_8xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,6 +30,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -78,11 +80,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -116,28 +119,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -235,10 +239,10 @@ CONFIG_BINFMT_ELF=y # CONFIG_8XX_MINIMAL_FPEMU is not set # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -256,6 +260,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -338,6 +343,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -367,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -374,7 +381,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -387,6 +393,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -530,16 +537,15 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FEC=y CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -580,6 +586,7 @@ CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -590,6 +597,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set @@ -716,6 +724,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -775,7 +784,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -847,6 +855,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -864,6 +873,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -880,10 +890,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -906,10 +918,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig index 8105360d53f4..0fb65a85dfdf 100644 --- a/arch/powerpc/configs/c2k_defconfig +++ b/arch/powerpc/configs/c2k_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:48 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:05 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC_HAVE_PMU_SUPPORT=y +CONFIG_PPC_PERF_CTRS=y # CONFIG_SMP is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_CHECK_CACHE_COHERENCY=y @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +90,12 @@ CONFIG_AUDIT_TREE=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_GROUP_SCHED=y @@ -135,23 +138,24 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +CONFIG_PERF_EVENTS=y +CONFIG_EVENT_PROFILE=y # CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -CONFIG_MARKERS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y @@ -161,12 +165,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -275,12 +281,12 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -298,6 +304,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -309,6 +316,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_EXTRA_TARGETS="" CONFIG_PM=y # CONFIG_PM_DEBUG is not set +# CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -674,10 +682,12 @@ CONFIG_BT_HCIBCM203X=m # CONFIG_BT_HCIBPA10X is not set CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIVHCI=m +# CONFIG_BT_MRVL is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y @@ -686,7 +696,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -699,6 +708,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -710,9 +720,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=m CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -763,6 +773,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PCI is not set +# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -857,6 +868,7 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_ACARD=m @@ -912,7 +924,9 @@ CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -982,7 +996,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -1010,10 +1026,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -1145,6 +1158,7 @@ CONFIG_MAX_RAW_DEVS=8192 CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y @@ -1200,9 +1214,6 @@ CONFIG_I2C_MV64XXX=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_SENSORS_PCF8574=m -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1220,6 +1231,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=m CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set CONFIG_SENSORS_ADM1021=m @@ -1269,6 +1285,7 @@ CONFIG_SENSORS_SMSC47B397=m # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set CONFIG_SENSORS_VIA686A=m # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1280,7 +1297,6 @@ CONFIG_SENSORS_W83L785TS=m # CONFIG_SENSORS_W83L786NG is not set CONFIG_SENSORS_W83627HF=m # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1317,6 +1333,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1327,6 +1344,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1378,6 +1396,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=m CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1588,6 +1607,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1668,7 +1688,6 @@ CONFIG_VXFS_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1770,7 +1789,7 @@ CONFIG_BINARY_PRINTF=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set +CONFIG_CRC16=m CONFIG_CRC_T10DIF=m CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1797,6 +1816,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1814,6 +1834,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y @@ -1834,11 +1855,13 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set @@ -1852,6 +1875,7 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y @@ -1869,6 +1893,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1899,6 +1924,7 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_LSM_MMAP_MIN_ADDR=65536 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 @@ -1913,7 +1939,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m @@ -1956,11 +1981,13 @@ CONFIG_CRYPTO_ECB=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index 0aa5b43ffeb2..ef5edc7203f5 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:49 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:06 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -82,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -116,28 +118,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -150,6 +153,7 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -233,6 +237,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -246,6 +251,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -394,6 +400,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -401,7 +408,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -413,6 +419,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -600,7 +607,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -648,10 +657,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -736,15 +742,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -767,6 +777,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -968,6 +979,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -998,10 +1010,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1024,6 +1038,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1052,7 +1067,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1094,6 +1108,7 @@ CONFIG_CRYPTO_PCBC=y # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index 2c292e25cc01..73ef9be41280 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:49 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:07 2009 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_PPC_8xx=y # CONFIG_E200 is not set CONFIG_8xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,6 +30,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -77,11 +79,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -115,28 +118,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -234,10 +238,10 @@ CONFIG_BINFMT_ELF=y CONFIG_8XX_MINIMAL_FPEMU=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -255,6 +259,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -337,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -366,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -373,7 +380,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -386,6 +392,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -529,16 +536,15 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FEC=y CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -611,7 +617,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -672,6 +677,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -731,7 +737,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -803,6 +808,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -820,6 +826,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -836,10 +843,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -861,10 +870,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 45671e7dd2c7..63c3e8de8f16 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:50 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:08 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -83,11 +84,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -131,22 +133,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -154,11 +155,13 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -258,6 +261,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -275,6 +279,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -482,6 +487,7 @@ CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -511,6 +517,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y @@ -519,7 +526,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -532,6 +538,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -543,9 +550,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -711,6 +718,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -750,11 +758,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -777,6 +788,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -804,6 +816,7 @@ CONFIG_PATA_IT821X=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -870,7 +883,9 @@ CONFIG_TULIP_MMIO=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -918,10 +933,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -1043,6 +1055,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1097,9 +1110,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1117,6 +1127,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1166,6 +1181,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1177,9 +1193,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1198,6 +1212,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1208,6 +1223,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1227,7 +1243,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1271,6 +1286,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1500,6 +1516,7 @@ CONFIG_XFS_FS=m # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1567,7 +1584,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1681,6 +1697,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1698,6 +1715,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1716,10 +1734,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1742,6 +1762,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1771,7 +1792,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1813,11 +1833,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig index 30b68bfacebf..520b04a0def9 100644 --- a/arch/powerpc/configs/mgcoge_defconfig +++ b/arch/powerpc/configs/mgcoge_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc5 -# Fri Aug 7 08:19:15 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:09 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -123,28 +125,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -247,6 +250,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -260,6 +264,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -390,6 +395,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -397,7 +403,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -409,6 +414,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -608,7 +614,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FCC=y @@ -616,10 +624,7 @@ CONFIG_FS_ENET_MDIO_FCC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -685,6 +690,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -740,7 +746,6 @@ CONFIG_I2C_CPM=y # # Miscellaneous I2C Chip support # -# CONFIG_PCF8575 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -771,15 +776,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -799,6 +808,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -809,6 +819,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1022,6 +1033,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1052,10 +1064,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1079,6 +1093,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1109,7 +1124,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1151,6 +1165,7 @@ CONFIG_CRYPTO_PCBC=y # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig index 1ae85a3b2942..43c3c4fcdce3 100644 --- a/arch/powerpc/configs/mgsuvd_defconfig +++ b/arch/powerpc/configs/mgsuvd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:52 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:10 2009 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_PPC_8xx=y # CONFIG_E200 is not set CONFIG_8xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,6 +30,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -76,11 +78,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_GROUP_SCHED=y @@ -117,27 +120,28 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -237,10 +241,10 @@ CONFIG_BINFMT_ELF=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -258,6 +262,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -344,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -373,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -380,7 +387,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -553,16 +559,15 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y # CONFIG_FS_ENET_HAS_FEC is not set # CONFIG_FS_ENET_MDIO_FEC is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -635,7 +640,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -707,6 +711,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -776,7 +781,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -851,6 +855,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -865,6 +870,7 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -887,7 +893,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -918,11 +923,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index f23428c3b34e..d8b364a45944 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:53 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:10 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -82,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -123,28 +125,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -241,6 +244,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -258,6 +262,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -350,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -379,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -386,7 +393,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -399,6 +405,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -478,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -517,11 +525,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -543,6 +554,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -570,6 +582,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -666,9 +679,11 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -715,10 +730,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -822,6 +834,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set @@ -836,9 +853,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -861,6 +876,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -874,7 +890,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -939,6 +954,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -997,7 +1013,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1069,6 +1084,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1086,6 +1102,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1107,7 +1124,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1138,11 +1154,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index 02716f72db6f..00fad81b6fce 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:54 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:11 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -82,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -116,29 +118,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -151,6 +154,7 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -236,6 +240,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -249,6 +254,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -397,6 +403,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -416,6 +422,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -477,7 +484,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_MTD_SBC8240 is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -604,7 +610,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -652,10 +660,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -704,6 +709,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -714,6 +720,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set @@ -793,15 +800,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -824,6 +835,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1032,6 +1044,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1067,10 +1080,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1093,6 +1108,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1121,7 +1137,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1163,6 +1178,7 @@ CONFIG_CRYPTO_PCBC=y # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index d6d28f2a23c1..64dff21516cb 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:55 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:12 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -86,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -127,21 +129,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -149,6 +150,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -263,6 +266,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -280,6 +284,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -378,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -407,6 +413,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -414,7 +421,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -427,6 +433,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -434,9 +441,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -609,6 +616,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -648,11 +656,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -675,6 +686,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -702,6 +714,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -778,7 +791,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -801,7 +816,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -829,10 +843,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -936,6 +947,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -991,9 +1003,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1026,14 +1035,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1084,6 +1103,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1095,9 +1115,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1136,6 +1154,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1146,6 +1165,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1159,7 +1179,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1182,6 +1201,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1234,6 +1254,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_FHCI_HCD is not set @@ -1292,6 +1313,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1339,6 +1361,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1398,7 +1421,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1515,6 +1537,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1530,6 +1553,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1551,7 +1575,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y @@ -1594,11 +1617,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 70851ee74340..a12e7ba87a43 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:55 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:25:20 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +90,12 @@ CONFIG_AUDIT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -131,22 +134,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -154,7 +156,9 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -189,6 +193,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_FREEZER is not set +CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -206,7 +211,7 @@ CONFIG_MPC85xx_DS=y CONFIG_MPC85xx_RDB=y CONFIG_SOCRATES=y CONFIG_KSI8560=y -# CONFIG_XES_MPC85xx is not set +CONFIG_XES_MPC85xx=y CONFIG_STX_GP3=y CONFIG_TQM8540=y CONFIG_TQM8541=y @@ -259,10 +264,10 @@ CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_IOMMU_HELPER=y CONFIG_SWIOTLB=y -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -280,6 +285,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -307,7 +313,7 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set +CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set @@ -315,7 +321,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y -# CONFIG_RAPIDIO is not set +CONFIG_RAPIDIO=y +CONFIG_RAPIDIO_DISC_TIMEOUT=30 # # Advanced setup @@ -411,6 +418,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -441,6 +449,7 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -448,7 +457,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -461,6 +469,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -554,6 +563,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -593,11 +603,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -620,6 +633,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -647,6 +661,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -723,7 +738,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FCC=y @@ -750,7 +767,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -778,10 +794,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -798,6 +811,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set +# CONFIG_RIONET is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set @@ -898,6 +912,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -955,9 +970,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -991,15 +1003,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1020,6 +1036,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1030,6 +1047,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1049,6 +1067,7 @@ CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1152,7 +1171,6 @@ CONFIG_SND_USB=y CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1175,6 +1193,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1227,6 +1246,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y @@ -1241,7 +1261,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set -# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1429,6 +1448,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1499,7 +1519,6 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1620,6 +1639,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1637,6 +1657,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1656,10 +1677,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1683,10 +1706,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1714,7 +1737,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y @@ -1757,11 +1779,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index ab45fd99afc3..cd70b4a4ce01 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:56 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:26:01 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set CONFIG_SMP=y @@ -37,6 +38,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -89,11 +91,12 @@ CONFIG_AUDIT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -132,22 +135,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -155,8 +157,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -192,6 +196,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_FREEZER is not set +CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -206,9 +211,10 @@ CONFIG_MPC85xx_CDS=y CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y +CONFIG_MPC85xx_RDB=y CONFIG_SOCRATES=y CONFIG_KSI8560=y -# CONFIG_XES_MPC85xx is not set +CONFIG_XES_MPC85xx=y CONFIG_STX_GP3=y CONFIG_TQM8540=y CONFIG_TQM8541=y @@ -261,11 +267,11 @@ CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_IOMMU_HELPER=y CONFIG_SWIOTLB=y -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_IRQ_ALL_CPUS is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -283,6 +289,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -310,7 +317,7 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set +CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set @@ -318,7 +325,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y -# CONFIG_RAPIDIO is not set +CONFIG_RAPIDIO=y +CONFIG_RAPIDIO_DISC_TIMEOUT=30 # # Advanced setup @@ -414,6 +422,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -444,6 +453,7 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -451,7 +461,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -464,6 +473,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -557,6 +567,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -596,11 +607,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -623,6 +637,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -650,6 +665,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -726,7 +742,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FCC=y @@ -753,7 +771,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -781,10 +798,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -801,6 +815,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set +# CONFIG_RIONET is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set @@ -901,6 +916,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -958,9 +974,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -994,15 +1007,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1023,6 +1040,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1033,6 +1051,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1052,6 +1071,7 @@ CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1155,7 +1175,6 @@ CONFIG_SND_USB=y CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1178,6 +1197,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1230,6 +1250,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y @@ -1244,7 +1265,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set -# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1432,6 +1452,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1502,7 +1523,6 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1623,6 +1643,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1640,6 +1661,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1659,10 +1681,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1686,10 +1710,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1717,7 +1741,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y @@ -1760,11 +1783,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 6809b61ed3de..40d6f0568ca5 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:57 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:15 2009 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_PPC_8xx=y # CONFIG_E200 is not set CONFIG_8xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,6 +30,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -76,11 +78,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -113,28 +116,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -233,10 +237,10 @@ CONFIG_BINFMT_ELF=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -254,6 +258,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -340,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -369,6 +375,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -376,7 +383,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -467,6 +473,8 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FEC=y @@ -476,10 +484,7 @@ CONFIG_NETDEV_1000=y # CONFIG_GIANFAR is not set # CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -520,6 +525,7 @@ CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -530,6 +536,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set @@ -595,6 +602,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set @@ -605,9 +617,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -641,7 +651,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -705,6 +714,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -763,7 +773,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -836,6 +845,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -851,6 +861,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -871,7 +882,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -902,11 +912,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index 0e8684a3138d..5b3abb42ae30 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:58 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:16 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +89,12 @@ CONFIG_AUDIT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -131,22 +133,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -154,7 +155,9 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -253,13 +256,13 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_IOMMU_HELPER=y CONFIG_SWIOTLB=y -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -277,6 +280,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -406,6 +410,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -436,6 +441,7 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -443,7 +449,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -456,6 +461,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -549,6 +555,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -588,11 +595,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -615,6 +625,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -642,6 +653,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -718,7 +730,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -766,10 +780,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -883,6 +894,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -938,9 +950,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -974,15 +983,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1003,6 +1016,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1013,6 +1027,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1032,6 +1047,7 @@ CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1135,7 +1151,6 @@ CONFIG_SND_USB=y CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1158,6 +1173,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1210,6 +1226,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y @@ -1389,6 +1406,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1459,7 +1477,6 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1577,6 +1594,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1594,6 +1612,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1613,10 +1632,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1639,10 +1660,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1669,7 +1690,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1711,11 +1731,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index dbe8e869a827..1da3488a603d 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:59 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:17 2009 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_PPC_8xx=y # CONFIG_E200 is not set CONFIG_8xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,6 +30,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -77,11 +79,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -115,28 +118,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -241,10 +245,10 @@ CONFIG_BINFMT_ELF=y CONFIG_8XX_MINIMAL_FPEMU=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -262,6 +266,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -344,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -373,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -380,7 +387,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -393,6 +399,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -540,16 +547,15 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FEC=y CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -622,7 +628,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -683,6 +688,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -742,7 +748,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -814,6 +819,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -831,6 +837,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -847,10 +854,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -872,10 +881,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index ff96bb43c32d..b7911216af78 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:00 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:17 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -82,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -120,29 +122,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -155,6 +158,7 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -239,6 +243,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -252,6 +257,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -401,6 +407,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -408,7 +415,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -420,6 +426,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -481,7 +488,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_MTD_SBC8240 is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -664,7 +670,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -712,10 +720,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -764,6 +769,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -774,6 +780,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -855,15 +862,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -886,6 +897,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -905,7 +917,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set -# CONFIG_USB_MUSB_HDRC is not set # CONFIG_USB_GADGET_MUSB_HDRC is not set # @@ -922,6 +933,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set @@ -940,6 +952,7 @@ CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set @@ -1148,6 +1161,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1183,10 +1197,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1209,6 +1225,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1237,7 +1254,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1279,6 +1295,7 @@ CONFIG_CRYPTO_PCBC=y # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index 1293c465d7fa..ef50ce45d50b 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:01 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:18 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +86,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -131,28 +133,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -244,12 +247,12 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -267,6 +270,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -360,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -389,6 +394,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -396,7 +402,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -409,6 +414,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -633,6 +639,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -672,11 +679,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -698,6 +708,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -725,6 +736,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -823,9 +835,11 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -871,10 +885,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -977,6 +988,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1031,9 +1043,6 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1051,6 +1060,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1100,6 +1114,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1111,9 +1126,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1132,6 +1145,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1142,6 +1156,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1162,7 +1177,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1186,6 +1200,7 @@ CONFIG_HID_DRAGONRISE=y CONFIG_HID_EZKEY=y CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1239,6 +1254,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1404,6 +1420,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1463,7 +1480,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1576,6 +1592,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1593,6 +1610,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1614,7 +1632,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1645,11 +1662,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index 28384dc01003..524263158fc0 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:01 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:19 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -82,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -118,28 +120,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -243,6 +246,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -260,6 +264,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -349,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -378,6 +384,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -385,7 +392,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -398,6 +404,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -405,9 +412,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -619,6 +626,7 @@ CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -657,7 +665,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -670,6 +680,7 @@ CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=y CONFIG_MD_RAID6_PQ=y +# CONFIG_ASYNC_RAID6_TEST is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -729,10 +740,7 @@ CONFIG_R8169=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -813,6 +821,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -867,9 +876,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -887,7 +893,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -906,6 +911,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -916,6 +922,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -961,6 +968,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1141,6 +1149,7 @@ CONFIG_XFS_FS=m # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1210,7 +1219,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_EXPORTFS=m @@ -1307,6 +1315,7 @@ CONFIG_GENERIC_ATOMIC64=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1324,6 +1333,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1344,6 +1354,8 @@ CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y +CONFIG_ASYNC_PQ=y +CONFIG_ASYNC_RAID6_RECOV=y # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set From 22aecebfd9498c4779e5c5bed1d2d054bd99f7a4 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 21 Oct 2009 18:01:37 -0700 Subject: [PATCH 148/743] acpi-power-meter: Don't leak ACPI error codes to userspace If the ACPI methods return an error code, we must return -EINVAL to userspace to flag the error. Right now we pass the (positive) number right through, which causes echo to keep writing bogus values. Signed-off-by: Darrick J. Wong Acked-by: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/power_meter.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c index e6bfd77986b8..2ef7030a0c28 100644 --- a/drivers/acpi/power_meter.c +++ b/drivers/acpi/power_meter.c @@ -294,7 +294,11 @@ static int set_acpi_trip(struct acpi_power_meter_resource *resource) return -EINVAL; } - return data; + /* _PTP returns 0 on success, nonzero otherwise */ + if (data) + return -EINVAL; + + return 0; } static ssize_t set_trip(struct device *dev, struct device_attribute *devattr, From 78987bdc4e41a425ac113c2c51474f0368fe653a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 5 Nov 2009 09:22:30 -0800 Subject: [PATCH 149/743] ALSA: hda, move hp_bseries_system Function hp_bseries_system() is always used, outside of CONFIG_ boundaries/controls, so move it. sound/pci/hda/patch_sigmatel.c:5458: error: implicit declaration of function 'hp_bseries_system' Signed-off-by: Randy Dunlap Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 40 +++++++++++++++++----------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index b513eba2d2f7..8eb6508cd991 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4668,6 +4668,26 @@ static void stac92xx_unsol_event(struct hda_codec *codec, unsigned int res) } } +static int hp_bseries_system(u32 subsystem_id) +{ + switch (subsystem_id) { + case 0x103c307e: + case 0x103c307f: + case 0x103c3080: + case 0x103c3081: + case 0x103c1722: + case 0x103c1723: + case 0x103c1724: + case 0x103c1725: + case 0x103c1726: + case 0x103c1727: + case 0x103c1728: + case 0x103c1729: + return 1; + } + return 0; +} + #ifdef CONFIG_PROC_FS static void stac92hd_proc_hook(struct snd_info_buffer *buffer, struct hda_codec *codec, hda_nid_t nid) @@ -4733,26 +4753,6 @@ static int stac92xx_resume(struct hda_codec *codec) return 0; } -static int hp_bseries_system(u32 subsystem_id) -{ - switch (subsystem_id) { - case 0x103c307e: - case 0x103c307f: - case 0x103c3080: - case 0x103c3081: - case 0x103c1722: - case 0x103c1723: - case 0x103c1724: - case 0x103c1725: - case 0x103c1726: - case 0x103c1727: - case 0x103c1728: - case 0x103c1729: - return 1; - } - return 0; -} - /* * using power check for controlling mute led of HP notebooks * check for mute state only on Speakers (nid = 0x10) From d39b7dd1dcbf394a1cb897457c862dafe9a20ac5 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 5 Nov 2009 10:48:30 -0800 Subject: [PATCH 150/743] sgi-gru: decrapfiy options_write() function Not a single line of actual code in the function was really fundamentally correct. Problems ranged from lack of proper range checking, to removing the last character written (which admittedly is usually '\n'), to not accepting hex numbers even though the 'show' routine would show the data in that format. This tries to do better. Acked-by: Michael Buesch Tested-and-acked-by: Jack Steiner Cc: stable@kernel.org Cc: Jiri Kosina Cc: Michael Gilbert Signed-off-by: Linus Torvalds --- drivers/misc/sgi-gru/gruprocfs.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/misc/sgi-gru/gruprocfs.c b/drivers/misc/sgi-gru/gruprocfs.c index ccd4408a26c7..3f2375c5ba5b 100644 --- a/drivers/misc/sgi-gru/gruprocfs.c +++ b/drivers/misc/sgi-gru/gruprocfs.c @@ -161,14 +161,15 @@ static int options_show(struct seq_file *s, void *p) static ssize_t options_write(struct file *file, const char __user *userbuf, size_t count, loff_t *data) { - unsigned long val; - char buf[80]; + char buf[20]; - if (strncpy_from_user(buf, userbuf, sizeof(buf) - 1) < 0) + if (count >= sizeof(buf)) + return -EINVAL; + if (copy_from_user(buf, userbuf, count)) return -EFAULT; - buf[count - 1] = '\0'; - if (!strict_strtoul(buf, 10, &val)) - gru_options = val; + buf[count] = '\0'; + if (strict_strtoul(buf, 0, &gru_options)) + return -EINVAL; return count; } From d525753bf30fe29a2897273e180fc24723350dcc Mon Sep 17 00:00:00 2001 From: Jean-Christop PLAGNIOL-VILLARD Date: Mon, 2 Nov 2009 20:13:32 +0100 Subject: [PATCH 151/743] ARM: 5779/1: ep93xx/micro9.c: fix implicit declaration of function __raw_readl and IOMEM Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: H Hartley Sweeten Signed-off-by: Russell King --- arch/arm/mach-ep93xx/micro9.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index d83b80478b09..f3757a1c5a10 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -15,6 +15,7 @@ #include #include #include +#include #include From c742239866250a5690485ab775b942c85c6bee63 Mon Sep 17 00:00:00 2001 From: zeal Date: Tue, 3 Nov 2009 02:36:55 +0100 Subject: [PATCH 152/743] ARM: 5780/1: KS8695: Fix macro definition bug in regs-switch.c NOTE: 1. Macro style is so strange. 2. The value 0xc0 is not match with KS8695 manual. It should be 0x0c. Signed-off-by: zeal Acked-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-ks8695/include/mach/regs-switch.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-ks8695/include/mach/regs-switch.h b/arch/arm/mach-ks8695/include/mach/regs-switch.h index 56d12e8de895..97e8acb1cf6c 100644 --- a/arch/arm/mach-ks8695/include/mach/regs-switch.h +++ b/arch/arm/mach-ks8695/include/mach/regs-switch.h @@ -25,7 +25,7 @@ #define KS8695_SEC1 (0x04) /* Switch Engine Control 1 */ #define KS8695_SEC2 (0x08) /* Switch Engine Control 2 */ -#define KS8695_P(x)_C(z) (0xc0 + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */ +#define KS8695_SEPXCZ(x,z) (0x0c + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */ #define KS8695_SEP12AN (0x48) /* Port 1 & 2 Auto-Negotiation */ #define KS8695_SEP34AN (0x4c) /* Port 3 & 4 Auto-Negotiation */ From 2c75910f1aa042be1dd769378d2611bf551721ac Mon Sep 17 00:00:00 2001 From: Chris Lalancette Date: Thu, 5 Nov 2009 11:47:08 +0100 Subject: [PATCH 153/743] x86: Make sure get_user_desc() doesn't sign extend. The current implementation of get_user_desc() sign extends the return value because of integer promotion rules. For the most part, this doesn't matter, because the top bit of base2 is usually 0. If, however, that bit is 1, then the entire value will be 0xffff... which is probably not what the caller intended. This patch casts the entire thing to unsigned before returning, which generates almost the same assembly as the current code but replaces the final "cltq" (sign extend) with a "mov %eax %eax" (zero-extend). This fixes booting certain guests under KVM. Signed-off-by: Chris Lalancette Signed-off-by: Linus Torvalds --- arch/x86/include/asm/desc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h index e8de2f6f5ca5..617bd56b3070 100644 --- a/arch/x86/include/asm/desc.h +++ b/arch/x86/include/asm/desc.h @@ -288,7 +288,7 @@ static inline void load_LDT(mm_context_t *pc) static inline unsigned long get_desc_base(const struct desc_struct *desc) { - return desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24); + return (unsigned)(desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24)); } static inline void set_desc_base(struct desc_struct *desc, unsigned long base) From ba86bf8bfc1add5f515db8cf1d6042bb9396a299 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 20 Oct 2009 16:29:16 +0000 Subject: [PATCH 154/743] drm/i915: Avoid potential sleep whilst holding spinlock Miles Lane reported the following error: 2 locks held by cat/4179: #0: (&p->lock){+.+.+.}, at: [] seq_read+0x25/0x315 #1: (&dev_priv->mm.active_list_lock){+.+...}, at: [] i915_batchbuffer_info+0x2b/0x124 Pid: 4179, comm: cat Not tainted 2.6.32-rc5-git1 #2 Call Trace: [] ? __debug_show_held_locks+0x1e/0x20 [] __might_sleep+0xf0/0xf7 [] kmap+0x17/0x58 [] i915_batchbuffer_info+0xad/0x124 [] seq_read+0x160/0x315 [] ? rw_verify_area+0x98/0xbb [] ? seq_read+0x0/0x315 [] vfs_read+0x75/0xa9 [] sys_read+0x3b/0x5d [] sysenter_do_call+0x12/0x36 The fix is relatively simple, use the atomic variants of kmap() that avoid the potential sleep. Signed-off-by: Chris Wilson Cc: Miles Lane Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index f8ce9a3a420d..26bf0552b3cb 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -267,10 +267,10 @@ static void i915_dump_pages(struct seq_file *m, struct page **pages, int page_co uint32_t *mem; for (page = 0; page < page_count; page++) { - mem = kmap(pages[page]); + mem = kmap_atomic(pages[page], KM_USER0); for (i = 0; i < PAGE_SIZE; i += 4) seq_printf(m, "%08x : %08x\n", i, mem[i / 4]); - kunmap(pages[page]); + kunmap_atomic(pages[page], KM_USER0); } } From 941b10fab2cbd90ac7ad6bc2338ffe30e1d3ce53 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Thu, 5 Nov 2009 16:51:40 -0500 Subject: [PATCH 155/743] ACPI: add __cpuinit to acpi_processor_add() Annote acpi_processor_add with cpuinit since it calls a cpuinit function acpi_processor_power_init and fixes a section mismatch warning. We were warned by the following warning: LD drivers/acpi/processor.o WARNING: drivers/acpi/processor.o(.text+0x1829): Section mismatch in reference from the function acpi_processor_add() to the function .cpuinit.text:acpi_processor_power_init() The function acpi_processor_add() references the function __cpuinit acpi_processor_power_init(). This is often because acpi_processor_add lacks a __cpuinit annotation or the annotation of acpi_processor_power_init is wrong. Signed-off-by: Rakib Mullick Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index c567b46dfa0f..ec742a4e5635 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -770,7 +770,7 @@ static struct notifier_block acpi_cpu_notifier = .notifier_call = acpi_cpu_soft_notify, }; -static int acpi_processor_add(struct acpi_device *device) +static int __cpuinit acpi_processor_add(struct acpi_device *device) { struct acpi_processor *pr = NULL; int result = 0; From 4bfe6b6876a036d26a960320f1ab0bbd752c19bf Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 2 Nov 2009 07:52:29 +0000 Subject: [PATCH 156/743] drm/i915: Fix and cleanup DPLL calculation for Ironlake When the ideal error range can't be reached, this will safely use a most closed one. Clean up some dumb codes in DPLL function too. This fixes DPLL clock issue against one monitor at 1680x1050@60hz. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3ba6546b7c7f..099f420de57a 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -863,10 +863,8 @@ intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; intel_clock_t clock; - int max_n; - bool found; int err_most = 47; - found = false; + int err_min = 10000; /* eDP has only 2 clock choice, no n/m/p setting */ if (HAS_eDP) @@ -890,10 +888,9 @@ intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, } memset(best_clock, 0, sizeof(*best_clock)); - max_n = limit->n.max; for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) { /* based on hardware requriment prefer smaller n to precision */ - for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) { + for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) { /* based on hardware requirment prefere larger m1,m2 */ for (clock.m1 = limit->m1.max; clock.m1 >= limit->m1.min; clock.m1--) { @@ -907,18 +904,18 @@ intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, this_err = abs((10000 - (target*10000/clock.dot))); if (this_err < err_most) { *best_clock = clock; - err_most = this_err; - max_n = clock.n; - found = true; /* found on first matching */ goto out; + } else if (this_err < err_min) { + *best_clock = clock; + err_min = this_err; } } } } } out: - return found; + return true; } /* DisplayPort has only two frequencies, 162MHz and 270MHz */ From d410ee5109a1633a686a5663c6743a92e1181f9b Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Thu, 22 Oct 2009 09:11:11 +0800 Subject: [PATCH 157/743] ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine." Ensure that memory mappings created for operation regions do not cross page boundaries. Crossing a page boundary while mapping regions can cause warnings if the pages have different attributes. Such regions are probably BIOS bugs, and this is the workaround. http://bugzilla.kernel.org/show_bug.cgi?id=14445 [Kernel summit hacking hour] Signed-off-by: Bob Moore Acked-by: Suresh Siddha Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/acconfig.h | 4 ++-- drivers/acpi/acpica/exregion.c | 35 ++++++++++++++++++++++++---------- 2 files changed, 27 insertions(+), 12 deletions(-) diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h index 8e679ef5b231..a4471e3d3853 100644 --- a/drivers/acpi/acpica/acconfig.h +++ b/drivers/acpi/acpica/acconfig.h @@ -103,9 +103,9 @@ #define ACPI_MAX_REFERENCE_COUNT 0x1000 -/* Size of cached memory mapping for system memory operation region */ +/* Default page size for use in mapping memory for operation regions */ -#define ACPI_SYSMEM_REGION_WINDOW_SIZE 4096 +#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */ /* owner_id tracking. 8 entries allows for 255 owner_ids */ diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c index 3a54b737d2da..2bd83ac57c3a 100644 --- a/drivers/acpi/acpica/exregion.c +++ b/drivers/acpi/acpica/exregion.c @@ -77,7 +77,8 @@ acpi_ex_system_memory_space_handler(u32 function, void *logical_addr_ptr = NULL; struct acpi_mem_space_context *mem_info = region_context; u32 length; - acpi_size window_size; + acpi_size map_length; + acpi_size page_boundary_map_length; #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED u32 remainder; #endif @@ -144,25 +145,39 @@ acpi_ex_system_memory_space_handler(u32 function, } /* - * Don't attempt to map memory beyond the end of the region, and - * constrain the maximum mapping size to something reasonable. + * Attempt to map from the requested address to the end of the region. + * However, we will never map more than one page, nor will we cross + * a page boundary. */ - window_size = (acpi_size) + map_length = (acpi_size) ((mem_info->address + mem_info->length) - address); - if (window_size > ACPI_SYSMEM_REGION_WINDOW_SIZE) { - window_size = ACPI_SYSMEM_REGION_WINDOW_SIZE; + /* + * If mapping the entire remaining portion of the region will cross + * a page boundary, just map up to the page boundary, do not cross. + * On some systems, crossing a page boundary while mapping regions + * can cause warnings if the pages have different attributes + * due to resource management + */ + page_boundary_map_length = + ACPI_ROUND_UP(address, ACPI_DEFAULT_PAGE_SIZE) - address; + + if (!page_boundary_map_length) { + page_boundary_map_length = ACPI_DEFAULT_PAGE_SIZE; + } + + if (map_length > page_boundary_map_length) { + map_length = page_boundary_map_length; } /* Create a new mapping starting at the address given */ - mem_info->mapped_logical_address = - acpi_os_map_memory((acpi_physical_address) address, window_size); + mem_info->mapped_logical_address = acpi_os_map_memory((acpi_physical_address) address, map_length); if (!mem_info->mapped_logical_address) { ACPI_ERROR((AE_INFO, "Could not map memory at %8.8X%8.8X, size %X", ACPI_FORMAT_NATIVE_UINT(address), - (u32) window_size)); + (u32) map_length)); mem_info->mapped_length = 0; return_ACPI_STATUS(AE_NO_MEMORY); } @@ -170,7 +185,7 @@ acpi_ex_system_memory_space_handler(u32 function, /* Save the physical address and mapping size */ mem_info->mapped_physical_address = address; - mem_info->mapped_length = window_size; + mem_info->mapped_length = map_length; } /* From d8a2d0e00c0d5a0d55e14b884bff034205015e51 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 2 Nov 2009 07:52:30 +0000 Subject: [PATCH 158/743] drm/i915: HDMI hardware workaround for Ironlake This brings some hardware workaround for HDMI port on PCH (Ibex Peak), which fixes unstable issues like during rotation. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_hdmi.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 663ab6de0b58..c33451aec1bd 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -77,14 +77,32 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode) struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv; u32 temp; - if (mode != DRM_MODE_DPMS_ON) { - temp = I915_READ(hdmi_priv->sdvox_reg); + temp = I915_READ(hdmi_priv->sdvox_reg); + + /* HW workaround, need to toggle enable bit off and on for 12bpc, but + * we do this anyway which shows more stable in testing. + */ + if (IS_IGDNG(dev)) { I915_WRITE(hdmi_priv->sdvox_reg, temp & ~SDVO_ENABLE); - } else { - temp = I915_READ(hdmi_priv->sdvox_reg); - I915_WRITE(hdmi_priv->sdvox_reg, temp | SDVO_ENABLE); + POSTING_READ(hdmi_priv->sdvox_reg); } + + if (mode != DRM_MODE_DPMS_ON) { + temp &= ~SDVO_ENABLE; + } else { + temp |= SDVO_ENABLE; + } + + I915_WRITE(hdmi_priv->sdvox_reg, temp); POSTING_READ(hdmi_priv->sdvox_reg); + + /* HW workaround, need to write this twice for issue that may result + * in first write getting masked. + */ + if (IS_IGDNG(dev)) { + I915_WRITE(hdmi_priv->sdvox_reg, temp); + POSTING_READ(hdmi_priv->sdvox_reg); + } } static void intel_hdmi_save(struct drm_connector *connector) From 5cfa245b0b63c3d79568e78a1ee3d00654d5517d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 17 Oct 2009 08:34:39 +0200 Subject: [PATCH 159/743] ACPI: Move dereference after NULL test If the NULL test on pr is needed, then the dereference should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // Signed-off-by: Julia Lawall Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 4c6c14c1e307..1c5d7a8b2fdf 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -1133,15 +1133,15 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr) int result = 0; struct acpi_processor_throttling *pthrottling; + if (!pr) + return -EINVAL; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n", pr->throttling.address, pr->throttling.duty_offset, pr->throttling.duty_width)); - if (!pr) - return -EINVAL; - /* * Evaluate _PTC, _TSS and _TPC * They must all be present or none of them can be used. From 625120a42bd4371da98808a4ca3e7589083a06d8 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 16 Oct 2009 12:46:02 +0300 Subject: [PATCH 160/743] acpi: thermal: Add EOL to the trip_point_N_type strings Make the trip_point_N_type sysfs files return a string ending in EOL for consistency with other sysfs files. Signed-off-by: Amit Kucheria Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/thermal/thermal_sys.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 4e83c297ec9e..6f8d8f971212 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -180,15 +180,15 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr, switch (type) { case THERMAL_TRIP_CRITICAL: - return sprintf(buf, "critical"); + return sprintf(buf, "critical\n"); case THERMAL_TRIP_HOT: - return sprintf(buf, "hot"); + return sprintf(buf, "hot\n"); case THERMAL_TRIP_PASSIVE: - return sprintf(buf, "passive"); + return sprintf(buf, "passive\n"); case THERMAL_TRIP_ACTIVE: - return sprintf(buf, "active"); + return sprintf(buf, "active\n"); default: - return sprintf(buf, "unknown"); + return sprintf(buf, "unknown\n"); } } From 38bb0849a6799e05bb474a88f198522ae4ecace2 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Mon, 26 Oct 2009 08:38:59 +0100 Subject: [PATCH 161/743] thermal: sysfs-api.txt - reformat for improved readability The document currently uses large indentations which make the text too wide for easy readability. Also improve general consistency. Signed-off-by: Frans Pop Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- Documentation/thermal/sysfs-api.txt | 354 ++++++++++++++-------------- 1 file changed, 179 insertions(+), 175 deletions(-) diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 70d68ce8640a..895337f8c6ba 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -1,5 +1,5 @@ Generic Thermal Sysfs driver How To -========================= +=================================== Written by Sujith Thomas , Zhang Rui @@ -10,20 +10,20 @@ Copyright (c) 2008 Intel Corporation 0. Introduction -The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors) -and thermal cooling devices (fan, processor...) to register with the thermal management -solution and to be a part of it. +The generic thermal sysfs provides a set of interfaces for thermal zone +devices (sensors) and thermal cooling devices (fan, processor...) to register +with the thermal management solution and to be a part of it. -This how-to focuses on enabling new thermal zone and cooling devices to participate -in thermal management. -This solution is platform independent and any type of thermal zone devices and -cooling devices should be able to make use of the infrastructure. +This how-to focuses on enabling new thermal zone and cooling devices to +participate in thermal management. +This solution is platform independent and any type of thermal zone devices +and cooling devices should be able to make use of the infrastructure. -The main task of the thermal sysfs driver is to expose thermal zone attributes as well -as cooling device attributes to the user space. -An intelligent thermal management application can make decisions based on inputs -from thermal zone attributes (the current temperature and trip point temperature) -and throttle appropriate devices. +The main task of the thermal sysfs driver is to expose thermal zone attributes +as well as cooling device attributes to the user space. +An intelligent thermal management application can make decisions based on +inputs from thermal zone attributes (the current temperature and trip point +temperature) and throttle appropriate devices. [0-*] denotes any positive number starting from 0 [1-*] denotes any positive number starting from 1 @@ -31,77 +31,77 @@ and throttle appropriate devices. 1. thermal sysfs driver interface functions 1.1 thermal zone device interface -1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips, - void *devdata, struct thermal_zone_device_ops *ops) +1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, + int trips, void *devdata, struct thermal_zone_device_ops *ops) - This interface function adds a new thermal zone device (sensor) to - /sys/class/thermal folder as thermal_zone[0-*]. - It tries to bind all the thermal cooling devices registered at the same time. + This interface function adds a new thermal zone device (sensor) to + /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the + thermal cooling devices registered at the same time. - name: the thermal zone name. - trips: the total number of trip points this thermal zone supports. - devdata: device private data - ops: thermal zone device call-backs. - .bind: bind the thermal zone device with a thermal cooling device. - .unbind: unbind the thermal zone device with a thermal cooling device. - .get_temp: get the current temperature of the thermal zone. - .get_mode: get the current mode (user/kernel) of the thermal zone. - "kernel" means thermal management is done in kernel. - "user" will prevent kernel thermal driver actions upon trip points - so that user applications can take charge of thermal management. - .set_mode: set the mode (user/kernel) of the thermal zone. - .get_trip_type: get the type of certain trip point. - .get_trip_temp: get the temperature above which the certain trip point - will be fired. + name: the thermal zone name. + trips: the total number of trip points this thermal zone supports. + devdata: device private data + ops: thermal zone device call-backs. + .bind: bind the thermal zone device with a thermal cooling device. + .unbind: unbind the thermal zone device with a thermal cooling device. + .get_temp: get the current temperature of the thermal zone. + .get_mode: get the current mode (user/kernel) of the thermal zone. + - "kernel" means thermal management is done in kernel. + - "user" will prevent kernel thermal driver actions upon trip points + so that user applications can take charge of thermal management. + .set_mode: set the mode (user/kernel) of the thermal zone. + .get_trip_type: get the type of certain trip point. + .get_trip_temp: get the temperature above which the certain trip point + will be fired. 1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz) - This interface function removes the thermal zone device. - It deletes the corresponding entry form /sys/class/thermal folder and unbind all - the thermal cooling devices it uses. + This interface function removes the thermal zone device. + It deletes the corresponding entry form /sys/class/thermal folder and + unbind all the thermal cooling devices it uses. 1.2 thermal cooling device interface 1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name, - void *devdata, struct thermal_cooling_device_ops *) + void *devdata, struct thermal_cooling_device_ops *) - This interface function adds a new thermal cooling device (fan/processor/...) to - /sys/class/thermal/ folder as cooling_device[0-*]. - It tries to bind itself to all the thermal zone devices register at the same time. - name: the cooling device name. - devdata: device private data. - ops: thermal cooling devices call-backs. - .get_max_state: get the Maximum throttle state of the cooling device. - .get_cur_state: get the Current throttle state of the cooling device. - .set_cur_state: set the Current throttle state of the cooling device. + This interface function adds a new thermal cooling device (fan/processor/...) + to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself + to all the thermal zone devices register at the same time. + name: the cooling device name. + devdata: device private data. + ops: thermal cooling devices call-backs. + .get_max_state: get the Maximum throttle state of the cooling device. + .get_cur_state: get the Current throttle state of the cooling device. + .set_cur_state: set the Current throttle state of the cooling device. 1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) - This interface function remove the thermal cooling device. - It deletes the corresponding entry form /sys/class/thermal folder and unbind - itself from all the thermal zone devices using it. + This interface function remove the thermal cooling device. + It deletes the corresponding entry form /sys/class/thermal folder and + unbind itself from all the thermal zone devices using it. 1.3 interface for binding a thermal zone device with a thermal cooling device 1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, - int trip, struct thermal_cooling_device *cdev); + int trip, struct thermal_cooling_device *cdev); - This interface function bind a thermal cooling device to the certain trip point - of a thermal zone device. - This function is usually called in the thermal zone device .bind callback. - tz: the thermal zone device - cdev: thermal cooling device - trip: indicates which trip point the cooling devices is associated with - in this thermal zone. + This interface function bind a thermal cooling device to the certain trip + point of a thermal zone device. + This function is usually called in the thermal zone device .bind callback. + tz: the thermal zone device + cdev: thermal cooling device + trip: indicates which trip point the cooling devices is associated with + in this thermal zone. 1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, - int trip, struct thermal_cooling_device *cdev); + int trip, struct thermal_cooling_device *cdev); - This interface function unbind a thermal cooling device from the certain trip point - of a thermal zone device. - This function is usually called in the thermal zone device .unbind callback. - tz: the thermal zone device - cdev: thermal cooling device - trip: indicates which trip point the cooling devices is associated with - in this thermal zone. + This interface function unbind a thermal cooling device from the certain + trip point of a thermal zone device. This function is usually called in + the thermal zone device .unbind callback. + tz: the thermal zone device + cdev: thermal cooling device + trip: indicates which trip point the cooling devices is associated with + in this thermal zone. 2. sysfs attributes structure @@ -114,153 +114,157 @@ if hwmon is compiled in or built as a module. Thermal zone device sys I/F, created once it's registered: /sys/class/thermal/thermal_zone[0-*]: - |-----type: Type of the thermal zone - |-----temp: Current temperature - |-----mode: Working mode of the thermal zone - |-----trip_point_[0-*]_temp: Trip point temperature - |-----trip_point_[0-*]_type: Trip point type + |---type: Type of the thermal zone + |---temp: Current temperature + |---mode: Working mode of the thermal zone + |---trip_point_[0-*]_temp: Trip point temperature + |---trip_point_[0-*]_type: Trip point type Thermal cooling device sys I/F, created once it's registered: /sys/class/thermal/cooling_device[0-*]: - |-----type : Type of the cooling device(processor/fan/...) - |-----max_state: Maximum cooling state of the cooling device - |-----cur_state: Current cooling state of the cooling device + |---type: Type of the cooling device(processor/fan/...) + |---max_state: Maximum cooling state of the cooling device + |---cur_state: Current cooling state of the cooling device -These two dynamic attributes are created/removed in pairs. -They represent the relationship between a thermal zone and its associated cooling device. -They are created/removed for each -thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful execution. +Then next two dynamic attributes are created/removed in pairs. They represent +the relationship between a thermal zone and its associated cooling device. +They are created/removed for each successful execution of +thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device. -/sys/class/thermal/thermal_zone[0-*] - |-----cdev[0-*]: The [0-*]th cooling device in the current thermal zone - |-----cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with +/sys/class/thermal/thermal_zone[0-*]: + |---cdev[0-*]: [0-*]th cooling device in current thermal zone + |---cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with Besides the thermal zone device sysfs I/F and cooling device sysfs I/F, -the generic thermal driver also creates a hwmon sysfs I/F for each _type_ of -thermal zone device. E.g. the generic thermal driver registers one hwmon class device -and build the associated hwmon sysfs I/F for all the registered ACPI thermal zones. +the generic thermal driver also creates a hwmon sysfs I/F for each _type_ +of thermal zone device. E.g. the generic thermal driver registers one hwmon +class device and build the associated hwmon sysfs I/F for all the registered +ACPI thermal zones. + /sys/class/hwmon/hwmon[0-*]: - |-----name: The type of the thermal zone devices. - |-----temp[1-*]_input: The current temperature of thermal zone [1-*]. - |-----temp[1-*]_critical: The critical trip point of thermal zone [1-*]. + |---name: The type of the thermal zone devices + |---temp[1-*]_input: The current temperature of thermal zone [1-*] + |---temp[1-*]_critical: The critical trip point of thermal zone [1-*] + Please read Documentation/hwmon/sysfs-interface for additional information. *************************** * Thermal zone attributes * *************************** -type Strings which represent the thermal zone type. - This is given by thermal zone driver as part of registration. - Eg: "acpitz" indicates it's an ACPI thermal device. - In order to keep it consistent with hwmon sys attribute, - this should be a short, lowercase string, - not containing spaces nor dashes. - RO - Required +type + Strings which represent the thermal zone type. + This is given by thermal zone driver as part of registration. + E.g: "acpitz" indicates it's an ACPI thermal device. + In order to keep it consistent with hwmon sys attribute; this should + be a short, lowercase string, not containing spaces nor dashes. + RO, Required -temp Current temperature as reported by thermal zone (sensor) - Unit: millidegree Celsius - RO - Required +temp + Current temperature as reported by thermal zone (sensor). + Unit: millidegree Celsius + RO, Required -mode One of the predefined values in [kernel, user] - This file gives information about the algorithm - that is currently managing the thermal zone. - It can be either default kernel based algorithm - or user space application. - RW - Optional - kernel = Thermal management in kernel thermal zone driver. - user = Preventing kernel thermal zone driver actions upon - trip points so that user application can take full - charge of the thermal management. +mode + One of the predefined values in [kernel, user]. + This file gives information about the algorithm that is currently + managing the thermal zone. It can be either default kernel based + algorithm or user space application. + kernel = Thermal management in kernel thermal zone driver. + user = Preventing kernel thermal zone driver actions upon + trip points so that user application can take full + charge of the thermal management. + RW, Optional -trip_point_[0-*]_temp The temperature above which trip point will be fired - Unit: millidegree Celsius - RO - Optional +trip_point_[0-*]_temp + The temperature above which trip point will be fired. + Unit: millidegree Celsius + RO, Optional -trip_point_[0-*]_type Strings which indicate the type of the trip point - E.g. it can be one of critical, hot, passive, - active[0-*] for ACPI thermal zone. - RO - Optional +trip_point_[0-*]_type + Strings which indicate the type of the trip point. + E.g. it can be one of critical, hot, passive, active[0-*] for ACPI + thermal zone. + RO, Optional -cdev[0-*] Sysfs link to the thermal cooling device node where the sys I/F - for cooling device throttling control represents. - RO - Optional +cdev[0-*] + Sysfs link to the thermal cooling device node where the sys I/F + for cooling device throttling control represents. + RO, Optional -cdev[0-*]_trip_point The trip point with which cdev[0-*] is associated in this thermal zone - -1 means the cooling device is not associated with any trip point. - RO - Optional +cdev[0-*]_trip_point + The trip point with which cdev[0-*] is associated in this thermal + zone; -1 means the cooling device is not associated with any trip + point. + RO, Optional -****************************** -* Cooling device attributes * -****************************** +***************************** +* Cooling device attributes * +***************************** -type String which represents the type of device - eg: For generic ACPI: this should be "Fan", - "Processor" or "LCD" - eg. For memory controller device on intel_menlow platform: - this should be "Memory controller" - RO - Required +type + String which represents the type of device, e.g: + - for generic ACPI: should be "Fan", "Processor" or "LCD" + - for memory controller device on intel_menlow platform: + should be "Memory controller". + RO, Required -max_state The maximum permissible cooling state of this cooling device. - RO - Required +max_state + The maximum permissible cooling state of this cooling device. + RO, Required -cur_state The current cooling state of this cooling device. - the value can any integer numbers between 0 and max_state, - cur_state == 0 means no cooling - cur_state == max_state means the maximum cooling. - RW - Required +cur_state + The current cooling state of this cooling device. + The value can any integer numbers between 0 and max_state: + - cur_state == 0 means no cooling + - cur_state == max_state means the maximum cooling. + RW, Required 3. A simple implementation -ACPI thermal zone may support multiple trip points like critical/hot/passive/active. -If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time, -it may register itself as a thermal_zone_device (thermal_zone1) with 4 trip points in all. -It has one processor and one fan, which are both registered as thermal_cooling_device. -If the processor is listed in _PSL method, and the fan is listed in _AL0 method, -the sys I/F structure will be built like this: +ACPI thermal zone may support multiple trip points like critical, hot, +passive, active. If an ACPI thermal zone supports critical, passive, +active[0] and active[1] at the same time, it may register itself as a +thermal_zone_device (thermal_zone1) with 4 trip points in all. +It has one processor and one fan, which are both registered as +thermal_cooling_device. + +If the processor is listed in _PSL method, and the fan is listed in _AL0 +method, the sys I/F structure will be built like this: /sys/class/thermal: |thermal_zone1: - |-----type: acpitz - |-----temp: 37000 - |-----mode: kernel - |-----trip_point_0_temp: 100000 - |-----trip_point_0_type: critical - |-----trip_point_1_temp: 80000 - |-----trip_point_1_type: passive - |-----trip_point_2_temp: 70000 - |-----trip_point_2_type: active0 - |-----trip_point_3_temp: 60000 - |-----trip_point_3_type: active1 - |-----cdev0: --->/sys/class/thermal/cooling_device0 - |-----cdev0_trip_point: 1 /* cdev0 can be used for passive */ - |-----cdev1: --->/sys/class/thermal/cooling_device3 - |-----cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/ + |---type: acpitz + |---temp: 37000 + |---mode: kernel + |---trip_point_0_temp: 100000 + |---trip_point_0_type: critical + |---trip_point_1_temp: 80000 + |---trip_point_1_type: passive + |---trip_point_2_temp: 70000 + |---trip_point_2_type: active0 + |---trip_point_3_temp: 60000 + |---trip_point_3_type: active1 + |---cdev0: --->/sys/class/thermal/cooling_device0 + |---cdev0_trip_point: 1 /* cdev0 can be used for passive */ + |---cdev1: --->/sys/class/thermal/cooling_device3 + |---cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/ |cooling_device0: - |-----type: Processor - |-----max_state: 8 - |-----cur_state: 0 + |---type: Processor + |---max_state: 8 + |---cur_state: 0 |cooling_device3: - |-----type: Fan - |-----max_state: 2 - |-----cur_state: 0 + |---type: Fan + |---max_state: 2 + |---cur_state: 0 /sys/class/hwmon: |hwmon0: - |-----name: acpitz - |-----temp1_input: 37000 - |-----temp1_crit: 100000 + |---name: acpitz + |---temp1_input: 37000 + |---temp1_crit: 100000 From 29226ed3c3b5cd0b2b0b1fb40ffeac3f796b80e9 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Mon, 26 Oct 2009 08:39:00 +0100 Subject: [PATCH 162/743] thermal: sysfs-api.txt - document passive attribute for thermal zones Signed-off-by: Frans Pop Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- Documentation/thermal/sysfs-api.txt | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 895337f8c6ba..a87dc277a5ca 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -199,6 +199,15 @@ cdev[0-*]_trip_point point. RO, Optional +passive + Attribute is only present for zones in which the passive cooling + policy is not supported by native thermal driver. Default is zero + and can be set to a temperature (in millidegrees) to enable a + passive trip point for the zone. Activation is done by polling with + an interval of 1 second. + Unit: millidegrees Celsius + RW, Optional + ***************************** * Cooling device attributes * ***************************** From ee59f2b462b0a7d2eb57ae59340d016589fa8e42 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 13:11:46 -0500 Subject: [PATCH 163/743] drm/radeon/kms/r600: fix rs880 support v2 Lots of cases were wrong or missing. v2: rebased against drm-next Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 18 ++++++++++++------ drivers/gpu/drm/radeon/r600_blit_kms.c | 2 +- drivers/gpu/drm/radeon/radeon_atombios.c | 3 ++- 3 files changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 3e5703f324bd..35360b09df31 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -858,7 +858,8 @@ void r600_gpu_init(struct radeon_device *rdev) ((rdev->family) == CHIP_RV630) || ((rdev->family) == CHIP_RV610) || ((rdev->family) == CHIP_RV620) || - ((rdev->family) == CHIP_RS780)) { + ((rdev->family) == CHIP_RS780) || + ((rdev->family) == CHIP_RS880)) { WREG32(DB_DEBUG, PREZ_MUST_WAIT_FOR_POSTZ_DONE); } else { WREG32(DB_DEBUG, 0); @@ -875,7 +876,8 @@ void r600_gpu_init(struct radeon_device *rdev) tmp = RREG32(SQ_MS_FIFO_SIZES); if (((rdev->family) == CHIP_RV610) || ((rdev->family) == CHIP_RV620) || - ((rdev->family) == CHIP_RS780)) { + ((rdev->family) == CHIP_RS780) || + ((rdev->family) == CHIP_RS880)) { tmp = (CACHE_FIFO_SIZE(0xa) | FETCH_FIFO_HIWATER(0xa) | DONE_FIFO_HIWATER(0xe0) | @@ -918,7 +920,8 @@ void r600_gpu_init(struct radeon_device *rdev) NUM_ES_STACK_ENTRIES(0)); } else if (((rdev->family) == CHIP_RV610) || ((rdev->family) == CHIP_RV620) || - ((rdev->family) == CHIP_RS780)) { + ((rdev->family) == CHIP_RS780) || + ((rdev->family) == CHIP_RS880)) { /* no vertex cache */ sq_config &= ~VC_ENABLE; @@ -975,7 +978,8 @@ void r600_gpu_init(struct radeon_device *rdev) if (((rdev->family) == CHIP_RV610) || ((rdev->family) == CHIP_RV620) || - ((rdev->family) == CHIP_RS780)) { + ((rdev->family) == CHIP_RS780) || + ((rdev->family) == CHIP_RS880)) { WREG32(VGT_CACHE_INVALIDATION, CACHE_INVALIDATION(TC_ONLY)); } else { WREG32(VGT_CACHE_INVALIDATION, CACHE_INVALIDATION(VC_AND_TC)); @@ -1001,8 +1005,9 @@ void r600_gpu_init(struct radeon_device *rdev) tmp = rdev->config.r600.max_pipes * 16; switch (rdev->family) { case CHIP_RV610: - case CHIP_RS780: case CHIP_RV620: + case CHIP_RS780: + case CHIP_RS880: tmp += 32; break; case CHIP_RV670: @@ -1043,8 +1048,9 @@ void r600_gpu_init(struct radeon_device *rdev) switch (rdev->family) { case CHIP_RV610: - case CHIP_RS780: case CHIP_RV620: + case CHIP_RS780: + case CHIP_RS880: tmp = TC_L2_SIZE(8); break; case CHIP_RV630: diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c index acae33e2ad51..dbf716e1fbf3 100644 --- a/drivers/gpu/drm/radeon/r600_blit_kms.c +++ b/drivers/gpu/drm/radeon/r600_blit_kms.c @@ -368,7 +368,7 @@ set_default_state(struct radeon_device *rdev) if ((rdev->family == CHIP_RV610) || (rdev->family == CHIP_RV620) || (rdev->family == CHIP_RS780) || - (rdev->family == CHIP_RS780) || + (rdev->family == CHIP_RS880) || (rdev->family == CHIP_RV710)) sq_config = 0; else diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 1c9a9c461762..050722492b43 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -277,7 +277,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) ATOM_DEVICE_CV_SUPPORT) continue; - if ((rdev->family == CHIP_RS780) && + /* IGP chips */ + if ((rdev->flags & RADEON_IS_IGP) && (con_obj_id == CONNECTOR_OBJECT_ID_PCIE_CONNECTOR)) { uint16_t igp_offset = 0; From 4170a6c1bc106d7fcf94f5842224ac4dac61006b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 01:16:23 -0500 Subject: [PATCH 164/743] drm/radeon/kms/atom/dce3: fix up usPixelClock calculation for Transmitter tables Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 2aa5994a29d5..355b0fbed927 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -725,10 +725,10 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action) if (ASIC_IS_DCE32(rdev)) { if (radeon_encoder->pixel_clock > 165000) { - args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock * 10 * 2) / 100); + args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); args.v2.acConfig.fDualLinkConnector = 1; } else { - args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock * 10 * 4) / 100); + args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); } if (dig->dig_block) args.v2.acConfig.ucEncoderSel = 1; @@ -754,7 +754,10 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action) } } else { args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL; - args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock) / 10); + if (radeon_encoder->pixel_clock > 165000) + args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); + else + args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); switch (radeon_encoder->encoder_id) { case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: From b75fad0682caacb16012582deecbd7d19bc2f68e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 13:16:01 -0500 Subject: [PATCH 165/743] drm/radeon/kms: store detailed connector info This will be useful for mode validation and certain atom tables. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 76 +++++++++- drivers/gpu/drm/radeon/radeon_combios.c | 162 +++++++++++++++------ drivers/gpu/drm/radeon/radeon_connectors.c | 8 +- drivers/gpu/drm/radeon/radeon_mode.h | 1 + 4 files changed, 199 insertions(+), 48 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 050722492b43..80aacded85a0 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -46,7 +46,8 @@ radeon_add_atom_connector(struct drm_device *dev, uint32_t supported_device, int connector_type, struct radeon_i2c_bus_rec *i2c_bus, - bool linkb, uint32_t igp_lane_info); + bool linkb, uint32_t igp_lane_info, + uint16_t connector_object_id); /* from radeon_legacy_encoder.c */ extern void @@ -193,6 +194,23 @@ const int supported_devices_connector_convert[] = { DRM_MODE_CONNECTOR_DisplayPort }; +const uint16_t supported_devices_connector_object_id_convert[] = { + CONNECTOR_OBJECT_ID_NONE, + CONNECTOR_OBJECT_ID_VGA, + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I, /* not all boards support DL */ + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D, /* not all boards support DL */ + CONNECTOR_OBJECT_ID_VGA, /* technically DVI-A */ + CONNECTOR_OBJECT_ID_COMPOSITE, + CONNECTOR_OBJECT_ID_SVIDEO, + CONNECTOR_OBJECT_ID_LVDS, + CONNECTOR_OBJECT_ID_9PIN_DIN, + CONNECTOR_OBJECT_ID_9PIN_DIN, + CONNECTOR_OBJECT_ID_DISPLAYPORT, + CONNECTOR_OBJECT_ID_HDMI_TYPE_A, + CONNECTOR_OBJECT_ID_HDMI_TYPE_B, + CONNECTOR_OBJECT_ID_SVIDEO +}; + const int object_connector_convert[] = { DRM_MODE_CONNECTOR_Unknown, DRM_MODE_CONNECTOR_DVII, @@ -229,7 +247,7 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) ATOM_OBJECT_HEADER *obj_header; int i, j, path_size, device_support; int connector_type; - uint16_t igp_lane_info, conn_id; + uint16_t igp_lane_info, conn_id, connector_object_id; bool linkb; struct radeon_i2c_bus_rec ddc_bus; @@ -312,6 +330,7 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) connector_type = object_connector_convert [ct]; + connector_object_id = ct; igp_lane_info = slot_config & 0xffff; } else @@ -322,6 +341,7 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) igp_lane_info = 0; connector_type = object_connector_convert[con_obj_id]; + connector_object_id = con_obj_id; } if (connector_type == DRM_MODE_CONNECTOR_Unknown) @@ -426,7 +446,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) le16_to_cpu(path-> usDeviceTag), connector_type, &ddc_bus, - linkb, igp_lane_info); + linkb, igp_lane_info, + connector_object_id); } } @@ -436,6 +457,45 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) return true; } +static uint16_t atombios_get_connector_object_id(struct drm_device *dev, + int connector_type, + uint16_t devices) +{ + struct radeon_device *rdev = dev->dev_private; + + if (rdev->flags & RADEON_IS_IGP) { + return supported_devices_connector_object_id_convert + [connector_type]; + } else if (((connector_type == DRM_MODE_CONNECTOR_DVII) || + (connector_type == DRM_MODE_CONNECTOR_DVID)) && + (devices & ATOM_DEVICE_DFP2_SUPPORT)) { + struct radeon_mode_info *mode_info = &rdev->mode_info; + struct atom_context *ctx = mode_info->atom_context; + int index = GetIndexIntoMasterTable(DATA, XTMDS_Info); + uint16_t size, data_offset; + uint8_t frev, crev; + ATOM_XTMDS_INFO *xtmds; + + atom_parse_data_header(ctx, index, &size, &frev, &crev, &data_offset); + xtmds = (ATOM_XTMDS_INFO *)(ctx->bios + data_offset); + + if (xtmds->ucSupportedLink & ATOM_XTMDS_SUPPORTED_DUALLINK) { + if (connector_type == DRM_MODE_CONNECTOR_DVII) + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I; + else + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D; + } else { + if (connector_type == DRM_MODE_CONNECTOR_DVII) + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; + else + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D; + } + } else { + return supported_devices_connector_object_id_convert + [connector_type]; + } +} + struct bios_connector { bool valid; uint16_t line_mux; @@ -594,14 +654,20 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct /* add the connectors */ for (i = 0; i < ATOM_MAX_SUPPORTED_DEVICE; i++) { - if (bios_connectors[i].valid) + if (bios_connectors[i].valid) { + uint16_t connector_object_id = + atombios_get_connector_object_id(dev, + bios_connectors[i].connector_type, + bios_connectors[i].devices); radeon_add_atom_connector(dev, bios_connectors[i].line_mux, bios_connectors[i].devices, bios_connectors[i]. connector_type, &bios_connectors[i].ddc_bus, - false, 0); + false, 0, + connector_object_id); + } } radeon_link_encoder_connector(dev); diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index a36ede002ee4..5253cbf6db1f 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -49,7 +49,8 @@ radeon_add_legacy_connector(struct drm_device *dev, uint32_t connector_id, uint32_t supported_device, int connector_type, - struct radeon_i2c_bus_rec *i2c_bus); + struct radeon_i2c_bus_rec *i2c_bus, + uint16_t connector_object_id); /* from radeon_legacy_encoder.c */ extern void @@ -1176,7 +1177,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_CRT1_SUPPORT, DRM_MODE_CONNECTOR_VGA, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); } else if (rdev->flags & RADEON_IS_MOBILITY) { /* LVDS */ ddc_i2c = combios_setup_i2c_bus(RADEON_LCD_GPIO_MASK); @@ -1188,7 +1190,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, DRM_MODE_CONNECTOR_LVDS, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* VGA - primary dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); @@ -1200,7 +1203,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT1_SUPPORT, DRM_MODE_CONNECTOR_VGA, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); } else { /* DVI-I - tv dac, int tmds */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC); @@ -1218,7 +1222,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT, DRM_MODE_CONNECTOR_DVII, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); /* VGA - primary dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); @@ -1230,7 +1235,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT1_SUPPORT, DRM_MODE_CONNECTOR_VGA, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); } if (rdev->family != CHIP_R100 && rdev->family != CHIP_R200) { @@ -1243,7 +1249,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); } break; case CT_IBOOK: @@ -1257,7 +1264,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_LCD1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, - DRM_MODE_CONNECTOR_LVDS, &ddc_i2c); + DRM_MODE_CONNECTOR_LVDS, &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* VGA - TV DAC */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); radeon_add_legacy_encoder(dev, @@ -1266,7 +1274,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 2), ATOM_DEVICE_CRT2_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1275,7 +1284,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_POWERBOOK_EXTERNAL: DRM_INFO("Connector Table: %d (powerbook external tmds)\n", @@ -1288,7 +1298,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_LCD1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, - DRM_MODE_CONNECTOR_LVDS, &ddc_i2c); + DRM_MODE_CONNECTOR_LVDS, &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* DVI-I - primary dac, ext tmds */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); radeon_add_legacy_encoder(dev, @@ -1301,10 +1312,12 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_CRT1_SUPPORT, 1), ATOM_DEVICE_CRT1_SUPPORT); + /* XXX some are SL */ radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_DFP2_SUPPORT | ATOM_DEVICE_CRT1_SUPPORT, - DRM_MODE_CONNECTOR_DVII, &ddc_i2c); + DRM_MODE_CONNECTOR_DVII, &ddc_i2c, + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1313,7 +1326,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_POWERBOOK_INTERNAL: DRM_INFO("Connector Table: %d (powerbook internal tmds)\n", @@ -1326,7 +1340,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_LCD1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, - DRM_MODE_CONNECTOR_LVDS, &ddc_i2c); + DRM_MODE_CONNECTOR_LVDS, &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* DVI-I - primary dac, int tmds */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); radeon_add_legacy_encoder(dev, @@ -1342,7 +1357,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_CRT1_SUPPORT, - DRM_MODE_CONNECTOR_DVII, &ddc_i2c); + DRM_MODE_CONNECTOR_DVII, &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1351,7 +1367,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_POWERBOOK_VGA: DRM_INFO("Connector Table: %d (powerbook vga)\n", @@ -1364,7 +1381,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_LCD1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, - DRM_MODE_CONNECTOR_LVDS, &ddc_i2c); + DRM_MODE_CONNECTOR_LVDS, &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* VGA - primary dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); radeon_add_legacy_encoder(dev, @@ -1373,7 +1391,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 1), ATOM_DEVICE_CRT1_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT1_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1382,7 +1401,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_MINI_EXTERNAL: DRM_INFO("Connector Table: %d (mini external tmds)\n", @@ -1399,10 +1419,12 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_CRT2_SUPPORT, 2), ATOM_DEVICE_CRT2_SUPPORT); + /* XXX are any DL? */ radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_DFP2_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_DVII, &ddc_i2c); + DRM_MODE_CONNECTOR_DVII, &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1411,7 +1433,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_MINI_INTERNAL: DRM_INFO("Connector Table: %d (mini internal tmds)\n", @@ -1431,7 +1454,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_DVII, &ddc_i2c); + DRM_MODE_CONNECTOR_DVII, &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1440,7 +1464,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_IMAC_G5_ISIGHT: DRM_INFO("Connector Table: %d (imac g5 isight)\n", @@ -1453,7 +1478,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_DFP1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_DFP1_SUPPORT, - DRM_MODE_CONNECTOR_DVID, &ddc_i2c); + DRM_MODE_CONNECTOR_DVID, &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D); /* VGA - tv dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC); radeon_add_legacy_encoder(dev, @@ -1462,7 +1488,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 2), ATOM_DEVICE_CRT2_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1471,7 +1498,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_EMAC: DRM_INFO("Connector Table: %d (emac)\n", @@ -1484,7 +1512,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 1), ATOM_DEVICE_CRT1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_CRT1_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* VGA - tv dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_CRT2_DDC); radeon_add_legacy_encoder(dev, @@ -1493,7 +1522,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 2), ATOM_DEVICE_CRT2_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1502,7 +1532,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; default: DRM_INFO("Connector table: %d (invalid)\n", @@ -1596,11 +1627,46 @@ static bool radeon_apply_legacy_tv_quirks(struct drm_device *dev) return true; } +static uint16_t combios_check_dl_dvi(struct drm_device *dev, int is_dvi_d) +{ + struct radeon_device *rdev = dev->dev_private; + uint32_t ext_tmds_info; + + if (rdev->flags & RADEON_IS_IGP) { + if (is_dvi_d) + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D; + else + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; + } + ext_tmds_info = combios_get_table_offset(dev, COMBIOS_EXT_TMDS_INFO_TABLE); + if (ext_tmds_info) { + uint8_t rev = RBIOS8(ext_tmds_info); + uint8_t flags = RBIOS8(ext_tmds_info + 4 + 5); + if (rev >= 3) { + if (is_dvi_d) + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D; + else + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I; + } else { + if (flags & 1) { + if (is_dvi_d) + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D; + else + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I; + } + } + } + if (is_dvi_d) + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D; + else + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; +} + bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) { struct radeon_device *rdev = dev->dev_private; uint32_t conn_info, entry, devices; - uint16_t tmp; + uint16_t tmp, connector_object_id; enum radeon_combios_ddc ddc_type; enum radeon_combios_connector connector; int i = 0; @@ -1660,7 +1726,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) radeon_add_legacy_connector(dev, i, devices, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D); break; case CONNECTOR_CRT_LEGACY: if (tmp & 0x1) { @@ -1685,7 +1752,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) devices, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); break; case CONNECTOR_DVI_I_LEGACY: devices = 0; @@ -1714,6 +1782,7 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) ATOM_DEVICE_DFP2_SUPPORT, 0), ATOM_DEVICE_DFP2_SUPPORT); + connector_object_id = combios_check_dl_dvi(dev, 0); } else { devices |= ATOM_DEVICE_DFP1_SUPPORT; radeon_add_legacy_encoder(dev, @@ -1722,19 +1791,24 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) ATOM_DEVICE_DFP1_SUPPORT, 0), ATOM_DEVICE_DFP1_SUPPORT); + connector_object_id = CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; } radeon_add_legacy_connector(dev, i, devices, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + connector_object_id); break; case CONNECTOR_DVI_D_LEGACY: - if ((tmp >> 4) & 0x1) + if ((tmp >> 4) & 0x1) { devices = ATOM_DEVICE_DFP2_SUPPORT; - else + connector_object_id = combios_check_dl_dvi(dev, 1); + } else { devices = ATOM_DEVICE_DFP1_SUPPORT; + connector_object_id = CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; + } radeon_add_legacy_encoder(dev, radeon_get_encoder_id (dev, devices, 0), @@ -1742,7 +1816,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) radeon_add_legacy_connector(dev, i, devices, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + connector_object_id); break; case CONNECTOR_CTV_LEGACY: case CONNECTOR_STV_LEGACY: @@ -1756,7 +1831,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; default: DRM_ERROR("Unknown connector type: %d\n", @@ -1788,7 +1864,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_DFP1_SUPPORT, DRM_MODE_CONNECTOR_DVII, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); } else { uint16_t crt_info = combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE); @@ -1804,7 +1881,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) 0, ATOM_DEVICE_CRT1_SUPPORT, DRM_MODE_CONNECTOR_VGA, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); } else { DRM_DEBUG("No connector info found\n"); return false; @@ -1903,7 +1981,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) 5, ATOM_DEVICE_LCD1_SUPPORT, DRM_MODE_CONNECTOR_LVDS, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); } } @@ -1923,7 +2002,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) radeon_add_legacy_connector(dev, 6, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); } } } diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index ce3a785a633b..fb4d9184704a 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -823,7 +823,8 @@ radeon_add_atom_connector(struct drm_device *dev, int connector_type, struct radeon_i2c_bus_rec *i2c_bus, bool linkb, - uint32_t igp_lane_info) + uint32_t igp_lane_info, + uint16_t connector_object_id) { struct radeon_device *rdev = dev->dev_private; struct drm_connector *connector; @@ -862,6 +863,7 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_connector->connector_id = connector_id; radeon_connector->devices = supported_device; radeon_connector->shared_ddc = shared_ddc; + radeon_connector->connector_object_id = connector_object_id; switch (connector_type) { case DRM_MODE_CONNECTOR_VGA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); @@ -1013,7 +1015,8 @@ radeon_add_legacy_connector(struct drm_device *dev, uint32_t connector_id, uint32_t supported_device, int connector_type, - struct radeon_i2c_bus_rec *i2c_bus) + struct radeon_i2c_bus_rec *i2c_bus, + uint16_t connector_object_id) { struct radeon_device *rdev = dev->dev_private; struct drm_connector *connector; @@ -1042,6 +1045,7 @@ radeon_add_legacy_connector(struct drm_device *dev, radeon_connector->connector_id = connector_id; radeon_connector->devices = supported_device; + radeon_connector->connector_object_id = connector_object_id; switch (connector_type) { case DRM_MODE_CONNECTOR_VGA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index ccb783868ad6..ace726aa0d76 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -317,6 +317,7 @@ struct radeon_connector { struct edid *edid; void *con_priv; bool dac_load_detect; + uint16_t connector_object_id; }; struct radeon_framebuffer { From f95a9f0b05d22cffc46fbd2d065b260f8405e43f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 02:21:06 -0500 Subject: [PATCH 166/743] drm/radeon/kms/atom/dce3: call transmitter init on mode set Generally this is done at post, but might not always be done with softboot or for connectors on docking stations. Could probably be done once when the driver loads/resumes rather than on each mode set. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 355b0fbed927..d42bc512d75a 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -722,14 +722,17 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action) atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev); args.v1.ucAction = action; - + if (action == ATOM_TRANSMITTER_ACTION_INIT) { + args.v1.usInitInfo = radeon_connector->connector_object_id; + } else { + if (radeon_encoder->pixel_clock > 165000) + args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); + else + args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); + } if (ASIC_IS_DCE32(rdev)) { - if (radeon_encoder->pixel_clock > 165000) { + if (radeon_encoder->pixel_clock > 165000) args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); - args.v2.acConfig.fDualLinkConnector = 1; - } else { - args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); - } if (dig->dig_block) args.v2.acConfig.ucEncoderSel = 1; @@ -754,10 +757,6 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action) } } else { args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL; - if (radeon_encoder->pixel_clock > 165000) - args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); - else - args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); switch (radeon_encoder->encoder_id) { case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: @@ -1140,6 +1139,7 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, /* setup and enable the encoder and transmitter */ atombios_dig_encoder_setup(encoder, ATOM_ENABLE); + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_INIT); atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP); atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE); break; From a3fa6320ce964f799388b152a1b0f6e2c3b32a7f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 11:57:07 -0500 Subject: [PATCH 167/743] drm/radeon/kms: initial mode validation support Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 48 +++++++++++++++++++++- 1 file changed, 47 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index fb4d9184704a..fce4c4087fda 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -397,6 +397,30 @@ static int radeon_lvds_get_modes(struct drm_connector *connector) static int radeon_lvds_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + struct drm_encoder *encoder = radeon_best_single_encoder(connector); + + if ((mode->hdisplay < 320) || (mode->vdisplay < 240)) + return MODE_PANEL; + + if (encoder) { + struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; + + /* AVIVO hardware supports downscaling modes larger than the panel + * to the panel size, but I'm not sure this is desirable. + */ + if ((mode->hdisplay > native_mode->hdisplay) || + (mode->vdisplay > native_mode->vdisplay)) + return MODE_PANEL; + + /* if scaling is disabled, block non-native modes */ + if (radeon_encoder->rmx_type == RMX_OFF) { + if ((mode->hdisplay != native_mode->hdisplay) || + (mode->vdisplay != native_mode->vdisplay)) + return MODE_PANEL; + } + } + return MODE_OK; } @@ -512,6 +536,8 @@ static int radeon_vga_get_modes(struct drm_connector *connector) static int radeon_vga_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + /* XXX check mode bandwidth */ + /* XXX verify against max DAC output frequency */ return MODE_OK; } @@ -609,6 +635,8 @@ static int radeon_tv_get_modes(struct drm_connector *connector) static int radeon_tv_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + if ((mode->hdisplay > 1024) || (mode->vdisplay > 768)) + return MODE_CLOCK_RANGE; return MODE_OK; } @@ -801,9 +829,27 @@ static void radeon_dvi_force(struct drm_connector *connector) radeon_connector->use_digital = true; } +static int radeon_dvi_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct radeon_connector *radeon_connector = to_radeon_connector(connector); + + /* XXX check mode bandwidth */ + + if (radeon_connector->use_digital && (mode->clock > 165000)) { + if ((radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I) || + (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D) || + (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_B)) + return MODE_OK; + else + return MODE_CLOCK_HIGH; + } + return MODE_OK; +} + struct drm_connector_helper_funcs radeon_dvi_connector_helper_funcs = { .get_modes = radeon_dvi_get_modes, - .mode_valid = radeon_vga_mode_valid, + .mode_valid = radeon_dvi_mode_valid, .best_encoder = radeon_dvi_encoder, }; From 24395a85d8efe6eee477ea35c73d045a8dd7a3a1 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 6 Nov 2009 14:59:27 +1100 Subject: [PATCH 168/743] md: don't clear endpoint for resync when resync is interrupted. If a 'sync_max' has been set (via sysfs), it is wrong to clear it until a resync (or reshape or recovery ...) actually reached that point. So if a resync is interrupted (e.g. by device failure), leave 'resync_max' unchanged. This is particularly important for 'reshape' operations that do not change the size of the array. For such operations mdadm needs to monitor the reshape taking rolling backups of the section being reshaped. If resync_max gets cleared, the reshape can get ahead of mdadm and then the backups that mdadm creates are useless. This is suitable for 2.6.31.y stable kernels. Cc: stable@kernel.org Signed-off-by: NeilBrown --- drivers/md/md.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 10eb1fce975e..e64c971038d1 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6504,8 +6504,9 @@ void md_do_sync(mddev_t *mddev) skip: mddev->curr_resync = 0; mddev->curr_resync_completed = 0; - mddev->resync_min = 0; - mddev->resync_max = MaxSector; + if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) + /* We completed so max setting can be forgotten. */ + mddev->resync_max = MaxSector; sysfs_notify(&mddev->kobj, NULL, "sync_completed"); wake_up(&resync_wait); set_bit(MD_RECOVERY_DONE, &mddev->recovery); From 8dee7211467a56b7eb4e4359efb0aa4a72e1b6f3 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 6 Nov 2009 14:59:29 +1100 Subject: [PATCH 169/743] md/raid5: make sure curr_sync_completes is uptodate when reshape starts This value is visible through sysfs and is used by mdadm when it manages a reshape (backing up data that is about to be rearranged). So it is important that it is always correct. Current it does not get updated properly when a reshape starts which can cause problems when assembling an array that is in the middle of being reshaped. This is suitable for 2.6.31.y stable kernels. Cc: stable@kernel.org Signed-off-by: NeilBrown --- drivers/md/raid5.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 81abefc172d9..dcce204b6c73 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4049,6 +4049,8 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped sector_nr = conf->reshape_progress; sector_div(sector_nr, new_data_disks); if (sector_nr) { + mddev->curr_resync_completed = sector_nr; + sysfs_notify(&mddev->kobj, NULL, "sync_completed"); *skipped = 1; return sector_nr; } From 662aeced1512e008e5613b91de8e8b8e01017cb5 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 30 Sep 2009 13:02:42 -0700 Subject: [PATCH 170/743] [ARM] properly report mv78100 stepping A1 Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-mv78xx0/common.c | 2 ++ arch/arm/mach-mv78xx0/include/mach/mv78xx0.h | 1 + 2 files changed, 3 insertions(+) diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 1b22e4af8791..08465eb6a2c2 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -845,6 +845,8 @@ static char * __init mv78xx0_id(void) } else if (dev == MV78100_DEV_ID) { if (rev == MV78100_REV_A0) return "MV78100-A0"; + else if (rev == MV78100_REV_A1) + return "MV78100-A1"; else return "MV78100-Rev-Unsupported"; } else if (dev == MV78200_DEV_ID) { diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index d715b92b0908..788bdace1304 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -112,6 +112,7 @@ #define MV78100_DEV_ID 0x7810 #define MV78100_REV_A0 1 +#define MV78100_REV_A1 2 #define MV78200_DEV_ID 0x7820 #define MV78200_REV_A0 1 From 5d8965557318fabb1680d1817c2afc2714b6d3ce Mon Sep 17 00:00:00 2001 From: Simon Kagstrom Date: Fri, 9 Oct 2009 08:26:45 +0200 Subject: [PATCH 171/743] [ARM] OpenRD base: Initialize PCI express and i2c Signed-off-by: Simon Kagstrom Acked-by: Dieter Kiermaier Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/openrd_base-setup.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c index 947dfb8cd5b2..77617c722299 100644 --- a/arch/arm/mach-kirkwood/openrd_base-setup.c +++ b/arch/arm/mach-kirkwood/openrd_base-setup.c @@ -70,8 +70,20 @@ static void __init openrd_base_init(void) kirkwood_ge00_init(&openrd_base_ge00_data); kirkwood_sata_init(&openrd_base_sata_data); kirkwood_sdio_init(&openrd_base_mvsdio_data); + + kirkwood_i2c_init(); } +static int __init openrd_base_pci_init(void) +{ + if (machine_is_openrd_base()) + kirkwood_pcie_init(); + + return 0; + } +subsys_initcall(openrd_base_pci_init); + + MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") /* Maintainer: Dhaval Vasa */ .phys_io = KIRKWOOD_REGS_PHYS_BASE, From 6de95c198729d34a85c88f8844f1c3d57fb6da00 Mon Sep 17 00:00:00 2001 From: Li Jie Date: Thu, 5 Nov 2009 07:29:54 -0800 Subject: [PATCH 172/743] [ARM] kirkwood: fix section mismatch kirkwood_timer_init() and kirkwood_pcie_setup() lack of __init which causes following warnings: WARNING: vmlinux.o(.text+0x9568): Section mismatch in reference from the function kirkwood_timer_init() to the function .init.text:kirkwood_find_tclk() The function kirkwood_timer_init() references the function __init kirkwood_find_tclk(). This is often because kirkwood_timer_init lacks a __init annotation or the annotation of kirkwood_find_tclk is wrong. WARNING: vmlinux.o(.text+0x979c): Section mismatch in reference from the function kirkwood_pcie_setup() to the function .init.text:orion_pcie_setup() The function kirkwood_pcie_setup() references the function __init orion_pcie_setup(). This is often because kirkwood_pcie_setup lacks a __init annotation or the annotation of orion_pcie_setup is wrong. Signed-off-by: lijie Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/common.c | 2 +- arch/arm/mach-kirkwood/pcie.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 0acb61f3c10b..7177c4aa6342 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -845,7 +845,7 @@ int __init kirkwood_find_tclk(void) return 166666667; } -static void kirkwood_timer_init(void) +static void __init kirkwood_timer_init(void) { kirkwood_tclk = kirkwood_find_tclk(); orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index d90b9aae308d..553882033006 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -93,7 +93,7 @@ static struct pci_ops pcie_ops = { }; -static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) +static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) { struct resource *res; extern unsigned int kirkwood_clk_ctrl; From 8a1cbf64977f89e9e9bc1d80dd01503337424f96 Mon Sep 17 00:00:00 2001 From: Gustavo Maciel Dias Vieira Date: Mon, 19 Oct 2009 09:41:53 -0200 Subject: [PATCH 173/743] ACPI: add DMI entry for SCI_EN resume quirk on HP dv4 Fixes the missing battery on sleep problem for yet another HP laptop ("HP Pavilion dv4"). Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=13449 Signed-off-by: Gustavo Maciel Dias Vieira Signed-off-by: Len Brown --- drivers/acpi/sleep.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index a90afcc723ab..ed9760aa7aa2 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -413,6 +413,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { }, }, { + .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard Pavilion dv4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4"), + }, + }, + { .callback = init_old_suspend_ordering, .ident = "Panasonic CF51-2L", .matches = { From 7433874e31f7f2e6e942b12012790565731d0f4a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Tue, 3 Nov 2009 00:53:02 +0100 Subject: [PATCH 174/743] drm/radeon/kms: add debugfs for power management for AtomBIOS devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/Makefile | 2 +- drivers/gpu/drm/radeon/r420.c | 2 + drivers/gpu/drm/radeon/r520.c | 2 + drivers/gpu/drm/radeon/r600.c | 3 ++ drivers/gpu/drm/radeon/radeon.h | 8 +++ drivers/gpu/drm/radeon/radeon_asic.h | 23 +++++++++ drivers/gpu/drm/radeon/radeon_atombios.c | 18 +++++++ drivers/gpu/drm/radeon/radeon_clocks.c | 2 +- drivers/gpu/drm/radeon/radeon_pm.c | 65 ++++++++++++++++++++++++ drivers/gpu/drm/radeon/rs600.c | 2 + drivers/gpu/drm/radeon/rs690.c | 2 + drivers/gpu/drm/radeon/rv515.c | 2 + drivers/gpu/drm/radeon/rv770.c | 3 ++ 13 files changed, 132 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/radeon/radeon_pm.c diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile index 09a28923f46e..b5713eedd6e1 100644 --- a/drivers/gpu/drm/radeon/Makefile +++ b/drivers/gpu/drm/radeon/Makefile @@ -49,7 +49,7 @@ radeon-y += radeon_device.o radeon_kms.o \ radeon_cs.o radeon_bios.o radeon_benchmark.o r100.o r300.o r420.o \ rs400.o rs600.o rs690.o rv515.o r520.o r600.o rv770.o radeon_test.o \ r200.o radeon_legacy_tv.o r600_cs.o r600_blit.o r600_blit_shaders.o \ - r600_blit_kms.o + r600_blit_kms.o radeon_pm.o radeon-$(CONFIG_COMPAT) += radeon_ioc32.o diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c index 5c7fe52de30e..1cefdbcc0850 100644 --- a/drivers/gpu/drm/radeon/r420.c +++ b/drivers/gpu/drm/radeon/r420.c @@ -311,6 +311,8 @@ int r420_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ r300_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c index a555b7b19b48..f7435185c0a6 100644 --- a/drivers/gpu/drm/radeon/r520.c +++ b/drivers/gpu/drm/radeon/r520.c @@ -260,6 +260,8 @@ int r520_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ r520_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 35360b09df31..8d6bc12192d2 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1621,10 +1621,13 @@ int r600_init(struct radeon_device *rdev) r600_scratch_init(rdev); /* Initialize surface registers */ radeon_surface_init(rdev); + /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); r = radeon_clocks_init(rdev); if (r) return r; + /* Initialize power management */ + radeon_pm_init(rdev); /* Fence driver */ r = radeon_fence_driver_init(rdev); if (r) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index ea3efd7ae85b..9f0bd9847884 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -139,6 +139,10 @@ struct radeon_clock { uint32_t default_sclk; }; +/* + * Power management + */ +int radeon_pm_init(struct radeon_device *rdev); /* * Fences. @@ -622,7 +626,9 @@ struct radeon_asic { uint64_t dst_offset, unsigned num_pages, struct radeon_fence *fence); + uint32_t (*get_engine_clock)(struct radeon_device *rdev); void (*set_engine_clock)(struct radeon_device *rdev, uint32_t eng_clock); + uint32_t (*get_memory_clock)(struct radeon_device *rdev); void (*set_memory_clock)(struct radeon_device *rdev, uint32_t mem_clock); void (*set_pcie_lanes)(struct radeon_device *rdev, int lanes); void (*set_clock_gating)(struct radeon_device *rdev, int enable); @@ -953,7 +959,9 @@ static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v) #define radeon_copy_blit(rdev, s, d, np, f) (rdev)->asic->copy_blit((rdev), (s), (d), (np), (f)) #define radeon_copy_dma(rdev, s, d, np, f) (rdev)->asic->copy_dma((rdev), (s), (d), (np), (f)) #define radeon_copy(rdev, s, d, np, f) (rdev)->asic->copy((rdev), (s), (d), (np), (f)) +#define radeon_get_engine_clock(rdev) (rdev)->asic->get_engine_clock((rdev)) #define radeon_set_engine_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e)) +#define radeon_get_memory_clock(rdev) (rdev)->asic->get_memory_clock((rdev)) #define radeon_set_memory_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e)) #define radeon_set_pcie_lanes(rdev, l) (rdev)->asic->set_pcie_lanes((rdev), (l)) #define radeon_set_clock_gating(rdev, e) (rdev)->asic->set_clock_gating((rdev), (e)) diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index d38f99632827..94991edc839f 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -31,10 +31,13 @@ /* * common functions */ +uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev); void radeon_legacy_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock); void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable); +uint32_t radeon_atom_get_engine_clock(struct radeon_device *rdev); void radeon_atom_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock); +uint32_t radeon_atom_get_memory_clock(struct radeon_device *rdev); void radeon_atom_set_memory_clock(struct radeon_device *rdev, uint32_t mem_clock); void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable); @@ -93,7 +96,9 @@ static struct radeon_asic r100_asic = { .copy_blit = &r100_copy_blit, .copy_dma = NULL, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, + .get_memory_clock = NULL, .set_memory_clock = NULL, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -145,7 +150,9 @@ static struct radeon_asic r300_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, + .get_memory_clock = NULL, .set_memory_clock = NULL, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -181,7 +188,9 @@ static struct radeon_asic r420_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -222,7 +231,9 @@ static struct radeon_asic rs400_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, + .get_memory_clock = NULL, .set_memory_clock = NULL, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -267,7 +278,9 @@ static struct radeon_asic rs600_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -305,7 +318,9 @@ static struct radeon_asic rs690_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r300_copy_dma, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -349,7 +364,9 @@ static struct radeon_asic rv515_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -384,7 +401,9 @@ static struct radeon_asic r520_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -445,7 +464,9 @@ static struct radeon_asic r600_asic = { .copy_blit = &r600_copy_blit, .copy_dma = &r600_copy_blit, .copy = &r600_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -481,7 +502,9 @@ static struct radeon_asic rv770_asic = { .copy_blit = &r600_copy_blit, .copy_dma = &r600_copy_blit, .copy = &r600_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 80aacded85a0..2ed88a820935 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -1133,6 +1133,24 @@ void radeon_atom_static_pwrmgt_setup(struct radeon_device *rdev, int enable) atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } +uint32_t radeon_atom_get_engine_clock(struct radeon_device *rdev) +{ + GET_ENGINE_CLOCK_PS_ALLOCATION args; + int index = GetIndexIntoMasterTable(COMMAND, GetEngineClock); + + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + return args.ulReturnEngineClock; +} + +uint32_t radeon_atom_get_memory_clock(struct radeon_device *rdev) +{ + GET_MEMORY_CLOCK_PS_ALLOCATION args; + int index = GetIndexIntoMasterTable(COMMAND, GetMemoryClock); + + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + return args.ulReturnMemoryClock; +} + void radeon_atom_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock) { diff --git a/drivers/gpu/drm/radeon/radeon_clocks.c b/drivers/gpu/drm/radeon/radeon_clocks.c index f5c32a766b10..a81354167621 100644 --- a/drivers/gpu/drm/radeon/radeon_clocks.c +++ b/drivers/gpu/drm/radeon/radeon_clocks.c @@ -32,7 +32,7 @@ #include "atom.h" /* 10 khz */ -static uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev) +uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev) { struct radeon_pll *spll = &rdev->clock.spll; uint32_t fb_div, ref_div, post_div, sclk; diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c new file mode 100644 index 000000000000..46146c6a2a06 --- /dev/null +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -0,0 +1,65 @@ +/* + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Rafał Miłecki + */ +#include "drmP.h" +#include "radeon.h" + +int radeon_debugfs_pm_init(struct radeon_device *rdev); + +int radeon_pm_init(struct radeon_device *rdev) +{ + if (radeon_debugfs_pm_init(rdev)) { + DRM_ERROR("Failed to register debugfs file for CP !\n"); + } + + return 0; +} + +/* + * Debugfs info + */ +#if defined(CONFIG_DEBUG_FS) + +static int radeon_debugfs_pm_info(struct seq_file *m, void *data) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + struct radeon_device *rdev = dev->dev_private; + + seq_printf(m, "engine clock: %u0 Hz\n", radeon_get_engine_clock(rdev)); + seq_printf(m, "memory clock: %u0 Hz\n", radeon_get_memory_clock(rdev)); + + return 0; +} + +static struct drm_info_list radeon_pm_info_list[] = { + {"radeon_pm_info", radeon_debugfs_pm_info, 0, NULL}, +}; +#endif + +int radeon_debugfs_pm_init(struct radeon_device *rdev) +{ +#if defined(CONFIG_DEBUG_FS) + return radeon_debugfs_add_files(rdev, radeon_pm_info_list, ARRAY_SIZE(radeon_pm_info_list)); +#else + return 0; +#endif +} diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 942754c39be9..5f117cd8736a 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -488,6 +488,8 @@ int rs600_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ rs600_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index 025e3225346c..27547175cf93 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -706,6 +706,8 @@ int rs690_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ rs690_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 03c052d892c0..7935f793bf62 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -587,6 +587,8 @@ int rv515_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ rv515_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index ae074fdf804d..b0efd0ddae7a 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -983,10 +983,13 @@ int rv770_init(struct radeon_device *rdev) r600_scratch_init(rdev); /* Initialize surface registers */ radeon_surface_init(rdev); + /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); r = radeon_clocks_init(rdev); if (r) return r; + /* Initialize power management */ + radeon_pm_init(rdev); /* Fence driver */ r = radeon_fence_driver_init(rdev); if (r) From 2839d396e3ae0891c1fdd87aa1cea218e6f5c4df Mon Sep 17 00:00:00 2001 From: Vaibhav Verma Date: Thu, 5 Nov 2009 23:13:36 -0500 Subject: [PATCH 175/743] ACPI: sleep: another HP/Compaq DMI entries for init_set_sci_en_on_resume http://bugzilla.kernel.org/show_bug.cgi?id=13745 Signed-off-by: Len Brown --- drivers/acpi/sleep.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index ed9760aa7aa2..4cc1b8116e76 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -421,6 +421,22 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { }, }, { + .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard Pavilion dv7", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard Compaq Presario CQ40 Notebook PC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario CQ40 Notebook PC"), + }, + }, + { .callback = init_old_suspend_ordering, .ident = "Panasonic CF51-2L", .matches = { From 4eb0c00b6221f28b8988df37c9cb1bc5a2b91b39 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 5 Nov 2009 20:24:33 -0800 Subject: [PATCH 176/743] sparc64: Add a comment about why we only use certain memory barriers these days. Based upon feedback from Mathieu Desnoyers. Signed-off-by: David S. Miller --- arch/sparc/include/asm/system_64.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/sparc/include/asm/system_64.h b/arch/sparc/include/asm/system_64.h index 25e848f0cad7..d47a98e66972 100644 --- a/arch/sparc/include/asm/system_64.h +++ b/arch/sparc/include/asm/system_64.h @@ -63,6 +63,10 @@ do { __asm__ __volatile__("ba,pt %%xcc, 1f\n\t" \ : : : "memory"); \ } while (0) +/* The kernel always executes in TSO memory model these days, + * and furthermore most sparc64 chips implement more stringent + * memory ordering than required by the specifications. + */ #define mb() membar_safe("#StoreLoad") #define rmb() __asm__ __volatile__("":::"memory") #define wmb() __asm__ __volatile__("":::"memory") From 1056bd51674e529813213186471bb4ac6689a755 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 5 Nov 2009 20:46:52 -0800 Subject: [PATCH 177/743] bridge: prevent bridging wrong device The bridge code assumes ethernet addressing, so be more strict in the what is allowed. This showed up when GRE had a bug and was not using correct address format. Add some more comments for increased clarity. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/bridge/br_if.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index b1b3b0fbf41c..4a9f52732655 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -377,12 +377,16 @@ int br_add_if(struct net_bridge *br, struct net_device *dev) struct net_bridge_port *p; int err = 0; - if (dev->flags & IFF_LOOPBACK || dev->type != ARPHRD_ETHER) + /* Don't allow bridging non-ethernet like devices */ + if ((dev->flags & IFF_LOOPBACK) || + dev->type != ARPHRD_ETHER || dev->addr_len != ETH_ALEN) return -EINVAL; + /* No bridging of bridges */ if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit) return -ELOOP; + /* Device is already being bridged */ if (dev->br_port != NULL) return -EBUSY; From b4ec824021493ba6cb7eeb61572f4d2f8a80a52e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 5 Nov 2009 20:56:07 -0800 Subject: [PATCH 178/743] rose: device refcount leak While hunting dev_put() for net-next-2.6, I found a device refcount leak in ROSE, ioctl(SIOCADDRT) error path. Fix is to not touch device refcount, as we hold RTNL Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/rose/rose_route.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c index 9478d9b3d977..f3e21989b88c 100644 --- a/net/rose/rose_route.c +++ b/net/rose/rose_route.c @@ -578,18 +578,18 @@ static int rose_clear_routes(void) /* * Check that the device given is a valid AX.25 interface that is "up". + * called whith RTNL */ -static struct net_device *rose_ax25_dev_get(char *devname) +static struct net_device *rose_ax25_dev_find(char *devname) { struct net_device *dev; - if ((dev = dev_get_by_name(&init_net, devname)) == NULL) + if ((dev = __dev_get_by_name(&init_net, devname)) == NULL) return NULL; if ((dev->flags & IFF_UP) && dev->type == ARPHRD_AX25) return dev; - dev_put(dev); return NULL; } @@ -720,27 +720,23 @@ int rose_rt_ioctl(unsigned int cmd, void __user *arg) case SIOCADDRT: if (copy_from_user(&rose_route, arg, sizeof(struct rose_route_struct))) return -EFAULT; - if ((dev = rose_ax25_dev_get(rose_route.device)) == NULL) + if ((dev = rose_ax25_dev_find(rose_route.device)) == NULL) return -EINVAL; - if (rose_dev_exists(&rose_route.address)) { /* Can't add routes to ourself */ - dev_put(dev); + if (rose_dev_exists(&rose_route.address)) /* Can't add routes to ourself */ return -EINVAL; - } if (rose_route.mask > 10) /* Mask can't be more than 10 digits */ return -EINVAL; if (rose_route.ndigis > AX25_MAX_DIGIS) return -EINVAL; err = rose_add_node(&rose_route, dev); - dev_put(dev); return err; case SIOCDELRT: if (copy_from_user(&rose_route, arg, sizeof(struct rose_route_struct))) return -EFAULT; - if ((dev = rose_ax25_dev_get(rose_route.device)) == NULL) + if ((dev = rose_ax25_dev_find(rose_route.device)) == NULL) return -EINVAL; err = rose_del_node(&rose_route, dev); - dev_put(dev); return err; case SIOCRSCLRRT: From 345e5a7672f561b539b3249cbe437b8d6595ab1b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 5 Nov 2009 14:34:57 +0000 Subject: [PATCH 179/743] serial: sh-sci: disable callback typo fix Avoid invoking the disable callback in case of NULL. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 85119fb7cb50..6498bd1fb6dd 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1143,7 +1143,7 @@ static void serial_console_write(struct console *co, const char *s, while ((sci_in(port, SCxSR) & bits) != bits) cpu_relax(); - if (sci_port->disable); + if (sci_port->disable) sci_port->disable(port); } From 421b541110b20ccff1a7ff3245439cb24efe9812 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 6 Nov 2009 17:23:33 +0900 Subject: [PATCH 180/743] sh: unwinder: Fix up invalid PC refetch in dwarf unwinder. The dwarf unwinder presently attempts to provide a sane PC value if none is provided, however the logic is broken and cases where a previous valid dwarf frame exists along with a bogus PC value can still proceed. This fixes up the test and prevents the unwinder from blowing up. Signed-off-by: Paul Mundt --- arch/sh/kernel/dwarf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c index 2d07084e4882..d76a23170dbb 100644 --- a/arch/sh/kernel/dwarf.c +++ b/arch/sh/kernel/dwarf.c @@ -555,7 +555,7 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc, * NOTE: the return address is guaranteed to be setup by the * time this function makes its first function call. */ - if (!pc && !prev) + if (!pc || !prev) pc = (unsigned long)current_text_addr(); #ifdef CONFIG_FUNCTION_GRAPH_TRACER From f5209b4446d185cc95f46363f8043a743530c15a Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Fri, 6 Nov 2009 00:31:01 -0800 Subject: [PATCH 181/743] be2net: Fix CQE_STATUS_EXTD_SHIFT define Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/benet/be_cmds.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index 49953787e41c..e5f9676cf1bc 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -68,7 +68,7 @@ enum { #define CQE_STATUS_COMPL_MASK 0xFFFF #define CQE_STATUS_COMPL_SHIFT 0 /* bits 0 - 15 */ #define CQE_STATUS_EXTD_MASK 0xFFFF -#define CQE_STATUS_EXTD_SHIFT 0 /* bits 0 - 15 */ +#define CQE_STATUS_EXTD_SHIFT 16 /* bits 16 - 31 */ struct be_mcc_compl { u32 status; /* dword 0 */ From f9dd09c7f7199685601d75882447a6598be8a3e0 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Fri, 6 Nov 2009 00:43:42 -0800 Subject: [PATCH 182/743] netfilter: nf_nat: fix NAT issue in 2.6.30.4+ Vitezslav Samel discovered that since 2.6.30.4+ active FTP can not work over NAT. The "cause" of the problem was a fix of unacknowledged data detection with NAT (commit a3a9f79e361e864f0e9d75ebe2a0cb43d17c4272). However, actually, that fix uncovered a long standing bug in TCP conntrack: when NAT was enabled, we simply updated the max of the right edge of the segments we have seen (td_end), by the offset NAT produced with changing IP/port in the data. However, we did not update the other parameter (td_maxend) which is affected by the NAT offset. Thus that could drift away from the correct value and thus resulted breaking active FTP. The patch below fixes the issue by *not* updating the conntrack parameters from NAT, but instead taking into account the NAT offsets in conntrack in a consistent way. (Updating from NAT would be more harder and expensive because it'd need to re-calculate parameters we already calculated in conntrack.) Signed-off-by: Jozsef Kadlecsik Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/net/netfilter/nf_conntrack.h | 8 ++-- include/net/netfilter/nf_nat_helper.h | 4 ++ net/ipv4/netfilter/nf_nat_core.c | 3 ++ net/ipv4/netfilter/nf_nat_helper.c | 34 +++++++++----- net/netfilter/nf_conntrack_core.c | 8 ++++ net/netfilter/nf_conntrack_proto_tcp.c | 64 +++++++++++--------------- 6 files changed, 67 insertions(+), 54 deletions(-) diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h index cbdd6284996d..5cf7270e3ffc 100644 --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h @@ -255,11 +255,9 @@ static inline bool nf_ct_kill(struct nf_conn *ct) } /* These are for NAT. Icky. */ -/* Update TCP window tracking data when NAT mangles the packet */ -extern void nf_conntrack_tcp_update(const struct sk_buff *skb, - unsigned int dataoff, - struct nf_conn *ct, int dir, - s16 offset); +extern s16 (*nf_ct_nat_offset)(const struct nf_conn *ct, + enum ip_conntrack_dir dir, + u32 seq); /* Fake conntrack entry for untracked connections */ extern struct nf_conn nf_conntrack_untracked; diff --git a/include/net/netfilter/nf_nat_helper.h b/include/net/netfilter/nf_nat_helper.h index 237a961f40e1..4222220920a5 100644 --- a/include/net/netfilter/nf_nat_helper.h +++ b/include/net/netfilter/nf_nat_helper.h @@ -32,4 +32,8 @@ extern int (*nf_nat_seq_adjust_hook)(struct sk_buff *skb, * to port ct->master->saved_proto. */ extern void nf_nat_follow_master(struct nf_conn *ct, struct nf_conntrack_expect *this); + +extern s16 nf_nat_get_offset(const struct nf_conn *ct, + enum ip_conntrack_dir dir, + u32 seq); #endif diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c index 68afc6ecd343..fe1a64479dd0 100644 --- a/net/ipv4/netfilter/nf_nat_core.c +++ b/net/ipv4/netfilter/nf_nat_core.c @@ -750,6 +750,8 @@ static int __init nf_nat_init(void) BUG_ON(nfnetlink_parse_nat_setup_hook != NULL); rcu_assign_pointer(nfnetlink_parse_nat_setup_hook, nfnetlink_parse_nat_setup); + BUG_ON(nf_ct_nat_offset != NULL); + rcu_assign_pointer(nf_ct_nat_offset, nf_nat_get_offset); return 0; cleanup_extend: @@ -764,6 +766,7 @@ static void __exit nf_nat_cleanup(void) nf_ct_extend_unregister(&nat_extend); rcu_assign_pointer(nf_nat_seq_adjust_hook, NULL); rcu_assign_pointer(nfnetlink_parse_nat_setup_hook, NULL); + rcu_assign_pointer(nf_ct_nat_offset, NULL); synchronize_net(); } diff --git a/net/ipv4/netfilter/nf_nat_helper.c b/net/ipv4/netfilter/nf_nat_helper.c index 09172a65d9b6..f9520fa3aba9 100644 --- a/net/ipv4/netfilter/nf_nat_helper.c +++ b/net/ipv4/netfilter/nf_nat_helper.c @@ -73,6 +73,28 @@ adjust_tcp_sequence(u32 seq, DUMP_OFFSET(this_way); } +/* Get the offset value, for conntrack */ +s16 nf_nat_get_offset(const struct nf_conn *ct, + enum ip_conntrack_dir dir, + u32 seq) +{ + struct nf_conn_nat *nat = nfct_nat(ct); + struct nf_nat_seq *this_way; + s16 offset; + + if (!nat) + return 0; + + this_way = &nat->seq[dir]; + spin_lock_bh(&nf_nat_seqofs_lock); + offset = after(seq, this_way->correction_pos) + ? this_way->offset_after : this_way->offset_before; + spin_unlock_bh(&nf_nat_seqofs_lock); + + return offset; +} +EXPORT_SYMBOL_GPL(nf_nat_get_offset); + /* Frobs data inside this packet, which is linear. */ static void mangle_contents(struct sk_buff *skb, unsigned int dataoff, @@ -189,11 +211,6 @@ nf_nat_mangle_tcp_packet(struct sk_buff *skb, adjust_tcp_sequence(ntohl(tcph->seq), (int)rep_len - (int)match_len, ct, ctinfo); - /* Tell TCP window tracking about seq change */ - nf_conntrack_tcp_update(skb, ip_hdrlen(skb), - ct, CTINFO2DIR(ctinfo), - (int)rep_len - (int)match_len); - nf_conntrack_event_cache(IPCT_NATSEQADJ, ct); } return 1; @@ -415,12 +432,7 @@ nf_nat_seq_adjust(struct sk_buff *skb, tcph->seq = newseq; tcph->ack_seq = newack; - if (!nf_nat_sack_adjust(skb, tcph, ct, ctinfo)) - return 0; - - nf_conntrack_tcp_update(skb, ip_hdrlen(skb), ct, dir, seqoff); - - return 1; + return nf_nat_sack_adjust(skb, tcph, ct, ctinfo); } /* Setup NAT on this expected conntrack so it follows master. */ diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 7c9ec3dee96e..0cdfb388a191 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1350,6 +1350,11 @@ err_stat: return ret; } +s16 (*nf_ct_nat_offset)(const struct nf_conn *ct, + enum ip_conntrack_dir dir, + u32 seq); +EXPORT_SYMBOL_GPL(nf_ct_nat_offset); + int nf_conntrack_init(struct net *net) { int ret; @@ -1367,6 +1372,9 @@ int nf_conntrack_init(struct net *net) /* For use by REJECT target */ rcu_assign_pointer(ip_ct_attach, nf_conntrack_attach); rcu_assign_pointer(nf_ct_destroy, destroy_conntrack); + + /* Howto get NAT offsets */ + rcu_assign_pointer(nf_ct_nat_offset, NULL); } return 0; diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index 97a82ba75376..ba2b76937283 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -492,6 +492,21 @@ static void tcp_sack(const struct sk_buff *skb, unsigned int dataoff, } } +#ifdef CONFIG_NF_NAT_NEEDED +static inline s16 nat_offset(const struct nf_conn *ct, + enum ip_conntrack_dir dir, + u32 seq) +{ + typeof(nf_ct_nat_offset) get_offset = rcu_dereference(nf_ct_nat_offset); + + return get_offset != NULL ? get_offset(ct, dir, seq) : 0; +} +#define NAT_OFFSET(pf, ct, dir, seq) \ + (pf == NFPROTO_IPV4 ? nat_offset(ct, dir, seq) : 0) +#else +#define NAT_OFFSET(pf, ct, dir, seq) 0 +#endif + static bool tcp_in_window(const struct nf_conn *ct, struct ip_ct_tcp *state, enum ip_conntrack_dir dir, @@ -506,6 +521,7 @@ static bool tcp_in_window(const struct nf_conn *ct, struct ip_ct_tcp_state *receiver = &state->seen[!dir]; const struct nf_conntrack_tuple *tuple = &ct->tuplehash[dir].tuple; __u32 seq, ack, sack, end, win, swin; + s16 receiver_offset; bool res; /* @@ -519,11 +535,16 @@ static bool tcp_in_window(const struct nf_conn *ct, if (receiver->flags & IP_CT_TCP_FLAG_SACK_PERM) tcp_sack(skb, dataoff, tcph, &sack); + /* Take into account NAT sequence number mangling */ + receiver_offset = NAT_OFFSET(pf, ct, !dir, ack - 1); + ack -= receiver_offset; + sack -= receiver_offset; + pr_debug("tcp_in_window: START\n"); pr_debug("tcp_in_window: "); nf_ct_dump_tuple(tuple); - pr_debug("seq=%u ack=%u sack=%u win=%u end=%u\n", - seq, ack, sack, win, end); + pr_debug("seq=%u ack=%u+(%d) sack=%u+(%d) win=%u end=%u\n", + seq, ack, receiver_offset, sack, receiver_offset, win, end); pr_debug("tcp_in_window: sender end=%u maxend=%u maxwin=%u scale=%i " "receiver end=%u maxend=%u maxwin=%u scale=%i\n", sender->td_end, sender->td_maxend, sender->td_maxwin, @@ -613,8 +634,8 @@ static bool tcp_in_window(const struct nf_conn *ct, pr_debug("tcp_in_window: "); nf_ct_dump_tuple(tuple); - pr_debug("seq=%u ack=%u sack =%u win=%u end=%u\n", - seq, ack, sack, win, end); + pr_debug("seq=%u ack=%u+(%d) sack=%u+(%d) win=%u end=%u\n", + seq, ack, receiver_offset, sack, receiver_offset, win, end); pr_debug("tcp_in_window: sender end=%u maxend=%u maxwin=%u scale=%i " "receiver end=%u maxend=%u maxwin=%u scale=%i\n", sender->td_end, sender->td_maxend, sender->td_maxwin, @@ -700,7 +721,7 @@ static bool tcp_in_window(const struct nf_conn *ct, before(seq, sender->td_maxend + 1) ? after(end, sender->td_end - receiver->td_maxwin - 1) ? before(sack, receiver->td_end + 1) ? - after(ack, receiver->td_end - MAXACKWINDOW(sender)) ? "BUG" + after(sack, receiver->td_end - MAXACKWINDOW(sender) - 1) ? "BUG" : "ACK is under the lower bound (possible overly delayed ACK)" : "ACK is over the upper bound (ACKed data not seen yet)" : "SEQ is under the lower bound (already ACKed data retransmitted)" @@ -715,39 +736,6 @@ static bool tcp_in_window(const struct nf_conn *ct, return res; } -#ifdef CONFIG_NF_NAT_NEEDED -/* Update sender->td_end after NAT successfully mangled the packet */ -/* Caller must linearize skb at tcp header. */ -void nf_conntrack_tcp_update(const struct sk_buff *skb, - unsigned int dataoff, - struct nf_conn *ct, int dir, - s16 offset) -{ - const struct tcphdr *tcph = (const void *)skb->data + dataoff; - const struct ip_ct_tcp_state *sender = &ct->proto.tcp.seen[dir]; - const struct ip_ct_tcp_state *receiver = &ct->proto.tcp.seen[!dir]; - __u32 end; - - end = segment_seq_plus_len(ntohl(tcph->seq), skb->len, dataoff, tcph); - - spin_lock_bh(&ct->lock); - /* - * We have to worry for the ack in the reply packet only... - */ - if (ct->proto.tcp.seen[dir].td_end + offset == end) - ct->proto.tcp.seen[dir].td_end = end; - ct->proto.tcp.last_end = end; - spin_unlock_bh(&ct->lock); - pr_debug("tcp_update: sender end=%u maxend=%u maxwin=%u scale=%i " - "receiver end=%u maxend=%u maxwin=%u scale=%i\n", - sender->td_end, sender->td_maxend, sender->td_maxwin, - sender->td_scale, - receiver->td_end, receiver->td_maxend, receiver->td_maxwin, - receiver->td_scale); -} -EXPORT_SYMBOL_GPL(nf_conntrack_tcp_update); -#endif - #define TH_FIN 0x01 #define TH_SYN 0x02 #define TH_RST 0x04 From 887e671f324d9898aaedb29a6ece6c853c394067 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 6 Nov 2009 00:50:39 -0800 Subject: [PATCH 183/743] decnet: netdevice refcount leak While working on device refcount stuff, I found a device refcount leak through DECNET. This nasty bug can be used to hold refcounts on any !DECNET netdevice. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/decnet/sysctl_net_decnet.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/net/decnet/sysctl_net_decnet.c b/net/decnet/sysctl_net_decnet.c index 26b0ab1e9f56..2036568beea9 100644 --- a/net/decnet/sysctl_net_decnet.c +++ b/net/decnet/sysctl_net_decnet.c @@ -263,11 +263,10 @@ static int dn_def_dev_strategy(ctl_table *table, return -ENODEV; rv = -ENODEV; - if (dev->dn_ptr != NULL) { + if (dev->dn_ptr != NULL) rv = dn_dev_set_default(dev, 1); - if (rv) - dev_put(dev); - } + if (rv) + dev_put(dev); } return rv; From ba230c3f6dc88ec008806adb27b12088486d508e Mon Sep 17 00:00:00 2001 From: Mingming Date: Fri, 6 Nov 2009 04:01:23 -0500 Subject: [PATCH 184/743] ext4: Fix return value of ext4_split_unwritten_extents() to fix direct I/O To prepare for a direct I/O write, we need to split the unwritten extents before submitting the I/O. When no extents needed to be split, ext4_split_unwritten_extents() was incorrectly returning 0 instead of the size of uninitialized extents. This bug caused the wrong return value sent back to VFS code when it gets called from async IO path, leading to an unnecessary fall back to buffered IO. This bug also hid the fact that the check to see whether or not a split would be necessary was incorrect; we can only skip splitting the extent if the write completely covers the uninitialized extent. Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" --- fs/ext4/extents.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index e991ae2b461c..715264b4bae4 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2807,6 +2807,8 @@ fix_extent_len: * into three uninitialized extent(at most). After IO complete, the part * being filled will be convert to initialized by the end_io callback function * via ext4_convert_unwritten_extents(). + * + * Returns the size of uninitialized extent to be written on success. */ static int ext4_split_unwritten_extents(handle_t *handle, struct inode *inode, @@ -2824,7 +2826,6 @@ static int ext4_split_unwritten_extents(handle_t *handle, unsigned int allocated, ee_len, depth; ext4_fsblk_t newblock; int err = 0; - int ret = 0; ext_debug("ext4_split_unwritten_extents: inode %lu," "iblock %llu, max_blocks %u\n", inode->i_ino, @@ -2842,12 +2843,12 @@ static int ext4_split_unwritten_extents(handle_t *handle, ext4_ext_store_pblock(&orig_ex, ext_pblock(ex)); /* - * if the entire unintialized extent length less than - * the size of extent to write, there is no need to split - * uninitialized extent + * If the uninitialized extent begins at the same logical + * block where the write begins, and the write completely + * covers the extent, then we don't need to split it. */ - if (allocated <= max_blocks) - return ret; + if ((iblock == ee_block) && (allocated <= max_blocks)) + return allocated; err = ext4_ext_get_access(handle, inode, path + depth); if (err) From 0fb18c4777ff424c1db694af98443a201fa4fc30 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 6 Nov 2009 04:52:50 -0800 Subject: [PATCH 185/743] Revert "ide: try to use PIO Mode 0 during probe if possible" This reverts commit 6029336426a2b43e4bc6f4a84be8789a047d139e. Ok, we really do need to revert this, even with Bart's sis5513.c fix in there. The problem is that several driver's ->set_pio_mode() method depends upon the drive->media type being set properly. Most of them use this to enable prefetching, which can only be done for disk media. But the commit being reverted here calls ->set_pio_mode() before it's setup. Actually it considers everything disk because that is the default media type set by ide_port_init_devices_data(). The set of drivers that depend upon the media type in their ->set_pio_method() are: drivers/ide/alim15x3.c drivers/ide/it8172.c drivers/ide/it8213.c drivers/ide/pdc202xx_old.c drivers/ide/piix.c drivers/ide/qd65xx.c drivers/ide/sis5513.c drivers/ide/slc90e66.c And it is possible that we could fix this by guarding the prefetching and other media dependent setting changes with a test on IDE_PFLAG_PROBING in hwif->port_flags, that's simply too risky for 2.6.32-rcX and -stable. Signed-off-by: David S. Miller --- drivers/ide/ide-probe.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 63c53d65e875..4d76ba473097 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1046,15 +1046,6 @@ static void ide_port_init_devices(ide_hwif_t *hwif) if (port_ops && port_ops->init_dev) port_ops->init_dev(drive); } - - ide_port_for_each_dev(i, drive, hwif) { - /* - * default to PIO Mode 0 before we figure out - * the most suited mode for the attached device - */ - if (port_ops && port_ops->set_pio_mode) - port_ops->set_pio_mode(drive, 0); - } } static void ide_init_port(ide_hwif_t *hwif, unsigned int port, From 4d187fb830a7aa8afb471124abe41b04caf49401 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Wed, 21 Oct 2009 23:10:03 +0200 Subject: [PATCH 186/743] ASoC: OMAP: Don't try to set unsupported OMAP_DMA_DATA_BURST_16 on OMAP1 After DMA burst mode has been introduced in sound/soc/omap/omap-pcm.c, omap_pcm_prepare() unconditionally calls: omap_set_dma_src_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); omap_set_dma_dest_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); Current implementation of those two functions found in arch/arm/plat-ompa/dma.c doesn't support OMAP_DMA_DATA_BURST_16 on OMAP1 at all, so they both end with BUG() on that machine. That results in ASoC being completely unusable, at least on my OMAP5910 based Amstrad Delta. The patch corrects the problem by not calling those two functions when run on OMAP1 class based machines. Created against linux-2.6.32-rc5. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik Acked-by: Jarkko Nikula Signed-off-by: Mark Brown --- sound/soc/omap/omap-pcm.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c index 5735945788bf..6a829eef2a4f 100644 --- a/sound/soc/omap/omap-pcm.c +++ b/sound/soc/omap/omap-pcm.c @@ -195,8 +195,12 @@ static int omap_pcm_prepare(struct snd_pcm_substream *substream) else omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ); - omap_set_dma_src_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); - omap_set_dma_dest_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); + if (!(cpu_class_is_omap1())) { + omap_set_dma_src_burst_mode(prtd->dma_ch, + OMAP_DMA_DATA_BURST_16); + omap_set_dma_dest_burst_mode(prtd->dma_ch, + OMAP_DMA_DATA_BURST_16); + } return 0; } From 6fc786d5034ed7ce2d43c459211137de6d99dd28 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Fri, 6 Nov 2009 18:00:24 +0900 Subject: [PATCH 187/743] ASoC: S3C64XX I2S: Enable audio-bus clock Added the missing clk_enable after acquiring the 'audio-bus' clock. Signed-off-by: Jassi Brar Signed-off-by: Mark Brown --- sound/soc/s3c24xx/s3c64xx-i2s.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c index 3c06c401d0fb..105a77eeded0 100644 --- a/sound/soc/s3c24xx/s3c64xx-i2s.c +++ b/sound/soc/s3c24xx/s3c64xx-i2s.c @@ -220,6 +220,8 @@ static __devinit int s3c64xx_iis_dev_probe(struct platform_device *pdev) goto err; } + clk_enable(i2s->iis_cclk); + ret = s3c_i2sv2_probe(pdev, dai, i2s, 0); if (ret) goto err_clk; From 61ec33eb7d8e1e94a93a8243238dc5f9a183001a Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 19 Oct 2009 10:53:36 -0500 Subject: [PATCH 188/743] [SCSI] scsi_transport_fc: Fix WARN message for FC passthru failure paths There are three error paths in the FC passthru code where job->reply->reply_payload_rcv_len does not get initialized, resulting in the WARN_ON in fc_bsg_jobdone going off. This patch fixes this. An example of one of the WARN_ON messages seen: Badness at drivers/scsi/scsi_transport_fc.c:3424 NIP: d000000000bf21ac LR: d000000000bf2684 CTR: c0000000003f753c REGS: c00000004eb03430 TRAP: 0700 Not tainted (2.6.32-rc4-git) MSR: 8000000000029032 CR: 24008444 XER: 00000012 TASK = c00000004c3fc9c0[3243] 'fcping' THREAD: c00000004eb00000 CPU: 0 GPR00: 0000000000000001 c00000004eb036b0 d000000000c01da0 000000004bf17fc0 GPR04: c00000004cd256a0 c00000007e011ce0 c00000007e011d00 c00000004e718000 GPR08: c00000004cd256a0 c00000004eb03ad0 c00000004cd25a90 0000000000000020 GPR12: d000000000bf7848 c000000000b62600 0000000000000060 fffffffffffffff4 GPR16: ffffffffffffffd6 c00000004c7a3060 ffffffff80000003 c00000004b0f0310 GPR20: c00000004e71b180 c00000004c7a3060 0000000000000004 0000000000000000 GPR24: c00000004e71b000 c00000004c7a3000 c00000004b0f0000 c00000004e718000 GPR28: c00000004cd256a0 c00000004cd25a90 d000000000c01db0 c00000004e01d680 NIP [d000000000bf21ac] .fc_bsg_jobdone+0x64/0x9c [scsi_transport_fc] LR [d000000000bf2684] .fc_bsg_request_handler+0x4a0/0x564 [scsi_transport_fc] Call Trace: [c00000004eb036b0] [c0000000003f755c] .get_device+0x20/0x38 (unreliable) [c00000004eb03720] [d000000000bf2684] .fc_bsg_request_handler+0x4a0/0x564 [scsi_transport_fc] [c00000004eb03820] [c0000000002c9b5c] .__generic_unplug_device+0x58/0x70 [c00000004eb038a0] [c0000000002ce9fc] .blk_execute_rq_nowait+0x70/0xf4 [c00000004eb03930] [c0000000002ceb2c] .blk_execute_rq+0xac/0x100 [c00000004eb03a60] [c0000000002d51b4] .bsg_ioctl+0x1fc/0x264 [c00000004eb03c10] [c00000000018a89c] .vfs_ioctl+0x54/0xec [c00000004eb03ca0] [c00000000018b01c] .do_vfs_ioctl+0x640/0x6a8 [c00000004eb03d80] [c00000000018b0fc] .SyS_ioctl+0x78/0xbc [c00000004eb03e30] [c0000000000085b4] syscall_exit+0x0/0x40 Instruction dump: 8003004c 2fa80000 90090104 38000000 900a0108 419e0038 e9230040 81680108 80690004 7f835840 7c101026 5400f7fe <0b000000> 7d605b78 7f8b1840 409d0008 Signed-off-by: Brian King Acked-By: James Smart Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_fc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index a67fed10598a..c6f70dae9b2e 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -3656,6 +3656,7 @@ fc_bsg_host_dispatch(struct request_queue *q, struct Scsi_Host *shost, fail_host_msg: /* return the errno failure code as the only status */ BUG_ON(job->reply_len < sizeof(uint32_t)); + job->reply->reply_payload_rcv_len = 0; job->reply->result = ret; job->reply_len = sizeof(uint32_t); fc_bsg_jobdone(job); @@ -3741,6 +3742,7 @@ check_bidi: fail_rport_msg: /* return the errno failure code as the only status */ BUG_ON(job->reply_len < sizeof(uint32_t)); + job->reply->reply_payload_rcv_len = 0; job->reply->result = ret; job->reply_len = sizeof(uint32_t); fc_bsg_jobdone(job); @@ -3797,6 +3799,7 @@ fc_bsg_request_handler(struct request_queue *q, struct Scsi_Host *shost, /* check if we have the msgcode value at least */ if (job->request_len < sizeof(uint32_t)) { BUG_ON(job->reply_len < sizeof(uint32_t)); + job->reply->reply_payload_rcv_len = 0; job->reply->result = -ENOMSG; job->reply_len = sizeof(uint32_t); fc_bsg_jobdone(job); From 3feeb89d40cc0ab3777f12571509b23da466105c Mon Sep 17 00:00:00 2001 From: Wayne Boyer Date: Tue, 20 Oct 2009 11:09:00 -0700 Subject: [PATCH 189/743] [SCSI] ipr: add workaround for MSI interrupts on P7 This patch adds some additional logic to the interrupt service routine to fix a potential problem where an MSI interrupt does not get cleared the first time. Signed-off-by: Wayne Boyer Acked-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ipr.c | 42 +++++++++++++++++++++++++++++++++--------- drivers/scsi/ipr.h | 1 + 2 files changed, 34 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 5f045505a1f4..76d294fc7846 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -4188,6 +4188,25 @@ static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg, return rc; } +/** + * ipr_isr_eh - Interrupt service routine error handler + * @ioa_cfg: ioa config struct + * @msg: message to log + * + * Return value: + * none + **/ +static void ipr_isr_eh(struct ipr_ioa_cfg *ioa_cfg, char *msg) +{ + ioa_cfg->errors_logged++; + dev_err(&ioa_cfg->pdev->dev, "%s\n", msg); + + if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) + ioa_cfg->sdt_state = GET_DUMP; + + ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); +} + /** * ipr_isr - Interrupt service routine * @irq: irq number @@ -4203,6 +4222,7 @@ static irqreturn_t ipr_isr(int irq, void *devp) volatile u32 int_reg, int_mask_reg; u32 ioasc; u16 cmd_index; + int num_hrrq = 0; struct ipr_cmnd *ipr_cmd; irqreturn_t rc = IRQ_NONE; @@ -4233,13 +4253,7 @@ static irqreturn_t ipr_isr(int irq, void *devp) IPR_HRRQ_REQ_RESP_HANDLE_MASK) >> IPR_HRRQ_REQ_RESP_HANDLE_SHIFT; if (unlikely(cmd_index >= IPR_NUM_CMD_BLKS)) { - ioa_cfg->errors_logged++; - dev_err(&ioa_cfg->pdev->dev, "Invalid response handle from IOA\n"); - - if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) - ioa_cfg->sdt_state = GET_DUMP; - - ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); + ipr_isr_eh(ioa_cfg, "Invalid response handle from IOA"); spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); return IRQ_HANDLED; } @@ -4266,8 +4280,18 @@ static irqreturn_t ipr_isr(int irq, void *devp) if (ipr_cmd != NULL) { /* Clear the PCI interrupt */ - writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg); - int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg; + do { + writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg); + int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg; + } while (int_reg & IPR_PCII_HRRQ_UPDATED && + num_hrrq++ < IPR_MAX_HRRQ_RETRIES); + + if (int_reg & IPR_PCII_HRRQ_UPDATED) { + ipr_isr_eh(ioa_cfg, "Error clearing HRRQ"); + spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); + return IRQ_HANDLED; + } + } else break; } diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h index 163245a1c3e5..19bbcf39f0c9 100644 --- a/drivers/scsi/ipr.h +++ b/drivers/scsi/ipr.h @@ -144,6 +144,7 @@ #define IPR_IOA_MAX_SECTORS 32767 #define IPR_VSET_MAX_SECTORS 512 #define IPR_MAX_CDB_LEN 16 +#define IPR_MAX_HRRQ_RETRIES 3 #define IPR_DEFAULT_BUS_WIDTH 16 #define IPR_80MBs_SCSI_RATE ((80 * 10) / (IPR_DEFAULT_BUS_WIDTH / 8)) From 88197966e1eeee6547764fa49bfce7e57549acd2 Mon Sep 17 00:00:00 2001 From: Anil Ravindranath Date: Thu, 24 Sep 2009 16:27:42 -0700 Subject: [PATCH 190/743] [SCSI] pmcraid: Fix ppc64 driver build for using cpu_to_le32 on U8 data type Fix a reported ppc64 driver build issue. Removed cpu_to_le32 conversion usage for flags in struct pmcraid_ioadl_desc. This was breaking the driver build in ppc64. drivers/scsi/pmcraid.c: In function 'pmcraid_request_sense': drivers/scsi/pmcraid.c:2254: warning: large integer implicitly truncated to unsigned type Signed-off-by: Anil Ravindranath Signed-off-by: James Bottomley --- drivers/scsi/pmcraid.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index f7c70e2a8224..0a97bc9074bb 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -1071,7 +1071,7 @@ static struct pmcraid_cmd *pmcraid_init_hcam ioarcb->data_transfer_length = cpu_to_le32(rcb_size); - ioadl[0].flags |= cpu_to_le32(IOADL_FLAGS_READ_LAST); + ioadl[0].flags |= IOADL_FLAGS_READ_LAST; ioadl[0].data_len = cpu_to_le32(rcb_size); ioadl[0].address = cpu_to_le32(dma); @@ -2251,7 +2251,7 @@ static void pmcraid_request_sense(struct pmcraid_cmd *cmd) ioadl->address = cpu_to_le64(cmd->sense_buffer_dma); ioadl->data_len = cpu_to_le32(SCSI_SENSE_BUFFERSIZE); - ioadl->flags = cpu_to_le32(IOADL_FLAGS_LAST_DESC); + ioadl->flags = IOADL_FLAGS_LAST_DESC; /* request sense might be called as part of error response processing * which runs in tasklets context. It is possible that mid-layer might @@ -3017,7 +3017,7 @@ static int pmcraid_build_ioadl( ioadl[i].flags = 0; } /* setup last descriptor */ - ioadl[i - 1].flags = cpu_to_le32(IOADL_FLAGS_LAST_DESC); + ioadl[i - 1].flags = IOADL_FLAGS_LAST_DESC; return 0; } @@ -3387,7 +3387,7 @@ static int pmcraid_build_passthrough_ioadls( } /* setup the last descriptor */ - ioadl[i - 1].flags = cpu_to_le32(IOADL_FLAGS_LAST_DESC); + ioadl[i - 1].flags = IOADL_FLAGS_LAST_DESC; return 0; } @@ -5314,7 +5314,7 @@ static void pmcraid_querycfg(struct pmcraid_cmd *cmd) cpu_to_le32(sizeof(struct pmcraid_config_table)); ioadl = &(ioarcb->add_data.u.ioadl[0]); - ioadl->flags = cpu_to_le32(IOADL_FLAGS_LAST_DESC); + ioadl->flags = IOADL_FLAGS_LAST_DESC; ioadl->address = cpu_to_le64(pinstance->cfg_table_bus_addr); ioadl->data_len = cpu_to_le32(sizeof(struct pmcraid_config_table)); From b2b465e9280b739a528435d2916c0a5c1b4eb100 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Thu, 29 Oct 2009 22:32:26 -0400 Subject: [PATCH 191/743] [SCSI] Fix incorrect reporting of host protection capabilities The advent of DIF Type 2 devices exposed some missing break statements in the protection mask switch constructs. However, rewriting the code to use an index into a small static array seemed like a more elegant solution. Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley --- include/scsi/scsi_host.h | 29 +++++++++++------------------ 1 file changed, 11 insertions(+), 18 deletions(-) diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index 6e728b176904..47941fc5aba7 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -797,30 +797,23 @@ static inline unsigned int scsi_host_get_prot(struct Scsi_Host *shost) static inline unsigned int scsi_host_dif_capable(struct Scsi_Host *shost, unsigned int target_type) { - switch (target_type) { - case 1: - if (shost->prot_capabilities & SHOST_DIF_TYPE1_PROTECTION) - return target_type; - case 2: - if (shost->prot_capabilities & SHOST_DIF_TYPE2_PROTECTION) - return target_type; - case 3: - if (shost->prot_capabilities & SHOST_DIF_TYPE3_PROTECTION) - return target_type; - } + static unsigned char cap[] = { 0, + SHOST_DIF_TYPE1_PROTECTION, + SHOST_DIF_TYPE2_PROTECTION, + SHOST_DIF_TYPE3_PROTECTION }; - return 0; + return shost->prot_capabilities & cap[target_type] ? target_type : 0; } static inline unsigned int scsi_host_dix_capable(struct Scsi_Host *shost, unsigned int target_type) { #if defined(CONFIG_BLK_DEV_INTEGRITY) - switch (target_type) { - case 0: return shost->prot_capabilities & SHOST_DIX_TYPE0_PROTECTION; - case 1: return shost->prot_capabilities & SHOST_DIX_TYPE1_PROTECTION; - case 2: return shost->prot_capabilities & SHOST_DIX_TYPE2_PROTECTION; - case 3: return shost->prot_capabilities & SHOST_DIX_TYPE3_PROTECTION; - } + static unsigned char cap[] = { SHOST_DIX_TYPE0_PROTECTION, + SHOST_DIX_TYPE1_PROTECTION, + SHOST_DIX_TYPE2_PROTECTION, + SHOST_DIX_TYPE3_PROTECTION }; + + return shost->prot_capabilities & cap[target_type]; #endif return 0; } From 143d40f3ab8fbd8ca2fe712ec8e072d687142804 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Fri, 6 Nov 2009 12:58:20 -0500 Subject: [PATCH 192/743] Revert "ipw2200: fix oops on missing firmware" This reverts commit e6c5fc53d0f44a772398402ee8a1879818e42b4e. Based on this regression report: Date: Thu, 05 Nov 2009 15:59:16 +0100 From: Holger Schurig To: linux-wireless@vger.kernel.org Subject: BUG: oops when "rmmod ipw2200" This happened on wireless-testing v2.6.32-rc6-41575-g5e68bfb. I modprobed ipw2200, put it into monitor mode, used tshark a while to monitor, then I stopped tshark, "ifconfig eth2 down" and finally "rmmod ipw2200", and voila: [ 917.189620] ------------[ cut here ]------------ [ 917.189717] kernel BUG at net/wireless/core.c:543! [ 917.189805] invalid opcode: 0000 [#1] PREEMPT SMP [ 917.190002] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0d.0/firmware/0000:02:0d.0/loading [ 917.190136] Modules linked in: lib80211_crypt_wep ipw2200(-) libipw lib80211 ath5k mac80211 ath cfg80211 psmouse uhci_hcd [ 917.190680] [ 917.190759] Pid: 1763, comm: rmmod Not tainted (2.6.32-rc6-wl #26) Amilo M1425 [ 917.190886] EIP: 0060:[] EFLAGS: 00010202 CPU: 0 [ 917.190992] EIP is at wiphy_unregister+0xd3/0x175 [cfg80211] [ 917.191083] EAX: f601d4c4 EBX: 00000000 ECX: 00000000 EDX: f79e8600 [ 917.191176] ESI: f601d400 EDI: f95b4350 EBP: f6009eb4 ESP: f6009e8c [ 917.191269] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 917.191360] Process rmmod (pid: 1763, ti=f6008000 task=f79e8130 task.ti=f6008000) [ 917.191486] Stack: [ 917.191562] f601d5a0 f601d484 f6460e98 f6009ea0 c01407ee f6009eb8 00000246 f64604c0 [ 917.191916] <0> f6460e5c f95b4350 f6009ec0 f94fd030 f6460e98 f6009edc f95a9d4f f787bc00 [ 917.192100] <0> f787bc58 f787bc00 f95b4350 f95b4350 f6009ee8 c0207fca f787bc58 f6009ef8 [ 917.192100] Call Trace: [ 917.192100] [] ? trace_hardirqs_on+0xb/0xd [ 917.192100] [] ? unregister_ieee80211+0xe/0x27 [libipw] [ 917.192100] [] ? ipw_pci_remove+0x59/0x227 [ipw2200] [ 917.192100] [] ? pci_device_remove+0x19/0x39 [ 917.192100] [] ? __device_release_driver+0x59/0x9d [ 917.192100] [] ? driver_detach+0x67/0x85 [ 917.192100] [] ? bus_remove_driver+0x69/0x85 [ 917.192100] [] ? driver_unregister+0x4d/0x54 [ 917.192100] [] ? pci_unregister_driver+0x28/0x71 [ 917.192100] [] ? ipw_exit+0x1c/0x1e [ipw2200] [ 917.192100] [] ? sys_delete_module+0x192/0x1ef [ 917.192100] [] ? remove_vma+0x52/0x58 [ 917.192100] [] ? sysenter_exit+0xf/0x18 [ 917.192100] [] ? sysenter_do_call+0x12/0x36 [ 917.192100] Code: 74 07 e8 81 bc 8c c7 eb c8 8d 55 e0 89 f8 e8 d6 6d 66 c7 8b 45 dc 31 d2 e8 81 cc 8c c7 8d 86 c4 00 00 00 39 86 c4 00 00 00 74 04 <0f> 0b eb fe 8b 45 dc 8d 5e 0c e8 5a cc 8c c7 8b 86 94 03 00 00 [ 917.192100] EIP: [] wiphy_unregister+0xd3/0x175 [cfg80211] SS:ESP 0068:f6009e8c [ 917.203718] ---[ end trace bcaaf449945a5100 ]--- Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2x00/ipw2100.c | 5 +---- drivers/net/wireless/ipw2x00/ipw2200.c | 2 -- drivers/net/wireless/ipw2x00/libipw.h | 1 - drivers/net/wireless/ipw2x00/libipw_module.c | 14 +++++--------- 4 files changed, 6 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index a741d37fd96f..240cff1e6979 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -6325,10 +6325,8 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, fail: if (dev) { - if (registered) { - unregister_ieee80211(priv->ieee); + if (registered) unregister_netdev(dev); - } ipw2100_hw_stop_adapter(priv); @@ -6385,7 +6383,6 @@ static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev) /* Unregister the device first - this results in close() * being called if the device is open. If we free storage * first, then close() will crash. */ - unregister_ieee80211(priv->ieee); unregister_netdev(dev); /* ipw2100_down will ensure that there is no more pending work diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 04341a2a6193..8d58e6ed4e7d 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -11821,7 +11821,6 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, if (err) { IPW_ERROR("Failed to register promiscuous network " "device (error %d).\n", err); - unregister_ieee80211(priv->ieee); unregister_netdev(priv->net_dev); goto out_remove_sysfs; } @@ -11872,7 +11871,6 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev) mutex_unlock(&priv->mutex); - unregister_ieee80211(priv->ieee); unregister_netdev(priv->net_dev); if (priv->rxq) { diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h index f42ade6c2d3e..bf45391172f3 100644 --- a/drivers/net/wireless/ipw2x00/libipw.h +++ b/drivers/net/wireless/ipw2x00/libipw.h @@ -1020,7 +1020,6 @@ static inline int libipw_is_cck_rate(u8 rate) /* ieee80211.c */ extern void free_ieee80211(struct net_device *dev, int monitor); extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor); -extern void unregister_ieee80211(struct libipw_device *ieee); extern int libipw_change_mtu(struct net_device *dev, int new_mtu); extern void libipw_networks_age(struct libipw_device *ieee, diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c index be5b809ec97a..a0e9f6aed7da 100644 --- a/drivers/net/wireless/ipw2x00/libipw_module.c +++ b/drivers/net/wireless/ipw2x00/libipw_module.c @@ -235,19 +235,16 @@ void free_ieee80211(struct net_device *dev, int monitor) libipw_networks_free(ieee); /* free cfg80211 resources */ - if (!monitor) + if (!monitor) { + wiphy_unregister(ieee->wdev.wiphy); + kfree(ieee->a_band.channels); + kfree(ieee->bg_band.channels); wiphy_free(ieee->wdev.wiphy); + } free_netdev(dev); } -void unregister_ieee80211(struct libipw_device *ieee) -{ - wiphy_unregister(ieee->wdev.wiphy); - kfree(ieee->a_band.channels); - kfree(ieee->bg_band.channels); -} - #ifdef CONFIG_LIBIPW_DEBUG static int debug = 0; @@ -333,4 +330,3 @@ module_init(libipw_init); EXPORT_SYMBOL(alloc_ieee80211); EXPORT_SYMBOL(free_ieee80211); -EXPORT_SYMBOL(unregister_ieee80211); From 198439e4afec431d2fa2cab9a4dcca87e5adc7a5 Mon Sep 17 00:00:00 2001 From: jack wang Date: Tue, 20 Oct 2009 16:10:45 +0800 Subject: [PATCH 193/743] [SCSI] libsas: do not set res = 0 in sas_ex_discover_dev() We should not set res to 0 in function sas_ex_discover_dev in order to let it discover it further when wide port hotplug in . Signed-off-by: Tom Peng Signed-off-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_expander.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index b3381959acce..33cf988c8c8a 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -960,7 +960,6 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id) } } - res = 0; } return res; From 66f84d6594729c866c0c03fe97159a987dad7d84 Mon Sep 17 00:00:00 2001 From: Sean Cross Date: Thu, 5 Nov 2009 20:22:03 +0100 Subject: [PATCH 194/743] rt2x00: Don't queue ieee80211 work after USB removal MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This prevents the rt2x00 driver from queueing ieee80211 work after the   USB card has been removed, preventing a kernel panic. Signed-off-by: Sean Cross Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 4 ++-- drivers/net/wireless/rt2x00/rt2x00link.c | 11 +++++++---- drivers/net/wireless/rt2x00/rt2x00usb.c | 9 ++++++++- 3 files changed, 17 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 71761b343839..73bbec58341e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -815,6 +815,8 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) mutex_init(&rt2x00dev->csr_mutex); + set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); + /* * Make room for rt2x00_intf inside the per-interface * structure ieee80211_vif. @@ -871,8 +873,6 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) rt2x00leds_register(rt2x00dev); rt2x00debug_register(rt2x00dev); - set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); - return 0; exit: diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c index c64db0ba7f40..c708d0be9155 100644 --- a/drivers/net/wireless/rt2x00/rt2x00link.c +++ b/drivers/net/wireless/rt2x00/rt2x00link.c @@ -362,8 +362,9 @@ void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev) rt2x00link_reset_tuner(rt2x00dev, false); - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->work, LINK_TUNE_INTERVAL); + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + ieee80211_queue_delayed_work(rt2x00dev->hw, + &link->work, LINK_TUNE_INTERVAL); } void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev) @@ -469,8 +470,10 @@ static void rt2x00link_tuner(struct work_struct *work) * Increase tuner counter, and reschedule the next link tuner run. */ link->count++; - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->work, LINK_TUNE_INTERVAL); + + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + ieee80211_queue_delayed_work(rt2x00dev->hw, + &link->work, LINK_TUNE_INTERVAL); } void rt2x00link_register(struct rt2x00_dev *rt2x00dev) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 501544882c2c..f02b48a90593 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -47,6 +47,8 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, (requesttype == USB_VENDOR_REQUEST_IN) ? usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0); + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return -ENODEV; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { status = usb_control_msg(usb_dev, pipe, request, requesttype, @@ -60,8 +62,10 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, * -ENODEV: Device has disappeared, no point continuing. * All other errors: Try again. */ - else if (status == -ENODEV) + else if (status == -ENODEV) { + clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); break; + } } ERROR(rt2x00dev, @@ -161,6 +165,9 @@ int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, { unsigned int i; + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return -ENODEV; + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt2x00usb_register_read_lock(rt2x00dev, offset, reg); if (!rt2x00_get_field32(*reg, field)) From 761434a318a64bf521f8abcc920e1d9837640fa2 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Fri, 6 Nov 2009 16:22:44 +0900 Subject: [PATCH 195/743] PCI ASPM: fix oops on root port removal Fix the following BUG_ON() problem reported by Alex Chiang. This problem happened when removing PCIe root port using PCI logical hotplug operation. The immediate cause of this problem is that the pointer to invalid data structure is passed to pcie_update_aspm_capable() by pcie_aspm_exit_link_state(). When pcie_aspm_exit_link_state() received a pointer to root port link, it unconfigures the root port link and frees its data structure at first. At this point, there are not links to configure under the root port and the data structure for root port link is already freed. So pcie_aspm_exit_link_state() must not call pcie_update_aspm_capable() and pcie_config_aspm_path(). This patch fixes the problem by changing pcie_aspm_exit_link_state() not to call pcie_update_aspm_capable() and pcie_config_aspm_path() if the specified link is root port link. ------------[ cut here ]------------ kernel BUG at drivers/pci/pcie/aspm.c:606! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/pci0000:40/0000:40:13.0/remove CPU 1 Modules linked in: shpchp Pid: 9345, comm: sysfsd Not tainted 2.6.32-rc5 #98 ProLiant DL785 G6 RIP: 0010:[] [] pcie_update_aspm_capable+0x15/0xbe RSP: 0018:ffff88082a2f5ca0 EFLAGS: 00010202 RAX: 0000000000000e77 RBX: ffff88182cc3e000 RCX: ffff88082a33d006 RDX: 0000000000000001 RSI: ffffffff811dff4a RDI: ffff88182cc3e000 RBP: ffff88082a2f5cc0 R08: ffff88182cc3e000 R09: 0000000000000000 R10: ffff88182fc00180 R11: ffff88182fc00198 R12: ffff88182cc3e000 R13: 0000000000000000 R14: ffff88182cc3e000 R15: ffff88082a2f5e20 FS: 00007f259a64b6f0(0000) GS:ffff880864600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00007feb53f73da0 CR3: 000000102cc94000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process sysfsd (pid: 9345, threadinfo ffff88082a2f4000, task ffff88082a33cf00) Stack: ffff88182cc3e000 ffff88182cc3e000 0000000000000000 ffff88082a33cf00 <0> ffff88082a2f5cf0 ffffffff811dff52 ffff88082a2f5cf0 ffff88082c525168 <0> ffff88402c9fd2f8 ffff88402c9fd2f8 ffff88082a2f5d20 ffffffff811d7db2 Call Trace: [] pcie_aspm_exit_link_state+0xf5/0x11e [] pci_stop_bus_device+0x76/0x7e [] pci_stop_bus_device+0x2b/0x7e [] pci_remove_bus_device+0x15/0xb9 [] remove_callback+0x29/0x3a [] sysfs_schedule_callback_work+0x15/0x6d [] worker_thread+0x19d/0x298 [] ? worker_thread+0x148/0x298 [] ? sysfs_schedule_callback_work+0x0/0x6d [] ? autoremove_wake_function+0x0/0x38 [] ? worker_thread+0x0/0x298 [] kthread+0x7d/0x85 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? kthread+0x0/0x85 [] ? child_rip+0x0/0x20 Code: 89 e5 8a 50 48 31 c0 c0 ea 03 83 e2 07 e8 b2 de fe ff c9 48 98 c3 55 48 89 e5 41 56 49 89 fe 41 55 41 54 53 48 83 7f 10 00 74 04 <0f> 0b eb fe 48 8b 05 da 7d 63 00 4c 8d 60 e8 4c 89 e1 eb 24 4c RIP [] pcie_update_aspm_capable+0x15/0xbe RSP ---[ end trace 6ae0f65bdeab8555 ]--- Reported-by: Alex Chiang Signed-off-by: Kenji Kaneshige Tested-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aspm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 745402e8e498..5b7056cec00c 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -656,8 +656,10 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev) free_link_state(link); /* Recheck latencies and configure upstream links */ - pcie_update_aspm_capable(root); - pcie_config_aspm_path(parent_link); + if (parent_link) { + pcie_update_aspm_capable(root); + pcie_config_aspm_path(parent_link); + } out: mutex_unlock(&aspm_lock); up_read(&pci_bus_sem); From ec06aedd44541129840ed52e6165afa3796a27bf Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 6 Nov 2009 14:18:29 -0500 Subject: [PATCH 196/743] cifs: clean up handling when server doesn't consistently support inode numbers It's possible that a server will return a valid FileID when we query the FILE_INTERNAL_INFO for the root inode, but then zeroed out inode numbers when we do a FindFile with an infolevel of SMB_FIND_FILE_ID_FULL_DIR_INFO. In this situation turn off querying for server inode numbers, generate a warning for the user and just generate an inode number using iunique. Once we generate any inode number with iunique we can no longer use any server inode numbers or we risk collisions, so ensure that we don't do that in cifs_get_inode_info either. Cc: Stable Reported-by: Timothy Normand Miller Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsproto.h | 1 + fs/cifs/inode.c | 7 ++----- fs/cifs/misc.c | 14 ++++++++++++++ fs/cifs/readdir.c | 7 ++++--- 4 files changed, 21 insertions(+), 8 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 6928c24d1d42..5646727e33f5 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -388,4 +388,5 @@ extern int CIFSSMBSetPosixACL(const int xid, struct cifsTconInfo *tcon, const struct nls_table *nls_codepage, int remap_special_chars); extern int CIFSGetExtAttr(const int xid, struct cifsTconInfo *tcon, const int netfid, __u64 *pExtAttrBits, __u64 *pMask); +extern void cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb); #endif /* _CIFSPROTO_H */ diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 5e2492535daa..cababd8a52df 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -512,13 +512,10 @@ int cifs_get_inode_info(struct inode **pinode, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); - if (rc1) { + if (rc1 || !fattr.cf_uniqueid) { cFYI(1, ("GetSrvInodeNum rc %d", rc1)); fattr.cf_uniqueid = iunique(sb, ROOT_I); - /* disable serverino if call not supported */ - if (rc1 == -EINVAL) - cifs_sb->mnt_cifs_flags &= - ~CIFS_MOUNT_SERVER_INUM; + cifs_autodisable_serverino(cifs_sb); } } else { fattr.cf_uniqueid = iunique(sb, ROOT_I); diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 0241b25ac33f..1e25efcb55c8 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -715,3 +715,17 @@ cifsConvertToUCS(__le16 *target, const char *source, int maxlen, ctoUCS_out: return i; } + +void +cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb) +{ + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) { + cifs_sb->mnt_cifs_flags &= CIFS_MOUNT_SERVER_INUM; + cERROR(1, ("Autodisabling the use of server inode numbers on " + "%s. This server doesn't seem to support them " + "properly. Hardlinks will not be recognized on this " + "mount. Consider mounting with the \"noserverino\" " + "option to silence this message.", + cifs_sb->tcon->treeName)); + } +} diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 1f098ca71636..f84062f9a985 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -727,11 +727,12 @@ static int cifs_filldir(char *pfindEntry, struct file *file, filldir_t filldir, cifs_dir_info_to_fattr(&fattr, (FILE_DIRECTORY_INFO *) pfindEntry, cifs_sb); - /* FIXME: make _to_fattr functions fill this out */ - if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_ID_FULL_DIR_INFO) + if (inum && (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)) { fattr.cf_uniqueid = inum; - else + } else { fattr.cf_uniqueid = iunique(sb, ROOT_I); + cifs_autodisable_serverino(cifs_sb); + } ino = cifs_uniqueid_to_ino_t(fattr.cf_uniqueid); tmp_dentry = cifs_readdir_lookup(file->f_dentry, &qstring, &fattr); From f475f6775465283494346663f201ad04810d2e8a Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 6 Nov 2009 14:18:49 -0500 Subject: [PATCH 197/743] cifs: don't use CIFSGetSrvInodeNumber in is_path_accessible Because it's lighter weight, CIFS tries to use CIFSGetSrvInodeNumber to verify the accessibility of the root inode and then falls back to doing a full QPathInfo if that fails with -EOPNOTSUPP. I have at least a report of a server that returns NT_STATUS_INTERNAL_ERROR rather than something that translates to EOPNOTSUPP. Rather than trying to be clever with that call, just have is_path_accessible do a normal QPathInfo. That call is widely supported and it shouldn't increase the overhead significantly. Cc: Stable Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index b09098079916..63ea83ff687f 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2220,16 +2220,8 @@ is_path_accessible(int xid, struct cifsTconInfo *tcon, struct cifs_sb_info *cifs_sb, const char *full_path) { int rc; - __u64 inode_num; FILE_ALL_INFO *pfile_info; - rc = CIFSGetSrvInodeNumber(xid, tcon, full_path, &inode_num, - cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); - if (rc != -EOPNOTSUPP) - return rc; - pfile_info = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL); if (pfile_info == NULL) return -ENOMEM; From f1b291d4c47440cbfc1a478e88800e2742d60a80 Mon Sep 17 00:00:00 2001 From: Simon Kagstrom Date: Fri, 6 Nov 2009 15:44:04 +0100 Subject: [PATCH 198/743] x86: Add Phoenix/MSC BIOSes to lowmem corruption list We have a board with a Phoenix/MSC BIOS which also corrupts the low 64KB of RAM, so add an entry to the table. Signed-off-by: Simon Kagstrom LKML-Reference: <20091106154404.002648d9@marrow.netinsight.se> Signed-off-by: H. Peter Anvin --- arch/x86/kernel/setup.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index e09f0e2c14b5..2a34f9c5be21 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -659,6 +659,13 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"), }, }, + { + .callback = dmi_low_memory_corruption, + .ident = "Phoenix/MSC BIOS", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix/MSC"), + }, + }, { /* * AMI BIOS with low memory corruption was found on Intel DG45ID board. From 539054a8fa5141c9a4e9ac6a86d249e3f2bdef45 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 6 Nov 2009 18:08:32 -0800 Subject: [PATCH 199/743] netfilter: xt_connlimit: fix regression caused by zero family value Commit v2.6.28-rc1~717^2~109^2~2 was slightly incomplete; not all instances of par->match->family were changed to par->family. References: http://bugzilla.netfilter.org/show_bug.cgi?id=610 Signed-off-by: Jan Engelhardt Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/xt_connlimit.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/net/netfilter/xt_connlimit.c b/net/netfilter/xt_connlimit.c index 680980954395..38f03f75a636 100644 --- a/net/netfilter/xt_connlimit.c +++ b/net/netfilter/xt_connlimit.c @@ -103,7 +103,7 @@ static int count_them(struct xt_connlimit_data *data, const struct nf_conntrack_tuple *tuple, const union nf_inet_addr *addr, const union nf_inet_addr *mask, - const struct xt_match *match) + u_int8_t family) { const struct nf_conntrack_tuple_hash *found; struct xt_connlimit_conn *conn; @@ -113,8 +113,7 @@ static int count_them(struct xt_connlimit_data *data, bool addit = true; int matches = 0; - - if (match->family == NFPROTO_IPV6) + if (family == NFPROTO_IPV6) hash = &data->iphash[connlimit_iphash6(addr, mask)]; else hash = &data->iphash[connlimit_iphash(addr->ip & mask->ip)]; @@ -157,8 +156,7 @@ static int count_them(struct xt_connlimit_data *data, continue; } - if (same_source_net(addr, mask, &conn->tuple.src.u3, - match->family)) + if (same_source_net(addr, mask, &conn->tuple.src.u3, family)) /* same source network -> be counted! */ ++matches; nf_ct_put(found_ct); @@ -207,7 +205,7 @@ connlimit_mt(const struct sk_buff *skb, const struct xt_match_param *par) spin_lock_bh(&info->data->lock); connections = count_them(info->data, tuple_ptr, &addr, - &info->mask, par->match); + &info->mask, par->family); spin_unlock_bh(&info->data->lock); if (connections < 0) { From 9e90c961134929678022aee0c68b16c1ed520614 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 6 Nov 2009 02:06:59 +0000 Subject: [PATCH 200/743] be2net: fix to set proper flow control on resume If be2 goes into suspend after a user changes the flow control settings, we are not programming them back after resume. This patch takes care of it. We now get the flow control settings before going to suspend mode and then apply them during resume. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be.h | 2 ++ drivers/net/benet/be_ethtool.c | 8 +++++--- drivers/net/benet/be_main.c | 8 +++++++- 3 files changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index a80da0e14a52..3b79a225628a 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -259,6 +259,8 @@ struct be_adapter { u32 port_num; bool promiscuous; u32 cap; + u32 rx_fc; /* Rx flow control */ + u32 tx_fc; /* Tx flow control */ }; extern const struct ethtool_ops be_ethtool_ops; diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c index cda5bf2fc50a..f0fd95b43c07 100644 --- a/drivers/net/benet/be_ethtool.c +++ b/drivers/net/benet/be_ethtool.c @@ -323,10 +323,12 @@ be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd) if (ecmd->autoneg != 0) return -EINVAL; + adapter->tx_fc = ecmd->tx_pause; + adapter->rx_fc = ecmd->rx_pause; - status = be_cmd_set_flow_control(adapter, ecmd->tx_pause, - ecmd->rx_pause); - if (!status) + status = be_cmd_set_flow_control(adapter, + adapter->tx_fc, adapter->rx_fc); + if (status) dev_warn(&adapter->pdev->dev, "Pause param set failed.\n"); return status; diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 1f941f027718..4a7a4527182d 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1652,7 +1652,8 @@ static int be_setup(struct be_adapter *adapter) if (status != 0) goto mccqs_destroy; - status = be_cmd_set_flow_control(adapter, true, true); + status = be_cmd_set_flow_control(adapter, + adapter->tx_fc, adapter->rx_fc); if (status != 0) goto mccqs_destroy; return 0; @@ -1909,6 +1910,10 @@ static void be_netdev_init(struct net_device *netdev) adapter->rx_csum = true; + /* Default settings for Rx and Tx flow control */ + adapter->rx_fc = true; + adapter->tx_fc = true; + netif_set_gso_max_size(netdev, 65535); BE_SET_NETDEV_OPS(netdev, &be_netdev_ops); @@ -2171,6 +2176,7 @@ static int be_suspend(struct pci_dev *pdev, pm_message_t state) be_close(netdev); rtnl_unlock(); } + be_cmd_get_flow_control(adapter, &adapter->tx_fc, &adapter->rx_fc); be_clear(adapter); pci_save_state(pdev); From 4f2aa89cd263932d61f286307771996df76bf63e Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 6 Nov 2009 02:07:32 +0000 Subject: [PATCH 201/743] be2net: Bug fix to send config commands to hardware after netdev_register Sending config commands to be2 hardware before netdev_register is completed, is sometimes causing the async link notification to arrive even before the driver is ready to handle it. The commands for vlan config and flow control settings can infact wait till be_open. This patch takes care of that. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be_main.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 4a7a4527182d..876b357101fa 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1610,11 +1610,21 @@ static int be_open(struct net_device *netdev) status = be_cmd_link_status_query(adapter, &link_up); if (status) - return status; + goto ret_sts; be_link_status_update(adapter, link_up); + status = be_vid_config(adapter); + if (status) + goto ret_sts; + + status = be_cmd_set_flow_control(adapter, + adapter->tx_fc, adapter->rx_fc); + if (status) + goto ret_sts; + schedule_delayed_work(&adapter->work, msecs_to_jiffies(100)); - return 0; +ret_sts: + return status; } static int be_setup(struct be_adapter *adapter) @@ -1648,18 +1658,8 @@ static int be_setup(struct be_adapter *adapter) if (status != 0) goto rx_qs_destroy; - status = be_vid_config(adapter); - if (status != 0) - goto mccqs_destroy; - - status = be_cmd_set_flow_control(adapter, - adapter->tx_fc, adapter->rx_fc); - if (status != 0) - goto mccqs_destroy; return 0; -mccqs_destroy: - be_mcc_queues_destroy(adapter); rx_qs_destroy: be_rx_queues_destroy(adapter); tx_qs_destroy: From 2b2072e902848a63168570f500a5726744b3873a Mon Sep 17 00:00:00 2001 From: Sebastian Haas Date: Wed, 4 Nov 2009 05:48:33 +0000 Subject: [PATCH 202/743] ems_usb: Fix byte order issues on big endian machines CPC-USB is using a ARM7 core with little endian byte order. The "id" field in can_msg needs byte order conversion from/to CPU byte order. Signed-off-by: Sebastian Haas Signed-off-by: David S. Miller --- drivers/net/can/usb/ems_usb.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c index 9012e0abc626..abdbd9c2b788 100644 --- a/drivers/net/can/usb/ems_usb.c +++ b/drivers/net/can/usb/ems_usb.c @@ -319,7 +319,7 @@ static void ems_usb_rx_can_msg(struct ems_usb *dev, struct ems_cpc_msg *msg) cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame)); - cf->can_id = msg->msg.can_msg.id; + cf->can_id = le32_to_cpu(msg->msg.can_msg.id); cf->can_dlc = min_t(u8, msg->msg.can_msg.length, 8); if (msg->type == CPC_MSG_TYPE_EXT_CAN_FRAME @@ -813,6 +813,9 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne msg->length = CPC_CAN_MSG_MIN_SIZE + cf->can_dlc; } + /* Respect byte order */ + msg->msg.can_msg.id = cpu_to_le32(msg->msg.can_msg.id); + for (i = 0; i < MAX_TX_URBS; i++) { if (dev->tx_contexts[i].echo_index == MAX_TX_URBS) { context = &dev->tx_contexts[i]; From 87d75b52414a22c54cf8382bcdd329376b1bce78 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 5 Nov 2009 23:14:29 +0000 Subject: [PATCH 203/743] NET: cassini, fix lock imbalance Stanse found that one error path in cas_open omits to unlock pm_mutex. Fix that. Signed-off-by: Jiri Slaby Signed-off-by: David S. Miller --- drivers/net/cassini.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index 05916aafa4f1..f857afe8e488 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -4342,11 +4342,11 @@ static int cas_open(struct net_device *dev) cas_unlock_all_restore(cp, flags); } + err = -ENOMEM; if (cas_tx_tiny_alloc(cp) < 0) - return -ENOMEM; + goto err_unlock; /* alloc rx descriptors */ - err = -ENOMEM; if (cas_alloc_rxds(cp) < 0) goto err_tx_tiny; @@ -4386,6 +4386,7 @@ err_spare: cas_free_rxds(cp); err_tx_tiny: cas_tx_tiny_free(cp); +err_unlock: mutex_unlock(&cp->pm_mutex); return err; } From dcaa6a9414cdc767c0afba4705c25ae9cf6096b5 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Tue, 3 Nov 2009 03:42:40 +0000 Subject: [PATCH 204/743] macsonic: fix crash on PowerBook 520 No-one seems to know where the PowerBook 500 series store their ethernet MAC addresses. So, rather than crash, use a MAC address from the SONIC CAM. Failing that, generate a random one. Signed-off-by: Finn Thain Signed-off-by: David S. Miller --- drivers/net/macsonic.c | 117 +++++++++++++++++++++-------------------- 1 file changed, 60 insertions(+), 57 deletions(-) diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c index 61eabcac734c..b3d7d8d77f46 100644 --- a/drivers/net/macsonic.c +++ b/drivers/net/macsonic.c @@ -223,69 +223,73 @@ static int __devinit macsonic_init(struct net_device *dev) return 0; } -static int __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev) +#define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \ + memcmp(mac, "\x00\xA0\x40", 3) && \ + memcmp(mac, "\x00\x80\x19", 3) && \ + memcmp(mac, "\x00\x05\x02", 3)) + +static void __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev) { struct sonic_local *lp = netdev_priv(dev); const int prom_addr = ONBOARD_SONIC_PROM_BASE; - int i; + unsigned short val; - /* On NuBus boards we can sometimes look in the ROM resources. - No such luck for comm-slot/onboard. */ - for(i = 0; i < 6; i++) - dev->dev_addr[i] = SONIC_READ_PROM(i); + /* + * On NuBus boards we can sometimes look in the ROM resources. + * No such luck for comm-slot/onboard. + * On the PowerBook 520, the PROM base address is a mystery. + */ + if (hwreg_present((void *)prom_addr)) { + int i; - /* Most of the time, the address is bit-reversed. The NetBSD - source has a rather long and detailed historical account of - why this is so. */ - if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && - memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && - memcmp(dev->dev_addr, "\x00\x80\x19", 3) && - memcmp(dev->dev_addr, "\x00\x05\x02", 3)) - bit_reverse_addr(dev->dev_addr); - else - return 0; + for (i = 0; i < 6; i++) + dev->dev_addr[i] = SONIC_READ_PROM(i); + if (!INVALID_MAC(dev->dev_addr)) + return; - /* If we still have what seems to be a bogus address, we'll - look in the CAM. The top entry should be ours. */ - /* Danger! This only works if MacOS has already initialized - the card... */ - if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && - memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && - memcmp(dev->dev_addr, "\x00\x80\x19", 3) && - memcmp(dev->dev_addr, "\x00\x05\x02", 3)) - { - unsigned short val; - - printk(KERN_INFO "macsonic: PROM seems to be wrong, trying CAM entry 15\n"); - - SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); - SONIC_WRITE(SONIC_CEP, 15); - - val = SONIC_READ(SONIC_CAP2); - dev->dev_addr[5] = val >> 8; - dev->dev_addr[4] = val & 0xff; - val = SONIC_READ(SONIC_CAP1); - dev->dev_addr[3] = val >> 8; - dev->dev_addr[2] = val & 0xff; - val = SONIC_READ(SONIC_CAP0); - dev->dev_addr[1] = val >> 8; - dev->dev_addr[0] = val & 0xff; - - printk(KERN_INFO "HW Address from CAM 15: %pM\n", - dev->dev_addr); - } else return 0; - - if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && - memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && - memcmp(dev->dev_addr, "\x00\x80\x19", 3) && - memcmp(dev->dev_addr, "\x00\x05\x02", 3)) - { /* - * Still nonsense ... messed up someplace! + * Most of the time, the address is bit-reversed. The NetBSD + * source has a rather long and detailed historical account of + * why this is so. */ - printk(KERN_ERR "macsonic: ERROR (INVALID MAC)\n"); - return -EIO; - } else return 0; + bit_reverse_addr(dev->dev_addr); + if (!INVALID_MAC(dev->dev_addr)) + return; + + /* + * If we still have what seems to be a bogus address, we'll + * look in the CAM. The top entry should be ours. + */ + printk(KERN_WARNING "macsonic: MAC address in PROM seems " + "to be invalid, trying CAM\n"); + } else { + printk(KERN_WARNING "macsonic: cannot read MAC address from " + "PROM, trying CAM\n"); + } + + /* This only works if MacOS has already initialized the card. */ + + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + SONIC_WRITE(SONIC_CEP, 15); + + val = SONIC_READ(SONIC_CAP2); + dev->dev_addr[5] = val >> 8; + dev->dev_addr[4] = val & 0xff; + val = SONIC_READ(SONIC_CAP1); + dev->dev_addr[3] = val >> 8; + dev->dev_addr[2] = val & 0xff; + val = SONIC_READ(SONIC_CAP0); + dev->dev_addr[1] = val >> 8; + dev->dev_addr[0] = val & 0xff; + + if (!INVALID_MAC(dev->dev_addr)) + return; + + /* Still nonsense ... messed up someplace! */ + + printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 " + "seems invalid, will use a random MAC\n"); + random_ether_addr(dev->dev_addr); } static int __devinit mac_onboard_sonic_probe(struct net_device *dev) @@ -402,8 +406,7 @@ static int __devinit mac_onboard_sonic_probe(struct net_device *dev) SONIC_WRITE(SONIC_ISR, 0x7fff); /* Now look for the MAC address. */ - if (mac_onboard_sonic_ethernet_addr(dev) != 0) - return -ENODEV; + mac_onboard_sonic_ethernet_addr(dev); /* Shared init code */ return macsonic_init(dev); From b352e40da8977253f49850a24f6448653a459ac0 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 6 Nov 2009 12:55:38 +0000 Subject: [PATCH 205/743] ixgbe: Fix gso_max_size for 82599 when DCB is enabled The 32k gso_max_size when DCB is enabled is for 82598 only, not for 82599. Signed-off-by: Yi Zou Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index cbb143ca1eb8..26fc1df2b2e0 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2471,7 +2471,10 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter) ixgbe_restore_vlan(adapter); #ifdef CONFIG_IXGBE_DCB if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { - netif_set_gso_max_size(netdev, 32768); + if (hw->mac.type == ixgbe_mac_82598EB) + netif_set_gso_max_size(netdev, 32768); + else + netif_set_gso_max_size(netdev, 65536); ixgbe_configure_dcb(adapter); } else { netif_set_gso_max_size(netdev, 65536); From 26f23d82dd8eae6dcc2ab99c04a9256089576a73 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 6 Nov 2009 12:56:00 +0000 Subject: [PATCH 206/743] ixgbe: Fix checking TFCS register for TXOFF status when DCB is enabled When DCB is enabled, the ixgbe_check_tx_hang() should check the corresponding TC's TXOFF in TFCS based on the TC that the tx ring belongs to. Adds a function to map from the tx_ring hw reg_idx to the correspodning TC and read TFCS accordingly. Signed-off-by: Yi Zou Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 52 +++++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 26fc1df2b2e0..2d0f618b4a9d 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -226,6 +226,56 @@ static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter, /* tx_buffer_info must be completely set up in the transmit path */ } +/** + * ixgbe_tx_is_paused - check if the tx ring is paused + * @adapter: the ixgbe adapter + * @tx_ring: the corresponding tx_ring + * + * If not in DCB mode, checks TFCS.TXOFF, otherwise, find out the + * corresponding TC of this tx_ring when checking TFCS. + * + * Returns : true if paused + */ +static inline bool ixgbe_tx_is_paused(struct ixgbe_adapter *adapter, + struct ixgbe_ring *tx_ring) +{ + int tc; + u32 txoff = IXGBE_TFCS_TXOFF; + +#ifdef CONFIG_IXGBE_DCB + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + int reg_idx = tx_ring->reg_idx; + int dcb_i = adapter->ring_feature[RING_F_DCB].indices; + + if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + tc = reg_idx >> 2; + txoff = IXGBE_TFCS_TXOFF0; + } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + tc = 0; + txoff = IXGBE_TFCS_TXOFF; + if (dcb_i == 8) { + /* TC0, TC1 */ + tc = reg_idx >> 5; + if (tc == 2) /* TC2, TC3 */ + tc += (reg_idx - 64) >> 4; + else if (tc == 3) /* TC4, TC5, TC6, TC7 */ + tc += 1 + ((reg_idx - 96) >> 3); + } else if (dcb_i == 4) { + /* TC0, TC1 */ + tc = reg_idx >> 6; + if (tc == 1) { + tc += (reg_idx - 64) >> 5; + if (tc == 2) /* TC2, TC3 */ + tc += (reg_idx - 96) >> 4; + } + } + } + txoff <<= tc; + } +#endif + return IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & txoff; +} + static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter, struct ixgbe_ring *tx_ring, unsigned int eop) @@ -237,7 +287,7 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter, adapter->detect_tx_hung = false; if (tx_ring->tx_buffer_info[eop].time_stamp && time_after(jiffies, tx_ring->tx_buffer_info[eop].time_stamp + HZ) && - !(IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF)) { + !ixgbe_tx_is_paused(adapter, tx_ring)) { /* detected Tx unit hang */ union ixgbe_adv_tx_desc *tx_desc; tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop); From ee5f784a2d48cdacf561e99b2d01b23364189474 Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Fri, 6 Nov 2009 12:56:20 +0000 Subject: [PATCH 207/743] ixgbe: fix traffic hangs on Tx with ioatdma loaded When ioatdma was loaded we we were unable to transmit traffic. We weren't using the correct registers in ixgbe_update_tx_dca for 82599 systems. Likewise in ixgbe_configure_tx() we weren't disabling the arbiter before modifying MTQC. Signed-off-by: Don Skidmore Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 2d0f618b4a9d..5bd9e6bf6f2f 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -44,6 +44,7 @@ #include "ixgbe.h" #include "ixgbe_common.h" +#include "ixgbe_dcb_82599.h" char ixgbe_driver_name[] = "ixgbe"; static const char ixgbe_driver_string[] = @@ -462,19 +463,23 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter, u32 txctrl; int cpu = get_cpu(); int q = tx_ring - adapter->tx_ring; + struct ixgbe_hw *hw = &adapter->hw; if (tx_ring->cpu != cpu) { - txctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q)); if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(q)); txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK; txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); + txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(q), txctrl); } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(q)); txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK_82599; txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) << - IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599); + IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599); + txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(q), txctrl); } - txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; - IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q), txctrl); tx_ring->cpu = cpu; } put_cpu(); @@ -1963,11 +1968,25 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) break; } } + if (hw->mac.type == ixgbe_mac_82599EB) { + u32 rttdcs; + + /* disable the arbiter while setting MTQC */ + rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS); + rttdcs |= IXGBE_RTTDCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); + /* We enable 8 traffic classes, DCB only */ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) IXGBE_WRITE_REG(hw, IXGBE_MTQC, (IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ)); + else + IXGBE_WRITE_REG(hw, IXGBE_MTQC, IXGBE_MTQC_64Q_1PB); + + /* re-eable the arbiter */ + rttdcs &= ~IXGBE_RTTDCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); } } From 60fa6c374e7efcbed04bc6d11d3b35645c523b2f Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Fri, 6 Nov 2009 07:44:57 +0000 Subject: [PATCH 208/743] qlge: Fix early exit from mbox cmd complete wait. This line was accidentally left out of the previous commit # da03945140a035a2962f7f93e359085596f20499 ("qlge: Fix firmware mailbox command timeout."). Signed-off-by: Ron Mercer Signed-off-by: David S. Miller --- drivers/net/qlge/qlge_mpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c index bcf13c96f73f..aec05f266107 100644 --- a/drivers/net/qlge/qlge_mpi.c +++ b/drivers/net/qlge/qlge_mpi.c @@ -499,7 +499,7 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) /* Wait for the interrupt to come in. */ status = ql_wait_mbx_cmd_cmplt(qdev); if (status) - goto end; + continue; /* Process the event. If it's an AEN, it * will be handled in-line or a worker From 73475339005dc68eb0bd2f6b1e93a3a39b628410 Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Fri, 6 Nov 2009 07:44:58 +0000 Subject: [PATCH 209/743] qlge: Set PCIe reset type for EEH to fundamental. This device requires a fundamental reset when recovering from EEH. Signed-off-by: Ron Mercer Signed-off-by: David S. Miller --- drivers/net/qlge/qlge_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index cea7531f4f40..a2fc70a0d0cc 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -3916,6 +3916,8 @@ static int __devinit ql_init_device(struct pci_dev *pdev, goto err_out; } + /* Set PCIe reset type for EEH to fundamental. */ + pdev->needs_freset = 1; pci_save_state(pdev); qdev->reg_base = ioremap_nocache(pci_resource_start(pdev, 1), From 23ca0c989e46924393f1d54bec84801d035dd28e Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 6 Nov 2009 10:37:41 +0000 Subject: [PATCH 210/743] ipip: Fix handling of DF packets when pmtudisc is OFF RFC 2003 requires the outer header to have DF set if DF is set on the inner header, even when PMTU discovery is off for the tunnel. Our implementation does exactly that. For this to work properly the IPIP gateway also needs to engate in PMTU when the inner DF bit is set. As otherwise the original host would not be able to carry out its PMTU successfully since part of the path is only visible to the gateway. Unfortunately when the tunnel PMTU discovery setting is off, we do not collect the necessary soft state, resulting in blackholes when the original host tries to perform PMTU discovery. This problem is not reproducible on the IPIP gateway itself as the inner packet usually has skb->local_df set. This is not correctly cleared (an unrelated bug) when the packet passes through the tunnel, which allows fragmentation to occur. For hosts behind the IPIP gateway it is readily visible with a simple ping. This patch fixes the problem by performing PMTU discovery for all packets with the inner DF bit set, regardless of the PMTU discovery setting on the tunnel itself. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv4/ipip.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c index 08ccd344de7a..ae40ed1ba560 100644 --- a/net/ipv4/ipip.c +++ b/net/ipv4/ipip.c @@ -438,25 +438,27 @@ static netdev_tx_t ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev) goto tx_error; } - if (tiph->frag_off) + df |= old_iph->frag_off & htons(IP_DF); + + if (df) { mtu = dst_mtu(&rt->u.dst) - sizeof(struct iphdr); - else - mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu; - if (mtu < 68) { - stats->collisions++; - ip_rt_put(rt); - goto tx_error; - } - if (skb_dst(skb)) - skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu); + if (mtu < 68) { + stats->collisions++; + ip_rt_put(rt); + goto tx_error; + } - df |= (old_iph->frag_off&htons(IP_DF)); + if (skb_dst(skb)) + skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu); - if ((old_iph->frag_off&htons(IP_DF)) && mtu < ntohs(old_iph->tot_len)) { - icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu)); - ip_rt_put(rt); - goto tx_error; + if ((old_iph->frag_off & htons(IP_DF)) && + mtu < ntohs(old_iph->tot_len)) { + icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, + htonl(mtu)); + ip_rt_put(rt); + goto tx_error; + } } if (tunnel->err_count > 0) { From cc05368c52fed7d9efa0f56c5270e95bb569713e Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Fri, 6 Nov 2009 14:52:34 +0000 Subject: [PATCH 211/743] hisax: remove bad udelay call to fix build error on ARM The hisax ISDN driver fails to build on ARM with CONFIG_HISAX_ELSA: | drivers/built-in.o: In function `modem_set_dial': | drivers/isdn/hisax/elsa_ser.c:535: undefined reference to `__bad_udelay' | drivers/isdn/hisax/elsa_ser.c:544: undefined reference to `__bad_udelay' | drivers/built-in.o: In function `modem_set_init': | drivers/isdn/hisax/elsa_ser.c:486: undefined reference to `__bad_udelay' | [...] According to the comment in arch/arm/include/asm/delay.h, __bad_udelay is specifically designed on ARM to produce a build failure when udelay is called with a value > 2000. Signed-off-by: Martin Michlmayr Signed-off-by: David S. Miller --- drivers/isdn/hisax/elsa_ser.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/isdn/hisax/elsa_ser.c b/drivers/isdn/hisax/elsa_ser.c index f181db464392..1657bba7879e 100644 --- a/drivers/isdn/hisax/elsa_ser.c +++ b/drivers/isdn/hisax/elsa_ser.c @@ -477,62 +477,62 @@ static void modem_set_init(struct IsdnCardState *cs) { int timeout; -#define RCV_DELAY 20000 +#define RCV_DELAY 20 modem_write_cmd(cs, MInit_1, strlen(MInit_1)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_2, strlen(MInit_2)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_3, strlen(MInit_3)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_4, strlen(MInit_4)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY ); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_5, strlen(MInit_5)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_6, strlen(MInit_6)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_7, strlen(MInit_7)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); } static void modem_set_dial(struct IsdnCardState *cs, int outgoing) { int timeout; -#define RCV_DELAY 20000 +#define RCV_DELAY 20 modem_write_cmd(cs, MInit_speed28800, strlen(MInit_speed28800)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); if (outgoing) modem_write_cmd(cs, MInit_dialout, strlen(MInit_dialout)); else @@ -541,7 +541,7 @@ modem_set_dial(struct IsdnCardState *cs, int outgoing) { while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); } static void From 70edc800a39327174d3244f9226ce8cacd01dc91 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 6 Nov 2009 22:41:29 +0000 Subject: [PATCH 212/743] sound: Replace old style lock initializer SPIN_LOCK_UNLOCKED is deprecated. Use __SPIN_LOCK_UNLOCKED instead. Signed-off-by: Thomas Gleixner Signed-off-by: Takashi Iwai --- sound/oss/dmasound/dmasound_core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/oss/dmasound/dmasound_core.c b/sound/oss/dmasound/dmasound_core.c index 793b7f478433..3f3c3f71db4b 100644 --- a/sound/oss/dmasound/dmasound_core.c +++ b/sound/oss/dmasound/dmasound_core.c @@ -219,7 +219,9 @@ static int shared_resources_initialised; * Mid level stuff */ -struct sound_settings dmasound = { .lock = SPIN_LOCK_UNLOCKED }; +struct sound_settings dmasound = { + .lock = __SPIN_LOCK_UNLOCKED(dmasound.lock) +}; static inline void sound_silence(void) { From f495088210c8b9e20791d995a8210170c68d2deb Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Fri, 6 Nov 2009 23:44:53 +0200 Subject: [PATCH 213/743] ALSA: usb-audio: fix combine_word problem Fix combine_word problem where first octet is not read properly. The only affected place seems to be the INPUT_TERMINAL type. Before now, sound controls can be created with the output terminal's name which is a fallback mechanism used only for unknown input terminal types. For example, Line can wrongly appear as Speaker. After the change it should appear as Line. The side effect of this change can be that users can expect the wrong control name in their scripts or programs while now we return the correct one. Probably, these defines should use get_unaligned_le16 and friends. Signed-off-by: Julian Anastasov Cc: Signed-off-by: Takashi Iwai --- sound/usb/usbaudio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 8e7f78941ba6..e9a3a9dca15c 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -210,7 +210,7 @@ struct snd_usb_midi_endpoint_info { /* */ -#define combine_word(s) ((*s) | ((unsigned int)(s)[1] << 8)) +#define combine_word(s) ((*(s)) | ((unsigned int)(s)[1] << 8)) #define combine_triple(s) (combine_word(s) | ((unsigned int)(s)[2] << 16)) #define combine_quad(s) (combine_triple(s) | ((unsigned int)(s)[3] << 24)) From 1a6969788ef2d5bc3169eee59def6b267182f136 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 7 Nov 2009 09:49:04 +0100 Subject: [PATCH 214/743] ALSA: hda - Don't initialize CORB/RIRB for single_cmd mode So far, CORB/RIRB still remains even if the driver is switched to the single_cmd mode. The specification says that this should be disabled, but I hoped this isn't the case; indeed most devices worked together with CORB/RIRB. However, Poulsbo (US15W) seems problematic with this setup, and it requires to disable CORB/RIRB when single_cmd is used. Now this patch disables CORB/RIRB initialization when the single_cmd mode is used. Also the unsolicited event is disabled because it can't work without RIRB. Reported-and-tested-by: Troy Kisky Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index e340792f6cb3..6517f589d01d 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -722,9 +722,10 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus, chip->last_cmd[addr]); chip->single_cmd = 1; bus->response_reset = 0; - /* re-initialize CORB/RIRB */ + /* release CORB/RIRB */ azx_free_cmd_io(chip); - azx_init_cmd_io(chip); + /* disable unsolicited responses */ + azx_writel(chip, GCTL, azx_readl(chip, GCTL) & ~ICH6_GCTL_UNSOL); return -1; } @@ -865,7 +866,9 @@ static int azx_reset(struct azx *chip) } /* Accept unsolicited responses */ - azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UNSOL); + if (!chip->single_cmd) + azx_writel(chip, GCTL, azx_readl(chip, GCTL) | + ICH6_GCTL_UNSOL); /* detect codecs */ if (!chip->codec_mask) { @@ -980,7 +983,8 @@ static void azx_init_chip(struct azx *chip) azx_int_enable(chip); /* initialize the codec command I/O */ - azx_init_cmd_io(chip); + if (!chip->single_cmd) + azx_init_cmd_io(chip); /* program the position buffer */ azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr); From 3806e94b0148350c72f9a3214274026b6ca03f49 Mon Sep 17 00:00:00 2001 From: Crane Cai Date: Sat, 7 Nov 2009 13:10:46 +0100 Subject: [PATCH 215/743] i2c-piix4: Modify code name SB900 to Hudson-2 Change SB900 to its formal code name Hudson-2. Signed-off-by: Crane Cai Signed-off-by: Jean Delvare --- Documentation/i2c/busses/i2c-piix4 | 2 +- drivers/i2c/busses/Kconfig | 2 +- drivers/i2c/busses/i2c-piix4.c | 8 ++++---- include/linux/pci_ids.h | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4 index c5b37c570554..ac540c71c7eb 100644 --- a/Documentation/i2c/busses/i2c-piix4 +++ b/Documentation/i2c/busses/i2c-piix4 @@ -8,7 +8,7 @@ Supported adapters: Datasheet: Only available via NDA from ServerWorks * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges Datasheet: Not publicly available - * AMD SB900 + * AMD Hudson-2 Datasheet: Not publicly available * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge Datasheet: Publicly available at the SMSC website http://www.smsc.com diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 737335ff2b21..e8fe7f169e25 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -128,7 +128,7 @@ config I2C_PIIX4 ATI SB600 ATI SB700 ATI SB800 - AMD SB900 + AMD Hudson-2 Serverworks OSB4 Serverworks CSB5 Serverworks CSB6 diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index d26a972aacaa..1e245e9cad31 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -22,7 +22,7 @@ Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 ATI IXP200, IXP300, IXP400, SB600, SB700, SB800 - AMD SB900 + AMD Hudson-2 SMSC Victory66 Note: we assume there can only be one device, with one SMBus interface. @@ -233,9 +233,9 @@ static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev, unsigned short smba_idx = 0xcd6; u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c; - /* SB800 SMBus does not support forcing address */ + /* SB800 and later SMBus does not support forcing address */ if (force || force_addr) { - dev_err(&PIIX4_dev->dev, "SB800 SMBus does not support " + dev_err(&PIIX4_dev->dev, "SMBus does not support " "forcing address!\n"); return -EINVAL; } @@ -480,7 +480,7 @@ static struct pci_device_id piix4_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) }, - { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index b0f0f3851cd4..9ceb392cb984 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -543,7 +543,7 @@ #define PCI_DEVICE_ID_AMD_8131_BRIDGE 0x7450 #define PCI_DEVICE_ID_AMD_8131_APIC 0x7451 #define PCI_DEVICE_ID_AMD_8132_BRIDGE 0x7458 -#define PCI_DEVICE_ID_AMD_SB900_SMBUS 0x780b +#define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b #define PCI_DEVICE_ID_AMD_CS5535_IDE 0x208F #define PCI_DEVICE_ID_AMD_CS5536_ISA 0x2090 #define PCI_DEVICE_ID_AMD_CS5536_FLASH 0x2091 From afa08974fe80c198b8650f73ed8ab59135ca10d0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 7 Nov 2009 13:10:46 +0100 Subject: [PATCH 216/743] i2c: Add an interface to lock/unlock an I2C bus segment Some drivers need to be able to prevent access to an I2C bus segment for a specific period of time. Add an interface for them to do so without twiddling with i2c-core internals. Signed-off-by: Jean Delvare Acked-by: Ben Hutchings --- drivers/net/sfc/sfe4001.c | 4 ++-- include/linux/i2c.h | 18 ++++++++++++++++++ 2 files changed, 20 insertions(+), 2 deletions(-) diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index cee00ad49b57..49eb91b5f50c 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -188,7 +188,7 @@ static int sfn4111t_reset(struct efx_nic *efx) efx_oword_t reg; /* GPIO 3 and the GPIO register are shared with I2C, so block that */ - mutex_lock(&efx->i2c_adap.bus_lock); + i2c_lock_adapter(&efx->i2c_adap); /* Pull RST_N (GPIO 2) low then let it up again, setting the * FLASH_CFG_1 strap (GPIO 3) appropriately. Only change the @@ -204,7 +204,7 @@ static int sfn4111t_reset(struct efx_nic *efx) falcon_write(efx, ®, GPIO_CTL_REG_KER); msleep(1); - mutex_unlock(&efx->i2c_adap.bus_lock); + i2c_unlock_adapter(&efx->i2c_adap); ssleep(1); return 0; diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 57d41b0abce2..7b40cda57a70 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -361,6 +361,24 @@ static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data) dev_set_drvdata(&dev->dev, data); } +/** + * i2c_lock_adapter - Prevent access to an I2C bus segment + * @adapter: Target I2C bus segment + */ +static inline void i2c_lock_adapter(struct i2c_adapter *adapter) +{ + mutex_lock(&adapter->bus_lock); +} + +/** + * i2c_unlock_adapter - Reauthorize access to an I2C bus segment + * @adapter: Target I2C bus segment + */ +static inline void i2c_unlock_adapter(struct i2c_adapter *adapter) +{ + mutex_unlock(&adapter->bus_lock); +} + /*flags for the client struct: */ #define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */ #define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */ From 2b5d9946bc6bfdfa489f099eb59bcc15f8ae5afa Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 27 Sep 2009 19:11:34 -0300 Subject: [PATCH 217/743] V4L/DVB (13048): dib0070: fix build dependency when driver is disabled Fix build dependency on function, dib0070_ctrl_agc_filter [mchehab@redhat.com: reverted the quick workaround 3f48258e50ef4] Signed-off-by: Michael Krufky Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/Kconfig | 2 +- drivers/media/dvb/frontends/dib0070.h | 7 ++++++- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 9744b0692417..0e4b97fba384 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -75,7 +75,7 @@ config DVB_USB_DIB0700 select DVB_DIB3000MC if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_LGDT3305 if !DVB_FE_CUSTOMISE - select DVB_TUNER_DIB0070 + select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h index 8a2e1e710adb..eec9e52ffa75 100644 --- a/drivers/media/dvb/frontends/dib0070.h +++ b/drivers/media/dvb/frontends/dib0070.h @@ -51,6 +51,7 @@ struct dib0070_config { #if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE)) extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg); extern u16 dib0070_wbd_offset(struct dvb_frontend *); +extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, u8 open); #else static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg) { @@ -63,7 +64,11 @@ static inline u16 dib0070_wbd_offset(struct dvb_frontend *fe) printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return -ENODEV; } + +static inline void dib0070_ctrl_agc_filter(struct dvb_frontend *fe, u8 open) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} #endif -extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, u8 open); #endif From 1e13c8f0c97c883287b1940719d0040fd38fcd58 Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Sat, 19 Sep 2009 05:24:40 -0300 Subject: [PATCH 218/743] V4L/DVB (13050): DIB0700: fix-up USB device ID for Terratec/Leadtek git commit db48138f6bc4d2b613b08731ffc8b319432ebc25 changed by accident the assignment of certain USB IDs to their device-specific-handlers. Thanks to Edward Sheldrake for finding this regression Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 0b2812aa30a4..6bd8951ea02b 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1925,7 +1925,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { { NULL }, }, { "Leadtek Winfast DTV Dongle (STK7700P based)", - { &dib0700_usb_id_table[8] }, + { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] }, { NULL }, }, { "AVerMedia AVerTV DVB-T Express", @@ -2064,7 +2064,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 12, + .num_device_descs = 11, .devices = { { "DiBcom STK7070P reference design", { &dib0700_usb_id_table[15], NULL }, @@ -2098,11 +2098,6 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[30], NULL }, { NULL }, }, - { "Terratec Cinergy T USB XXS/ T3", - { &dib0700_usb_id_table[33], - &dib0700_usb_id_table[52], NULL }, - { NULL }, - }, { "Elgato EyeTV DTT", { &dib0700_usb_id_table[49], NULL }, { NULL }, @@ -2343,8 +2338,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[59], NULL }, { NULL }, }, - { "Terratec Cinergy T USB XXS (HD)", - { &dib0700_usb_id_table[34], &dib0700_usb_id_table[60] }, + { "Terratec Cinergy T USB XXS (HD)/ T3", + { &dib0700_usb_id_table[33], + &dib0700_usb_id_table[52], + &dib0700_usb_id_table[60], NULL}, { NULL }, }, }, From 7646b9de26c54cf4bc9c446d7ada9f91ece31e0a Mon Sep 17 00:00:00 2001 From: Martin Samek Date: Wed, 30 Sep 2009 22:59:09 -0300 Subject: [PATCH 219/743] V4L/DVB (13079): dib0700: fixed xc2028 firmware loading kernel oops Fixing kernel oops when driver attemps to load xc2028 firmware. Note by djh: the patch contribute by Martin is a port of a fix I made during the PCTV 340e development. It's a temporary workaround that fixes a regression (an OOPS condition) and the real fix should be in the code that manages the i2c master on the dib7000p. But this fix does address the immmediate regression and should be merged upstream until we do a cleaner fix. Signed-off-by: Martin Samek Signed-off-by: Devin Heitmueller CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/dib7000p.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c index 55ef6eeb0769..0781f94e05d2 100644 --- a/drivers/media/dvb/frontends/dib7000p.c +++ b/drivers/media/dvb/frontends/dib7000p.c @@ -1375,6 +1375,11 @@ struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, if (dib7000p_identify(st) != 0) goto error; + /* FIXME: make sure the dev.parent field is initialized, or else + request_firmware() will hit an OOPS (this should be moved somewhere + more common) */ + st->i2c_master.gated_tuner_i2c_adap.dev.parent = i2c_adap->dev.parent; + dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr); dib7000p_demod_reset(st); From 4d8317876d5f53ef792e90f89d8f162d7bca5c81 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 27 Sep 2009 14:05:12 -0300 Subject: [PATCH 220/743] V4L/DVB (13107): tda18271: fix overflow in FM radio frequency calculation Multiplication by 62500 causes an overflow in the 32 bit freq variable, which is later divided by 1000 when using FM radio. This patch prevents the overflow by scaling the frequency value correctly upfront. Thanks to Henk Vergonet for spotting the problem and providing a preliminary patch, which this changeset was based upon. Cc: Henk Vergonet Signed-off-by: Michael Krufky CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda18271-fe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index 64595112000d..cccaf164a8f9 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -1000,12 +1000,12 @@ static int tda18271_set_analog_params(struct dvb_frontend *fe, struct tda18271_std_map_item *map; char *mode; int ret; - u32 freq = params->frequency * 62500; + u32 freq = params->frequency * 125 * + ((params->mode == V4L2_TUNER_RADIO) ? 1 : 1000) / 2; priv->mode = TDA18271_ANALOG; if (params->mode == V4L2_TUNER_RADIO) { - freq = freq / 1000; map = &std_map->fm_radio; mode = "fm"; } else if (params->std & V4L2_STD_MN) { From a57c1dcb93e43357ed3f666e5a2b5d5071dd3930 Mon Sep 17 00:00:00 2001 From: Seth Barry Date: Sun, 27 Sep 2009 16:42:29 -0300 Subject: [PATCH 221/743] V4L/DVB (13109): tda18271: fix signedness issue in tda18271_rf_tracking_filters_init While having tda18271 module set with debug=17 (cal & info prints) and cal=0 (delay calibration process until first use) - I discovered that during the calibration process, if the frequency test for 69750000 returned a bcal of 0 (see tda18721-fe.c in tda18271_powerscan func) that the tuner wouldn't be able to pickup any of the frequencies in the range (all the other frequencies bands returned bcal=1). I spent some time going over the code and the NXP's tda18271 spec (ver.4 of it i think) and adding a lot of debug prints and walking/stepping through the calibration process. I found that when the powerscan fails to find a frequency, the rf calibration is not run and the default value is supposed to be used in its place (pulled from the RF_CAL_map table) - but something was getting goofed up there. Now, my c coding skills are very rusty, but i think root of the problem is a signedness issue with the math operation for calculating the rf_a1 and rf_a2 values in tda18271_rf_tracking_filters_init func, which results in values like 20648 for rf_a1 (when it should probably have a value like 0, or so slightly negative that it should be zero - this bad value for rf_a1 would in turn makes the approx calc within tda18271c2_rf_tracking_filters_correction go out of whack). The simplest solution i found was to explicitly convert the signedness of the denominator to avoid the implicit conversion. The values placed into the u32 rf_freq array should never exceed about 900mhz, so i think the s32 max value shouldn't be an issue in this case. I've tested it out a little, and even when i get a bcal=0 with the modified code, the default calibration value gets used, rf_a1 is zero, and the tuner seems to lock on the stream and mythtv seems to play it fine. Signed-off-by: Seth Barry Signed-off-by: Michael Krufky CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda18271-fe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index cccaf164a8f9..3a50ce96fcb9 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -616,13 +616,13 @@ static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq) case RF2: map[i].rf_a1 = (prog_cal[RF2] - prog_tab[RF2] - prog_cal[RF1] + prog_tab[RF1]) / - ((rf_freq[RF2] - rf_freq[RF1]) / 1000); + (s32)((rf_freq[RF2] - rf_freq[RF1]) / 1000); map[i].rf2 = rf_freq[RF2] / 1000; break; case RF3: map[i].rf_a2 = (prog_cal[RF3] - prog_tab[RF3] - prog_cal[RF2] + prog_tab[RF2]) / - ((rf_freq[RF3] - rf_freq[RF2]) / 1000); + (s32)((rf_freq[RF3] - rf_freq[RF2]) / 1000); map[i].rf_b2 = prog_cal[RF2] - prog_tab[RF2]; map[i].rf3 = rf_freq[RF3] / 1000; break; From 1381dfd5150cfbdb5fa55ce7ab5ab56812111909 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 4 Oct 2009 14:04:47 -0300 Subject: [PATCH 222/743] V4L/DVB (13122): gscpa - stv06xx + ov518: dont discard every other frame When we call gspca_frame_add, it returns a pointer to the frame passed in, unless we call it with LAST_PACKET, when it will return a pointer to a new frame in which to store the frame data for the next frame. The frame pointer was not updated in stv06xx and ov518. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov519.c | 2 +- drivers/media/video/gspca/stv06xx/stv06xx.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 2f6e135d94bc..a5c190e93799 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -2919,7 +2919,7 @@ static void ov518_pkt_scan(struct gspca_dev *gspca_dev, /* A false positive here is likely, until OVT gives me * the definitive SOF/EOF format */ if ((!(data[0] | data[1] | data[2] | data[3] | data[5])) && data[6]) { - gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); + frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0); sd->packet_nr = 0; } diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c index 65489d6b0d89..bfae63f5584c 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx.c +++ b/drivers/media/video/gspca/stv06xx/stv06xx.c @@ -394,7 +394,8 @@ frame_data: PDEBUG(D_PACK, "End of frame detected"); /* Complete the last frame (if any) */ - gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); + frame = gspca_frame_add(gspca_dev, LAST_PACKET, + frame, data, 0); if (chunk_len) PDEBUG(D_ERR, "Chunk length is " From 8cf1fec877c102beeae1e13624b1f7d20abbf8f9 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 5 Oct 2009 12:51:47 -0300 Subject: [PATCH 223/743] V4L/DVB (13129): sh_mobile_ceu_camera: fix cropping for scaling clients Fix a bug in cropping calculation, when the client is also scaling the image. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/sh_mobile_ceu_camera.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 65ac474c517a..2f78b4f263f5 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -1173,8 +1173,8 @@ static int get_scales(struct soc_camera_device *icd, width_in = scale_up(cam->ceu_rect.width, *scale_h); height_in = scale_up(cam->ceu_rect.height, *scale_v); - *scale_h = calc_generic_scale(cam->ceu_rect.width, icd->user_width); - *scale_v = calc_generic_scale(cam->ceu_rect.height, icd->user_height); + *scale_h = calc_generic_scale(width_in, icd->user_width); + *scale_v = calc_generic_scale(height_in, icd->user_height); return 0; } From 07bc46e6671b4533a5e56607ddec9de9079c1844 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 5 Oct 2009 12:54:34 -0300 Subject: [PATCH 224/743] V4L/DVB (13131): pxa_camera: fix camera pixel format configuration A missed conversion prevents correct pixel format negotiation with client drivers. Reported-by: Antonio Ospite Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pxa_camera.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 6952e9602d5d..aa831d53cf28 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -1432,7 +1432,9 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd, icd->sense = &sense; cam_f.fmt.pix.pixelformat = cam_fmt->fourcc; - ret = v4l2_subdev_call(sd, video, s_fmt, f); + ret = v4l2_subdev_call(sd, video, s_fmt, &cam_f); + cam_f.fmt.pix.pixelformat = pix->pixelformat; + *pix = cam_f.fmt.pix; icd->sense = NULL; From 76823b791d867c2ab563c237f188d0cbb4ced6e1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 5 Oct 2009 12:54:54 -0300 Subject: [PATCH 225/743] V4L/DVB (13132): fix use-after-free Oops, resulting from a driver-core API change Commit b4028437876866aba4747a655ede00f892089e14 has broken again re-use of device objects across device_register() / device_unregister() cycles. Fix soc-camera by nullifying the struct after device_unregister(). Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/soc_camera.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index 59aa7a3694c2..36e617bd13c7 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -1160,13 +1160,15 @@ void soc_camera_host_unregister(struct soc_camera_host *ici) if (icd->iface == ici->nr) { /* The bus->remove will be called */ device_unregister(&icd->dev); - /* Not before device_unregister(), .remove - * needs parent to call ici->ops->remove() */ - icd->dev.parent = NULL; - - /* If the host module is loaded again, device_register() - * would complain "already initialised" */ - memset(&icd->dev.kobj, 0, sizeof(icd->dev.kobj)); + /* + * Not before device_unregister(), .remove + * needs parent to call ici->ops->remove(). + * If the host module is loaded again, device_register() + * would complain "already initialised," since 2.6.32 + * this is also needed to prevent use-after-free of the + * device private data. + */ + memset(&icd->dev, 0, sizeof(icd->dev)); } } From e0a7e8a621666f9ce1373270bae061f92a2a2b87 Mon Sep 17 00:00:00 2001 From: HIRANO Takahito Date: Sun, 20 Sep 2009 08:57:49 -0300 Subject: [PATCH 226/743] V4L/DVB (13167): pt1: Fix a compile error on arm The lack of #include caused a compile error on some architectures. Signed-off-by: HIRANO Takahito Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/pt1/pt1.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/dvb/pt1/pt1.c b/drivers/media/dvb/pt1/pt1.c index 81e623a90f09..1fd8306371e2 100644 --- a/drivers/media/dvb/pt1/pt1.c +++ b/drivers/media/dvb/pt1/pt1.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "dvbdev.h" #include "dvb_demux.h" From 66349b4e7ab3825dbfc167a5f0309792a587adb7 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 21 Sep 2009 12:09:08 -0300 Subject: [PATCH 227/743] V4L/DVB (13169): bttv: Fix potential out-of-order field processing There is a subtle interaction in the bttv driver which can result in fields being repeatedly processed out of order. This is a problem specifically when running in V4L2_FIELD_ALTERNATE mode (probably the most common case). 1. The determination of which fields are associated with which buffers happens in videobuf, before the bttv driver gets a chance to queue the corresponding DMA. Thus by the point when the DMA is queued for a given buffer, the algorithm has to do the queuing based on the buffer's already assigned field type - not based on which field is "next" in the video stream. 2. The driver normally tries to queue both the top and bottom fields at the same time (see bttv_irq_next_video()). It tries to sort out top vs bottom by looking at the field type for the next 2 available buffers and assigning them appropriately. 3. However the bttv driver *always* actually processes the top field first. There's even an interrupt set aside for specifically recognizing when the top field has been processed so that it can be marked done even while the bottom field is still being DMAed. Given all of the above, if one gets into a situation where bttv_irq_next_video() gets entered when the first available buffer has been pre-associated as a bottom field, then the function is going to process the buffers out of order. That first available buffer will be put into the bottom field slot and the buffer after that will be put into the top field slot. Problem is, since the top field is always processed first by the driver, then that second buffer (the one after the first available buffer) will be the first one to be finished. Because of the strict fifo handling of all video buffers, then that top field won't be seen by the app until after the bottom field is also processed. Worse still, the app will get back the chronologically later bottom field first, *before* the top field is received. The buffer's timestamps will even be backwards. While not fatal to most TV apps, this behavior can subtlely degrade userspace deinterlacing (probably will cause jitter). That's probably why it has gone unnoticed. But it will also cause serious problems if the app in question discards all but the latest received buffer (a latency minimizing tactic) - causing one field to only ever be displayed since the other is now always late. Unfortunately once you get into this state, you're stuck this way - because having consumed two buffers, now the next time around the "first" available buffer will again be a bottom field and the same thing happens. How can we get into this state? In a perfect world, where there's always a few free buffers queued to the driver, it should be impossible. However if something disrupts streaming, e.g. if the userspace app can't queue free buffers fast enough for a moment due perhaps to a CPU scheduling glitch, then the driver can get momentarily starved and some number of fields will be dropped. That's OK. But if an odd number of fields get dropped, then that "first" available buffer might be the bottom field and now we're stuck... This patch fixes that problem by deliberately only setting up a single field for one frame if we don't get a top field as the first available buffer. By purposely skipping the other field, then we only handle a single buffer thus bringing things back into proper sync (i.e. top field first) for the next frame. To do this we just drop the few lines in bttv_irq_next_video() that attempt to set up the second buffer when that second buffer isn't for the bottom field. This is definitely a problem in when in V4L2_FIELD_ALTERNATE mode. In the other modes this change either has no effect or doesn't harm things any further anyway. Signed-off-by: Mike Isely CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-driver.c | 31 +++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 939d1e512974..3ff84c8185a9 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -3800,11 +3800,34 @@ bttv_irq_next_video(struct bttv *btv, struct bttv_buffer_set *set) if (!V4L2_FIELD_HAS_BOTH(item->vb.field) && (item->vb.queue.next != &btv->capture)) { item = list_entry(item->vb.queue.next, struct bttv_buffer, vb.queue); + /* Mike Isely - Only check + * and set up the bottom field in the logic + * below. Don't ever do the top field. This + * of course means that if we set up the + * bottom field in the above code that we'll + * actually skip a field. But that's OK. + * Having processed only a single buffer this + * time, then the next time around the first + * available buffer should be for a top field. + * That will then cause us here to set up a + * top then a bottom field in the normal way. + * The alternative to this understanding is + * that we set up the second available buffer + * as a top field, but that's out of order + * since this driver always processes the top + * field first - the effect will be the two + * buffers being returned in the wrong order, + * with the second buffer also being delayed + * by one field time (owing to the fifo nature + * of videobuf). Worse still, we'll be stuck + * doing fields out of order now every time + * until something else causes a field to be + * dropped. By effectively forcing a field to + * drop this way then we always get back into + * sync within a single frame time. (Out of + * order fields can screw up deinterlacing + * algorithms.) */ if (!V4L2_FIELD_HAS_BOTH(item->vb.field)) { - if (NULL == set->top && - V4L2_FIELD_TOP == item->vb.field) { - set->top = item; - } if (NULL == set->bottom && V4L2_FIELD_BOTTOM == item->vb.field) { set->bottom = item; From 2de26c0a4a218a351bb1970eeaddf2905b47ff13 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 21 Sep 2009 12:42:22 -0300 Subject: [PATCH 228/743] V4L/DVB (13170): bttv: Fix reversed polarity error when switching video standard The bttv driver function which handles switching of the video standard (set_tvnorm() in bttv-driver.c) includes a check which can optionally also reset the cropping configuration to a default value. It is "optional" based on a comparison of the cropcap parameters of the previous vs the newly requested video standard. The comparison is being done with a memcmp(), a function which only returns a true value if the comparison actually fails. This if-statement appears to have been written to assume wrong memcmp() semantics. That is, it was re-initializing the cropping configuration only if the new video standard did NOT have different cropcap values. That doesn't make any sense. One definitely should reset things if the cropcap parameters are different - if there's any comparison to made at all. The effect of this problem was that a transition from, say, PAL to NTSC would leave in place old cropping setup that made sense for the PAL geometry but not for NTSC. If the application doesn't care about cropping it also won't try to reset the cropping configuration, resulting in an improperly cropped video frame. In the case I was testing this actually caused black video frames to be displayed. Another interesting effect of this bug is that if one does something which does NOT change the video standard and this function is run, then the cropping setup gets reset anyway - again because of the backwards comparison. It turns out that just running anything which merely opens and closes the video device node (e.g. v4l-info) will cause this to happen. One can argue that simply opening the device node and not doing anything to it should not mess with any of its state - but because of this behavior, any TV app which does such things (e.g. xawtv) probably therefore doesn't see the problem. The solution is to fix the sense of the if-statement. It's easy to see how this mistake could have been made given how memcmp() works. The patch is therefore removal of a single "!" character from the if-statement in set_tvnorm in bttv-driver.c. Signed-off-by: Mike Isely CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 3ff84c8185a9..a6724019c66f 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -1299,7 +1299,7 @@ set_tvnorm(struct bttv *btv, unsigned int norm) tvnorm = &bttv_tvnorms[norm]; - if (!memcmp(&bttv_tvnorms[btv->tvnorm].cropcap, &tvnorm->cropcap, + if (memcmp(&bttv_tvnorms[btv->tvnorm].cropcap, &tvnorm->cropcap, sizeof (tvnorm->cropcap))) { bttv_crop_reset(&btv->crop[0], norm); btv->crop[1] = btv->crop[0]; /* current = default */ From 96fbf771d86a90ff006bc62ca4d4de6474b3de31 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Thu, 15 Oct 2009 01:14:34 -0300 Subject: [PATCH 229/743] V4L/DVB (13190): em28xx: fix panic that can occur when starting audio streaming Because the counters were not reset when starting up streaming, they would be reused from the previous run. This can result in cases such that when the second instance of streaming starts up, the "cnt" variable in em28xx_audio_isocirq() can end up being negative, resulting in attempting to write to memory before the start of runtime->dma_area (as well as having a negative number of bytes to copy). Signed-off-by: Devin Heitmueller CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 7bd8a70f0a0b..ac947aecb9c3 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -383,6 +383,11 @@ static int snd_em28xx_hw_capture_free(struct snd_pcm_substream *substream) static int snd_em28xx_prepare(struct snd_pcm_substream *substream) { + struct em28xx *dev = snd_pcm_substream_chip(substream); + + dev->adev.hwptr_done_capture = 0; + dev->adev.capture_transfer_done = 0; + return 0; } From 78c948ab0cc44f9c8ae397d7d9d217bb498bfa2f Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 21 Oct 2009 18:27:29 -0300 Subject: [PATCH 230/743] V4L/DVB (13202): smsusb: add autodetection support for three additional Hauppauge USB IDs Add support for three new Hauppauge Device USB IDs: 2040:b900 2040:b910 2040:c000 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/siano/smsusb.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c index cb8a358b7310..8f88a586b0dd 100644 --- a/drivers/media/dvb/siano/smsusb.c +++ b/drivers/media/dvb/siano/smsusb.c @@ -529,6 +529,12 @@ struct usb_device_id smsusb_id_table[] = { .driver_info = SMS1XXX_BOARD_SIANO_NICE }, { USB_DEVICE(0x187f, 0x0301), .driver_info = SMS1XXX_BOARD_SIANO_VENICE }, + { USB_DEVICE(0x2040, 0xb900), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, + { USB_DEVICE(0x2040, 0xb910), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, + { USB_DEVICE(0x2040, 0xc000), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, { } /* Terminating entry */ }; From 1f95725755ab67f3198df3b5bf7517f926f310ca Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Wed, 23 Sep 2009 18:06:57 -0300 Subject: [PATCH 231/743] V4L/DVB (13230): s2255drv: Don't conditionalize video buffer completion on waiting processes The s2255 driver had logic which aborted processing of a video frame if there was no process waiting on the video buffer in question. That simply doesn't work when the application is doing things in an asynchronous manner. If the application went to the trouble to queue the buffer in the first place, then the driver should always attempt to complete it - even if the application at that moment has its attention turned elsewhere. Applications which always blocked waiting for I/O on the capture device would not have been affected by this. Applications which *mostly* blocked waiting for I/O on the capture device probably only would have been somewhat affected (frame lossage, at a rate which goes up as the application blocks less). Applications which never blocked on the capture device (e.g. polling only) however would never have been able to receive any video frames, since in that case this "is anyone waiting on this?" check on the buffer never would have evalutated true. This patch just deletes that harmful check against the buffer's wait queue. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab CC: stable@kernel.org --- drivers/media/video/s2255drv.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index 9e3262c0ba37..2c0bb06cab3b 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -598,11 +598,6 @@ static int s2255_got_frame(struct s2255_dev *dev, int chn, int jpgsize) buf = list_entry(dma_q->active.next, struct s2255_buffer, vb.queue); - if (!waitqueue_active(&buf->vb.done)) { - /* no one active */ - rc = -1; - goto unlock; - } list_del(&buf->vb.queue); do_gettimeofday(&buf->vb.ts); dprintk(100, "[%p/%d] wakeup\n", buf, buf->vb.i); From c94115ffc4d76089b26eee4d1cb56f1f6b631bd2 Mon Sep 17 00:00:00 2001 From: Henrik Kurelid Date: Sat, 3 Oct 2009 05:37:58 -0300 Subject: [PATCH 232/743] V4L/DVB (13237): firedtv: length field corrupt in ca2host if length>127 This solves a problem in firedtv that has become major for Swedish DVB-T users the last month or so. It will most likely solve issues seen by other users as well. If the length of an AVC message is greater than 127, the length field should be encoded in LV mode instead of V mode. V mode can only be used if the length is 127 or less. This patch ensures that the CA_PMT message is always encoded in LV mode so PMT message of greater lengths can be supported. Signed-off-by: Henrik Kurelid Signed-off-by: Stefan Richter Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/firewire/firedtv-avc.c | 38 +++++++++++++----------- 1 file changed, 20 insertions(+), 18 deletions(-) diff --git a/drivers/media/dvb/firewire/firedtv-avc.c b/drivers/media/dvb/firewire/firedtv-avc.c index d1b67fe0f011..485d061319ab 100644 --- a/drivers/media/dvb/firewire/firedtv-avc.c +++ b/drivers/media/dvb/firewire/firedtv-avc.c @@ -1050,28 +1050,28 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length) c->operand[4] = 0; /* slot */ c->operand[5] = SFE_VENDOR_TAG_CA_PMT; /* ca tag */ c->operand[6] = 0; /* more/last */ - /* c->operand[7] = XXXprogram_info_length + 17; */ /* length */ - c->operand[8] = list_management; - c->operand[9] = 0x01; /* pmt_cmd=OK_descramble */ + /* Use three bytes for length field in case length > 127 */ + c->operand[10] = list_management; + c->operand[11] = 0x01; /* pmt_cmd=OK_descramble */ /* TS program map table */ - c->operand[10] = 0x02; /* Table id=2 */ - c->operand[11] = 0x80; /* Section syntax + length */ - /* c->operand[12] = XXXprogram_info_length + 12; */ - c->operand[13] = msg[1]; /* Program number */ - c->operand[14] = msg[2]; - c->operand[15] = 0x01; /* Version number=0 + current/next=1 */ - c->operand[16] = 0x00; /* Section number=0 */ - c->operand[17] = 0x00; /* Last section number=0 */ - c->operand[18] = 0x1f; /* PCR_PID=1FFF */ - c->operand[19] = 0xff; - c->operand[20] = (program_info_length >> 8); /* Program info length */ - c->operand[21] = (program_info_length & 0xff); + c->operand[12] = 0x02; /* Table id=2 */ + c->operand[13] = 0x80; /* Section syntax + length */ + /* c->operand[14] = XXXprogram_info_length + 12; */ + c->operand[15] = msg[1]; /* Program number */ + c->operand[16] = msg[2]; + c->operand[17] = 0x01; /* Version number=0 + current/next=1 */ + c->operand[18] = 0x00; /* Section number=0 */ + c->operand[19] = 0x00; /* Last section number=0 */ + c->operand[20] = 0x1f; /* PCR_PID=1FFF */ + c->operand[21] = 0xff; + c->operand[22] = (program_info_length >> 8); /* Program info length */ + c->operand[23] = (program_info_length & 0xff); /* CA descriptors at programme level */ read_pos = 6; - write_pos = 22; + write_pos = 24; if (program_info_length > 0) { pmt_cmd_id = msg[read_pos++]; if (pmt_cmd_id != 1 && pmt_cmd_id != 4) @@ -1113,8 +1113,10 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length) c->operand[write_pos++] = 0x00; c->operand[write_pos++] = 0x00; - c->operand[7] = write_pos - 8; - c->operand[12] = write_pos - 13; + c->operand[7] = 0x82; + c->operand[8] = (write_pos - 10) >> 8; + c->operand[9] = (write_pos - 10) & 0xff; + c->operand[14] = write_pos - 15; crc32_csum = crc32_be(0, &c->operand[10], c->operand[12] - 1); c->operand[write_pos - 4] = (crc32_csum >> 24) & 0xff; From dcff9cfe432c74b382cea327509ede2e114b1615 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 17 Oct 2009 17:46:25 -0300 Subject: [PATCH 233/743] V4L/DVB (13240): firedtv: fix regression: tuning fails due to bogus error return Since 2.6.32(-rc1), DVB core checks the return value of dvb_frontend_ops.set_frontend. Now it becomes apparent that firedtv always returned a bogus value from its set_frontend method. CC: stable@kernel.org Signed-off-by: Stefan Richter Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/firewire/firedtv-fe.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/media/dvb/firewire/firedtv-fe.c b/drivers/media/dvb/firewire/firedtv-fe.c index 7ba43630a25d..e49cdc88b0c7 100644 --- a/drivers/media/dvb/firewire/firedtv-fe.c +++ b/drivers/media/dvb/firewire/firedtv-fe.c @@ -141,18 +141,12 @@ static int fdtv_read_uncorrected_blocks(struct dvb_frontend *fe, u32 *ucblocks) return -EOPNOTSUPP; } -#define ACCEPTED 0x9 - static int fdtv_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { struct firedtv *fdtv = fe->sec_priv; - /* FIXME: avc_tuner_dsd never returns ACCEPTED. Check status? */ - if (avc_tuner_dsd(fdtv, params) != ACCEPTED) - return -EINVAL; - else - return 0; /* not sure of this... */ + return avc_tuner_dsd(fdtv, params); } static int fdtv_get_frontend(struct dvb_frontend *fe, From b6ef8836c1ff5199abd40cfba162052bc7e8af00 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Andr=C3=A9n?= Date: Sun, 27 Sep 2009 10:11:43 -0300 Subject: [PATCH 234/743] V4L/DVB (13255): gspca - m5602-s5k4aa: Add vflip quirk for the Bruneinit laptop MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adds a vflip quirk for the Bruneinit laptop. Thanks to Jörg for the report Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/m5602/m5602_s5k4aa.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index 59400e858965..f580b614f8bf 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -35,6 +35,13 @@ static const struct dmi_system_id s5k4aa_vflip_dmi_table[] = { { + .ident = "BRUNEINIT", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "BRUNENIT"), + DMI_MATCH(DMI_PRODUCT_NAME, "BRUNENIT"), + DMI_MATCH(DMI_BOARD_VERSION, "00030D0000000001") + } + }, { .ident = "Fujitsu-Siemens Amilo Xa 2528", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), From 2339a1887dab469bb4bae56aa7eca3a5e05ecde7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Andr=C3=A9n?= Date: Sun, 27 Sep 2009 10:20:21 -0300 Subject: [PATCH 235/743] V4L/DVB (13256): gspca - m5602-s5k4aa: Add another MSI GX700 vflip quirk MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adds another vflip quirk for the MSI GX700. Thanks to John Katzmaier for reporting. Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/m5602/m5602_s5k4aa.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index f580b614f8bf..ef4ae684d33f 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -59,6 +59,13 @@ static DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2548") } + }, { + .ident = "MSI GX700", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"), + DMI_MATCH(DMI_PRODUCT_NAME, "GX700"), + DMI_MATCH(DMI_BIOS_DATE, "12/02/2008") + } }, { .ident = "MSI GX700", .matches = { From 81191f694cb507c49d3c7aa6238dcc0a83ad4001 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Andr=C3=A9n?= Date: Sat, 3 Oct 2009 10:01:41 -0300 Subject: [PATCH 236/743] V4L/DVB (13257): gspca - m5602-s5k4aa: Add vflip for Fujitsu Amilo Xi 2528 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adds a vflip quirk for the Fujitsu Amilo Xi 2528. Thanks to Evgeny for the report. Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/m5602/m5602_s5k4aa.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index ef4ae684d33f..a27afeb6f39b 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -47,6 +47,12 @@ static DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xa 2528") } + }, { + .ident = "Fujitsu-Siemens Amilo Xi 2528", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 2528") + } }, { .ident = "Fujitsu-Siemens Amilo Xi 2550", .matches = { From 32345b059676169444d8d3c4a59009adcdf93885 Mon Sep 17 00:00:00 2001 From: Theodore Kilgore Date: Sun, 1 Nov 2009 12:59:42 -0300 Subject: [PATCH 237/743] V4L/DVB (13264): gspca_mr97310a: Change vstart for CIF sensor type 1 cams gspca_mr97310a: Change vstart for CIF sensor type 1 cams This fixes the distortion at the end of the frame, and avoids the bad frame dropping done because of this distortion, trippling the framerate! Signed-off-by: Theodore Kilgore Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/mr97310a.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/mr97310a.c b/drivers/media/video/gspca/mr97310a.c index 140c8f320e47..f8328b9efae5 100644 --- a/drivers/media/video/gspca/mr97310a.c +++ b/drivers/media/video/gspca/mr97310a.c @@ -483,7 +483,7 @@ static int start_cif_cam(struct gspca_dev *gspca_dev) data[3] = 0x2c; /* reg 2, H size/8 */ data[4] = 0x48; /* reg 3, V size/4 */ data[6] = 0x06; /* reg 5, H start */ - data[8] = 0x06 + sd->sensor_type; /* reg 7, V start */ + data[8] = 0x06 - sd->sensor_type; /* reg 7, V start */ break; } err_code = mr_write(gspca_dev, 11); From d514edac5df2149207f1ae2f52de63882c692eec Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 4 Nov 2009 14:18:04 -0300 Subject: [PATCH 238/743] V4L/DVB (13286): pxa-camera: Fix missing sched.h Required for wakeup call. Signed-off-by: Jonathan Cameron Acked-by: Guennadi Liakhovetski Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pxa_camera.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index aa831d53cf28..51b683c63b70 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include From 7157fbd0ed1a00024fb915cfa5ed93fb4ce9dfaf Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 4 Nov 2009 15:26:59 -0300 Subject: [PATCH 239/743] V4L/DVB (13287): ce6230 - saa7164-cmd: Fix wrong sizeof Which is why I have always preferred sizeof(struct foo) over sizeof(var). Cc: Antti Palosaari Acked-by: Steven Toth Signed-off-by: Jean Delvare Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/ce6230.c | 2 +- drivers/media/video/saa7164/saa7164-cmd.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/ce6230.c b/drivers/media/dvb/dvb-usb/ce6230.c index 0737c6377892..3df2045b7d2d 100644 --- a/drivers/media/dvb/dvb-usb/ce6230.c +++ b/drivers/media/dvb/dvb-usb/ce6230.c @@ -105,7 +105,7 @@ static int ce6230_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int i = 0; struct req_t req; int ret = 0; - memset(&req, 0, sizeof(&req)); + memset(&req, 0, sizeof(req)); if (num > 2) return -EINVAL; diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c index c45966edc0cf..9c1d3ac43869 100644 --- a/drivers/media/video/saa7164/saa7164-cmd.c +++ b/drivers/media/video/saa7164/saa7164-cmd.c @@ -347,7 +347,7 @@ int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, tmComResCmd_t command, /* Prepare some basic command/response structures */ memset(&command_t, 0, sizeof(command_t)); - memset(&response_t, 0, sizeof(&response_t)); + memset(&response_t, 0, sizeof(response_t)); pcommand_t = &command_t; presponse_t = &response_t; command_t.id = id; From a2e35af6c756b5fa827fec5e0431cf2ce449beef Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 4 Nov 2009 11:09:12 -0300 Subject: [PATCH 240/743] V4L/DVB (13309): uvcvideo: Ignore the FIX_BANDWIDTH for compressed video The FIX_BANDWIDTH quirk tries to work around cameras requesting the maximum bandwidth regardless of the image size by computing a bandwidth estimate. This works only for uncompressed frames. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_video.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index f960e8ea4f17..a6e41d12b221 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -90,7 +90,8 @@ static void uvc_fixup_video_ctrl(struct uvc_streaming *stream, ctrl->dwMaxVideoFrameSize = frame->dwMaxVideoFrameBufferSize; - if (stream->dev->quirks & UVC_QUIRK_FIX_BANDWIDTH && + if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) && + stream->dev->quirks & UVC_QUIRK_FIX_BANDWIDTH && stream->intf->num_altsetting > 1) { u32 interval; u32 bandwidth; From 2e8961330ec4b558a0f4db18ab5fb566842f492b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 4 Nov 2009 13:11:10 -0300 Subject: [PATCH 241/743] V4L/DVB (13311): uvcvideo: Fix compilation warning with 2.6.32 due to type mismatch with abs() The abs() macro has changed in 2.6.32 and returns a long instead of an int. Fix the driver to avoid compilation warnings. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_ctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index c3225a561748..1b89735e62fd 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -348,7 +348,7 @@ static void uvc_ctrl_set_zoom(struct uvc_control_mapping *mapping, __s32 value, __u8 *data) { data[0] = value == 0 ? 0 : (value > 0) ? 1 : 0xff; - data[2] = min(abs(value), 0xff); + data[2] = min((int)abs(value), 0xff); } static struct uvc_control_mapping uvc_ctrl_mappings[] = { From 4007a672abd88091e3cced158ec491d41c0c454c Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 4 Nov 2009 14:19:35 -0300 Subject: [PATCH 242/743] V4L/DVB (13313): saa7134: add support for FORCE_TS_VALID mode for mpeg ts input When FORCE_TS_VALID mode is enabled, the saa713x will accept MPEG TS input without requiring TS_VALID set high. This is required for some new boards to function properly, due to the hardware design implementation. The configuration is toggled within the board setup configuration. Boards that do not have this bit set will function as before with no change. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-ts.c | 6 ++++-- drivers/media/video/saa7134/saa7134.h | 1 + 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/video/saa7134/saa7134-ts.c index 3fa652279ac0..03488ba4c99c 100644 --- a/drivers/media/video/saa7134/saa7134-ts.c +++ b/drivers/media/video/saa7134/saa7134-ts.c @@ -262,11 +262,13 @@ int saa7134_ts_start(struct saa7134_dev *dev) switch (saa7134_boards[dev->board].ts_type) { case SAA7134_MPEG_TS_PARALLEL: saa_writeb(SAA7134_TS_SERIAL0, 0x40); - saa_writeb(SAA7134_TS_PARALLEL, 0xec); + saa_writeb(SAA7134_TS_PARALLEL, 0xec | + (saa7134_boards[dev->board].ts_force_val << 4)); break; case SAA7134_MPEG_TS_SERIAL: saa_writeb(SAA7134_TS_SERIAL0, 0xd8); - saa_writeb(SAA7134_TS_PARALLEL, 0x6c); + saa_writeb(SAA7134_TS_PARALLEL, 0x6c | + (saa7134_boards[dev->board].ts_force_val << 4)); saa_writeb(SAA7134_TS_PARALLEL_SERIAL, 0xbc); saa_writeb(SAA7134_TS_SERIAL1, 0x02); break; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 6ee3e9b7769e..f8697d46ff5f 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -360,6 +360,7 @@ struct saa7134_board { enum saa7134_mpeg_type mpeg; enum saa7134_mpeg_ts_type ts_type; unsigned int vid_port_opts; + unsigned int ts_force_val:1; }; #define card_has_radio(dev) (NULL != saa7134_boards[dev->board].radio.name) From 22370ef5035f206283505409c9a64a595c5c7320 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 4 Nov 2009 14:23:57 -0300 Subject: [PATCH 243/743] V4L/DVB (13314): saa7134: set ts_force_val for the Hauppauge WinTV HVR-1150 The Hauppauge WinTV HVR-1150 retail boards require the FORCE_TS_VALID bit to be set in order to function properly. This change will work on the early revisions on the board as well, but the final revision will not function without this change. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-cards.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 71145bff94fa..09013229d4aa 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -3428,6 +3428,7 @@ struct saa7134_board saa7134_boards[] = { .tuner_config = 3, .mpeg = SAA7134_MPEG_DVB, .ts_type = SAA7134_MPEG_TS_SERIAL, + .ts_force_val = 1, .gpiomask = 0x0800100, /* GPIO 21 is an INPUT */ .inputs = {{ .name = name_tv, From e7e7e0c084ef862d5754701108d4a038514d6314 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Sat, 7 Nov 2009 11:16:13 +0800 Subject: [PATCH 244/743] genirq: try_one_irq() must be called with irq disabled Prarit reported: ================================= [ INFO: inconsistent lock state ] 2.6.32-rc5 #1 --------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&irq_desc_lock_class){?.-...}, at: [] try_one_irq+0x32/0x138 {IN-HARDIRQ-W} state was registered at: [] __lock_acquire+0x2fc/0xd5d [] lock_acquire+0xf3/0x12d [] _spin_lock+0x40/0x89 [] handle_level_irq+0x30/0x105 [] handle_irq+0x95/0xb7 [] do_IRQ+0x6a/0xe0 [] ret_from_intr+0x0/0x16 irq event stamp: 195096 hardirqs last enabled at (195096): [] _spin_unlock_irq+0x3a/0x5c hardirqs last disabled at (195095): [] _spin_lock_irq+0x29/0x95 softirqs last enabled at (195088): [] __do_softirq+0x1c1/0x1ef softirqs last disabled at (195093): [] call_softirq+0x1c/0x30 other info that might help us debug this: 1 lock held by swapper/0: #0: (kernel/irq/spurious.c:21){+.-...}, at: [] run_timer_softirq+0x1a9/0x315 stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.32-rc5 #1 Call Trace: [] valid_state+0x187/0x1ae [] mark_lock+0x129/0x253 [] __lock_acquire+0x370/0xd5d [] lock_acquire+0xf3/0x12d [] _spin_lock+0x40/0x89 [] try_one_irq+0x32/0x138 [] poll_all_shared_irqs+0x41/0x6d [] poll_spurious_irqs+0x1c/0x49 [] run_timer_softirq+0x239/0x315 [] __do_softirq+0x102/0x1ef [] call_softirq+0x1c/0x30 [] do_softirq+0x59/0xca [] irq_exit+0x58/0xae [] smp_apic_timer_interrupt+0x94/0xba [] apic_timer_interrupt+0x13/0x20 The reason is that try_one_irq() is called from hardirq context with interrupts disabled and from softirq context (poll_all_shared_irqs()) with interrupts enabled. Disable interrupts before calling it from poll_all_shared_irqs(). Reported-and-tested-by: Prarit Bhargava Signed-off-by: Yong Zhang LKML-Reference: <1257563773-4620-1-git-send-email-yong.zhang0@gmail.com> Signed-off-by: Thomas Gleixner --- kernel/irq/spurious.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c index 114e704760fe..bd7273e6282e 100644 --- a/kernel/irq/spurious.c +++ b/kernel/irq/spurious.c @@ -121,7 +121,9 @@ static void poll_all_shared_irqs(void) if (!(status & IRQ_SPURIOUS_DISABLED)) continue; + local_irq_disable(); try_one_irq(i, desc); + local_irq_enable(); } } From 35f029e2514be209eb0e88c7d927f3bcc42a5cc2 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 7 Nov 2009 14:49:18 +0100 Subject: [PATCH 245/743] [ARM] kirkwood: fix PCI I/O port assignment Instead of allocating PCI devices I/O port bus addresses from the 000xxxxx I/O port range as intended, due to a bus versus physical address mixup, the Kirkwood PCIe handling code inadvertently allocated I/O port bus addresses from the f20xxxxx address range (which is the physical address range of the PCIe I/O mapping window), but then direct all I/O port accesses to bus addresses 000xxxxx, which would then not be decoded at all. Fix this by setting the base address of the PCIe I/O space struct resource to KIRKWOOD_PCIE_IO_BUS_BASE instead of the incorrect KIRKWOOD_PCIE_IO_PHYS_BASE, and fix up __io() to expect addresses offsetted by the former instead of the latter. (The suggested fix of directing I/O port accesses from the host to bus addresses f20xxxxx instead has the problem that assigning full 32bit I/O port bus addresses (f20xxxxx) doesn't work on all PCI devices, as not all PCI devices implement full 32 bit BAR registers for I/O ports. We should really try to allocate I/O port bus addresses that fit in 16 bits.) Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/include/mach/io.h | 2 +- arch/arm/mach-kirkwood/pcie.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h index a643a846d5fb..44e8be04f259 100644 --- a/arch/arm/mach-kirkwood/include/mach/io.h +++ b/arch/arm/mach-kirkwood/include/mach/io.h @@ -15,7 +15,7 @@ static inline void __iomem *__io(unsigned long addr) { - return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE) + return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE) + KIRKWOOD_PCIE_IO_VIRT_BASE); } diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 553882033006..0660e78641e8 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -115,7 +115,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) */ res[0].name = "PCIe I/O Space"; res[0].flags = IORESOURCE_IO; - res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE; + res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE; res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1; if (request_resource(&ioport_resource, &res[0])) panic("Request PCIe IO resource failed\n"); From a1897fa67cb964cc6b5a9048a31eb6ef3dcc2dda Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 7 Nov 2009 14:50:00 +0100 Subject: [PATCH 246/743] [ARM] Kirkwood: clarify PCIe MEM bus/physical address distinction Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/addr-map.c | 2 +- arch/arm/mach-kirkwood/include/mach/kirkwood.h | 1 + arch/arm/mach-kirkwood/pcie.c | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c index 1da5d1c18ecb..2e69168fc699 100644 --- a/arch/arm/mach-kirkwood/addr-map.c +++ b/arch/arm/mach-kirkwood/addr-map.c @@ -105,7 +105,7 @@ void __init kirkwood_setup_cpu_mbus(void) setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE, TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE); setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE, - TARGET_PCIE, ATTR_PCIE_MEM, -1); + TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE); /* * Setup window for NAND controller. diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index 54c132731d2d..a15cf0ee22bd 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -43,6 +43,7 @@ #define KIRKWOOD_REGS_SIZE SZ_1M #define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 +#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000 #define KIRKWOOD_PCIE_MEM_SIZE SZ_128M /* diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 0660e78641e8..a604b2a701aa 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -126,7 +126,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) */ res[1].name = "PCIe Memory Space"; res[1].flags = IORESOURCE_MEM; - res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE; + res[1].start = KIRKWOOD_PCIE_MEM_BUS_BASE; res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1; if (request_resource(&iomem_resource, &res[1])) panic("Request PCIe Memory resource failed\n"); From ffbfe093b660ce1c9ede569ebe4f969f9003aa59 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 7 Nov 2009 20:36:02 -0500 Subject: [PATCH 247/743] [ARM] Kirkwood: update defconfig Signed-off-by: Nicolas Pitre --- arch/arm/configs/kirkwood_defconfig | 262 ++++++++++++++++++---------- 1 file changed, 170 insertions(+), 92 deletions(-) diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index af74cc2de8b6..bcfade33bca9 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -1,15 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc4 -# Mon May 4 11:58:57 2009 +# Linux kernel version: 2.6.32-rc6 +# Sat Nov 7 20:31:18 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=19 # CONFIG_GROUP_SCHED is not set @@ -73,7 +71,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -86,6 +83,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y @@ -95,13 +96,17 @@ CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -114,7 +119,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -135,19 +140,22 @@ CONFIG_DEFAULT_IOSCHED="cfq" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -156,25 +164,27 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set CONFIG_ARCH_KIRKWOOD=y -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_BCMRING is not set # # Marvell Kirkwood Implementations @@ -185,6 +195,7 @@ CONFIG_MACH_RD88F6281=y CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_SHEEVAPLUG=y CONFIG_MACH_TS219=y +CONFIG_MACH_OPENRD_BASE=y CONFIG_PLAT_ORION=y # @@ -195,7 +206,7 @@ CONFIG_CPU_FEROCEON=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_FEROCEON=y CONFIG_CPU_TLB_FEROCEON=y @@ -211,6 +222,7 @@ CONFIG_ARM_THUMB=y CONFIG_OUTER_CACHE=y CONFIG_CACHE_FEROCEON_L2=y # CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 # # Bus support @@ -235,11 +247,12 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -254,10 +267,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +CONFIG_UACCESS_WITH_MEMCPY=y # # Boot options @@ -345,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -367,6 +383,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,17 +400,18 @@ CONFIG_NET_PKTGEN=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y CONFIG_CFG80211=y +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_DEFAULT_PS_VALUE=1 +# CONFIG_CFG80211_DEBUGFS is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=y # CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=y - -# -# Rate control algorithm selection -# CONFIG_MAC80211_RC_MINSTREL=y # CONFIG_MAC80211_RC_DEFAULT_PID is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y @@ -414,6 +432,7 @@ CONFIG_MAC80211_RC_DEFAULT="minstrel" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -425,9 +444,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -494,6 +513,7 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_DATAFLASH is not set CONFIG_MTD_M25P80=y CONFIG_M25PXX_USE_FAST_READ=y +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -543,6 +563,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -567,10 +588,6 @@ CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -587,6 +604,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -595,6 +614,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -611,7 +631,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -623,11 +642,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -649,6 +671,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -676,6 +699,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -693,13 +717,16 @@ CONFIG_SATA_MV=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -768,6 +795,9 @@ CONFIG_NET_PCI=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -789,6 +819,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set @@ -797,10 +828,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=y CONFIG_LIBERTAS=y @@ -820,9 +848,7 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_MAC80211_HWSIM is not set # CONFIG_MWL8K is not set # CONFIG_P54_COMMON is not set -# CONFIG_ATH5K is not set -# CONFIG_ATH9K is not set -# CONFIG_AR9170_USB is not set +# CONFIG_ATH_COMMON is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set # CONFIG_IWLWIFI is not set @@ -832,6 +858,8 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set # CONFIG_HERMES is not set +# CONFIG_WL12XX is not set +# CONFIG_IWM is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -855,6 +883,7 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -878,13 +907,19 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -943,6 +978,7 @@ CONFIG_LEGACY_PTY_COUNT=16 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -998,10 +1034,6 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1023,11 +1055,47 @@ CONFIG_SPI_ORION=y # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1041,33 +1109,28 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1087,7 +1150,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1106,10 +1168,12 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y # CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1123,9 +1187,14 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y # CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=y +# CONFIG_SMARTJOYPLUS_FF is not set CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y # CONFIG_THRUSTMASTER_FF is not set +CONFIG_HID_ZEROPLUS=y # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -1150,18 +1219,21 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1252,11 +1324,14 @@ CONFIG_SDIO_UART=y # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set # CONFIG_MMC_TIFM_SD is not set CONFIG_MMC_MVSDIO=y # CONFIG_MMC_SPI is not set +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_VIA_SDMMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1266,7 +1341,7 @@ CONFIG_LEDS_CLASS=y # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO_PLATFORM=y -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_BD2802 is not set @@ -1278,11 +1353,14 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # iptables trigger is under Netfilter config (LED target) # +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1314,6 +1392,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1325,6 +1404,7 @@ CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1360,8 +1440,11 @@ CONFIG_DMA_ENGINE=y # CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1379,10 +1462,13 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1455,7 +1541,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1530,6 +1615,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1547,6 +1633,7 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1567,12 +1654,14 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set @@ -1581,25 +1670,12 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1623,7 +1699,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1665,11 +1740,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1714,6 +1791,7 @@ CONFIG_CRYPTO_ARC4=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_MV_CESA=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_BINARY_PRINTF=y From 3293576c6b7104cdac9c2d10d35abd86b02d7264 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 7 Nov 2009 20:59:20 -0500 Subject: [PATCH 248/743] [ARM] orion5x: update defconfig Signed-off-by: Nicolas Pitre --- arch/arm/configs/orion5x_defconfig | 280 ++++++++++++++++++----------- 1 file changed, 177 insertions(+), 103 deletions(-) diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 9e2385293ecb..5383cd0dff54 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,15 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc4 -# Mon May 4 14:07:25 2009 +# Linux kernel version: 2.6.32-rc6 +# Sat Nov 7 20:52:21 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -69,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -82,6 +79,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set @@ -91,13 +92,17 @@ CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y @@ -109,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -130,19 +135,22 @@ CONFIG_DEFAULT_IOSCHED="cfq" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -151,25 +159,27 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set CONFIG_ARCH_ORION5X=y +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_BCMRING is not set # # Orion Implementations @@ -187,6 +197,9 @@ CONFIG_MACH_WRT350N_V2=y CONFIG_MACH_TS78XX=y CONFIG_MACH_MV2120=y CONFIG_MACH_EDMINI_V2=y +CONFIG_MACH_D2NET=y +CONFIG_MACH_BIGDISK=y +CONFIG_MACH_NET2BIG=y CONFIG_MACH_MSS2=y CONFIG_MACH_WNR854T=y CONFIG_MACH_RD88F5181L_GE=y @@ -202,7 +215,7 @@ CONFIG_CPU_FEROCEON=y CONFIG_CPU_FEROCEON_OLD_ID=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_FEROCEON=y CONFIG_CPU_TLB_FEROCEON=y @@ -215,7 +228,7 @@ CONFIG_CPU_CP15_MMU=y CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 # # Bus support @@ -240,11 +253,12 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -259,12 +273,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_LEDS=y CONFIG_LEDS_CPU=y CONFIG_ALIGNMENT_TRAP=y +CONFIG_UACCESS_WITH_MEMCPY=y # # Boot options @@ -308,6 +324,7 @@ CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_SUSPEND is not set # CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -356,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -378,6 +396,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -394,11 +413,15 @@ CONFIG_NET_PKTGEN=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -411,6 +434,7 @@ CONFIG_WIRELESS_EXT_SYSFS=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -422,9 +446,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -537,6 +561,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set @@ -552,7 +577,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -576,10 +603,6 @@ CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -596,6 +619,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -604,6 +629,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -620,7 +646,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -632,11 +657,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -658,6 +686,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -685,6 +714,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -703,13 +733,16 @@ CONFIG_SATA_MV=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -777,6 +810,8 @@ CONFIG_NET_PCI=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -798,6 +833,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set @@ -806,10 +842,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -835,6 +868,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -855,13 +889,19 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -912,6 +952,7 @@ CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -967,20 +1008,55 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1030,6 +1106,8 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1041,9 +1119,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1057,33 +1133,26 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # +# CONFIG_VGA_ARB is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1097,7 +1166,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1116,10 +1184,11 @@ CONFIG_USB_HID=y # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EZKEY is not set # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set @@ -1130,10 +1199,11 @@ CONFIG_USB_HID=y # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SUNPLUS is not set -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1160,18 +1230,21 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1248,7 +1321,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1258,7 +1330,7 @@ CONFIG_LEDS_CLASS=y # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO_PLATFORM=y -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_BD2802 is not set @@ -1269,11 +1341,14 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # iptables trigger is under Netfilter config (LED target) # +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1306,6 +1381,7 @@ CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1344,8 +1420,11 @@ CONFIG_DMA_ENGINE=y # CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1358,10 +1437,10 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set CONFIG_EXT4_FS=m -# CONFIG_EXT4DEV_COMPAT is not set CONFIG_EXT4_FS_XATTR=y # CONFIG_EXT4_FS_POSIX_ACL is not set # CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=m @@ -1370,10 +1449,13 @@ CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1446,7 +1528,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1537,6 +1618,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1552,6 +1634,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1572,6 +1655,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set @@ -1579,6 +1663,7 @@ CONFIG_FRAME_POINTER=y # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y @@ -1587,25 +1672,12 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1629,20 +1701,19 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_ALGAPI2=m -CONFIG_CRYPTO_AEAD2=m +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_BLKCIPHER2=m -CONFIG_CRYPTO_HASH2=m -CONFIG_CRYPTO_RNG2=m -CONFIG_CRYPTO_PCOMP=m +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_MANAGER2=m +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set -CONFIG_CRYPTO_WORKQUEUE=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1670,11 +1741,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1691,7 +1764,7 @@ CONFIG_CRYPTO_PCBC=m # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set @@ -1719,6 +1792,7 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_MV_CESA=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_BINARY_PRINTF=y From f37325a956f0ee4356793da7d93c699a25b21d92 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 22:13:39 +0000 Subject: [PATCH 249/743] ALSA: snd-aica: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Signed-off-by: Takashi Iwai --- sound/sh/aica.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/sh/aica.c b/sound/sh/aica.c index 583a3693df75..a0df401ebb9f 100644 --- a/sound/sh/aica.c +++ b/sound/sh/aica.c @@ -49,6 +49,7 @@ MODULE_AUTHOR("Adrian McMenamin "); MODULE_DESCRIPTION("Dreamcast AICA sound (pcm) driver"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{Yamaha/SEGA, AICA}}"); +MODULE_FIRMWARE("aica_firmware.bin"); /* module parameters */ #define CARD_NAME "AICA" From 88b938e63e68fd35e603421f722be0f35dde1016 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 8 Nov 2009 00:26:56 -0800 Subject: [PATCH 250/743] sparc64: replace parentheses in pmul() `>>' has a higher precedence than `?' so src2 evaluated to either 16 or 0 dependent on the bits set in rs2. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- arch/sparc/kernel/visemul.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc/kernel/visemul.c b/arch/sparc/kernel/visemul.c index b956fd71c131..d231cbd5c526 100644 --- a/arch/sparc/kernel/visemul.c +++ b/arch/sparc/kernel/visemul.c @@ -617,7 +617,7 @@ static void pmul(struct pt_regs *regs, unsigned int insn, unsigned int opf) rs2 = fps_regval(f, RS2(insn)); rd_val = 0; - src2 = (rs2 >> (opf == FMUL8x16AU_OPF) ? 16 : 0); + src2 = rs2 >> (opf == FMUL8x16AU_OPF ? 16 : 0); for (byte = 0; byte < 4; byte++) { u16 src1 = (rs1 >> (byte * 8)) & 0x00ff; u32 prod = src1 * src2; From 6755aebaaf9fc5416acfd4578ab7a1e122ecbc74 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 6 Nov 2009 00:23:01 +0000 Subject: [PATCH 251/743] can: should not use __dev_get_by_index() without locks bcm_proc_getifname() is called with RTNL and dev_base_lock not held. It calls __dev_get_by_index() without locks, and this is illegal (might crash) Close the race by holding dev_base_lock and copying dev->name in the protected section. Signed-off-by: Eric Dumazet Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller --- net/can/bcm.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/net/can/bcm.c b/net/can/bcm.c index 597da4f8f888..e8d58f33fe09 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -132,23 +132,27 @@ static inline struct bcm_sock *bcm_sk(const struct sock *sk) /* * procfs functions */ -static char *bcm_proc_getifname(int ifindex) +static char *bcm_proc_getifname(char *result, int ifindex) { struct net_device *dev; if (!ifindex) return "any"; - /* no usage counting */ + read_lock(&dev_base_lock); dev = __dev_get_by_index(&init_net, ifindex); if (dev) - return dev->name; + strcpy(result, dev->name); + else + strcpy(result, "???"); + read_unlock(&dev_base_lock); - return "???"; + return result; } static int bcm_proc_show(struct seq_file *m, void *v) { + char ifname[IFNAMSIZ]; struct sock *sk = (struct sock *)m->private; struct bcm_sock *bo = bcm_sk(sk); struct bcm_op *op; @@ -157,7 +161,7 @@ static int bcm_proc_show(struct seq_file *m, void *v) seq_printf(m, " / sk %p", sk); seq_printf(m, " / bo %p", bo); seq_printf(m, " / dropped %lu", bo->dropped_usr_msgs); - seq_printf(m, " / bound %s", bcm_proc_getifname(bo->ifindex)); + seq_printf(m, " / bound %s", bcm_proc_getifname(ifname, bo->ifindex)); seq_printf(m, " <<<\n"); list_for_each_entry(op, &bo->rx_ops, list) { @@ -169,7 +173,7 @@ static int bcm_proc_show(struct seq_file *m, void *v) continue; seq_printf(m, "rx_op: %03X %-5s ", - op->can_id, bcm_proc_getifname(op->ifindex)); + op->can_id, bcm_proc_getifname(ifname, op->ifindex)); seq_printf(m, "[%d]%c ", op->nframes, (op->flags & RX_CHECK_DLC)?'d':' '); if (op->kt_ival1.tv64) @@ -194,7 +198,8 @@ static int bcm_proc_show(struct seq_file *m, void *v) list_for_each_entry(op, &bo->tx_ops, list) { seq_printf(m, "tx_op: %03X %s [%d] ", - op->can_id, bcm_proc_getifname(op->ifindex), + op->can_id, + bcm_proc_getifname(ifname, op->ifindex), op->nframes); if (op->kt_ival1.tv64) From 53a0ef866dc379e577794819d0b8ade5ba338e3a Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Fri, 6 Nov 2009 23:53:13 +0000 Subject: [PATCH 252/743] can: fix WARN_ON dump in net/core/rtnetlink.c:rtmsg_ifinfo() On older kernels, e.g. 2.6.27, a WARN_ON dump in rtmsg_ifinfo() is thrown when the CAN device is registered due to insufficient skb space, as reported by various users. This patch adds the rtnl_link_ops "get_size" to fix the problem. I think this patch is required for more recent kernels as well, even if no WARN_ON dumps are triggered. Maybe we also need "get_xstats_size" for the CAN xstats. Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/dev.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index f0b9a1e1db46..564e31c9fee4 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -589,6 +589,22 @@ static int can_changelink(struct net_device *dev, return 0; } +static size_t can_get_size(const struct net_device *dev) +{ + struct can_priv *priv = netdev_priv(dev); + size_t size; + + size = nla_total_size(sizeof(u32)); /* IFLA_CAN_STATE */ + size += sizeof(struct can_ctrlmode); /* IFLA_CAN_CTRLMODE */ + size += nla_total_size(sizeof(u32)); /* IFLA_CAN_RESTART_MS */ + size += sizeof(struct can_bittiming); /* IFLA_CAN_BITTIMING */ + size += sizeof(struct can_clock); /* IFLA_CAN_CLOCK */ + if (priv->bittiming_const) /* IFLA_CAN_BITTIMING_CONST */ + size += sizeof(struct can_bittiming_const); + + return size; +} + static int can_fill_info(struct sk_buff *skb, const struct net_device *dev) { struct can_priv *priv = netdev_priv(dev); @@ -639,6 +655,7 @@ static struct rtnl_link_ops can_link_ops __read_mostly = { .setup = can_setup, .newlink = can_newlink, .changelink = can_changelink, + .get_size = can_get_size, .fill_info = can_fill_info, .fill_xstats = can_fill_xstats, }; From 2606289779cb297320a185db5997729d29b6700b Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Fri, 6 Nov 2009 08:50:28 +0000 Subject: [PATCH 253/743] net/fsl_pq_mdio: add module license GPL or it will taint the kernel and fail to load becuase of_address_to_resource() is GPL only. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: David S. Miller --- drivers/net/fsl_pq_mdio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c index 6ac464866972..efbf67689eca 100644 --- a/drivers/net/fsl_pq_mdio.c +++ b/drivers/net/fsl_pq_mdio.c @@ -427,3 +427,4 @@ void fsl_pq_mdio_exit(void) of_unregister_platform_driver(&fsl_pq_mdio_driver); } module_exit(fsl_pq_mdio_exit); +MODULE_LICENSE("GPL"); From 5399dd1fc8f5e812db931225ef5f67d89f3b1a56 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Sat, 7 Nov 2009 18:45:16 +0900 Subject: [PATCH 254/743] nilfs2: fix kernel oops in error case of nilfs_ioctl_move_blocks This fixes a kernel oops reported by Markus Trippelsdorf in the email titled "[NILFS users] kernel Oops while running nilfs_cleanerd". The oops was caused by a bug of error path in nilfs_ioctl_move_blocks() function, which was inlined in nilfs_ioctl_clean_segments(). nilfs_ioctl_move_blocks checks duplication of blocks which will be moved in garbage collection. But, the check should have be done within nilfs_ioctl_move_inode_block() to prevent list corruption among buffers storing the target blocks. To fix the kernel oops, this moves forward the duplication check before the list insertion. I also tested this for stable trees [2.6.30, 2.6.31]. Reported-by: Markus Trippelsdorf Signed-off-by: Ryusuke Konishi Cc: stable --- fs/nilfs2/ioctl.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index 6572ea4bc4df..89dd73ead9ac 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -297,7 +297,18 @@ static int nilfs_ioctl_move_inode_block(struct inode *inode, (unsigned long long)vdesc->vd_vblocknr); return ret; } - bh->b_private = vdesc; + if (unlikely(!list_empty(&bh->b_assoc_buffers))) { + printk(KERN_CRIT "%s: conflicting %s buffer: ino=%llu, " + "cno=%llu, offset=%llu, blocknr=%llu, vblocknr=%llu\n", + __func__, vdesc->vd_flags ? "node" : "data", + (unsigned long long)vdesc->vd_ino, + (unsigned long long)vdesc->vd_cno, + (unsigned long long)vdesc->vd_offset, + (unsigned long long)vdesc->vd_blocknr, + (unsigned long long)vdesc->vd_vblocknr); + brelse(bh); + return -EEXIST; + } list_add_tail(&bh->b_assoc_buffers, buffers); return 0; } @@ -335,24 +346,10 @@ static int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs, list_for_each_entry_safe(bh, n, &buffers, b_assoc_buffers) { ret = nilfs_gccache_wait_and_mark_dirty(bh); if (unlikely(ret < 0)) { - if (ret == -EEXIST) { - vdesc = bh->b_private; - printk(KERN_CRIT - "%s: conflicting %s buffer: " - "ino=%llu, cno=%llu, offset=%llu, " - "blocknr=%llu, vblocknr=%llu\n", - __func__, - vdesc->vd_flags ? "node" : "data", - (unsigned long long)vdesc->vd_ino, - (unsigned long long)vdesc->vd_cno, - (unsigned long long)vdesc->vd_offset, - (unsigned long long)vdesc->vd_blocknr, - (unsigned long long)vdesc->vd_vblocknr); - } + WARN_ON(ret == -EEXIST); goto failed; } list_del_init(&bh->b_assoc_buffers); - bh->b_private = NULL; brelse(bh); } return nmembs; @@ -360,7 +357,6 @@ static int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs, failed: list_for_each_entry_safe(bh, n, &buffers, b_assoc_buffers) { list_del_init(&bh->b_assoc_buffers); - bh->b_private = NULL; brelse(bh); } return ret; From c083234f1592ef3fad3d8083663c5e4a357ec77c Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Sun, 8 Nov 2009 12:09:24 +0900 Subject: [PATCH 255/743] nilfs2: fix missing cleanup of gc cache on error cases This fixes an -rc1 regression brought by the commit: 1cf58fa840472ec7df6bf2312885949ebb308853 ("nilfs2: shorten freeze period due to GC in write operation v3"). Although the patch moved out a function call of nilfs_ioctl_move_blocks() to nilfs_ioctl_clean_segments() from nilfs_ioctl_prepare_clean_segments(), it didn't move corresponding cleanup job needed for the error case. This will move the missing cleanup job to the destination function. Signed-off-by: Ryusuke Konishi Acked-by: Jiro SEKIBA --- fs/nilfs2/ioctl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index 89dd73ead9ac..d24057d58f17 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -467,7 +467,6 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs, return 0; failed: - nilfs_remove_all_gcinode(nilfs); printk(KERN_ERR "NILFS: GC failed during preparation: %s: err=%d\n", msg, ret); return ret; @@ -556,6 +555,8 @@ static int nilfs_ioctl_clean_segments(struct inode *inode, struct file *filp, else ret = nilfs_clean_segments(inode->i_sb, argv, kbufs); + if (ret < 0) + nilfs_remove_all_gcinode(nilfs); clear_nilfs_gc_running(nilfs); out_free: From 968c86458a5975efa7a95f832a4ec9fb21471137 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 6 Nov 2009 15:31:08 -0800 Subject: [PATCH 256/743] sched: Fix kernel-doc function parameter name Fix variable name in sched.c kernel-doc notation. Fixes this DocBook warning: Warning(kernel/sched.c:2008): No description found for parameter 'p' Warning(kernel/sched.c:2008): Excess function parameter 'k' description in 'kthread_bind' Signed-off-by: Randy Dunlap LKML-Reference: <4AF4B1BC.8020604@oracle.com> Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 28dd4f490bfc..7d7d5fcca4cb 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1994,7 +1994,7 @@ static inline void check_class_changed(struct rq *rq, struct task_struct *p, /** * kthread_bind - bind a just-created kthread to a cpu. - * @k: thread created by kthread_create(). + * @p: thread created by kthread_create(). * @cpu: cpu (might not be online, must be possible) for @k to run on. * * Description: This function is equivalent to set_cpus_allowed(), From de2a47cf2b3f59ef9664b277f4021b91af13598e Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Thu, 5 Nov 2009 10:43:51 +0800 Subject: [PATCH 257/743] x86: Fix error return sequence in __ioremap_caller() kernel missed to free memtype if get_vm_area_caller failed in __ioremap_caller. This patch introduces error path to fix this and cleans up the repetitive error return sequences that contributed to the creation of the bug. Signed-off-by: Xiaotian Feng Acked-by: Suresh Siddha Cc: Venkatesh Pallipadi Cc: H. Peter Anvin LKML-Reference: <1257389031-20429-1-git-send-email-dfeng@redhat.com> Signed-off-by: Ingo Molnar --- arch/x86/mm/ioremap.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 334e63ca7b2b..2feb9bdedaaf 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -170,8 +170,7 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, (unsigned long long)phys_addr, (unsigned long long)(phys_addr + size), prot_val, new_prot_val); - free_memtype(phys_addr, phys_addr + size); - return NULL; + goto err_free_memtype; } prot_val = new_prot_val; } @@ -197,26 +196,25 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, */ area = get_vm_area_caller(size, VM_IOREMAP, caller); if (!area) - return NULL; + goto err_free_memtype; area->phys_addr = phys_addr; vaddr = (unsigned long) area->addr; - if (kernel_map_sync_memtype(phys_addr, size, prot_val)) { - free_memtype(phys_addr, phys_addr + size); - free_vm_area(area); - return NULL; - } + if (kernel_map_sync_memtype(phys_addr, size, prot_val)) + goto err_free_area; - if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) { - free_memtype(phys_addr, phys_addr + size); - free_vm_area(area); - return NULL; - } + if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) + goto err_free_area; ret_addr = (void __iomem *) (vaddr + offset); mmiotrace_ioremap(unaligned_phys_addr, unaligned_size, ret_addr); return ret_addr; +err_free_area: + free_vm_area(area); +err_free_memtype: + free_memtype(phys_addr, phys_addr + size); + return NULL; } /** From 158bc5af3d49be49c33dc06ff90c4f754c7d4f1b Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 7 Nov 2009 07:35:06 +0100 Subject: [PATCH 258/743] ARM: 5784/1: fix early boot machine ID mismatch error display That code was refactored a long time ago, but one particular label didn't get adjusted properly which broke the listing of supported machines. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/head-common.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 885a7214418d..b9505aa267c0 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -97,7 +97,7 @@ __error_a: bl printhex8 adr r0, str_a2 bl printascii - adr r3, 3f + adr r3, 4f ldmia r3, {r4, r5, r6} @ get machine desc list sub r4, r3, r4 @ get offset between virt&phys add r5, r5, r4 @ convert virt addresses to From e9036b36eed4d3cdb33fa9cbcdd9888ae516889f Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Mon, 26 Oct 2009 22:24:14 +0300 Subject: [PATCH 259/743] sched: Use root_task_group_empty only with FAIR_GROUP_SCHED root_task_group_empty is used only with FAIR_GROUP_SCHED so if we use other scheduler options we get: kernel/sched.c:314: warning: 'root_task_group_empty' defined but not used So move CONFIG_FAIR_GROUP_SCHED up that it covers root_task_group_empty(). Signed-off-by: Cyrill Gorcunov Cc: Peter Zijlstra LKML-Reference: <20091026192414.GB5321@lenovo> Signed-off-by: Ingo Molnar --- kernel/sched.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 7d7d5fcca4cb..3c11ae0a948d 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -309,6 +309,8 @@ static DEFINE_PER_CPU_SHARED_ALIGNED(struct rt_rq, init_rt_rq); */ static DEFINE_SPINLOCK(task_group_lock); +#ifdef CONFIG_FAIR_GROUP_SCHED + #ifdef CONFIG_SMP static int root_task_group_empty(void) { @@ -316,7 +318,6 @@ static int root_task_group_empty(void) } #endif -#ifdef CONFIG_FAIR_GROUP_SCHED #ifdef CONFIG_USER_SCHED # define INIT_TASK_GROUP_LOAD (2*NICE_0_LOAD) #else /* !CONFIG_USER_SCHED */ From eb647138acefc897c0eb6eddd5d3650966dfe627 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Sun, 8 Nov 2009 12:12:14 +0100 Subject: [PATCH 260/743] x86/PCI: Adjust GFP mask handling for coherent allocations Rather than forcing GFP flags and DMA mask to be inconsistent, GFP flags should be determined even for the fallback device through dma_alloc_coherent_mask()/dma_alloc_coherent_gfp_flags(). This restores 64-bit behavior as it was prior to commits 8965eb19386fdf5ccd0ef8b02593eb8560aa3416 and 4a367f3a9dbf2e7ffcee4702203479809236ee6e (not sure why there are two of them), where GFP_DMA was forced on for 32-bit, but not for 64-bit, with the slight adjustment that afaict even 32-bit doesn't need this without CONFIG_ISA. Signed-off-by: Jan Beulich Acked-by: Takashi Iwai LKML-Reference: <4AF18187020000780001D8AA@vpn.id2.novell.com> Signed-off-by: Ingo Molnar Signed-off-by: Jesse Barnes --- arch/x86/include/asm/dma-mapping.h | 10 +++++++--- arch/x86/kernel/pci-dma.c | 6 ++---- 2 files changed, 9 insertions(+), 7 deletions(-) diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h index 0ee770d23d0e..6a25d5d42836 100644 --- a/arch/x86/include/asm/dma-mapping.h +++ b/arch/x86/include/asm/dma-mapping.h @@ -14,6 +14,12 @@ #include #include +#ifdef CONFIG_ISA +# define ISA_DMA_BIT_MASK DMA_BIT_MASK(24) +#else +# define ISA_DMA_BIT_MASK DMA_BIT_MASK(32) +#endif + extern dma_addr_t bad_dma_address; extern int iommu_merge; extern struct device x86_dma_fallback_dev; @@ -124,10 +130,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, if (dma_alloc_from_coherent(dev, size, dma_handle, &memory)) return memory; - if (!dev) { + if (!dev) dev = &x86_dma_fallback_dev; - gfp |= GFP_DMA; - } if (!is_device_dma_capable(dev)) return NULL; diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index b2a71dca5642..a6e804d16c35 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -45,12 +45,10 @@ int iommu_pass_through __read_mostly; dma_addr_t bad_dma_address __read_mostly = 0; EXPORT_SYMBOL(bad_dma_address); -/* Dummy device used for NULL arguments (normally ISA). Better would - be probably a smaller DMA mask, but this is bug-to-bug compatible - to older i386. */ +/* Dummy device used for NULL arguments (normally ISA). */ struct device x86_dma_fallback_dev = { .init_name = "fallback device", - .coherent_dma_mask = DMA_BIT_MASK(32), + .coherent_dma_mask = ISA_DMA_BIT_MASK, .dma_mask = &x86_dma_fallback_dev.coherent_dma_mask, }; EXPORT_SYMBOL(x86_dma_fallback_dev); From c10edee2e1716f8cf217cf52ed01ae4742fcdf3c Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Sun, 8 Nov 2009 18:01:06 +0200 Subject: [PATCH 261/743] perf tools: Fix permission checks The perf_event_open() system call returns EACCES if the user is not root which results in a very confusing error message: $ perf record -A -a -f Error: perfcounter syscall returned with -1 (Permission denied) Fatal: No CONFIG_PERF_EVENTS=y kernel support configured? It turns out that's because perf tools are checking only for EPERM. Fix that up to get a much better error message: $ perf record -A -a -f Fatal: Permission error - are you root? Signed-off-by: Pekka Enberg Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Frederic Weisbecker LKML-Reference: <1257696066-4046-1-git-send-email-penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar --- tools/perf/builtin-record.c | 2 +- tools/perf/builtin-top.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 3eeef339c787..a4be453fc8a9 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -426,7 +426,7 @@ try_again: if (fd[nr_cpu][counter] < 0) { int err = errno; - if (err == EPERM) + if (err == EPERM || err == EACCES) die("Permission error - are you root?\n"); else if (err == ENODEV && profile_cpu != -1) die("No such device - did you specify an out-of-range profile CPU?\n"); diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index a1b1d10912dc..e23bc74e734f 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -1027,7 +1027,7 @@ try_again: if (fd[i][counter] < 0) { int err = errno; - if (err == EPERM) + if (err == EPERM || err == EACCES) die("No permission - are you root?\n"); /* * If it's cycles then fall back to hrtimer From bfd2e29f04e5f048ea62677811d1244badd6661e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 8 Nov 2009 20:05:28 +0000 Subject: [PATCH 262/743] [ARM] Fix test for unimplemented ARM syscalls The existing test always failed since 'no' was always greater than 0x7ff. Signed-off-by: Russell King --- arch/arm/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 95718a6b50a6..1bbda04a5380 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -573,7 +573,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) if not implemented, rather than raising SIGILL. This way the calling program can gracefully determine whether a feature is supported. */ - if (no <= 0x7ff) + if ((no & 0xffff) <= 0x7ff) return -ENOSYS; break; } From 1e424a348303694fabdf8b1efbfcb1a892dfa63a Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sun, 8 Nov 2009 15:45:44 -0500 Subject: [PATCH 263/743] ext4: partial revert to fix double brelse WARNING() This is a partial revert of commit 6487a9d (only the changes made to fs/ext4/namei.c), since it is causing the following brelse() double-free warning when running fsstress on a file system with 1k blocksize and we run into a block allocation failure while converting a single-block directory to a multi-block hash-tree indexed directory. WARNING: at fs/buffer.c:1197 __brelse+0x2e/0x33() Hardware name: VFS: brelse: Trying to free free buffer Modules linked in: Pid: 2226, comm: jbd2/sdd-8 Not tainted 2.6.32-rc6-00577-g0003f55 #101 Call Trace: [] warn_slowpath_common+0x65/0x95 [] warn_slowpath_fmt+0x29/0x2c [] __brelse+0x2e/0x33 [] jbd2_journal_refile_buffer+0x67/0x6c [] jbd2_journal_commit_transaction+0x319/0x14d8 [] ? try_to_del_timer_sync+0x58/0x60 [] ? sched_clock_cpu+0x12a/0x13e [] ? trace_hardirqs_off+0xb/0xd [] ? cpu_clock+0x3f/0x5b [] ? lock_release_holdtime+0x36/0x137 [] ? _spin_unlock_irqrestore+0x44/0x51 [] ? trace_hardirqs_on_caller+0x103/0x124 [] ? trace_hardirqs_on+0xb/0xd [] ? try_to_del_timer_sync+0x58/0x60 [] kjournald2+0x11a/0x310 [] ? autoremove_wake_function+0x0/0x38 [] ? kjournald2+0x0/0x310 [] kthread+0x66/0x6b [] ? kthread+0x0/0x6b [] kernel_thread_helper+0x7/0x10 ---[ end trace 5579351b86af61e3 ]--- Commit 6487a9d was an attempt some buffer head leaks in an ENOSPC error path, but in some cases it actually results in an excess ENOSPC, as shown above. Fixing this means cleaning up who is responsible for releasing the buffer heads from the callee to the caller of add_dirent_to_buf(). Since that's a relatively complex change, and we're late in the rcX development cycle, I'm reverting this now, and holding back a more complete fix until after 2.6.32 ships. We've lived with this buffer_head leak on ENOSPC in ext3 and ext4 for a very long time; a few more months won't kill us. Signed-off-by: "Theodore Ts'o" Cc: Curt Wohlgemuth --- fs/ext4/namei.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index 7c8fe80bacdd..6d2c1b897fc7 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -1518,12 +1518,8 @@ static int ext4_add_entry(handle_t *handle, struct dentry *dentry, return retval; if (blocks == 1 && !dx_fallback && - EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_DIR_INDEX)) { - retval = make_indexed_dir(handle, dentry, inode, bh); - if (retval == -ENOSPC) - brelse(bh); - return retval; - } + EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_DIR_INDEX)) + return make_indexed_dir(handle, dentry, inode, bh); brelse(bh); } bh = ext4_append(handle, dir, &block, &retval); @@ -1532,10 +1528,7 @@ static int ext4_add_entry(handle_t *handle, struct dentry *dentry, de = (struct ext4_dir_entry_2 *) bh->b_data; de->inode = 0; de->rec_len = ext4_rec_len_to_disk(blocksize, blocksize); - retval = add_dirent_to_buf(handle, dentry, inode, de, bh); - if (retval == -ENOSPC) - brelse(bh); - return retval; + return add_dirent_to_buf(handle, dentry, inode, de, bh); } /* @@ -1664,8 +1657,7 @@ static int ext4_dx_add_entry(handle_t *handle, struct dentry *dentry, if (!de) goto cleanup; err = add_dirent_to_buf(handle, dentry, inode, de, bh); - if (err != -ENOSPC) - bh = NULL; + bh = NULL; goto cleanup; journal_error: From a556bec9955c8e47b40a87dbfeef6f24d3b2228f Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Mon, 9 Nov 2009 08:51:35 +0900 Subject: [PATCH 264/743] m32r: fix arch/m32r/boot/compressed/Makefile - Fix a comment string - Fix a typo of $(suffix-y) Signed-off-by: Hirokazu Takata --- arch/m32r/boot/compressed/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile index 1003880d0dfd..177716b1d613 100644 --- a/arch/m32r/boot/compressed/Makefile +++ b/arch/m32r/boot/compressed/Makefile @@ -1,5 +1,5 @@ # -# linux/arch/sh/boot/compressed/Makefile +# linux/arch/m32r/boot/compressed/Makefile # # create a compressed vmlinux image from the original vmlinux # @@ -47,5 +47,5 @@ suffix_$(CONFIG_KERNEL_GZIP) = gz suffix_$(CONFIG_KERNEL_BZIP2) = bz2 suffix_$(CONFIG_KERNEL_LZMA) = lzma -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE $(call if_changed,ld) From 1c9d80ddc60f8ac26344ec3db9830e5f8016c16d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 8 Nov 2009 17:41:20 -0800 Subject: [PATCH 265/743] sparc: Move of_set_property_mutex acquisition outside of devtree_lock grab. Otherwise we try to sleep with preemption disabled, etc. Noticed by Thomas Gleixner. Signed-off-by: David S. Miller --- arch/sparc/kernel/prom_common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c index 138910c67206..d80a65d9e893 100644 --- a/arch/sparc/kernel/prom_common.c +++ b/arch/sparc/kernel/prom_common.c @@ -79,6 +79,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len err = -ENODEV; + mutex_lock(&of_set_property_mutex); write_lock(&devtree_lock); prevp = &dp->properties; while (*prevp) { @@ -88,9 +89,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len void *old_val = prop->value; int ret; - mutex_lock(&of_set_property_mutex); ret = prom_setprop(dp->node, name, val, len); - mutex_unlock(&of_set_property_mutex); err = -EINVAL; if (ret >= 0) { @@ -109,6 +108,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len prevp = &(*prevp)->next; } write_unlock(&devtree_lock); + mutex_unlock(&of_set_property_mutex); /* XXX Upate procfs if necessary... */ From a9d244a2ff163247b607c4bb64803230ca8f8acb Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Thu, 5 Nov 2009 23:14:39 +0000 Subject: [PATCH 266/743] sh: Account for cache aliases in flush_icache_range() The icache may also contain aliases so we must account for them just like we do when manipulating the dcache. We usually get away with aliases in the icache because the instructions that are read from memory are read-only, i.e. they never change. However, the place where this bites us is when the code has been modified. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt --- arch/sh/mm/cache-sh4.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 519e2d16cd06..b7f235c74d66 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -72,6 +72,7 @@ static void __uses_jump_to_uncached sh4_flush_icache_range(void *args) for (v = start; v < end; v += L1_CACHE_BYTES) { unsigned long icacheaddr; + int j, n; __ocbwb(v); @@ -79,8 +80,10 @@ static void __uses_jump_to_uncached sh4_flush_icache_range(void *args) cpu_data->icache.entry_mask); /* Clear i-cache line valid-bit */ + n = boot_cpu_data.icache.n_aliases; for (i = 0; i < cpu_data->icache.ways; i++) { - __raw_writel(0, icacheaddr); + for (j = 0; j < n; j++) + __raw_writel(0, icacheaddr + (j * PAGE_SIZE)); icacheaddr += cpu_data->icache.way_incr; } } From 969e46a8533a3e40ce2146f6764a963b1f5505da Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 6 Nov 2009 22:42:05 +0000 Subject: [PATCH 267/743] sh: Replace old style lock initializer SPIN_LOCK_UNLOCKED is deprecated. Use __SPIN_LOCK_UNLOCKED instead. Signed-off-by: Thomas Gleixner Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Mundt --- arch/sh/include/asm/rwsem.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h index 1987f3ea7f1b..06e2251a5e48 100644 --- a/arch/sh/include/asm/rwsem.h +++ b/arch/sh/include/asm/rwsem.h @@ -41,7 +41,7 @@ struct rw_semaphore { #endif #define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ + { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ LIST_HEAD_INIT((name).wait_list) \ __RWSEM_DEP_MAP_INIT(name) } From d178f27fc5150d680d9df865ea9dfe3269cf00a6 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 9 Nov 2009 15:58:23 +0000 Subject: [PATCH 268/743] ksm: cond_resched in unstable tree KSM needs a cond_resched() for CONFIG_PREEMPT_NONE, in its unbounded search of the unstable tree. The stable tree cases already have one, and originally there was one down inside get_user_pages(); but I missed it when I converted to follow_page() instead. Signed-off-by: Hugh Dickins Acked-by: Izik Eidus Signed-off-by: Linus Torvalds --- mm/ksm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/ksm.c b/mm/ksm.c index bef1af4f77e3..5575f8628fef 100644 --- a/mm/ksm.c +++ b/mm/ksm.c @@ -1012,6 +1012,7 @@ static struct rmap_item *unstable_tree_search_insert(struct page *page, struct rmap_item *tree_rmap_item; int ret; + cond_resched(); tree_rmap_item = rb_entry(*new, struct rmap_item, node); page2[0] = get_mergeable_page(tree_rmap_item); if (!page2[0]) From 95491d902b4ed1bfd8f602aada793d74cc85428b Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Sun, 8 Nov 2009 19:03:55 -0500 Subject: [PATCH 269/743] ALSA: hda: Use model=auto quirk for Sony VAIO VGN-FW170J using ALC262 BugLink: https://bugs.launchpad.net/bugs/478309 The internal microphone on this VAIO model does not work unless the "auto" quirk is used. Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ff20048504b6..9bb4f75ca436 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -11460,6 +11460,7 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = { SND_PCI_QUIRK(0x104d, 0x820f, "Sony ASSAMD", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x104d, 0x9016, "Sony VAIO", ALC262_AUTO), /* dig-only */ SND_PCI_QUIRK(0x104d, 0x9025, "Sony VAIO Z21MN", ALC262_TOSHIBA_S06), + SND_PCI_QUIRK(0x104d, 0x9035, "Sony VAIO VGN-FW170J", ALC262_AUTO), SND_PCI_QUIRK_MASK(0x104d, 0xff00, 0x9000, "Sony VAIO", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1", From 86cf898e1d0fca245173980e3897580db38569a8 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 9 Nov 2009 22:15:15 +0000 Subject: [PATCH 270/743] intel-iommu: Check for 'DMAR at zero' BIOS error earlier. Chris Wright has some patches which let us fall back to swiotlb nicely if IOMMU initialisation fails. But those are a bit much for 2.6.32. Instead, let's shift the check for the biggest problem, the HP and Acer BIOS bug which reports a DMAR at physical address zero. That one can actually be checked much earlier -- before we even admit to having detected an IOMMU in the first place. So the swiotlb init goes ahead as we want. Signed-off-by: David Woodhouse --- drivers/pci/dmar.c | 49 ++++++++++++++++++++++++++++++++++++---------- 1 file changed, 39 insertions(+), 10 deletions(-) diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index 22b02c6df854..e5f8fc164fd3 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -175,15 +175,6 @@ dmar_parse_one_drhd(struct acpi_dmar_header *header) int ret = 0; drhd = (struct acpi_dmar_hardware_unit *)header; - if (!drhd->address) { - /* Promote an attitude of violence to a BIOS engineer today */ - WARN(1, "Your BIOS is broken; DMAR reported at address zero!\n" - "BIOS vendor: %s; Ver: %s; Product Version: %s\n", - dmi_get_system_info(DMI_BIOS_VENDOR), - dmi_get_system_info(DMI_BIOS_VERSION), - dmi_get_system_info(DMI_PRODUCT_VERSION)); - return -ENODEV; - } dmaru = kzalloc(sizeof(*dmaru), GFP_KERNEL); if (!dmaru) return -ENOMEM; @@ -591,12 +582,50 @@ int __init dmar_table_init(void) return 0; } +int __init check_zero_address(void) +{ + struct acpi_table_dmar *dmar; + struct acpi_dmar_header *entry_header; + struct acpi_dmar_hardware_unit *drhd; + + dmar = (struct acpi_table_dmar *)dmar_tbl; + entry_header = (struct acpi_dmar_header *)(dmar + 1); + + while (((unsigned long)entry_header) < + (((unsigned long)dmar) + dmar_tbl->length)) { + /* Avoid looping forever on bad ACPI tables */ + if (entry_header->length == 0) { + printk(KERN_WARNING PREFIX + "Invalid 0-length structure\n"); + return 0; + } + + if (entry_header->type == ACPI_DMAR_TYPE_HARDWARE_UNIT) { + drhd = (void *)entry_header; + if (!drhd->address) { + /* Promote an attitude of violence to a BIOS engineer today */ + WARN(1, "Your BIOS is broken; DMAR reported at address zero!\n" + "BIOS vendor: %s; Ver: %s; Product Version: %s\n", + dmi_get_system_info(DMI_BIOS_VENDOR), + dmi_get_system_info(DMI_BIOS_VERSION), + dmi_get_system_info(DMI_PRODUCT_VERSION)); + return 0; + } + break; + } + + entry_header = ((void *)entry_header + entry_header->length); + } + return 1; +} + void __init detect_intel_iommu(void) { int ret; ret = dmar_table_detect(); - + if (ret) + ret = check_zero_address(); { #ifdef CONFIG_INTR_REMAP struct acpi_table_dmar *dmar; From 52cb0148ef2401dbffa4daf60588cad27e4f329d Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 9 Nov 2009 23:21:19 +0000 Subject: [PATCH 271/743] mtd/maps: Fix accidental removal in Makefile The commit d79c326 ("gpio-addr-flash: new driver for GPIO assisted flash addressing") removed two lines from the Makefile by accident. Though I'm not sure how this accident happened, this patch reverts the removal. Signed-off-by: Atsushi Nemoto Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- drivers/mtd/maps/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 1d5cf8636723..ae2f6dbe43c3 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -58,4 +58,6 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o +obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o +obj-$(CONFIG_MTD_VMU) += vmu-flash.o obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o From a3323b72b964471650a6128de4e10f8e88d47ae1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 3 Nov 2009 14:42:04 +0000 Subject: [PATCH 272/743] ARM: SMDK6410: Configure GPIO pull up for WM835x IRQ line When used with the WM1190-EV1 board we can use the internal pull up resistor of the CPU to provide the required pull for the IRQ line. Without this interrupts from the WM835x don't work in the default WM1190-EV1 hardwaer configuration. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/mach-smdk6410.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index ea51dbe76e3e..9f1a21462620 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -320,6 +320,9 @@ static int __init smdk6410_wm8350_init(struct wm8350 *wm8350) { int i; + /* Configure the IRQ line */ + s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP); + /* Instantiate the regulators */ for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++) wm8350_register_regulator(wm8350, From c7a19787195fcc90aabc3a71f29647ba9a443efe Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 3 Nov 2009 14:42:10 +0000 Subject: [PATCH 273/743] ARM: SMDK6410: Allocate more GPIO space for WM1190-EV1 The WM835x has some GPIOs on it, allocate some space so we can use them with gpiolib. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig index 53fc3ff657f7..72d4b11b2077 100644 --- a/arch/arm/mach-s3c6410/Kconfig +++ b/arch/arm/mach-s3c6410/Kconfig @@ -77,6 +77,7 @@ config SMDK6410_WM1190_EV1 depends on MACH_SMDK6410 select REGULATOR select REGULATOR_WM8350 + select S3C24XX_GPIO_EXTRA64 select MFD_WM8350_I2C select MFD_WM8350_CONFIG_MODE_0 select MFD_WM8350_CONFIG_MODE_3 From 54489cd46a3a268ed981c681726c6d690883f076 Mon Sep 17 00:00:00 2001 From: Maurus Cuelenaere Date: Wed, 4 Nov 2009 13:13:29 +0100 Subject: [PATCH 274/743] ARM: S3C64XX: Remove duplicate s3c_dma_has_circular() definition for S3C64xx. This patch removes the duplicated s3c_dma_has_circular() definition and so fixes compilation for S3C64xx. Signed-off-by: Maurus Cuelenaere Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6400/include/mach/dma.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h index 004edab23954..1067619f0ba0 100644 --- a/arch/arm/mach-s3c6400/include/mach/dma.h +++ b/arch/arm/mach-s3c6400/include/mach/dma.h @@ -68,11 +68,6 @@ static __inline__ int s3c_dma_has_circular(void) #define S3C2410_DMAF_CIRCULAR (1 << 0) -static inline bool s3c_dma_has_circular(void) -{ - return false; -} - #include #endif /* __ASM_ARCH_IRQ_H */ From b3c5496fbfc2e5f64bb85b142615717850fee980 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 9 Nov 2009 23:45:47 +0000 Subject: [PATCH 275/743] ARM: S3C64XX: Tidy definition and comments in s3c_dma_has_circular() The recent changes to arch/arm/mach-s3c6400/include/mach/dma.h have left an out of date comment in there as well as accidentally changing the type of the function. Fix the commit 54489cd46a3a268ed981c681726c6d690883f076 Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6400/include/mach/dma.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h index 1067619f0ba0..6723860748be 100644 --- a/arch/arm/mach-s3c6400/include/mach/dma.h +++ b/arch/arm/mach-s3c6400/include/mach/dma.h @@ -58,12 +58,9 @@ enum dma_ch { DMACH_MAX /* the end */ }; -static __inline__ int s3c_dma_has_circular(void) +static __inline__ bool s3c_dma_has_circular(void) { - /* we will be supporting ciruclar buffers as soon as we have DMA - * engine support. - */ - return 1; + return true; } #define S3C2410_DMAF_CIRCULAR (1 << 0) From 210012a6cd8770a73d1aa74b742667b462d04511 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 5 Nov 2009 13:44:20 +0900 Subject: [PATCH 276/743] ARM: S3C64XX: DMA: Protect buffer pointers while manipulation Ensure the DMA buffer points are not updated from another source during the process of enquing a buffer. Signed-off-by: Jassi Brar [ben-linux@fluff.org: Updated patch comment] Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/dma.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index 266a10745a85..6fa706f0f42a 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c @@ -339,6 +339,7 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, struct s3c64xx_dma_buff *next; struct s3c64xx_dma_buff *buff; struct pl080s_lli *lli; + unsigned long flags; int ret; WARN_ON(!chan); @@ -366,6 +367,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, s3c64xx_dma_fill_lli(chan, lli, data, size); + local_irq_save(flags); + if ((next = chan->next) != NULL) { struct s3c64xx_dma_buff *end = chan->end; struct pl080s_lli *endlli = end->lli; @@ -397,6 +400,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, s3c64xx_lli_to_regs(chan, lli); } + local_irq_restore(flags); + show_lli(lli); dbg_showchan(chan); From 6d0b8627d545aed7d4bcaad2156b6cb95e105715 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 5 Nov 2009 13:44:26 +0900 Subject: [PATCH 277/743] ARM: S3C64XX: DMA: Unify callback functions for success/failure Replace s3c64xx_dma_tcirq and s3c64xx_dma_errirq with the common s3c64xx_dma_buffdone. Signed-off-by: Jassi Brar Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/dma.c | 34 +++++++++++++--------------------- 1 file changed, 13 insertions(+), 21 deletions(-) diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index 6fa706f0f42a..5a08a86419dd 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c @@ -565,26 +565,11 @@ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) EXPORT_SYMBOL(s3c2410_dma_free); - -static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs) -{ - struct s3c2410_dma_chan *chan = dmac->channels + offs; - - /* note, we currently do not bother to work out which buffer - * or buffers have been completed since the last tc-irq. */ - - if (chan->callback_fn) - (chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK); -} - -static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs) -{ - printk(KERN_DEBUG "%s: offs %d\n", __func__, offs); -} - static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) { struct s3c64xx_dmac *dmac = pw; + struct s3c2410_dma_chan *chan; + enum s3c2410_dma_buffresult res; u32 tcstat, errstat; u32 bit; int offs; @@ -593,15 +578,22 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) errstat = readl(dmac->regs + PL080_ERR_STATUS); for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) { + + if (!(errstat & bit) && !(tcstat & bit)) + continue; + + chan = dmac->channels + offs; + res = S3C2410_RES_ERR; + if (tcstat & bit) { writel(bit, dmac->regs + PL080_TC_CLEAR); - s3c64xx_dma_tcirq(dmac, offs); + res = S3C2410_RES_OK; } - if (errstat & bit) { - s3c64xx_dma_errirq(dmac, offs); + if (errstat & bit) writel(bit, dmac->regs + PL080_ERR_CLEAR); - } + + s3c64xx_dma_bufffdone(chan, chan->curr, res); } return IRQ_HANDLED; From 7507f39c57d4a285aea11c379fbc65c2b3f375ef Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 5 Nov 2009 13:44:45 +0900 Subject: [PATCH 278/743] ARM: S3C64XX: DMA: Make src and dst transfer size same Some devices don't seem to work if the source and desitnation transfer widths are not same. For example, SPI dma xfers, with 8bits/word, don't work without this patch. Signed-off-by: Jassi Brar Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/dma.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index 5a08a86419dd..a94281bb84d6 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c @@ -151,8 +151,6 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, src = chan->dev_addr; dst = data; control0 = PL080_CONTROL_SRC_AHB2; - control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT; - control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT; control0 |= PL080_CONTROL_DST_INCR; break; @@ -160,8 +158,6 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, src = data; dst = chan->dev_addr; control0 = PL080_CONTROL_DST_AHB2; - control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT; - control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT; control0 |= PL080_CONTROL_SRC_INCR; break; default: @@ -173,6 +169,8 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, control1 = size >> chan->hw_width; /* size in no of xfers */ control0 |= PL080_CONTROL_PROT_SYS; /* always in priv. mode */ control0 |= PL080_CONTROL_TC_IRQ_EN; /* always fire IRQ */ + control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT; + control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT; lli->src_addr = src; lli->dst_addr = dst; From 9b08284bf22f438baa2d6b68015ff17ddb431a61 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 5 Nov 2009 13:44:33 +0900 Subject: [PATCH 279/743] ARM: S3C64XX: DMA: Callback with correct buffer pointer buffdone callback should be called per buffer request with pointer to the latest serviced request. 'next' should point to the one next to currently active. Signed-off-by: Jassi Brar Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/dma.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index a94281bb84d6..7d12eb8fa58d 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c @@ -576,6 +576,7 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) errstat = readl(dmac->regs + PL080_ERR_STATUS); for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) { + struct s3c64xx_dma_buff *buff; if (!(errstat & bit) && !(tcstat & bit)) continue; @@ -591,7 +592,33 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) if (errstat & bit) writel(bit, dmac->regs + PL080_ERR_CLEAR); - s3c64xx_dma_bufffdone(chan, chan->curr, res); + /* 'next' points to the buffer that is next to the + * currently active buffer. + * For CIRCULAR queues, 'next' will be same as 'curr' + * when 'end' is the active buffer. + */ + buff = chan->curr; + while (buff && buff != chan->next + && buff->next != chan->next) + buff = buff->next; + + if (!buff) + BUG(); + + if (buff == chan->next) + buff = chan->end; + + s3c64xx_dma_bufffdone(chan, buff, res); + + /* Update 'next' */ + buff = chan->next; + if (chan->next == chan->end) { + chan->next = chan->curr; + if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) + chan->end = NULL; + } else { + chan->next = buff->next; + } } return IRQ_HANDLED; From 336b1a3181d81db85c0af3d0c18fe0a04b4d5126 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 5 Nov 2009 13:44:39 +0900 Subject: [PATCH 280/743] ARM: S3C64XX: DMA: Free node for non-circular queues We need to free the buff and lli nodes if the buffer queue is not CIRCULAR. Signed-off-by: Jassi Brar Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/dma.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index 7d12eb8fa58d..d554b936fcfb 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c @@ -610,6 +610,12 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) s3c64xx_dma_bufffdone(chan, buff, res); + /* Free the node and update curr, if non-circular queue */ + if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) { + chan->curr = buff->next; + s3c64xx_dma_freebuff(buff); + } + /* Update 'next' */ buff = chan->next; if (chan->next == chan->end) { From 5ebd4c22897dce65845807a9bd3a31cc4e142b53 Mon Sep 17 00:00:00 2001 From: Soeren Sandmann Date: Wed, 28 Oct 2009 18:55:36 +0100 Subject: [PATCH 281/743] highmem: Fix race in debug_kmap_atomic() which could cause warn_count to underflow debug_kmap_atomic() tries to prevent ever printing more than 10 warnings, but it does so by testing whether an unsigned integer is equal to 0. However, if the warning is caused by a nested IRQ, then this counter may underflow and the stream of warnings will never end. Fix that by using a signed integer instead. Signed-off-by: Soeren Sandmann Pedersen Cc: Linus Torvalds Cc: a.p.zijlstra@chello.nl Cc: # .31.x LKML-Reference: Signed-off-by: Ingo Molnar --- mm/highmem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/highmem.c b/mm/highmem.c index 25878cc49daa..33587de6b871 100644 --- a/mm/highmem.c +++ b/mm/highmem.c @@ -426,9 +426,9 @@ void __init page_address_init(void) void debug_kmap_atomic(enum km_type type) { - static unsigned warn_count = 10; + static int warn_count = 10; - if (unlikely(warn_count == 0)) + if (unlikely(warn_count < 0)) return; if (unlikely(in_interrupt())) { From d4515646699b6ad7b1a98ceb871296b957f3ef47 Mon Sep 17 00:00:00 2001 From: Soeren Sandmann Date: Wed, 28 Oct 2009 18:56:35 +0100 Subject: [PATCH 282/743] highmem: Fix debug_kmap_atomic() to also handle KM_IRQ_PTE, KM_NMI, and KM_NMI_PTE Previously calling debug_kmap_atomic() with these types would cause spurious warnings. (triggered by SysProf using perf events) Signed-off-by: Soeren Sandmann Pedersen Cc: Linus Torvalds Cc: a.p.zijlstra@chello.nl Cc: # .31.x LKML-Reference: Signed-off-by: Ingo Molnar --- mm/highmem.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/mm/highmem.c b/mm/highmem.c index 33587de6b871..9c1e627f282e 100644 --- a/mm/highmem.c +++ b/mm/highmem.c @@ -432,10 +432,15 @@ void debug_kmap_atomic(enum km_type type) return; if (unlikely(in_interrupt())) { - if (in_irq()) { + if (in_nmi()) { + if (type != KM_NMI && type != KM_NMI_PTE) { + WARN_ON(1); + warn_count--; + } + } else if (in_irq()) { if (type != KM_IRQ0 && type != KM_IRQ1 && type != KM_BIO_SRC_IRQ && type != KM_BIO_DST_IRQ && - type != KM_BOUNCE_READ) { + type != KM_BOUNCE_READ && type != KM_IRQ_PTE) { WARN_ON(1); warn_count--; } @@ -452,7 +457,9 @@ void debug_kmap_atomic(enum km_type type) } if (type == KM_IRQ0 || type == KM_IRQ1 || type == KM_BOUNCE_READ || - type == KM_BIO_SRC_IRQ || type == KM_BIO_DST_IRQ) { + type == KM_BIO_SRC_IRQ || type == KM_BIO_DST_IRQ || + type == KM_IRQ_PTE || type == KM_NMI || + type == KM_NMI_PTE ) { if (!irqs_disabled()) { WARN_ON(1); warn_count--; From a39533b4ddad388b64a20bcabd17ac125fd4ba65 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 9 Nov 2009 16:41:21 -0500 Subject: [PATCH 283/743] drm/radeon/r600: CS parser updates Add some additional regs that require relocs. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_cs.c | 18 ++++++++++++++++++ drivers/gpu/drm/radeon/r600d.h | 10 ++++++++++ 2 files changed, 28 insertions(+) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 17e42195c632..0d820764f340 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -466,6 +466,23 @@ static int r600_packet3_check(struct radeon_cs_parser *p, for (i = 0; i < pkt->count; i++) { reg = start_reg + (4 * i); switch (reg) { + case SQ_ESGS_RING_BASE: + case SQ_GSVS_RING_BASE: + case SQ_ESTMP_RING_BASE: + case SQ_GSTMP_RING_BASE: + case SQ_VSTMP_RING_BASE: + case SQ_PSTMP_RING_BASE: + case SQ_FBUF_RING_BASE: + case SQ_REDUC_RING_BASE: + case SX_MEMORY_EXPORT_BASE: + r = r600_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("bad SET_CONFIG_REG " + "0x%04X\n", reg); + return -EINVAL; + } + ib[idx+1+i] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); + break; case CP_COHER_BASE: /* use PACKET3_SURFACE_SYNC */ return -EINVAL; @@ -487,6 +504,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p, reg = start_reg + (4 * i); switch (reg) { case DB_DEPTH_BASE: + case DB_HTILE_DATA_BASE: case CB_COLOR0_BASE: case CB_COLOR1_BASE: case CB_COLOR2_BASE: diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index cf238bf5700f..b99f45d85d88 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -118,6 +118,7 @@ #define DB_DEBUG 0x9830 #define PREZ_MUST_WAIT_FOR_POSTZ_DONE (1 << 31) #define DB_DEPTH_BASE 0x2800C +#define DB_HTILE_DATA_BASE 0x28014 #define DB_WATERMARKS 0x9838 #define DEPTH_FREE(x) ((x) << 0) #define DEPTH_FLUSH(x) ((x) << 5) @@ -170,6 +171,14 @@ #define SQ_STACK_RESOURCE_MGMT_2 0x8c14 # define NUM_GS_STACK_ENTRIES(x) ((x) << 0) # define NUM_ES_STACK_ENTRIES(x) ((x) << 16) +#define SQ_ESGS_RING_BASE 0x8c40 +#define SQ_GSVS_RING_BASE 0x8c48 +#define SQ_ESTMP_RING_BASE 0x8c50 +#define SQ_GSTMP_RING_BASE 0x8c58 +#define SQ_VSTMP_RING_BASE 0x8c60 +#define SQ_PSTMP_RING_BASE 0x8c68 +#define SQ_FBUF_RING_BASE 0x8c70 +#define SQ_REDUC_RING_BASE 0x8c78 #define GRBM_CNTL 0x8000 # define GRBM_READ_TIMEOUT(x) ((x) << 0) @@ -355,6 +364,7 @@ #define SX_MISC 0x28350 +#define SX_MEMORY_EXPORT_BASE 0x9010 #define SX_DEBUG_1 0x9054 #define SMX_EVENT_RELEASE (1 << 0) #define ENABLE_NEW_SMX_ADDRESS (1 << 16) From eeba57518c01cf462d87bbfc59049139da47adcb Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Sat, 7 Nov 2009 16:27:32 +0100 Subject: [PATCH 284/743] drm/kms: Init the CRTC info fields for modes forced from the command line. Fixes fdo bug 24710. Signed-off-by: Francisco Jerez Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 1fe4e1d344fd..bbfd110a7168 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -331,6 +331,7 @@ create_mode: cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60, cmdline_mode->rb, cmdline_mode->interlace, cmdline_mode->margins); + drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); list_add(&mode->head, &connector->modes); return mode; } From 506f90eeae682dc96c11c7aefac0262b3a560b49 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 29 Oct 2009 14:45:52 +0100 Subject: [PATCH 285/743] x86, amd-ucode: Check UCODE_MAGIC before loading the container file Signed-off-by: Borislav Petkov Signed-off-by: Andreas Herrmann LKML-Reference: <20091029134552.GC30802@alberich.amd.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/microcode_amd.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 366baa179913..f4c538b681ca 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -317,6 +317,12 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device) return UCODE_NFOUND; } + if (*(u32 *)firmware->data != UCODE_MAGIC) { + printk(KERN_ERR "microcode: invalid UCODE_MAGIC (0x%08x)\n", + *(u32 *)firmware->data); + return UCODE_ERROR; + } + ret = generic_load_microcode(cpu, firmware->data, firmware->size); release_firmware(firmware); From dbaccc0cca830efe9bb3c9e4a1cfcd6503790079 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Mon, 9 Nov 2009 15:17:24 +0000 Subject: [PATCH 286/743] ALSA: hda - Tweak OLPC XO-1.5 microphone bias Our contacts at Conexant suggested that we reduce the external microphone bias to 50% in order to center the input signal with the DC input range of the codec. This is because the microphone port is DC coupled for potential use with sensors. Signed-off-by: Daniel Drake Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 6479e65858d3..905859d4f4df 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -110,6 +110,7 @@ struct conexant_spec { unsigned int dell_automute; unsigned int port_d_mode; + unsigned char ext_mic_bias; }; static int conexant_playback_pcm_open(struct hda_pcm_stream *hinfo, @@ -1927,6 +1928,11 @@ static hda_nid_t cxt5066_adc_nids[3] = { 0x14, 0x15, 0x16 }; static hda_nid_t cxt5066_capsrc_nids[1] = { 0x17 }; #define CXT5066_SPDIF_OUT 0x21 +/* OLPC's microphone port is DC coupled for use with external sensors, + * therefore we use a 50% mic bias in order to center the input signal with + * the DC input range of the codec. */ +#define CXT5066_OLPC_EXT_MIC_BIAS PIN_VREF50 + static struct hda_channel_mode cxt5066_modes[1] = { { 2, NULL }, }; @@ -1980,9 +1986,10 @@ static int cxt5066_hp_master_sw_put(struct snd_kcontrol *kcontrol, /* toggle input of built-in and mic jack appropriately */ static void cxt5066_automic(struct hda_codec *codec) { - static struct hda_verb ext_mic_present[] = { + struct conexant_spec *spec = codec->spec; + struct hda_verb ext_mic_present[] = { /* enable external mic, port B */ - {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, spec->ext_mic_bias}, /* switch to external mic input */ {0x17, AC_VERB_SET_CONNECT_SEL, 0}, @@ -2235,7 +2242,7 @@ static struct hda_verb cxt5066_init_verbs_olpc[] = { {0x19, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */ /* Port B: external microphone */ - {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, CXT5066_OLPC_EXT_MIC_BIAS}, /* Port C: internal microphone */ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, @@ -2353,6 +2360,7 @@ static int patch_cxt5066(struct hda_codec *codec) spec->input_mux = &cxt5066_capture_source; spec->port_d_mode = PIN_HP; + spec->ext_mic_bias = PIN_VREF80; spec->num_init_verbs = 1; spec->init_verbs[0] = cxt5066_init_verbs; @@ -2384,6 +2392,7 @@ static int patch_cxt5066(struct hda_codec *codec) spec->mixers[spec->num_mixers++] = cxt5066_mixer_master_olpc; spec->mixers[spec->num_mixers++] = cxt5066_mixers; spec->port_d_mode = 0; + spec->ext_mic_bias = CXT5066_OLPC_EXT_MIC_BIAS; /* no S/PDIF out */ spec->multiout.dig_out_nid = 0; From cc20d42986d5807cbe4f5c7c8e3dab2e59ea0db3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 9 Nov 2009 23:53:29 +0000 Subject: [PATCH 287/743] ARM: Use a definition for the userspace cmpxchg emulation syscall Use a definition for the cmpxchg SWI instead of hard-coding the number. Signed-off-by: Russell King Acked-by: Nicolas Pitre --- arch/arm/include/asm/unistd.h | 9 +++++++++ arch/arm/kernel/entry-armv.S | 7 ++++--- arch/arm/kernel/traps.c | 2 +- 3 files changed, 14 insertions(+), 4 deletions(-) diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 7020217fc49f..4e506d09e5f9 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -402,6 +402,15 @@ #define __ARM_NR_usr32 (__ARM_NR_BASE+4) #define __ARM_NR_set_tls (__ARM_NR_BASE+5) +/* + * *NOTE*: This is a ghost syscall private to the kernel. Only the + * __kuser_cmpxchg code in entry-armv.S should be aware of its + * existence. Don't ever use this from user code. + */ +#ifdef __KERNEL__ +#define __ARM_NR_cmpxchg (__ARM_NR_BASE+0x00fff0) +#endif + /* * The following syscalls are obsolete and no longer available for EABI. */ diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 0022b4d57f8b..d2903e3bc861 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -21,6 +21,7 @@ #include #include #include +#include #include "entry-header.S" @@ -908,10 +909,10 @@ __kuser_cmpxchg: @ 0xffff0fc0 * A special ghost syscall is used for that (see traps.c). */ stmfd sp!, {r7, lr} - mov r7, #0xff00 @ 0xfff0 into r7 for EABI - orr r7, r7, #0xf0 - swi #0x9ffff0 + ldr r7, =1f @ it's 20 bits + swi __ARM_NR_cmpxchg ldmfd sp!, {r7, pc} +1: .word __ARM_NR_cmpxchg #elif __LINUX_ARM_ARCH__ < 6 diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 1bbda04a5380..3f361a783f43 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -528,7 +528,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) * __kuser_cmpxchg code in entry-armv.S should be aware of its * existence. Don't ever use this from user code. */ - case 0xfff0: + case NR(cmpxchg): for (;;) { extern void do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs); From 1efd374d78834a793663414402911765bcdda6eb Mon Sep 17 00:00:00 2001 From: Denis Turischev Date: Thu, 5 Nov 2009 13:32:40 +0200 Subject: [PATCH 288/743] [WATCHDOG] SBC-FITPC2 watchdog driver registration fix This patch fixes device registration process. Signed-off-by: Denis Turischev Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sbc_fitpc2_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c index 852ca1977917..91430a89107c 100644 --- a/drivers/watchdog/sbc_fitpc2_wdt.c +++ b/drivers/watchdog/sbc_fitpc2_wdt.c @@ -227,7 +227,7 @@ static int __init fitpc2_wdt_init(void) } err = misc_register(&fitpc2_wdt_miscdev); - if (!err) { + if (err) { pr_err("cannot register miscdev on minor=%d (err=%d)\n", WATCHDOG_MINOR, err); goto err_margin; From 4ac55982907e1d48e64feaa56be91b9b52d3714d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 10 Nov 2009 16:08:45 +0100 Subject: [PATCH 289/743] ALSA: hda - Avoid quirk for HP dc5750 The present quirk for HP dc5750 seems broken and maps the pins wrongly. Since the auto-parser works well for this device, set the default entry to use model=auto. Reference: Novell bnc#552154 https://bugzilla.novell.com/show_bug.cgi?id=552154 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 9bb4f75ca436..d1ccb6eaf9fc 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6249,7 +6249,7 @@ static struct snd_pci_quirk alc260_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER), SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100), SND_PCI_QUIRK(0x103c, 0x2808, "HP d5700", ALC260_HP_3013), - SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_HP_3013), + SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_AUTO), /* no quirk */ SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x3011, "HP", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x3012, "HP", ALC260_HP_DC7600), From 8579d2d7779d7ff41ea2a0183015e0e5038f1043 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 21 Oct 2009 09:09:38 +0200 Subject: [PATCH 290/743] sound: rawmidi: fix double init when opening MIDI device with O_APPEND Commit 9a1b64caac82aa02cb74587ffc798e6f42c6170a in 2.6.30 moved the substream initialization code to where it would be executed every time the substream is opened. This had the consequence that any further opening would drop and leak the data in the existing buffer, and that the device driver's open callback would be called multiple times, unexpectedly. Signed-off-by: Clemens Ladisch Cc: Signed-off-by: Takashi Iwai --- sound/core/rawmidi.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index c0adc14c91f0..3071e6f5801e 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -266,17 +266,19 @@ static int open_substream(struct snd_rawmidi *rmidi, { int err; - err = snd_rawmidi_runtime_create(substream); - if (err < 0) - return err; - err = substream->ops->open(substream); - if (err < 0) - return err; - substream->opened = 1; - if (substream->use_count++ == 0) + if (substream->use_count == 0) { + err = snd_rawmidi_runtime_create(substream); + if (err < 0) + return err; + err = substream->ops->open(substream); + if (err < 0) + return err; + substream->opened = 1; substream->active_sensing = 0; - if (mode & SNDRV_RAWMIDI_LFLG_APPEND) - substream->append = 1; + if (mode & SNDRV_RAWMIDI_LFLG_APPEND) + substream->append = 1; + } + substream->use_count++; rmidi->streams[substream->stream].substream_opened++; return 0; } From 16fb109644b5644e42ececeff644514de6f4bd03 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 21 Oct 2009 09:10:16 +0200 Subject: [PATCH 291/743] sound: rawmidi: fix checking of O_APPEND when opening MIDI device Commit 9a1b64caac82aa02cb74587ffc798e6f42c6170a in 2.6.30 dropped the check that a substream must already have been opened with O_APPEND to be able to open it a second time. This would make it possible for a substream to be switched to append mode, which would mean that non-atomic writes would fail unexpectedly. Signed-off-by: Clemens Ladisch Cc: Signed-off-by: Takashi Iwai --- sound/core/rawmidi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index 3071e6f5801e..091405385e15 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -248,7 +248,8 @@ static int assign_substream(struct snd_rawmidi *rmidi, int subdevice, list_for_each_entry(substream, &s->substreams, list) { if (substream->opened) { if (stream == SNDRV_RAWMIDI_STREAM_INPUT || - !(mode & SNDRV_RAWMIDI_LFLG_APPEND)) + !(mode & SNDRV_RAWMIDI_LFLG_APPEND) || + !substream->append) continue; } if (subdevice < 0 || subdevice == substream->number) { From b7fe750fcceda4fa6bef399b0e2812562728ea82 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 21 Oct 2009 09:11:43 +0200 Subject: [PATCH 292/743] sound: rawmidi: fix MIDI device O_APPEND error handling Commit 9a1b64caac82aa02cb74587ffc798e6f42c6170a in 2.6.30 broke the error handling code in rawmidi_open_priv(). If only the output substream of a RawMIDI device has been opened and if this device is then opened with O_RDWR | O_APPEND and if the initialization of the input substream fails (either because of low memory or because the device driver's open callback fails), then the runtime structure of the already open output substream will be freed and all following writes through the first handle will cause snd_rawmidi_write() to use the NULL runtime pointer. Signed-off-by: Clemens Ladisch Cc: Signed-off-by: Takashi Iwai --- sound/core/rawmidi.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index 091405385e15..70d6f25ba526 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -272,8 +272,10 @@ static int open_substream(struct snd_rawmidi *rmidi, if (err < 0) return err; err = substream->ops->open(substream); - if (err < 0) + if (err < 0) { + snd_rawmidi_runtime_free(substream); return err; + } substream->opened = 1; substream->active_sensing = 0; if (mode & SNDRV_RAWMIDI_LFLG_APPEND) @@ -300,27 +302,27 @@ static int rawmidi_open_priv(struct snd_rawmidi *rmidi, int subdevice, int mode, SNDRV_RAWMIDI_STREAM_INPUT, mode, &sinput); if (err < 0) - goto __error; + return err; } if (mode & SNDRV_RAWMIDI_LFLG_OUTPUT) { err = assign_substream(rmidi, subdevice, SNDRV_RAWMIDI_STREAM_OUTPUT, mode, &soutput); if (err < 0) - goto __error; + return err; } if (sinput) { err = open_substream(rmidi, sinput, mode); if (err < 0) - goto __error; + return err; } if (soutput) { err = open_substream(rmidi, soutput, mode); if (err < 0) { if (sinput) close_substream(rmidi, sinput, 0); - goto __error; + return err; } } @@ -328,13 +330,6 @@ static int rawmidi_open_priv(struct snd_rawmidi *rmidi, int subdevice, int mode, rfile->input = sinput; rfile->output = soutput; return 0; - - __error: - if (sinput && sinput->runtime) - snd_rawmidi_runtime_free(sinput); - if (soutput && soutput->runtime) - snd_rawmidi_runtime_free(soutput); - return err; } /* called from sound/core/seq/seq_midi.c */ From d8e235227899474976302cf272e5c2b756eb32de Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Fri, 6 Nov 2009 21:21:27 +0100 Subject: [PATCH 293/743] ssb-pcmcia: Fix 32bit register access in early bus scanning The scan function was using 32 bit access which does not work on 16bit CF cards. This patch corrects this by doing two 16 bit reads like ssb_pcmcia_read32 already does. mb -- Removed locking. That early in init there's no need for locking. Signed-off-by: Martin Fuzzey Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/ssb/scan.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c index b74212d698c7..e8b89e8ac9bd 100644 --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c @@ -162,6 +162,8 @@ static u8 chipid_to_nrcores(u16 chipid) static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx, u16 offset) { + u32 lo, hi; + switch (bus->bustype) { case SSB_BUSTYPE_SSB: offset += current_coreidx * SSB_CORE_SIZE; @@ -174,7 +176,9 @@ static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx, offset -= 0x800; } else ssb_pcmcia_switch_segment(bus, 0); - break; + lo = readw(bus->mmio + offset); + hi = readw(bus->mmio + offset + 2); + return lo | (hi << 16); case SSB_BUSTYPE_SDIO: offset += current_coreidx * SSB_CORE_SIZE; return ssb_sdio_scan_read32(bus, offset); From 8f611288c8db0c89447856c4c8970bb7ee535448 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 7 Nov 2009 18:37:37 +0100 Subject: [PATCH 294/743] b43: work around a locking issue in ->set_tim() ops->set_tim() must be atomic, so b43 trying to acquire a mutex leads to a kernel crash. This patch trades an easy to trigger crash in AP mode for an unlikely race condition. According to Michael, the real fix would be to allow set_tim() to sleep, since b43 is not the only driver that needs to sleep in all callbacks. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 86f35827f008..098dda1a67c1 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4521,9 +4521,8 @@ static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, { struct b43_wl *wl = hw_to_b43_wl(hw); - mutex_lock(&wl->mutex); + /* FIXME: add locking */ b43_update_templates(wl); - mutex_unlock(&wl->mutex); return 0; } From e1a6542f24fad84a132f79e13ca452c37df857c4 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 7 Nov 2009 19:14:47 +0100 Subject: [PATCH 295/743] rt2x00: update MAINTAINERS Although I have always been the active maintainer of the rt2x00 drivers, I was not mentioned explicitely in the MAINTAINERS file as such. Update the rt2x00 entry in the MAINTAINERS file to add my name and email address. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index c856aee0f1e2..b37e0cdd7632 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4280,6 +4280,7 @@ F: drivers/video/aty/aty128fb.c RALINK RT2X00 WIRELESS LAN DRIVER P: rt2x00 project +M: Ivo van Doorn L: linux-wireless@vger.kernel.org L: users@rt2x00.serialmonkey.com (moderated for non-subscribers) W: http://rt2x00.serialmonkey.com/ From bcfc56a8be48501810eba992937cabdcdb989297 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sun, 8 Nov 2009 21:59:00 -0500 Subject: [PATCH 296/743] ath5k: don't reset mcast filter when configuring the mode We should not zero out the multicast hash when configuring the operating mode, since a zero value means all multicast frames will get dropped. Also, ath5k_mode_setup() gets called after any reset, so the hash already set up in configure_filter() is lost. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 9c6ab5378f6e..95a8e232b58f 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1125,7 +1125,6 @@ ath5k_mode_setup(struct ath5k_softc *sc) /* configure operational mode */ ath5k_hw_set_opmode(ah); - ath5k_hw_set_mcast_filter(ah, 0, 0); ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt); } From 6f9797ae22abbf6ade3eb53431e34c3c39214329 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sun, 8 Nov 2009 21:59:01 -0500 Subject: [PATCH 297/743] ath5k: add LED support for HP Compaq CQ60 Add GPIO configuration for the Compaq CQ60 laptop Reported-by: David Dreggors Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/led.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c index b767c3b67b24..814872f70a64 100644 --- a/drivers/net/wireless/ath/ath5k/led.c +++ b/drivers/net/wireless/ath/ath5k/led.c @@ -69,6 +69,8 @@ static const struct pci_device_id ath5k_led_devices[] = { { ATH_SDEVICE(PCI_VENDOR_ID_AZWAVE, 0x1026), ATH_LED(3, 0) }, /* IBM ThinkPad AR5BXB6 (legovini@spiro.fisica.unipd.it) */ { ATH_SDEVICE(PCI_VENDOR_ID_IBM, 0x058a), ATH_LED(1, 0) }, + /* HP Compaq CQ60-206US (ddreggors@jumptv.com) */ + { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137a), ATH_LED(3, 1) }, /* HP Compaq C700 (nitrousnrg@gmail.com) */ { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 1) }, /* IBM-specific AR5212 (all others) */ From 1e93bd4a132661f9403b61b821810df5ba2dc0f8 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sun, 8 Nov 2009 21:59:02 -0500 Subject: [PATCH 298/743] ath5k: add LED definition for BenQ Joybook R55v Setup the GPIOs for the BenQ Joybook netbook. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/led.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c index 814872f70a64..b548c8eaaae1 100644 --- a/drivers/net/wireless/ath/ath5k/led.c +++ b/drivers/net/wireless/ath/ath5k/led.c @@ -63,6 +63,8 @@ static const struct pci_device_id ath5k_led_devices[] = { { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0422), ATH_LED(1, 1) }, /* E-machines E510 (tuliom@gmail.com) */ { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0428), ATH_LED(3, 0) }, + /* BenQ Joybook R55v (nowymarluk@wp.pl) */ + { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0100), ATH_LED(1, 0) }, /* Acer Extensa 5620z (nekoreeve@gmail.com) */ { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0105), ATH_LED(3, 0) }, /* Fukato Datacask Jupiter 1014a (mrb74@gmx.at) */ From 3da0d662e3911ca8345f049627533eeb1a2f820a Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 9 Nov 2009 16:56:06 -0600 Subject: [PATCH 299/743] rtl8187: Fix sparse warnings Due to a missing header include, sparse generates the following warnings: CHECK drivers/net/wireless/rtl818x/rtl8187_rfkill.c warning: symbol 'rtl8187_rfkill_init' was not declared. Should it be static? warning: symbol 'rtl8187_rfkill_poll' was not declared. Should it be static? warning: symbol 'rtl8187_rfkill_exit' was not declared. Should it be static? Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187_rfkill.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c index 9fab13e4004e..cad8037ab2af 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c +++ b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c @@ -18,6 +18,7 @@ #include #include "rtl8187.h" +#include "rtl8187_rfkill.h" static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv) { From 866d4700150656b928f366c395bab9ab0e1a06a3 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Mon, 9 Nov 2009 18:04:12 -0800 Subject: [PATCH 300/743] Libertas: coding style cleanup in ethtool.c Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/ethtool.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/libertas/ethtool.c b/drivers/net/wireless/libertas/ethtool.c index 039b555e4d76..6efa3882d0a6 100644 --- a/drivers/net/wireless/libertas/ethtool.c +++ b/drivers/net/wireless/libertas/ethtool.c @@ -175,10 +175,14 @@ static int lbs_ethtool_set_wol(struct net_device *dev, if (wol->wolopts & ~(WAKE_UCAST|WAKE_MCAST|WAKE_BCAST|WAKE_PHY)) return -EOPNOTSUPP; - if (wol->wolopts & WAKE_UCAST) criteria |= EHS_WAKE_ON_UNICAST_DATA; - if (wol->wolopts & WAKE_MCAST) criteria |= EHS_WAKE_ON_MULTICAST_DATA; - if (wol->wolopts & WAKE_BCAST) criteria |= EHS_WAKE_ON_BROADCAST_DATA; - if (wol->wolopts & WAKE_PHY) criteria |= EHS_WAKE_ON_MAC_EVENT; + if (wol->wolopts & WAKE_UCAST) + criteria |= EHS_WAKE_ON_UNICAST_DATA; + if (wol->wolopts & WAKE_MCAST) + criteria |= EHS_WAKE_ON_MULTICAST_DATA; + if (wol->wolopts & WAKE_BCAST) + criteria |= EHS_WAKE_ON_BROADCAST_DATA; + if (wol->wolopts & WAKE_PHY) + criteria |= EHS_WAKE_ON_MAC_EVENT; return lbs_host_sleep_cfg(priv, criteria, (struct wol_config *)NULL); } From c3b866ad7ef9a74fc2e0d7f0c5520ad09c8536f3 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Mon, 9 Nov 2009 18:04:13 -0800 Subject: [PATCH 301/743] Libertas: fix issues while configuring host sleep using ethtool wol Configuration of wake-on-lan for unicast, multicast, broadcast, physical activity was not working. Kernel panic issue was there when user tries to disable WOL. Fixed them. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/ethtool.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/libertas/ethtool.c b/drivers/net/wireless/libertas/ethtool.c index 6efa3882d0a6..53d56ab83c03 100644 --- a/drivers/net/wireless/libertas/ethtool.c +++ b/drivers/net/wireless/libertas/ethtool.c @@ -169,9 +169,6 @@ static int lbs_ethtool_set_wol(struct net_device *dev, struct lbs_private *priv = dev->ml_priv; uint32_t criteria = 0; - if (priv->wol_criteria == 0xffffffff && wol->wolopts) - return -EOPNOTSUPP; - if (wol->wolopts & ~(WAKE_UCAST|WAKE_MCAST|WAKE_BCAST|WAKE_PHY)) return -EOPNOTSUPP; @@ -183,6 +180,8 @@ static int lbs_ethtool_set_wol(struct net_device *dev, criteria |= EHS_WAKE_ON_BROADCAST_DATA; if (wol->wolopts & WAKE_PHY) criteria |= EHS_WAKE_ON_MAC_EVENT; + if (wol->wolopts == 0) + criteria |= EHS_REMOVE_WAKEUP; return lbs_host_sleep_cfg(priv, criteria, (struct wol_config *)NULL); } From 73871f7181a1406c67e93c8c83f5edb26057a2a6 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 6 Nov 2009 15:17:04 -0800 Subject: [PATCH 302/743] iwlwifi: Use RTS/CTS as the preferred protection mechanism for 6000 series When 802.11g was introduced, we had RTS/CTS and CTS-to-Self protection mechanisms. In an HT Beacon, HT stations use the "Operating Mode" field in the HT Information Element to determine whether or not to use protection. The Operating Mode field has 4 possible settings: 0-3: Mode 0: If all stations in the BSS are 20/40 MHz HT capable, or if the BSS is 20/40 MHz capable, or if all stations in the BSS are 20 MHz HT stations in a 20 MHz BSS Mode 1: used if there are non-HT stations or APs using the primary or secondary channels Mode 2: if only HT stations are associated in the BSS and at least one 20 MHz HT station is associated. Mode 3: used if one or more non-HT stations are associated in the BSS. When in operating modes 1 or 3, and the Use_Protection field is 1 in the Beacon's ERP IE, all HT transmissions must be protected using RTS/CTS or CTS-to-Self. By default, CTS-to-self is the preferred protection mechanism for less overhead and higher throughput; but using the full RTS/CTS will better protect the inner exchange from interference, especially in highly-congested environment. For 6000 series WIFI NIC, RTS/CTS protection mechanism is the recommended choice for HT traffic based on the HW design. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-6000.c | 5 +++++ drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 9 +++++++++ drivers/net/wireless/iwlwifi/iwl-agn.c | 10 +++++++--- drivers/net/wireless/iwlwifi/iwl-core.h | 2 ++ 4 files changed, 23 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index c295b8ee9228..1473452ba22f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -175,6 +175,7 @@ struct iwl_cfg iwl6000h_2agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; /* @@ -198,6 +199,7 @@ struct iwl_cfg iwl6000i_2agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; struct iwl_cfg iwl6050_2agn_cfg = { @@ -218,6 +220,7 @@ struct iwl_cfg iwl6050_2agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; struct iwl_cfg iwl6000_3agn_cfg = { @@ -238,6 +241,7 @@ struct iwl_cfg iwl6000_3agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; struct iwl_cfg iwl6050_3agn_cfg = { @@ -258,6 +262,7 @@ struct iwl_cfg iwl6050_3agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX)); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 346dc06fa7b7..81726ee32858 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -418,6 +418,15 @@ static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, else if (tid == IWL_AGG_ALL_TID) for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++) rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); + if (priv->cfg->use_rts_for_ht) { + /* + * switch to RTS/CTS if it is the prefer protection method + * for HT traffic + */ + IWL_DEBUG_HT(priv, "use RTS/CTS protection for HT\n"); + priv->staging_rxon.flags &= ~RXON_FLG_SELF_CTS_EN; + iwlcore_commit_rxon(priv); + } } static inline int get_num_of_ant_from_rate(u32 rate_n_flags) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 9b5ea8ba7216..877af443aac0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -115,9 +115,6 @@ int iwl_commit_rxon(struct iwl_priv *priv) /* always get timestamp with Rx frame */ priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK; - /* allow CTS-to-self if possible. this is relevant only for - * 5000, but will not damage 4965 */ - priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN; ret = iwl_check_rxon_cmd(priv); if (ret) { @@ -217,6 +214,13 @@ int iwl_commit_rxon(struct iwl_priv *priv) "Could not send WEP static key.\n"); } + /* + * allow CTS-to-self if possible for new association. + * this is relevant only for 5000 series and up, + * but will not damage 4965 + */ + priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN; + /* Apply the new configuration * RXON assoc doesn't clear the station table in uCode, */ diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index e50103a956b1..7754538c2194 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -213,6 +213,7 @@ struct iwl_mod_params { * @pa_type: used by 6000 series only to identify the type of Power Amplifier * @max_ll_items: max number of OTP blocks * @shadow_ram_support: shadow support for OTP memory + * @use_rts_for_ht: use rts/cts protection for HT traffic * * We enable the driver to be backward compatible wrt API version. The * driver specifies which APIs it supports (with @ucode_api_max being the @@ -255,6 +256,7 @@ struct iwl_cfg { const bool shadow_ram_support; const bool ht_greenfield_support; const bool broken_powersave; + bool use_rts_for_ht; }; /*************************** From d01032e4fd33110f9f3a085a36cb819c1dfc5827 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 6 Nov 2009 15:17:05 -0800 Subject: [PATCH 303/743] iwlwifi: Fix issue on file transfer stalled in HT mode Turn on RTS/CTS for HT to prevent uCode TX fifo underrun This is fix for http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2103 Signed-off-by: Wey-Yi Guy Tested-by: Jiajia Zheng Signed-off-by: Reinette Chatre Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-1000.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index 2716b91ba9fa..950267ab556a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -161,5 +161,6 @@ struct iwl_cfg iwl1000_bgn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_1000, .shadow_ram_support = false, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; From ee90732456fe8e75406fdd3cd136a4bfb7ce31f5 Mon Sep 17 00:00:00 2001 From: Tao Hu Date: Tue, 10 Nov 2009 18:55:17 -0800 Subject: [PATCH 304/743] omap: Fix race condition in omap dma driver The bug could cause irq enable bit of one DMA channel is cleared/set unexpectedly when 2 (or more) drivers are calling omap_request_dma()/omap_free_dma() simultaneously Signed-off-by: Fei Yang Signed-off-by: Tao Hu Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index b53125f41293..02ed94526aa3 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -691,13 +691,16 @@ static inline void disable_lnk(int lch) static inline void omap2_enable_irq_lch(int lch) { u32 val; + unsigned long flags; if (!cpu_class_is_omap2()) return; + spin_lock_irqsave(&dma_chan_lock, flags); val = dma_read(IRQENABLE_L0); val |= 1 << lch; dma_write(val, IRQENABLE_L0); + spin_unlock_irqrestore(&dma_chan_lock, flags); } int omap_request_dma(int dev_id, const char *dev_name, @@ -799,10 +802,13 @@ void omap_free_dma(int lch) if (cpu_class_is_omap2()) { u32 val; + + spin_lock_irqsave(&dma_chan_lock, flags); /* Disable interrupts */ val = dma_read(IRQENABLE_L0); val &= ~(1 << lch); dma_write(val, IRQENABLE_L0); + spin_unlock_irqrestore(&dma_chan_lock, flags); /* Clear the CSR register and IRQ status register */ dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch)); From 6d1352420901b0a74e6149a891ff4457f7199651 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Tue, 10 Nov 2009 18:55:19 -0800 Subject: [PATCH 305/743] omap: Use resource_size Use the resource_size function instead of manually calculating the resource size. This reduces the chance of introducing off-by-one errors and actually fixes one in mailbox.c. Signed-off-by: Tobias Klauser Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 2 +- arch/arm/mach-omap2/mailbox.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 15876828db23..f8657568b1ba 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -366,7 +366,7 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) if (r < 0) goto out; - gpmc_cs_enable_mem(cs, res->start, res->end - res->start + 1); + gpmc_cs_enable_mem(cs, res->start, resource_size(res)); *base = res->start; gpmc_cs_set_reserved(cs, 1); out: diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index c035ad3426d0..ef57b38a56a4 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -300,7 +300,7 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev) dev_err(&pdev->dev, "invalid mem resource\n"); return -ENODEV; } - mbox_base = ioremap(res->start, res->end - res->start); + mbox_base = ioremap(res->start, resource_size(res)); if (!mbox_base) return -ENOMEM; From f56ab498db55f1b7f5219aa5c7a04d562392cbb8 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 6 Oct 2009 10:52:50 -0500 Subject: [PATCH 306/743] powerpc: pasemi_defconfig update pasemi_defconfig hasn't been updated for a year. Mostly a refresh of defaults, but this also disables 64K pages. Signed-off-by: Olof Johansson Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/pasemi_defconfig | 630 +++++++++++++++++++------- 1 file changed, 462 insertions(+), 168 deletions(-) diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig index 4f8681cc8d77..20ba0cfff8ba 100644 --- a/arch/powerpc/configs/pasemi_defconfig +++ b/arch/powerpc/configs/pasemi_defconfig @@ -1,49 +1,58 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Tue May 27 16:08:06 2008 +# Linux kernel version: 2.6.32-rc3 +# Tue Oct 6 10:27:18 2009 # CONFIG_PPC64=y # # Processor support # +CONFIG_PPC_BOOK3S_64=y +# CONFIG_PPC_BOOK3E_64 is not set +CONFIG_PPC_BOOK3S=y CONFIG_POWER4_ONLY=y CONFIG_POWER4=y # CONFIG_TUNE_CELL is not set CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y +# CONFIG_VSX is not set CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_64=y CONFIG_PPC_MM_SLICES=y # CONFIG_VIRT_CPU_ACCOUNTING is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y +CONFIG_PPC_PERF_CTRS=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_64BIT=y CONFIG_WORD_SIZE=64 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_ARCH_HAS_ILOG2_U64=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -51,11 +60,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set # CONFIG_PPC_OF_PLATFORM_PCI is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -72,10 +84,20 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=64 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -84,13 +106,17 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -98,32 +124,52 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +CONFIG_EVENT_PROFILE=y +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y -# CONFIG_MARKERS is not set +CONFIG_TRACEPOINTS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_SYSCALL_WRAPPERS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -131,11 +177,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # @@ -150,19 +195,14 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set +CONFIG_PPC_MSI_BITMAP=y # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set CONFIG_PPC_PASEMI=y @@ -178,8 +218,10 @@ CONFIG_PPC_PASEMI_MDIO=y # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_IBM_CELL_BLADE is not set # CONFIG_PPC_CELLEB is not set +# CONFIG_PPC_CELL_QPACE is not set # CONFIG_PQ2ADS is not set CONFIG_PPC_NATIVE=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -213,6 +255,7 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y # CONFIG_PPC_PASEMI_CPUFREQ=y # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -226,16 +269,19 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y CONFIG_IOMMU_HELPER=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -243,6 +289,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set # CONFIG_NUMA is not set +CONFIG_MAX_ACTIVE_REGIONS=256 CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -253,20 +300,28 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_RESOURCES_64BIT=y +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_HAS_HASH_64K=y +# CONFIG_PPC_4K_PAGES is not set +# CONFIG_PPC_16K_PAGES is not set CONFIG_PPC_64K_PAGES=y +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=9 # CONFIG_PPC_SUBPAGE_PROT is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -285,6 +340,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set CONFIG_PCCARD=y CONFIG_PCMCIA_DEBUG=y CONFIG_PCMCIA=y @@ -301,13 +358,10 @@ CONFIG_CARDBUS=y CONFIG_ELECTRA_CF=y # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set +# CONFIG_RELOCATABLE is not set CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 - -# -# Networking -# CONFIG_NET=y # @@ -356,9 +410,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -368,25 +424,32 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # -# Wireless +# CFG80211 needs to be enabled for MAC80211 # -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -398,15 +461,19 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y # CONFIG_MTD_PARTITIONS is not set @@ -477,12 +544,18 @@ CONFIG_MTD_NAND_PASEMI=y # CONFIG_MTD_NAND_FSL_ELBC is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -501,29 +574,41 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -CONFIG_BLK_DEV_IDESCSI=y CONFIG_IDE_TASK_IOCTL=y CONFIG_IDE_PROC_FS=y @@ -542,14 +627,13 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -563,8 +647,6 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -586,10 +668,6 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y @@ -606,6 +684,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -614,11 +694,16 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -626,7 +711,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -637,10 +721,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set CONFIG_SATA_SIL24=y @@ -662,6 +750,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -690,6 +779,7 @@ CONFIG_ATA_GENERIC=y CONFIG_PATA_PCMCIA=y # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -703,12 +793,15 @@ CONFIG_PATA_OF_PLATFORM=y # CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=y CONFIG_MD_RAID456=y -CONFIG_MD_RAID5_RESHAPE=y +# CONFIG_MULTICORE_RAID456 is not set +CONFIG_MD_RAID6_PQ=y +# CONFIG_ASYNC_RAID6_TEST is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y @@ -725,12 +818,19 @@ CONFIG_DM_CRYPT=y # # IEEE 1394 (FireWire) support # + +# +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -753,6 +853,9 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -761,19 +864,23 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -783,19 +890,22 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -806,30 +916,40 @@ CONFIG_E1000_NAPI=y # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set CONFIG_PASEMI_MAC=y +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -874,17 +994,23 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -900,6 +1026,7 @@ CONFIG_INPUT_MOUSE=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -926,10 +1053,13 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=4 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_PASEMI=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -948,57 +1078,85 @@ CONFIG_MAX_RAW_DEVS=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -CONFIG_I2C_PASEMI=y -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_PASEMI=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_EEPROM_LEGACY=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -1006,14 +1164,17 @@ CONFIG_HWMON_VID=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1028,10 +1189,14 @@ CONFIG_SENSORS_LM85=y CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1039,6 +1204,8 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1050,44 +1217,40 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y CONFIG_DRM=y +CONFIG_DRM_KMS_HELPER=y +CONFIG_DRM_TTM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set CONFIG_DRM_RADEON=y @@ -1099,6 +1262,7 @@ CONFIG_VGASTATE=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1140,6 +1304,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -1148,12 +1313,16 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_GENERIC=y # # Display device support @@ -1177,15 +1346,9 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1198,24 +1361,24 @@ CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_RAWMIDI_SEQ=y +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set @@ -1234,6 +1397,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set @@ -1246,6 +1410,8 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1262,6 +1428,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -1277,57 +1444,64 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set - -# -# ALSA PowerMac devices -# - -# -# ALSA PowerPC devices -# - -# -# USB devices -# +CONFIG_SND_PPC=y +CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=y CONFIG_SND_USB_USX2Y=y # CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# +CONFIG_SND_PCMCIA=y # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=y +# CONFIG_SMARTJOYPLUS_FF is not set +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +# CONFIG_THRUSTMASTER_FF is not set +CONFIG_HID_ZEROPLUS=y +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1343,18 +1517,26 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1363,6 +1545,8 @@ CONFIG_USB_UHCI_HCD=y CONFIG_USB_SL811_HCD=y # CONFIG_USB_SL811_CS is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1370,20 +1554,20 @@ CONFIG_USB_SL811_HCD=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1399,7 +1583,6 @@ CONFIG_USB_LIBUSUAL=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1412,7 +1595,7 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1420,7 +1603,6 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1429,7 +1611,15 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1443,6 +1633,7 @@ CONFIG_EDAC=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_PASEMI=y +# CONFIG_EDAC_CPC925 is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1472,6 +1663,9 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1481,20 +1675,30 @@ CONFIG_RTC_DRV_DS1307=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + # # File systems # @@ -1504,11 +1708,13 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1516,6 +1722,10 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1524,6 +1734,11 @@ CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1549,16 +1764,14 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=y - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1578,8 +1791,10 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1590,18 +1805,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1672,25 +1886,30 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m +# CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1700,18 +1919,25 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1721,26 +1947,71 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y +# CONFIG_PPC_EMULATED_STATS is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y +CONFIG_DEBUGGER=y # CONFIG_IRQSTACKS is not set +# CONFIG_VIRQ_DEBUG is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1749,23 +2020,34 @@ CONFIG_XMON_DISASSEMBLY=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y +CONFIG_ASYNC_PQ=y +CONFIG_ASYNC_RAID6_RECOV=y CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -1793,14 +2075,20 @@ CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y @@ -1830,7 +2118,13 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set From bf3204cbff7d2606e758afb0994e8da6ae1c6c26 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 6 Nov 2009 21:39:07 -0800 Subject: [PATCH 307/743] Input: fix locking in memoryless force-feedback devices Now that input core acquires dev->event_lock spinlock and disables interrupts when propagating input events, using spin_lock_bh() in ff-memless driver is not allowed. Actually, the timer_lock itself is not needed anymore, we should simply use dev->event_lock as well. Also do a small cleanup in force-feedback core. Reported-by: kerneloops.org Reported-by: http://www.kerneloops.org/searchweek.php?search=ml_ff_set_gain Reported-by: Arjan van de Ven Signed-off-by: Dmitry Torokhov --- drivers/input/ff-core.c | 20 +++++++++++--------- drivers/input/ff-memless.c | 26 +++++++++++--------------- include/linux/input.h | 4 ++++ 3 files changed, 26 insertions(+), 24 deletions(-) diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c index 72c63e5dd630..38df81fcdc3a 100644 --- a/drivers/input/ff-core.c +++ b/drivers/input/ff-core.c @@ -337,16 +337,16 @@ int input_ff_create(struct input_dev *dev, int max_effects) dev->ff = ff; dev->flush = flush_effects; dev->event = input_ff_event; - set_bit(EV_FF, dev->evbit); + __set_bit(EV_FF, dev->evbit); /* Copy "true" bits into ff device bitmap */ for (i = 0; i <= FF_MAX; i++) if (test_bit(i, dev->ffbit)) - set_bit(i, ff->ffbit); + __set_bit(i, ff->ffbit); /* we can emulate RUMBLE with periodic effects */ if (test_bit(FF_PERIODIC, ff->ffbit)) - set_bit(FF_RUMBLE, dev->ffbit); + __set_bit(FF_RUMBLE, dev->ffbit); return 0; } @@ -362,12 +362,14 @@ EXPORT_SYMBOL_GPL(input_ff_create); */ void input_ff_destroy(struct input_dev *dev) { - clear_bit(EV_FF, dev->evbit); - if (dev->ff) { - if (dev->ff->destroy) - dev->ff->destroy(dev->ff); - kfree(dev->ff->private); - kfree(dev->ff); + struct ff_device *ff = dev->ff; + + __clear_bit(EV_FF, dev->evbit); + if (ff) { + if (ff->destroy) + ff->destroy(ff); + kfree(ff->private); + kfree(ff); dev->ff = NULL; } } diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c index 2d1415e16834..b483b2995fa9 100644 --- a/drivers/input/ff-memless.c +++ b/drivers/input/ff-memless.c @@ -61,7 +61,6 @@ struct ml_device { struct ml_effect_state states[FF_MEMLESS_EFFECTS]; int gain; struct timer_list timer; - spinlock_t timer_lock; struct input_dev *dev; int (*play_effect)(struct input_dev *dev, void *data, @@ -368,38 +367,38 @@ static void ml_effect_timer(unsigned long timer_data) { struct input_dev *dev = (struct input_dev *)timer_data; struct ml_device *ml = dev->ff->private; + unsigned long flags; debug("timer: updating effects"); - spin_lock(&ml->timer_lock); + spin_lock_irqsave(&dev->event_lock, flags); ml_play_effects(ml); - spin_unlock(&ml->timer_lock); + spin_unlock_irqrestore(&dev->event_lock, flags); } +/* + * Sets requested gain for FF effects. Called with dev->event_lock held. + */ static void ml_ff_set_gain(struct input_dev *dev, u16 gain) { struct ml_device *ml = dev->ff->private; int i; - spin_lock_bh(&ml->timer_lock); - ml->gain = gain; for (i = 0; i < FF_MEMLESS_EFFECTS; i++) __clear_bit(FF_EFFECT_PLAYING, &ml->states[i].flags); ml_play_effects(ml); - - spin_unlock_bh(&ml->timer_lock); } +/* + * Start/stop specified FF effect. Called with dev->event_lock held. + */ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) { struct ml_device *ml = dev->ff->private; struct ml_effect_state *state = &ml->states[effect_id]; - unsigned long flags; - - spin_lock_irqsave(&ml->timer_lock, flags); if (value > 0) { debug("initiated play"); @@ -425,8 +424,6 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) ml_play_effects(ml); } - spin_unlock_irqrestore(&ml->timer_lock, flags); - return 0; } @@ -436,7 +433,7 @@ static int ml_ff_upload(struct input_dev *dev, struct ml_device *ml = dev->ff->private; struct ml_effect_state *state = &ml->states[effect->id]; - spin_lock_bh(&ml->timer_lock); + spin_lock_irq(&dev->event_lock); if (test_bit(FF_EFFECT_STARTED, &state->flags)) { __clear_bit(FF_EFFECT_PLAYING, &state->flags); @@ -448,7 +445,7 @@ static int ml_ff_upload(struct input_dev *dev, ml_schedule_timer(ml); } - spin_unlock_bh(&ml->timer_lock); + spin_unlock_irq(&dev->event_lock); return 0; } @@ -482,7 +479,6 @@ int input_ff_create_memless(struct input_dev *dev, void *data, ml->private = data; ml->play_effect = play_effect; ml->gain = 0xffff; - spin_lock_init(&ml->timer_lock); setup_timer(&ml->timer, ml_effect_timer, (unsigned long)dev); set_bit(FF_GAIN, dev->ffbit); diff --git a/include/linux/input.h b/include/linux/input.h index 0ccfc30cd40f..c2b1a7d244d9 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1377,6 +1377,10 @@ extern struct class input_class; * methods; erase() is optional. set_gain() and set_autocenter() need * only be implemented if driver sets up FF_GAIN and FF_AUTOCENTER * bits. + * + * Note that playback(), set_gain() and set_autocenter() are called with + * dev->event_lock spinlock held and interrupts off and thus may not + * sleep. */ struct ff_device { int (*upload)(struct input_dev *dev, struct ff_effect *effect, From 71121d9fcc494453b9311992de220abb47dde3f1 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 10 Nov 2009 20:11:55 +0100 Subject: [PATCH 308/743] ALSA: hda - possible read past array alc88[02]_parse_auto_config() The test of index `i' is after the read - too late - and unsafe: if snd_hda_get_connections() fails in the last iteration a read beyond the array is possible. Signed-off-by: Roel Kluin Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d1ccb6eaf9fc..daf6975b0c2e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4684,9 +4684,9 @@ static int alc880_parse_auto_config(struct hda_codec *codec) spec->multiout.dig_out_nid = dig_nid; else { spec->multiout.slave_dig_outs = spec->slave_dig_outs; - spec->slave_dig_outs[i - 1] = dig_nid; - if (i == ARRAY_SIZE(spec->slave_dig_outs) - 1) + if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1) break; + spec->slave_dig_outs[i - 1] = dig_nid; } } if (spec->autocfg.dig_in_pin) @@ -9813,9 +9813,9 @@ static int alc882_parse_auto_config(struct hda_codec *codec) spec->multiout.dig_out_nid = dig_nid; else { spec->multiout.slave_dig_outs = spec->slave_dig_outs; - spec->slave_dig_outs[i - 1] = dig_nid; - if (i == ARRAY_SIZE(spec->slave_dig_outs) - 1) + if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1) break; + spec->slave_dig_outs[i - 1] = dig_nid; } } if (spec->autocfg.dig_in_pin) From 96d25e532234bec1a1989e6e1baf702d43a78b0d Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Nov 2009 16:15:42 +0900 Subject: [PATCH 309/743] NFSv4: Fix a cache validation bug which causes getcwd() to return ENOENT Changeset a65318bf3afc93ce49227e849d213799b072c5fd (NFSv4: Simplify some cache consistency post-op GETATTRs) incorrectly changed the getattr bitmap for readdir(). This causes the readdir() function to fail to return a fileid/inode number, which again exposed a bug in the NFS readdir code that causes spurious ENOENT errors to appear in applications (see http://bugzilla.kernel.org/show_bug.cgi?id=14541). The immediate band aid is to revert the incorrect bitmap change, but more long term, we should change the NFS readdir code to cope with the fact that NFSv4 servers are not required to support fileids/inode numbers. Reported-by: Daniel J Blueman Cc: stable@kernel.org Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index ff37454fa783..741a562177fc 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2767,7 +2767,7 @@ static int _nfs4_proc_readdir(struct dentry *dentry, struct rpc_cred *cred, .pages = &page, .pgbase = 0, .count = count, - .bitmask = NFS_SERVER(dentry->d_inode)->cache_consistency_bitmask, + .bitmask = NFS_SERVER(dentry->d_inode)->attr_bitmask, }; struct nfs4_readdir_res res; struct rpc_message msg = { From ea0174a7137c8ca9f130ca681f3a99c872da6778 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 12 Oct 2009 21:34:27 -0500 Subject: [PATCH 310/743] ext3: retry failed direct IO allocations On a 256M 4k block filesystem, doing this in a loop: dd if=/dev/zero of=test oflag=direct bs=1M count=64 rm -f test eventually leads to spurious ENOSPC: dd: writing `test': No space left on device As with other block allocation callers, it looks like we need to potentially retry the allocations on the initial ENOSPC. A similar patch went into ext4 (commit fbbf69456619de5d251cb9f1df609069178c62d5) Signed-off-by: Eric Sandeen Signed-off-by: Jan Kara --- fs/ext3/inode.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index acf1b1423327..069a163393b4 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -1735,6 +1735,7 @@ static ssize_t ext3_direct_IO(int rw, struct kiocb *iocb, ssize_t ret; int orphan = 0; size_t count = iov_length(iov, nr_segs); + int retries = 0; if (rw == WRITE) { loff_t final_size = offset + count; @@ -1757,9 +1758,12 @@ static ssize_t ext3_direct_IO(int rw, struct kiocb *iocb, } } +retry: ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov, offset, nr_segs, ext3_get_block, NULL); + if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries)) + goto retry; if (orphan) { int err; From fe8bc91c4c30122b357d197117705cfd4fabaf28 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 16 Oct 2009 19:26:15 +0200 Subject: [PATCH 311/743] ext3: Wait for proper transaction commit on fsync We cannot rely on buffer dirty bits during fsync because pdflush can come before fsync is called and clear dirty bits without forcing a transaction commit. What we do is that we track which transaction has last changed the inode and which transaction last changed allocation and force it to disk on fsync. Signed-off-by: Jan Kara Reviewed-by: Aneesh Kumar K.V --- fs/ext3/fsync.c | 36 ++++++++++++++++-------------------- fs/ext3/inode.c | 32 +++++++++++++++++++++++++++++++- fs/ext3/super.c | 2 ++ include/linux/ext3_fs_i.h | 8 ++++++++ 4 files changed, 57 insertions(+), 21 deletions(-) diff --git a/fs/ext3/fsync.c b/fs/ext3/fsync.c index 451d166bbe93..8209f266e9ad 100644 --- a/fs/ext3/fsync.c +++ b/fs/ext3/fsync.c @@ -46,19 +46,21 @@ int ext3_sync_file(struct file * file, struct dentry *dentry, int datasync) { struct inode *inode = dentry->d_inode; + struct ext3_inode_info *ei = EXT3_I(inode); + journal_t *journal = EXT3_SB(inode->i_sb)->s_journal; int ret = 0; + tid_t commit_tid; + + if (inode->i_sb->s_flags & MS_RDONLY) + return 0; J_ASSERT(ext3_journal_current_handle() == NULL); /* - * data=writeback: + * data=writeback,ordered: * The caller's filemap_fdatawrite()/wait will sync the data. - * sync_inode() will sync the metadata - * - * data=ordered: - * The caller's filemap_fdatawrite() will write the data and - * sync_inode() will write the inode if it is dirty. Then the caller's - * filemap_fdatawait() will wait on the pages. + * Metadata is in the journal, we wait for a proper transaction + * to commit here. * * data=journal: * filemap_fdatawrite won't do anything (the buffers are clean). @@ -73,22 +75,16 @@ int ext3_sync_file(struct file * file, struct dentry *dentry, int datasync) goto out; } - if (datasync && !(inode->i_state & I_DIRTY_DATASYNC)) - goto flush; + if (datasync) + commit_tid = atomic_read(&ei->i_datasync_tid); + else + commit_tid = atomic_read(&ei->i_sync_tid); - /* - * The VFS has written the file data. If the inode is unaltered - * then we need not start a commit. - */ - if (inode->i_state & (I_DIRTY_SYNC|I_DIRTY_DATASYNC)) { - struct writeback_control wbc = { - .sync_mode = WB_SYNC_ALL, - .nr_to_write = 0, /* sys_fsync did this */ - }; - ret = sync_inode(inode, &wbc); + if (log_start_commit(journal, commit_tid)) { + log_wait_commit(journal, commit_tid); goto out; } -flush: + /* * In case we didn't commit a transaction, we have to flush * disk caches manually so that data really is on persistent diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 069a163393b4..354ed3b47b30 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -699,8 +699,9 @@ static int ext3_splice_branch(handle_t *handle, struct inode *inode, int err = 0; struct ext3_block_alloc_info *block_i; ext3_fsblk_t current_block; + struct ext3_inode_info *ei = EXT3_I(inode); - block_i = EXT3_I(inode)->i_block_alloc_info; + block_i = ei->i_block_alloc_info; /* * If we're splicing into a [td]indirect block (as opposed to the * inode) then we need to get write access to the [td]indirect block @@ -741,6 +742,8 @@ static int ext3_splice_branch(handle_t *handle, struct inode *inode, inode->i_ctime = CURRENT_TIME_SEC; ext3_mark_inode_dirty(handle, inode); + /* ext3_mark_inode_dirty already updated i_sync_tid */ + atomic_set(&ei->i_datasync_tid, handle->h_transaction->t_tid); /* had we spliced it onto indirect block? */ if (where->bh) { @@ -2754,6 +2757,8 @@ struct inode *ext3_iget(struct super_block *sb, unsigned long ino) struct ext3_inode_info *ei; struct buffer_head *bh; struct inode *inode; + journal_t *journal = EXT3_SB(sb)->s_journal; + transaction_t *transaction; long ret; int block; @@ -2831,6 +2836,30 @@ struct inode *ext3_iget(struct super_block *sb, unsigned long ino) ei->i_data[block] = raw_inode->i_block[block]; INIT_LIST_HEAD(&ei->i_orphan); + /* + * Set transaction id's of transactions that have to be committed + * to finish f[data]sync. We set them to currently running transaction + * as we cannot be sure that the inode or some of its metadata isn't + * part of the transaction - the inode could have been reclaimed and + * now it is reread from disk. + */ + if (journal) { + tid_t tid; + + spin_lock(&journal->j_state_lock); + if (journal->j_running_transaction) + transaction = journal->j_running_transaction; + else + transaction = journal->j_committing_transaction; + if (transaction) + tid = transaction->t_tid; + else + tid = journal->j_commit_sequence; + spin_unlock(&journal->j_state_lock); + atomic_set(&ei->i_sync_tid, tid); + atomic_set(&ei->i_datasync_tid, tid); + } + if (inode->i_ino >= EXT3_FIRST_INO(inode->i_sb) + 1 && EXT3_INODE_SIZE(inode->i_sb) > EXT3_GOOD_OLD_INODE_SIZE) { /* @@ -3015,6 +3044,7 @@ again: err = rc; ei->i_state &= ~EXT3_STATE_NEW; + atomic_set(&ei->i_sync_tid, handle->h_transaction->t_tid); out_brelse: brelse (bh); ext3_std_error(inode->i_sb, err); diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 7a520a862f49..427496c4767c 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -466,6 +466,8 @@ static struct inode *ext3_alloc_inode(struct super_block *sb) return NULL; ei->i_block_alloc_info = NULL; ei->vfs_inode.i_version = 1; + atomic_set(&ei->i_datasync_tid, 0); + atomic_set(&ei->i_sync_tid, 0); return &ei->vfs_inode; } diff --git a/include/linux/ext3_fs_i.h b/include/linux/ext3_fs_i.h index ca1bfe90004f..93e7428156ba 100644 --- a/include/linux/ext3_fs_i.h +++ b/include/linux/ext3_fs_i.h @@ -137,6 +137,14 @@ struct ext3_inode_info { * by other means, so we have truncate_mutex. */ struct mutex truncate_mutex; + + /* + * Transactions that contain inode's metadata needed to complete + * fsync and fdatasync, respectively. + */ + atomic_t i_sync_tid; + atomic_t i_datasync_tid; + struct inode vfs_inode; }; From 7b02bec07efe1d6c7d48c786e0c1a38d28fe7245 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Tue, 10 Nov 2009 17:13:22 +0800 Subject: [PATCH 312/743] JBD/JBD2: free j_wbuf if journal init fails. If journal init fails, we need to free j_wbuf. Cc: Andrew Morton Cc: Jan Kara Signed-off-by: Tao Ma Signed-off-by: Jan Kara --- fs/jbd/journal.c | 2 ++ fs/jbd2/journal.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index bd3c073b485d..49d5cd6053c8 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -756,6 +756,7 @@ journal_t * journal_init_dev(struct block_device *bdev, return journal; out_err: + kfree(journal->j_wbuf); kfree(journal); return NULL; } @@ -820,6 +821,7 @@ journal_t * journal_init_inode (struct inode *inode) return journal; out_err: + kfree(journal->j_wbuf); kfree(journal); return NULL; } diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index b0ab5219becb..fed85388ee86 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -913,6 +913,7 @@ journal_t * jbd2_journal_init_dev(struct block_device *bdev, return journal; out_err: + kfree(journal->j_wbuf); jbd2_stats_proc_exit(journal); kfree(journal); return NULL; @@ -986,6 +987,7 @@ journal_t * jbd2_journal_init_inode (struct inode *inode) return journal; out_err: + kfree(journal->j_wbuf); jbd2_stats_proc_exit(journal); kfree(journal); return NULL; From 690e744869f3262855b83b4fb59199cf142765b0 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 19 Oct 2009 19:55:13 -0400 Subject: [PATCH 313/743] [SCSI] gdth: Prevent negative offsets in ioctl CVE-2009-3080 A negative offset could be used to index before the event buffer and lead to a security breach. Signed-off-by: Dave Jones Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/scsi/gdth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index 185e6bc4dd40..9e8fce0f0c1b 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -2900,7 +2900,7 @@ static int gdth_read_event(gdth_ha_str *ha, int handle, gdth_evt_str *estr) eindex = handle; estr->event_source = 0; - if (eindex >= MAX_EVENTS) { + if (eindex < 0 || eindex >= MAX_EVENTS) { spin_unlock_irqrestore(&ha->smp_lock, flags); return eindex; } From 1a0f437235ccb15361bfe0a37c7023f6234c2e9f Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 22:05:34 +0000 Subject: [PATCH 314/743] [SCSI] bfa: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Acked-by: Jing Huang Signed-off-by: James Bottomley --- drivers/scsi/bfa/bfad_fwimg.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/bfa/bfad_fwimg.c b/drivers/scsi/bfa/bfad_fwimg.c index b2f6949bc8d3..bd34b0db2d6b 100644 --- a/drivers/scsi/bfa/bfad_fwimg.c +++ b/drivers/scsi/bfa/bfad_fwimg.c @@ -41,6 +41,8 @@ u32 *bfi_image_cb; #define BFAD_FW_FILE_CT "ctfw.bin" #define BFAD_FW_FILE_CB "cbfw.bin" +MODULE_FIRMWARE(BFAD_FW_FILE_CT); +MODULE_FIRMWARE(BFAD_FW_FILE_CB); u32 * bfad_read_firmware(struct pci_dev *pdev, u32 **bfi_image, From 8561a84f85eccddf46212622f1f18317a220891b Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Wed, 11 Nov 2009 11:00:03 -0800 Subject: [PATCH 315/743] omap: Fix omapfb/lcdc on OMAP1510 broken when PM set With CONFIG_PM=y, the omapfb/lcdc device on Amstrad Delta, after initially starting correctly, breaks with the following error messages: omapfb omapfb: resetting (status 0xffffff96,reset count 1) ... omapfb omapfb: resetting (status 0xffffff96,reset count 100) omapfb omapfb: too many reset attempts, giving up. Looking closer at this I have found that it had been broken almost 2 years ago with commit 2418996e3b100114edb2ae110d5d4acb928909d2, PM fixes for OMAP1. The definite reason for broken omapfb/lcdc behavoiur in PM mode appeared to be ARM_IDLECT1:IDLIF_ARM (bit 6) put into idle regardless of LCD DMA possibly running. The bit were set based on return value of the omap_dma_running() function that did not check for dedicated LCD DMA channel status. The patch below fixes this. Note that the hardcoded register value will be fixed during the next merge cycle to use OMAP_LCDC_ defines. Currently the OMAP_LCDC_ defines are local to drivers/video/omap/lcdc.c, so let's not start moving those right now. Created against linux-2.6.32-rc6 Tested on Amstrad Delta Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 02ed94526aa3..68eaae324b6a 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1114,6 +1114,14 @@ int omap_dma_running(void) { int lch; + /* + * On OMAP1510, internal LCD controller will start the transfer + * when it gets enabled, so assume DMA running if LCD enabled. + */ + if (cpu_is_omap1510()) + if (omap_readw(0xfffec000 + 0x00) & (1 << 0)) + return 1; + /* Check if LCD DMA is running */ if (cpu_is_omap16xx()) if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) From 01943244552c6c747050e7d9d3a10ce31030b4e6 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Wed, 11 Nov 2009 11:00:34 -0800 Subject: [PATCH 316/743] omap1: Amstrad Delta defconfig fixes The patch provides the following fixes: - keep kernel small enough to boot with standard tools, - ensure compatibility with both new and legacy distros, - turn on support for recently added or fixed hardware features. Created and tested against linux-2.6.32-rc5. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/configs/ams_delta_defconfig | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig index 764732529ea3..e8f7380b67d6 100644 --- a/arch/arm/configs/ams_delta_defconfig +++ b/arch/arm/configs/ams_delta_defconfig @@ -55,10 +55,10 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y -# CONFIG_EMBEDDED is not set +CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS is not set # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -224,7 +224,7 @@ CONFIG_CPU_CP15_MMU=y # # Processor Features # -# CONFIG_ARM_THUMB is not set +CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set CONFIG_CPU_DCACHE_WRITETHROUGH=y @@ -248,7 +248,7 @@ CONFIG_CPU_DCACHE_WRITETHROUGH=y # CONFIG_HIGH_RES_TIMERS is not set CONFIG_PREEMPT=y CONFIG_HZ=100 -# CONFIG_AEABI is not set +CONFIG_AEABI=y # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -299,7 +299,9 @@ CONFIG_BINFMT_ELF=y # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +# CONFIG_SUSPEND is not set +CONFIG_PM_RUNTIME=y # # Networking @@ -670,7 +672,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # @@ -784,6 +786,7 @@ CONFIG_I2C_OMAP=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set +CONFIG_GPIO_SYSFS=y # # Dallas's 1-wire bus @@ -820,6 +823,7 @@ CONFIG_LEDS_AMS_DELTA=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # Multimedia devices @@ -896,7 +900,13 @@ CONFIG_LOGO_LINUX_CLUT224=y # # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_OMAP_SOC_AMS_DELTA=y # # HID Devices From 24de042ca4faa5dc1811d7b6a8b6eefd97ed7577 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Wed, 11 Nov 2009 11:00:35 -0800 Subject: [PATCH 317/743] omap3: pandora: Fix keypad keymap The original TWL4030 keypad driver from linux-omap used KEY() macro defined as (col, row), but while it was merged upstream it was changed to use matrix keypad infrastructure, which uses (row, col) format. Update the keymap in board file to match layout of mainline driver. Signed-off-by: Grazvydas Ignotas Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3pandora.c | 78 ++++++++++++------------ 1 file changed, 39 insertions(+), 39 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 5326e0d61597..7519edb69155 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -134,50 +134,50 @@ static void __init pandora_keys_gpio_init(void) } static int board_keymap[] = { - /* col, row, code */ + /* row, col, code */ KEY(0, 0, KEY_9), - KEY(0, 1, KEY_0), - KEY(0, 2, KEY_BACKSPACE), - KEY(0, 3, KEY_O), - KEY(0, 4, KEY_P), - KEY(0, 5, KEY_K), - KEY(0, 6, KEY_L), - KEY(0, 7, KEY_ENTER), - KEY(1, 0, KEY_8), + KEY(0, 1, KEY_8), + KEY(0, 2, KEY_I), + KEY(0, 3, KEY_J), + KEY(0, 4, KEY_N), + KEY(0, 5, KEY_M), + KEY(1, 0, KEY_0), KEY(1, 1, KEY_7), - KEY(1, 2, KEY_6), - KEY(1, 3, KEY_5), - KEY(1, 4, KEY_4), - KEY(1, 5, KEY_3), - KEY(1, 6, KEY_2), - KEY(1, 7, KEY_1), - KEY(2, 0, KEY_I), - KEY(2, 1, KEY_U), + KEY(1, 2, KEY_U), + KEY(1, 3, KEY_H), + KEY(1, 4, KEY_B), + KEY(1, 5, KEY_SPACE), + KEY(2, 0, KEY_BACKSPACE), + KEY(2, 1, KEY_6), KEY(2, 2, KEY_Y), - KEY(2, 3, KEY_T), - KEY(2, 4, KEY_R), - KEY(2, 5, KEY_E), - KEY(2, 6, KEY_W), - KEY(2, 7, KEY_Q), - KEY(3, 0, KEY_J), - KEY(3, 1, KEY_H), - KEY(3, 2, KEY_G), + KEY(2, 3, KEY_G), + KEY(2, 4, KEY_V), + KEY(2, 5, KEY_FN), + KEY(3, 0, KEY_O), + KEY(3, 1, KEY_5), + KEY(3, 2, KEY_T), KEY(3, 3, KEY_F), - KEY(3, 4, KEY_D), - KEY(3, 5, KEY_S), - KEY(3, 6, KEY_A), - KEY(3, 7, KEY_LEFTSHIFT), - KEY(4, 0, KEY_N), - KEY(4, 1, KEY_B), - KEY(4, 2, KEY_V), - KEY(4, 3, KEY_C), + KEY(3, 4, KEY_C), + KEY(4, 0, KEY_P), + KEY(4, 1, KEY_4), + KEY(4, 2, KEY_R), + KEY(4, 3, KEY_D), KEY(4, 4, KEY_X), - KEY(4, 5, KEY_Z), - KEY(4, 6, KEY_DOT), - KEY(4, 7, KEY_COMMA), - KEY(5, 0, KEY_M), - KEY(5, 1, KEY_SPACE), - KEY(5, 2, KEY_FN), + KEY(5, 0, KEY_K), + KEY(5, 1, KEY_3), + KEY(5, 2, KEY_E), + KEY(5, 3, KEY_S), + KEY(5, 4, KEY_Z), + KEY(6, 0, KEY_L), + KEY(6, 1, KEY_2), + KEY(6, 2, KEY_W), + KEY(6, 3, KEY_A), + KEY(6, 4, KEY_DOT), + KEY(7, 0, KEY_ENTER), + KEY(7, 1, KEY_1), + KEY(7, 2, KEY_Q), + KEY(7, 3, KEY_LEFTSHIFT), + KEY(7, 4, KEY_COMMA), }; static struct matrix_keymap_data board_map_data = { From e9840dc00468c4d2ca63b9f80038533d0f931d16 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 11 Nov 2009 11:00:36 -0800 Subject: [PATCH 318/743] omap3: beagle: Fix USB host port power control The host port power is enabled by driving the nEN_USB_PWR low as stated in the comment. This fix is originally from Steve Sakoman . Signed-off-by: Jarkko Nikula Cc: Steve Sakoman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3beagle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 70df6b4dbcd4..08b0816afa61 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -162,7 +162,7 @@ static int beagle_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; From b30dcf5f37023d591caee80c233bf33706bc5a21 Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Wed, 11 Nov 2009 11:00:37 -0800 Subject: [PATCH 319/743] omap3: 3430sdp: Enable Linux Regulator framework Some drivers have dependencies on this, and therefore should be enabled. Signed-off-by: Sergio Aguirre Signed-off-by: Tony Lindgren --- arch/arm/configs/omap_3430sdp_defconfig | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig index 8a4a7e2ba87b..5a305f015307 100644 --- a/arch/arm/configs/omap_3430sdp_defconfig +++ b/arch/arm/configs/omap_3430sdp_defconfig @@ -1703,7 +1703,14 @@ CONFIG_RTC_DRV_TWL4030=y # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_TWL4030=y # CONFIG_UIO is not set # CONFIG_STAGING is not set From 1ea6e6652a63f5db18d753d6a2c963d966b6d9c2 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Wed, 11 Nov 2009 11:00:38 -0800 Subject: [PATCH 320/743] omap3: update Pandora defconfig This patch updates defconfig to enable options needed to properly boot OMAP3 pandora board. It also enables MMC, OTG, GPIO LEDs, TWL4030 GPIO and sound drivers. Signed-off-by: Grazvydas Ignotas Signed-off-by: Tony Lindgren --- arch/arm/configs/omap3_pandora_defconfig | 49 +++++++++++++++++++++--- 1 file changed, 44 insertions(+), 5 deletions(-) diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig index b54ad2e2da36..150deafb0a6a 100644 --- a/arch/arm/configs/omap3_pandora_defconfig +++ b/arch/arm/configs/omap3_pandora_defconfig @@ -611,7 +611,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set +CONFIG_KEYBOARD_GPIO=y CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set @@ -634,7 +634,8 @@ CONFIG_TOUCHSCREEN_ADS7846=y # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_TWL4030_PWRBUTTON=y # # Hardware I/O ports @@ -834,7 +835,29 @@ CONFIG_DAB=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_SOUND is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DRIVERS=y +CONFIG_SND_USB=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_OMAP_SOC_MCBSP=y +CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y +CONFIG_SND_SOC_I2C_AND_SPI=y +CONFIG_SND_SOC_TWL4030=y + CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -1020,7 +1043,13 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set # CONFIG_ACCESSIBILITY is not set -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1084,9 +1113,12 @@ CONFIG_RTC_DRV_TWL4030=y # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_TWL4030=y + # # File systems # @@ -1407,3 +1439,10 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y + +# added by hand for now +CONFIG_KEYBOARD_TWL4030=y +CONFIG_USB_OTG_UTILS=y +CONFIG_TWL4030_USB=y +CONFIG_MMC_OMAP_HS=y + From 6346c93988caa3048bf4d81f9ba3608a7a195aa2 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:47 -0500 Subject: [PATCH 321/743] Btrfs: fix data allocation hint start Sometimes our start allocation hint when we cow a file can be either EXTENT_HOLE or some other such place holder, which is not optimal. So if we find that our em->block_start is one of these special values, check to see where the first block of the inode is stored, and use that as a hint. If that block is also a special value, just fallback on a hint of 0 and let the allocator figure out a good place to put the data. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 78139efe41fc..d8393ddc72a3 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -743,8 +743,22 @@ static noinline int cow_file_range(struct inode *inode, em = search_extent_mapping(&BTRFS_I(inode)->extent_tree, start, num_bytes); if (em) { - alloc_hint = em->block_start; - free_extent_map(em); + /* + * if block start isn't an actual block number then find the + * first block in this inode and use that as a hint. If that + * block is also bogus then just don't worry about it. + */ + if (em->block_start >= EXTENT_MAP_LAST_BYTE) { + free_extent_map(em); + em = search_extent_mapping(em_tree, 0, 0); + if (em && em->block_start < EXTENT_MAP_LAST_BYTE) + alloc_hint = em->block_start; + if (em) + free_extent_map(em); + } else { + alloc_hint = em->block_start; + free_extent_map(em); + } } read_unlock(&BTRFS_I(inode)->extent_tree.lock); btrfs_drop_extent_cache(inode, start, start + num_bytes - 1, 0); From 249ac1e55c642c670f47aacdc57629bbbf10a8db Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:48 -0500 Subject: [PATCH 322/743] Btrfs: cleanup transaction starting and fix journal_info usage We use journal_info to tell if we're in a nested transaction to make sure we don't commit the transaction within a nested transaction. We use another method to see if there are any outstanding ioctl trans handles, so if we're starting one do not set current->journal_info, since it will screw with other filesystems. This patch also cleans up the starting stuff so there aren't any magic numbers. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/transaction.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index bca82a4ca8e6..c207e8c32c9b 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -163,8 +163,14 @@ static void wait_current_trans(struct btrfs_root *root) } } +enum btrfs_trans_type { + TRANS_START, + TRANS_JOIN, + TRANS_USERSPACE, +}; + static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root, - int num_blocks, int wait) + int num_blocks, int type) { struct btrfs_trans_handle *h = kmem_cache_alloc(btrfs_trans_handle_cachep, GFP_NOFS); @@ -172,7 +178,8 @@ static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root, mutex_lock(&root->fs_info->trans_mutex); if (!root->fs_info->log_root_recovering && - ((wait == 1 && !root->fs_info->open_ioctl_trans) || wait == 2)) + ((type == TRANS_START && !root->fs_info->open_ioctl_trans) || + type == TRANS_USERSPACE)) wait_current_trans(root); ret = join_transaction(root); BUG_ON(ret); @@ -186,7 +193,7 @@ static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root, h->alloc_exclude_start = 0; h->delayed_ref_updates = 0; - if (!current->journal_info) + if (!current->journal_info && type != TRANS_USERSPACE) current->journal_info = h; root->fs_info->running_transaction->use_count++; @@ -198,18 +205,18 @@ static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root, struct btrfs_trans_handle *btrfs_start_transaction(struct btrfs_root *root, int num_blocks) { - return start_transaction(root, num_blocks, 1); + return start_transaction(root, num_blocks, TRANS_START); } struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root, int num_blocks) { - return start_transaction(root, num_blocks, 0); + return start_transaction(root, num_blocks, TRANS_JOIN); } struct btrfs_trans_handle *btrfs_start_ioctl_transaction(struct btrfs_root *r, int num_blocks) { - return start_transaction(r, num_blocks, 2); + return start_transaction(r, num_blocks, TRANS_USERSPACE); } /* wait for a transaction commit to be fully complete */ From 01dea1efc23b511d3b58bb94da07ddb6d6db9895 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:48 -0500 Subject: [PATCH 323/743] Btrfs: fix how we set max_size for free space clusters This patch fixes a problem where max_size can be set to 0 even though we filled the cluster properly. We set max_size to 0 if we restart the cluster window, but if the new start entry is big enough to be our new cluster then we could return with a max_size set to 0, which will mean the next time we try to allocate from this cluster it will fail. So set max_extent to the entry's size. Tested this on my box and now we actually allocate from the cluster after we fill it. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/free-space-cache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 5c2caad76212..cb2849f03251 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1296,7 +1296,7 @@ again: window_start = entry->offset; window_free = entry->bytes; last = entry; - max_extent = 0; + max_extent = entry->bytes; } else { last = next; window_free += next->bytes; From 5df6a9f606bf2ee25ab8031bff124ed883b823be Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:48 -0500 Subject: [PATCH 324/743] Btrfs: fix some metadata enospc issues We weren't reserving metadata space for rename, rmdir and unlink, which could cause problems. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 36 +++++++++++++++++++++++++++++++----- 1 file changed, 31 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index d8393ddc72a3..bb7fd8072802 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2488,7 +2488,19 @@ static int btrfs_unlink(struct inode *dir, struct dentry *dentry) root = BTRFS_I(dir)->root; + /* + * 5 items for unlink inode + * 1 for orphan + */ + ret = btrfs_reserve_metadata_space(root, 6); + if (ret) + return ret; + trans = btrfs_start_transaction(root, 1); + if (IS_ERR(trans)) { + btrfs_unreserve_metadata_space(root, 6); + return PTR_ERR(trans); + } btrfs_set_trans_block_group(trans, dir); @@ -2503,6 +2515,7 @@ static int btrfs_unlink(struct inode *dir, struct dentry *dentry) nr = trans->blocks_used; btrfs_end_transaction_throttle(trans, root); + btrfs_unreserve_metadata_space(root, 6); btrfs_btree_balance_dirty(root, nr); return ret; } @@ -2583,7 +2596,16 @@ static int btrfs_rmdir(struct inode *dir, struct dentry *dentry) inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) return -ENOTEMPTY; + ret = btrfs_reserve_metadata_space(root, 5); + if (ret) + return ret; + trans = btrfs_start_transaction(root, 1); + if (IS_ERR(trans)) { + btrfs_unreserve_metadata_space(root, 5); + return PTR_ERR(trans); + } + btrfs_set_trans_block_group(trans, dir); if (unlikely(inode->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)) { @@ -2606,6 +2628,7 @@ static int btrfs_rmdir(struct inode *dir, struct dentry *dentry) out: nr = trans->blocks_used; ret = btrfs_end_transaction_throttle(trans, root); + btrfs_unreserve_metadata_space(root, 5); btrfs_btree_balance_dirty(root, nr); if (ret && !err) @@ -5297,11 +5320,14 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, return -ENOTEMPTY; /* - * 2 items for dir items - * 1 item for orphan entry - * 1 item for ref + * We want to reserve the absolute worst case amount of items. So if + * both inodes are subvols and we need to unlink them then that would + * require 4 item modifications, but if they are both normal inodes it + * would require 5 item modifications, so we'll assume their normal + * inodes. So 5 * 2 is 10, plus 1 for the new link, so 11 total items + * should cover the worst case number of items we'll modify. */ - ret = btrfs_reserve_metadata_space(root, 4); + ret = btrfs_reserve_metadata_space(root, 11); if (ret) return ret; @@ -5417,7 +5443,7 @@ out_fail: if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) up_read(&root->fs_info->subvol_sem); - btrfs_unreserve_metadata_space(root, 4); + btrfs_unreserve_metadata_space(root, 11); return ret; } From df66916e71231e9f2377cac9c5c1e2d190f9a427 Mon Sep 17 00:00:00 2001 From: Li Dongyang Date: Fri, 6 Nov 2009 14:33:01 +0000 Subject: [PATCH 325/743] Btrfs: skip btrfs_release_path in btrfs_update_root and btrfs_del_root We don't need to call btrfs_release_path because btrfs_free_path will do that for us. Signed-off-by: Li Dongyang Signed-off-by: Chris Mason --- fs/btrfs/root-tree.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c index 9351428f30e2..67fa2d29d663 100644 --- a/fs/btrfs/root-tree.c +++ b/fs/btrfs/root-tree.c @@ -159,7 +159,6 @@ int btrfs_update_root(struct btrfs_trans_handle *trans, struct btrfs_root write_extent_buffer(l, item, ptr, sizeof(*item)); btrfs_mark_buffer_dirty(path->nodes[0]); out: - btrfs_release_path(root, path); btrfs_free_path(path); return ret; } @@ -332,7 +331,6 @@ int btrfs_del_root(struct btrfs_trans_handle *trans, struct btrfs_root *root, BUG_ON(refs != 0); ret = btrfs_del_item(trans, root, path); out: - btrfs_release_path(root, path); btrfs_free_path(path); return ret; } From 4eb3991c5def39bcf553c14ebe2618fcb47b627f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 10 Nov 2009 09:01:43 +0000 Subject: [PATCH 326/743] Btrfs: avoid null deref in unpin_extent_cache() I re-orderred the checks to avoid dereferencing "em" if it was null. Found by smatch static checker. Signed-off-by: Dan Carpenter Signed-off-by: Chris Mason --- fs/btrfs/extent_map.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c index 2c726b7b9faa..ccbdcb54ec5d 100644 --- a/fs/btrfs/extent_map.c +++ b/fs/btrfs/extent_map.c @@ -208,7 +208,7 @@ int unpin_extent_cache(struct extent_map_tree *tree, u64 start, u64 len) write_lock(&tree->lock); em = lookup_extent_mapping(tree, start, len); - WARN_ON(em->start != start || !em); + WARN_ON(!em || em->start != start); if (!em) goto out; From ccf0e72537a9f68611ca575121afd08e2b4d0fb0 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:48 -0500 Subject: [PATCH 327/743] Btrfs: find ideal block group for caching This patch changes a few things. Hopefully the comments are helpfull, but I'll try and be as verbose here. Problem: My fedora box was taking 1 minute and 21 seconds to boot with btrfs as root. Part of this problem was we pick the first block group we can find and start caching it, even if it may not have enough free space. The other problem is we only search for cached block groups the first time around, which we won't find any cached block groups because this is a newly mounted fs, so we end up caching several block groups during bootup, which with alot of fragmentation takes around 30-45 seconds to complete, which bogs down the system. So Solution: 1) Don't cache block groups willy-nilly at first. Instead try and figure out which block group has the most free, and therefore will take the least amount of time to cache. 2) Don't be so picky about cached block groups. The other problem is once we've filled up a cluster, if the block group isn't finished caching the next time we try and do the allocation we'll completely ignore the cluster and start searching from the beginning of the space, which makes us cache more block groups, which slows us down even more. So instead of skipping block groups that are not finished caching when we have a hint, only skip the block group if it hasn't started caching yet. There is one other tweak in here. Before if we allocated a chunk and still couldn't find new space, we'd end up switching the space info to force another chunk allocation. This could make us end up with way too many chunks, so keep track of this particular case. With this patch and my previous cluster fixes my fedora box now boots in 43 seconds, and according to the bootchart is not held up by our block group caching at all. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 109 ++++++++++++++++++++++++++++++++--------- 1 file changed, 86 insertions(+), 23 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index c56f91639dc1..2a4cdceeb575 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4101,7 +4101,7 @@ wait_block_group_cache_done(struct btrfs_block_group_cache *cache) } enum btrfs_loop_type { - LOOP_CACHED_ONLY = 0, + LOOP_FIND_IDEAL = 0, LOOP_CACHING_NOWAIT = 1, LOOP_CACHING_WAIT = 2, LOOP_ALLOC_CHUNK = 3, @@ -4130,12 +4130,15 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, struct btrfs_block_group_cache *block_group = NULL; int empty_cluster = 2 * 1024 * 1024; int allowed_chunk_alloc = 0; + int done_chunk_alloc = 0; struct btrfs_space_info *space_info; int last_ptr_loop = 0; int loop = 0; bool found_uncached_bg = false; bool failed_cluster_refill = false; bool failed_alloc = false; + u64 ideal_cache_percent = 0; + u64 ideal_cache_offset = 0; WARN_ON(num_bytes < root->sectorsize); btrfs_set_key_type(ins, BTRFS_EXTENT_ITEM_KEY); @@ -4171,14 +4174,19 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, empty_cluster = 0; if (search_start == hint_byte) { +ideal_cache: block_group = btrfs_lookup_block_group(root->fs_info, search_start); /* * we don't want to use the block group if it doesn't match our * allocation bits, or if its not cached. + * + * However if we are re-searching with an ideal block group + * picked out then we don't care that the block group is cached. */ if (block_group && block_group_bits(block_group, data) && - block_group_cache_done(block_group)) { + (block_group->cached != BTRFS_CACHE_NO || + search_start == ideal_cache_offset)) { down_read(&space_info->groups_sem); if (list_empty(&block_group->list) || block_group->ro) { @@ -4190,13 +4198,13 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, */ btrfs_put_block_group(block_group); up_read(&space_info->groups_sem); - } else + } else { goto have_block_group; + } } else if (block_group) { btrfs_put_block_group(block_group); } } - search: down_read(&space_info->groups_sem); list_for_each_entry(block_group, &space_info->block_groups, list) { @@ -4208,28 +4216,45 @@ search: have_block_group: if (unlikely(block_group->cached == BTRFS_CACHE_NO)) { + u64 free_percent; + + free_percent = btrfs_block_group_used(&block_group->item); + free_percent *= 100; + free_percent = div64_u64(free_percent, + block_group->key.offset); + free_percent = 100 - free_percent; + if (free_percent > ideal_cache_percent && + likely(!block_group->ro)) { + ideal_cache_offset = block_group->key.objectid; + ideal_cache_percent = free_percent; + } + /* - * we want to start caching kthreads, but not too many - * right off the bat so we don't overwhelm the system, - * so only start them if there are less than 2 and we're - * in the initial allocation phase. + * We only want to start kthread caching if we are at + * the point where we will wait for caching to make + * progress, or if our ideal search is over and we've + * found somebody to start caching. */ if (loop > LOOP_CACHING_NOWAIT || - atomic_read(&space_info->caching_threads) < 2) { + (loop > LOOP_FIND_IDEAL && + atomic_read(&space_info->caching_threads) < 2)) { ret = cache_block_group(block_group); BUG_ON(ret); } + found_uncached_bg = true; + + /* + * If loop is set for cached only, try the next block + * group. + */ + if (loop == LOOP_FIND_IDEAL) + goto loop; } cached = block_group_cache_done(block_group); - if (unlikely(!cached)) { + if (unlikely(!cached)) found_uncached_bg = true; - /* if we only want cached bgs, loop */ - if (loop == LOOP_CACHED_ONLY) - goto loop; - } - if (unlikely(block_group->ro)) goto loop; @@ -4409,9 +4434,11 @@ loop: } up_read(&space_info->groups_sem); - /* LOOP_CACHED_ONLY, only search fully cached block groups - * LOOP_CACHING_NOWAIT, search partially cached block groups, but - * dont wait foR them to finish caching + /* LOOP_FIND_IDEAL, only search caching/cached bg's, and don't wait for + * for them to make caching progress. Also + * determine the best possible bg to cache + * LOOP_CACHING_NOWAIT, search partially cached block groups, kicking + * caching kthreads as we move along * LOOP_CACHING_WAIT, search everything, and wait if our bg is caching * LOOP_ALLOC_CHUNK, force a chunk allocation and try again * LOOP_NO_EMPTY_SIZE, set empty_size and empty_cluster to 0 and try @@ -4420,12 +4447,47 @@ loop: if (!ins->objectid && loop < LOOP_NO_EMPTY_SIZE && (found_uncached_bg || empty_size || empty_cluster || allowed_chunk_alloc)) { - if (found_uncached_bg) { + if (loop == LOOP_FIND_IDEAL && found_uncached_bg) { found_uncached_bg = false; - if (loop < LOOP_CACHING_WAIT) { - loop++; + loop++; + if (!ideal_cache_percent && + atomic_read(&space_info->caching_threads)) goto search; - } + + /* + * 1 of the following 2 things have happened so far + * + * 1) We found an ideal block group for caching that + * is mostly full and will cache quickly, so we might + * as well wait for it. + * + * 2) We searched for cached only and we didn't find + * anything, and we didn't start any caching kthreads + * either, so chances are we will loop through and + * start a couple caching kthreads, and then come back + * around and just wait for them. This will be slower + * because we will have 2 caching kthreads reading at + * the same time when we could have just started one + * and waited for it to get far enough to give us an + * allocation, so go ahead and go to the wait caching + * loop. + */ + loop = LOOP_CACHING_WAIT; + search_start = ideal_cache_offset; + ideal_cache_percent = 0; + goto ideal_cache; + } else if (loop == LOOP_FIND_IDEAL) { + /* + * Didn't find a uncached bg, wait on anything we find + * next. + */ + loop = LOOP_CACHING_WAIT; + goto search; + } + + if (loop < LOOP_CACHING_WAIT) { + loop++; + goto search; } if (loop == LOOP_ALLOC_CHUNK) { @@ -4437,7 +4499,8 @@ loop: ret = do_chunk_alloc(trans, root, num_bytes + 2 * 1024 * 1024, data, 1); allowed_chunk_alloc = 0; - } else { + done_chunk_alloc = 1; + } else if (!done_chunk_alloc) { space_info->force_alloc = 1; } From f5a84ee3cdd88d96b7bcede10af58598ad8d52a7 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:48 -0500 Subject: [PATCH 328/743] Btrfs: fallback on uncompressed io if compressed io fails Currently compressed IO does not deal with not having its entire extent able to be allocated. So if we have enough free space to allocate for the extent, but its not contiguous, it will fail spectacularly. This patch fixes this by falling back on uncompressed IO which lets us spread the delalloc extent across multiple extents. I tested this by making us randomly think the reservation had failed to make it fallback on the uncompressed io way and it seemed to work fine. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index bb7fd8072802..d3d7d46a6af2 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -538,7 +538,7 @@ static noinline int submit_compressed_extents(struct inode *inode, struct btrfs_root *root = BTRFS_I(inode)->root; struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree; struct extent_io_tree *io_tree; - int ret; + int ret = 0; if (list_empty(&async_cow->extents)) return 0; @@ -552,6 +552,7 @@ static noinline int submit_compressed_extents(struct inode *inode, io_tree = &BTRFS_I(inode)->io_tree; +retry: /* did the compression code fall back to uncompressed IO? */ if (!async_extent->pages) { int page_started = 0; @@ -562,11 +563,11 @@ static noinline int submit_compressed_extents(struct inode *inode, async_extent->ram_size - 1, GFP_NOFS); /* allocate blocks */ - cow_file_range(inode, async_cow->locked_page, - async_extent->start, - async_extent->start + - async_extent->ram_size - 1, - &page_started, &nr_written, 0); + ret = cow_file_range(inode, async_cow->locked_page, + async_extent->start, + async_extent->start + + async_extent->ram_size - 1, + &page_started, &nr_written, 0); /* * if page_started, cow_file_range inserted an @@ -574,7 +575,7 @@ static noinline int submit_compressed_extents(struct inode *inode, * and IO for us. Otherwise, we need to submit * all those pages down to the drive. */ - if (!page_started) + if (!page_started && !ret) extent_write_locked_range(io_tree, inode, async_extent->start, async_extent->start + @@ -602,7 +603,21 @@ static noinline int submit_compressed_extents(struct inode *inode, async_extent->compressed_size, 0, alloc_hint, (u64)-1, &ins, 1); - BUG_ON(ret); + if (ret) { + int i; + for (i = 0; i < async_extent->nr_pages; i++) { + WARN_ON(async_extent->pages[i]->mapping); + page_cache_release(async_extent->pages[i]); + } + kfree(async_extent->pages); + async_extent->nr_pages = 0; + async_extent->pages = NULL; + unlock_extent(io_tree, async_extent->start, + async_extent->start + + async_extent->ram_size - 1, GFP_NOFS); + goto retry; + } + em = alloc_extent_map(GFP_NOFS); em->start = async_extent->start; em->len = async_extent->ram_size; From 33b258086441dd07e00133c79fcd8cbc6a76d737 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Wed, 11 Nov 2009 10:16:57 -0500 Subject: [PATCH 329/743] Btrfs: allow more metadata chunk preallocation On an FS where all of the space has not been allocated into chunks yet, the enospc can return enospc just because the existing metadata chunks are full. We get around this by allowing more metadata chunks to be allocated up to a certain limit, and finding the right limit is a little fuzzy. The problem is the reservations for delalloc would preallocate way too much of the FS as metadata. We need to start saying no and just force some IO to happen. But we also need to let a reasonable amount of the FS become metadata. This bumps the hard limit up, later releases will have a better system. Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 2a4cdceeb575..8d1fd6dc22ac 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2976,10 +2976,10 @@ static int maybe_allocate_chunk(struct btrfs_root *root, free_space = btrfs_super_total_bytes(disk_super); /* - * we allow the metadata to grow to a max of either 5gb or 5% of the + * we allow the metadata to grow to a max of either 10gb or 5% of the * space in the volume. */ - min_metadata = min((u64)5 * 1024 * 1024 * 1024, + min_metadata = min((u64)10 * 1024 * 1024 * 1024, div64_u64(free_space * 5, 100)); if (info->total_bytes >= min_metadata) { spin_unlock(&info->lock); From a6dbd429d8dd3382bbd9594b8d2ec74843a260d9 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 11 Nov 2009 15:53:34 -0500 Subject: [PATCH 330/743] Btrfs: fix panic when trying to destroy a newly allocated There is a problem where iget5_locked will look for an inode, not find it, and then subsequently try to allocate it. Another CPU will have raced in and allocated the inode instead, so when iget5_locked gets the inode spin lock again and does a search, it finds the new inode. So it goes ahead and calls destroy_inode on the inode it just allocated. The problem is we don't set BTRFS_I(inode)->root until the new inode is completely initialized. This patch makes us set root to NULL when alloc'ing a new inode, so when we get to btrfs_destroy_inode and we see that root is NULL we can just free up the memory and continue on. This fixes the panic http://www.kerneloops.org/submitresult.php?number=812690 Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index d3d7d46a6af2..ee92801fc5db 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5180,6 +5180,7 @@ struct inode *btrfs_alloc_inode(struct super_block *sb) ei->logged_trans = 0; ei->outstanding_extents = 0; ei->reserved_extents = 0; + ei->root = NULL; spin_lock_init(&ei->accounting_lock); btrfs_ordered_inode_tree_init(&ei->ordered_tree); INIT_LIST_HEAD(&ei->i_orphan); @@ -5195,6 +5196,14 @@ void btrfs_destroy_inode(struct inode *inode) WARN_ON(!list_empty(&inode->i_dentry)); WARN_ON(inode->i_data.nrpages); + /* + * This can happen where we create an inode, but somebody else also + * created the same inode and we need to destroy the one we already + * created. + */ + if (!root) + goto free; + /* * Make sure we're properly removed from the ordered operation * lists. @@ -5230,6 +5239,7 @@ void btrfs_destroy_inode(struct inode *inode) } inode_tree_del(inode); btrfs_drop_extent_cache(inode, 0, (u64)-1, 0); +free: kmem_cache_free(btrfs_inode_cachep, BTRFS_I(inode)); } From 404291ac9e72d118fcadeb939a69b2caa0a0e9ca Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 11 Nov 2009 13:32:29 -0800 Subject: [PATCH 331/743] btusb bluetooth driver: wait for 'waker' work too before closing Rafael debugged a resume-time hang (with oopses in workqueue handling) on his laptop that was due to the 'waker' workqueue entry being disconnected and then released without the workqueue entry having been synchronized. Several people were involved, with Oleg Nesterov doing a debugging patch showing what workqueue entry was corrupt etc. This was a regression introduced by commit 7bee549e19 ("Bluetooth: Add USB autosuspend support to btusb driver") as Rafael points out (not actually bisected, but it became clear once the bug was found). Tested-and-reported-by: Rafael J. Wysocki Acked-by: Oliver Neukum Cc: Oleg Nesterov Cc: Tejun Heo Cc: Marcel Holtmann Signed-off-by: Linus Torvalds --- drivers/bluetooth/btusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 7ba91aa3fe8b..2fb38027f3bb 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -591,6 +591,7 @@ static int btusb_close(struct hci_dev *hdev) return 0; cancel_work_sync(&data->work); + cancel_work_sync(&data->waker); clear_bit(BTUSB_ISOC_RUNNING, &data->flags); clear_bit(BTUSB_BULK_RUNNING, &data->flags); From b029839cf1f3aa095de73aa2acc241f1c65201ab Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Wed, 11 Nov 2009 11:00:38 -0800 Subject: [PATCH 332/743] omap3: Decrease cpufreq transition latency Adjust OMAP3 frequency transition latency from 10,000,000uS to a more reasonable 300,000uS. This causes ondemand and conservative governors to sample CPU load more often resulting in more responsive behavior. Tested on Android 2.6.29; using this value and conservative governor, CORE power consumption on Zoom2 was comparable to the old and unresponsive 10,000,000uS value while UI responsiveness was greatly improved. Signed-off-by: Mike Turquette Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/cpu-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index 1868c0d8f9b5..341235c278ac 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -127,7 +127,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy) } /* FIXME: what's the actual transition time? */ - policy->cpuinfo.transition_latency = 10 * 1000 * 1000; + policy->cpuinfo.transition_latency = 300 * 1000; return 0; } From 5e8651060cea6b44844521ddcac665e2c021f5d8 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 12 Nov 2009 12:08:04 +1100 Subject: [PATCH 333/743] md: factor out updating of 'recovery_offset'. Each device has its own 'recovery_offset' showing how far recovery has progressed on the device. As the only real significance of this is that fact that it can be stored in the metadata and recovered at restart, and as only 1.x metadata can do this, we were only updating 'recovery_offset' to 'curr_resync_completed' when updating v1.x metadata. But this is wrong, and we will shortly make limited use of this field in v0.90 metadata. So move the update into common code. Signed-off-by: NeilBrown --- drivers/md/md.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index e64c971038d1..01b9a0fd16e0 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1382,8 +1382,6 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev) if (rdev->raid_disk >= 0 && !test_bit(In_sync, &rdev->flags)) { - if (mddev->curr_resync_completed > rdev->recovery_offset) - rdev->recovery_offset = mddev->curr_resync_completed; if (rdev->recovery_offset > 0) { sb->feature_map |= cpu_to_le32(MD_FEATURE_RECOVERY_OFFSET); @@ -1917,6 +1915,14 @@ static void sync_sbs(mddev_t * mddev, int nospares) */ mdk_rdev_t *rdev; + /* First make sure individual recovery_offsets are correct */ + list_for_each_entry(rdev, &mddev->disks, same_set) { + if (rdev->raid_disk >= 0 && + !test_bit(In_sync, &rdev->flags) && + mddev->curr_resync_completed > rdev->recovery_offset) + rdev->recovery_offset = mddev->curr_resync_completed; + + } list_for_each_entry(rdev, &mddev->disks, same_set) { if (rdev->sb_events == mddev->events || (nospares && From e8bb910d1bbc65e7081e73aab4b3a3dd8630332c Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 4 Nov 2009 15:59:34 -0700 Subject: [PATCH 334/743] intel-iommu: Obey coherent_dma_mask for alloc_coherent on passthrough The model for IOMMU passthrough is that decent devices that can cope with DMA to all of memory get passthrough; crappy devices with a limited dma_mask don't -- they get to use the IOMMU anyway. This is done on the basis that IOMMU passthrough is usually wanted for performance reasons, and it's only the decent PCI devices that you really care about performance for, while the crappy 32-bit ones like your USB controller can just use the IOMMU and you won't really care. Unfortunately, the check for this was only looking at dev->dma_mask, not at dev->coherent_dma_mask. And some devices have a 32-bit coherent_dma_mask even though they have a full 64-bit dma_mask. Even more unfortunately, fixing that simple oversight would upset certain broken HP devices. Not only do they have a 32-bit coherent_dma_mask, but they also have a tendency to do stray DMA to unmapped addresses. And then they die when they take the DMA fault they so richly deserve. So if we do the 'correct' fix, it'll mean that affected users have to disable IOMMU support completely on "a large percentage of servers from a major vendor." Personally, I have little sympathy -- given that this is the _same_ 'major vendor' who is shipping machines which claim to have IOMMU support but have obviously never _once_ booted a VT-d capable OS to do any form of QA. But strictly speaking, it _would_ be a regression even though it only ever worked by fluke. For 2.6.33, we'll come up with a quirk which gives swiotlb support for this particular device, and other devices with an inadequate coherent_dma_mask will just get normal IOMMU mapping. The simplest fix for 2.6.32, though, is just to jump through some hoops to try to allocate coherent DMA memory for such devices in a place that they can reach. We'd use dma_generic_alloc_coherent() for this if it existed on IA64. Signed-off-by: Alex Williamson Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index b1e97e682500..7fe5f7920caf 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -2767,7 +2767,15 @@ static void *intel_alloc_coherent(struct device *hwdev, size_t size, size = PAGE_ALIGN(size); order = get_order(size); - flags &= ~(GFP_DMA | GFP_DMA32); + + if (!iommu_no_mapping(hwdev)) + flags &= ~(GFP_DMA | GFP_DMA32); + else if (hwdev->coherent_dma_mask < dma_get_required_mask(hwdev)) { + if (hwdev->coherent_dma_mask < DMA_BIT_MASK(32)) + flags |= GFP_DMA; + else + flags |= GFP_DMA32; + } vaddr = (void *)__get_free_pages(flags, order); if (!vaddr) From 99dcadede42f8898d4c963ef69192ef4b9b76ba8 Mon Sep 17 00:00:00 2001 From: Fenghua Yu Date: Wed, 11 Nov 2009 07:23:06 -0800 Subject: [PATCH 335/743] intel-iommu: Support PCIe hot-plug To support PCIe hot plug in IOMMU, we register a notifier to respond to device change action. When the notifier gets BUS_NOTIFY_UNBOUND_DRIVER, it removes the device from its DMAR domain. A hot added device will be added into an IOMMU domain when it first does IOMMU op. So there is no need to add more code for hot add. Without the patch, after a hot-remove, a hot-added device on the same slot will not work. Signed-off-by: Fenghua Yu Tested-by: Yinghai Lu Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 7fe5f7920caf..1840a0578a42 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -3215,6 +3215,33 @@ static int __init init_iommu_sysfs(void) } #endif /* CONFIG_PM */ +/* + * Here we only respond to action of unbound device from driver. + * + * Added device is not attached to its DMAR domain here yet. That will happen + * when mapping the device to iova. + */ +static int device_notifier(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct pci_dev *pdev = to_pci_dev(dev); + struct dmar_domain *domain; + + domain = find_domain(pdev); + if (!domain) + return 0; + + if (action == BUS_NOTIFY_UNBOUND_DRIVER && !iommu_pass_through) + domain_remove_one_dev_info(domain, pdev); + + return 0; +} + +static struct notifier_block device_nb = { + .notifier_call = device_notifier, +}; + int __init intel_iommu_init(void) { int ret = 0; @@ -3267,6 +3294,8 @@ int __init intel_iommu_init(void) register_iommu(&intel_iommu_ops); + bus_register_notifier(&pci_bus_type, &device_nb); + return 0; } From 46ef6ec9da420b298b1f197e445bf5b06fe01ef4 Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Wed, 11 Nov 2009 14:32:10 -0500 Subject: [PATCH 336/743] ALSA: hda: Use model=mb5 for MacBookPro 5,2 BugLink: https://bugs.launchpad.net/bugs/462098 Until we can look closer at the verbs, let's use ALC885_MB5 for codec SSID 0x106b4600 to enable playback and capture for MacBookPro 5,2s. Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index daf6975b0c2e..84a52efdb2d6 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8911,10 +8911,11 @@ static struct snd_pci_quirk alc882_ssid_cfg_tbl[] = { SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3), SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_IMAC24), SND_PCI_QUIRK(0x106b, 0x3f00, "Macbook 5,1", ALC885_MB5), - /* FIXME: HP jack sense seems not working for MBP 5,1, so apparently - * no perfect solution yet + /* FIXME: HP jack sense seems not working for MBP 5,1 or 5,2, + * so apparently no perfect solution yet */ SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC885_MB5), + SND_PCI_QUIRK(0x106b, 0x4600, "MacbookPro 5,2", ALC885_MB5), {} /* terminator */ }; From ff5e4b51a397568c6a2901903c35a4bfaaf752a4 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Thu, 12 Nov 2009 09:53:50 +0100 Subject: [PATCH 337/743] fs/jbd: Export log_start_commit to fix ext3 build. This fixes: ERROR: "log_start_commit" [fs/ext3/ext3.ko] undefined! Signed-off-by: Stefan Schmidt --- fs/jbd/journal.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index 49d5cd6053c8..4160afad6d00 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -73,6 +73,7 @@ EXPORT_SYMBOL(journal_errno); EXPORT_SYMBOL(journal_ack_err); EXPORT_SYMBOL(journal_clear_err); EXPORT_SYMBOL(log_wait_commit); +EXPORT_SYMBOL(log_start_commit); EXPORT_SYMBOL(journal_start_commit); EXPORT_SYMBOL(journal_force_commit_nested); EXPORT_SYMBOL(journal_wipe); From c62b17a58ab5e97534ff6487241addd5fcc606de Mon Sep 17 00:00:00 2001 From: Romit Dasgupta Date: Thu, 12 Nov 2009 13:08:11 +0100 Subject: [PATCH 338/743] Thaw refrigerated bdi flusher threads before invoking kthread_stop on them Unfreezes the bdi flusher task when the said task needs to exit. Steps to reproduce this. 1) Mount a file system from MMC/SD card. 2) Unmount the file system. This creates a flusher task. 3) Attempt suspend to RAM. System is unresponsive. This is because the bdi flusher thread is already in the refrigerator and will remain so until it is thawed. The MMC driver suspend routine call stack will ultimately issue a 'kthread_stop' on the bdi flusher thread and will block until the flusher thread is exited. Since the bdi flusher thread is in the refrigerator it never cleans up until thawed. Signed-off-by: Romit Dasgupta Signed-off-by: Jens Axboe --- mm/backing-dev.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/mm/backing-dev.c b/mm/backing-dev.c index 11aee09dd2a6..67a33a5a1a93 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -604,10 +604,14 @@ static void bdi_wb_shutdown(struct backing_dev_info *bdi) /* * Finally, kill the kernel threads. We don't need to be RCU - * safe anymore, since the bdi is gone from visibility. + * safe anymore, since the bdi is gone from visibility. Force + * unfreeze of the thread before calling kthread_stop(), otherwise + * it would never exet if it is currently stuck in the refrigerator. */ - list_for_each_entry(wb, &bdi->wb_list, list) + list_for_each_entry(wb, &bdi->wb_list, list) { + wb->task->flags &= ~PF_FROZEN; kthread_stop(wb->task); + } } /* From 52e650407d709fd02091f0d735434def96a545bc Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 11 Nov 2009 14:26:09 -0800 Subject: [PATCH 339/743] MAINTAINERS: ASUS ACPI EXTRAS - remove F:arch/x86/kernel/acpi/boot.c Oops. How did that get there? (Don't look, it's my original pattern commit...) Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 8264e6bddaa1..ba8ded198b2b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -906,7 +906,6 @@ M: Karol Kozimor L: acpi4asus-user@lists.sourceforge.net W: http://acpi4asus.sf.net S: Maintained -F: arch/x86/kernel/acpi/boot.c F: drivers/platform/x86/asus_acpi.c ASUS ASB100 HARDWARE MONITOR DRIVER From 455518e7b5ff53478821fe9185531e0a2135d076 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 11 Nov 2009 14:26:10 -0800 Subject: [PATCH 340/743] MAINTAINERS: BROCADE BFA - Use single line M: and tabs Integrate P:/M: to single M: Use tab for spacing Signed-off-by: Joe Perches Cc: Jing Huang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index ba8ded198b2b..b6bcc2f14083 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1244,11 +1244,10 @@ S: Supported F: drivers/net/tg3.* BROCADE BFA FC SCSI DRIVER -P: Jing Huang -M: huangj@brocade.com -L: linux-scsi@vger.kernel.org -S: Supported -F: drivers/scsi/bfa/ +M: Jing Huang +L: linux-scsi@vger.kernel.org +S: Supported +F: drivers/scsi/bfa/ BSG (block layer generic sg v4 driver) M: FUJITA Tomonori From 3387f656309dd427023c7e00cad901a89d40bc1c Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 11 Nov 2009 14:26:11 -0800 Subject: [PATCH 341/743] MAINTAINERS: SERVER ENGINES 10Gbps iSCSI - Use single line M: Integrate P:/M: lines to single M: Use tabs not spaces Signed-off-by: Joe Perches Cc: Jayamohan Kallickal Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index b6bcc2f14083..e5d11054e78b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4671,12 +4671,11 @@ F: include/linux/ata.h F: include/linux/libata.h SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER -P: Jayamohan Kallickal -M: jayamohank@serverengines.com -L: linux-scsi@vger.kernel.org -W: http://www.serverengines.com -S: Supported -F: drivers/scsi/be2iscsi/ +M: Jayamohan Kallickal +L: linux-scsi@vger.kernel.org +W: http://www.serverengines.com +S: Supported +F: drivers/scsi/be2iscsi/ SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER M: Sathya Perla From 65c8bb5b9f25d869b814ca4238935a2e609f81cf Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 11 Nov 2009 14:26:12 -0800 Subject: [PATCH 342/743] MAINTAINERS: VMWARE VMXNET3 - Quote name with comma and period, use tabs Names with periods or commas need to be quoted Use tab not spaces Signed-off-by: Joe Perches Cc: Shreyas Bhatewara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index e5d11054e78b..5577259911d7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5681,11 +5681,11 @@ F: drivers/vlynq/vlynq.c F: include/linux/vlynq.h VMWARE VMXNET3 ETHERNET DRIVER -M: Shreyas Bhatewara -M: VMware, Inc. -L: netdev@vger.kernel.org -S: Maintained -F: drivers/net/vmxnet3/ +M: Shreyas Bhatewara +M: "VMware, Inc." +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/vmxnet3/ VOLTAGE AND CURRENT REGULATOR FRAMEWORK M: Liam Girdwood From 3bd7bf5f1aabf5d5e6b8ee60360dc52259a83118 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 11 Nov 2009 14:26:13 -0800 Subject: [PATCH 343/743] get_maintainer: fix usage comment With the `s' it just won't work. Signed-off-by: Roel Kluin Acked-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 102b76608f35..81a67a458e78 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -5,8 +5,8 @@ # Print selected MAINTAINERS information for # the files modified in a patch or for a file # -# usage: perl scripts/get_maintainers.pl [OPTIONS] -# perl scripts/get_maintainers.pl [OPTIONS] -f +# usage: perl scripts/get_maintainer.pl [OPTIONS] +# perl scripts/get_maintainer.pl [OPTIONS] -f # # Licensed under the terms of the GNU GPL License version 2 From b0c9065324b7c1242b97b27a1407da18471b9b23 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 11 Nov 2009 14:26:13 -0800 Subject: [PATCH 344/743] MAINTAINERS: openipmi list is moderated openipmi list is moderated. Signed-off-by: Randy Dunlap Acked-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 5577259911d7..bdbfdcdbee0e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2823,7 +2823,7 @@ F: drivers/infiniband/hw/ipath/ IPMI SUBSYSTEM M: Corey Minyard -L: openipmi-developer@lists.sourceforge.net +L: openipmi-developer@lists.sourceforge.net (moderated for non-subscribers) W: http://openipmi.sourceforge.net/ S: Supported F: Documentation/IPMI.txt From cc4a6851466039a8a688c843962a05689059ff3b Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Wed, 11 Nov 2009 14:26:14 -0800 Subject: [PATCH 345/743] page allocator: always wake kswapd when restarting an allocation attempt after direct reclaim failed If a direct reclaim makes no forward progress, it considers whether it should go OOM or not. Whether OOM is triggered or not, it may retry the allocation afterwards. In times past, this would always wake kswapd as well but currently, kswapd is not woken up after direct reclaim fails. For order-0 allocations, this makes little difference but if there is a heavy mix of higher-order allocations that direct reclaim is failing for, it might mean that kswapd is not rewoken for higher orders as much as it did previously. This patch wakes up kswapd when an allocation is being retried after a direct reclaim failure. It would be expected that kswapd is already awake, but this has the effect of telling kswapd to reclaim at the higher order as well. Signed-off-by: Mel Gorman Reviewed-by: Christoph Lameter Reviewed-by: Pekka Enberg Reviewed-by: KOSAKI Motohiro Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index cdcedf661616..250d0552a92d 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1817,9 +1817,9 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, if (NUMA_BUILD && (gfp_mask & GFP_THISNODE) == GFP_THISNODE) goto nopage; +restart: wake_all_kswapd(order, zonelist, high_zoneidx); -restart: /* * OK, we're below the kswapd watermark and have kicked background * reclaim. Now things get more complex, so set up alloc_flags according From 9d0ed60fe9cd1fbf57f755cd27a23ae9114d7210 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Wed, 11 Nov 2009 14:26:17 -0800 Subject: [PATCH 346/743] page allocator: Do not allow interrupts to use ALLOC_HARDER Commit 341ce06f69abfafa31b9468410a13dbd60e2b237 ("page allocator: calculate the alloc_flags for allocation only once") altered watermark logic slightly by allowing rt_tasks that are handling an interrupt to set ALLOC_HARDER. This patch brings the watermark logic more in line with 2.6.30. This change results in a reduction of the number high-order GFP_ATOMIC allocation failures reported. See http://www.gossamer-threads.com/lists/linux/kernel/1144153 [rientjes@google.com: Spotted the problem] Signed-off-by: Mel Gorman Reviewed-by: Pekka Enberg Reviewed-by: Rik van Riel Reviewed-by: KOSAKI Motohiro Cc: David Rientjes Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 250d0552a92d..2bc2ac63f41e 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1769,7 +1769,7 @@ gfp_to_alloc_flags(gfp_t gfp_mask) * See also cpuset_zone_allowed() comment in kernel/cpuset.c. */ alloc_flags &= ~ALLOC_CPUSET; - } else if (unlikely(rt_task(p))) + } else if (unlikely(rt_task(p)) && !in_interrupt()) alloc_flags |= ALLOC_HARDER; if (likely(!(gfp_mask & __GFP_NOMEMALLOC))) { From f5c15d0b37ab1cd3969b8ce7828ab41c79f36f77 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 11 Nov 2009 14:26:22 -0800 Subject: [PATCH 347/743] fb: remove fb_save_state() and fb_restore_state operations Remove fb_save_state() and fb_restore_state operations from frame buffer layer. They are used only in two drivers: 1. savagefb - and cause bug #11248 2. uvesafb Usage of these operations is misunderstood in both drivers so kill these operations, fix the bug #11248 and avoid confusion in the future. Tested on Savage 3D/MV card and the patch fixes the bug #11248. The frame buffer layer uses these funtions during switch between graphics and text mode of the console, but these drivers saves state before switching of the frame buffer (in the fb_open) and after releasing it (in the fb_release). This defeats the purpose of these operations. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11248 Signed-off-by: Krzysztof Helt Reported-by: Jochen Hein Tested-by: Jochen Hein Cc: Geert Uytterhoeven Cc: Michal Januszewski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/atafb.c | 6 ------ drivers/video/console/fbcon.c | 5 +---- drivers/video/savage/savagefb_driver.c | 18 ----------------- drivers/video/uvesafb.c | 28 -------------------------- include/linux/fb.h | 6 ------ 5 files changed, 1 insertion(+), 62 deletions(-) diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c index 8cd279be74e5..37624f74e88b 100644 --- a/drivers/video/atafb.c +++ b/drivers/video/atafb.c @@ -329,12 +329,6 @@ extern unsigned char fontdata_8x16[]; * * * perform fb specific mmap * * int (*fb_mmap)(struct fb_info *info, struct vm_area_struct *vma); - * - * * save current hardware state * - * void (*fb_save_state)(struct fb_info *info); - * - * * restore saved state * - * void (*fb_restore_state)(struct fb_info *info); * } ; */ diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 5a686cea23f4..3681c6a88212 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -2311,14 +2311,11 @@ static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch) ops->graphics = 1; if (!blank) { - if (info->fbops->fb_save_state) - info->fbops->fb_save_state(info); var.activate = FB_ACTIVATE_NOW | FB_ACTIVATE_FORCE; fb_set_var(info, &var); ops->graphics = 0; ops->var = info->var; - } else if (info->fbops->fb_restore_state) - info->fbops->fb_restore_state(info); + } } if (!fbcon_is_inactive(vc, info)) { diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c index 37b135d5d12e..0857b3b8c495 100644 --- a/drivers/video/savage/savagefb_driver.c +++ b/drivers/video/savage/savagefb_driver.c @@ -1606,22 +1606,6 @@ static int savagefb_blank(int blank, struct fb_info *info) return (blank == FB_BLANK_NORMAL) ? 1 : 0; } -static void savagefb_save_state(struct fb_info *info) -{ - struct savagefb_par *par = info->par; - - savage_get_default_par(par, &par->save); -} - -static void savagefb_restore_state(struct fb_info *info) -{ - struct savagefb_par *par = info->par; - - savagefb_blank(FB_BLANK_POWERDOWN, info); - savage_set_default_par(par, &par->save); - savagefb_blank(FB_BLANK_UNBLANK, info); -} - static int savagefb_open(struct fb_info *info, int user) { struct savagefb_par *par = info->par; @@ -1667,8 +1651,6 @@ static struct fb_ops savagefb_ops = { .fb_setcolreg = savagefb_setcolreg, .fb_pan_display = savagefb_pan_display, .fb_blank = savagefb_blank, - .fb_save_state = savagefb_save_state, - .fb_restore_state = savagefb_restore_state, #if defined(CONFIG_FB_SAVAGE_ACCEL) .fb_fillrect = savagefb_fillrect, .fb_copyarea = savagefb_copyarea, diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c index e35232a18571..54fbb2995a5f 100644 --- a/drivers/video/uvesafb.c +++ b/drivers/video/uvesafb.c @@ -1411,23 +1411,6 @@ static int uvesafb_check_var(struct fb_var_screeninfo *var, return 0; } -static void uvesafb_save_state(struct fb_info *info) -{ - struct uvesafb_par *par = info->par; - - if (par->vbe_state_saved) - kfree(par->vbe_state_saved); - - par->vbe_state_saved = uvesafb_vbe_state_save(par); -} - -static void uvesafb_restore_state(struct fb_info *info) -{ - struct uvesafb_par *par = info->par; - - uvesafb_vbe_state_restore(par, par->vbe_state_saved); -} - static struct fb_ops uvesafb_ops = { .owner = THIS_MODULE, .fb_open = uvesafb_open, @@ -1441,8 +1424,6 @@ static struct fb_ops uvesafb_ops = { .fb_imageblit = cfb_imageblit, .fb_check_var = uvesafb_check_var, .fb_set_par = uvesafb_set_par, - .fb_save_state = uvesafb_save_state, - .fb_restore_state = uvesafb_restore_state, }; static void __devinit uvesafb_init_info(struct fb_info *info, @@ -1459,15 +1440,6 @@ static void __devinit uvesafb_init_info(struct fb_info *info, info->fix.ypanstep = par->ypan ? 1 : 0; info->fix.ywrapstep = (par->ypan > 1) ? 1 : 0; - /* - * If we were unable to get the state buffer size, disable - * functions for saving and restoring the hardware state. - */ - if (par->vbe_state_size == 0) { - info->fbops->fb_save_state = NULL; - info->fbops->fb_restore_state = NULL; - } - /* Disable blanking if the user requested so. */ if (!blank) info->fbops->fb_blank = NULL; diff --git a/include/linux/fb.h b/include/linux/fb.h index a34bdf5a9d23..de9c722e7b90 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -669,12 +669,6 @@ struct fb_ops { /* perform fb specific mmap */ int (*fb_mmap)(struct fb_info *info, struct vm_area_struct *vma); - /* save current hardware state */ - void (*fb_save_state)(struct fb_info *info); - - /* restore saved state */ - void (*fb_restore_state)(struct fb_info *info); - /* get capability given var */ void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps, struct fb_var_screeninfo *var); From b9f9d4706cb1b706f89f98ea6ead41ebecdefbc2 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 11 Nov 2009 14:26:25 -0800 Subject: [PATCH 348/743] savagefb: fix blanking mode on CRT display Fix wrong bit mask for blanking register. Due to the error a CRT monitor blanks off due to wrong frequency (out of range) instead of PM signal (vertical and horizontal frequencies cut off). Just compare the mask with bits set in the switch(blank) clause below the changed line. Signed-off-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/savage/savagefb_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c index 0857b3b8c495..842d157e1025 100644 --- a/drivers/video/savage/savagefb_driver.c +++ b/drivers/video/savage/savagefb_driver.c @@ -1565,7 +1565,7 @@ static int savagefb_blank(int blank, struct fb_info *info) vga_out8(0x3c5, sr8, par); vga_out8(0x3c4, 0x0d, par); srd = vga_in8(0x3c5, par); - srd &= 0x03; + srd &= 0x50; switch (blank) { case FB_BLANK_UNBLANK: From e00e431612c3a6e437a01f2129fd3843da0c982a Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Wed, 11 Nov 2009 14:26:26 -0800 Subject: [PATCH 349/743] memcg: fix wrong pointer initialization at page migration when memcg is disabled. Lee Schermerhorn reported that he saw bad pointer dereference in mem_cgroup_end_migration() when he disabled memcg by boot option. memcg's page migration logic works as mem_cgroup_prepare_migration(page, &ptr); do page migration mem_cgroup_end_migration(page, ptr); Now, ptr is not initialized in prepare_migration when memcg is disabled by boot option. This causes panic in end_migration. This patch fixes it. Reported-by: Lee Schermerhorn Cc: Balbir Singh Signed-off-by: KAMEZAWA Hiroyuki Reviewed-by: Daisuke Nishimura Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/migrate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/migrate.c b/mm/migrate.c index 1a4bf4813780..7dbcb22316d2 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -602,7 +602,7 @@ static int unmap_and_move(new_page_t get_new_page, unsigned long private, struct page *newpage = get_new_page(page, private, &result); int rcu_locked = 0; int charge = 0; - struct mem_cgroup *mem; + struct mem_cgroup *mem = NULL; if (!newpage) return -ENOMEM; From 71ccb83cfc487354d2647e315c8196e5872198ab Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 11 Nov 2009 14:26:27 -0800 Subject: [PATCH 350/743] alpha: fix F_SETOWN_EX and F_GETLK64 conflict Fix a bug in commit ba0a6c9f6fceed11c6a99e8326f0477fe383e6b5 Author: Peter Zijlstra AuthorDate: Wed Sep 23 15:57:03 2009 -0700 Commit: Linus Torvalds CommitDate: Thu Sep 24 07:21:01 2009 -0700 fcntl: add F_[SG]ETOWN_EX In asm-generic/fcntl.h, F_SETOWN_EX and F_GETLK64 both have value 12, and F_GETOWN_EX and F_SETLK64 both have value 13. Reported-by: "Joseph S. Myers" Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Andreas Schwab Signed-off-by: Peter Zijlstra Acked-by: Ulrich Drepper Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/fcntl.h | 4 ++-- include/asm-generic/fcntl.h | 19 +++++++++++-------- 2 files changed, 13 insertions(+), 10 deletions(-) diff --git a/arch/alpha/include/asm/fcntl.h b/arch/alpha/include/asm/fcntl.h index e42823e954aa..73126e4dd639 100644 --- a/arch/alpha/include/asm/fcntl.h +++ b/arch/alpha/include/asm/fcntl.h @@ -26,8 +26,8 @@ #define F_GETOWN 6 /* for sockets. */ #define F_SETSIG 10 /* for sockets. */ #define F_GETSIG 11 /* for sockets. */ -#define F_SETOWN_EX 12 -#define F_GETOWN_EX 13 +#define F_SETOWN_EX 15 +#define F_GETOWN_EX 16 /* for posix fcntl() and lockf() */ #define F_RDLCK 1 diff --git a/include/asm-generic/fcntl.h b/include/asm-generic/fcntl.h index 0c3dd8603927..cd2d7896e34b 100644 --- a/include/asm-generic/fcntl.h +++ b/include/asm-generic/fcntl.h @@ -73,9 +73,18 @@ #define F_SETSIG 10 /* for sockets. */ #define F_GETSIG 11 /* for sockets. */ #endif + +#ifndef CONFIG_64BIT +#ifndef F_GETLK64 +#define F_GETLK64 12 /* using 'struct flock64' */ +#define F_SETLK64 13 +#define F_SETLKW64 14 +#endif +#endif + #ifndef F_SETOWN_EX -#define F_SETOWN_EX 12 -#define F_GETOWN_EX 13 +#define F_SETOWN_EX 15 +#define F_GETOWN_EX 16 #endif #define F_OWNER_TID 0 @@ -139,12 +148,6 @@ struct flock { #ifndef CONFIG_64BIT -#ifndef F_GETLK64 -#define F_GETLK64 12 /* using 'struct flock64' */ -#define F_SETLK64 13 -#define F_SETLKW64 14 -#endif - #ifndef HAVE_ARCH_STRUCT_FLOCK64 #ifndef __ARCH_FLOCK64_PAD #define __ARCH_FLOCK64_PAD From 15f3c476589c8778b0c10f1fb5160f9107c69556 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 11 Nov 2009 14:26:30 -0800 Subject: [PATCH 351/743] alpha: move THREAD_SIZE definition outside #ifndef ASSEMBLY arch/alpha/kernel/vmlinux.lds.S uses it: arch/alpha/kernel/vmlinux.lds:241: undefined symbol `THREAD_SIZE' referenced in expression Seems to have been caused by commit 9d93f00580243cc059510d9d6ac4d2f5e97e5b83 Author: Geoffrey Thomas AuthorDate: Thu Sep 24 10:36:26 2009 -0400 Commit: Linus Torvalds CommitDate: Thu Sep 24 17:16:22 2009 -0700 alpha: Clean up linker script using new linker script macros. Note that .data.page_aligned and .data.cacheline_aligned are now after _data; it was probably a bug that they were before it. Also, some explicit ALIGN(8)'s between various initcall sections were removed; this should be harmless as the implicit alignment of initcall_t was already 8. Cc: Geoffrey Thomas Cc: Tim Abbott Cc: Ivan Kokshaysky Cc: Sam Ravnborg Cc: Richard Henderson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/thread_info.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h index 5076a8860b18..815680b585ed 100644 --- a/arch/alpha/include/asm/thread_info.h +++ b/arch/alpha/include/asm/thread_info.h @@ -50,12 +50,12 @@ struct thread_info { register struct thread_info *__current_thread_info __asm__("$8"); #define current_thread_info() __current_thread_info +#endif /* __ASSEMBLY__ */ + /* Thread information allocation. */ #define THREAD_SIZE_ORDER 1 #define THREAD_SIZE (2*PAGE_SIZE) -#endif /* __ASSEMBLY__ */ - #define PREEMPT_ACTIVE 0x40000000 /* From 29f12ca32122db98481150be09d35bd72b68045e Mon Sep 17 00:00:00 2001 From: Sukadev Bhattiprolu Date: Wed, 11 Nov 2009 14:26:32 -0800 Subject: [PATCH 352/743] pidns: fix a leak in /proc dentries and inodes with pid namespaces. Daniel Lezcano reported a leak in 'struct pid' and 'struct pid_namespace' that is discussed in: http://lkml.org/lkml/2009/10/2/159. To summarize the thread, when container-init is terminated, it sets the PF_EXITING flag, zaps other processes in the container and waits to reap them. As a part of reaping, the container-init should flush any /proc dentries associated with the processes. But because the container-init is itself exiting and the following PF_EXITING check, the dentries are not flushed, resulting in leak in /proc inodes and dentries. This fix reverts the commit 7766755a2f249e7e0 ("Fix /proc dcache deadlock in do_exit") which introduced the check for PF_EXITING. At the time of the commit, shrink_dcache_parent() flushed dentries from other filesystems also and could have caused a deadlock which the commit fixed. But as pointed out by Eric Biederman, after commit 0feae5c47aabdde59, shrink_dcache_parent() no longer affects other filesystems. So reverting the commit is now safe. As pointed out by Jan Kara, the leak is not as critical since the unclaimed space will be reclaimed under memory pressure or by: echo 3 > /proc/sys/vm/drop_caches But since this check is no longer required, its best to remove it. Signed-off-by: Sukadev Bhattiprolu Reported-by: Daniel Lezcano Acked-by: Eric W. Biederman Acked-by: Jan Kara Cc: Andrea Arcangeli Cc: Serge Hallyn Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/base.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/proc/base.c b/fs/proc/base.c index 837469a96598..af643b5aefe8 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2597,8 +2597,7 @@ static void proc_flush_task_mnt(struct vfsmount *mnt, pid_t pid, pid_t tgid) name.len = snprintf(buf, sizeof(buf), "%d", pid); dentry = d_hash_and_lookup(mnt->mnt_root, &name); if (dentry) { - if (!(current->flags & PF_EXITING)) - shrink_dcache_parent(dentry); + shrink_dcache_parent(dentry); d_drop(dentry); dput(dentry); } From 7779d7bed950a7fb1af4f540c2f82a6b81b65901 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 11 Nov 2009 14:26:34 -0800 Subject: [PATCH 353/743] fs: add missing compat_ptr handling for FS_IOC_RESVSP ioctl For FS_IOC_RESVSP and FS_IOC_RESVSP64 compat_sys_ioctl() uses its arg argument as a pointer to userspace. However it is missing a a call to compat_ptr() which will do a proper pointer conversion. This was introduced with 3e63cbb1 "fs: Add new pre-allocation ioctls to vfs for compatibility with legacy xfs ioctls". Signed-off-by: Heiko Carstens Cc: Ankit Jain Acked-by: Christoph Hellwig Cc: Al Viro Acked-by: Arnd Bergmann Acked-by: David S. Miller Cc: [2.6.31.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/compat_ioctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index f91fd51b32e3..d84e7058c298 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -1800,7 +1800,7 @@ struct space_resv_32 { /* just account for different alignment */ static int compat_ioctl_preallocate(struct file *file, unsigned long arg) { - struct space_resv_32 __user *p32 = (void __user *)arg; + struct space_resv_32 __user *p32 = compat_ptr(arg); struct space_resv __user *p = compat_alloc_user_space(sizeof(*p)); if (copy_in_user(&p->l_type, &p32->l_type, sizeof(s16)) || @@ -2802,7 +2802,7 @@ asmlinkage long compat_sys_ioctl(unsigned int fd, unsigned int cmd, #else case FS_IOC_RESVSP: case FS_IOC_RESVSP64: - error = ioctl_preallocate(filp, (void __user *)arg); + error = ioctl_preallocate(filp, compat_ptr(arg)); goto out_fput; #endif From 431861cfab0c8613f83bac0f41dae22ff74f9bc1 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 11 Nov 2009 14:26:35 -0800 Subject: [PATCH 354/743] atmel_lcdfb: new alternate pixel clock formula at91sam9g45 non ES lots have an alternate pixel clock calculation formula. Introduce this one with condition on the cpu_is_xxxxx() macros. Newer 9g45 SOC will not have good pixel clock calculation without this fix. Signed-off-by: Nicolas Ferre Cc: Krzysztof Helt Cc: Haavard Skinnemoen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/atmel_lcdfb.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 2830ffd72976..d5e801076d33 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -484,6 +484,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info) unsigned long value; unsigned long clk_value_khz; unsigned long bits_per_line; + unsigned long pix_factor = 2; might_sleep(); @@ -516,20 +517,24 @@ static int atmel_lcdfb_set_par(struct fb_info *info) /* Now, the LCDC core... */ /* Set pixel clock */ + if (cpu_is_at91sam9g45() && !cpu_is_at91sam9g45es()) + pix_factor = 1; + clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000; value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock)); - if (value < 2) { + if (value < pix_factor) { dev_notice(info->device, "Bypassing pixel clock divider\n"); lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS); } else { - value = (value / 2) - 1; + value = (value / pix_factor) - 1; dev_dbg(info->device, " * programming CLKVAL = 0x%08lx\n", value); lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET); - info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1))); + info->var.pixclock = + KHZ2PICOS(clk_value_khz / (pix_factor * (value + 1))); dev_dbg(info->device, " updated pixclk: %lu KHz\n", PICOS2KHZ(info->var.pixclock)); } From 265f2a057bf6b567a32bb16dc8b1765cf0555d9f Mon Sep 17 00:00:00 2001 From: Rask Ingemann Lambertsen Date: Wed, 11 Nov 2009 14:26:36 -0800 Subject: [PATCH 355/743] rtc: pcf50633: fix month off-by-one error The PCF50633 stores a month value of 1-12, but the kernel wants 0-11. Signed-off-by: Rask Ingemann Lambertsen Signed-off-by: Paul Fertser Cc: Paul Gortmaker Cc: Balaji Rao Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-pcf50633.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c index f4dd87e29075..77b40ddd66e6 100644 --- a/drivers/rtc/rtc-pcf50633.c +++ b/drivers/rtc/rtc-pcf50633.c @@ -70,7 +70,7 @@ static void pcf2rtc_time(struct rtc_time *rtc, struct pcf50633_time *pcf) rtc->tm_hour = bcd2bin(pcf->time[PCF50633_TI_HOUR]); rtc->tm_wday = bcd2bin(pcf->time[PCF50633_TI_WKDAY]); rtc->tm_mday = bcd2bin(pcf->time[PCF50633_TI_DAY]); - rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]); + rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]) - 1; rtc->tm_year = bcd2bin(pcf->time[PCF50633_TI_YEAR]) + 100; } @@ -81,7 +81,7 @@ static void rtc2pcf_time(struct pcf50633_time *pcf, struct rtc_time *rtc) pcf->time[PCF50633_TI_HOUR] = bin2bcd(rtc->tm_hour); pcf->time[PCF50633_TI_WKDAY] = bin2bcd(rtc->tm_wday); pcf->time[PCF50633_TI_DAY] = bin2bcd(rtc->tm_mday); - pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon); + pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon + 1); pcf->time[PCF50633_TI_YEAR] = bin2bcd(rtc->tm_year % 100); } From 05f45d7d746d07c95588871abf933334856c1a3b Mon Sep 17 00:00:00 2001 From: Werner Almesberger Date: Wed, 11 Nov 2009 14:26:40 -0800 Subject: [PATCH 356/743] rtc: pcf50633: consider alrm->enable in pcf50633_rtc_set_alarm According to Documentation/rtc.txt, RTC_WKALM_SET sets the alarm time and enables/disables the alarm. We implement RTC_WKALM_SET through pcf50633_rtc_set_alarm. The enabling/disabling part was missing. Signed-off-by: Werner Almesberger Reported-by: Michael 'Mickey' Lauer Signed-off-by: Paul Fertser Cc: Paul Gortmaker Cc: Balaji Rao Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-pcf50633.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c index 77b40ddd66e6..33a10c47260e 100644 --- a/drivers/rtc/rtc-pcf50633.c +++ b/drivers/rtc/rtc-pcf50633.c @@ -245,8 +245,9 @@ static int pcf50633_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) ret = pcf50633_write_block(rtc->pcf, PCF50633_REG_RTCSCA, PCF50633_TI_EXTENT, &pcf_tm.time[0]); - if (!alarm_masked) + if (!alarm_masked || alrm->enabled) pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM); + rtc->alarm_enabled = alrm->enabled; return ret; } From 80647b959f97fa20a4714dde3e07b7f69d896556 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 11 Nov 2009 14:26:41 -0800 Subject: [PATCH 357/743] serial: fix printk format specifiers for struct uart_port::iobase struct uart_port::iobase is unsigned long, so use %lx as printk format specifier. Signed-off-by: Lennert Buytenhek Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250.c | 2 +- drivers/serial/8250_pci.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index b1ae774016f1..737b4c960971 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1089,7 +1089,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) if (!up->port.iobase && !up->port.mapbase && !up->port.membase) return; - DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ", + DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ", serial_index(&up->port), up->port.iobase, up->port.membase); /* diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 42e8550cd2b6..b2d65b208e55 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -2383,7 +2383,7 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) break; #ifdef SERIAL_DEBUG_PCI - printk(KERN_DEBUG "Setup PCI port: port %x, irq %d, type %d\n", + printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n", serial_port.iobase, serial_port.irq, serial_port.iotype); #endif From b87e5e2b8ed9336566100c8c796ab6dd52436881 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 11 Nov 2009 14:26:42 -0800 Subject: [PATCH 358/743] serial: add support for the Lava Quattro PCI quad-port 16550A card This seems to be a different model (with a different PCI ID) than the "Quatro" card that is also in the list. Signed-off-by: Lennert Buytenhek Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250_pci.c | 6 ++++++ include/linux/pci_ids.h | 2 ++ 2 files changed, 8 insertions(+) diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index b2d65b208e55..b28af13c45a1 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -3139,6 +3139,12 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_4_460800 }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 9ceb392cb984..84cf1f3b7838 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1956,6 +1956,8 @@ #define PCI_DEVICE_ID_LAVA_DSERIAL 0x0100 /* 2x 16550 */ #define PCI_DEVICE_ID_LAVA_QUATRO_A 0x0101 /* 2x 16550, half of 4 port */ #define PCI_DEVICE_ID_LAVA_QUATRO_B 0x0102 /* 2x 16550, half of 4 port */ +#define PCI_DEVICE_ID_LAVA_QUATTRO_A 0x0120 /* 2x 16550A, half of 4 port */ +#define PCI_DEVICE_ID_LAVA_QUATTRO_B 0x0121 /* 2x 16550A, half of 4 port */ #define PCI_DEVICE_ID_LAVA_OCTO_A 0x0180 /* 4x 16550A, half of 8 port */ #define PCI_DEVICE_ID_LAVA_OCTO_B 0x0181 /* 4x 16550A, half of 8 port */ #define PCI_DEVICE_ID_LAVA_PORT_PLUS 0x0200 /* 2x 16650 */ From 49c1d9da1c83b83e4ed65bb84326835cdb3e7327 Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Wed, 11 Nov 2009 14:26:43 -0800 Subject: [PATCH 359/743] mmci-omap: free irq resource Free IRQ on remove. Signed-off-by: Ladislav Michl Acked-by: Tony Lindgren Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/omap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index e7a331de5733..b8fd7af1ceeb 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1529,6 +1529,7 @@ static int mmc_omap_remove(struct platform_device *pdev) host->pdata->cleanup(&pdev->dev); mmc_omap_fclk_enable(host, 0); + free_irq(host->irq, host); clk_put(host->fclk); clk_disable(host->iclk); clk_put(host->iclk); From eeba444a5d5646553c094f79235b50e757aa1424 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 11 Nov 2009 14:26:44 -0800 Subject: [PATCH 360/743] MAINTAINERS: correct 9P FILE SYSTEM git entry Signed-off-by: Joe Perches Cc: Latchesar Ionkov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index bdbfdcdbee0e..c13e66f771c5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -182,7 +182,7 @@ M: Ron Minnich M: Latchesar Ionkov L: v9fs-developer@lists.sourceforge.net W: http://swik.net/v9fs -T: git git://git.kernel.org/pub/scm/linux/kernel/ericvh/v9fs.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs.git S: Maintained F: Documentation/filesystems/9p.txt F: fs/9p/ From 34693710601146d683018a14817f93791dfb2737 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 11 Nov 2009 14:26:45 -0800 Subject: [PATCH 361/743] MAINTAINERS: correct NETFILTER git entry format Signed-off-by: Joe Perches Cc: Patrick McHardy Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index c13e66f771c5..765c3c50f81a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3616,7 +3616,7 @@ L: netfilter@vger.kernel.org L: coreteam@netfilter.org W: http://www.netfilter.org/ W: http://www.iptables.org/ -T: git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git S: Supported F: include/linux/netfilter* F: include/linux/netfilter/ From df69f0da187815bc116860be4a29c7c953d22c5a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 11 Nov 2009 14:26:46 -0800 Subject: [PATCH 362/743] MAINTAINERS: correct SECURITY SUBSYSTEM git entry Use git.kernel.org not www.kernel.org Signed-off-by: Joe Perches Cc: James Morris Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 765c3c50f81a..81d68d5b7eea 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4635,7 +4635,7 @@ F: drivers/mmc/host/sdhci-s3c.c SECURITY SUBSYSTEM M: James Morris L: linux-security-module@vger.kernel.org (suggested Cc:) -T: git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git W: http://security.wiki.kernel.org/ S: Supported F: security/ From 93f40e6f1493ae0c1e04760b221c125ef5e47205 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 11 Nov 2009 14:26:47 -0800 Subject: [PATCH 363/743] fb: put framebuffer drivers back under the "frame buffer devices" menu The config FB_PRE_INIT_FB entry in drivers/video/Kconfig pushes all entries below it out of the menuconfig selection. Fix this. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 9bbb2855ea91..188e1ba3b69f 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2121,7 +2121,7 @@ config FB_EP93XX config FB_PRE_INIT_FB bool "Don't reinitialize, use bootloader's GDC/Display configuration" - depends on FB_MB862XX_LIME + depends on FB && FB_MB862XX_LIME ---help--- Select this option if display contents should be inherited as set by the bootloader. From fc63cf237078c86214abcb2ee9926d8ad289da9b Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 11 Nov 2009 14:26:48 -0800 Subject: [PATCH 364/743] exec: setup_arg_pages() fails to return errors In setup_arg_pages we work hard to assign a value to ret, but on exit we always return 0. Also remove a now duplicated exit path and branch to out_unlock instead. Signed-off-by: Anton Blanchard Acked-by: Serge Hallyn Reviewed-by: WANG Cong Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/exec.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index d49be6bc1793..ba112bd4a339 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -624,10 +624,8 @@ int setup_arg_pages(struct linux_binprm *bprm, /* Move stack pages down in memory. */ if (stack_shift) { ret = shift_arg_pages(vma, stack_shift); - if (ret) { - up_write(&mm->mmap_sem); - return ret; - } + if (ret) + goto out_unlock; } #ifdef CONFIG_STACK_GROWSUP @@ -641,7 +639,7 @@ int setup_arg_pages(struct linux_binprm *bprm, out_unlock: up_write(&mm->mmap_sem); - return 0; + return ret; } EXPORT_SYMBOL(setup_arg_pages); From 61df33370c52633b47d794f5e024eb15ca9a2efe Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Wed, 11 Nov 2009 14:26:48 -0800 Subject: [PATCH 365/743] rtc-vr41xx: fix do_div() warning drivers/rtc/rtc-vr41xx.c: In function 'vr41xx_rtc_irq_set_freq': drivers/rtc/rtc-vr41xx.c:217: warning: comparison of distinct pointer types lacks a cast drivers/rtc/rtc-vr41xx.c:217: warning: right shift count >= width of type drivers/rtc/rtc-vr41xx.c:217: warning: passing argument 1 of '__div64_32' from incompatible pointer type include/asm-generic/div64.h:35: note: expected 'uint64_t *' but argument is of type 'long unsigned int *' Signed-off-by: Yoichi Yuasa Cc: Alessandro Zummo Cc: Paul Gortmaker Cc: Paul Mundt Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-vr41xx.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c index 2c839d0d21bd..fadddac1e5a4 100644 --- a/drivers/rtc/rtc-vr41xx.c +++ b/drivers/rtc/rtc-vr41xx.c @@ -209,19 +209,18 @@ static int vr41xx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm) static int vr41xx_rtc_irq_set_freq(struct device *dev, int freq) { - unsigned long count; + u64 count; if (!is_power_of_2(freq)) return -EINVAL; count = RTC_FREQUENCY; do_div(count, freq); - periodic_count = count; - spin_lock_irq(&rtc_lock); - rtc1_write(RTCL1LREG, count); - rtc1_write(RTCL1HREG, count >> 16); + periodic_count = count; + rtc1_write(RTCL1LREG, periodic_count); + rtc1_write(RTCL1HREG, periodic_count >> 16); spin_unlock_irq(&rtc_lock); From bcb3a1676b87effbdeffe8da5c44f63433d158d9 Mon Sep 17 00:00:00 2001 From: Scott Valentine Date: Wed, 11 Nov 2009 14:26:49 -0800 Subject: [PATCH 366/743] rtc: v3020: fix v3020_mmio_read_bit() v3020_mmio_read_bit() always returns 0 when left_shift > 7. v3020_mmio_read_bit()'s return type is (unsigned char). The code returns a value masked by (1 << left_shift) that is casted to the return type. If left_shift is larger than 7, the cast will always result in a 0 return value. The problem was discovered with left_shift = 16, and the included patch corrects the problem. The bug was introduced in the last (Apr 3 2009) commit of the file, kernel versions 2.6.30 and later. Cc: Alessandro Zummo Cc: Paul Gortmaker Cc: Raphael Assenat Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-v3020.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-v3020.c b/drivers/rtc/rtc-v3020.c index ad164056feb6..423cd5a30b10 100644 --- a/drivers/rtc/rtc-v3020.c +++ b/drivers/rtc/rtc-v3020.c @@ -96,7 +96,7 @@ static void v3020_mmio_write_bit(struct v3020 *chip, unsigned char bit) static unsigned char v3020_mmio_read_bit(struct v3020 *chip) { - return readl(chip->ioaddress) & (1 << chip->leftshift); + return !!(readl(chip->ioaddress) & (1 << chip->leftshift)); } static struct v3020_chip_ops v3020_mmio_ops = { From d62668e1dd830a81ef73ec73386b420cb2a9ca62 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 11 Nov 2009 14:26:50 -0800 Subject: [PATCH 367/743] gpiolib: fix device_create() result check In case of failure, device_create() returns not NULL but the error code. The current code checks for non-NULL though which causes kernel oops in sysfs_create_group() when device_create() fails. Check for error using IS_ERR() and propagate the error value using PTR_ERR() instead of fixed -ENODEV code returned now... Signed-off-by: Sergei Shtylyov Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/gpiolib.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 662ed923d9eb..50de0f5750d8 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -661,7 +661,7 @@ int gpio_export(unsigned gpio, bool direction_may_change) dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0), desc, ioname ? ioname : "gpio%d", gpio); - if (dev) { + if (!IS_ERR(dev)) { if (direction_may_change) status = sysfs_create_group(&dev->kobj, &gpio_attr_group); @@ -679,7 +679,7 @@ int gpio_export(unsigned gpio, bool direction_may_change) if (status != 0) device_unregister(dev); } else - status = -ENODEV; + status = PTR_ERR(dev); if (status == 0) set_bit(FLAG_EXPORT, &desc->flags); } @@ -800,11 +800,11 @@ static int gpiochip_export(struct gpio_chip *chip) mutex_lock(&sysfs_lock); dev = device_create(&gpio_class, chip->dev, MKDEV(0, 0), chip, "gpiochip%d", chip->base); - if (dev) { + if (!IS_ERR(dev)) { status = sysfs_create_group(&dev->kobj, &gpiochip_attr_group); } else - status = -ENODEV; + status = PTR_ERR(dev); chip->exported = (status == 0); mutex_unlock(&sysfs_lock); From 69fd8d24673a8f4f8be5db7f84b5dc9e4ff354c8 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 11 Nov 2009 14:26:51 -0800 Subject: [PATCH 368/743] drivers/video/msm: update to new kernel TASK_INTERRUPTIBLE and friends are now only available after including , so include it when needed. bus_id is no longer available/necessary, so remove that. Android pmem driver is not available in mainline, so remove its hooks from drivers/video. Signed-off-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/msm/mddi.c | 1 + drivers/video/msm/mddi_client_nt35399.c | 1 + drivers/video/msm/mddi_client_toshiba.c | 1 + drivers/video/msm/mdp.c | 18 ------------------ drivers/video/msm/mdp_ppp.c | 20 -------------------- 5 files changed, 3 insertions(+), 38 deletions(-) diff --git a/drivers/video/msm/mddi.c b/drivers/video/msm/mddi.c index 5c5a1ad1d397..474421fe79a6 100644 --- a/drivers/video/msm/mddi.c +++ b/drivers/video/msm/mddi.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/video/msm/mddi_client_nt35399.c b/drivers/video/msm/mddi_client_nt35399.c index 9c78050ac799..c9e9349451cb 100644 --- a/drivers/video/msm/mddi_client_nt35399.c +++ b/drivers/video/msm/mddi_client_nt35399.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include diff --git a/drivers/video/msm/mddi_client_toshiba.c b/drivers/video/msm/mddi_client_toshiba.c index 80d0f5fdf0b1..71048e78f7f0 100644 --- a/drivers/video/msm/mddi_client_toshiba.c +++ b/drivers/video/msm/mddi_client_toshiba.c @@ -20,6 +20,7 @@ #include #include #include +#include #include diff --git a/drivers/video/msm/mdp.c b/drivers/video/msm/mdp.c index 99636a2b20f2..6c519e2fa2b7 100644 --- a/drivers/video/msm/mdp.c +++ b/drivers/video/msm/mdp.c @@ -22,9 +22,6 @@ #include #include #include -#ifdef CONFIG_ANDROID_PMEM -#include -#endif #include #include @@ -262,11 +259,6 @@ int get_img(struct mdp_img *img, struct fb_info *info, struct file *file; unsigned long vstart; -#ifdef CONFIG_ANDROID_PMEM - if (!get_pmem_file(img->memory_id, start, &vstart, len, filep)) - return 0; -#endif - file = fget_light(img->memory_id, &put_needed); if (file == NULL) return -1; @@ -283,12 +275,6 @@ int get_img(struct mdp_img *img, struct fb_info *info, void put_img(struct file *src_file, struct file *dst_file) { -#ifdef CONFIG_ANDROID_PMEM - if (src_file) - put_pmem_file(src_file); - if (dst_file) - put_pmem_file(dst_file); -#endif } int mdp_blit(struct mdp_device *mdp_dev, struct fb_info *fb, @@ -320,9 +306,6 @@ int mdp_blit(struct mdp_device *mdp_dev, struct fb_info *fb, if (unlikely(get_img(&req->dst, fb, &dst_start, &dst_len, &dst_file))) { printk(KERN_ERR "mpd_ppp: could not retrieve dst image from " "memory\n"); -#ifdef CONFIG_ANDROID_PMEM - put_pmem_file(src_file); -#endif return -EINVAL; } mutex_lock(&mdp_mutex); @@ -499,7 +482,6 @@ int mdp_probe(struct platform_device *pdev) /* register mdp device */ mdp->mdp_dev.dev.parent = &pdev->dev; mdp->mdp_dev.dev.class = mdp_class; - snprintf(mdp->mdp_dev.dev.bus_id, BUS_ID_SIZE, "mdp%d", pdev->id); /* if you can remove the platform device you'd have to implement * this: diff --git a/drivers/video/msm/mdp_ppp.c b/drivers/video/msm/mdp_ppp.c index ba2c4673b648..4ff001f4cbbd 100644 --- a/drivers/video/msm/mdp_ppp.c +++ b/drivers/video/msm/mdp_ppp.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include "mdp_hw.h" @@ -579,25 +578,6 @@ static int valid_src_dst(unsigned long src_start, unsigned long src_len, static void flush_imgs(struct mdp_blit_req *req, struct mdp_regs *regs, struct file *src_file, struct file *dst_file) { -#ifdef CONFIG_ANDROID_PMEM - uint32_t src0_len, src1_len, dst0_len, dst1_len; - - /* flush src images to memory before dma to mdp */ - get_len(&req->src, &req->src_rect, regs->src_bpp, &src0_len, - &src1_len); - flush_pmem_file(src_file, req->src.offset, src0_len); - if (IS_PSEUDOPLNR(req->src.format)) - flush_pmem_file(src_file, req->src.offset + src0_len, - src1_len); - - /* flush dst images */ - get_len(&req->dst, &req->dst_rect, regs->dst_bpp, &dst0_len, - &dst1_len); - flush_pmem_file(dst_file, req->dst.offset, dst0_len); - if (IS_PSEUDOPLNR(req->dst.format)) - flush_pmem_file(dst_file, req->dst.offset + dst0_len, - dst1_len); -#endif } static void get_chroma_addr(struct mdp_img *img, struct mdp_rect *rect, From cbf83cc5a29dba480cf1ba1c5e3417a0d4a31410 Mon Sep 17 00:00:00 2001 From: Rodolfo Giometti Date: Wed, 11 Nov 2009 14:26:52 -0800 Subject: [PATCH 369/743] pps: locking scheme fix up for PPS_GETPARAMS Userland programs may read/write PPS parameters at same time and these operations may corrupt PPS data. Signed-off-by: Rodolfo Giometti Tested-by: Reg Clemens Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pps/pps.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/pps/pps.c b/drivers/pps/pps.c index fea17e7805e9..ca5183bdad85 100644 --- a/drivers/pps/pps.c +++ b/drivers/pps/pps.c @@ -71,9 +71,14 @@ static long pps_cdev_ioctl(struct file *file, case PPS_GETPARAMS: pr_debug("PPS_GETPARAMS: source %d\n", pps->id); - /* Return current parameters */ - err = copy_to_user(uarg, &pps->params, - sizeof(struct pps_kparams)); + spin_lock_irq(&pps->lock); + + /* Get the current parameters */ + params = pps->params; + + spin_unlock_irq(&pps->lock); + + err = copy_to_user(uarg, ¶ms, sizeof(struct pps_kparams)); if (err) return -EFAULT; From 276b282e904f690dc930f9bc946110651f297669 Mon Sep 17 00:00:00 2001 From: Rodolfo Giometti Date: Wed, 11 Nov 2009 14:26:54 -0800 Subject: [PATCH 370/743] pps: events reporting fix up PPS events must be recorded according to PPS's mode settings. If a process asks for (i.e.) capture-assert events only, when the PPS client calls the pps_event() function to save the current PPS event, we should verify the event type and then discard unwanted ones. Also, without this patch userland processes waiting for a specific PPS event (assert or clear but not both) may be awakened at wrong time. Signed-off-by: Rodolfo Giometti Tested-by: William S. Brasher Tested-by: Reg Clemens Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pps/kapi.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/pps/kapi.c b/drivers/pps/kapi.c index 35a0b192d768..2d414e23d390 100644 --- a/drivers/pps/kapi.c +++ b/drivers/pps/kapi.c @@ -271,6 +271,7 @@ void pps_event(int source, struct pps_ktime *ts, int event, void *data) { struct pps_device *pps; unsigned long flags; + int captured = 0; if ((event & (PPS_CAPTUREASSERT | PPS_CAPTURECLEAR)) == 0) { printk(KERN_ERR "pps: unknown event (%x) for source %d\n", @@ -293,7 +294,8 @@ void pps_event(int source, struct pps_ktime *ts, int event, void *data) /* Check the event */ pps->current_mode = pps->params.mode; - if (event & PPS_CAPTUREASSERT) { + if ((event & PPS_CAPTUREASSERT) & + (pps->params.mode & PPS_CAPTUREASSERT)) { /* We have to add an offset? */ if (pps->params.mode & PPS_OFFSETASSERT) pps_add_offset(ts, &pps->params.assert_off_tu); @@ -303,8 +305,11 @@ void pps_event(int source, struct pps_ktime *ts, int event, void *data) pps->assert_sequence++; pr_debug("capture assert seq #%u for source %d\n", pps->assert_sequence, source); + + captured = ~0; } - if (event & PPS_CAPTURECLEAR) { + if ((event & PPS_CAPTURECLEAR) & + (pps->params.mode & PPS_CAPTURECLEAR)) { /* We have to add an offset? */ if (pps->params.mode & PPS_OFFSETCLEAR) pps_add_offset(ts, &pps->params.clear_off_tu); @@ -314,12 +319,17 @@ void pps_event(int source, struct pps_ktime *ts, int event, void *data) pps->clear_sequence++; pr_debug("capture clear seq #%u for source %d\n", pps->clear_sequence, source); + + captured = ~0; } - pps->go = ~0; - wake_up_interruptible(&pps->queue); + /* Wake up iif captured somthing */ + if (captured) { + pps->go = ~0; + wake_up_interruptible(&pps->queue); - kill_fasync(&pps->async_queue, SIGIO, POLL_IN); + kill_fasync(&pps->async_queue, SIGIO, POLL_IN); + } spin_unlock_irqrestore(&pps->lock, flags); From e04b5ef8b49db87d01a9b3a47fe41a918a0c0ff5 Mon Sep 17 00:00:00 2001 From: Mike Hommey Date: Wed, 11 Nov 2009 14:26:55 -0800 Subject: [PATCH 371/743] __generic_block_fiemap(): fix for files bigger than 4GB Because of an integer overflow on start_blk, various kind of wrong results would be returned by the generic_block_fiemap() handler, such as no extents when there is a 4GB+ hole at the beginning of the file, or wrong fe_logical when an extent starts after the first 4GB. Signed-off-by: Mike Hommey Cc: Alexander Viro Cc: Steven Whitehouse Cc: Theodore Ts'o Cc: Eric Sandeen Cc: Josef Bacik Cc: Mark Fasheh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ioctl.c b/fs/ioctl.c index 7b17a14396ff..6c751106c2e5 100644 --- a/fs/ioctl.c +++ b/fs/ioctl.c @@ -254,7 +254,7 @@ int __generic_block_fiemap(struct inode *inode, u64 len, get_block_t *get_block) { struct buffer_head tmp; - unsigned int start_blk; + unsigned long long start_blk; long long length = 0, map_len = 0; u64 logical = 0, phys = 0, size = 0; u32 flags = FIEMAP_EXTENT_MERGED; From 833af8427be4b217b5bc522f61afdbd3f1d282c2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 11 Nov 2009 15:35:18 +0900 Subject: [PATCH 372/743] percpu: restructure pcpu_extend_area_map() to fix bugs and improve readability pcpu_extend_area_map() had the following two bugs. * It should return 1 if pcpu_lock was dropped and reacquired but it returned 0. This could lead to oops if free_percpu() races with area map extension. * pcpu_mem_free() was called under pcpu_lock. pcpu_mem_free() might end up calling vfree() which isn't IRQ safe. This could lead to deadlock through lock order inversion via IRQ. In addition, Linus pointed out that the temporary lock dropping and subtle three-way return value of pcpu_extend_area_map() was very ugly and suggested to split the function into two - pcpu_need_to_extend() and pcpu_extend_area_map(). This patch restructures pcpu_extend_area_map() as suggested and fixes the two bugs. Signed-off-by: Tejun Heo Acked-by: Linus Torvalds Cc: Ingo Molnar --- mm/percpu.c | 121 +++++++++++++++++++++++++++++++++++----------------- 1 file changed, 81 insertions(+), 40 deletions(-) diff --git a/mm/percpu.c b/mm/percpu.c index d90797160c2a..5adfc268b408 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -355,62 +355,86 @@ static struct pcpu_chunk *pcpu_chunk_addr_search(void *addr) } /** - * pcpu_extend_area_map - extend area map for allocation - * @chunk: target chunk + * pcpu_need_to_extend - determine whether chunk area map needs to be extended + * @chunk: chunk of interest * - * Extend area map of @chunk so that it can accomodate an allocation. - * A single allocation can split an area into three areas, so this - * function makes sure that @chunk->map has at least two extra slots. + * Determine whether area map of @chunk needs to be extended to + * accomodate a new allocation. * * CONTEXT: - * pcpu_alloc_mutex, pcpu_lock. pcpu_lock is released and reacquired - * if area map is extended. + * pcpu_lock. * * RETURNS: - * 0 if noop, 1 if successfully extended, -errno on failure. + * New target map allocation length if extension is necessary, 0 + * otherwise. */ -static int pcpu_extend_area_map(struct pcpu_chunk *chunk, unsigned long *flags) +static int pcpu_need_to_extend(struct pcpu_chunk *chunk) { int new_alloc; - int *new; - size_t size; - /* has enough? */ if (chunk->map_alloc >= chunk->map_used + 2) return 0; - spin_unlock_irqrestore(&pcpu_lock, *flags); - new_alloc = PCPU_DFL_MAP_ALLOC; while (new_alloc < chunk->map_used + 2) new_alloc *= 2; - new = pcpu_mem_alloc(new_alloc * sizeof(new[0])); - if (!new) { - spin_lock_irqsave(&pcpu_lock, *flags); + return new_alloc; +} + +/** + * pcpu_extend_area_map - extend area map of a chunk + * @chunk: chunk of interest + * @new_alloc: new target allocation length of the area map + * + * Extend area map of @chunk to have @new_alloc entries. + * + * CONTEXT: + * Does GFP_KERNEL allocation. Grabs and releases pcpu_lock. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int pcpu_extend_area_map(struct pcpu_chunk *chunk, int new_alloc) +{ + int *old = NULL, *new = NULL; + size_t old_size = 0, new_size = new_alloc * sizeof(new[0]); + unsigned long flags; + + new = pcpu_mem_alloc(new_size); + if (!new) return -ENOMEM; - } - /* - * Acquire pcpu_lock and switch to new area map. Only free - * could have happened inbetween, so map_used couldn't have - * grown. - */ - spin_lock_irqsave(&pcpu_lock, *flags); - BUG_ON(new_alloc < chunk->map_used + 2); + /* acquire pcpu_lock and switch to new area map */ + spin_lock_irqsave(&pcpu_lock, flags); - size = chunk->map_alloc * sizeof(chunk->map[0]); - memcpy(new, chunk->map, size); + if (new_alloc <= chunk->map_alloc) + goto out_unlock; + + old_size = chunk->map_alloc * sizeof(chunk->map[0]); + memcpy(new, chunk->map, old_size); /* * map_alloc < PCPU_DFL_MAP_ALLOC indicates that the chunk is * one of the first chunks and still using static map. */ if (chunk->map_alloc >= PCPU_DFL_MAP_ALLOC) - pcpu_mem_free(chunk->map, size); + old = chunk->map; chunk->map_alloc = new_alloc; chunk->map = new; + new = NULL; + +out_unlock: + spin_unlock_irqrestore(&pcpu_lock, flags); + + /* + * pcpu_mem_free() might end up calling vfree() which uses + * IRQ-unsafe lock and thus can't be called under pcpu_lock. + */ + pcpu_mem_free(old, old_size); + pcpu_mem_free(new, new_size); + return 0; } @@ -1049,7 +1073,7 @@ static void *pcpu_alloc(size_t size, size_t align, bool reserved) static int warn_limit = 10; struct pcpu_chunk *chunk; const char *err; - int slot, off; + int slot, off, new_alloc; unsigned long flags; if (unlikely(!size || size > PCPU_MIN_UNIT_SIZE || align > PAGE_SIZE)) { @@ -1064,14 +1088,25 @@ static void *pcpu_alloc(size_t size, size_t align, bool reserved) /* serve reserved allocations from the reserved chunk if available */ if (reserved && pcpu_reserved_chunk) { chunk = pcpu_reserved_chunk; - if (size > chunk->contig_hint || - pcpu_extend_area_map(chunk, &flags) < 0) { - err = "failed to extend area map of reserved chunk"; + + if (size > chunk->contig_hint) { + err = "alloc from reserved chunk failed"; goto fail_unlock; } + + while ((new_alloc = pcpu_need_to_extend(chunk))) { + spin_unlock_irqrestore(&pcpu_lock, flags); + if (pcpu_extend_area_map(chunk, new_alloc) < 0) { + err = "failed to extend area map of reserved chunk"; + goto fail_unlock_mutex; + } + spin_lock_irqsave(&pcpu_lock, flags); + } + off = pcpu_alloc_area(chunk, size, align); if (off >= 0) goto area_found; + err = "alloc from reserved chunk failed"; goto fail_unlock; } @@ -1083,14 +1118,20 @@ restart: if (size > chunk->contig_hint) continue; - switch (pcpu_extend_area_map(chunk, &flags)) { - case 0: - break; - case 1: - goto restart; /* pcpu_lock dropped, restart */ - default: - err = "failed to extend area map"; - goto fail_unlock; + new_alloc = pcpu_need_to_extend(chunk); + if (new_alloc) { + spin_unlock_irqrestore(&pcpu_lock, flags); + if (pcpu_extend_area_map(chunk, + new_alloc) < 0) { + err = "failed to extend area map"; + goto fail_unlock_mutex; + } + spin_lock_irqsave(&pcpu_lock, flags); + /* + * pcpu_lock has been dropped, need to + * restart cpu_slot list walking. + */ + goto restart; } off = pcpu_alloc_area(chunk, size, align); From 2d109a845dd3074885db726892c629ab73dd0ed8 Mon Sep 17 00:00:00 2001 From: "Zou, Nanhai" Date: Fri, 6 Nov 2009 02:13:01 +0000 Subject: [PATCH 373/743] drm/i915: Fix IRQ stall issue on Ironlake The master irq control in DE must be disabled before irq handling, and enable after the process. This fixes the irq stall issue on Ironlake. Cc: Stable Team Signed-off-by: Zou, Nanhai Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_irq.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index c3ceffa46ea0..aa7fd82aa6eb 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -254,10 +254,15 @@ irqreturn_t igdng_irq_handler(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int ret = IRQ_NONE; - u32 de_iir, gt_iir; + u32 de_iir, gt_iir, de_ier; u32 new_de_iir, new_gt_iir; struct drm_i915_master_private *master_priv; + /* disable master interrupt before clearing iir */ + de_ier = I915_READ(DEIER); + I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL); + (void)I915_READ(DEIER); + de_iir = I915_READ(DEIIR); gt_iir = I915_READ(GTIIR); @@ -290,6 +295,9 @@ irqreturn_t igdng_irq_handler(struct drm_device *dev) gt_iir = new_gt_iir; } + I915_WRITE(DEIER, de_ier); + (void)I915_READ(DEIER); + return ret; } From 5586c8bc93ac5fe75f5fd14e8c7add5344d1c548 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 6 Nov 2009 02:13:02 +0000 Subject: [PATCH 374/743] drm/i915: Add more registers save/restore for Ironlake suspend Add more display registers save/restore to fix unstable issues during S4 testing on Ironlake. And DPLL_B_MD should not be restored on Ironlake. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 12 ++++++++++ drivers/gpu/drm/i915/i915_suspend.c | 36 ++++++++++++++++++++++++++++- 2 files changed, 47 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 57204e298975..a725f6591192 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -296,6 +296,7 @@ typedef struct drm_i915_private { u32 saveVBLANK_A; u32 saveVSYNC_A; u32 saveBCLRPAT_A; + u32 saveTRANSACONF; u32 saveTRANS_HTOTAL_A; u32 saveTRANS_HBLANK_A; u32 saveTRANS_HSYNC_A; @@ -326,6 +327,7 @@ typedef struct drm_i915_private { u32 saveVBLANK_B; u32 saveVSYNC_B; u32 saveBCLRPAT_B; + u32 saveTRANSBCONF; u32 saveTRANS_HTOTAL_B; u32 saveTRANS_HBLANK_B; u32 saveTRANS_HSYNC_B; @@ -414,6 +416,16 @@ typedef struct drm_i915_private { u32 savePFB_WIN_SZ; u32 savePFA_WIN_POS; u32 savePFB_WIN_POS; + u32 savePCH_DREF_CONTROL; + u32 saveDISP_ARB_CTL; + u32 savePIPEA_DATA_M1; + u32 savePIPEA_DATA_N1; + u32 savePIPEA_LINK_M1; + u32 savePIPEA_LINK_N1; + u32 savePIPEB_DATA_M1; + u32 savePIPEB_DATA_N1; + u32 savePIPEB_LINK_M1; + u32 savePIPEB_LINK_N1; struct { struct drm_mm gtt_space; diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 992d5617e798..6eec8171a44e 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -239,6 +239,11 @@ static void i915_save_modeset_reg(struct drm_device *dev) if (drm_core_check_feature(dev, DRIVER_MODESET)) return; + if (IS_IGDNG(dev)) { + dev_priv->savePCH_DREF_CONTROL = I915_READ(PCH_DREF_CONTROL); + dev_priv->saveDISP_ARB_CTL = I915_READ(DISP_ARB_CTL); + } + /* Pipe & plane A info */ dev_priv->savePIPEACONF = I915_READ(PIPEACONF); dev_priv->savePIPEASRC = I915_READ(PIPEASRC); @@ -263,6 +268,11 @@ static void i915_save_modeset_reg(struct drm_device *dev) dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); if (IS_IGDNG(dev)) { + dev_priv->savePIPEA_DATA_M1 = I915_READ(PIPEA_DATA_M1); + dev_priv->savePIPEA_DATA_N1 = I915_READ(PIPEA_DATA_N1); + dev_priv->savePIPEA_LINK_M1 = I915_READ(PIPEA_LINK_M1); + dev_priv->savePIPEA_LINK_N1 = I915_READ(PIPEA_LINK_N1); + dev_priv->saveFDI_TXA_CTL = I915_READ(FDI_TXA_CTL); dev_priv->saveFDI_RXA_CTL = I915_READ(FDI_RXA_CTL); @@ -270,6 +280,7 @@ static void i915_save_modeset_reg(struct drm_device *dev) dev_priv->savePFA_WIN_SZ = I915_READ(PFA_WIN_SZ); dev_priv->savePFA_WIN_POS = I915_READ(PFA_WIN_POS); + dev_priv->saveTRANSACONF = I915_READ(TRANSACONF); dev_priv->saveTRANS_HTOTAL_A = I915_READ(TRANS_HTOTAL_A); dev_priv->saveTRANS_HBLANK_A = I915_READ(TRANS_HBLANK_A); dev_priv->saveTRANS_HSYNC_A = I915_READ(TRANS_HSYNC_A); @@ -314,6 +325,11 @@ static void i915_save_modeset_reg(struct drm_device *dev) dev_priv->saveBCLRPAT_B = I915_READ(BCLRPAT_B); if (IS_IGDNG(dev)) { + dev_priv->savePIPEB_DATA_M1 = I915_READ(PIPEB_DATA_M1); + dev_priv->savePIPEB_DATA_N1 = I915_READ(PIPEB_DATA_N1); + dev_priv->savePIPEB_LINK_M1 = I915_READ(PIPEB_LINK_M1); + dev_priv->savePIPEB_LINK_N1 = I915_READ(PIPEB_LINK_N1); + dev_priv->saveFDI_TXB_CTL = I915_READ(FDI_TXB_CTL); dev_priv->saveFDI_RXB_CTL = I915_READ(FDI_RXB_CTL); @@ -321,6 +337,7 @@ static void i915_save_modeset_reg(struct drm_device *dev) dev_priv->savePFB_WIN_SZ = I915_READ(PFB_WIN_SZ); dev_priv->savePFB_WIN_POS = I915_READ(PFB_WIN_POS); + dev_priv->saveTRANSBCONF = I915_READ(TRANSBCONF); dev_priv->saveTRANS_HTOTAL_B = I915_READ(TRANS_HTOTAL_B); dev_priv->saveTRANS_HBLANK_B = I915_READ(TRANS_HBLANK_B); dev_priv->saveTRANS_HSYNC_B = I915_READ(TRANS_HSYNC_B); @@ -368,6 +385,11 @@ static void i915_restore_modeset_reg(struct drm_device *dev) fpb1_reg = FPB1; } + if (IS_IGDNG(dev)) { + I915_WRITE(PCH_DREF_CONTROL, dev_priv->savePCH_DREF_CONTROL); + I915_WRITE(DISP_ARB_CTL, dev_priv->saveDISP_ARB_CTL); + } + /* Pipe & plane A info */ /* Prime the clock */ if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { @@ -395,6 +417,11 @@ static void i915_restore_modeset_reg(struct drm_device *dev) I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A); if (IS_IGDNG(dev)) { + I915_WRITE(PIPEA_DATA_M1, dev_priv->savePIPEA_DATA_M1); + I915_WRITE(PIPEA_DATA_N1, dev_priv->savePIPEA_DATA_N1); + I915_WRITE(PIPEA_LINK_M1, dev_priv->savePIPEA_LINK_M1); + I915_WRITE(PIPEA_LINK_N1, dev_priv->savePIPEA_LINK_N1); + I915_WRITE(FDI_RXA_CTL, dev_priv->saveFDI_RXA_CTL); I915_WRITE(FDI_TXA_CTL, dev_priv->saveFDI_TXA_CTL); @@ -402,6 +429,7 @@ static void i915_restore_modeset_reg(struct drm_device *dev) I915_WRITE(PFA_WIN_SZ, dev_priv->savePFA_WIN_SZ); I915_WRITE(PFA_WIN_POS, dev_priv->savePFA_WIN_POS); + I915_WRITE(TRANSACONF, dev_priv->saveTRANSACONF); I915_WRITE(TRANS_HTOTAL_A, dev_priv->saveTRANS_HTOTAL_A); I915_WRITE(TRANS_HBLANK_A, dev_priv->saveTRANS_HBLANK_A); I915_WRITE(TRANS_HSYNC_A, dev_priv->saveTRANS_HSYNC_A); @@ -439,7 +467,7 @@ static void i915_restore_modeset_reg(struct drm_device *dev) /* Actually enable it */ I915_WRITE(dpll_b_reg, dev_priv->saveDPLL_B); DRM_UDELAY(150); - if (IS_I965G(dev)) + if (IS_I965G(dev) && !IS_IGDNG(dev)) I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD); DRM_UDELAY(150); @@ -454,6 +482,11 @@ static void i915_restore_modeset_reg(struct drm_device *dev) I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B); if (IS_IGDNG(dev)) { + I915_WRITE(PIPEB_DATA_M1, dev_priv->savePIPEB_DATA_M1); + I915_WRITE(PIPEB_DATA_N1, dev_priv->savePIPEB_DATA_N1); + I915_WRITE(PIPEB_LINK_M1, dev_priv->savePIPEB_LINK_M1); + I915_WRITE(PIPEB_LINK_N1, dev_priv->savePIPEB_LINK_N1); + I915_WRITE(FDI_RXB_CTL, dev_priv->saveFDI_RXB_CTL); I915_WRITE(FDI_TXB_CTL, dev_priv->saveFDI_TXB_CTL); @@ -461,6 +494,7 @@ static void i915_restore_modeset_reg(struct drm_device *dev) I915_WRITE(PFB_WIN_SZ, dev_priv->savePFB_WIN_SZ); I915_WRITE(PFB_WIN_POS, dev_priv->savePFB_WIN_POS); + I915_WRITE(TRANSBCONF, dev_priv->saveTRANSBCONF); I915_WRITE(TRANS_HTOTAL_B, dev_priv->saveTRANS_HTOTAL_B); I915_WRITE(TRANS_HBLANK_B, dev_priv->saveTRANS_HBLANK_B); I915_WRITE(TRANS_HSYNC_B, dev_priv->saveTRANS_HSYNC_B); From 9cf1e35cb025eaa52dde37df38e2750b6adb1620 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Tue, 10 Nov 2009 03:10:22 +0000 Subject: [PATCH 375/743] agp/intel: new host bridge support Add new CPU host bridge id, needed for support Ironlake graphics device with it. No change for graphics device itself, so no need to update drm/i915. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/char/agp/intel-agp.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 4068467ce7b9..1d32d5ca5fb0 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -62,6 +62,7 @@ #define PCI_DEVICE_ID_INTEL_IGDNG_D_IG 0x0042 #define PCI_DEVICE_ID_INTEL_IGDNG_M_HB 0x0044 #define PCI_DEVICE_ID_INTEL_IGDNG_MA_HB 0x0062 +#define PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB 0x006a #define PCI_DEVICE_ID_INTEL_IGDNG_M_IG 0x0046 /* cover 915 and 945 variants */ @@ -96,7 +97,8 @@ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_B43_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_D_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_M_HB || \ - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_MA_HB) + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_MA_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB) extern int agp_memory_reserved; @@ -1364,6 +1366,7 @@ static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size) case PCI_DEVICE_ID_INTEL_IGDNG_D_HB: case PCI_DEVICE_ID_INTEL_IGDNG_M_HB: case PCI_DEVICE_ID_INTEL_IGDNG_MA_HB: + case PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB: *gtt_offset = *gtt_size = MB(2); break; default: @@ -2365,6 +2368,8 @@ static const struct intel_driver_description { "IGDNG/M", NULL, &intel_i965_driver }, { PCI_DEVICE_ID_INTEL_IGDNG_MA_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0, "IGDNG/MA", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0, + "IGDNG/MC2", NULL, &intel_i965_driver }, { 0, 0, 0, NULL, NULL, NULL } }; @@ -2561,6 +2566,7 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_IGDNG_D_HB), ID(PCI_DEVICE_ID_INTEL_IGDNG_M_HB), ID(PCI_DEVICE_ID_INTEL_IGDNG_MA_HB), + ID(PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB), { } }; From 156171c71a0dc4bce12b4408bb1591f8fe32dc1a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 12 Nov 2009 16:46:07 -0800 Subject: [PATCH 376/743] Linux 2.6.32-rc7 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index b4c04f734e56..827836128158 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 32 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* From c1ea985c710f41e97f1c72c29bbf367375370f0b Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Thu, 12 Nov 2009 00:13:32 +0900 Subject: [PATCH 377/743] nilfs2: fix lock order reversal in chcp operation Will fix the following lock order reversal lockdep detected: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-rc6 #7 ------------------------------------------------------- chcp/30157 is trying to acquire lock: (&nilfs->ns_mount_mutex){+.+.+.}, at: [] nilfs_cpfile_change_cpmode+0x46/0x752 [nilfs2] but task is already holding lock: (&nilfs->ns_segctor_sem){++++.+}, at: [] nilfs_transaction_begin+0xba/0x110 [nilfs2] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&nilfs->ns_segctor_sem){++++.+}: [] __lock_acquire+0x109c/0x139d [] lock_acquire+0x89/0xa0 [] down_read+0x31/0x45 [] nilfs_attach_checkpoint+0x8f/0x16b [nilfs2] [] nilfs_get_sb+0x3e7/0x653 [nilfs2] [] vfs_kern_mount+0x8b/0x124 [] do_kern_mount+0x37/0xc3 [] do_mount+0x64d/0x69d [] sys_mount+0x66/0x95 [] sysenter_do_call+0x12/0x32 -> #1 (&type->s_umount_key#31/1){+.+.+.}: [] __lock_acquire+0x109c/0x139d [] lock_acquire+0x89/0xa0 [] down_write_nested+0x34/0x52 [] sget+0x22e/0x389 [] nilfs_get_sb+0x187/0x653 [nilfs2] [] vfs_kern_mount+0x8b/0x124 [] do_kern_mount+0x37/0xc3 [] do_mount+0x64d/0x69d [] sys_mount+0x66/0x95 [] sysenter_do_call+0x12/0x32 -> #0 (&nilfs->ns_mount_mutex){+.+.+.}: [] __lock_acquire+0xe27/0x139d [] lock_acquire+0x89/0xa0 [] mutex_lock_nested+0x41/0x23e [] nilfs_cpfile_change_cpmode+0x46/0x752 [nilfs2] [] nilfs_ioctl+0x11a/0x7da [nilfs2] [] vfs_ioctl+0x27/0x6e [] do_vfs_ioctl+0x491/0x4db [] sys_ioctl+0x45/0x5f [] sysenter_do_call+0x12/0x32 Signed-off-by: Ryusuke Konishi --- fs/nilfs2/cpfile.c | 2 -- fs/nilfs2/ioctl.c | 6 +++++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/nilfs2/cpfile.c b/fs/nilfs2/cpfile.c index 1c6cfb59128d..3f5d5d06f53c 100644 --- a/fs/nilfs2/cpfile.c +++ b/fs/nilfs2/cpfile.c @@ -871,7 +871,6 @@ int nilfs_cpfile_change_cpmode(struct inode *cpfile, __u64 cno, int mode) * exclusive with a new mount job. Though it doesn't cover * umount, it's enough for the purpose. */ - mutex_lock(&nilfs->ns_mount_mutex); if (nilfs_checkpoint_is_mounted(nilfs, cno, 1)) { /* Current implementation does not have to protect plain read-only mounts since they are exclusive @@ -880,7 +879,6 @@ int nilfs_cpfile_change_cpmode(struct inode *cpfile, __u64 cno, int mode) ret = -EBUSY; } else ret = nilfs_cpfile_clear_snapshot(cpfile, cno); - mutex_unlock(&nilfs->ns_mount_mutex); return ret; case NILFS_SNAPSHOT: return nilfs_cpfile_set_snapshot(cpfile, cno); diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index d24057d58f17..f6af76042d80 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -99,7 +99,8 @@ static int nilfs_ioctl_wrap_copy(struct the_nilfs *nilfs, static int nilfs_ioctl_change_cpmode(struct inode *inode, struct file *filp, unsigned int cmd, void __user *argp) { - struct inode *cpfile = NILFS_SB(inode->i_sb)->s_nilfs->ns_cpfile; + struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs; + struct inode *cpfile = nilfs->ns_cpfile; struct nilfs_transaction_info ti; struct nilfs_cpmode cpmode; int ret; @@ -109,14 +110,17 @@ static int nilfs_ioctl_change_cpmode(struct inode *inode, struct file *filp, if (copy_from_user(&cpmode, argp, sizeof(cpmode))) return -EFAULT; + mutex_lock(&nilfs->ns_mount_mutex); nilfs_transaction_begin(inode->i_sb, &ti, 0); ret = nilfs_cpfile_change_cpmode( cpfile, cpmode.cm_cno, cpmode.cm_mode); if (unlikely(ret < 0)) { nilfs_transaction_abort(inode->i_sb); + mutex_unlock(&nilfs->ns_mount_mutex); return ret; } nilfs_transaction_commit(inode->i_sb); /* never fails */ + mutex_unlock(&nilfs->ns_mount_mutex); return ret; } From 68fb2e499b054bf8359965422fffac70eff56004 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 9 Nov 2009 02:42:47 +0000 Subject: [PATCH 378/743] uio: pm_runtime_disable is needed if failed Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- drivers/uio/uio_pdrv_genirq.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c index 02347c57357d..aa53db9f2e88 100644 --- a/drivers/uio/uio_pdrv_genirq.c +++ b/drivers/uio/uio_pdrv_genirq.c @@ -178,6 +178,7 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev) return 0; bad1: kfree(priv); + pm_runtime_disable(&pdev->dev); bad0: return ret; } From 0261cd9f1cb42fa44ece314d27868d83742bdf03 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 13 Nov 2009 17:40:48 +1100 Subject: [PATCH 379/743] md: allow v0.91 metadata to record devices as being active but not in-sync. This is a combination that didn't really make sense before. However when a reshape is converting e.g. raid5 -> raid6, the extra device is not fully in-sync, but is certainly active and contains important data. So allow that start to be meaningful and in particular get the 'recovery_offset' value (which is needed for any non-in-sync active device) from the reshape_position. Signed-off-by: NeilBrown --- drivers/md/md.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 01b9a0fd16e0..b182f86a19dd 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -944,6 +944,14 @@ static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev) desc->raid_disk < mddev->raid_disks */) { set_bit(In_sync, &rdev->flags); rdev->raid_disk = desc->raid_disk; + } else if (desc->state & (1<minor_version >= 91) { + rdev->recovery_offset = 0; + rdev->raid_disk = desc->raid_disk; + } } if (desc->state & (1<flags); @@ -1032,8 +1040,19 @@ static void super_90_sync(mddev_t *mddev, mdk_rdev_t *rdev) list_for_each_entry(rdev2, &mddev->disks, same_set) { mdp_disk_t *d; int desc_nr; - if (rdev2->raid_disk >= 0 && test_bit(In_sync, &rdev2->flags) - && !test_bit(Faulty, &rdev2->flags)) + int is_active = test_bit(In_sync, &rdev2->flags); + + if (rdev2->raid_disk >= 0 && + sb->minor_version >= 91) + /* we have nowhere to store the recovery_offset, + * but if it is not below the reshape_position, + * we can piggy-back on that. + */ + is_active = 1; + if (rdev2->raid_disk < 0 || + test_bit(Faulty, &rdev2->flags)) + is_active = 0; + if (is_active) desc_nr = rdev2->raid_disk; else desc_nr = next_spare++; @@ -1043,16 +1062,16 @@ static void super_90_sync(mddev_t *mddev, mdk_rdev_t *rdev) d->number = rdev2->desc_nr; d->major = MAJOR(rdev2->bdev->bd_dev); d->minor = MINOR(rdev2->bdev->bd_dev); - if (rdev2->raid_disk >= 0 && test_bit(In_sync, &rdev2->flags) - && !test_bit(Faulty, &rdev2->flags)) + if (is_active) d->raid_disk = rdev2->raid_disk; else d->raid_disk = rdev2->desc_nr; /* compatibility */ if (test_bit(Faulty, &rdev2->flags)) d->state = (1<flags)) { + else if (is_active) { d->state = (1<state |= (1<flags)) + d->state |= (1< Date: Fri, 13 Nov 2009 17:40:51 +1100 Subject: [PATCH 380/743] Don't unconditionally set in_sync on newly added device in raid5_reshape When a reshape finds that it can add spare devices into the array, those devices might already be 'in_sync' if they are beyond the old size of the array, or they might not if they are within the array. The first case happens when we change an N-drive RAID5 to an N+1-drive RAID5. The second happens when we convert an N-drive RAID5 to an N+1-drive RAID6. So set the flag more carefully. Also, ->recovery_offset is only meaningful when the flag is clear, so only set it in that case. This change needs the preceding two to ensure that the non-in_sync device doesn't get evicted from the array when it is stopped, in the case where v0.90 metadata is used. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index dcce204b6c73..ab40529bdabe 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -5361,9 +5361,11 @@ static int raid5_start_reshape(mddev_t *mddev) !test_bit(Faulty, &rdev->flags)) { if (raid5_add_disk(mddev, rdev) == 0) { char nm[20]; - set_bit(In_sync, &rdev->flags); + if (rdev->raid_disk >= conf->previous_raid_disks) + set_bit(In_sync, &rdev->flags); + else + rdev->recovery_offset = 0; added_devices++; - rdev->recovery_offset = 0; sprintf(nm, "rd%d", rdev->raid_disk); if (sysfs_create_link(&mddev->kobj, &rdev->kobj, nm)) From c148ffdcda00b6599b70f8b65e6a1fadd1dbb127 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 13 Nov 2009 17:47:00 +1100 Subject: [PATCH 381/743] md/raid5: Allow dirty-degraded arrays to be assembled when only party is degraded. Normally is it not safe to allow a raid5 that is both dirty and degraded to be assembled without explicit request from that admin, as it can cause hidden data corruption. This is because 'dirty' means that the parity cannot be trusted, and 'degraded' means that the parity needs to be used. However, if the device that is missing contains only parity, then there is no issue and assembly can continue. This particularly applies when a RAID5 is being converted to a RAID6 and there is an unclean shutdown while the conversion is happening. So check for whether the degraded space only contains parity, and in that case, allow the assembly. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 79 +++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 75 insertions(+), 4 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index ab40529bdabe..d29215d966da 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4823,11 +4823,40 @@ static raid5_conf_t *setup_conf(mddev_t *mddev) return ERR_PTR(-ENOMEM); } + +static int only_parity(int raid_disk, int algo, int raid_disks, int max_degraded) +{ + switch (algo) { + case ALGORITHM_PARITY_0: + if (raid_disk < max_degraded) + return 1; + break; + case ALGORITHM_PARITY_N: + if (raid_disk >= raid_disks - max_degraded) + return 1; + break; + case ALGORITHM_PARITY_0_6: + if (raid_disk == 0 || + raid_disk == raid_disks - 1) + return 1; + break; + case ALGORITHM_LEFT_ASYMMETRIC_6: + case ALGORITHM_RIGHT_ASYMMETRIC_6: + case ALGORITHM_LEFT_SYMMETRIC_6: + case ALGORITHM_RIGHT_SYMMETRIC_6: + if (raid_disk == raid_disks - 1) + return 1; + } + return 0; +} + static int run(mddev_t *mddev) { raid5_conf_t *conf; int working_disks = 0, chunk_size; + int dirty_parity_disks = 0; mdk_rdev_t *rdev; + sector_t reshape_offset = 0; if (mddev->recovery_cp != MaxSector) printk(KERN_NOTICE "raid5: %s is not clean" @@ -4861,6 +4890,7 @@ static int run(mddev_t *mddev) "on a stripe boundary\n"); return -EINVAL; } + reshape_offset = here_new * mddev->new_chunk_sectors; /* here_new is the stripe we will write to */ here_old = mddev->reshape_position; sector_div(here_old, mddev->chunk_sectors * @@ -4916,10 +4946,51 @@ static int run(mddev_t *mddev) /* * 0 for a fully functional array, 1 or 2 for a degraded array. */ - list_for_each_entry(rdev, &mddev->disks, same_set) - if (rdev->raid_disk >= 0 && - test_bit(In_sync, &rdev->flags)) + list_for_each_entry(rdev, &mddev->disks, same_set) { + if (rdev->raid_disk < 0) + continue; + if (test_bit(In_sync, &rdev->flags)) working_disks++; + /* This disc is not fully in-sync. However if it + * just stored parity (beyond the recovery_offset), + * when we don't need to be concerned about the + * array being dirty. + * When reshape goes 'backwards', we never have + * partially completed devices, so we only need + * to worry about reshape going forwards. + */ + /* Hack because v0.91 doesn't store recovery_offset properly. */ + if (mddev->major_version == 0 && + mddev->minor_version > 90) + rdev->recovery_offset = reshape_offset; + + printk("%d: w=%d pa=%d pr=%d m=%d a=%d r=%d op1=%d op2=%d\n", + rdev->raid_disk, working_disks, conf->prev_algo, + conf->previous_raid_disks, conf->max_degraded, + conf->algorithm, conf->raid_disks, + only_parity(rdev->raid_disk, + conf->prev_algo, + conf->previous_raid_disks, + conf->max_degraded), + only_parity(rdev->raid_disk, + conf->algorithm, + conf->raid_disks, + conf->max_degraded)); + if (rdev->recovery_offset < reshape_offset) { + /* We need to check old and new layout */ + if (!only_parity(rdev->raid_disk, + conf->algorithm, + conf->raid_disks, + conf->max_degraded)) + continue; + } + if (!only_parity(rdev->raid_disk, + conf->prev_algo, + conf->previous_raid_disks, + conf->max_degraded)) + continue; + dirty_parity_disks++; + } mddev->degraded = (max(conf->raid_disks, conf->previous_raid_disks) - working_disks); @@ -4935,7 +5006,7 @@ static int run(mddev_t *mddev) mddev->dev_sectors &= ~(mddev->chunk_sectors - 1); mddev->resync_max_sectors = mddev->dev_sectors; - if (mddev->degraded > 0 && + if (mddev->degraded > dirty_parity_disks && mddev->recovery_cp != MaxSector) { if (mddev->ok_start_degraded) printk(KERN_WARNING From 3cc96351799d3d82c3809aa6970ef537bc1af553 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 12 Nov 2009 23:19:05 -0800 Subject: [PATCH 382/743] Input: force LED reset on resume We should be sending EV_LED event down to drivers upon resume even in cases when in-kernel state of the LED is off since device could come up with some leds turned on. Reported-and-tested-by: Mikko Vinni Signed-off-by: Dmitry Torokhov --- drivers/input/input.c | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/drivers/input/input.c b/drivers/input/input.c index cc763c96fada..2266ecbfbc01 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1292,17 +1292,24 @@ static int input_dev_uevent(struct device *device, struct kobj_uevent_env *env) return 0; } -#define INPUT_DO_TOGGLE(dev, type, bits, on) \ - do { \ - int i; \ - if (!test_bit(EV_##type, dev->evbit)) \ - break; \ - for (i = 0; i < type##_MAX; i++) { \ - if (!test_bit(i, dev->bits##bit) || \ - !test_bit(i, dev->bits)) \ - continue; \ - dev->event(dev, EV_##type, i, on); \ - } \ +#define INPUT_DO_TOGGLE(dev, type, bits, on) \ + do { \ + int i; \ + bool active; \ + \ + if (!test_bit(EV_##type, dev->evbit)) \ + break; \ + \ + for (i = 0; i < type##_MAX; i++) { \ + if (!test_bit(i, dev->bits##bit)) \ + continue; \ + \ + active = test_bit(i, dev->bits); \ + if (!active && !on) \ + continue; \ + \ + dev->event(dev, EV_##type, i, on ? active : 0); \ + } \ } while (0) #ifdef CONFIG_PM From d4119bdacfcd88a763e250fe0efa6a2e11d30e88 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 12 Nov 2009 23:19:05 -0800 Subject: [PATCH 383/743] Input: atkbd - restore LED state at reconnect Even though input core tells us to restore LED state and repeat rate at resume keyboard may be reconnected either by request from userspace (via sysfs) or just by pulling it from the box and plugging it back in. In these cases we still need to restore state ourselves. Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 4452eabbee6d..28e6110d1ff8 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -1174,6 +1174,18 @@ static int atkbd_reconnect(struct serio *serio) return -1; atkbd_activate(atkbd); + + /* + * Restore LED state and repeat rate. While input core + * will do this for us at resume time reconnect may happen + * because user requested it via sysfs or simply because + * keyboard was unplugged and plugged in again so we need + * to do it ourselves here. + */ + atkbd_set_leds(atkbd); + if (!atkbd->softrepeat) + atkbd_set_repeat_rate(atkbd); + } atkbd_enable(atkbd); @@ -1422,6 +1434,7 @@ static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count) atkbd->dev = new_dev; atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra); + atkbd_reset_state(atkbd); atkbd_activate(atkbd); atkbd_set_keycode_table(atkbd); atkbd_set_device_attrs(atkbd); From e2e527ae7fb07caa58f8fa8fa7e90ada0b175dd7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 13 Nov 2009 08:28:03 +0100 Subject: [PATCH 384/743] ALSA: hda - Add another Nvidia HDMI codec id (10de:0005) Found on Nvidia 9800M GTS. Reported-by: Chris Balcum Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_nvhdmi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c index 9fb60276f5c9..6afdab09bab7 100644 --- a/sound/pci/hda/patch_nvhdmi.c +++ b/sound/pci/hda/patch_nvhdmi.c @@ -397,6 +397,7 @@ static int patch_nvhdmi_2ch(struct hda_codec *codec) static struct hda_codec_preset snd_hda_preset_nvhdmi[] = { { .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0003, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, + { .id = 0x10de0005, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch }, @@ -406,6 +407,7 @@ static struct hda_codec_preset snd_hda_preset_nvhdmi[] = { MODULE_ALIAS("snd-hda-codec-id:10de0002"); MODULE_ALIAS("snd-hda-codec-id:10de0003"); +MODULE_ALIAS("snd-hda-codec-id:10de0005"); MODULE_ALIAS("snd-hda-codec-id:10de0006"); MODULE_ALIAS("snd-hda-codec-id:10de0007"); MODULE_ALIAS("snd-hda-codec-id:10de0067"); From 3d4c3aa938fcbfee1c7a6d66ee23288448fb97e7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 12 Nov 2009 23:30:52 -0800 Subject: [PATCH 385/743] Input: psmouse - remove unneeded '\n' from psmouse.proto parameter The get parameter function should return a string without a life-feed. Otherwise you'll see additional empty line in sysfs parameters file. Signed-off-by: Takashi Iwai Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/psmouse-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 690aed905436..5bd64841bf1c 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -1673,7 +1673,7 @@ static int psmouse_get_maxproto(char *buffer, struct kernel_param *kp) { int type = *((unsigned int *)kp->arg); - return sprintf(buffer, "%s\n", psmouse_protocol_by_type(type)->name); + return sprintf(buffer, "%s", psmouse_protocol_by_type(type)->name); } static int __init psmouse_init(void) From 69ac74822277fa999a3f469d8362e93262deb3f4 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Fri, 13 Nov 2009 08:47:53 +0100 Subject: [PATCH 386/743] cciss: make device attrs static No need to export those device attributes. In fact, without this patch, we can trip over a build error if cciss is a built-in and another driver also declares and exports attributes with the same name. You'll see errors like: drivers/scsi/built-in.o: multiple definition of `dev_attr_lunid' drivers/block/built-in.o: first defined here Cc: Stephen M. Cameron Signed-off-by: Alex Chiang Cc: Cc: Jens Axboe Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 6399e5090df4..92b126394fa1 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -482,7 +482,7 @@ static ssize_t host_store_rescan(struct device *dev, return count; } -DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan); +static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan); static ssize_t dev_show_unique_id(struct device *dev, struct device_attribute *attr, @@ -512,7 +512,7 @@ static ssize_t dev_show_unique_id(struct device *dev, sn[8], sn[9], sn[10], sn[11], sn[12], sn[13], sn[14], sn[15]); } -DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL); +static DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL); static ssize_t dev_show_vendor(struct device *dev, struct device_attribute *attr, @@ -536,7 +536,7 @@ static ssize_t dev_show_vendor(struct device *dev, else return snprintf(buf, sizeof(vendor) + 1, "%s\n", drv->vendor); } -DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL); +static DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL); static ssize_t dev_show_model(struct device *dev, struct device_attribute *attr, @@ -560,7 +560,7 @@ static ssize_t dev_show_model(struct device *dev, else return snprintf(buf, sizeof(model) + 1, "%s\n", drv->model); } -DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL); +static DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL); static ssize_t dev_show_rev(struct device *dev, struct device_attribute *attr, @@ -584,7 +584,7 @@ static ssize_t dev_show_rev(struct device *dev, else return snprintf(buf, sizeof(rev) + 1, "%s\n", drv->rev); } -DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL); +static DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL); static ssize_t cciss_show_lunid(struct device *dev, struct device_attribute *attr, char *buf) @@ -609,7 +609,7 @@ static ssize_t cciss_show_lunid(struct device *dev, lunid[0], lunid[1], lunid[2], lunid[3], lunid[4], lunid[5], lunid[6], lunid[7]); } -DEVICE_ATTR(lunid, S_IRUGO, cciss_show_lunid, NULL); +static DEVICE_ATTR(lunid, S_IRUGO, cciss_show_lunid, NULL); static ssize_t cciss_show_raid_level(struct device *dev, struct device_attribute *attr, char *buf) @@ -632,7 +632,7 @@ static ssize_t cciss_show_raid_level(struct device *dev, return snprintf(buf, strlen(raid_label[raid]) + 7, "RAID %s\n", raid_label[raid]); } -DEVICE_ATTR(raid_level, S_IRUGO, cciss_show_raid_level, NULL); +static DEVICE_ATTR(raid_level, S_IRUGO, cciss_show_raid_level, NULL); static ssize_t cciss_show_usage_count(struct device *dev, struct device_attribute *attr, char *buf) @@ -651,7 +651,7 @@ static ssize_t cciss_show_usage_count(struct device *dev, spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); return snprintf(buf, 20, "%d\n", count); } -DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL); +static DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL); static struct attribute *cciss_host_attrs[] = { &dev_attr_rescan.attr, From b2b36316626f0d6b92c3675a2aa2726efc71d146 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Thu, 5 Nov 2009 08:10:10 +0100 Subject: [PATCH 387/743] [ARM] pxa: fix interrupts number calculation when CONFIG_PXA_HAVE_ISA_IRQS=y Commit d2c37068429b29d6549cf3486fc84b836689e122 ([ARM] pxa: initialize default interrupt priority and use ICHP for IRQ handling) broke ISA interrupt support on pxa27x/3xx. In such a case, PXA_IRQ(0) != 0, and the IRQ number computed from ICHP must be offset by PXA_IRQ(0). Tested on an Arcom Zeus (pxa270), with both CONFIG_PXA_HAVE_ISA_IRQS enabled and disabled. Signed-off-by: Marc Zyngier Tested-by: Haojian Zhuang Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/entry-macro.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S index 241880608ac6..a73bc86a3c26 100644 --- a/arch/arm/mach-pxa/include/mach/entry-macro.S +++ b/arch/arm/mach-pxa/include/mach/entry-macro.S @@ -46,5 +46,6 @@ beq 1001f bic \irqstat, \irqstat, #0x80000000 mov \irqnr, \irqstat, lsr #16 + add \irqnr, \irqnr, #(PXA_IRQ(0)) 1001: .endm From 2b5e080ae946b4a346b842a73d80f319b7a6453c Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 21 Oct 2009 13:25:50 +0200 Subject: [PATCH 388/743] [ARM] pxa: fix missing underscores in mfp-pxa910.h Underscores were missing. Signed-off-by: Roel Kluin Signed-off-by: Eric Miao --- arch/arm/mach-mmp/include/mach/mfp-pxa910.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h index bf1189ff9a34..7e8a80f25ddc 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h @@ -160,7 +160,7 @@ #define MMC1_WP_MMC1_WP MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM) /* PWM */ -#define GPIO27 PWM3 AF2 MFP_CFG(GPIO27, AF2) +#define GPIO27_PWM3_AF2 MFP_CFG(GPIO27, AF2) #define GPIO51_PWM2_OUT MFP_CFG(GPIO51, AF2) #define GPIO117_PWM1_OUT MFP_CFG(GPIO117, AF2) #define GPIO118_PWM2_OUT MFP_CFG(GPIO118, AF2) From 15f593cfcb1178f832aaf9ec0200acd8c3c3348c Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 8 Nov 2009 03:05:11 +0100 Subject: [PATCH 389/743] [ARM] pxa/colibri: fix AC97 ifdefs and add missing include The AC97 part wasn't initialized on Colibri/PXA320 because the macros were wrong. Also, the code didn't compile because of a header file not being included. Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/colibri-pxa320.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 494572825c7d..ec0e14b96682 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "generic.h" #include "devices.h" @@ -145,7 +146,8 @@ static void __init colibri_pxa320_init_lcd(void) static inline void colibri_pxa320_init_lcd(void) {} #endif -#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE) +#if defined(CONFIG_SND_AC97_CODEC) || \ + defined(CONFIG_SND_AC97_CODEC_MODULE) static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = { GPIO34_AC97_SYSCLK, GPIO35_AC97_SDATA_IN_0, From 1c622ae67bfc729891f5cd80795b15b87e6ac471 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 13 Nov 2009 09:31:35 +0100 Subject: [PATCH 390/743] netfilter: xt_osf: fix xt_osf_remove_callback() return value Return a negative error value. Signed-off-by: Roel Kluin Signed-off-by: Patrick McHardy --- net/netfilter/xt_osf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_osf.c b/net/netfilter/xt_osf.c index 63e190504656..4d1a41bbd5d7 100644 --- a/net/netfilter/xt_osf.c +++ b/net/netfilter/xt_osf.c @@ -118,7 +118,7 @@ static int xt_osf_remove_callback(struct sock *ctnl, struct sk_buff *skb, { struct xt_osf_user_finger *f; struct xt_osf_finger *sf; - int err = ENOENT; + int err = -ENOENT; if (!osf_attrs[OSF_ATTR_FINGER]) return -EINVAL; From 7378396cd172cc058fa62220c6486419046c4e0c Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 13 Nov 2009 09:34:44 +0100 Subject: [PATCH 391/743] netfilter: nf_log: fix sleeping function called from invalid context in seq_show() [ 171.925285] BUG: sleeping function called from invalid context at kernel/mutex.c:280 [ 171.925296] in_atomic(): 1, irqs_disabled(): 0, pid: 671, name: grep [ 171.925306] 2 locks held by grep/671: [ 171.925312] #0: (&p->lock){+.+.+.}, at: [] seq_read+0x25/0x36c [ 171.925340] #1: (rcu_read_lock){.+.+..}, at: [] seq_start+0x0/0x44 [ 171.925372] Pid: 671, comm: grep Not tainted 2.6.31.6-4-netbook #3 [ 171.925380] Call Trace: [ 171.925398] [] ? __debug_show_held_locks+0x1e/0x20 [ 171.925414] [] __might_sleep+0xfb/0x102 [ 171.925430] [] mutex_lock_nested+0x1c/0x2ad [ 171.925444] [] seq_show+0x74/0x127 [ 171.925456] [] seq_read+0x1b4/0x36c [ 171.925469] [] ? seq_read+0x0/0x36c [ 171.925483] [] proc_reg_read+0x60/0x74 [ 171.925496] [] ? proc_reg_read+0x0/0x74 [ 171.925510] [] vfs_read+0x87/0x110 [ 171.925523] [] sys_read+0x3b/0x60 [ 171.925538] [] syscall_call+0x7/0xb Fix it by replacing RCU with nf_log_mutex. Reported-by: "Yin, Kangkai" Signed-off-by: Wu Fengguang Signed-off-by: Patrick McHardy --- net/netfilter/nf_log.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index c93494fef8ef..d65d3481919c 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -128,9 +128,8 @@ EXPORT_SYMBOL(nf_log_packet); #ifdef CONFIG_PROC_FS static void *seq_start(struct seq_file *seq, loff_t *pos) - __acquires(RCU) { - rcu_read_lock(); + mutex_lock(&nf_log_mutex); if (*pos >= ARRAY_SIZE(nf_loggers)) return NULL; @@ -149,9 +148,8 @@ static void *seq_next(struct seq_file *s, void *v, loff_t *pos) } static void seq_stop(struct seq_file *s, void *v) - __releases(RCU) { - rcu_read_unlock(); + mutex_unlock(&nf_log_mutex); } static int seq_show(struct seq_file *s, void *v) @@ -161,7 +159,7 @@ static int seq_show(struct seq_file *s, void *v) struct nf_logger *t; int ret; - logger = rcu_dereference(nf_loggers[*pos]); + logger = nf_loggers[*pos]; if (!logger) ret = seq_printf(s, "%2lld NONE (", *pos); @@ -171,22 +169,16 @@ static int seq_show(struct seq_file *s, void *v) if (ret < 0) return ret; - mutex_lock(&nf_log_mutex); list_for_each_entry(t, &nf_loggers_l[*pos], list[*pos]) { ret = seq_printf(s, "%s", t->name); - if (ret < 0) { - mutex_unlock(&nf_log_mutex); + if (ret < 0) return ret; - } if (&t->list[*pos] != nf_loggers_l[*pos].prev) { ret = seq_printf(s, ","); - if (ret < 0) { - mutex_unlock(&nf_log_mutex); + if (ret < 0) return ret; - } } } - mutex_unlock(&nf_log_mutex); return seq_printf(s, ")\n"); } From 9da4ea69f28cf2bd20be86eda34afbc03c2180c7 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 13 Nov 2009 16:44:14 +0800 Subject: [PATCH 392/743] [ARM] pxa: fix incorrect mfp_to_gpio() conversion Since MFP_PIN_GPIO* now includes 128-255, mfp_to_gpio() is no longer valid for those additional pins, fix it. Signed-off-by: Eric Miao --- arch/arm/plat-pxa/include/plat/mfp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 22086e696e8e..857a6839071c 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -16,7 +16,7 @@ #ifndef __ASM_PLAT_MFP_H #define __ASM_PLAT_MFP_H -#define mfp_to_gpio(m) ((m) % 128) +#define mfp_to_gpio(m) ((m) % 256) /* list of all the configurable MFP pins */ enum { From ccaf6553963bc6304d5820962a08a4397d0a2dc2 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Fri, 13 Nov 2009 15:43:51 +0100 Subject: [PATCH 393/743] [S390] monreader: fix use after free bug with suspend/resume The monreader device driver doesn't set dev->driver_data to NULL after freeing the corresponding data structure. This leads to a use after free bug in the freeze/thaw suspend/resume functions after the device has been opened and closed once. Fix this by clearing dev->driver_data in the close() function. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- drivers/s390/char/monreader.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/s390/char/monreader.c b/drivers/s390/char/monreader.c index 89ece1c235aa..66e21dd23154 100644 --- a/drivers/s390/char/monreader.c +++ b/drivers/s390/char/monreader.c @@ -357,6 +357,7 @@ static int mon_close(struct inode *inode, struct file *filp) atomic_set(&monpriv->msglim_count, 0); monpriv->write_index = 0; monpriv->read_index = 0; + dev_set_drvdata(monreader_device, NULL); for (i = 0; i < MON_MSGLIM; i++) kfree(monpriv->msg_array[i]); From b89031e087a47819be48028e62cebade5f9fb75b Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 13 Nov 2009 15:43:52 +0100 Subject: [PATCH 394/743] [S390] reset cputime accounting after IPL from NSS After an IPL from NSS the uptime of the system is incorrect. The reason is that the startup code in head.S is not executed in case of an IPL from NSS. Due to that sched_clock_base_cc which is used to initialze wall_to_monotonic contains the time stamp when the NSS has been created instead of the time stamp of the system start. Reinitialize the cputime accounting values in create_kernel_nss after the SAVESYS CP command that created the NSS segment. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/early.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index bf8b4ae7ff2d..e49e9e0c69fd 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -55,6 +55,7 @@ static void __init reset_tod_clock(void) disabled_wait(0); sched_clock_base_cc = TOD_UNIX_EPOCH; + S390_lowcore.last_update_clock = sched_clock_base_cc; } #ifdef CONFIG_SHARED_KERNEL @@ -167,6 +168,14 @@ static noinline __init void create_kernel_nss(void) return; } + /* re-initialize cputime accounting. */ + sched_clock_base_cc = get_clock(); + S390_lowcore.last_update_clock = sched_clock_base_cc; + S390_lowcore.last_update_timer = 0x7fffffffffffffffULL; + S390_lowcore.user_timer = 0; + S390_lowcore.system_timer = 0; + asm volatile("SPT 0(%0)" : : "a" (&S390_lowcore.last_update_timer)); + /* re-setup boot command line with new ipl vm parms */ ipl_update_parameters(); setup_boot_command_line(); From 8b94c1ed4d8232a452aa9db0f5ac9141d942590f Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 13 Nov 2009 15:43:53 +0100 Subject: [PATCH 395/743] [S390] sclp: undo quiesce handler override on resume In a system where the ctrl-alt-del init action initiated by signal quiesce suspends the machine the quiesce handler override for _machine_restart, _machine_halt and _machine_power_off needs to be undone, otherwise the override is still present in the resumed system. The next shutdown would then load the quiesce state psw instead of performing the correct shutdown action. Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_quiesce.c | 48 +++++++++++++++++++++++++------- 1 file changed, 38 insertions(+), 10 deletions(-) diff --git a/drivers/s390/char/sclp_quiesce.c b/drivers/s390/char/sclp_quiesce.c index 84c191c1cd62..05909a7df8b3 100644 --- a/drivers/s390/char/sclp_quiesce.c +++ b/drivers/s390/char/sclp_quiesce.c @@ -20,9 +20,12 @@ #include "sclp.h" +static void (*old_machine_restart)(char *); +static void (*old_machine_halt)(void); +static void (*old_machine_power_off)(void); + /* Shutdown handler. Signal completion of shutdown by loading special PSW. */ -static void -do_machine_quiesce(void) +static void do_machine_quiesce(void) { psw_t quiesce_psw; @@ -33,23 +36,48 @@ do_machine_quiesce(void) } /* Handler for quiesce event. Start shutdown procedure. */ -static void -sclp_quiesce_handler(struct evbuf_header *evbuf) +static void sclp_quiesce_handler(struct evbuf_header *evbuf) { - _machine_restart = (void *) do_machine_quiesce; - _machine_halt = do_machine_quiesce; - _machine_power_off = do_machine_quiesce; + if (_machine_restart != (void *) do_machine_quiesce) { + old_machine_restart = _machine_restart; + old_machine_halt = _machine_halt; + old_machine_power_off = _machine_power_off; + _machine_restart = (void *) do_machine_quiesce; + _machine_halt = do_machine_quiesce; + _machine_power_off = do_machine_quiesce; + } ctrl_alt_del(); } +/* Undo machine restart/halt/power_off modification on resume */ +static void sclp_quiesce_pm_event(struct sclp_register *reg, + enum sclp_pm_event sclp_pm_event) +{ + switch (sclp_pm_event) { + case SCLP_PM_EVENT_RESTORE: + if (old_machine_restart) { + _machine_restart = old_machine_restart; + _machine_halt = old_machine_halt; + _machine_power_off = old_machine_power_off; + old_machine_restart = NULL; + old_machine_halt = NULL; + old_machine_power_off = NULL; + } + break; + case SCLP_PM_EVENT_FREEZE: + case SCLP_PM_EVENT_THAW: + break; + } +} + static struct sclp_register sclp_quiesce_event = { .receive_mask = EVTYP_SIGQUIESCE_MASK, - .receiver_fn = sclp_quiesce_handler + .receiver_fn = sclp_quiesce_handler, + .pm_event_fn = sclp_quiesce_pm_event }; /* Initialize quiesce driver. */ -static int __init -sclp_quiesce_init(void) +static int __init sclp_quiesce_init(void) { return sclp_register(&sclp_quiesce_event); } From bcc6525fb23d2cec7ffdf908d98826a66823bcb2 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Fri, 13 Nov 2009 15:43:54 +0100 Subject: [PATCH 396/743] [S390] s390: fix single stepping on svc0 On s390 there are two ways of specifying the system call number for the svc instruction. The standard way is to use the immediate field in the instruction (or to use EXecute for values unknown during assemble time). This can encode 256 system calls. The kernel ABI also allows to put the system call number in r1 and then execute svc 0 to enable system call numbers > 255. It turns out that single stepping svc 0 is broken, since the PER program check handler uses r1. We have to use a different register. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/entry.S | 8 ++++---- arch/s390/kernel/entry64.S | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index f43d2ee54464..48215d15762b 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -565,10 +565,10 @@ pgm_svcper: lh %r7,0x8a # get svc number from lowcore l %r9,__LC_THREAD_INFO # load pointer to thread_info struct TRACE_IRQS_OFF - l %r1,__TI_task(%r9) - mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID - mvc __THREAD_per+__PER_address(4,%r1),__LC_PER_ADDRESS - mvc __THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID + l %r8,__TI_task(%r9) + mvc __THREAD_per+__PER_atmid(2,%r8),__LC_PER_ATMID + mvc __THREAD_per+__PER_address(4,%r8),__LC_PER_ADDRESS + mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID oi __TI_flags+3(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP TRACE_IRQS_ON stosm __SF_EMPTY(%r15),0x03 # reenable interrupts diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index a6f7b20df616..9aff1d449b6e 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -543,10 +543,10 @@ pgm_svcper: mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct - lg %r1,__TI_task(%r9) - mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID - mvc __THREAD_per+__PER_address(8,%r1),__LC_PER_ADDRESS - mvc __THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID + lg %r8,__TI_task(%r9) + mvc __THREAD_per+__PER_atmid(2,%r8),__LC_PER_ATMID + mvc __THREAD_per+__PER_address(8,%r8),__LC_PER_ADDRESS + mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID oi __TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP TRACE_IRQS_ON stosm __SF_EMPTY(%r15),0x03 # reenable interrupts From da0bac33413b2888d3623dad3ad19ce76b688f07 Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 2 Nov 2009 11:33:46 -0800 Subject: [PATCH 397/743] MIPS: Fix emulation of 64-bit FPU on FPU-less 64-bit CPUs. Running a 64-bit kernel on a 64-bit CPU without an FPU would cause the emulator to run in 32-bit mode. The c0_Status.FR bit is wired to zero on systems without an FPU, so using that bit to decide how the emulator behaves doesn't allow for proper emulation on 64-bit FPU-less processors. Instead, we need to select the emulator mode based on the user-space ABI. Since the thread flag TIF_32BIT_REGS is used to set c0_Status.FR, we can just use it to decide if the emulator should be in 32-bit or 64-bit mode. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/math-emu/cp1emu.c | 41 +++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 20 deletions(-) diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index 890f77927d62..454b53924490 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -163,33 +163,34 @@ static int isBranchInstr(mips_instruction * i) /* * In the Linux kernel, we support selection of FPR format on the - * basis of the Status.FR bit. This does imply that, if a full 32 - * FPRs are desired, there needs to be a flip-flop that can be written - * to one at that bit position. In any case, O32 MIPS ABI uses - * only the even FPRs (Status.FR = 0). + * basis of the Status.FR bit. If an FPU is not present, the FR bit + * is hardwired to zero, which would imply a 32-bit FPU even for + * 64-bit CPUs. For 64-bit kernels with no FPU we use TIF_32BIT_REGS + * as a proxy for the FR bit so that a 64-bit FPU is emulated. In any + * case, for a 32-bit kernel which uses the O32 MIPS ABI, only the + * even FPRs are used (Status.FR = 0). */ - -#define CP0_STATUS_FR_SUPPORT - -#ifdef CP0_STATUS_FR_SUPPORT -#define FR_BIT ST0_FR +static inline int cop1_64bit(struct pt_regs *xcp) +{ + if (cpu_has_fpu) + return xcp->cp0_status & ST0_FR; +#ifdef CONFIG_64BIT + return !test_thread_flag(TIF_32BIT_REGS); #else -#define FR_BIT 0 + return 0; #endif +} -#define SIFROMREG(si, x) ((si) = \ - (xcp->cp0_status & FR_BIT) || !(x & 1) ? \ - (int)ctx->fpr[x] : \ - (int)(ctx->fpr[x & ~1] >> 32 )) -#define SITOREG(si, x) (ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)] = \ - (xcp->cp0_status & FR_BIT) || !(x & 1) ? \ +#define SIFROMREG(si, x) ((si) = cop1_64bit(xcp) || !(x & 1) ? \ + (int)ctx->fpr[x] : (int)(ctx->fpr[x & ~1] >> 32)) + +#define SITOREG(si, x) (ctx->fpr[x & ~(cop1_64bit(xcp) == 0)] = \ + cop1_64bit(xcp) || !(x & 1) ? \ ctx->fpr[x & ~1] >> 32 << 32 | (u32)(si) : \ ctx->fpr[x & ~1] << 32 >> 32 | (u64)(si) << 32) -#define DIFROMREG(di, x) ((di) = \ - ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)]) -#define DITOREG(di, x) (ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)] \ - = (di)) +#define DIFROMREG(di, x) ((di) = ctx->fpr[x & ~(cop1_64bit(xcp) == 0)]) +#define DITOREG(di, x) (ctx->fpr[x & ~(cop1_64bit(xcp) == 0)] = (di)) #define SPFROMREG(sp, x) SIFROMREG((sp).bits, x) #define SPTOREG(sp, x) SITOREG((sp).bits, x) From f8ac04255dc8baa1c018e8028222d842efa56e6b Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Thu, 4 Jun 2009 00:16:04 +0900 Subject: [PATCH 398/743] MIPS: Add DMA declare coherent memory support The ohci-sm501 driver requires dma_declare_coherent_memory(). It is used by the driver's local memory allocation with dma_alloc_coherent(). Tested on TANBAC TB0287(VR4131 + SM501). [Ralf: Fixed reject in dma-default.c and removed the entire #if 0'ed block in dma-mapping.h instead of just the #if 0.] Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + arch/mips/include/asm/dma-mapping.h | 11 +---------- arch/mips/mm/dma-default.c | 7 +++++++ 3 files changed, 9 insertions(+), 10 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 03bd56a2fb6e..1aad0d9f5074 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1,6 +1,7 @@ config MIPS bool default y + select HAVE_GENERIC_DMA_COHERENT select HAVE_IDE select HAVE_OPROFILE select HAVE_ARCH_KGDB diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h index d16afddb09a9..664ba53dc32a 100644 --- a/arch/mips/include/asm/dma-mapping.h +++ b/arch/mips/include/asm/dma-mapping.h @@ -3,6 +3,7 @@ #include #include +#include void *dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag); @@ -73,14 +74,4 @@ extern int dma_is_consistent(struct device *dev, dma_addr_t dma_addr); extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction direction); -#if 0 -#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY - -extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, - dma_addr_t device_addr, size_t size, int flags); -extern void dma_release_declared_memory(struct device *dev); -extern void * dma_mark_declared_memory_occupied(struct device *dev, - dma_addr_t device_addr, size_t size); -#endif - #endif /* _ASM_DMA_MAPPING_H */ diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index 7e48e76148aa..9367e33fbd18 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -90,6 +90,9 @@ void *dma_alloc_coherent(struct device *dev, size_t size, { void *ret; + if (dma_alloc_from_coherent(dev, size, dma_handle, &ret)) + return ret; + gfp = massage_gfp_flags(dev, gfp); ret = (void *) __get_free_pages(gfp, get_order(size)); @@ -122,6 +125,10 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle) { unsigned long addr = (unsigned long) vaddr; + int order = get_order(size); + + if (dma_release_from_coherent(dev, order, vaddr)) + return; plat_unmap_dma_mem(dev, dma_handle, size, DMA_BIDIRECTIONAL); From c4304529543114a5df7eeec31ec5ee5c7c924738 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sun, 8 Nov 2009 02:20:37 +0900 Subject: [PATCH 399/743] MIPS: Make local arrays with CL_SIZE static __initdata Since commit 22242681cff52bfb7cba5d2a37b91802be7a4e4c ("MIPS: Extend COMMAND_LINE_SIZE"), CL_SIZE is 4096 and local array variables with this size will cause an build failure with default CONFIG_FRAME_WARN settings. Although current users of such array variables are all early bootstrap code and not likely to cause real stack overflow (thread_info corruption), it is preferable to to declare these arrays static with __initdata. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/bcm47xx/prom.c | 2 +- arch/mips/mti-malta/malta-memory.c | 3 ++- arch/mips/rb532/prom.c | 2 +- arch/mips/txx9/generic/setup.c | 4 ++-- 4 files changed, 6 insertions(+), 5 deletions(-) diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c index 079e33d52783..fb284c3b2cff 100644 --- a/arch/mips/bcm47xx/prom.c +++ b/arch/mips/bcm47xx/prom.c @@ -100,7 +100,7 @@ static __init void prom_init_console(void) static __init void prom_init_cmdline(void) { - char buf[CL_SIZE]; + static char buf[CL_SIZE] __initdata; /* Get the kernel command line from CFE */ if (cfe_getenv("LINUX_CMDLINE", buf, CL_SIZE) >= 0) { diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c index 61888ff72c87..9035c64bc5ed 100644 --- a/arch/mips/mti-malta/malta-memory.c +++ b/arch/mips/mti-malta/malta-memory.c @@ -54,7 +54,8 @@ static struct prom_pmemblock * __init prom_getmdesc(void) { char *memsize_str; unsigned int memsize; - char cmdline[CL_SIZE], *ptr; + char *ptr; + static char cmdline[CL_SIZE] __initdata; /* otherwise look in the environment */ memsize_str = prom_getenv("memsize"); diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c index 46ca24dbcc2d..ad5bd1097974 100644 --- a/arch/mips/rb532/prom.c +++ b/arch/mips/rb532/prom.c @@ -69,7 +69,7 @@ static inline unsigned long tag2ul(char *arg, const char *tag) void __init prom_setup_cmdline(void) { - char cmd_line[CL_SIZE]; + static char cmd_line[CL_SIZE] __initdata; char *cp, *board; int prom_argc; char **prom_argv, **prom_envp; diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index e10184c1b3e1..d66802edebb2 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -160,7 +160,7 @@ static void __init prom_init_cmdline(void) int argc; int *argv32; int i; /* Always ignore the "-c" at argv[0] */ - char builtin[CL_SIZE]; + static char builtin[CL_SIZE] __initdata; if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) { /* @@ -315,7 +315,7 @@ static inline void txx9_cache_fixup(void) static void __init preprocess_cmdline(void) { - char cmdline[CL_SIZE]; + static char cmdline[CL_SIZE] __initdata; char *s; strcpy(cmdline, arcs_cmdline); From 1b12a9c87792550a3d7f5f39eb529c822b911b17 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 11 Nov 2009 21:38:46 +0900 Subject: [PATCH 400/743] MIPS: TXx9: Update rbtx49xx_defconfig Enable following features: * MTD (RBTX4939, NAND_TXX9NDFMC) * HW_RANDOM (HW_RANDOM_TX4939) * SOUND (SND_SOC_TXX9ACLC) * DMADEVICE (TXX9_DMAC) Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/configs/rbtx49xx_defconfig | 252 ++++++++++++++++++++------- 1 file changed, 192 insertions(+), 60 deletions(-) diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index c69813b8488c..6c6a19aebe1f 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc7 -# Wed Mar 4 23:08:06 2009 +# Linux kernel version: 2.6.32-rc6 +# Sun Nov 8 22:59:47 2009 # CONFIG_MIPS=y @@ -9,16 +9,18 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set +# CONFIG_AR7 is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set -# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MACH_LOONGSON is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MACH_EMMA is not set +# CONFIG_NEC_MARKEINS is not set # CONFIG_MACH_VR41XX is not set # CONFIG_NXP_STB220 is not set # CONFIG_NXP_STB225 is not set @@ -45,6 +47,7 @@ CONFIG_MACH_TX49XX=y # CONFIG_WR_PPMC is not set # CONFIG_CAVIUM_OCTEON_SIMULATOR is not set # CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set CONFIG_MACH_TXX9=y CONFIG_TOSHIBA_RBTX4927=y CONFIG_TOSHIBA_RBTX4938=y @@ -86,7 +89,6 @@ CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_EARLY_PRINTK=y CONFIG_SYS_HAS_EARLY_PRINTK=y -# CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_GPIO=y CONFIG_CPU_BIG_ENDIAN=y @@ -101,7 +103,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # -# CONFIG_CPU_LOONGSON2 is not set +# CONFIG_CPU_LOONGSON2E is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -137,6 +139,7 @@ CONFIG_32BIT=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y @@ -154,7 +157,10 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -175,6 +181,7 @@ CONFIG_PREEMPT_NONE=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -194,11 +201,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -209,8 +217,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -220,25 +232,35 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y # CONFIG_PCSPKR_PLATFORM is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y +CONFIG_FUTEX=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -246,8 +268,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -274,6 +296,7 @@ CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set CONFIG_MMU=y # @@ -288,6 +311,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set CONFIG_NET=y @@ -295,7 +319,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -311,6 +334,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set @@ -336,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -347,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -365,9 +389,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AR7_PARTS is not set @@ -376,9 +400,9 @@ CONFIG_MTD_CMDLINE_PARTS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y -# CONFIG_MTD_BLKDEVS is not set -# CONFIG_MTD_BLOCK is not set -# CONFIG_MTD_BLOCK_RO is not set +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +CONFIG_MTD_BLOCK_RO=m # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set @@ -414,16 +438,20 @@ CONFIG_MTD_CFI_UTIL=y # # Mapping drivers for chip access # -# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_INTEL_VR_NOR is not set +CONFIG_MTD_RBTX4939=y # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -435,7 +463,15 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_TXX9NDFMC=m # CONFIG_MTD_ONENAND is not set # @@ -471,6 +507,7 @@ CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -534,8 +571,13 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# A new alternative FireWire stack is available with EXPERIMENTAL=y +# You can enable one or both FireWire driver stacks. # + +# +# See the help texts for more information. +# +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y @@ -574,6 +616,8 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set CONFIG_SMC91X=y # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NE2000=y @@ -602,18 +646,15 @@ CONFIG_TC35815=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -653,6 +694,7 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_TXX9=y @@ -666,7 +708,9 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_HW_RANDOM_TX4939=m # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -686,6 +730,10 @@ CONFIG_SPI_TXX9=y # SPI Protocol Masters # # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -701,17 +749,22 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -740,28 +793,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # +# CONFIG_VGA_ARB is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -772,7 +814,42 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_SOUND is not set +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_PCI is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_MIPS is not set +CONFIG_SND_SOC=m +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC_TXX9ACLC=m +CONFIG_HAS_TXX9_ACLC=y +CONFIG_SND_SOC_TXX9ACLC_AC97=m +CONFIG_SND_SOC_TXX9ACLC_GENERIC=m +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_AC97_CODEC=m +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -783,6 +860,8 @@ CONFIG_LEDS_CLASS=y # LED drivers # CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_DAC124S085 is not set # # LED Triggers @@ -792,7 +871,12 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_IDE_DISK=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y @@ -820,6 +904,7 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y # CONFIG_RTC_DRV_R9701 is not set CONFIG_RTC_DRV_RS5C348=y # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -840,8 +925,26 @@ CONFIG_RTC_DRV_DS1742=y # on-CPU RTC drivers # CONFIG_RTC_DRV_TX4939=y -# CONFIG_DMADEVICES is not set +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_TXX9_DMAC=m +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -853,9 +956,10 @@ CONFIG_RTC_DRV_TX4939=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -865,6 +969,10 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y +# +# Caches +# + # # CD-ROM/DVD Filesystems # @@ -890,7 +998,27 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set -# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_HFSPLUS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -922,6 +1050,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +CONFIG_STRIP_ASM_SYMS=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -929,11 +1058,9 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_CMDLINE="" @@ -946,6 +1073,7 @@ CONFIG_CMDLINE="" # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -959,6 +1087,10 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y From 5df9d11be46a9f704208644a1e7f13c6104ecff2 Mon Sep 17 00:00:00 2001 From: "Kevin D. Kissell" Date: Tue, 10 Nov 2009 11:45:46 -0800 Subject: [PATCH 401/743] MIPS: SMTC: Fix lockup in smtc_distribute_timer 1. At the end of smtc_distribute_timer, nextstamp is valid and has already passed so we goto repeat. 2. Nothing updates nextstamp (only updated if the timeout is in the future And we just decided it is in the past) 3. At the end nextstamp still has the same value so it is still valid and in the past. 4. This repeats until read_c0_count has a value which causes nextstamp to be in the future. Reported and initial patch and testing by Mikael Starvik . Signed-off-by: Kevin D. Kissell Cc: Mikael Starvik Cc: linux-mips@linux-mips.org Cc: Jesper Nilsson Patchwork: http://patchwork.linux-mips.org/patch/621/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/cevt-smtc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c index 98bd7de75778..b102e4f1630e 100644 --- a/arch/mips/kernel/cevt-smtc.c +++ b/arch/mips/kernel/cevt-smtc.c @@ -173,11 +173,12 @@ void smtc_distribute_timer(int vpe) unsigned int mtflags; int cpu; struct clock_event_device *cd; - unsigned long nextstamp = 0L; + unsigned long nextstamp; unsigned long reference; repeat: + nextstamp = 0L; for_each_online_cpu(cpu) { /* * Find virtual CPUs within the current VPE who have From 2bf30108435339c4cf149f9d279d0dc961345393 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 12 Nov 2009 20:31:14 +0100 Subject: [PATCH 402/743] [ARM] Kirkwood: disable propagation of mbus error to the CPU local bus Disable propagation of mbus errors to the CPU local bus, as this causes mbus errors (which can occur for example for PCI aborts) to throw CPU aborts, which we're not set up to deal with. Reported-by: Dieter Kiermaier Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/common.c | 8 ++++++++ arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 3 +++ 2 files changed, 11 insertions(+) diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 7177c4aa6342..242dd0775343 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -915,6 +915,14 @@ void __init kirkwood_init(void) kirkwood_uart0_data[0].uartclk = kirkwood_tclk; kirkwood_uart1_data[0].uartclk = kirkwood_tclk; + /* + * Disable propagation of mbus errors to the CPU local bus, + * as this causes mbus errors (which can occur for example + * for PCI aborts) to throw CPU aborts, which we're not set + * up to deal with. + */ + writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); + kirkwood_setup_cpu_mbus(); #ifdef CONFIG_CACHE_FEROCEON_L2 diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 9e80d9232c83..418f5017c50e 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -13,6 +13,9 @@ #include +#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0100) +#define CPU_CONFIG_ERROR_PROP 0x00000004 + #define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) #define CPU_RESET 0x00000002 From d792c1006fe92448217b71513d3955868358271d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Fri, 13 Nov 2009 13:56:33 -0800 Subject: [PATCH 403/743] tcp: provide more information on the tcp receive_queue bugs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The addition of rcv_nxt allows to discern whether the skb was out of place or tp->copied. Also catch fancy combination of flags if necessary (sadly we might miss the actual causer flags as it might have already returned). Btw, we perhaps would want to forward copied_seq in somewhere or otherwise we might have some nice loop with WARN stuff within but where to do that safely I don't know at this stage until more is known (but it is not made significantly worse by this patch). Signed-off-by: Ilpo Järvinen Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 98440ad82558..f1813bc71088 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1183,7 +1183,9 @@ void tcp_cleanup_rbuf(struct sock *sk, int copied) #if TCP_DEBUG struct sk_buff *skb = skb_peek(&sk->sk_receive_queue); - WARN_ON(skb && !before(tp->copied_seq, TCP_SKB_CB(skb)->end_seq)); + WARN(skb && !before(tp->copied_seq, TCP_SKB_CB(skb)->end_seq), + KERN_INFO "cleanup rbuf bug: copied %X seq %X rcvnxt %X\n", + tp->copied_seq, TCP_SKB_CB(skb)->end_seq, tp->rcv_nxt); #endif if (inet_csk_ack_scheduled(sk)) { @@ -1430,11 +1432,13 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, /* Now that we have two receive queues this * shouldn't happen. */ - if (before(*seq, TCP_SKB_CB(skb)->seq)) { - printk(KERN_INFO "recvmsg bug: copied %X " - "seq %X\n", *seq, TCP_SKB_CB(skb)->seq); + if (WARN(before(*seq, TCP_SKB_CB(skb)->seq), + KERN_INFO "recvmsg bug: copied %X " + "seq %X rcvnxt %X fl %X\n", *seq, + TCP_SKB_CB(skb)->seq, tp->rcv_nxt, + flags)) break; - } + offset = *seq - TCP_SKB_CB(skb)->seq; if (tcp_hdr(skb)->syn) offset--; @@ -1443,8 +1447,9 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, if (tcp_hdr(skb)->fin) goto found_fin_ok; WARN(!(flags & MSG_PEEK), KERN_INFO "recvmsg bug 2: " - "copied %X seq %X\n", *seq, - TCP_SKB_CB(skb)->seq); + "copied %X seq %X rcvnxt %X fl %X\n", + *seq, TCP_SKB_CB(skb)->seq, + tp->rcv_nxt, flags); } /* Well, if we have backlog, try to process it now yet. */ From 8cc3174ef98fbb317d9ee18e20102908ff7faffc Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Fri, 13 Nov 2009 16:56:13 -0500 Subject: [PATCH 404/743] Revert "libipw: initiate cfg80211 API conversion" This reverts commit b8ecd988b1670035a05035c553c08331214d6603. Due to poor API call balancing by me, this commit not only broke ipw2200 if it can't find it's firmware, it broke ipw2100 basically anytime you removed the module. At this point in the cycle, let's just put it back to a sane state and try again next time... Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2x00/ipw2100.c | 6 +- drivers/net/wireless/ipw2x00/ipw2200.c | 141 ++++--------------- drivers/net/wireless/ipw2x00/libipw.h | 8 +- drivers/net/wireless/ipw2x00/libipw_module.c | 42 +----- 4 files changed, 36 insertions(+), 161 deletions(-) diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 240cff1e6979..6e2fc0cb6f8a 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -6029,7 +6029,7 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev, struct ipw2100_priv *priv; struct net_device *dev; - dev = alloc_ieee80211(sizeof(struct ipw2100_priv), 0); + dev = alloc_ieee80211(sizeof(struct ipw2100_priv)); if (!dev) return NULL; priv = libipw_priv(dev); @@ -6342,7 +6342,7 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group); - free_ieee80211(dev, 0); + free_ieee80211(dev); pci_set_drvdata(pci_dev, NULL); } @@ -6400,7 +6400,7 @@ static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev) if (dev->base_addr) iounmap((void __iomem *)dev->base_addr); - free_ieee80211(dev, 0); + free_ieee80211(dev); } pci_release_regions(pci_dev); diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 8d58e6ed4e7d..0d30a9e2d3df 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -103,25 +103,6 @@ static int antenna = CFG_SYS_ANTENNA_BOTH; static int rtap_iface = 0; /* def: 0 -- do not create rtap interface */ #endif -static struct ieee80211_rate ipw2200_rates[] = { - { .bitrate = 10 }, - { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 60 }, - { .bitrate = 90 }, - { .bitrate = 120 }, - { .bitrate = 180 }, - { .bitrate = 240 }, - { .bitrate = 360 }, - { .bitrate = 480 }, - { .bitrate = 540 } -}; - -#define ipw2200_a_rates (ipw2200_rates + 4) -#define ipw2200_num_a_rates 8 -#define ipw2200_bg_rates (ipw2200_rates + 0) -#define ipw2200_num_bg_rates 12 #ifdef CONFIG_IPW2200_QOS static int qos_enable = 0; @@ -8673,6 +8654,24 @@ static int ipw_sw_reset(struct ipw_priv *priv, int option) * */ +static int ipw_wx_get_name(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = libipw_priv(dev); + mutex_lock(&priv->mutex); + if (priv->status & STATUS_RF_KILL_MASK) + strcpy(wrqu->name, "radio off"); + else if (!(priv->status & STATUS_ASSOCIATED)) + strcpy(wrqu->name, "unassociated"); + else + snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11%c", + ipw_modes[priv->assoc_request.ieee_mode]); + IPW_DEBUG_WX("Name: %s\n", wrqu->name); + mutex_unlock(&priv->mutex); + return 0; +} + static int ipw_set_channel(struct ipw_priv *priv, u8 channel) { if (channel == 0) { @@ -9972,7 +9971,7 @@ static int ipw_wx_sw_reset(struct net_device *dev, /* Rebase the WE IOCTLs to zero for the handler array */ #define IW_IOCTL(x) [(x)-SIOCSIWCOMMIT] static iw_handler ipw_wx_handlers[] = { - IW_IOCTL(SIOCGIWNAME) = (iw_handler) cfg80211_wext_giwname, + IW_IOCTL(SIOCGIWNAME) = ipw_wx_get_name, IW_IOCTL(SIOCSIWFREQ) = ipw_wx_set_freq, IW_IOCTL(SIOCGIWFREQ) = ipw_wx_get_freq, IW_IOCTL(SIOCSIWMODE) = ipw_wx_set_mode, @@ -11416,100 +11415,16 @@ static void ipw_bg_down(struct work_struct *work) /* Called by register_netdev() */ static int ipw_net_init(struct net_device *dev) { - int i, rc = 0; struct ipw_priv *priv = libipw_priv(dev); - const struct libipw_geo *geo = libipw_get_geo(priv->ieee); - struct wireless_dev *wdev = &priv->ieee->wdev; mutex_lock(&priv->mutex); if (ipw_up(priv)) { - rc = -EIO; - goto out; + mutex_unlock(&priv->mutex); + return -EIO; } - memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN); - - /* fill-out priv->ieee->bg_band */ - if (geo->bg_channels) { - struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band; - - bg_band->band = IEEE80211_BAND_2GHZ; - bg_band->n_channels = geo->bg_channels; - bg_band->channels = - kzalloc(geo->bg_channels * - sizeof(struct ieee80211_channel), GFP_KERNEL); - /* translate geo->bg to bg_band.channels */ - for (i = 0; i < geo->bg_channels; i++) { - bg_band->channels[i].band = IEEE80211_BAND_2GHZ; - bg_band->channels[i].center_freq = geo->bg[i].freq; - bg_band->channels[i].hw_value = geo->bg[i].channel; - bg_band->channels[i].max_power = geo->bg[i].max_power; - if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY) - bg_band->channels[i].flags |= - IEEE80211_CHAN_PASSIVE_SCAN; - if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS) - bg_band->channels[i].flags |= - IEEE80211_CHAN_NO_IBSS; - if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT) - bg_band->channels[i].flags |= - IEEE80211_CHAN_RADAR; - /* No equivalent for LIBIPW_CH_80211H_RULES, - LIBIPW_CH_UNIFORM_SPREADING, or - LIBIPW_CH_B_ONLY... */ - } - /* point at bitrate info */ - bg_band->bitrates = ipw2200_bg_rates; - bg_band->n_bitrates = ipw2200_num_bg_rates; - - wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = bg_band; - } - - /* fill-out priv->ieee->a_band */ - if (geo->a_channels) { - struct ieee80211_supported_band *a_band = &priv->ieee->a_band; - - a_band->band = IEEE80211_BAND_5GHZ; - a_band->n_channels = geo->a_channels; - a_band->channels = - kzalloc(geo->a_channels * - sizeof(struct ieee80211_channel), GFP_KERNEL); - /* translate geo->bg to a_band.channels */ - for (i = 0; i < geo->a_channels; i++) { - a_band->channels[i].band = IEEE80211_BAND_2GHZ; - a_band->channels[i].center_freq = geo->a[i].freq; - a_band->channels[i].hw_value = geo->a[i].channel; - a_band->channels[i].max_power = geo->a[i].max_power; - if (geo->a[i].flags & LIBIPW_CH_PASSIVE_ONLY) - a_band->channels[i].flags |= - IEEE80211_CHAN_PASSIVE_SCAN; - if (geo->a[i].flags & LIBIPW_CH_NO_IBSS) - a_band->channels[i].flags |= - IEEE80211_CHAN_NO_IBSS; - if (geo->a[i].flags & LIBIPW_CH_RADAR_DETECT) - a_band->channels[i].flags |= - IEEE80211_CHAN_RADAR; - /* No equivalent for LIBIPW_CH_80211H_RULES, - LIBIPW_CH_UNIFORM_SPREADING, or - LIBIPW_CH_B_ONLY... */ - } - /* point at bitrate info */ - a_band->bitrates = ipw2200_a_rates; - a_band->n_bitrates = ipw2200_num_a_rates; - - wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = a_band; - } - - set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev); - - /* With that information in place, we can now register the wiphy... */ - if (wiphy_register(wdev->wiphy)) { - rc = -EIO; - goto out; - } - -out: mutex_unlock(&priv->mutex); - return rc; + return 0; } /* PCI driver stuff */ @@ -11640,7 +11555,7 @@ static int ipw_prom_alloc(struct ipw_priv *priv) if (priv->prom_net_dev) return -EPERM; - priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv), 1); + priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv)); if (priv->prom_net_dev == NULL) return -ENOMEM; @@ -11659,7 +11574,7 @@ static int ipw_prom_alloc(struct ipw_priv *priv) rc = register_netdev(priv->prom_net_dev); if (rc) { - free_ieee80211(priv->prom_net_dev, 1); + free_ieee80211(priv->prom_net_dev); priv->prom_net_dev = NULL; return rc; } @@ -11673,7 +11588,7 @@ static void ipw_prom_free(struct ipw_priv *priv) return; unregister_netdev(priv->prom_net_dev); - free_ieee80211(priv->prom_net_dev, 1); + free_ieee80211(priv->prom_net_dev); priv->prom_net_dev = NULL; } @@ -11701,7 +11616,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, struct ipw_priv *priv; int i; - net_dev = alloc_ieee80211(sizeof(struct ipw_priv), 0); + net_dev = alloc_ieee80211(sizeof(struct ipw_priv)); if (net_dev == NULL) { err = -ENOMEM; goto out; @@ -11849,7 +11764,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); out_free_ieee80211: - free_ieee80211(priv->net_dev, 0); + free_ieee80211(priv->net_dev); out: return err; } @@ -11916,7 +11831,7 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev) pci_release_regions(pdev); pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); - free_ieee80211(priv->net_dev, 0); + free_ieee80211(priv->net_dev); free_firmware(); } diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h index bf45391172f3..1e334ff6bd52 100644 --- a/drivers/net/wireless/ipw2x00/libipw.h +++ b/drivers/net/wireless/ipw2x00/libipw.h @@ -31,7 +31,6 @@ #include #include -#include #define LIBIPW_VERSION "git-1.1.13" @@ -784,15 +783,12 @@ struct libipw_geo { struct libipw_device { struct net_device *dev; - struct wireless_dev wdev; struct libipw_security sec; /* Bookkeeping structures */ struct libipw_stats ieee_stats; struct libipw_geo geo; - struct ieee80211_supported_band bg_band; - struct ieee80211_supported_band a_band; /* Probe / Beacon management */ struct list_head network_free_list; @@ -1018,8 +1014,8 @@ static inline int libipw_is_cck_rate(u8 rate) } /* ieee80211.c */ -extern void free_ieee80211(struct net_device *dev, int monitor); -extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor); +extern void free_ieee80211(struct net_device *dev); +extern struct net_device *alloc_ieee80211(int sizeof_priv); extern int libipw_change_mtu(struct net_device *dev, int new_mtu); extern void libipw_networks_age(struct libipw_device *ieee, diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c index a0e9f6aed7da..eb2b60834c17 100644 --- a/drivers/net/wireless/ipw2x00/libipw_module.c +++ b/drivers/net/wireless/ipw2x00/libipw_module.c @@ -62,9 +62,6 @@ MODULE_DESCRIPTION(DRV_DESCRIPTION); MODULE_AUTHOR(DRV_COPYRIGHT); MODULE_LICENSE("GPL"); -struct cfg80211_ops libipw_config_ops = { }; -void *libipw_wiphy_privid = &libipw_wiphy_privid; - static int libipw_networks_allocate(struct libipw_device *ieee) { if (ieee->networks) @@ -143,7 +140,7 @@ int libipw_change_mtu(struct net_device *dev, int new_mtu) } EXPORT_SYMBOL(libipw_change_mtu); -struct net_device *alloc_ieee80211(int sizeof_priv, int monitor) +struct net_device *alloc_ieee80211(int sizeof_priv) { struct libipw_device *ieee; struct net_device *dev; @@ -160,31 +157,10 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor) ieee->dev = dev; - if (!monitor) { - ieee->wdev.wiphy = wiphy_new(&libipw_config_ops, 0); - if (!ieee->wdev.wiphy) { - LIBIPW_ERROR("Unable to allocate wiphy.\n"); - goto failed_free_netdev; - } - - ieee->dev->ieee80211_ptr = &ieee->wdev; - ieee->wdev.iftype = NL80211_IFTYPE_STATION; - - /* Fill-out wiphy structure bits we know... Not enough info - here to call set_wiphy_dev or set MAC address or channel info - -- have to do that in ->ndo_init... */ - ieee->wdev.wiphy->privid = libipw_wiphy_privid; - - ieee->wdev.wiphy->max_scan_ssids = 1; - ieee->wdev.wiphy->max_scan_ie_len = 0; - ieee->wdev.wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) - | BIT(NL80211_IFTYPE_ADHOC); - } - err = libipw_networks_allocate(ieee); if (err) { LIBIPW_ERROR("Unable to allocate beacon storage: %d\n", err); - goto failed_free_wiphy; + goto failed_free_netdev; } libipw_networks_initialize(ieee); @@ -217,31 +193,19 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor) return dev; -failed_free_wiphy: - if (!monitor) - wiphy_free(ieee->wdev.wiphy); failed_free_netdev: free_netdev(dev); failed: return NULL; } -void free_ieee80211(struct net_device *dev, int monitor) +void free_ieee80211(struct net_device *dev) { struct libipw_device *ieee = netdev_priv(dev); lib80211_crypt_info_free(&ieee->crypt_info); libipw_networks_free(ieee); - - /* free cfg80211 resources */ - if (!monitor) { - wiphy_unregister(ieee->wdev.wiphy); - kfree(ieee->a_band.channels); - kfree(ieee->bg_band.channels); - wiphy_free(ieee->wdev.wiphy); - } - free_netdev(dev); } From 4a7bd3ec7aa305048b0e4791d056c52ac1f43ddf Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Sun, 8 Nov 2009 12:31:20 +0100 Subject: [PATCH 405/743] rt2x00: Update MAINTAINERS Add myself to the list of maintainers for the rt2x00 driver. Signed-off-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index b37e0cdd7632..223d6976c08c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4281,6 +4281,7 @@ F: drivers/video/aty/aty128fb.c RALINK RT2X00 WIRELESS LAN DRIVER P: rt2x00 project M: Ivo van Doorn +M: Gertjan van Wingerde L: linux-wireless@vger.kernel.org L: users@rt2x00.serialmonkey.com (moderated for non-subscribers) W: http://rt2x00.serialmonkey.com/ From 21d6c270f11c7d0ab5aafa48a6e79ba514f4e5e7 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 11 Nov 2009 18:02:29 -0600 Subject: [PATCH 406/743] p54usb: Remove DMA buffer from stack On 2.6.32-rc6 from wireless-testing, the following warning is emitted: ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:860 check_for_stack+0xaa/0xe0() Hardware name: HP Pavilion dv2700 Notebook PC ehci_hcd 0000:00:02.1: DMA-API: device driver maps memory fromstack [addr=ffff8800b6e2bca8] Modules linked in: Pid: 16378, comm: modprobe Not tainted 2.6.32-rc6-wl #244 Call Trace: [] warn_slowpath_common+0x78/0xb0 [] warn_slowpath_fmt+0x3c/0x40 [] check_for_stack+0xaa/0xe0 [] debug_dma_map_page+0xfd/0x170 [] usb_hcd_submit_urb+0x3da/0x9c0 [usbcore] [] ? lockdep_init_map+0x5f/0x5d0 [] usb_submit_urb+0xe5/0x260 [usbcore] [] usb_start_wait_urb+0x5e/0xf0 [usbcore] [] ? usb_init_urb+0x23/0x40 [usbcore] [] usb_bulk_msg+0xc4/0x150 [usbcore] [] T.719+0x31/0x40 [p54usb] [] p54u_upload_firmware_3887+0x2f/0x490 [p54usb] [] ? p54_parse_firmware+0x427/0x450 [p54common] ---[ end trace f77df0316ddad3de ]--- Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54usb.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 17e199546eeb..92af9b96bb7a 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -426,12 +426,16 @@ static const char p54u_romboot_3887[] = "~~~~"; static int p54u_firmware_reset_3887(struct ieee80211_hw *dev) { struct p54u_priv *priv = dev->priv; - u8 buf[4]; + u8 *buf; int ret; - memcpy(&buf, p54u_romboot_3887, sizeof(buf)); + buf = kmalloc(4, GFP_KERNEL); + if (!buf) + return -ENOMEM; + memcpy(buf, p54u_romboot_3887, 4); ret = p54u_bulk_msg(priv, P54U_PIPE_DATA, - buf, sizeof(buf)); + buf, 4); + kfree(buf); if (ret) dev_err(&priv->udev->dev, "(p54usb) unable to jump to " "boot ROM (%d)!\n", ret); From 505c92470bda486be589729514d3ed5302fb0551 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 12 Nov 2009 14:55:00 -0800 Subject: [PATCH 407/743] MAINTAINERS: RFKILL - Fix pattern entry missing colon Signed-off-by: Joe Perches Signed-off-by: John W. Linville --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 223d6976c08c..887b50b27cce 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4369,7 +4369,7 @@ RFKILL M: Johannes Berg L: linux-wireless@vger.kernel.org S: Maintained -F Documentation/rfkill.txt +F: Documentation/rfkill.txt F: net/rfkill/ RISCOM8 DRIVER From 1e360a60b24ad8f8685af66fa6de10ce46693a4b Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 13 Nov 2009 10:52:55 -0500 Subject: [PATCH 408/743] SUNRPC: Address buffer overrun in rpc_uaddr2sockaddr() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The size of buf[] must account for the string termination needed for the first strict_strtoul() call. Introduced in commit a02d6926. Fábio Olivé Leite points out that strict_strtoul() requires _either_ '\n\0' _or_ '\0' termination, so use the simpler '\0' here instead. See http://bugzilla.kernel.org/show_bug.cgi?id=14546 . Reported-by: argp@census-labs.com Signed-off-by: Chuck Lever Signed-off-by: Fábio Olivé Leite Signed-off-by: Trond Myklebust --- net/sunrpc/addr.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/net/sunrpc/addr.c b/net/sunrpc/addr.c index 22e8fd89477f..c7450c8f0a7c 100644 --- a/net/sunrpc/addr.c +++ b/net/sunrpc/addr.c @@ -306,24 +306,25 @@ EXPORT_SYMBOL_GPL(rpc_sockaddr2uaddr); * @sap: buffer into which to plant socket address * @salen: size of buffer * + * @uaddr does not have to be '\0'-terminated, but strict_strtoul() and + * rpc_pton() require proper string termination to be successful. + * * Returns the size of the socket address if successful; otherwise * zero is returned. */ size_t rpc_uaddr2sockaddr(const char *uaddr, const size_t uaddr_len, struct sockaddr *sap, const size_t salen) { - char *c, buf[RPCBIND_MAXUADDRLEN]; + char *c, buf[RPCBIND_MAXUADDRLEN + sizeof('\0')]; unsigned long portlo, porthi; unsigned short port; - if (uaddr_len > sizeof(buf)) + if (uaddr_len > RPCBIND_MAXUADDRLEN) return 0; memcpy(buf, uaddr, uaddr_len); - buf[uaddr_len] = '\n'; - buf[uaddr_len + 1] = '\0'; - + buf[uaddr_len] = '\0'; c = strrchr(buf, '.'); if (unlikely(c == NULL)) return 0; @@ -332,9 +333,7 @@ size_t rpc_uaddr2sockaddr(const char *uaddr, const size_t uaddr_len, if (unlikely(portlo > 255)) return 0; - c[0] = '\n'; - c[1] = '\0'; - + *c = '\0'; c = strrchr(buf, '.'); if (unlikely(c == NULL)) return 0; @@ -345,8 +344,7 @@ size_t rpc_uaddr2sockaddr(const char *uaddr, const size_t uaddr_len, port = (unsigned short)((porthi << 8) | portlo); - c[0] = '\0'; - + *c = '\0'; if (rpc_pton(buf, strlen(buf), sap, salen) == 0) return 0; From 7ab8f5244d6a8695688a91c8a3f6d3f40356ff97 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 2 Nov 2009 13:38:10 -0800 Subject: [PATCH 409/743] ocfs2: Refresh documentation Signed-off-by: Sunil Mushran Signed-off-by: Joel Becker --- Documentation/filesystems/ocfs2.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index c2a0871280a0..c58b9f5ba002 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -20,15 +20,16 @@ Lots of code taken from ext3 and other projects. Authors in alphabetical order: Joel Becker Zach Brown -Mark Fasheh +Mark Fasheh Kurt Hackel +Tao Ma Sunil Mushran Manish Singh +Tiger Yang Caveats ======= Features which OCFS2 does not support yet: - - quotas - Directory change notification (F_NOTIFY) - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease) @@ -70,7 +71,6 @@ commit=nrsec (*) Ocfs2 can be told to sync all its data and metadata performance. localalloc=8(*) Allows custom localalloc size in MB. If the value is too large, the fs will silently revert it to the default. - Localalloc is not enabled for local mounts. localflocks This disables cluster aware flock. inode64 Indicates that Ocfs2 is allowed to create inodes at any location in the filesystem, including those which From 7aee47b0bb9f93baecdbea205e878fe0f155f7da Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Fri, 6 Nov 2009 14:50:22 -0800 Subject: [PATCH 410/743] ocfs2: Trivial cleanup of jbd compatibility layer removal Mainline commit 53ef99cad9878f02f27bb30bc304fc42af8bdd6e removed the JBD compatibility layer from OCFS2. This patch removes the last remaining remnants of that. Signed-off-by: Sunil Mushran Signed-off-by: Joel Becker --- fs/ocfs2/ocfs2.h | 7 +------ fs/ocfs2/uptodate.c | 5 ----- 2 files changed, 1 insertion(+), 11 deletions(-) diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index eae404602424..d963d8638709 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -35,12 +35,7 @@ #include #include #include -#ifndef CONFIG_OCFS2_COMPAT_JBD -# include -#else -# include -# include "ocfs2_jbd_compat.h" -#endif +#include /* For union ocfs2_dlm_lksb */ #include "stackglue.h" diff --git a/fs/ocfs2/uptodate.c b/fs/ocfs2/uptodate.c index b6284f235d2f..c61369342a27 100644 --- a/fs/ocfs2/uptodate.c +++ b/fs/ocfs2/uptodate.c @@ -53,11 +53,6 @@ #include #include #include -#ifndef CONFIG_OCFS2_COMPAT_JBD -# include -#else -# include -#endif #define MLOG_MASK_PREFIX ML_UPTODATE From 409b95aff3583c05ac7a9247fa3d8c9aa7f9cae3 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 10 Nov 2009 08:57:34 +0000 Subject: [PATCH 411/743] sctp: Set source addresses on the association before adding transports Recent commit 8da645e101a8c20c6073efda3c7cc74eec01b87f sctp: Get rid of an extra routing lookup when adding a transport introduced a regression in the connection setup. The behavior was different between IPv4 and IPv6. IPv4 case ended up working because the route lookup routing returned a NULL route, which triggered another route lookup later in the output patch that succeeded. In the IPv6 case, a valid route was returned for first call, but we could not find a valid source address at the time since the source addresses were not set on the association yet. Thus resulted in a hung connection. The solution is to set the source addresses on the association prior to adding peers. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- include/net/sctp/structs.h | 2 +- net/sctp/associola.c | 4 +--- net/sctp/sm_statefuns.c | 15 +++++++++------ net/sctp/socket.c | 22 ++++++++++++---------- 4 files changed, 23 insertions(+), 20 deletions(-) diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 6e5f0e0c7967..cd2e18778f81 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -1980,7 +1980,7 @@ void sctp_assoc_set_primary(struct sctp_association *, void sctp_assoc_del_nonprimary_peers(struct sctp_association *, struct sctp_transport *); int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *, - gfp_t); + sctp_scope_t, gfp_t); int sctp_assoc_set_bind_addr_from_cookie(struct sctp_association *, struct sctp_cookie*, gfp_t gfp); diff --git a/net/sctp/associola.c b/net/sctp/associola.c index 8450960df24f..7eed77a39d0d 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -1485,15 +1485,13 @@ void sctp_assoc_rwnd_decrease(struct sctp_association *asoc, unsigned len) * local endpoint and the remote peer. */ int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *asoc, - gfp_t gfp) + sctp_scope_t scope, gfp_t gfp) { - sctp_scope_t scope; int flags; /* Use scoping rules to determine the subset of addresses from * the endpoint. */ - scope = sctp_scope(&asoc->peer.active_path->ipaddr); flags = (PF_INET6 == asoc->base.sk->sk_family) ? SCTP_ADDR6_ALLOWED : 0; if (asoc->peer.ipv4_address) flags |= SCTP_ADDR4_PEERSUPP; diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index c8fae1983dd1..d4df45022ffa 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -384,6 +384,11 @@ sctp_disposition_t sctp_sf_do_5_1B_init(const struct sctp_endpoint *ep, if (!new_asoc) goto nomem; + if (sctp_assoc_set_bind_addr_from_ep(new_asoc, + sctp_scope(sctp_source(chunk)), + GFP_ATOMIC) < 0) + goto nomem_init; + /* The call, sctp_process_init(), can fail on memory allocation. */ if (!sctp_process_init(new_asoc, chunk->chunk_hdr->type, sctp_source(chunk), @@ -401,9 +406,6 @@ sctp_disposition_t sctp_sf_do_5_1B_init(const struct sctp_endpoint *ep, len = ntohs(err_chunk->chunk_hdr->length) - sizeof(sctp_chunkhdr_t); - if (sctp_assoc_set_bind_addr_from_ep(new_asoc, GFP_ATOMIC) < 0) - goto nomem_init; - repl = sctp_make_init_ack(new_asoc, chunk, GFP_ATOMIC, len); if (!repl) goto nomem_init; @@ -1452,6 +1454,10 @@ static sctp_disposition_t sctp_sf_do_unexpected_init( if (!new_asoc) goto nomem; + if (sctp_assoc_set_bind_addr_from_ep(new_asoc, + sctp_scope(sctp_source(chunk)), GFP_ATOMIC) < 0) + goto nomem; + /* In the outbound INIT ACK the endpoint MUST copy its current * Verification Tag and Peers Verification tag into a reserved * place (local tie-tag and per tie-tag) within the state cookie. @@ -1488,9 +1494,6 @@ static sctp_disposition_t sctp_sf_do_unexpected_init( sizeof(sctp_chunkhdr_t); } - if (sctp_assoc_set_bind_addr_from_ep(new_asoc, GFP_ATOMIC) < 0) - goto nomem; - repl = sctp_make_init_ack(new_asoc, chunk, GFP_ATOMIC, len); if (!repl) goto nomem; diff --git a/net/sctp/socket.c b/net/sctp/socket.c index c8d05758661d..bf705ba97231 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1080,6 +1080,13 @@ static int __sctp_connect(struct sock* sk, err = -ENOMEM; goto out_free; } + + err = sctp_assoc_set_bind_addr_from_ep(asoc, scope, + GFP_KERNEL); + if (err < 0) { + goto out_free; + } + } /* Prime the peer's transport structures. */ @@ -1095,11 +1102,6 @@ static int __sctp_connect(struct sock* sk, walk_size += af->sockaddr_len; } - err = sctp_assoc_set_bind_addr_from_ep(asoc, GFP_KERNEL); - if (err < 0) { - goto out_free; - } - /* In case the user of sctp_connectx() wants an association * id back, assign one now. */ @@ -1689,6 +1691,11 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk, goto out_unlock; } asoc = new_asoc; + err = sctp_assoc_set_bind_addr_from_ep(asoc, scope, GFP_KERNEL); + if (err < 0) { + err = -ENOMEM; + goto out_free; + } /* If the SCTP_INIT ancillary data is specified, set all * the association init values accordingly. @@ -1718,11 +1725,6 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk, err = -ENOMEM; goto out_free; } - err = sctp_assoc_set_bind_addr_from_ep(asoc, GFP_KERNEL); - if (err < 0) { - err = -ENOMEM; - goto out_free; - } } /* ASSERT: we have a valid association at this point. */ From f9c67811ebc00a42f62f5d542d3abd36bd49ae35 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 11 Nov 2009 08:19:24 +0000 Subject: [PATCH 412/743] sctp: Fix regression introduced by new sctp_connectx api A new (unrealeased to the user) sctp_connectx api c6ba68a26645dbc5029a9faa5687ebe6fcfc53e4 sctp: support non-blocking version of the new sctp_connectx() API introduced a regression cought by the user regression test suite. In particular, the API requires the user library to re-allocate the buffer and could potentially trigger a SIGFAULT. This change corrects that regression by passing the original address buffer to the kernel unmodified, but still allows for a returned association id. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/socket.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index bf705ba97231..3a95fcb17a9e 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1276,22 +1276,30 @@ SCTP_STATIC int sctp_setsockopt_connectx(struct sock* sk, } /* - * New (hopefully final) interface for the API. The option buffer is used - * both for the returned association id and the addresses. + * New (hopefully final) interface for the API. + * We use the sctp_getaddrs_old structure so that use-space library + * can avoid any unnecessary allocations. The only defferent part + * is that we store the actual length of the address buffer into the + * addrs_num structure member. That way we can re-use the existing + * code. */ SCTP_STATIC int sctp_getsockopt_connectx3(struct sock* sk, int len, char __user *optval, int __user *optlen) { + struct sctp_getaddrs_old param; sctp_assoc_t assoc_id = 0; int err = 0; - if (len < sizeof(assoc_id)) + if (len < sizeof(param)) return -EINVAL; + if (copy_from_user(¶m, optval, sizeof(param))) + return -EFAULT; + err = __sctp_setsockopt_connectx(sk, - (struct sockaddr __user *)(optval + sizeof(assoc_id)), - len - sizeof(assoc_id), &assoc_id); + (struct sockaddr __user *)param.addrs, + param.addr_num, &assoc_id); if (err == 0 || err == -EINPROGRESS) { if (copy_to_user(optval, &assoc_id, sizeof(assoc_id))) From a78102e74e782914039cd8a6939532649825a2e3 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 11 Nov 2009 11:54:37 +0000 Subject: [PATCH 413/743] sctp: Set socket source address when additing first transport Recent commits sctp: Get rid of an extra routing lookup when adding a transport and sctp: Set source addresses on the association before adding transports changed when routes are added to the sctp transports. As such, we didn't set the socket source address correctly when adding the first transport. The first transport is always the primary/active one, so when adding it, set the socket source address. This was causing regression failures in SCTP tests. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/transport.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/sctp/transport.c b/net/sctp/transport.c index c256e4839316..3b141bb32faf 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -308,7 +308,8 @@ void sctp_transport_route(struct sctp_transport *transport, /* Initialize sk->sk_rcv_saddr, if the transport is the * association's active path for getsockname(). */ - if (asoc && (transport == asoc->peer.active_path)) + if (asoc && (!asoc->peer.primary_path || + (transport == asoc->peer.active_path))) opt->pf->af->to_sk_saddr(&transport->saddr, asoc->base.sk); } else From b8a623bf836ccfab09a5a6daf62116f455082e6e Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Tue, 10 Nov 2009 09:44:23 +0000 Subject: [PATCH 414/743] s2io: fixing a ethtool test that is broken Due commit 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff, it is not more possible to pci_restore_state() more than once without calling pci_save_state() in the middle. Actually running a ethtool test on s2io makes the card inactive, and it needs to unload/reload the module to fix. This patch just save the state just after it restore in order to keep the old behaviour Signed-off-by: Breno Leitao Signed-off-by: David S. Miller --- drivers/net/s2io.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index ddccf5fa56b6..0dd7839322bc 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3494,6 +3494,7 @@ static void s2io_reset(struct s2io_nic *sp) /* Restore the PCI state saved during initialization. */ pci_restore_state(sp->pdev); + pci_save_state(sp->pdev); pci_read_config_word(sp->pdev, 0x2, &val16); if (check_pci_device_id(val16) != (u16)PCI_ANY_ID) break; From d0490cfdf440fded2c292cfb8bb9272fc9ef6943 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 11 Nov 2009 02:03:54 +0000 Subject: [PATCH 415/743] ipmr: missing dev_put() on error path in vif_add() The other error paths in front of this one have a dev_put() but this one got missed. Found by smatch static checker. Signed-off-by: Dan Carpenter Acked-by: Wang Chen Signed-off-by: David S. Miller --- net/ipv4/ipmr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index 630a56df7b47..99508d66a642 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -483,8 +483,10 @@ static int vif_add(struct net *net, struct vifctl *vifc, int mrtsock) return -EINVAL; } - if ((in_dev = __in_dev_get_rtnl(dev)) == NULL) + if ((in_dev = __in_dev_get_rtnl(dev)) == NULL) { + dev_put(dev); return -EADDRNOTAVAIL; + } IPV4_DEVCONF(in_dev->cnf, MC_FORWARDING)++; ip_rt_multicast_event(in_dev); From b93cf3f0bb45560d2ce62bdcc2181c40660cfdbf Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Thu, 12 Nov 2009 01:35:01 +0000 Subject: [PATCH 416/743] can: Fix driver Kconfig structure In 2.6.32-rc the new EMS USB CAN driver was contributed and added the Kconfig entry right behind an entry of the same *vendor*. This teared the SJA1000 based driver selection into pieces. This fix cleans up the 2.6.32-rc Kconfig files for the CAN drivers and moves the SJA1000 and USB Kconfig portions into the belonging directories. As there are many new CAN drivers in the queue getting this cleanup into 2.6.32-rc would massively reduce the problems for the upcoming drivers. Thanks, Oliver Signed-off-by: Oliver Hartkopp Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/Kconfig | 60 +++------------------------------ drivers/net/can/sja1000/Kconfig | 47 ++++++++++++++++++++++++++ drivers/net/can/usb/Kconfig | 10 ++++++ drivers/net/can/usb/Makefile | 2 ++ 4 files changed, 64 insertions(+), 55 deletions(-) create mode 100644 drivers/net/can/sja1000/Kconfig create mode 100644 drivers/net/can/usb/Kconfig diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index df32c109b7ac..772f6d2489ce 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -35,66 +35,16 @@ config CAN_CALC_BITTIMING arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw". If unsure, say Y. -config CAN_SJA1000 - depends on CAN_DEV && HAS_IOMEM - tristate "Philips SJA1000" - ---help--- - Driver for the SJA1000 CAN controllers from Philips or NXP - -config CAN_SJA1000_ISA - depends on CAN_SJA1000 && ISA - tristate "ISA Bus based legacy SJA1000 driver" - ---help--- - This driver adds legacy support for SJA1000 chips connected to - the ISA bus using I/O port, memory mapped or indirect access. - -config CAN_SJA1000_PLATFORM - depends on CAN_SJA1000 - tristate "Generic Platform Bus based SJA1000 driver" - ---help--- - This driver adds support for the SJA1000 chips connected to - the "platform bus" (Linux abstraction for directly to the - processor attached devices). Which can be found on various - boards from Phytec (http://www.phytec.de) like the PCM027, - PCM038. - -config CAN_SJA1000_OF_PLATFORM - depends on CAN_SJA1000 && PPC_OF - tristate "Generic OF Platform Bus based SJA1000 driver" - ---help--- - This driver adds support for the SJA1000 chips connected to - the OpenFirmware "platform bus" found on embedded systems with - OpenFirmware bindings, e.g. if you have a PowerPC based system - you may want to enable this option. - -config CAN_EMS_PCI - tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" - depends on PCI && CAN_SJA1000 - ---help--- - This driver is for the one, two or four channel CPC-PCI, - CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche - (http://www.ems-wuensche.de). - -config CAN_EMS_USB - tristate "EMS CPC-USB/ARM7 CAN/USB interface" - depends on USB && CAN_DEV - ---help--- - This driver is for the one channel CPC-USB/ARM7 CAN/USB interface - from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). - -config CAN_KVASER_PCI - tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" - depends on PCI && CAN_SJA1000 - ---help--- - This driver is for the the PCIcanx and PCIcan cards (1, 2 or - 4 channel) from Kvaser (http://www.kvaser.com). - config CAN_AT91 tristate "Atmel AT91 onchip CAN controller" - depends on CAN && CAN_DEV && ARCH_AT91SAM9263 + depends on CAN_DEV && ARCH_AT91SAM9263 ---help--- This is a driver for the SoC CAN controller in Atmel's AT91SAM9263. +source "drivers/net/can/sja1000/Kconfig" + +source "drivers/net/can/usb/Kconfig" + config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" depends on CAN diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig new file mode 100644 index 000000000000..4c674927f247 --- /dev/null +++ b/drivers/net/can/sja1000/Kconfig @@ -0,0 +1,47 @@ +menuconfig CAN_SJA1000 + tristate "Philips/NXP SJA1000 devices" + depends on CAN_DEV && HAS_IOMEM + +if CAN_SJA1000 + +config CAN_SJA1000_ISA + tristate "ISA Bus based legacy SJA1000 driver" + depends on ISA + ---help--- + This driver adds legacy support for SJA1000 chips connected to + the ISA bus using I/O port, memory mapped or indirect access. + +config CAN_SJA1000_PLATFORM + tristate "Generic Platform Bus based SJA1000 driver" + ---help--- + This driver adds support for the SJA1000 chips connected to + the "platform bus" (Linux abstraction for directly to the + processor attached devices). Which can be found on various + boards from Phytec (http://www.phytec.de) like the PCM027, + PCM038. + +config CAN_SJA1000_OF_PLATFORM + tristate "Generic OF Platform Bus based SJA1000 driver" + depends on PPC_OF + ---help--- + This driver adds support for the SJA1000 chips connected to + the OpenFirmware "platform bus" found on embedded systems with + OpenFirmware bindings, e.g. if you have a PowerPC based system + you may want to enable this option. + +config CAN_EMS_PCI + tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" + depends on PCI + ---help--- + This driver is for the one, two or four channel CPC-PCI, + CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche + (http://www.ems-wuensche.de). + +config CAN_KVASER_PCI + tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" + depends on PCI + ---help--- + This driver is for the the PCIcanx and PCIcan cards (1, 2 or + 4 channel) from Kvaser (http://www.kvaser.com). + +endif diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig new file mode 100644 index 000000000000..bbc78e0b8a15 --- /dev/null +++ b/drivers/net/can/usb/Kconfig @@ -0,0 +1,10 @@ +menu "CAN USB interfaces" + depends on USB && CAN_DEV + +config CAN_EMS_USB + tristate "EMS CPC-USB/ARM7 CAN/USB interface" + ---help--- + This driver is for the one channel CPC-USB/ARM7 CAN/USB interface + from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). + +endmenu diff --git a/drivers/net/can/usb/Makefile b/drivers/net/can/usb/Makefile index c3f75ba701b1..0afd51d4c7a5 100644 --- a/drivers/net/can/usb/Makefile +++ b/drivers/net/can/usb/Makefile @@ -3,3 +3,5 @@ # obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o + +ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG From 55369c0a6441e95062cfaeef6eefcfb357a31e8c Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Thu, 12 Nov 2009 05:34:05 +0000 Subject: [PATCH 417/743] can: add the missing netlink get_xstats_size callback This patch adds the missing "get_xstats_size" callback for the netlink interface, which is required if "fill_xstats" is used, as pointed out by Patrick McHardy. Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/dev.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 564e31c9fee4..2868fe842a41 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -629,6 +629,11 @@ nla_put_failure: return -EMSGSIZE; } +static size_t can_get_xstats_size(const struct net_device *dev) +{ + return sizeof(struct can_device_stats); +} + static int can_fill_xstats(struct sk_buff *skb, const struct net_device *dev) { struct can_priv *priv = netdev_priv(dev); @@ -657,6 +662,7 @@ static struct rtnl_link_ops can_link_ops __read_mostly = { .changelink = can_changelink, .get_size = can_get_size, .fill_info = can_fill_info, + .get_xstats_size = can_get_xstats_size, .fill_xstats = can_fill_xstats, }; From 8812304cf1110ae16b0778680f6022216cf4716a Mon Sep 17 00:00:00 2001 From: Raimonds Cicans Date: Fri, 13 Nov 2009 10:52:19 +0000 Subject: [PATCH 418/743] r8169: Fix receive buffer length when MTU is between 1515 and 1536 In r8169 driver MTU is used to calculate receive buffer size. Receive buffer size is used to configure hardware incoming packet filter. For jumbo frames: Receive buffer size = Max frame size = MTU + 14 (ethernet header) + 4 (vlan header) + 4 (ethernet checksum) = MTU + 22 Bug: driver for all MTU up to 1536 use receive buffer size 1536 As you can see from formula, this mean all IP packets > 1536 - 22 (for vlan tagged, 1536 - 18 for not tagged) are dropped by hardware filter. Example: host_good> ifconfig eth0 mtu 1536 host_r8169> ifconfig eth0 mtu 1536 host_good> ping host_r8169 Ok host_good> ping -s 1500 host_r8169 Fail host_good> ifconfig eth0 mtu 7000 host_r8169> ifconfig eth0 mtu 7000 host_good> ping -s 1500 host_r8169 Ok Bonus: got rid of magic number 8 Signed-off-by: Raimonds Cicans Signed-off-by: David S. Miller --- drivers/net/r8169.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index fa4935678488..b9221bdc7184 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3243,9 +3243,9 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev) static void rtl8169_set_rxbufsize(struct rtl8169_private *tp, struct net_device *dev) { - unsigned int mtu = dev->mtu; + unsigned int max_frame = dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; - tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE; + tp->rx_buf_sz = (max_frame > RX_BUF_SIZE) ? max_frame : RX_BUF_SIZE; } static int rtl8169_open(struct net_device *dev) From 5e08fe570c2dbabb5015c37049eb9a451e55c890 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 14 Nov 2009 14:37:19 +0100 Subject: [PATCH 419/743] ALSA: ice1724 - Fix section mismatch in prodigy_hd2_resume() Remove invlid __devinit prefix from the suspend callback. Signed-off-by: Takashi Iwai --- sound/pci/ice1712/prodigy_hifi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/ice1712/prodigy_hifi.c b/sound/pci/ice1712/prodigy_hifi.c index c75515f5be6f..6a9fee3ee78f 100644 --- a/sound/pci/ice1712/prodigy_hifi.c +++ b/sound/pci/ice1712/prodigy_hifi.c @@ -1100,7 +1100,7 @@ static void ak4396_init(struct snd_ice1712 *ice) } #ifdef CONFIG_PM -static int __devinit prodigy_hd2_resume(struct snd_ice1712 *ice) +static int prodigy_hd2_resume(struct snd_ice1712 *ice) { /* initialize ak4396 codec and restore previous mixer volumes */ struct prodigy_hifi_spec *spec = ice->spec; From 479c2553af9a176a0613894b9f1ec73425fd56a3 Mon Sep 17 00:00:00 2001 From: Petr Vandrovec Date: Sat, 14 Nov 2009 10:47:07 +0100 Subject: [PATCH 420/743] Fix memory corruption caused by nfsd readdir+ Commit 8177e6d6dfb9cd03d9bdeb647c32161f8f58f686 ("nfsd: clean up readdirplus encoding") introduced single character typo in nfs3 readdir+ implementation. Unfortunately that typo has quite bad side effects: random memory corruption, followed (on my box) with immediate spontaneous box reboot. Using 'p1' instead of 'p' fixes my Linux box rebooting whenever VMware ESXi box tries to list contents of my home directory. Signed-off-by: Petr Vandrovec Cc: "J. Bruce Fields" Cc: Neil Brown Signed-off-by: Linus Torvalds --- fs/nfsd/nfs3xdr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfsd/nfs3xdr.c b/fs/nfsd/nfs3xdr.c index edf926e1062f..d0a2ce1b4324 100644 --- a/fs/nfsd/nfs3xdr.c +++ b/fs/nfsd/nfs3xdr.c @@ -958,7 +958,7 @@ encode_entry(struct readdir_cd *ccd, const char *name, int namlen, p1 = encode_entry_baggage(cd, p1, name, namlen, ino); if (plus) - p = encode_entryplus_baggage(cd, p1, name, namlen); + p1 = encode_entryplus_baggage(cd, p1, name, namlen); /* determine entry word length and lengths to go in pages */ num_entry_words = p1 - tmp; From 7b8e2c1db0f358bc389dd1ee4633a92d80a5a6d0 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 13 Nov 2009 14:26:23 +0100 Subject: [PATCH 421/743] fix memory leak in fixed btusb_close If the waker is killed before it can replay outstanding URBs, these URBs won't be freed or will be replayed at the next open. This patch closes the window by explicitely discarding outstanding URBs. Signed-off-by: Oliver Neukum Acked-by: Marcel Holtmann Signed-off-by: Linus Torvalds --- drivers/bluetooth/btusb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 2fb38027f3bb..44bc8bbabf54 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -600,11 +600,13 @@ static int btusb_close(struct hci_dev *hdev) btusb_stop_traffic(data); err = usb_autopm_get_interface(data->intf); if (err < 0) - return 0; + goto failed; data->intf->needs_remote_wakeup = 0; usb_autopm_put_interface(data->intf); +failed: + usb_scuttle_anchored_urbs(&data->deferred); return 0; } From 1a7af63108f07637504300671a72432c34e10021 Mon Sep 17 00:00:00 2001 From: Jiro SEKIBA Date: Sun, 15 Nov 2009 13:49:44 +0900 Subject: [PATCH 422/743] nilfs2: deleted struct nilfs_dat_group_desc struct nilfs_dat_group_desc is not used both in kernel and user spaces. struct nilfs_palloc_group_desc is used instead. Signed-off-by: Jiro SEKIBA Signed-off-by: Ryusuke Konishi --- include/linux/nilfs2_fs.h | 9 --------- 1 file changed, 9 deletions(-) diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index 79fec6af3f9f..ce520402e840 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -424,15 +424,6 @@ struct nilfs_dat_entry { __le64 de_rsv; }; -/** - * struct nilfs_dat_group_desc - block group descriptor - * @dg_nfrees: number of free virtual block numbers in block group - */ -struct nilfs_dat_group_desc { - __le32 dg_nfrees; -}; - - /** * struct nilfs_snapshot_list - snapshot list * @ssl_next: next checkpoint number on snapshot list From 18dafac1a4c6c88867a50f9a82492976f20383d6 Mon Sep 17 00:00:00 2001 From: Jiro SEKIBA Date: Sun, 15 Nov 2009 13:49:45 +0900 Subject: [PATCH 423/743] nilfs2: deleted inconsistent comment in nilfs_load_inode_block() The comment says, "Caller of this function MUST lock s_inode_lock", however just above the comment, it locks s_inode_lock in the function. Signed-off-by: Jiro SEKIBA Signed-off-by: Ryusuke Konishi --- fs/nilfs2/inode.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c index 5040220c3732..2a0a5a3ac134 100644 --- a/fs/nilfs2/inode.c +++ b/fs/nilfs2/inode.c @@ -664,7 +664,6 @@ int nilfs_load_inode_block(struct nilfs_sb_info *sbi, struct inode *inode, int err; spin_lock(&sbi->s_inode_lock); - /* Caller of this function MUST lock s_inode_lock */ if (ii->i_bh == NULL) { spin_unlock(&sbi->s_inode_lock); err = nilfs_ifile_get_inode_block(sbi->s_ifile, inode->i_ino, From 8ef5837a47f73faee18fa7ce2f9a9eb7675be8de Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Sat, 14 Nov 2009 18:20:04 +0000 Subject: [PATCH 424/743] ALSA: hda - Dell Studio 1557 hd-audio quirk Add the Dell Studio 15 (model 1557, Core i7) laptop to the hd-audio quirk list, enabling audio. Signed-off-by: Daniel J Blueman Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 8eb6508cd991..86de305fc9f2 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1590,6 +1590,8 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { "Dell Studio 17", STAC_DELL_M6_DMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02be, "Dell Studio 1555", STAC_DELL_M6_DMIC), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02bd, + "Dell Studio 1557", STAC_DELL_M6_DMIC), {} /* terminator */ }; From 65166571800af0f63f21e5576d7db12d2bf73790 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Thu, 15 Oct 2009 12:13:36 -0700 Subject: [PATCH 425/743] kconfig: Mark various internal functions static kconfig's keyword hash, lexer, and parser define various functions used only locally. Declare these functions as static, and regenerate the corresponding generated files. Signed-off-by: Josh Triplett --- scripts/kconfig/lex.zconf.c_shipped | 25 +++++++++++++++++++------ scripts/kconfig/zconf.gperf | 2 ++ scripts/kconfig/zconf.hash.c_shipped | 2 ++ scripts/kconfig/zconf.l | 6 +++--- scripts/kconfig/zconf.tab.c_shipped | 6 +++--- scripts/kconfig/zconf.y | 6 +++--- 6 files changed, 32 insertions(+), 15 deletions(-) diff --git a/scripts/kconfig/lex.zconf.c_shipped b/scripts/kconfig/lex.zconf.c_shipped index dc3e81807d13..fdc7113b08d1 100644 --- a/scripts/kconfig/lex.zconf.c_shipped +++ b/scripts/kconfig/lex.zconf.c_shipped @@ -160,7 +160,15 @@ typedef unsigned int flex_uint32_t; /* Size of default input buffer. */ #ifndef YY_BUF_SIZE +#ifdef __ia64__ +/* On IA-64, the buffer size is 16k, not 8k. + * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. + * Ditto for the __ia64__ case accordingly. + */ +#define YY_BUF_SIZE 32768 +#else #define YY_BUF_SIZE 16384 +#endif /* __ia64__ */ #endif /* The state buf must be large enough to hold one state per character in the main buffer. @@ -802,7 +810,7 @@ static int last_ts, first_ts; static void zconf_endhelp(void); static void zconf_endfile(void); -void new_string(void) +static void new_string(void) { text = malloc(START_STRSIZE); text_asize = START_STRSIZE; @@ -810,7 +818,7 @@ void new_string(void) *text = 0; } -void append_string(const char *str, int size) +static void append_string(const char *str, int size) { int new_size = text_size + size + 1; if (new_size > text_asize) { @@ -824,7 +832,7 @@ void append_string(const char *str, int size) text[text_size] = 0; } -void alloc_string(const char *str, int size) +static void alloc_string(const char *str, int size) { text = malloc(size + 1); memcpy(text, str, size); @@ -914,7 +922,12 @@ static int input (void ); /* Amount of stuff to slurp up with each read. */ #ifndef YY_READ_BUF_SIZE +#ifdef __ia64__ +/* On IA-64, the buffer size is 16k, not 8k */ +#define YY_READ_BUF_SIZE 16384 +#else #define YY_READ_BUF_SIZE 8192 +#endif /* __ia64__ */ #endif /* Copy whatever the last rule matched to the standard output. */ @@ -922,7 +935,7 @@ static int input (void ); /* This used to be an fputs(), but since the string might contain NUL's, * we now use fwrite(). */ -#define ECHO fwrite( zconftext, zconfleng, 1, zconfout ) +#define ECHO do { if (fwrite( zconftext, zconfleng, 1, zconfout )) {} } while (0) #endif /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, @@ -2060,8 +2073,8 @@ YY_BUFFER_STATE zconf_scan_string (yyconst char * yystr ) /** Setup the input buffer state to scan the given bytes. The next call to zconflex() will * scan from a @e copy of @a bytes. - * @param bytes the byte buffer to scan - * @param len the number of bytes in the buffer pointed to by @a bytes. + * @param yybytes the byte buffer to scan + * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. * * @return the newly allocated buffer state object. */ diff --git a/scripts/kconfig/zconf.gperf b/scripts/kconfig/zconf.gperf index 25ef5d01c0af..d8bc74249622 100644 --- a/scripts/kconfig/zconf.gperf +++ b/scripts/kconfig/zconf.gperf @@ -9,6 +9,8 @@ struct kconf_id; +static struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len); + %% mainmenu, T_MAINMENU, TF_COMMAND menu, T_MENU, TF_COMMAND diff --git a/scripts/kconfig/zconf.hash.c_shipped b/scripts/kconfig/zconf.hash.c_shipped index 5c73d51339d8..c1748faf4634 100644 --- a/scripts/kconfig/zconf.hash.c_shipped +++ b/scripts/kconfig/zconf.hash.c_shipped @@ -30,6 +30,8 @@ #endif struct kconf_id; + +static struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len); /* maximum key range = 47, duplicates = 0 */ #ifdef __GNUC__ diff --git a/scripts/kconfig/zconf.l b/scripts/kconfig/zconf.l index 21ff69c9ad4e..d8f7236cb0a3 100644 --- a/scripts/kconfig/zconf.l +++ b/scripts/kconfig/zconf.l @@ -39,7 +39,7 @@ static int last_ts, first_ts; static void zconf_endhelp(void); static void zconf_endfile(void); -void new_string(void) +static void new_string(void) { text = malloc(START_STRSIZE); text_asize = START_STRSIZE; @@ -47,7 +47,7 @@ void new_string(void) *text = 0; } -void append_string(const char *str, int size) +static void append_string(const char *str, int size) { int new_size = text_size + size + 1; if (new_size > text_asize) { @@ -61,7 +61,7 @@ void append_string(const char *str, int size) text[text_size] = 0; } -void alloc_string(const char *str, int size) +static void alloc_string(const char *str, int size) { text = malloc(size + 1); memcpy(text, str, size); diff --git a/scripts/kconfig/zconf.tab.c_shipped b/scripts/kconfig/zconf.tab.c_shipped index c42b439c5cc0..6e9dcd59aa87 100644 --- a/scripts/kconfig/zconf.tab.c_shipped +++ b/scripts/kconfig/zconf.tab.c_shipped @@ -2249,7 +2249,7 @@ void conf_parse(const char *name) sym_set_change_count(1); } -const char *zconf_tokenname(int token) +static const char *zconf_tokenname(int token) { switch (token) { case T_MENU: return "menu"; @@ -2313,7 +2313,7 @@ static void zconferror(const char *err) #endif } -void print_quoted_string(FILE *out, const char *str) +static void print_quoted_string(FILE *out, const char *str) { const char *p; int len; @@ -2330,7 +2330,7 @@ void print_quoted_string(FILE *out, const char *str) putc('"', out); } -void print_symbol(FILE *out, struct menu *menu) +static void print_symbol(FILE *out, struct menu *menu) { struct symbol *sym = menu->sym; struct property *prop; diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y index 01ec550ec01b..8c43491f8cc9 100644 --- a/scripts/kconfig/zconf.y +++ b/scripts/kconfig/zconf.y @@ -504,7 +504,7 @@ void conf_parse(const char *name) sym_set_change_count(1); } -const char *zconf_tokenname(int token) +static const char *zconf_tokenname(int token) { switch (token) { case T_MENU: return "menu"; @@ -568,7 +568,7 @@ static void zconferror(const char *err) #endif } -void print_quoted_string(FILE *out, const char *str) +static void print_quoted_string(FILE *out, const char *str) { const char *p; int len; @@ -585,7 +585,7 @@ void print_quoted_string(FILE *out, const char *str) putc('"', out); } -void print_symbol(FILE *out, struct menu *menu) +static void print_symbol(FILE *out, struct menu *menu) { struct symbol *sym = menu->sym; struct property *prop; From ed9df091491dd41d4e054071948c8e2e5b354c99 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Thu, 15 Oct 2009 12:58:40 -0700 Subject: [PATCH 426/743] genksyms: Mark is_reserved_word static The genksyms keyword gperf hash provides a function is_reserved_word. genksyms #includes the resulting generated file keywords.c, so the function gets used only in the same source file that defines it. Mark is_reserved_word static, and regenerate the corresponding generated file. Signed-off-by: Josh Triplett --- scripts/genksyms/keywords.c_shipped | 97 +++++++++++++++-------------- scripts/genksyms/keywords.gperf | 2 + 2 files changed, 53 insertions(+), 46 deletions(-) diff --git a/scripts/genksyms/keywords.c_shipped b/scripts/genksyms/keywords.c_shipped index 971e0113ae7a..287467a2e8c7 100644 --- a/scripts/genksyms/keywords.c_shipped +++ b/scripts/genksyms/keywords.c_shipped @@ -1,4 +1,4 @@ -/* ANSI-C code produced by gperf version 3.0.2 */ +/* ANSI-C code produced by gperf version 3.0.3 */ /* Command-line: gperf -L ANSI-C -a -C -E -g -H is_reserved_hash -k '1,3,$' -N is_reserved_word -p -t scripts/genksyms/keywords.gperf */ #if !((' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \ @@ -30,7 +30,9 @@ #line 1 "scripts/genksyms/keywords.gperf" -#line 3 "scripts/genksyms/keywords.gperf" +struct resword; +static const struct resword *is_reserved_word(register const char *str, register unsigned int len); +#line 5 "scripts/genksyms/keywords.gperf" struct resword { const char *name; int token; }; /* maximum key range = 62, duplicates = 0 */ @@ -78,6 +80,9 @@ is_reserved_hash (register const char *str, register unsigned int len) #ifdef __GNUC__ __inline +#ifdef __GNUC_STDC_INLINE__ +__attribute__ ((__gnu_inline__)) +#endif #endif const struct resword * is_reserved_word (register const char *str, register unsigned int len) @@ -94,105 +99,105 @@ is_reserved_word (register const char *str, register unsigned int len) static const struct resword wordlist[] = { {""}, {""}, {""}, -#line 26 "scripts/genksyms/keywords.gperf" +#line 28 "scripts/genksyms/keywords.gperf" {"asm", ASM_KEYW}, {""}, -#line 8 "scripts/genksyms/keywords.gperf" +#line 10 "scripts/genksyms/keywords.gperf" {"__asm", ASM_KEYW}, {""}, -#line 9 "scripts/genksyms/keywords.gperf" +#line 11 "scripts/genksyms/keywords.gperf" {"__asm__", ASM_KEYW}, {""}, {""}, -#line 52 "scripts/genksyms/keywords.gperf" +#line 54 "scripts/genksyms/keywords.gperf" {"__typeof__", TYPEOF_KEYW}, {""}, -#line 12 "scripts/genksyms/keywords.gperf" +#line 14 "scripts/genksyms/keywords.gperf" {"__const", CONST_KEYW}, -#line 11 "scripts/genksyms/keywords.gperf" - {"__attribute__", ATTRIBUTE_KEYW}, #line 13 "scripts/genksyms/keywords.gperf" + {"__attribute__", ATTRIBUTE_KEYW}, +#line 15 "scripts/genksyms/keywords.gperf" {"__const__", CONST_KEYW}, -#line 18 "scripts/genksyms/keywords.gperf" - {"__signed__", SIGNED_KEYW}, -#line 44 "scripts/genksyms/keywords.gperf" - {"static", STATIC_KEYW}, #line 20 "scripts/genksyms/keywords.gperf" + {"__signed__", SIGNED_KEYW}, +#line 46 "scripts/genksyms/keywords.gperf" + {"static", STATIC_KEYW}, +#line 22 "scripts/genksyms/keywords.gperf" {"__volatile__", VOLATILE_KEYW}, -#line 39 "scripts/genksyms/keywords.gperf" +#line 41 "scripts/genksyms/keywords.gperf" {"int", INT_KEYW}, -#line 32 "scripts/genksyms/keywords.gperf" +#line 34 "scripts/genksyms/keywords.gperf" {"char", CHAR_KEYW}, -#line 33 "scripts/genksyms/keywords.gperf" +#line 35 "scripts/genksyms/keywords.gperf" {"const", CONST_KEYW}, -#line 45 "scripts/genksyms/keywords.gperf" +#line 47 "scripts/genksyms/keywords.gperf" {"struct", STRUCT_KEYW}, -#line 24 "scripts/genksyms/keywords.gperf" +#line 26 "scripts/genksyms/keywords.gperf" {"__restrict__", RESTRICT_KEYW}, -#line 25 "scripts/genksyms/keywords.gperf" +#line 27 "scripts/genksyms/keywords.gperf" {"restrict", RESTRICT_KEYW}, -#line 23 "scripts/genksyms/keywords.gperf" +#line 25 "scripts/genksyms/keywords.gperf" {"_restrict", RESTRICT_KEYW}, -#line 16 "scripts/genksyms/keywords.gperf" +#line 18 "scripts/genksyms/keywords.gperf" {"__inline__", INLINE_KEYW}, -#line 10 "scripts/genksyms/keywords.gperf" +#line 12 "scripts/genksyms/keywords.gperf" {"__attribute", ATTRIBUTE_KEYW}, {""}, -#line 14 "scripts/genksyms/keywords.gperf" +#line 16 "scripts/genksyms/keywords.gperf" {"__extension__", EXTENSION_KEYW}, -#line 35 "scripts/genksyms/keywords.gperf" +#line 37 "scripts/genksyms/keywords.gperf" {"enum", ENUM_KEYW}, -#line 19 "scripts/genksyms/keywords.gperf" +#line 21 "scripts/genksyms/keywords.gperf" {"__volatile", VOLATILE_KEYW}, -#line 36 "scripts/genksyms/keywords.gperf" +#line 38 "scripts/genksyms/keywords.gperf" {"extern", EXTERN_KEYW}, {""}, -#line 17 "scripts/genksyms/keywords.gperf" +#line 19 "scripts/genksyms/keywords.gperf" {"__signed", SIGNED_KEYW}, -#line 7 "scripts/genksyms/keywords.gperf" +#line 9 "scripts/genksyms/keywords.gperf" {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW}, {""}, -#line 51 "scripts/genksyms/keywords.gperf" +#line 53 "scripts/genksyms/keywords.gperf" {"typeof", TYPEOF_KEYW}, -#line 46 "scripts/genksyms/keywords.gperf" +#line 48 "scripts/genksyms/keywords.gperf" {"typedef", TYPEDEF_KEYW}, -#line 15 "scripts/genksyms/keywords.gperf" +#line 17 "scripts/genksyms/keywords.gperf" {"__inline", INLINE_KEYW}, -#line 31 "scripts/genksyms/keywords.gperf" +#line 33 "scripts/genksyms/keywords.gperf" {"auto", AUTO_KEYW}, -#line 47 "scripts/genksyms/keywords.gperf" +#line 49 "scripts/genksyms/keywords.gperf" {"union", UNION_KEYW}, {""}, {""}, -#line 48 "scripts/genksyms/keywords.gperf" +#line 50 "scripts/genksyms/keywords.gperf" {"unsigned", UNSIGNED_KEYW}, -#line 49 "scripts/genksyms/keywords.gperf" +#line 51 "scripts/genksyms/keywords.gperf" {"void", VOID_KEYW}, -#line 42 "scripts/genksyms/keywords.gperf" +#line 44 "scripts/genksyms/keywords.gperf" {"short", SHORT_KEYW}, {""}, {""}, -#line 50 "scripts/genksyms/keywords.gperf" +#line 52 "scripts/genksyms/keywords.gperf" {"volatile", VOLATILE_KEYW}, {""}, -#line 37 "scripts/genksyms/keywords.gperf" +#line 39 "scripts/genksyms/keywords.gperf" {"float", FLOAT_KEYW}, -#line 34 "scripts/genksyms/keywords.gperf" +#line 36 "scripts/genksyms/keywords.gperf" {"double", DOUBLE_KEYW}, {""}, -#line 5 "scripts/genksyms/keywords.gperf" +#line 7 "scripts/genksyms/keywords.gperf" {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW}, {""}, {""}, -#line 38 "scripts/genksyms/keywords.gperf" +#line 40 "scripts/genksyms/keywords.gperf" {"inline", INLINE_KEYW}, -#line 6 "scripts/genksyms/keywords.gperf" +#line 8 "scripts/genksyms/keywords.gperf" {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW}, -#line 41 "scripts/genksyms/keywords.gperf" +#line 43 "scripts/genksyms/keywords.gperf" {"register", REGISTER_KEYW}, {""}, -#line 22 "scripts/genksyms/keywords.gperf" +#line 24 "scripts/genksyms/keywords.gperf" {"_Bool", BOOL_KEYW}, -#line 43 "scripts/genksyms/keywords.gperf" +#line 45 "scripts/genksyms/keywords.gperf" {"signed", SIGNED_KEYW}, {""}, {""}, -#line 40 "scripts/genksyms/keywords.gperf" +#line 42 "scripts/genksyms/keywords.gperf" {"long", LONG_KEYW} }; diff --git a/scripts/genksyms/keywords.gperf b/scripts/genksyms/keywords.gperf index 5ef3733225fb..8fe977a4d57b 100644 --- a/scripts/genksyms/keywords.gperf +++ b/scripts/genksyms/keywords.gperf @@ -1,4 +1,6 @@ %{ +struct resword; +static const struct resword *is_reserved_word(register const char *str, register unsigned int len); %} struct resword { const char *name; int token; } %% From 1b98c00bf3a8a417be6412d8a3ed867a72b18f68 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Fri, 16 Oct 2009 14:06:13 -0700 Subject: [PATCH 427/743] Documentation/vm/page-types.c: Declare checked_open static Nothing outside of Documentation/vm/page-types.c references checked_open. Signed-off-by: Josh Triplett --- Documentation/vm/page-types.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c index 3ec4f2a22585..4793c6aac733 100644 --- a/Documentation/vm/page-types.c +++ b/Documentation/vm/page-types.c @@ -218,7 +218,7 @@ static void fatal(const char *x, ...) exit(EXIT_FAILURE); } -int checked_open(const char *pathname, int flags) +static int checked_open(const char *pathname, int flags) { int fd = open(pathname, flags); From ad0cd62ab632afe9b562b5f09343c21e1521505d Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Fri, 16 Oct 2009 14:46:56 -0700 Subject: [PATCH 428/743] arch/alpha/boot/tools/objstrip.c: Mark "usage" static Nothing outside of arch/alpha/boot/tools/objstrip.c references the usage function. Signed-off-by: Josh Triplett --- arch/alpha/boot/tools/objstrip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/alpha/boot/tools/objstrip.c b/arch/alpha/boot/tools/objstrip.c index 9d0727d18aee..367d53d031fc 100644 --- a/arch/alpha/boot/tools/objstrip.c +++ b/arch/alpha/boot/tools/objstrip.c @@ -35,7 +35,7 @@ const char * prog_name; -void +static void usage (void) { fprintf(stderr, From 95981e7de53a7c67dc32d7440c160947c134d8eb Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Fri, 16 Oct 2009 14:52:05 -0700 Subject: [PATCH 429/743] arch/powerpc/boot/addRamDisk.c: Mark several internal functions static Nothing outside of arch/powerpc/boot/addRamDisk.c references the functions "get4k", "put4k", or "death". Signed-off-by: Josh Triplett --- arch/powerpc/boot/addRamDisk.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/boot/addRamDisk.c b/arch/powerpc/boot/addRamDisk.c index c02a99952be7..893f446cbd22 100644 --- a/arch/powerpc/boot/addRamDisk.c +++ b/arch/powerpc/boot/addRamDisk.c @@ -58,7 +58,7 @@ static int check_elf64(void *p, int size, struct addr_range *r) return 64; } -void get4k(FILE *file, char *buf ) +static void get4k(FILE *file, char *buf ) { unsigned j; unsigned num = fread(buf, 1, 4096, file); @@ -66,12 +66,12 @@ void get4k(FILE *file, char *buf ) buf[j] = 0; } -void put4k(FILE *file, char *buf ) +static void put4k(FILE *file, char *buf ) { fwrite(buf, 1, 4096, file); } -void death(const char *msg, FILE *fdesc, const char *fname) +static void death(const char *msg, FILE *fdesc, const char *fname) { fprintf(stderr, msg); fclose(fdesc); From c843e315469a1519b83835628ca8906daf9a2c0a Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Fri, 16 Oct 2009 14:58:29 -0700 Subject: [PATCH 430/743] arch/sparc/boot/*.c: Mark various internal functions static Signed-off-by: Josh Triplett --- arch/sparc/boot/btfixupprep.c | 8 ++++---- arch/sparc/boot/piggyback_32.c | 10 +++++----- arch/sparc/boot/piggyback_64.c | 2 +- 3 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/sparc/boot/btfixupprep.c b/arch/sparc/boot/btfixupprep.c index 52a4208fe4f0..bbf91b9c3d39 100644 --- a/arch/sparc/boot/btfixupprep.c +++ b/arch/sparc/boot/btfixupprep.c @@ -61,14 +61,14 @@ unsigned long lastfoffset = -1; unsigned long lastfrelno; btfixup *lastf; -void fatal(void) __attribute__((noreturn)); -void fatal(void) +static void fatal(void) __attribute__((noreturn)); +static void fatal(void) { fprintf(stderr, "Malformed output from objdump\n%s\n", buffer); exit(1); } -btfixup *find(int type, char *name) +static btfixup *find(int type, char *name) { int i; for (i = 0; i < last; i++) { @@ -88,7 +88,7 @@ btfixup *find(int type, char *name) return array + last - 1; } -void set_mode (char *buffer) +static void set_mode (char *buffer) { for (mode = 0;; mode++) if (buffer[mode] < '0' || buffer[mode] > '9') diff --git a/arch/sparc/boot/piggyback_32.c b/arch/sparc/boot/piggyback_32.c index e8dc9adfcd61..ac944aec7301 100644 --- a/arch/sparc/boot/piggyback_32.c +++ b/arch/sparc/boot/piggyback_32.c @@ -35,17 +35,17 @@ * as PROM looks for a.out image only. */ -unsigned short ld2(char *p) +static unsigned short ld2(char *p) { return (p[0] << 8) | p[1]; } -unsigned int ld4(char *p) +static unsigned int ld4(char *p) { return (p[0] << 24) | (p[1] << 16) | (p[2] << 8) | p[3]; } -void st4(char *p, unsigned int x) +static void st4(char *p, unsigned int x) { p[0] = x >> 24; p[1] = x >> 16; @@ -53,7 +53,7 @@ void st4(char *p, unsigned int x) p[3] = x; } -void usage(void) +static void usage(void) { /* fs_img.gz is an image of initial ramdisk. */ fprintf(stderr, "Usage: piggyback vmlinux.aout System.map fs_img.gz\n"); @@ -61,7 +61,7 @@ void usage(void) exit(1); } -void die(char *str) +static void die(char *str) { perror (str); exit(1); diff --git a/arch/sparc/boot/piggyback_64.c b/arch/sparc/boot/piggyback_64.c index c63fd1b6bdd4..a26a686cb5aa 100644 --- a/arch/sparc/boot/piggyback_64.c +++ b/arch/sparc/boot/piggyback_64.c @@ -32,7 +32,7 @@ /* Note: run this on an a.out kernel (use elftoaout for it), as PROM looks for a.out image onlly usage: piggyback vmlinux System.map tail, where tail is gzipped fs of the initial ramdisk */ -void die(char *str) +static void die(char *str) { perror (str); exit(1); From 0592e4c49e5af8ef71a1aa9308a100d711c64911 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Fri, 16 Oct 2009 15:12:13 -0700 Subject: [PATCH 431/743] drm: radeon: Mark several functions static in mkregtable Signed-off-by: Josh Triplett --- drivers/gpu/drm/radeon/mkregtable.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/radeon/mkregtable.c b/drivers/gpu/drm/radeon/mkregtable.c index fb211e585dea..0d79577c1576 100644 --- a/drivers/gpu/drm/radeon/mkregtable.c +++ b/drivers/gpu/drm/radeon/mkregtable.c @@ -561,7 +561,7 @@ struct table { char *gpu_prefix; }; -struct offset *offset_new(unsigned o) +static struct offset *offset_new(unsigned o) { struct offset *offset; @@ -573,12 +573,12 @@ struct offset *offset_new(unsigned o) return offset; } -void table_offset_add(struct table *t, struct offset *offset) +static void table_offset_add(struct table *t, struct offset *offset) { list_add_tail(&offset->list, &t->offsets); } -void table_init(struct table *t) +static void table_init(struct table *t) { INIT_LIST_HEAD(&t->offsets); t->offset_max = 0; @@ -586,7 +586,7 @@ void table_init(struct table *t) t->table = NULL; } -void table_print(struct table *t) +static void table_print(struct table *t) { unsigned nlloop, i, j, n, c, id; @@ -611,7 +611,7 @@ void table_print(struct table *t) printf("};\n"); } -int table_build(struct table *t) +static int table_build(struct table *t) { struct offset *offset; unsigned i, m; @@ -631,7 +631,7 @@ int table_build(struct table *t) } static char gpu_name[10]; -int parser_auth(struct table *t, const char *filename) +static int parser_auth(struct table *t, const char *filename) { FILE *file; regex_t mask_rex; From 23c4ace526fe9c5f9a4b1b0759cb76a285052ba0 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Fri, 16 Oct 2009 15:52:06 -0700 Subject: [PATCH 432/743] dtc: Set "noinput" in the lexer to avoid an unused function Regenerate the corresponding generated lexer. Regenerating the lexer with current flex also provides prototypes for various yy* functions, making some -Wmissing-prototypes warnings go away as well. Signed-off-by: Josh Triplett --- scripts/dtc/dtc-lexer.l | 2 +- scripts/dtc/dtc-lexer.lex.c_shipped | 69 ++++++++++++++++++++++------- 2 files changed, 54 insertions(+), 17 deletions(-) diff --git a/scripts/dtc/dtc-lexer.l b/scripts/dtc/dtc-lexer.l index 44dbfd3f0976..a627bbee91d4 100644 --- a/scripts/dtc/dtc-lexer.l +++ b/scripts/dtc/dtc-lexer.l @@ -18,7 +18,7 @@ * USA */ -%option noyywrap nounput yylineno +%option noyywrap noinput nounput yylineno %x INCLUDE %x BYTESTRING diff --git a/scripts/dtc/dtc-lexer.lex.c_shipped b/scripts/dtc/dtc-lexer.lex.c_shipped index ac392cb040f6..e27cc636e326 100644 --- a/scripts/dtc/dtc-lexer.lex.c_shipped +++ b/scripts/dtc/dtc-lexer.lex.c_shipped @@ -9,7 +9,7 @@ #define FLEX_SCANNER #define YY_FLEX_MAJOR_VERSION 2 #define YY_FLEX_MINOR_VERSION 5 -#define YY_FLEX_SUBMINOR_VERSION 34 +#define YY_FLEX_SUBMINOR_VERSION 35 #if YY_FLEX_SUBMINOR_VERSION > 0 #define FLEX_BETA #endif @@ -54,7 +54,6 @@ typedef int flex_int32_t; typedef unsigned char flex_uint8_t; typedef unsigned short int flex_uint16_t; typedef unsigned int flex_uint32_t; -#endif /* ! C99 */ /* Limits of integral types. */ #ifndef INT8_MIN @@ -85,6 +84,8 @@ typedef unsigned int flex_uint32_t; #define UINT32_MAX (4294967295U) #endif +#endif /* ! C99 */ + #endif /* ! FLEXINT_H */ #ifdef __cplusplus @@ -141,7 +142,15 @@ typedef unsigned int flex_uint32_t; /* Size of default input buffer. */ #ifndef YY_BUF_SIZE +#ifdef __ia64__ +/* On IA-64, the buffer size is 16k, not 8k. + * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. + * Ditto for the __ia64__ case accordingly. + */ +#define YY_BUF_SIZE 32768 +#else #define YY_BUF_SIZE 16384 +#endif /* __ia64__ */ #endif /* The state buf must be large enough to hold one state per character in the main buffer. @@ -192,13 +201,6 @@ extern FILE *yyin, *yyout; #define unput(c) yyunput( c, (yytext_ptr) ) -/* The following is because we cannot portably get our hands on size_t - * (without autoconf's help, which isn't available because we want - * flex-generated scanners to compile on their own). - * Given that the standard has decreed that size_t exists since 1989, - * I guess we can afford to depend on it. Manoj. - */ - #ifndef YY_TYPEDEF_YY_SIZE_T #define YY_TYPEDEF_YY_SIZE_T typedef size_t yy_size_t; @@ -604,6 +606,7 @@ char *yytext; * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 * USA */ +#define YY_NO_INPUT 1 @@ -634,7 +637,7 @@ static int dts_version; /* = 0 */ static void push_input_file(const char *filename); static int pop_input_file(void); -#line 638 "dtc-lexer.lex.c" +#line 641 "dtc-lexer.lex.c" #define INITIAL 0 #define INCLUDE 1 @@ -656,6 +659,35 @@ static int pop_input_file(void); static int yy_init_globals (void ); +/* Accessor methods to globals. + These are made visible to non-reentrant scanners for convenience. */ + +int yylex_destroy (void ); + +int yyget_debug (void ); + +void yyset_debug (int debug_flag ); + +YY_EXTRA_TYPE yyget_extra (void ); + +void yyset_extra (YY_EXTRA_TYPE user_defined ); + +FILE *yyget_in (void ); + +void yyset_in (FILE * in_str ); + +FILE *yyget_out (void ); + +void yyset_out (FILE * out_str ); + +int yyget_leng (void ); + +char *yyget_text (void ); + +int yyget_lineno (void ); + +void yyset_lineno (int line_number ); + /* Macros after this point can all be overridden by user definitions in * section 1. */ @@ -688,7 +720,12 @@ static int input (void ); /* Amount of stuff to slurp up with each read. */ #ifndef YY_READ_BUF_SIZE +#ifdef __ia64__ +/* On IA-64, the buffer size is 16k, not 8k */ +#define YY_READ_BUF_SIZE 16384 +#else #define YY_READ_BUF_SIZE 8192 +#endif /* __ia64__ */ #endif /* Copy whatever the last rule matched to the standard output. */ @@ -696,7 +733,7 @@ static int input (void ); /* This used to be an fputs(), but since the string might contain NUL's, * we now use fwrite(). */ -#define ECHO fwrite( yytext, yyleng, 1, yyout ) +#define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0) #endif /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, @@ -707,7 +744,7 @@ static int input (void ); if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ { \ int c = '*'; \ - int n; \ + size_t n; \ for ( n = 0; n < max_size && \ (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ buf[n] = (char) c; \ @@ -791,7 +828,7 @@ YY_DECL #line 64 "dtc-lexer.l" -#line 795 "dtc-lexer.lex.c" +#line 832 "dtc-lexer.lex.c" if ( !(yy_init) ) { @@ -1116,7 +1153,7 @@ YY_RULE_SETUP #line 222 "dtc-lexer.l" ECHO; YY_BREAK -#line 1120 "dtc-lexer.lex.c" +#line 1157 "dtc-lexer.lex.c" case YY_END_OF_BUFFER: { @@ -1840,8 +1877,8 @@ YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) /** Setup the input buffer state to scan the given bytes. The next call to yylex() will * scan from a @e copy of @a bytes. - * @param bytes the byte buffer to scan - * @param len the number of bytes in the buffer pointed to by @a bytes. + * @param yybytes the byte buffer to scan + * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. * * @return the newly allocated buffer state object. */ From 5ccd991548894f0b699f7d0137c31758a6948ddc Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Fri, 16 Oct 2009 15:53:55 -0700 Subject: [PATCH 433/743] dtc: Mark various internal functions static Signed-off-by: Josh Triplett --- scripts/dtc/data.c | 2 +- scripts/dtc/libfdt/fdt_ro.c | 2 +- scripts/dtc/treesource.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/scripts/dtc/data.c b/scripts/dtc/data.c index dd2e3d39d4c1..fe555e819bf8 100644 --- a/scripts/dtc/data.c +++ b/scripts/dtc/data.c @@ -217,7 +217,7 @@ struct data data_insert_at_marker(struct data d, struct marker *m, return d; } -struct data data_append_markers(struct data d, struct marker *m) +static struct data data_append_markers(struct data d, struct marker *m) { struct marker **mp = &d.markers; diff --git a/scripts/dtc/libfdt/fdt_ro.c b/scripts/dtc/libfdt/fdt_ro.c index fbbba44fcd0d..22e692919ff9 100644 --- a/scripts/dtc/libfdt/fdt_ro.c +++ b/scripts/dtc/libfdt/fdt_ro.c @@ -411,7 +411,7 @@ int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle) &phandle, sizeof(phandle)); } -int _stringlist_contains(const char *strlist, int listlen, const char *str) +static int _stringlist_contains(const char *strlist, int listlen, const char *str) { int len = strlen(str); const char *p; diff --git a/scripts/dtc/treesource.c b/scripts/dtc/treesource.c index ebeb6eb27907..1521ff11bb97 100644 --- a/scripts/dtc/treesource.c +++ b/scripts/dtc/treesource.c @@ -52,7 +52,7 @@ static void write_prefix(FILE *f, int level) fputc('\t', f); } -int isstring(char c) +static int isstring(char c) { return (isprint(c) || (c == '\0') From e8e63cbf9a339c972eeb5ccf8777c8067bdfd869 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Fri, 16 Oct 2009 16:03:49 -0700 Subject: [PATCH 434/743] oss: Mark loadhex static in hex2hex.c Nothing outside of hex2hex.c references loadhex. Signed-off-by: Josh Triplett --- sound/oss/hex2hex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/oss/hex2hex.c b/sound/oss/hex2hex.c index 5460faae98c9..041ef5c52bc2 100644 --- a/sound/oss/hex2hex.c +++ b/sound/oss/hex2hex.c @@ -12,7 +12,7 @@ #define MAX_SIZE (256*1024) unsigned char buf[MAX_SIZE]; -int loadhex(FILE *inf, unsigned char *buf) +static int loadhex(FILE *inf, unsigned char *buf) { int l=0, c, i; From 25583d4b5aa2c9aa5ed03ecc2ce73f3922714495 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Sun, 15 Nov 2009 14:38:47 -0800 Subject: [PATCH 435/743] Makefile: Add -Wmising-prototypes to HOSTCFLAGS Now that all host programs use static for all private functions and forward prototypes for all extern functions, add -Wmissing-prototypes to HOSTCFLAGS in the hopes of keeping it that way. All versions of GCC supported by the kernel handle -Wmissing-prototypes. Signed-off-by: Josh Triplett --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 326791575b0a..ef8cce7ab546 100644 --- a/Makefile +++ b/Makefile @@ -221,7 +221,7 @@ CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ HOSTCC = gcc HOSTCXX = g++ -HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer +HOSTCFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer HOSTCXXFLAGS = -O2 # Decide whether to build built-in, modular, or both. From 93f19c9fc8c98bb6d2e9825115989603ffd5cd1f Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 3 Sep 2009 12:34:19 +0300 Subject: [PATCH 436/743] Bluetooth: Set general bonding security for ACL by default This patch fixes double pairing issues with Secure Simple Paring support. It was observed that when pairing with SSP enabled, that the confirmation will be asked twice. http://www.spinics.net/lists/linux-bluetooth/msg02473.html This also causes bug when initiating SSP connection from Windows Vista. The reason is because bluetoothd does not store link keys since HCIGETAUTHINFO returns 0. Setting default to general bonding fixes these issues. Signed-off-by: Andrei Emeltchenko Signed-off-by: Marcel Holtmann --- net/bluetooth/hci_conn.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index a9750984f772..b7c4224f4e7d 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -211,6 +211,7 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst) conn->type = type; conn->mode = HCI_CM_ACTIVE; conn->state = BT_OPEN; + conn->auth_type = HCI_AT_GENERAL_BONDING; conn->power_save = 1; conn->disc_timeout = HCI_DISCONN_TIMEOUT; From a0e55a32afc2130e5ae506755e4b8eb42a23b568 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Tue, 29 Sep 2009 01:42:23 -0300 Subject: [PATCH 437/743] Bluetooth: Select Basic Mode as default for SOCK_SEQPACKET The default mode for SOCK_SEQPACKET is Basic Mode. So when no mode has been specified, Basic Mode shall be used. This is important for current application to keep working as expected and not cause a regression. Signed-off-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann --- net/bluetooth/l2cap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 77e9fb130adb..076caa10d2f6 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -2205,7 +2205,7 @@ static int l2cap_build_conf_req(struct sock *sk, void *data) { struct l2cap_pinfo *pi = l2cap_pi(sk); struct l2cap_conf_req *req = data; - struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_ERTM }; + struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_BASIC }; void *ptr = req->data; BT_DBG("sk %p", sk); From 68ae6639b6dff117ba37f648f1611a4629abadf0 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Sat, 17 Oct 2009 21:41:01 -0300 Subject: [PATCH 438/743] Bluetooth: Fix regression with L2CAP configuration in Basic Mode Basic Mode is the default mode of operation of a L2CAP entity. In this case the RFC (Retransmission and Flow Control) configuration option should not be used at all. Normally remote L2CAP implementation should just ignore this option, but it can cause various side effects with other Bluetooth stacks that are not capable of handling unknown options. Signed-off-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann --- net/bluetooth/l2cap.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 076caa10d2f6..947f8bbb4bb3 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -2394,6 +2394,10 @@ done: rfc.monitor_timeout = L2CAP_DEFAULT_MONITOR_TO; pi->conf_state |= L2CAP_CONF_MODE_DONE; + + l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, + sizeof(rfc), (unsigned long) &rfc); + break; case L2CAP_MODE_STREAMING: @@ -2401,6 +2405,10 @@ done: pi->max_pdu_size = rfc.max_pdu_size; pi->conf_state |= L2CAP_CONF_MODE_DONE; + + l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, + sizeof(rfc), (unsigned long) &rfc); + break; default: @@ -2410,9 +2418,6 @@ done: rfc.mode = pi->mode; } - l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, - sizeof(rfc), (unsigned long) &rfc); - if (result == L2CAP_CONF_SUCCESS) pi->conf_state |= L2CAP_CONF_OUTPUT_DONE; } From 3fa8486bae2b56d9f47c1c281866d10fb56c3adc Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sun, 15 Nov 2009 21:14:59 -0800 Subject: [PATCH 439/743] r6040: fix version printing The version string already contains the printk level specifying it again results in the following message being printed: <6>r6040: RDC R6040 NAPI ... Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/r6040.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 7dfcb58b0eb4..8b14c6eda7c3 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -1085,7 +1085,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev, int bar = 0; u16 *adrp; - printk(KERN_INFO "%s\n", version); + printk("%s\n", version); err = pci_enable_device(pdev); if (err) From 655a6595af5cd7e91992bd768d7a5949f813dc0d Mon Sep 17 00:00:00 2001 From: "Stanislav O. Bezzubtsev" Date: Sun, 15 Nov 2009 21:17:02 -0800 Subject: [PATCH 440/743] forcedeth: mac address fix Use the existing random_ether_addr() to generate random MAC instead of doing it by-hand. Signed-off-by: Stanislav O. Bezzubtsev Signed-off-by: David S. Miller --- drivers/net/forcedeth.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 0a1c2bb27d4d..73fe97777201 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -5820,10 +5820,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i dev->dev_addr); dev_printk(KERN_ERR, &pci_dev->dev, "Please complain to your hardware vendor. Switching to a random MAC.\n"); - dev->dev_addr[0] = 0x00; - dev->dev_addr[1] = 0x00; - dev->dev_addr[2] = 0x6c; - get_random_bytes(&dev->dev_addr[3], 3); + random_ether_addr(dev->dev_addr); } dprintk(KERN_DEBUG "%s: MAC Address %pM\n", From 2c554e10e84e958366344aa5bd293c6feea72d89 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 15 Nov 2009 21:18:13 -0800 Subject: [PATCH 441/743] mISDN: fix error return in HFCmulti_init() The returned error should stay negative Signed-off-by: Roel Kluin Acked-by: Karsten Keil Signed-off-by: David S. Miller --- drivers/isdn/hardware/mISDN/hfcmulti.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index faed794cf75a..a6624ad252c5 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -5481,7 +5481,7 @@ HFCmulti_init(void) if (err) { printk(KERN_ERR "error registering embedded driver: " "%x\n", err); - return -err; + return err; } HFC_cnt++; printk(KERN_INFO "%d devices registered\n", HFC_cnt); From f88c5b9887a95ce424db629ee79b57f6ef5bfddd Mon Sep 17 00:00:00 2001 From: Sriram Date: Thu, 12 Nov 2009 02:14:38 +0000 Subject: [PATCH 442/743] smsc911x: Fix Console Hang when bringing the interface down. In the NAPI poll function, check for netif_running() is unnecassary. In addition to associated runtime overhead, it also results in continuous softirq loop when the interface is brought down under heavy traffic(tested with Traffic Generator).Once the interface is disabled, the poll function always returns zero(with the check for netif_running) and napi_complete() would never get called resulting in softirq loop. Signed-off-by: Sriramakrishnan Signed-off-by: David S. Miller --- drivers/net/smsc911x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index ccdd196f5297..f9cdcbcb77d4 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -986,7 +986,7 @@ static int smsc911x_poll(struct napi_struct *napi, int budget) struct net_device *dev = pdata->dev; int npackets = 0; - while (likely(netif_running(dev)) && (npackets < budget)) { + while (npackets < budget) { unsigned int pktlength; unsigned int pktwords; struct sk_buff *skb; From 5bfa2a17f2b79eb6a63c5d47ce89d5798bba086a Mon Sep 17 00:00:00 2001 From: Sriram Date: Thu, 12 Nov 2009 01:55:42 +0000 Subject: [PATCH 443/743] TI Davinci EMAC : Fix Console Hang when bringing the interface down In the NAPI poll function(emac_poll), check for netif_running() is unnecassary. In addition to associated runtime overhead, it also results in a continuous softirq loop when the interface is brought down under heavy traffic(tested wit Traffic Generator). Once the interface is disabled, the poll function always returns zero(with the check for netif_running) and napi_complete() would never get called resulting in softirq loop. Signed-off-by: Sriramakrishnan Acked-by: Chaithrika U S Signed-off-by: David S. Miller --- drivers/net/davinci_emac.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 3179521aee90..db6380379478 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -2140,9 +2140,6 @@ static int emac_poll(struct napi_struct *napi, int budget) u32 status = 0; u32 num_pkts = 0; - if (!netif_running(ndev)) - return 0; - /* Check interrupt vectors and call packet processing */ status = emac_read(EMAC_MACINVECTOR); From e29d4363174949a7a4e46f670993d7ff43342c1c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 15 Nov 2009 22:23:47 -0800 Subject: [PATCH 444/743] Revert "isdn: isdn_ppp: Use SKB list facilities instead of home-grown implementation." This reverts commit 38783e671399b5405f1fd177d602c400a9577ae6. It causes kernel bugzilla #14594 Signed-off-by: David S. Miller --- drivers/isdn/i4l/isdn_ppp.c | 348 +++++++++++++++++------------------- include/linux/isdn_ppp.h | 2 +- 2 files changed, 162 insertions(+), 188 deletions(-) diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c index 2d14b64202a3..642d5aaf53ce 100644 --- a/drivers/isdn/i4l/isdn_ppp.c +++ b/drivers/isdn/i4l/isdn_ppp.c @@ -1535,10 +1535,8 @@ static int isdn_ppp_mp_bundle_array_init(void) int sz = ISDN_MAX_CHANNELS*sizeof(ippp_bundle); if( (isdn_ppp_bundle_arr = kzalloc(sz, GFP_KERNEL)) == NULL ) return -ENOMEM; - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { + for( i = 0; i < ISDN_MAX_CHANNELS; i++ ) spin_lock_init(&isdn_ppp_bundle_arr[i].lock); - skb_queue_head_init(&isdn_ppp_bundle_arr[i].frags); - } return 0; } @@ -1571,7 +1569,7 @@ static int isdn_ppp_mp_init( isdn_net_local * lp, ippp_bundle * add_to ) if ((lp->netdev->pb = isdn_ppp_mp_bundle_alloc()) == NULL) return -ENOMEM; lp->next = lp->last = lp; /* nobody else in a queue */ - skb_queue_head_init(&lp->netdev->pb->frags); + lp->netdev->pb->frags = NULL; lp->netdev->pb->frames = 0; lp->netdev->pb->seq = UINT_MAX; } @@ -1583,29 +1581,28 @@ static int isdn_ppp_mp_init( isdn_net_local * lp, ippp_bundle * add_to ) static u32 isdn_ppp_mp_get_seq( int short_seq, struct sk_buff * skb, u32 last_seq ); -static void isdn_ppp_mp_discard(ippp_bundle *mp, struct sk_buff *from, - struct sk_buff *to); -static void isdn_ppp_mp_reassembly(isdn_net_dev *net_dev, isdn_net_local *lp, - struct sk_buff *from, struct sk_buff *to, - u32 lastseq); -static void isdn_ppp_mp_free_skb(ippp_bundle *mp, struct sk_buff *skb); +static struct sk_buff * isdn_ppp_mp_discard( ippp_bundle * mp, + struct sk_buff * from, struct sk_buff * to ); +static void isdn_ppp_mp_reassembly( isdn_net_dev * net_dev, isdn_net_local * lp, + struct sk_buff * from, struct sk_buff * to ); +static void isdn_ppp_mp_free_skb( ippp_bundle * mp, struct sk_buff * skb ); static void isdn_ppp_mp_print_recv_pkt( int slot, struct sk_buff * skb ); static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, - struct sk_buff *skb) + struct sk_buff *skb) { - struct sk_buff *newfrag, *frag, *start, *nextf; - u32 newseq, minseq, thisseq; - isdn_mppp_stats *stats; struct ippp_struct *is; + isdn_net_local * lpq; + ippp_bundle * mp; + isdn_mppp_stats * stats; + struct sk_buff * newfrag, * frag, * start, *nextf; + u32 newseq, minseq, thisseq; unsigned long flags; - isdn_net_local *lpq; - ippp_bundle *mp; int slot; spin_lock_irqsave(&net_dev->pb->lock, flags); - mp = net_dev->pb; - stats = &mp->stats; + mp = net_dev->pb; + stats = &mp->stats; slot = lp->ppp_slot; if (slot < 0 || slot >= ISDN_MAX_CHANNELS) { printk(KERN_ERR "%s: lp->ppp_slot(%d)\n", @@ -1616,19 +1613,20 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, return; } is = ippp_table[slot]; - if (++mp->frames > stats->max_queue_len) + if( ++mp->frames > stats->max_queue_len ) stats->max_queue_len = mp->frames; - + if (is->debug & 0x8) isdn_ppp_mp_print_recv_pkt(lp->ppp_slot, skb); - newseq = isdn_ppp_mp_get_seq(is->mpppcfg & SC_IN_SHORT_SEQ, - skb, is->last_link_seqno); + newseq = isdn_ppp_mp_get_seq(is->mpppcfg & SC_IN_SHORT_SEQ, + skb, is->last_link_seqno); + /* if this packet seq # is less than last already processed one, * toss it right away, but check for sequence start case first */ - if (mp->seq > MP_LONGSEQ_MAX && (newseq & MP_LONGSEQ_MAXBIT)) { + if( mp->seq > MP_LONGSEQ_MAX && (newseq & MP_LONGSEQ_MAXBIT) ) { mp->seq = newseq; /* the first packet: required for * rfc1990 non-compliant clients -- * prevents constant packet toss */ @@ -1638,7 +1636,7 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, spin_unlock_irqrestore(&mp->lock, flags); return; } - + /* find the minimum received sequence number over all links */ is->last_link_seqno = minseq = newseq; for (lpq = net_dev->queue;;) { @@ -1659,31 +1657,22 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * packets */ newfrag = skb; - /* Insert new fragment into the proper sequence slot. */ - skb_queue_walk(&mp->frags, frag) { - if (MP_SEQ(frag) == newseq) { - isdn_ppp_mp_free_skb(mp, newfrag); - newfrag = NULL; - break; - } - if (MP_LT(newseq, MP_SEQ(frag))) { - __skb_queue_before(&mp->frags, frag, newfrag); - newfrag = NULL; - break; - } - } - if (newfrag) - __skb_queue_tail(&mp->frags, newfrag); + /* if this new fragment is before the first one, then enqueue it now. */ + if ((frag = mp->frags) == NULL || MP_LT(newseq, MP_SEQ(frag))) { + newfrag->next = frag; + mp->frags = frag = newfrag; + newfrag = NULL; + } - frag = skb_peek(&mp->frags); - start = ((MP_FLAGS(frag) & MP_BEGIN_FRAG) && - (MP_SEQ(frag) == mp->seq)) ? frag : NULL; - if (!start) - goto check_overflow; + start = MP_FLAGS(frag) & MP_BEGIN_FRAG && + MP_SEQ(frag) == mp->seq ? frag : NULL; - /* main fragment traversing loop + /* + * main fragment traversing loop * * try to accomplish several tasks: + * - insert new fragment into the proper sequence slot (once that's done + * newfrag will be set to NULL) * - reassemble any complete fragment sequence (non-null 'start' * indicates there is a continguous sequence present) * - discard any incomplete sequences that are below minseq -- due @@ -1692,46 +1681,71 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * come to complete such sequence and it should be discarded * * loop completes when we accomplished the following tasks: + * - new fragment is inserted in the proper sequence ('newfrag' is + * set to NULL) * - we hit a gap in the sequence, so no reassembly/processing is * possible ('start' would be set to NULL) * * algorithm for this code is derived from code in the book * 'PPP Design And Debugging' by James Carlson (Addison-Wesley) */ - skb_queue_walk_safe(&mp->frags, frag, nextf) { - thisseq = MP_SEQ(frag); + while (start != NULL || newfrag != NULL) { - /* check for misplaced start */ - if (start != frag && (MP_FLAGS(frag) & MP_BEGIN_FRAG)) { - printk(KERN_WARNING"isdn_mppp(seq %d): new " - "BEGIN flag with no prior END", thisseq); - stats->seqerrs++; - stats->frame_drops++; - isdn_ppp_mp_discard(mp, start, frag); - start = frag; - } else if (MP_LE(thisseq, minseq)) { - if (MP_FLAGS(frag) & MP_BEGIN_FRAG) + thisseq = MP_SEQ(frag); + nextf = frag->next; + + /* drop any duplicate fragments */ + if (newfrag != NULL && thisseq == newseq) { + isdn_ppp_mp_free_skb(mp, newfrag); + newfrag = NULL; + } + + /* insert new fragment before next element if possible. */ + if (newfrag != NULL && (nextf == NULL || + MP_LT(newseq, MP_SEQ(nextf)))) { + newfrag->next = nextf; + frag->next = nextf = newfrag; + newfrag = NULL; + } + + if (start != NULL) { + /* check for misplaced start */ + if (start != frag && (MP_FLAGS(frag) & MP_BEGIN_FRAG)) { + printk(KERN_WARNING"isdn_mppp(seq %d): new " + "BEGIN flag with no prior END", thisseq); + stats->seqerrs++; + stats->frame_drops++; + start = isdn_ppp_mp_discard(mp, start,frag); + nextf = frag->next; + } + } else if (MP_LE(thisseq, minseq)) { + if (MP_FLAGS(frag) & MP_BEGIN_FRAG) start = frag; - else { + else { if (MP_FLAGS(frag) & MP_END_FRAG) - stats->frame_drops++; - __skb_unlink(skb, &mp->frags); + stats->frame_drops++; + if( mp->frags == frag ) + mp->frags = nextf; isdn_ppp_mp_free_skb(mp, frag); + frag = nextf; continue; - } + } } - - /* if we have end fragment, then we have full reassembly - * sequence -- reassemble and process packet now + + /* if start is non-null and we have end fragment, then + * we have full reassembly sequence -- reassemble + * and process packet now */ - if (MP_FLAGS(frag) & MP_END_FRAG) { - minseq = mp->seq = (thisseq+1) & MP_LONGSEQ_MASK; - /* Reassemble the packet then dispatch it */ - isdn_ppp_mp_reassembly(net_dev, lp, start, frag, thisseq); + if (start != NULL && (MP_FLAGS(frag) & MP_END_FRAG)) { + minseq = mp->seq = (thisseq+1) & MP_LONGSEQ_MASK; + /* Reassemble the packet then dispatch it */ + isdn_ppp_mp_reassembly(net_dev, lp, start, nextf); + + start = NULL; + frag = NULL; - start = NULL; - frag = NULL; - } + mp->frags = nextf; + } /* check if need to update start pointer: if we just * reassembled the packet and sequence is contiguous @@ -1742,25 +1756,26 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * below low watermark and set start to the next frag or * clear start ptr. */ - if (nextf != (struct sk_buff *)&mp->frags && + if (nextf != NULL && ((thisseq+1) & MP_LONGSEQ_MASK) == MP_SEQ(nextf)) { - /* if we just reassembled and the next one is here, - * then start another reassembly. - */ - if (frag == NULL) { + /* if we just reassembled and the next one is here, + * then start another reassembly. */ + + if (frag == NULL) { if (MP_FLAGS(nextf) & MP_BEGIN_FRAG) - start = nextf; - else { - printk(KERN_WARNING"isdn_mppp(seq %d):" - " END flag with no following " - "BEGIN", thisseq); + start = nextf; + else + { + printk(KERN_WARNING"isdn_mppp(seq %d):" + " END flag with no following " + "BEGIN", thisseq); stats->seqerrs++; } } - } else { - if (nextf != (struct sk_buff *)&mp->frags && - frag != NULL && - MP_LT(thisseq, minseq)) { + + } else { + if ( nextf != NULL && frag != NULL && + MP_LT(thisseq, minseq)) { /* we've got a break in the sequence * and we not at the end yet * and we did not just reassembled @@ -1769,39 +1784,41 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * discard all the frames below low watermark * and start over */ stats->frame_drops++; - isdn_ppp_mp_discard(mp, start, nextf); + mp->frags = isdn_ppp_mp_discard(mp,start,nextf); } /* break in the sequence, no reassembly */ - start = NULL; - } - if (!start) - break; - } - -check_overflow: + start = NULL; + } + + frag = nextf; + } /* while -- main loop */ + + if (mp->frags == NULL) + mp->frags = frag; + /* rather straighforward way to deal with (not very) possible - * queue overflow - */ + * queue overflow */ if (mp->frames > MP_MAX_QUEUE_LEN) { stats->overflows++; - skb_queue_walk_safe(&mp->frags, frag, nextf) { - if (mp->frames <= MP_MAX_QUEUE_LEN) - break; - __skb_unlink(frag, &mp->frags); - isdn_ppp_mp_free_skb(mp, frag); + while (mp->frames > MP_MAX_QUEUE_LEN) { + frag = mp->frags->next; + isdn_ppp_mp_free_skb(mp, mp->frags); + mp->frags = frag; } } spin_unlock_irqrestore(&mp->lock, flags); } -static void isdn_ppp_mp_cleanup(isdn_net_local *lp) +static void isdn_ppp_mp_cleanup( isdn_net_local * lp ) { - struct sk_buff *skb, *tmp; - - skb_queue_walk_safe(&lp->netdev->pb->frags, skb, tmp) { - __skb_unlink(skb, &lp->netdev->pb->frags); - isdn_ppp_mp_free_skb(lp->netdev->pb, skb); + struct sk_buff * frag = lp->netdev->pb->frags; + struct sk_buff * nextfrag; + while( frag ) { + nextfrag = frag->next; + isdn_ppp_mp_free_skb(lp->netdev->pb, frag); + frag = nextfrag; } + lp->netdev->pb->frags = NULL; } static u32 isdn_ppp_mp_get_seq( int short_seq, @@ -1838,115 +1855,72 @@ static u32 isdn_ppp_mp_get_seq( int short_seq, return seq; } -static void isdn_ppp_mp_discard(ippp_bundle *mp, struct sk_buff *from, - struct sk_buff *to) +struct sk_buff * isdn_ppp_mp_discard( ippp_bundle * mp, + struct sk_buff * from, struct sk_buff * to ) { - if (from) { - struct sk_buff *skb, *tmp; - int freeing = 0; - - skb_queue_walk_safe(&mp->frags, skb, tmp) { - if (skb == to) - break; - if (skb == from) - freeing = 1; - if (!freeing) - continue; - __skb_unlink(skb, &mp->frags); - isdn_ppp_mp_free_skb(mp, skb); + if( from ) + while (from != to) { + struct sk_buff * next = from->next; + isdn_ppp_mp_free_skb(mp, from); + from = next; } - } + return from; } -static unsigned int calc_tot_len(struct sk_buff_head *queue, - struct sk_buff *from, struct sk_buff *to) +void isdn_ppp_mp_reassembly( isdn_net_dev * net_dev, isdn_net_local * lp, + struct sk_buff * from, struct sk_buff * to ) { - unsigned int tot_len = 0; - struct sk_buff *skb; - int found_start = 0; - - skb_queue_walk(queue, skb) { - if (skb == from) - found_start = 1; - if (!found_start) - continue; - tot_len += skb->len - MP_HEADER_LEN; - if (skb == to) - break; - } - return tot_len; -} - -/* Reassemble packet using fragments in the reassembly queue from - * 'from' until 'to', inclusive. - */ -static void isdn_ppp_mp_reassembly(isdn_net_dev *net_dev, isdn_net_local *lp, - struct sk_buff *from, struct sk_buff *to, - u32 lastseq) -{ - ippp_bundle *mp = net_dev->pb; - unsigned int tot_len; - struct sk_buff *skb; + ippp_bundle * mp = net_dev->pb; int proto; + struct sk_buff * skb; + unsigned int tot_len; if (lp->ppp_slot < 0 || lp->ppp_slot >= ISDN_MAX_CHANNELS) { printk(KERN_ERR "%s: lp->ppp_slot(%d) out of range\n", __func__, lp->ppp_slot); return; } - - tot_len = calc_tot_len(&mp->frags, from, to); - - if (MP_FLAGS(from) == (MP_BEGIN_FRAG | MP_END_FRAG)) { - if (ippp_table[lp->ppp_slot]->debug & 0x40) + if( MP_FLAGS(from) == (MP_BEGIN_FRAG | MP_END_FRAG) ) { + if( ippp_table[lp->ppp_slot]->debug & 0x40 ) printk(KERN_DEBUG "isdn_mppp: reassembly: frame %d, " - "len %d\n", MP_SEQ(from), from->len); + "len %d\n", MP_SEQ(from), from->len ); skb = from; skb_pull(skb, MP_HEADER_LEN); - __skb_unlink(skb, &mp->frags); mp->frames--; } else { - struct sk_buff *walk, *tmp; - int found_start = 0; + struct sk_buff * frag; + int n; - if (ippp_table[lp->ppp_slot]->debug & 0x40) + for(tot_len=n=0, frag=from; frag != to; frag=frag->next, n++) + tot_len += frag->len - MP_HEADER_LEN; + + if( ippp_table[lp->ppp_slot]->debug & 0x40 ) printk(KERN_DEBUG"isdn_mppp: reassembling frames %d " - "to %d, len %d\n", MP_SEQ(from), lastseq, - tot_len); - - skb = dev_alloc_skb(tot_len); - if (!skb) + "to %d, len %d\n", MP_SEQ(from), + (MP_SEQ(from)+n-1) & MP_LONGSEQ_MASK, tot_len ); + if( (skb = dev_alloc_skb(tot_len)) == NULL ) { printk(KERN_ERR "isdn_mppp: cannot allocate sk buff " - "of size %d\n", tot_len); + "of size %d\n", tot_len); + isdn_ppp_mp_discard(mp, from, to); + return; + } - found_start = 0; - skb_queue_walk_safe(&mp->frags, walk, tmp) { - if (walk == from) - found_start = 1; - if (!found_start) - continue; + while( from != to ) { + unsigned int len = from->len - MP_HEADER_LEN; - if (skb) { - unsigned int len = walk->len - MP_HEADER_LEN; - skb_copy_from_linear_data_offset(walk, MP_HEADER_LEN, - skb_put(skb, len), - len); - } - __skb_unlink(walk, &mp->frags); - isdn_ppp_mp_free_skb(mp, walk); - - if (walk == to) - break; + skb_copy_from_linear_data_offset(from, MP_HEADER_LEN, + skb_put(skb,len), + len); + frag = from->next; + isdn_ppp_mp_free_skb(mp, from); + from = frag; } } - if (!skb) - return; - proto = isdn_ppp_strip_proto(skb); isdn_ppp_push_higher(net_dev, lp, skb, proto); } -static void isdn_ppp_mp_free_skb(ippp_bundle *mp, struct sk_buff *skb) +static void isdn_ppp_mp_free_skb(ippp_bundle * mp, struct sk_buff * skb) { dev_kfree_skb(skb); mp->frames--; diff --git a/include/linux/isdn_ppp.h b/include/linux/isdn_ppp.h index 4c218ee7587a..8687a7dc0632 100644 --- a/include/linux/isdn_ppp.h +++ b/include/linux/isdn_ppp.h @@ -157,7 +157,7 @@ typedef struct { typedef struct { int mp_mrru; /* unused */ - struct sk_buff_head frags; /* fragments sl list */ + struct sk_buff * frags; /* fragments sl list -- use skb->next */ long frames; /* number of frames in the frame list */ unsigned int seq; /* last processed packet seq #: any packets * with smaller seq # will be dropped From bf97402052483c125a9ea7bf13df0dd9b4134078 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 16 Nov 2009 11:07:17 +0200 Subject: [PATCH 445/743] ALSA: ice1724 - make some bitfields unsigned This is a clean up and doesn't change the behavior. Bit fields should always be unsigned. Otherwise pm_suspend_enabled will be -1 when you want it to be 1. The other bad thing is that the sparse checker will complain 36 times if they aren't unsigned. The other bitfields in that struct are unsigned already. Signed-off-by: Dan Carpenter Signed-off-by: Takashi Iwai --- sound/pci/ice1712/ice1712.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/ice1712/ice1712.h b/sound/pci/ice1712/ice1712.h index 9da2dae64c5b..d063149e7047 100644 --- a/sound/pci/ice1712/ice1712.h +++ b/sound/pci/ice1712/ice1712.h @@ -382,8 +382,8 @@ struct snd_ice1712 { #ifdef CONFIG_PM int (*pm_suspend)(struct snd_ice1712 *); int (*pm_resume)(struct snd_ice1712 *); - int pm_suspend_enabled:1; - int pm_saved_is_spdif_master:1; + unsigned int pm_suspend_enabled:1; + unsigned int pm_saved_is_spdif_master:1; unsigned int pm_saved_spdif_ctrl; unsigned char pm_saved_spdif_cfg; unsigned int pm_saved_route; From 60ef66fcf40f0e7bc9579981aa16bd8218942a83 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 13 Oct 2009 13:06:50 +0100 Subject: [PATCH 446/743] regulator: Handle missing constraints in _regulator_disable() Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 744ea1d0b59b..efe568deda12 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1283,7 +1283,8 @@ static int _regulator_disable(struct regulator_dev *rdev) return -EIO; /* are we the last user and permitted to disable ? */ - if (rdev->use_count == 1 && !rdev->constraints->always_on) { + if (rdev->use_count == 1 && + (rdev->constraints && !rdev->constraints->always_on)) { /* we are last user */ if (_regulator_can_change_status(rdev) && From 9a767d43fbddb3319dca568df49c48e0d1bb6bd8 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 16 Oct 2009 14:16:15 +0200 Subject: [PATCH 447/743] regulator: Fix check of unsigned return value and transmit errors in wm831x_gp_ldo_get_mode() If ret is unsigned, the checks for negative wm831x_reg_read() return values are wrong. The error value should be transmitted to its caller, e.g. wm831x_gp_ldo_get_status() which tests for a negative return value. Signed-off-by: Roel Kluin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/wm831x-ldo.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c index bb61aede4801..902db56ce099 100644 --- a/drivers/regulator/wm831x-ldo.c +++ b/drivers/regulator/wm831x-ldo.c @@ -175,18 +175,18 @@ static unsigned int wm831x_gp_ldo_get_mode(struct regulator_dev *rdev) struct wm831x *wm831x = ldo->wm831x; int ctrl_reg = ldo->base + WM831X_LDO_CONTROL; int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; - unsigned int ret; + int ret; ret = wm831x_reg_read(wm831x, on_reg); if (ret < 0) - return 0; + return ret; if (!(ret & WM831X_LDO1_ON_MODE)) return REGULATOR_MODE_NORMAL; ret = wm831x_reg_read(wm831x, ctrl_reg); if (ret < 0) - return 0; + return ret; if (ret & WM831X_LDO1_LP_MODE) return REGULATOR_MODE_STANDBY; From 91e9c07bd635353d1a278bdb38dbb56ac371bcb8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 15 Nov 2009 23:30:24 +0000 Subject: [PATCH 448/743] net: Fix the rollback test in dev_change_name() net: Fix the rollback test in dev_change_name() In dev_change_name() an err variable is used for storing the original call_netdevice_notifiers() errno (negative) and testing for a rollback error later, but the test for non-zero is wrong, because the err might have positive value as well - from dev_alloc_name(). It means the rollback for a netdevice with a number > 0 will never happen. (The err test is reordered btw. to make it more readable.) Signed-off-by: Jarek Poplawski Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/dev.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index b8f74cfb1bfd..fe10551d3671 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -942,14 +942,15 @@ rollback: ret = notifier_to_errno(ret); if (ret) { - if (err) { - printk(KERN_ERR - "%s: name change rollback failed: %d.\n", - dev->name, ret); - } else { + /* err >= 0 after dev_alloc_name() or stores the first errno */ + if (err >= 0) { err = ret; memcpy(dev->name, oldname, IFNAMSIZ); goto rollback; + } else { + printk(KERN_ERR + "%s: name change rollback failed: %d.\n", + dev->name, ret); } } From be4c23c93c4828d36ac9e1a88410618a61676426 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 16 Nov 2009 12:45:39 +0100 Subject: [PATCH 449/743] hwmon: (s3c-hwmon) Ignore invalid divider settings Avoid registering channels that have zero divider settings in them, as this will only lead to kernel OOPS from divide-by-zero when the sysfs entry is read. Signed-off-by: Ben Dooks Signed-off-by: Jean Delvare --- drivers/hwmon/s3c-hwmon.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c index 3a524f2fe493..71835412529f 100644 --- a/drivers/hwmon/s3c-hwmon.c +++ b/drivers/hwmon/s3c-hwmon.c @@ -323,14 +323,21 @@ static int __devinit s3c_hwmon_probe(struct platform_device *dev) } for (i = 0; i < ARRAY_SIZE(pdata->in); i++) { - if (!pdata->in[i]) + struct s3c24xx_adc_hwmon_incfg *cfg = pdata->in[i]; + + if (!cfg) continue; - if (pdata->in[i]->mult >= 0x10000) + if (cfg->mult >= 0x10000) dev_warn(&dev->dev, "channel %d multiplier too large\n", i); + if (cfg->divider == 0) { + dev_err(&dev->dev, "channel %d divider zero\n", i); + continue; + } + ret = s3c_hwmon_create_attr(&dev->dev, pdata->in[i], &hwmon->attrs[i], i); if (ret) { From cf312e077662ec3a07529551ab6e885828ccfb1d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 16 Nov 2009 12:45:39 +0100 Subject: [PATCH 450/743] hwmon: (adt7475) Fix temperature fault flags The logic of temperature fault flags is wrong, it shows faults when there are none and vice versa. Fix it. I can't believe this has been broken since the driver was added, 8 months ago, basically breaking temp1 and temp3, and nobody ever complained. Signed-off-by: Jean Delvare Acked-by: Hans de Goede Cc: Jordan Crouse --- drivers/hwmon/adt7475.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c index d39877a7da63..d15819b4fe5f 100644 --- a/drivers/hwmon/adt7475.c +++ b/drivers/hwmon/adt7475.c @@ -350,8 +350,7 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr, case FAULT: /* Note - only for remote1 and remote2 */ - out = data->alarms & (sattr->index ? 0x8000 : 0x4000); - out = out ? 0 : 1; + out = !!(data->alarms & (sattr->index ? 0x8000 : 0x4000)); break; default: From 56e35eeebed2dcb4e1a17ad119e039cf095854ac Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 16 Nov 2009 12:45:40 +0100 Subject: [PATCH 451/743] hwmon: (adt7475) Cache limits for 60 seconds The comment says that limits are cached for 60 seconds but the code actually caches them for only 2 seconds. Align the code on the comment, as 60 seconds makes more sense. Signed-off-by: Jean Delvare Acked-by: Hans de Goede Cc: Jordan Crouse --- drivers/hwmon/adt7475.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c index d15819b4fe5f..20579fad4a24 100644 --- a/drivers/hwmon/adt7475.c +++ b/drivers/hwmon/adt7475.c @@ -1151,7 +1151,7 @@ static struct adt7475_data *adt7475_update_device(struct device *dev) } /* Limits and settings, should never change update every 60 seconds */ - if (time_after(jiffies, data->limits_updated + HZ * 2) || + if (time_after(jiffies, data->limits_updated + HZ * 60) || !data->valid) { data->config5 = adt7475_read(REG_CONFIG5); From 84d2a314bbe440d7c2e8636a1923aa3ea1aca51b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 16 Nov 2009 12:45:40 +0100 Subject: [PATCH 452/743] hwmon: (adt7475) Fix sysfs file names The adt7475 driver creates pwm#_auto_channel_temp attributes instead of the standard pwm#_auto_channels_temp. Fix it. Signed-off-by: Jean Delvare Acked-by: Hans de Goede Cc: Jordan Crouse --- drivers/hwmon/adt7475.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c index 20579fad4a24..b5a95193c694 100644 --- a/drivers/hwmon/adt7475.c +++ b/drivers/hwmon/adt7475.c @@ -862,7 +862,7 @@ static SENSOR_DEVICE_ATTR_2(pwm1_freq, S_IRUGO | S_IWUSR, show_pwmfreq, set_pwmfreq, INPUT, 0); static SENSOR_DEVICE_ATTR_2(pwm1_enable, S_IRUGO | S_IWUSR, show_pwmctrl, set_pwmctrl, INPUT, 0); -static SENSOR_DEVICE_ATTR_2(pwm1_auto_channel_temp, S_IRUGO | S_IWUSR, +static SENSOR_DEVICE_ATTR_2(pwm1_auto_channels_temp, S_IRUGO | S_IWUSR, show_pwmchan, set_pwmchan, INPUT, 0); static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm, set_pwm, MIN, 0); @@ -874,7 +874,7 @@ static SENSOR_DEVICE_ATTR_2(pwm2_freq, S_IRUGO | S_IWUSR, show_pwmfreq, set_pwmfreq, INPUT, 1); static SENSOR_DEVICE_ATTR_2(pwm2_enable, S_IRUGO | S_IWUSR, show_pwmctrl, set_pwmctrl, INPUT, 1); -static SENSOR_DEVICE_ATTR_2(pwm2_auto_channel_temp, S_IRUGO | S_IWUSR, +static SENSOR_DEVICE_ATTR_2(pwm2_auto_channels_temp, S_IRUGO | S_IWUSR, show_pwmchan, set_pwmchan, INPUT, 1); static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm, set_pwm, MIN, 1); @@ -886,7 +886,7 @@ static SENSOR_DEVICE_ATTR_2(pwm3_freq, S_IRUGO | S_IWUSR, show_pwmfreq, set_pwmfreq, INPUT, 2); static SENSOR_DEVICE_ATTR_2(pwm3_enable, S_IRUGO | S_IWUSR, show_pwmctrl, set_pwmctrl, INPUT, 2); -static SENSOR_DEVICE_ATTR_2(pwm3_auto_channel_temp, S_IRUGO | S_IWUSR, +static SENSOR_DEVICE_ATTR_2(pwm3_auto_channels_temp, S_IRUGO | S_IWUSR, show_pwmchan, set_pwmchan, INPUT, 2); static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm, set_pwm, MIN, 2); @@ -946,19 +946,19 @@ static struct attribute *adt7475_attrs[] = { &sensor_dev_attr_pwm1.dev_attr.attr, &sensor_dev_attr_pwm1_freq.dev_attr.attr, &sensor_dev_attr_pwm1_enable.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_channel_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, &sensor_dev_attr_pwm2.dev_attr.attr, &sensor_dev_attr_pwm2_freq.dev_attr.attr, &sensor_dev_attr_pwm2_enable.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_channel_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, &sensor_dev_attr_pwm3.dev_attr.attr, &sensor_dev_attr_pwm3_freq.dev_attr.attr, &sensor_dev_attr_pwm3_enable.dev_attr.attr, - &sensor_dev_attr_pwm3_auto_channel_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr, &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, NULL, From 1e0fa6bd8c7468067f2e988c7a416dafd0651c34 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 2 Oct 2009 11:28:18 +0200 Subject: [PATCH 453/743] backlight: lcd - Fix wrong sizeof Which is why I have always preferred sizeof(struct foo) over sizeof(var). Signed-off-by: Jean Delvare Signed-off-by: Richard Purdie --- drivers/video/backlight/lcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c index b6449470106c..a482dd7b0311 100644 --- a/drivers/video/backlight/lcd.c +++ b/drivers/video/backlight/lcd.c @@ -56,7 +56,7 @@ static int fb_notifier_callback(struct notifier_block *self, static int lcd_register_fb(struct lcd_device *ld) { - memset(&ld->fb_notif, 0, sizeof(&ld->fb_notif)); + memset(&ld->fb_notif, 0, sizeof(ld->fb_notif)); ld->fb_notif.notifier_call = fb_notifier_callback; return fb_register_client(&ld->fb_notif); } From 716bdf1874647196ac16dd2a1ad359d88844795a Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Fri, 6 Nov 2009 15:58:31 +0000 Subject: [PATCH 454/743] backlight: Fix backlight limiting on spitz/corgi devices On spitz (& similar) machines, if battery is running low, backlight needs to be limited to lower step. Unfortunately, current code uses &= for limiting, turning backlight off completely for some backlight settings. Fix that. Signed-off-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Richard Purdie --- drivers/video/backlight/corgi_lcd.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c index 2211a852af9c..96774949cd30 100644 --- a/drivers/video/backlight/corgi_lcd.c +++ b/drivers/video/backlight/corgi_lcd.c @@ -433,8 +433,9 @@ static int corgi_bl_update_status(struct backlight_device *bd) if (corgibl_flags & CORGIBL_SUSPENDED) intensity = 0; - if (corgibl_flags & CORGIBL_BATTLOW) - intensity &= lcd->limit_mask; + + if ((corgibl_flags & CORGIBL_BATTLOW) && intensity > lcd->limit_mask) + intensity = lcd->limit_mask; return corgi_bl_set_intensity(lcd, intensity); } From 0b4634fce1f3f7028421630260d54093276db490 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 16 Nov 2009 01:48:32 +0300 Subject: [PATCH 455/743] leds-gpio: fix possible crash on OF device unbinding If there are leds present in the OF tree, but the GPIOs for (some) of them are unavailable, led_data doesn't get populated with correct devices. Then, on device unbinding, one can crash the kernel. Workaround this by setting led->gpio to invalid value early. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Richard Purdie --- drivers/leds/leds-gpio.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index 7467980b8cf9..e5225d28f392 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -78,6 +78,8 @@ static int __devinit create_gpio_led(const struct gpio_led *template, { int ret, state; + led_dat->gpio = -1; + /* skip leds that aren't available */ if (!gpio_is_valid(template->gpio)) { printk(KERN_INFO "Skipping unavailable LED gpio %d (%s)\n", From 80099c707e0915ac3159ddc70fb714adbb3d53e3 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 16 Nov 2009 11:05:03 +0200 Subject: [PATCH 456/743] dereferencing freed memory regulator_fixed_voltage_remove() Don't dereference drvdata after it has been freed. regards, dan carpenter Signed-off-by: Dan Carpenter Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/fixed.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c index f8b295700d7d..f9f516a3028a 100644 --- a/drivers/regulator/fixed.c +++ b/drivers/regulator/fixed.c @@ -196,11 +196,10 @@ static int regulator_fixed_voltage_remove(struct platform_device *pdev) struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev); regulator_unregister(drvdata->dev); - kfree(drvdata->desc.name); - kfree(drvdata); - if (gpio_is_valid(drvdata->gpio)) gpio_free(drvdata->gpio); + kfree(drvdata->desc.name); + kfree(drvdata); return 0; } From 62c5593aea4b71d61dc0f37fea96c556c158a042 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Mon, 16 Nov 2009 21:52:22 +0800 Subject: [PATCH 457/743] crypto: gcm - fix another complete call in complete fuction The flow of the complete function (xxx_done) in gcm.c is as follow: void complete(struct crypto_async_request *areq, int err) { struct aead_request *req = areq->data; if (!err) { err = async_next_step(); if (err == -EINPROGRESS || err == -EBUSY) return; } complete_for_next_step(areq, err); } But *areq may be destroyed in async_next_step(), this makes complete_for_next_step() can not work properly. To fix this, one of following methods is used for each complete function. - Add a __complete() for each complete(), which accept struct aead_request *req instead of areq, so avoid using areq after it is destroyed. - Expand complete_for_next_step(). The fixing method is based on the idea of Herbert Xu. Signed-off-by: Huang Ying Signed-off-by: Herbert Xu --- crypto/gcm.c | 107 +++++++++++++++++++++++++++++++++++---------------- 1 file changed, 73 insertions(+), 34 deletions(-) diff --git a/crypto/gcm.c b/crypto/gcm.c index 5fc3292483ef..c6547130624c 100644 --- a/crypto/gcm.c +++ b/crypto/gcm.c @@ -40,7 +40,7 @@ struct crypto_rfc4106_ctx { struct crypto_gcm_ghash_ctx { unsigned int cryptlen; struct scatterlist *src; - crypto_completion_t complete; + void (*complete)(struct aead_request *req, int err); }; struct crypto_gcm_req_priv_ctx { @@ -267,23 +267,26 @@ static int gcm_hash_final(struct aead_request *req, return crypto_ahash_final(ahreq); } -static void gcm_hash_final_done(struct crypto_async_request *areq, - int err) +static void __gcm_hash_final_done(struct aead_request *req, int err) { - struct aead_request *req = areq->data; struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx; if (!err) crypto_xor(pctx->auth_tag, pctx->iauth_tag, 16); - gctx->complete(areq, err); + gctx->complete(req, err); } -static void gcm_hash_len_done(struct crypto_async_request *areq, - int err) +static void gcm_hash_final_done(struct crypto_async_request *areq, int err) { struct aead_request *req = areq->data; + + __gcm_hash_final_done(req, err); +} + +static void __gcm_hash_len_done(struct aead_request *req, int err) +{ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); if (!err) { @@ -292,13 +295,18 @@ static void gcm_hash_len_done(struct crypto_async_request *areq, return; } - gcm_hash_final_done(areq, err); + __gcm_hash_final_done(req, err); } -static void gcm_hash_crypt_remain_done(struct crypto_async_request *areq, - int err) +static void gcm_hash_len_done(struct crypto_async_request *areq, int err) { struct aead_request *req = areq->data; + + __gcm_hash_len_done(req, err); +} + +static void __gcm_hash_crypt_remain_done(struct aead_request *req, int err) +{ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); if (!err) { @@ -307,13 +315,19 @@ static void gcm_hash_crypt_remain_done(struct crypto_async_request *areq, return; } - gcm_hash_len_done(areq, err); + __gcm_hash_len_done(req, err); } -static void gcm_hash_crypt_done(struct crypto_async_request *areq, - int err) +static void gcm_hash_crypt_remain_done(struct crypto_async_request *areq, + int err) { struct aead_request *req = areq->data; + + __gcm_hash_crypt_remain_done(req, err); +} + +static void __gcm_hash_crypt_done(struct aead_request *req, int err) +{ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx; unsigned int remain; @@ -327,13 +341,18 @@ static void gcm_hash_crypt_done(struct crypto_async_request *areq, return; } - gcm_hash_crypt_remain_done(areq, err); + __gcm_hash_crypt_remain_done(req, err); } -static void gcm_hash_assoc_remain_done(struct crypto_async_request *areq, - int err) +static void gcm_hash_crypt_done(struct crypto_async_request *areq, int err) { struct aead_request *req = areq->data; + + __gcm_hash_crypt_done(req, err); +} + +static void __gcm_hash_assoc_remain_done(struct aead_request *req, int err) +{ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx; crypto_completion_t complete; @@ -350,15 +369,21 @@ static void gcm_hash_assoc_remain_done(struct crypto_async_request *areq, } if (remain) - gcm_hash_crypt_done(areq, err); + __gcm_hash_crypt_done(req, err); else - gcm_hash_crypt_remain_done(areq, err); + __gcm_hash_crypt_remain_done(req, err); } -static void gcm_hash_assoc_done(struct crypto_async_request *areq, - int err) +static void gcm_hash_assoc_remain_done(struct crypto_async_request *areq, + int err) { struct aead_request *req = areq->data; + + __gcm_hash_assoc_remain_done(req, err); +} + +static void __gcm_hash_assoc_done(struct aead_request *req, int err) +{ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); unsigned int remain; @@ -371,13 +396,18 @@ static void gcm_hash_assoc_done(struct crypto_async_request *areq, return; } - gcm_hash_assoc_remain_done(areq, err); + __gcm_hash_assoc_remain_done(req, err); } -static void gcm_hash_init_done(struct crypto_async_request *areq, - int err) +static void gcm_hash_assoc_done(struct crypto_async_request *areq, int err) { struct aead_request *req = areq->data; + + __gcm_hash_assoc_done(req, err); +} + +static void __gcm_hash_init_done(struct aead_request *req, int err) +{ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); crypto_completion_t complete; unsigned int remain = 0; @@ -393,9 +423,16 @@ static void gcm_hash_init_done(struct crypto_async_request *areq, } if (remain) - gcm_hash_assoc_done(areq, err); + __gcm_hash_assoc_done(req, err); else - gcm_hash_assoc_remain_done(areq, err); + __gcm_hash_assoc_remain_done(req, err); +} + +static void gcm_hash_init_done(struct crypto_async_request *areq, int err) +{ + struct aead_request *req = areq->data; + + __gcm_hash_init_done(req, err); } static int gcm_hash(struct aead_request *req, @@ -457,10 +494,8 @@ static void gcm_enc_copy_hash(struct aead_request *req, crypto_aead_authsize(aead), 1); } -static void gcm_enc_hash_done(struct crypto_async_request *areq, - int err) +static void gcm_enc_hash_done(struct aead_request *req, int err) { - struct aead_request *req = areq->data; struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); if (!err) @@ -469,8 +504,7 @@ static void gcm_enc_hash_done(struct crypto_async_request *areq, aead_request_complete(req, err); } -static void gcm_encrypt_done(struct crypto_async_request *areq, - int err) +static void gcm_encrypt_done(struct crypto_async_request *areq, int err) { struct aead_request *req = areq->data; struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); @@ -479,9 +513,13 @@ static void gcm_encrypt_done(struct crypto_async_request *areq, err = gcm_hash(req, pctx); if (err == -EINPROGRESS || err == -EBUSY) return; + else if (!err) { + crypto_xor(pctx->auth_tag, pctx->iauth_tag, 16); + gcm_enc_copy_hash(req, pctx); + } } - gcm_enc_hash_done(areq, err); + aead_request_complete(req, err); } static int crypto_gcm_encrypt(struct aead_request *req) @@ -538,9 +576,8 @@ static void gcm_decrypt_done(struct crypto_async_request *areq, int err) aead_request_complete(req, err); } -static void gcm_dec_hash_done(struct crypto_async_request *areq, int err) +static void gcm_dec_hash_done(struct aead_request *req, int err) { - struct aead_request *req = areq->data; struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); struct ablkcipher_request *abreq = &pctx->u.abreq; struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx; @@ -552,9 +589,11 @@ static void gcm_dec_hash_done(struct crypto_async_request *areq, int err) err = crypto_ablkcipher_decrypt(abreq); if (err == -EINPROGRESS || err == -EBUSY) return; + else if (!err) + err = crypto_gcm_verify(req, pctx); } - gcm_decrypt_done(areq, err); + aead_request_complete(req, err); } static int crypto_gcm_decrypt(struct aead_request *req) From f534dc994397560343be4a3223b9bbaa8e739e1f Mon Sep 17 00:00:00 2001 From: Suresh Jayaraman Date: Mon, 16 Nov 2009 12:03:16 +0530 Subject: [PATCH 458/743] cifs: clear server inode number flag while autodisabling Fix the commit ec06aedd44 that intended to turn off querying for server inode numbers when server doesn't consistently support inode numbers. Presumably the commit didn't actually clear the CIFS_MOUNT_SERVER_INUM flag, perhaps a typo. Signed-off-by: Suresh Jayaraman Acked-by: Jeff Layton Cc: Stable Signed-off-by: Steve French --- fs/cifs/misc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 1e25efcb55c8..d27d4ec6579b 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -720,7 +720,7 @@ void cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb) { if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) { - cifs_sb->mnt_cifs_flags &= CIFS_MOUNT_SERVER_INUM; + cifs_sb->mnt_cifs_flags &= ~CIFS_MOUNT_SERVER_INUM; cERROR(1, ("Autodisabling the use of server inode numbers on " "%s. This server doesn't seem to support them " "properly. Hardlinks will not be recognized on this " From 0f74296a0f818d8ae52d9b77ec531e8dd804dda3 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 20 Oct 2009 16:32:53 +0200 Subject: [PATCH 459/743] at91: at91sam9g20ek modify dual slot evaluation kit at91sam9g20ek rev. C and onwards embed two SD/MMC slots. This patch modify the previous dual slot board definition to match the official rev. C board. It also allows the use of at91_mci SD/MMC driver in addition to the atmel-mci one. Some pins have been re-affected from leds or Ethernet phy IRQ to the SD/MMC slot A. This lead to a modification of those definitions. Signed-off-by: Nicolas Ferre Acked-by: Andrew Victor --- arch/arm/mach-at91/Kconfig | 20 ++++++++-------- .../arm/mach-at91/board-sam9g20ek-2slot-mmc.c | 23 ++++++++++++------- 2 files changed, 26 insertions(+), 17 deletions(-) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index e35d54d43e70..2fd88437348b 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -289,13 +289,6 @@ config MACH_NEOCORE926 help Select this if you are using the Adeneo Neocore 926 board. -config MACH_AT91SAM9G20EK_2MMC - bool "Atmel AT91SAM9G20-EK Evaluation Kit modified for 2 MMC Slots" - depends on ARCH_AT91SAM9G20 - help - Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit - Rev A or B modified for 2 MMC Slots. - endif # ---------------------------------------------------------- @@ -322,7 +315,16 @@ config MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit" depends on ARCH_AT91SAM9G20 help - Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit. + Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit + that embeds only one SD/MMC slot. + +config MACH_AT91SAM9G20EK_2MMC + bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" + depends on ARCH_AT91SAM9G20 + help + Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit + with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and + onwards. config MACH_CPU9G20 bool "Eukrea CPU9G20 board" @@ -392,7 +394,7 @@ config MTD_AT91_DATAFLASH_CARD config MTD_NAND_ATMEL_BUSWIDTH_16 bool "Enable 16-bit data bus interface to NAND flash" - depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK) + depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK) help On AT91SAM926x boards both types of NAND flash can be present (8 and 16 bit data bus width). diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c index a28e53faf71d..a4102d72cc9b 100644 --- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c +++ b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c @@ -90,7 +90,7 @@ static struct at91_udc_data __initdata ek_udc_data = { * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { -#if !defined(CONFIG_MMC_ATMELMCI) +#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91)) { /* DataFlash chip */ .modalias = "mtd_dataflash", .chip_select = 1, @@ -113,7 +113,7 @@ static struct spi_board_info ek_spi_devices[] = { * MACB Ethernet device */ static struct at91_eth_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PC12, + .phy_irq_pin = AT91_PIN_PB0, .is_rmii = 1, }; @@ -194,24 +194,27 @@ static void __init ek_add_device_nand(void) /* * MCI (SD/MMC) - * det_pin and wp_pin are not connected + * wp_pin is not connected */ #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) static struct mci_platform_data __initdata ek_mmc_data = { .slot[0] = { .bus_width = 4, - .detect_pin = -ENODEV, + .detect_pin = AT91_PIN_PC2, .wp_pin = -ENODEV, }, .slot[1] = { .bus_width = 4, - .detect_pin = -ENODEV, + .detect_pin = AT91_PIN_PC9, .wp_pin = -ENODEV, }, }; #else -static struct amci_platform_data __initdata ek_mmc_data = { +static struct at91_mmc_data __initdata ek_mmc_data = { + .slot_b = 1, /* Only one slot so use slot B */ + .wire4 = 1, + .det_pin = AT91_PIN_PC9, }; #endif @@ -221,13 +224,13 @@ static struct amci_platform_data __initdata ek_mmc_data = { static struct gpio_led ek_leds[] = { { /* "bottom" led, green, userled1 to be defined */ .name = "ds5", - .gpio = AT91_PIN_PB12, + .gpio = AT91_PIN_PB8, .active_low = 1, .default_trigger = "none", }, { /* "power" led, yellow */ .name = "ds1", - .gpio = AT91_PIN_PB13, + .gpio = AT91_PIN_PB9, .default_trigger = "heartbeat", } }; @@ -254,7 +257,11 @@ static void __init ek_board_init(void) /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* MMC */ +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) at91_add_device_mci(0, &ek_mmc_data); +#else + at91_add_device_mmc(0, &ek_mmc_data); +#endif /* I2C */ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); /* LEDs */ From 927585f650b51639f0262dad650eafeaf1611197 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 16 Nov 2009 16:13:35 +0000 Subject: [PATCH 460/743] ARM: Fix warning in sa1100-flash.c drivers/mtd/maps/sa1100-flash.c: In function 'sa1100_probe_subdev': drivers/mtd/maps/sa1100-flash.c:214: warning: format '%d' expects type 'int', but argument 3 has type 'uint64_t' Signed-off-by: Russell King --- drivers/mtd/maps/sa1100-flash.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index fdb97f3d30e9..d7a47574d21e 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -209,8 +209,8 @@ static int sa1100_probe_subdev(struct sa_subdev_info *subdev, struct resource *r } subdev->mtd->owner = THIS_MODULE; - printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %dMiB, " - "%d-bit\n", phys, subdev->mtd->size >> 20, + printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %uMiB, %d-bit\n", + phys, (unsigned)(subdev->mtd->size >> 20), subdev->map.bankwidth * 8); return 0; From 378ce74bee4cb0183489bc0f850790a2264ca975 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 14 Nov 2009 01:03:24 +0100 Subject: [PATCH 461/743] ARM: 5787/1: U300 COH 901 331 fixes This will fix some small issues with the COH 901 331 RTC driver: - Interrupt is disabled after alarm so that we don't fire multiple interrupts. - We return 0 from the coh901331_alarm_irq_enable() ridding a compile warning. - We alter the name in the U300 device registry to match that of the driver so they sucessfully resolve. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-u300/core.c | 2 +- drivers/rtc/rtc-coh901331.c | 11 +++++++++++ 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index be60d6deee8b..653e25be3dd8 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -408,7 +408,7 @@ static struct platform_device keypad_device = { }; static struct platform_device rtc_device = { - .name = "rtc0", + .name = "rtc-coh901331", .id = -1, .num_resources = ARRAY_SIZE(rtc_resources), .resource = rtc_resources, diff --git a/drivers/rtc/rtc-coh901331.c b/drivers/rtc/rtc-coh901331.c index 7fe1fa26c52c..03ea530981d1 100644 --- a/drivers/rtc/rtc-coh901331.c +++ b/drivers/rtc/rtc-coh901331.c @@ -58,7 +58,16 @@ static irqreturn_t coh901331_interrupt(int irq, void *data) clk_enable(rtap->clk); /* Ack IRQ */ writel(1, rtap->virtbase + COH901331_IRQ_EVENT); + /* + * Disable the interrupt. This is necessary because + * the RTC lives on a lower-clocked line and will + * not release the IRQ line until after a few (slower) + * clock cycles. The interrupt will be re-enabled when + * a new alarm is set anyway. + */ + writel(0, rtap->virtbase + COH901331_IRQ_MASK); clk_disable(rtap->clk); + /* Set alarm flag */ rtc_update_irq(rtap->rtc, 1, RTC_AF); @@ -128,6 +137,8 @@ static int coh901331_alarm_irq_enable(struct device *dev, unsigned int enabled) else writel(0, rtap->virtbase + COH901331_IRQ_MASK); clk_disable(rtap->clk); + + return 0; } static struct rtc_class_ops coh901331_ops = { From 10d5d99e880692a31ddc59b9f5d063e928fc0c89 Mon Sep 17 00:00:00 2001 From: Paul Parsons Date: Sat, 14 Nov 2009 16:54:12 +0000 Subject: [PATCH 462/743] [ARM] pxa/hx4700: fix hx4700 touchscreen pressure values hx4700 touchscreen events were being dropped in ads7846_rx() because their pressure values consistently exceeded the platform maximum of 512; a sample of 256 pressure values were in the range 531 to 815. Doubling the platform maximum to 1024 allows hx4700 touchscreen events to pass the test. Signed-off-by: Paul Parsons Signed-off-by: Eric Miao --- arch/arm/mach-pxa/hx4700.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index abff9e132749..83bd3c6e3884 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -604,7 +604,7 @@ static struct platform_device gpio_vbus = { static const struct ads7846_platform_data tsc2046_info = { .model = 7846, .vref_delay_usecs = 100, - .pressure_max = 512, + .pressure_max = 1024, .debounce_max = 10, .debounce_tol = 3, .debounce_rep = 1, From 7df56c2586049a06b007474ca059779c81ddb1ff Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 13 Nov 2009 11:37:34 +0100 Subject: [PATCH 463/743] [ARM] pxa: ensure mfp is in correct range in mfp_{read,write} Ensure we do not read/write outside array boundaries with a negative index. Signed-off-by: Roel Kluin Signed-off-by: Eric Miao --- arch/arm/plat-pxa/mfp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index 9405d0379c85..be58f9fe65b0 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c @@ -207,7 +207,7 @@ unsigned long mfp_read(int mfp) { unsigned long val, flags; - BUG_ON(mfp >= MFP_PIN_MAX); + BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX); spin_lock_irqsave(&mfp_spin_lock, flags); val = mfpr_readl(mfp_table[mfp].mfpr_off); @@ -220,7 +220,7 @@ void mfp_write(int mfp, unsigned long val) { unsigned long flags; - BUG_ON(mfp >= MFP_PIN_MAX); + BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX); spin_lock_irqsave(&mfp_spin_lock, flags); mfpr_writel(mfp_table[mfp].mfpr_off, val); From f7343deb0f6e7654c60e97606aea388b9da612c2 Mon Sep 17 00:00:00 2001 From: Vimal Singh Date: Mon, 16 Nov 2009 14:55:59 -0800 Subject: [PATCH 464/743] omap: Fix keymap for zoom2 according to matrix keypad framwork Interpretation of 'row' and 'col' got reversed in matrix keymap framework. Also last element '0', present in keymap array, is no more needed. Correcting zoom2 keyboard keymap accordingly. Signed-off-by: Vimal Singh Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-zoom2.c | 87 +++++++++++++++---------------- 1 file changed, 43 insertions(+), 44 deletions(-) diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index ea00486a5e53..51e0b3ba5f3a 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -30,57 +30,56 @@ /* Zoom2 has Qwerty keyboard*/ static int board_keymap[] = { KEY(0, 0, KEY_E), - KEY(1, 0, KEY_R), - KEY(2, 0, KEY_T), - KEY(3, 0, KEY_HOME), - KEY(6, 0, KEY_I), - KEY(7, 0, KEY_LEFTSHIFT), - KEY(0, 1, KEY_D), + KEY(0, 1, KEY_R), + KEY(0, 2, KEY_T), + KEY(0, 3, KEY_HOME), + KEY(0, 6, KEY_I), + KEY(0, 7, KEY_LEFTSHIFT), + KEY(1, 0, KEY_D), KEY(1, 1, KEY_F), - KEY(2, 1, KEY_G), - KEY(3, 1, KEY_SEND), - KEY(6, 1, KEY_K), - KEY(7, 1, KEY_ENTER), - KEY(0, 2, KEY_X), - KEY(1, 2, KEY_C), + KEY(1, 2, KEY_G), + KEY(1, 3, KEY_SEND), + KEY(1, 6, KEY_K), + KEY(1, 7, KEY_ENTER), + KEY(2, 0, KEY_X), + KEY(2, 1, KEY_C), KEY(2, 2, KEY_V), - KEY(3, 2, KEY_END), - KEY(6, 2, KEY_DOT), - KEY(7, 2, KEY_CAPSLOCK), - KEY(0, 3, KEY_Z), - KEY(1, 3, KEY_KPPLUS), - KEY(2, 3, KEY_B), + KEY(2, 3, KEY_END), + KEY(2, 6, KEY_DOT), + KEY(2, 7, KEY_CAPSLOCK), + KEY(3, 0, KEY_Z), + KEY(3, 1, KEY_KPPLUS), + KEY(3, 2, KEY_B), KEY(3, 3, KEY_F1), - KEY(6, 3, KEY_O), - KEY(7, 3, KEY_SPACE), - KEY(0, 4, KEY_W), - KEY(1, 4, KEY_Y), - KEY(2, 4, KEY_U), - KEY(3, 4, KEY_F2), + KEY(3, 6, KEY_O), + KEY(3, 7, KEY_SPACE), + KEY(4, 0, KEY_W), + KEY(4, 1, KEY_Y), + KEY(4, 2, KEY_U), + KEY(4, 3, KEY_F2), KEY(4, 4, KEY_VOLUMEUP), - KEY(6, 4, KEY_L), - KEY(7, 4, KEY_LEFT), - KEY(0, 5, KEY_S), - KEY(1, 5, KEY_H), - KEY(2, 5, KEY_J), - KEY(3, 5, KEY_F3), + KEY(4, 6, KEY_L), + KEY(4, 7, KEY_LEFT), + KEY(5, 0, KEY_S), + KEY(5, 1, KEY_H), + KEY(5, 2, KEY_J), + KEY(5, 3, KEY_F3), KEY(5, 5, KEY_VOLUMEDOWN), - KEY(6, 5, KEY_M), - KEY(4, 5, KEY_ENTER), - KEY(7, 5, KEY_RIGHT), - KEY(0, 6, KEY_Q), - KEY(1, 6, KEY_A), - KEY(2, 6, KEY_N), - KEY(3, 6, KEY_BACKSPACE), + KEY(5, 6, KEY_M), + KEY(5, 7, KEY_ENTER), + KEY(6, 0, KEY_Q), + KEY(6, 1, KEY_A), + KEY(6, 2, KEY_N), + KEY(6, 3, KEY_BACKSPACE), KEY(6, 6, KEY_P), - KEY(7, 6, KEY_UP), KEY(6, 7, KEY_SELECT), - KEY(7, 7, KEY_DOWN), - KEY(0, 7, KEY_PROG1), /*MACRO 1 */ - KEY(1, 7, KEY_PROG2), /*MACRO 2 */ - KEY(2, 7, KEY_PROG3), /*MACRO 3 */ - KEY(3, 7, KEY_PROG4), /*MACRO 4 */ - 0 + KEY(7, 0, KEY_PROG1), /*MACRO 1 */ + KEY(7, 1, KEY_PROG2), /*MACRO 2 */ + KEY(7, 2, KEY_PROG3), /*MACRO 3 */ + KEY(7, 3, KEY_PROG4), /*MACRO 4 */ + KEY(7, 5, KEY_RIGHT), + KEY(7, 6, KEY_UP), + KEY(7, 7, KEY_DOWN) }; static struct matrix_keymap_data board_map_data = { From 0698989d779a994e1a6ef2f83625276f4dde6eb6 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Mon, 16 Nov 2009 22:12:13 -0800 Subject: [PATCH 465/743] Input: psmouse - fix breakage introduced by b7802c5c1ea Commit b7802c5c1ea ("Input: psmouse - use boolean type") caused the synaptics_hardware variable to be completely useless, as it is constantly set to 'true' throughout the whole psmouse_extensions(). This was caused by the following hunk in the commit in question - int synaptics_hardware = 0; + bool synaptics_hardware = true; which is wrong and causes driver to issue extra reset when falling back to bare PS/2 protocol. Signed-off-by: Jiri Kosina Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/psmouse-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 5bd64841bf1c..07c53798301a 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -581,7 +581,7 @@ static int cortron_detect(struct psmouse *psmouse, bool set_properties) static int psmouse_extensions(struct psmouse *psmouse, unsigned int max_proto, bool set_properties) { - bool synaptics_hardware = true; + bool synaptics_hardware = false; /* * We always check for lifebook because it does not disturb mouse From b1e69aae77d02424ad67f337e40d439313554269 Mon Sep 17 00:00:00 2001 From: Abner Holsinger <9zabner@gmail.com> Date: Mon, 16 Nov 2009 22:12:14 -0800 Subject: [PATCH 466/743] Input: lifebook - fix settings for CF-72 Panasonic CF-72 uses 6-byte protocol and does not need to be tied to a particular port. Signed-off-by: Abner Holsinger <9zabner@gmail.com> Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/lifebook.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index 5e6308694408..82811558ec33 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -107,8 +107,7 @@ static const struct dmi_system_id lifebook_dmi_table[] = { .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "CF-72"), }, - .callback = lifebook_set_serio_phys, - .driver_data = "isa0060/serio3", + .callback = lifebook_set_6byte_proto, }, { .ident = "Lifebook B142", From c0e1f68bce454d244e2eea6b0ab7b3a217c673d2 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Tue, 10 Nov 2009 08:37:47 +0000 Subject: [PATCH 467/743] ixgbe: Fixing EEH handler to handle more than one error After commmit 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff EEH breaks after the second error, since it calls pci_restore_state() but it returns 0, since pci->state_saved is false. So, this patch just call pci_save_state() after pci_restore_state(). Signed-off-by: Breno Leitao Acked-by: Peter P Waskiewicz Jr Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 5bd9e6bf6f2f..a5036f7c1923 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -5994,6 +5994,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev) } else { pci_set_master(pdev); pci_restore_state(pdev); + pci_save_state(pdev); pci_wake_from_d3(pdev, false); From 82b3cc1a2f5e46300a9dec4a8cc8106dc20a4c23 Mon Sep 17 00:00:00 2001 From: Ben McKeegan Date: Mon, 16 Nov 2009 03:44:25 +0000 Subject: [PATCH 468/743] ppp: fix BUG on non-linear SKB (multilink receive) PPP does not correctly call pskb_may_pull() on all necessary receive paths before reading the PPP protocol, thus causing PPP to report seemingly random 'unsupported protocols' and eventually trigger BUG_ON(skb->len < skb->data_len) in skb_pull_rcsum() when receiving multilink protocol in non-linear skbs. ppp_receive_nonmp_frame() does not call pskb_may_pull() before reading the protocol number. For the non-mp receive path this is not a problem, as this check is done in ppp_receive_frame(). For the mp receive path, ppp_mp_reconstruct() usually copies the data into a new linear skb. However, in the case where the frame is made up of a single mp fragment, the mp header is pulled and the existing skb used. This skb was then passed to ppp_receive_nonmp_frame() without checking if the encapsulated protocol header could safely be read. Signed-off-by: Ben McKeegan Signed-off-by: David S. Miller --- drivers/net/ppp_generic.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 9bf2a6be9031..965adb6174c3 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -1944,8 +1944,15 @@ ppp_receive_mp_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) } /* Pull completed packets off the queue and receive them. */ - while ((skb = ppp_mp_reconstruct(ppp))) - ppp_receive_nonmp_frame(ppp, skb); + while ((skb = ppp_mp_reconstruct(ppp))) { + if (pskb_may_pull(skb, 2)) + ppp_receive_nonmp_frame(ppp, skb); + else { + ++ppp->dev->stats.rx_length_errors; + kfree_skb(skb); + ppp_receive_error(ppp); + } + } return; From f99b4a02848afe7fae960884dfa6e7a88f545f09 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 16 Nov 2009 22:47:33 +0000 Subject: [PATCH 469/743] net: fix mdio section mismatch warning This fixes the following warning: WARNING: drivers/net/phy/built-in.o(.devexit.text+0x70): Section mismatch in reference from the function .mdio_gpio_bus_destroy() to the function .devinit.text:.mdio_gpio_bus_deinit() The function __devexit .mdio_gpio_bus_destroy() references a function __devinit .mdio_gpio_bus_deinit(). This is often seen when error handling in the exit function uses functionality in the init path. The fix is often to remove the __devinit annotation of .mdio_gpio_bus_deinit() so it may be used outside an init section. Signed-off-by: Stephen Rothwell Signed-off-by: David S. Miller --- drivers/net/phy/mdio-gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 8659d341e769..35897134a5dd 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -139,7 +139,7 @@ out: return NULL; } -static void __devinit mdio_gpio_bus_deinit(struct device *dev) +static void mdio_gpio_bus_deinit(struct device *dev) { struct mii_bus *bus = dev_get_drvdata(dev); struct mdio_gpio_info *bitbang = bus->priv; From e54d5512b600aa0d492010436ff7eb0c9194efc1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 17 Nov 2009 04:46:18 -0800 Subject: [PATCH 470/743] sungem: Fix Serdes detection. We need to look for the 'shared-pins' property to get this right. Based upon a patch by Hermann Lauer. Signed-off-by: David S. Miller --- drivers/net/sungem.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 305ec3d783db..1927b3de9eec 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -2062,7 +2062,15 @@ static int gem_check_invariants(struct gem *gp) mif_cfg &= ~MIF_CFG_PSELECT; writel(mif_cfg, gp->regs + MIF_CFG); } else { - gp->phy_type = phy_serialink; +#ifdef CONFIG_SPARC + const char *p; + + p = of_get_property(gp->of_node, "shared-pins", NULL); + if (p && !strcmp(p, "serdes")) + gp->phy_type = phy_serdes; + else +#endif + gp->phy_type = phy_serialink; } if (gp->phy_type == phy_mii_mdio1 || gp->phy_type == phy_mii_mdio0) { From 69c0cab120a85471054614418b447349caba22d7 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 17 Nov 2009 05:18:18 -0800 Subject: [PATCH 471/743] gro: Fix illegal merging of trailer trash When we've merged skb's with page frags, and subsequently receive a trailer skb (< MSS) that is not completely non-linear (this can occur on Intel NICs if the packet size falls below the threshold), GRO ends up producing an illegal GSO skb with a frag_list. This is harmless unless the skb is then forwarded through an interface that requires software GSO, whereupon the GSO code will BUG. This patch detects this case in GRO and avoids merging the trailer skb. Reported-by: Mark Wagner Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/skbuff.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 80a96166df39..ec85681a7dd8 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2701,7 +2701,8 @@ int skb_gro_receive(struct sk_buff **head, struct sk_buff *skb) NAPI_GRO_CB(skb)->free = 1; goto done; - } + } else if (skb_gro_len(p) != pinfo->gso_size) + return -E2BIG; headroom = skb_headroom(p); nskb = netdev_alloc_skb(p->dev, headroom + skb_gro_offset(p)); From 6b863d1d3239eff0f45c2e6e672f5b56db828db0 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 17 Nov 2009 06:45:04 -0800 Subject: [PATCH 472/743] vlan: Fix register_vlan_dev() error path In case register_netdevice() returns an error, and a new vlan_group was allocated and inserted in vlan_group_hash[] we call vlan_group_free() without deleting group from hash table. Future lookups can give infinite loops or crashes. We must delete the vlan_group using RCU safe procedure. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/8021q/vlan.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 8836575f9d79..a29c5ab5815c 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -281,8 +281,11 @@ out_uninit_applicant: if (ngrp) vlan_gvrp_uninit_applicant(real_dev); out_free_group: - if (ngrp) - vlan_group_free(ngrp); + if (ngrp) { + hlist_del_rcu(&ngrp->hlist); + /* Free the group, after all cpu's are done. */ + call_rcu(&ngrp->rcu, vlan_rcu_free); + } return err; } From 0c3cee57efcb1c79d62b1238c0d22afef4599247 Mon Sep 17 00:00:00 2001 From: Javier Kohen Date: Tue, 17 Nov 2009 15:36:13 +0100 Subject: [PATCH 473/743] ALSA: usb - Quirk to disable master volume control in PCM2702 Disable the master volume control in the PCM2702 chipset. The datasheet documents two independent channel volume controls, one master mute control and one master volume control. All controls are fully functional except for the master volume control, which returns USB stalls on all GET requests. Signed-off-by: Javier Kohen Signed-off-by: Takashi Iwai --- sound/usb/usbmixer.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c index 9efcfd08d747..c998220b99c6 100644 --- a/sound/usb/usbmixer.c +++ b/sound/usb/usbmixer.c @@ -1071,6 +1071,15 @@ static int parse_audio_feature_unit(struct mixer_build *state, int unitid, unsig channels = (ftr[0] - 7) / csize - 1; master_bits = snd_usb_combine_bytes(ftr + 6, csize); + /* master configuration quirks */ + switch (state->chip->usb_id) { + case USB_ID(0x08bb, 0x2702): + snd_printk(KERN_INFO + "usbmixer: master volume quirk for PCM2702 chip\n"); + /* disable non-functional volume control */ + master_bits &= ~(1 << (USB_FEATURE_VOLUME - 1)); + break; + } if (channels > 0) first_ch_bits = snd_usb_combine_bytes(ftr + 6 + csize, csize); else From 12929baea4b29d70525f764034b3dac771dd69e5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 17 Nov 2009 15:58:35 +0100 Subject: [PATCH 474/743] ALSA: hda - Fix quirk for VAIO type G Vaio type G laptop doesn't work with the current quirk setup. After some tests, it turned out that it should be model=auto as default. Reported-by: Mattia Dongili Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 84a52efdb2d6..70583719282b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -11462,6 +11462,7 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = { SND_PCI_QUIRK(0x104d, 0x9016, "Sony VAIO", ALC262_AUTO), /* dig-only */ SND_PCI_QUIRK(0x104d, 0x9025, "Sony VAIO Z21MN", ALC262_TOSHIBA_S06), SND_PCI_QUIRK(0x104d, 0x9035, "Sony VAIO VGN-FW170J", ALC262_AUTO), + SND_PCI_QUIRK(0x104d, 0x9047, "Sony VAIO Type G", ALC262_AUTO), SND_PCI_QUIRK_MASK(0x104d, 0xff00, 0x9000, "Sony VAIO", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1", From 8ec6dba2581754e375be66f7bedd708d856d8b30 Mon Sep 17 00:00:00 2001 From: Jan Rekorajski Date: Mon, 16 Nov 2009 11:57:02 +0000 Subject: [PATCH 475/743] XFS bug in log recover with quota (bugzilla id 855) Hi, I was hit by a bug in linux 2.6.31 when XFS is not able to recover the log after a crash if fs was mounted with quotas. Gory details in XFS bugzilla: http://oss.sgi.com/bugzilla/show_bug.cgi?id=855. It looks like wrong struct is used in buffer length check, and the following patch should fix the problem. xfs_dqblk_t has a size of 104+32 bytes, while xfs_disk_dquot_t is 104 bytes long, and this is exactly what I see in system logs - "XFS: dquot too small (104) in xlog_recover_do_dquot_trans." Signed-off-by: Jan Rekorajski Reviewed-by: Christoph Hellwig Signed-off-by: Alex Elder --- fs/xfs/xfs_log_recover.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 1099395d7d6c..fb17f8226b09 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1980,7 +1980,7 @@ xlog_recover_do_reg_buffer( "XFS: NULL dquot in %s.", __func__); goto next; } - if (item->ri_buf[i].i_len < sizeof(xfs_dqblk_t)) { + if (item->ri_buf[i].i_len < sizeof(xfs_disk_dquot_t)) { cmn_err(CE_ALERT, "XFS: dquot too small (%d) in %s.", item->ri_buf[i].i_len, __func__); @@ -2635,7 +2635,7 @@ xlog_recover_do_dquot_trans( "XFS: NULL dquot in %s.", __func__); return XFS_ERROR(EIO); } - if (item->ri_buf[1].i_len < sizeof(xfs_dqblk_t)) { + if (item->ri_buf[1].i_len < sizeof(xfs_disk_dquot_t)) { cmn_err(CE_ALERT, "XFS: dquot too small (%d) in %s.", item->ri_buf[1].i_len, __func__); From 6c06f072c2d797ddbb2270363de97c53ebbe0385 Mon Sep 17 00:00:00 2001 From: "Nathaniel W. Turner" Date: Mon, 16 Nov 2009 19:51:48 +0000 Subject: [PATCH 476/743] xfs: copy li_lsn before dropping AIL lock Access to log items on the AIL is generally protected by m_ail_lock; this is particularly needed when we're getting or setting the 64-bit li_lsn on a 32-bit platform. This patch fixes a couple places where we were accessing the log item after dropping the AIL lock on 32-bit machines. This can result in a partially-zeroed log->l_tail_lsn if xfs_trans_ail_delete is racing with xfs_trans_ail_update, and in at least some cases, this can leave the l_tail_lsn with a zero cycle number, which means xlog_space_left will think the log is full (unless CONFIG_XFS_DEBUG is set, in which case we'll trip an ASSERT), leading to processes stuck forever in xlog_grant_log_space. Thanks to Adrian VanderSpek for first spotting the race potential and to Dave Chinner for debug assistance. Signed-off-by: Nathaniel W. Turner Reviewed-by: Christoph Hellwig Signed-off-by: Alex Elder --- fs/xfs/xfs_trans_ail.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/fs/xfs/xfs_trans_ail.c b/fs/xfs/xfs_trans_ail.c index f31271c30de9..2ffc570679be 100644 --- a/fs/xfs/xfs_trans_ail.c +++ b/fs/xfs/xfs_trans_ail.c @@ -467,6 +467,7 @@ xfs_trans_ail_update( { xfs_log_item_t *dlip = NULL; xfs_log_item_t *mlip; /* ptr to minimum lip */ + xfs_lsn_t tail_lsn; mlip = xfs_ail_min(ailp); @@ -483,8 +484,16 @@ xfs_trans_ail_update( if (mlip == dlip) { mlip = xfs_ail_min(ailp); + /* + * It is not safe to access mlip after the AIL lock is + * dropped, so we must get a copy of li_lsn before we do + * so. This is especially important on 32-bit platforms + * where accessing and updating 64-bit values like li_lsn + * is not atomic. + */ + tail_lsn = mlip->li_lsn; spin_unlock(&ailp->xa_lock); - xfs_log_move_tail(ailp->xa_mount, mlip->li_lsn); + xfs_log_move_tail(ailp->xa_mount, tail_lsn); } else { spin_unlock(&ailp->xa_lock); } @@ -514,6 +523,7 @@ xfs_trans_ail_delete( { xfs_log_item_t *dlip; xfs_log_item_t *mlip; + xfs_lsn_t tail_lsn; if (lip->li_flags & XFS_LI_IN_AIL) { mlip = xfs_ail_min(ailp); @@ -527,9 +537,16 @@ xfs_trans_ail_delete( if (mlip == dlip) { mlip = xfs_ail_min(ailp); + /* + * It is not safe to access mlip after the AIL lock + * is dropped, so we must get a copy of li_lsn + * before we do so. This is especially important + * on 32-bit platforms where accessing and updating + * 64-bit values like li_lsn is not atomic. + */ + tail_lsn = mlip ? mlip->li_lsn : 0; spin_unlock(&ailp->xa_lock); - xfs_log_move_tail(ailp->xa_mount, - (mlip ? mlip->li_lsn : 0)); + xfs_log_move_tail(ailp->xa_mount, tail_lsn); } else { spin_unlock(&ailp->xa_lock); } From a08e37f31aa2800e0c9d20e1fc9283a06901cac2 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Sat, 14 Nov 2009 20:45:06 +1100 Subject: [PATCH 477/743] fcntl: Use consistent values for F_[GS]ETOWN_EX These values were only introduced during this release cycle, so it is still early enough to get them right. alpha uses the same values that are in asm-generic/fcntl.h, so just remove them. parisc uses the values interchanged for no apparent reason, so remove them to give us consistency across all architectures. Signed-off-by: Stephen Rothwell Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/fcntl.h | 2 -- arch/parisc/include/asm/fcntl.h | 2 -- 2 files changed, 4 deletions(-) diff --git a/arch/alpha/include/asm/fcntl.h b/arch/alpha/include/asm/fcntl.h index 73126e4dd639..25da0017ec87 100644 --- a/arch/alpha/include/asm/fcntl.h +++ b/arch/alpha/include/asm/fcntl.h @@ -26,8 +26,6 @@ #define F_GETOWN 6 /* for sockets. */ #define F_SETSIG 10 /* for sockets. */ #define F_GETSIG 11 /* for sockets. */ -#define F_SETOWN_EX 15 -#define F_GETOWN_EX 16 /* for posix fcntl() and lockf() */ #define F_RDLCK 1 diff --git a/arch/parisc/include/asm/fcntl.h b/arch/parisc/include/asm/fcntl.h index 5f39d5597ced..1e1c824764ee 100644 --- a/arch/parisc/include/asm/fcntl.h +++ b/arch/parisc/include/asm/fcntl.h @@ -28,8 +28,6 @@ #define F_SETOWN 12 /* for sockets. */ #define F_SETSIG 13 /* for sockets. */ #define F_GETSIG 14 /* for sockets. */ -#define F_GETOWN_EX 15 -#define F_SETOWN_EX 16 /* for posix fcntl() and lockf() */ #define F_RDLCK 01 From e22dde9904c2d26a522f1a2b89854a8238bf0933 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 17 Nov 2009 11:34:31 -0700 Subject: [PATCH 478/743] ioat: silence "dca disabled" messages Turning off dca is not an "error", and the dca-enabled state can be viewed from sysfs. Signed-off-by: Dan Williams --- drivers/dma/ioat/dca.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/ioat/dca.c b/drivers/dma/ioat/dca.c index 69d02615c4d6..14f0a782df44 100644 --- a/drivers/dma/ioat/dca.c +++ b/drivers/dma/ioat/dca.c @@ -98,7 +98,7 @@ static int dca_enabled_in_bios(struct pci_dev *pdev) cpuid_level_9 = cpuid_eax(9); res = test_bit(0, &cpuid_level_9); if (!res) - dev_err(&pdev->dev, "DCA is disabled in BIOS\n"); + dev_dbg(&pdev->dev, "DCA is disabled in BIOS\n"); return res; } @@ -108,7 +108,7 @@ static int system_has_dca_enabled(struct pci_dev *pdev) if (boot_cpu_has(X86_FEATURE_DCA)) return dca_enabled_in_bios(pdev); - dev_err(&pdev->dev, "boot cpu doesn't have X86_FEATURE_DCA\n"); + dev_dbg(&pdev->dev, "boot cpu doesn't have X86_FEATURE_DCA\n"); return 0; } From 9346f48b26a4b48a7d56314bbb94e6b801e28316 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Mon, 16 Nov 2009 13:36:53 +0000 Subject: [PATCH 479/743] omap3: clock: Fix the DPLL freqsel computations Fix the freqsel value computation. Use n instead of (n+1) The formula in the TRM uses a zero-based N, hence the (n+1); however at this point in the clock34xx.c code, N is one-based. Hayati Bayrakdar and Nishanth Menon helped track down this bug. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley [paul@pwsan.com: modified commit message] Cc: Hayati Bayrakdar Cc: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock34xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 489556eecbd1..7c5c00df3c70 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -473,7 +473,7 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n) unsigned long fint; u16 f = 0; - fint = clk->dpll_data->clk_ref->rate / (n + 1); + fint = clk->dpll_data->clk_ref->rate / n; pr_debug("clock: fint is %lu\n", fint); From 72f962fc7bc00f5ff4991912b889f87b464f7f1a Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 16 Nov 2009 13:36:54 +0000 Subject: [PATCH 480/743] omap3: clock: Fixed dpll3_m2x2 rate calculation Current calculation does not take into account any changes to M2 divisor, and thus when we change VDD2 OPP, dpll3_m2x2 rate does not change. Fixed by re-routing dpll3_m2x2 parent to dpll3_m2. Signed-off-by: Tero Kristo Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock34xx.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index c8119781e00a..9565c05bebd2 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -489,9 +489,9 @@ static struct clk core_ck = { static struct clk dpll3_m2x2_ck = { .name = "dpll3_m2x2_ck", .ops = &clkops_null, - .parent = &dpll3_x2_ck, + .parent = &dpll3_m2_ck, .clkdm_name = "dpll3_clkdm", - .recalc = &followparent_recalc, + .recalc = &omap3_clkoutx2_recalc, }; /* The PWRDN bit is apparently only available on 3430ES2 and above */ From 4175f3e31cc7157669aa66d46dc79de6ae0126ce Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 28 Oct 2009 21:12:32 +0100 Subject: [PATCH 481/743] tty_port: If we are opened non blocking we still need to raise the carrier Original discussion: http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248 or http://marc.info/?l=linux-usb&m=125553790714133&w=2 The tty_port code inherited a bug common to various drivers it was based upon. If the tty is opened O_NONBLOCK we do not wait for the carrier to be raised but we must still raise our modem lines if appropriate. (There is a second question here about whether we should do so if CLOCAL is set but that can wait) Signed-off-by: Alan Cox Reported-by: Karl Hiramoto Tested-by: Karl Hiramoto Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/char/tty_port.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index a4bbb28f10be..2e8552dc5eda 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -221,6 +221,9 @@ int tty_port_block_til_ready(struct tty_port *port, the port has just hung up or is in another error state */ if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { + /* Indicate we are open */ + if (tty->termios->c_cflag & CBAUD) + tty_port_raise_dtr_rts(port); port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } From d94c7bd4c1361cab58a21d530078c5673863dcc2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 28 Oct 2009 21:12:33 +0100 Subject: [PATCH 482/743] tty: cp210x: Fix carrier handling Original discussion: http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248 or http://marc.info/?l=linux-usb&m=125553790714133&w=2 9a68e39d4a701fb3be03cae9b462408664ebd205 broke carrier handling so that a cp210x setup which needed the carrier lines set up (non CLOCAL) which did not make a call which set the termios bits left the lines down even if CLOCAL was not asserted. Fix this not by reverting but by adding the proper dtr_rts and carrier_raised methods. This both sets the modem lines properly and also implements the correct blocking semantics for the port as required by POSIX. Signed-off-by: Alan Cox Reported-by: Karl Hiramoto Tested-by: Karl Hiramoto Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 698252a4dc5d..bd254ec97d14 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -50,6 +50,8 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *, static void cp210x_break_ctl(struct tty_struct *, int); static int cp210x_startup(struct usb_serial *); static void cp210x_disconnect(struct usb_serial *); +static void cp210x_dtr_rts(struct usb_serial_port *p, int on); +static int cp210x_carrier_raised(struct usb_serial_port *p); static int debug; @@ -143,6 +145,8 @@ static struct usb_serial_driver cp210x_device = { .tiocmset = cp210x_tiocmset, .attach = cp210x_startup, .disconnect = cp210x_disconnect, + .dtr_rts = cp210x_dtr_rts, + .carrier_raised = cp210x_carrier_raised }; /* Config request types */ @@ -746,6 +750,14 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file, return cp210x_set_config(port, CP210X_SET_MHS, &control, 2); } +static void cp210x_dtr_rts(struct usb_serial_port *p, int on) +{ + if (on) + cp210x_tiocmset_port(p, NULL, TIOCM_DTR|TIOCM_RTS, 0); + else + cp210x_tiocmset_port(p, NULL, 0, TIOCM_DTR|TIOCM_RTS); +} + static int cp210x_tiocmget (struct tty_struct *tty, struct file *file) { struct usb_serial_port *port = tty->driver_data; @@ -768,6 +780,15 @@ static int cp210x_tiocmget (struct tty_struct *tty, struct file *file) return result; } +static int cp210x_carrier_raised(struct usb_serial_port *p) +{ + unsigned int control; + cp210x_get_config(p, CP210X_GET_MDMSTS, &control, 1); + if (control & CONTROL_DCD) + return 1; + return 0; +} + static void cp210x_break_ctl (struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; From a1f17a872bc7b1cb7efdd5486a2963e88a536e61 Mon Sep 17 00:00:00 2001 From: Libin Yang Date: Wed, 4 Nov 2009 14:55:18 +0800 Subject: [PATCH 483/743] USB: ohci: quirk AMD prefetch for USB 1.1 ISO transfer The following patch in the driver is required to avoid USB 1.1 device failures that may occur due to requests from USB OHCI controllers may be overwritten if the latency for any pending request by the USB controller is very long (in the range of milliseconds). Signed-off-by: Libin Yang Cc: David Brownell Cc: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hcd.c | 5 +++++ drivers/usb/host/ohci-pci.c | 20 ++++++++++++++++++++ drivers/usb/host/ohci-q.c | 18 ++++++++++++------ drivers/usb/host/ohci.h | 9 +++++++++ 4 files changed, 46 insertions(+), 6 deletions(-) diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 78bb7710f36d..24eb74781919 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -87,6 +87,7 @@ static int ohci_restart (struct ohci_hcd *ohci); #ifdef CONFIG_PCI static void quirk_amd_pll(int state); static void amd_iso_dev_put(void); +static void sb800_prefetch(struct ohci_hcd *ohci, int on); #else static inline void quirk_amd_pll(int state) { @@ -96,6 +97,10 @@ static inline void amd_iso_dev_put(void) { return; } +static inline void sb800_prefetch(struct ohci_hcd *ohci, int on) +{ + return; +} #endif diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index d2ba04dd785e..b8a1148f248e 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -177,6 +177,13 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd) return 0; pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); + + /* SB800 needs pre-fetch fix */ + if ((rev >= 0x40) && (rev <= 0x4f)) { + ohci->flags |= OHCI_QUIRK_AMD_PREFETCH; + ohci_dbg(ohci, "enabled AMD prefetch quirk\n"); + } + if ((rev > 0x3b) || (rev < 0x30)) { pci_dev_put(amd_smbus_dev); amd_smbus_dev = NULL; @@ -262,6 +269,19 @@ static void amd_iso_dev_put(void) } +static void sb800_prefetch(struct ohci_hcd *ohci, int on) +{ + struct pci_dev *pdev; + u16 misc; + + pdev = to_pci_dev(ohci_to_hcd(ohci)->self.controller); + pci_read_config_word(pdev, 0x50, &misc); + if (on == 0) + pci_write_config_word(pdev, 0x50, misc & 0xfcff); + else + pci_write_config_word(pdev, 0x50, misc | 0x0300); +} + /* List of quirks for OHCI */ static const struct pci_device_id ohci_pci_quirks[] = { { diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index 16fecb8ecc39..35288bcae0db 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -49,9 +49,12 @@ __acquires(ohci->lock) switch (usb_pipetype (urb->pipe)) { case PIPE_ISOCHRONOUS: ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs--; - if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0 - && quirk_amdiso(ohci)) - quirk_amd_pll(1); + if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) { + if (quirk_amdiso(ohci)) + quirk_amd_pll(1); + if (quirk_amdprefetch(ohci)) + sb800_prefetch(ohci, 0); + } break; case PIPE_INTERRUPT: ohci_to_hcd(ohci)->self.bandwidth_int_reqs--; @@ -680,9 +683,12 @@ static void td_submit_urb ( data + urb->iso_frame_desc [cnt].offset, urb->iso_frame_desc [cnt].length, urb, cnt); } - if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0 - && quirk_amdiso(ohci)) - quirk_amd_pll(0); + if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) { + if (quirk_amdiso(ohci)) + quirk_amd_pll(0); + if (quirk_amdprefetch(ohci)) + sb800_prefetch(ohci, 1); + } periodic = ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs++ == 0 && ohci_to_hcd(ohci)->self.bandwidth_int_reqs == 0; break; diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 222011f6172c..5bf15fed0d9f 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -402,6 +402,7 @@ struct ohci_hcd { #define OHCI_QUIRK_FRAME_NO 0x80 /* no big endian frame_no shift */ #define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */ #define OHCI_QUIRK_AMD_ISO 0x200 /* ISO transfers*/ +#define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */ // there are also chip quirks/bugs in init logic struct work_struct nec_work; /* Worker for NEC quirk */ @@ -433,6 +434,10 @@ static inline int quirk_amdiso(struct ohci_hcd *ohci) { return ohci->flags & OHCI_QUIRK_AMD_ISO; } +static inline int quirk_amdprefetch(struct ohci_hcd *ohci) +{ + return ohci->flags & OHCI_QUIRK_AMD_PREFETCH; +} #else static inline int quirk_nec(struct ohci_hcd *ohci) { @@ -446,6 +451,10 @@ static inline int quirk_amdiso(struct ohci_hcd *ohci) { return 0; } +static inline int quirk_amdprefetch(struct ohci_hcd *ohci) +{ + return 0; +} #endif /* convert between an hcd pointer and the corresponding ohci_hcd */ From 18a77b5d237a67d2c621a46f5271a3b51da1b380 Mon Sep 17 00:00:00 2001 From: Henry Gebhardt Date: Wed, 4 Nov 2009 11:19:28 +0100 Subject: [PATCH 484/743] USB: cdc_acm: Fix race condition when opening tty If acm_rx_tasklet() gets called before tty_port_block_til_ready() returns, then bulk IN urbs may not be sent. This fixes it. Signed-off-by: Henry Gebhardt Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index e3861b21e776..b72fa49eb257 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -609,9 +609,9 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) acm->throttle = 0; - tasklet_schedule(&acm->urb_task); set_bit(ASYNCB_INITIALIZED, &acm->port.flags); rv = tty_port_block_til_ready(&acm->port, tty, filp); + tasklet_schedule(&acm->urb_task); done: mutex_unlock(&acm->mutex); err_out: From 051522bb47797f7168a617a0752d7ddc1a2f6f24 Mon Sep 17 00:00:00 2001 From: Francesco Lavra Date: Tue, 3 Nov 2009 10:53:07 +0000 Subject: [PATCH 485/743] USB: cdc_acm: Fix memory leak after hangup Am Donnerstag, 10. September 2009 15:43:53 schrieb Dietmar Hilbrich: > Hello, > > i have the following problem with the cdc-acm - driver: > > I'm using the driver with an "Ericsson F3507G" on a Thinkpad T400. > > If a disable the device (with the RFKill-Switch) while it is used by a > programm like ppp, the driver doesn't seem to correctly clean up the tty, > even after the program has been closed) > > The tty is still active (e.g. there still exists an entry in > /sys/dev/char/166:0 if ttyACM0 was used) and if a reacticate the device, > this device entry will be skipped and the Device-Nodes ttyACM1, ttyACM2 > and ttyACM3 will be used. > > This problem was introduced with the commit > 10077d4a6674f535abdbe25cdecb1202af7948f1 (before 2.6.31-rc1) and still > exists in 2.6.31. > > I was able the fix this problem with the following patch: > > diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c > index 2bfc41e..0970d2f 100644 > --- a/drivers/usb/class/cdc-acm.c > +++ b/drivers/usb/class/cdc-acm.c > @@ -676,6 +676,7 @@ static void acm_tty_hangup(struct tty_struct *tty) > struct acm *acm = tty->driver_data; > tty_port_hangup(&acm->port); > acm_port_down(acm, 0); > + acm_tty_unregister(acm); > } I have the same problem with cdc-acm (I'm using a Samsung SGH-U900): when I unplug it from the USB port during a PPP connection, the ppp daemon gets the hangup correctly (and closes the device), but the struct acm corresponding to the device disconnected is not freed. Hence reconnecting the device results in creation of /dev/ttyACM(x+1). The same happens when the system is hibernated during a PPP connection. This memory leak is due to the fact that when the tty is hung up, tty_port_close_start() returns always zero, and acm_tty_close() never reaches the point where acm_tty_unregister() is called. Here is a fix for this. Signed-off-by: Francesco Lavra Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index b72fa49eb257..e4eca7810bcf 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -686,15 +686,21 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) /* Perform the closing process and see if we need to do the hardware shutdown */ - if (!acm || tty_port_close_start(&acm->port, tty, filp) == 0) + if (!acm) return; + if (tty_port_close_start(&acm->port, tty, filp) == 0) { + mutex_lock(&open_mutex); + if (!acm->dev) { + tty_port_tty_set(&acm->port, NULL); + acm_tty_unregister(acm); + tty->driver_data = NULL; + } + mutex_unlock(&open_mutex); + return; + } acm_port_down(acm, 0); tty_port_close_end(&acm->port, tty); - mutex_lock(&open_mutex); tty_port_tty_set(&acm->port, NULL); - if (!acm->dev) - acm_tty_unregister(acm); - mutex_unlock(&open_mutex); } static int acm_tty_write(struct tty_struct *tty, From d94c05e33d9212ee67b8d4998f984cc71df8168b Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 3 Nov 2009 22:02:22 -0800 Subject: [PATCH 486/743] USB: xhci: Fix bug memory free after failed initialization. If the xHCI driver fails during the memory initialization, xhci->ir_set may not be a valid pointer. Check that it points to valid DMA'able memory before writing to that address during the memory freeing process. Signed-off-by: Sarah Sharp Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 1db4fea8c170..732580c6cbea 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -802,9 +802,11 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) int i; /* Free the Event Ring Segment Table and the actual Event Ring */ - xhci_writel(xhci, 0, &xhci->ir_set->erst_size); - xhci_write_64(xhci, 0, &xhci->ir_set->erst_base); - xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue); + if (xhci->ir_set) { + xhci_writel(xhci, 0, &xhci->ir_set->erst_size); + xhci_write_64(xhci, 0, &xhci->ir_set->erst_base); + xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue); + } size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); if (xhci->erst.entries) pci_free_consistent(pdev, size, From 2fa88daa6f299bfb83672c3b525d786ad03b4735 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 3 Nov 2009 22:02:24 -0800 Subject: [PATCH 487/743] USB: xhci: Fix TRB physical to virtual address translation. The trb_in_td() function in the xHCI driver is supposed to translate a physical transfer buffer request (TRB) into a virtual pointer to the ring segment that TRB is in. Unfortunately, a mistake in this function may cause endless loops as the driver searches through the linked list of ring segments over and over again. Fix a couple bugs that may lead to loops or bad output: 1. Bail out if we get a NULL pointer when translating the segment's private structure and the starting DMA address of the segment chunk. If this happens, we've been handed a starting TRB pointer from a different ring. 2. Make sure the function works when there's multiple segments in the ring. In the while loop to search through the ring segments, use the current segment variable (cur_seg), rather than the starting segment variable (start_seg) that is passed in. 3. Stop searching the ring if we've run through all the segments in the ring. Signed-off-by: Sarah Sharp Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 173c39c76489..821b7b4709de 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -864,9 +864,11 @@ static struct xhci_segment *trb_in_td( cur_seg = start_seg; do { + if (start_dma == 0) + return 0; /* We may get an event for a Link TRB in the middle of a TD */ end_seg_dma = xhci_trb_virt_to_dma(cur_seg, - &start_seg->trbs[TRBS_PER_SEGMENT - 1]); + &cur_seg->trbs[TRBS_PER_SEGMENT - 1]); /* If the end TRB isn't in this segment, this is set to 0 */ end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb); @@ -893,8 +895,9 @@ static struct xhci_segment *trb_in_td( } cur_seg = cur_seg->next; start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]); - } while (1); + } while (cur_seg != start_seg); + return 0; } /* From 5294bea40666db5c5d6c336b8e4e55d69fa576ca Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 4 Nov 2009 11:22:19 -0800 Subject: [PATCH 488/743] USB: xhci: Fix scratchpad deallocation. The scratchpad_free() function uses xhci->page_size to free some memory with pci_free_consistent(). However, the page_size is set to zero before the call, causing kernel oopses on driver unload. Call scratchpad_free() before setting xhci->page_size to zero. Signed-off-by: Sarah Sharp Acked-by: John Youn Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 732580c6cbea..b8fd270a8b0d 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -843,9 +843,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->dcbaa, xhci->dcbaa->dma); xhci->dcbaa = NULL; + scratchpad_free(xhci); xhci->page_size = 0; xhci->page_shift = 0; - scratchpad_free(xhci); } int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) From fca94748c5136ff390eadc443871b82f1f77dcd6 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 4 Nov 2009 11:35:53 -0500 Subject: [PATCH 489/743] USB: usbmon: fix bug in mon_buff_area_shrink This patch (as1299b) fixes a bug in an error-handling path of usbmon's binary interface. The storage area for URB data is divided into fixed-size blocks. If an URB's data can't be copied, the area reserved for it should be decreased to the size of the truncated information (rounded up to a block boundary). Rounding up the amount to be removed and subtracting it from the reserved size is definitely the wrong thing to do. Also, when the data for an isochronous URB can't be copied, we can still copy the isoc packet descriptors. In fact the current code does copy the descriptors, but then sets the capture length to 0 so they remain inaccessible. The capture length should be reduced to the length of the descriptors, not set to 0. Signed-off-by: Alan Stern Acked-by: Pete Zaitcev CC: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/mon/mon_bin.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index 9ed3e741bee1..10f3205798e8 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -348,12 +348,12 @@ static unsigned int mon_buff_area_alloc_contiguous(struct mon_reader_bin *rp, /* * Return a few (kilo-)bytes to the head of the buffer. - * This is used if a DMA fetch fails. + * This is used if a data fetch fails. */ static void mon_buff_area_shrink(struct mon_reader_bin *rp, unsigned int size) { - size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1); + /* size &= ~(PKT_ALIGN-1); -- we're called with aligned size */ rp->b_cnt -= size; if (rp->b_in < size) rp->b_in += rp->b_size; @@ -433,6 +433,7 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, unsigned int urb_length; unsigned int offset; unsigned int length; + unsigned int delta; unsigned int ndesc, lendesc; unsigned char dir; struct mon_bin_hdr *ep; @@ -537,8 +538,10 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, if (length != 0) { ep->flag_data = mon_bin_get_data(rp, offset, urb, length); if (ep->flag_data != 0) { /* Yes, it's 0x00, not '0' */ - ep->len_cap = 0; - mon_buff_area_shrink(rp, length); + delta = (ep->len_cap + PKT_ALIGN-1) & ~(PKT_ALIGN-1); + ep->len_cap -= length; + delta -= (ep->len_cap + PKT_ALIGN-1) & ~(PKT_ALIGN-1); + mon_buff_area_shrink(rp, delta); } } else { ep->flag_data = data_tag; From ff854ce0b17161a86b5ae444c6cb0aa221720fab Mon Sep 17 00:00:00 2001 From: Zhang Le Date: Wed, 4 Nov 2009 23:22:59 +0800 Subject: [PATCH 490/743] USB: option.c: add support for D-Link DWM-162-U5 Add D-Link DWM-162-U5 device id 1e0e:ce16 into option driver. The device has 4 interfaces, of which 1 is handled by storage and the other 3 by option driver. The device appears first as CD-only 05c6:2100 device and must be switched to 1e0e:ce16 mode either by using "eject CD" or usb_modeswitch. The MessageContent for usb_modeswitch.conf is: "55534243e0c26a85000000000000061b000000020000000000000000000000" Signed-off-by: Zhang Le Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index cd44c68954df..319aaf9725b3 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -308,6 +308,7 @@ static int option_resume(struct usb_serial *serial); #define DLINK_VENDOR_ID 0x1186 #define DLINK_PRODUCT_DWM_652 0x3e04 +#define DLINK_PRODUCT_DWM_652_U5 0xce16 #define QISDA_VENDOR_ID 0x1da5 #define QISDA_PRODUCT_H21_4512 0x4512 @@ -586,6 +587,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, + { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) }, From b6b24c73d56a166a829318a1f06803ff9b54857b Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 17 Nov 2009 14:06:14 -0800 Subject: [PATCH 491/743] spi: error status should be negative Return a negative error value instead of a positive Signed-off-by: Roel Kluin Cc: David Brownell Cc: dmitry pervushin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_stmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi_stmp.c b/drivers/spi/spi_stmp.c index d871dc23909c..2552bb364005 100644 --- a/drivers/spi/spi_stmp.c +++ b/drivers/spi/spi_stmp.c @@ -242,7 +242,7 @@ static int stmp_spi_txrx_dma(struct stmp_spi *ss, int cs, wait_for_completion(&ss->done); if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & BM_SSP_CTRL0_RUN)) - status = ETIMEDOUT; + status = -ETIMEDOUT; if (!dma_buf) dma_unmap_single(ss->master_dev, spi_buf_dma, len, dir); From dd04a6b32be5d4f2b8cfccd0a8369c5416d39d68 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 17 Nov 2009 14:06:15 -0800 Subject: [PATCH 492/743] drivers/video/da8xx-fb.c: fix error return The return should be negative on errors Signed-off-by: Roel Kluin Cc: Sudhakar Rajashekhara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/da8xx-fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index d065894ce38f..035d56835b75 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -704,7 +704,7 @@ static int __init fb_probe(struct platform_device *device) if (i == ARRAY_SIZE(known_lcd_panels)) { dev_err(&device->dev, "GLCD: No valid panel found\n"); - ret = ENODEV; + ret = -ENODEV; goto err_clk_disable; } else dev_info(&device->dev, "GLCD: Found %s panel\n", From 410d7a979e0bc8386bf26316303809fa5688238c Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 17 Nov 2009 14:06:15 -0800 Subject: [PATCH 493/743] MAINTAINERS: KMEMCHECK: add file patterns, use M: for Pekka's name and address Signed-off-by: Joe Perches Cc: Vegard Nossum Cc: Pekka Enberg Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 81d68d5b7eea..1ba4f98c9cbc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3084,9 +3084,13 @@ F: kernel/kgdb.c KMEMCHECK M: Vegard Nossum -P Pekka Enberg -M: penberg@cs.helsinki.fi +M: Pekka Enberg S: Maintained +F: Documentation/kmemcheck.txt +F: arch/x86/include/asm/kmemcheck.h +F: arch/x86/mm/kmemcheck/ +F: include/linux/kmemcheck.h +F: mm/kmemcheck.c KMEMLEAK M: Catalin Marinas From e13193319d3a5545c82ed4b724bffd16f87873e3 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Tue, 17 Nov 2009 14:06:18 -0800 Subject: [PATCH 494/743] mm/memory_hotplug: fix section mismatch With CONFIG_MEMORY_HOTPLUG I got following warning: WARNING: vmlinux.o(.text+0x1276b0): Section mismatch in reference from the function hotadd_new_pgdat() to the function .meminit.text:free_area_init_node() The function hotadd_new_pgdat() references the function __meminit free_area_init_node(). This is often because hotadd_new_pgdat lacks a __meminit annotation or the annotation of free_area_init_node is wrong. Use __ref to fix this. Signed-off-by: Hidetoshi Seto Cc: Minchan Kim Cc: Mel Gorman Cc: Yasunori Goto Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory_hotplug.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 821dee596377..380aef45c2cf 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -447,7 +447,8 @@ int online_pages(unsigned long pfn, unsigned long nr_pages) } #endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */ -static pg_data_t *hotadd_new_pgdat(int nid, u64 start) +/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */ +static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start) { struct pglist_data *pgdat; unsigned long zones_size[MAX_NR_ZONES] = {0}; From 9398180097e359646d46083c3e079a54e20bee82 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 17 Nov 2009 14:06:20 -0800 Subject: [PATCH 495/743] workqueue: fix race condition in schedule_on_each_cpu() Commit 65a64464349883891e21e74af16c05d6e1eeb4e9 ("HWPOISON: Allow schedule_on_each_cpu() from keventd") which allows schedule_on_each_cpu() to be called from keventd added a race condition. schedule_on_each_cpu() may race with cpu hotplug and end up executing the function twice on a cpu. Fix it by moving direct execution into the section protected with get/put_online_cpus(). While at it, update code such that direct execution is done after works have been scheduled for all other cpus and drop unnecessary cpu != orig test from flush loop. Signed-off-by: Tejun Heo Cc: Andi Kleen Acked-by: Oleg Nesterov Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/workqueue.c | 34 ++++++++++++++++------------------ 1 file changed, 16 insertions(+), 18 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 12328147132c..67e526b6ae81 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -692,31 +692,29 @@ int schedule_on_each_cpu(work_func_t func) if (!works) return -ENOMEM; - /* - * when running in keventd don't schedule a work item on itself. - * Can just call directly because the work queue is already bound. - * This also is faster. - * Make this a generic parameter for other workqueues? - */ - if (current_is_keventd()) { - orig = raw_smp_processor_id(); - INIT_WORK(per_cpu_ptr(works, orig), func); - func(per_cpu_ptr(works, orig)); - } - get_online_cpus(); + + /* + * When running in keventd don't schedule a work item on + * itself. Can just call directly because the work queue is + * already bound. This also is faster. + */ + if (current_is_keventd()) + orig = raw_smp_processor_id(); + for_each_online_cpu(cpu) { struct work_struct *work = per_cpu_ptr(works, cpu); - if (cpu == orig) - continue; INIT_WORK(work, func); - schedule_work_on(cpu, work); - } - for_each_online_cpu(cpu) { if (cpu != orig) - flush_work(per_cpu_ptr(works, cpu)); + schedule_work_on(cpu, work); } + if (orig >= 0) + func(per_cpu_ptr(works, orig)); + + for_each_online_cpu(cpu) + flush_work(per_cpu_ptr(works, cpu)); + put_online_cpus(); free_percpu(works); return 0; From 6ad696d2cf535772dff659298ec7e7260e344595 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 17 Nov 2009 14:06:22 -0800 Subject: [PATCH 496/743] mm: allow memory hotplug and hibernation in the same kernel Allow memory hotplug and hibernation in the same kernel Memory hotplug and hibernation were exclusive in Kconfig. This is obviously a problem for distribution kernels who want to support both in the same image. After some discussions with Rafael and others the only problem is with parallel memory hotadd or removal while a hibernation operation is in process. It was also working for s390 before. This patch removes the Kconfig level exclusion, and simply makes the memory add / remove functions grab the pm_mutex to exclude against hibernation. Fixes a regression - old kernels didn't exclude memory hotadd and hibernation. Signed-off-by: Andi Kleen Cc: Gerald Schaefer Cc: KOSAKI Motohiro Cc: Yasunori Goto Acked-by: Rafael J. Wysocki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/suspend.h | 21 +++++++++++++++++++-- mm/Kconfig | 5 +---- mm/memory_hotplug.c | 21 +++++++++++++++++---- 3 files changed, 37 insertions(+), 10 deletions(-) diff --git a/include/linux/suspend.h b/include/linux/suspend.h index cd15df6c63cd..5e781d824e6d 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -301,6 +301,8 @@ static inline int unregister_pm_notifier(struct notifier_block *nb) #define pm_notifier(fn, pri) do { (void)(fn); } while (0) #endif /* !CONFIG_PM_SLEEP */ +extern struct mutex pm_mutex; + #ifndef CONFIG_HIBERNATION static inline void register_nosave_region(unsigned long b, unsigned long e) { @@ -308,8 +310,23 @@ static inline void register_nosave_region(unsigned long b, unsigned long e) static inline void register_nosave_region_late(unsigned long b, unsigned long e) { } + +static inline void lock_system_sleep(void) {} +static inline void unlock_system_sleep(void) {} + +#else + +/* Let some subsystems like memory hotadd exclude hibernation */ + +static inline void lock_system_sleep(void) +{ + mutex_lock(&pm_mutex); +} + +static inline void unlock_system_sleep(void) +{ + mutex_unlock(&pm_mutex); +} #endif -extern struct mutex pm_mutex; - #endif /* _LINUX_SUSPEND_H */ diff --git a/mm/Kconfig b/mm/Kconfig index fd3386242cf0..44cf6f0a3a6d 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -128,12 +128,9 @@ config SPARSEMEM_VMEMMAP config MEMORY_HOTPLUG bool "Allow for memory hot-add" depends on SPARSEMEM || X86_64_ACPI_NUMA - depends on HOTPLUG && !(HIBERNATION && !S390) && ARCH_ENABLE_MEMORY_HOTPLUG + depends on HOTPLUG && ARCH_ENABLE_MEMORY_HOTPLUG depends on (IA64 || X86 || PPC_BOOK3S_64 || SUPERH || S390) -comment "Memory hotplug is currently incompatible with Software Suspend" - depends on SPARSEMEM && HOTPLUG && HIBERNATION && !S390 - config MEMORY_HOTPLUG_SPARSE def_bool y depends on SPARSEMEM && MEMORY_HOTPLUG diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 380aef45c2cf..2047465cd27c 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -26,6 +26,7 @@ #include #include #include +#include #include @@ -485,14 +486,18 @@ int __ref add_memory(int nid, u64 start, u64 size) struct resource *res; int ret; + lock_system_sleep(); + res = register_memory_resource(start, size); + ret = -EEXIST; if (!res) - return -EEXIST; + goto out; if (!node_online(nid)) { pgdat = hotadd_new_pgdat(nid, start); + ret = -ENOMEM; if (!pgdat) - return -ENOMEM; + goto out; new_pgdat = 1; } @@ -515,7 +520,8 @@ int __ref add_memory(int nid, u64 start, u64 size) BUG_ON(ret); } - return ret; + goto out; + error: /* rollback pgdat allocation and others */ if (new_pgdat) @@ -523,6 +529,8 @@ error: if (res) release_memory_resource(res); +out: + unlock_system_sleep(); return ret; } EXPORT_SYMBOL_GPL(add_memory); @@ -759,6 +767,8 @@ int offline_pages(unsigned long start_pfn, if (!test_pages_in_a_zone(start_pfn, end_pfn)) return -EINVAL; + lock_system_sleep(); + zone = page_zone(pfn_to_page(start_pfn)); node = zone_to_nid(zone); nr_pages = end_pfn - start_pfn; @@ -766,7 +776,7 @@ int offline_pages(unsigned long start_pfn, /* set above range as isolated */ ret = start_isolate_page_range(start_pfn, end_pfn); if (ret) - return ret; + goto out; arg.start_pfn = start_pfn; arg.nr_pages = nr_pages; @@ -844,6 +854,7 @@ repeat: writeback_set_ratelimit(); memory_notify(MEM_OFFLINE, &arg); + unlock_system_sleep(); return 0; failed_removal: @@ -853,6 +864,8 @@ failed_removal: /* pushback to free area */ undo_isolate_page_range(start_pfn, end_pfn); +out: + unlock_system_sleep(); return ret; } From 9ebd4eba761b624a6a6c9189335adeddcb1fa0e0 Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Tue, 17 Nov 2009 14:06:23 -0800 Subject: [PATCH 497/743] procfs: fix /proc//stat stack pointer for kernel threads Fix a small issue for the stack pointer in /proc//stat. In case of a kernel thread the value of the printed stack pointer should be 0. Signed-off-by: Stefani Seibold Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/array.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/proc/array.c b/fs/proc/array.c index 07f77a7945c3..822c2d506518 100644 --- a/fs/proc/array.c +++ b/fs/proc/array.c @@ -571,7 +571,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns, rsslim, mm ? mm->start_code : 0, mm ? mm->end_code : 0, - (permitted) ? task->stack_start : 0, + (permitted && mm) ? task->stack_start : 0, esp, eip, /* The signal information here is obsolete. From 978b4053aefd422713f289f2a315ce2acba62018 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 17 Nov 2009 14:06:24 -0800 Subject: [PATCH 498/743] fcntl: rename F_OWNER_GID to F_OWNER_PGRP This is for consistency with various ioctl() operations that include the suffix "PGRP" in their names, and also for consistency with PRIO_PGRP, used with setpriority() and getpriority(). Also, using PGRP instead of GID avoids confusion with the common abbreviation of "group ID". I'm fine with anything that makes it more consistent, and if PGRP is what is the predominant abbreviation then I see no need to further confuse matters by adding a third one. Signed-off-by: Peter Zijlstra Acked-by: Michael Kerrisk Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fcntl.c | 4 ++-- include/asm-generic/fcntl.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/fcntl.c b/fs/fcntl.c index fc089f2f7f56..2cf93ec40a67 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -284,7 +284,7 @@ static int f_setown_ex(struct file *filp, unsigned long arg) type = PIDTYPE_PID; break; - case F_OWNER_GID: + case F_OWNER_PGRP: type = PIDTYPE_PGID; break; @@ -321,7 +321,7 @@ static int f_getown_ex(struct file *filp, unsigned long arg) break; case PIDTYPE_PGID: - owner.type = F_OWNER_GID; + owner.type = F_OWNER_PGRP; break; default: diff --git a/include/asm-generic/fcntl.h b/include/asm-generic/fcntl.h index cd2d7896e34b..495dc8af4044 100644 --- a/include/asm-generic/fcntl.h +++ b/include/asm-generic/fcntl.h @@ -89,7 +89,7 @@ #define F_OWNER_TID 0 #define F_OWNER_PID 1 -#define F_OWNER_GID 2 +#define F_OWNER_PGRP 2 struct f_owner_ex { int type; From 648f15345add88a7eea724365fe1217a8d8a1e16 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 17 Nov 2009 22:50:45 +0000 Subject: [PATCH 499/743] sh: Fixup last users of irq_chip->typename The typename member of struct irq_chip was kept for migration purposes and is obsolete since more than 2 years. Fix up the leftovers. Signed-off-by: Thomas Gleixner Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/irq/imask.c | 2 +- arch/sh/kernel/cpu/irq/intc-sh5.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sh/kernel/cpu/irq/imask.c b/arch/sh/kernel/cpu/irq/imask.c index 6b5d191eec3a..a351ed84eec5 100644 --- a/arch/sh/kernel/cpu/irq/imask.c +++ b/arch/sh/kernel/cpu/irq/imask.c @@ -68,7 +68,7 @@ static void unmask_imask_irq(unsigned int irq) } static struct irq_chip imask_irq_chip = { - .typename = "SR.IMASK", + .name = "SR.IMASK", .mask = mask_imask_irq, .unmask = unmask_imask_irq, .mask_ack = mask_imask_irq, diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c index 6c092f1f5557..06e7e2959b54 100644 --- a/arch/sh/kernel/cpu/irq/intc-sh5.c +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -85,7 +85,7 @@ static void mask_and_ack_intc(unsigned int); static void end_intc_irq(unsigned int irq); static struct irq_chip intc_irq_type = { - .typename = "INTC", + .name = "INTC", .startup = startup_intc_irq, .shutdown = shutdown_intc_irq, .enable = enable_intc_irq, From f7f3cad06080f14f60b1453af94463ff68ea2739 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Sat, 24 Oct 2009 17:25:38 +0200 Subject: [PATCH 500/743] [CPUFREQ] longhaul: select Longhaul version 2 for capable CPUs There is a typo in the longhaul detection code so only Longhaul v1 or Longhaul v3 is selected. The Longhaul v2 is not selected even for CPUs which are capable of. Tested on PCChips Giga Pro board. Frequency changes work and the Longhaul v2 detects that the board is not capable of changing CPU voltage. Signed-off-by: Krzysztof Helt Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/longhaul.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c index ce2ed3e4aad9..cabd2fa3fc93 100644 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.c +++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c @@ -813,7 +813,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr)); break; case 1 ... 15: - longhaul_version = TYPE_LONGHAUL_V1; + longhaul_version = TYPE_LONGHAUL_V2; if (c->x86_mask < 8) { cpu_model = CPU_SAMUEL2; cpuname = "C3 'Samuel 2' [C5B]"; From c53614ec17fe6296a696aa4ac71a799814bb50c1 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 6 Oct 2009 17:36:53 +0200 Subject: [PATCH 501/743] [CPUFREQ] powernow-k8: Fix test in get_transition_latency() Not makes it a bool before the comparison. Signed-off-by: Roel Kluin Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 6394aa5c7985..3f12dabeab52 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1022,7 +1022,7 @@ static int get_transition_latency(struct powernow_k8_data *data) * set it to 1 to avoid problems in the future. * For all others it's a BIOS bug. */ - if (!boot_cpu_data.x86 == 0x11) + if (boot_cpu_data.x86 != 0x11) printk(KERN_ERR FW_WARN PFX "Invalid zero transition " "latency\n"); max_latency = 1; From 293afe44d75abce4252db76cbb303a7de4297ce1 Mon Sep 17 00:00:00 2001 From: John Villalovos Date: Fri, 25 Sep 2009 13:30:08 -0400 Subject: [PATCH 502/743] [CPUFREQ] acpi-cpufreq: blacklist Intel 0f68: Fix HT detection and put in notification message Removing the SMT/HT check, since the Errata doesn't mention Hyper-Threading. Adding in a printk, so that the user knows why acpi-cpufreq refuses to load. Also, once system is blacklisted, don't repeat checks to see if blacklisted. This also causes the message to only be printed once, rather than for each CPU. Signed-off-by: John L. Villalovos Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 23 ++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 7d5c3b0ea8da..8b581d3905cb 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -526,15 +526,21 @@ static const struct dmi_system_id sw_any_bug_dmi_table[] = { static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c) { - /* http://www.intel.com/Assets/PDF/specupdate/314554.pdf + /* Intel Xeon Processor 7100 Series Specification Update + * http://www.intel.com/Assets/PDF/specupdate/314554.pdf * AL30: A Machine Check Exception (MCE) Occurring during an * Enhanced Intel SpeedStep Technology Ratio Change May Cause - * Both Processor Cores to Lock Up when HT is enabled*/ + * Both Processor Cores to Lock Up. */ if (c->x86_vendor == X86_VENDOR_INTEL) { if ((c->x86 == 15) && (c->x86_model == 6) && - (c->x86_mask == 8) && smt_capable()) + (c->x86_mask == 8)) { + printk(KERN_INFO "acpi-cpufreq: Intel(R) " + "Xeon(R) 7100 Errata AL30, processors may " + "lock up on frequency changes: disabling " + "acpi-cpufreq.\n"); return -ENODEV; + } } return 0; } @@ -549,13 +555,18 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) unsigned int result = 0; struct cpuinfo_x86 *c = &cpu_data(policy->cpu); struct acpi_processor_performance *perf; +#ifdef CONFIG_SMP + static int blacklisted; +#endif dprintk("acpi_cpufreq_cpu_init\n"); #ifdef CONFIG_SMP - result = acpi_cpufreq_blacklist(c); - if (result) - return result; + if (blacklisted) + return blacklisted; + blacklisted = acpi_cpufreq_blacklist(c); + if (blacklisted) + return blacklisted; #endif data = kzalloc(sizeof(struct acpi_cpufreq_data), GFP_KERNEL); From e77b89f13a0d48aea70b69976e854f2a2444a519 Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Mon, 5 Oct 2009 00:38:55 +0400 Subject: [PATCH 503/743] [CPUFREQ] Fix use after free on governor restore Currently on governer backup/restore path we storing governor's pointer. This is wrong because one may unload governor's module after cpu goes offline. As result use-after-free will take place on restored cpu. It is not easy to exploit this bug, but still we have to close this issue ASAP. Issue was introduced by following commit 084f34939424161669467c19280dbcf637730314 ##TESTCASE## #!/bin/sh -x modprobe acpi_cpufreq # Any non default governor, in may case it is "ondemand" modprobe cpufreq_ondemand echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor rmmod acpi_cpufreq rmmod cpufreq_ondemand modprobe acpi_cpufreq # << use-after-free here. Signed-off-by: Dmitry Monakhov Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 3938c7817095..dab1410d1c0d 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -41,7 +41,7 @@ static struct cpufreq_driver *cpufreq_driver; static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data); #ifdef CONFIG_HOTPLUG_CPU /* This one keeps track of the previously set governor of a removed CPU */ -static DEFINE_PER_CPU(struct cpufreq_governor *, cpufreq_cpu_governor); +static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); #endif static DEFINE_SPINLOCK(cpufreq_driver_lock); @@ -774,10 +774,12 @@ int cpufreq_add_dev_policy(unsigned int cpu, struct cpufreq_policy *policy, #ifdef CONFIG_SMP unsigned long flags; unsigned int j; - #ifdef CONFIG_HOTPLUG_CPU - if (per_cpu(cpufreq_cpu_governor, cpu)) { - policy->governor = per_cpu(cpufreq_cpu_governor, cpu); + struct cpufreq_governor *gov; + + gov = __find_governor(per_cpu(cpufreq_cpu_governor, cpu)); + if (gov) { + policy->governor = gov; dprintk("Restoring governor %s for cpu %d\n", policy->governor->name, cpu); } @@ -1111,7 +1113,8 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev) #ifdef CONFIG_SMP #ifdef CONFIG_HOTPLUG_CPU - per_cpu(cpufreq_cpu_governor, cpu) = data->governor; + strncpy(per_cpu(cpufreq_cpu_governor, cpu), data->governor->name, + CPUFREQ_NAME_LEN); #endif /* if we have other CPUs still registered, we need to unlink them, @@ -1135,7 +1138,8 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev) continue; dprintk("removing link for cpu %u\n", j); #ifdef CONFIG_HOTPLUG_CPU - per_cpu(cpufreq_cpu_governor, j) = data->governor; + strncpy(per_cpu(cpufreq_cpu_governor, j), + data->governor->name, CPUFREQ_NAME_LEN); #endif cpu_sys_dev = get_cpu_sysdev(j); sysfs_remove_link(&cpu_sys_dev->kobj, "cpufreq"); From 8dca15e40889e5d5e9655b03ba79c26200f760ce Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 2 Nov 2009 23:35:30 -0800 Subject: [PATCH 504/743] [CPUFREQ] speedstep-ich: fix error caused by 394122ab144dae4b276d74644a2f11c44a60ac5c "[CPUFREQ] cpumask: avoid playing with cpus_allowed in speedstep-ich.c" changed the code to mistakenly pass the current cpu as the "processor" argument of speedstep_get_frequency(), whereas it should be the type of the processor. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14340 Based on a patch by Dave Mueller. Signed-off-by: Rusty Russell Acked-by: Dominik Brodowski Reported-by: Dave Mueller Cc: Signed-off-by: Andrew Morton Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/speedstep-ich.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c index 6911e91fb4f6..3ae5a7a3a500 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c @@ -232,28 +232,23 @@ static unsigned int speedstep_detect_chipset(void) return 0; } -struct get_freq_data { - unsigned int speed; - unsigned int processor; -}; - -static void get_freq_data(void *_data) +static void get_freq_data(void *_speed) { - struct get_freq_data *data = _data; + unsigned int *speed = _speed; - data->speed = speedstep_get_frequency(data->processor); + *speed = speedstep_get_frequency(speedstep_processor); } static unsigned int speedstep_get(unsigned int cpu) { - struct get_freq_data data = { .processor = cpu }; + unsigned int speed; /* You're supposed to ensure CPU is online. */ - if (smp_call_function_single(cpu, get_freq_data, &data, 1) != 0) + if (smp_call_function_single(cpu, get_freq_data, &speed, 1) != 0) BUG(); - dprintk("detected %u kHz as current frequency\n", data.speed); - return data.speed; + dprintk("detected %u kHz as current frequency\n", speed); + return speed; } /** From 54c9a35d9faef06e00e2a941eb8fe674f1886901 Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Wed, 11 Nov 2009 16:50:29 -0800 Subject: [PATCH 505/743] [CPUFREQ] Resolve time unit thinko in ondemand/conservative govs ondemand and conservative governors are messing up time units in the code path where NO_HZ is not enabled and ignore_nice is set. The walltime idletime stored is in jiffies and nice time calculation is happening in microseconds. The problem was reported and diagnosed by Alexander here. http://marc.info/?l=linux-kernel&m=125752550404513&w=2 The patch below fixes this thinko. Reported-by: Alexander Miller Tested-by: Alexander Miller Signed-off-by: Venkatesh Pallipadi Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq_conservative.c | 4 ++-- drivers/cpufreq/cpufreq_ondemand.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index bc33ddc9c97c..c7b081b839ff 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -116,9 +116,9 @@ static inline cputime64_t get_cpu_idle_time_jiffy(unsigned int cpu, idle_time = cputime64_sub(cur_wall_time, busy_time); if (wall) - *wall = cur_wall_time; + *wall = (cputime64_t)jiffies_to_usecs(cur_wall_time); - return idle_time; + return (cputime64_t)jiffies_to_usecs(idle_time);; } static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall) diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 071699de50ee..4b34ade2332b 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -133,9 +133,9 @@ static inline cputime64_t get_cpu_idle_time_jiffy(unsigned int cpu, idle_time = cputime64_sub(cur_wall_time, busy_time); if (wall) - *wall = cur_wall_time; + *wall = (cputime64_t)jiffies_to_usecs(cur_wall_time); - return idle_time; + return (cputime64_t)jiffies_to_usecs(idle_time); } static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall) From 90e41bac100e34f955f48e7686c2fc685ac9aa30 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Thu, 12 Nov 2009 09:18:46 -0500 Subject: [PATCH 506/743] [CPUFREQ] Fix stale cpufreq_cpu_governor pointer Dave, Attached is an update of my patch against the cpufreq fixes branch. Before applying the patch I compiled and booted the tree to see if the panic was still there -- to my surprise it was not. This is because of the conversion of cpufreq_cpu_governor to a char[]. While the panic is kaput, the problem of stale data continues and my patch is still valid. It is possible to end up with the wrong governor after hotplug events because CPUFREQ_DEFAULT_GOVERNOR is statically linked to a default, while the cpu siblings may have had a different governor assigned by a user. ie) the patch is still needed in order to keep the governors assigned properly when hotplugging devices Signed-off-by: Prarit Bhargava Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq.c | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index dab1410d1c0d..ff57c40e9b8b 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -951,10 +951,13 @@ err_out_kobj_put: static int cpufreq_add_dev(struct sys_device *sys_dev) { unsigned int cpu = sys_dev->id; - int ret = 0; + int ret = 0, found = 0; struct cpufreq_policy *policy; unsigned long flags; unsigned int j; +#ifdef CONFIG_HOTPLUG_CPU + int sibling; +#endif if (cpu_is_offline(cpu)) return 0; @@ -1001,7 +1004,19 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) INIT_WORK(&policy->update, handle_update); /* Set governor before ->init, so that driver could check it */ - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; +#ifdef CONFIG_HOTPLUG_CPU + for_each_online_cpu(sibling) { + struct cpufreq_policy *cp = per_cpu(cpufreq_cpu_data, sibling); + if (cp && cp->governor && + (cpumask_test_cpu(cpu, cp->related_cpus))) { + policy->governor = cp->governor; + found = 1; + break; + } + } +#endif + if (!found) + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; /* call driver. From then on the cpufreq must be able * to accept all calls to ->verify and ->setpolicy for this CPU */ @@ -1610,9 +1625,22 @@ EXPORT_SYMBOL_GPL(cpufreq_register_governor); void cpufreq_unregister_governor(struct cpufreq_governor *governor) { +#ifdef CONFIG_HOTPLUG_CPU + int cpu; +#endif + if (!governor) return; +#ifdef CONFIG_HOTPLUG_CPU + for_each_present_cpu(cpu) { + if (cpu_online(cpu)) + continue; + if (!strcmp(per_cpu(cpufreq_cpu_governor, cpu), governor->name)) + strcpy(per_cpu(cpufreq_cpu_governor, cpu), "\0"); + } +#endif + mutex_lock(&cpufreq_governor_mutex); list_del(&governor->governor_list); mutex_unlock(&cpufreq_governor_mutex); From 4acc5a8eb42c3a5a7df570face5f03fb37fff349 Mon Sep 17 00:00:00 2001 From: Dave Mitchell Date: Tue, 17 Nov 2009 14:56:55 +0000 Subject: [PATCH 507/743] ibm_newemac: Fix EMACx_TRTR[TRT] bit shifts The TRT bit shifts were reversed for EMAC4 and non-EMAC4 during the port from ibm_emac to ibm_newemac. This patch corrects that error. Signed-off-by: Dave Mitchell Acked-by: Feng Kan Acked-by: Prodyut Hazarika Acked-by: Stefan Roese Signed-off-by: David S. Miller --- drivers/net/ibm_newemac/emac.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ibm_newemac/emac.h b/drivers/net/ibm_newemac/emac.h index d34adf99fc6a..8a61b597a169 100644 --- a/drivers/net/ibm_newemac/emac.h +++ b/drivers/net/ibm_newemac/emac.h @@ -263,8 +263,8 @@ struct emac_regs { /* EMACx_TRTR */ -#define EMAC_TRTR_SHIFT_EMAC4 27 -#define EMAC_TRTR_SHIFT 24 +#define EMAC_TRTR_SHIFT_EMAC4 24 +#define EMAC_TRTR_SHIFT 27 /* EMAC specific TX descriptor control fields (write access) */ #define EMAC_TX_CTRL_GFCS 0x0200 From 70e3bb504ccfe6ba725ab120bdb516d205d834f9 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Tue, 17 Nov 2009 16:38:28 +0000 Subject: [PATCH 508/743] cxgb3: fix premature page unmap unmap Rx page only when guaranteed that this page won't be used anymore to allocate rx page chunks. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/sge.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index f86612857a73..6366061712f4 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -879,7 +879,7 @@ recycle: pci_dma_sync_single_for_cpu(adap->pdev, dma_addr, len, PCI_DMA_FROMDEVICE); (*sd->pg_chunk.p_cnt)--; - if (!*sd->pg_chunk.p_cnt) + if (!*sd->pg_chunk.p_cnt && sd->pg_chunk.page != fl->pg_chunk.page) pci_unmap_page(adap->pdev, sd->pg_chunk.mapping, fl->alloc_size, @@ -2088,7 +2088,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs, PCI_DMA_FROMDEVICE); (*sd->pg_chunk.p_cnt)--; - if (!*sd->pg_chunk.p_cnt) + if (!*sd->pg_chunk.p_cnt && sd->pg_chunk.page != fl->pg_chunk.page) pci_unmap_page(adap->pdev, sd->pg_chunk.mapping, fl->alloc_size, From bd6ddcb41d5fbdcbc1486f48d8023f234b4a7f8d Mon Sep 17 00:00:00 2001 From: Anuj Aggarwal Date: Tue, 17 Nov 2009 21:43:42 +0530 Subject: [PATCH 509/743] ASoC: Modifying the license string GPLv2 for OMAP3 EVM Correcting the license string from GPLv2 -> GPL v2. Found the problem while building OMAP3 ASoC driver as module. Signed-off-by: Anuj Aggarwal Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/omap/omap3evm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/omap/omap3evm.c b/sound/soc/omap/omap3evm.c index 9114c263077b..13aa380de162 100644 --- a/sound/soc/omap/omap3evm.c +++ b/sound/soc/omap/omap3evm.c @@ -144,4 +144,4 @@ module_exit(omap3evm_soc_exit); MODULE_AUTHOR("Anuj Aggarwal "); MODULE_DESCRIPTION("ALSA SoC OMAP3 EVM"); -MODULE_LICENSE("GPLv2"); +MODULE_LICENSE("GPL v2"); From f3dd70414cdc0203ca63eef83ca130c2d1903b30 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sat, 7 Nov 2009 23:16:12 +0200 Subject: [PATCH 510/743] ASoC: OMAP3 Pandora: update for TWL4030 codec changes A while ago TWL4030 had it's playback stream name changed, but pandora needs it for it's playback path. Update to correct stream name so that playback works again. Also mark VIBRA output as not connected. Signed-off-by: Grazvydas Ignotas Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/omap/omap3pandora.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c index ad219aaf7cb8..0cd06f5dd356 100644 --- a/sound/soc/omap/omap3pandora.c +++ b/sound/soc/omap/omap3pandora.c @@ -134,7 +134,7 @@ static int omap3pandora_hp_event(struct snd_soc_dapm_widget *w, * |P| <--- TWL4030 <--------- Line In and MICs */ static const struct snd_soc_dapm_widget omap3pandora_out_dapm_widgets[] = { - SND_SOC_DAPM_DAC("PCM DAC", "Playback", SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_DAC("PCM DAC", "HiFi Playback", SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_PGA_E("Headphone Amplifier", SND_SOC_NOPM, 0, 0, NULL, 0, omap3pandora_hp_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), @@ -181,6 +181,7 @@ static int omap3pandora_out_init(struct snd_soc_codec *codec) snd_soc_dapm_nc_pin(codec, "CARKITR"); snd_soc_dapm_nc_pin(codec, "HFL"); snd_soc_dapm_nc_pin(codec, "HFR"); + snd_soc_dapm_nc_pin(codec, "VIBRA"); ret = snd_soc_dapm_new_controls(codec, omap3pandora_out_dapm_widgets, ARRAY_SIZE(omap3pandora_out_dapm_widgets)); From bab0212467e58929470ae3ae32515f17e30c3926 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Tue, 17 Nov 2009 13:51:01 -0700 Subject: [PATCH 511/743] ASoC: tlv320aic23 fix rate selection Fix the ordering of sr_valid_mask array. The lower bit of the index represents USB not bosr. Reported-by: Anuj Aggarwal Signed-off-by: Troy Kisky Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/codecs/tlv320aic23.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c index 0b8dcb5cd729..6b24d8bb02bb 100644 --- a/sound/soc/codecs/tlv320aic23.c +++ b/sound/soc/codecs/tlv320aic23.c @@ -265,8 +265,8 @@ static const int bosr_usb_divisor_table[] = { #define UPPER_GROUP ((1<<8) | (1<<9) | (1<<10) | (1<<11) | (1<<15)) static const unsigned short sr_valid_mask[] = { LOWER_GROUP|UPPER_GROUP, /* Normal, bosr - 0*/ - LOWER_GROUP|UPPER_GROUP, /* Normal, bosr - 1*/ LOWER_GROUP, /* Usb, bosr - 0*/ + LOWER_GROUP|UPPER_GROUP, /* Normal, bosr - 1*/ UPPER_GROUP, /* Usb, bosr - 1*/ }; /* From d32b20fc7dad87ac95fcc73fca3606c0db85f210 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 17 Nov 2009 14:39:03 -0800 Subject: [PATCH 512/743] omap: fix unlikely(x) < y The closing parenthesis was not in the right location. Signed-off-by: Roel Kluin Cc: Russell King Signed-off-by: Tony Lindgren Signed-off-by: Andrew Morton --- arch/arm/plat-omap/gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 71ebd7fcfea1..7c345b757df1 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -373,7 +373,7 @@ static inline int gpio_valid(int gpio) static int check_gpio(int gpio) { - if (unlikely(gpio_valid(gpio)) < 0) { + if (unlikely(gpio_valid(gpio) < 0)) { printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio); dump_stack(); return -1; From e7fdc6052e78738ce90e0bdc051f2ddf60e41324 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 17 Nov 2009 14:39:06 -0800 Subject: [PATCH 513/743] OMAP: cs should be positive in gpmc_cs_free() The index `cs' is signed, test whether it is negative before we release gpmc_cs_mem[cs]. Signed-off-by: Roel Kluin Cc: Russell King Signed-off-by: Tony Lindgren Signed-off-by: Andrew Morton --- arch/arm/mach-omap2/gpmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index f8657568b1ba..f3c992e29651 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -378,7 +378,7 @@ EXPORT_SYMBOL(gpmc_cs_request); void gpmc_cs_free(int cs) { spin_lock(&gpmc_mem_lock); - if (cs >= GPMC_CS_NUM || !gpmc_cs_reserved(cs)) { + if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) { printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs); BUG(); spin_unlock(&gpmc_mem_lock); From 5ed1f321a71b8549cc2eea26c94fe7943ed01d31 Mon Sep 17 00:00:00 2001 From: Jay Fenlason Date: Tue, 17 Nov 2009 12:29:17 -0500 Subject: [PATCH 514/743] firewire: ohci: Make cycleMatch ISO transmission work Calling the START_ISO ioctl with a nonnegative cycle paramater has never worked. Last night I got around to figuring out why. Most of this patch is a big comment explaining why we enable an interrupt source then don't actually do anything when we get one. As the comment says, we should do more, but we don't have a way to tell userspace what happened. . . Signed-off-by: Jay Fenlason Signed-off-by: Stefan Richter (edited comment) --- drivers/firewire/ohci.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 5d524254499e..c07cfada190a 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -275,7 +275,7 @@ static void log_irqs(u32 evt) !(evt & OHCI1394_busReset)) return; - fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt, + fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt, evt & OHCI1394_selfIDComplete ? " selfID" : "", evt & OHCI1394_RQPkt ? " AR_req" : "", evt & OHCI1394_RSPkt ? " AR_resp" : "", @@ -286,6 +286,7 @@ static void log_irqs(u32 evt) evt & OHCI1394_postedWriteErr ? " postedWriteErr" : "", evt & OHCI1394_cycleTooLong ? " cycleTooLong" : "", evt & OHCI1394_cycle64Seconds ? " cycle64Seconds" : "", + evt & OHCI1394_cycleInconsistent ? " cycleInconsistent" : "", evt & OHCI1394_regAccessFail ? " regAccessFail" : "", evt & OHCI1394_busReset ? " busReset" : "", evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt | @@ -293,6 +294,7 @@ static void log_irqs(u32 evt) OHCI1394_respTxComplete | OHCI1394_isochRx | OHCI1394_isochTx | OHCI1394_postedWriteErr | OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds | + OHCI1394_cycleInconsistent | OHCI1394_regAccessFail | OHCI1394_busReset) ? " ?" : ""); } @@ -1439,6 +1441,17 @@ static irqreturn_t irq_handler(int irq, void *data) OHCI1394_LinkControl_cycleMaster); } + if (unlikely(event & OHCI1394_cycleInconsistent)) { + /* + * We need to clear this event bit in order to make + * cycleMatch isochronous I/O work. In theory we should + * stop active cycleMatch iso contexts now and restart + * them at least two cycles later. (FIXME?) + */ + if (printk_ratelimit()) + fw_notify("isochronous cycle inconsistent\n"); + } + if (event & OHCI1394_cycle64Seconds) { cycle_time = reg_read(ohci, OHCI1394_IsochronousCycleTimer); if ((cycle_time & 0x80000000) == 0) @@ -1528,6 +1541,7 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length) OHCI1394_reqTxComplete | OHCI1394_respTxComplete | OHCI1394_isochRx | OHCI1394_isochTx | OHCI1394_postedWriteErr | OHCI1394_cycleTooLong | + OHCI1394_cycleInconsistent | OHCI1394_cycle64Seconds | OHCI1394_regAccessFail | OHCI1394_masterIntEnable); if (param_debug & OHCI_PARAM_DEBUG_BUSRESETS) From c09c59e6a070d6af05f238f255aea268185273ef Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Wed, 18 Nov 2009 16:16:06 -0500 Subject: [PATCH 515/743] ima: replace GFP_KERNEL with GFP_NOFS While running fsstress tests on the NFSv4 mounted ext3 and ext4 filesystem, the following call trace was generated on the nfs server machine. Replace GFP_KERNEL with GFP_NOFS in ima_iint_insert() to avoid a potential deadlock. ================================= [ INFO: inconsistent lock state ] 2.6.31-31.el6.x86_64 #1 --------------------------------- inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. kswapd2/75 [HC0[0]:SC0[0]:HE1:SE1] takes: (jbd2_handle){+.+.?.}, at: [] jbd2_journal_start+0xfe/0x13f {RECLAIM_FS-ON-W} state was registered at: [] mark_held_locks+0x65/0x99 [] lockdep_trace_alloc+0xbd/0xf5 [] kmem_cache_alloc+0x40/0x185 [] ima_iint_insert+0x3d/0xf1 [] ima_inode_alloc+0x25/0x44 [] inode_init_always+0xec/0x271 [] alloc_inode+0x51/0xa1 [] new_inode+0x2e/0x94 [] ext4_new_inode+0xb8/0xdc9 [] ext4_create+0xcf/0x175 [] vfs_create+0x82/0xb8 [] do_filp_open+0x32c/0x9ee [] do_sys_open+0x6c/0x12c [] sys_open+0x2e/0x44 [] system_call_fastpath+0x16/0x1b [] 0xffffffffffffffff irq event stamp: 90371 hardirqs last enabled at (90371): [] kmem_cache_alloc+0xf0/0x185 hardirqs last disabled at (90370): [] kmem_cache_alloc+0x89/0x185 softirqs last enabled at (89492): [] __do_softirq+0x1bf/0x1eb softirqs last disabled at (89477): [] call_softirq+0x1c/0x30 other info that might help us debug this: 2 locks held by kswapd2/75: #0: (shrinker_rwsem){++++..}, at: [] shrink_slab+0x44/0x177 #1: (&type->s_umount_key#25){++++..}, at: [] Reported-by: Muni P. Beerakam Reported-by: Amit K. Arora Cc: stable@kernel.org Signed-off-by: Mimi Zohar Signed-off-by: James Morris --- security/integrity/ima/ima_iint.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/security/integrity/ima/ima_iint.c b/security/integrity/ima/ima_iint.c index b8dd693f8790..a4e2b1dac943 100644 --- a/security/integrity/ima/ima_iint.c +++ b/security/integrity/ima/ima_iint.c @@ -58,11 +58,11 @@ struct ima_iint_cache *ima_iint_insert(struct inode *inode) if (!ima_initialized) return iint; - iint = kmem_cache_alloc(iint_cache, GFP_KERNEL); + iint = kmem_cache_alloc(iint_cache, GFP_NOFS); if (!iint) return iint; - rc = radix_tree_preload(GFP_KERNEL); + rc = radix_tree_preload(GFP_NOFS); if (rc < 0) goto out; From 8ade00824607fcfa8842572012d4393b40a74a94 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 18 Nov 2009 17:15:06 +0100 Subject: [PATCH 516/743] mac80211: fix addba timer (again...) commit 2171abc58644e09dbba546d91366b12743115396 Author: Johannes Berg Date: Thu Oct 29 08:34:00 2009 +0100 mac80211: fix addba timer left a problem in there, even if the timer was never started it could be deleted and then added. Linus pointed out that del_timer_sync() isn't actually needed if we make the timer able to deal with no longer being needed when it gets queued _while_ we're in the locked section that also deletes it. For that the timer function only needs to check the HT_ADDBA_RECEIVED_MSK bit as well as the HT_ADDBA_REQUESTED_MSK bit, only if the former is clear should it do anything. Cc: Linus Torvalds Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/agg-tx.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index b09948ceec4a..206fd82f0c76 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -173,12 +173,14 @@ static void sta_addba_resp_timer_expired(unsigned long data) /* check if the TID waits for addBA response */ spin_lock_bh(&sta->lock); - if (!(*state & HT_ADDBA_REQUESTED_MSK)) { + if ((*state & (HT_ADDBA_REQUESTED_MSK | HT_ADDBA_RECEIVED_MSK)) != + HT_ADDBA_REQUESTED_MSK) { spin_unlock_bh(&sta->lock); *state = HT_AGG_STATE_IDLE; #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "timer expired on tid %d but we are not " - "expecting addBA response there", tid); + "(or no longer) expecting addBA response there", + tid); #endif return; } @@ -666,21 +668,21 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local, state = &sta->ampdu_mlme.tid_state_tx[tid]; - del_timer_sync(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); - spin_lock_bh(&sta->lock); if (!(*state & HT_ADDBA_REQUESTED_MSK)) - goto timer_still_needed; + goto out; if (mgmt->u.action.u.addba_resp.dialog_token != sta->ampdu_mlme.tid_tx[tid]->dialog_token) { #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "wrong addBA response token, tid %d\n", tid); #endif /* CONFIG_MAC80211_HT_DEBUG */ - goto timer_still_needed; + goto out; } + del_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); + #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "switched off addBA timer for tid %d \n", tid); #endif /* CONFIG_MAC80211_HT_DEBUG */ @@ -699,10 +701,6 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local, ___ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_INITIATOR); } - goto out; - - timer_still_needed: - add_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); out: spin_unlock_bh(&sta->lock); } From ec402ba97a6479dd80488b4404a73275e894289f Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 18 Nov 2009 10:22:46 +0000 Subject: [PATCH 517/743] agp/intel-agp: Set dma_mask for capable chipsets before agp_add_bridge() We should set this before calling agp_add_bridge() so that it's done before we map the scratch page too. This should probably fix the regression reported as k.o. bug #14627. Signed-off-by: David Woodhouse Signed-off-by: Dave Airlie --- drivers/char/agp/intel-agp.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 4068467ce7b9..10e1f0390bbb 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -1161,12 +1161,6 @@ static int intel_i915_configure(void) intel_i9xx_setup_flush(); -#ifdef USE_PCI_DMA_API - if (pci_set_dma_mask(intel_private.pcidev, DMA_BIT_MASK(36))) - dev_err(&intel_private.pcidev->dev, - "set gfx device dma mask 36bit failed!\n"); -#endif - return 0; } @@ -2456,6 +2450,11 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev, &bridge->mode); } + if (bridge->driver->mask_memory == intel_i965_mask_memory) + if (pci_set_dma_mask(intel_private.pcidev, DMA_BIT_MASK(36))) + dev_err(&intel_private.pcidev->dev, + "set gfx device dma mask 36bit failed!\n"); + pci_set_drvdata(pdev, bridge); return agp_add_bridge(bridge); } From a414f01ac2899f273ef8fe98fa44158ac12793f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 18 Nov 2009 22:31:52 +0100 Subject: [PATCH 518/743] strcmp: fix overflow and possibly signedness error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Doing the strcmp return value as signed char __res = *cs - *ct; is wrong for two reasons. The subtraction can overflow because __res doesn't use a type big enough. Moreover the compared bytes should be interpreted as unsigned char as specified by POSIX. The same problem is fixed in strncmp. Signed-off-by: Uwe Kleine-König Cc: Michael Buesch Cc: Andreas Schwab Cc: Andrew Morton Signed-off-by: Linus Torvalds --- lib/string.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/lib/string.c b/lib/string.c index b19b87af65a3..e96421ab9a9a 100644 --- a/lib/string.c +++ b/lib/string.c @@ -246,13 +246,17 @@ EXPORT_SYMBOL(strlcat); #undef strcmp int strcmp(const char *cs, const char *ct) { - signed char __res; + unsigned char c1, c2; while (1) { - if ((__res = *cs - *ct++) != 0 || !*cs++) + c1 = *cs++; + c2 = *ct++; + if (c1 != c2) + return c1 < c2 ? -1 : 1; + if (!c1) break; } - return __res; + return 0; } EXPORT_SYMBOL(strcmp); #endif @@ -266,14 +270,18 @@ EXPORT_SYMBOL(strcmp); */ int strncmp(const char *cs, const char *ct, size_t count) { - signed char __res = 0; + unsigned char c1, c2; while (count) { - if ((__res = *cs - *ct++) != 0 || !*cs++) + c1 = *cs++; + c2 = *ct++; + if (c1 != c2) + return c1 < c2 ? -1 : 1; + if (!c1) break; count--; } - return __res; + return 0; } EXPORT_SYMBOL(strncmp); #endif From ceb99fe071eb688255798d89be337affffa2b103 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 19 Nov 2009 14:29:39 +0100 Subject: [PATCH 519/743] mac80211: fix resume When mac80211 resumes, it currently first sets suspended to false so the driver can start doing things and we can receive frames. However, if we actually receive frames then it can end up starting some work which adds timers and then later runs into a BUG_ON in the timer code because it tries add_timer() on a pending timer. Fix this by keeping track of the resuming process by introducing a new variable 'resuming' which gets set to true early on instead of setting 'suspended' to false, and allow queueing work but not receiving frames while resuming. Reported-by: Maxim Levitsky Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ieee80211_i.h | 8 ++++++++ net/mac80211/util.c | 19 +++++++++---------- 2 files changed, 17 insertions(+), 10 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 588005c84a6d..a910bf1f092f 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -661,6 +661,14 @@ struct ieee80211_local { */ bool suspended; + /* + * Resuming is true while suspended, but when we're reprogramming the + * hardware -- at that time it's allowed to use ieee80211_queue_work() + * again even though some other parts of the stack are still suspended + * and we still drop received frames to avoid waking the stack. + */ + bool resuming; + /* * quiescing is true during the suspend process _only_ to * ease timer cancelling etc. diff --git a/net/mac80211/util.c b/net/mac80211/util.c index aeb65b3d2295..e6c08da8da26 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -520,9 +520,9 @@ EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces_atomic); */ static bool ieee80211_can_queue_work(struct ieee80211_local *local) { - if (WARN(local->suspended, "queueing ieee80211 work while " - "going to suspend\n")) - return false; + if (WARN(local->suspended && !local->resuming, + "queueing ieee80211 work while going to suspend\n")) + return false; return true; } @@ -1025,13 +1025,9 @@ int ieee80211_reconfig(struct ieee80211_local *local) struct sta_info *sta; unsigned long flags; int res; - bool from_suspend = local->suspended; - /* - * We're going to start the hardware, at that point - * we are no longer suspended and can RX frames. - */ - local->suspended = false; + if (local->suspended) + local->resuming = true; /* restart hardware */ if (local->open_count) { @@ -1129,11 +1125,14 @@ int ieee80211_reconfig(struct ieee80211_local *local) * If this is for hw restart things are still running. * We may want to change that later, however. */ - if (!from_suspend) + if (!local->suspended) return 0; #ifdef CONFIG_PM + /* first set suspended false, then resuming */ local->suspended = false; + mb(); + local->resuming = false; list_for_each_entry(sdata, &local->interfaces, list) { switch(sdata->vif.type) { From 3d7a641e544e428191667e8b1f83f96fa46dbd65 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:10:23 +0000 Subject: [PATCH 520/743] SLOW_WORK: Wait for outstanding work items belonging to a module to clear Wait for outstanding slow work items belonging to a module to clear when unregistering that module as a user of the facility. This prevents the put_ref code of a work item from being taken away before it returns. Signed-off-by: David Howells --- Documentation/slow-work.txt | 13 +++- fs/fscache/main.c | 6 +- fs/fscache/object.c | 1 + fs/fscache/operation.c | 1 + fs/gfs2/main.c | 4 +- fs/gfs2/recovery.c | 1 + include/linux/slow-work.h | 8 ++- kernel/slow-work.c | 132 ++++++++++++++++++++++++++++++++++-- 8 files changed, 150 insertions(+), 16 deletions(-) diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt index ebc50f808ea4..f12fda31dcdc 100644 --- a/Documentation/slow-work.txt +++ b/Documentation/slow-work.txt @@ -64,9 +64,11 @@ USING SLOW WORK ITEMS Firstly, a module or subsystem wanting to make use of slow work items must register its interest: - int ret = slow_work_register_user(); + int ret = slow_work_register_user(struct module *module); -This will return 0 if successful, or a -ve error upon failure. +This will return 0 if successful, or a -ve error upon failure. The module +pointer should be the module interested in using this facility (almost +certainly THIS_MODULE). Slow work items may then be set up by: @@ -110,7 +112,12 @@ operation. When all a module's slow work items have been processed, and the module has no further interest in the facility, it should unregister its interest: - slow_work_unregister_user(); + slow_work_unregister_user(struct module *module); + +The module pointer is used to wait for all outstanding work items for that +module before completing the unregistration. This prevents the put_ref() code +from being taken away before it completes. module should almost certainly be +THIS_MODULE. =============== diff --git a/fs/fscache/main.c b/fs/fscache/main.c index 4de41b597499..add6bdb53f04 100644 --- a/fs/fscache/main.c +++ b/fs/fscache/main.c @@ -48,7 +48,7 @@ static int __init fscache_init(void) { int ret; - ret = slow_work_register_user(); + ret = slow_work_register_user(THIS_MODULE); if (ret < 0) goto error_slow_work; @@ -80,7 +80,7 @@ error_kobj: error_cookie_jar: fscache_proc_cleanup(); error_proc: - slow_work_unregister_user(); + slow_work_unregister_user(THIS_MODULE); error_slow_work: return ret; } @@ -97,7 +97,7 @@ static void __exit fscache_exit(void) kobject_put(fscache_root); kmem_cache_destroy(fscache_cookie_jar); fscache_proc_cleanup(); - slow_work_unregister_user(); + slow_work_unregister_user(THIS_MODULE); printk(KERN_NOTICE "FS-Cache: Unloaded\n"); } diff --git a/fs/fscache/object.c b/fs/fscache/object.c index 392a41b1b79d..d236eb1d6f37 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -45,6 +45,7 @@ static void fscache_enqueue_dependents(struct fscache_object *); static void fscache_dequeue_object(struct fscache_object *); const struct slow_work_ops fscache_object_slow_work_ops = { + .owner = THIS_MODULE, .get_ref = fscache_object_slow_work_get_ref, .put_ref = fscache_object_slow_work_put_ref, .execute = fscache_object_slow_work_execute, diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c index e7f8d53b8b6b..f1a2857b2ff5 100644 --- a/fs/fscache/operation.c +++ b/fs/fscache/operation.c @@ -453,6 +453,7 @@ static void fscache_op_execute(struct slow_work *work) } const struct slow_work_ops fscache_op_slow_work_ops = { + .owner = THIS_MODULE, .get_ref = fscache_op_get_ref, .put_ref = fscache_op_put_ref, .execute = fscache_op_execute, diff --git a/fs/gfs2/main.c b/fs/gfs2/main.c index eacd78a5d082..5b31f7741a8f 100644 --- a/fs/gfs2/main.c +++ b/fs/gfs2/main.c @@ -114,7 +114,7 @@ static int __init init_gfs2_fs(void) if (error) goto fail_unregister; - error = slow_work_register_user(); + error = slow_work_register_user(THIS_MODULE); if (error) goto fail_slow; @@ -163,7 +163,7 @@ static void __exit exit_gfs2_fs(void) gfs2_unregister_debugfs(); unregister_filesystem(&gfs2_fs_type); unregister_filesystem(&gfs2meta_fs_type); - slow_work_unregister_user(); + slow_work_unregister_user(THIS_MODULE); kmem_cache_destroy(gfs2_quotad_cachep); kmem_cache_destroy(gfs2_rgrpd_cachep); diff --git a/fs/gfs2/recovery.c b/fs/gfs2/recovery.c index 59d2695509d3..b2bb779f09ed 100644 --- a/fs/gfs2/recovery.c +++ b/fs/gfs2/recovery.c @@ -593,6 +593,7 @@ fail: } struct slow_work_ops gfs2_recover_ops = { + .owner = THIS_MODULE, .get_ref = gfs2_recover_get_ref, .put_ref = gfs2_recover_put_ref, .execute = gfs2_recover_work, diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index b65c8881f07a..9adb2b30754f 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -24,6 +24,9 @@ struct slow_work; * The operations used to support slow work items */ struct slow_work_ops { + /* owner */ + struct module *owner; + /* get a ref on a work item * - return 0 if successful, -ve if not */ @@ -42,6 +45,7 @@ struct slow_work_ops { * queued */ struct slow_work { + struct module *owner; /* the owning module */ unsigned long flags; #define SLOW_WORK_PENDING 0 /* item pending (further) execution */ #define SLOW_WORK_EXECUTING 1 /* item currently executing */ @@ -84,8 +88,8 @@ static inline void vslow_work_init(struct slow_work *work, } extern int slow_work_enqueue(struct slow_work *work); -extern int slow_work_register_user(void); -extern void slow_work_unregister_user(void); +extern int slow_work_register_user(struct module *owner); +extern void slow_work_unregister_user(struct module *owner); #ifdef CONFIG_SYSCTL extern ctl_table slow_work_sysctls[]; diff --git a/kernel/slow-work.c b/kernel/slow-work.c index 0d31135efbf4..dd08f376e406 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -22,6 +22,8 @@ #define SLOW_WORK_OOM_TIMEOUT (5 * HZ) /* can't start new threads for 5s after * OOM */ +#define SLOW_WORK_THREAD_LIMIT 255 /* abs maximum number of slow-work threads */ + static void slow_work_cull_timeout(unsigned long); static void slow_work_oom_timeout(unsigned long); @@ -46,7 +48,7 @@ static unsigned vslow_work_proportion = 50; /* % of threads that may process #ifdef CONFIG_SYSCTL static const int slow_work_min_min_threads = 2; -static int slow_work_max_max_threads = 255; +static int slow_work_max_max_threads = SLOW_WORK_THREAD_LIMIT; static const int slow_work_min_vslow = 1; static const int slow_work_max_vslow = 99; @@ -97,6 +99,23 @@ static DEFINE_TIMER(slow_work_cull_timer, slow_work_cull_timeout, 0, 0); static DEFINE_TIMER(slow_work_oom_timer, slow_work_oom_timeout, 0, 0); static struct slow_work slow_work_new_thread; /* new thread starter */ +/* + * slow work ID allocation (use slow_work_queue_lock) + */ +static DECLARE_BITMAP(slow_work_ids, SLOW_WORK_THREAD_LIMIT); + +/* + * Unregistration tracking to prevent put_ref() from disappearing during module + * unload + */ +#ifdef CONFIG_MODULES +static struct module *slow_work_thread_processing[SLOW_WORK_THREAD_LIMIT]; +static struct module *slow_work_unreg_module; +static struct slow_work *slow_work_unreg_work_item; +static DECLARE_WAIT_QUEUE_HEAD(slow_work_unreg_wq); +static DEFINE_MUTEX(slow_work_unreg_sync_lock); +#endif + /* * The queues of work items and the lock governing access to them. These are * shared between all the CPUs. It doesn't make sense to have per-CPU queues @@ -149,8 +168,11 @@ static unsigned slow_work_calc_vsmax(void) * Attempt to execute stuff queued on a slow thread. Return true if we managed * it, false if there was nothing to do. */ -static bool slow_work_execute(void) +static bool slow_work_execute(int id) { +#ifdef CONFIG_MODULES + struct module *module; +#endif struct slow_work *work = NULL; unsigned vsmax; bool very_slow; @@ -186,6 +208,12 @@ static bool slow_work_execute(void) } else { very_slow = false; /* avoid the compiler warning */ } + +#ifdef CONFIG_MODULES + if (work) + slow_work_thread_processing[id] = work->owner; +#endif + spin_unlock_irq(&slow_work_queue_lock); if (!work) @@ -219,7 +247,18 @@ static bool slow_work_execute(void) spin_unlock_irq(&slow_work_queue_lock); } + /* sort out the race between module unloading and put_ref() */ work->ops->put_ref(work); + +#ifdef CONFIG_MODULES + module = slow_work_thread_processing[id]; + slow_work_thread_processing[id] = NULL; + smp_mb(); + if (slow_work_unreg_work_item == work || + slow_work_unreg_module == module) + wake_up_all(&slow_work_unreg_wq); +#endif + return true; auto_requeue: @@ -232,6 +271,7 @@ auto_requeue: else list_add_tail(&work->link, &slow_work_queue); spin_unlock_irq(&slow_work_queue_lock); + slow_work_thread_processing[id] = NULL; return true; } @@ -368,13 +408,22 @@ static inline bool slow_work_available(int vsmax) */ static int slow_work_thread(void *_data) { - int vsmax; + int vsmax, id; DEFINE_WAIT(wait); set_freezable(); set_user_nice(current, -5); + /* allocate ourselves an ID */ + spin_lock_irq(&slow_work_queue_lock); + id = find_first_zero_bit(slow_work_ids, SLOW_WORK_THREAD_LIMIT); + BUG_ON(id < 0 || id >= SLOW_WORK_THREAD_LIMIT); + __set_bit(id, slow_work_ids); + spin_unlock_irq(&slow_work_queue_lock); + + sprintf(current->comm, "kslowd%03u", id); + for (;;) { vsmax = vslow_work_proportion; vsmax *= atomic_read(&slow_work_thread_count); @@ -395,7 +444,7 @@ static int slow_work_thread(void *_data) vsmax *= atomic_read(&slow_work_thread_count); vsmax /= 100; - if (slow_work_available(vsmax) && slow_work_execute()) { + if (slow_work_available(vsmax) && slow_work_execute(id)) { cond_resched(); if (list_empty(&slow_work_queue) && list_empty(&vslow_work_queue) && @@ -412,6 +461,10 @@ static int slow_work_thread(void *_data) break; } + spin_lock_irq(&slow_work_queue_lock); + __clear_bit(id, slow_work_ids); + spin_unlock_irq(&slow_work_queue_lock); + if (atomic_dec_and_test(&slow_work_thread_count)) complete_and_exit(&slow_work_last_thread_exited, 0); return 0; @@ -475,6 +528,7 @@ static void slow_work_new_thread_execute(struct slow_work *work) } static const struct slow_work_ops slow_work_new_thread_ops = { + .owner = THIS_MODULE, .get_ref = slow_work_new_thread_get_ref, .put_ref = slow_work_new_thread_put_ref, .execute = slow_work_new_thread_execute, @@ -546,12 +600,13 @@ static int slow_work_max_threads_sysctl(struct ctl_table *table, int write, /** * slow_work_register_user - Register a user of the facility + * @module: The module about to make use of the facility * * Register a user of the facility, starting up the initial threads if there * aren't any other users at this point. This will return 0 if successful, or * an error if not. */ -int slow_work_register_user(void) +int slow_work_register_user(struct module *module) { struct task_struct *p; int loop; @@ -598,14 +653,79 @@ error: } EXPORT_SYMBOL(slow_work_register_user); +/* + * wait for all outstanding items from the calling module to complete + * - note that more items may be queued whilst we're waiting + */ +static void slow_work_wait_for_items(struct module *module) +{ + DECLARE_WAITQUEUE(myself, current); + struct slow_work *work; + int loop; + + mutex_lock(&slow_work_unreg_sync_lock); + add_wait_queue(&slow_work_unreg_wq, &myself); + + for (;;) { + spin_lock_irq(&slow_work_queue_lock); + + /* first of all, we wait for the last queued item in each list + * to be processed */ + list_for_each_entry_reverse(work, &vslow_work_queue, link) { + if (work->owner == module) { + set_current_state(TASK_UNINTERRUPTIBLE); + slow_work_unreg_work_item = work; + goto do_wait; + } + } + list_for_each_entry_reverse(work, &slow_work_queue, link) { + if (work->owner == module) { + set_current_state(TASK_UNINTERRUPTIBLE); + slow_work_unreg_work_item = work; + goto do_wait; + } + } + + /* then we wait for the items being processed to finish */ + slow_work_unreg_module = module; + smp_mb(); + for (loop = 0; loop < SLOW_WORK_THREAD_LIMIT; loop++) { + if (slow_work_thread_processing[loop] == module) + goto do_wait; + } + spin_unlock_irq(&slow_work_queue_lock); + break; /* okay, we're done */ + + do_wait: + spin_unlock_irq(&slow_work_queue_lock); + schedule(); + slow_work_unreg_work_item = NULL; + slow_work_unreg_module = NULL; + } + + remove_wait_queue(&slow_work_unreg_wq, &myself); + mutex_unlock(&slow_work_unreg_sync_lock); +} + /** * slow_work_unregister_user - Unregister a user of the facility + * @module: The module whose items should be cleared * * Unregister a user of the facility, killing all the threads if this was the * last one. + * + * This waits for all the work items belonging to the nominated module to go + * away before proceeding. */ -void slow_work_unregister_user(void) +void slow_work_unregister_user(struct module *module) { + /* first of all, wait for all outstanding items from the calling module + * to complete */ + if (module) + slow_work_wait_for_items(module); + + /* then we can actually go about shutting down the facility if need + * be */ mutex_lock(&slow_work_user_lock); BUG_ON(slow_work_user_count <= 0); From 4d8bb2cbccf6dccaada509aafeb01c6205c9d8c4 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 19 Nov 2009 18:10:39 +0000 Subject: [PATCH 521/743] SLOW_WORK: Make slow_work_ops ->get_ref/->put_ref optional Make the ability for the slow-work facility to take references on a work item optional as not everyone requires this. Even the internal slow-work stubs them out, so those can be got rid of too. Signed-off-by: Jens Axboe Signed-off-by: David Howells --- Documentation/slow-work.txt | 2 +- kernel/slow-work.c | 36 ++++++++++++++++-------------------- 2 files changed, 17 insertions(+), 21 deletions(-) diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt index f12fda31dcdc..c655c517fc68 100644 --- a/Documentation/slow-work.txt +++ b/Documentation/slow-work.txt @@ -125,7 +125,7 @@ ITEM OPERATIONS =============== Each work item requires a table of operations of type struct slow_work_ops. -All members are required: +Only ->execute() is required, getting and putting of a reference are optional. (*) Get a reference on an item: diff --git a/kernel/slow-work.c b/kernel/slow-work.c index dd08f376e406..fccf421eb5c1 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -145,6 +145,20 @@ static DECLARE_COMPLETION(slow_work_last_thread_exited); static int slow_work_user_count; static DEFINE_MUTEX(slow_work_user_lock); +static inline int slow_work_get_ref(struct slow_work *work) +{ + if (work->ops->get_ref) + return work->ops->get_ref(work); + + return 0; +} + +static inline void slow_work_put_ref(struct slow_work *work) +{ + if (work->ops->put_ref) + work->ops->put_ref(work); +} + /* * Calculate the maximum number of active threads in the pool that are * permitted to process very slow work items. @@ -248,7 +262,7 @@ static bool slow_work_execute(int id) } /* sort out the race between module unloading and put_ref() */ - work->ops->put_ref(work); + slow_work_put_ref(work); #ifdef CONFIG_MODULES module = slow_work_thread_processing[id]; @@ -309,7 +323,6 @@ int slow_work_enqueue(struct slow_work *work) BUG_ON(slow_work_user_count <= 0); BUG_ON(!work); BUG_ON(!work->ops); - BUG_ON(!work->ops->get_ref); /* when honouring an enqueue request, we only promise that we will run * the work function in the future; we do not promise to run it once @@ -339,7 +352,7 @@ int slow_work_enqueue(struct slow_work *work) if (test_bit(SLOW_WORK_EXECUTING, &work->flags)) { set_bit(SLOW_WORK_ENQ_DEFERRED, &work->flags); } else { - if (work->ops->get_ref(work) < 0) + if (slow_work_get_ref(work) < 0) goto cant_get_ref; if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) list_add_tail(&work->link, &vslow_work_queue); @@ -479,21 +492,6 @@ static void slow_work_cull_timeout(unsigned long data) wake_up(&slow_work_thread_wq); } -/* - * Get a reference on slow work thread starter - */ -static int slow_work_new_thread_get_ref(struct slow_work *work) -{ - return 0; -} - -/* - * Drop a reference on slow work thread starter - */ -static void slow_work_new_thread_put_ref(struct slow_work *work) -{ -} - /* * Start a new slow work thread */ @@ -529,8 +527,6 @@ static void slow_work_new_thread_execute(struct slow_work *work) static const struct slow_work_ops slow_work_new_thread_ops = { .owner = THIS_MODULE, - .get_ref = slow_work_new_thread_get_ref, - .put_ref = slow_work_new_thread_put_ref, .execute = slow_work_new_thread_execute, }; From 0160950297c08f8233c89b9f9e7dd59cfb080809 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 19 Nov 2009 18:10:43 +0000 Subject: [PATCH 522/743] SLOW_WORK: Add support for cancellation of slow work Add support for cancellation of queued slow work and delayed slow work items. The cancellation functions will wait for items that are pending or undergoing execution to be discarded by the slow work facility. Attempting to enqueue work that is in the process of being cancelled will result in ECANCELED. Signed-off-by: Jens Axboe Signed-off-by: David Howells --- Documentation/slow-work.txt | 12 +++++- include/linux/slow-work.h | 2 + kernel/slow-work.c | 81 ++++++++++++++++++++++++++++++++++--- 3 files changed, 88 insertions(+), 7 deletions(-) diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt index c655c517fc68..2e384bd4dead 100644 --- a/Documentation/slow-work.txt +++ b/Documentation/slow-work.txt @@ -108,7 +108,17 @@ on the item, 0 otherwise. The items are reference counted, so there ought to be no need for a flush -operation. When all a module's slow work items have been processed, and the +operation. But as the reference counting is optional, means to cancel +existing work items are also included: + + cancel_slow_work(&myitem); + +can be used to cancel pending work. The above cancel function waits for +existing work to have been executed (or prevent execution of them, depending +on timing). + + +When all a module's slow work items have been processed, and the module has no further interest in the facility, it should unregister its interest: diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index 9adb2b30754f..eef20182d5b4 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -51,6 +51,7 @@ struct slow_work { #define SLOW_WORK_EXECUTING 1 /* item currently executing */ #define SLOW_WORK_ENQ_DEFERRED 2 /* item enqueue deferred */ #define SLOW_WORK_VERY_SLOW 3 /* item is very slow */ +#define SLOW_WORK_CANCELLING 4 /* item is being cancelled, don't enqueue */ const struct slow_work_ops *ops; /* operations table for this item */ struct list_head link; /* link in queue */ }; @@ -88,6 +89,7 @@ static inline void vslow_work_init(struct slow_work *work, } extern int slow_work_enqueue(struct slow_work *work); +extern void slow_work_cancel(struct slow_work *work); extern int slow_work_register_user(struct module *owner); extern void slow_work_unregister_user(struct module *owner); diff --git a/kernel/slow-work.c b/kernel/slow-work.c index fccf421eb5c1..671cc434532a 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -236,12 +236,17 @@ static bool slow_work_execute(int id) if (!test_and_clear_bit(SLOW_WORK_PENDING, &work->flags)) BUG(); - work->ops->execute(work); + /* don't execute if the work is in the process of being cancelled */ + if (!test_bit(SLOW_WORK_CANCELLING, &work->flags)) + work->ops->execute(work); if (very_slow) atomic_dec(&vslow_work_executing_count); clear_bit_unlock(SLOW_WORK_EXECUTING, &work->flags); + /* wake up anyone waiting for this work to be complete */ + wake_up_bit(&work->flags, SLOW_WORK_EXECUTING); + /* if someone tried to enqueue the item whilst we were executing it, * then it'll be left unenqueued to avoid multiple threads trying to * execute it simultaneously @@ -314,11 +319,16 @@ auto_requeue: * allowed to pick items to execute. This ensures that very slow items won't * overly block ones that are just ordinarily slow. * - * Returns 0 if successful, -EAGAIN if not. + * Returns 0 if successful, -EAGAIN if not (or -ECANCELED if cancelled work is + * attempted queued) */ int slow_work_enqueue(struct slow_work *work) { unsigned long flags; + int ret; + + if (test_bit(SLOW_WORK_CANCELLING, &work->flags)) + return -ECANCELED; BUG_ON(slow_work_user_count <= 0); BUG_ON(!work); @@ -335,6 +345,9 @@ int slow_work_enqueue(struct slow_work *work) if (!test_and_set_bit_lock(SLOW_WORK_PENDING, &work->flags)) { spin_lock_irqsave(&slow_work_queue_lock, flags); + if (unlikely(test_bit(SLOW_WORK_CANCELLING, &work->flags))) + goto cancelled; + /* we promise that we will not attempt to execute the work * function in more than one thread simultaneously * @@ -352,8 +365,9 @@ int slow_work_enqueue(struct slow_work *work) if (test_bit(SLOW_WORK_EXECUTING, &work->flags)) { set_bit(SLOW_WORK_ENQ_DEFERRED, &work->flags); } else { - if (slow_work_get_ref(work) < 0) - goto cant_get_ref; + ret = slow_work_get_ref(work); + if (ret < 0) + goto failed; if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) list_add_tail(&work->link, &vslow_work_queue); else @@ -365,12 +379,67 @@ int slow_work_enqueue(struct slow_work *work) } return 0; -cant_get_ref: +cancelled: + ret = -ECANCELED; +failed: spin_unlock_irqrestore(&slow_work_queue_lock, flags); - return -EAGAIN; + return ret; } EXPORT_SYMBOL(slow_work_enqueue); +static int slow_work_wait(void *word) +{ + schedule(); + return 0; +} + +/** + * slow_work_cancel - Cancel a slow work item + * @work: The work item to cancel + * + * This function will cancel a previously enqueued work item. If we cannot + * cancel the work item, it is guarenteed to have run when this function + * returns. + */ +void slow_work_cancel(struct slow_work *work) +{ + bool wait = true, put = false; + + set_bit(SLOW_WORK_CANCELLING, &work->flags); + + spin_lock_irq(&slow_work_queue_lock); + + if (test_bit(SLOW_WORK_PENDING, &work->flags) && + !list_empty(&work->link)) { + /* the link in the pending queue holds a reference on the item + * that we will need to release */ + list_del_init(&work->link); + wait = false; + put = true; + clear_bit(SLOW_WORK_PENDING, &work->flags); + + } else if (test_and_clear_bit(SLOW_WORK_ENQ_DEFERRED, &work->flags)) { + /* the executor is holding our only reference on the item, so + * we merely need to wait for it to finish executing */ + clear_bit(SLOW_WORK_PENDING, &work->flags); + } + + spin_unlock_irq(&slow_work_queue_lock); + + /* the EXECUTING flag is set by the executor whilst the spinlock is set + * and before the item is dequeued - so assuming the above doesn't + * actually dequeue it, simply waiting for the EXECUTING flag to be + * released here should be sufficient */ + if (wait) + wait_on_bit(&work->flags, SLOW_WORK_EXECUTING, slow_work_wait, + TASK_UNINTERRUPTIBLE); + + clear_bit(SLOW_WORK_CANCELLING, &work->flags); + if (put) + slow_work_put_ref(work); +} +EXPORT_SYMBOL(slow_work_cancel); + /* * Schedule a cull of the thread pool at some time in the near future */ From 6b8268b17a1ffc942bc72d7d00274e433d6b6719 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 19 Nov 2009 18:10:47 +0000 Subject: [PATCH 523/743] SLOW_WORK: Add delayed_slow_work support This adds support for starting slow work with a delay, similar to the functionality we have for workqueues. Signed-off-by: Jens Axboe Signed-off-by: David Howells --- Documentation/slow-work.txt | 16 ++++- include/linux/slow-work.h | 29 ++++++++ kernel/slow-work.c | 129 +++++++++++++++++++++++++++++++++++- 3 files changed, 171 insertions(+), 3 deletions(-) diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt index 2e384bd4dead..a9d1b0ffdded 100644 --- a/Documentation/slow-work.txt +++ b/Documentation/slow-work.txt @@ -41,6 +41,13 @@ expand files, provided the time taken to do so isn't too long. Operations of both types may sleep during execution, thus tying up the thread loaned to it. +A further class of work item is available, based on the slow work item class: + + (*) Delayed slow work items. + +These are slow work items that have a timer to defer queueing of the item for +a while. + THREAD-TO-CLASS ALLOCATION -------------------------- @@ -93,6 +100,10 @@ Slow work items may then be set up by: slow_work_init(&myitem, &myitem_ops); + or: + + delayed_slow_work_init(&myitem, &myitem_ops); + or: vslow_work_init(&myitem, &myitem_ops); @@ -104,7 +115,9 @@ A suitably set up work item can then be enqueued for processing: int ret = slow_work_enqueue(&myitem); This will return a -ve error if the thread pool is unable to gain a reference -on the item, 0 otherwise. +on the item, 0 otherwise, or (for delayed work): + + int ret = delayed_slow_work_enqueue(&myitem, my_jiffy_delay); The items are reference counted, so there ought to be no need for a flush @@ -112,6 +125,7 @@ operation. But as the reference counting is optional, means to cancel existing work items are also included: cancel_slow_work(&myitem); + cancel_delayed_slow_work(&myitem); can be used to cancel pending work. The above cancel function waits for existing work to have been executed (or prevent execution of them, depending diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index eef20182d5b4..b245b9a9cc0b 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -17,6 +17,7 @@ #ifdef CONFIG_SLOW_WORK #include +#include struct slow_work; @@ -52,10 +53,16 @@ struct slow_work { #define SLOW_WORK_ENQ_DEFERRED 2 /* item enqueue deferred */ #define SLOW_WORK_VERY_SLOW 3 /* item is very slow */ #define SLOW_WORK_CANCELLING 4 /* item is being cancelled, don't enqueue */ +#define SLOW_WORK_DELAYED 5 /* item is struct delayed_slow_work with active timer */ const struct slow_work_ops *ops; /* operations table for this item */ struct list_head link; /* link in queue */ }; +struct delayed_slow_work { + struct slow_work work; + struct timer_list timer; +}; + /** * slow_work_init - Initialise a slow work item * @work: The work item to initialise @@ -71,6 +78,20 @@ static inline void slow_work_init(struct slow_work *work, INIT_LIST_HEAD(&work->link); } +/** + * slow_work_init - Initialise a delayed slow work item + * @work: The work item to initialise + * @ops: The operations to use to handle the slow work item + * + * Initialise a delayed slow work item. + */ +static inline void delayed_slow_work_init(struct delayed_slow_work *dwork, + const struct slow_work_ops *ops) +{ + init_timer(&dwork->timer); + slow_work_init(&dwork->work, ops); +} + /** * vslow_work_init - Initialise a very slow work item * @work: The work item to initialise @@ -93,6 +114,14 @@ extern void slow_work_cancel(struct slow_work *work); extern int slow_work_register_user(struct module *owner); extern void slow_work_unregister_user(struct module *owner); +extern int delayed_slow_work_enqueue(struct delayed_slow_work *dwork, + unsigned long delay); + +static inline void delayed_slow_work_cancel(struct delayed_slow_work *dwork) +{ + slow_work_cancel(&dwork->work); +} + #ifdef CONFIG_SYSCTL extern ctl_table slow_work_sysctls[]; #endif diff --git a/kernel/slow-work.c b/kernel/slow-work.c index 671cc434532a..f67e1daae93d 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -406,11 +406,40 @@ void slow_work_cancel(struct slow_work *work) bool wait = true, put = false; set_bit(SLOW_WORK_CANCELLING, &work->flags); + smp_mb(); + + /* if the work item is a delayed work item with an active timer, we + * need to wait for the timer to finish _before_ getting the spinlock, + * lest we deadlock against the timer routine + * + * the timer routine will leave DELAYED set if it notices the + * CANCELLING flag in time + */ + if (test_bit(SLOW_WORK_DELAYED, &work->flags)) { + struct delayed_slow_work *dwork = + container_of(work, struct delayed_slow_work, work); + del_timer_sync(&dwork->timer); + } spin_lock_irq(&slow_work_queue_lock); - if (test_bit(SLOW_WORK_PENDING, &work->flags) && - !list_empty(&work->link)) { + if (test_bit(SLOW_WORK_DELAYED, &work->flags)) { + /* the timer routine aborted or never happened, so we are left + * holding the timer's reference on the item and should just + * drop the pending flag and wait for any ongoing execution to + * finish */ + struct delayed_slow_work *dwork = + container_of(work, struct delayed_slow_work, work); + + BUG_ON(timer_pending(&dwork->timer)); + BUG_ON(!list_empty(&work->link)); + + clear_bit(SLOW_WORK_DELAYED, &work->flags); + put = true; + clear_bit(SLOW_WORK_PENDING, &work->flags); + + } else if (test_bit(SLOW_WORK_PENDING, &work->flags) && + !list_empty(&work->link)) { /* the link in the pending queue holds a reference on the item * that we will need to release */ list_del_init(&work->link); @@ -440,6 +469,102 @@ void slow_work_cancel(struct slow_work *work) } EXPORT_SYMBOL(slow_work_cancel); +/* + * Handle expiry of the delay timer, indicating that a delayed slow work item + * should now be queued if not cancelled + */ +static void delayed_slow_work_timer(unsigned long data) +{ + struct slow_work *work = (struct slow_work *) data; + unsigned long flags; + bool queued = false, put = false; + + spin_lock_irqsave(&slow_work_queue_lock, flags); + if (likely(!test_bit(SLOW_WORK_CANCELLING, &work->flags))) { + clear_bit(SLOW_WORK_DELAYED, &work->flags); + + if (test_bit(SLOW_WORK_EXECUTING, &work->flags)) { + /* we discard the reference the timer was holding in + * favour of the one the executor holds */ + set_bit(SLOW_WORK_ENQ_DEFERRED, &work->flags); + put = true; + } else { + if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) + list_add_tail(&work->link, &vslow_work_queue); + else + list_add_tail(&work->link, &slow_work_queue); + queued = true; + } + } + + spin_unlock_irqrestore(&slow_work_queue_lock, flags); + if (put) + slow_work_put_ref(work); + if (queued) + wake_up(&slow_work_thread_wq); +} + +/** + * delayed_slow_work_enqueue - Schedule a delayed slow work item for processing + * @dwork: The delayed work item to queue + * @delay: When to start executing the work, in jiffies from now + * + * This is similar to slow_work_enqueue(), but it adds a delay before the work + * is actually queued for processing. + * + * The item can have delayed processing requested on it whilst it is being + * executed. The delay will begin immediately, and if it expires before the + * item finishes executing, the item will be placed back on the queue when it + * has done executing. + */ +int delayed_slow_work_enqueue(struct delayed_slow_work *dwork, + unsigned long delay) +{ + struct slow_work *work = &dwork->work; + unsigned long flags; + int ret; + + if (delay == 0) + return slow_work_enqueue(&dwork->work); + + BUG_ON(slow_work_user_count <= 0); + BUG_ON(!work); + BUG_ON(!work->ops); + + if (test_bit(SLOW_WORK_CANCELLING, &work->flags)) + return -ECANCELED; + + if (!test_and_set_bit_lock(SLOW_WORK_PENDING, &work->flags)) { + spin_lock_irqsave(&slow_work_queue_lock, flags); + + if (test_bit(SLOW_WORK_CANCELLING, &work->flags)) + goto cancelled; + + /* the timer holds a reference whilst it is pending */ + ret = work->ops->get_ref(work); + if (ret < 0) + goto cant_get_ref; + + if (test_and_set_bit(SLOW_WORK_DELAYED, &work->flags)) + BUG(); + dwork->timer.expires = jiffies + delay; + dwork->timer.data = (unsigned long) work; + dwork->timer.function = delayed_slow_work_timer; + add_timer(&dwork->timer); + + spin_unlock_irqrestore(&slow_work_queue_lock, flags); + } + + return 0; + +cancelled: + ret = -ECANCELED; +cant_get_ref: + spin_unlock_irqrestore(&slow_work_queue_lock, flags); + return ret; +} +EXPORT_SYMBOL(delayed_slow_work_enqueue); + /* * Schedule a cull of the thread pool at some time in the near future */ From 8fba10a42d191de612e60e7009c8f0313f90a9b3 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:10:51 +0000 Subject: [PATCH 524/743] SLOW_WORK: Allow the work items to be viewed through a /proc file Allow the executing and queued work items to be viewed through a /proc file for debugging purposes. The contents look something like the following: THR PID ITEM ADDR FL MARK DESC === ===== ================ == ===== ========== 0 3005 ffff880023f52348 a 952ms FSC: OBJ17d3: LOOK 1 3006 ffff880024e33668 2 160ms FSC: OBJ17e5 OP60d3b: Write1/Store fl=2 2 3165 ffff8800296dd180 a 424ms FSC: OBJ17e4: LOOK 3 4089 ffff8800262c8d78 a 212ms FSC: OBJ17ea: CRTN 4 4090 ffff88002792bed8 2 388ms FSC: OBJ17e8 OP60d36: Write1/Store fl=2 5 4092 ffff88002a0ef308 2 388ms FSC: OBJ17e7 OP60d2e: Write1/Store fl=2 6 4094 ffff88002abaf4b8 2 132ms FSC: OBJ17e2 OP60d4e: Write1/Store fl=2 7 4095 ffff88002bb188e0 a 388ms FSC: OBJ17e9: CRTN vsq - ffff880023d99668 1 308ms FSC: OBJ17e0 OP60f91: Write1/EnQ fl=2 vsq - ffff8800295d1740 1 212ms FSC: OBJ16be OP4d4b6: Write1/EnQ fl=2 vsq - ffff880025ba3308 1 160ms FSC: OBJ179a OP58dec: Write1/EnQ fl=2 vsq - ffff880024ec83e0 1 160ms FSC: OBJ17ae OP599f2: Write1/EnQ fl=2 vsq - ffff880026618e00 1 160ms FSC: OBJ17e6 OP60d33: Write1/EnQ fl=2 vsq - ffff880025a2a4b8 1 132ms FSC: OBJ16a2 OP4d583: Write1/EnQ fl=2 vsq - ffff880023cbe6d8 9 212ms FSC: OBJ17eb: LOOK vsq - ffff880024d37590 9 212ms FSC: OBJ17ec: LOOK vsq - ffff880027746cb0 9 212ms FSC: OBJ17ed: LOOK vsq - ffff880024d37ae8 9 212ms FSC: OBJ17ee: LOOK vsq - ffff880024d37cb0 9 212ms FSC: OBJ17ef: LOOK vsq - ffff880025036550 9 212ms FSC: OBJ17f0: LOOK vsq - ffff8800250368e0 9 212ms FSC: OBJ17f1: LOOK vsq - ffff880025036aa8 9 212ms FSC: OBJ17f2: LOOK In the 'THR' column, executing items show the thread they're occupying and queued threads indicate which queue they're on. 'PID' shows the process ID of a slow-work thread that's executing something. 'FL' shows the work item flags. 'MARK' indicates how long since an item was queued or began executing. Lastly, the 'DESC' column permits the owner of an item to give some information. Signed-off-by: David Howells --- Documentation/slow-work.txt | 60 +++++++++- include/linux/slow-work.h | 11 ++ init/Kconfig | 10 ++ kernel/Makefile | 1 + kernel/slow-work-proc.c | 227 ++++++++++++++++++++++++++++++++++++ kernel/slow-work.c | 44 +++++-- kernel/slow-work.h | 72 ++++++++++++ 7 files changed, 413 insertions(+), 12 deletions(-) create mode 100644 kernel/slow-work-proc.c create mode 100644 kernel/slow-work.h diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt index a9d1b0ffdded..f120238e70fe 100644 --- a/Documentation/slow-work.txt +++ b/Documentation/slow-work.txt @@ -149,7 +149,8 @@ ITEM OPERATIONS =============== Each work item requires a table of operations of type struct slow_work_ops. -Only ->execute() is required, getting and putting of a reference are optional. +Only ->execute() is required; the getting and putting of a reference and the +describing of an item are all optional. (*) Get a reference on an item: @@ -179,6 +180,16 @@ Only ->execute() is required, getting and putting of a reference are optional. This should perform the work required of the item. It may sleep, it may perform disk I/O and it may wait for locks. + (*) View an item through /proc: + + void (*desc)(struct slow_work *work, struct seq_file *m); + + If supplied, this should print to 'm' a small string describing the work + the item is to do. This should be no more than about 40 characters, and + shouldn't include a newline character. + + See the 'Viewing executing and queued items' section below. + ================== POOL CONFIGURATION @@ -203,3 +214,50 @@ The slow-work thread pool has a number of configurables: is bounded to between 1 and one fewer than the number of active threads. This ensures there is always at least one thread that can process very slow work items, and always at least one thread that won't. + + +================================== +VIEWING EXECUTING AND QUEUED ITEMS +================================== + +If CONFIG_SLOW_WORK_PROC is enabled, a proc file is made available: + + /proc/slow_work_rq + +through which the list of work items being executed and the queues of items to +be executed may be viewed. The owner of a work item is given the chance to +add some information of its own. + +The contents look something like the following: + + THR PID ITEM ADDR FL MARK DESC + === ===== ================ == ===== ========== + 0 3005 ffff880023f52348 a 952ms FSC: OBJ17d3: LOOK + 1 3006 ffff880024e33668 2 160ms FSC: OBJ17e5 OP60d3b: Write1/Store fl=2 + 2 3165 ffff8800296dd180 a 424ms FSC: OBJ17e4: LOOK + 3 4089 ffff8800262c8d78 a 212ms FSC: OBJ17ea: CRTN + 4 4090 ffff88002792bed8 2 388ms FSC: OBJ17e8 OP60d36: Write1/Store fl=2 + 5 4092 ffff88002a0ef308 2 388ms FSC: OBJ17e7 OP60d2e: Write1/Store fl=2 + 6 4094 ffff88002abaf4b8 2 132ms FSC: OBJ17e2 OP60d4e: Write1/Store fl=2 + 7 4095 ffff88002bb188e0 a 388ms FSC: OBJ17e9: CRTN + vsq - ffff880023d99668 1 308ms FSC: OBJ17e0 OP60f91: Write1/EnQ fl=2 + vsq - ffff8800295d1740 1 212ms FSC: OBJ16be OP4d4b6: Write1/EnQ fl=2 + vsq - ffff880025ba3308 1 160ms FSC: OBJ179a OP58dec: Write1/EnQ fl=2 + vsq - ffff880024ec83e0 1 160ms FSC: OBJ17ae OP599f2: Write1/EnQ fl=2 + vsq - ffff880026618e00 1 160ms FSC: OBJ17e6 OP60d33: Write1/EnQ fl=2 + vsq - ffff880025a2a4b8 1 132ms FSC: OBJ16a2 OP4d583: Write1/EnQ fl=2 + vsq - ffff880023cbe6d8 9 212ms FSC: OBJ17eb: LOOK + vsq - ffff880024d37590 9 212ms FSC: OBJ17ec: LOOK + vsq - ffff880027746cb0 9 212ms FSC: OBJ17ed: LOOK + vsq - ffff880024d37ae8 9 212ms FSC: OBJ17ee: LOOK + vsq - ffff880024d37cb0 9 212ms FSC: OBJ17ef: LOOK + vsq - ffff880025036550 9 212ms FSC: OBJ17f0: LOOK + vsq - ffff8800250368e0 9 212ms FSC: OBJ17f1: LOOK + vsq - ffff880025036aa8 9 212ms FSC: OBJ17f2: LOOK + +In the 'THR' column, executing items show the thread they're occupying and +queued threads indicate which queue they're on. 'PID' shows the process ID of +a slow-work thread that's executing something. 'FL' shows the work item flags. +'MARK' indicates how long since an item was queued or began executing. Lastly, +the 'DESC' column permits the owner of an item to give some information. + diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index b245b9a9cc0b..f41485145ed1 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -20,6 +20,9 @@ #include struct slow_work; +#ifdef CONFIG_SLOW_WORK_PROC +struct seq_file; +#endif /* * The operations used to support slow work items @@ -38,6 +41,11 @@ struct slow_work_ops { /* execute a work item */ void (*execute)(struct slow_work *work); + +#ifdef CONFIG_SLOW_WORK_PROC + /* describe a work item for /proc */ + void (*desc)(struct slow_work *work, struct seq_file *m); +#endif }; /* @@ -56,6 +64,9 @@ struct slow_work { #define SLOW_WORK_DELAYED 5 /* item is struct delayed_slow_work with active timer */ const struct slow_work_ops *ops; /* operations table for this item */ struct list_head link; /* link in queue */ +#ifdef CONFIG_SLOW_WORK_PROC + struct timespec mark; /* jiffies at which queued or exec begun */ +#endif }; struct delayed_slow_work { diff --git a/init/Kconfig b/init/Kconfig index 9e03ef8b311e..ab5c64801fe5 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -1098,6 +1098,16 @@ config SLOW_WORK See Documentation/slow-work.txt. +config SLOW_WORK_PROC + bool "Slow work debugging through /proc" + default n + depends on SLOW_WORK && PROC_FS + help + Display the contents of the slow work run queue through /proc, + including items currently executing. + + See Documentation/slow-work.txt. + endmenu # General setup config HAVE_GENERIC_DMA_COHERENT diff --git a/kernel/Makefile b/kernel/Makefile index b8d4cd8ac0b9..776ffed1556d 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -94,6 +94,7 @@ obj-$(CONFIG_X86_DS) += trace/ obj-$(CONFIG_RING_BUFFER) += trace/ obj-$(CONFIG_SMP) += sched_cpupri.o obj-$(CONFIG_SLOW_WORK) += slow-work.o +obj-$(CONFIG_SLOW_WORK_PROC) += slow-work-proc.o obj-$(CONFIG_PERF_EVENTS) += perf_event.o ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y) diff --git a/kernel/slow-work-proc.c b/kernel/slow-work-proc.c new file mode 100644 index 000000000000..3988032571f5 --- /dev/null +++ b/kernel/slow-work-proc.c @@ -0,0 +1,227 @@ +/* Slow work debugging + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include "slow-work.h" + +#define ITERATOR_SHIFT (BITS_PER_LONG - 4) +#define ITERATOR_SELECTOR (0xfUL << ITERATOR_SHIFT) +#define ITERATOR_COUNTER (~ITERATOR_SELECTOR) + +void slow_work_new_thread_desc(struct slow_work *work, struct seq_file *m) +{ + seq_puts(m, "Slow-work: New thread"); +} + +/* + * Render the time mark field on a work item into a 5-char time with units plus + * a space + */ +static void slow_work_print_mark(struct seq_file *m, struct slow_work *work) +{ + struct timespec now, diff; + + now = CURRENT_TIME; + diff = timespec_sub(now, work->mark); + + if (diff.tv_sec < 0) + seq_puts(m, " -ve "); + else if (diff.tv_sec == 0 && diff.tv_nsec < 1000) + seq_printf(m, "%3luns ", diff.tv_nsec); + else if (diff.tv_sec == 0 && diff.tv_nsec < 1000000) + seq_printf(m, "%3luus ", diff.tv_nsec / 1000); + else if (diff.tv_sec == 0 && diff.tv_nsec < 1000000000) + seq_printf(m, "%3lums ", diff.tv_nsec / 1000000); + else if (diff.tv_sec <= 1) + seq_puts(m, " 1s "); + else if (diff.tv_sec < 60) + seq_printf(m, "%4lus ", diff.tv_sec); + else if (diff.tv_sec < 60 * 60) + seq_printf(m, "%4lum ", diff.tv_sec / 60); + else if (diff.tv_sec < 60 * 60 * 24) + seq_printf(m, "%4luh ", diff.tv_sec / 3600); + else + seq_puts(m, "exces "); +} + +/* + * Describe a slow work item for /proc + */ +static int slow_work_runqueue_show(struct seq_file *m, void *v) +{ + struct slow_work *work; + struct list_head *p = v; + unsigned long id; + + switch ((unsigned long) v) { + case 1: + seq_puts(m, "THR PID ITEM ADDR FL MARK DESC\n"); + return 0; + case 2: + seq_puts(m, "=== ===== ================ == ===== ==========\n"); + return 0; + + case 3 ... 3 + SLOW_WORK_THREAD_LIMIT - 1: + id = (unsigned long) v - 3; + + read_lock(&slow_work_execs_lock); + work = slow_work_execs[id]; + if (work) { + smp_read_barrier_depends(); + + seq_printf(m, "%3lu %5d %16p %2lx ", + id, slow_work_pids[id], work, work->flags); + slow_work_print_mark(m, work); + + if (work->ops->desc) + work->ops->desc(work, m); + seq_putc(m, '\n'); + } + read_unlock(&slow_work_execs_lock); + return 0; + + default: + work = list_entry(p, struct slow_work, link); + seq_printf(m, "%3s - %16p %2lx ", + work->flags & SLOW_WORK_VERY_SLOW ? "vsq" : "sq", + work, work->flags); + slow_work_print_mark(m, work); + + if (work->ops->desc) + work->ops->desc(work, m); + seq_putc(m, '\n'); + return 0; + } +} + +/* + * map the iterator to a work item + */ +static void *slow_work_runqueue_index(struct seq_file *m, loff_t *_pos) +{ + struct list_head *p; + unsigned long count, id; + + switch (*_pos >> ITERATOR_SHIFT) { + case 0x0: + if (*_pos == 0) + *_pos = 1; + if (*_pos < 3) + return (void *)(unsigned long) *_pos; + if (*_pos < 3 + SLOW_WORK_THREAD_LIMIT) + for (id = *_pos - 3; + id < SLOW_WORK_THREAD_LIMIT; + id++, (*_pos)++) + if (slow_work_execs[id]) + return (void *)(unsigned long) *_pos; + *_pos = 0x1UL << ITERATOR_SHIFT; + + case 0x1: + count = *_pos & ITERATOR_COUNTER; + list_for_each(p, &slow_work_queue) { + if (count == 0) + return p; + count--; + } + *_pos = 0x2UL << ITERATOR_SHIFT; + + case 0x2: + count = *_pos & ITERATOR_COUNTER; + list_for_each(p, &vslow_work_queue) { + if (count == 0) + return p; + count--; + } + *_pos = 0x3UL << ITERATOR_SHIFT; + + default: + return NULL; + } +} + +/* + * set up the iterator to start reading from the first line + */ +static void *slow_work_runqueue_start(struct seq_file *m, loff_t *_pos) +{ + spin_lock_irq(&slow_work_queue_lock); + return slow_work_runqueue_index(m, _pos); +} + +/* + * move to the next line + */ +static void *slow_work_runqueue_next(struct seq_file *m, void *v, loff_t *_pos) +{ + struct list_head *p = v; + unsigned long selector = *_pos >> ITERATOR_SHIFT; + + (*_pos)++; + switch (selector) { + case 0x0: + return slow_work_runqueue_index(m, _pos); + + case 0x1: + if (*_pos >> ITERATOR_SHIFT == 0x1) { + p = p->next; + if (p != &slow_work_queue) + return p; + } + *_pos = 0x2UL << ITERATOR_SHIFT; + p = &vslow_work_queue; + + case 0x2: + if (*_pos >> ITERATOR_SHIFT == 0x2) { + p = p->next; + if (p != &vslow_work_queue) + return p; + } + *_pos = 0x3UL << ITERATOR_SHIFT; + + default: + return NULL; + } +} + +/* + * clean up after reading + */ +static void slow_work_runqueue_stop(struct seq_file *m, void *v) +{ + spin_unlock_irq(&slow_work_queue_lock); +} + +static const struct seq_operations slow_work_runqueue_ops = { + .start = slow_work_runqueue_start, + .stop = slow_work_runqueue_stop, + .next = slow_work_runqueue_next, + .show = slow_work_runqueue_show, +}; + +/* + * open "/proc/slow_work_rq" to list queue contents + */ +static int slow_work_runqueue_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &slow_work_runqueue_ops); +} + +const struct file_operations slow_work_runqueue_fops = { + .owner = THIS_MODULE, + .open = slow_work_runqueue_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; diff --git a/kernel/slow-work.c b/kernel/slow-work.c index f67e1daae93d..b763bc2d2670 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -16,13 +16,8 @@ #include #include #include - -#define SLOW_WORK_CULL_TIMEOUT (5 * HZ) /* cull threads 5s after running out of - * things to do */ -#define SLOW_WORK_OOM_TIMEOUT (5 * HZ) /* can't start new threads for 5s after - * OOM */ - -#define SLOW_WORK_THREAD_LIMIT 255 /* abs maximum number of slow-work threads */ +#include +#include "slow-work.h" static void slow_work_cull_timeout(unsigned long); static void slow_work_oom_timeout(unsigned long); @@ -116,6 +111,15 @@ static DECLARE_WAIT_QUEUE_HEAD(slow_work_unreg_wq); static DEFINE_MUTEX(slow_work_unreg_sync_lock); #endif +/* + * Data for tracking currently executing items for indication through /proc + */ +#ifdef CONFIG_SLOW_WORK_PROC +struct slow_work *slow_work_execs[SLOW_WORK_THREAD_LIMIT]; +pid_t slow_work_pids[SLOW_WORK_THREAD_LIMIT]; +DEFINE_RWLOCK(slow_work_execs_lock); +#endif + /* * The queues of work items and the lock governing access to them. These are * shared between all the CPUs. It doesn't make sense to have per-CPU queues @@ -124,9 +128,9 @@ static DEFINE_MUTEX(slow_work_unreg_sync_lock); * There are two queues of work items: one for slow work items, and one for * very slow work items. */ -static LIST_HEAD(slow_work_queue); -static LIST_HEAD(vslow_work_queue); -static DEFINE_SPINLOCK(slow_work_queue_lock); +LIST_HEAD(slow_work_queue); +LIST_HEAD(vslow_work_queue); +DEFINE_SPINLOCK(slow_work_queue_lock); /* * The thread controls. A variable used to signal to the threads that they @@ -182,7 +186,7 @@ static unsigned slow_work_calc_vsmax(void) * Attempt to execute stuff queued on a slow thread. Return true if we managed * it, false if there was nothing to do. */ -static bool slow_work_execute(int id) +static noinline bool slow_work_execute(int id) { #ifdef CONFIG_MODULES struct module *module; @@ -227,6 +231,10 @@ static bool slow_work_execute(int id) if (work) slow_work_thread_processing[id] = work->owner; #endif + if (work) { + slow_work_mark_time(work); + slow_work_begin_exec(id, work); + } spin_unlock_irq(&slow_work_queue_lock); @@ -247,6 +255,8 @@ static bool slow_work_execute(int id) /* wake up anyone waiting for this work to be complete */ wake_up_bit(&work->flags, SLOW_WORK_EXECUTING); + slow_work_end_exec(id, work); + /* if someone tried to enqueue the item whilst we were executing it, * then it'll be left unenqueued to avoid multiple threads trying to * execute it simultaneously @@ -285,6 +295,7 @@ auto_requeue: * - we transfer our ref on the item back to the appropriate queue * - don't wake another thread up as we're awake already */ + slow_work_mark_time(work); if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) list_add_tail(&work->link, &vslow_work_queue); else @@ -368,6 +379,7 @@ int slow_work_enqueue(struct slow_work *work) ret = slow_work_get_ref(work); if (ret < 0) goto failed; + slow_work_mark_time(work); if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) list_add_tail(&work->link, &vslow_work_queue); else @@ -489,6 +501,7 @@ static void delayed_slow_work_timer(unsigned long data) set_bit(SLOW_WORK_ENQ_DEFERRED, &work->flags); put = true; } else { + slow_work_mark_time(work); if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) list_add_tail(&work->link, &vslow_work_queue); else @@ -627,6 +640,7 @@ static int slow_work_thread(void *_data) id = find_first_zero_bit(slow_work_ids, SLOW_WORK_THREAD_LIMIT); BUG_ON(id < 0 || id >= SLOW_WORK_THREAD_LIMIT); __set_bit(id, slow_work_ids); + slow_work_set_thread_pid(id, current->pid); spin_unlock_irq(&slow_work_queue_lock); sprintf(current->comm, "kslowd%03u", id); @@ -669,6 +683,7 @@ static int slow_work_thread(void *_data) } spin_lock_irq(&slow_work_queue_lock); + slow_work_set_thread_pid(id, 0); __clear_bit(id, slow_work_ids); spin_unlock_irq(&slow_work_queue_lock); @@ -722,6 +737,9 @@ static void slow_work_new_thread_execute(struct slow_work *work) static const struct slow_work_ops slow_work_new_thread_ops = { .owner = THIS_MODULE, .execute = slow_work_new_thread_execute, +#ifdef CONFIG_SLOW_WORK_PROC + .desc = slow_work_new_thread_desc, +#endif }; /* @@ -948,6 +966,10 @@ static int __init init_slow_work(void) #ifdef CONFIG_SYSCTL if (slow_work_max_max_threads < nr_cpus * 2) slow_work_max_max_threads = nr_cpus * 2; +#endif +#ifdef CONFIG_SLOW_WORK_PROC + proc_create("slow_work_rq", S_IFREG | 0400, NULL, + &slow_work_runqueue_fops); #endif return 0; } diff --git a/kernel/slow-work.h b/kernel/slow-work.h new file mode 100644 index 000000000000..3c2f007f3ad6 --- /dev/null +++ b/kernel/slow-work.h @@ -0,0 +1,72 @@ +/* Slow work private definitions + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#define SLOW_WORK_CULL_TIMEOUT (5 * HZ) /* cull threads 5s after running out of + * things to do */ +#define SLOW_WORK_OOM_TIMEOUT (5 * HZ) /* can't start new threads for 5s after + * OOM */ + +#define SLOW_WORK_THREAD_LIMIT 255 /* abs maximum number of slow-work threads */ + +/* + * slow-work.c + */ +#ifdef CONFIG_SLOW_WORK_PROC +extern struct slow_work *slow_work_execs[]; +extern pid_t slow_work_pids[]; +extern rwlock_t slow_work_execs_lock; +#endif + +extern struct list_head slow_work_queue; +extern struct list_head vslow_work_queue; +extern spinlock_t slow_work_queue_lock; + +/* + * slow-work-proc.c + */ +#ifdef CONFIG_SLOW_WORK_PROC +extern const struct file_operations slow_work_runqueue_fops; + +extern void slow_work_new_thread_desc(struct slow_work *, struct seq_file *); +#endif + +/* + * Helper functions + */ +static inline void slow_work_set_thread_pid(int id, pid_t pid) +{ +#ifdef CONFIG_SLOW_WORK_PROC + slow_work_pids[id] = pid; +#endif +} + +static inline void slow_work_mark_time(struct slow_work *work) +{ +#ifdef CONFIG_SLOW_WORK_PROC + work->mark = CURRENT_TIME; +#endif +} + +static inline void slow_work_begin_exec(int id, struct slow_work *work) +{ +#ifdef CONFIG_SLOW_WORK_PROC + slow_work_execs[id] = work; +#endif +} + +static inline void slow_work_end_exec(int id, struct slow_work *work) +{ +#ifdef CONFIG_SLOW_WORK_PROC + write_lock(&slow_work_execs_lock); + slow_work_execs[id] = NULL; + write_unlock(&slow_work_execs_lock); +#endif +} From 31ba99d304494cb28fa8671ccc769c5543e1165d Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:10:53 +0000 Subject: [PATCH 525/743] SLOW_WORK: Allow the owner of a work item to determine if it is queued or not Add a function (slow_work_is_queued()) to permit the owner of a work item to determine if the item is queued or not. The work item is counted as being queued if it is actually on the queue, not just if it is pending. If it is executing and pending, then it is not on the queue, but will rather be put back on the queue when execution finishes. This permits a caller to quickly work out if it may be able to put another, dependent work item on the queue behind it, or whether it will have to wait till that is finished. This can be used by CacheFiles to work out whether the creation a new object can be immediately deferred when it has to wait for an old object to be deleted, or whether a wait must take place. If a wait is necessary, then the slow-work thread can otherwise get blocked, preventing the deletion from taking place. Signed-off-by: David Howells --- Documentation/slow-work.txt | 15 +++++++++++++++ include/linux/slow-work.h | 19 +++++++++++++++++++ 2 files changed, 34 insertions(+) diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt index f120238e70fe..0169c9d9dd16 100644 --- a/Documentation/slow-work.txt +++ b/Documentation/slow-work.txt @@ -144,6 +144,21 @@ from being taken away before it completes. module should almost certainly be THIS_MODULE. +================ +HELPER FUNCTIONS +================ + +The slow-work facility provides a function by which it can be determined +whether or not an item is queued for later execution: + + bool queued = slow_work_is_queued(struct slow_work *work); + +If it returns false, then the item is not on the queue (it may be executing +with a requeue pending). This can be used to work out whether an item on which +another depends is on the queue, thus allowing a dependent item to be queued +after it. + + =============== ITEM OPERATIONS =============== diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index f41485145ed1..bfd3ab4c8898 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -120,6 +120,25 @@ static inline void vslow_work_init(struct slow_work *work, INIT_LIST_HEAD(&work->link); } +/** + * slow_work_is_queued - Determine if a slow work item is on the work queue + * work: The work item to test + * + * Determine if the specified slow-work item is on the work queue. This + * returns true if it is actually on the queue. + * + * If the item is executing and has been marked for requeue when execution + * finishes, then false will be returned. + * + * Anyone wishing to wait for completion of execution can wait on the + * SLOW_WORK_EXECUTING bit. + */ +static inline bool slow_work_is_queued(struct slow_work *work) +{ + unsigned long flags = work->flags; + return flags & SLOW_WORK_PENDING && !(flags & SLOW_WORK_EXECUTING); +} + extern int slow_work_enqueue(struct slow_work *work); extern void slow_work_cancel(struct slow_work *work); extern int slow_work_register_user(struct module *owner); From 3bde31a4ac225cb5805be02eff6eaaf7e0766ccd Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:10:57 +0000 Subject: [PATCH 526/743] SLOW_WORK: Allow a requeueable work item to sleep till the thread is needed Add a function to allow a requeueable work item to sleep till the thread processing it is needed by the slow-work facility to perform other work. Sometimes a work item can't progress immediately, but must wait for the completion of another work item that's currently being processed by another slow-work thread. In some circumstances, the waiting item could instead - theoretically - put itself back on the queue and yield its thread back to the slow-work facility, thus waiting till it gets processing time again before attempting to progress. This would allow other work items processing time on that thread. However, this only works if there is something on the queue for it to queue behind - otherwise it will just get a thread again immediately, and will end up cycling between the queue and the thread, eating up valuable CPU time. So, slow_work_sleep_till_thread_needed() is provided such that an item can put itself on a wait queue that will wake it up when the event it is actually interested in occurs, then call this function in lieu of calling schedule(). This function will then sleep until either the item's event occurs or another work item appears on the queue. If another work item is queued, but the item's event hasn't occurred, then the work item should requeue itself and yield the thread back to the slow-work facility by returning. This can be used by CacheFiles for an object that is being created on one thread to wait for an object being deleted on another thread where there is nothing on the queue for the creation to go and wait behind. As soon as an item appears on the queue that could be given thread time instead, CacheFiles can stick the creating object back on the queue and return to the slow-work facility - assuming the object deletion didn't also complete. Signed-off-by: David Howells --- Documentation/slow-work.txt | 44 +++++++++++++++++ include/linux/slow-work.h | 3 ++ kernel/slow-work.c | 94 +++++++++++++++++++++++++++++++++---- 3 files changed, 132 insertions(+), 9 deletions(-) diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt index 0169c9d9dd16..52bc31433723 100644 --- a/Documentation/slow-work.txt +++ b/Documentation/slow-work.txt @@ -158,6 +158,50 @@ with a requeue pending). This can be used to work out whether an item on which another depends is on the queue, thus allowing a dependent item to be queued after it. +If the above shows an item on which another depends not to be queued, then the +owner of the dependent item might need to wait. However, to avoid locking up +the threads unnecessarily be sleeping in them, it can make sense under some +circumstances to return the work item to the queue, thus deferring it until +some other items have had a chance to make use of the yielded thread. + +To yield a thread and defer an item, the work function should simply enqueue +the work item again and return. However, this doesn't work if there's nothing +actually on the queue, as the thread just vacated will jump straight back into +the item's work function, thus busy waiting on a CPU. + +Instead, the item should use the thread to wait for the dependency to go away, +but rather than using schedule() or schedule_timeout() to sleep, it should use +the following function: + + bool requeue = slow_work_sleep_till_thread_needed( + struct slow_work *work, + signed long *_timeout); + +This will add a second wait and then sleep, such that it will be woken up if +either something appears on the queue that could usefully make use of the +thread - and behind which this item can be queued, or if the event the caller +set up to wait for happens. True will be returned if something else appeared +on the queue and this work function should perhaps return, of false if +something else woke it up. The timeout is as for schedule_timeout(). + +For example: + + wq = bit_waitqueue(&my_flags, MY_BIT); + init_wait(&wait); + requeue = false; + do { + prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE); + if (!test_bit(MY_BIT, &my_flags)) + break; + requeue = slow_work_sleep_till_thread_needed(&my_work, + &timeout); + } while (timeout > 0 && !requeue); + finish_wait(wq, &wait); + if (!test_bit(MY_BIT, &my_flags) + goto do_my_thing; + if (requeue) + return; // to slow_work + =============== ITEM OPERATIONS diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index bfd3ab4c8898..5035a2691739 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -152,6 +152,9 @@ static inline void delayed_slow_work_cancel(struct delayed_slow_work *dwork) slow_work_cancel(&dwork->work); } +extern bool slow_work_sleep_till_thread_needed(struct slow_work *work, + signed long *_timeout); + #ifdef CONFIG_SYSCTL extern ctl_table slow_work_sysctls[]; #endif diff --git a/kernel/slow-work.c b/kernel/slow-work.c index b763bc2d2670..da94f3c101af 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -132,6 +132,15 @@ LIST_HEAD(slow_work_queue); LIST_HEAD(vslow_work_queue); DEFINE_SPINLOCK(slow_work_queue_lock); +/* + * The following are two wait queues that get pinged when a work item is placed + * on an empty queue. These allow work items that are hogging a thread by + * sleeping in a way that could be deferred to yield their thread and enqueue + * themselves. + */ +static DECLARE_WAIT_QUEUE_HEAD(slow_work_queue_waits_for_occupation); +static DECLARE_WAIT_QUEUE_HEAD(vslow_work_queue_waits_for_occupation); + /* * The thread controls. A variable used to signal to the threads that they * should exit when the queue is empty, a waitqueue used by the threads to wait @@ -305,6 +314,50 @@ auto_requeue: return true; } +/** + * slow_work_sleep_till_thread_needed - Sleep till thread needed by other work + * work: The work item under execution that wants to sleep + * _timeout: Scheduler sleep timeout + * + * Allow a requeueable work item to sleep on a slow-work processor thread until + * that thread is needed to do some other work or the sleep is interrupted by + * some other event. + * + * The caller must set up a wake up event before calling this and must have set + * the appropriate sleep mode (such as TASK_UNINTERRUPTIBLE) and tested its own + * condition before calling this function as no test is made here. + * + * False is returned if there is nothing on the queue; true is returned if the + * work item should be requeued + */ +bool slow_work_sleep_till_thread_needed(struct slow_work *work, + signed long *_timeout) +{ + wait_queue_head_t *wfo_wq; + struct list_head *queue; + + DEFINE_WAIT(wait); + + if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) { + wfo_wq = &vslow_work_queue_waits_for_occupation; + queue = &vslow_work_queue; + } else { + wfo_wq = &slow_work_queue_waits_for_occupation; + queue = &slow_work_queue; + } + + if (!list_empty(queue)) + return true; + + add_wait_queue_exclusive(wfo_wq, &wait); + if (list_empty(queue)) + *_timeout = schedule_timeout(*_timeout); + finish_wait(wfo_wq, &wait); + + return !list_empty(queue); +} +EXPORT_SYMBOL(slow_work_sleep_till_thread_needed); + /** * slow_work_enqueue - Schedule a slow work item for processing * @work: The work item to queue @@ -335,6 +388,8 @@ auto_requeue: */ int slow_work_enqueue(struct slow_work *work) { + wait_queue_head_t *wfo_wq; + struct list_head *queue; unsigned long flags; int ret; @@ -354,6 +409,14 @@ int slow_work_enqueue(struct slow_work *work) * maintaining our promise */ if (!test_and_set_bit_lock(SLOW_WORK_PENDING, &work->flags)) { + if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) { + wfo_wq = &vslow_work_queue_waits_for_occupation; + queue = &vslow_work_queue; + } else { + wfo_wq = &slow_work_queue_waits_for_occupation; + queue = &slow_work_queue; + } + spin_lock_irqsave(&slow_work_queue_lock, flags); if (unlikely(test_bit(SLOW_WORK_CANCELLING, &work->flags))) @@ -380,11 +443,13 @@ int slow_work_enqueue(struct slow_work *work) if (ret < 0) goto failed; slow_work_mark_time(work); - if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) - list_add_tail(&work->link, &vslow_work_queue); - else - list_add_tail(&work->link, &slow_work_queue); + list_add_tail(&work->link, queue); wake_up(&slow_work_thread_wq); + + /* if someone who could be requeued is sleeping on a + * thread, then ask them to yield their thread */ + if (work->link.prev == queue) + wake_up(wfo_wq); } spin_unlock_irqrestore(&slow_work_queue_lock, flags); @@ -487,9 +552,19 @@ EXPORT_SYMBOL(slow_work_cancel); */ static void delayed_slow_work_timer(unsigned long data) { + wait_queue_head_t *wfo_wq; + struct list_head *queue; struct slow_work *work = (struct slow_work *) data; unsigned long flags; - bool queued = false, put = false; + bool queued = false, put = false, first = false; + + if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) { + wfo_wq = &vslow_work_queue_waits_for_occupation; + queue = &vslow_work_queue; + } else { + wfo_wq = &slow_work_queue_waits_for_occupation; + queue = &slow_work_queue; + } spin_lock_irqsave(&slow_work_queue_lock, flags); if (likely(!test_bit(SLOW_WORK_CANCELLING, &work->flags))) { @@ -502,17 +577,18 @@ static void delayed_slow_work_timer(unsigned long data) put = true; } else { slow_work_mark_time(work); - if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) - list_add_tail(&work->link, &vslow_work_queue); - else - list_add_tail(&work->link, &slow_work_queue); + list_add_tail(&work->link, queue); queued = true; + if (work->link.prev == queue) + first = true; } } spin_unlock_irqrestore(&slow_work_queue_lock, flags); if (put) slow_work_put_ref(work); + if (first) + wake_up(wfo_wq); if (queued) wake_up(&slow_work_thread_wq); } From 440f0affe247e9990c8f8778f1861da4fd7d5e50 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:01 +0000 Subject: [PATCH 527/743] FS-Cache: Annotate slow-work runqueue proc lines for FS-Cache work items Annotate slow-work runqueue proc lines for FS-Cache work items. Objects include the object ID and the state. Operations include the object ID, the operation ID and the operation type and state. Signed-off-by: David Howells --- fs/fscache/object.c | 41 ++++++++++++++++++++++++++++++++++- fs/fscache/operation.c | 29 +++++++++++++++++++++++++ fs/fscache/page.c | 27 ++++++++++++++++++----- include/linux/fscache-cache.h | 12 ++++++++++ 4 files changed, 103 insertions(+), 6 deletions(-) diff --git a/fs/fscache/object.c b/fs/fscache/object.c index d236eb1d6f37..615b63dd9ecc 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -14,9 +14,10 @@ #define FSCACHE_DEBUG_LEVEL COOKIE #include +#include #include "internal.h" -const char *fscache_object_states[] = { +const char *fscache_object_states[FSCACHE_OBJECT__NSTATES] = { [FSCACHE_OBJECT_INIT] = "OBJECT_INIT", [FSCACHE_OBJECT_LOOKING_UP] = "OBJECT_LOOKING_UP", [FSCACHE_OBJECT_CREATING] = "OBJECT_CREATING", @@ -33,9 +34,28 @@ const char *fscache_object_states[] = { }; EXPORT_SYMBOL(fscache_object_states); +static const char fscache_object_states_short[FSCACHE_OBJECT__NSTATES][5] = { + [FSCACHE_OBJECT_INIT] = "INIT", + [FSCACHE_OBJECT_LOOKING_UP] = "LOOK", + [FSCACHE_OBJECT_CREATING] = "CRTN", + [FSCACHE_OBJECT_AVAILABLE] = "AVBL", + [FSCACHE_OBJECT_ACTIVE] = "ACTV", + [FSCACHE_OBJECT_UPDATING] = "UPDT", + [FSCACHE_OBJECT_DYING] = "DYNG", + [FSCACHE_OBJECT_LC_DYING] = "LCDY", + [FSCACHE_OBJECT_ABORT_INIT] = "ABTI", + [FSCACHE_OBJECT_RELEASING] = "RELS", + [FSCACHE_OBJECT_RECYCLING] = "RCYC", + [FSCACHE_OBJECT_WITHDRAWING] = "WTHD", + [FSCACHE_OBJECT_DEAD] = "DEAD", +}; + static void fscache_object_slow_work_put_ref(struct slow_work *); static int fscache_object_slow_work_get_ref(struct slow_work *); static void fscache_object_slow_work_execute(struct slow_work *); +#ifdef CONFIG_SLOW_WORK_PROC +static void fscache_object_slow_work_desc(struct slow_work *, struct seq_file *); +#endif static void fscache_initialise_object(struct fscache_object *); static void fscache_lookup_object(struct fscache_object *); static void fscache_object_available(struct fscache_object *); @@ -49,6 +69,9 @@ const struct slow_work_ops fscache_object_slow_work_ops = { .get_ref = fscache_object_slow_work_get_ref, .put_ref = fscache_object_slow_work_put_ref, .execute = fscache_object_slow_work_execute, +#ifdef CONFIG_SLOW_WORK_PROC + .desc = fscache_object_slow_work_desc, +#endif }; EXPORT_SYMBOL(fscache_object_slow_work_ops); @@ -326,6 +349,22 @@ static void fscache_object_slow_work_execute(struct slow_work *work) fscache_enqueue_object(object); } +/* + * describe an object for slow-work debugging + */ +#ifdef CONFIG_SLOW_WORK_PROC +static void fscache_object_slow_work_desc(struct slow_work *work, + struct seq_file *m) +{ + struct fscache_object *object = + container_of(work, struct fscache_object, work); + + seq_printf(m, "FSC: OBJ%x: %s", + object->debug_id, + fscache_object_states_short[object->state]); +} +#endif + /* * initialise an object * - check the specified object's parent to see if we can make use of it diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c index f1a2857b2ff5..91bbe6f0377c 100644 --- a/fs/fscache/operation.c +++ b/fs/fscache/operation.c @@ -13,6 +13,7 @@ #define FSCACHE_DEBUG_LEVEL OPERATION #include +#include #include "internal.h" atomic_t fscache_op_debug_id; @@ -31,6 +32,8 @@ void fscache_enqueue_operation(struct fscache_operation *op) _enter("{OBJ%x OP%x,%u}", op->object->debug_id, op->debug_id, atomic_read(&op->usage)); + fscache_set_op_state(op, "EnQ"); + ASSERT(op->processor != NULL); ASSERTCMP(op->object->state, >=, FSCACHE_OBJECT_AVAILABLE); ASSERTCMP(atomic_read(&op->usage), >, 0); @@ -67,6 +70,8 @@ EXPORT_SYMBOL(fscache_enqueue_operation); static void fscache_run_op(struct fscache_object *object, struct fscache_operation *op) { + fscache_set_op_state(op, "Run"); + object->n_in_progress++; if (test_and_clear_bit(FSCACHE_OP_WAITING, &op->flags)) wake_up_bit(&op->flags, FSCACHE_OP_WAITING); @@ -87,6 +92,8 @@ int fscache_submit_exclusive_op(struct fscache_object *object, _enter("{OBJ%x OP%x},", object->debug_id, op->debug_id); + fscache_set_op_state(op, "SubmitX"); + spin_lock(&object->lock); ASSERTCMP(object->n_ops, >=, object->n_in_progress); ASSERTCMP(object->n_ops, >=, object->n_exclusive); @@ -190,6 +197,8 @@ int fscache_submit_op(struct fscache_object *object, ASSERTCMP(atomic_read(&op->usage), >, 0); + fscache_set_op_state(op, "Submit"); + spin_lock(&object->lock); ASSERTCMP(object->n_ops, >=, object->n_in_progress); ASSERTCMP(object->n_ops, >=, object->n_exclusive); @@ -298,6 +307,8 @@ void fscache_put_operation(struct fscache_operation *op) if (!atomic_dec_and_test(&op->usage)) return; + fscache_set_op_state(op, "Put"); + _debug("PUT OP"); if (test_and_set_bit(FSCACHE_OP_DEAD, &op->flags)) BUG(); @@ -452,9 +463,27 @@ static void fscache_op_execute(struct slow_work *work) _leave(""); } +/* + * describe an operation for slow-work debugging + */ +#ifdef CONFIG_SLOW_WORK_PROC +static void fscache_op_desc(struct slow_work *work, struct seq_file *m) +{ + struct fscache_operation *op = + container_of(work, struct fscache_operation, slow_work); + + seq_printf(m, "FSC: OBJ%x OP%x: %s/%s fl=%lx", + op->object->debug_id, op->debug_id, + op->name, op->state, op->flags); +} +#endif + const struct slow_work_ops fscache_op_slow_work_ops = { .owner = THIS_MODULE, .get_ref = fscache_op_get_ref, .put_ref = fscache_op_put_ref, .execute = fscache_op_execute, +#ifdef CONFIG_SLOW_WORK_PROC + .desc = fscache_op_desc, +#endif }; diff --git a/fs/fscache/page.c b/fs/fscache/page.c index 2568e0eb644f..e8bbc395cef6 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -63,14 +63,19 @@ static void fscache_end_page_write(struct fscache_cookie *cookie, struct page *p static void fscache_attr_changed_op(struct fscache_operation *op) { struct fscache_object *object = op->object; + int ret; _enter("{OBJ%x OP%x}", object->debug_id, op->debug_id); fscache_stat(&fscache_n_attr_changed_calls); - if (fscache_object_is_active(object) && - object->cache->ops->attr_changed(object) < 0) - fscache_abort_object(object); + if (fscache_object_is_active(object)) { + fscache_set_op_state(op, "CallFS"); + ret = object->cache->ops->attr_changed(object); + fscache_set_op_state(op, "Done"); + if (ret < 0) + fscache_abort_object(object); + } _leave(""); } @@ -99,6 +104,7 @@ int __fscache_attr_changed(struct fscache_cookie *cookie) fscache_operation_init(op, NULL); fscache_operation_init_slow(op, fscache_attr_changed_op); op->flags = FSCACHE_OP_SLOW | (1 << FSCACHE_OP_EXCLUSIVE); + fscache_set_op_name(op, "Attr"); spin_lock(&cookie->lock); @@ -184,6 +190,7 @@ static struct fscache_retrieval *fscache_alloc_retrieval( op->start_time = jiffies; INIT_WORK(&op->op.fast_work, fscache_retrieval_work); INIT_LIST_HEAD(&op->to_do); + fscache_set_op_name(&op->op, "Retr"); return op; } @@ -257,6 +264,7 @@ int __fscache_read_or_alloc_page(struct fscache_cookie *cookie, _leave(" = -ENOMEM"); return -ENOMEM; } + fscache_set_op_name(&op->op, "RetrRA1"); spin_lock(&cookie->lock); @@ -369,6 +377,7 @@ int __fscache_read_or_alloc_pages(struct fscache_cookie *cookie, op = fscache_alloc_retrieval(mapping, end_io_func, context); if (!op) return -ENOMEM; + fscache_set_op_name(&op->op, "RetrRAN"); spin_lock(&cookie->lock); @@ -461,6 +470,7 @@ int __fscache_alloc_page(struct fscache_cookie *cookie, op = fscache_alloc_retrieval(page->mapping, NULL, NULL); if (!op) return -ENOMEM; + fscache_set_op_name(&op->op, "RetrAL1"); spin_lock(&cookie->lock); @@ -529,6 +539,8 @@ static void fscache_write_op(struct fscache_operation *_op) _enter("{OP%x,%d}", op->op.debug_id, atomic_read(&op->op.usage)); + fscache_set_op_state(&op->op, "GetPage"); + spin_lock(&cookie->lock); spin_lock(&object->lock); @@ -559,13 +571,17 @@ static void fscache_write_op(struct fscache_operation *_op) spin_unlock(&cookie->lock); if (page) { + fscache_set_op_state(&op->op, "Store"); ret = object->cache->ops->write_page(op, page); + fscache_set_op_state(&op->op, "EndWrite"); fscache_end_page_write(cookie, page); page_cache_release(page); - if (ret < 0) + if (ret < 0) { + fscache_set_op_state(&op->op, "Abort"); fscache_abort_object(object); - else + } else { fscache_enqueue_operation(&op->op); + } } _leave(""); @@ -634,6 +650,7 @@ int __fscache_write_page(struct fscache_cookie *cookie, fscache_operation_init(&op->op, fscache_release_write_op); fscache_operation_init_slow(&op->op, fscache_write_op); op->op.flags = FSCACHE_OP_SLOW | (1 << FSCACHE_OP_WAITING); + fscache_set_op_name(&op->op, "Write1"); ret = radix_tree_preload(gfp & ~__GFP_HIGHMEM); if (ret < 0) diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 84d3532dd3ea..7a9847ccd192 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -102,6 +102,16 @@ struct fscache_operation { /* operation releaser */ fscache_operation_release_t release; + +#ifdef CONFIG_SLOW_WORK_PROC + const char *name; /* operation name */ + const char *state; /* operation state */ +#define fscache_set_op_name(OP, N) do { (OP)->name = (N); } while(0) +#define fscache_set_op_state(OP, S) do { (OP)->state = (S); } while(0) +#else +#define fscache_set_op_name(OP, N) do { } while(0) +#define fscache_set_op_state(OP, S) do { } while(0) +#endif }; extern atomic_t fscache_op_debug_id; @@ -125,6 +135,7 @@ static inline void fscache_operation_init(struct fscache_operation *op, op->debug_id = atomic_inc_return(&fscache_op_debug_id); op->release = release; INIT_LIST_HEAD(&op->pend_link); + fscache_set_op_state(op, "Init"); } /** @@ -337,6 +348,7 @@ struct fscache_object { FSCACHE_OBJECT_RECYCLING, /* retiring object */ FSCACHE_OBJECT_WITHDRAWING, /* withdrawing object */ FSCACHE_OBJECT_DEAD, /* object is now dead */ + FSCACHE_OBJECT__NSTATES } state; int debug_id; /* debugging ID */ From 4fbf4291aa15926cd4fdca0ffe9122e89d0459db Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:04 +0000 Subject: [PATCH 528/743] FS-Cache: Allow the current state of all objects to be dumped Allow the current state of all fscache objects to be dumped by doing: cat /proc/fs/fscache/objects By default, all objects and all fields will be shown. This can be restricted by adding a suitable key to one of the caller's keyrings (such as the session keyring): keyctl add user fscache:objlist "" @s The are: K Show hexdump of object key (don't show if not given) A Show hexdump of object aux data (don't show if not given) And paired restrictions: C Show objects that have a cookie c Show objects that don't have a cookie B Show objects that are busy b Show objects that aren't busy W Show objects that have pending writes w Show objects that don't have pending writes R Show objects that have outstanding reads r Show objects that don't have outstanding reads S Show objects that have slow work queued s Show objects that don't have slow work queued If neither side of a restriction pair is given, then both are implied. For example: keyctl add user fscache:objlist KB @s shows objects that are busy, and lists their object keys, but does not dump their auxiliary data. It also implies "CcWwRrSs", but as 'B' is given, 'b' is not implied. Signed-off-by: David Howells --- Documentation/filesystems/caching/fscache.txt | 81 ++++ fs/cachefiles/interface.c | 1 + fs/cachefiles/rdwr.c | 6 +- fs/fscache/Kconfig | 7 + fs/fscache/Makefile | 1 + fs/fscache/cache.c | 1 + fs/fscache/cookie.c | 2 + fs/fscache/internal.h | 13 + fs/fscache/object-list.c | 432 ++++++++++++++++++ fs/fscache/object.c | 2 +- fs/fscache/operation.c | 3 + fs/fscache/page.c | 6 + fs/fscache/proc.c | 13 + include/linux/fscache-cache.h | 13 + 14 files changed, 578 insertions(+), 3 deletions(-) create mode 100644 fs/fscache/object-list.c diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt index 9e94b9491d89..cac09e11ca30 100644 --- a/Documentation/filesystems/caching/fscache.txt +++ b/Documentation/filesystems/caching/fscache.txt @@ -299,6 +299,87 @@ proc files. jiffy range covered, and the SECS field the equivalent number of seconds. +=========== +OBJECT LIST +=========== + +If CONFIG_FSCACHE_OBJECT_LIST is enabled, the FS-Cache facility will maintain a +list of all the objects currently allocated and allow them to be viewed +through: + + /proc/fs/fscache/objects + +This will look something like: + + [root@andromeda ~]# head /proc/fs/fscache/objects + OBJECT PARENT STAT CHLDN OPS OOP IPR EX READS EM EV F S | NETFS_COOKIE_DEF TY FL NETFS_DATA OBJECT_KEY, AUX_DATA + ======== ======== ==== ===== === === === == ===== == == = = | ================ == == ================ ================ + 17e4b 2 ACTV 0 0 0 0 0 0 7b 4 0 8 | NFS.fh DT 0 ffff88001dd82820 010006017edcf8bbc93b43298fdfbe71e50b57b13a172c0117f38472, e567634700000000000000000000000063f2404a000000000000000000000000c9030000000000000000000063f2404a + 1693a 2 ACTV 0 0 0 0 0 0 7b 4 0 8 | NFS.fh DT 0 ffff88002db23380 010006017edcf8bbc93b43298fdfbe71e50b57b1e0162c01a2df0ea6, 420ebc4a000000000000000000000000420ebc4a0000000000000000000000000e1801000000000000000000420ebc4a + +where the first set of columns before the '|' describe the object: + + COLUMN DESCRIPTION + ======= =============================================================== + OBJECT Object debugging ID (appears as OBJ%x in some debug messages) + PARENT Debugging ID of parent object + STAT Object state + CHLDN Number of child objects of this object + OPS Number of outstanding operations on this object + OOP Number of outstanding child object management operations + IPR + EX Number of outstanding exclusive operations + READS Number of outstanding read operations + EM Object's event mask + EV Events raised on this object + F Object flags + S Object slow-work work item flags + +and the second set of columns describe the object's cookie, if present: + + COLUMN DESCRIPTION + =============== ======================================================= + NETFS_COOKIE_DEF Name of netfs cookie definition + TY Cookie type (IX - index, DT - data, hex - special) + FL Cookie flags + NETFS_DATA Netfs private data stored in the cookie + OBJECT_KEY Object key } 1 column, with separating comma + AUX_DATA Object aux data } presence may be configured + +The data shown may be filtered by attaching the a key to an appropriate keyring +before viewing the file. Something like: + + keyctl add user fscache:objlist @s + +where are a selection of the following letters: + + K Show hexdump of object key (don't show if not given) + A Show hexdump of object aux data (don't show if not given) + +and the following paired letters: + + C Show objects that have a cookie + c Show objects that don't have a cookie + B Show objects that are busy + b Show objects that aren't busy + W Show objects that have pending writes + w Show objects that don't have pending writes + R Show objects that have outstanding reads + r Show objects that don't have outstanding reads + S Show objects that have slow work queued + s Show objects that don't have slow work queued + +If neither side of a letter pair is given, then both are implied. For example: + + keyctl add user fscache:objlist KB @s + +shows objects that are busy, and lists their object keys, but does not dump +their auxiliary data. It also implies "CcWwRrSs", but as 'B' is given, 'b' is +not implied. + +By default all objects and all fields will be shown. + + ========= DEBUGGING ========= diff --git a/fs/cachefiles/interface.c b/fs/cachefiles/interface.c index 431accd475a7..dd7f852746cb 100644 --- a/fs/cachefiles/interface.c +++ b/fs/cachefiles/interface.c @@ -331,6 +331,7 @@ static void cachefiles_put_object(struct fscache_object *_object) } cache = object->fscache.cache; + fscache_object_destroy(&object->fscache); kmem_cache_free(cachefiles_object_jar, object); fscache_object_destroyed(cache); } diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c index a69787e7dd96..3304646dae84 100644 --- a/fs/cachefiles/rdwr.c +++ b/fs/cachefiles/rdwr.c @@ -333,7 +333,8 @@ int cachefiles_read_or_alloc_page(struct fscache_retrieval *op, shift = PAGE_SHIFT - inode->i_sb->s_blocksize_bits; - op->op.flags = FSCACHE_OP_FAST; + op->op.flags &= FSCACHE_OP_KEEP_FLAGS; + op->op.flags |= FSCACHE_OP_FAST; op->op.processor = cachefiles_read_copier; pagevec_init(&pagevec, 0); @@ -639,7 +640,8 @@ int cachefiles_read_or_alloc_pages(struct fscache_retrieval *op, pagevec_init(&pagevec, 0); - op->op.flags = FSCACHE_OP_FAST; + op->op.flags &= FSCACHE_OP_KEEP_FLAGS; + op->op.flags |= FSCACHE_OP_FAST; op->op.processor = cachefiles_read_copier; INIT_LIST_HEAD(&backpages); diff --git a/fs/fscache/Kconfig b/fs/fscache/Kconfig index 9bbb8ce7bea0..864dac20a242 100644 --- a/fs/fscache/Kconfig +++ b/fs/fscache/Kconfig @@ -54,3 +54,10 @@ config FSCACHE_DEBUG enabled by setting bits in /sys/modules/fscache/parameter/debug. See Documentation/filesystems/caching/fscache.txt for more information. + +config FSCACHE_OBJECT_LIST + bool "Maintain global object list for debugging purposes" + depends on FSCACHE && PROC_FS + help + Maintain a global list of active fscache objects that can be + retrieved through /proc/fs/fscache/objects for debugging purposes diff --git a/fs/fscache/Makefile b/fs/fscache/Makefile index 91571b95aacc..6d561531cb36 100644 --- a/fs/fscache/Makefile +++ b/fs/fscache/Makefile @@ -15,5 +15,6 @@ fscache-y := \ fscache-$(CONFIG_PROC_FS) += proc.o fscache-$(CONFIG_FSCACHE_STATS) += stats.o fscache-$(CONFIG_FSCACHE_HISTOGRAM) += histogram.o +fscache-$(CONFIG_FSCACHE_OBJECT_LIST) += object-list.o obj-$(CONFIG_FSCACHE) := fscache.o diff --git a/fs/fscache/cache.c b/fs/fscache/cache.c index e21985bbb1fb..724384ef96de 100644 --- a/fs/fscache/cache.c +++ b/fs/fscache/cache.c @@ -263,6 +263,7 @@ int fscache_add_cache(struct fscache_cache *cache, spin_lock(&cache->object_list_lock); list_add_tail(&ifsdef->cache_link, &cache->object_list); spin_unlock(&cache->object_list_lock); + fscache_objlist_add(ifsdef); /* add the cache's netfs definition index object to the top level index * cookie as a known backing object */ diff --git a/fs/fscache/cookie.c b/fs/fscache/cookie.c index 72fd18f6c71f..9b5187328230 100644 --- a/fs/fscache/cookie.c +++ b/fs/fscache/cookie.c @@ -349,6 +349,8 @@ static int fscache_attach_object(struct fscache_cookie *cookie, object->cookie = cookie; atomic_inc(&cookie->usage); hlist_add_head(&object->cookie_link, &cookie->backing_objects); + + fscache_objlist_add(object); ret = 0; cant_attach_object: diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index 1c341304621f..fe02973a9516 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -88,10 +88,23 @@ extern int fscache_wait_bit_interruptible(void *); /* * object.c */ +extern const char fscache_object_states_short[FSCACHE_OBJECT__NSTATES][5]; + extern void fscache_withdrawing_object(struct fscache_cache *, struct fscache_object *); extern void fscache_enqueue_object(struct fscache_object *); +/* + * object-list.c + */ +#ifdef CONFIG_FSCACHE_OBJECT_LIST +extern const struct file_operations fscache_objlist_fops; + +extern void fscache_objlist_add(struct fscache_object *); +#else +#define fscache_objlist_add(object) do {} while(0) +#endif + /* * operation.c */ diff --git a/fs/fscache/object-list.c b/fs/fscache/object-list.c new file mode 100644 index 000000000000..e590242fa41a --- /dev/null +++ b/fs/fscache/object-list.c @@ -0,0 +1,432 @@ +/* Global fscache object list maintainer and viewer + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#define FSCACHE_DEBUG_LEVEL COOKIE +#include +#include +#include +#include +#include "internal.h" + +static struct rb_root fscache_object_list; +static DEFINE_RWLOCK(fscache_object_list_lock); + +struct fscache_objlist_data { + unsigned long config; /* display configuration */ +#define FSCACHE_OBJLIST_CONFIG_KEY 0x00000001 /* show object keys */ +#define FSCACHE_OBJLIST_CONFIG_AUX 0x00000002 /* show object auxdata */ +#define FSCACHE_OBJLIST_CONFIG_COOKIE 0x00000004 /* show objects with cookies */ +#define FSCACHE_OBJLIST_CONFIG_NOCOOKIE 0x00000008 /* show objects without cookies */ +#define FSCACHE_OBJLIST_CONFIG_BUSY 0x00000010 /* show busy objects */ +#define FSCACHE_OBJLIST_CONFIG_IDLE 0x00000020 /* show idle objects */ +#define FSCACHE_OBJLIST_CONFIG_PENDWR 0x00000040 /* show objects with pending writes */ +#define FSCACHE_OBJLIST_CONFIG_NOPENDWR 0x00000080 /* show objects without pending writes */ +#define FSCACHE_OBJLIST_CONFIG_READS 0x00000100 /* show objects with active reads */ +#define FSCACHE_OBJLIST_CONFIG_NOREADS 0x00000200 /* show objects without active reads */ +#define FSCACHE_OBJLIST_CONFIG_EVENTS 0x00000400 /* show objects with events */ +#define FSCACHE_OBJLIST_CONFIG_NOEVENTS 0x00000800 /* show objects without no events */ +#define FSCACHE_OBJLIST_CONFIG_WORK 0x00001000 /* show objects with slow work */ +#define FSCACHE_OBJLIST_CONFIG_NOWORK 0x00002000 /* show objects without slow work */ + + u8 buf[512]; /* key and aux data buffer */ +}; + +/* + * Add an object to the object list + * - we use the address of the fscache_object structure as the key into the + * tree + */ +void fscache_objlist_add(struct fscache_object *obj) +{ + struct fscache_object *xobj; + struct rb_node **p = &fscache_object_list.rb_node, *parent = NULL; + + write_lock(&fscache_object_list_lock); + + while (*p) { + parent = *p; + xobj = rb_entry(parent, struct fscache_object, objlist_link); + + if (obj < xobj) + p = &(*p)->rb_left; + else if (obj > xobj) + p = &(*p)->rb_right; + else + BUG(); + } + + rb_link_node(&obj->objlist_link, parent, p); + rb_insert_color(&obj->objlist_link, &fscache_object_list); + + write_unlock(&fscache_object_list_lock); +} + +/** + * fscache_object_destroy - Note that a cache object is about to be destroyed + * @object: The object to be destroyed + * + * Note the imminent destruction and deallocation of a cache object record. + */ +void fscache_object_destroy(struct fscache_object *obj) +{ + write_lock(&fscache_object_list_lock); + + BUG_ON(RB_EMPTY_ROOT(&fscache_object_list)); + rb_erase(&obj->objlist_link, &fscache_object_list); + + write_unlock(&fscache_object_list_lock); +} +EXPORT_SYMBOL(fscache_object_destroy); + +/* + * find the object in the tree on or after the specified index + */ +static struct fscache_object *fscache_objlist_lookup(loff_t *_pos) +{ + struct fscache_object *pobj, *obj, *minobj = NULL; + struct rb_node *p; + unsigned long pos; + + if (*_pos >= (unsigned long) ERR_PTR(-ENOENT)) + return NULL; + pos = *_pos; + + /* banners (can't represent line 0 by pos 0 as that would involve + * returning a NULL pointer) */ + if (pos == 0) + return (struct fscache_object *) ++(*_pos); + if (pos < 3) + return (struct fscache_object *)pos; + + pobj = (struct fscache_object *)pos; + p = fscache_object_list.rb_node; + while (p) { + obj = rb_entry(p, struct fscache_object, objlist_link); + if (pobj < obj) { + if (!minobj || minobj > obj) + minobj = obj; + p = p->rb_left; + } else if (pobj > obj) { + p = p->rb_right; + } else { + minobj = obj; + break; + } + obj = NULL; + } + + if (!minobj) + *_pos = (unsigned long) ERR_PTR(-ENOENT); + else if (minobj != obj) + *_pos = (unsigned long) minobj; + return minobj; +} + +/* + * set up the iterator to start reading from the first line + */ +static void *fscache_objlist_start(struct seq_file *m, loff_t *_pos) + __acquires(&fscache_object_list_lock) +{ + read_lock(&fscache_object_list_lock); + return fscache_objlist_lookup(_pos); +} + +/* + * move to the next line + */ +static void *fscache_objlist_next(struct seq_file *m, void *v, loff_t *_pos) +{ + (*_pos)++; + return fscache_objlist_lookup(_pos); +} + +/* + * clean up after reading + */ +static void fscache_objlist_stop(struct seq_file *m, void *v) + __releases(&fscache_object_list_lock) +{ + read_unlock(&fscache_object_list_lock); +} + +/* + * display an object + */ +static int fscache_objlist_show(struct seq_file *m, void *v) +{ + struct fscache_objlist_data *data = m->private; + struct fscache_object *obj = v; + unsigned long config = data->config; + uint16_t keylen, auxlen; + char _type[3], *type; + bool no_cookie; + u8 *buf = data->buf, *p; + + if ((unsigned long) v == 1) { + seq_puts(m, "OBJECT PARENT STAT CHLDN OPS OOP IPR EX READS" + " EM EV F S" + " | NETFS_COOKIE_DEF TY FL NETFS_DATA"); + if (config & (FSCACHE_OBJLIST_CONFIG_KEY | + FSCACHE_OBJLIST_CONFIG_AUX)) + seq_puts(m, " "); + if (config & FSCACHE_OBJLIST_CONFIG_KEY) + seq_puts(m, "OBJECT_KEY"); + if ((config & (FSCACHE_OBJLIST_CONFIG_KEY | + FSCACHE_OBJLIST_CONFIG_AUX)) == + (FSCACHE_OBJLIST_CONFIG_KEY | FSCACHE_OBJLIST_CONFIG_AUX)) + seq_puts(m, ", "); + if (config & FSCACHE_OBJLIST_CONFIG_AUX) + seq_puts(m, "AUX_DATA"); + seq_puts(m, "\n"); + return 0; + } + + if ((unsigned long) v == 2) { + seq_puts(m, "======== ======== ==== ===== === === === == =====" + " == == = =" + " | ================ == == ================"); + if (config & (FSCACHE_OBJLIST_CONFIG_KEY | + FSCACHE_OBJLIST_CONFIG_AUX)) + seq_puts(m, " ================"); + seq_puts(m, "\n"); + return 0; + } + + /* filter out any unwanted objects */ +#define FILTER(criterion, _yes, _no) \ + do { \ + unsigned long yes = FSCACHE_OBJLIST_CONFIG_##_yes; \ + unsigned long no = FSCACHE_OBJLIST_CONFIG_##_no; \ + if (criterion) { \ + if (!(config & yes)) \ + return 0; \ + } else { \ + if (!(config & no)) \ + return 0; \ + } \ + } while(0) + + if (~config) { + FILTER(obj->cookie, + COOKIE, NOCOOKIE); + FILTER(obj->state != FSCACHE_OBJECT_ACTIVE || + obj->n_ops != 0 || + obj->n_obj_ops != 0 || + obj->flags || + !list_empty(&obj->dependents), + BUSY, IDLE); + FILTER(test_bit(FSCACHE_OBJECT_PENDING_WRITE, &obj->flags), + PENDWR, NOPENDWR); + FILTER(atomic_read(&obj->n_reads), + READS, NOREADS); + FILTER(obj->events & obj->event_mask, + EVENTS, NOEVENTS); + FILTER(obj->work.flags & ~(1UL << SLOW_WORK_VERY_SLOW), + WORK, NOWORK); + } + + seq_printf(m, + "%8x %8x %s %5u %3u %3u %3u %2u %5u %2lx %2lx %1lx %1lx | ", + obj->debug_id, + obj->parent ? obj->parent->debug_id : -1, + fscache_object_states_short[obj->state], + obj->n_children, + obj->n_ops, + obj->n_obj_ops, + obj->n_in_progress, + obj->n_exclusive, + atomic_read(&obj->n_reads), + obj->event_mask & FSCACHE_OBJECT_EVENTS_MASK, + obj->events, + obj->flags, + obj->work.flags); + + no_cookie = true; + keylen = auxlen = 0; + if (obj->cookie) { + spin_lock(&obj->lock); + if (obj->cookie) { + switch (obj->cookie->def->type) { + case 0: + type = "IX"; + break; + case 1: + type = "DT"; + break; + default: + sprintf(_type, "%02u", + obj->cookie->def->type); + type = _type; + break; + } + + seq_printf(m, "%-16s %s %2lx %16p", + obj->cookie->def->name, + type, + obj->cookie->flags, + obj->cookie->netfs_data); + + if (obj->cookie->def->get_key && + config & FSCACHE_OBJLIST_CONFIG_KEY) + keylen = obj->cookie->def->get_key( + obj->cookie->netfs_data, + buf, 400); + + if (obj->cookie->def->get_aux && + config & FSCACHE_OBJLIST_CONFIG_AUX) + auxlen = obj->cookie->def->get_aux( + obj->cookie->netfs_data, + buf + keylen, 512 - keylen); + + no_cookie = false; + } + spin_unlock(&obj->lock); + + if (!no_cookie && (keylen > 0 || auxlen > 0)) { + seq_printf(m, " "); + for (p = buf; keylen > 0; keylen--) + seq_printf(m, "%02x", *p++); + if (auxlen > 0) { + if (config & FSCACHE_OBJLIST_CONFIG_KEY) + seq_printf(m, ", "); + for (; auxlen > 0; auxlen--) + seq_printf(m, "%02x", *p++); + } + } + } + + if (no_cookie) + seq_printf(m, "\n"); + else + seq_printf(m, "\n"); + return 0; +} + +static const struct seq_operations fscache_objlist_ops = { + .start = fscache_objlist_start, + .stop = fscache_objlist_stop, + .next = fscache_objlist_next, + .show = fscache_objlist_show, +}; + +/* + * get the configuration for filtering the list + */ +static void fscache_objlist_config(struct fscache_objlist_data *data) +{ +#ifdef CONFIG_KEYS + struct user_key_payload *confkey; + unsigned long config; + struct key *key; + const char *buf; + int len; + + key = request_key(&key_type_user, "fscache:objlist", NULL); + if (IS_ERR(key)) + goto no_config; + + config = 0; + rcu_read_lock(); + + confkey = key->payload.data; + buf = confkey->data; + + for (len = confkey->datalen - 1; len >= 0; len--) { + switch (buf[len]) { + case 'K': config |= FSCACHE_OBJLIST_CONFIG_KEY; break; + case 'A': config |= FSCACHE_OBJLIST_CONFIG_AUX; break; + case 'C': config |= FSCACHE_OBJLIST_CONFIG_COOKIE; break; + case 'c': config |= FSCACHE_OBJLIST_CONFIG_NOCOOKIE; break; + case 'B': config |= FSCACHE_OBJLIST_CONFIG_BUSY; break; + case 'b': config |= FSCACHE_OBJLIST_CONFIG_IDLE; break; + case 'W': config |= FSCACHE_OBJLIST_CONFIG_PENDWR; break; + case 'w': config |= FSCACHE_OBJLIST_CONFIG_NOPENDWR; break; + case 'R': config |= FSCACHE_OBJLIST_CONFIG_READS; break; + case 'r': config |= FSCACHE_OBJLIST_CONFIG_NOREADS; break; + case 'S': config |= FSCACHE_OBJLIST_CONFIG_WORK; break; + case 's': config |= FSCACHE_OBJLIST_CONFIG_NOWORK; break; + } + } + + rcu_read_unlock(); + key_put(key); + + if (!(config & (FSCACHE_OBJLIST_CONFIG_COOKIE | FSCACHE_OBJLIST_CONFIG_NOCOOKIE))) + config |= FSCACHE_OBJLIST_CONFIG_COOKIE | FSCACHE_OBJLIST_CONFIG_NOCOOKIE; + if (!(config & (FSCACHE_OBJLIST_CONFIG_BUSY | FSCACHE_OBJLIST_CONFIG_IDLE))) + config |= FSCACHE_OBJLIST_CONFIG_BUSY | FSCACHE_OBJLIST_CONFIG_IDLE; + if (!(config & (FSCACHE_OBJLIST_CONFIG_PENDWR | FSCACHE_OBJLIST_CONFIG_NOPENDWR))) + config |= FSCACHE_OBJLIST_CONFIG_PENDWR | FSCACHE_OBJLIST_CONFIG_NOPENDWR; + if (!(config & (FSCACHE_OBJLIST_CONFIG_READS | FSCACHE_OBJLIST_CONFIG_NOREADS))) + config |= FSCACHE_OBJLIST_CONFIG_READS | FSCACHE_OBJLIST_CONFIG_NOREADS; + if (!(config & (FSCACHE_OBJLIST_CONFIG_EVENTS | FSCACHE_OBJLIST_CONFIG_NOEVENTS))) + config |= FSCACHE_OBJLIST_CONFIG_EVENTS | FSCACHE_OBJLIST_CONFIG_NOEVENTS; + if (!(config & (FSCACHE_OBJLIST_CONFIG_WORK | FSCACHE_OBJLIST_CONFIG_NOWORK))) + config |= FSCACHE_OBJLIST_CONFIG_WORK | FSCACHE_OBJLIST_CONFIG_NOWORK; + + data->config = config; + return; + +no_config: +#endif + data->config = ULONG_MAX; +} + +/* + * open "/proc/fs/fscache/objects" to provide a list of active objects + * - can be configured by a user-defined key added to the caller's keyrings + */ +static int fscache_objlist_open(struct inode *inode, struct file *file) +{ + struct fscache_objlist_data *data; + struct seq_file *m; + int ret; + + ret = seq_open(file, &fscache_objlist_ops); + if (ret < 0) + return ret; + + m = file->private_data; + + /* buffer for key extraction */ + data = kmalloc(sizeof(struct fscache_objlist_data), GFP_KERNEL); + if (!data) { + seq_release(inode, file); + return -ENOMEM; + } + + /* get the configuration key */ + fscache_objlist_config(data); + + m->private = data; + return 0; +} + +/* + * clean up on close + */ +static int fscache_objlist_release(struct inode *inode, struct file *file) +{ + struct seq_file *m = file->private_data; + + kfree(m->private); + m->private = NULL; + return seq_release(inode, file); +} + +const struct file_operations fscache_objlist_fops = { + .owner = THIS_MODULE, + .open = fscache_objlist_open, + .read = seq_read, + .llseek = seq_lseek, + .release = fscache_objlist_release, +}; diff --git a/fs/fscache/object.c b/fs/fscache/object.c index 615b63dd9ecc..ad1644f073bd 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -34,7 +34,7 @@ const char *fscache_object_states[FSCACHE_OBJECT__NSTATES] = { }; EXPORT_SYMBOL(fscache_object_states); -static const char fscache_object_states_short[FSCACHE_OBJECT__NSTATES][5] = { +const char fscache_object_states_short[FSCACHE_OBJECT__NSTATES][5] = { [FSCACHE_OBJECT_INIT] = "INIT", [FSCACHE_OBJECT_LOOKING_UP] = "LOOK", [FSCACHE_OBJECT_CREATING] = "CRTN", diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c index 91bbe6f0377c..09e43b6e822f 100644 --- a/fs/fscache/operation.c +++ b/fs/fscache/operation.c @@ -322,6 +322,9 @@ void fscache_put_operation(struct fscache_operation *op) object = op->object; + if (test_bit(FSCACHE_OP_DEC_READ_CNT, &op->flags)) + atomic_dec(&object->n_reads); + /* now... we may get called with the object spinlock held, so we * complete the cleanup here only if we can immediately acquire the * lock, and defer it otherwise */ diff --git a/fs/fscache/page.c b/fs/fscache/page.c index e8bbc395cef6..c5973e38ce39 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -275,6 +275,9 @@ int __fscache_read_or_alloc_page(struct fscache_cookie *cookie, ASSERTCMP(object->state, >, FSCACHE_OBJECT_LOOKING_UP); + atomic_inc(&object->n_reads); + set_bit(FSCACHE_OP_DEC_READ_CNT, &op->op.flags); + if (fscache_submit_op(object, &op->op) < 0) goto nobufs_unlock; spin_unlock(&cookie->lock); @@ -386,6 +389,9 @@ int __fscache_read_or_alloc_pages(struct fscache_cookie *cookie, object = hlist_entry(cookie->backing_objects.first, struct fscache_object, cookie_link); + atomic_inc(&object->n_reads); + set_bit(FSCACHE_OP_DEC_READ_CNT, &op->op.flags); + if (fscache_submit_op(object, &op->op) < 0) goto nobufs_unlock; spin_unlock(&cookie->lock); diff --git a/fs/fscache/proc.c b/fs/fscache/proc.c index beeab44bc31a..1d9e4951a597 100644 --- a/fs/fscache/proc.c +++ b/fs/fscache/proc.c @@ -37,10 +37,20 @@ int __init fscache_proc_init(void) goto error_histogram; #endif +#ifdef CONFIG_FSCACHE_OBJECT_LIST + if (!proc_create("fs/fscache/objects", S_IFREG | 0444, NULL, + &fscache_objlist_fops)) + goto error_objects; +#endif + _leave(" = 0"); return 0; +#ifdef CONFIG_FSCACHE_OBJECT_LIST +error_objects: +#endif #ifdef CONFIG_FSCACHE_HISTOGRAM + remove_proc_entry("fs/fscache/histogram", NULL); error_histogram: #endif #ifdef CONFIG_FSCACHE_STATS @@ -58,6 +68,9 @@ error_dir: */ void fscache_proc_cleanup(void) { +#ifdef CONFIG_FSCACHE_OBJECT_LIST + remove_proc_entry("fs/fscache/objects", NULL); +#endif #ifdef CONFIG_FSCACHE_HISTOGRAM remove_proc_entry("fs/fscache/histogram", NULL); #endif diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 7a9847ccd192..184cbdfbcc99 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -91,6 +91,8 @@ struct fscache_operation { #define FSCACHE_OP_WAITING 4 /* cleared when op is woken */ #define FSCACHE_OP_EXCLUSIVE 5 /* exclusive op, other ops must wait */ #define FSCACHE_OP_DEAD 6 /* op is now dead */ +#define FSCACHE_OP_DEC_READ_CNT 7 /* decrement object->n_reads on destruction */ +#define FSCACHE_OP_KEEP_FLAGS 0xc0 /* flags to keep when repurposing an op */ atomic_t usage; unsigned debug_id; /* debugging ID */ @@ -357,6 +359,7 @@ struct fscache_object { int n_obj_ops; /* number of object ops outstanding on object */ int n_in_progress; /* number of ops in progress */ int n_exclusive; /* number of exclusive ops queued */ + atomic_t n_reads; /* number of read ops in progress */ spinlock_t lock; /* state and operations lock */ unsigned long lookup_jif; /* time at which lookup started */ @@ -370,6 +373,7 @@ struct fscache_object { #define FSCACHE_OBJECT_EV_RELEASE 4 /* T if netfs requested object release */ #define FSCACHE_OBJECT_EV_RETIRE 5 /* T if netfs requested object retirement */ #define FSCACHE_OBJECT_EV_WITHDRAW 6 /* T if cache requested object withdrawal */ +#define FSCACHE_OBJECT_EVENTS_MASK 0x7f /* mask of all events*/ unsigned long flags; #define FSCACHE_OBJECT_LOCK 0 /* T if object is busy being processed */ @@ -385,6 +389,9 @@ struct fscache_object { struct list_head dependents; /* FIFO of dependent objects */ struct list_head dep_link; /* link in parent's dependents list */ struct list_head pending_ops; /* unstarted operations on this object */ +#ifdef CONFIG_FSCACHE_OBJECT_LIST + struct rb_node objlist_link; /* link in global object list */ +#endif pgoff_t store_limit; /* current storage limit */ }; @@ -434,6 +441,12 @@ void fscache_object_init(struct fscache_object *object, extern void fscache_object_lookup_negative(struct fscache_object *object); extern void fscache_obtained_object(struct fscache_object *object); +#ifdef CONFIG_FSCACHE_OBJECT_LIST +extern void fscache_object_destroy(struct fscache_object *object); +#else +#define fscache_object_destroy(object) do {} while(0) +#endif + /** * fscache_object_destroyed - Note destruction of an object in a cache * @cache: The cache from which the object came From 52bd75fdb135d6133d878ae60c6e7e3f4ebc1cfc Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:08 +0000 Subject: [PATCH 529/743] FS-Cache: Add counters for entry/exit to/from cache operation functions Count entries to and exits from cache operation table functions. Maintain these as a single counter that's added to or removed from as appropriate. Signed-off-by: David Howells --- Documentation/filesystems/caching/fscache.txt | 16 ++++++++ fs/fscache/cache.c | 4 ++ fs/fscache/cookie.c | 9 ++++- fs/fscache/internal.h | 22 +++++++++++ fs/fscache/object.c | 26 ++++++++++++- fs/fscache/page.c | 29 ++++++++++++--- fs/fscache/stats.c | 37 +++++++++++++++++++ 7 files changed, 134 insertions(+), 9 deletions(-) diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt index cac09e11ca30..b6c32c080ab1 100644 --- a/Documentation/filesystems/caching/fscache.txt +++ b/Documentation/filesystems/caching/fscache.txt @@ -274,6 +274,22 @@ proc files. dfr=N Number of async ops queued for deferred release rel=N Number of async ops released gc=N Number of deferred-release async ops garbage collected + CacheOp alo=N Number of in-progress alloc_object() cache ops + luo=N Number of in-progress lookup_object() cache ops + luc=N Number of in-progress lookup_complete() cache ops + gro=N Number of in-progress grab_object() cache ops + upo=N Number of in-progress update_object() cache ops + dro=N Number of in-progress drop_object() cache ops + pto=N Number of in-progress put_object() cache ops + syn=N Number of in-progress sync_cache() cache ops + atc=N Number of in-progress attr_changed() cache ops + rap=N Number of in-progress read_or_alloc_page() cache ops + ras=N Number of in-progress read_or_alloc_pages() cache ops + alp=N Number of in-progress allocate_page() cache ops + als=N Number of in-progress allocate_pages() cache ops + wrp=N Number of in-progress write_page() cache ops + ucp=N Number of in-progress uncache_page() cache ops + dsp=N Number of in-progress dissociate_pages() cache ops (*) /proc/fs/fscache/histogram diff --git a/fs/fscache/cache.c b/fs/fscache/cache.c index 724384ef96de..6a3c48abd677 100644 --- a/fs/fscache/cache.c +++ b/fs/fscache/cache.c @@ -381,11 +381,15 @@ void fscache_withdraw_cache(struct fscache_cache *cache) /* make sure all pages pinned by operations on behalf of the netfs are * written to disk */ + fscache_stat(&fscache_n_cop_sync_cache); cache->ops->sync_cache(cache); + fscache_stat_d(&fscache_n_cop_sync_cache); /* dissociate all the netfs pages backed by this cache from the block * mappings in the cache */ + fscache_stat(&fscache_n_cop_dissociate_pages); cache->ops->dissociate_pages(cache); + fscache_stat_d(&fscache_n_cop_dissociate_pages); /* we now have to destroy all the active objects pertaining to this * cache - which we do by passing them off to thread pool to be diff --git a/fs/fscache/cookie.c b/fs/fscache/cookie.c index 9b5187328230..432482edc738 100644 --- a/fs/fscache/cookie.c +++ b/fs/fscache/cookie.c @@ -249,7 +249,9 @@ static int fscache_alloc_object(struct fscache_cache *cache, /* ask the cache to allocate an object (we may end up with duplicate * objects at this stage, but we sort that out later) */ + fscache_stat(&fscache_n_cop_alloc_object); object = cache->ops->alloc_object(cache, cookie); + fscache_stat_d(&fscache_n_cop_alloc_object); if (IS_ERR(object)) { fscache_stat(&fscache_n_object_no_alloc); ret = PTR_ERR(object); @@ -270,8 +272,11 @@ static int fscache_alloc_object(struct fscache_cache *cache, /* only attach if we managed to allocate all we needed, otherwise * discard the object we just allocated and instead use the one * attached to the cookie */ - if (fscache_attach_object(cookie, object) < 0) + if (fscache_attach_object(cookie, object) < 0) { + fscache_stat(&fscache_n_cop_put_object); cache->ops->put_object(object); + fscache_stat_d(&fscache_n_cop_put_object); + } _leave(" = 0"); return 0; @@ -287,7 +292,9 @@ object_already_extant: return 0; error_put: + fscache_stat(&fscache_n_cop_put_object); cache->ops->put_object(object); + fscache_stat_d(&fscache_n_cop_put_object); error: _leave(" = %d", ret); return ret; diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index fe02973a9516..b85cc8906818 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -208,11 +208,33 @@ extern atomic_t fscache_n_checkaux_okay; extern atomic_t fscache_n_checkaux_update; extern atomic_t fscache_n_checkaux_obsolete; +extern atomic_t fscache_n_cop_alloc_object; +extern atomic_t fscache_n_cop_lookup_object; +extern atomic_t fscache_n_cop_lookup_complete; +extern atomic_t fscache_n_cop_grab_object; +extern atomic_t fscache_n_cop_update_object; +extern atomic_t fscache_n_cop_drop_object; +extern atomic_t fscache_n_cop_put_object; +extern atomic_t fscache_n_cop_sync_cache; +extern atomic_t fscache_n_cop_attr_changed; +extern atomic_t fscache_n_cop_read_or_alloc_page; +extern atomic_t fscache_n_cop_read_or_alloc_pages; +extern atomic_t fscache_n_cop_allocate_page; +extern atomic_t fscache_n_cop_allocate_pages; +extern atomic_t fscache_n_cop_write_page; +extern atomic_t fscache_n_cop_uncache_page; +extern atomic_t fscache_n_cop_dissociate_pages; + static inline void fscache_stat(atomic_t *stat) { atomic_inc(stat); } +static inline void fscache_stat_d(atomic_t *stat) +{ + atomic_dec(stat); +} + extern const struct file_operations fscache_stats_fops; #else diff --git a/fs/fscache/object.c b/fs/fscache/object.c index ad1644f073bd..0d65c0c92b46 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -144,13 +144,17 @@ static void fscache_object_state_machine(struct fscache_object *object) case FSCACHE_OBJECT_UPDATING: clear_bit(FSCACHE_OBJECT_EV_UPDATE, &object->events); fscache_stat(&fscache_n_updates_run); + fscache_stat(&fscache_n_cop_update_object); object->cache->ops->update_object(object); + fscache_stat_d(&fscache_n_cop_update_object); goto active_transit; /* handle an object dying during lookup or creation */ case FSCACHE_OBJECT_LC_DYING: object->event_mask &= ~(1 << FSCACHE_OBJECT_EV_UPDATE); + fscache_stat(&fscache_n_cop_lookup_complete); object->cache->ops->lookup_complete(object); + fscache_stat_d(&fscache_n_cop_lookup_complete); spin_lock(&object->lock); object->state = FSCACHE_OBJECT_DYING; @@ -416,7 +420,9 @@ static void fscache_initialise_object(struct fscache_object *object) * binding on to us, so we need to make sure we don't * add ourself to the list multiple times */ if (list_empty(&object->dep_link)) { + fscache_stat(&fscache_n_cop_grab_object); object->cache->ops->grab_object(object); + fscache_stat_d(&fscache_n_cop_grab_object); list_add(&object->dep_link, &parent->dependents); @@ -478,7 +484,9 @@ static void fscache_lookup_object(struct fscache_object *object) object->cache->tag->name); fscache_stat(&fscache_n_object_lookups); + fscache_stat(&fscache_n_cop_lookup_object); object->cache->ops->lookup_object(object); + fscache_stat_d(&fscache_n_cop_lookup_object); if (test_bit(FSCACHE_OBJECT_EV_ERROR, &object->events)) set_bit(FSCACHE_COOKIE_UNAVAILABLE, &cookie->flags); @@ -602,7 +610,9 @@ static void fscache_object_available(struct fscache_object *object) } spin_unlock(&object->lock); + fscache_stat(&fscache_n_cop_lookup_complete); object->cache->ops->lookup_complete(object); + fscache_stat_d(&fscache_n_cop_lookup_complete); fscache_enqueue_dependents(object); fscache_hist(fscache_obj_instantiate_histogram, object->lookup_jif); @@ -625,7 +635,9 @@ static void fscache_drop_object(struct fscache_object *object) list_del_init(&object->cache_link); spin_unlock(&cache->object_list_lock); + fscache_stat(&fscache_n_cop_drop_object); cache->ops->drop_object(object); + fscache_stat_d(&fscache_n_cop_drop_object); if (parent) { _debug("release parent OBJ%x {%d}", @@ -640,7 +652,9 @@ static void fscache_drop_object(struct fscache_object *object) } /* this just shifts the object release to the slow work processor */ + fscache_stat(&fscache_n_cop_put_object); object->cache->ops->put_object(object); + fscache_stat_d(&fscache_n_cop_put_object); _leave(""); } @@ -730,8 +744,12 @@ static int fscache_object_slow_work_get_ref(struct slow_work *work) { struct fscache_object *object = container_of(work, struct fscache_object, work); + int ret; - return object->cache->ops->grab_object(object) ? 0 : -EAGAIN; + fscache_stat(&fscache_n_cop_grab_object); + ret = object->cache->ops->grab_object(object) ? 0 : -EAGAIN; + fscache_stat_d(&fscache_n_cop_grab_object); + return ret; } /* @@ -742,7 +760,9 @@ static void fscache_object_slow_work_put_ref(struct slow_work *work) struct fscache_object *object = container_of(work, struct fscache_object, work); - return object->cache->ops->put_object(object); + fscache_stat(&fscache_n_cop_put_object); + object->cache->ops->put_object(object); + fscache_stat_d(&fscache_n_cop_put_object); } /* @@ -779,7 +799,9 @@ static void fscache_enqueue_dependents(struct fscache_object *object) /* sort onto appropriate lists */ fscache_enqueue_object(dep); + fscache_stat(&fscache_n_cop_put_object); dep->cache->ops->put_object(dep); + fscache_stat_d(&fscache_n_cop_put_object); if (!list_empty(&object->dependents)) cond_resched_lock(&object->lock); diff --git a/fs/fscache/page.c b/fs/fscache/page.c index c5973e38ce39..250dfd34c07b 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -71,7 +71,9 @@ static void fscache_attr_changed_op(struct fscache_operation *op) if (fscache_object_is_active(object)) { fscache_set_op_state(op, "CallFS"); + fscache_stat(&fscache_n_cop_attr_changed); ret = object->cache->ops->attr_changed(object); + fscache_stat_d(&fscache_n_cop_attr_changed); fscache_set_op_state(op, "Done"); if (ret < 0) fscache_abort_object(object); @@ -300,11 +302,15 @@ int __fscache_read_or_alloc_page(struct fscache_cookie *cookie, /* ask the cache to honour the operation */ if (test_bit(FSCACHE_COOKIE_NO_DATA_YET, &object->cookie->flags)) { + fscache_stat(&fscache_n_cop_allocate_page); ret = object->cache->ops->allocate_page(op, page, gfp); + fscache_stat_d(&fscache_n_cop_allocate_page); if (ret == 0) ret = -ENODATA; } else { + fscache_stat(&fscache_n_cop_read_or_alloc_page); ret = object->cache->ops->read_or_alloc_page(op, page, gfp); + fscache_stat_d(&fscache_n_cop_read_or_alloc_page); } if (ret == -ENOMEM) @@ -358,7 +364,6 @@ int __fscache_read_or_alloc_pages(struct fscache_cookie *cookie, void *context, gfp_t gfp) { - fscache_pages_retrieval_func_t func; struct fscache_retrieval *op; struct fscache_object *object; int ret; @@ -413,11 +418,17 @@ int __fscache_read_or_alloc_pages(struct fscache_cookie *cookie, } /* ask the cache to honour the operation */ - if (test_bit(FSCACHE_COOKIE_NO_DATA_YET, &object->cookie->flags)) - func = object->cache->ops->allocate_pages; - else - func = object->cache->ops->read_or_alloc_pages; - ret = func(op, pages, nr_pages, gfp); + if (test_bit(FSCACHE_COOKIE_NO_DATA_YET, &object->cookie->flags)) { + fscache_stat(&fscache_n_cop_allocate_pages); + ret = object->cache->ops->allocate_pages( + op, pages, nr_pages, gfp); + fscache_stat_d(&fscache_n_cop_allocate_pages); + } else { + fscache_stat(&fscache_n_cop_read_or_alloc_pages); + ret = object->cache->ops->read_or_alloc_pages( + op, pages, nr_pages, gfp); + fscache_stat_d(&fscache_n_cop_read_or_alloc_pages); + } if (ret == -ENOMEM) fscache_stat(&fscache_n_retrievals_nomem); @@ -500,7 +511,9 @@ int __fscache_alloc_page(struct fscache_cookie *cookie, } /* ask the cache to honour the operation */ + fscache_stat(&fscache_n_cop_allocate_page); ret = object->cache->ops->allocate_page(op, page, gfp); + fscache_stat_d(&fscache_n_cop_allocate_page); if (ret < 0) fscache_stat(&fscache_n_allocs_nobufs); @@ -578,7 +591,9 @@ static void fscache_write_op(struct fscache_operation *_op) if (page) { fscache_set_op_state(&op->op, "Store"); + fscache_stat(&fscache_n_cop_write_page); ret = object->cache->ops->write_page(op, page); + fscache_stat_d(&fscache_n_cop_write_page); fscache_set_op_state(&op->op, "EndWrite"); fscache_end_page_write(cookie, page); page_cache_release(page); @@ -786,7 +801,9 @@ void __fscache_uncache_page(struct fscache_cookie *cookie, struct page *page) if (TestClearPageFsCache(page) && object->cache->ops->uncache_page) { /* the cache backend releases the cookie lock */ + fscache_stat(&fscache_n_cop_uncache_page); object->cache->ops->uncache_page(object, page); + fscache_stat_d(&fscache_n_cop_uncache_page); goto done; } diff --git a/fs/fscache/stats.c b/fs/fscache/stats.c index 65deb99e756b..20233fb44bfd 100644 --- a/fs/fscache/stats.c +++ b/fs/fscache/stats.c @@ -93,6 +93,23 @@ atomic_t fscache_n_checkaux_okay; atomic_t fscache_n_checkaux_update; atomic_t fscache_n_checkaux_obsolete; +atomic_t fscache_n_cop_alloc_object; +atomic_t fscache_n_cop_lookup_object; +atomic_t fscache_n_cop_lookup_complete; +atomic_t fscache_n_cop_grab_object; +atomic_t fscache_n_cop_update_object; +atomic_t fscache_n_cop_drop_object; +atomic_t fscache_n_cop_put_object; +atomic_t fscache_n_cop_sync_cache; +atomic_t fscache_n_cop_attr_changed; +atomic_t fscache_n_cop_read_or_alloc_page; +atomic_t fscache_n_cop_read_or_alloc_pages; +atomic_t fscache_n_cop_allocate_page; +atomic_t fscache_n_cop_allocate_pages; +atomic_t fscache_n_cop_write_page; +atomic_t fscache_n_cop_uncache_page; +atomic_t fscache_n_cop_dissociate_pages; + /* * display the general statistics */ @@ -192,6 +209,26 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_op_deferred_release), atomic_read(&fscache_n_op_release), atomic_read(&fscache_n_op_gc)); + + seq_printf(m, "CacheOp: alo=%d luo=%d luc=%d gro=%d\n", + atomic_read(&fscache_n_cop_alloc_object), + atomic_read(&fscache_n_cop_lookup_object), + atomic_read(&fscache_n_cop_lookup_complete), + atomic_read(&fscache_n_cop_grab_object)); + seq_printf(m, "CacheOp: upo=%d dro=%d pto=%d atc=%d syn=%d\n", + atomic_read(&fscache_n_cop_update_object), + atomic_read(&fscache_n_cop_drop_object), + atomic_read(&fscache_n_cop_put_object), + atomic_read(&fscache_n_cop_attr_changed), + atomic_read(&fscache_n_cop_sync_cache)); + seq_printf(m, "CacheOp: rap=%d ras=%d alp=%d als=%d wrp=%d ucp=%d dsp=%d\n", + atomic_read(&fscache_n_cop_read_or_alloc_page), + atomic_read(&fscache_n_cop_read_or_alloc_pages), + atomic_read(&fscache_n_cop_allocate_page), + atomic_read(&fscache_n_cop_allocate_pages), + atomic_read(&fscache_n_cop_write_page), + atomic_read(&fscache_n_cop_uncache_page), + atomic_read(&fscache_n_cop_dissociate_pages)); return 0; } From 7e311a207d596b9273d811149d6e3e14f05ac4c0 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:11 +0000 Subject: [PATCH 530/743] FS-Cache: Clear netfs pointers in cookie after detaching object, not before Clear the pointers from the fscache_cookie struct to netfs private data after clearing the pointer to the cookie from the fscache_object struct and releasing the object lock, rather than before. This allows the netfs private data pointers to be relied on simply by holding the object lock, rather than having to hold the cookie lock. This is makes things simpler as the cookie lock has to be taken before the object lock, but sometimes the object pointer is all that the code has. Signed-off-by: David Howells --- fs/fscache/cookie.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/fscache/cookie.c b/fs/fscache/cookie.c index 432482edc738..b1870a6c2cd3 100644 --- a/fs/fscache/cookie.c +++ b/fs/fscache/cookie.c @@ -437,12 +437,8 @@ void __fscache_relinquish_cookie(struct fscache_cookie *cookie, int retire) event = retire ? FSCACHE_OBJECT_EV_RETIRE : FSCACHE_OBJECT_EV_RELEASE; - /* detach pointers back to the netfs */ spin_lock(&cookie->lock); - cookie->netfs_data = NULL; - cookie->def = NULL; - /* break links with all the active objects */ while (!hlist_empty(&cookie->backing_objects)) { object = hlist_entry(cookie->backing_objects.first, @@ -465,6 +461,10 @@ void __fscache_relinquish_cookie(struct fscache_cookie *cookie, int retire) BUG(); } + /* detach pointers back to the netfs */ + cookie->netfs_data = NULL; + cookie->def = NULL; + spin_unlock(&cookie->lock); if (cookie->parent) { From b34df792b4e9e311db47fad27949095d0629c197 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:14 +0000 Subject: [PATCH 531/743] FS-Cache: Use radix tree preload correctly in tracking of pages to be stored __fscache_write_page() attempts to load the radix tree preallocation pool for the CPU it is on before calling radix_tree_insert(), as the insertion must be done inside a pair of spinlocks. Use of the preallocation pool, however, is contingent on the radix tree being initialised without __GFP_WAIT specified. __fscache_acquire_cookie() was passing GFP_NOFS to INIT_RADIX_TREE() - but that includes __GFP_WAIT. The solution is to AND out __GFP_WAIT. Additionally, the banner comment to radix_tree_preload() is altered to make note of this prerequisite. Possibly there should be a WARN_ON() too. Without this fix, I have seen the following recursive deadlock caused by radix_tree_insert() attempting to allocate memory inside the spinlocked region, which resulted in FS-Cache being called back into to release memory - which required the spinlock already held. ============================================= [ INFO: possible recursive locking detected ] 2.6.32-rc6-cachefs #24 --------------------------------------------- nfsiod/7916 is trying to acquire lock: (&cookie->lock){+.+.-.}, at: [] __fscache_uncache_page+0xdb/0x160 [fscache] but task is already holding lock: (&cookie->lock){+.+.-.}, at: [] __fscache_write_page+0x15c/0x3f3 [fscache] other info that might help us debug this: 5 locks held by nfsiod/7916: #0: (nfsiod){+.+.+.}, at: [] worker_thread+0x19a/0x2e2 #1: (&task->u.tk_work#2){+.+.+.}, at: [] worker_thread+0x19a/0x2e2 #2: (&cookie->lock){+.+.-.}, at: [] __fscache_write_page+0x15c/0x3f3 [fscache] #3: (&object->lock#2){+.+.-.}, at: [] __fscache_write_page+0x197/0x3f3 [fscache] #4: (&cookie->stores_lock){+.+...}, at: [] __fscache_write_page+0x19f/0x3f3 [fscache] stack backtrace: Pid: 7916, comm: nfsiod Not tainted 2.6.32-rc6-cachefs #24 Call Trace: [] __lock_acquire+0x1649/0x16e3 [] ? __lock_acquire+0x7b7/0x16e3 [] ? dump_trace+0x248/0x257 [] lock_acquire+0x57/0x6d [] ? __fscache_uncache_page+0xdb/0x160 [fscache] [] _spin_lock+0x2c/0x3b [] ? __fscache_uncache_page+0xdb/0x160 [fscache] [] __fscache_uncache_page+0xdb/0x160 [fscache] [] ? __fscache_check_page_write+0x0/0x71 [fscache] [] nfs_fscache_release_page+0x86/0xc4 [nfs] [] nfs_release_page+0x3c/0x41 [nfs] [] try_to_release_page+0x32/0x3b [] shrink_page_list+0x316/0x4ac [] ? mark_held_locks+0x52/0x70 [] ? _spin_unlock_irq+0x2b/0x31 [] shrink_inactive_list+0x392/0x67c [] ? mark_held_locks+0x52/0x70 [] shrink_list+0x8d/0x8f [] shrink_zone+0x278/0x33c [] ? ktime_get_ts+0xad/0xba [] try_to_free_pages+0x22e/0x392 [] ? isolate_pages_global+0x0/0x212 [] __alloc_pages_nodemask+0x3dc/0x5cf [] cache_alloc_refill+0x34d/0x6c1 [] ? radix_tree_node_alloc+0x52/0x5c [] kmem_cache_alloc+0xb2/0x118 [] radix_tree_node_alloc+0x52/0x5c [] radix_tree_insert+0x57/0x19c [] __fscache_write_page+0x1e3/0x3f3 [fscache] [] __nfs_readpage_to_fscache+0x58/0x11e [nfs] [] nfs_readpage_release+0x34/0x9b [nfs] [] nfs_readpage_release_full+0x32/0x4b [nfs] [] rpc_release_calldata+0x12/0x14 [sunrpc] [] rpc_free_task+0x59/0x61 [sunrpc] [] rpc_async_release+0x10/0x12 [sunrpc] [] worker_thread+0x1ef/0x2e2 [] ? worker_thread+0x19a/0x2e2 [] ? thread_return+0x3e/0x101 [] ? rpc_async_release+0x0/0x12 [sunrpc] [] ? autoremove_wake_function+0x0/0x34 [] ? trace_hardirqs_on+0xd/0xf [] ? worker_thread+0x0/0x2e2 [] kthread+0x7a/0x82 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? add_wait_queue+0x15/0x44 [] ? kthread+0x0/0x82 [] ? child_rip+0x0/0x20 Signed-off-by: David Howells --- fs/fscache/cookie.c | 4 +++- lib/radix-tree.c | 3 +++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/fscache/cookie.c b/fs/fscache/cookie.c index b1870a6c2cd3..e6854f5222f5 100644 --- a/fs/fscache/cookie.c +++ b/fs/fscache/cookie.c @@ -102,7 +102,9 @@ struct fscache_cookie *__fscache_acquire_cookie( cookie->netfs_data = netfs_data; cookie->flags = 0; - INIT_RADIX_TREE(&cookie->stores, GFP_NOFS); + /* radix tree insertion won't use the preallocation pool unless it's + * told it may not wait */ + INIT_RADIX_TREE(&cookie->stores, GFP_NOFS & ~__GFP_WAIT); switch (cookie->def->type) { case FSCACHE_COOKIE_TYPE_INDEX: diff --git a/lib/radix-tree.c b/lib/radix-tree.c index 23abbd93cae1..ae6106855561 100644 --- a/lib/radix-tree.c +++ b/lib/radix-tree.c @@ -200,6 +200,9 @@ radix_tree_node_free(struct radix_tree_node *node) * ensure that the addition of a single element in the tree cannot fail. On * success, return zero, with preemption disabled. On error, return -ENOMEM * with preemption not disabled. + * + * To make use of this facility, the radix tree must be initialised without + * __GFP_WAIT being passed to INIT_RADIX_TREE(). */ int radix_tree_preload(gfp_t gfp_mask) { From 5753c441889253e4323eee85f791a1d64cf08196 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:19 +0000 Subject: [PATCH 532/743] FS-Cache: Permit cache retrieval ops to be interrupted in the initial wait phase Permit the operations to retrieve data from the cache or to allocate space in the cache for future writes to be interrupted whilst they're waiting for permission for the operation to proceed. Typically this wait occurs whilst the cache object is being looked up on disk in the background. If an interruption occurs, and the operation has not yet been given the go-ahead to run, the operation is dequeued and cancelled, and control returns to the read operation of the netfs routine with none of the requested pages having been read or in any way marked as known by the cache. This means that the initial wait is done interruptibly rather than uninterruptibly. In addition, extra stats values are made available to show the number of ops cancelled and the number of cache space allocations interrupted. Signed-off-by: David Howells --- Documentation/filesystems/caching/fscache.txt | 2 + fs/fscache/internal.h | 3 + fs/fscache/operation.c | 82 ++++++++++++------- fs/fscache/page.c | 55 +++++++++++-- fs/fscache/stats.c | 12 ++- 5 files changed, 115 insertions(+), 39 deletions(-) diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt index b6c32c080ab1..0a77868f4977 100644 --- a/Documentation/filesystems/caching/fscache.txt +++ b/Documentation/filesystems/caching/fscache.txt @@ -250,6 +250,7 @@ proc files. ok=N Number of successful alloc reqs wt=N Number of alloc reqs that waited on lookup completion nbf=N Number of alloc reqs rejected -ENOBUFS + int=N Number of alloc reqs aborted -ERESTARTSYS ops=N Number of alloc reqs submitted owt=N Number of alloc reqs waited for CPU time Retrvls n=N Number of retrieval (read) requests seen @@ -271,6 +272,7 @@ proc files. Ops pend=N Number of times async ops added to pending queues run=N Number of times async ops given CPU time enq=N Number of times async ops queued for processing + can=N Number of async ops cancelled dfr=N Number of async ops queued for deferred release rel=N Number of async ops released gc=N Number of deferred-release async ops garbage collected diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index b85cc8906818..50324ad2b194 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -112,6 +112,7 @@ extern int fscache_submit_exclusive_op(struct fscache_object *, struct fscache_operation *); extern int fscache_submit_op(struct fscache_object *, struct fscache_operation *); +extern int fscache_cancel_op(struct fscache_operation *); extern void fscache_abort_object(struct fscache_object *); extern void fscache_start_operations(struct fscache_object *); extern void fscache_operation_gc(struct work_struct *); @@ -140,6 +141,7 @@ extern atomic_t fscache_n_op_enqueue; extern atomic_t fscache_n_op_deferred_release; extern atomic_t fscache_n_op_release; extern atomic_t fscache_n_op_gc; +extern atomic_t fscache_n_op_cancelled; extern atomic_t fscache_n_attr_changed; extern atomic_t fscache_n_attr_changed_ok; @@ -151,6 +153,7 @@ extern atomic_t fscache_n_allocs; extern atomic_t fscache_n_allocs_ok; extern atomic_t fscache_n_allocs_wait; extern atomic_t fscache_n_allocs_nobufs; +extern atomic_t fscache_n_allocs_intr; extern atomic_t fscache_n_alloc_ops; extern atomic_t fscache_n_alloc_op_waits; diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c index 09e43b6e822f..296492efb81b 100644 --- a/fs/fscache/operation.c +++ b/fs/fscache/operation.c @@ -34,32 +34,31 @@ void fscache_enqueue_operation(struct fscache_operation *op) fscache_set_op_state(op, "EnQ"); + ASSERT(list_empty(&op->pend_link)); ASSERT(op->processor != NULL); ASSERTCMP(op->object->state, >=, FSCACHE_OBJECT_AVAILABLE); ASSERTCMP(atomic_read(&op->usage), >, 0); - if (list_empty(&op->pend_link)) { - switch (op->flags & FSCACHE_OP_TYPE) { - case FSCACHE_OP_FAST: - _debug("queue fast"); - atomic_inc(&op->usage); - if (!schedule_work(&op->fast_work)) - fscache_put_operation(op); - break; - case FSCACHE_OP_SLOW: - _debug("queue slow"); - slow_work_enqueue(&op->slow_work); - break; - case FSCACHE_OP_MYTHREAD: - _debug("queue for caller's attention"); - break; - default: - printk(KERN_ERR "FS-Cache: Unexpected op type %lx", - op->flags); - BUG(); - break; - } - fscache_stat(&fscache_n_op_enqueue); + fscache_stat(&fscache_n_op_enqueue); + switch (op->flags & FSCACHE_OP_TYPE) { + case FSCACHE_OP_FAST: + _debug("queue fast"); + atomic_inc(&op->usage); + if (!schedule_work(&op->fast_work)) + fscache_put_operation(op); + break; + case FSCACHE_OP_SLOW: + _debug("queue slow"); + slow_work_enqueue(&op->slow_work); + break; + case FSCACHE_OP_MYTHREAD: + _debug("queue for caller's attention"); + break; + default: + printk(KERN_ERR "FS-Cache: Unexpected op type %lx", + op->flags); + BUG(); + break; } } EXPORT_SYMBOL(fscache_enqueue_operation); @@ -97,6 +96,7 @@ int fscache_submit_exclusive_op(struct fscache_object *object, spin_lock(&object->lock); ASSERTCMP(object->n_ops, >=, object->n_in_progress); ASSERTCMP(object->n_ops, >=, object->n_exclusive); + ASSERT(list_empty(&op->pend_link)); ret = -ENOBUFS; if (fscache_object_is_active(object)) { @@ -202,6 +202,7 @@ int fscache_submit_op(struct fscache_object *object, spin_lock(&object->lock); ASSERTCMP(object->n_ops, >=, object->n_in_progress); ASSERTCMP(object->n_ops, >=, object->n_exclusive); + ASSERT(list_empty(&op->pend_link)); ostate = object->state; smp_rmb(); @@ -273,12 +274,7 @@ void fscache_start_operations(struct fscache_object *object) stop = true; } list_del_init(&op->pend_link); - object->n_in_progress++; - - if (test_and_clear_bit(FSCACHE_OP_WAITING, &op->flags)) - wake_up_bit(&op->flags, FSCACHE_OP_WAITING); - if (op->processor) - fscache_enqueue_operation(op); + fscache_run_op(object, op); /* the pending queue was holding a ref on the object */ fscache_put_operation(op); @@ -290,6 +286,36 @@ void fscache_start_operations(struct fscache_object *object) object->n_in_progress, object->debug_id); } +/* + * cancel an operation that's pending on an object + */ +int fscache_cancel_op(struct fscache_operation *op) +{ + struct fscache_object *object = op->object; + int ret; + + _enter("OBJ%x OP%x}", op->object->debug_id, op->debug_id); + + spin_lock(&object->lock); + + ret = -EBUSY; + if (!list_empty(&op->pend_link)) { + fscache_stat(&fscache_n_op_cancelled); + list_del_init(&op->pend_link); + object->n_ops--; + if (test_bit(FSCACHE_OP_EXCLUSIVE, &op->flags)) + object->n_exclusive--; + if (test_and_clear_bit(FSCACHE_OP_WAITING, &op->flags)) + wake_up_bit(&op->flags, FSCACHE_OP_WAITING); + fscache_put_operation(op); + ret = 0; + } + + spin_unlock(&object->lock); + _leave(" = %d", ret); + return ret; +} + /* * release an operation * - queues pending ops if this is the last in-progress op diff --git a/fs/fscache/page.c b/fs/fscache/page.c index 250dfd34c07b..e6f2e61133a1 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -295,8 +295,20 @@ int __fscache_read_or_alloc_page(struct fscache_cookie *cookie, if (test_bit(FSCACHE_OP_WAITING, &op->op.flags)) { _debug(">>> WT"); fscache_stat(&fscache_n_retrieval_op_waits); - wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit, TASK_UNINTERRUPTIBLE); + if (wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, + fscache_wait_bit_interruptible, + TASK_INTERRUPTIBLE) < 0) { + ret = fscache_cancel_op(&op->op); + if (ret == 0) { + ret = -ERESTARTSYS; + goto error; + } + + /* it's been removed from the pending queue by another + * party, so we should get to run shortly */ + wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, + fscache_wait_bit, TASK_UNINTERRUPTIBLE); + } _debug("<<< GO"); } @@ -313,6 +325,7 @@ int __fscache_read_or_alloc_page(struct fscache_cookie *cookie, fscache_stat_d(&fscache_n_cop_read_or_alloc_page); } +error: if (ret == -ENOMEM) fscache_stat(&fscache_n_retrievals_nomem); else if (ret == -ERESTARTSYS) @@ -412,8 +425,20 @@ int __fscache_read_or_alloc_pages(struct fscache_cookie *cookie, if (test_bit(FSCACHE_OP_WAITING, &op->op.flags)) { _debug(">>> WT"); fscache_stat(&fscache_n_retrieval_op_waits); - wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit, TASK_UNINTERRUPTIBLE); + if (wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, + fscache_wait_bit_interruptible, + TASK_INTERRUPTIBLE) < 0) { + ret = fscache_cancel_op(&op->op); + if (ret == 0) { + ret = -ERESTARTSYS; + goto error; + } + + /* it's been removed from the pending queue by another + * party, so we should get to run shortly */ + wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, + fscache_wait_bit, TASK_UNINTERRUPTIBLE); + } _debug("<<< GO"); } @@ -430,6 +455,7 @@ int __fscache_read_or_alloc_pages(struct fscache_cookie *cookie, fscache_stat_d(&fscache_n_cop_read_or_alloc_pages); } +error: if (ret == -ENOMEM) fscache_stat(&fscache_n_retrievals_nomem); else if (ret == -ERESTARTSYS) @@ -505,8 +531,20 @@ int __fscache_alloc_page(struct fscache_cookie *cookie, if (test_bit(FSCACHE_OP_WAITING, &op->op.flags)) { _debug(">>> WT"); fscache_stat(&fscache_n_alloc_op_waits); - wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit, TASK_UNINTERRUPTIBLE); + if (wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, + fscache_wait_bit_interruptible, + TASK_INTERRUPTIBLE) < 0) { + ret = fscache_cancel_op(&op->op); + if (ret == 0) { + ret = -ERESTARTSYS; + goto error; + } + + /* it's been removed from the pending queue by another + * party, so we should get to run shortly */ + wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, + fscache_wait_bit, TASK_UNINTERRUPTIBLE); + } _debug("<<< GO"); } @@ -515,7 +553,10 @@ int __fscache_alloc_page(struct fscache_cookie *cookie, ret = object->cache->ops->allocate_page(op, page, gfp); fscache_stat_d(&fscache_n_cop_allocate_page); - if (ret < 0) +error: + if (ret == -ERESTARTSYS) + fscache_stat(&fscache_n_allocs_intr); + else if (ret < 0) fscache_stat(&fscache_n_allocs_nobufs); else fscache_stat(&fscache_n_allocs_ok); diff --git a/fs/fscache/stats.c b/fs/fscache/stats.c index 20233fb44bfd..4c07439d1307 100644 --- a/fs/fscache/stats.c +++ b/fs/fscache/stats.c @@ -25,6 +25,7 @@ atomic_t fscache_n_op_requeue; atomic_t fscache_n_op_deferred_release; atomic_t fscache_n_op_release; atomic_t fscache_n_op_gc; +atomic_t fscache_n_op_cancelled; atomic_t fscache_n_attr_changed; atomic_t fscache_n_attr_changed_ok; @@ -36,6 +37,7 @@ atomic_t fscache_n_allocs; atomic_t fscache_n_allocs_ok; atomic_t fscache_n_allocs_wait; atomic_t fscache_n_allocs_nobufs; +atomic_t fscache_n_allocs_intr; atomic_t fscache_n_alloc_ops; atomic_t fscache_n_alloc_op_waits; @@ -169,11 +171,12 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_attr_changed_nomem), atomic_read(&fscache_n_attr_changed_calls)); - seq_printf(m, "Allocs : n=%u ok=%u wt=%u nbf=%u\n", + seq_printf(m, "Allocs : n=%u ok=%u wt=%u nbf=%u int=%u\n", atomic_read(&fscache_n_allocs), atomic_read(&fscache_n_allocs_ok), atomic_read(&fscache_n_allocs_wait), - atomic_read(&fscache_n_allocs_nobufs)); + atomic_read(&fscache_n_allocs_nobufs), + atomic_read(&fscache_n_allocs_intr)); seq_printf(m, "Allocs : ops=%u owt=%u\n", atomic_read(&fscache_n_alloc_ops), atomic_read(&fscache_n_alloc_op_waits)); @@ -201,10 +204,11 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_store_ops), atomic_read(&fscache_n_store_calls)); - seq_printf(m, "Ops : pend=%u run=%u enq=%u\n", + seq_printf(m, "Ops : pend=%u run=%u enq=%u can=%u\n", atomic_read(&fscache_n_op_pend), atomic_read(&fscache_n_op_run), - atomic_read(&fscache_n_op_enqueue)); + atomic_read(&fscache_n_op_enqueue), + atomic_read(&fscache_n_op_cancelled)); seq_printf(m, "Ops : dfr=%u rel=%u gc=%u\n", atomic_read(&fscache_n_op_deferred_release), atomic_read(&fscache_n_op_release), From 6897e3df8fc37bd4a58bbcdef8306da7fc175584 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:22 +0000 Subject: [PATCH 533/743] FS-Cache: The object-available state can't rely on the cookie to be available The object-available state in the object processing state machine (as processed by fscache_object_available()) can't rely on the cookie to be available because the FSCACHE_COOKIE_CREATING bit may have been cleared by fscache_obtained_object() prior to the object being put into the FSCACHE_OBJECT_AVAILABLE state. Clearing the FSCACHE_COOKIE_CREATING bit on a cookie permits __fscache_relinquish_cookie() to proceed and detach the cookie from the object. To deal with this, we don't dereference object->cookie in fscache_object_available() if the object has already been detached. In addition, a couple of assertions are added into fscache_drop_object() to make sure the object is unbound from the cookie before it gets there. Signed-off-by: David Howells --- fs/fscache/object.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/fscache/object.c b/fs/fscache/object.c index 0d65c0c92b46..1a1afa82f798 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -158,7 +158,8 @@ static void fscache_object_state_machine(struct fscache_object *object) spin_lock(&object->lock); object->state = FSCACHE_OBJECT_DYING; - if (test_and_clear_bit(FSCACHE_COOKIE_CREATING, + if (object->cookie && + test_and_clear_bit(FSCACHE_COOKIE_CREATING, &object->cookie->flags)) wake_up_bit(&object->cookie->flags, FSCACHE_COOKIE_CREATING); @@ -594,7 +595,8 @@ static void fscache_object_available(struct fscache_object *object) spin_lock(&object->lock); - if (test_and_clear_bit(FSCACHE_COOKIE_CREATING, &object->cookie->flags)) + if (object->cookie && + test_and_clear_bit(FSCACHE_COOKIE_CREATING, &object->cookie->flags)) wake_up_bit(&object->cookie->flags, FSCACHE_COOKIE_CREATING); fscache_done_parent_op(object); @@ -631,6 +633,9 @@ static void fscache_drop_object(struct fscache_object *object) _enter("{OBJ%x,%d}", object->debug_id, object->n_children); + ASSERTCMP(object->cookie, ==, NULL); + ASSERT(hlist_unhashed(&object->cookie_link)); + spin_lock(&cache->object_list_lock); list_del_init(&object->cache_link); spin_unlock(&cache->object_list_lock); From 1bccf513ac49d44604ba1cddcc29f5886e70f1b6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:25 +0000 Subject: [PATCH 534/743] FS-Cache: Fix lock misorder in fscache_write_op() FS-Cache has two structs internally for keeping track of the internal state of a cached file: the fscache_cookie struct, which represents the netfs's state, and fscache_object struct, which represents the cache's state. Each has a pointer that points to the other (when both are in existence), and each has a spinlock for pointer maintenance. Since netfs operations approach these structures from the cookie side, they get the cookie lock first, then the object lock. Cache operations, on the other hand, approach from the object side, and get the object lock first. It is not then permitted for a cache operation to get the cookie lock whilst it is holding the object lock lest deadlock occur; instead, it must do one of two things: (1) increment the cookie usage counter, drop the object lock and then get both locks in order, or (2) simply hold the object lock as certain parts of the cookie may not be altered whilst the object lock is held. It is also not permitted to follow either pointer without holding the lock at the end you start with. To break the pointers between the cookie and the object, both locks must be held. fscache_write_op(), however, violates the locking rules: It attempts to get the cookie lock without (a) checking that the cookie pointer is a valid pointer, and (b) holding the object lock to protect the cookie pointer whilst it follows it. This is so that it can access the pending page store tree without interference from __fscache_write_page(). This is fixed by splitting the cookie lock, such that the page store tracking tree is protected by its own lock, and checking that the cookie pointer is non-NULL before we attempt to follow it whilst holding the object lock. The new lock is subordinate to both the cookie lock and the object lock, and so should be taken after those. Signed-off-by: David Howells --- Documentation/filesystems/caching/fscache.txt | 3 ++ fs/fscache/cookie.c | 1 + fs/fscache/internal.h | 4 ++ fs/fscache/page.c | 52 +++++++++++++------ fs/fscache/stats.c | 10 +++- include/linux/fscache-cache.h | 1 + 6 files changed, 52 insertions(+), 19 deletions(-) diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt index 0a77868f4977..9cf2cfbc81c9 100644 --- a/Documentation/filesystems/caching/fscache.txt +++ b/Documentation/filesystems/caching/fscache.txt @@ -269,6 +269,9 @@ proc files. oom=N Number of store reqs failed -ENOMEM ops=N Number of store reqs submitted run=N Number of store reqs granted CPU time + pgs=N Number of pages given store req processing time + rxd=N Number of store reqs deleted from tracking tree + olm=N Number of store reqs over store limit Ops pend=N Number of times async ops added to pending queues run=N Number of times async ops given CPU time enq=N Number of times async ops queued for processing diff --git a/fs/fscache/cookie.c b/fs/fscache/cookie.c index e6854f5222f5..f979659c1b3f 100644 --- a/fs/fscache/cookie.c +++ b/fs/fscache/cookie.c @@ -36,6 +36,7 @@ void fscache_cookie_init_once(void *_cookie) memset(cookie, 0, sizeof(*cookie)); spin_lock_init(&cookie->lock); + spin_lock_init(&cookie->stores_lock); INIT_HLIST_HEAD(&cookie->backing_objects); } diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index 50324ad2b194..ba1853fa1ff9 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -17,6 +17,7 @@ * - cache->object_list_lock * - object->lock * - object->parent->lock + * - cookie->stores_lock * - fscache_thread_lock * */ @@ -174,6 +175,9 @@ extern atomic_t fscache_n_stores_nobufs; extern atomic_t fscache_n_stores_oom; extern atomic_t fscache_n_store_ops; extern atomic_t fscache_n_store_calls; +extern atomic_t fscache_n_store_pages; +extern atomic_t fscache_n_store_radix_deletes; +extern atomic_t fscache_n_store_pages_over_limit; extern atomic_t fscache_n_marks; extern atomic_t fscache_n_uncaches; diff --git a/fs/fscache/page.c b/fs/fscache/page.c index e6f2e61133a1..3ea8897bc217 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -45,16 +45,26 @@ EXPORT_SYMBOL(__fscache_wait_on_page_write); /* * note that a page has finished being written to the cache */ -static void fscache_end_page_write(struct fscache_cookie *cookie, struct page *page) +static void fscache_end_page_write(struct fscache_object *object, + struct page *page) { - struct page *xpage; + struct fscache_cookie *cookie; + struct page *xpage = NULL; - spin_lock(&cookie->lock); - xpage = radix_tree_delete(&cookie->stores, page->index); - spin_unlock(&cookie->lock); - ASSERT(xpage != NULL); - - wake_up_bit(&cookie->flags, 0); + spin_lock(&object->lock); + cookie = object->cookie; + if (cookie) { + /* delete the page from the tree if it is now no longer + * pending */ + spin_lock(&cookie->stores_lock); + fscache_stat(&fscache_n_store_radix_deletes); + xpage = radix_tree_delete(&cookie->stores, page->index); + spin_unlock(&cookie->stores_lock); + wake_up_bit(&cookie->flags, 0); + } + spin_unlock(&object->lock); + if (xpage) + page_cache_release(xpage); } /* @@ -591,7 +601,7 @@ static void fscache_write_op(struct fscache_operation *_op) struct fscache_storage *op = container_of(_op, struct fscache_storage, op); struct fscache_object *object = op->op.object; - struct fscache_cookie *cookie = object->cookie; + struct fscache_cookie *cookie; struct page *page; unsigned n; void *results[1]; @@ -601,16 +611,17 @@ static void fscache_write_op(struct fscache_operation *_op) fscache_set_op_state(&op->op, "GetPage"); - spin_lock(&cookie->lock); spin_lock(&object->lock); + cookie = object->cookie; - if (!fscache_object_is_active(object)) { + if (!fscache_object_is_active(object) || !cookie) { spin_unlock(&object->lock); - spin_unlock(&cookie->lock); _leave(""); return; } + spin_lock(&cookie->stores_lock); + fscache_stat(&fscache_n_store_calls); /* find a page to store */ @@ -621,23 +632,25 @@ static void fscache_write_op(struct fscache_operation *_op) goto superseded; page = results[0]; _debug("gang %d [%lx]", n, page->index); - if (page->index > op->store_limit) + if (page->index > op->store_limit) { + fscache_stat(&fscache_n_store_pages_over_limit); goto superseded; + } radix_tree_tag_clear(&cookie->stores, page->index, FSCACHE_COOKIE_PENDING_TAG); + spin_unlock(&cookie->stores_lock); spin_unlock(&object->lock); - spin_unlock(&cookie->lock); if (page) { fscache_set_op_state(&op->op, "Store"); + fscache_stat(&fscache_n_store_pages); fscache_stat(&fscache_n_cop_write_page); ret = object->cache->ops->write_page(op, page); fscache_stat_d(&fscache_n_cop_write_page); fscache_set_op_state(&op->op, "EndWrite"); - fscache_end_page_write(cookie, page); - page_cache_release(page); + fscache_end_page_write(object, page); if (ret < 0) { fscache_set_op_state(&op->op, "Abort"); fscache_abort_object(object); @@ -653,9 +666,9 @@ superseded: /* this writer is going away and there aren't any more things to * write */ _debug("cease"); + spin_unlock(&cookie->stores_lock); clear_bit(FSCACHE_OBJECT_PENDING_WRITE, &object->flags); spin_unlock(&object->lock); - spin_unlock(&cookie->lock); _leave(""); } @@ -731,6 +744,7 @@ int __fscache_write_page(struct fscache_cookie *cookie, /* add the page to the pending-storage radix tree on the backing * object */ spin_lock(&object->lock); + spin_lock(&cookie->stores_lock); _debug("store limit %llx", (unsigned long long) object->store_limit); @@ -751,6 +765,7 @@ int __fscache_write_page(struct fscache_cookie *cookie, if (test_and_set_bit(FSCACHE_OBJECT_PENDING_WRITE, &object->flags)) goto already_pending; + spin_unlock(&cookie->stores_lock); spin_unlock(&object->lock); op->op.debug_id = atomic_inc_return(&fscache_op_debug_id); @@ -772,6 +787,7 @@ int __fscache_write_page(struct fscache_cookie *cookie, already_queued: fscache_stat(&fscache_n_stores_again); already_pending: + spin_unlock(&cookie->stores_lock); spin_unlock(&object->lock); spin_unlock(&cookie->lock); radix_tree_preload_end(); @@ -781,7 +797,9 @@ already_pending: return 0; submit_failed: + spin_lock(&cookie->stores_lock); radix_tree_delete(&cookie->stores, page->index); + spin_unlock(&cookie->stores_lock); page_cache_release(page); ret = -ENOBUFS; goto nobufs; diff --git a/fs/fscache/stats.c b/fs/fscache/stats.c index 4c07439d1307..1d53ea68409e 100644 --- a/fs/fscache/stats.c +++ b/fs/fscache/stats.c @@ -58,6 +58,9 @@ atomic_t fscache_n_stores_nobufs; atomic_t fscache_n_stores_oom; atomic_t fscache_n_store_ops; atomic_t fscache_n_store_calls; +atomic_t fscache_n_store_pages; +atomic_t fscache_n_store_radix_deletes; +atomic_t fscache_n_store_pages_over_limit; atomic_t fscache_n_marks; atomic_t fscache_n_uncaches; @@ -200,9 +203,12 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_stores_again), atomic_read(&fscache_n_stores_nobufs), atomic_read(&fscache_n_stores_oom)); - seq_printf(m, "Stores : ops=%u run=%u\n", + seq_printf(m, "Stores : ops=%u run=%u pgs=%u rxd=%u olm=%u\n", atomic_read(&fscache_n_store_ops), - atomic_read(&fscache_n_store_calls)); + atomic_read(&fscache_n_store_calls), + atomic_read(&fscache_n_store_pages), + atomic_read(&fscache_n_store_radix_deletes), + atomic_read(&fscache_n_store_pages_over_limit)); seq_printf(m, "Ops : pend=%u run=%u enq=%u can=%u\n", atomic_read(&fscache_n_op_pend), diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 184cbdfbcc99..f3aa4bdafef6 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -310,6 +310,7 @@ struct fscache_cookie { atomic_t usage; /* number of users of this cookie */ atomic_t n_children; /* number of children of this cookie */ spinlock_t lock; + spinlock_t stores_lock; /* lock on page store tree */ struct hlist_head backing_objects; /* object(s) backing this file/index */ const struct fscache_cookie_def *def; /* definition */ struct fscache_cookie *parent; /* parent of this entry */ From 285e728b0ac55b53a673114096168d6f74930167 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:29 +0000 Subject: [PATCH 535/743] FS-Cache: Don't delete pending pages from the page-store tracking tree Don't delete pending pages from the page-store tracking tree, but rather send them for another write as they've presumably been updated. Signed-off-by: David Howells --- fs/fscache/page.c | 7 +++++-- lib/radix-tree.c | 2 -- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/fs/fscache/page.c b/fs/fscache/page.c index 3ea8897bc217..022a5da8e130 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -57,8 +57,11 @@ static void fscache_end_page_write(struct fscache_object *object, /* delete the page from the tree if it is now no longer * pending */ spin_lock(&cookie->stores_lock); - fscache_stat(&fscache_n_store_radix_deletes); - xpage = radix_tree_delete(&cookie->stores, page->index); + if (!radix_tree_tag_get(&cookie->stores, page->index, + FSCACHE_COOKIE_PENDING_TAG)) { + fscache_stat(&fscache_n_store_radix_deletes); + xpage = radix_tree_delete(&cookie->stores, page->index); + } spin_unlock(&cookie->stores_lock); wake_up_bit(&cookie->flags, 0); } diff --git a/lib/radix-tree.c b/lib/radix-tree.c index ae6106855561..92cdd9936e3d 100644 --- a/lib/radix-tree.c +++ b/lib/radix-tree.c @@ -546,7 +546,6 @@ out: } EXPORT_SYMBOL(radix_tree_tag_clear); -#ifndef __KERNEL__ /* Only the test harness uses this at present */ /** * radix_tree_tag_get - get a tag on a radix tree node * @root: radix tree root @@ -609,7 +608,6 @@ int radix_tree_tag_get(struct radix_tree_root *root, } } EXPORT_SYMBOL(radix_tree_tag_get); -#endif /** * radix_tree_next_hole - find the next hole (not-present entry) From e3d4d28b1c8cc7c26536a50b43d86ccd39878550 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:32 +0000 Subject: [PATCH 536/743] FS-Cache: Handle read request vs lookup, creation or other cache failure FS-Cache doesn't correctly handle the netfs requesting a read from the cache on an object that failed or was withdrawn by the cache. A trace similar to the following might be seen: CacheFiles: Lookup failed error -105 [exe ] unexpected submission OP165afe [OBJ6cac OBJECT_LC_DYING] [exe ] objstate=OBJECT_LC_DYING [OBJECT_LC_DYING] [exe ] objflags=0 [exe ] objevent=9 [fffffffffffffffb] [exe ] ops=0 inp=0 exc=0 Pid: 6970, comm: exe Not tainted 2.6.32-rc6-cachefs #50 Call Trace: [] fscache_submit_op+0x3ff/0x45a [fscache] [] __fscache_read_or_alloc_pages+0x187/0x3c4 [fscache] [] ? nfs_readpage_from_fscache_complete+0x0/0x66 [nfs] [] __nfs_readpages_from_fscache+0x7e/0x176 [nfs] [] ? __alloc_pages_nodemask+0x11c/0x5cf [] nfs_readpages+0x114/0x1d7 [nfs] [] __do_page_cache_readahead+0x15f/0x1ec [] ? __do_page_cache_readahead+0x73/0x1ec [] ra_submit+0x1c/0x20 [] ondemand_readahead+0x227/0x23a [] page_cache_sync_readahead+0x17/0x19 [] generic_file_aio_read+0x236/0x5a0 [] nfs_file_read+0xe4/0xf3 [nfs] [] do_sync_read+0xe3/0x120 [] ? _spin_unlock_irq+0x2b/0x31 [] ? autoremove_wake_function+0x0/0x34 [] ? selinux_file_permission+0x5d/0x10f [] ? thread_return+0x3e/0x101 [] ? security_file_permission+0x11/0x13 [] vfs_read+0xaa/0x16f [] ? trace_hardirqs_on_caller+0x10c/0x130 [] sys_read+0x45/0x6c [] system_call_fastpath+0x16/0x1b The object state might also be OBJECT_DYING or OBJECT_WITHDRAWING. This should be handled by simply rejecting the new operation with ENOBUFS. There's no need to log an error for it. Events of this type now appear in the stats file under Ops:rej. Signed-off-by: David Howells --- Documentation/filesystems/caching/fscache.txt | 1 + fs/fscache/internal.h | 1 + fs/fscache/operation.c | 5 +++++ fs/fscache/stats.c | 6 ++++-- 4 files changed, 11 insertions(+), 2 deletions(-) diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt index 9cf2cfbc81c9..057a3c71d524 100644 --- a/Documentation/filesystems/caching/fscache.txt +++ b/Documentation/filesystems/caching/fscache.txt @@ -276,6 +276,7 @@ proc files. run=N Number of times async ops given CPU time enq=N Number of times async ops queued for processing can=N Number of async ops cancelled + rej=N Number of async ops rejected due to object lookup/create failure dfr=N Number of async ops queued for deferred release rel=N Number of async ops released gc=N Number of deferred-release async ops garbage collected diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index ba1853fa1ff9..a0769872b19c 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -143,6 +143,7 @@ extern atomic_t fscache_n_op_deferred_release; extern atomic_t fscache_n_op_release; extern atomic_t fscache_n_op_gc; extern atomic_t fscache_n_op_cancelled; +extern atomic_t fscache_n_op_rejected; extern atomic_t fscache_n_attr_changed; extern atomic_t fscache_n_attr_changed_ok; diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c index 296492efb81b..313e79a14266 100644 --- a/fs/fscache/operation.c +++ b/fs/fscache/operation.c @@ -232,6 +232,11 @@ int fscache_submit_op(struct fscache_object *object, list_add_tail(&op->pend_link, &object->pending_ops); fscache_stat(&fscache_n_op_pend); ret = 0; + } else if (object->state == FSCACHE_OBJECT_DYING || + object->state == FSCACHE_OBJECT_LC_DYING || + object->state == FSCACHE_OBJECT_WITHDRAWING) { + fscache_stat(&fscache_n_op_rejected); + ret = -ENOBUFS; } else if (!test_bit(FSCACHE_IOERROR, &object->cache->flags)) { fscache_report_unexpected_submission(object, op, ostate); ASSERT(!fscache_object_is_active(object)); diff --git a/fs/fscache/stats.c b/fs/fscache/stats.c index 1d53ea68409e..045ba396dbf2 100644 --- a/fs/fscache/stats.c +++ b/fs/fscache/stats.c @@ -26,6 +26,7 @@ atomic_t fscache_n_op_deferred_release; atomic_t fscache_n_op_release; atomic_t fscache_n_op_gc; atomic_t fscache_n_op_cancelled; +atomic_t fscache_n_op_rejected; atomic_t fscache_n_attr_changed; atomic_t fscache_n_attr_changed_ok; @@ -210,11 +211,12 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_store_radix_deletes), atomic_read(&fscache_n_store_pages_over_limit)); - seq_printf(m, "Ops : pend=%u run=%u enq=%u can=%u\n", + seq_printf(m, "Ops : pend=%u run=%u enq=%u can=%u rej=%u\n", atomic_read(&fscache_n_op_pend), atomic_read(&fscache_n_op_run), atomic_read(&fscache_n_op_enqueue), - atomic_read(&fscache_n_op_cancelled)); + atomic_read(&fscache_n_op_cancelled), + atomic_read(&fscache_n_op_rejected)); seq_printf(m, "Ops : dfr=%u rel=%u gc=%u\n", atomic_read(&fscache_n_op_deferred_release), atomic_read(&fscache_n_op_release), From 201a15428bd54f83eccec8b7c64a04b8f9431204 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:35 +0000 Subject: [PATCH 537/743] FS-Cache: Handle pages pending storage that get evicted under OOM conditions Handle netfs pages that the vmscan algorithm wants to evict from the pagecache under OOM conditions, but that are waiting for write to the cache. Under these conditions, vmscan calls the releasepage() function of the netfs, asking if a page can be discarded. The problem is typified by the following trace of a stuck process: kslowd005 D 0000000000000000 0 4253 2 0x00000080 ffff88001b14f370 0000000000000046 ffff880020d0d000 0000000000000007 0000000000000006 0000000000000001 ffff88001b14ffd8 ffff880020d0d2a8 000000000000ddf0 00000000000118c0 00000000000118c0 ffff880020d0d2a8 Call Trace: [] __fscache_wait_on_page_write+0x8b/0xa7 [fscache] [] ? autoremove_wake_function+0x0/0x34 [] ? __fscache_check_page_write+0x63/0x70 [fscache] [] nfs_fscache_release_page+0x4e/0xc4 [nfs] [] nfs_release_page+0x3c/0x41 [nfs] [] try_to_release_page+0x32/0x3b [] shrink_page_list+0x316/0x4ac [] shrink_inactive_list+0x392/0x67c [] ? __mutex_unlock_slowpath+0x100/0x10b [] ? trace_hardirqs_on_caller+0x10c/0x130 [] ? mutex_unlock+0x9/0xb [] shrink_list+0x8d/0x8f [] shrink_zone+0x278/0x33c [] ? ktime_get_ts+0xad/0xba [] try_to_free_pages+0x22e/0x392 [] ? isolate_pages_global+0x0/0x212 [] __alloc_pages_nodemask+0x3dc/0x5cf [] grab_cache_page_write_begin+0x65/0xaa [] ext3_write_begin+0x78/0x1eb [] generic_file_buffered_write+0x109/0x28c [] ? current_fs_time+0x22/0x29 [] __generic_file_aio_write+0x350/0x385 [] ? generic_file_aio_write+0x4a/0xae [] generic_file_aio_write+0x60/0xae [] do_sync_write+0xe3/0x120 [] ? autoremove_wake_function+0x0/0x34 [] ? __dentry_open+0x1a5/0x2b8 [] ? dentry_open+0x82/0x89 [] cachefiles_write_page+0x298/0x335 [cachefiles] [] fscache_write_op+0x178/0x2c2 [fscache] [] fscache_op_execute+0x7a/0xd1 [fscache] [] slow_work_execute+0x18f/0x2d1 [] slow_work_thread+0x1c5/0x308 [] ? autoremove_wake_function+0x0/0x34 [] ? slow_work_thread+0x0/0x308 [] kthread+0x7a/0x82 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? tg_shares_up+0x171/0x227 [] ? kthread+0x0/0x82 [] ? child_rip+0x0/0x20 In the above backtrace, the following is happening: (1) A page storage operation is being executed by a slow-work thread (fscache_write_op()). (2) FS-Cache farms the operation out to the cache to perform (cachefiles_write_page()). (3) CacheFiles is then calling Ext3 to perform the actual write, using Ext3's standard write (do_sync_write()) under KERNEL_DS directly from the netfs page. (4) However, for Ext3 to perform the write, it must allocate some memory, in particular, it must allocate at least one page cache page into which it can copy the data from the netfs page. (5) Under OOM conditions, the memory allocator can't immediately come up with a page, so it uses vmscan to find something to discard (try_to_free_pages()). (6) vmscan finds a clean netfs page it might be able to discard (possibly the one it's trying to write out). (7) The netfs is called to throw the page away (nfs_release_page()) - but it's called with __GFP_WAIT, so the netfs decides to wait for the store to complete (__fscache_wait_on_page_write()). (8) This blocks a slow-work processing thread - possibly against itself. The system ends up stuck because it can't write out any netfs pages to the cache without allocating more memory. To avoid this, we make FS-Cache cancel some writes that aren't in the middle of actually being performed. This means that some data won't make it into the cache this time. To support this, a new FS-Cache function is added fscache_maybe_release_page() that replaces what the netfs releasepage() functions used to do with respect to the cache. The decisions fscache_maybe_release_page() makes are counted and displayed through /proc/fs/fscache/stats on a line labelled "VmScan". There are four counters provided: "nos=N" - pages that weren't pending storage; "gon=N" - pages that were pending storage when we first looked, but weren't by the time we got the object lock; "bsy=N" - pages that we ignored as they were actively being written when we looked; and "can=N" - pages that we cancelled the storage of. What I'd really like to do is alter the behaviour of the cancellation heuristics, depending on how necessary it is to expel pages. If there are plenty of other pages that aren't waiting to be written to the cache that could be ejected first, then it would be nice to hold up on immediate cancellation of cache writes - but I don't see a way of doing that. Signed-off-by: David Howells --- Documentation/filesystems/caching/fscache.txt | 4 + .../filesystems/caching/netfs-api.txt | 21 ++++- fs/9p/cache.c | 14 +--- fs/afs/file.c | 15 +--- fs/fscache/internal.h | 5 ++ fs/fscache/page.c | 79 ++++++++++++++++++- fs/fscache/stats.c | 11 +++ fs/nfs/fscache.c | 10 +-- include/linux/fscache-cache.h | 1 + include/linux/fscache.h | 27 +++++++ 10 files changed, 152 insertions(+), 35 deletions(-) diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt index 057a3c71d524..7097fd29fb3d 100644 --- a/Documentation/filesystems/caching/fscache.txt +++ b/Documentation/filesystems/caching/fscache.txt @@ -272,6 +272,10 @@ proc files. pgs=N Number of pages given store req processing time rxd=N Number of store reqs deleted from tracking tree olm=N Number of store reqs over store limit + VmScan nos=N Number of release reqs against pages with no pending store + gon=N Number of release reqs against pages stored by time lock granted + bsy=N Number of release reqs ignored due to in-progress store + can=N Number of page stores cancelled due to release req Ops pend=N Number of times async ops added to pending queues run=N Number of times async ops given CPU time enq=N Number of times async ops queued for processing diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt index 2666b1ed5e9e..1902c57b72ef 100644 --- a/Documentation/filesystems/caching/netfs-api.txt +++ b/Documentation/filesystems/caching/netfs-api.txt @@ -641,7 +641,7 @@ data file must be retired (see the relinquish cookie function below). Furthermore, note that this does not cancel the asynchronous read or write operation started by the read/alloc and write functions, so the page -invalidation and release functions must use: +invalidation functions must use: bool fscache_check_page_write(struct fscache_cookie *cookie, struct page *page); @@ -654,6 +654,25 @@ to see if a page is being written to the cache, and: to wait for it to finish if it is. +When releasepage() is being implemented, a special FS-Cache function exists to +manage the heuristics of coping with vmscan trying to eject pages, which may +conflict with the cache trying to write pages to the cache (which may itself +need to allocate memory): + + bool fscache_maybe_release_page(struct fscache_cookie *cookie, + struct page *page, + gfp_t gfp); + +This takes the netfs cookie, and the page and gfp arguments as supplied to +releasepage(). It will return false if the page cannot be released yet for +some reason and if it returns true, the page has been uncached and can now be +released. + +To make a page available for release, this function may wait for an outstanding +storage request to complete, or it may attempt to cancel the storage request - +in which case the page will not be stored in the cache this time. + + ========================== INDEX AND DATA FILE UPDATE ========================== diff --git a/fs/9p/cache.c b/fs/9p/cache.c index 51c94e26a346..bcc5357a9069 100644 --- a/fs/9p/cache.c +++ b/fs/9p/cache.c @@ -343,18 +343,7 @@ int __v9fs_fscache_release_page(struct page *page, gfp_t gfp) BUG_ON(!vcookie->fscache); - if (PageFsCache(page)) { - if (fscache_check_page_write(vcookie->fscache, page)) { - if (!(gfp & __GFP_WAIT)) - return 0; - fscache_wait_on_page_write(vcookie->fscache, page); - } - - fscache_uncache_page(vcookie->fscache, page); - ClearPageFsCache(page); - } - - return 1; + return fscache_maybe_release_page(vnode->cache, page, gfp); } void __v9fs_fscache_invalidate_page(struct page *page) @@ -368,7 +357,6 @@ void __v9fs_fscache_invalidate_page(struct page *page) fscache_wait_on_page_write(vcookie->fscache, page); BUG_ON(!PageLocked(page)); fscache_uncache_page(vcookie->fscache, page); - ClearPageFsCache(page); } } diff --git a/fs/afs/file.c b/fs/afs/file.c index 681c2a7b013f..39b301662f22 100644 --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -315,7 +315,6 @@ static void afs_invalidatepage(struct page *page, unsigned long offset) struct afs_vnode *vnode = AFS_FS_I(page->mapping->host); fscache_wait_on_page_write(vnode->cache, page); fscache_uncache_page(vnode->cache, page); - ClearPageFsCache(page); } #endif @@ -349,17 +348,9 @@ static int afs_releasepage(struct page *page, gfp_t gfp_flags) /* deny if page is being written to the cache and the caller hasn't * elected to wait */ #ifdef CONFIG_AFS_FSCACHE - if (PageFsCache(page)) { - if (fscache_check_page_write(vnode->cache, page)) { - if (!(gfp_flags & __GFP_WAIT)) { - _leave(" = F [cache busy]"); - return 0; - } - fscache_wait_on_page_write(vnode->cache, page); - } - - fscache_uncache_page(vnode->cache, page); - ClearPageFsCache(page); + if (!fscache_maybe_release_page(vnode->cache, page, gfp_flags)) { + _leave(" = F [cache busy]"); + return 0; } #endif diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index a0769872b19c..e5046519b153 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -180,6 +180,11 @@ extern atomic_t fscache_n_store_pages; extern atomic_t fscache_n_store_radix_deletes; extern atomic_t fscache_n_store_pages_over_limit; +extern atomic_t fscache_n_store_vmscan_not_storing; +extern atomic_t fscache_n_store_vmscan_gone; +extern atomic_t fscache_n_store_vmscan_busy; +extern atomic_t fscache_n_store_vmscan_cancelled; + extern atomic_t fscache_n_marks; extern atomic_t fscache_n_uncaches; diff --git a/fs/fscache/page.c b/fs/fscache/page.c index 022a5da8e130..fc76798bd968 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -42,6 +42,75 @@ void __fscache_wait_on_page_write(struct fscache_cookie *cookie, struct page *pa } EXPORT_SYMBOL(__fscache_wait_on_page_write); +/* + * decide whether a page can be released, possibly by cancelling a store to it + * - we're allowed to sleep if __GFP_WAIT is flagged + */ +bool __fscache_maybe_release_page(struct fscache_cookie *cookie, + struct page *page, + gfp_t gfp) +{ + struct page *xpage; + void *val; + + _enter("%p,%p,%x", cookie, page, gfp); + + rcu_read_lock(); + val = radix_tree_lookup(&cookie->stores, page->index); + if (!val) { + rcu_read_unlock(); + fscache_stat(&fscache_n_store_vmscan_not_storing); + __fscache_uncache_page(cookie, page); + return true; + } + + /* see if the page is actually undergoing storage - if so we can't get + * rid of it till the cache has finished with it */ + if (radix_tree_tag_get(&cookie->stores, page->index, + FSCACHE_COOKIE_STORING_TAG)) { + rcu_read_unlock(); + goto page_busy; + } + + /* the page is pending storage, so we attempt to cancel the store and + * discard the store request so that the page can be reclaimed */ + spin_lock(&cookie->stores_lock); + rcu_read_unlock(); + + if (radix_tree_tag_get(&cookie->stores, page->index, + FSCACHE_COOKIE_STORING_TAG)) { + /* the page started to undergo storage whilst we were looking, + * so now we can only wait or return */ + spin_unlock(&cookie->stores_lock); + goto page_busy; + } + + xpage = radix_tree_delete(&cookie->stores, page->index); + spin_unlock(&cookie->stores_lock); + + if (xpage) { + fscache_stat(&fscache_n_store_vmscan_cancelled); + fscache_stat(&fscache_n_store_radix_deletes); + ASSERTCMP(xpage, ==, page); + } else { + fscache_stat(&fscache_n_store_vmscan_gone); + } + + wake_up_bit(&cookie->flags, 0); + if (xpage) + page_cache_release(xpage); + __fscache_uncache_page(cookie, page); + return true; + +page_busy: + /* we might want to wait here, but that could deadlock the allocator as + * the slow-work threads writing to the cache may all end up sleeping + * on memory allocation */ + fscache_stat(&fscache_n_store_vmscan_busy); + return false; +} +EXPORT_SYMBOL(__fscache_maybe_release_page); + /* * note that a page has finished being written to the cache */ @@ -57,6 +126,8 @@ static void fscache_end_page_write(struct fscache_object *object, /* delete the page from the tree if it is now no longer * pending */ spin_lock(&cookie->stores_lock); + radix_tree_tag_clear(&cookie->stores, page->index, + FSCACHE_COOKIE_STORING_TAG); if (!radix_tree_tag_get(&cookie->stores, page->index, FSCACHE_COOKIE_PENDING_TAG)) { fscache_stat(&fscache_n_store_radix_deletes); @@ -640,8 +711,12 @@ static void fscache_write_op(struct fscache_operation *_op) goto superseded; } - radix_tree_tag_clear(&cookie->stores, page->index, - FSCACHE_COOKIE_PENDING_TAG); + if (page) { + radix_tree_tag_set(&cookie->stores, page->index, + FSCACHE_COOKIE_STORING_TAG); + radix_tree_tag_clear(&cookie->stores, page->index, + FSCACHE_COOKIE_PENDING_TAG); + } spin_unlock(&cookie->stores_lock); spin_unlock(&object->lock); diff --git a/fs/fscache/stats.c b/fs/fscache/stats.c index 045ba396dbf2..cda69994e06d 100644 --- a/fs/fscache/stats.c +++ b/fs/fscache/stats.c @@ -63,6 +63,11 @@ atomic_t fscache_n_store_pages; atomic_t fscache_n_store_radix_deletes; atomic_t fscache_n_store_pages_over_limit; +atomic_t fscache_n_store_vmscan_not_storing; +atomic_t fscache_n_store_vmscan_gone; +atomic_t fscache_n_store_vmscan_busy; +atomic_t fscache_n_store_vmscan_cancelled; + atomic_t fscache_n_marks; atomic_t fscache_n_uncaches; @@ -211,6 +216,12 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_store_radix_deletes), atomic_read(&fscache_n_store_pages_over_limit)); + seq_printf(m, "VmScan : nos=%u gon=%u bsy=%u can=%u\n", + atomic_read(&fscache_n_store_vmscan_not_storing), + atomic_read(&fscache_n_store_vmscan_gone), + atomic_read(&fscache_n_store_vmscan_busy), + atomic_read(&fscache_n_store_vmscan_cancelled)); + seq_printf(m, "Ops : pend=%u run=%u enq=%u can=%u rej=%u\n", atomic_read(&fscache_n_op_pend), atomic_read(&fscache_n_op_run), diff --git a/fs/nfs/fscache.c b/fs/nfs/fscache.c index 70fad69eb959..fa588006588d 100644 --- a/fs/nfs/fscache.c +++ b/fs/nfs/fscache.c @@ -359,17 +359,13 @@ int nfs_fscache_release_page(struct page *page, gfp_t gfp) BUG_ON(!cookie); - if (fscache_check_page_write(cookie, page)) { - if (!(gfp & __GFP_WAIT)) - return 0; - fscache_wait_on_page_write(cookie, page); - } - if (PageFsCache(page)) { dfprintk(FSCACHE, "NFS: fscache releasepage (0x%p/0x%p/0x%p)\n", cookie, page, nfsi); - fscache_uncache_page(cookie, page); + if (!fscache_maybe_release_page(cookie, page, gfp)) + return 0; + nfs_add_fscache_stats(page->mapping->host, NFSIOS_FSCACHE_PAGES_UNCACHED, 1); } diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index f3aa4bdafef6..4750d5fb419f 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -317,6 +317,7 @@ struct fscache_cookie { void *netfs_data; /* back pointer to netfs */ struct radix_tree_root stores; /* pages to be stored on this cookie */ #define FSCACHE_COOKIE_PENDING_TAG 0 /* pages tag: pending write to cache */ +#define FSCACHE_COOKIE_STORING_TAG 1 /* pages tag: writing to cache */ unsigned long flags; #define FSCACHE_COOKIE_LOOKING_UP 0 /* T if non-index cookie being looked up still */ diff --git a/include/linux/fscache.h b/include/linux/fscache.h index 6d8ee466e0a0..595ce49288b7 100644 --- a/include/linux/fscache.h +++ b/include/linux/fscache.h @@ -202,6 +202,8 @@ extern int __fscache_write_page(struct fscache_cookie *, struct page *, gfp_t); extern void __fscache_uncache_page(struct fscache_cookie *, struct page *); extern bool __fscache_check_page_write(struct fscache_cookie *, struct page *); extern void __fscache_wait_on_page_write(struct fscache_cookie *, struct page *); +extern bool __fscache_maybe_release_page(struct fscache_cookie *, struct page *, + gfp_t); /** * fscache_register_netfs - Register a filesystem as desiring caching services @@ -615,4 +617,29 @@ void fscache_wait_on_page_write(struct fscache_cookie *cookie, __fscache_wait_on_page_write(cookie, page); } +/** + * fscache_maybe_release_page - Consider releasing a page, cancelling a store + * @cookie: The cookie representing the cache object + * @page: The netfs page that is being cached. + * @gfp: The gfp flags passed to releasepage() + * + * Consider releasing a page for the vmscan algorithm, on behalf of the netfs's + * releasepage() call. A storage request on the page may cancelled if it is + * not currently being processed. + * + * The function returns true if the page no longer has a storage request on it, + * and false if a storage request is left in place. If true is returned, the + * page will have been passed to fscache_uncache_page(). If false is returned + * the page cannot be freed yet. + */ +static inline +bool fscache_maybe_release_page(struct fscache_cookie *cookie, + struct page *page, + gfp_t gfp) +{ + if (fscache_cookie_valid(cookie) && PageFsCache(page)) + return __fscache_maybe_release_page(cookie, page, gfp); + return false; +} + #endif /* _LINUX_FSCACHE_H */ From 2175bb06dc6cf2af9c098a1770561f9e63edae4e Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:38 +0000 Subject: [PATCH 538/743] FS-Cache: Add a retirement stat counter Add a stat counter to count retirement events rather than ordinary release events (the retire argument to fscache_relinquish_cookie()). Signed-off-by: David Howells --- fs/fscache/cookie.c | 2 ++ fs/fscache/internal.h | 1 + fs/fscache/stats.c | 6 ++++-- 3 files changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/fscache/cookie.c b/fs/fscache/cookie.c index f979659c1b3f..990535071a8a 100644 --- a/fs/fscache/cookie.c +++ b/fs/fscache/cookie.c @@ -415,6 +415,8 @@ void __fscache_relinquish_cookie(struct fscache_cookie *cookie, int retire) unsigned long event; fscache_stat(&fscache_n_relinquishes); + if (retire) + fscache_stat(&fscache_n_relinquishes_retire); if (!cookie) { fscache_stat(&fscache_n_relinquishes_null); diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index e5046519b153..2bf463d26080 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -202,6 +202,7 @@ extern atomic_t fscache_n_updates_run; extern atomic_t fscache_n_relinquishes; extern atomic_t fscache_n_relinquishes_null; extern atomic_t fscache_n_relinquishes_waitcrt; +extern atomic_t fscache_n_relinquishes_retire; extern atomic_t fscache_n_cookie_index; extern atomic_t fscache_n_cookie_data; diff --git a/fs/fscache/stats.c b/fs/fscache/stats.c index cda69994e06d..9e15289eb5c1 100644 --- a/fs/fscache/stats.c +++ b/fs/fscache/stats.c @@ -85,6 +85,7 @@ atomic_t fscache_n_updates_run; atomic_t fscache_n_relinquishes; atomic_t fscache_n_relinquishes_null; atomic_t fscache_n_relinquishes_waitcrt; +atomic_t fscache_n_relinquishes_retire; atomic_t fscache_n_cookie_index; atomic_t fscache_n_cookie_data; @@ -168,10 +169,11 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_updates_null), atomic_read(&fscache_n_updates_run)); - seq_printf(m, "Relinqs: n=%u nul=%u wcr=%u\n", + seq_printf(m, "Relinqs: n=%u nul=%u wcr=%u rtr=%u\n", atomic_read(&fscache_n_relinquishes), atomic_read(&fscache_n_relinquishes_null), - atomic_read(&fscache_n_relinquishes_waitcrt)); + atomic_read(&fscache_n_relinquishes_waitcrt), + atomic_read(&fscache_n_relinquishes_retire)); seq_printf(m, "AttrChg: n=%u ok=%u nbf=%u oom=%u run=%u\n", atomic_read(&fscache_n_attr_changed), From d461d26dde901b0523c46b0317e7fccf574a3933 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:41 +0000 Subject: [PATCH 539/743] FS-Cache: Make sure FSCACHE_COOKIE_LOOKING_UP cleared on lookup failure We must make sure that FSCACHE_COOKIE_LOOKING_UP is cleared on lookup failure (if an object reaches the LC_DYING state), and we should clear it before clearing FSCACHE_COOKIE_CREATING. If this doesn't happen then fscache_wait_for_deferred_lookup() may hold allocation and retrieval operations indefinitely until they're interrupted by signals - which in turn pins the dying object until they go away. Signed-off-by: David Howells --- fs/fscache/object.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/fs/fscache/object.c b/fs/fscache/object.c index 1a1afa82f798..74bc562a2cbc 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -105,6 +105,7 @@ static inline void fscache_done_parent_op(struct fscache_object *object) static void fscache_object_state_machine(struct fscache_object *object) { enum fscache_object_state new_state; + struct fscache_cookie *cookie; ASSERT(object != NULL); @@ -158,11 +159,17 @@ static void fscache_object_state_machine(struct fscache_object *object) spin_lock(&object->lock); object->state = FSCACHE_OBJECT_DYING; - if (object->cookie && - test_and_clear_bit(FSCACHE_COOKIE_CREATING, - &object->cookie->flags)) - wake_up_bit(&object->cookie->flags, - FSCACHE_COOKIE_CREATING); + cookie = object->cookie; + if (cookie) { + if (test_and_clear_bit(FSCACHE_COOKIE_LOOKING_UP, + &cookie->flags)) + wake_up_bit(&cookie->flags, + FSCACHE_COOKIE_LOOKING_UP); + if (test_and_clear_bit(FSCACHE_COOKIE_CREATING, + &cookie->flags)) + wake_up_bit(&cookie->flags, + FSCACHE_COOKIE_CREATING); + } spin_unlock(&object->lock); fscache_done_parent_op(object); From 60d543ca724be155c2b6166e36a00c80b21bd810 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:45 +0000 Subject: [PATCH 540/743] FS-Cache: Start processing an object's operations on that object's death Start processing an object's operations when that object moves into the DYING state as the object cannot be destroyed until all its outstanding operations have completed. Furthermore, make sure that read and allocation operations handle being woken up on a dead object. Such events are recorded in the Allocs.abt and Retrvls.abt statistics as viewable through /proc/fs/fscache/stats. The code for waiting for object activation for the read and allocation operations is also extracted into its own function as it is much the same in all cases, differing only in the stats incremented. Signed-off-by: David Howells --- Documentation/filesystems/caching/fscache.txt | 2 + fs/fscache/internal.h | 5 + fs/fscache/object.c | 1 + fs/fscache/page.c | 112 +++++++++--------- fs/fscache/stats.c | 12 +- include/linux/fscache-cache.h | 4 + 6 files changed, 75 insertions(+), 61 deletions(-) diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt index 7097fd29fb3d..3c23411956bb 100644 --- a/Documentation/filesystems/caching/fscache.txt +++ b/Documentation/filesystems/caching/fscache.txt @@ -253,6 +253,7 @@ proc files. int=N Number of alloc reqs aborted -ERESTARTSYS ops=N Number of alloc reqs submitted owt=N Number of alloc reqs waited for CPU time + abt=N Number of alloc reqs aborted due to object death Retrvls n=N Number of retrieval (read) requests seen ok=N Number of successful retr reqs wt=N Number of retr reqs that waited on lookup completion @@ -262,6 +263,7 @@ proc files. oom=N Number of retr reqs failed -ENOMEM ops=N Number of retr reqs submitted owt=N Number of retr reqs waited for CPU time + abt=N Number of retr reqs aborted due to object death Stores n=N Number of storage (write) requests seen ok=N Number of successful store reqs agn=N Number of store reqs on a page already pending storage diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index 2bf463d26080..5b49a373689b 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -156,6 +156,7 @@ extern atomic_t fscache_n_allocs_ok; extern atomic_t fscache_n_allocs_wait; extern atomic_t fscache_n_allocs_nobufs; extern atomic_t fscache_n_allocs_intr; +extern atomic_t fscache_n_allocs_object_dead; extern atomic_t fscache_n_alloc_ops; extern atomic_t fscache_n_alloc_op_waits; @@ -166,6 +167,7 @@ extern atomic_t fscache_n_retrievals_nodata; extern atomic_t fscache_n_retrievals_nobufs; extern atomic_t fscache_n_retrievals_intr; extern atomic_t fscache_n_retrievals_nomem; +extern atomic_t fscache_n_retrievals_object_dead; extern atomic_t fscache_n_retrieval_ops; extern atomic_t fscache_n_retrieval_op_waits; @@ -249,9 +251,12 @@ static inline void fscache_stat_d(atomic_t *stat) atomic_dec(stat); } +#define __fscache_stat(stat) (stat) + extern const struct file_operations fscache_stats_fops; #else +#define __fscache_stat(stat) (NULL) #define fscache_stat(stat) do {} while (0) #endif diff --git a/fs/fscache/object.c b/fs/fscache/object.c index 74bc562a2cbc..c85c9f582166 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -201,6 +201,7 @@ static void fscache_object_state_machine(struct fscache_object *object) } spin_unlock(&object->lock); fscache_enqueue_dependents(object); + fscache_start_operations(object); goto terminal_transit; /* handle an abort during initialisation */ diff --git a/fs/fscache/page.c b/fs/fscache/page.c index fc76798bd968..c598ea4c4e7d 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -313,6 +313,43 @@ static int fscache_wait_for_deferred_lookup(struct fscache_cookie *cookie) return 0; } +/* + * wait for an object to become active (or dead) + */ +static int fscache_wait_for_retrieval_activation(struct fscache_object *object, + struct fscache_retrieval *op, + atomic_t *stat_op_waits, + atomic_t *stat_object_dead) +{ + int ret; + + if (!test_bit(FSCACHE_OP_WAITING, &op->op.flags)) + goto check_if_dead; + + _debug(">>> WT"); + fscache_stat(stat_op_waits); + if (wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, + fscache_wait_bit_interruptible, + TASK_INTERRUPTIBLE) < 0) { + ret = fscache_cancel_op(&op->op); + if (ret == 0) + return -ERESTARTSYS; + + /* it's been removed from the pending queue by another party, + * so we should get to run shortly */ + wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, + fscache_wait_bit, TASK_UNINTERRUPTIBLE); + } + _debug("<<< GO"); + +check_if_dead: + if (unlikely(fscache_object_is_dead(object))) { + fscache_stat(stat_object_dead); + return -ENOBUFS; + } + return 0; +} + /* * read a page from the cache or allocate a block in which to store it * - we return: @@ -376,25 +413,12 @@ int __fscache_read_or_alloc_page(struct fscache_cookie *cookie, /* we wait for the operation to become active, and then process it * *here*, in this thread, and not in the thread pool */ - if (test_bit(FSCACHE_OP_WAITING, &op->op.flags)) { - _debug(">>> WT"); - fscache_stat(&fscache_n_retrieval_op_waits); - if (wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit_interruptible, - TASK_INTERRUPTIBLE) < 0) { - ret = fscache_cancel_op(&op->op); - if (ret == 0) { - ret = -ERESTARTSYS; - goto error; - } - - /* it's been removed from the pending queue by another - * party, so we should get to run shortly */ - wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit, TASK_UNINTERRUPTIBLE); - } - _debug("<<< GO"); - } + ret = fscache_wait_for_retrieval_activation( + object, op, + __fscache_stat(&fscache_n_retrieval_op_waits), + __fscache_stat(&fscache_n_retrievals_object_dead)); + if (ret < 0) + goto error; /* ask the cache to honour the operation */ if (test_bit(FSCACHE_COOKIE_NO_DATA_YET, &object->cookie->flags)) { @@ -506,25 +530,12 @@ int __fscache_read_or_alloc_pages(struct fscache_cookie *cookie, /* we wait for the operation to become active, and then process it * *here*, in this thread, and not in the thread pool */ - if (test_bit(FSCACHE_OP_WAITING, &op->op.flags)) { - _debug(">>> WT"); - fscache_stat(&fscache_n_retrieval_op_waits); - if (wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit_interruptible, - TASK_INTERRUPTIBLE) < 0) { - ret = fscache_cancel_op(&op->op); - if (ret == 0) { - ret = -ERESTARTSYS; - goto error; - } - - /* it's been removed from the pending queue by another - * party, so we should get to run shortly */ - wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit, TASK_UNINTERRUPTIBLE); - } - _debug("<<< GO"); - } + ret = fscache_wait_for_retrieval_activation( + object, op, + __fscache_stat(&fscache_n_retrieval_op_waits), + __fscache_stat(&fscache_n_retrievals_object_dead)); + if (ret < 0) + goto error; /* ask the cache to honour the operation */ if (test_bit(FSCACHE_COOKIE_NO_DATA_YET, &object->cookie->flags)) { @@ -612,25 +623,12 @@ int __fscache_alloc_page(struct fscache_cookie *cookie, fscache_stat(&fscache_n_alloc_ops); - if (test_bit(FSCACHE_OP_WAITING, &op->op.flags)) { - _debug(">>> WT"); - fscache_stat(&fscache_n_alloc_op_waits); - if (wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit_interruptible, - TASK_INTERRUPTIBLE) < 0) { - ret = fscache_cancel_op(&op->op); - if (ret == 0) { - ret = -ERESTARTSYS; - goto error; - } - - /* it's been removed from the pending queue by another - * party, so we should get to run shortly */ - wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit, TASK_UNINTERRUPTIBLE); - } - _debug("<<< GO"); - } + ret = fscache_wait_for_retrieval_activation( + object, op, + __fscache_stat(&fscache_n_alloc_op_waits), + __fscache_stat(&fscache_n_allocs_object_dead)); + if (ret < 0) + goto error; /* ask the cache to honour the operation */ fscache_stat(&fscache_n_cop_allocate_page); diff --git a/fs/fscache/stats.c b/fs/fscache/stats.c index 9e15289eb5c1..05f77caf4a2d 100644 --- a/fs/fscache/stats.c +++ b/fs/fscache/stats.c @@ -39,6 +39,7 @@ atomic_t fscache_n_allocs_ok; atomic_t fscache_n_allocs_wait; atomic_t fscache_n_allocs_nobufs; atomic_t fscache_n_allocs_intr; +atomic_t fscache_n_allocs_object_dead; atomic_t fscache_n_alloc_ops; atomic_t fscache_n_alloc_op_waits; @@ -49,6 +50,7 @@ atomic_t fscache_n_retrievals_nodata; atomic_t fscache_n_retrievals_nobufs; atomic_t fscache_n_retrievals_intr; atomic_t fscache_n_retrievals_nomem; +atomic_t fscache_n_retrievals_object_dead; atomic_t fscache_n_retrieval_ops; atomic_t fscache_n_retrieval_op_waits; @@ -188,9 +190,10 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_allocs_wait), atomic_read(&fscache_n_allocs_nobufs), atomic_read(&fscache_n_allocs_intr)); - seq_printf(m, "Allocs : ops=%u owt=%u\n", + seq_printf(m, "Allocs : ops=%u owt=%u abt=%u\n", atomic_read(&fscache_n_alloc_ops), - atomic_read(&fscache_n_alloc_op_waits)); + atomic_read(&fscache_n_alloc_op_waits), + atomic_read(&fscache_n_allocs_object_dead)); seq_printf(m, "Retrvls: n=%u ok=%u wt=%u nod=%u nbf=%u" " int=%u oom=%u\n", @@ -201,9 +204,10 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_retrievals_nobufs), atomic_read(&fscache_n_retrievals_intr), atomic_read(&fscache_n_retrievals_nomem)); - seq_printf(m, "Retrvls: ops=%u owt=%u\n", + seq_printf(m, "Retrvls: ops=%u owt=%u abt=%u\n", atomic_read(&fscache_n_retrieval_ops), - atomic_read(&fscache_n_retrieval_op_waits)); + atomic_read(&fscache_n_retrieval_op_waits), + atomic_read(&fscache_n_retrievals_object_dead)); seq_printf(m, "Stores : n=%u ok=%u agn=%u nbf=%u oom=%u\n", atomic_read(&fscache_n_stores), diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 4750d5fb419f..907bb56c5888 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -404,6 +404,10 @@ extern const char *fscache_object_states[]; (obj)->state >= FSCACHE_OBJECT_AVAILABLE && \ (obj)->state < FSCACHE_OBJECT_DYING) +#define fscache_object_is_dead(obj) \ + (test_bit(FSCACHE_IOERROR, &(obj)->cache->flags) && \ + (obj)->state >= FSCACHE_OBJECT_DYING) + extern const struct slow_work_ops fscache_object_slow_work_ops; /** From 868411be3f445a83fafbd734f3e426400138add5 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:48 +0000 Subject: [PATCH 541/743] FS-Cache: Actually requeue an object when requested FS-Cache objects have an FSCACHE_OBJECT_EV_REQUEUE event that can theoretically be raised to ask the state machine to requeue the object for further processing before the work function returns to the slow-work facility. However, fscache_object_work_execute() was clearing that bit before checking the event mask to see whether the object has any pending events that require it to be requeued immediately. Instead, the bit should be cleared after the check and enqueue. Signed-off-by: David Howells --- fs/fscache/object.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/fscache/object.c b/fs/fscache/object.c index c85c9f582166..f3f952cf887e 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -353,13 +353,12 @@ static void fscache_object_slow_work_execute(struct slow_work *work) _enter("{OBJ%x}", object->debug_id); - clear_bit(FSCACHE_OBJECT_EV_REQUEUE, &object->events); - start = jiffies; fscache_object_state_machine(object); fscache_hist(fscache_objs_histogram, start); if (object->events & object->event_mask) fscache_enqueue_object(object); + clear_bit(FSCACHE_OBJECT_EV_REQUEUE, &object->events); } /* From a17754fb8c28af19cd70dcbec6d5b0773b94e0c1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:52 +0000 Subject: [PATCH 542/743] CacheFiles: Don't write a full page if there's only a partial page to cache cachefiles_write_page() writes a full page to the backing file for the last page of the netfs file, even if the netfs file's last page is only a partial page. This causes the EOF on the backing file to be extended beyond the EOF of the netfs, and thus the backing file will be truncated by cachefiles_attr_changed() called from cachefiles_lookup_object(). So we need to limit the write we make to the backing file on that last page such that it doesn't push the EOF too far. Also, if a backing file that has a partial page at the end is expanded, we discard the partial page and refetch it on the basis that we then have a hole in the file with invalid data, and should the power go out... A better way to deal with this could be to record a note that the partial page contains invalid data until the correct data is written into it. This isn't a problem for netfs's that discard the whole backing file if the file size changes (such as NFS). Signed-off-by: David Howells --- fs/cachefiles/interface.c | 20 +++++++++++++++++--- fs/cachefiles/rdwr.c | 23 +++++++++++++++++++---- include/linux/fscache-cache.h | 3 +++ 3 files changed, 39 insertions(+), 7 deletions(-) diff --git a/fs/cachefiles/interface.c b/fs/cachefiles/interface.c index dd7f852746cb..8e67abf05985 100644 --- a/fs/cachefiles/interface.c +++ b/fs/cachefiles/interface.c @@ -404,12 +404,26 @@ static int cachefiles_attr_changed(struct fscache_object *_object) if (oi_size == ni_size) return 0; - newattrs.ia_size = ni_size; - newattrs.ia_valid = ATTR_SIZE; - cachefiles_begin_secure(cache, &saved_cred); mutex_lock(&object->backer->d_inode->i_mutex); + + /* if there's an extension to a partial page at the end of the backing + * file, we need to discard the partial page so that we pick up new + * data after it */ + if (oi_size & ~PAGE_MASK && ni_size > oi_size) { + _debug("discard tail %llx", oi_size); + newattrs.ia_valid = ATTR_SIZE; + newattrs.ia_size = oi_size & PAGE_MASK; + ret = notify_change(object->backer, &newattrs); + if (ret < 0) + goto truncate_failed; + } + + newattrs.ia_valid = ATTR_SIZE; + newattrs.ia_size = ni_size; ret = notify_change(object->backer, &newattrs); + +truncate_failed: mutex_unlock(&object->backer->d_inode->i_mutex); cachefiles_end_secure(cache, saved_cred); diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c index 3304646dae84..5a84fd7109ad 100644 --- a/fs/cachefiles/rdwr.c +++ b/fs/cachefiles/rdwr.c @@ -803,7 +803,8 @@ int cachefiles_write_page(struct fscache_storage *op, struct page *page) struct cachefiles_cache *cache; mm_segment_t old_fs; struct file *file; - loff_t pos; + loff_t pos, eof; + size_t len; void *data; int ret; @@ -837,15 +838,29 @@ int cachefiles_write_page(struct fscache_storage *op, struct page *page) ret = -EIO; if (file->f_op->write) { pos = (loff_t) page->index << PAGE_SHIFT; + + /* we mustn't write more data than we have, so we have + * to beware of a partial page at EOF */ + eof = object->fscache.store_limit_l; + len = PAGE_SIZE; + if (eof & ~PAGE_MASK) { + ASSERTCMP(pos, <, eof); + if (eof - pos < PAGE_SIZE) { + _debug("cut short %llx to %llx", + pos, eof); + len = eof - pos; + ASSERTCMP(pos + len, ==, eof); + } + } + data = kmap(page); old_fs = get_fs(); set_fs(KERNEL_DS); ret = file->f_op->write( - file, (const void __user *) data, PAGE_SIZE, - &pos); + file, (const void __user *) data, len, &pos); set_fs(old_fs); kunmap(page); - if (ret != PAGE_SIZE) + if (ret != len) ret = -EIO; } fput(file); diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 907bb56c5888..5db50002f3b5 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -395,6 +395,7 @@ struct fscache_object { struct rb_node objlist_link; /* link in global object list */ #endif pgoff_t store_limit; /* current storage limit */ + loff_t store_limit_l; /* current storage limit */ }; extern const char *fscache_object_states[]; @@ -439,6 +440,7 @@ void fscache_object_init(struct fscache_object *object, object->events = object->event_mask = 0; object->flags = 0; object->store_limit = 0; + object->store_limit_l = 0; object->cache = cache; object->cookie = cookie; object->parent = NULL; @@ -491,6 +493,7 @@ static inline void fscache_object_lookup_error(struct fscache_object *object) static inline void fscache_set_store_limit(struct fscache_object *object, loff_t i_size) { + object->store_limit_l = i_size; object->store_limit = i_size >> PAGE_SHIFT; if (i_size & ~PAGE_MASK) object->store_limit++; From 5e929b33c3935ecb029b3e495356b2b8af432efa Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:55 +0000 Subject: [PATCH 543/743] CacheFiles: Handle truncate unlocking the page we're reading Handle truncate unlocking the page we're attempting to read from the backing device before the read has completed. This was causing reports like the following to occur: Pid: 4765, comm: kslowd Not tainted 2.6.30.1 #1 Call Trace: [] ? cachefiles_read_waiter+0xd9/0x147 [cachefiles] [] ? __wait_on_bit+0x60/0x6f [] ? __wake_up_common+0x3f/0x71 [] ? __wake_up+0x30/0x44 [] ? __wake_up_bit+0x28/0x2d [] ? ext3_truncate+0x4d7/0x8ed [ext3] [] ? pagevec_lookup+0x17/0x1f [] ? unmap_mapping_range+0x59/0x1ff [] ? __wake_up+0x30/0x44 [] ? vmtruncate+0xc2/0xe2 [] ? inode_setattr+0x22/0x10a [] ? ext3_setattr+0x17b/0x1e6 [ext3] [] ? notify_change+0x186/0x2c9 [] ? cachefiles_attr_changed+0x133/0x1cd [cachefiles] [] ? cachefiles_lookup_object+0xcf/0x12a [cachefiles] [] ? fscache_lookup_object+0x110/0x122 [fscache] [] ? fscache_object_slow_work_execute+0x590/0x6bc [fscache] [] ? slow_work_thread+0x285/0x43a [] ? autoremove_wake_function+0x0/0x2e [] ? slow_work_thread+0x0/0x43a [] ? kthread+0x54/0x81 [] ? child_rip+0xa/0x20 [] ? kthread+0x0/0x81 [] ? child_rip+0x0/0x20 CacheFiles: I/O Error: Readpage failed on backing file 200000000000810 FS-Cache: Cache cachefiles stopped due to I/O error Reported-by: Christian Kujau Reported-by: Takashi Iwai Reported-by: Duc Le Minh Signed-off-by: David Howells --- fs/cachefiles/rdwr.c | 99 +++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 93 insertions(+), 6 deletions(-) diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c index 5a84fd7109ad..1d8332563863 100644 --- a/fs/cachefiles/rdwr.c +++ b/fs/cachefiles/rdwr.c @@ -40,8 +40,10 @@ static int cachefiles_read_waiter(wait_queue_t *wait, unsigned mode, _debug("--- monitor %p %lx ---", page, page->flags); - if (!PageUptodate(page) && !PageError(page)) - dump_stack(); + if (!PageUptodate(page) && !PageError(page)) { + /* unlocked, not uptodate and not erronous? */ + _debug("page probably truncated"); + } /* remove from the waitqueue */ list_del(&wait->task_list); @@ -60,6 +62,84 @@ static int cachefiles_read_waiter(wait_queue_t *wait, unsigned mode, return 0; } +/* + * handle a probably truncated page + * - check to see if the page is still relevant and reissue the read if + * possible + * - return -EIO on error, -ENODATA if the page is gone, -EINPROGRESS if we + * must wait again and 0 if successful + */ +static int cachefiles_read_reissue(struct cachefiles_object *object, + struct cachefiles_one_read *monitor) +{ + struct address_space *bmapping = object->backer->d_inode->i_mapping; + struct page *backpage = monitor->back_page, *backpage2; + int ret; + + kenter("{ino=%lx},{%lx,%lx}", + object->backer->d_inode->i_ino, + backpage->index, backpage->flags); + + /* skip if the page was truncated away completely */ + if (backpage->mapping != bmapping) { + kleave(" = -ENODATA [mapping]"); + return -ENODATA; + } + + backpage2 = find_get_page(bmapping, backpage->index); + if (!backpage2) { + kleave(" = -ENODATA [gone]"); + return -ENODATA; + } + + if (backpage != backpage2) { + put_page(backpage2); + kleave(" = -ENODATA [different]"); + return -ENODATA; + } + + /* the page is still there and we already have a ref on it, so we don't + * need a second */ + put_page(backpage2); + + INIT_LIST_HEAD(&monitor->op_link); + add_page_wait_queue(backpage, &monitor->monitor); + + if (trylock_page(backpage)) { + ret = -EIO; + if (PageError(backpage)) + goto unlock_discard; + ret = 0; + if (PageUptodate(backpage)) + goto unlock_discard; + + kdebug("reissue read"); + ret = bmapping->a_ops->readpage(NULL, backpage); + if (ret < 0) + goto unlock_discard; + } + + /* but the page may have been read before the monitor was installed, so + * the monitor may miss the event - so we have to ensure that we do get + * one in such a case */ + if (trylock_page(backpage)) { + _debug("jumpstart %p {%lx}", backpage, backpage->flags); + unlock_page(backpage); + } + + /* it'll reappear on the todo list */ + kleave(" = -EINPROGRESS"); + return -EINPROGRESS; + +unlock_discard: + unlock_page(backpage); + spin_lock_irq(&object->work_lock); + list_del(&monitor->op_link); + spin_unlock_irq(&object->work_lock); + kleave(" = %d", ret); + return ret; +} + /* * copy data from backing pages to netfs pages to complete a read operation * - driven by FS-Cache's thread pool @@ -92,20 +172,26 @@ static void cachefiles_read_copier(struct fscache_operation *_op) _debug("- copy {%lu}", monitor->back_page->index); - error = -EIO; + recheck: if (PageUptodate(monitor->back_page)) { copy_highpage(monitor->netfs_page, monitor->back_page); pagevec_add(&pagevec, monitor->netfs_page); fscache_mark_pages_cached(monitor->op, &pagevec); error = 0; - } - - if (error) + } else if (!PageError(monitor->back_page)) { + /* the page has probably been truncated */ + error = cachefiles_read_reissue(object, monitor); + if (error == -EINPROGRESS) + goto next; + goto recheck; + } else { cachefiles_io_error_obj( object, "Readpage failed on backing file %lx", (unsigned long) monitor->back_page->flags); + error = -EIO; + } page_cache_release(monitor->back_page); @@ -114,6 +200,7 @@ static void cachefiles_read_copier(struct fscache_operation *_op) fscache_put_retrieval(op); kfree(monitor); + next: /* let the thread pool have some air occasionally */ max--; if (max < 0 || need_resched()) { From 6511de33c877a53b3df545bc06c29e0f272837ff Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:58 +0000 Subject: [PATCH 544/743] CacheFiles: Mark parent directory locks as I_MUTEX_PARENT to keep lockdep happy Mark parent directory locks as I_MUTEX_PARENT in the callers of cachefiles_bury_object() so that lockdep doesn't complain when that invokes vfs_unlink(): ============================================= [ INFO: possible recursive locking detected ] 2.6.32-rc6-cachefs #47 --------------------------------------------- kslowd002/3089 is trying to acquire lock: (&sb->s_type->i_mutex_key#7){+.+.+.}, at: [] vfs_unlink+0x8b/0x128 but task is already holding lock: (&sb->s_type->i_mutex_key#7){+.+.+.}, at: [] cachefiles_walk_to_object+0x1b0/0x831 [cachefiles] other info that might help us debug this: 1 lock held by kslowd002/3089: #0: (&sb->s_type->i_mutex_key#7){+.+.+.}, at: [] cachefiles_walk_to_object+0x1b0/0x831 [cachefiles] stack backtrace: Pid: 3089, comm: kslowd002 Not tainted 2.6.32-rc6-cachefs #47 Call Trace: [] __lock_acquire+0x1649/0x16e3 [] ? inode_has_perm+0x5f/0x61 [] lock_acquire+0x57/0x6d [] ? vfs_unlink+0x8b/0x128 [] mutex_lock_nested+0x54/0x292 [] ? vfs_unlink+0x8b/0x128 [] ? selinux_inode_permission+0x8e/0x90 [] ? security_inode_permission+0x1c/0x1e [] ? inode_permission+0x99/0xa5 [] vfs_unlink+0x8b/0x128 [] ? kfree+0xed/0xf9 [] cachefiles_bury_object+0xb6/0x420 [cachefiles] [] ? trace_hardirqs_on+0xd/0xf [] ? cachefiles_check_object_xattr+0x233/0x293 [cachefiles] [] cachefiles_walk_to_object+0x4ff/0x831 [cachefiles] [] ? finish_task_switch+0x0/0xb2 [] cachefiles_lookup_object+0xac/0x12a [cachefiles] [] fscache_lookup_object+0x1c7/0x214 [fscache] [] fscache_object_state_machine+0xa5/0x52d [fscache] [] fscache_object_slow_work_execute+0x5f/0xa0 [fscache] [] slow_work_execute+0x18f/0x2d1 [] slow_work_thread+0x1c5/0x308 [] ? autoremove_wake_function+0x0/0x34 [] ? slow_work_thread+0x0/0x308 [] kthread+0x7a/0x82 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? kthread+0x0/0x82 [] ? child_rip+0x0/0x20 Signed-off-by: Daivd Howells --- fs/cachefiles/namei.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c index 4ce818ae39ea..3df86952ca64 100644 --- a/fs/cachefiles/namei.c +++ b/fs/cachefiles/namei.c @@ -254,7 +254,7 @@ int cachefiles_delete_object(struct cachefiles_cache *cache, dir = dget_parent(object->dentry); - mutex_lock(&dir->d_inode->i_mutex); + mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT); ret = cachefiles_bury_object(cache, dir, object->dentry); dput(dir); @@ -307,7 +307,7 @@ lookup_again: /* search the current directory for the element name */ _debug("lookup '%s'", name); - mutex_lock(&dir->d_inode->i_mutex); + mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT); start = jiffies; next = lookup_one_len(name, dir, nlen); From d0e27b7808dc667f3015be0b6888f6d680e222c8 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:12:02 +0000 Subject: [PATCH 545/743] CacheFiles: Better showing of debugging information in active object problems Show more debugging information if cachefiles_mark_object_active() is asked to activate an active object. This may happen, for instance, if the netfs tries to register an object with the same key multiple times. The code is changed to (a) get the appropriate object lock to protect the cookie pointer whilst we dereference it, and (b) get and display the cookie key if available. Signed-off-by: David Howells --- fs/cachefiles/namei.c | 102 +++++++++++++++++++++++++++++++----------- 1 file changed, 75 insertions(+), 27 deletions(-) diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c index 3df86952ca64..00a0cda8f47a 100644 --- a/fs/cachefiles/namei.c +++ b/fs/cachefiles/namei.c @@ -27,6 +27,76 @@ static int cachefiles_wait_bit(void *flags) return 0; } +#define CACHEFILES_KEYBUF_SIZE 512 + +/* + * dump debugging info about an object + */ +static noinline +void __cachefiles_printk_object(struct cachefiles_object *object, + const char *prefix, + u8 *keybuf) +{ + struct fscache_cookie *cookie; + unsigned keylen, loop; + + printk(KERN_ERR "%sobject: OBJ%x\n", + prefix, object->fscache.debug_id); + printk(KERN_ERR "%sobjstate=%s fl=%lx swfl=%lx ev=%lx[%lx]\n", + prefix, fscache_object_states[object->fscache.state], + object->fscache.flags, object->fscache.work.flags, + object->fscache.events, + object->fscache.event_mask & FSCACHE_OBJECT_EVENTS_MASK); + printk(KERN_ERR "%sops=%u inp=%u exc=%u\n", + prefix, object->fscache.n_ops, object->fscache.n_in_progress, + object->fscache.n_exclusive); + printk(KERN_ERR "%sparent=%p\n", + prefix, object->fscache.parent); + + spin_lock(&object->fscache.lock); + cookie = object->fscache.cookie; + if (cookie) { + printk(KERN_ERR "%scookie=%p [pr=%p nd=%p fl=%lx]\n", + prefix, + object->fscache.cookie, + object->fscache.cookie->parent, + object->fscache.cookie->netfs_data, + object->fscache.cookie->flags); + if (keybuf) + keylen = cookie->def->get_key(cookie->netfs_data, keybuf, + CACHEFILES_KEYBUF_SIZE); + else + keylen = 0; + } else { + printk(KERN_ERR "%scookie=NULL\n", prefix); + keylen = 0; + } + spin_unlock(&object->fscache.lock); + + if (keylen) { + printk(KERN_ERR "%skey=[%u] '", prefix, keylen); + for (loop = 0; loop < keylen; loop++) + printk("%02x", keybuf[loop]); + printk("'\n"); + } +} + +/* + * dump debugging info about a pair of objects + */ +static noinline void cachefiles_printk_object(struct cachefiles_object *object, + struct cachefiles_object *xobject) +{ + u8 *keybuf; + + keybuf = kmalloc(CACHEFILES_KEYBUF_SIZE, GFP_NOIO); + if (object) + __cachefiles_printk_object(object, "", keybuf); + if (xobject) + __cachefiles_printk_object(xobject, "x", keybuf); + kfree(keybuf); +} + /* * record the fact that an object is now active */ @@ -42,8 +112,11 @@ static void cachefiles_mark_object_active(struct cachefiles_cache *cache, try_again: write_lock(&cache->active_lock); - if (test_and_set_bit(CACHEFILES_OBJECT_ACTIVE, &object->flags)) + if (test_and_set_bit(CACHEFILES_OBJECT_ACTIVE, &object->flags)) { + printk(KERN_ERR "CacheFiles: Error: Object already active\n"); + cachefiles_printk_object(object, NULL); BUG(); + } dentry = object->dentry; _p = &cache->active_nodes.rb_node; @@ -76,32 +149,7 @@ wait_for_old_object: printk(KERN_ERR "\n"); printk(KERN_ERR "CacheFiles: Error:" " Unexpected object collision\n"); - printk(KERN_ERR "xobject: OBJ%x\n", - xobject->fscache.debug_id); - printk(KERN_ERR "xobjstate=%s\n", - fscache_object_states[xobject->fscache.state]); - printk(KERN_ERR "xobjflags=%lx\n", xobject->fscache.flags); - printk(KERN_ERR "xobjevent=%lx [%lx]\n", - xobject->fscache.events, xobject->fscache.event_mask); - printk(KERN_ERR "xops=%u inp=%u exc=%u\n", - xobject->fscache.n_ops, xobject->fscache.n_in_progress, - xobject->fscache.n_exclusive); - printk(KERN_ERR "xcookie=%p [pr=%p nd=%p fl=%lx]\n", - xobject->fscache.cookie, - xobject->fscache.cookie->parent, - xobject->fscache.cookie->netfs_data, - xobject->fscache.cookie->flags); - printk(KERN_ERR "xparent=%p\n", - xobject->fscache.parent); - printk(KERN_ERR "object: OBJ%x\n", - object->fscache.debug_id); - printk(KERN_ERR "cookie=%p [pr=%p nd=%p fl=%lx]\n", - object->fscache.cookie, - object->fscache.cookie->parent, - object->fscache.cookie->netfs_data, - object->fscache.cookie->flags); - printk(KERN_ERR "parent=%p\n", - object->fscache.parent); + cachefiles_printk_object(object, xobject); BUG(); } atomic_inc(&xobject->usage); From fee096deb4f33897937b974cb2c5168bab7935be Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:12:05 +0000 Subject: [PATCH 546/743] CacheFiles: Catch an overly long wait for an old active object Catch an overly long wait for an old, dying active object when we want to replace it with a new one. The probability is that all the slow-work threads are hogged, and the delete can't get a look in. What we do instead is: (1) if there's nothing in the slow work queue, we sleep until either the dying object has finished dying or there is something in the slow work queue behind which we can queue our object. (2) if there is something in the slow work queue, we return ETIMEDOUT to fscache_lookup_object(), which then puts us back on the slow work queue, presumably behind the deletion that we're blocked by. We are then deferred for a while until we work our way back through the queue - without blocking a slow-work thread unnecessarily. A backtrace similar to the following may appear in the log without this patch: INFO: task kslowd004:5711 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kslowd004 D 0000000000000000 0 5711 2 0x00000080 ffff88000340bb80 0000000000000046 ffff88002550d000 0000000000000000 ffff88002550d000 0000000000000007 ffff88000340bfd8 ffff88002550d2a8 000000000000ddf0 00000000000118c0 00000000000118c0 ffff88002550d2a8 Call Trace: [] ? trace_hardirqs_on+0xd/0xf [] ? cachefiles_wait_bit+0x0/0xd [cachefiles] [] cachefiles_wait_bit+0x9/0xd [cachefiles] [] __wait_on_bit+0x43/0x76 [] ? ext3_xattr_get+0x1ec/0x270 [] out_of_line_wait_on_bit+0x69/0x74 [] ? cachefiles_wait_bit+0x0/0xd [cachefiles] [] ? wake_bit_function+0x0/0x2e [] cachefiles_mark_object_active+0x203/0x23b [cachefiles] [] cachefiles_walk_to_object+0x558/0x827 [cachefiles] [] cachefiles_lookup_object+0xac/0x12a [cachefiles] [] fscache_lookup_object+0x1c7/0x214 [fscache] [] fscache_object_state_machine+0xa5/0x52d [fscache] [] fscache_object_slow_work_execute+0x5f/0xa0 [fscache] [] slow_work_execute+0x18f/0x2d1 [] slow_work_thread+0x1c5/0x308 [] ? autoremove_wake_function+0x0/0x34 [] ? slow_work_thread+0x0/0x308 [] kthread+0x7a/0x82 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? kthread+0x0/0x82 [] ? child_rip+0x0/0x20 1 lock held by kslowd004/5711: #0: (&sb->s_type->i_mutex_key#7/1){+.+.+.}, at: [] cachefiles_walk_to_object+0x1b3/0x827 [cachefiles] Signed-off-by: David Howells --- Documentation/filesystems/caching/fscache.txt | 1 + fs/cachefiles/interface.c | 6 +- fs/cachefiles/namei.c | 87 +++++++++++++++---- fs/fscache/internal.h | 1 + fs/fscache/object.c | 10 ++- fs/fscache/stats.c | 4 +- include/linux/fscache-cache.h | 6 +- 7 files changed, 90 insertions(+), 25 deletions(-) diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt index 3c23411956bb..a91e2e2095b0 100644 --- a/Documentation/filesystems/caching/fscache.txt +++ b/Documentation/filesystems/caching/fscache.txt @@ -235,6 +235,7 @@ proc files. neg=N Number of negative lookups made pos=N Number of positive lookups made crt=N Number of objects created by lookup + tmo=N Number of lookups timed out and requeued Updates n=N Number of update cookie requests seen nul=N Number of upd reqs given a NULL parent run=N Number of upd reqs granted CPU time diff --git a/fs/cachefiles/interface.c b/fs/cachefiles/interface.c index 8e67abf05985..9d3c426044ae 100644 --- a/fs/cachefiles/interface.c +++ b/fs/cachefiles/interface.c @@ -114,8 +114,9 @@ nomem_lookup_data: /* * attempt to look up the nominated node in this cache + * - return -ETIMEDOUT to be scheduled again */ -static void cachefiles_lookup_object(struct fscache_object *_object) +static int cachefiles_lookup_object(struct fscache_object *_object) { struct cachefiles_lookup_data *lookup_data; struct cachefiles_object *parent, *object; @@ -145,13 +146,14 @@ static void cachefiles_lookup_object(struct fscache_object *_object) object->fscache.cookie->def->type != FSCACHE_COOKIE_TYPE_INDEX) cachefiles_attr_changed(&object->fscache); - if (ret < 0) { + if (ret < 0 && ret != -ETIMEDOUT) { printk(KERN_WARNING "CacheFiles: Lookup failed error %d\n", ret); fscache_object_lookup_error(&object->fscache); } _leave(" [%d]", ret); + return ret; } /* diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c index 00a0cda8f47a..14ac4806e291 100644 --- a/fs/cachefiles/namei.c +++ b/fs/cachefiles/namei.c @@ -21,12 +21,6 @@ #include #include "internal.h" -static int cachefiles_wait_bit(void *flags) -{ - schedule(); - return 0; -} - #define CACHEFILES_KEYBUF_SIZE 512 /* @@ -100,8 +94,8 @@ static noinline void cachefiles_printk_object(struct cachefiles_object *object, /* * record the fact that an object is now active */ -static void cachefiles_mark_object_active(struct cachefiles_cache *cache, - struct cachefiles_object *object) +static int cachefiles_mark_object_active(struct cachefiles_cache *cache, + struct cachefiles_object *object) { struct cachefiles_object *xobject; struct rb_node **_p, *_parent = NULL; @@ -139,8 +133,8 @@ try_again: rb_insert_color(&object->active_node, &cache->active_nodes); write_unlock(&cache->active_lock); - _leave(""); - return; + _leave(" = 0"); + return 0; /* an old object from a previous incarnation is hogging the slot - we * need to wait for it to be destroyed */ @@ -155,13 +149,64 @@ wait_for_old_object: atomic_inc(&xobject->usage); write_unlock(&cache->active_lock); - _debug(">>> wait"); - wait_on_bit(&xobject->flags, CACHEFILES_OBJECT_ACTIVE, - cachefiles_wait_bit, TASK_UNINTERRUPTIBLE); - _debug("<<< waited"); + if (test_bit(CACHEFILES_OBJECT_ACTIVE, &xobject->flags)) { + wait_queue_head_t *wq; + + signed long timeout = 60 * HZ; + wait_queue_t wait; + bool requeue; + + /* if the object we're waiting for is queued for processing, + * then just put ourselves on the queue behind it */ + if (slow_work_is_queued(&xobject->fscache.work)) { + _debug("queue OBJ%x behind OBJ%x immediately", + object->fscache.debug_id, + xobject->fscache.debug_id); + goto requeue; + } + + /* otherwise we sleep until either the object we're waiting for + * is done, or the slow-work facility wants the thread back to + * do other work */ + wq = bit_waitqueue(&xobject->flags, CACHEFILES_OBJECT_ACTIVE); + init_wait(&wait); + requeue = false; + do { + prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE); + if (!test_bit(CACHEFILES_OBJECT_ACTIVE, &xobject->flags)) + break; + requeue = slow_work_sleep_till_thread_needed( + &object->fscache.work, &timeout); + } while (timeout > 0 && !requeue); + finish_wait(wq, &wait); + + if (requeue && + test_bit(CACHEFILES_OBJECT_ACTIVE, &xobject->flags)) { + _debug("queue OBJ%x behind OBJ%x after wait", + object->fscache.debug_id, + xobject->fscache.debug_id); + goto requeue; + } + + if (timeout <= 0) { + printk(KERN_ERR "\n"); + printk(KERN_ERR "CacheFiles: Error: Overlong" + " wait for old active object to go away\n"); + cachefiles_printk_object(object, xobject); + goto requeue; + } + } + + ASSERT(!test_bit(CACHEFILES_OBJECT_ACTIVE, &xobject->flags)); cache->cache.ops->put_object(&xobject->fscache); goto try_again; + +requeue: + clear_bit(CACHEFILES_OBJECT_ACTIVE, &object->flags); + cache->cache.ops->put_object(&xobject->fscache); + _leave(" = -ETIMEDOUT"); + return -ETIMEDOUT; } /* @@ -466,12 +511,15 @@ lookup_again: } /* note that we're now using this object */ - cachefiles_mark_object_active(cache, object); + ret = cachefiles_mark_object_active(cache, object); mutex_unlock(&dir->d_inode->i_mutex); dput(dir); dir = NULL; + if (ret == -ETIMEDOUT) + goto mark_active_timed_out; + _debug("=== OBTAINED_OBJECT ==="); if (object->new) { @@ -515,6 +563,10 @@ create_error: cachefiles_io_error(cache, "Create/mkdir failed"); goto error; +mark_active_timed_out: + _debug("mark active timed out"); + goto release_dentry; + check_error: _debug("check error %d", ret); write_lock(&cache->active_lock); @@ -522,7 +574,7 @@ check_error: clear_bit(CACHEFILES_OBJECT_ACTIVE, &object->flags); wake_up_bit(&object->flags, CACHEFILES_OBJECT_ACTIVE); write_unlock(&cache->active_lock); - +release_dentry: dput(object->dentry); object->dentry = NULL; goto error_out; @@ -543,9 +595,6 @@ error: error_out2: dput(dir); error_out: - if (ret == -ENOSPC) - ret = -ENOBUFS; - _leave(" = error %d", -ret); return ret; } diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index 5b49a373689b..0ca2566e038c 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -215,6 +215,7 @@ extern atomic_t fscache_n_object_no_alloc; extern atomic_t fscache_n_object_lookups; extern atomic_t fscache_n_object_lookups_negative; extern atomic_t fscache_n_object_lookups_positive; +extern atomic_t fscache_n_object_lookups_timed_out; extern atomic_t fscache_n_object_created; extern atomic_t fscache_n_object_avail; extern atomic_t fscache_n_object_dead; diff --git a/fs/fscache/object.c b/fs/fscache/object.c index f3f952cf887e..e513ac599c8e 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -468,6 +468,7 @@ static void fscache_lookup_object(struct fscache_object *object) { struct fscache_cookie *cookie = object->cookie; struct fscache_object *parent; + int ret; _enter(""); @@ -493,12 +494,19 @@ static void fscache_lookup_object(struct fscache_object *object) fscache_stat(&fscache_n_object_lookups); fscache_stat(&fscache_n_cop_lookup_object); - object->cache->ops->lookup_object(object); + ret = object->cache->ops->lookup_object(object); fscache_stat_d(&fscache_n_cop_lookup_object); if (test_bit(FSCACHE_OBJECT_EV_ERROR, &object->events)) set_bit(FSCACHE_COOKIE_UNAVAILABLE, &cookie->flags); + if (ret == -ETIMEDOUT) { + /* probably stuck behind another object, so move this one to + * the back of the queue */ + fscache_stat(&fscache_n_object_lookups_timed_out); + set_bit(FSCACHE_OBJECT_EV_REQUEUE, &object->events); + } + _leave(""); } diff --git a/fs/fscache/stats.c b/fs/fscache/stats.c index 05f77caf4a2d..46435f3aae68 100644 --- a/fs/fscache/stats.c +++ b/fs/fscache/stats.c @@ -98,6 +98,7 @@ atomic_t fscache_n_object_no_alloc; atomic_t fscache_n_object_lookups; atomic_t fscache_n_object_lookups_negative; atomic_t fscache_n_object_lookups_positive; +atomic_t fscache_n_object_lookups_timed_out; atomic_t fscache_n_object_created; atomic_t fscache_n_object_avail; atomic_t fscache_n_object_dead; @@ -160,10 +161,11 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_acquires_nobufs), atomic_read(&fscache_n_acquires_oom)); - seq_printf(m, "Lookups: n=%u neg=%u pos=%u crt=%u\n", + seq_printf(m, "Lookups: n=%u neg=%u pos=%u crt=%u tmo=%u\n", atomic_read(&fscache_n_object_lookups), atomic_read(&fscache_n_object_lookups_negative), atomic_read(&fscache_n_object_lookups_positive), + atomic_read(&fscache_n_object_lookups_timed_out), atomic_read(&fscache_n_object_created)); seq_printf(m, "Updates: n=%u nul=%u run=%u\n", diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 5db50002f3b5..7be0c6fbe880 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -234,8 +234,10 @@ struct fscache_cache_ops { struct fscache_object *(*alloc_object)(struct fscache_cache *cache, struct fscache_cookie *cookie); - /* look up the object for a cookie */ - void (*lookup_object)(struct fscache_object *object); + /* look up the object for a cookie + * - return -ETIMEDOUT to be requeued + */ + int (*lookup_object)(struct fscache_object *object); /* finished looking up */ void (*lookup_complete)(struct fscache_object *object); From 14e69647c868459bcb910f771851ca7c699efd21 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:12:08 +0000 Subject: [PATCH 547/743] CacheFiles: Don't log lookup/create failing with ENOBUFS Don't log the CacheFiles lookup/create object routined failing with ENOBUFS as under high memory load or high cache load they can do this quite a lot. This error simply means that the requested object cannot be created on disk due to lack of space, or due to failure of the backing filesystem to find sufficient resources. Signed-off-by: David Howells --- fs/cachefiles/interface.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/cachefiles/interface.c b/fs/cachefiles/interface.c index 9d3c426044ae..27089311fbea 100644 --- a/fs/cachefiles/interface.c +++ b/fs/cachefiles/interface.c @@ -147,8 +147,9 @@ static int cachefiles_lookup_object(struct fscache_object *_object) cachefiles_attr_changed(&object->fscache); if (ret < 0 && ret != -ETIMEDOUT) { - printk(KERN_WARNING "CacheFiles: Lookup failed error %d\n", - ret); + if (ret != -ENOBUFS) + printk(KERN_WARNING + "CacheFiles: Lookup failed error %d\n", ret); fscache_object_lookup_error(&object->fscache); } From 56cf54831fd1be105e89a9df899e3b22442da180 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 19 Nov 2009 01:28:10 +0000 Subject: [PATCH 548/743] ieee802154: dont leak skbs in ieee802154_fake_xmit() ieee802154_fake_xmit() should free skbs since it returns NETDEV_TX_OK Signed-off-by: Eric Dumazet Acked-by: Dmitry Eremin-Solenikov Signed-off-by: David S. Miller --- drivers/ieee802154/fakehard.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/ieee802154/fakehard.c b/drivers/ieee802154/fakehard.c index 96a2959ce877..7c544f7c74c4 100644 --- a/drivers/ieee802154/fakehard.c +++ b/drivers/ieee802154/fakehard.c @@ -260,15 +260,12 @@ static int ieee802154_fake_close(struct net_device *dev) static netdev_tx_t ieee802154_fake_xmit(struct sk_buff *skb, struct net_device *dev) { - skb->iif = dev->ifindex; - skb->dev = dev; dev->stats.tx_packets++; dev->stats.tx_bytes += skb->len; - dev->trans_start = jiffies; - /* FIXME: do hardware work here ... */ + dev_kfree_skb(skb); return NETDEV_TX_OK; } From 2b1c8b0f925c3f5943cf95d263d72927baae88e7 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 18 Nov 2009 07:09:39 +0000 Subject: [PATCH 549/743] veth: Fix veth_get_stats() veth_get_stats() can be called in parallel on several cpus. It's better to not reset dev->stats as it could give wrong result on one cpu. Use temporary variables, then store the final results. Also, we should loop on every possible cpus, not only online cpus, or cpu hotplug can suddenly give wrong veth stats. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/veth.c | 33 +++++++++++++++------------------ 1 file changed, 15 insertions(+), 18 deletions(-) diff --git a/drivers/net/veth.c b/drivers/net/veth.c index ade5b344f75d..52af5017c46b 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -210,32 +210,29 @@ rx_drop: static struct net_device_stats *veth_get_stats(struct net_device *dev) { struct veth_priv *priv; - struct net_device_stats *dev_stats; int cpu; - struct veth_net_stats *stats; + struct veth_net_stats *stats, total = {0}; priv = netdev_priv(dev); - dev_stats = &dev->stats; - dev_stats->rx_packets = 0; - dev_stats->tx_packets = 0; - dev_stats->rx_bytes = 0; - dev_stats->tx_bytes = 0; - dev_stats->tx_dropped = 0; - dev_stats->rx_dropped = 0; - - for_each_online_cpu(cpu) { + for_each_possible_cpu(cpu) { stats = per_cpu_ptr(priv->stats, cpu); - dev_stats->rx_packets += stats->rx_packets; - dev_stats->tx_packets += stats->tx_packets; - dev_stats->rx_bytes += stats->rx_bytes; - dev_stats->tx_bytes += stats->tx_bytes; - dev_stats->tx_dropped += stats->tx_dropped; - dev_stats->rx_dropped += stats->rx_dropped; + total.rx_packets += stats->rx_packets; + total.tx_packets += stats->tx_packets; + total.rx_bytes += stats->rx_bytes; + total.tx_bytes += stats->tx_bytes; + total.tx_dropped += stats->tx_dropped; + total.rx_dropped += stats->rx_dropped; } + dev->stats.rx_packets = total.rx_packets; + dev->stats.tx_packets = total.tx_packets; + dev->stats.rx_bytes = total.rx_bytes; + dev->stats.tx_bytes = total.tx_bytes; + dev->stats.tx_dropped = total.tx_dropped; + dev->stats.rx_dropped = total.rx_dropped; - return dev_stats; + return &dev->stats; } static int veth_open(struct net_device *dev) From d667b9cfd09a2ca61f74a9edc73d08d2ad0d14da Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 19 Nov 2009 04:59:03 +0000 Subject: [PATCH 550/743] netfilter: xt_osf: fix xt_osf_remove_callback() return value Return a negative error value. Signed-off-by: Roel Kluin Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/xt_osf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_osf.c b/net/netfilter/xt_osf.c index 63e190504656..4d1a41bbd5d7 100644 --- a/net/netfilter/xt_osf.c +++ b/net/netfilter/xt_osf.c @@ -118,7 +118,7 @@ static int xt_osf_remove_callback(struct sock *ctnl, struct sk_buff *skb, { struct xt_osf_user_finger *f; struct xt_osf_finger *sf; - int err = ENOENT; + int err = -ENOENT; if (!osf_attrs[OSF_ATTR_FINGER]) return -EINVAL; From 6440fe059ee8b49b548c8c2c1447530075d07e10 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 19 Nov 2009 04:59:05 +0000 Subject: [PATCH 551/743] netfilter: nf_log: fix sleeping function called from invalid context in seq_show() [ 171.925285] BUG: sleeping function called from invalid context at kernel/mutex.c:280 [ 171.925296] in_atomic(): 1, irqs_disabled(): 0, pid: 671, name: grep [ 171.925306] 2 locks held by grep/671: [ 171.925312] #0: (&p->lock){+.+.+.}, at: [] seq_read+0x25/0x36c [ 171.925340] #1: (rcu_read_lock){.+.+..}, at: [] seq_start+0x0/0x44 [ 171.925372] Pid: 671, comm: grep Not tainted 2.6.31.6-4-netbook #3 [ 171.925380] Call Trace: [ 171.925398] [] ? __debug_show_held_locks+0x1e/0x20 [ 171.925414] [] __might_sleep+0xfb/0x102 [ 171.925430] [] mutex_lock_nested+0x1c/0x2ad [ 171.925444] [] seq_show+0x74/0x127 [ 171.925456] [] seq_read+0x1b4/0x36c [ 171.925469] [] ? seq_read+0x0/0x36c [ 171.925483] [] proc_reg_read+0x60/0x74 [ 171.925496] [] ? proc_reg_read+0x0/0x74 [ 171.925510] [] vfs_read+0x87/0x110 [ 171.925523] [] sys_read+0x3b/0x60 [ 171.925538] [] syscall_call+0x7/0xb Fix it by replacing RCU with nf_log_mutex. Reported-by: "Yin, Kangkai" Signed-off-by: Wu Fengguang Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_log.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index c93494fef8ef..d65d3481919c 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -128,9 +128,8 @@ EXPORT_SYMBOL(nf_log_packet); #ifdef CONFIG_PROC_FS static void *seq_start(struct seq_file *seq, loff_t *pos) - __acquires(RCU) { - rcu_read_lock(); + mutex_lock(&nf_log_mutex); if (*pos >= ARRAY_SIZE(nf_loggers)) return NULL; @@ -149,9 +148,8 @@ static void *seq_next(struct seq_file *s, void *v, loff_t *pos) } static void seq_stop(struct seq_file *s, void *v) - __releases(RCU) { - rcu_read_unlock(); + mutex_unlock(&nf_log_mutex); } static int seq_show(struct seq_file *s, void *v) @@ -161,7 +159,7 @@ static int seq_show(struct seq_file *s, void *v) struct nf_logger *t; int ret; - logger = rcu_dereference(nf_loggers[*pos]); + logger = nf_loggers[*pos]; if (!logger) ret = seq_printf(s, "%2lld NONE (", *pos); @@ -171,22 +169,16 @@ static int seq_show(struct seq_file *s, void *v) if (ret < 0) return ret; - mutex_lock(&nf_log_mutex); list_for_each_entry(t, &nf_loggers_l[*pos], list[*pos]) { ret = seq_printf(s, "%s", t->name); - if (ret < 0) { - mutex_unlock(&nf_log_mutex); + if (ret < 0) return ret; - } if (&t->list[*pos] != nf_loggers_l[*pos].prev) { ret = seq_printf(s, ","); - if (ret < 0) { - mutex_unlock(&nf_log_mutex); + if (ret < 0) return ret; - } } } - mutex_unlock(&nf_log_mutex); return seq_printf(s, ")\n"); } From 5854d9c8d18359b1fc2f23c0ef2d51dd53281bd6 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 19 Nov 2009 02:18:44 +0000 Subject: [PATCH 552/743] Fix handling of the HP/Acer 'DMAR at zero' BIOS error for machines with <4GiB RAM. Commit 86cf898e1d0fca245173980e3897580db38569a8 ("intel-iommu: Check for 'DMAR at zero' BIOS error earlier.") was supposed to work by pretending not to detect an IOMMU if it was actually being reported by the BIOS at physical address zero. However, the intel_iommu_init() function is called unconditionally, as are the corresponding functions for other IOMMU hardware. So the patch only worked if you have RAM above the 4GiB boundary. It caused swiotlb to be initialised when no IOMMU was detected during early boot, and thus the later IOMMU init would refuse to run. But if you have less RAM than that, swiotlb wouldn't get set up and the IOMMU _would_ still end up being initialised, even though we never claimed to detect it. This patch also sets the dmar_disabled flag when the error is detected during the initial detection phase -- so that the later call to intel_iommu_init() will return without doing anything, regardless of whether swiotlb is used or not. Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- drivers/pci/dmar.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index e5f8fc164fd3..b952ebc7a78b 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -609,6 +609,9 @@ int __init check_zero_address(void) dmi_get_system_info(DMI_BIOS_VENDOR), dmi_get_system_info(DMI_BIOS_VERSION), dmi_get_system_info(DMI_PRODUCT_VERSION)); +#ifdef CONFIG_DMAR + dmar_disabled = 1; +#endif return 0; } break; From 308efab5e231d1510cd35931d87629bf5171caae Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 19 Nov 2009 13:30:36 +0000 Subject: [PATCH 553/743] vt: Fix use of "new" in a struct field As this struct is exposed to user space and the API was added for this release it's a bit of a pain for the C++ world and we still have time to fix it. Rename the fields before we end up with that pain in an actual release. Signed-off-by: Alan Cox Reported-by: Olivier Goffart Signed-off-by: Linus Torvalds --- drivers/char/vt_ioctl.c | 6 +++--- include/linux/vt.h | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index ed86d3bf249a..6aa10284104a 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -103,8 +103,8 @@ void vt_event_post(unsigned int event, unsigned int old, unsigned int new) ve->event.event = event; /* kernel view is consoles 0..n-1, user space view is console 1..n with 0 meaning current, so we must bias */ - ve->event.old = old + 1; - ve->event.new = new + 1; + ve->event.oldev = old + 1; + ve->event.newev = new + 1; wake = 1; ve->done = 1; } @@ -186,7 +186,7 @@ int vt_waitactive(int n) vt_event_wait(&vw); if (vw.done == 0) return -EINTR; - } while (vw.event.new != n); + } while (vw.event.newev != n); return 0; } diff --git a/include/linux/vt.h b/include/linux/vt.h index 7afca0d72139..7ffa11f06232 100644 --- a/include/linux/vt.h +++ b/include/linux/vt.h @@ -70,8 +70,8 @@ struct vt_event { #define VT_EVENT_UNBLANK 0x0004 /* Screen unblank */ #define VT_EVENT_RESIZE 0x0008 /* Resize display */ #define VT_MAX_EVENT 0x000F - unsigned int old; /* Old console */ - unsigned int new; /* New console (if changing) */ + unsigned int oldev; /* Old console */ + unsigned int newev; /* New console (if changing) */ unsigned int pad[4]; /* Padding for expansion */ }; From 648f4e3e50c4793d9dbf9a09afa193631f76fa26 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 19 Nov 2009 14:32:38 -0800 Subject: [PATCH 554/743] Linux 2.6.32-rc8 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index aa3e13a7e353..ad8260102f64 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 32 -EXTRAVERSION = -rc7 +EXTRAVERSION = -rc8 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* From a0a74d1ee2e38eb936a0437330da3a2fbc12b54e Mon Sep 17 00:00:00 2001 From: Jiang Yutang Date: Fri, 16 Oct 2009 20:44:36 +0400 Subject: [PATCH 555/743] sata_fsl: Split hard and soft reset Split sata_fsl_softreset() into hard and soft resets to make error-handling more efficient & device and PMP detection more reliable. Also includes fix for PMP support, driver tested with Sil3726, Sil4726 & Exar PMP controllers. [AV: Also fixes resuming from deep sleep on MPC8315 CPUs] Signed-off-by: Jiang Yutang Signed-off-by: Anton Vorontsov Signed-off-by: Jeff Garzik --- drivers/ata/sata_fsl.c | 84 ++++++++++++++++++++++-------------------- 1 file changed, 44 insertions(+), 40 deletions(-) diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index d344db42a002..172b57e6543f 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -707,34 +707,17 @@ static unsigned int sata_fsl_dev_classify(struct ata_port *ap) return ata_dev_classify(&tf); } -static int sata_fsl_prereset(struct ata_link *link, unsigned long deadline) -{ - /* FIXME: Never skip softreset, sata_fsl_softreset() is - * combination of soft and hard resets. sata_fsl_softreset() - * needs to be splitted into soft and hard resets. - */ - return 0; -} - -static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, +static int sata_fsl_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { struct ata_port *ap = link->ap; - struct sata_fsl_port_priv *pp = ap->private_data; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; - int pmp = sata_srst_pmp(link); u32 temp; - struct ata_taskfile tf; - u8 *cfis; - u32 Serror; int i = 0; unsigned long start_jiffies; - DPRINTK("in xx_softreset\n"); - - if (pmp != SATA_PMP_CTRL_PORT) - goto issue_srst; + DPRINTK("in xx_hardreset\n"); try_offline_again: /* @@ -749,7 +732,7 @@ try_offline_again: if (temp & ONLINE) { ata_port_printk(ap, KERN_ERR, - "Softreset failed, not off-lined %d\n", i); + "Hardreset failed, not off-lined %d\n", i); /* * Try to offline controller atleast twice @@ -761,7 +744,7 @@ try_offline_again: goto try_offline_again; } - DPRINTK("softreset, controller off-lined\n"); + DPRINTK("hardreset, controller off-lined\n"); VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); @@ -786,11 +769,11 @@ try_offline_again: if (!(temp & ONLINE)) { ata_port_printk(ap, KERN_ERR, - "Softreset failed, not on-lined\n"); + "Hardreset failed, not on-lined\n"); goto err; } - DPRINTK("softreset, controller off-lined & on-lined\n"); + DPRINTK("hardreset, controller off-lined & on-lined\n"); VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); @@ -806,7 +789,7 @@ try_offline_again: "No Device OR PHYRDY change,Hstatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); *class = ATA_DEV_NONE; - goto out; + return 0; } /* @@ -819,11 +802,44 @@ try_offline_again: if ((temp & 0xFF) != 0x18) { ata_port_printk(ap, KERN_WARNING, "No Signature Update\n"); *class = ATA_DEV_NONE; - goto out; + goto do_followup_srst; } else { ata_port_printk(ap, KERN_INFO, "Signature Update detected @ %d msecs\n", jiffies_to_msecs(jiffies - start_jiffies)); + *class = sata_fsl_dev_classify(ap); + return 0; + } + +do_followup_srst: + /* + * request libATA to perform follow-up softreset + */ + return -EAGAIN; + +err: + return -EIO; +} + +static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct sata_fsl_port_priv *pp = ap->private_data; + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + int pmp = sata_srst_pmp(link); + u32 temp; + struct ata_taskfile tf; + u8 *cfis; + u32 Serror; + + DPRINTK("in xx_softreset\n"); + + if (ata_link_offline(link)) { + DPRINTK("PHY reports no device\n"); + *class = ATA_DEV_NONE; + return 0; } /* @@ -834,7 +850,6 @@ try_offline_again: * reached here, we can send a command to the target device */ -issue_srst: DPRINTK("Sending SRST/device reset\n"); ata_tf_init(link->device, &tf); @@ -860,6 +875,8 @@ issue_srst: ioread32(CA + hcr_base), ioread32(CC + hcr_base)); iowrite32(0xFFFF, CC + hcr_base); + if (pmp != SATA_PMP_CTRL_PORT) + iowrite32(pmp, CQPMP + hcr_base); iowrite32(1, CQ + hcr_base); temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000); @@ -926,7 +943,6 @@ issue_srst: VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE)); } -out: return 0; err: @@ -988,18 +1004,6 @@ static void sata_fsl_error_intr(struct ata_port *ap) ehi->err_mask |= AC_ERR_ATA_BUS; ehi->action |= ATA_EH_SOFTRESET; - /* - * Ignore serror in case of fatal errors as we always want - * to do a soft-reset of the FSL SATA controller. Analyzing - * serror may cause libata to schedule a hard-reset action, - * and hard-reset currently does not do controller - * offline/online, causing command timeouts and leads to an - * un-recoverable state, hence make libATA ignore - * autopsy in case of fatal errors. - */ - - ehi->flags |= ATA_EHI_NO_AUTOPSY; - freeze = 1; } @@ -1267,8 +1271,8 @@ static struct ata_port_operations sata_fsl_ops = { .freeze = sata_fsl_freeze, .thaw = sata_fsl_thaw, - .prereset = sata_fsl_prereset, .softreset = sata_fsl_softreset, + .hardreset = sata_fsl_hardreset, .pmp_softreset = sata_fsl_softreset, .error_handler = sata_fsl_error_handler, .post_internal_cmd = sata_fsl_post_internal_cmd, From 228c4f5cfbf1cda411d9aa7204a612a63c89b1e8 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 19 Nov 2009 17:07:10 -0700 Subject: [PATCH 556/743] ioat3: dca and raid operations are incompatible RAID operations cause a system hang on platforms with DCA (Direct-Cache-Access) enabled. So turn off RAID capabilities in this case. Signed-off-by: Dan Williams --- drivers/dma/ioat/dca.c | 2 +- drivers/dma/ioat/dma_v3.c | 6 ++++++ drivers/dma/ioat/hw.h | 2 ++ 3 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/dma/ioat/dca.c b/drivers/dma/ioat/dca.c index 14f0a782df44..abd9038e06b1 100644 --- a/drivers/dma/ioat/dca.c +++ b/drivers/dma/ioat/dca.c @@ -103,7 +103,7 @@ static int dca_enabled_in_bios(struct pci_dev *pdev) return res; } -static int system_has_dca_enabled(struct pci_dev *pdev) +int system_has_dca_enabled(struct pci_dev *pdev) { if (boot_cpu_has(X86_FEATURE_DCA)) return dca_enabled_in_bios(pdev); diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 35d1e33afd5b..4f305f61f878 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -1117,6 +1117,7 @@ static int __devinit ioat3_dma_self_test(struct ioatdma_device *device) int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) { struct pci_dev *pdev = device->pdev; + int dca_en = system_has_dca_enabled(pdev); struct dma_device *dma; struct dma_chan *c; struct ioat_chan_common *chan; @@ -1137,6 +1138,11 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) dma->device_prep_dma_interrupt = ioat3_prep_interrupt_lock; cap = readl(device->reg_base + IOAT_DMA_CAP_OFFSET); + + /* dca is incompatible with raid operations */ + if (dca_en && (cap & (IOAT_CAP_XOR|IOAT_CAP_PQ))) + cap &= ~(IOAT_CAP_XOR|IOAT_CAP_PQ); + if (cap & IOAT_CAP_XOR) { is_raid_device = true; dma->max_xor = 8; diff --git a/drivers/dma/ioat/hw.h b/drivers/dma/ioat/hw.h index 99afb12bd409..60e675455b6a 100644 --- a/drivers/dma/ioat/hw.h +++ b/drivers/dma/ioat/hw.h @@ -39,6 +39,8 @@ #define IOAT_VER_3_0 0x30 /* Version 3.0 */ #define IOAT_VER_3_2 0x32 /* Version 3.2 */ +int system_has_dca_enabled(struct pci_dev *pdev); + struct ioat_dma_descriptor { uint32_t size; union { From 6f82b83b7a56bc6e9dd6d7b93531dde6027c5309 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 19 Nov 2009 17:07:57 -0700 Subject: [PATCH 557/743] ioat2,3: disable asynchronous error notifications Error interrupts and error completions may cause channel hangs, so poll the channel status register after a timeout. Signed-off-by: Dan Williams --- drivers/dma/ioat/registers.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/dma/ioat/registers.h b/drivers/dma/ioat/registers.h index 63038e18ab03..f015ec196700 100644 --- a/drivers/dma/ioat/registers.h +++ b/drivers/dma/ioat/registers.h @@ -92,9 +92,7 @@ #define IOAT_CHANCTRL_ERR_COMPLETION_EN 0x0004 #define IOAT_CHANCTRL_INT_REARM 0x0001 #define IOAT_CHANCTRL_RUN (IOAT_CHANCTRL_INT_REARM |\ - IOAT_CHANCTRL_ERR_COMPLETION_EN |\ - IOAT_CHANCTRL_ANY_ERR_ABORT_EN |\ - IOAT_CHANCTRL_ERR_INT_EN) + IOAT_CHANCTRL_ANY_ERR_ABORT_EN) #define IOAT_DMA_COMP_OFFSET 0x02 /* 16-bit DMA channel compatibility */ #define IOAT_DMA_COMP_V1 0x0001 /* Compatibility with DMA version 1 */ From de581b65f6fe78168affa552c3bd15b8c80ed614 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 19 Nov 2009 17:08:45 -0700 Subject: [PATCH 558/743] ioat3: specify valid address for disabled-Q or disabled-P Although disabled, hardware still checks address validity, so duplicate the known address. Signed-off-by: Dan Williams --- drivers/dma/ioat/dma_v3.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 4f305f61f878..fad2e9fba490 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -736,10 +736,16 @@ ioat3_prep_pq(struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src, unsigned int src_cnt, const unsigned char *scf, size_t len, unsigned long flags) { + /* specify valid address for disabled result */ + if (flags & DMA_PREP_PQ_DISABLE_P) + dst[0] = dst[1]; + if (flags & DMA_PREP_PQ_DISABLE_Q) + dst[1] = dst[0]; + /* handle the single source multiply case from the raid6 * recovery path */ - if (unlikely((flags & DMA_PREP_PQ_DISABLE_P) && src_cnt == 1)) { + if ((flags & DMA_PREP_PQ_DISABLE_P) && src_cnt == 1) { dma_addr_t single_source[2]; unsigned char single_source_coef[2]; @@ -761,6 +767,12 @@ ioat3_prep_pq_val(struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src, unsigned int src_cnt, const unsigned char *scf, size_t len, enum sum_check_flags *pqres, unsigned long flags) { + /* specify valid address for disabled result */ + if (flags & DMA_PREP_PQ_DISABLE_P) + pq[0] = pq[1]; + if (flags & DMA_PREP_PQ_DISABLE_Q) + pq[1] = pq[0]; + /* the cleanup routine only sets bits on validate failure, it * does not clear bits on validate success... so clear it here */ @@ -778,9 +790,9 @@ ioat3_prep_pqxor(struct dma_chan *chan, dma_addr_t dst, dma_addr_t *src, dma_addr_t pq[2]; memset(scf, 0, src_cnt); - flags |= DMA_PREP_PQ_DISABLE_Q; pq[0] = dst; - pq[1] = ~0; + flags |= DMA_PREP_PQ_DISABLE_Q; + pq[1] = dst; /* specify valid address for disabled result */ return __ioat3_prep_pq_lock(chan, NULL, pq, src, src_cnt, scf, len, flags); @@ -800,9 +812,9 @@ ioat3_prep_pqxor_val(struct dma_chan *chan, dma_addr_t *src, *result = 0; memset(scf, 0, src_cnt); - flags |= DMA_PREP_PQ_DISABLE_Q; pq[0] = src[0]; - pq[1] = ~0; + flags |= DMA_PREP_PQ_DISABLE_Q; + pq[1] = pq[0]; /* specify valid address for disabled result */ return __ioat3_prep_pq_lock(chan, result, pq, &src[1], src_cnt - 1, scf, len, flags); From b2f125bcf5eac41a6d74f75ac573b77753213b74 Mon Sep 17 00:00:00 2001 From: Kevin Wells Date: Thu, 12 Nov 2009 00:28:13 +0100 Subject: [PATCH 559/743] i2c: i2c-pnx: Limit minimum jiffie timeout to 2 Limit minimum jiffie timeout to 2 to prevent early timeout on systems with low tick rates Signed-off-by: Kevin Wells Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-pnx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 6ff6c20f1e78..68c8233b6df0 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -54,6 +54,9 @@ static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap) struct timer_list *timer = &data->mif.timer; int expires = I2C_PNX_TIMEOUT / (1000 / HZ); + if (expires <= 1) + expires = 2; + del_timer_sync(timer); dev_dbg(&adap->dev, "Timer armed at %lu plus %u jiffies.\n", From 4ced24c8973f79113444d1e00ee8bd9e74fbf43e Mon Sep 17 00:00:00 2001 From: Kevin Wells Date: Thu, 12 Nov 2009 00:23:00 +0100 Subject: [PATCH 560/743] i2c: i2c-pnx: Made buf type unsigned to prevent sign extension Made buf type unsigned to prevent sign extension Signed-off-by: Kevin Wells Signed-off-by: Ben Dooks --- include/linux/i2c-pnx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h index f13255e06406..9eb07bbc6522 100644 --- a/include/linux/i2c-pnx.h +++ b/include/linux/i2c-pnx.h @@ -21,7 +21,7 @@ struct i2c_pnx_mif { int mode; /* Interface mode */ struct completion complete; /* I/O completion */ struct timer_list timer; /* Timeout */ - char * buf; /* Data buffer */ + u8 * buf; /* Data buffer */ int len; /* Length of data buffer */ }; From a7d73d8c686d919cc18dec63e5e194f0e5a7206e Mon Sep 17 00:00:00 2001 From: Kevin Wells Date: Thu, 12 Nov 2009 00:25:52 +0100 Subject: [PATCH 561/743] i2c: i2c-pnx: Added missing mach/i2c.h and linux/io.h header file includes Added missing mach/i2c.h and linux/io.h header file includes Signed-off-by: Kevin Wells Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-pnx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 68c8233b6df0..1fca59077949 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -19,7 +19,9 @@ #include #include #include +#include #include +#include #include #include From b57014def9afc2bd8a62299d2f51b77dad5ae0c7 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 19 Nov 2009 17:10:07 -0700 Subject: [PATCH 562/743] ioat2,3: report all uncorrectable errors Modify is_ioat_bug() to catch all errors that are uncorrectable, or not currently handled. Signed-off-by: Dan Williams --- drivers/dma/ioat/dma.h | 4 +--- drivers/dma/ioat/dma_v2.c | 2 ++ drivers/dma/ioat/dma_v3.c | 2 ++ 3 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index c14fdfeb7f33..45edde996480 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -297,9 +297,7 @@ static inline bool is_ioat_suspended(unsigned long status) /* channel was fatally programmed */ static inline bool is_ioat_bug(unsigned long err) { - return !!(err & (IOAT_CHANERR_SRC_ADDR_ERR|IOAT_CHANERR_DEST_ADDR_ERR| - IOAT_CHANERR_NEXT_ADDR_ERR|IOAT_CHANERR_CONTROL_ERR| - IOAT_CHANERR_LENGTH_ERR)); + return !!err; } static inline void ioat_unmap(struct pci_dev *pdev, dma_addr_t addr, size_t len, diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c index 96ffab7d37a7..8f1f7f05deaa 100644 --- a/drivers/dma/ioat/dma_v2.c +++ b/drivers/dma/ioat/dma_v2.c @@ -279,6 +279,8 @@ void ioat2_timer_event(unsigned long data) u32 chanerr; chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); + dev_err(to_dev(chan), "%s: Channel halted (%x)\n", + __func__, chanerr); BUG_ON(is_ioat_bug(chanerr)); } diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index fad2e9fba490..252cf2d3f1da 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -378,6 +378,8 @@ static void ioat3_timer_event(unsigned long data) u32 chanerr; chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); + dev_err(to_dev(chan), "%s: Channel halted (%x)\n", + __func__, chanerr); BUG_ON(is_ioat_bug(chanerr)); } From 4499a24dec00e037da7d09caccad45e7594a9c19 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 19 Nov 2009 17:10:25 -0700 Subject: [PATCH 563/743] dmaengine: include xor/pq validate in device_has_all_tx_types() A channel must include these capabilities to satisfy ASYNC_TX_DISABLE_CHANNEL_SWITCH. Signed-off-by: Dan Williams --- drivers/dma/dmaengine.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index bd0b248de2cf..b6442f09d0fe 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -632,11 +632,15 @@ static bool device_has_all_tx_types(struct dma_device *device) #if defined(CONFIG_ASYNC_XOR) || defined(CONFIG_ASYNC_XOR_MODULE) if (!dma_has_cap(DMA_XOR, device->cap_mask)) return false; + if (!dma_has_cap(DMA_XOR_VAL, device->cap_mask)) + return false; #endif #if defined(CONFIG_ASYNC_PQ) || defined(CONFIG_ASYNC_PQ_MODULE) if (!dma_has_cap(DMA_PQ, device->cap_mask)) return false; + if (!dma_has_cap(DMA_PQ_VAL, device->cap_mask)) + return false; #endif return true; From 7b3cc2b1fc2066391e498f3387204908c4eced21 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 19 Nov 2009 17:10:37 -0700 Subject: [PATCH 564/743] async_tx: build-time toggling of async_{syndrome,xor}_val dma support ioat3.2 does not support asynchronous error notifications which makes the driver experience latencies when non-zero pq validate results are expected. Provide a mechanism for turning off async_xor_val and async_syndrome_val via Kconfig. This approach is generally useful for any driver that specifies ASYNC_TX_DISABLE_CHANNEL_SWITCH and would like to force the async_tx api to fall back to the synchronous path for certain operations. Signed-off-by: Dan Williams --- crypto/async_tx/Kconfig | 5 +++++ crypto/async_tx/async_pq.c | 14 +++++++++++--- crypto/async_tx/async_xor.c | 15 ++++++++++++--- drivers/dma/Kconfig | 2 ++ drivers/dma/dmaengine.c | 6 ++++++ drivers/dma/ioat/dma_v3.c | 10 ++++++++++ 6 files changed, 46 insertions(+), 6 deletions(-) diff --git a/crypto/async_tx/Kconfig b/crypto/async_tx/Kconfig index e5aeb2b79e6f..e28e276ac611 100644 --- a/crypto/async_tx/Kconfig +++ b/crypto/async_tx/Kconfig @@ -23,3 +23,8 @@ config ASYNC_RAID6_RECOV select ASYNC_CORE select ASYNC_PQ +config ASYNC_TX_DISABLE_PQ_VAL_DMA + bool + +config ASYNC_TX_DISABLE_XOR_VAL_DMA + bool diff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c index 6b5cc4fba59f..ec87f53d5059 100644 --- a/crypto/async_tx/async_pq.c +++ b/crypto/async_tx/async_pq.c @@ -240,6 +240,16 @@ async_gen_syndrome(struct page **blocks, unsigned int offset, int disks, } EXPORT_SYMBOL_GPL(async_gen_syndrome); +static inline struct dma_chan * +pq_val_chan(struct async_submit_ctl *submit, struct page **blocks, int disks, size_t len) +{ + #ifdef CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA + return NULL; + #endif + return async_tx_find_channel(submit, DMA_PQ_VAL, NULL, 0, blocks, + disks, len); +} + /** * async_syndrome_val - asynchronously validate a raid6 syndrome * @blocks: source blocks from idx 0..disks-3, P @ disks-2 and Q @ disks-1 @@ -260,9 +270,7 @@ async_syndrome_val(struct page **blocks, unsigned int offset, int disks, size_t len, enum sum_check_flags *pqres, struct page *spare, struct async_submit_ctl *submit) { - struct dma_chan *chan = async_tx_find_channel(submit, DMA_PQ_VAL, - NULL, 0, blocks, disks, - len); + struct dma_chan *chan = pq_val_chan(submit, blocks, disks, len); struct dma_device *device = chan ? chan->device : NULL; struct dma_async_tx_descriptor *tx; unsigned char coefs[disks-2]; diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c index 79182dcb91b7..079ae8ca590b 100644 --- a/crypto/async_tx/async_xor.c +++ b/crypto/async_tx/async_xor.c @@ -234,6 +234,17 @@ static int page_is_zero(struct page *p, unsigned int offset, size_t len) memcmp(a, a + 4, len - 4) == 0); } +static inline struct dma_chan * +xor_val_chan(struct async_submit_ctl *submit, struct page *dest, + struct page **src_list, int src_cnt, size_t len) +{ + #ifdef CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA + return NULL; + #endif + return async_tx_find_channel(submit, DMA_XOR_VAL, &dest, 1, src_list, + src_cnt, len); +} + /** * async_xor_val - attempt a xor parity check with a dma engine. * @dest: destination page used if the xor is performed synchronously @@ -255,9 +266,7 @@ async_xor_val(struct page *dest, struct page **src_list, unsigned int offset, int src_cnt, size_t len, enum sum_check_flags *result, struct async_submit_ctl *submit) { - struct dma_chan *chan = async_tx_find_channel(submit, DMA_XOR_VAL, - &dest, 1, src_list, - src_cnt, len); + struct dma_chan *chan = xor_val_chan(submit, dest, src_list, src_cnt, len); struct dma_device *device = chan ? chan->device : NULL; struct dma_async_tx_descriptor *tx = NULL; dma_addr_t *dma_src = NULL; diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 5903a88351bf..b401dadad4a8 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -26,6 +26,8 @@ config INTEL_IOATDMA select DMA_ENGINE select DCA select ASYNC_TX_DISABLE_CHANNEL_SWITCH + select ASYNC_TX_DISABLE_PQ_VAL_DMA + select ASYNC_TX_DISABLE_XOR_VAL_DMA help Enable support for the Intel(R) I/OAT DMA engine present in recent Intel Xeon chipsets. diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index b6442f09d0fe..8f99354082ce 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -632,16 +632,22 @@ static bool device_has_all_tx_types(struct dma_device *device) #if defined(CONFIG_ASYNC_XOR) || defined(CONFIG_ASYNC_XOR_MODULE) if (!dma_has_cap(DMA_XOR, device->cap_mask)) return false; + + #ifndef CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA if (!dma_has_cap(DMA_XOR_VAL, device->cap_mask)) return false; #endif + #endif #if defined(CONFIG_ASYNC_PQ) || defined(CONFIG_ASYNC_PQ_MODULE) if (!dma_has_cap(DMA_PQ, device->cap_mask)) return false; + + #ifndef CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA if (!dma_has_cap(DMA_PQ_VAL, device->cap_mask)) return false; #endif + #endif return true; } diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 252cf2d3f1da..189788f6351e 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -1206,6 +1206,16 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) device->timer_fn = ioat2_timer_event; } + #ifdef CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA + dma_cap_clear(DMA_PQ_VAL, dma->cap_mask); + dma->device_prep_dma_pq_val = NULL; + #endif + + #ifdef CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA + dma_cap_clear(DMA_XOR_VAL, dma->cap_mask); + dma->device_prep_dma_xor_val = NULL; + #endif + /* -= IOAT ver.3 workarounds =- */ /* Write CHANERRMSK_INT with 3E07h to mask out the errors * that can cause stability issues for IOAT ver.3 From 49954c1567cb0d70d28bb5512d471dc5bd4e2c3f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 19 Nov 2009 17:11:03 -0700 Subject: [PATCH 565/743] ioat3: fix pq completion versus channel deallocation race The completion of a pq operation is notified with a null descriptor appended to the end of the chain. This descriptor needs to be visible to dma clients otherwise the client is precluded from ensuring all operations are quiesced before freeing channel resources, i.e. due to descriptor polling it may get the completion notification ahead of the interrupt delivered by the null descriptor. Signed-off-by: Dan Williams --- drivers/dma/ioat/dma_v3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 189788f6351e..42f6f10fb0cc 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -571,7 +571,7 @@ __ioat3_prep_xor_lock(struct dma_chan *c, enum sum_check_flags *result, dump_desc_dbg(ioat, compl_desc); /* we leave the channel locked to ensure in order submission */ - return &desc->txd; + return &compl_desc->txd; } static struct dma_async_tx_descriptor * @@ -730,7 +730,7 @@ __ioat3_prep_pq_lock(struct dma_chan *c, enum sum_check_flags *result, dump_desc_dbg(ioat, compl_desc); /* we leave the channel locked to ensure in order submission */ - return &desc->txd; + return &compl_desc->txd; } static struct dma_async_tx_descriptor * From 4ff1fa278b0bd1b2dd3c42efc0cb86788ffe05d5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 18 Nov 2009 18:03:19 +0000 Subject: [PATCH 566/743] [ARM] kmap: fix build errors with DEBUG_HIGHMEM enabled d451564 broke ARM by requiring KM_IRQ_PTE, KM_NMI and KM_NMI_PTE to always be defined. Solve this by providing invalid definitions for these constants, but only if CONFIG_DEBUG_HIGHMEM is enabled. Signed-off-by: Russell King --- arch/arm/include/asm/kmap_types.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h index d16ec97ec9a9..c019949a5189 100644 --- a/arch/arm/include/asm/kmap_types.h +++ b/arch/arm/include/asm/kmap_types.h @@ -22,4 +22,10 @@ enum km_type { KM_TYPE_NR }; +#ifdef CONFIG_DEBUG_HIGHMEM +#define KM_NMI (-1) +#define KM_NMI_PTE (-1) +#define KM_IRQ_PTE (-1) +#endif + #endif From 1508c99506b5d57b8892a5d759176000c88c93b6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Nov 2009 13:07:57 +0000 Subject: [PATCH 567/743] ARM: PNX4008: fix watchdog device driver name The PNX core code calls the device 'pnx4008-watchdog' not 'watchdog' Signed-off-by: Russell King Acked-by: Wim Van Sebroeck --- drivers/watchdog/pnx4008_wdt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index f24d04132eda..4d227b152001 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -317,7 +317,7 @@ static int __devexit pnx4008_wdt_remove(struct platform_device *pdev) static struct platform_driver platform_wdt_driver = { .driver = { - .name = "watchdog", + .name = "pnx4008-watchdog", .owner = THIS_MODULE, }, .probe = pnx4008_wdt_probe, @@ -352,4 +352,4 @@ MODULE_PARM_DESC(nowayout, MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -MODULE_ALIAS("platform:watchdog"); +MODULE_ALIAS("platform:pnx4008-watchdog"); From 463bf9000750e08a85ee0b40da3266aae8a54ba2 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 20 Nov 2009 09:21:12 -0500 Subject: [PATCH 568/743] kconfig: Fix make O= local{mod,yes}config When the output directory is something other than the kernel source, the streamline_config script gets confused. This patch passes in the source directory to the script so that it can find the proper files. Reported-by: Peter Zijlstra Tested-by: Peter Zijlstra Signed-off-by: Steven Rostedt --- scripts/kconfig/Makefile | 4 ++-- scripts/kconfig/streamline_config.pl | 12 ++++++------ 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index 6d69c7ccdcc7..80599e3a7994 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -30,7 +30,7 @@ silentoldconfig: $(obj)/conf $< -s $(Kconfig) localmodconfig: $(obj)/streamline_config.pl $(obj)/conf - $(Q)perl $< $(Kconfig) > .tmp.config + $(Q)perl $< $(srctree) $(Kconfig) > .tmp.config $(Q)if [ -f .config ]; then \ cmp -s .tmp.config .config || \ (mv -f .config .config.old.1; \ @@ -44,7 +44,7 @@ localmodconfig: $(obj)/streamline_config.pl $(obj)/conf $(Q)rm -f .tmp.config localyesconfig: $(obj)/streamline_config.pl $(obj)/conf - $(Q)perl $< $(Kconfig) > .tmp.config + $(Q)perl $< $(srctree) $(Kconfig) > .tmp.config $(Q)sed -i s/=m/=y/ .tmp.config $(Q)if [ -f .config ]; then \ cmp -s .tmp.config .config || \ diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl index 95984db8e1e0..0d800820c3cd 100644 --- a/scripts/kconfig/streamline_config.pl +++ b/scripts/kconfig/streamline_config.pl @@ -43,7 +43,6 @@ # make oldconfig # my $config = ".config"; -my $linuxpath = "."; my $uname = `uname -r`; chomp $uname; @@ -111,7 +110,11 @@ sub find_config { find_config; -my @makefiles = `find $linuxpath -name Makefile`; +# Get the build source and top level Kconfig file (passed in) +my $ksource = $ARGV[0]; +my $kconfig = $ARGV[1]; + +my @makefiles = `find $ksource -name Makefile`; my %depends; my %selects; my %prompts; @@ -119,9 +122,6 @@ my %objects; my $var; my $cont = 0; -# Get the top level Kconfig file (passed in) -my $kconfig = $ARGV[0]; - # prevent recursion my %read_kconfigs; @@ -132,7 +132,7 @@ sub read_kconfig { my $config; my @kconfigs; - open(KIN, $kconfig) || die "Can't open $kconfig"; + open(KIN, "$ksource/$kconfig") || die "Can't open $kconfig"; while () { chomp; From 68a31de302bae12010ab116752d4362bd7fe2851 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Fri, 20 Nov 2009 17:50:34 +0100 Subject: [PATCH 569/743] [ARM] pxa/cpufreq: fix index assignments for end marker I stumbled over two small things regarding the .index field assignment in the dynamically created cpu frequency tables for pxa2xx and pxa3xx. Even though that doesn't currently cause any problem, it should still be fixed in case the logic in the CPUFREQ core changes. Signed-off-by: Daniel Mack Signed-off-by: Eric Miao --- arch/arm/mach-pxa/cpufreq-pxa2xx.c | 1 + arch/arm/mach-pxa/cpufreq-pxa3xx.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c index 983cc8c20081..9e4d9816726a 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c @@ -447,6 +447,7 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy) pxa27x_freq_table[i].frequency = freq; pxa27x_freq_table[i].index = i; } + pxa27x_freq_table[i].index = i; pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END; /* diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c index 67f34a8d8e60..149cdd9aee4d 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c @@ -102,7 +102,7 @@ static int setup_freqs_table(struct cpufreq_policy *policy, table[i].index = i; table[i].frequency = freqs[i].cpufreq_mhz * 1000; } - table[num].frequency = i; + table[num].index = i; table[num].frequency = CPUFREQ_TABLE_END; pxa3xx_freqs = freqs; From 30b768323f87bca15f14d6d146da397f98c29fe6 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 20 Nov 2009 04:02:27 +0000 Subject: [PATCH 570/743] ixgbe: move tc variable to CONFIG_IXGBE_DCB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit tc is required by CONFIG_IXGBE_DCB. This also fixes compilation warning: drivers/net/ixgbe/ixgbe_main.c: In function ‘ixgbe_tx_is_paused’: drivers/net/ixgbe/ixgbe_main.c:245: warning: unused variable ‘tc’ Signed-off-by: Jaswinder Singh Rajput Acked-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index a5036f7c1923..a456578b8578 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -240,11 +240,11 @@ static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter, static inline bool ixgbe_tx_is_paused(struct ixgbe_adapter *adapter, struct ixgbe_ring *tx_ring) { - int tc; u32 txoff = IXGBE_TFCS_TXOFF; #ifdef CONFIG_IXGBE_DCB if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + int tc; int reg_idx = tx_ring->reg_idx; int dcb_i = adapter->ring_feature[RING_F_DCB].indices; From 0109d7e614e016a842569628116f54847a177f6e Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 20 Nov 2009 21:50:36 +0000 Subject: [PATCH 571/743] SLOW_WORK: Fix CIFS to pass THIS_MODULE to slow_work_register_user() As of the patch: SLOW_WORK: Wait for outstanding work items belonging to a module to clear Wait for outstanding slow work items belonging to a module to clear when unregistering that module as a user of the facility. This prevents the put_ref code of a work item from being taken away before it returns. slow_work_register_user() takes a module pointer as an argument. CIFS must now pass THIS_MODULE as that argument, lest the following error be observed: fs/cifs/cifsfs.c: In function 'init_cifs': fs/cifs/cifsfs.c:1040: error: too few arguments to function 'slow_work_register_user' Signed-off-by: David Howells --- fs/cifs/cifsfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 9a5e4f5f3122..29f1da761bbf 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -1037,7 +1037,7 @@ init_cifs(void) if (rc) goto out_unregister_key_type; #endif - rc = slow_work_register_user(); + rc = slow_work_register_user(THIS_MODULE); if (rc) goto out_unregister_resolver_key; From 1c2ea8a2c0b71cc5e07f518370d458d692c9b21a Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 20 Nov 2009 21:50:40 +0000 Subject: [PATCH 572/743] SLOW_WORK: Fix GFS2 to #include before using THIS_MODULE GFS2 has been altered to pass THIS_MODULE to slow_work_register_user(), but hasn't been altered to #include to provide it, resulting in the following error: fs/gfs2/recovery.c:596: error: 'THIS_MODULE' undeclared here (not in a function) Add the missing #include. Signed-off-by: David Howells --- fs/gfs2/recovery.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/gfs2/recovery.c b/fs/gfs2/recovery.c index b2bb779f09ed..09fa31965576 100644 --- a/fs/gfs2/recovery.c +++ b/fs/gfs2/recovery.c @@ -7,6 +7,7 @@ * of the GNU General Public License version 2. */ +#include #include #include #include From 4fa9f4ede88b4e2ff135b6e5717499d734508c62 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 20 Nov 2009 21:50:44 +0000 Subject: [PATCH 573/743] FS-Cache: Provide nop fscache_stat_d() if CONFIG_FSCACHE_STATS=n Provide nop fscache_stat_d() macro if CONFIG_FSCACHE_STATS=n lest errors like the following occur: fs/fscache/cache.c: In function 'fscache_withdraw_cache': fs/fscache/cache.c:386: error: implicit declaration of function 'fscache_stat_d' fs/fscache/cache.c:386: error: 'fscache_n_cop_sync_cache' undeclared (first use in this function) fs/fscache/cache.c:386: error: (Each undeclared identifier is reported only once fs/fscache/cache.c:386: error: for each function it appears in.) fs/fscache/cache.c:392: error: 'fscache_n_cop_dissociate_pages' undeclared (first use in this function) Signed-off-by: David Howells --- fs/fscache/internal.h | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index 0ca2566e038c..edd7434ab6e5 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -259,6 +259,7 @@ extern const struct file_operations fscache_stats_fops; #define __fscache_stat(stat) (NULL) #define fscache_stat(stat) do {} while (0) +#define fscache_stat_d(stat) do {} while (0) #endif /* From 38eb394e33d65abb9d05411547d2058db53b4d23 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 19 Nov 2009 12:34:20 +0000 Subject: [PATCH 574/743] e1000e: partial revert of 3ec2a2b8 plus FC workraround for 82577/8 Commit 3ec2a2b80f3eb53851fe4cef9e65b5d33376ef89 broke Tx/Rx when using jumbo frames on certain parts (i.e. only PAUSE frames could be exchanged once the high water mark was reached preventing normal packet traffic). This patch reverts the breakage and sets appropriate high and low water marks of the Rx FIFO for 82577/82578 which require a workaround due to a flow control issue in hardware. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/e1000.h | 2 ++ drivers/net/e1000e/ich8lan.c | 1 + drivers/net/e1000e/netdev.c | 41 +++++++++++++++++++++++++----------- 3 files changed, 32 insertions(+), 12 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 189dfa2d6c76..3e187b0e4203 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -141,6 +141,8 @@ struct e1000_info; #define HV_TNCRS_UPPER PHY_REG(778, 29) /* Transmit with no CRS */ #define HV_TNCRS_LOWER PHY_REG(778, 30) +#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */ + /* BM PHY Copper Specific Status */ #define BM_CS_STATUS 17 #define BM_CS_STATUS_LINK_UP 0x0400 diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 51ddb04ab195..92cf10333654 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -3558,6 +3558,7 @@ struct e1000_info e1000_pch_info = { | FLAG_HAS_AMT | FLAG_HAS_FLASH | FLAG_HAS_JUMBO_FRAMES + | FLAG_DISABLE_FC_PAUSE_TIME /* errata */ | FLAG_APME_IN_WUC, .pba = 26, .max_hw_frame_size = 4096, diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 0687c6aa4e46..a1a5a6f15a65 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2769,25 +2769,38 @@ void e1000e_reset(struct e1000_adapter *adapter) /* * flow control settings * - * The high water mark must be low enough to fit two full frame + * The high water mark must be low enough to fit one full frame * (or the size used for early receive) above it in the Rx FIFO. * Set it to the lower of: * - 90% of the Rx FIFO size, and * - the full Rx FIFO size minus the early receive size (for parts * with ERT support assuming ERT set to E1000_ERT_2048), or - * - the full Rx FIFO size minus two full frames + * - the full Rx FIFO size minus one full frame */ - if ((adapter->flags & FLAG_HAS_ERT) && - (adapter->netdev->mtu > ETH_DATA_LEN)) - hwm = min(((pba << 10) * 9 / 10), - ((pba << 10) - (E1000_ERT_2048 << 3))); - else - hwm = min(((pba << 10) * 9 / 10), - ((pba << 10) - (2 * adapter->max_frame_size))); + if (hw->mac.type == e1000_pchlan) { + /* + * Workaround PCH LOM adapter hangs with certain network + * loads. If hangs persist, try disabling Tx flow control. + */ + if (adapter->netdev->mtu > ETH_DATA_LEN) { + fc->high_water = 0x3500; + fc->low_water = 0x1500; + } else { + fc->high_water = 0x5000; + fc->low_water = 0x3000; + } + } else { + if ((adapter->flags & FLAG_HAS_ERT) && + (adapter->netdev->mtu > ETH_DATA_LEN)) + hwm = min(((pba << 10) * 9 / 10), + ((pba << 10) - (E1000_ERT_2048 << 3))); + else + hwm = min(((pba << 10) * 9 / 10), + ((pba << 10) - adapter->max_frame_size)); - fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */ - fc->low_water = (fc->high_water - (2 * adapter->max_frame_size)); - fc->low_water &= E1000_FCRTL_RTL; /* 8-byte granularity */ + fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */ + fc->low_water = fc->high_water - 8; + } if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME) fc->pause_time = 0xFFFF; @@ -2813,6 +2826,10 @@ void e1000e_reset(struct e1000_adapter *adapter) if (mac->ops.init_hw(hw)) e_err("Hardware Error\n"); + /* additional part of the flow-control workaround above */ + if (hw->mac.type == e1000_pchlan) + ew32(FCRTV_PCH, 0x1000); + e1000_update_mng_vlan(adapter); /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ From 842ec8b64ac34e9b245da31b4a5a49c3e744a714 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 19 Nov 2009 12:34:40 +0000 Subject: [PATCH 575/743] e1000e: read of PHY register may access wrong page on 82578 Remove unnecessary workaround that mistakenly does not perform a page select operation for PHY registers 29 and 30 (assuming these are the PHY debug port address and data registers) on 82578 which can cause reads of the Transmit with No Carrier Sense statistics register on page 778 to be read from an incorrect page. Also error out if the page select operation fails. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/phy.c | 46 +++++++++++++++++++--------------------- 1 file changed, 22 insertions(+), 24 deletions(-) diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 03175b3a2c9e..8189d00bfefe 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -2658,19 +2658,18 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, page = 0; if (reg > MAX_PHY_MULTI_PAGE_REG) { - if ((hw->phy.type != e1000_phy_82578) || - ((reg != I82578_ADDR_REG) && - (reg != I82578_ADDR_REG + 1))) { - u32 phy_addr = hw->phy.addr; + u32 phy_addr = hw->phy.addr; - hw->phy.addr = 1; + hw->phy.addr = 1; - /* Page is shifted left, PHY expects (page x 32) */ - ret_val = e1000e_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (page << IGP_PAGE_SHIFT)); - hw->phy.addr = phy_addr; - } + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000e_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (page << IGP_PAGE_SHIFT)); + hw->phy.addr = phy_addr; + + if (ret_val) + goto out; } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, @@ -2678,7 +2677,7 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, out: /* Revert to MDIO fast mode, if applicable */ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) - ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + ret_val |= e1000_set_mdio_slow_mode_hv(hw, false); if (!locked) hw->phy.ops.release_phy(hw); @@ -2784,19 +2783,18 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, } if (reg > MAX_PHY_MULTI_PAGE_REG) { - if ((hw->phy.type != e1000_phy_82578) || - ((reg != I82578_ADDR_REG) && - (reg != I82578_ADDR_REG + 1))) { - u32 phy_addr = hw->phy.addr; + u32 phy_addr = hw->phy.addr; - hw->phy.addr = 1; + hw->phy.addr = 1; - /* Page is shifted left, PHY expects (page x 32) */ - ret_val = e1000e_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (page << IGP_PAGE_SHIFT)); - hw->phy.addr = phy_addr; - } + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000e_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (page << IGP_PAGE_SHIFT)); + hw->phy.addr = phy_addr; + + if (ret_val) + goto out; } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, @@ -2805,7 +2803,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, out: /* Revert to MDIO fast mode, if applicable */ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) - ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + ret_val |= e1000_set_mdio_slow_mode_hv(hw, false); if (!locked) hw->phy.ops.release_phy(hw); From 29afd690636dab36fe437c54b3a9d5e093bdcd9b Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 19 Nov 2009 12:35:08 +0000 Subject: [PATCH 576/743] e1000e: set flow control thresholds properly after enabling/disabling pause When flow control (pause) parameters were changed via ethtool (i.e. enabled or disabled), the newly calculated thresholds were not being written to the device for non-fiber media. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ethtool.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 1bf4d2a5d34f..e82638ecae88 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -327,10 +327,18 @@ static int e1000_set_pauseparam(struct net_device *netdev, hw->fc.current_mode = hw->fc.requested_mode; - retval = ((hw->phy.media_type == e1000_media_type_fiber) ? - hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw)); + if (hw->phy.media_type == e1000_media_type_fiber) { + retval = hw->mac.ops.setup_link(hw); + /* implicit goto out */ + } else { + retval = e1000e_force_mac_fc(hw); + if (retval) + goto out; + e1000e_set_fc_watermarks(hw); + } } +out: clear_bit(__E1000_RESETTING, &adapter->state); return retval; } From 4c86e0b9455c8fa8122fc2d10935e892838c8568 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 19 Nov 2009 12:35:26 +0000 Subject: [PATCH 577/743] e1000e: add Tx timeout factor for 100Mbps On some devices (e.g. 82578) not having a Tx timeout factor when linked at 100Mbps can cause false reports of hardware hangs on busy hubs. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index a1a5a6f15a65..63458270ce1b 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -3627,7 +3627,7 @@ static void e1000_watchdog_task(struct work_struct *work) case SPEED_100: txb2b = 0; netdev->tx_queue_len = 100; - /* maybe add some timeout factor ? */ + adapter->tx_timeout_factor = 10; break; } From 610c992884c80566de31d71ec361a5a7b2a0ed5e Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 19 Nov 2009 12:35:45 +0000 Subject: [PATCH 578/743] e1000e: flow control thresholds not correct when changing mtu When changing MTU, save it off prior to resetting otherwise the flow control thresholds may be miscalculated. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/netdev.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 63458270ce1b..fad8f9ea0043 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4305,8 +4305,10 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) msleep(1); - /* e1000e_down has a dependency on max_frame_size */ + /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */ adapter->max_frame_size = max_frame; + e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); + netdev->mtu = new_mtu; if (netif_running(netdev)) e1000e_down(adapter); @@ -4336,9 +4338,6 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; - e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); - netdev->mtu = new_mtu; - if (netif_running(netdev)) e1000e_up(adapter); else From 189983d469c6d98e64ddfb9f9ce76725cb082ee5 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 19 Nov 2009 12:36:04 +0000 Subject: [PATCH 579/743] e1000e: remove unnecessary 82577 workaround causing link issues A workaround for pre-release versions of 82577 is causing link issues on some switches. The workaround is no longer needed on production parts so remove it. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/phy.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 8189d00bfefe..85f955f70417 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -71,7 +71,6 @@ static const u16 e1000_igp_2_cable_length_table[] = #define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15) #define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */ #define I82577_CTRL_REG 23 -#define I82577_CTRL_DOWNSHIFT_MASK (7 << 10) /* 82577 specific PHY registers */ #define I82577_PHY_CTRL_2 18 @@ -660,15 +659,6 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) phy_data |= I82577_CFG_ENABLE_DOWNSHIFT; ret_val = phy->ops.write_phy_reg(hw, I82577_CFG_REG, phy_data); - if (ret_val) - goto out; - - /* Set number of link attempts before downshift */ - ret_val = phy->ops.read_phy_reg(hw, I82577_CTRL_REG, &phy_data); - if (ret_val) - goto out; - phy_data &= ~I82577_CTRL_DOWNSHIFT_MASK; - ret_val = phy->ops.write_phy_reg(hw, I82577_CTRL_REG, phy_data); out: return ret_val; From 818f33313caab9be2a10458500dbed4a88c1b334 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 19 Nov 2009 14:17:30 +0000 Subject: [PATCH 580/743] e1000e: do not initiate autonegotiation during OEM configuration When configuring the OEM bits in the PHY on 82577/82578, do not restart autonegotiation if the firmware is blocking it (e.g. when an IDE-R session is active) because the link must not go down. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 92cf10333654..eff3f4783655 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1118,7 +1118,8 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) oem_reg |= HV_OEM_BITS_LPLU; } /* Restart auto-neg to activate the bits */ - oem_reg |= HV_OEM_BITS_RESTART_AN; + if (!e1000_check_reset_block(hw)) + oem_reg |= HV_OEM_BITS_RESTART_AN; ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg); out: From 0ebe74e7ba5929f46d5db4d735a9d7a85a38976b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 20 Nov 2009 09:19:10 +0000 Subject: [PATCH 581/743] net: ETHOC should depend on HAS_DMA When building for Sun 3: drivers/net/ethoc.c:1091: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `ethoc_probe': drivers/net/ethoc.c:965: undefined reference to `dma_alloc_coherent' drivers/net/ethoc.c:1063: undefined reference to `dma_free_coherent' Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- drivers/net/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index e19ca4bb7510..b2f71f79baaf 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -975,7 +975,7 @@ config ENC28J60_WRITEVERIFY config ETHOC tristate "OpenCores 10/100 Mbps Ethernet MAC support" - depends on NET_ETHERNET && HAS_IOMEM + depends on NET_ETHERNET && HAS_IOMEM && HAS_DMA select MII select PHYLIB select CRC32 From 4a91ca4e18553b1f96ce68216459c7d9669f8b3d Mon Sep 17 00:00:00 2001 From: "David J. Choi" Date: Thu, 19 Nov 2009 15:34:30 +0000 Subject: [PATCH 582/743] drivers/net: ks8851_mll ethernet network driver -resubmit Summary of Changes: -Fix to receive multicast packets by setting the corresponding hardware bit during initialization. -Fix to re-enable the interface [by interface up command(ifup)] while the interface is down. -Fix to be able to down the interface by passing the last parameter correctly to request_irq(). -Remove to read 4 extra bytes from the receiving queue after reading a packet, even though it does not cause a predictable issue now. -Remove occurrences of transmission done interrupt in order to tx throughput enhancement. -Enable IP checksum for packet receiving by setting the corresponding hardware bit during initialization. -Relocate ks_enable_int()/ks_disable_int() in order not to declare those functions at the beginning of the file. -Rename ks_enable()/_disable() to ks_enable_qmu()/ks_disable_qmu() in order to give more meaningful names and relocate them not declaire those functions at the beginning of the file. Signed-off-by: David J. Choi Signed-off-by: David S. Miller --- drivers/net/ks8851_mll.c | 142 +++++++++++++++++++-------------------- 1 file changed, 68 insertions(+), 74 deletions(-) diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c index 0be14d702beb..c146304d8d6c 100644 --- a/drivers/net/ks8851_mll.c +++ b/drivers/net/ks8851_mll.c @@ -568,6 +568,16 @@ static inline void ks_outblk(struct ks_net *ks, u16 *wptr, u32 len) iowrite16(*wptr++, ks->hw_addr); } +static void ks_disable_int(struct ks_net *ks) +{ + ks_wrreg16(ks, KS_IER, 0x0000); +} /* ks_disable_int */ + +static void ks_enable_int(struct ks_net *ks) +{ + ks_wrreg16(ks, KS_IER, ks->rc_ier); +} /* ks_enable_int */ + /** * ks_tx_fifo_space - return the available hardware buffer size. * @ks: The chip information @@ -681,6 +691,47 @@ static void ks_soft_reset(struct ks_net *ks, unsigned op) } +void ks_enable_qmu(struct ks_net *ks) +{ + u16 w; + + w = ks_rdreg16(ks, KS_TXCR); + /* Enables QMU Transmit (TXCR). */ + ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE); + + /* + * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame + * Enable + */ + + w = ks_rdreg16(ks, KS_RXQCR); + ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE); + + /* Enables QMU Receive (RXCR1). */ + w = ks_rdreg16(ks, KS_RXCR1); + ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE); + ks->enabled = true; +} /* ks_enable_qmu */ + +static void ks_disable_qmu(struct ks_net *ks) +{ + u16 w; + + w = ks_rdreg16(ks, KS_TXCR); + + /* Disables QMU Transmit (TXCR). */ + w &= ~TXCR_TXE; + ks_wrreg16(ks, KS_TXCR, w); + + /* Disables QMU Receive (RXCR1). */ + w = ks_rdreg16(ks, KS_RXCR1); + w &= ~RXCR1_RXE ; + ks_wrreg16(ks, KS_RXCR1, w); + + ks->enabled = false; + +} /* ks_disable_qmu */ + /** * ks_read_qmu - read 1 pkt data from the QMU. * @ks: The chip information @@ -752,7 +803,7 @@ static void ks_rcv(struct ks_net *ks, struct net_device *netdev) (frame_hdr->len < RX_BUF_SIZE) && frame_hdr->len)) { skb_reserve(skb, 2); /* read data block including CRC 4 bytes */ - ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len + 4); + ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len); skb_put(skb, frame_hdr->len); skb->dev = netdev; skb->protocol = eth_type_trans(skb, netdev); @@ -861,7 +912,7 @@ static int ks_net_open(struct net_device *netdev) ks_dbg(ks, "%s - entry\n", __func__); /* reset the HW */ - err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, ks); + err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, netdev); if (err) { printk(KERN_ERR "Failed to request IRQ: %d: %d\n", @@ -869,6 +920,15 @@ static int ks_net_open(struct net_device *netdev) return err; } + /* wake up powermode to normal mode */ + ks_set_powermode(ks, PMECR_PM_NORMAL); + mdelay(1); /* wait for normal mode to take effect */ + + ks_wrreg16(ks, KS_ISR, 0xffff); + ks_enable_int(ks); + ks_enable_qmu(ks); + netif_start_queue(ks->netdev); + if (netif_msg_ifup(ks)) ks_dbg(ks, "network device %s up\n", netdev->name); @@ -892,19 +952,14 @@ static int ks_net_stop(struct net_device *netdev) netif_stop_queue(netdev); - kfree(ks->frame_head_info); - mutex_lock(&ks->lock); /* turn off the IRQs and ack any outstanding */ ks_wrreg16(ks, KS_IER, 0x0000); ks_wrreg16(ks, KS_ISR, 0xffff); - /* shutdown RX process */ - ks_wrreg16(ks, KS_RXCR1, 0x0000); - - /* shutdown TX process */ - ks_wrreg16(ks, KS_TXCR, 0x0000); + /* shutdown RX/TX QMU */ + ks_disable_qmu(ks); /* set powermode to soft power down to save power */ ks_set_powermode(ks, PMECR_PM_SOFTDOWN); @@ -929,17 +984,8 @@ static int ks_net_stop(struct net_device *netdev) */ static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len) { - unsigned fid = ks->fid; - - fid = ks->fid; - ks->fid = (ks->fid + 1) & TXFR_TXFID_MASK; - - /* reduce the tx interrupt occurrances. */ - if (!fid) - fid |= TXFR_TXIC; /* irq on completion */ - /* start header at txb[0] to align txw entries */ - ks->txh.txw[0] = cpu_to_le16(fid); + ks->txh.txw[0] = 0; ks->txh.txw[1] = cpu_to_le16(len); /* 1. set sudo-DMA mode */ @@ -957,16 +1003,6 @@ static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len) ; } -static void ks_disable_int(struct ks_net *ks) -{ - ks_wrreg16(ks, KS_IER, 0x0000); -} /* ks_disable_int */ - -static void ks_enable_int(struct ks_net *ks) -{ - ks_wrreg16(ks, KS_IER, ks->rc_ier); -} /* ks_enable_int */ - /** * ks_start_xmit - transmit packet * @skb : The buffer to transmit @@ -1410,25 +1446,6 @@ static int ks_read_selftest(struct ks_net *ks) return ret; } -static void ks_disable(struct ks_net *ks) -{ - u16 w; - - w = ks_rdreg16(ks, KS_TXCR); - - /* Disables QMU Transmit (TXCR). */ - w &= ~TXCR_TXE; - ks_wrreg16(ks, KS_TXCR, w); - - /* Disables QMU Receive (RXCR1). */ - w = ks_rdreg16(ks, KS_RXCR1); - w &= ~RXCR1_RXE ; - ks_wrreg16(ks, KS_RXCR1, w); - - ks->enabled = false; - -} /* ks_disable */ - static void ks_setup(struct ks_net *ks) { u16 w; @@ -1463,7 +1480,7 @@ static void ks_setup(struct ks_net *ks) w = TXCR_TXFCE | TXCR_TXPE | TXCR_TXCRC | TXCR_TCGIP; ks_wrreg16(ks, KS_TXCR, w); - w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE; + w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE | RXCR1_RXME | RXCR1_RXIPFCC; if (ks->promiscuous) /* bPromiscuous */ w |= (RXCR1_RXAE | RXCR1_RXINVF); @@ -1486,28 +1503,6 @@ static void ks_setup_int(struct ks_net *ks) ks->rc_ier = (IRQ_LCI | IRQ_TXI | IRQ_RXI); } /* ks_setup_int */ -void ks_enable(struct ks_net *ks) -{ - u16 w; - - w = ks_rdreg16(ks, KS_TXCR); - /* Enables QMU Transmit (TXCR). */ - ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE); - - /* - * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame - * Enable - */ - - w = ks_rdreg16(ks, KS_RXQCR); - ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE); - - /* Enables QMU Receive (RXCR1). */ - w = ks_rdreg16(ks, KS_RXCR1); - ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE); - ks->enabled = true; -} /* ks_enable */ - static int ks_hw_init(struct ks_net *ks) { #define MHEADER_SIZE (sizeof(struct type_frame_head) * MAX_RECV_FRAMES) @@ -1612,11 +1607,9 @@ static int __devinit ks8851_probe(struct platform_device *pdev) ks_soft_reset(ks, GRR_GSR); ks_hw_init(ks); - ks_disable(ks); + ks_disable_qmu(ks); ks_setup(ks); ks_setup_int(ks); - ks_enable_int(ks); - ks_enable(ks); memcpy(netdev->dev_addr, ks->mac_addr, 6); data = ks_rdreg16(ks, KS_OBCR); @@ -1658,6 +1651,7 @@ static int __devexit ks8851_remove(struct platform_device *pdev) struct ks_net *ks = netdev_priv(netdev); struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + kfree(ks->frame_head_info); unregister_netdev(netdev); iounmap(ks->hw_addr); free_netdev(netdev); From 507eebef86a59713c2180c813d90f98a7bf6c2b4 Mon Sep 17 00:00:00 2001 From: "chaithrika@ti.com" Date: Thu, 1 Oct 2009 10:25:19 +0000 Subject: [PATCH 583/743] TI DaVinci EMAC: Minor macro related updates Use BIT for macro definitions wherever possible, remove unused and redundant macros. Signed-off-by: Chaithrika U S Signed-off-by: David S. Miller --- drivers/net/davinci_emac.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index db6380379478..e3478314c002 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -164,16 +164,14 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; # define EMAC_MBP_MCASTCHAN(ch) ((ch) & 0x7) /* EMAC mac_control register */ -#define EMAC_MACCONTROL_TXPTYPE (0x200) -#define EMAC_MACCONTROL_TXPACEEN (0x40) -#define EMAC_MACCONTROL_MIIEN (0x20) -#define EMAC_MACCONTROL_GIGABITEN (0x80) -#define EMAC_MACCONTROL_GIGABITEN_SHIFT (7) -#define EMAC_MACCONTROL_FULLDUPLEXEN (0x1) +#define EMAC_MACCONTROL_TXPTYPE BIT(9) +#define EMAC_MACCONTROL_TXPACEEN BIT(6) +#define EMAC_MACCONTROL_GMIIEN BIT(5) +#define EMAC_MACCONTROL_GIGABITEN BIT(7) +#define EMAC_MACCONTROL_FULLDUPLEXEN BIT(0) #define EMAC_MACCONTROL_RMIISPEED_MASK BIT(15) /* GIGABIT MODE related bits */ -#define EMAC_DM646X_MACCONTORL_GMIIEN BIT(5) #define EMAC_DM646X_MACCONTORL_GIG BIT(7) #define EMAC_DM646X_MACCONTORL_GIGFORCE BIT(17) @@ -192,10 +190,10 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; #define EMAC_RX_BUFFER_OFFSET_MASK (0xFFFF) /* MAC_IN_VECTOR (0x180) register bit fields */ -#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT (0x20000) -#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT (0x10000) -#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC (0x0100) -#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC (0x01) +#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT BIT(17) +#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT BIT(16) +#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC BIT(8) +#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC BIT(0) /** NOTE:: For DM646x the IN_VECTOR has changed */ #define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC BIT(EMAC_DEF_RX_CH) @@ -203,7 +201,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; #define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT BIT(26) #define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT BIT(27) - /* CPPI bit positions */ #define EMAC_CPPI_SOP_BIT BIT(31) #define EMAC_CPPI_EOP_BIT BIT(30) @@ -750,8 +747,7 @@ static void emac_update_phystatus(struct emac_priv *priv) if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) { mac_control = emac_read(EMAC_MACCONTROL); - mac_control |= (EMAC_DM646X_MACCONTORL_GMIIEN | - EMAC_DM646X_MACCONTORL_GIG | + mac_control |= (EMAC_DM646X_MACCONTORL_GIG | EMAC_DM646X_MACCONTORL_GIGFORCE); } else { /* Clear the GIG bit and GIGFORCE bit */ @@ -2108,7 +2104,7 @@ static int emac_hw_enable(struct emac_priv *priv) /* Enable MII */ val = emac_read(EMAC_MACCONTROL); - val |= (EMAC_MACCONTROL_MIIEN); + val |= (EMAC_MACCONTROL_GMIIEN); emac_write(EMAC_MACCONTROL, val); /* Enable NAPI and interrupts */ From 31769cef2e973544164aa7d0db2e2024660d5e21 Mon Sep 17 00:00:00 2001 From: Jay Fenlason Date: Sat, 21 Nov 2009 00:05:56 +0100 Subject: [PATCH 584/743] firewire: ohci: pass correct iso xmit timestamps to core Here is the final set of patches I used to get ffado to work with the new firewire stack. With these patches, I was able to start ardour and record from and playback to my PreSonus Inspire1394 from a (mostly) Fedora 12 system. Signed-off-by: Jay Fenlason Until now, firewire-ohci exposed only the transmit cycle of the last transmitted packet at each isochronous transmit complete event. This made it impossible for FFADO (FireWire audio drivers in userspace) to synchronize audio-out streams. The fix is to store the timestamp of each packet in the iso xmit event. As a bonus, the transfer status is stored too. Signed-off-by: Stefan Richter --- drivers/firewire/ohci.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index c07cfada190a..94260aa76aa3 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -1904,15 +1904,30 @@ static int handle_it_packet(struct context *context, { struct iso_context *ctx = container_of(context, struct iso_context, context); + int i; + struct descriptor *pd; - if (last->transfer_status == 0) - /* This descriptor isn't done yet, stop iteration. */ + for (pd = d; pd <= last; pd++) + if (pd->transfer_status) + break; + if (pd > last) + /* Descriptor(s) not done yet, stop iteration */ return 0; - if (le16_to_cpu(last->control) & DESCRIPTOR_IRQ_ALWAYS) + i = ctx->header_length; + if (i + 4 < PAGE_SIZE) { + /* Present this value as big-endian to match the receive code */ + *(__be32 *)(ctx->header + i) = cpu_to_be32( + ((u32)le16_to_cpu(pd->transfer_status) << 16) | + le16_to_cpu(pd->res_count)); + ctx->header_length += 4; + } + if (le16_to_cpu(last->control) & DESCRIPTOR_IRQ_ALWAYS) { ctx->base.callback(&ctx->base, le16_to_cpu(last->res_count), - 0, NULL, ctx->base.callback_data); - + ctx->header_length, ctx->header, + ctx->base.callback_data); + ctx->header_length = 0; + } return 1; } From f8d5e5a8f5be475796c7f357e43546c2d7f44540 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 21 Nov 2009 16:00:28 +0000 Subject: [PATCH 585/743] ARM: PNX4008: i2c-pnx: use the same dev_id for request_irq and free_irq This allows i2c-pnx to free its interrupt handler when the module is removed or if an error occurs; using the same dev_id for both request_irq and free_irq is desirable. Signed-off-by: Russell King Acked-by: Ben Dooks --- drivers/i2c/busses/i2c-pnx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 1fca59077949..fbab6846ae64 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -650,7 +650,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) return 0; out_irq: - free_irq(alg_data->irq, alg_data); + free_irq(alg_data->irq, i2c_pnx->adapter); out_clock: i2c_pnx->set_clock_stop(pdev); out_unmap: @@ -669,7 +669,7 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev) struct i2c_adapter *adap = i2c_pnx->adapter; struct i2c_pnx_algo_data *alg_data = adap->algo_data; - free_irq(alg_data->irq, alg_data); + free_irq(alg_data->irq, i2c_pnx->adapter); i2c_del_adapter(adap); i2c_pnx->set_clock_stop(pdev); iounmap((void *)alg_data->ioaddr); From 5d521fd36de4e61ab16a358df54c5babe153396c Mon Sep 17 00:00:00 2001 From: Amit Kumar Salecha Date: Fri, 20 Nov 2009 15:09:32 +0000 Subject: [PATCH 586/743] netxen: fix memory initialization Avoid resetting memory during initialization, skip this memory block during driver probe. Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_init.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index e40b914d6faf..8a0904368e08 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -544,6 +544,8 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) continue; if (off == (ROMUSB_GLB + 0x1c)) /* MS clock */ continue; + if ((off & 0x0ff00000) == NETXEN_CRB_DDR_NET) + continue; if (off == (NETXEN_CRB_PEG_NET_1 + 0x18)) buf[i].data = 0x1020; /* skip the function enable register */ From a7483b0afa63e851c4438ddda8934a296851f1de Mon Sep 17 00:00:00 2001 From: Narender Kumar Date: Fri, 20 Nov 2009 15:09:33 +0000 Subject: [PATCH 587/743] netxen: fix promisc for NX2031. Kernel crashes, if promisc mode set without disabling rx queue. Before changing mode in NX2031 chip, wait till rx queue drains. Signed-off-by: Narender Kumar Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_hdr.h | 2 ++ drivers/net/netxen/netxen_nic_hw.c | 49 ++++++++++++++++++++++------- 2 files changed, 40 insertions(+), 11 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h index 1c46da632125..17bb3818d84e 100644 --- a/drivers/net/netxen/netxen_nic_hdr.h +++ b/drivers/net/netxen/netxen_nic_hdr.h @@ -545,6 +545,8 @@ enum { #define NETXEN_NIU_TEST_MUX_CTL (NETXEN_CRB_NIU + 0x00094) #define NETXEN_NIU_XG_PAUSE_CTL (NETXEN_CRB_NIU + 0x00098) #define NETXEN_NIU_XG_PAUSE_LEVEL (NETXEN_CRB_NIU + 0x000dc) +#define NETXEN_NIU_FRAME_COUNT_SELECT (NETXEN_CRB_NIU + 0x000ac) +#define NETXEN_NIU_FRAME_COUNT (NETXEN_CRB_NIU + 0x000b0) #define NETXEN_NIU_XG_SEL (NETXEN_CRB_NIU + 0x00128) #define NETXEN_NIU_GB_PAUSE_CTL (NETXEN_CRB_NIU + 0x0030c) diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 3185a98b0917..e2c4a0192ea1 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -383,24 +383,51 @@ int netxen_niu_disable_xg_port(struct netxen_adapter *adapter) int netxen_p2_nic_set_promisc(struct netxen_adapter *adapter, u32 mode) { - __u32 reg; + u32 mac_cfg; + u32 cnt = 0; + __u32 reg = 0x0200; u32 port = adapter->physical_port; + u16 board_type = adapter->ahw.board_type; if (port > NETXEN_NIU_MAX_XG_PORTS) return -EINVAL; - reg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port)); - if (mode == NETXEN_NIU_PROMISC_MODE) - reg = (reg | 0x2000UL); - else - reg = (reg & ~0x2000UL); + mac_cfg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port)); + mac_cfg &= ~0x4; + NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg); - if (mode == NETXEN_NIU_ALLMULTI_MODE) - reg = (reg | 0x1000UL); - else - reg = (reg & ~0x1000UL); + if ((board_type == NETXEN_BRDTYPE_P2_SB31_10G_IMEZ) || + (board_type == NETXEN_BRDTYPE_P2_SB31_10G_HMEZ)) + reg = (0x20 << port); - NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg); + NXWR32(adapter, NETXEN_NIU_FRAME_COUNT_SELECT, reg); + + mdelay(10); + + while (NXRD32(adapter, NETXEN_NIU_FRAME_COUNT) && ++cnt < 20) + mdelay(10); + + if (cnt < 20) { + + reg = NXRD32(adapter, + NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port)); + + if (mode == NETXEN_NIU_PROMISC_MODE) + reg = (reg | 0x2000UL); + else + reg = (reg & ~0x2000UL); + + if (mode == NETXEN_NIU_ALLMULTI_MODE) + reg = (reg | 0x1000UL); + else + reg = (reg & ~0x1000UL); + + NXWR32(adapter, + NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg); + } + + mac_cfg |= 0x4; + NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg); return 0; } From 5d09e534bbb94e1fdc8e4783ac822bc172465a91 Mon Sep 17 00:00:00 2001 From: Narender Kumar Date: Fri, 20 Nov 2009 22:08:57 +0000 Subject: [PATCH 588/743] netxen : fix BOND_MODE_TLB/ALB mode. o Along with netdev->perm_addr, mac address will be maintained in device private structure. o Device limitation: We need to set mac address when ever interface comes up. In ALB/TAL mode, bonding driver calls set_mac for all slave with bond mac address. But bonding driver set netdev->dev_addr field to its original value, after enslaving interfaces. When ever active slave changes, it swap dev_addr of inactive slave with active. Yet it doesn't notify driver about change in netdev->dev_addr. As netxen driver need to set mac addr when ever interface comes up, it can't rely on netdev->dev_addr field. Specially in case of bonding mode ALB/TLB. Signed-off-by: Narender Kumar Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic.h | 2 ++ drivers/net/netxen/netxen_nic_hw.c | 6 +++--- drivers/net/netxen/netxen_nic_main.c | 4 +++- 3 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index 7384f59df615..e1237b802872 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -1163,6 +1163,8 @@ struct netxen_adapter { u32 int_vec_bit; u32 heartbit; + u8 mac_addr[ETH_ALEN]; + struct netxen_adapter_stats stats; struct netxen_recv_context recv_ctx; diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index e2c4a0192ea1..52a3798d8d94 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -463,7 +463,7 @@ netxen_nic_enable_mcast_filter(struct netxen_adapter *adapter) { u32 val = 0; u16 port = adapter->physical_port; - u8 *addr = adapter->netdev->dev_addr; + u8 *addr = adapter->mac_addr; if (adapter->mc_enabled) return 0; @@ -492,7 +492,7 @@ netxen_nic_disable_mcast_filter(struct netxen_adapter *adapter) { u32 val = 0; u16 port = adapter->physical_port; - u8 *addr = adapter->netdev->dev_addr; + u8 *addr = adapter->mac_addr; if (!adapter->mc_enabled) return 0; @@ -687,7 +687,7 @@ void netxen_p3_nic_set_multi(struct net_device *netdev) list_splice_tail_init(&adapter->mac_list, &del_list); - nx_p3_nic_add_mac(adapter, netdev->dev_addr, &del_list); + nx_p3_nic_add_mac(adapter, adapter->mac_addr, &del_list); nx_p3_nic_add_mac(adapter, bcast_addr, &del_list); if (netdev->flags & IFF_PROMISC) { diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 0b4a56a8c8d5..3bf78dbfbf0f 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -437,6 +437,7 @@ netxen_read_mac_addr(struct netxen_adapter *adapter) netdev->dev_addr[i] = *(p + 5 - i); memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); + memcpy(adapter->mac_addr, netdev->dev_addr, netdev->addr_len); /* set station address */ @@ -459,6 +460,7 @@ int netxen_nic_set_mac(struct net_device *netdev, void *p) netxen_napi_disable(adapter); } + memcpy(adapter->mac_addr, addr->sa_data, netdev->addr_len); memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); adapter->macaddr_set(adapter, addr->sa_data); @@ -956,7 +958,7 @@ netxen_nic_up(struct netxen_adapter *adapter, struct net_device *netdev) return err; } if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) - adapter->macaddr_set(adapter, netdev->dev_addr); + adapter->macaddr_set(adapter, adapter->mac_addr); adapter->set_multi(netdev); adapter->set_mtu(adapter, netdev->mtu); From 81065518eda14ebbce1b48c98d5077b0a059d4a3 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 18 Nov 2009 10:01:00 +0100 Subject: [PATCH 589/743] [ARM] pxa/spitz: fix compile regression on spitz If CONFIG_AKITA is not set, spitz fails to compile. It worked ok in rc5. Fix is one more ifdef... Signed-off-by: Pavel Machek Acked-by: Stanislav Brabec Signed-off-by: Eric Miao --- arch/arm/mach-pxa/spitz.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 3da45d051743..d98023f55503 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -802,10 +802,12 @@ static void __init spitz_init(void) { spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON; +#ifdef CONFIG_MACH_BORZOI if (machine_is_borzoi()) { sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt; sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo; } +#endif platform_scoop_config = &spitz_pcmcia_config; From cefbf4ea629427af2fb4709bab9fe126dcddc234 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 22 Nov 2009 17:40:28 +0000 Subject: [PATCH 590/743] MAINTAINERS: add maintainer information for AMBA primecell drivers Signed-off-by: Russell King --- MAINTAINERS | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index c824b4d62754..e9fcac2cf1a8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -512,10 +512,32 @@ W: http://www.arm.linux.org.uk/ S: Maintained F: arch/arm/ +ARM PRIMECELL AACI PL041 DRIVER +M: Russell King +S: Maintained +F: sound/arm/aaci.* + +ARM PRIMECELL CLCD PL110 DRIVER +M: Russell King +S: Maintained +F: drivers/video/amba-clcd.* + +ARM PRIMECELL KMI PL050 DRIVER +M: Russell King +S: Maintained +F: drivers/input/serio/ambakmi.* +F: include/linux/amba/kmi.h + ARM PRIMECELL MMCI PL180/1 DRIVER S: Orphan F: drivers/mmc/host/mmci.* +ARM PRIMECELL BUS SUPPORT +M: Russell King +S: Maintained +F: drivers/amba/ +F: include/linux/amba/bus.h + ARM/ADI ROADRUNNER MACHINE SUPPORT M: Lennert Buytenhek L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) From 56adf7e8127d601b172e180b44551ce83404348f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 22 Nov 2009 12:10:10 -0700 Subject: [PATCH 591/743] shdma: fix initialization error handling 1/ Error handling code following a kzalloc should free the allocated data. 2/ Report an error when no platform data is detected Both problems fixed by moving the platform data check before the allocation, and allows a goto to be killed. Reported-by: Julia Lawall Acked-by: Julia Lawall Signed-off-by: Dan Williams --- drivers/dma/shdma.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index b3b065c4e5c1..034ecf0ace03 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -640,17 +640,16 @@ static int __init sh_dmae_probe(struct platform_device *pdev) #endif struct sh_dmae_device *shdev; + /* get platform data */ + if (!pdev->dev.platform_data) + return -ENODEV; + shdev = kzalloc(sizeof(struct sh_dmae_device), GFP_KERNEL); if (!shdev) { dev_err(&pdev->dev, "No enough memory\n"); - err = -ENOMEM; - goto shdev_err; + return -ENOMEM; } - /* get platform data */ - if (!pdev->dev.platform_data) - goto shdev_err; - /* platform data */ memcpy(&shdev->pdata, pdev->dev.platform_data, sizeof(struct sh_dmae_pdata)); @@ -722,7 +721,6 @@ eirq_err: rst_err: kfree(shdev); -shdev_err: return err; } From 63edaf647607795a065e6956a79c47f500dc8447 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 22 Nov 2009 20:40:52 -0800 Subject: [PATCH 592/743] Au1x00: fix crash when trying register_netdev() Andreas Lohre reported that the driver crashes when trying to register_netdev(), he sugessted to move dev->netdev_ops initialization before calling register_netdev(), it worked for him. Reported-by: Andreas Lohre Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller --- drivers/net/au1000_eth.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index ce6f1ac25df8..3f4b4300f533 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -1088,7 +1088,14 @@ static struct net_device * au1000_probe(int port_num) return NULL; } - if ((err = register_netdev(dev)) != 0) { + dev->base_addr = base; + dev->irq = irq; + dev->netdev_ops = &au1000_netdev_ops; + SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops); + dev->watchdog_timeo = ETH_TX_TIMEOUT; + + err = register_netdev(dev); + if (err != 0) { printk(KERN_ERR "%s: Cannot register net device, error %d\n", DRV_NAME, err); free_netdev(dev); @@ -1209,12 +1216,6 @@ static struct net_device * au1000_probe(int port_num) aup->tx_db_inuse[i] = pDB; } - dev->base_addr = base; - dev->irq = irq; - dev->netdev_ops = &au1000_netdev_ops; - SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops); - dev->watchdog_timeo = ETH_TX_TIMEOUT; - /* * The boot code uses the ethernet controller, so reset it to start * fresh. au1000_init() expects that the device is in reset state. From 8fa539bd911e8a7faa7cd77b5192229c9666d9b8 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 23 Nov 2009 13:37:23 +0100 Subject: [PATCH 593/743] netfilter: xt_limit: fix invalid return code in limit_mt_check() Commit acc738fe (netfilter: xtables: avoid pointer to self) introduced an invalid return value in limit_mt_check(). Signed-off-by: Patrick McHardy --- net/netfilter/xt_limit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_limit.c b/net/netfilter/xt_limit.c index 2e8089ecd0af..2773be6a71dd 100644 --- a/net/netfilter/xt_limit.c +++ b/net/netfilter/xt_limit.c @@ -112,7 +112,7 @@ static bool limit_mt_check(const struct xt_mtchk_param *par) priv = kmalloc(sizeof(*priv), GFP_KERNEL); if (priv == NULL) - return -ENOMEM; + return false; /* For SMP, we only want to use one set of state. */ r->master = priv; From 50b6bce59d154b5db137907a5c0ed45a4e7a3829 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 23 Nov 2009 13:11:53 +0000 Subject: [PATCH 594/743] ASoC: Fix suspend with active audio streams When we get a stream suspend event force the power down since otherwise the stream would remain marked as active. In future we'll probably want to make this stream-specific and add an interface to make the power down of other widgets optional in order to support leaving bypass paths active while suspending the processor. Cc: stable@kernel.org Reported-by: Joonyoung Shim Tested-by: Joonyoung Shim Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index d89f6dc00908..66d4c165f99b 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -973,9 +973,19 @@ static int dapm_power_widgets(struct snd_soc_codec *codec, int event) if (!w->power_check) continue; - power = w->power_check(w); - if (power) - sys_power = 1; + /* If we're suspending then pull down all the + * power. */ + switch (event) { + case SND_SOC_DAPM_STREAM_SUSPEND: + power = 0; + break; + + default: + power = w->power_check(w); + if (power) + sys_power = 1; + break; + } if (w->power == power) continue; @@ -999,8 +1009,12 @@ static int dapm_power_widgets(struct snd_soc_codec *codec, int event) case SND_SOC_DAPM_STREAM_RESUME: sys_power = 1; break; + case SND_SOC_DAPM_STREAM_SUSPEND: + sys_power = 0; + break; case SND_SOC_DAPM_STREAM_NOP: sys_power = codec->bias_level != SND_SOC_BIAS_STANDBY; + break; default: break; } From 87c687be055e67bc04189ce476690be73d16063e Mon Sep 17 00:00:00 2001 From: Len Brown Date: Mon, 23 Nov 2009 11:44:12 -0500 Subject: [PATCH 595/743] ACPI: DMI init_set_sci_en_on_resume for HP-Compaq C700 ...else ACPI thermal controls fail after resume. http://bugzilla.kernel.org/show_bug.cgi?id=13745 Signed-off-by: Len Brown --- drivers/acpi/sleep.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 4cc1b8116e76..5f2c379ab7bf 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -430,6 +430,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { }, { .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard Compaq Presario C700 Notebook PC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario C700 Notebook PC"), + }, + }, + { + .callback = init_set_sci_en_on_resume, .ident = "Hewlett-Packard Compaq Presario CQ40 Notebook PC", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), From 3336f4f08e0dad7a2b6493c80b49b685141d53ad Mon Sep 17 00:00:00 2001 From: Jean PIHET Date: Mon, 23 Nov 2009 17:03:32 +0100 Subject: [PATCH 596/743] ARM: 5793/1: ARM: Check put_user fail in do_signal when enable OABI_COMPAT Using OABI, the call to put_user in do_signal can fail causing the calling app to hang. The solution is to check if put_user fails and force the app to seg fault in that case. Tested with multiple sleeping apps/threads (using the nanosleep syscall) and suspend/resume. Signed-off-by: janboe Signed-off-by: Jean Pihet Signed-off-by: Russell King --- arch/arm/kernel/signal.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 2a573d4fea24..e7714f367eb8 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -662,8 +662,12 @@ static void do_signal(struct pt_regs *regs, int syscall) regs->ARM_sp -= 4; usp = (u32 __user *)regs->ARM_sp; - put_user(regs->ARM_pc, usp); - regs->ARM_pc = KERN_RESTART_CODE; + if (put_user(regs->ARM_pc, usp) == 0) { + regs->ARM_pc = KERN_RESTART_CODE; + } else { + regs->ARM_sp += 4; + force_sigsegv(0, current); + } #endif } } From e6e3625f3b95145bfcf421285f8f7f452a5adf7e Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Sun, 22 Nov 2009 22:58:40 +0000 Subject: [PATCH 597/743] stmmac: fixed a compilation error when use the external timer Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/stmmac/stmmac_timer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/stmmac/stmmac_timer.c b/drivers/net/stmmac/stmmac_timer.c index b838c6582077..679f61ffb1f8 100644 --- a/drivers/net/stmmac/stmmac_timer.c +++ b/drivers/net/stmmac/stmmac_timer.c @@ -63,7 +63,7 @@ int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) stmmac_rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); if (stmmac_rtc == NULL) { - pr_error("open rtc device failed\n"); + pr_err("open rtc device failed\n"); return -ENODEV; } @@ -71,7 +71,7 @@ int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) /* Periodic mode is not supported */ if ((rtc_irq_set_freq(stmmac_rtc, &stmmac_task, tm->freq) < 0)) { - pr_error("set periodic failed\n"); + pr_err("set periodic failed\n"); rtc_irq_unregister(stmmac_rtc, &stmmac_task); rtc_class_close(stmmac_rtc); return -1; From 73cfe264c27fb50d4592ef1580486bea319443ac Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Sun, 22 Nov 2009 22:59:56 +0000 Subject: [PATCH 598/743] stmmac: do not fail when the timer cannot be used. If the external timer cannot be used the driver will continue to work without mitigation. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/stmmac/stmmac_main.c | 50 +++++++++++++++++-------------- drivers/net/stmmac/stmmac_timer.h | 1 + 2 files changed, 29 insertions(+), 22 deletions(-) diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c index c2f14dc9ba28..9542995ba667 100644 --- a/drivers/net/stmmac/stmmac_main.c +++ b/drivers/net/stmmac/stmmac_main.c @@ -416,13 +416,8 @@ static void init_dma_desc_rings(struct net_device *dev) unsigned int txsize = priv->dma_tx_size; unsigned int rxsize = priv->dma_rx_size; unsigned int bfsize = priv->dma_buf_sz; - int buff2_needed = 0; - int dis_ic = 0; + int buff2_needed = 0, dis_ic = 0; -#ifdef CONFIG_STMMAC_TIMER - /* Using Timers disable interrupts on completion for the reception */ - dis_ic = 1; -#endif /* Set the Buffer size according to the MTU; * indeed, in case of jumbo we need to bump-up the buffer sizes. */ @@ -437,6 +432,11 @@ static void init_dma_desc_rings(struct net_device *dev) else bfsize = DMA_BUFFER_SIZE; +#ifdef CONFIG_STMMAC_TIMER + /* Disable interrupts on completion for the reception if timer is on */ + if (likely(priv->tm->enable)) + dis_ic = 1; +#endif /* If the MTU exceeds 8k so use the second buffer in the chain */ if (bfsize >= BUF_SIZE_8KiB) buff2_needed = 1; @@ -809,20 +809,22 @@ static void stmmac_tx(struct stmmac_priv *priv) static inline void stmmac_enable_irq(struct stmmac_priv *priv) { -#ifndef CONFIG_STMMAC_TIMER - writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA); -#else - priv->tm->timer_start(tmrate); +#ifdef CONFIG_STMMAC_TIMER + if (likely(priv->tm->enable)) + priv->tm->timer_start(tmrate); + else #endif + writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA); } static inline void stmmac_disable_irq(struct stmmac_priv *priv) { -#ifndef CONFIG_STMMAC_TIMER - writel(0, priv->dev->base_addr + DMA_INTR_ENA); -#else - priv->tm->timer_stop(); +#ifdef CONFIG_STMMAC_TIMER + if (likely(priv->tm->enable)) + priv->tm->timer_stop(); + else #endif + writel(0, priv->dev->base_addr + DMA_INTR_ENA); } static int stmmac_has_work(struct stmmac_priv *priv) @@ -1031,22 +1033,23 @@ static int stmmac_open(struct net_device *dev) } #ifdef CONFIG_STMMAC_TIMER - priv->tm = kmalloc(sizeof(struct stmmac_timer *), GFP_KERNEL); + priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL); if (unlikely(priv->tm == NULL)) { pr_err("%s: ERROR: timer memory alloc failed \n", __func__); return -ENOMEM; } priv->tm->freq = tmrate; - /* Test if the HW timer can be actually used. - * In case of failure continue with no timer. */ + /* Test if the external timer can be actually used. + * In case of failure continue without timer. */ if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) { - pr_warning("stmmaceth: cannot attach the HW timer\n"); + pr_warning("stmmaceth: cannot attach the external timer.\n"); tmrate = 0; priv->tm->freq = 0; priv->tm->timer_start = stmmac_no_timer_started; priv->tm->timer_stop = stmmac_no_timer_stopped; - } + } else + priv->tm->enable = 1; #endif /* Create and initialize the TX/RX descriptors chains. */ @@ -1322,9 +1325,11 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) /* Interrupt on completition only for the latest segment */ priv->mac_type->ops->close_tx_desc(desc); + #ifdef CONFIG_STMMAC_TIMER - /* Clean IC while using timers */ - priv->mac_type->ops->clear_tx_ic(desc); + /* Clean IC while using timer */ + if (likely(priv->tm->enable)) + priv->mac_type->ops->clear_tx_ic(desc); #endif /* To avoid raise condition */ priv->mac_type->ops->set_tx_owner(first); @@ -2028,7 +2033,8 @@ static int stmmac_suspend(struct platform_device *pdev, pm_message_t state) #ifdef CONFIG_STMMAC_TIMER priv->tm->timer_stop(); - dis_ic = 1; + if (likely(priv->tm->enable)) + dis_ic = 1; #endif napi_disable(&priv->napi); diff --git a/drivers/net/stmmac/stmmac_timer.h b/drivers/net/stmmac/stmmac_timer.h index f795cae33725..6863590d184b 100644 --- a/drivers/net/stmmac/stmmac_timer.h +++ b/drivers/net/stmmac/stmmac_timer.h @@ -26,6 +26,7 @@ struct stmmac_timer { void (*timer_start) (unsigned int new_freq); void (*timer_stop) (void); unsigned int freq; + unsigned int enable; }; /* Open the HW timer device and return 0 in case of success */ From 593f63b0be70762bd4354bde147b8e169c5a2f57 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 23 Nov 2009 01:44:37 +0000 Subject: [PATCH 599/743] pktgen: Fix device name compares Commit e6fce5b916cd7f7f7 (pktgen: multiqueue etc.) tried to relax the pktgen restriction of one device per kernel thread, adding a '@' tag to device names. Problem is we dont perform check on full pktgen device name. This allows adding many time same 'device' to pktgen thread pgset "add_device eth0@0" one session later : pgset "add_device eth0@0" (This doesnt find previous device) This consumes ~1.5 MBytes of vmalloc memory per round and also triggers this warning : [ 673.186380] proc_dir_entry 'pktgen/eth0@0' already registered [ 673.186383] Modules linked in: pktgen ixgbe ehci_hcd psmouse mdio mousedev evdev [last unloaded: pktgen] [ 673.186406] Pid: 6219, comm: bash Tainted: G W 2.6.32-rc7-03302-g41cec6f-dirty #16 [ 673.186410] Call Trace: [ 673.186417] [] warn_slowpath_common+0x7b/0xc0 [ 673.186422] [] warn_slowpath_fmt+0x41/0x50 [ 673.186426] [] proc_register+0x109/0x210 [ 673.186433] [] ? apic_timer_interrupt+0xe/0x20 [ 673.186438] [] proc_create_data+0x75/0xd0 [ 673.186444] [] pktgen_thread_write+0x568/0x640 [pktgen] [ 673.186449] [] ? pktgen_thread_write+0x0/0x640 [pktgen] [ 673.186453] [] proc_reg_write+0x84/0xc0 [ 673.186458] [] vfs_write+0xb8/0x180 [ 673.186463] [] sys_write+0x51/0x90 [ 673.186468] [] system_call_fastpath+0x16/0x1b [ 673.186470] ---[ end trace ccbb991b0a8d994d ]--- Solution to this problem is to use a odevname field (includes @ tag and suffix), instead of using netdevice name. Signed-off-by: Eric Dumazet Signed-off-by: Robert Olsson Signed-off-by: David S. Miller --- net/core/pktgen.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 6eb8d47cbf3a..54c634fab6c3 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -363,6 +363,7 @@ struct pktgen_dev { * device name (not when the inject is * started as it used to do.) */ + char odevname[32]; struct flow_state *flows; unsigned cflows; /* Concurrent flows (config) */ unsigned lflow; /* Flow length (config) */ @@ -528,7 +529,7 @@ static int pktgen_if_show(struct seq_file *seq, void *v) seq_printf(seq, " frags: %d delay: %llu clone_skb: %d ifname: %s\n", pkt_dev->nfrags, (unsigned long long) pkt_dev->delay, - pkt_dev->clone_skb, pkt_dev->odev->name); + pkt_dev->clone_skb, pkt_dev->odevname); seq_printf(seq, " flows: %u flowlen: %u\n", pkt_dev->cflows, pkt_dev->lflow); @@ -1688,13 +1689,13 @@ static int pktgen_thread_show(struct seq_file *seq, void *v) if_lock(t); list_for_each_entry(pkt_dev, &t->if_list, list) if (pkt_dev->running) - seq_printf(seq, "%s ", pkt_dev->odev->name); + seq_printf(seq, "%s ", pkt_dev->odevname); seq_printf(seq, "\nStopped: "); list_for_each_entry(pkt_dev, &t->if_list, list) if (!pkt_dev->running) - seq_printf(seq, "%s ", pkt_dev->odev->name); + seq_printf(seq, "%s ", pkt_dev->odevname); if (t->result[0]) seq_printf(seq, "\nResult: %s\n", t->result); @@ -1994,7 +1995,7 @@ static void pktgen_setup_inject(struct pktgen_dev *pkt_dev) "queue_map_min (zero-based) (%d) exceeds valid range " "[0 - %d] for (%d) queues on %s, resetting\n", pkt_dev->queue_map_min, (ntxq ?: 1) - 1, ntxq, - pkt_dev->odev->name); + pkt_dev->odevname); pkt_dev->queue_map_min = ntxq - 1; } if (pkt_dev->queue_map_max >= ntxq) { @@ -2002,7 +2003,7 @@ static void pktgen_setup_inject(struct pktgen_dev *pkt_dev) "queue_map_max (zero-based) (%d) exceeds valid range " "[0 - %d] for (%d) queues on %s, resetting\n", pkt_dev->queue_map_max, (ntxq ?: 1) - 1, ntxq, - pkt_dev->odev->name); + pkt_dev->odevname); pkt_dev->queue_map_max = ntxq - 1; } @@ -3262,7 +3263,7 @@ static int pktgen_stop_device(struct pktgen_dev *pkt_dev) if (!pkt_dev->running) { printk(KERN_WARNING "pktgen: interface: %s is already " - "stopped\n", pkt_dev->odev->name); + "stopped\n", pkt_dev->odevname); return -EINVAL; } @@ -3464,7 +3465,7 @@ static void pktgen_xmit(struct pktgen_dev *pkt_dev) default: /* Drivers are not supposed to return other values! */ if (net_ratelimit()) pr_info("pktgen: %s xmit error: %d\n", - odev->name, ret); + pkt_dev->odevname, ret); pkt_dev->errors++; /* fallthru */ case NETDEV_TX_LOCKED: @@ -3572,7 +3573,7 @@ static struct pktgen_dev *pktgen_find_dev(struct pktgen_thread *t, if_lock(t); list_for_each_entry(p, &t->if_list, list) - if (strncmp(p->odev->name, ifname, IFNAMSIZ) == 0) { + if (strncmp(p->odevname, ifname, IFNAMSIZ) == 0) { pkt_dev = p; break; } @@ -3628,6 +3629,7 @@ static int pktgen_add_device(struct pktgen_thread *t, const char *ifname) if (!pkt_dev) return -ENOMEM; + strcpy(pkt_dev->odevname, ifname); pkt_dev->flows = vmalloc(MAX_CFLOWS * sizeof(struct flow_state)); if (pkt_dev->flows == NULL) { kfree(pkt_dev); From 9ce673d5e919966efc1ef5adf20248e6ecc62724 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Antti=20Kaijanm=C3=A4ki?= Date: Mon, 23 Nov 2009 10:54:24 -0800 Subject: [PATCH 600/743] hso: fix debug routines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Antti Kaijanmäki Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index fa4e58196c21..746839bb89ff 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -378,7 +378,7 @@ static void dbg_dump(int line_count, const char *func_name, unsigned char *buf, } #define DUMP(buf_, len_) \ - dbg_dump(__LINE__, __func__, buf_, len_) + dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_) #define DUMP1(buf_, len_) \ do { \ @@ -1527,7 +1527,7 @@ static void tiocmget_intr_callback(struct urb *urb) dev_warn(&usb->dev, "hso received invalid serial state notification\n"); DUMP(serial_state_notification, - sizeof(hso_serial_state_notifation)) + sizeof(struct hso_serial_state_notification)); } else { UART_state_bitmap = le16_to_cpu(serial_state_notification-> From dcfcb256cc23c4436691b0fe677275306699d6a1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Antti=20Kaijanm=C3=A4ki?= Date: Mon, 23 Nov 2009 10:54:47 -0800 Subject: [PATCH 601/743] hso: fix soft-lockup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix soft-lockup in hso.c which is triggered on SMP machine when modem is removed while file descriptor(s) under /dev are still open: old version called kref_put() too early which resulted in destroying hso_serial and hso_device objects which were still used later on. Signed-off-by: Antti Kaijanmäki Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 746839bb89ff..43bc3fcc0d85 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1363,7 +1363,7 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp) /* reset the rts and dtr */ /* do the actual close */ serial->open_count--; - kref_put(&serial->parent->ref, hso_serial_ref_free); + if (serial->open_count <= 0) { serial->open_count = 0; spin_lock_irq(&serial->serial_lock); @@ -1383,6 +1383,8 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp) usb_autopm_put_interface(serial->parent->interface); mutex_unlock(&serial->parent->mutex); + + kref_put(&serial->parent->ref, hso_serial_ref_free); } /* close the requested serial port */ From 9326e3614d72e40ea8d910fed829ec72c9b70798 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 1 Oct 2009 16:47:39 -0700 Subject: [PATCH 602/743] MIPS: Octeon: Fix compile error in drivers/staging/octeon/ethernet-mdio.c Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- drivers/staging/octeon/ethernet-mdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c index 42230e62a222..31a58e508924 100644 --- a/drivers/staging/octeon/ethernet-mdio.c +++ b/drivers/staging/octeon/ethernet-mdio.c @@ -170,7 +170,7 @@ static u32 cvm_oct_get_link(struct net_device *dev) return ret; } -struct const ethtool_ops cvm_oct_ethtool_ops = { +const struct ethtool_ops cvm_oct_ethtool_ops = { .get_drvinfo = cvm_oct_get_drvinfo, .get_settings = cvm_oct_get_settings, .set_settings = cvm_oct_set_settings, From aabb89d6fa4c70d77fe180ee794f857decde4010 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 3 Sep 2009 16:10:47 -0700 Subject: [PATCH 603/743] Staging: Octeon: Use symbolic values for irq numbers. In addition to being magic numbers, the irq number passed to free_irq is incorrect. We need to use the correct symbolic value instead. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- drivers/staging/octeon/ethernet-spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/octeon/ethernet-spi.c b/drivers/staging/octeon/ethernet-spi.c index 66190b0cb68f..00dc0f4bad19 100644 --- a/drivers/staging/octeon/ethernet-spi.c +++ b/drivers/staging/octeon/ethernet-spi.c @@ -317,6 +317,6 @@ void cvm_oct_spi_uninit(struct net_device *dev) cvmx_write_csr(CVMX_SPXX_INT_MSK(interface), 0); cvmx_write_csr(CVMX_STXX_INT_MSK(interface), 0); } - free_irq(8 + 46, &number_spi_ports); + free_irq(OCTEON_IRQ_RML, &number_spi_ports); } } From 13c5939e42dc11da61e00fef7f6cca2a6824a59f Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 12 Oct 2009 12:04:32 -0700 Subject: [PATCH 604/743] Staging: octeon-ethernet: Assign proper MAC addresses. Allocate MAC addresses using the same method as the bootloader. This avoids changing the MAC between bootloader and kernel operation as well as avoiding duplicates and use of addresses outside of the assigned range. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- drivers/staging/octeon/ethernet.c | 53 ++++++++++++++++++++++++------- 1 file changed, 41 insertions(+), 12 deletions(-) diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c index b8479517dce2..492c5029992d 100644 --- a/drivers/staging/octeon/ethernet.c +++ b/drivers/staging/octeon/ethernet.c @@ -111,6 +111,16 @@ MODULE_PARM_DESC(disable_core_queueing, "\n" "\tallows packets to be sent without lock contention in the packet\n" "\tscheduler resulting in some cases in improved throughput.\n"); + +/* + * The offset from mac_addr_base that should be used for the next port + * that is configured. By convention, if any mgmt ports exist on the + * chip, they get the first mac addresses, The ports controlled by + * this driver are numbered sequencially following any mgmt addresses + * that may exist. + */ +static unsigned int cvm_oct_mac_addr_offset; + /** * Periodic timer to check auto negotiation */ @@ -474,16 +484,30 @@ static int cvm_oct_common_set_mac_address(struct net_device *dev, void *addr) */ int cvm_oct_common_init(struct net_device *dev) { - static int count; - char mac[8] = { 0x00, 0x00, - octeon_bootinfo->mac_addr_base[0], - octeon_bootinfo->mac_addr_base[1], - octeon_bootinfo->mac_addr_base[2], - octeon_bootinfo->mac_addr_base[3], - octeon_bootinfo->mac_addr_base[4], - octeon_bootinfo->mac_addr_base[5] + count - }; struct octeon_ethernet *priv = netdev_priv(dev); + struct sockaddr sa; + u64 mac = ((u64)(octeon_bootinfo->mac_addr_base[0] & 0xff) << 40) | + ((u64)(octeon_bootinfo->mac_addr_base[1] & 0xff) << 32) | + ((u64)(octeon_bootinfo->mac_addr_base[2] & 0xff) << 24) | + ((u64)(octeon_bootinfo->mac_addr_base[3] & 0xff) << 16) | + ((u64)(octeon_bootinfo->mac_addr_base[4] & 0xff) << 8) | + (u64)(octeon_bootinfo->mac_addr_base[5] & 0xff); + + mac += cvm_oct_mac_addr_offset; + sa.sa_data[0] = (mac >> 40) & 0xff; + sa.sa_data[1] = (mac >> 32) & 0xff; + sa.sa_data[2] = (mac >> 24) & 0xff; + sa.sa_data[3] = (mac >> 16) & 0xff; + sa.sa_data[4] = (mac >> 8) & 0xff; + sa.sa_data[5] = mac & 0xff; + + if (cvm_oct_mac_addr_offset >= octeon_bootinfo->mac_addr_count) + printk(KERN_DEBUG "%s: Using MAC outside of the assigned range:" + " %02x:%02x:%02x:%02x:%02x:%02x\n", dev->name, + sa.sa_data[0] & 0xff, sa.sa_data[1] & 0xff, + sa.sa_data[2] & 0xff, sa.sa_data[3] & 0xff, + sa.sa_data[4] & 0xff, sa.sa_data[5] & 0xff); + cvm_oct_mac_addr_offset++; /* * Force the interface to use the POW send if always_use_pow @@ -496,14 +520,12 @@ int cvm_oct_common_init(struct net_device *dev) if (priv->queue != -1 && USE_HW_TCPUDP_CHECKSUM) dev->features |= NETIF_F_IP_CSUM; - count++; - /* We do our own locking, Linux doesn't need to */ dev->features |= NETIF_F_LLTX; SET_ETHTOOL_OPS(dev, &cvm_oct_ethtool_ops); cvm_oct_mdio_setup_device(dev); - dev->netdev_ops->ndo_set_mac_address(dev, mac); + dev->netdev_ops->ndo_set_mac_address(dev, &sa); dev->netdev_ops->ndo_change_mtu(dev, dev->mtu); /* @@ -620,6 +642,13 @@ static int __init cvm_oct_init_module(void) pr_notice("cavium-ethernet %s\n", OCTEON_ETHERNET_VERSION); + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) + cvm_oct_mac_addr_offset = 2; /* First two are the mgmt ports. */ + else if (OCTEON_IS_MODEL(OCTEON_CN56XX)) + cvm_oct_mac_addr_offset = 1; /* First one is the mgmt port. */ + else + cvm_oct_mac_addr_offset = 0; + cvm_oct_proc_initialize(); cvm_oct_rx_initialize(); cvm_oct_configure_common_hw(); From 54ab040d24904d1fa2c0a6a27936b7c56a4efb24 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 23 Nov 2009 16:15:19 -0500 Subject: [PATCH 605/743] ath9k: set ps_default as false Copied from original one-line patch here: http://bugzilla.kernel.org/show_bug.cgi?id=14267#c26 Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 52bed89063d4..43d2be9867fc 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1555,6 +1555,8 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_MESH_POINT); + hw->wiphy->ps_default = false; + hw->queues = 4; hw->max_rates = 4; hw->channel_change_time = 5000; From 45ba564d765d6165330e9bb14a197bdd348c114d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Nov 2009 11:27:30 +0100 Subject: [PATCH 606/743] rfkill: fix miscdev ops The /dev/rfkill ops don't refer to the module, so it is possible to unload the module while file descriptors are open. Fix this oversight. Reported-by: Maxim Levitsky Cc: stable@kernel.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/rfkill/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/rfkill/core.c b/net/rfkill/core.c index dbeaf2983822..7cb57ff6bafa 100644 --- a/net/rfkill/core.c +++ b/net/rfkill/core.c @@ -1188,6 +1188,7 @@ static long rfkill_fop_ioctl(struct file *file, unsigned int cmd, #endif static const struct file_operations rfkill_fops = { + .owner = THIS_MODULE, .open = rfkill_fop_open, .read = rfkill_fop_read, .write = rfkill_fop_write, From 8c2acc53fd7987493f11640e266cf7130591e764 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 23 Nov 2009 14:18:53 -0800 Subject: [PATCH 607/743] macvlan: fix gso_max_size setting gso_max_size must be set based on the value of the underlying device to support devices not using the full 64k. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 3aabfd9dd212..2490aa39804c 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -360,6 +360,7 @@ static int macvlan_init(struct net_device *dev) dev->state = (dev->state & ~MACVLAN_STATE_MASK) | (lowerdev->state & MACVLAN_STATE_MASK); dev->features = lowerdev->features & MACVLAN_FEATURES; + dev->gso_max_size = lowerdev->gso_max_size; dev->iflink = lowerdev->ifindex; dev->hard_header_len = lowerdev->hard_header_len; @@ -596,6 +597,7 @@ static int macvlan_device_event(struct notifier_block *unused, case NETDEV_FEAT_CHANGE: list_for_each_entry(vlan, &port->vlans, list) { vlan->dev->features = dev->features & MACVLAN_FEATURES; + vlan->dev->gso_max_size = dev->gso_max_size; netdev_features_change(vlan->dev); } break; From bffbc94a4d2c1769c3826fceddd2dbb75e72c80b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 23 Nov 2009 16:38:56 -0800 Subject: [PATCH 608/743] sparc64: Fix definition of VMEMMAP_SIZE. This was the cause of various boot failures on V480, V880, etc. systems. Kernel image memory was being overwritten because the vmemmap[] array was being sized to small. So if you had physical memory addresses past a certain point, the early bootup would spam all over variables in the kernel data section. The vmemmap mappings map page structs, not page struct pointers. And that was the key thinko in the macro definition. This was fixable thanks to the help, reports, and tireless patience of Hermann Lauer. Reported-by: Hermann Lauer Signed-off-by: David S. Miller --- arch/sparc/mm/init_64.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc/mm/init_64.h b/arch/sparc/mm/init_64.h index c2f772dbd556..77d1b313e344 100644 --- a/arch/sparc/mm/init_64.h +++ b/arch/sparc/mm/init_64.h @@ -45,7 +45,7 @@ extern void free_initmem(void); #define VMEMMAP_ALIGN(x) (((x)+VMEMMAP_CHUNK-1UL)&VMEMMAP_CHUNK_MASK) #define VMEMMAP_SIZE ((((1UL << MAX_PHYSADDR_BITS) >> PAGE_SHIFT) * \ - sizeof(struct page *)) >> VMEMMAP_CHUNK_SHIFT) + sizeof(struct page)) >> VMEMMAP_CHUNK_SHIFT) extern unsigned long vmemmap_table[VMEMMAP_SIZE]; #endif From 0ebf17174b4bdd99ab81c476714c91ee335fdcbf Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 5 Nov 2009 15:39:10 +1000 Subject: [PATCH 609/743] drm/radeon/kms: resume AGP by calling init. AGP resume was broken since we moved to the new init path, because we never re-enabled AGP on these systems at resume time. This patch just calls the AGP resume call which just does the reinit at resume time like the old path did. Since AGP is pretty much gpu independant I did it outside the gpu specific code. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/radeon_agp.c | 12 ++++++++++++ drivers/gpu/drm/radeon/radeon_device.c | 2 ++ 3 files changed, 15 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 757f5cd37744..224506a2f7b1 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -519,6 +519,7 @@ typedef int (*radeon_packet3_check_t)(struct radeon_cs_parser *p, * AGP */ int radeon_agp_init(struct radeon_device *rdev); +void radeon_agp_resume(struct radeon_device *rdev); void radeon_agp_fini(struct radeon_device *rdev); diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c index 23ea9955ac59..54bf49a6d676 100644 --- a/drivers/gpu/drm/radeon/radeon_agp.c +++ b/drivers/gpu/drm/radeon/radeon_agp.c @@ -237,6 +237,18 @@ int radeon_agp_init(struct radeon_device *rdev) #endif } +void radeon_agp_resume(struct radeon_device *rdev) +{ +#if __OS_HAS_AGP + int r; + if (rdev->flags & RADEON_IS_AGP) { + r = radeon_agp_init(rdev); + if (r) + dev_warn(rdev->dev, "radeon AGP reinit failed\n"); + } +#endif +} + void radeon_agp_fini(struct radeon_device *rdev) { #if __OS_HAS_AGP diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index e3f9edfa40fe..41bb76fbe734 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -688,6 +688,8 @@ int radeon_resume_kms(struct drm_device *dev) return -1; } pci_set_master(dev->pdev); + /* resume AGP if in use */ + radeon_agp_resume(rdev); radeon_resume(rdev); radeon_restore_bios_scratch_regs(rdev); fb_set_suspend(rdev->fbdev_info, 0); From 7064fef56369c9e2c6e35ff6d6b4b63d42a859ce Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 5 Nov 2009 10:12:54 -0800 Subject: [PATCH 610/743] drm: work around EDIDs with bad htotal/vtotal values We did this on the userspace side, but we need a similar fix for the kernel. Fixes LP #460664. Signed-off-by: Jesse Barnes Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index cea665d86dd3..b54ba63d506e 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -662,6 +662,12 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, return NULL; } + /* Some EDIDs have bogus h/vtotal values */ + if (mode->hsync_end > mode->htotal) + mode->htotal = mode->hsync_end + 1; + if (mode->vsync_end > mode->vtotal) + mode->vtotal = mode->vsync_end + 1; + drm_mode_set_name(mode); if (pt->misc & DRM_EDID_PT_INTERLACED) From ef63062716415d6e271815872b6c6654ffa9ac26 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 12 Nov 2009 09:37:39 +1000 Subject: [PATCH 611/743] drm/radeon/kms: fix handling of d1/d2 vga An rv515 laptop I got wouldn't startup with a montior plugged in, found the proper bug hopefully with us not turning off D2VGA here when we should. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/rv515.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 7935f793bf62..ba68c9fe90a1 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -137,8 +137,6 @@ int rv515_mc_wait_for_idle(struct radeon_device *rdev) void rv515_vga_render_disable(struct radeon_device *rdev) { - WREG32(R_000330_D1VGA_CONTROL, 0); - WREG32(R_000338_D2VGA_CONTROL, 0); WREG32(R_000300_VGA_RENDER_CONTROL, RREG32(R_000300_VGA_RENDER_CONTROL) & C_000300_VGA_VSTATUS_CNTL); } @@ -382,7 +380,6 @@ void rv515_mc_stop(struct radeon_device *rdev, struct rv515_mc_save *save) save->d2crtc_control = RREG32(R_006880_D2CRTC_CONTROL); /* Stop all video */ - WREG32(R_000330_D1VGA_CONTROL, 0); WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0); WREG32(R_000300_VGA_RENDER_CONTROL, 0); WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1); @@ -391,6 +388,8 @@ void rv515_mc_stop(struct radeon_device *rdev, struct rv515_mc_save *save) WREG32(R_006880_D2CRTC_CONTROL, 0); WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0); WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0); + WREG32(R_000330_D1VGA_CONTROL, 0); + WREG32(R_000338_D2VGA_CONTROL, 0); } void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save) @@ -404,14 +403,14 @@ void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save) WREG32(R_000328_VGA_HDP_CONTROL, save->vga_hdp_control); mdelay(1); /* Restore video state */ + WREG32(R_000330_D1VGA_CONTROL, save->d1vga_control); + WREG32(R_000338_D2VGA_CONTROL, save->d2vga_control); WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1); WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 1); WREG32(R_006080_D1CRTC_CONTROL, save->d1crtc_control); WREG32(R_006880_D2CRTC_CONTROL, save->d2crtc_control); WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0); WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0); - WREG32(R_000330_D1VGA_CONTROL, save->d1vga_control); - WREG32(R_000338_D2VGA_CONTROL, save->d2vga_control); WREG32(R_000300_VGA_RENDER_CONTROL, save->vga_render_control); } From 23115b0592bde5da249fcbdad7714c1f96a8e5f5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 12 Nov 2009 15:53:44 +1000 Subject: [PATCH 612/743] drm/radeon/kms: read back register before writing in IIO. This fixes RH bugzilla #527874. On resume the atom posting wasn't working, however vbe posting was going fine, after 2 weeks over irc, and 8 hrs with the hardware, I tracked it down to the memory device table and it access the MC registers via IIO, it appears the rv515 atom iio table might not be fully functional, so adding a readback before doing a write either provides enough delay to make things resume correctly. Thanks to Peng Huang at Red Hat for coming to Brisbane. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atom.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c index 901befe03da2..d67c42555ab9 100644 --- a/drivers/gpu/drm/radeon/atom.c +++ b/drivers/gpu/drm/radeon/atom.c @@ -107,6 +107,7 @@ static uint32_t atom_iio_execute(struct atom_context *ctx, int base, base += 3; break; case ATOM_IIO_WRITE: + (void)ctx->card->reg_read(ctx->card, CU16(base + 1)); ctx->card->reg_write(ctx->card, CU16(base + 1), temp); base += 3; break; From 0beb81ab45c67de4b3aa85faad604cff8ed133a8 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 13 Nov 2009 20:56:35 +0100 Subject: [PATCH 613/743] drm/radeon/kms: Disable TV load detect on RS400,RC410,RS480 RS400,RC410,RS480 chipset seems to report a lot of false positive with load detect on TV output. We haven't yet found a way to make load detect reliable on those chipset, thus just disable it for TV output. Would avoid user to experience phantom screen because X believe there is a monitor connected to the TV output. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index fce4c4087fda..55fecfc1f197 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -1149,6 +1149,13 @@ radeon_add_legacy_connector(struct drm_device *dev, if (ret) goto failed; radeon_connector->dac_load_detect = true; + /* RS400,RC410,RS480 chipset seems to report a lot + * of false positive on load detect, we haven't yet + * found a way to make load detect reliable on those + * chipset, thus just disable it for TV. + */ + if (rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480) + radeon_connector->dac_load_detect = false; drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.load_detect_property, 1); From a698cf34ea867efef12fc29dd63d443f0c71a53c Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 13 Nov 2009 20:56:58 +0100 Subject: [PATCH 614/743] drm: mm always protect change to unused_nodes with unused_lock spinlock unused_nodes modification needs to be protected by unused_lock spinlock. Here is an example of an usage where there is no such protection without this patch. Process 1: 1-drm_mm_pre_get(this function modify unused_nodes list) 2-spin_lock(spinlock protecting mm struct) 3-drm_mm_put_block(this function might modify unused_nodes list but doesn't protect modification with unused_lock) 4-spin_unlock(spinlock protecting mm struct) Process2: 1-drm_mm_pre_get(this function modify unused_nodes list) At this point Process1 & Process2 might both be doing modification to unused_nodes list. This patch add unused_lock protection into drm_mm_put_block to avoid such issue. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_mm.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index c861d80fd779..97dc5a4f0de4 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -103,6 +103,11 @@ static struct drm_mm_node *drm_mm_kmalloc(struct drm_mm *mm, int atomic) return child; } +/* drm_mm_pre_get() - pre allocate drm_mm_node structure + * drm_mm: memory manager struct we are pre-allocating for + * + * Returns 0 on success or -ENOMEM if allocation fails. + */ int drm_mm_pre_get(struct drm_mm *mm) { struct drm_mm_node *node; @@ -253,12 +258,14 @@ void drm_mm_put_block(struct drm_mm_node *cur) prev_node->size += next_node->size; list_del(&next_node->ml_entry); list_del(&next_node->fl_entry); + spin_lock(&mm->unused_lock); if (mm->num_unused < MM_UNUSED_TARGET) { list_add(&next_node->fl_entry, &mm->unused_nodes); ++mm->num_unused; } else kfree(next_node); + spin_unlock(&mm->unused_lock); } else { next_node->size += cur->size; next_node->start = cur->start; @@ -271,11 +278,13 @@ void drm_mm_put_block(struct drm_mm_node *cur) list_add(&cur->fl_entry, &mm->fl_entry); } else { list_del(&cur->ml_entry); + spin_lock(&mm->unused_lock); if (mm->num_unused < MM_UNUSED_TARGET) { list_add(&cur->fl_entry, &mm->unused_nodes); ++mm->num_unused; } else kfree(cur); + spin_unlock(&mm->unused_lock); } } From f82f5f3ac4de6c6b872fcbb3dec97f368e78ff58 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Thu, 12 Nov 2009 14:13:53 +0100 Subject: [PATCH 615/743] drm/radeon/kms: Report vga connector is connected according to ddc_probe On broken EDID we were reporting vga connector to be disconnected even if ddc probe did found a monitor. This patch report that the connector is connected on such case. This allow drm to add a fail safe mode (800x600 at the time of this patch) thus user can boot and later add a mode which match its monitor capabilities. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 55fecfc1f197..29763ceae3af 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -566,8 +566,9 @@ static enum drm_connector_status radeon_vga_detect(struct drm_connector *connect radeon_i2c_do_lock(radeon_connector, 0); if (!radeon_connector->edid) { - DRM_ERROR("DDC responded but not EDID found for %s\n", - drm_get_connector_name(connector)); + DRM_ERROR("%s: probed a monitor but no|invalid EDID\n", + drm_get_connector_name(connector)); + ret = connector_status_connected; } else { radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL); @@ -720,8 +721,8 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect radeon_i2c_do_lock(radeon_connector, 0); if (!radeon_connector->edid) { - DRM_ERROR("DDC responded but not EDID found for %s\n", - drm_get_connector_name(connector)); + DRM_ERROR("%s: probed a monitor but no|invalid EDID\n", + drm_get_connector_name(connector)); } else { radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL); From 79cc304f3e2fda202242036326afb2aeca486156 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 17 Nov 2009 14:08:54 -0800 Subject: [PATCH 616/743] drm: make sure page protections are updated after changing vm_flags Some architectures compute ->vm_page_prot depending on ->vm_flags, so we need to update the protections after adjusting the flags. AFAIK this only affects running X under Xen; without this patch you get lots of coloured blobs on the screen, or maybe a complete lockup. Or anything really. But that still depends on lots of out-of-tree stuff, so I don't think there are any consequences for anyone else. But it is wrong in principle. Reported-by: Jan Beulich Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 80391995bdec..e9dbb481c469 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -552,7 +552,7 @@ int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma) vma->vm_flags |= VM_RESERVED | VM_IO | VM_PFNMAP | VM_DONTEXPAND; vma->vm_ops = obj->dev->driver->gem_vm_ops; vma->vm_private_data = map->handle; - vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); + vma->vm_page_prot = pgprot_writecombine(vm_get_page_prot(vma->vm_flags)); /* Take a ref for this mapping of the object, so that the fault * handler can dereference the mmap offset's pointer to the object. From 5349ef3127c77075ff70b2014f17ae0fbcaaf199 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 4 Nov 2009 09:42:52 +0100 Subject: [PATCH 617/743] drm/fb: fix FBIOGET/PUT_VSCREENINFO pixel clock handling When the framebuffer driver does not publish detailed timing information for the current video mode, the correct value for the pixclock field is zero, not -1. Since pixclock is actually unsigned, the value -1 would be interpreted as 4294967295 picoseconds (i.e., about 4 milliseconds) by register_framebuffer() and userspace programs. This patch allows X.org's fbdev driver to work. Signed-off-by: Clemens Ladisch Tested-by: Paulius Zaleckas Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index dc8e374a0b55..65ef011fa8ba 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -599,7 +599,7 @@ int drm_fb_helper_check_var(struct fb_var_screeninfo *var, struct drm_framebuffer *fb = fb_helper->fb; int depth; - if (var->pixclock == -1 || !var->pixclock) + if (var->pixclock != 0) return -EINVAL; /* Need to resize the fb object !!! */ @@ -691,7 +691,7 @@ int drm_fb_helper_set_par(struct fb_info *info) int ret; int i; - if (var->pixclock != -1) { + if (var->pixclock != 0) { DRM_ERROR("PIXEL CLCOK SET\n"); return -EINVAL; } @@ -904,7 +904,7 @@ int drm_fb_helper_single_fb_probe(struct drm_device *dev, fb_helper->fb = fb; if (new_fb) { - info->var.pixclock = -1; + info->var.pixclock = 0; if (register_framebuffer(info) < 0) return -EINVAL; } else { From d77b81974521c82fa6fda38dfff1b491dcc62a32 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Tue, 24 Nov 2009 16:53:00 +0100 Subject: [PATCH 618/743] [CPUFREQ] Enable ACPI PDC handshake for VIA/Centaur CPUs In commit 0de51088e6a82bc8413d3ca9e28bbca2788b5b53, we introduced the use of acpi-cpufreq on VIA/Centaur CPU's by removing a vendor check for VENDOR_INTEL. However, as it turns out, at least the Nano CPU's also need the PDC (processor driver capabilities) handshake in order to activate the methods required for acpi-cpufreq. Since arch_acpi_processor_init_pdc() contains another vendor check for Intel, the PDC is not initialized on VIA CPU's. The resulting behavior of a current mainline kernel on such systems is: acpi-cpufreq loads and it indicates CPU frequency changes. However, the CPU stays at a single frequency This trivial patch ensures that init_intel_pdc() is called on Intel and VIA/Centaur CPU's alike. Signed-off-by: Harald Welte Signed-off-by: Dave Jones --- arch/x86/kernel/acpi/processor.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c index d296f4a195c9..d85d1b2432ba 100644 --- a/arch/x86/kernel/acpi/processor.c +++ b/arch/x86/kernel/acpi/processor.c @@ -79,7 +79,8 @@ void arch_acpi_processor_init_pdc(struct acpi_processor *pr) struct cpuinfo_x86 *c = &cpu_data(pr->id); pr->pdc = NULL; - if (c->x86_vendor == X86_VENDOR_INTEL) + if (c->x86_vendor == X86_VENDOR_INTEL || + c->x86_vendor == X86_VENDOR_CENTAUR) init_intel_pdc(pr, c); return; From 4e68e188411ea98e40309700cf0c89ad4469ac1d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 24 Nov 2009 13:56:39 -0800 Subject: [PATCH 619/743] sunsab: Do not set sunsab_reg.cons right before registering minors. Other Sun serial drivers do not do this, and if we keep it this way it ends up registering all serial devices as consoles rather than just the one which we explicitly register via sunserial_console_match() which uses add_preferred_console(). Signed-off-by: David S. Miller --- drivers/serial/sunsab.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index d1ad34128635..8755de8adbca 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -1116,7 +1116,6 @@ static int __init sunsab_init(void) if (!sunsab_ports) return -ENOMEM; - sunsab_reg.cons = SUNSAB_CONSOLE(); err = sunserial_register_minors(&sunsab_reg, num_channels); if (err) { kfree(sunsab_ports); From 8301d386afc55c877bafe2c6c7dc75a96ddd2838 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 24 Nov 2009 13:58:52 -0800 Subject: [PATCH 620/743] sunsu: Fix detection of SU ports which are RSC console or control. These device nodes are named "rsc-console" and "rsc-control" rather than 'serial', but the device_type property is 'serial' so we'll tip off of that for detection. Signed-off-by: David S. Miller --- drivers/serial/sunsu.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 68d262b15749..f6511a44d15b 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1517,6 +1517,10 @@ static const struct of_device_id su_match[] = { .name = "serial", .compatible = "su", }, + { + .type = "serial", + .compatible = "su", + }, {}, }; MODULE_DEVICE_TABLE(of, su_match); @@ -1548,6 +1552,12 @@ static int __init sunsu_init(void) num_uart++; } } + for_each_node_by_type(dp, "serial") { + if (of_device_is_compatible(dp, "su")) { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; + } + } if (num_uart) { err = sunserial_register_minors(&sunsu_reg, num_uart); From 4e3533d05b6e5e66d1cda27f6671251c99c62894 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 24 Nov 2009 14:03:34 -0800 Subject: [PATCH 621/743] serial: suncore: Add 'ignore_line' argument to sunserial_console_match(). This tells the logic to ignore the line match when deciding whether the device is the OpenFirmware specified console device or not. This is going to be used in the SU driver for rsc-console detection. There is probably a better way to handle this, but this is the least intrusive solution for now which we can validate won't break any other cases. Signed-off-by: David S. Miller --- drivers/serial/suncore.c | 19 ++++++++++--------- drivers/serial/suncore.h | 2 +- drivers/serial/sunsab.c | 6 ++++-- drivers/serial/sunsu.c | 3 ++- drivers/serial/sunzilog.c | 6 ++++-- 5 files changed, 21 insertions(+), 15 deletions(-) diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c index a2d4a19550ab..50d3b5e4ec73 100644 --- a/drivers/serial/suncore.c +++ b/drivers/serial/suncore.c @@ -53,20 +53,21 @@ void sunserial_unregister_minors(struct uart_driver *drv, int count) EXPORT_SYMBOL(sunserial_unregister_minors); int sunserial_console_match(struct console *con, struct device_node *dp, - struct uart_driver *drv, int line) + struct uart_driver *drv, int line, bool ignore_line) { - int off; - if (!con || of_console_device != dp) return 0; - off = 0; - if (of_console_options && - *of_console_options == 'b') - off = 1; + if (!ignore_line) { + int off = 0; - if ((line & 1) != off) - return 0; + if (of_console_options && + *of_console_options == 'b') + off = 1; + + if ((line & 1) != off) + return 0; + } con->index = line; drv->cons = con; diff --git a/drivers/serial/suncore.h b/drivers/serial/suncore.h index 042668aa602e..cab95b3fbddc 100644 --- a/drivers/serial/suncore.h +++ b/drivers/serial/suncore.h @@ -26,7 +26,7 @@ extern int sunserial_register_minors(struct uart_driver *, int); extern void sunserial_unregister_minors(struct uart_driver *, int); extern int sunserial_console_match(struct console *, struct device_node *, - struct uart_driver *, int); + struct uart_driver *, int, bool); extern void sunserial_console_termios(struct console *); #endif /* !(_SERIAL_SUN_H) */ diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index 8755de8adbca..e7215c200ecd 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -1027,10 +1027,12 @@ static int __devinit sab_probe(struct of_device *op, const struct of_device_id * goto out1; sunserial_console_match(SUNSAB_CONSOLE(), op->node, - &sunsab_reg, up[0].port.line); + &sunsab_reg, up[0].port.line, + false); sunserial_console_match(SUNSAB_CONSOLE(), op->node, - &sunsab_reg, up[1].port.line); + &sunsab_reg, up[1].port.line, + false); err = uart_add_one_port(&sunsab_reg, &up[0].port); if (err) diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index f6511a44d15b..4868b318e55e 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1468,7 +1468,8 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m up->port.ops = &sunsu_pops; sunserial_console_match(SUNSU_CONSOLE(), dp, - &sunsu_reg, up->port.line); + &sunsu_reg, up->port.line, + false); err = uart_add_one_port(&sunsu_reg, &up->port); if (err) goto out_unmap; diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index ef693ae22e7f..3242688978e5 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -1416,7 +1416,8 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m if (!keyboard_mouse) { if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node, - &sunzilog_reg, up[0].port.line)) + &sunzilog_reg, up[0].port.line, + false)) up->flags |= SUNZILOG_FLAG_IS_CONS; err = uart_add_one_port(&sunzilog_reg, &up[0].port); if (err) { @@ -1425,7 +1426,8 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m return err; } if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node, - &sunzilog_reg, up[1].port.line)) + &sunzilog_reg, up[1].port.line, + false)) up->flags |= SUNZILOG_FLAG_IS_CONS; err = uart_add_one_port(&sunzilog_reg, &up[1].port); if (err) { From 457931de3b0925dc2eb941bc7d611a509be36dff Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 24 Nov 2009 14:09:56 -0800 Subject: [PATCH 622/743] serial: suncore: Fix RSC/LOM handling in sunserial_console_termios(). RSC and LOM devices have fixed speed settings. We already had some code to match and handle "rsc" named devices on E250 systems, but we also have to handle 'rsc-console', 'rsc-control', and 'lom-console'. Also, in order to get this right regardless of what 'output-device' happens to be, explicitly pass the UART device node pointer to this routine. Signed-off-by: David S. Miller --- drivers/serial/suncore.c | 18 ++++++++++-------- drivers/serial/suncore.h | 3 ++- drivers/serial/sunhv.c | 2 +- drivers/serial/sunsab.c | 2 +- drivers/serial/sunzilog.c | 2 +- 5 files changed, 15 insertions(+), 12 deletions(-) diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c index 50d3b5e4ec73..ed7d958b0a01 100644 --- a/drivers/serial/suncore.c +++ b/drivers/serial/suncore.c @@ -77,23 +77,24 @@ int sunserial_console_match(struct console *con, struct device_node *dp, } EXPORT_SYMBOL(sunserial_console_match); -void -sunserial_console_termios(struct console *con) +void sunserial_console_termios(struct console *con, struct device_node *uart_dp) { - struct device_node *dp; - const char *od, *mode, *s; + const char *mode, *s; char mode_prop[] = "ttyX-mode"; int baud, bits, stop, cflag; char parity; - dp = of_find_node_by_path("/options"); - od = of_get_property(dp, "output-device", NULL); - if (!strcmp(od, "rsc")) { - mode = of_get_property(of_console_device, + if (!strcmp(uart_dp->name, "rsc") || + !strcmp(uart_dp->name, "rsc-console") || + !strcmp(uart_dp->name, "rsc-control")) { + mode = of_get_property(uart_dp, "ssp-console-modes", NULL); if (!mode) mode = "115200,8,n,1,-"; + } else if (!strcmp(uart_dp->name, "lom-console")) { + mode = "9600,8,n,1,-"; } else { + struct device_node *dp; char c; c = 'a'; @@ -102,6 +103,7 @@ sunserial_console_termios(struct console *con) mode_prop[3] = c; + dp = of_find_node_by_path("/options"); mode = of_get_property(dp, mode_prop, NULL); if (!mode) mode = "9600,8,n,1,-"; diff --git a/drivers/serial/suncore.h b/drivers/serial/suncore.h index cab95b3fbddc..db2057936c31 100644 --- a/drivers/serial/suncore.h +++ b/drivers/serial/suncore.h @@ -27,6 +27,7 @@ extern void sunserial_unregister_minors(struct uart_driver *, int); extern int sunserial_console_match(struct console *, struct device_node *, struct uart_driver *, int, bool); -extern void sunserial_console_termios(struct console *); +extern void sunserial_console_termios(struct console *, + struct device_node *); #endif /* !(_SERIAL_SUN_H) */ diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c index d548652dee50..d14cca7fb88d 100644 --- a/drivers/serial/sunhv.c +++ b/drivers/serial/sunhv.c @@ -566,7 +566,7 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m goto out_free_con_read_page; sunserial_console_match(&sunhv_console, op->node, - &sunhv_reg, port->line); + &sunhv_reg, port->line, false); err = uart_add_one_port(&sunhv_reg, port); if (err) diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index e7215c200ecd..d514e28d0755 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -883,7 +883,7 @@ static int sunsab_console_setup(struct console *con, char *options) printk("Console: ttyS%d (SAB82532)\n", (sunsab_reg.minor - 64) + con->index); - sunserial_console_termios(con); + sunserial_console_termios(con, to_of_device(up->port.dev)->node); switch (con->cflag & CBAUD) { case B150: baud = 150; break; diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 3242688978e5..2c7a66af4f52 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -1180,7 +1180,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options) (sunzilog_reg.minor - 64) + con->index, con->index); /* Get firmware console settings. */ - sunserial_console_termios(con); + sunserial_console_termios(con, to_of_device(up->port.dev)->node); /* Firmware console speed is limited to 150-->38400 baud so * this hackish cflag thing is OK. From 1917d17b903955b8b2903626a2e01d071a5d0ec9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 24 Nov 2009 14:11:40 -0800 Subject: [PATCH 623/743] sunsu: Pass true 'ignore_line' to console match when RSC or LOM console. Signed-off-by: David S. Miller --- drivers/serial/sunsu.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 4868b318e55e..4ee4167c662f 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1409,6 +1409,7 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m struct uart_sunsu_port *up; struct resource *rp; enum su_type type; + bool ignore_line; int err; type = su_get_type(dp); @@ -1467,9 +1468,14 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m up->port.ops = &sunsu_pops; + ignore_line = false; + if (!strcmp(dp->name, "rsc-console") || + !strcmp(dp->name, "lom-console")) + ignore_line = true; + sunserial_console_match(SUNSU_CONSOLE(), dp, &sunsu_reg, up->port.line, - false); + ignore_line); err = uart_add_one_port(&sunsu_reg, &up->port); if (err) goto out_unmap; From be24656a5e2d68bfd0744f0742c4aceef2cf44b5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 24 Nov 2009 14:12:50 -0800 Subject: [PATCH 624/743] sunsu: Use sunserial_console_termios() in sunsu_console_setup(). Be like the other Sun serial drivers otherwise the special handling of OpenFirmware options and hard-coded overrides for LOM/RSC consoles will not be handled. Signed-off-by: David S. Miller --- drivers/serial/sunsu.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 4ee4167c662f..170d3d68c8f0 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1329,11 +1329,9 @@ static void sunsu_console_write(struct console *co, const char *s, */ static int __init sunsu_console_setup(struct console *co, char *options) { + static struct ktermios dummy; + struct ktermios termios; struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; printk("Console: ttyS%d (SU)\n", (sunsu_reg.minor - 64) + co->index); @@ -1352,10 +1350,15 @@ static int __init sunsu_console_setup(struct console *co, char *options) */ spin_lock_init(&port->lock); - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); + /* Get firmware console settings. */ + sunserial_console_termios(co, to_of_device(port->dev)->node); - return uart_set_options(port, co, baud, parity, bits, flow); + memset(&termios, 0, sizeof(struct ktermios)); + termios.c_cflag = co->cflag; + port->mctrl |= TIOCM_DTR; + port->ops->set_termios(port, &termios, &dummy); + + return 0; } static struct console sunsu_console = { From 8e6c0332d5032aef2d3bc8f41771f999112c8c66 Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 24 Nov 2009 22:17:59 +0000 Subject: [PATCH 625/743] [CIFS] fix oops in cifs_lookup during net boot Fixes bugzilla.kernel.org bug number 14641 Lookup called during network boot (network root filesystem for diskless workstation) has case where nd is null in lookup. This patch fixes that in cifs_lookup. (Shirish noted that 2.6.30 and 2.6.31 stable need the same check) Signed-off-by: Shirish Pargaonkar Acked-by: Jeff Layton Tested-by: Vladimir Stavrinov CC: Stable Signed-off-by: Steve French --- fs/cifs/dir.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 627a60a6c1b1..32771f581b67 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -643,7 +643,7 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, * O_EXCL: optimize away the lookup, but don't hash the dentry. Let * the VFS handle the create. */ - if (nd->flags & LOOKUP_EXCL) { + if (nd && (nd->flags & LOOKUP_EXCL)) { d_instantiate(direntry, NULL); return 0; } @@ -675,7 +675,7 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, * reduction in network traffic in the other paths. */ if (pTcon->unix_ext) { - if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) && + if (nd && !(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) && (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open && (nd->intent.open.flags & O_CREAT)) { rc = cifs_posix_open(full_path, &newInode, nd->path.mnt, From 3e9848403ad59c53b31facb30b43ca80135ae0b9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 24 Nov 2009 14:50:53 -0800 Subject: [PATCH 626/743] pktgen: Fix netdevice unregister When multi queue compatable names are used by pktgen (eg eth0@0), we currently cannot unload a NIC driver if one of its device is currently in use. Allow pktgen_find_dev() to find pktgen devices by their suffix (netdev name) Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/pktgen.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 54c634fab6c3..6e79e96cb4f2 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -427,7 +427,7 @@ static const char version[] = static int pktgen_remove_device(struct pktgen_thread *t, struct pktgen_dev *i); static int pktgen_add_device(struct pktgen_thread *t, const char *ifname); static struct pktgen_dev *pktgen_find_dev(struct pktgen_thread *t, - const char *ifname); + const char *ifname, bool exact); static int pktgen_device_event(struct notifier_block *, unsigned long, void *); static void pktgen_run_all_threads(void); static void pktgen_reset_all_threads(void); @@ -1818,9 +1818,10 @@ static struct pktgen_dev *__pktgen_NN_threads(const char *ifname, int remove) { struct pktgen_thread *t; struct pktgen_dev *pkt_dev = NULL; + bool exact = (remove == FIND); list_for_each_entry(t, &pktgen_threads, th_list) { - pkt_dev = pktgen_find_dev(t, ifname); + pkt_dev = pktgen_find_dev(t, ifname, exact); if (pkt_dev) { if (remove) { if_lock(t); @@ -3567,13 +3568,18 @@ static int pktgen_thread_worker(void *arg) } static struct pktgen_dev *pktgen_find_dev(struct pktgen_thread *t, - const char *ifname) + const char *ifname, bool exact) { struct pktgen_dev *p, *pkt_dev = NULL; - if_lock(t); + size_t len = strlen(ifname); + if_lock(t); list_for_each_entry(p, &t->if_list, list) - if (strncmp(p->odevname, ifname, IFNAMSIZ) == 0) { + if (strncmp(p->odevname, ifname, len) == 0) { + if (p->odevname[len]) { + if (exact || p->odevname[len] != '@') + continue; + } pkt_dev = p; break; } From cea62343956c24452700c06cf028b72414c58a74 Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 24 Nov 2009 22:49:37 +0000 Subject: [PATCH 627/743] [CIFS] Duplicate data on appending to some Samba servers SMB writes are sent with a starting offset and length. When the server supports the newer SMB trans2 posix open (rather than using the SMB NTCreateX) a file can be opened with SMB_O_APPEND flag, and for that case Samba server assumes that the offset sent in SMBWriteX is unneeded since the write should go to the end of the file - which can cause problems if the write was cached (since the beginning part of a page could be written twice by the client mm). Jeff suggested that masking the flag on posix open on the client is easiest for the time being. Note that recent Samba server also had an unrelated problem with SMB NTCreateX and append (see samba bugzilla bug number 6898) which should not affect current Linux clients (unless cifs Unix Extensions are disabled). The cifs client did not send the O_APPEND flag on posix open before 2.6.29 so the fix is unneeded on early kernels. In the future, for the non-cached case (O_DIRECT, and forcedirectio mounts) it would be possible and useful to send O_APPEND on posix open (for Windows case: FILE_APPEND_DATA but not FILE_WRITE_DATA on SMB NTCreateX) but for cached writes although the vfs sets the offset to end of file it may fragment a write across pages - so we can't send O_APPEND on open (could result in sending part of a page twice). CC: Stable Reviewed-by: Shirish Pargaonkar Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/dir.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 32771f581b67..d3a6b07e3355 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -214,8 +214,6 @@ int cifs_posix_open(char *full_path, struct inode **pinode, posix_flags |= SMB_O_EXCL; if (oflags & O_TRUNC) posix_flags |= SMB_O_TRUNC; - if (oflags & O_APPEND) - posix_flags |= SMB_O_APPEND; if (oflags & O_SYNC) posix_flags |= SMB_O_SYNC; if (oflags & O_DIRECTORY) From 2f81e752da4781fc276689fc14391346d0dbbe78 Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 25 Nov 2009 00:11:31 +0000 Subject: [PATCH 628/743] [CIFS] Fix sparse warning Also update CHANGES file Signed-off-by: Steve French --- fs/cifs/CHANGES | 9 +++++++++ fs/cifs/dir.c | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 145540a316ab..094ea65afc85 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -1,3 +1,12 @@ +Version 1.61 +------------ +Fix append problem to Samba servers (files opened with O_APPEND could +have duplicated data). Fix oops in cifs_lookup. Workaround problem +mounting to OS/400 Netserve. Fix oops in cifs_get_tcp_session. +Disable use of server inode numbers when server only +partially supports them (e.g. for one server querying inode numbers on +FindFirst fails but QPathInfo queries works). + Version 1.60 ------------- Fix memory leak in reconnect. Fix oops in DFS mount error path. diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index d3a6b07e3355..1f42f772865a 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -643,7 +643,7 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, */ if (nd && (nd->flags & LOOKUP_EXCL)) { d_instantiate(direntry, NULL); - return 0; + return NULL; } /* can not grab the rename sem here since it would From d0b3b119f4d9460f3947334cf384ae69c5417360 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Tue, 24 Nov 2009 21:34:35 -0500 Subject: [PATCH 629/743] ACPICA: Silence the warning about _BIF returning the buffer _BIF was returning buffer instead of a string since day 1 of ACPI. Adding a warning for that is noble, but people don't like when someone cries wolf in a production system. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=14379 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/acpica/acpredef.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/acpica/acpredef.h b/drivers/acpi/acpica/acpredef.h index cd80d1dd1950..57bdaf6ffab1 100644 --- a/drivers/acpi/acpica/acpredef.h +++ b/drivers/acpi/acpica/acpredef.h @@ -203,8 +203,9 @@ static const union acpi_predefined_info predefined_names[] = {{"_BCT", 1, ACPI_RTYPE_INTEGER}}, {{"_BDN", 0, ACPI_RTYPE_INTEGER}}, {{"_BFS", 1, 0}}, - {{"_BIF", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (9 Int),(4 Str) */ - {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 9, ACPI_RTYPE_STRING}, 4,0}}, + {{"_BIF", 0, ACPI_RTYPE_PACKAGE} }, /* Fixed-length (9 Int),(4 Str/Buf) */ + {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 9, + ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER}, 4, 0} }, {{"_BIX", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (16 Int),(4 Str) */ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 16, ACPI_RTYPE_STRING}, 4, From 8b1edc57a617d00845806ca1fce1799c08d50920 Mon Sep 17 00:00:00 2001 From: Jerone Young Date: Thu, 27 Aug 2009 00:04:44 -0500 Subject: [PATCH 630/743] ACPI: Add Thinkpad T400, T500 to OSI(Linux) white-list acpi_osi=Linux helps the mute button work properly by sending Linux a mute key press. http://bugzilla.kernel.org/show_bug.cgi?id=13934 Signed-off-by: Jerone Young Signed-off-by: Len Brown --- drivers/acpi/blacklist.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index e56b2a7b53db..23e5a0519af5 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -224,6 +224,7 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { * _OSI(Linux) helps sound * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad R61"), * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T61"), + * T400, T500 * _OSI(Linux) has Linux specific hooks * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"), * _OSI(Linux) is a NOP: @@ -254,6 +255,22 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"), }, }, + { + .callback = dmi_enable_osi_linux, + .ident = "Lenovo ThinkPad T400", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T400"), + }, + }, + { + .callback = dmi_enable_osi_linux, + .ident = "Lenovo ThinkPad T500", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T500"), + }, + }, {} }; From 80a8d1228e90349b4514e8c925c061fa5cbcea75 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 20 Nov 2009 19:48:23 +0100 Subject: [PATCH 631/743] thinkpad-acpi: fix sign of ERESTARTSYS return The returned error should be negative Signed-off-by: Roel Kluin Acked-by: Henrique de Moraes Holschuh Signed-off-by: Andrew Morton Cc: Signed-off-by: Len Brown --- drivers/platform/x86/thinkpad_acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index d93108d148fc..03c0a56f0c8c 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -6313,7 +6313,7 @@ static int brightness_write(char *buf) * Doing it this way makes the syscall restartable in case of EINTR */ rc = brightness_set(level); - return (rc == -EINTR)? ERESTARTSYS : rc; + return (rc == -EINTR)? -ERESTARTSYS : rc; } static struct ibm_struct brightness_driver_data = { From 275014ae46871ce0ab08550fc4040f12b685813a Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 17 Nov 2009 14:07:22 -0800 Subject: [PATCH 632/743] thinkpad-acpi: fix detection of old ThinkPads There is a problem in the quirk tables used by tpacpi_is_fw_known() and tpacpi_check_outdated_fw(), which causes outdated BIOSes that are lacking the EC firmware ID DMI field to never match. This breaks module loading on, e.g. a T23 with outdated BIOS, and the module will refuse to load unless the "force_load=1" parameter is given. Fix the quirk tables so that they can also match the outdated BIOSes, which in turn will both fix the module loading, and also warn the user that he is using outdated firmware and should upgrade. This fixes a serious regression, introduced by commit e675abafcc0df38125e6e94a9ba91c92fe774f52, "thinkpad-acpi: be more strict when detecting a ThinkPad". http://bugzilla.kernel.org/show_bug.cgi?id=14597 Reported-by: Paul Kimoto Signed-off-by: Henrique de Moraes Holschuh Tested-by: Paul Kimoto Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/platform/x86/thinkpad_acpi.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 03c0a56f0c8c..a848c7e20aeb 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -1680,36 +1680,48 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv) | (__bv1) << 8 | (__bv2) } #define TPV_Q_X(__v, __bid1, __bid2, __bv1, __bv2, \ - __eid1, __eid2, __ev1, __ev2) \ + __eid, __ev1, __ev2) \ { .vendor = (__v), \ .bios = TPID(__bid1, __bid2), \ - .ec = TPID(__eid1, __eid2), \ + .ec = __eid, \ .quirks = (__ev1) << 24 | (__ev2) << 16 \ | (__bv1) << 8 | (__bv2) } #define TPV_QI0(__id1, __id2, __bv1, __bv2) \ TPV_Q(PCI_VENDOR_ID_IBM, __id1, __id2, __bv1, __bv2) +/* Outdated IBM BIOSes often lack the EC id string */ #define TPV_QI1(__id1, __id2, __bv1, __bv2, __ev1, __ev2) \ TPV_Q_X(PCI_VENDOR_ID_IBM, __id1, __id2, \ - __bv1, __bv2, __id1, __id2, __ev1, __ev2) + __bv1, __bv2, TPID(__id1, __id2), \ + __ev1, __ev2), \ + TPV_Q_X(PCI_VENDOR_ID_IBM, __id1, __id2, \ + __bv1, __bv2, TPACPI_MATCH_UNKNOWN, \ + __ev1, __ev2) +/* Outdated IBM BIOSes often lack the EC id string */ #define TPV_QI2(__bid1, __bid2, __bv1, __bv2, \ __eid1, __eid2, __ev1, __ev2) \ TPV_Q_X(PCI_VENDOR_ID_IBM, __bid1, __bid2, \ - __bv1, __bv2, __eid1, __eid2, __ev1, __ev2) + __bv1, __bv2, TPID(__eid1, __eid2), \ + __ev1, __ev2), \ + TPV_Q_X(PCI_VENDOR_ID_IBM, __bid1, __bid2, \ + __bv1, __bv2, TPACPI_MATCH_UNKNOWN, \ + __ev1, __ev2) #define TPV_QL0(__id1, __id2, __bv1, __bv2) \ TPV_Q(PCI_VENDOR_ID_LENOVO, __id1, __id2, __bv1, __bv2) #define TPV_QL1(__id1, __id2, __bv1, __bv2, __ev1, __ev2) \ TPV_Q_X(PCI_VENDOR_ID_LENOVO, __id1, __id2, \ - __bv1, __bv2, __id1, __id2, __ev1, __ev2) + __bv1, __bv2, TPID(__id1, __id2), \ + __ev1, __ev2) #define TPV_QL2(__bid1, __bid2, __bv1, __bv2, \ __eid1, __eid2, __ev1, __ev2) \ TPV_Q_X(PCI_VENDOR_ID_LENOVO, __bid1, __bid2, \ - __bv1, __bv2, __eid1, __eid2, __ev1, __ev2) + __bv1, __bv2, TPID(__eid1, __eid2), \ + __ev1, __ev2) static const struct tpacpi_quirk tpacpi_bios_version_qtable[] __initconst = { /* Numeric models ------------------ */ From 7005291706341a11c094f39a756a01c9e649e5f9 Mon Sep 17 00:00:00 2001 From: Peter Feuerer Date: Tue, 17 Nov 2009 14:07:21 -0800 Subject: [PATCH 633/743] acerhdf: return temperature in milidegree instead of degree Return temperature in milidegree instead of degree, as sysfs-api requires the temperature in milidegree. Signed-off-by: Peter Feuerer Tested-by: Borislav Petkov Cc: Andreas Mohr Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/platform/x86/acerhdf.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 0a8f735f6c4a..ab64522aaa64 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -52,7 +52,7 @@ */ #undef START_IN_KERNEL_MODE -#define DRV_VER "0.5.17" +#define DRV_VER "0.5.18" /* * According to the Atom N270 datasheet, @@ -61,7 +61,7 @@ * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So, * assume 89°C is critical temperature. */ -#define ACERHDF_TEMP_CRIT 89 +#define ACERHDF_TEMP_CRIT 89000 #define ACERHDF_FAN_OFF 0 #define ACERHDF_FAN_AUTO 1 @@ -69,7 +69,7 @@ * No matter what value the user puts into the fanon variable, turn on the fan * at 80 degree Celsius to prevent hardware damage */ -#define ACERHDF_MAX_FANON 80 +#define ACERHDF_MAX_FANON 80000 /* * Maximum interval between two temperature checks is 15 seconds, as the die @@ -85,8 +85,8 @@ static int kernelmode; #endif static unsigned int interval = 10; -static unsigned int fanon = 63; -static unsigned int fanoff = 58; +static unsigned int fanon = 63000; +static unsigned int fanoff = 58000; static unsigned int verbose; static unsigned int fanstate = ACERHDF_FAN_AUTO; static char force_bios[16]; @@ -171,7 +171,7 @@ static int acerhdf_get_temp(int *temp) if (ec_read(bios_cfg->tempreg, &read_temp)) return -EINVAL; - *temp = read_temp; + *temp = read_temp * 1000; return 0; } From 865bddfbf70d9ba04638c15ef49f17b599d9bbf3 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 20 Oct 2009 13:38:04 +0000 Subject: [PATCH 634/743] Blackfin: fix suspend/resume failure with some on-chip ROMs Some Blackfin on-chip ROMs utilize some MDMA channels during the suspend and resume process, but don't clean up after themselves. So manually clear all DMA channels when resuming since no DMA could have been running at this point in time. Now Linux should be able to work regardless of any laziness on the part of the on-chip ROM or boot loader. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/bfin_dma_5xx.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 1f170216d2f9..3946aff4f414 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -225,8 +225,13 @@ int blackfin_dma_suspend(void) void blackfin_dma_resume(void) { int i; - for (i = 0; i < MAX_DMA_SUSPEND_CHANNELS; ++i) - dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map; + + for (i = 0; i < MAX_DMA_CHANNELS; ++i) { + dma_ch[i].regs->cfg = 0; + + if (i < MAX_DMA_SUSPEND_CHANNELS) + dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map; + } } #endif From 7bae2c4898dd6e1e4a8276e5c428c55a7ff01bdf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Goddard=20Rosa?= Date: Fri, 30 Oct 2009 05:57:22 -0200 Subject: [PATCH 635/743] Blackfin: fix cache Kconfig typo MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Kconfig option is "BFIN_EXTMEM_WRITETHROUGH", not "..._WRITETROUGH". Signed-off-by: André Goddard Rosa Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/cplb-mpu/cplbinit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c index f7b9cdce8239..b52c1f8c4bc0 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -38,7 +38,7 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) #ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE d_cache = CPLB_L1_CHBL; -#ifdef CONFIG_BFIN_EXTMEM_WRITETROUGH +#ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH d_cache |= CPLB_L1_AOW | CPLB_WT; #endif #endif From af5d7fc7e4d8e34bad42178f7011287e94eeb3ed Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 15 Nov 2009 18:18:41 -0500 Subject: [PATCH 636/743] Blackfin: update anomaly lists Add some recently documented anomalies (473, 474, 475, 477). Also stick a "do not edit" notice in here so people know these are copies of some master version. Signed-off-by: Mike Frysinger --- .../mach-bf518/include/mach/anomaly.h | 18 ++++++++++--- .../mach-bf527/include/mach/anomaly.h | 20 +++++++++++---- .../mach-bf533/include/mach/anomaly.h | 18 ++++++++++--- .../mach-bf537/include/mach/anomaly.h | 18 ++++++++++--- .../mach-bf538/include/mach/anomaly.h | 18 ++++++++++--- .../mach-bf548/include/mach/anomaly.h | 23 +++++++++++++---- .../mach-bf561/include/mach/anomaly.h | 25 +++++++++++++++---- 7 files changed, 109 insertions(+), 31 deletions(-) diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index e9c65390edd1..2829dd0400f1 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf518/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -70,6 +74,10 @@ #define ANOMALY_05000461 (1) /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ #define ANOMALY_05000462 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -133,5 +141,7 @@ #define ANOMALY_05000450 (0) #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index 3f9052687fa8..02040df8ec80 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -1,14 +1,18 @@ /* - * File: include/asm-blackfin/mach-bf527/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: * - Revision D, 08/14/2009; ADSP-BF526 Blackfin Processor Anomaly List - * - Revision F, 03/03/2009; ADSP-BF527 Blackfin Processor Anomaly List + * - Revision G, 08/25/2009; ADSP-BF527 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -200,6 +204,10 @@ #define ANOMALY_05000467 (1) /* PLL Latches Incorrect Settings During Reset */ #define ANOMALY_05000469 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -250,5 +258,7 @@ #define ANOMALY_05000412 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index cd83db2fb1a1..9b3f7a27714d 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf533/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -202,6 +206,10 @@ #define ANOMALY_05000443 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* These anomalies have been "phased" out of analog.com anomaly sheets and are * here to show running on older silicon just isn't feasible. @@ -349,5 +357,7 @@ #define ANOMALY_05000450 (0) #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index f091ad2d8ea8..d2c427bc6656 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf537/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -156,6 +160,10 @@ #define ANOMALY_05000443 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -202,5 +210,7 @@ #define ANOMALY_05000450 (0) #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index 26b76083e14c..d882b7e6f59b 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf538/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -128,6 +132,10 @@ #define ANOMALY_05000443 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -176,5 +184,7 @@ #define ANOMALY_05000450 (0) #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index 52b116ae522a..7d08c7524498 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf548/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -24,6 +28,8 @@ #define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) +/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */ +#define ANOMALY_05000220 (1) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ @@ -200,6 +206,14 @@ #define ANOMALY_05000466 (1) /* Possible RX data corruption when control & data EP FIFOs are accessed via the core */ #define ANOMALY_05000467 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* Access to DDR-SDRAM causes system hang under certain PLL/VR settings */ +#define ANOMALY_05000474 (1) +/* Core Hang With L2/L3 Configured in Writeback Cache Mode */ +#define ANOMALY_05000475 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -215,7 +229,6 @@ #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) -#define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000231 (0) diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index 70da495c9665..5ddc981e9937 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf561/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -213,7 +217,11 @@ /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 5) /* False Hardware Error Exception when ISR Context Is Not Restored */ -#define ANOMALY_05000281 (__SILICON_REVISION__ < 5) +/* Temporarily walk around for bug 5423 till this issue is confirmed by + * official anomaly document. It looks 05000281 still exists on bf561 + * v0.5. + */ +#define ANOMALY_05000281 (__SILICON_REVISION__ <= 5) /* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */ #define ANOMALY_05000283 (1) /* Reads Will Receive Incorrect Data under Certain Conditions */ @@ -280,6 +288,12 @@ #define ANOMALY_05000443 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* Core Hang With L2/L3 Configured in Writeback Cache Mode */ +#define ANOMALY_05000475 (__SILICON_REVISION__ < 4) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000119 (0) @@ -304,5 +318,6 @@ #define ANOMALY_05000450 (0) #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) #endif From f99e8c1d0f41011870d14d5990c65e65b123f2ef Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 3 Nov 2009 03:14:38 +0000 Subject: [PATCH 637/743] Blackfin: work around testset anomaly 05000477 Ironically, the atomic testset instruction cannot be interrupted else it will produce incorrect results. So disable interrupts to help it out. Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf561/atomic.S | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/blackfin/mach-bf561/atomic.S b/arch/blackfin/mach-bf561/atomic.S index 0261a5e751b3..f99f174b129f 100644 --- a/arch/blackfin/mach-bf561/atomic.S +++ b/arch/blackfin/mach-bf561/atomic.S @@ -19,6 +19,16 @@ \reg\().h = _corelock; .endm +.macro safe_testset addr:req, scratch:req +#if ANOMALY_05000477 + cli \scratch; + testset (\addr); + sti \scratch; +#else + testset (\addr); +#endif +.endm + /* * r0 = address of atomic data to flush and invalidate (32bit). * @@ -33,7 +43,7 @@ ENTRY(_get_core_lock) cli r0; coreslot_loadaddr p0; .Lretry_corelock: - testset (p0); + safe_testset p0, r2; if cc jump .Ldone_corelock; SSYNC(r2); jump .Lretry_corelock @@ -56,7 +66,7 @@ ENTRY(_get_core_lock_noflush) cli r0; coreslot_loadaddr p0; .Lretry_corelock_noflush: - testset (p0); + safe_testset p0, r2; if cc jump .Ldone_corelock_noflush; SSYNC(r2); jump .Lretry_corelock_noflush From a2ca78cee1c428843f6833150c7e64db05f9d668 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 3 Nov 2009 02:57:45 +0000 Subject: [PATCH 638/743] Blackfin: check for anomaly 05000475 Parts that have on-chip L2 SRAM cannot safely utilize writeback caching mode, so reject any attempts to use it. Signed-off-by: Mike Frysinger --- arch/blackfin/mach-common/arch_checks.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index 9dbafcdcf479..f2ca211a76a0 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -57,3 +57,8 @@ (!defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) && defined(CONFIG_BFIN_L2_WRITEBACK))) # error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB. #endif + +#if ANOMALY_05000475 && \ + (defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)) +# error "Anomaly 475 does not allow you to use Write Back cache with L2 or External Memory" +#endif From 46b60faf8c68a200bbccbe5bc6e51c414145b9af Mon Sep 17 00:00:00 2001 From: Jie Zhang Date: Fri, 20 Nov 2009 22:52:08 +0000 Subject: [PATCH 639/743] Blackfin: fix typo in ptrace poking Commit c014e15a2f667f9 (Blackfin: convert ptrace to new memory functions) introduced a copy & paste typo in the ptrace poke data/text handling. The access_process_vm() function call was telling it to read instead of write. Signed-off-by: Jie Zhang Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/ptrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index 0982b5d5af10..56b0ba12175f 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -315,7 +315,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case BFIN_MEM_ACCESS_CORE: case BFIN_MEM_ACCESS_CORE_ONLY: copied = access_process_vm(child, addr, &data, - to_copy, 0); + to_copy, 1); if (copied) break; From 05bad36ce7a29e1e5eaf5f730ef004effed3add4 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sat, 21 Nov 2009 19:35:58 +0100 Subject: [PATCH 640/743] Blackfin: fix memset in smp_send_reschedule() and -stop() To set zeroes the sizeof the struct should be used rather than sizeof the pointer, kzalloc does that. Signed-off-by: Roel Kluin Signed-off-by: Mike Frysinger --- arch/blackfin/mach-common/smp.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index d98585f3237d..d92b168c8328 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -276,10 +276,9 @@ void smp_send_reschedule(int cpu) if (cpu_is_offline(cpu)) return; - msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + msg = kzalloc(sizeof(*msg), GFP_ATOMIC); if (!msg) return; - memset(msg, 0, sizeof(msg)); INIT_LIST_HEAD(&msg->list); msg->type = BFIN_IPI_RESCHEDULE; @@ -305,10 +304,9 @@ void smp_send_stop(void) if (cpus_empty(callmap)) return; - msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + msg = kzalloc(sizeof(*msg), GFP_ATOMIC); if (!msg) return; - memset(msg, 0, sizeof(msg)); INIT_LIST_HEAD(&msg->list); msg->type = BFIN_IPI_CPU_STOP; From aa23531ce5fb589d941b5bd84eb258e07131826b Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Mon, 21 Sep 2009 11:51:31 +0000 Subject: [PATCH 641/743] Blackfin: fix SMP build error in start_thread() Commit d5ce528c8e46fa5afb9 (Blackfin: convert irq/process to asm-generic) incorrectly merged the smp and non-smp cases of start_thread() causing the L1 stack to be setup on the SMP port instead of the UP port. Signed-off-by: Graf Yang Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 430ae39456e8..5cc7e2e9e415 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -151,7 +151,7 @@ void start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_ regs->pc = new_ip; if (current->mm) regs->p5 = current->mm->start_data; -#ifdef CONFIG_SMP +#ifndef CONFIG_SMP task_thread_info(current)->l1_task_info.stack_start = (void *)current->mm->context.stack_start; task_thread_info(current)->l1_task_info.lowest_sp = (void *)new_sp; From 8e9e0eea9955bffbe5e5cd6355157cabddc31f17 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Wed, 11 Nov 2009 02:30:50 +0000 Subject: [PATCH 642/743] drm/i915: Fix CRT hotplug detect by checking really no channels attached For CRT hotplug detect status, we have four test results as blue channel only, green channel only, both blue and green channel, and no channel attached. Origin code only marks both blue and green channel case as connected, but ignore other possible connected states. This one trys to detect CRT by checking no channel attached case instead. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_crt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 212e22740fc1..e5051446c48e 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -262,8 +262,8 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector) } while (time_after(timeout, jiffies)); } - if ((I915_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) == - CRT_HOTPLUG_MONITOR_COLOR) + if ((I915_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) != + CRT_HOTPLUG_MONITOR_NONE) return true; return false; From ca9ab10033d190c1ede85fdf456307bdfdabf079 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 22 Nov 2009 15:40:31 +0000 Subject: [PATCH 643/743] drm/i915: Select CONFIG_SHMEM The driver requires shmfs as the backing filesystem to handle the buffer objects, so ensure it is selected if the user chooses to build our driver. Fixes: Bug 14662 - Dell E5500 kernel panic with KMS http://bugzilla.kernel.org/show_bug.cgi?id=14662 The revealing nature of the panic is the NULL function pointer dereference in read_cache_page_async(). Signed-off-by: Chris Wilson Reported-and-tested-by: Mateusz Kaduk Signed-off-by: Eric Anholt Cc: stable@kernel.org --- drivers/gpu/drm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index f831ea159291..96eddd17e050 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -92,6 +92,7 @@ config DRM_I830 config DRM_I915 tristate "i915 driver" depends on AGP_INTEL + select SHMEM select DRM_KMS_HELPER select FB_CFB_FILLRECT select FB_CFB_COPYAREA From 9faf3c1d0dab9e9f4b0cbd42bc37be515d8b8cb1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 25 Nov 2009 22:14:59 +0000 Subject: [PATCH 644/743] [ARM] Update mach-types Signed-off-by: Russell King --- arch/arm/tools/mach-types | 119 +++++++++++++++++++++++++++++++++++++- 1 file changed, 117 insertions(+), 2 deletions(-) diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 94be7bb6cb9a..07b976da6174 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Fri Sep 18 21:42:00 2009 +# Last update: Wed Nov 25 22:14:58 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -928,7 +928,7 @@ palmt5 MACH_PALMT5 PALMT5 917 palmtc MACH_PALMTC PALMTC 918 omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919 mxc30030evb MACH_MXC30030EVB MXC30030EVB 920 -rea_2d MACH_REA_2D REA_2D 921 +rea_cpu2 MACH_REA_2D REA_2D 921 eti3e524 MACH_TI3E524 TI3E524 922 ateb9200 MACH_ATEB9200 ATEB9200 923 auckland MACH_AUCKLAND AUCKLAND 924 @@ -2421,3 +2421,118 @@ liberty MACH_LIBERTY LIBERTY 2434 mh355 MACH_MH355 MH355 2435 pc7802 MACH_PC7802 PC7802 2436 gnet_sgc MACH_GNET_SGC GNET_SGC 2437 +einstein15 MACH_EINSTEIN15 EINSTEIN15 2438 +cmpd MACH_CMPD CMPD 2439 +davinci_hase1 MACH_DAVINCI_HASE1 DAVINCI_HASE1 2440 +lgeincitephone MACH_LGEINCITEPHONE LGEINCITEPHONE 2441 +ea313x MACH_EA313X EA313X 2442 +fwbd_39064 MACH_FWBD_39064 FWBD_39064 2443 +fwbd_390128 MACH_FWBD_390128 FWBD_390128 2444 +pelco_moe MACH_PELCO_MOE PELCO_MOE 2445 +minimix27 MACH_MINIMIX27 MINIMIX27 2446 +omap3_thunder MACH_OMAP3_THUNDER OMAP3_THUNDER 2447 +passionc MACH_PASSIONC PASSIONC 2448 +mx27amata MACH_MX27AMATA MX27AMATA 2449 +bgat1 MACH_BGAT1 BGAT1 2450 +buzz MACH_BUZZ BUZZ 2451 +mb9g20 MACH_MB9G20 MB9G20 2452 +yushan MACH_YUSHAN YUSHAN 2453 +lizard MACH_LIZARD LIZARD 2454 +omap3polycom MACH_OMAP3POLYCOM OMAP3POLYCOM 2455 +smdkv210 MACH_SMDKV210 SMDKV210 2456 +bravo MACH_BRAVO BRAVO 2457 +siogentoo1 MACH_SIOGENTOO1 SIOGENTOO1 2458 +siogentoo2 MACH_SIOGENTOO2 SIOGENTOO2 2459 +sm3k MACH_SM3K SM3K 2460 +acer_tempo_f900 MACH_ACER_TEMPO_F900 ACER_TEMPO_F900 2461 +sst61vc010_dev MACH_SST61VC010_DEV SST61VC010_DEV 2462 +glittertind MACH_GLITTERTIND GLITTERTIND 2463 +omap_zoom3 MACH_OMAP_ZOOM3 OMAP_ZOOM3 2464 +omap_3630sdp MACH_OMAP_3630SDP OMAP_3630SDP 2465 +cybook2440 MACH_CYBOOK2440 CYBOOK2440 2466 +torino_s MACH_TORINO_S TORINO_S 2467 +havana MACH_HAVANA HAVANA 2468 +beaumont_11 MACH_BEAUMONT_11 BEAUMONT_11 2469 +vanguard MACH_VANGUARD VANGUARD 2470 +s5pc110_draco MACH_S5PC110_DRACO S5PC110_DRACO 2471 +cartesio_two MACH_CARTESIO_TWO CARTESIO_TWO 2472 +aster MACH_ASTER ASTER 2473 +voguesv210 MACH_VOGUESV210 VOGUESV210 2474 +acm500x MACH_ACM500X ACM500X 2475 +km9260 MACH_KM9260 KM9260 2476 +nideflexg1 MACH_NIDEFLEXG1 NIDEFLEXG1 2477 +ctera_plug_io MACH_CTERA_PLUG_IO CTERA_PLUG_IO 2478 +smartq7 MACH_SMARTQ7 SMARTQ7 2479 +at91sam9g10ek2 MACH_AT91SAM9G10EK2 AT91SAM9G10EK2 2480 +asusp527 MACH_ASUSP527 ASUSP527 2481 +at91sam9g20mpm2 MACH_AT91SAM9G20MPM2 AT91SAM9G20MPM2 2482 +topasa900 MACH_TOPASA900 TOPASA900 2483 +electrum_100 MACH_ELECTRUM_100 ELECTRUM_100 2484 +mx51grb MACH_MX51GRB MX51GRB 2485 +xea300 MACH_XEA300 XEA300 2486 +htcstartrek MACH_HTCSTARTREK HTCSTARTREK 2487 +lima MACH_LIMA LIMA 2488 +csb740 MACH_CSB740 CSB740 2489 +usb_s8815 MACH_USB_S8815 USB_S8815 2490 +watson_efm_plugin MACH_WATSON_EFM_PLUGIN WATSON_EFM_PLUGIN 2491 +milkyway MACH_MILKYWAY MILKYWAY 2492 +g4evm MACH_G4EVM G4EVM 2493 +picomod6 MACH_PICOMOD6 PICOMOD6 2494 +omapl138_hawkboard MACH_OMAPL138_HAWKBOARD OMAPL138_HAWKBOARD 2495 +ip6000 MACH_IP6000 IP6000 2496 +ip6010 MACH_IP6010 IP6010 2497 +utm400 MACH_UTM400 UTM400 2498 +omap3_zybex MACH_OMAP3_ZYBEX OMAP3_ZYBEX 2499 +wireless_space MACH_WIRELESS_SPACE WIRELESS_SPACE 2500 +sx560 MACH_SX560 SX560 2501 +ts41x MACH_TS41X TS41X 2502 +elphel10373 MACH_ELPHEL10373 ELPHEL10373 2503 +rhobot MACH_RHOBOT RHOBOT 2504 +mx51_refresh MACH_MX51_REFRESH MX51_REFRESH 2505 +ls9260 MACH_LS9260 LS9260 2506 +shank MACH_SHANK SHANK 2507 +qsd8x50_st1 MACH_QSD8X50_ST1 QSD8X50_ST1 2508 +at91sam9m10ekes MACH_AT91SAM9M10EKES AT91SAM9M10EKES 2509 +hiram MACH_HIRAM HIRAM 2510 +phy3250 MACH_PHY3250 PHY3250 2511 +ea3250 MACH_EA3250 EA3250 2512 +fdi3250 MACH_FDI3250 FDI3250 2513 +whitestone MACH_WHITESTONE WHITESTONE 2514 +at91sam9263nit MACH_AT91SAM9263NIT AT91SAM9263NIT 2515 +ccmx51 MACH_CCMX51 CCMX51 2516 +ccmx51js MACH_CCMX51JS CCMX51JS 2517 +ccwmx51 MACH_CCWMX51 CCWMX51 2518 +ccwmx51js MACH_CCWMX51JS CCWMX51JS 2519 +mini6410 MACH_MINI6410 MINI6410 2520 +tiny6410 MACH_TINY6410 TINY6410 2521 +nano6410 MACH_NANO6410 NANO6410 2522 +at572d940hfnldb MACH_AT572D940HFNLDB AT572D940HFNLDB 2523 +htcleo MACH_HTCLEO HTCLEO 2524 +avp13 MACH_AVP13 AVP13 2525 +xxsvideod MACH_XXSVIDEOD XXSVIDEOD 2526 +vpnext MACH_VPNEXT VPNEXT 2527 +swarco_itc3 MACH_SWARCO_ITC3 SWARCO_ITC3 2528 +tx51 MACH_TX51 TX51 2529 +dolby_cat1021 MACH_DOLBY_CAT1021 DOLBY_CAT1021 2530 +mx28evk MACH_MX28EVK MX28EVK 2531 +phoenix260 MACH_PHOENIX260 PHOENIX260 2532 +uvaca_stork MACH_UVACA_STORK UVACA_STORK 2533 +smartq5 MACH_SMARTQ5 SMARTQ5 2534 +all3078 MACH_ALL3078 ALL3078 2535 +ctera_2bay_ds MACH_CTERA_2BAY_DS CTERA_2BAY_DS 2536 +siogentoo3 MACH_SIOGENTOO3 SIOGENTOO3 2537 +epb5000 MACH_EPB5000 EPB5000 2538 +hy9263 MACH_HY9263 HY9263 2539 +acer_tempo_m900 MACH_ACER_TEMPO_M900 ACER_TEMPO_M900 2540 +acer_tempo_dx650 MACH_ACER_TEMPO_DX900 ACER_TEMPO_DX900 2541 +acer_tempo_x960 MACH_ACER_TEMPO_X960 ACER_TEMPO_X960 2542 +acer_eten_v900 MACH_ACER_ETEN_V900 ACER_ETEN_V900 2543 +acer_eten_x900 MACH_ACER_ETEN_X900 ACER_ETEN_X900 2544 +bonnell MACH_BONNELL BONNELL 2545 +oht_mx27 MACH_OHT_MX27 OHT_MX27 2546 +htcquartz MACH_HTCQUARTZ HTCQUARTZ 2547 +davinci_dm6467tevm MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM 2548 +c3ax03 MACH_C3AX03 C3AX03 2549 +mxt_td60 MACH_MXT_TD60 MXT_TD60 2550 +esyx MACH_ESYX ESYX 2551 +bulldog MACH_BULLDOG BULLDOG 2553 From 28c1969ff887bc2a7df39272850dece01de03285 Mon Sep 17 00:00:00 2001 From: Hemant Pedanekar Date: Wed, 25 Nov 2009 15:04:54 -0800 Subject: [PATCH 645/743] ide: fix ioctl to pass requested transfer mode to ide_find_dma_mode instead of UDMA6 Currently, ide_cmd_ioctl when invoked for setting DMA transfer mode calls ide_find_dma_mode with requested mode as XFER_UDMA_6. This prevents setting DMA mode to any other value than the default (maximum) supported by the device (or UDMA6, if supported) irrespective of the actual requested transfer mode and returns error. For example, setting mode to UDMA2 using hdparm, where UDMA4 is the default transfer mode gives following error: # ./hdparm -d1 -Xudma2 /dev/hda /dev/hda:hda: UDMA/66 mode selected setting using_dma to 1 (on) hda: UDMA/66 mode selected setting xfermode to 66 (UltraDMA mode2) HDIO_DRIVE_CMD(setxfermode) failed: Invalid argument using_dma = 1 (on) This patch fixes the issue. Signed-off-by: Hemant Pedanekar Acked-by: Bartlomiej Zolnierkiewicz Acked-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/ide/ide-ioctls.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c index d3440b5010a5..6e7ae2b6cfc6 100644 --- a/drivers/ide/ide-ioctls.c +++ b/drivers/ide/ide-ioctls.c @@ -162,7 +162,7 @@ static int ide_cmd_ioctl(ide_drive_t *drive, unsigned long arg) if (tf->command == ATA_CMD_SET_FEATURES && tf->feature == SETFEATURES_XFER && tf->nsect >= XFER_SW_DMA_0) { - xfer_rate = ide_find_dma_mode(drive, XFER_UDMA_6); + xfer_rate = ide_find_dma_mode(drive, tf->nsect); if (xfer_rate != tf->nsect) { err = -EINVAL; goto abort; From 46a965462a1c568a7cd7dc338de4a0afa5ce61c5 Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Wed, 25 Nov 2009 22:28:20 -0800 Subject: [PATCH 646/743] Input: keyboard - fix braille keyboard keysym generation Keysyms stored in key_map[] are not simply K() values, but U(K()) values, as can be seen in the KDSKBENT ioctl handler. The kernel-generated braille keysyms thus need a U() call too. Signed-off-by: Samuel Thibault Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- drivers/char/keyboard.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index 737be953cc58..950837cf9e9c 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -1249,7 +1249,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw) if (keycode >= NR_KEYS) if (keycode >= KEY_BRL_DOT1 && keycode <= KEY_BRL_DOT8) - keysym = K(KT_BRL, keycode - KEY_BRL_DOT1 + 1); + keysym = U(K(KT_BRL, keycode - KEY_BRL_DOT1 + 1)); else return; else From 5f5bfb09d81c9a1d26238ae6668e584c14ae3daf Mon Sep 17 00:00:00 2001 From: Michele Jr De Candia Date: Thu, 26 Nov 2009 09:22:32 +0100 Subject: [PATCH 647/743] i2c/tsl2550: Fix lux value in extended mode According to the TAOS Application Note 'Controlling a Backlight with the TSL2550 Ambient Light Sensor' (page 14), the actual lux value in extended mode should be obtained multiplying the calculated lux value by 5. Signed-off-by: Michele Jr De Candia Signed-off-by: Jean Delvare --- drivers/i2c/chips/tsl2550.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c index aa96bd2d27ea..a0702f36a72f 100644 --- a/drivers/i2c/chips/tsl2550.c +++ b/drivers/i2c/chips/tsl2550.c @@ -257,6 +257,7 @@ static DEVICE_ATTR(operating_mode, S_IWUSR | S_IRUGO, static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf) { + struct tsl2550_data *data = i2c_get_clientdata(client); u8 ch0, ch1; int ret; @@ -274,6 +275,8 @@ static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf) ret = tsl2550_calculate_lux(ch0, ch1); if (ret < 0) return ret; + if (data->operating_mode == 1) + ret *= 5; return sprintf(buf, "%d\n", ret); } From 03b70d625c10d1605012d41489d9df18467c5f55 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 26 Nov 2009 09:22:32 +0100 Subject: [PATCH 648/743] MAINTAINERS: Add missing i2c files Add missing header files to the i2c subsystem section. Signed-off-by: Jean Delvare --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index c824b4d62754..d5e8d5ad115d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2533,8 +2533,7 @@ S: Maintained F: Documentation/i2c/ F: drivers/i2c/ F: include/linux/i2c.h -F: include/linux/i2c-dev.h -F: include/linux/i2c-id.h +F: include/linux/i2c-*.h I2C-TINY-USB DRIVER M: Till Harbaum From bbd2d9c9198c6efd449e9d395b3eaf2d03aa3bba Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 26 Nov 2009 09:22:33 +0100 Subject: [PATCH 649/743] i2c: Fix userspace_device list corruption Fix userspace_device list corruption. The corruption was caused by clients not being removed when adapters with such clients were themselves removed. Something like the following would trigger it (assuming i2c-stub gets adapter number 3): # modprobe i2c-stub chip_addr=0x50 # echo 24c08 0x50 > /sys/bus/i2c/devices/i2c-3/new_device # rmmod i2c-stub # modprobe i2c-stub chip_addr=0x50 # echo 24c08 0x50 > /sys/bus/i2c/devices/i2c-3/new_device For the records, the stack trace in the kernel logs look like this: kernel: WARNING: at lib/list_debug.c:30 __list_add+0x8b/0x90() kernel: Hardware name: (...) kernel: list_add corruption. prev->next should be next (c137fc84), but was (null). (prev=f57111b8). kernel: Modules linked in: (...) kernel: Pid: 4669, comm: bash Not tainted 2.6.32-rc8 #259 kernel: Call Trace: kernel: [] ? __list_add+0x8b/0x90 kernel: [] ? __list_add+0x8b/0x90 kernel: [] warn_slowpath_common+0x6c/0xc0 kernel: [] ? __list_add+0x8b/0x90 kernel: [] warn_slowpath_fmt+0x26/0x30 kernel: [] __list_add+0x8b/0x90 kernel: [] i2c_sysfs_new_device+0x1c5/0x250 kernel: [] ? might_fault+0x2e/0x80 kernel: [] ? i2c_sysfs_new_device+0x0/0x250 kernel: [] dev_attr_store+0x25/0x30 kernel: [] sysfs_write_file+0x9c/0xf0 kernel: [] vfs_write+0x9c/0x160 kernel: [] ? sysfs_write_file+0x0/0xf0 kernel: [] sys_write+0x3d/0x70 kernel: [] sysenter_do_call+0x12/0x36 Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 8d80fceca6a4..296504355142 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -762,6 +762,7 @@ int i2c_del_adapter(struct i2c_adapter *adap) { int res = 0; struct i2c_adapter *found; + struct i2c_client *client, *next; /* First make sure that this adapter was ever added */ mutex_lock(&core_lock); @@ -781,6 +782,16 @@ int i2c_del_adapter(struct i2c_adapter *adap) if (res) return res; + /* Remove devices instantiated from sysfs */ + list_for_each_entry_safe(client, next, &userspace_devices, detected) { + if (client->adapter == adap) { + dev_dbg(&adap->dev, "Removing %s at 0x%x\n", + client->name, client->addr); + list_del(&client->detected); + i2c_unregister_device(client); + } + } + /* Detach any active clients. This can't fail, thus we do not checking the returned value. */ res = device_for_each_child(&adap->dev, NULL, __unregister_client); From 4d29196c535088e807061ce2a0aa526daec2edfb Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 26 Nov 2009 09:22:33 +0100 Subject: [PATCH 650/743] at24: Use timeout also for read Writes may take some time on EEPROMs, so for consecutive writes, we already have a loop waiting for the EEPROM to become ready. Use such a loop for reads, too, in case somebody wants to immediately read after a write. Detailed bug report and test case can be found here: http://article.gmane.org/gmane.linux.drivers.i2c/4660 Reported-by: Aleksandar Ivanov Signed-off-by: Wolfram Sang Tested-by: Aleksandar Ivanov Cc: David Brownell Signed-off-by: Jean Delvare --- drivers/misc/eeprom/at24.c | 76 ++++++++++++++++++++++---------------- 1 file changed, 45 insertions(+), 31 deletions(-) diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index db39f4a52f53..2cb2736d65aa 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -158,6 +158,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, struct i2c_msg msg[2]; u8 msgbuf[2]; struct i2c_client *client; + unsigned long timeout, read_time; int status, i; memset(msg, 0, sizeof(msg)); @@ -183,47 +184,60 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, if (count > io_limit) count = io_limit; - /* Smaller eeproms can work given some SMBus extension calls */ if (at24->use_smbus) { + /* Smaller eeproms can work given some SMBus extension calls */ if (count > I2C_SMBUS_BLOCK_MAX) count = I2C_SMBUS_BLOCK_MAX; - status = i2c_smbus_read_i2c_block_data(client, offset, - count, buf); - dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n", - count, offset, status); - return (status < 0) ? -EIO : status; + } else { + /* + * When we have a better choice than SMBus calls, use a + * combined I2C message. Write address; then read up to + * io_limit data bytes. Note that read page rollover helps us + * here (unlike writes). msgbuf is u8 and will cast to our + * needs. + */ + i = 0; + if (at24->chip.flags & AT24_FLAG_ADDR16) + msgbuf[i++] = offset >> 8; + msgbuf[i++] = offset; + + msg[0].addr = client->addr; + msg[0].buf = msgbuf; + msg[0].len = i; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = buf; + msg[1].len = count; } /* - * When we have a better choice than SMBus calls, use a combined - * I2C message. Write address; then read up to io_limit data bytes. - * Note that read page rollover helps us here (unlike writes). - * msgbuf is u8 and will cast to our needs. + * Reads fail if the previous write didn't complete yet. We may + * loop a few times until this one succeeds, waiting at least + * long enough for one entire page write to work. */ - i = 0; - if (at24->chip.flags & AT24_FLAG_ADDR16) - msgbuf[i++] = offset >> 8; - msgbuf[i++] = offset; + timeout = jiffies + msecs_to_jiffies(write_timeout); + do { + read_time = jiffies; + if (at24->use_smbus) { + status = i2c_smbus_read_i2c_block_data(client, offset, + count, buf); + } else { + status = i2c_transfer(client->adapter, msg, 2); + if (status == 2) + status = count; + } + dev_dbg(&client->dev, "read %zu@%d --> %d (%ld)\n", + count, offset, status, jiffies); - msg[0].addr = client->addr; - msg[0].buf = msgbuf; - msg[0].len = i; + if (status == count) + return count; - msg[1].addr = client->addr; - msg[1].flags = I2C_M_RD; - msg[1].buf = buf; - msg[1].len = count; + /* REVISIT: at HZ=100, this is sloooow */ + msleep(1); + } while (time_before(read_time, timeout)); - status = i2c_transfer(client->adapter, msg, 2); - dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n", - count, offset, status); - - if (status == 2) - return count; - else if (status >= 0) - return -EIO; - else - return status; + return -ETIMEDOUT; } static ssize_t at24_read(struct at24_data *at24, From 3bf3583b6a49c318f7ed350862d7a217b500e71c Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Tue, 10 Nov 2009 00:39:12 -0500 Subject: [PATCH 651/743] [SCSI] sd: Return correct error code for DIF sd_dif.c was not updated to return -EILSEQ, leading to error handling failures in applications which provide their own integrity metadata (as opposed to being protected by the block layer functions). Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley --- drivers/scsi/sd_dif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c index 88da97745710..84be62149c6c 100644 --- a/drivers/scsi/sd_dif.c +++ b/drivers/scsi/sd_dif.c @@ -418,7 +418,7 @@ error: __func__, virt, phys, be32_to_cpu(sdt->ref_tag), be16_to_cpu(sdt->app_tag)); - return -EIO; + return -EILSEQ; } /* From 860dc73608a091e0b325218acc2701709d5f221a Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 19 Nov 2009 17:48:29 -0500 Subject: [PATCH 652/743] [SCSI] fix async scan add/remove race resulting in an oops Async scanning introduced a very wide window where the SCSI device is up and running but has not yet been added to sysfs. We delay the adding until all scans have completed to retain the same ordering as sync scanning. This delay in visibility causes an oops if a device is removed before we make it visible because the SCSI removal routines have an inbuilt assumption that if a device is in SDEV_RUNNING state, it must be visible (which is not necessarily true in the async scanning case). Fix this by introducing an additional is_visible flag which we can use to condition the tear down so we do the right thing for running but not yet made visible. Reported-by: Alexey Kuznetsov Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 18 +++-------- drivers/scsi/scsi_sysfs.c | 63 ++++++++++++++++---------------------- include/scsi/scsi_device.h | 1 + 3 files changed, 32 insertions(+), 50 deletions(-) diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 0547a7f44d42..47291bcff0d5 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -952,16 +952,6 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, return SCSI_SCAN_LUN_PRESENT; } -static inline void scsi_destroy_sdev(struct scsi_device *sdev) -{ - scsi_device_set_state(sdev, SDEV_DEL); - if (sdev->host->hostt->slave_destroy) - sdev->host->hostt->slave_destroy(sdev); - transport_destroy_device(&sdev->sdev_gendev); - put_device(&sdev->sdev_dev); - put_device(&sdev->sdev_gendev); -} - #ifdef CONFIG_SCSI_LOGGING /** * scsi_inq_str - print INQUIRY data from min to max index, strip trailing whitespace @@ -1139,7 +1129,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, } } } else - scsi_destroy_sdev(sdev); + __scsi_remove_device(sdev); out: return res; } @@ -1500,7 +1490,7 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, /* * the sdev we used didn't appear in the report luns scan */ - scsi_destroy_sdev(sdev); + __scsi_remove_device(sdev); return ret; } @@ -1710,7 +1700,7 @@ static void scsi_sysfs_add_devices(struct Scsi_Host *shost) shost_for_each_device(sdev, shost) { if (!scsi_host_scan_allowed(shost) || scsi_sysfs_add_sdev(sdev) != 0) - scsi_destroy_sdev(sdev); + __scsi_remove_device(sdev); } } @@ -1943,7 +1933,7 @@ void scsi_free_host_dev(struct scsi_device *sdev) { BUG_ON(sdev->id != sdev->host->this_id); - scsi_destroy_sdev(sdev); + __scsi_remove_device(sdev); } EXPORT_SYMBOL(scsi_free_host_dev); diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 5c7eb63a19d1..392d8db33905 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -854,82 +854,73 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev) transport_configure_device(&starget->dev); error = device_add(&sdev->sdev_gendev); if (error) { - put_device(sdev->sdev_gendev.parent); printk(KERN_INFO "error 1\n"); - return error; + goto out_remove; } error = device_add(&sdev->sdev_dev); if (error) { printk(KERN_INFO "error 2\n"); - goto clean_device; + device_del(&sdev->sdev_gendev); + goto out_remove; } + transport_add_device(&sdev->sdev_gendev); + sdev->is_visible = 1; /* create queue files, which may be writable, depending on the host */ if (sdev->host->hostt->change_queue_depth) error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_depth_rw); else error = device_create_file(&sdev->sdev_gendev, &dev_attr_queue_depth); - if (error) { - __scsi_remove_device(sdev); - goto out; - } + if (error) + goto out_remove; + if (sdev->host->hostt->change_queue_type) error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_type_rw); else error = device_create_file(&sdev->sdev_gendev, &dev_attr_queue_type); - if (error) { - __scsi_remove_device(sdev); - goto out; - } + if (error) + goto out_remove; error = bsg_register_queue(rq, &sdev->sdev_gendev, NULL, NULL); if (error) + /* we're treating error on bsg register as non-fatal, + * so pretend nothing went wrong */ sdev_printk(KERN_INFO, sdev, "Failed to register bsg queue, errno=%d\n", error); - /* we're treating error on bsg register as non-fatal, so pretend - * nothing went wrong */ - error = 0; - /* add additional host specific attributes */ if (sdev->host->hostt->sdev_attrs) { for (i = 0; sdev->host->hostt->sdev_attrs[i]; i++) { error = device_create_file(&sdev->sdev_gendev, sdev->host->hostt->sdev_attrs[i]); - if (error) { - __scsi_remove_device(sdev); - goto out; - } + if (error) + goto out_remove; } } - transport_add_device(&sdev->sdev_gendev); - out: + return 0; + + out_remove: + __scsi_remove_device(sdev); return error; - clean_device: - scsi_device_set_state(sdev, SDEV_CANCEL); - - device_del(&sdev->sdev_gendev); - transport_destroy_device(&sdev->sdev_gendev); - put_device(&sdev->sdev_dev); - put_device(&sdev->sdev_gendev); - - return error; } void __scsi_remove_device(struct scsi_device *sdev) { struct device *dev = &sdev->sdev_gendev; - if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0) - return; + if (sdev->is_visible) { + if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0) + return; - bsg_unregister_queue(sdev->request_queue); - device_unregister(&sdev->sdev_dev); - transport_remove_device(dev); - device_del(dev); + bsg_unregister_queue(sdev->request_queue); + device_unregister(&sdev->sdev_dev); + transport_remove_device(dev); + device_del(dev); + } else + put_device(&sdev->sdev_dev); scsi_device_set_state(sdev, SDEV_DEL); if (sdev->host->hostt->slave_destroy) sdev->host->hostt->slave_destroy(sdev); diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 9af48cbf0036..f097ae340bc1 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -145,6 +145,7 @@ struct scsi_device { unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */ unsigned last_sector_bug:1; /* do not use multisector accesses on SD_LAST_BUGGY_SECTORS */ + unsigned is_visible:1; /* is the device visible in sysfs */ DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */ struct list_head event_list; /* asserted events */ From 4e46bf89972b9d98a9f282a9fed2359756a5e34e Mon Sep 17 00:00:00 2001 From: Alexey Kuznetsov Date: Tue, 17 Nov 2009 14:10:11 -0800 Subject: [PATCH 653/743] [SCSI] fix crash when disconnecting usb storage __scsi_remove_device() in scsi_forget_host() is executed out of scan_mutex and races with scsi_destroy_sdev() <- scsi_sysfs_add_devices() <- scsi_finish_async_scan(). The result is use after free and/or double free, oops. The fix is simple, move scsi_forget_host() under scan_mutex. scsi_forget_host() is just sequence of __scsi_remove_device(). All another calls of __scsi_remove_device() are made under scan_mutex. So that it is safe. Signed-off-by: Alexey Kuznetsov Signed-off-by: Denis V. Lunev Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/hosts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 5fd2da494d08..c968cc31cd86 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -164,8 +164,8 @@ void scsi_remove_host(struct Scsi_Host *shost) return; } spin_unlock_irqrestore(shost->host_lock, flags); - mutex_unlock(&shost->scan_mutex); scsi_forget_host(shost); + mutex_unlock(&shost->scan_mutex); scsi_proc_host_rm(shost); spin_lock_irqsave(shost->host_lock, flags); From 3addbb8075c00e2a2408c192bd1002dead26b2aa Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 5 Nov 2009 13:26:32 -0300 Subject: [PATCH 654/743] V4L/DVB (13321): radio-gemtek-pci: fix double mutex_lock Double mutexlock found by the Linux Driver Verification project and reported by Alexander Strakh. Signed-off-by: Hans Verkuil CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-gemtek-pci.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c index c3f579de6e71..c6cf11661868 100644 --- a/drivers/media/radio/radio-gemtek-pci.c +++ b/drivers/media/radio/radio-gemtek-pci.c @@ -181,12 +181,10 @@ static void gemtek_pci_mute(struct gemtek_pci *card) static void gemtek_pci_unmute(struct gemtek_pci *card) { - mutex_lock(&card->lock); if (card->mute) { gemtek_pci_setfrequency(card, card->current_frequency); card->mute = false; } - mutex_unlock(&card->lock); } static int gemtek_pci_getsignal(struct gemtek_pci *card) From f39c1ab3c3878f1a50ca129e55d17ae63215fcbe Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 9 Nov 2009 16:11:34 -0300 Subject: [PATCH 655/743] V4L/DVB (13343): v4l: add more missing linux/sched.h includes Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mx1_camera.c | 1 + drivers/media/video/mx3_camera.c | 1 + drivers/media/video/sh_mobile_ceu_camera.c | 1 + drivers/media/video/videobuf-dma-contig.c | 1 + 4 files changed, 4 insertions(+) diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c index 5f37952c75cf..72802291e812 100644 --- a/drivers/media/video/mx1_camera.c +++ b/drivers/media/video/mx1_camera.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c index dff2e5e2d8c6..7db82bdf6f31 100644 --- a/drivers/media/video/mx3_camera.c +++ b/drivers/media/video/mx3_camera.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 2f78b4f263f5..55afe3e98e16 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c index 635ffc7b0391..c3065c4bcba9 100644 --- a/drivers/media/video/videobuf-dma-contig.c +++ b/drivers/media/video/videobuf-dma-contig.c @@ -19,6 +19,7 @@ #include #include #include +#include #include struct videobuf_dma_contig_memory { From 64ff9ba5f1d771e8405ec766c31f6b32c9708285 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 9 Nov 2009 16:12:37 -0300 Subject: [PATCH 656/743] V4L/DVB (13344): soc-camera: properly initialise the device object when reusing Commit ef373189f62413803b7b816c972fc154c488cdc0 "fix use-after-free Oops, resulting from a driver-core API change" fixed the Oops, but didn't correct missing device object initialisation. This patch makes unloading and reloading of soc-camera host- and client-drivers possible again. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/soc_camera.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index 36e617bd13c7..95fdeb23c2c1 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -1097,6 +1097,13 @@ static int default_s_crop(struct soc_camera_device *icd, struct v4l2_crop *a) return v4l2_subdev_call(sd, video, s_crop, a); } +static void soc_camera_device_init(struct device *dev, void *pdata) +{ + dev->platform_data = pdata; + dev->bus = &soc_camera_bus_type; + dev->release = dummy_release; +} + int soc_camera_host_register(struct soc_camera_host *ici) { struct soc_camera_host *ix; @@ -1158,6 +1165,7 @@ void soc_camera_host_unregister(struct soc_camera_host *ici) list_for_each_entry(icd, &devices, list) { if (icd->iface == ici->nr) { + void *pdata = icd->dev.platform_data; /* The bus->remove will be called */ device_unregister(&icd->dev); /* @@ -1169,6 +1177,7 @@ void soc_camera_host_unregister(struct soc_camera_host *ici) * device private data. */ memset(&icd->dev, 0, sizeof(icd->dev)); + soc_camera_device_init(&icd->dev, pdata); } } @@ -1200,10 +1209,7 @@ static int soc_camera_device_register(struct soc_camera_device *icd) * man, stay reasonable... */ return -ENOMEM; - icd->devnum = num; - icd->dev.bus = &soc_camera_bus_type; - - icd->dev.release = dummy_release; + icd->devnum = num; icd->use_count = 0; icd->host_priv = NULL; mutex_init(&icd->video_lock); @@ -1311,12 +1317,13 @@ static int __devinit soc_camera_pdrv_probe(struct platform_device *pdev) icd->iface = icl->bus_id; icd->pdev = &pdev->dev; platform_set_drvdata(pdev, icd); - icd->dev.platform_data = icl; ret = soc_camera_device_register(icd); if (ret < 0) goto escdevreg; + soc_camera_device_init(&icd->dev, icl); + icd->user_width = DEFAULT_WIDTH; icd->user_height = DEFAULT_HEIGHT; From 055e05a08b462feabbd6b7a33fd2b9f1f23d4476 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 9 Nov 2009 16:13:24 -0300 Subject: [PATCH 657/743] V4L/DVB (13345): soc-camera: sh_mobile_ceu_camera: call pm_runtime_disable pm_runtime_disable is needed if it failed or removed Signed-off-by: Kuninori Morimoto Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/sh_mobile_ceu_camera.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 55afe3e98e16..afdea0d26fc6 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -1724,10 +1724,12 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev) err = soc_camera_host_register(&pcdev->ici); if (err) - goto exit_free_irq; + goto exit_free_clk; return 0; +exit_free_clk: + pm_runtime_disable(&pdev->dev); exit_free_irq: free_irq(pcdev->irq, pcdev); exit_release_mem: @@ -1748,6 +1750,7 @@ static int __devexit sh_mobile_ceu_remove(struct platform_device *pdev) struct sh_mobile_ceu_dev, ici); soc_camera_host_unregister(soc_host); + pm_runtime_disable(&pdev->dev); free_irq(pcdev->irq, pcdev); if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) dma_release_declared_memory(&pdev->dev); From 28f4ddd1e8e341907d8f4f4b9ebf9f441f30420a Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Sun, 4 Oct 2009 12:59:35 -0300 Subject: [PATCH 658/743] V4L/DVB (13366): em28xx: fix Reddo DVB-C USB TV Box GPIO Set device GPIOs only once. There is no need for .dvb_gpio to select between analog and digital because device is digital only. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index bdb249bd9d5d..c0fd5c6feeac 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1584,8 +1584,8 @@ struct em28xx_board em28xx_boards[] = { [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { .name = "Reddo DVB-C USB TV Box", .tuner_type = TUNER_ABSENT, + .tuner_gpio = reddo_dvb_c_usb_box, .has_dvb = 1, - .dvb_gpio = reddo_dvb_c_usb_box, }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); From 934949d816004ff66e21adbab225e9cb7f20015a Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 9 Nov 2009 09:05:11 -0300 Subject: [PATCH 659/743] V4L/DVB (13371): davinci: remove stray duplicate config pointer The vpif_config struct was renamed to vpif_display_config, but there is still a stray vpif_config *config pointer in vpif_display.c, preventing it from compiling. Remove this old duplicate pointer. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpif_display.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index c015da813dda..d14cfb200ed0 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -1426,7 +1426,6 @@ static __init int vpif_probe(struct platform_device *pdev) struct vpif_display_config *config; int i, j = 0, k, q, m, err = 0; struct i2c_adapter *i2c_adap; - struct vpif_config *config; struct common_obj *common; struct channel_obj *ch; struct video_device *vfd; From 4b3fa3c486f53ff267505b115ebf611726217da8 Mon Sep 17 00:00:00 2001 From: Olivier Lorin Date: Sat, 3 Oct 2009 19:09:10 -0300 Subject: [PATCH 660/743] V4L/DVB (13372a): MAINTAINERS: addition of gspca_gl860 driver MAINTAINERS: addition of gspca_gl860 driver - addition of gspca_gl860 driver Signed-off-by: Olivier Lorin Signed-off-by: Mauro Carvalho Chehab --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index c824b4d62754..4982eb0baed1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2312,6 +2312,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: drivers/media/video/gspca/finepix.c +GSPCA GL860 SUBDRIVER +M: Olivier Lorin +L: linux-media@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +S: Maintained +F: drivers/media/video/gspca/gl860/ + GSPCA M5602 SUBDRIVER M: Erik Andren L: linux-media@vger.kernel.org From 1b7323965a8c6eee9dc4e345a7ae4bff1dc93149 Mon Sep 17 00:00:00 2001 From: Csaba Henk Date: Fri, 27 Nov 2009 19:30:14 +0530 Subject: [PATCH 661/743] fuse: reject O_DIRECT flag also in fuse_create The comment in fuse_open about O_DIRECT: "VFS checks this, but only _after_ ->open()" also holds for fuse_create, however, the same kind of check was missing there. As an impact of this bug, open(newfile, O_RDWR|O_CREAT|O_DIRECT) fails, but a stub newfile will remain if the fuse server handled the implied FUSE_CREATE request appropriately. Other impact: in the above situation ima_file_free() will complain to open/free imbalance if CONFIG_IMA is set. Signed-off-by: Csaba Henk Signed-off-by: Miklos Szeredi Cc: Harshavardhana Cc: stable@kernel.org --- fs/fuse/dir.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 8ada78aade58..4787ae6c5c1c 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -385,6 +385,9 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry, int mode, if (fc->no_create) return -ENOSYS; + if (flags & O_DIRECT) + return -EINVAL; + forget_req = fuse_get_req(fc); if (IS_ERR(forget_req)) return PTR_ERR(forget_req); From e9ff5eb2ae018fe2298c68746c873bf828c6b10e Mon Sep 17 00:00:00 2001 From: Anuj Aggarwal Date: Fri, 27 Nov 2009 17:40:58 +0530 Subject: [PATCH 662/743] ASoC: AIC23: Fixing infinite loop in resume path This patch fixes two issues: a) Infinite loop in resume function b) Writes to non-existing registers in resume function Cc: stable@kernel.org Signed-off-by: Anuj Aggarwal Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/codecs/tlv320aic23.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c index 6b24d8bb02bb..90a0264f7538 100644 --- a/sound/soc/codecs/tlv320aic23.c +++ b/sound/soc/codecs/tlv320aic23.c @@ -625,11 +625,10 @@ static int tlv320aic23_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); struct snd_soc_codec *codec = socdev->card->codec; - int i; u16 reg; /* Sync reg_cache with the hardware */ - for (reg = 0; reg < ARRAY_SIZE(tlv320aic23_reg); i++) { + for (reg = 0; reg < TLV320AIC23_RESET; reg++) { u16 val = tlv320aic23_read_reg_cache(codec, reg); tlv320aic23_write(codec, reg, val); } From d02b217a719a8c4debf66ea81ea1b95dbb00e265 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 20 Nov 2009 16:16:52 -0300 Subject: [PATCH 663/743] V4L/DVB (13412): SMS_SIANO_MDTV should depend on HAS_DMA When building for Sun 3: drivers/built-in.o: In function `smscore_unregister_device': drivers/media/dvb/siano/smscoreapi.c:723: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `smscore_register_device': drivers/media/dvb/siano/smscoreapi.c:365: undefined reference to `dma_alloc_coherent' Signed-off-by: Geert Uytterhoeven Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/siano/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/siano/Kconfig b/drivers/media/dvb/siano/Kconfig index 8c1aed77ea30..85a222c4eaa0 100644 --- a/drivers/media/dvb/siano/Kconfig +++ b/drivers/media/dvb/siano/Kconfig @@ -4,7 +4,7 @@ config SMS_SIANO_MDTV tristate "Siano SMS1xxx based MDTV receiver" - depends on DVB_CORE && INPUT + depends on DVB_CORE && INPUT && HAS_DMA ---help--- Choose Y or M here if you have MDTV receiver with a Siano chipset. From 0bc3518019f917a370935055f07698a4e9b3ea20 Mon Sep 17 00:00:00 2001 From: Robert Lowery Date: Sun, 8 Nov 2009 00:00:11 -0300 Subject: [PATCH 664/743] V4L/DVB (13436): cxusb: Fix hang on DViCO FusionHDTV DVB-T Dual Digital 4 (rev 1) Address yet another regression introduced by the introduction of the zl10353 disable_i2c_gate field. djh - I unmangled the patch which apparently got screwed up in the user's email client. Signed-off-by: Robert Lowery Signed-off-by: Devin Heitmueller CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/cxusb.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index f65591fb7cec..2a53dd096eef 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -663,6 +663,14 @@ static struct zl10353_config cxusb_zl10353_xc3028_config = { .parallel_ts = 1, }; +static struct zl10353_config cxusb_zl10353_xc3028_config_no_i2c_gate = { + .demod_address = 0x0f, + .if2 = 45600, + .no_tuner = 1, + .parallel_ts = 1, + .disable_i2c_gate_ctrl = 1, +}; + static struct mt352_config cxusb_mt352_xc3028_config = { .demod_address = 0x0f, .if2 = 4560, @@ -894,7 +902,7 @@ static int cxusb_dualdig4_frontend_attach(struct dvb_usb_adapter *adap) cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); if ((adap->fe = dvb_attach(zl10353_attach, - &cxusb_zl10353_xc3028_config, + &cxusb_zl10353_xc3028_config_no_i2c_gate, &adap->dev->i2c_adap)) == NULL) return -EIO; From 9807362e4768cf807c9cfad3c10243020365d1ce Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 25 Nov 2009 14:32:57 -0300 Subject: [PATCH 665/743] V4L/DVB (13481): sh_mobile_ceu_camera: fix compile warning Trivial fix for this compile warning: v4l/sh_mobile_ceu_camera.c:1789: warning: label 'exit_free_irq' defined but not used Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/sh_mobile_ceu_camera.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index afdea0d26fc6..9c8b7c7b89ee 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -1730,7 +1730,6 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev) exit_free_clk: pm_runtime_disable(&pdev->dev); -exit_free_irq: free_irq(pcdev->irq, pcdev); exit_release_mem: if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) From 361c95119a60adb7f84946af648b7c87cdc55e17 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 26 Nov 2009 12:22:11 -0300 Subject: [PATCH 666/743] V4L/DVB (13530): Fix wrong parameter order in memset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Edwin Török found the following: In function ‘memset’, inlined from ‘ir_input_init’ at drivers/media/common/ir-functions.c:67: /home/edwin/builds/linux-2.6/arch/x86/include/asm/string_64.h:61: warning: call to ‘__warn_memset_zero_len’ declared with attribute warning: memset used with constant zero length parameter; this could be due to transposed parameters memset(ir->ir_codes, sizeof(ir->ir_codes), 0); In actual practice the only caller I can find happens to already have cleared the buffer before calling ir_input_init. Signed-off-by: Alan Cox Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/ir-functions.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/common/ir-functions.c b/drivers/media/common/ir-functions.c index 655474b29e21..abd4791acb0e 100644 --- a/drivers/media/common/ir-functions.c +++ b/drivers/media/common/ir-functions.c @@ -64,7 +64,7 @@ void ir_input_init(struct input_dev *dev, struct ir_input_state *ir, ir->ir_type = ir_type; - memset(ir->ir_codes, sizeof(ir->ir_codes), 0); + memset(ir->ir_codes, 0, sizeof(ir->ir_codes)); /* * FIXME: This is a temporary workaround to use the new IR tables From 5fdd4baef6195a1f2960e901c8877e2105f832ca Mon Sep 17 00:00:00 2001 From: Andrei Pelinescu-Onciul Date: Sun, 29 Nov 2009 00:14:02 -0800 Subject: [PATCH 667/743] sctp: on T3_RTX retransmit all the in-flight chunks When retransmitting due to T3 timeout, retransmit all the in-flight chunks for the corresponding transport/path, including chunks sent less then 1 rto ago. This is the correct behaviour according to rfc4960 section 6.3.3 E3 and "Note: Any DATA chunks that were sent to the address for which the T3-rtx timer expired but did not fit in one MTU (rule E3 above) should be marked for retransmission and sent as soon as cwnd allows (normally, when a SACK arrives). ". This fixes problems when more then one path is present and the T3 retransmission of the first chunk that timeouts stops the T3 timer for the initial active path, leaving all the other in-flight chunks waiting forever or until a new chunk is transmitted on the same path and timeouts (and this will happen only if the cwnd allows sending new chunks, but since cwnd was dropped to MTU by the timeout => it will wait until the first heartbeat). Example: 10 packets in flight, sent at 0.1 s intervals on the primary path. The primary path is down and the first packet timeouts. The first packet is retransmitted on another path, the T3 timer for the primary path is stopped and cwnd is set to MTU. All the other 9 in-flight packets will not be retransmitted (unless more new packets are sent on the primary path which depend on cwnd allowing it, and even in this case the 9 packets will be retransmitted only after a new packet timeouts which even in the best case would be more then RTO). This commit reverts d0ce92910bc04e107b2f3f2048f07e94f570035d and also removes the now unused transport->last_rto, introduced in b6157d8e03e1e780660a328f7183bcbfa4a93a19. p.s The problem is not only when multiple paths are there. It can happen in a single homed environment. If the application stops sending data, it possible to have a hung association. Signed-off-by: Andrei Pelinescu-Onciul Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- include/net/sctp/structs.h | 1 - net/sctp/outqueue.c | 10 ---------- net/sctp/sm_sideeffect.c | 1 - net/sctp/transport.c | 5 ++--- 4 files changed, 2 insertions(+), 15 deletions(-) diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index cd2e18778f81..0a474568b003 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -893,7 +893,6 @@ struct sctp_transport { */ /* RTO : The current retransmission timeout value. */ unsigned long rto; - unsigned long last_rto; __u32 rtt; /* This is the most recent RTT. */ diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index c9f20e28521b..23e5e97aa617 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -423,16 +423,6 @@ void sctp_retransmit_mark(struct sctp_outq *q, if ((reason == SCTP_RTXR_FAST_RTX && (chunk->fast_retransmit == SCTP_NEED_FRTX)) || (reason != SCTP_RTXR_FAST_RTX && !chunk->tsn_gap_acked)) { - /* If this chunk was sent less then 1 rto ago, do not - * retransmit this chunk, but give the peer time - * to acknowlege it. Do this only when - * retransmitting due to T3 timeout. - */ - if (reason == SCTP_RTXR_T3_RTX && - time_before(jiffies, chunk->sent_at + - transport->last_rto)) - continue; - /* RFC 2960 6.2.1 Processing a Received SACK * * C) Any time a DATA chunk is marked for diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index 8674d4919556..efa516b47e81 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -480,7 +480,6 @@ static void sctp_do_8_2_transport_strike(struct sctp_association *asoc, * that indicates that we have an outstanding HB. */ if (!is_hb || transport->hb_sent) { - transport->last_rto = transport->rto; transport->rto = min((transport->rto * 2), transport->asoc->rto_max); } } diff --git a/net/sctp/transport.c b/net/sctp/transport.c index 3b141bb32faf..37a1184d789f 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -74,7 +74,7 @@ static struct sctp_transport *sctp_transport_init(struct sctp_transport *peer, * given destination transport address, set RTO to the protocol * parameter 'RTO.Initial'. */ - peer->last_rto = peer->rto = msecs_to_jiffies(sctp_rto_initial); + peer->rto = msecs_to_jiffies(sctp_rto_initial); peer->rtt = 0; peer->rttvar = 0; peer->srtt = 0; @@ -386,7 +386,6 @@ void sctp_transport_update_rto(struct sctp_transport *tp, __u32 rtt) tp->rto = tp->asoc->rto_max; tp->rtt = rtt; - tp->last_rto = tp->rto; /* Reset rto_pending so that a new RTT measurement is started when a * new data chunk is sent. @@ -602,7 +601,7 @@ void sctp_transport_reset(struct sctp_transport *t) */ t->cwnd = min(4*asoc->pathmtu, max_t(__u32, 2*asoc->pathmtu, 4380)); t->ssthresh = asoc->peer.i.a_rwnd; - t->last_rto = t->rto = asoc->rto_initial; + t->rto = asoc->rto_initial; t->rtt = 0; t->srtt = 0; t->rttvar = 0; From 862f89b3d4c6bf3caab7fc69661fc6e725edd00a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 25 Nov 2009 01:06:37 +0100 Subject: [PATCH 668/743] PM: fix irq enable/disable in runtime PM code This patch (as1305) fixes a bug in the irq-enable settings and removes some related overhead in the runtime PM code. In __pm_runtime_resume(), within the scope of the original spin_lock_irq(), we know that irqs are disabled. There's no reason to go through a pair of enable/disable cycles when acquiring and releasing the parent's lock. In __pm_runtime_set_status(), irqs are already disabled when the parent's lock is acquired, and they must remain disabled when it is released. Signed-off-by: Alan Stern Signed-off-by: Rafael J. Wysocki --- drivers/base/power/runtime.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index a770498a74ec..846d89e3d122 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -328,11 +328,11 @@ int __pm_runtime_resume(struct device *dev, bool from_wq) * necessary. */ parent = dev->parent; - spin_unlock_irq(&dev->power.lock); + spin_unlock(&dev->power.lock); pm_runtime_get_noresume(parent); - spin_lock_irq(&parent->power.lock); + spin_lock(&parent->power.lock); /* * We can resume if the parent's run-time PM is disabled or it * is set to ignore children. @@ -343,9 +343,9 @@ int __pm_runtime_resume(struct device *dev, bool from_wq) if (parent->power.runtime_status != RPM_ACTIVE) retval = -EBUSY; } - spin_unlock_irq(&parent->power.lock); + spin_unlock(&parent->power.lock); - spin_lock_irq(&dev->power.lock); + spin_lock(&dev->power.lock); if (retval) goto out; goto repeat; @@ -777,7 +777,7 @@ int __pm_runtime_set_status(struct device *dev, unsigned int status) } if (parent) { - spin_lock_irq(&parent->power.lock); + spin_lock(&parent->power.lock); /* * It is invalid to put an active child under a parent that is @@ -793,7 +793,7 @@ int __pm_runtime_set_status(struct device *dev, unsigned int status) atomic_inc(&parent->power.child_count); } - spin_unlock_irq(&parent->power.lock); + spin_unlock(&parent->power.lock); if (error) goto out; From 98468efddb101f8a29af974101c17ba513b07be1 Mon Sep 17 00:00:00 2001 From: Roger Oksanen Date: Sun, 29 Nov 2009 17:17:29 -0800 Subject: [PATCH 669/743] e100: Use pci pool to work around GFP_ATOMIC order 5 memory allocation failure pci_alloc_consistent uses GFP_ATOMIC allocation that may fail on some systems with limited memory (Bug #14265). pci_pool_alloc allows waiting with GFP_KERNEL. Tested-by: Karol Lewandowski Signed-off-by: Roger Oksanen Signed-off-by: David S. Miller --- drivers/net/e100.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 3c29a20b751e..d269a68ce354 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -157,6 +157,7 @@ #include #include #include +#include #include #include #include @@ -602,6 +603,7 @@ struct nic { struct mem *mem; dma_addr_t dma_addr; + struct pci_pool *cbs_pool; dma_addr_t cbs_dma_addr; u8 adaptive_ifs; u8 tx_threshold; @@ -1793,9 +1795,7 @@ static void e100_clean_cbs(struct nic *nic) nic->cb_to_clean = nic->cb_to_clean->next; nic->cbs_avail++; } - pci_free_consistent(nic->pdev, - sizeof(struct cb) * nic->params.cbs.count, - nic->cbs, nic->cbs_dma_addr); + pci_pool_free(nic->cbs_pool, nic->cbs, nic->cbs_dma_addr); nic->cbs = NULL; nic->cbs_avail = 0; } @@ -1813,8 +1813,8 @@ static int e100_alloc_cbs(struct nic *nic) nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = NULL; nic->cbs_avail = 0; - nic->cbs = pci_alloc_consistent(nic->pdev, - sizeof(struct cb) * count, &nic->cbs_dma_addr); + nic->cbs = pci_pool_alloc(nic->cbs_pool, GFP_KERNEL, + &nic->cbs_dma_addr); if (!nic->cbs) return -ENOMEM; @@ -2841,7 +2841,11 @@ static int __devinit e100_probe(struct pci_dev *pdev, DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n"); goto err_out_free; } - + nic->cbs_pool = pci_pool_create(netdev->name, + nic->pdev, + nic->params.cbs.count * sizeof(struct cb), + sizeof(u32), + 0); DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, MAC addr %pM\n", (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0), pdev->irq, netdev->dev_addr); @@ -2871,6 +2875,7 @@ static void __devexit e100_remove(struct pci_dev *pdev) unregister_netdev(netdev); e100_free(nic); pci_iounmap(pdev, nic->csr); + pci_pool_destroy(nic->cbs_pool); free_netdev(netdev); pci_release_regions(pdev); pci_disable_device(pdev); From bbf31bf18d34caa87dd01f08bf713635593697f2 Mon Sep 17 00:00:00 2001 From: David Ford Date: Sun, 29 Nov 2009 23:02:22 -0800 Subject: [PATCH 670/743] ipv4: additional update of dev_net(dev) to struct *net in ip_fragment.c, NULL ptr OOPS ipv4 ip_frag_reasm(), fully replace 'dev_net(dev)' with 'net', defined previously patched into 2.6.29. Between 2.6.28.10 and 2.6.29, net/ipv4/ip_fragment.c was patched, changing from dev_net(dev) to container_of(...). Unfortunately the goto section (out_fail) on oversized packets inside ip_frag_reasm() didn't get touched up as well. Oversized IP packets cause a NULL pointer dereference and immediate hang. I discovered this running openvasd and my previous email on this is titled: NULL pointer dereference at 2.6.32-rc8:net/ipv4/ip_fragment.c:566 Signed-off-by: David Ford Signed-off-by: David S. Miller --- net/ipv4/ip_fragment.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c index 575f9bd51ccd..d3fe10be7219 100644 --- a/net/ipv4/ip_fragment.c +++ b/net/ipv4/ip_fragment.c @@ -563,7 +563,7 @@ out_oversize: printk(KERN_INFO "Oversized IP packet from %pI4.\n", &qp->saddr); out_fail: - IP_INC_STATS_BH(dev_net(dev), IPSTATS_MIB_REASMFAILS); + IP_INC_STATS_BH(net, IPSTATS_MIB_REASMFAILS); return err; } From cc098dc705895f6b0109b7e8e026ac2b8ae1c0a1 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Sun, 29 Nov 2009 23:12:52 -0800 Subject: [PATCH 671/743] r8169: restore mac addr in rtl8169_remove_one and rtl_shutdown The newer chipsets (all PCI-E) are known that they need full power cycle (AC or battery removal) to reset MAC address to a hardwired one. Previous patch to address this problem loads the original MAC address from EEPROM. But it brought other problem for which it is necessary to introduce a new module parameter. However, it might suffice to restore the initial MAC address before shutdown/reboot/kexec and when removing the module. Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/r8169.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index b9221bdc7184..0fe2fc90f207 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3235,6 +3235,10 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev) flush_scheduled_work(); unregister_netdev(dev); + + /* restore original MAC address */ + rtl_rar_set(tp, dev->perm_addr); + rtl_disable_msi(pdev, tp); rtl8169_release_board(pdev, dev, tp->mmio_addr); pci_set_drvdata(pdev, NULL); @@ -4881,6 +4885,9 @@ static void rtl_shutdown(struct pci_dev *pdev) rtl8169_net_suspend(dev); + /* restore original MAC address */ + rtl_rar_set(tp, dev->perm_addr); + spin_lock_irq(&tp->lock); rtl8169_asic_down(ioaddr); From 6c53b1b15e222244358d3cbbefd2a13920faa352 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Sun, 29 Nov 2009 23:14:45 -0800 Subject: [PATCH 672/743] smsc9420: prevent BUG() if ethtool is called with interface down This patch fixes a null pointer dereference BUG() if ethtool is used on an smsc9420 interface while it is down, because the phy_dev is only allocated while the interface is up. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/smsc9420.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index b4909a2dec66..0f7909276237 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -252,6 +252,9 @@ static int smsc9420_ethtool_get_settings(struct net_device *dev, { struct smsc9420_pdata *pd = netdev_priv(dev); + if (!pd->phy_dev) + return -ENODEV; + cmd->maxtxpkt = 1; cmd->maxrxpkt = 1; return phy_ethtool_gset(pd->phy_dev, cmd); @@ -262,6 +265,9 @@ static int smsc9420_ethtool_set_settings(struct net_device *dev, { struct smsc9420_pdata *pd = netdev_priv(dev); + if (!pd->phy_dev) + return -ENODEV; + return phy_ethtool_sset(pd->phy_dev, cmd); } @@ -290,6 +296,10 @@ static void smsc9420_ethtool_set_msglevel(struct net_device *netdev, u32 data) static int smsc9420_ethtool_nway_reset(struct net_device *netdev) { struct smsc9420_pdata *pd = netdev_priv(netdev); + + if (!pd->phy_dev) + return -ENODEV; + return phy_start_aneg(pd->phy_dev); } @@ -312,6 +322,10 @@ smsc9420_ethtool_getregs(struct net_device *dev, struct ethtool_regs *regs, for (i = 0; i < 0x100; i += (sizeof(u32))) data[j++] = smsc9420_reg_read(pd, i); + // cannot read phy registers if the net device is down + if (!phy_dev) + return; + for (i = 0; i <= 31; i++) data[j++] = smsc9420_mii_read(phy_dev->bus, phy_dev->addr, i); } From d5ccd67bb77ced5249067d05171992a7d5020393 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Sat, 28 Nov 2009 00:13:23 +0000 Subject: [PATCH 673/743] NET: smc91x: Fix irq flags smc91x.h defines SMC_IRQ_FLAGS to be -1 when it wants the interrupt flags to be taken from the resource structure. However, d280ead changed this to checking for non-zero resource flags. Unfortunately, this means that on some platforms, we end up passing '-1' to request_irq rather than the desired result. Combine the two conditions into one so that the IRQ flags are taken from the resource if either SMC_IRQ_FLAGS is -1 or the resource flags specify an interrupt trigger. This restores network on at least the Versatile platform. Signed-off-by: Russell King Acked-by: Eric Miao Signed-off-by: David S. Miller --- drivers/net/smc91x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 05c91ee6921e..f12206bdbb75 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -2283,7 +2283,7 @@ static int __devinit smc_drv_probe(struct platform_device *pdev) ndev->irq = ires->start; - if (ires->flags & IRQF_TRIGGER_MASK) + if (irq_flags == -1 || ires->flags & IRQF_TRIGGER_MASK) irq_flags = ires->flags & IRQF_TRIGGER_MASK; ret = smc_request_attrib(pdev, ndev); From 3c91c7ae84966f992429e1e128c4936f22b89064 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 28 Nov 2009 13:57:00 +0000 Subject: [PATCH 674/743] ep93xx-eth: check for zero MAC address on probe, not on device open If we happen to have registered the driver without passing a MAC address, we will print a zero MAC address and register the interface with this invalid address, this is confusin. This patch moves the checking of a valid ethernet address and the generation of a random one down from the open function to the probe function. Signed-off-by: Florian Fainelli Acked-by: Lennert Buytenhek Signed-off-by: David S. Miller --- drivers/net/arm/ep93xx_eth.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c index 2be49c817995..b25467ac895c 100644 --- a/drivers/net/arm/ep93xx_eth.c +++ b/drivers/net/arm/ep93xx_eth.c @@ -628,15 +628,6 @@ static int ep93xx_open(struct net_device *dev) if (ep93xx_alloc_buffers(ep)) return -ENOMEM; - if (is_zero_ether_addr(dev->dev_addr)) { - random_ether_addr(dev->dev_addr); - printk(KERN_INFO "%s: generated random MAC address " - "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x.\n", dev->name, - dev->dev_addr[0], dev->dev_addr[1], - dev->dev_addr[2], dev->dev_addr[3], - dev->dev_addr[4], dev->dev_addr[5]); - } - napi_enable(&ep->napi); if (ep93xx_start_hw(dev)) { @@ -877,6 +868,9 @@ static int ep93xx_eth_probe(struct platform_device *pdev) ep->mii.mdio_write = ep93xx_mdio_write; ep->mdc_divisor = 40; /* Max HCLK 100 MHz, min MDIO clk 2.5 MHz. */ + if (is_zero_ether_addr(dev->dev_addr)) + random_ether_addr(dev->dev_addr); + err = register_netdev(dev); if (err) { dev_err(&pdev->dev, "Failed to register netdev\n"); From 40be261dfd8bfba4baeff40168d44a6a4450ace1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 29 Nov 2009 06:02:55 +0000 Subject: [PATCH 675/743] wan: cosa: drop chan->wsem on error path The other paths all drop chan->wsem. This was found by a static checker (smatch). Signed-off-by: Dan Carpenter Acked-by: Jan "Yenya" Kasprzak Signed-off-by: David S. Miller --- drivers/net/wan/cosa.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index e2c33c06190b..8e25ca7080c7 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -907,6 +907,7 @@ static ssize_t cosa_write(struct file *file, current->state = TASK_RUNNING; chan->tx_status = 1; spin_unlock_irqrestore(&cosa->lock, flags); + up(&chan->wsem); return -ERESTARTSYS; } } From 0cae200eec6330cd2c20b24279597be1da50dc93 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 30 Nov 2009 00:13:28 -0800 Subject: [PATCH 676/743] b44: Fix wedge when using netconsole. Fixes kernel bugzilla #14691 Due to the way netpoll works, it is perfectly legal to see NAPI already scheduled when new device events are pending in b44_interrupt(). So logging a message about it is wrong and in fact harmful. Based upon a patch by Andreas Mohr. Signed-off-by: David S. Miller --- drivers/net/b44.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/b44.c b/drivers/net/b44.c index e046943ef29d..2a9132343b66 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -912,9 +912,6 @@ static irqreturn_t b44_interrupt(int irq, void *dev_id) bp->istat = istat; __b44_disable_ints(bp); __napi_schedule(&bp->napi); - } else { - printk(KERN_ERR PFX "%s: Error, poll already scheduled\n", - dev->name); } irq_ack: From 4acd57c3de62374fe5bb52e5cd24538190f4eab2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 29 Nov 2009 16:39:52 +0000 Subject: [PATCH 677/743] ALSA: AACI: fix AC97 multiple-open bug Signed-off-by: Russell King Cc: Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index 1f0f8213e2d5..1cb7c282a1fb 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -504,6 +504,10 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, int err; aaci_pcm_hw_free(substream); + if (aacirun->pcm_open) { + snd_ac97_pcm_close(aacirun->pcm); + aacirun->pcm_open = 0; + } err = devdma_hw_alloc(NULL, substream, params_buffer_bytes(params)); From 8ee763b9c82c6ca0a59a7271ce4fa29d7baf5c09 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 29 Nov 2009 16:39:59 +0000 Subject: [PATCH 678/743] ALSA: AACI: fix recording bug pcm->r[1].slots is the double rate slot information, not the capture information. For capture, 'pcm' will already be the capture ac97 pcm structure. Signed-off-by: Russell King Cc: Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index 1cb7c282a1fb..6c160a038b23 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -521,7 +521,7 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, else err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params), params_channels(params), - aacirun->pcm->r[1].slots); + aacirun->pcm->r[0].slots); if (err) goto out; From 33a932d14323b957a4e17a6c8428d3f048a30822 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 28 Nov 2009 20:33:11 +0000 Subject: [PATCH 679/743] parisc: fix unwind with recent gcc versions kernel unwinding is broken with gcc >= 4.x. Part of the problem is that binutils seems very sensitive to where the unwind information is stored. Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin Signed-off-by: Linus Torvalds --- arch/parisc/kernel/unwind.c | 2 +- arch/parisc/kernel/vmlinux.lds.S | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c index 69dad5a850a8..a36799e85693 100644 --- a/arch/parisc/kernel/unwind.c +++ b/arch/parisc/kernel/unwind.c @@ -28,7 +28,7 @@ #define dbg(x...) #endif -#define KERNEL_START (KERNEL_BINARY_TEXT_START - 0x1000) +#define KERNEL_START (KERNEL_BINARY_TEXT_START) extern struct unwind_table_entry __start___unwind[]; extern struct unwind_table_entry __stop___unwind[]; diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index fda4baa059b5..9dab4a4e09f7 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -78,9 +78,6 @@ SECTIONS */ . = ALIGN(PAGE_SIZE); data_start = .; - EXCEPTION_TABLE(16) - - NOTES /* unwind info */ .PARISC.unwind : { @@ -89,6 +86,9 @@ SECTIONS __stop___unwind = .; } + EXCEPTION_TABLE(16) + NOTES + /* Data */ RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) From e3a41d7b99e7f97d9a50bec2a8f4eb237ce1d504 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Tue, 24 Nov 2009 06:34:03 +0100 Subject: [PATCH 680/743] .gitignore: Add bzip2 compressed files We can have bzip2 compressed images nowadays. Signed-off-by: Gertjan van Wingerde Signed-off-by: Linus Torvalds --- .gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/.gitignore b/.gitignore index b93fb7eff942..946c7ec5c922 100644 --- a/.gitignore +++ b/.gitignore @@ -25,6 +25,7 @@ *.elf *.bin *.gz +*.bz2 *.lzma *.patch *.gcno From 4253119acf412fd686ef4bd8749b5a4d70ea3a51 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 20 Nov 2009 09:15:51 +0100 Subject: [PATCH 681/743] mac80211: fix two remote exploits Lennert Buytenhek noticed a remotely triggerable problem in mac80211, which is due to some code shuffling I did that ended up changing the order in which things were done -- this was in commit d75636ef9c1af224f1097941879d5a8db7cd04e5 Author: Johannes Berg Date: Tue Feb 10 21:25:53 2009 +0100 mac80211: RX aggregation: clean up stop session The problem is that the BUG_ON moved before the various checks, and as such can be triggered. As the comment indicates, the BUG_ON can be removed since the ampdu_action callback must already exist when the state is OPERATIONAL. A similar code path leads to a WARN_ON in ieee80211_stop_tx_ba_session, which can also be removed. Cc: stable@kernel.org [2.6.29+] Cc: Lennert Buytenhek Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/agg-rx.c | 4 ---- net/mac80211/agg-tx.c | 2 +- 2 files changed, 1 insertion(+), 5 deletions(-) diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c index bc064d7933ff..ce8e0e772bab 100644 --- a/net/mac80211/agg-rx.c +++ b/net/mac80211/agg-rx.c @@ -85,10 +85,6 @@ void ieee80211_sta_stop_rx_ba_session(struct ieee80211_sub_if_data *sdata, u8 *r struct ieee80211_local *local = sdata->local; struct sta_info *sta; - /* stop HW Rx aggregation. ampdu_action existence - * already verified in session init so we add the BUG_ON */ - BUG_ON(!local->ops->ampdu_action); - rcu_read_lock(); sta = sta_info_get(local, ra); diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 206fd82f0c76..63224d1ee8dd 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -545,7 +545,7 @@ int ieee80211_stop_tx_ba_session(struct ieee80211_hw *hw, struct sta_info *sta; int ret = 0; - if (WARN_ON(!local->ops->ampdu_action)) + if (!local->ops->ampdu_action) return -EINVAL; if (tid >= STA_TID_NUM) From 827d42c9ac91ddd728e4f4a31fefb906ef2ceff7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 22 Nov 2009 12:28:41 +0100 Subject: [PATCH 682/743] mac80211: fix spurious delBA handling Lennert Buytenhek noticed that delBA handling in mac80211 was broken and has remotely triggerable problems, some of which are due to some code shuffling I did that ended up changing the order in which things were done -- this was commit d75636ef9c1af224f1097941879d5a8db7cd04e5 Author: Johannes Berg Date: Tue Feb 10 21:25:53 2009 +0100 mac80211: RX aggregation: clean up stop session and other parts were already present in the original commit d92684e66091c0f0101819619b315b4bb8b5bcc5 Author: Ron Rindjunsky Date: Mon Jan 28 14:07:22 2008 +0200 mac80211: A-MPDU Tx add delBA from recipient support The first problem is that I moved a BUG_ON before various checks -- thereby making it possible to hit. As the comment indicates, the BUG_ON can be removed since the ampdu_action callback must already exist when the state is != IDLE. The second problem isn't easily exploitable but there's a race condition due to unconditionally setting the state to OPERATIONAL when a delBA frame is received, even when no aggregation session was ever initiated. All the drivers accept stopping the session even then, but that opens a race window where crashes could happen before the driver accepts it. Right now, a WARN_ON may happen with non-HT drivers, while the race opens only for HT drivers. For this case, there are two things necessary to fix it: 1) don't process spurious delBA frames, and be more careful about the session state; don't drop the lock 2) HT drivers need to be prepared to handle a session stop even before the session was really started -- this is true for all drivers (that support aggregation) but iwlwifi which can be fixed easily. The other HT drivers (ath9k and ar9170) are behaving properly already. Reported-by: Lennert Buytenhek Cc: stable@kernel.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-tx.c | 10 +++++++++- include/net/mac80211.h | 6 ++++++ net/mac80211/agg-tx.c | 15 +++++++-------- net/mac80211/ht.c | 8 +++----- net/mac80211/ieee80211_i.h | 2 ++ 5 files changed, 27 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index fb9bcfa6d947..b7e196e3c8d3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -1277,8 +1277,16 @@ int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid) return -ENXIO; } + if (priv->stations[sta_id].tid[tid].agg.state == + IWL_EMPTYING_HW_QUEUE_ADDBA) { + IWL_DEBUG_HT(priv, "AGG stop before setup done\n"); + ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, ra, tid); + priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF; + return 0; + } + if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_ON) - IWL_WARN(priv, "Stopping AGG while state not IWL_AGG_ON\n"); + IWL_WARN(priv, "Stopping AGG while state not ON or starting\n"); tid_data = &priv->stations[sta_id].tid[tid]; ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index c75b960c8ac8..998c30fc8981 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1283,6 +1283,12 @@ enum ieee80211_filter_flags { * * These flags are used with the ampdu_action() callback in * &struct ieee80211_ops to indicate which action is needed. + * + * Note that drivers MUST be able to deal with a TX aggregation + * session being stopped even before they OK'ed starting it by + * calling ieee80211_start_tx_ba_cb(_irqsafe), because the peer + * might receive the addBA frame and send a delBA right away! + * * @IEEE80211_AMPDU_RX_START: start Rx aggregation * @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation * @IEEE80211_AMPDU_TX_START: start Tx aggregation diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 63224d1ee8dd..89e238b001de 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -123,13 +123,18 @@ void ieee80211_send_bar(struct ieee80211_sub_if_data *sdata, u8 *ra, u16 tid, u1 ieee80211_tx_skb(sdata, skb, 0); } -static int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, - enum ieee80211_back_parties initiator) +int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, + enum ieee80211_back_parties initiator) { struct ieee80211_local *local = sta->local; int ret; u8 *state; +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG "Tx BA session stop requested for %pM tid %u\n", + sta->sta.addr, tid); +#endif /* CONFIG_MAC80211_HT_DEBUG */ + state = &sta->ampdu_mlme.tid_state_tx[tid]; if (*state == HT_AGG_STATE_OPERATIONAL) @@ -143,7 +148,6 @@ static int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, /* HW shall not deny going back to legacy */ if (WARN_ON(ret)) { - *state = HT_AGG_STATE_OPERATIONAL; /* * We may have pending packets get stuck in this case... * Not bothering with a workaround for now. @@ -525,11 +529,6 @@ int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, goto unlock; } -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "Tx BA session stop requested for %pM tid %u\n", - sta->sta.addr, tid); -#endif /* CONFIG_MAC80211_HT_DEBUG */ - ret = ___ieee80211_stop_tx_ba_session(sta, tid, initiator); unlock: diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 48ef1a282b91..cdc58e61d921 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -141,7 +141,6 @@ void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, struct ieee80211_mgmt *mgmt, size_t len) { - struct ieee80211_local *local = sdata->local; u16 tid, params; u16 initiator; @@ -161,10 +160,9 @@ void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata, WLAN_BACK_INITIATOR, 0); else { /* WLAN_BACK_RECIPIENT */ spin_lock_bh(&sta->lock); - sta->ampdu_mlme.tid_state_tx[tid] = - HT_AGG_STATE_OPERATIONAL; + if (sta->ampdu_mlme.tid_state_tx[tid] & HT_ADDBA_REQUESTED_MSK) + ___ieee80211_stop_tx_ba_session(sta, tid, + WLAN_BACK_RECIPIENT); spin_unlock_bh(&sta->lock); - ieee80211_stop_tx_ba_session(&local->hw, sta->sta.addr, tid, - WLAN_BACK_RECIPIENT); } } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index a910bf1f092f..10d316e455de 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1091,6 +1091,8 @@ void ieee80211_process_addba_request(struct ieee80211_local *local, int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, enum ieee80211_back_parties initiator); +int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, + enum ieee80211_back_parties initiator); /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, From 7924326fef03e9992c118a42aa148c4f824a4097 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 30 Nov 2009 17:37:20 -0200 Subject: [PATCH 683/743] staging/go7007: Fix compilation by re-adding the missing s2250-loader.h As pointed by Stefan Lippers-Hollmann , Commit: fd9a40da1db372833e1af6397d2f6c94ceff3dad broke s2250 compilation. This patch re-adds the missing s2250-loader.h Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/go7007/s2250-loader.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 drivers/staging/go7007/s2250-loader.h diff --git a/drivers/staging/go7007/s2250-loader.h b/drivers/staging/go7007/s2250-loader.h new file mode 100644 index 000000000000..b7c301af16cc --- /dev/null +++ b/drivers/staging/go7007/s2250-loader.h @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2005-2006 Micronas USA Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#ifndef _S2250_LOADER_H_ +#define _S2250_LOADER_H_ + +extern int s2250loader_init(void); +extern void s2250loader_cleanup(void); + +#endif From e49bd72f9cfba9f0d0204f961d036cd0c7e37f2e Mon Sep 17 00:00:00 2001 From: Pete Eberlein Date: Sun, 15 Nov 2009 08:14:14 -0300 Subject: [PATCH 684/743] V4L/DVB (13372): staging/go7007: fix mutex function usage for s2250 Fix mutex function usage, which was overlooked in a previous patch. Signed-off-by: Pete Eberlein Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/go7007/s2250-board.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/go7007/s2250-board.c b/drivers/staging/go7007/s2250-board.c index 8c85a9c3665a..f4a6541c3e60 100644 --- a/drivers/staging/go7007/s2250-board.c +++ b/drivers/staging/go7007/s2250-board.c @@ -261,7 +261,7 @@ static int read_reg_fp(struct i2c_client *client, u16 addr, u16 *val) memset(buf, 0xcd, 6); usb = go->hpi_context; - if (down_interruptible(&usb->i2c_lock) != 0) { + if (mutex_lock_interruptible(&usb->i2c_lock) != 0) { printk(KERN_INFO "i2c lock failed\n"); kfree(buf); return -EINTR; @@ -270,7 +270,7 @@ static int read_reg_fp(struct i2c_client *client, u16 addr, u16 *val) kfree(buf); return -EFAULT; } - up(&usb->i2c_lock); + mutex_unlock(&usb->i2c_lock); *val = (buf[0] << 8) | buf[1]; kfree(buf); From 04d8a9db89f00dee78d792d094dc573784ead643 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 30 Nov 2009 15:37:25 -0500 Subject: [PATCH 685/743] arch/alpha/kernel/sys_ruffian.c: Use DIV_ROUND_CLOSEST The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @haskernel@ @@ @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // Signed-off-by: Julia Lawall Cc: Ivan Kokshaysky Cc: Richard Henderson Signed-off-by: Matt Turner --- arch/alpha/kernel/sys_ruffian.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/alpha/kernel/sys_ruffian.c b/arch/alpha/kernel/sys_ruffian.c index d9f9cfeb9931..8de1046fe91e 100644 --- a/arch/alpha/kernel/sys_ruffian.c +++ b/arch/alpha/kernel/sys_ruffian.c @@ -66,7 +66,7 @@ ruffian_init_irq(void) common_init_isa_dma(); } -#define RUFFIAN_LATCH ((PIT_TICK_RATE + HZ / 2) / HZ) +#define RUFFIAN_LATCH DIV_ROUND_CLOSEST(PIT_TICK_RATE, HZ) static void __init ruffian_init_rtc(void) From cc9a2c8301683f73b7e0d1fc2cb5159110f3469f Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 30 Nov 2009 15:38:19 -0500 Subject: [PATCH 686/743] arch/alpha/kernel: Add kmalloc NULL tests Check that the result of kmalloc is not NULL before passing it to other functions. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // Signed-off-by: Julia Lawall Cc: Ivan Kokshaysky Cc: Richard Henderson Signed-off-by: Matt Turner --- arch/alpha/kernel/core_marvel.c | 2 ++ arch/alpha/kernel/core_titan.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c index 8e059e58b0ac..53dd2f1a53aa 100644 --- a/arch/alpha/kernel/core_marvel.c +++ b/arch/alpha/kernel/core_marvel.c @@ -1103,6 +1103,8 @@ marvel_agp_info(void) * Allocate the info structure. */ agp = kmalloc(sizeof(*agp), GFP_KERNEL); + if (!agp) + return NULL; /* * Fill it in. diff --git a/arch/alpha/kernel/core_titan.c b/arch/alpha/kernel/core_titan.c index 76686497b1e2..219bf271c0ba 100644 --- a/arch/alpha/kernel/core_titan.c +++ b/arch/alpha/kernel/core_titan.c @@ -757,6 +757,8 @@ titan_agp_info(void) * Allocate the info structure. */ agp = kmalloc(sizeof(*agp), GFP_KERNEL); + if (!agp) + return NULL; /* * Fill it in. From c69f677cc852f3f7b2342ab2f1598670a463d576 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 20 Nov 2009 20:48:31 +0100 Subject: [PATCH 687/743] fbdev: Migrate mailing lists to vger The fbdev mailing lists at SourceForge have been migrated to a single mailing list at kernel.org: linux-fbdev@vger.kernel.org. Signed-off-by: Geert Uytterhoeven Acked-by: Jean Delvare Signed-off-by: Linus Torvalds --- Documentation/fb/framebuffer.txt | 6 ++---- MAINTAINERS | 28 ++++++++++++++-------------- 2 files changed, 16 insertions(+), 18 deletions(-) diff --git a/Documentation/fb/framebuffer.txt b/Documentation/fb/framebuffer.txt index b3e3a0356839..fe79e3c8847d 100644 --- a/Documentation/fb/framebuffer.txt +++ b/Documentation/fb/framebuffer.txt @@ -312,10 +312,8 @@ and to the following documentation: 8. Mailing list --------------- -There are several frame buffer device related mailing lists at SourceForge: - - linux-fbdev-announce@lists.sourceforge.net, for announcements, - - linux-fbdev-user@lists.sourceforge.net, for generic user support, - - linux-fbdev-devel@lists.sourceforge.net, for project developers. +There is a frame buffer device related mailing list at kernel.org: +linux-fbdev@vger.kernel.org. Point your web browser to http://sourceforge.net/projects/linux-fbdev/ for subscription information and archive browsing. diff --git a/MAINTAINERS b/MAINTAINERS index c824b4d62754..5726ffc8c43d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1027,7 +1027,7 @@ F: drivers/serial/atmel_serial.c ATMEL LCDFB DRIVER M: Nicolas Ferre -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/atmel_lcdfb.c F: include/video/atmel_lcdc.h @@ -2113,7 +2113,7 @@ F: drivers/net/wan/dlci.c F: drivers/net/wan/sdla.c FRAMEBUFFER LAYER -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org W: http://linux-fbdev.sourceforge.net/ S: Orphan F: Documentation/fb/ @@ -2136,7 +2136,7 @@ F: drivers/i2c/busses/i2c-cpm.c FREESCALE IMX / MXC FRAMEBUFFER DRIVER M: Sascha Hauer -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/plat-mxc/include/mach/imxfb.h @@ -2635,7 +2635,7 @@ S: Supported F: security/integrity/ima/ IMS TWINTURBO FRAMEBUFFER DRIVER -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Orphan F: drivers/video/imsttfb.c @@ -2670,14 +2670,14 @@ F: drivers/input/ INTEL FRAMEBUFFER DRIVER (excluding 810 and 815) M: Sylvain Meyer -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: Documentation/fb/intelfb.txt F: drivers/video/intelfb/ INTEL 810/815 FRAMEBUFFER DRIVER M: Antonino Daplas -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/i810/ @@ -3391,7 +3391,7 @@ S: Supported MATROX FRAMEBUFFER DRIVER M: Petr Vandrovec -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/matrox/matroxfb_* F: include/linux/matroxfb.h @@ -3778,7 +3778,7 @@ F: fs/ntfs/ NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER M: Antonino Daplas -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/riva/ F: drivers/video/nvidia/ @@ -3813,7 +3813,7 @@ F: sound/soc/omap/ OMAP FRAMEBUFFER SUPPORT M: Imre Deak -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org L: linux-omap@vger.kernel.org S: Maintained F: drivers/video/omap/ @@ -4319,14 +4319,14 @@ F: include/linux/qnxtypes.h RADEON FRAMEBUFFER DISPLAY DRIVER M: Benjamin Herrenschmidt -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/aty/radeon* F: include/linux/radeonfb.h RAGE128 FRAMEBUFFER DISPLAY DRIVER M: Paul Mackerras -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/aty/aty128fb.c @@ -4465,7 +4465,7 @@ F: drivers/net/wireless/rtl818x/rtl8187* S3 SAVAGE FRAMEBUFFER DRIVER M: Antonino Daplas -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/savage/ @@ -5628,7 +5628,7 @@ S: Maintained UVESAFB DRIVER M: Michal Januszewski -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org W: http://dev.gentoo.org/~spock/projects/uvesafb/ S: Maintained F: Documentation/fb/uvesafb.txt @@ -5661,7 +5661,7 @@ F: drivers/mmc/host/via-sdmmc.c VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER M: Joseph Chan M: Scott Fang -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/via/ From 199bc9ff5ca5e4b3bcaff8927b2983c65f34c263 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 30 Nov 2009 09:06:40 +0000 Subject: [PATCH 688/743] jffs2: Fix memory corruption in jffs2_read_inode_range() In 2.6.23 kernel, commit a32ea1e1f925399e0d81ca3f7394a44a6dafa12c ("Fix read/truncate race") fixed a race in the generic code, and as a side effect, now do_generic_file_read() can ask us to readpage() past the i_size. This seems to be correctly handled by the block routines (e.g. block_read_full_page() fills the page with zeroes in case if somebody is trying to read past the last inode's block). JFFS2 doesn't handle this; it assumes that it won't be asked to read pages which don't exist -- and thus that there will be at least _one_ valid 'frag' on the page it's being asked to read. It will fill any holes with the following memset: memset(buf, 0, min(end, frag->ofs + frag->size) - offset); When the 'closest smaller match' returned by jffs2_lookup_node_frag() is actually on a previous page and ends before 'offset', that results in: memset(buf, 0, ); Hopefully, in most cases the corruption is fatal, and quickly causing random oopses, like this: root@10.0.0.4:~/ltp-fs-20090531# ./testcases/kernel/fs/ftest/ftest01 Unable to handle kernel paging request for data at address 0x00000008 Faulting instruction address: 0xc01cd980 Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01cd980] rb_insert_color+0x38/0x184 LR [c0043978] enqueue_hrtimer+0x88/0xc4 Call Trace: [c6c63b60] [c004f9a8] tick_sched_timer+0xa0/0xe4 (unreliable) [c6c63b80] [c0043978] enqueue_hrtimer+0x88/0xc4 [c6c63b90] [c0043a48] __run_hrtimer+0x94/0xbc [c6c63bb0] [c0044628] hrtimer_interrupt+0x140/0x2b8 [c6c63c10] [c000f8e8] timer_interrupt+0x13c/0x254 [c6c63c30] [c001352c] ret_from_except+0x0/0x14 --- Exception: 901 at memset+0x38/0x5c LR = jffs2_read_inode_range+0x144/0x17c [c6c63cf0] [00000000] (null) (unreliable) This patch fixes the issue, plus fixes all LTP tests on NAND/UBI with JFFS2 filesystem that were failing since 2.6.23 (seems like the bug above also broke the truncation). Reported-By: Anton Vorontsov Tested-By: Anton Vorontsov Signed-off-by: David Woodhouse Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- fs/jffs2/read.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/fs/jffs2/read.c b/fs/jffs2/read.c index cfe05c1966a5..3f39be1b0455 100644 --- a/fs/jffs2/read.c +++ b/fs/jffs2/read.c @@ -164,12 +164,15 @@ int jffs2_read_inode_range(struct jffs2_sb_info *c, struct jffs2_inode_info *f, /* XXX FIXME: Where a single physical node actually shows up in two frags, we read it twice. Don't do that. */ - /* Now we're pointing at the first frag which overlaps our page */ + /* Now we're pointing at the first frag which overlaps our page + * (or perhaps is before it, if we've been asked to read off the + * end of the file). */ while(offset < end) { D2(printk(KERN_DEBUG "jffs2_read_inode_range: offset %d, end %d\n", offset, end)); - if (unlikely(!frag || frag->ofs > offset)) { + if (unlikely(!frag || frag->ofs > offset || + frag->ofs + frag->size <= offset)) { uint32_t holesize = end - offset; - if (frag) { + if (frag && frag->ofs > offset) { D1(printk(KERN_NOTICE "Eep. Hole in ino #%u fraglist. frag->ofs = 0x%08x, offset = 0x%08x\n", f->inocache->ino, frag->ofs, offset)); holesize = min(holesize, frag->ofs - offset); } From e8105903d78c81119754a42926951d9d17e191ba Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Mon, 23 Nov 2009 12:28:53 +0000 Subject: [PATCH 689/743] powerpc: Fix DEBUG_HIGHMEM build break from d4515646699 Code was added to mm/higmem.c that depends on several kmap types that powerpc does not support. We add dummy invalid definitions for KM_NMI, KM_NM_PTE, and KM_IRQ_PTE. According to list discussion, this fix should not be needed anymore starting with 2.6.33. The code is commented to this effect so hopefully we will remember to remove this. Signed-off-by: Becky Bruce Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/kmap_types.h | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/powerpc/include/asm/kmap_types.h b/arch/powerpc/include/asm/kmap_types.h index b6bac6f61c16..916369575c97 100644 --- a/arch/powerpc/include/asm/kmap_types.h +++ b/arch/powerpc/include/asm/kmap_types.h @@ -29,5 +29,16 @@ enum km_type { KM_TYPE_NR }; +/* + * This is a temporary build fix that (so they say on lkml....) should no longer + * be required after 2.6.33, because of changes planned to the kmap code. + * Let's try to remove this cruft then. + */ +#ifdef CONFIG_DEBUG_HIGHMEM +#define KM_NMI (-1) +#define KM_NMI_PTE (-1) +#define KM_IRQ_PTE (-1) +#endif + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_KMAP_TYPES_H */ From 8627b96dd80dca440d91fbb1ec733be25912d0dd Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 18 Nov 2009 14:12:58 +0000 Subject: [PATCH 690/743] tty_port: handle the nonblocking open of a dead port corner case Some drivers allow O_NDELAY of a dead port (eg for setserial to work). In that situation we must not try to raise the carrier. Signed-off-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/char/tty_port.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 2e8552dc5eda..c63f3d33914a 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -219,8 +219,11 @@ int tty_port_block_til_ready(struct tty_port *port, /* if non-blocking mode is set we can pass directly to open unless the port has just hung up or is in another error state */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { + if (tty->flags & (1 << TTY_IO_ERROR)) { + port->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + if (filp->f_flags & O_NONBLOCK) { /* Indicate we are open */ if (tty->termios->c_cflag & CBAUD) tty_port_raise_dtr_rts(port); From b037179f7a4fff7bd8279b0568a7dc663ebc9d15 Mon Sep 17 00:00:00 2001 From: Maxime Bizon Date: Sun, 15 Nov 2009 05:42:18 +0100 Subject: [PATCH 691/743] bcm63xx_uart: Fix serial driver compile breakage. The driver missed a small API change while sitting in Ralf's tree, this patch makes it compile again. Signed-off-by: Maxime Bizon Signed-off-by: Greg Kroah-Hartman --- drivers/serial/bcm63xx_uart.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c index beddaa6e9069..37ad0c449937 100644 --- a/drivers/serial/bcm63xx_uart.c +++ b/drivers/serial/bcm63xx_uart.c @@ -242,7 +242,7 @@ static void bcm_uart_do_rx(struct uart_port *port) * higher than fifo size anyway since we're much faster than * serial port */ max_count = 32; - tty = port->info->port.tty; + tty = port->state->port.tty; do { unsigned int iestat, c, cstat; char flag; @@ -318,7 +318,7 @@ static void bcm_uart_do_tx(struct uart_port *port) return; } - xmit = &port->info->xmit; + xmit = &port->state->xmit; if (uart_circ_empty(xmit)) goto txq_empty; From 16173c7c2d79da7eb89b41acfdebd74b130f4339 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 24 Nov 2009 10:22:41 +0000 Subject: [PATCH 692/743] tty/of_serial: add missing ns16550a id Many boards have a bug-free ns16550 compatible serial port, which we should register as PORT_16550A. This introduces a new value "ns16550a" for the compatible property of of_serial to let a firmware choose that model instead of using the crippled PORT_16550 mode. Reported-by: Alon Ziv Signed-off-by: Michal Simek Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/serial/of_serial.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c index 02406ba6da1c..cdf172eda2e3 100644 --- a/drivers/serial/of_serial.c +++ b/drivers/serial/of_serial.c @@ -161,6 +161,7 @@ static int of_platform_serial_remove(struct of_device *ofdev) static struct of_device_id __devinitdata of_platform_serial_table[] = { { .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, }, { .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, }, + { .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, }, { .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, }, { .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, }, { .type = "serial", .compatible = "ns16850", .data = (void *)PORT_16850, }, From 8c960e49d8beaca7c5b3967cede225bbba36bf43 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Wed, 11 Nov 2009 16:57:03 -0500 Subject: [PATCH 693/743] Staging: hv: Fix argument order in incorrect memset invocations in hyperv driver. Nearly every invocation of memset in drivers/staging/hv/StorVsc.c has its arguments the wrong way around. Signed-off-by: Dave Jones Cc: Hank Janssen Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/StorVsc.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/staging/hv/StorVsc.c b/drivers/staging/hv/StorVsc.c index 14015c927940..2f7c425896f7 100644 --- a/drivers/staging/hv/StorVsc.c +++ b/drivers/staging/hv/StorVsc.c @@ -196,7 +196,7 @@ static int StorVscChannelInit(struct hv_device *Device) * Now, initiate the vsc/vsp initialization protocol on the open * channel */ - memset(request, sizeof(struct storvsc_request_extension), 0); + memset(request, 0, sizeof(struct storvsc_request_extension)); request->WaitEvent = osd_WaitEventCreate(); vstorPacket->Operation = VStorOperationBeginInitialization; @@ -233,7 +233,7 @@ static int StorVscChannelInit(struct hv_device *Device) DPRINT_INFO(STORVSC, "QUERY_PROTOCOL_VERSION_OPERATION..."); /* reuse the packet for version range supported */ - memset(vstorPacket, sizeof(struct vstor_packet), 0); + memset(vstorPacket, 0, sizeof(struct vstor_packet)); vstorPacket->Operation = VStorOperationQueryProtocolVersion; vstorPacket->Flags = REQUEST_COMPLETION_FLAG; @@ -266,7 +266,7 @@ static int StorVscChannelInit(struct hv_device *Device) /* Query channel properties */ DPRINT_INFO(STORVSC, "QUERY_PROPERTIES_OPERATION..."); - memset(vstorPacket, sizeof(struct vstor_packet), 0); + memset(vstorPacket, 0, sizeof(struct vstor_packet)); vstorPacket->Operation = VStorOperationQueryProperties; vstorPacket->Flags = REQUEST_COMPLETION_FLAG; vstorPacket->StorageChannelProperties.PortNumber = @@ -305,7 +305,7 @@ static int StorVscChannelInit(struct hv_device *Device) DPRINT_INFO(STORVSC, "END_INITIALIZATION_OPERATION..."); - memset(vstorPacket, sizeof(struct vstor_packet), 0); + memset(vstorPacket, 0, sizeof(struct vstor_packet)); vstorPacket->Operation = VStorOperationEndInitialization; vstorPacket->Flags = REQUEST_COMPLETION_FLAG; @@ -508,7 +508,7 @@ static int StorVscConnectToVsp(struct hv_device *Device) int ret; storDriver = (struct storvsc_driver_object *)Device->Driver; - memset(&props, sizeof(struct vmstorage_channel_properties), 0); + memset(&props, 0, sizeof(struct vmstorage_channel_properties)); /* Open the channel */ ret = Device->Driver->VmbusChannelInterface.Open(Device, From 5996b3ddc422a16d53b8acf4980d0d6e8b2bf1ed Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Fri, 20 Nov 2009 16:29:17 +0000 Subject: [PATCH 694/743] Staging: hv: Fix vmbus event handler bug The flag ENABLE_POLLING is always enabled in original Makefile, but accidently removed during porting to mainline kernel. The patch fixes this bug which can cause stalled network communication. Credit needs to go to Eric Sesterhenn For pointing out a typo in the original code as well. Signed-off-by: Hank Janssen Signed-off-by: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/Channel.c | 16 ++++------------ drivers/staging/hv/ChannelMgmt.c | 2 +- 2 files changed, 5 insertions(+), 13 deletions(-) diff --git a/drivers/staging/hv/Channel.c b/drivers/staging/hv/Channel.c index d649ee169d95..746370e82115 100644 --- a/drivers/staging/hv/Channel.c +++ b/drivers/staging/hv/Channel.c @@ -611,7 +611,7 @@ void VmbusChannelClose(struct vmbus_channel *Channel) /* Stop callback and cancel the timer asap */ Channel->OnChannelCallback = NULL; - del_timer(&Channel->poll_timer); + del_timer_sync(&Channel->poll_timer); /* Send a closing message */ info = kmalloc(sizeof(*info) + @@ -978,14 +978,10 @@ void VmbusChannelOnChannelEvent(struct vmbus_channel *Channel) { DumpVmbusChannel(Channel); ASSERT(Channel->OnChannelCallback); -#ifdef ENABLE_POLLING - del_timer(&Channel->poll_timer); + Channel->OnChannelCallback(Channel->ChannelCallbackContext); - channel->poll_timer.expires(jiffies + usecs_to_jiffies(100); - add_timer(&channel->poll_timer); -#else - Channel->OnChannelCallback(Channel->ChannelCallbackContext); -#endif + + mod_timer(&Channel->poll_timer, jiffies + usecs_to_jiffies(100)); } /** @@ -997,10 +993,6 @@ void VmbusChannelOnTimer(unsigned long data) if (channel->OnChannelCallback) { channel->OnChannelCallback(channel->ChannelCallbackContext); -#ifdef ENABLE_POLLING - channel->poll_timer.expires(jiffies + usecs_to_jiffies(100); - add_timer(&channel->poll_timer); -#endif } } diff --git a/drivers/staging/hv/ChannelMgmt.c b/drivers/staging/hv/ChannelMgmt.c index 3db62caedcff..ef38467ed4e2 100644 --- a/drivers/staging/hv/ChannelMgmt.c +++ b/drivers/staging/hv/ChannelMgmt.c @@ -119,7 +119,7 @@ static inline void ReleaseVmbusChannel(void *context) */ void FreeVmbusChannel(struct vmbus_channel *Channel) { - del_timer(&Channel->poll_timer); + del_timer_sync(&Channel->poll_timer); /* * We have to release the channel's workqueue/thread in the vmbus's From d0e94d17ed8590d53252212414a627125825b379 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Mon, 23 Nov 2009 17:00:22 +0000 Subject: [PATCH 695/743] Staging: hv: Fix some missing author names Fix some missing author names. They were accidentally removed by someone within Microsoft before the files were sent for inclusion in the kernel. Signed-off-by: Hank Janssen Signed-off-by: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/BlkVsc.c | 1 + drivers/staging/hv/NetVsc.c | 1 + drivers/staging/hv/NetVsc.h | 1 + drivers/staging/hv/blkvsc_drv.c | 1 + drivers/staging/hv/netvsc_drv.c | 1 + 5 files changed, 5 insertions(+) diff --git a/drivers/staging/hv/BlkVsc.c b/drivers/staging/hv/BlkVsc.c index 51aa861292fc..a48ee3a12646 100644 --- a/drivers/staging/hv/BlkVsc.c +++ b/drivers/staging/hv/BlkVsc.c @@ -16,6 +16,7 @@ * Place - Suite 330, Boston, MA 02111-1307 USA. * * Authors: + * Haiyang Zhang * Hank Janssen * */ diff --git a/drivers/staging/hv/NetVsc.c b/drivers/staging/hv/NetVsc.c index d384c0ddf069..1c717f9a554e 100644 --- a/drivers/staging/hv/NetVsc.c +++ b/drivers/staging/hv/NetVsc.c @@ -15,6 +15,7 @@ * Place - Suite 330, Boston, MA 02111-1307 USA. * * Authors: + * Haiyang Zhang * Hank Janssen */ #include diff --git a/drivers/staging/hv/NetVsc.h b/drivers/staging/hv/NetVsc.h index 3e7112f7c755..6e0e03494126 100644 --- a/drivers/staging/hv/NetVsc.h +++ b/drivers/staging/hv/NetVsc.h @@ -16,6 +16,7 @@ * Place - Suite 330, Boston, MA 02111-1307 USA. * * Authors: + * Haiyang Zhang * Hank Janssen * */ diff --git a/drivers/staging/hv/blkvsc_drv.c b/drivers/staging/hv/blkvsc_drv.c index 99c49261a8b4..62b282844a53 100644 --- a/drivers/staging/hv/blkvsc_drv.c +++ b/drivers/staging/hv/blkvsc_drv.c @@ -15,6 +15,7 @@ * Place - Suite 330, Boston, MA 02111-1307 USA. * * Authors: + * Haiyang Zhang * Hank Janssen */ #include diff --git a/drivers/staging/hv/netvsc_drv.c b/drivers/staging/hv/netvsc_drv.c index 3192d50f7251..0d7459e2d036 100644 --- a/drivers/staging/hv/netvsc_drv.c +++ b/drivers/staging/hv/netvsc_drv.c @@ -15,6 +15,7 @@ * Place - Suite 330, Boston, MA 02111-1307 USA. * * Authors: + * Haiyang Zhang * Hank Janssen */ #include From fb08808ca252a76519d3b17fc3b6cfc6b2806e55 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 21 Oct 2009 14:42:11 +0200 Subject: [PATCH 696/743] Staging: update TODO files Remove my mail address. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8187se/TODO | 3 +-- drivers/staging/rtl8192su/TODO | 3 +-- drivers/staging/vt6655/TODO | 5 ++--- drivers/staging/vt6656/TODO | 5 ++--- 4 files changed, 6 insertions(+), 10 deletions(-) diff --git a/drivers/staging/rtl8187se/TODO b/drivers/staging/rtl8187se/TODO index c09a9160739d..a762e79873e9 100644 --- a/drivers/staging/rtl8187se/TODO +++ b/drivers/staging/rtl8187se/TODO @@ -11,5 +11,4 @@ TODO: - sparse fixes - integrate with drivers/net/wireless/rtl818x -Please send any patches to Greg Kroah-Hartman and -Bartlomiej Zolnierkiewicz . +Please send any patches to Greg Kroah-Hartman . diff --git a/drivers/staging/rtl8192su/TODO b/drivers/staging/rtl8192su/TODO index b13be9edb278..f11eec700030 100644 --- a/drivers/staging/rtl8192su/TODO +++ b/drivers/staging/rtl8192su/TODO @@ -14,5 +14,4 @@ TODO: - sparse fixes - integrate with drivers/net/wireless/rtl818x -Please send any patches to Greg Kroah-Hartman and -Bartlomiej Zolnierkiewicz . +Please send any patches to Greg Kroah-Hartman . diff --git a/drivers/staging/vt6655/TODO b/drivers/staging/vt6655/TODO index 8462cd17eb61..cb04aaafc46f 100644 --- a/drivers/staging/vt6655/TODO +++ b/drivers/staging/vt6655/TODO @@ -16,6 +16,5 @@ TODO: - sparse fixes - integrate with drivers/net/wireless -Please send any patches to Greg Kroah-Hartman , -Forest Bond and Bartlomiej Zolnierkiewicz -. +Please send any patches to Greg Kroah-Hartman +and Forest Bond . diff --git a/drivers/staging/vt6656/TODO b/drivers/staging/vt6656/TODO index 17cf50c6735e..a318995ba07f 100644 --- a/drivers/staging/vt6656/TODO +++ b/drivers/staging/vt6656/TODO @@ -15,6 +15,5 @@ TODO: - sparse fixes - integrate with drivers/net/wireless -Please send any patches to Greg Kroah-Hartman , -Forest Bond and Bartlomiej Zolnierkiewicz -. +Please send any patches to Greg Kroah-Hartman +and Forest Bond . From c2f6595fbdb408d3d6850cfae590c8fa93e27399 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 18 Nov 2009 11:37:15 -0500 Subject: [PATCH 697/743] USB: EHCI: don't send Clear-TT-Buffer following a STALL This patch (as1304) fixes a regression in ehci-hcd. Evidently some hubs don't handle Clear-TT-Buffer requests correctly, so we should avoid sending them when they don't appear to be absolutely necessary. The reported symptom is that output on a downstream audio device cuts out because the hub stops relaying isochronous packets. The patch prevents Clear-TT-Buffer requests from being sent following a STALL handshake. In theory a STALL indicates either that the downstream device sent a STALL or that no matching TT buffer could be found. In either case, the transfer is completed and the TT buffer does not remain busy, so it doesn't need to be cleared. Also, the patch fixes a minor flaw in the code that actually sends the Clear-TT-Buffer requests. Although the pipe direction isn't really used for control transfers, it should be a Send rather than a Receive. Signed-off-by: Alan Stern Reported-by: Javier Kohen CC: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 2 +- drivers/usb/host/ehci-q.c | 16 ++++++++++++++-- 2 files changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 5ce839137ad6..0f857e645058 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -444,7 +444,7 @@ resubmit: static inline int hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt) { - return usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), + return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo, tt, NULL, 0, 1000); } diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 00ad9ce392ed..139a2cc3f641 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -487,8 +487,20 @@ halt: * we must clear the TT buffer (11.17.5). */ if (unlikely(last_status != -EINPROGRESS && - last_status != -EREMOTEIO)) - ehci_clear_tt_buffer(ehci, qh, urb, token); + last_status != -EREMOTEIO)) { + /* The TT's in some hubs malfunction when they + * receive this request following a STALL (they + * stop sending isochronous packets). Since a + * STALL can't leave the TT buffer in a busy + * state (if you believe Figures 11-48 - 11-51 + * in the USB 2.0 spec), we won't clear the TT + * buffer in this case. Strictly speaking this + * is a violation of the spec. + */ + if (last_status != -EPIPE) + ehci_clear_tt_buffer(ehci, qh, urb, + token); + } } /* if we're removing something not at the queue head, From cea83241b3a84499c4f9b12f8288f787e7aa6383 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Nov 2009 22:51:18 +0300 Subject: [PATCH 698/743] USB: musb_gadget: fix STALL handling The driver incorrectly cancels the mass-storage device CSW request (which leads to device reset) due to giving back URB at the head of endpoint's queue after sending each STALL handshake; stop doing that and start checking for the queue being non-empty before stalling an endpoint and disallowing stall in such case in musb_gadget_set_halt() like the other gadget drivers do. Moreover, the driver starts Rx request despite of the endpoint being halted -- fix this by moving the SendStall bit check from musb_g_rx() to rxstate(). And we also sometimes get into rxstate() with DMA still active after clearing an endpoint's halt (not clear why), so bail out in this case, similarly to what txstate() does... While at it, also do the following changes : - in musb_gadget_set_halt(), remove pointless Tx FIFO flushing (the driver does not allow stalling with non-empty Tx FIFO anyway); - in rxstate(), stop pointlessly zeroing the 'csr' variable; - in musb_gadget_set_halt(), move the 'done' label to a more proper place; - in musb_g_rx(), eliminate the 'done' label completely... Signed-off-by: Sergei Shtylyov Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 79 +++++++++++++++------------------- 1 file changed, 34 insertions(+), 45 deletions(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 8b3c4e2ed7b8..74073f9a43f0 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -4,6 +4,7 @@ * Copyright 2005 Mentor Graphics Corporation * Copyright (C) 2005-2006 by Texas Instruments * Copyright (C) 2006-2007 Nokia Corporation + * Copyright (C) 2009 MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -436,14 +437,6 @@ void musb_g_tx(struct musb *musb, u8 epnum) csr |= MUSB_TXCSR_P_WZC_BITS; csr &= ~MUSB_TXCSR_P_SENTSTALL; musb_writew(epio, MUSB_TXCSR, csr); - if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { - dma->status = MUSB_DMA_STATUS_CORE_ABORT; - musb->dma_controller->channel_abort(dma); - } - - if (request) - musb_g_giveback(musb_ep, request, -EPIPE); - break; } @@ -582,15 +575,25 @@ void musb_g_tx(struct musb *musb, u8 epnum) */ static void rxstate(struct musb *musb, struct musb_request *req) { - u16 csr = 0; const u8 epnum = req->epnum; struct usb_request *request = &req->request; struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out; void __iomem *epio = musb->endpoints[epnum].regs; unsigned fifo_count = 0; u16 len = musb_ep->packet_sz; + u16 csr = musb_readw(epio, MUSB_RXCSR); - csr = musb_readw(epio, MUSB_RXCSR); + /* We shouldn't get here while DMA is active, but we do... */ + if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) { + DBG(4, "DMA pending...\n"); + return; + } + + if (csr & MUSB_RXCSR_P_SENDSTALL) { + DBG(5, "%s stalling, RXCSR %04x\n", + musb_ep->end_point.name, csr); + return; + } if (is_cppi_enabled() && musb_ep->dma) { struct dma_controller *c = musb->dma_controller; @@ -761,19 +764,10 @@ void musb_g_rx(struct musb *musb, u8 epnum) csr, dma ? " (dma)" : "", request); if (csr & MUSB_RXCSR_P_SENTSTALL) { - if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { - dma->status = MUSB_DMA_STATUS_CORE_ABORT; - (void) musb->dma_controller->channel_abort(dma); - request->actual += musb_ep->dma->actual_len; - } - csr |= MUSB_RXCSR_P_WZC_BITS; csr &= ~MUSB_RXCSR_P_SENTSTALL; musb_writew(epio, MUSB_RXCSR, csr); - - if (request) - musb_g_giveback(musb_ep, request, -EPIPE); - goto done; + return; } if (csr & MUSB_RXCSR_P_OVERRUN) { @@ -795,7 +789,7 @@ void musb_g_rx(struct musb *musb, u8 epnum) DBG((csr & MUSB_RXCSR_DMAENAB) ? 4 : 1, "%s busy, csr %04x\n", musb_ep->end_point.name, csr); - goto done; + return; } if (dma && (csr & MUSB_RXCSR_DMAENAB)) { @@ -826,22 +820,15 @@ void musb_g_rx(struct musb *musb, u8 epnum) if ((request->actual < request->length) && (musb_ep->dma->actual_len == musb_ep->packet_sz)) - goto done; + return; #endif musb_g_giveback(musb_ep, request, 0); request = next_request(musb_ep); if (!request) - goto done; - - /* don't start more i/o till the stall clears */ - musb_ep_select(mbase, epnum); - csr = musb_readw(epio, MUSB_RXCSR); - if (csr & MUSB_RXCSR_P_SENDSTALL) - goto done; + return; } - /* analyze request if the ep is hot */ if (request) rxstate(musb, to_musb_request(request)); @@ -849,8 +836,6 @@ void musb_g_rx(struct musb *musb, u8 epnum) DBG(3, "packet waiting for %s%s request\n", musb_ep->desc ? "" : "inactive ", musb_ep->end_point.name); - -done: return; } @@ -1244,7 +1229,7 @@ int musb_gadget_set_halt(struct usb_ep *ep, int value) void __iomem *mbase; unsigned long flags; u16 csr; - struct musb_request *request = NULL; + struct musb_request *request; int status = 0; if (!ep) @@ -1260,24 +1245,29 @@ int musb_gadget_set_halt(struct usb_ep *ep, int value) musb_ep_select(mbase, epnum); - /* cannot portably stall with non-empty FIFO */ request = to_musb_request(next_request(musb_ep)); - if (value && musb_ep->is_in) { - csr = musb_readw(epio, MUSB_TXCSR); - if (csr & MUSB_TXCSR_FIFONOTEMPTY) { - DBG(3, "%s fifo busy, cannot halt\n", ep->name); - spin_unlock_irqrestore(&musb->lock, flags); - return -EAGAIN; + if (value) { + if (request) { + DBG(3, "request in progress, cannot halt %s\n", + ep->name); + status = -EAGAIN; + goto done; + } + /* Cannot portably stall with non-empty FIFO */ + if (musb_ep->is_in) { + csr = musb_readw(epio, MUSB_TXCSR); + if (csr & MUSB_TXCSR_FIFONOTEMPTY) { + DBG(3, "FIFO busy, cannot halt %s\n", ep->name); + status = -EAGAIN; + goto done; + } } - } /* set/clear the stall and toggle bits */ DBG(2, "%s: %s stall\n", ep->name, value ? "set" : "clear"); if (musb_ep->is_in) { csr = musb_readw(epio, MUSB_TXCSR); - if (csr & MUSB_TXCSR_FIFONOTEMPTY) - csr |= MUSB_TXCSR_FLUSHFIFO; csr |= MUSB_TXCSR_P_WZC_BITS | MUSB_TXCSR_CLRDATATOG; if (value) @@ -1300,14 +1290,13 @@ int musb_gadget_set_halt(struct usb_ep *ep, int value) musb_writew(epio, MUSB_RXCSR, csr); } -done: - /* maybe start the first request in the queue */ if (!musb_ep->busy && !value && request) { DBG(3, "restarting the request\n"); musb_ep_restart(musb, request); } +done: spin_unlock_irqrestore(&musb->lock, flags); return status; } From 0de6ab8b91f2e1e8e7fc66a8b5c5e8ca82ea16b7 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Tue, 17 Nov 2009 19:10:48 -0800 Subject: [PATCH 699/743] USB: ftdi_sio: Keep going when write errors are encountered. The use of urb->actual_length to update tx_outstanding_bytes implicitly assumes that the number of bytes actually written is the same as the number of bytes we tried to write. On error that assumption is violated so just use transfer_buffer_length the number of bytes we intended to write to the device. If an error occurs we need to fall through and call usb_serial_port_softint to wake up processes waiting in tty_wait_until_sent. Signed-off-by: Eric W. Biederman Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 9c60d6d4908a..ebcc6d0e2e91 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1937,7 +1937,7 @@ static void ftdi_write_bulk_callback(struct urb *urb) return; } /* account for transferred data */ - countback = urb->actual_length; + countback = urb->transfer_buffer_length; data_offset = priv->write_offset; if (data_offset > 0) { /* Subtract the control bytes */ @@ -1950,7 +1950,6 @@ static void ftdi_write_bulk_callback(struct urb *urb) if (status) { dbg("nonzero write bulk status received: %d", status); - return; } usb_serial_port_softint(port); From c5deb832d7a3f9618b09e6eeaa91a1a845c90c65 Mon Sep 17 00:00:00 2001 From: Thomas Dahlmann Date: Tue, 17 Nov 2009 14:18:27 -0800 Subject: [PATCH 700/743] usb: amd5536udc: fixed shared interrupt bug and warning oops - fixed shared interrupt bug reported by Vadim Lobanov - fixed possible warning oops on driver unload when connected - prevent interrupt flood in PIO mode ("modprobe amd5536udc use_dma=0") when using gadget ether Signed-off-by: Thomas Dahlmann Cc: Robert Richter Cc: David Brownell Cc: stable Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/amd5536udc.c | 49 ++++++++++++++++++++------------- 1 file changed, 30 insertions(+), 19 deletions(-) diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index d5b65962dd36..731150d4b1d9 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -1213,7 +1213,12 @@ udc_queue(struct usb_ep *usbep, struct usb_request *usbreq, gfp_t gfp) tmp &= AMD_UNMASK_BIT(ep->num); writel(tmp, &dev->regs->ep_irqmsk); } - } + } else if (ep->in) { + /* enable ep irq */ + tmp = readl(&dev->regs->ep_irqmsk); + tmp &= AMD_UNMASK_BIT(ep->num); + writel(tmp, &dev->regs->ep_irqmsk); + } } else if (ep->dma) { @@ -2005,18 +2010,17 @@ __acquires(dev->lock) { int tmp; - /* empty queues and init hardware */ - udc_basic_init(dev); - for (tmp = 0; tmp < UDC_EP_NUM; tmp++) { - empty_req_queue(&dev->ep[tmp]); - } - if (dev->gadget.speed != USB_SPEED_UNKNOWN) { spin_unlock(&dev->lock); driver->disconnect(&dev->gadget); spin_lock(&dev->lock); } - /* init */ + + /* empty queues and init hardware */ + udc_basic_init(dev); + for (tmp = 0; tmp < UDC_EP_NUM; tmp++) + empty_req_queue(&dev->ep[tmp]); + udc_setup_endpoints(dev); } @@ -2472,6 +2476,13 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix) } } + } else if (!use_dma && ep->in) { + /* disable interrupt */ + tmp = readl( + &dev->regs->ep_irqmsk); + tmp |= AMD_BIT(ep->num); + writel(tmp, + &dev->regs->ep_irqmsk); } } /* clear status bits */ @@ -3279,6 +3290,17 @@ static int udc_pci_probe( goto finished; } + spin_lock_init(&dev->lock); + /* udc csr registers base */ + dev->csr = dev->virt_addr + UDC_CSR_ADDR; + /* dev registers base */ + dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR; + /* ep registers base */ + dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR; + /* fifo's base */ + dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR); + dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR); + if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) { dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq); kfree(dev); @@ -3331,7 +3353,6 @@ static int udc_probe(struct udc *dev) udc_pollstall_timer.data = 0; /* device struct setup */ - spin_lock_init(&dev->lock); dev->gadget.ops = &udc_ops; dev_set_name(&dev->gadget.dev, "gadget"); @@ -3340,16 +3361,6 @@ static int udc_probe(struct udc *dev) dev->gadget.name = name; dev->gadget.is_dualspeed = 1; - /* udc csr registers base */ - dev->csr = dev->virt_addr + UDC_CSR_ADDR; - /* dev registers base */ - dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR; - /* ep registers base */ - dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR; - /* fifo's base */ - dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR); - dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR); - /* init registers, interrupts, ... */ startup_registers(dev); From 1230435c258e34b47ab7adc3db572c88a284234a Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Tue, 17 Nov 2009 15:22:54 +0530 Subject: [PATCH 701/743] USB: musb: Remove unwanted message in boot log Removes below unnecessary log of almost 28 lines during boot. musb_hdrc: hw_ep 0shared, max 64 musb_hdrc: hw_ep 1tx, max 512 musb_hdrc: hw_ep 1rx, max 512 ... ... musb_hdrc: hw_ep 13shared, max 4096 musb_hdrc: hw_ep 14shared, max 1024 musb_hdrc: hw_ep 15shared, max 1024 Signed-off-by: Ajay Kumar Gupta Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 3a61ddb62bd2..547e0e390726 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1450,7 +1450,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) #endif if (hw_ep->max_packet_sz_tx) { - printk(KERN_DEBUG + DBG(1, "%s: hw_ep %d%s, %smax %d\n", musb_driver_name, i, hw_ep->is_shared_fifo ? "shared" : "tx", @@ -1459,7 +1459,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) hw_ep->max_packet_sz_tx); } if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) { - printk(KERN_DEBUG + DBG(1, "%s: hw_ep %d%s, %smax %d\n", musb_driver_name, i, "rx", From dfeffa531ccf9c31f2f55df6d7ca86eec92142df Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Tue, 17 Nov 2009 15:22:55 +0530 Subject: [PATCH 702/743] USB: musb: fix ISOC Tx programming for CPPI DMAs Isochronous Tx DMA is getting programmed but never getting started for CPPI and TUSB DMAs and thus Isochronous Tx doesn't work. Fixing it by starting DMAs using musb_h_tx_dma_start(). Signed-off-by: Swaminathan S Signed-off-by: Babu Ravi Signed-off-by: Ajay Kumar Gupta Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index cf94511485f2..e3ab40a966eb 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1301,8 +1301,11 @@ void musb_host_tx(struct musb *musb, u8 epnum) return; } else if (usb_pipeisoc(pipe) && dma) { if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb, - offset, length)) + offset, length)) { + if (is_cppi_enabled() || tusb_dma_omap()) + musb_h_tx_dma_start(hw_ep); return; + } } else if (tx_csr & MUSB_TXCSR_DMAENAB) { DBG(1, "not complete, but DMA enabled?\n"); return; From 5542bc2ac7b52c021fc9c7a96329955491b7e763 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Daniel=20Gl=C3=B6ckner?= Date: Tue, 17 Nov 2009 15:22:56 +0530 Subject: [PATCH 703/743] USB: musb: respect usb_request->zero in control requests MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In gadget mode the answer to a control request should be followed by a zero-length packet if the amount transferred is an exact multiple of the endpoint's packet size and the requests has its "zero" flag set. This patch prevents the request from being immediately removed from the queue when a control IN transfer ends on a full packet and "zero" is set. The next time ep0_txstate is entered, a zero-length packet is queued and the request is removed as fifo_count is 0. Signed-off-by: Daniel Glöckner Signed-off-by: Ajay Kumar Gupta Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget_ep0.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index 7a6778675ad3..522efb31b56b 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -511,7 +511,8 @@ static void ep0_txstate(struct musb *musb) /* update the flags */ if (fifo_count < MUSB_MAX_END0_PACKET - || request->actual == request->length) { + || (request->actual == request->length + && !request->zero)) { musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT; csr |= MUSB_CSR0_P_DATAEND; } else From 8d6499e5bde91ad05dea4f666bdfe79e65e7cf96 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Daniel=20Gl=C3=B6ckner?= Date: Tue, 17 Nov 2009 15:22:57 +0530 Subject: [PATCH 704/743] USB: musb: Fix CPPI IRQs not being signaled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On tx channel abort a cppi interrupt is generated for a short time by setting the lowest bit of the TCPPICOMPPTR register. It is then reset immediately by clearing the bit. When the interrupt handler is run, it does not detect an interrupt in the TCPPIMSKSR or RCPPIMSKSR registers and thus exits early without writing the TCPPIEOIR register. It appears that this inhibits further cppi interrupts until the handler is called by chance, f.ex. from davinci_interrupt(). By moving the unmasking of the interrupt below the writes to TCPPICOMPPTR, no interrupt is generated and no write to TCPPIEOIR is necessary. Signed-off-by: Daniel Glöckner Signed-off-by: Ajay Kumar Gupta Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/cppi_dma.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index c3577bbbae6c..ef2332a9941d 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1442,11 +1442,6 @@ static int cppi_channel_abort(struct dma_channel *channel) musb_writew(regs, MUSB_TXCSR, value); musb_writew(regs, MUSB_TXCSR, value); - /* re-enable interrupt */ - if (enabled) - musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG, - (1 << cppi_ch->index)); - /* While we scrub the TX state RAM, ensure that we clean * up any interrupt that's currently asserted: * 1. Write to completion Ptr value 0x1(bit 0 set) @@ -1459,6 +1454,11 @@ static int cppi_channel_abort(struct dma_channel *channel) cppi_reset_tx(tx_ram, 1); musb_writel(&tx_ram->tx_complete, 0, 0); + /* re-enable interrupt */ + if (enabled) + musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG, + (1 << cppi_ch->index)); + cppi_dump_tx(5, cppi_ch, " (done teardown)"); /* REVISIT tx side _should_ clean up the same way From ee4ecb8ac63a5792bec448037d4b82ec4144f94b Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 27 Nov 2009 15:17:59 +0100 Subject: [PATCH 705/743] USB: work around for EHCI with quirky periodic schedules a quirky chipset needs periodic schedules to run for a minimum time before they can be disabled again. This enforces the requirement with a time stamp and a calculated delay Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 2 ++ drivers/usb/host/ehci-pci.c | 4 ++++ drivers/usb/host/ehci-sched.c | 12 ++++++++++++ drivers/usb/host/ehci.h | 2 ++ 4 files changed, 20 insertions(+) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 9835e0713943..f5f5601701c9 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -676,6 +677,7 @@ static int ehci_run (struct usb_hcd *hcd) ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ msleep(5); up_write(&ehci_cf_port_reset_rwsem); + ehci->last_periodic_enable = ktime_get_real(); temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase)); ehci_info (ehci, diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 378861b9d79a..ead5f4f2aa5a 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -111,6 +111,10 @@ static int ehci_pci_setup(struct usb_hcd *hcd) switch (pdev->vendor) { case PCI_VENDOR_ID_INTEL: ehci->need_io_watchdog = 0; + if (pdev->device == 0x27cc) { + ehci->broken_periodic = 1; + ehci_info(ehci, "using broken periodic workaround\n"); + } break; case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index b25cdea93a1f..a5535b5e3fe2 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -475,6 +475,8 @@ static int enable_periodic (struct ehci_hcd *ehci) /* make sure ehci_work scans these */ ehci->next_uframe = ehci_readl(ehci, &ehci->regs->frame_index) % (ehci->periodic_size << 3); + if (unlikely(ehci->broken_periodic)) + ehci->last_periodic_enable = ktime_get_real(); return 0; } @@ -486,6 +488,16 @@ static int disable_periodic (struct ehci_hcd *ehci) if (--ehci->periodic_sched) return 0; + if (unlikely(ehci->broken_periodic)) { + /* delay experimentally determined */ + ktime_t safe = ktime_add_us(ehci->last_periodic_enable, 1000); + ktime_t now = ktime_get_real(); + s64 delay = ktime_us_delta(safe, now); + + if (unlikely(delay > 0)) + udelay(delay); + } + /* did setting PSE not take effect yet? * takes effect only at frame boundaries... */ diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 064e76821ff5..2d85e21ff282 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -118,6 +118,7 @@ struct ehci_hcd { /* one per controller */ unsigned stamp; unsigned random_frame; unsigned long next_statechange; + ktime_t last_periodic_enable; u32 command; /* SILICON QUIRKS */ @@ -127,6 +128,7 @@ struct ehci_hcd { /* one per controller */ unsigned big_endian_desc:1; unsigned has_amcc_usb23:1; unsigned need_io_watchdog:1; + unsigned broken_periodic:1; /* required for usb32 quirk */ #define OHCI_CTRL_HCFS (3 << 6) From 0ec8648379334f1e127ebd5e57a625890f116824 Mon Sep 17 00:00:00 2001 From: Gernot Hillier Date: Fri, 27 Nov 2009 13:49:23 +0100 Subject: [PATCH 706/743] USB: Add support for Mobilcom Debitel USB UMTS Surf-Stick to option driver This patch adds the vendor and device id for the Mobilcom Debitel UMTS surf stick (a.k.a. 4G Systems XSStick W14, MobiData MBD-200HU, ...). To see these ids, you need to switch the stick to modem operation first with the help of usb_modeswitch. This makes it switch from 1c9e:f000 to 1c9e:9603 and thus be recognized by the option driver. Signed-off-by: Gernot Hillier Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 319aaf9725b3..0577e4b61114 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -336,6 +336,10 @@ static int option_resume(struct usb_serial *serial); #define AIRPLUS_VENDOR_ID 0x1011 #define AIRPLUS_PRODUCT_MCD650 0x3198 +/* 4G Systems products */ +#define FOUR_G_SYSTEMS_VENDOR_ID 0x1c9e +#define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603 + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -599,6 +603,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, + { USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); From 745dd2405e281d96c0a449103bdf6a895048f28c Mon Sep 17 00:00:00 2001 From: Michael Cree Date: Mon, 30 Nov 2009 22:44:40 -0500 Subject: [PATCH 707/743] Alpha: Rearrange thread info flags fixing two regressions The removal of the TIF_NOTIFY_RESUME flag, commit a583f1b54249b "remove unused TIF_NOTIFY_RESUME flag," resulted in incorrect setting of the unaligned access control flags by the prctl syscall. The re-addition of the TIF_NOTIFY_RESUME flag, commit d0420c83f39f "KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures [try #6]" further caused problems, namely incorrect operands to assembler code as evidenced by: AS arch/alpha/kernel/entry.o arch/alpha/kernel/entry.S: Assembler messages: arch/alpha/kernel/entry.S:326: Warning: operand out of range (0x0000000000000406 is not between 0x0000000000000000 and 0x00000000000000ff) Both regressions fixed by (1) rearranging TIF_NOTIFY_RESUME flag to be in lower 8 bits of the thread info flags, and (2) making sure that ALPHA_UAC_SHIFT matches the rearrangement of the thread info flags. Signed-off-by: Michael Cree Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: David Howells , Signed-off-by: Matt Turner --- arch/alpha/include/asm/thread_info.h | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h index 815680b585ed..b3e888638bb7 100644 --- a/arch/alpha/include/asm/thread_info.h +++ b/arch/alpha/include/asm/thread_info.h @@ -61,21 +61,24 @@ register struct thread_info *__current_thread_info __asm__("$8"); /* * Thread information flags: * - these are process state flags and used from assembly - * - pending work-to-be-done flags come first to fit in and immediate operand. + * - pending work-to-be-done flags come first and must be assigned to be + * within bits 0 to 7 to fit in and immediate operand. + * - ALPHA_UAC_SHIFT below must be kept consistent with the unaligned + * control flags. * * TIF_SYSCALL_TRACE is known to be 0 via blbs. */ #define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_POLLING_NRFLAG 3 /* poll_idle is polling NEED_RESCHED */ -#define TIF_DIE_IF_KERNEL 4 /* dik recursion lock */ -#define TIF_UAC_NOPRINT 5 /* see sysinfo.h */ -#define TIF_UAC_NOFIX 6 -#define TIF_UAC_SIGBUS 7 -#define TIF_MEMDIE 8 -#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */ -#define TIF_NOTIFY_RESUME 10 /* callback before returning to user */ +#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_POLLING_NRFLAG 8 /* poll_idle is polling NEED_RESCHED */ +#define TIF_DIE_IF_KERNEL 9 /* dik recursion lock */ +#define TIF_UAC_NOPRINT 10 /* see sysinfo.h */ +#define TIF_UAC_NOFIX 11 +#define TIF_UAC_SIGBUS 12 +#define TIF_MEMDIE 13 +#define TIF_RESTORE_SIGMASK 14 /* restore signal mask in do_signal */ #define TIF_FREEZE 16 /* is freezing for suspend */ #define _TIF_SYSCALL_TRACE (1< Date: Mon, 30 Nov 2009 22:51:31 -0500 Subject: [PATCH 708/743] alpha: Fixup last users of irq_chip->typename The typename member of struct irq_chip was kept for migration purposes and is obsolete since more than 2 years. Fix up the leftovers. Signed-off-by: Thomas Gleixner Cc: Richard Henderson Cc: linux-alpha@vger.kernel.org Signed-off-by: Matt Turner --- arch/alpha/kernel/irq.c | 2 +- arch/alpha/kernel/irq_alpha.c | 2 +- arch/alpha/kernel/irq_i8259.c | 2 +- arch/alpha/kernel/irq_pyxis.c | 2 +- arch/alpha/kernel/irq_srm.c | 2 +- arch/alpha/kernel/sys_alcor.c | 2 +- arch/alpha/kernel/sys_cabriolet.c | 2 +- arch/alpha/kernel/sys_dp264.c | 4 ++-- arch/alpha/kernel/sys_eb64p.c | 2 +- arch/alpha/kernel/sys_eiger.c | 2 +- arch/alpha/kernel/sys_jensen.c | 2 +- arch/alpha/kernel/sys_marvel.c | 6 +++--- arch/alpha/kernel/sys_mikasa.c | 2 +- arch/alpha/kernel/sys_noritake.c | 2 +- arch/alpha/kernel/sys_rawhide.c | 2 +- arch/alpha/kernel/sys_rx164.c | 2 +- arch/alpha/kernel/sys_sable.c | 2 +- arch/alpha/kernel/sys_takara.c | 2 +- arch/alpha/kernel/sys_titan.c | 2 +- arch/alpha/kernel/sys_wildfire.c | 2 +- 20 files changed, 23 insertions(+), 23 deletions(-) diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c index cc7834661427..c0de072b8305 100644 --- a/arch/alpha/kernel/irq.c +++ b/arch/alpha/kernel/irq.c @@ -92,7 +92,7 @@ show_interrupts(struct seq_file *p, void *v) for_each_online_cpu(j) seq_printf(p, "%10u ", kstat_irqs_cpu(irq, j)); #endif - seq_printf(p, " %14s", irq_desc[irq].chip->typename); + seq_printf(p, " %14s", irq_desc[irq].chip->name); seq_printf(p, " %c%s", (action->flags & IRQF_DISABLED)?'+':' ', action->name); diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c index 38c805dfc544..cfde865b78e0 100644 --- a/arch/alpha/kernel/irq_alpha.c +++ b/arch/alpha/kernel/irq_alpha.c @@ -228,7 +228,7 @@ struct irqaction timer_irqaction = { }; static struct irq_chip rtc_irq_type = { - .typename = "RTC", + .name = "RTC", .startup = rtc_startup, .shutdown = rtc_enable_disable, .enable = rtc_enable_disable, diff --git a/arch/alpha/kernel/irq_i8259.c b/arch/alpha/kernel/irq_i8259.c index 50bfec9b588f..83a9ac280890 100644 --- a/arch/alpha/kernel/irq_i8259.c +++ b/arch/alpha/kernel/irq_i8259.c @@ -84,7 +84,7 @@ i8259a_end_irq(unsigned int irq) } struct irq_chip i8259a_irq_type = { - .typename = "XT-PIC", + .name = "XT-PIC", .startup = i8259a_startup_irq, .shutdown = i8259a_disable_irq, .enable = i8259a_enable_irq, diff --git a/arch/alpha/kernel/irq_pyxis.c b/arch/alpha/kernel/irq_pyxis.c index 69199a76ec4a..989ce46a0cf3 100644 --- a/arch/alpha/kernel/irq_pyxis.c +++ b/arch/alpha/kernel/irq_pyxis.c @@ -71,7 +71,7 @@ pyxis_mask_and_ack_irq(unsigned int irq) } static struct irq_chip pyxis_irq_type = { - .typename = "PYXIS", + .name = "PYXIS", .startup = pyxis_startup_irq, .shutdown = pyxis_disable_irq, .enable = pyxis_enable_irq, diff --git a/arch/alpha/kernel/irq_srm.c b/arch/alpha/kernel/irq_srm.c index 85229369a1f8..d63e93e1e8bf 100644 --- a/arch/alpha/kernel/irq_srm.c +++ b/arch/alpha/kernel/irq_srm.c @@ -49,7 +49,7 @@ srm_end_irq(unsigned int irq) /* Handle interrupts from the SRM, assuming no additional weirdness. */ static struct irq_chip srm_irq_type = { - .typename = "SRM", + .name = "SRM", .startup = srm_startup_irq, .shutdown = srm_disable_irq, .enable = srm_enable_irq, diff --git a/arch/alpha/kernel/sys_alcor.c b/arch/alpha/kernel/sys_alcor.c index 382035ef7394..20a30b8b9655 100644 --- a/arch/alpha/kernel/sys_alcor.c +++ b/arch/alpha/kernel/sys_alcor.c @@ -90,7 +90,7 @@ alcor_end_irq(unsigned int irq) } static struct irq_chip alcor_irq_type = { - .typename = "ALCOR", + .name = "ALCOR", .startup = alcor_startup_irq, .shutdown = alcor_disable_irq, .enable = alcor_enable_irq, diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c index ed349436732b..affd0f3f25df 100644 --- a/arch/alpha/kernel/sys_cabriolet.c +++ b/arch/alpha/kernel/sys_cabriolet.c @@ -72,7 +72,7 @@ cabriolet_end_irq(unsigned int irq) } static struct irq_chip cabriolet_irq_type = { - .typename = "CABRIOLET", + .name = "CABRIOLET", .startup = cabriolet_startup_irq, .shutdown = cabriolet_disable_irq, .enable = cabriolet_enable_irq, diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c index 46e70ece5176..d64e1e497e76 100644 --- a/arch/alpha/kernel/sys_dp264.c +++ b/arch/alpha/kernel/sys_dp264.c @@ -199,7 +199,7 @@ clipper_set_affinity(unsigned int irq, const struct cpumask *affinity) } static struct irq_chip dp264_irq_type = { - .typename = "DP264", + .name = "DP264", .startup = dp264_startup_irq, .shutdown = dp264_disable_irq, .enable = dp264_enable_irq, @@ -210,7 +210,7 @@ static struct irq_chip dp264_irq_type = { }; static struct irq_chip clipper_irq_type = { - .typename = "CLIPPER", + .name = "CLIPPER", .startup = clipper_startup_irq, .shutdown = clipper_disable_irq, .enable = clipper_enable_irq, diff --git a/arch/alpha/kernel/sys_eb64p.c b/arch/alpha/kernel/sys_eb64p.c index 660c23ef661f..df2090ce5e7f 100644 --- a/arch/alpha/kernel/sys_eb64p.c +++ b/arch/alpha/kernel/sys_eb64p.c @@ -70,7 +70,7 @@ eb64p_end_irq(unsigned int irq) } static struct irq_chip eb64p_irq_type = { - .typename = "EB64P", + .name = "EB64P", .startup = eb64p_startup_irq, .shutdown = eb64p_disable_irq, .enable = eb64p_enable_irq, diff --git a/arch/alpha/kernel/sys_eiger.c b/arch/alpha/kernel/sys_eiger.c index b99ea488d844..3ca1dbcf4044 100644 --- a/arch/alpha/kernel/sys_eiger.c +++ b/arch/alpha/kernel/sys_eiger.c @@ -81,7 +81,7 @@ eiger_end_irq(unsigned int irq) } static struct irq_chip eiger_irq_type = { - .typename = "EIGER", + .name = "EIGER", .startup = eiger_startup_irq, .shutdown = eiger_disable_irq, .enable = eiger_enable_irq, diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c index ef0b83a070ac..7a7ae36fff91 100644 --- a/arch/alpha/kernel/sys_jensen.c +++ b/arch/alpha/kernel/sys_jensen.c @@ -119,7 +119,7 @@ jensen_local_end(unsigned int irq) } static struct irq_chip jensen_local_irq_type = { - .typename = "LOCAL", + .name = "LOCAL", .startup = jensen_local_startup, .shutdown = jensen_local_shutdown, .enable = jensen_local_enable, diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c index bbfc4f20ca72..0bb3b5c4f693 100644 --- a/arch/alpha/kernel/sys_marvel.c +++ b/arch/alpha/kernel/sys_marvel.c @@ -170,7 +170,7 @@ marvel_irq_noop_return(unsigned int irq) } static struct irq_chip marvel_legacy_irq_type = { - .typename = "LEGACY", + .name = "LEGACY", .startup = marvel_irq_noop_return, .shutdown = marvel_irq_noop, .enable = marvel_irq_noop, @@ -180,7 +180,7 @@ static struct irq_chip marvel_legacy_irq_type = { }; static struct irq_chip io7_lsi_irq_type = { - .typename = "LSI", + .name = "LSI", .startup = io7_startup_irq, .shutdown = io7_disable_irq, .enable = io7_enable_irq, @@ -190,7 +190,7 @@ static struct irq_chip io7_lsi_irq_type = { }; static struct irq_chip io7_msi_irq_type = { - .typename = "MSI", + .name = "MSI", .startup = io7_startup_irq, .shutdown = io7_disable_irq, .enable = io7_enable_irq, diff --git a/arch/alpha/kernel/sys_mikasa.c b/arch/alpha/kernel/sys_mikasa.c index 4e366641a08e..ee8865169811 100644 --- a/arch/alpha/kernel/sys_mikasa.c +++ b/arch/alpha/kernel/sys_mikasa.c @@ -69,7 +69,7 @@ mikasa_end_irq(unsigned int irq) } static struct irq_chip mikasa_irq_type = { - .typename = "MIKASA", + .name = "MIKASA", .startup = mikasa_startup_irq, .shutdown = mikasa_disable_irq, .enable = mikasa_enable_irq, diff --git a/arch/alpha/kernel/sys_noritake.c b/arch/alpha/kernel/sys_noritake.c index 35753a173bac..86503fe73a88 100644 --- a/arch/alpha/kernel/sys_noritake.c +++ b/arch/alpha/kernel/sys_noritake.c @@ -74,7 +74,7 @@ noritake_end_irq(unsigned int irq) } static struct irq_chip noritake_irq_type = { - .typename = "NORITAKE", + .name = "NORITAKE", .startup = noritake_startup_irq, .shutdown = noritake_disable_irq, .enable = noritake_enable_irq, diff --git a/arch/alpha/kernel/sys_rawhide.c b/arch/alpha/kernel/sys_rawhide.c index f3aec7e085c8..26c322bf89ee 100644 --- a/arch/alpha/kernel/sys_rawhide.c +++ b/arch/alpha/kernel/sys_rawhide.c @@ -136,7 +136,7 @@ rawhide_end_irq(unsigned int irq) } static struct irq_chip rawhide_irq_type = { - .typename = "RAWHIDE", + .name = "RAWHIDE", .startup = rawhide_startup_irq, .shutdown = rawhide_disable_irq, .enable = rawhide_enable_irq, diff --git a/arch/alpha/kernel/sys_rx164.c b/arch/alpha/kernel/sys_rx164.c index fc9246373452..be161129eab9 100644 --- a/arch/alpha/kernel/sys_rx164.c +++ b/arch/alpha/kernel/sys_rx164.c @@ -73,7 +73,7 @@ rx164_end_irq(unsigned int irq) } static struct irq_chip rx164_irq_type = { - .typename = "RX164", + .name = "RX164", .startup = rx164_startup_irq, .shutdown = rx164_disable_irq, .enable = rx164_enable_irq, diff --git a/arch/alpha/kernel/sys_sable.c b/arch/alpha/kernel/sys_sable.c index 426eb6906d01..b2abe27a23cf 100644 --- a/arch/alpha/kernel/sys_sable.c +++ b/arch/alpha/kernel/sys_sable.c @@ -502,7 +502,7 @@ sable_lynx_mask_and_ack_irq(unsigned int irq) } static struct irq_chip sable_lynx_irq_type = { - .typename = "SABLE/LYNX", + .name = "SABLE/LYNX", .startup = sable_lynx_startup_irq, .shutdown = sable_lynx_disable_irq, .enable = sable_lynx_enable_irq, diff --git a/arch/alpha/kernel/sys_takara.c b/arch/alpha/kernel/sys_takara.c index 830318c21661..230464885b5c 100644 --- a/arch/alpha/kernel/sys_takara.c +++ b/arch/alpha/kernel/sys_takara.c @@ -75,7 +75,7 @@ takara_end_irq(unsigned int irq) } static struct irq_chip takara_irq_type = { - .typename = "TAKARA", + .name = "TAKARA", .startup = takara_startup_irq, .shutdown = takara_disable_irq, .enable = takara_enable_irq, diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c index 88978fc60f83..288053342c83 100644 --- a/arch/alpha/kernel/sys_titan.c +++ b/arch/alpha/kernel/sys_titan.c @@ -195,7 +195,7 @@ init_titan_irqs(struct irq_chip * ops, int imin, int imax) } static struct irq_chip titan_irq_type = { - .typename = "TITAN", + .name = "TITAN", .startup = titan_startup_irq, .shutdown = titan_disable_irq, .enable = titan_enable_irq, diff --git a/arch/alpha/kernel/sys_wildfire.c b/arch/alpha/kernel/sys_wildfire.c index e91b4c3838a8..62fd972e18ef 100644 --- a/arch/alpha/kernel/sys_wildfire.c +++ b/arch/alpha/kernel/sys_wildfire.c @@ -158,7 +158,7 @@ wildfire_end_irq(unsigned int irq) } static struct irq_chip wildfire_irq_type = { - .typename = "WILDFIRE", + .name = "WILDFIRE", .startup = wildfire_startup_irq, .shutdown = wildfire_disable_irq, .enable = wildfire_enable_irq, From d0e260782c3702a009645c3caa02e381dab8798b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 1 Dec 2009 17:30:59 +1100 Subject: [PATCH 709/743] md: revert incorrect fix for read error handling in raid1. commit 4706b349f was a forward port of a fix that was needed for SLES10. But in fact it is not needed in mainline because the earlier commit dd00a99e7a fixes the same problem in a better way. Further, this commit introduces a bug in the way it interacts with the automatic read-error-correction. If, after a read error is successfully corrected, the same disk is chosen to re-read - the re-read won't be attempted but an error will be returned instead. After reverting that commit, there is the possibility that a read error on a read-only array (where read errors cannot be corrected as that requires a write) will repeatedly read the same device and continue to get an error. So in the "Array is readonly" case, fail the drive immediately on a read error. Signed-off-by: NeilBrown Cc: stable@kernel.org --- drivers/md/raid1.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index a053423785c9..e07ce2e033a9 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1650,11 +1650,12 @@ static void raid1d(mddev_t *mddev) r1_bio->sector, r1_bio->sectors); unfreeze_array(conf); - } + } else + md_error(mddev, + conf->mirrors[r1_bio->read_disk].rdev); bio = r1_bio->bios[r1_bio->read_disk]; - if ((disk=read_balance(conf, r1_bio)) == -1 || - disk == r1_bio->read_disk) { + if ((disk=read_balance(conf, r1_bio)) == -1) { printk(KERN_ALERT "raid1: %s: unrecoverable I/O" " read error for block %llu\n", bdevname(bio->bi_bdev,b), From 7716977b6ae5a0cdd0afab5c6035c4d0ce53f599 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 30 Nov 2009 13:24:18 +0000 Subject: [PATCH 710/743] mfd: Correct WM831X_MAX_ISEL_VALUE There was confusion between the array size and the highest ISEL value possible. Reported-by: Dan Carpenter Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-core.c | 2 +- include/linux/mfd/wm831x/regulator.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 49b7885c2702..7f27576ca046 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -29,7 +29,7 @@ /* Current settings - values are 2*2^(reg_val/4) microamps. These are * exported since they are used by multiple drivers. */ -int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL] = { +int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL + 1] = { 2, 2, 3, diff --git a/include/linux/mfd/wm831x/regulator.h b/include/linux/mfd/wm831x/regulator.h index f95466343fb2..955d30fc6a27 100644 --- a/include/linux/mfd/wm831x/regulator.h +++ b/include/linux/mfd/wm831x/regulator.h @@ -1212,7 +1212,7 @@ #define WM831X_LDO1_OK_SHIFT 0 /* LDO1_OK */ #define WM831X_LDO1_OK_WIDTH 1 /* LDO1_OK */ -#define WM831X_ISINK_MAX_ISEL 56 -extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL]; +#define WM831X_ISINK_MAX_ISEL 55 +extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL + 1]; #endif From 6f054164322bc6c1233402b9ed6b40d4af39a98f Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 1 Dec 2009 13:38:45 +0000 Subject: [PATCH 711/743] 9p: fix build breakage introduced by FS-Cache While building 2.6.32-rc8-git2 for Fedora I noticed the following thinko in commit 201a15428bd54f83eccec8b7c64a04b8f9431204 ("FS-Cache: Handle pages pending storage that get evicted under OOM conditions"): fs/9p/cache.c: In function '__v9fs_fscache_release_page': fs/9p/cache.c:346: error: 'vnode' undeclared (first use in this function) fs/9p/cache.c:346: error: (Each undeclared identifier is reported only once fs/9p/cache.c:346: error: for each function it appears in.) make[2]: *** [fs/9p/cache.o] Error 1 Fix the 9P filesystem to correctly construct the argument to fscache_maybe_release_page(). Signed-off-by: Kyle McMartin Signed-off-by: Xiaotian Feng [from identical patch] Signed-off-by: Stefan Lippers-Hollmann [from identical patch] Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- fs/9p/cache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/9p/cache.c b/fs/9p/cache.c index bcc5357a9069..e777961939f3 100644 --- a/fs/9p/cache.c +++ b/fs/9p/cache.c @@ -343,7 +343,7 @@ int __v9fs_fscache_release_page(struct page *page, gfp_t gfp) BUG_ON(!vcookie->fscache); - return fscache_maybe_release_page(vnode->cache, page, gfp); + return fscache_maybe_release_page(vcookie->fscache, page, gfp); } void __v9fs_fscache_invalidate_page(struct page *page) From fa1dae4906982b5d896c07613b1fe42456133b1c Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 1 Dec 2009 13:52:08 +0000 Subject: [PATCH 712/743] SLOW_WORK: Fix the CONFIG_MODULES=n case Commits 3d7a641 ("SLOW_WORK: Wait for outstanding work items belonging to a module to clear") introduced some code to make sure that all of a module's slow-work items were complete before that module was removed, and commit 3bde31a ("SLOW_WORK: Allow a requeueable work item to sleep till the thread is needed") further extended that, breaking it in the process if CONFIG_MODULES=n: CC kernel/slow-work.o kernel/slow-work.c: In function 'slow_work_execute': kernel/slow-work.c:313: error: 'slow_work_thread_processing' undeclared (first use in this function) kernel/slow-work.c:313: error: (Each undeclared identifier is reported only once kernel/slow-work.c:313: error: for each function it appears in.) kernel/slow-work.c: In function 'slow_work_wait_for_items': kernel/slow-work.c:950: error: 'slow_work_unreg_sync_lock' undeclared (first use in this function) kernel/slow-work.c:951: error: 'slow_work_unreg_wq' undeclared (first use in this function) kernel/slow-work.c:961: error: 'slow_work_unreg_work_item' undeclared (first use in this function) kernel/slow-work.c:974: error: 'slow_work_unreg_module' undeclared (first use in this function) kernel/slow-work.c:977: error: 'slow_work_thread_processing' undeclared (first use in this function) make[1]: *** [kernel/slow-work.o] Error 1 Fix this by: (1) Extracting the bits of slow_work_execute() that are contingent on CONFIG_MODULES, and the bits that should be, into inline functions and placing them into the #ifdef'd section that defines the relevant variables and adding stubs for moduleless kernels. This allows the removal of some #ifdefs. (2) #ifdef'ing out the contents of slow_work_wait_for_items() in moduleless kernels. The four functions related to handling module unloading synchronisation (and their associated variables) could be offloaded into a separate .c file, but each function is only used once and three of them are tiny, so doing so would prevent them from being inlined. Reported-by: Ingo Molnar Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- kernel/slow-work.c | 46 +++++++++++++++++++++++++++++----------------- 1 file changed, 29 insertions(+), 17 deletions(-) diff --git a/kernel/slow-work.c b/kernel/slow-work.c index da94f3c101af..b5c17f15f9de 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -109,6 +109,30 @@ static struct module *slow_work_unreg_module; static struct slow_work *slow_work_unreg_work_item; static DECLARE_WAIT_QUEUE_HEAD(slow_work_unreg_wq); static DEFINE_MUTEX(slow_work_unreg_sync_lock); + +static void slow_work_set_thread_processing(int id, struct slow_work *work) +{ + if (work) + slow_work_thread_processing[id] = work->owner; +} +static void slow_work_done_thread_processing(int id, struct slow_work *work) +{ + struct module *module = slow_work_thread_processing[id]; + + slow_work_thread_processing[id] = NULL; + smp_mb(); + if (slow_work_unreg_work_item == work || + slow_work_unreg_module == module) + wake_up_all(&slow_work_unreg_wq); +} +static void slow_work_clear_thread_processing(int id) +{ + slow_work_thread_processing[id] = NULL; +} +#else +static void slow_work_set_thread_processing(int id, struct slow_work *work) {} +static void slow_work_done_thread_processing(int id, struct slow_work *work) {} +static void slow_work_clear_thread_processing(int id) {} #endif /* @@ -197,9 +221,6 @@ static unsigned slow_work_calc_vsmax(void) */ static noinline bool slow_work_execute(int id) { -#ifdef CONFIG_MODULES - struct module *module; -#endif struct slow_work *work = NULL; unsigned vsmax; bool very_slow; @@ -236,10 +257,7 @@ static noinline bool slow_work_execute(int id) very_slow = false; /* avoid the compiler warning */ } -#ifdef CONFIG_MODULES - if (work) - slow_work_thread_processing[id] = work->owner; -#endif + slow_work_set_thread_processing(id, work); if (work) { slow_work_mark_time(work); slow_work_begin_exec(id, work); @@ -287,15 +305,7 @@ static noinline bool slow_work_execute(int id) /* sort out the race between module unloading and put_ref() */ slow_work_put_ref(work); - -#ifdef CONFIG_MODULES - module = slow_work_thread_processing[id]; - slow_work_thread_processing[id] = NULL; - smp_mb(); - if (slow_work_unreg_work_item == work || - slow_work_unreg_module == module) - wake_up_all(&slow_work_unreg_wq); -#endif + slow_work_done_thread_processing(id, work); return true; @@ -310,7 +320,7 @@ auto_requeue: else list_add_tail(&work->link, &slow_work_queue); spin_unlock_irq(&slow_work_queue_lock); - slow_work_thread_processing[id] = NULL; + slow_work_clear_thread_processing(id); return true; } @@ -943,6 +953,7 @@ EXPORT_SYMBOL(slow_work_register_user); */ static void slow_work_wait_for_items(struct module *module) { +#ifdef CONFIG_MODULES DECLARE_WAITQUEUE(myself, current); struct slow_work *work; int loop; @@ -989,6 +1000,7 @@ static void slow_work_wait_for_items(struct module *module) remove_wait_queue(&slow_work_unreg_wq, &myself); mutex_unlock(&slow_work_unreg_sync_lock); +#endif /* CONFIG_MODULES */ } /** From 3350b2acdd39d23db52710045536b943fe38a35c Mon Sep 17 00:00:00 2001 From: Marc Dionne Date: Tue, 1 Dec 2009 14:09:24 +0000 Subject: [PATCH 713/743] CacheFiles: Update IMA counters when using dentry_open When IMA is active, using dentry_open without updating the IMA counters will result in free/open imbalance errors when fput is eventually called. Signed-off-by: Marc Dionne Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- fs/cachefiles/rdwr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c index 1d8332563863..a6c8c6fe8df9 100644 --- a/fs/cachefiles/rdwr.c +++ b/fs/cachefiles/rdwr.c @@ -11,6 +11,7 @@ #include #include +#include #include "internal.h" /* @@ -922,6 +923,7 @@ int cachefiles_write_page(struct fscache_storage *op, struct page *page) if (IS_ERR(file)) { ret = PTR_ERR(file); } else { + ima_counts_get(file); ret = -EIO; if (file->f_op->write) { pos = (loff_t) page->index << PAGE_SHIFT; From f13a48bd798a159291ca583b95453171b88b7448 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 1 Dec 2009 15:36:11 +0000 Subject: [PATCH 714/743] SLOW_WORK: Move slow_work's proc file to debugfs Move slow_work's debugging proc file to debugfs. Signed-off-by: David Howells Requested-and-acked-by: Ingo Molnar Signed-off-by: Linus Torvalds --- Documentation/slow-work.txt | 4 ++-- include/linux/slow-work.h | 8 ++++---- init/Kconfig | 8 ++++---- kernel/Makefile | 2 +- .../{slow-work-proc.c => slow-work-debugfs.c} | 4 ++-- kernel/slow-work.c | 18 ++++++++++++------ kernel/slow-work.h | 6 +++--- 7 files changed, 28 insertions(+), 22 deletions(-) rename kernel/{slow-work-proc.c => slow-work-debugfs.c} (97%) diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt index 52bc31433723..9dbf4470c7e1 100644 --- a/Documentation/slow-work.txt +++ b/Documentation/slow-work.txt @@ -279,9 +279,9 @@ The slow-work thread pool has a number of configurables: VIEWING EXECUTING AND QUEUED ITEMS ================================== -If CONFIG_SLOW_WORK_PROC is enabled, a proc file is made available: +If CONFIG_SLOW_WORK_DEBUG is enabled, a debugfs file is made available: - /proc/slow_work_rq + /sys/kernel/debug/slow_work/runqueue through which the list of work items being executed and the queues of items to be executed may be viewed. The owner of a work item is given the chance to diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index 5035a2691739..13337bf6c3f5 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -20,7 +20,7 @@ #include struct slow_work; -#ifdef CONFIG_SLOW_WORK_PROC +#ifdef CONFIG_SLOW_WORK_DEBUG struct seq_file; #endif @@ -42,8 +42,8 @@ struct slow_work_ops { /* execute a work item */ void (*execute)(struct slow_work *work); -#ifdef CONFIG_SLOW_WORK_PROC - /* describe a work item for /proc */ +#ifdef CONFIG_SLOW_WORK_DEBUG + /* describe a work item for debugfs */ void (*desc)(struct slow_work *work, struct seq_file *m); #endif }; @@ -64,7 +64,7 @@ struct slow_work { #define SLOW_WORK_DELAYED 5 /* item is struct delayed_slow_work with active timer */ const struct slow_work_ops *ops; /* operations table for this item */ struct list_head link; /* link in queue */ -#ifdef CONFIG_SLOW_WORK_PROC +#ifdef CONFIG_SLOW_WORK_DEBUG struct timespec mark; /* jiffies at which queued or exec begun */ #endif }; diff --git a/init/Kconfig b/init/Kconfig index ab5c64801fe5..39923ccc287b 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -1098,12 +1098,12 @@ config SLOW_WORK See Documentation/slow-work.txt. -config SLOW_WORK_PROC - bool "Slow work debugging through /proc" +config SLOW_WORK_DEBUG + bool "Slow work debugging through debugfs" default n - depends on SLOW_WORK && PROC_FS + depends on SLOW_WORK && DEBUG_FS help - Display the contents of the slow work run queue through /proc, + Display the contents of the slow work run queue through debugfs, including items currently executing. See Documentation/slow-work.txt. diff --git a/kernel/Makefile b/kernel/Makefile index 776ffed1556d..d7c13d249b2d 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -94,7 +94,7 @@ obj-$(CONFIG_X86_DS) += trace/ obj-$(CONFIG_RING_BUFFER) += trace/ obj-$(CONFIG_SMP) += sched_cpupri.o obj-$(CONFIG_SLOW_WORK) += slow-work.o -obj-$(CONFIG_SLOW_WORK_PROC) += slow-work-proc.o +obj-$(CONFIG_SLOW_WORK_DEBUG) += slow-work-debugfs.o obj-$(CONFIG_PERF_EVENTS) += perf_event.o ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y) diff --git a/kernel/slow-work-proc.c b/kernel/slow-work-debugfs.c similarity index 97% rename from kernel/slow-work-proc.c rename to kernel/slow-work-debugfs.c index 3988032571f5..e45c43645298 100644 --- a/kernel/slow-work-proc.c +++ b/kernel/slow-work-debugfs.c @@ -57,7 +57,7 @@ static void slow_work_print_mark(struct seq_file *m, struct slow_work *work) } /* - * Describe a slow work item for /proc + * Describe a slow work item for debugfs */ static int slow_work_runqueue_show(struct seq_file *m, void *v) { @@ -211,7 +211,7 @@ static const struct seq_operations slow_work_runqueue_ops = { }; /* - * open "/proc/slow_work_rq" to list queue contents + * open "/sys/kernel/debug/slow_work/runqueue" to list queue contents */ static int slow_work_runqueue_open(struct inode *inode, struct file *file) { diff --git a/kernel/slow-work.c b/kernel/slow-work.c index b5c17f15f9de..00889bd3c590 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include "slow-work.h" static void slow_work_cull_timeout(unsigned long); @@ -138,7 +138,7 @@ static void slow_work_clear_thread_processing(int id) {} /* * Data for tracking currently executing items for indication through /proc */ -#ifdef CONFIG_SLOW_WORK_PROC +#ifdef CONFIG_SLOW_WORK_DEBUG struct slow_work *slow_work_execs[SLOW_WORK_THREAD_LIMIT]; pid_t slow_work_pids[SLOW_WORK_THREAD_LIMIT]; DEFINE_RWLOCK(slow_work_execs_lock); @@ -823,7 +823,7 @@ static void slow_work_new_thread_execute(struct slow_work *work) static const struct slow_work_ops slow_work_new_thread_ops = { .owner = THIS_MODULE, .execute = slow_work_new_thread_execute, -#ifdef CONFIG_SLOW_WORK_PROC +#ifdef CONFIG_SLOW_WORK_DEBUG .desc = slow_work_new_thread_desc, #endif }; @@ -1055,9 +1055,15 @@ static int __init init_slow_work(void) if (slow_work_max_max_threads < nr_cpus * 2) slow_work_max_max_threads = nr_cpus * 2; #endif -#ifdef CONFIG_SLOW_WORK_PROC - proc_create("slow_work_rq", S_IFREG | 0400, NULL, - &slow_work_runqueue_fops); +#ifdef CONFIG_SLOW_WORK_DEBUG + { + struct dentry *dbdir; + + dbdir = debugfs_create_dir("slow_work", NULL); + if (dbdir && !IS_ERR(dbdir)) + debugfs_create_file("runqueue", S_IFREG | 0400, dbdir, + NULL, &slow_work_runqueue_fops); + } #endif return 0; } diff --git a/kernel/slow-work.h b/kernel/slow-work.h index 3c2f007f3ad6..321f3c59d732 100644 --- a/kernel/slow-work.h +++ b/kernel/slow-work.h @@ -19,7 +19,7 @@ /* * slow-work.c */ -#ifdef CONFIG_SLOW_WORK_PROC +#ifdef CONFIG_SLOW_WORK_DEBUG extern struct slow_work *slow_work_execs[]; extern pid_t slow_work_pids[]; extern rwlock_t slow_work_execs_lock; @@ -30,9 +30,9 @@ extern struct list_head vslow_work_queue; extern spinlock_t slow_work_queue_lock; /* - * slow-work-proc.c + * slow-work-debugfs.c */ -#ifdef CONFIG_SLOW_WORK_PROC +#ifdef CONFIG_SLOW_WORK_DEBUG extern const struct file_operations slow_work_runqueue_fops; extern void slow_work_new_thread_desc(struct slow_work *, struct seq_file *); From 2b5e63f6b8f6566161a261a9face1de433d6608e Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Thu, 19 Nov 2009 16:40:09 +0000 Subject: [PATCH 715/743] MIPS: IP22/IP28 Disable early printk to fix boot problems on some systems. Some Debian users have reported that the kernel hangs early during boot on some IP22 systems. Thomas Bogendoerfer found that this is due to a "bad interaction between CONFIG_EARLY_PRINTK and overwritten prom memory during early boot". Since there's no fix yet, disable CONFIG_EARLY_PRINTK for now. Signed-off-by: Martin Michlmayr Cc: linux-mips@linux-mips.org Cc: Thomas Bogendoerfer Cc: Dmitri Vorobiev Patchwork: http://patchwork.linux-mips.org/patch/702/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 1aad0d9f5074..ffdd651c54b1 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -358,7 +358,14 @@ config SGI_IP22 select SWAP_IO_SPACE select SYS_HAS_CPU_R4X00 select SYS_HAS_CPU_R5000 - select SYS_HAS_EARLY_PRINTK + # + # Disable EARLY_PRINTK for now since it leads to overwritten prom + # memory during early boot on some machines. + # + # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com + # for a more details discussion + # + # select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN @@ -410,7 +417,14 @@ config SGI_IP28 select SGI_HAS_ZILOG select SWAP_IO_SPACE select SYS_HAS_CPU_R10000 - select SYS_HAS_EARLY_PRINTK + # + # Disable EARLY_PRINTK for now since it leads to overwritten prom + # memory during early boot on some machines. + # + # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com + # for a more details discussion + # + # select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN help From c677189af9faa3f26fae0fcb7ac59f477048b89a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 24 Nov 2009 13:16:02 +0000 Subject: [PATCH 716/743] MIPS: Fix build error if __xchg() is not getting inlined. If __xchg() is not getting inlined the outline version of the function will have a reference to __xchg_called_with_bad_pointer() which does not exist remaining. Fixed by using BUILD_BUG_ON() to check for allowable operand sizes. Signed-off-by: Ralf Baechle Patchwork: http://patchwork.linux-mips.org/patch/705/ --- arch/mips/include/asm/system.h | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h index fcf5f98d90cc..83b5509e09e8 100644 --- a/arch/mips/include/asm/system.h +++ b/arch/mips/include/asm/system.h @@ -12,6 +12,7 @@ #ifndef _ASM_SYSTEM_H #define _ASM_SYSTEM_H +#include #include #include @@ -193,10 +194,6 @@ extern __u64 __xchg_u64_unsupported_on_32bit_kernels(volatile __u64 * m, __u64 v #define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels #endif -/* This function doesn't exist, so you'll get a linker error - if something tries to do an invalid xchg(). */ -extern void __xchg_called_with_bad_pointer(void); - static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) { switch (size) { @@ -205,11 +202,17 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz case 8: return __xchg_u64(ptr, x); } - __xchg_called_with_bad_pointer(); + return x; } -#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) +#define xchg(ptr, x) \ +({ \ + BUILD_BUG_ON(sizeof(*(ptr)) & ~0xc); \ + \ + ((__typeof__(*(ptr))) \ + __xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))); \ +}) extern void set_handler(unsigned long offset, void *addr, unsigned long len); extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len); From e1eb3a983befdb422e1aae299bdab573d04929f6 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 26 Nov 2009 18:28:42 +0000 Subject: [PATCH 717/743] MIPS: Add missing definition for MADV_HWPOISON. Thanks to Joseph S. Myers for reporting this. Signed-off-by: Ralf Baechle Cc: "Joseph S. Myers" Patchwork: http://patchwork.linux-mips.org/patch/723/ --- arch/mips/include/asm/mman.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/include/asm/mman.h b/arch/mips/include/asm/mman.h index a2250f390a29..c892bfb3e2c1 100644 --- a/arch/mips/include/asm/mman.h +++ b/arch/mips/include/asm/mman.h @@ -75,6 +75,7 @@ #define MADV_MERGEABLE 12 /* KSM may merge identical pages */ #define MADV_UNMERGEABLE 13 /* KSM may not merge identical pages */ +#define MADV_HWPOISON 100 /* poison a page for testing */ /* compatibility flags */ #define MAP_FILE 0 From 315fe625f878749a7d2b6b65a40c29bbbe6e1dc7 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 1 Dec 2009 14:55:25 +0800 Subject: [PATCH 718/743] MIPS: Loongson: Disallow 4kB pages Currently, with PAGE_SIZE_4KB, the kernel for loongson will hang on: Kernel panic - not syncing: Attempted to kill init! The possible reason is the cache aliases problem: Loongson 2F has 64kb, 4 way L1 Cache, the way size is 16kb, which is bigger then 4kb. so, If using 4kb page size, there is cache aliases problem. To avoid this kind of problem, extra cache flushing. The 2nd possible solution is 16kb page size which avoids cache aliases without the need for extra cache flushes. So we disable 4kB pages until the aliasing issue is solved. Signed-off-by: Wu Zhangjin Patchwork: http://patchwork.linux-mips.org/patch/736/ Cc: linux-mips@linux-mips.org Cc: zhangfx@lemote.com Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index ffdd651c54b1..e232e50e6a0a 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1453,6 +1453,7 @@ choice config PAGE_SIZE_4KB bool "4kB" + depends on !CPU_LOONGSON2 help This option select the standard 4kB Linux page size. On some R3000-family processors this is the only available page size. Using From f133f22dd6f413bdf71ebf7e00ce441d98ac7c87 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 1 Dec 2009 14:55:42 +0800 Subject: [PATCH 719/743] MIPS: Loongson: Switch from flatmem to sparsemem With flatmem hibernation for Loongson will fail, and there are also some other problems such as broken files when using NFS or CIFS / Samba. The config help of sparsemem says: "This option provides some potential performance benefits, along with decreased code complexity." So to avoid the potential problems of FLATMEM, we disable FLATMEM directly and use SPARSEMEM instead. Related email thread: http://groups.google.com/group/loongson-dev/browse_thread/thread/b6b65890ec2b0f24/feb43e5aa7f55d9b?show_docid=feb43e5aa7f55d9b Reported-by: Tatu Kilappa Signed-off-by: Wu Zhangjin Patchwork: http://patchwork.linux-mips.org/patch/737/ Cc: linux-mips@linux-mips.org Cc: zhangfx@lemote.com Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e232e50e6a0a..fd7620f025fa 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1778,7 +1778,7 @@ config SYS_SUPPORTS_SMARTMIPS config ARCH_FLATMEM_ENABLE def_bool y - depends on !NUMA + depends on !NUMA && !CPU_LOONGSON2 config ARCH_DISCONTIGMEM_ENABLE bool From 4c4cb1b1605e50983afd7924980c9434b214599f Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 1 Dec 2009 13:17:41 -0800 Subject: [PATCH 720/743] drivers/media/dvb/dvb-core/dvb_frontend.c: needs semaphore.h Fixes: v4l/dvb_frontend.c: In function 'dvb_frontend_stop': v4l/dvb_frontend.c:707: error: implicit declaration of function 'init_MUTEX' Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14609 Reported-by: Cc: Mauro Carvalho Chehab Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/media/dvb/dvb-core/dvb_frontend.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index ddf639ed2fd8..98082416aa52 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include From fa00e106eb6f082654d822a0946c0c86297ede2c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 1 Dec 2009 13:17:41 -0800 Subject: [PATCH 721/743] drivers/rtc/rtc-pcf50633.c: fix use after free in pcf50633_rtc_probe() "rtc" is freed and then dereferenced on the next line. This patch fixes that. Signed-off-by: Dan Carpenter Acked-by: Alessandro Zummo Cc: David Brownell Cc: Paul Gortmaker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-pcf50633.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c index 33a10c47260e..4c5d5d0c4cfc 100644 --- a/drivers/rtc/rtc-pcf50633.c +++ b/drivers/rtc/rtc-pcf50633.c @@ -292,8 +292,9 @@ static int __devinit pcf50633_rtc_probe(struct platform_device *pdev) &pcf50633_rtc_ops, THIS_MODULE); if (IS_ERR(rtc->rtc_dev)) { + int ret = PTR_ERR(rtc->rtc_dev); kfree(rtc); - return PTR_ERR(rtc->rtc_dev); + return ret; } pcf50633_register_irq(rtc->pcf, PCF50633_IRQ_ALARM, From 3510b8f7f53bf0ded13888724734bba87d22ecc3 Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Tue, 1 Dec 2009 13:17:43 -0800 Subject: [PATCH 722/743] davinci: fb: fix frame buffer driver issues Following issues have been addressed on DA8XX/OMAP-L1XX: a. Screen misalignment during booting when frame buffer console is enabled. b. Driver was configured always in PSEUDOCOLOR mode. This patch dynamically configures the driver either in PSEUDOCOLOUR or TRUECOLOR mode depending on bpp. c. The RED and BLUE offsets were interchanged resulting in wrong bootup logo colour. This patch has been tested on DA830/OMAP-L137 and DA850/OMAP-L138 EVMs. Signed-off-by: Sudhakar Rajashekhara Cc: Steve Chen Cc: Pavel Kiryukhin Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/da8xx-fb.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index 035d56835b75..ea1fd3f47511 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -554,11 +554,11 @@ static int fb_check_var(struct fb_var_screeninfo *var, var->transp.length = 0; break; case 16: /* RGB 565 */ - var->red.offset = 0; + var->red.offset = 11; var->red.length = 5; var->green.offset = 5; var->green.length = 6; - var->blue.offset = 11; + var->blue.offset = 0; var->blue.length = 5; var->transp.offset = 0; var->transp.length = 0; @@ -591,7 +591,7 @@ static int __devexit fb_remove(struct platform_device *dev) unregister_framebuffer(info); fb_dealloc_cmap(&info->cmap); dma_free_coherent(NULL, par->databuf_sz + PAGE_SIZE, - info->screen_base, + info->screen_base - PAGE_SIZE, info->fix.smem_start); free_irq(par->irq, par); clk_disable(par->lcdc_clk); @@ -749,6 +749,7 @@ static int __init fb_probe(struct platform_device *device) (PAGE_SIZE - par->palette_sz); /* the rest of the frame buffer is pixel data */ + da8xx_fb_info->screen_base = par->v_palette_base + par->palette_sz; da8xx_fb_fix.smem_start = par->p_palette_base + par->palette_sz; da8xx_fb_fix.smem_len = par->databuf_sz - par->palette_sz; da8xx_fb_fix.line_length = (lcdc_info->width * lcd_cfg->bpp) / 8; @@ -787,6 +788,8 @@ static int __init fb_probe(struct platform_device *device) da8xx_fb_info->var = da8xx_fb_var; da8xx_fb_info->fbops = &da8xx_fb_ops; da8xx_fb_info->pseudo_palette = par->pseudo_palette; + da8xx_fb_info->fix.visual = (da8xx_fb_info->var.bits_per_pixel <= 8) ? + FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0); if (ret) @@ -825,7 +828,7 @@ err_free_irq: err_release_fb_mem: dma_free_coherent(NULL, par->databuf_sz + PAGE_SIZE, - da8xx_fb_info->screen_base, + da8xx_fb_info->screen_base - PAGE_SIZE, da8xx_fb_info->fix.smem_start); err_release_fb: From 974348435c6d7b65fd6d8857b4809b0ff208d323 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Tue, 1 Dec 2009 13:17:44 -0800 Subject: [PATCH 723/743] kbuild: stepping down as maintainer It has been fun but the last year or more it has been a duty and a burden. So I leave it open for others to take over. Signed-off-by: Sam Ravnborg Cc: Anibal Monsalve Salazar Cc: Steven Rostedt Cc: Michal Marek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 16129e67678a..4f96ac81089c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3015,11 +3015,8 @@ S: Maintained F: fs/autofs4/ KERNEL BUILD -M: Sam Ravnborg -T: git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next.git -T: git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes.git L: linux-kbuild@vger.kernel.org -S: Maintained +S: Orphan F: Documentation/kbuild/ F: Makefile F: scripts/Makefile.* From ca0297015d4f117005718e01aa368875abcccbc5 Mon Sep 17 00:00:00 2001 From: Alek Du Date: Tue, 1 Dec 2009 13:17:45 -0800 Subject: [PATCH 724/743] gpio: Langwell GPIO driver bugfixes - Remove wrong and unnecessary unmask operation - Remove extra GEDR reading This fixes the loss of interrupts which occurs when two or more pins are triggered in close succession. Signed-off-by: Alek Du Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/langwell_gpio.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/gpio/langwell_gpio.c b/drivers/gpio/langwell_gpio.c index 5711ce5353c6..4baf3d7d0f8e 100644 --- a/drivers/gpio/langwell_gpio.c +++ b/drivers/gpio/langwell_gpio.c @@ -144,13 +144,6 @@ static int lnw_irq_type(unsigned irq, unsigned type) static void lnw_irq_unmask(unsigned irq) { - struct lnw_gpio *lnw = get_irq_chip_data(irq); - u32 gpio = irq - lnw->irq_base; - u8 reg = gpio / 32; - void __iomem *gedr; - - gedr = (void __iomem *)(&lnw->reg_base->GEDR[reg]); - writel(BIT(gpio % 32), gedr); }; static void lnw_irq_mask(unsigned irq) @@ -183,13 +176,11 @@ static void lnw_irq_handler(unsigned irq, struct irq_desc *desc) gedr_v = readl(gedr); if (!gedr_v) continue; - for (gpio = reg*32; gpio < reg*32+32; gpio++) { - gedr_v = readl(gedr); + for (gpio = reg*32; gpio < reg*32+32; gpio++) if (gedr_v & BIT(gpio % 32)) { pr_debug("pin %d triggered\n", gpio); generic_handle_irq(lnw->irq_base + gpio); } - } /* clear the edge detect status bit */ writel(gedr_v, gedr); } From 0a1f127a0594d62cb23c26732686d0e2b097b264 Mon Sep 17 00:00:00 2001 From: Peter Horton Date: Tue, 1 Dec 2009 13:17:46 -0800 Subject: [PATCH 725/743] aoe: prevent cache aliases Prevent the AoE block driver from creating cache aliases of page cache pages on machines with virtually indexed caches. Building kernels on an AT91SAM9G20 board without this patch fails with segmentation faults after a couple of passes. Signed-off-by: Peter Horton Cc: "Ed L. Cashin" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/aoe/aoecmd.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index 965ece2c7e4d..13bb69d2abb3 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -735,6 +735,21 @@ diskstats(struct gendisk *disk, struct bio *bio, ulong duration, sector_t sector part_stat_unlock(); } +/* + * Ensure we don't create aliases in VI caches + */ +static inline void +killalias(struct bio *bio) +{ + struct bio_vec *bv; + int i; + + if (bio_data_dir(bio) == READ) + __bio_for_each_segment(bv, bio, i, 0) { + flush_dcache_page(bv->bv_page); + } +} + void aoecmd_ata_rsp(struct sk_buff *skb) { @@ -853,8 +868,12 @@ aoecmd_ata_rsp(struct sk_buff *skb) if (buf && --buf->nframesout == 0 && buf->resid == 0) { diskstats(d->gd, buf->bio, jiffies - buf->stime, buf->sector); - n = (buf->flags & BUFFL_FAIL) ? -EIO : 0; - bio_endio(buf->bio, n); + if (buf->flags & BUFFL_FAIL) + bio_endio(buf->bio, -EIO); + else { + killalias(buf->bio); + bio_endio(buf->bio, 0); + } mempool_free(buf, d->bufpool); } From 48a7f7746875425797aea31ed2910088635c1c7a Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Tue, 1 Dec 2009 13:17:48 -0800 Subject: [PATCH 726/743] rtc-x1205: fix rtc_time to y2k register value conversion The possible CCR_Y2K register values are 19 or 20 and struct rtc_time's tm_year is in years since 1900. The function translating rtc_time to register values assumes tm_year to be years since first christmas, though, and we end up storing 0 or 1 in the CCR_Y2K register, which the hardware does not refuse to do. A subsequent probing of the clock fails due to the invalid value range in the register, though. [ And if it didn't, reading the clock would yield a bogus year because the function translating registers to tm_year is assuming a register value of 19 or 20. ] This fixes the conversion from years since 1900 in tm_year to the corresponding CCR_Y2K value of 19 or 20. Signed-off-by: Johannes Weiner Cc: Alessandro Zummo Cc: Paul Gortmaker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-x1205.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c index 310c10795e9a..cc9ba47b2154 100644 --- a/drivers/rtc/rtc-x1205.c +++ b/drivers/rtc/rtc-x1205.c @@ -195,7 +195,7 @@ static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, /* year, since the rtc epoch*/ buf[CCR_YEAR] = bin2bcd(tm->tm_year % 100); buf[CCR_WDAY] = tm->tm_wday & 0x07; - buf[CCR_Y2K] = bin2bcd(tm->tm_year / 100); + buf[CCR_Y2K] = bin2bcd((tm->tm_year + 1900) / 100); } /* If writing alarm registers, set compare bits on registers 0-4 */ From cb8799eeddd542abd504c62c11014dfbaec7f3a1 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Tue, 1 Dec 2009 13:17:49 -0800 Subject: [PATCH 727/743] rtc-x1205: reset clock to sane state after power failure When detecting power failure, the probe function would reset the clock time to defined state. However, the clock's _date_ might still be bogus and a subsequent probe fails when sanity-checking these values. Change the power-failure fixup code to do a full setting of rtc_time, including a valid date. Signed-off-by: Johannes Weiner Cc: Alessandro Zummo Cc: Paul Gortmaker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-x1205.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c index cc9ba47b2154..6583c1a8b070 100644 --- a/drivers/rtc/rtc-x1205.c +++ b/drivers/rtc/rtc-x1205.c @@ -280,9 +280,9 @@ static int x1205_fix_osc(struct i2c_client *client) int err; struct rtc_time tm; - tm.tm_hour = tm.tm_min = tm.tm_sec = 0; + memset(&tm, 0, sizeof(tm)); - err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE, 0); + err = x1205_set_datetime(client, &tm, 1, X1205_CCR_BASE, 0); if (err < 0) dev_err(&client->dev, "unable to restart the oscillator\n"); From e9438e3193a0d1430b70fafe46855c1a56202f7c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 1 Dec 2009 13:17:50 -0800 Subject: [PATCH 728/743] sysfs: fix SYSFS_DEPRECATED_V2 prompt The SYSFS_DEPRECATED_V2 says "remove" older, deprecated features, but it actually enables them, so correct this confusing, backwards text. Signed-off-by: Randy Dunlap Cc: Kay Sievers Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- init/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/init/Kconfig b/init/Kconfig index 39923ccc287b..eb4b33725db1 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -606,7 +606,7 @@ config SYSFS_DEPRECATED bool config SYSFS_DEPRECATED_V2 - bool "remove sysfs features which may confuse old userspace tools" + bool "enable deprecated sysfs features which may confuse old userspace tools" depends on SYSFS default n select SYSFS_DEPRECATED From be088b139f5244b23ee931afb195eee236b7ff33 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 24 Nov 2009 21:06:26 -0500 Subject: [PATCH 729/743] [WATCHDOG] rc32434_wdt.c: use resource_size() The size value passed to ioremap_nocache() is not correct. Use resource_size() to get the correct value. Signed-off-by: H Hartley Sweeten Cc: Phil Sutter Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/rc32434_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c index f6cccc9df022..3764af11065c 100644 --- a/drivers/watchdog/rc32434_wdt.c +++ b/drivers/watchdog/rc32434_wdt.c @@ -276,7 +276,7 @@ static int __devinit rc32434_wdt_probe(struct platform_device *pdev) return -ENODEV; } - wdt_reg = ioremap_nocache(r->start, r->end - r->start); + wdt_reg = ioremap_nocache(r->start, resource_size(r)); if (!wdt_reg) { printk(KERN_ERR PFX "failed to remap I/O resources\n"); return -ENXIO; From 810a90ae4d2a9f6d9ff80424accbd6f91947e981 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 2 Dec 2009 13:21:23 +0100 Subject: [PATCH 730/743] [PATCH] rc32434_wdt: fix compilation failure This patch fixes the compilation failure of rc32434 due to a bad module parameter description. Signed-off-by: Florian Fainelli Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/rc32434_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c index 3764af11065c..bf12d06b5877 100644 --- a/drivers/watchdog/rc32434_wdt.c +++ b/drivers/watchdog/rc32434_wdt.c @@ -62,7 +62,7 @@ extern unsigned int idt_cpu_freq; static int timeout = WATCHDOG_TIMEOUT; module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "Watchdog timeout value, in seconds (default=" - WATCHDOG_TIMEOUT ")"); + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); From 5d6b1edf8ccc4b7e4e77dff3fc80882833d6186e Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Tue, 1 Dec 2009 18:17:18 +0100 Subject: [PATCH 731/743] [ARM] pxamci: call mmc_remove_host() before freeing resources mmc_remove_host() will cause the mmc core to switch off the bus power by eventually calling pxamci_set_ios(). This function uses the regulator or the GPIO which have been freed already. This causes the following Oops on module unload. [ 49.519649] Unable to handle kernel paging request at virtual address 30303a70 [ 49.526878] pgd = c7084000 [ 49.529563] [30303a70] *pgd=00000000 [ 49.533136] Internal error: Oops: 5 [#1] [ 49.537025] last sysfs file: /sys/devices/platform/pxa27x-ohci/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/scsi_level [ 49.547471] Modules linked in: pxamci(-) eeti_ts [ 49.552061] CPU: 0 Not tainted (2.6.32-rc8 #322) [ 49.557001] PC is at regulator_is_enabled+0x3c/0xbc [ 49.561846] LR is at regulator_is_enabled+0x30/0xbc [ 49.566691] pc : [] lr : [] psr: 60000013 [ 49.566702] sp : c7083e70 ip : 30303a30 fp : 00000000 [ 49.578093] r10: c705e200 r9 : c7082000 r8 : c705e2e0 [ 49.583280] r7 : c7061340 r6 : c7061340 r5 : c7083e70 r4 : 00000000 [ 49.589759] r3 : c04dc434 r2 : c04dc434 r1 : c03eecea r0 : 00000047 [ 49.596241] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 49.603329] Control: 0000397f Table: a7084018 DAC: 00000015 [ 49.609031] Process rmmod (pid: 1101, stack limit = 0xc7082278) [ 49.614908] Stack: (0xc7083e70 to 0xc7084000) [ 49.619238] 3e60: c7082000 c703c4f8 c705ea00 c04f4074 [ 49.627366] 3e80: 00000000 c705e3a0 ffffffff c0247ddc c70361a0 00000000 c705e3a0 ffffffff [ 49.635499] 3ea0: c705e200 bf006400 c78c4f00 c705e200 c705e3a0 ffffffff c705e200 ffffffff [ 49.643633] 3ec0: c04d8ac8 c02476d0 ffffffff c0247c60 c705e200 c0248678 c705e200 c0249064 [ 49.651765] 3ee0: ffffffff bf006204 c04d8ad0 c04d8ad0 c04d8ac8 bf007490 00000880 c00440c4 [ 49.659898] 3f00: 0000b748 c01c5708 bf007490 c01c44c8 c04d8ac8 c04d8afc bf007490 c01c4570 [ 49.668031] 3f20: bf007490 bf00750c c04f4258 c01c37a4 00000000 bf00750c c7083f44 c007b014 [ 49.676162] 3f40: 4000d000 6d617870 08006963 00000001 00000000 c7085000 00000001 00000000 [ 49.684287] 3f60: 4000d000 c7083f8c 00000001 bea01a54 00005401 c7ab1400 c00440c4 00082000 [ 49.692420] 3f80: bf00750c 00000880 c7083f8c 00000000 4000cfa8 00000000 00000880 bea01cc8 [ 49.700552] 3fa0: 00000081 c0043f40 00000000 00000880 bea01cc8 00000880 00000006 00000000 [ 49.708677] 3fc0: 00000000 00000880 bea01cc8 00000081 00000097 0000cca4 0000b748 00000000 [ 49.716802] 3fe0: 4001a4f0 bea01cc0 00018bf4 4001a4fc 20000010 bea01cc8 a063e021 a063e421 [ 49.724958] [] (regulator_is_enabled+0x3c/0xbc) from [] (mmc_regulator_set_ocr+0x14/0xd8) [ 49.734836] [] (mmc_regulator_set_ocr+0x14/0xd8) from [] (pxamci_set_ios+0xd8/0x17c [pxamci]) [ 49.745044] [] (pxamci_set_ios+0xd8/0x17c [pxamci]) from [] (mmc_power_off+0x50/0x58) [ 49.754555] [] (mmc_power_off+0x50/0x58) from [] (mmc_detach_bus+0x68/0xc4) [ 49.763207] [] (mmc_detach_bus+0x68/0xc4) from [] (mmc_stop_host+0xd4/0x1bc) [ 49.771944] [] (mmc_stop_host+0xd4/0x1bc) from [] (mmc_remove_host+0xc/0x20) [ 49.780681] [] (mmc_remove_host+0xc/0x20) from [] (pxamci_remove+0xc8/0x174 [pxamci]) [ 49.790211] [] (pxamci_remove+0xc8/0x174 [pxamci]) from [] (platform_drv_remove+0x1c/0x24) [ 49.800164] [] (platform_drv_remove+0x1c/0x24) from [] (__device_release_driver+0x7c/0xc4) [ 49.810110] [] (__device_release_driver+0x7c/0xc4) from [] (driver_detach+0x60/0x8c) [ 49.819535] [] (driver_detach+0x60/0x8c) from [] (bus_remove_driver+0x90/0xcc) [ 49.828452] [] (bus_remove_driver+0x90/0xcc) from [] (sys_delete_module+0x1d8/0x254) [ 49.837891] [] (sys_delete_module+0x1d8/0x254) from [] (ret_fast_syscall+0x0/0x28) [ 49.847145] Code: eb06c53a e596c030 e1a0500d e59f106c (e59c0040) [ 49.853566] ---[ end trace b5fa66a00cea142f ]--- Signed-off-by: Daniel Mack Reported-by: Sven Neumann Cc: Pierre Ossman Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: stable@kernel.org Signed-off-by: Eric Miao --- drivers/mmc/host/pxamci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index b00d67319058..9fb480bb0e0a 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -760,6 +760,8 @@ static int pxamci_remove(struct platform_device *pdev) if (mmc) { struct pxamci_host *host = mmc_priv(mmc); + mmc_remove_host(mmc); + if (host->pdata) { gpio_cd = host->pdata->gpio_card_detect; gpio_ro = host->pdata->gpio_card_ro; @@ -779,8 +781,6 @@ static int pxamci_remove(struct platform_device *pdev) if (host->pdata && host->pdata->exit) host->pdata->exit(&pdev->dev, mmc); - mmc_remove_host(mmc); - pxamci_stop_clock(host); writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD| END_CMD_RES|PRG_DONE|DATA_TRAN_DONE, From a91be9ee69b09cdaa02afd5d7056bc2e6d382cfe Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 2 Dec 2009 11:33:03 +0000 Subject: [PATCH 732/743] MIPS: Fix MIPS I build. Broken by d63c63e889bbeeaa461a8addf1245f89f3ce4ece (lmo) rsp. f1e39a4a616cd9981a9decfd5332fd07a01abb8b (kernel.org). Signed-off-by: Ralf Baechle Patchwork: http://patchwork.linux-mips.org/patch/746/ --- arch/mips/kernel/syscall.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 3fe1fcfa2e73..fe0d79805603 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -306,6 +306,7 @@ static inline int mips_atomic_set(struct pt_regs *regs, if (cpu_has_llsc && R10000_LLSC_WAR) { __asm__ __volatile__ ( + " .set mips3 \n" " li %[err], 0 \n" "1: ll %[old], (%[addr]) \n" " move %[tmp], %[new] \n" @@ -320,6 +321,7 @@ static inline int mips_atomic_set(struct pt_regs *regs, " "STR(PTR)" 1b, 4b \n" " "STR(PTR)" 2b, 4b \n" " .previous \n" + " .set mips0 \n" : [old] "=&r" (old), [err] "=&r" (err), [tmp] "=&r" (tmp) @@ -329,6 +331,7 @@ static inline int mips_atomic_set(struct pt_regs *regs, : "memory"); } else if (cpu_has_llsc) { __asm__ __volatile__ ( + " .set mips3 \n" " li %[err], 0 \n" "1: ll %[old], (%[addr]) \n" " move %[tmp], %[new] \n" @@ -347,6 +350,7 @@ static inline int mips_atomic_set(struct pt_regs *regs, " "STR(PTR)" 1b, 5b \n" " "STR(PTR)" 2b, 5b \n" " .previous \n" + " .set mips0 \n" : [old] "=&r" (old), [err] "=&r" (err), [tmp] "=&r" (tmp) From 4e7c81af3fa076e2d1534cc665ea2f623e631f5d Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 2 Dec 2009 13:07:01 +0100 Subject: [PATCH 733/743] MIPS: RB532: Fix devices.c compilation. We should now use dev_set_drvdata to set the driver driver_data field. Signed-off-by: Florian Fainelli Patchwork: http://patchwork.linux-mips.org/patch/747/ Signed-off-by: Ralf Baechle --- arch/mips/rb532/devices.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index 9f40e1ff9b4f..041fc1afc3f4 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -110,7 +110,6 @@ static struct korina_device korina_dev0_data = { static struct platform_device korina_dev0 = { .id = -1, .name = "korina", - .dev.driver_data = &korina_dev0_data, .resource = korina_dev0_res, .num_resources = ARRAY_SIZE(korina_dev0_res), }; @@ -332,6 +331,8 @@ static int __init plat_setup_devices(void) /* set the uart clock to the current cpu frequency */ rb532_uart_res[0].uartclk = idt_cpu_freq; + dev_set_drvdata(&korina_dev0.dev, &korina_dev0_data); + return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs)); } From e8092da92e1fd38dc7c38a4eeae93eaa21764584 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 30 Nov 2009 14:01:56 +0000 Subject: [PATCH 734/743] regulator: Initialise wm831x structure pointor for ISINK driver The version that made it into mainline missed the initialisation of the chip handle. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/wm831x-isink.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/regulator/wm831x-isink.c b/drivers/regulator/wm831x-isink.c index 1d8d9879d3a1..48857008758c 100644 --- a/drivers/regulator/wm831x-isink.c +++ b/drivers/regulator/wm831x-isink.c @@ -167,6 +167,8 @@ static __devinit int wm831x_isink_probe(struct platform_device *pdev) return -ENOMEM; } + isink->wm831x = wm831x; + res = platform_get_resource(pdev, IORESOURCE_IO, 0); if (res == NULL) { dev_err(&pdev->dev, "No I/O resource\n"); From 35dead4235e2b67da7275b4122fed37099c2f462 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 3 Dec 2009 00:29:15 +0100 Subject: [PATCH 735/743] modules: don't export section names of empty sections via sysfs On the parisc architecture we face for each and every loaded kernel module this kernel "badness warning": sysfs: cannot create duplicate filename '/module/ac97_bus/sections/.text' Badness at fs/sysfs/dir.c:487 Reason for that is, that on parisc all kernel modules do have multiple .text sections due to the usage of the -ffunction-sections compiler flag which is needed to reach all jump targets on this platform. An objdump on such a kernel module gives: Sections: Idx Name Size VMA LMA File off Algn 0 .note.gnu.build-id 00000024 00000000 00000000 00000034 2**2 CONTENTS, ALLOC, LOAD, READONLY, DATA 1 .text 00000000 00000000 00000000 00000058 2**0 CONTENTS, ALLOC, LOAD, READONLY, CODE 2 .text.ac97_bus_match 0000001c 00000000 00000000 00000058 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE 3 .text 00000000 00000000 00000000 000000d4 2**0 CONTENTS, ALLOC, LOAD, READONLY, CODE ... Since the .text sections are empty (size of 0 bytes) and won't be loaded by the kernel module loader anyway, I don't see a reason why such sections need to be listed under /sys/module//sections/ either. The attached patch does solve this issue by not exporting section names which are empty. This fixes bugzilla http://bugzilla.kernel.org/show_bug.cgi?id=14703 Signed-off-by: Helge Deller CC: rusty@rustcorp.com.au CC: akpm@linux-foundation.org CC: James.Bottomley@HansenPartnership.com CC: roland@redhat.com CC: dave@hiauly1.hia.nrc.ca Signed-off-by: Linus Torvalds --- kernel/module.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/module.c b/kernel/module.c index 8b7d8805819d..5842a71cf052 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1187,7 +1187,8 @@ static void add_sect_attrs(struct module *mod, unsigned int nsect, /* Count loaded sections and allocate structures */ for (i = 0; i < nsect; i++) - if (sechdrs[i].sh_flags & SHF_ALLOC) + if (sechdrs[i].sh_flags & SHF_ALLOC + && sechdrs[i].sh_size) nloaded++; size[0] = ALIGN(sizeof(*sect_attrs) + nloaded * sizeof(sect_attrs->attrs[0]), @@ -1207,6 +1208,8 @@ static void add_sect_attrs(struct module *mod, unsigned int nsect, for (i = 0; i < nsect; i++) { if (! (sechdrs[i].sh_flags & SHF_ALLOC)) continue; + if (!sechdrs[i].sh_size) + continue; sattr->address = sechdrs[i].sh_addr; sattr->name = kstrdup(secstrings + sechdrs[i].sh_name, GFP_KERNEL); From f066a4f6df68f03b565dfe867dde54dfeb26576e Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 1 Dec 2009 14:56:44 +1030 Subject: [PATCH 736/743] param: don't complain about unused module parameters. Jon confirms that recent modprobe will look in /proc/cmdline, so these cmdline options can still be used. See http://bugzilla.kernel.org/show_bug.cgi?id=14164 Reported-by: Adam Williamson Cc: stable@kernel.org Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds --- init/main.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/init/main.c b/init/main.c index 5988debfc505..4051d75dd2d6 100644 --- a/init/main.c +++ b/init/main.c @@ -251,7 +251,7 @@ early_param("loglevel", loglevel); /* * Unknown boot options get handed to init, unless they look like - * failed parameters + * unused parameters (modprobe will find them in /proc/cmdline). */ static int __init unknown_bootoption(char *param, char *val) { @@ -272,14 +272,9 @@ static int __init unknown_bootoption(char *param, char *val) if (obsolete_checksetup(param)) return 0; - /* - * Preemptive maintenance for "why didn't my misspelled command - * line work?" - */ - if (strchr(param, '.') && (!val || strchr(param, '.') < val)) { - printk(KERN_ERR "Unknown boot option `%s': ignoring\n", param); + /* Unused module parameter. */ + if (strchr(param, '.') && (!val || strchr(param, '.') < val)) return 0; - } if (panic_later) return 0; From 049e2d13b8e8a6d8be43e675a5ed9d4613819f65 Mon Sep 17 00:00:00 2001 From: Anisse Astier Date: Tue, 1 Dec 2009 01:14:25 -0800 Subject: [PATCH 737/743] Input: i8042 - add Dell Vostro 1320, 1520 and 1720 to the reset list These laptops often leave i8042 in a wierd state resulting in non- operational touchpad and keyboard. Signed-off-by: Anisse Astier Signed-off-by: Dmitry Torokhov Signed-off-by: Linus Torvalds --- drivers/input/serio/i8042-x86ia64io.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index a537925f7651..2bcf1ace27c0 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -447,6 +447,27 @@ static struct dmi_system_id __initdata i8042_dmi_reset_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "N10"), }, }, + { + .ident = "Dell Vostro 1320", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1320"), + }, + }, + { + .ident = "Dell Vostro 1520", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1520"), + }, + }, + { + .ident = "Dell Vostro 1720", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1720"), + }, + }, { } }; From dbf763a2f1c117cfe45bbbd2c874a150f0e0900b Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 3 Sep 2009 22:59:01 +0900 Subject: [PATCH 738/743] SPI: spi_txx9: Fix bit rate calculation TXx9 SPI bit rate is calculated by: fBR = (spi-baseclk) / (n + 1) Fix calculation of min_speed_hz, max_speed_hz and n. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- drivers/spi/spi_txx9.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/spi/spi_txx9.c b/drivers/spi/spi_txx9.c index 96057de133ad..19f75627c3de 100644 --- a/drivers/spi/spi_txx9.c +++ b/drivers/spi/spi_txx9.c @@ -29,6 +29,8 @@ #define SPI_FIFO_SIZE 4 +#define SPI_MAX_DIVIDER 0xff /* Max. value for SPCR1.SER */ +#define SPI_MIN_DIVIDER 1 /* Min. value for SPCR1.SER */ #define TXx9_SPMCR 0x00 #define TXx9_SPCR0 0x04 @@ -193,11 +195,8 @@ static void txx9spi_work_one(struct txx9spi *c, struct spi_message *m) if (prev_speed_hz != speed_hz || prev_bits_per_word != bits_per_word) { - u32 n = (c->baseclk + speed_hz - 1) / speed_hz; - if (n < 1) - n = 1; - else if (n > 0xff) - n = 0xff; + int n = DIV_ROUND_UP(c->baseclk, speed_hz) - 1; + n = clamp(n, SPI_MIN_DIVIDER, SPI_MAX_DIVIDER); /* enter config mode */ txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR); @@ -370,8 +369,8 @@ static int __init txx9spi_probe(struct platform_device *dev) goto exit; } c->baseclk = clk_get_rate(c->clk); - c->min_speed_hz = (c->baseclk + 0xff - 1) / 0xff; - c->max_speed_hz = c->baseclk; + c->min_speed_hz = DIV_ROUND_UP(c->baseclk, SPI_MAX_DIVIDER + 1); + c->max_speed_hz = c->baseclk / (SPI_MIN_DIVIDER + 1); res = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!res) From 0fdd07f77fd9cc6a7d49076793daef06ea5d8f13 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 9 Aug 2009 11:42:32 +0200 Subject: [PATCH 739/743] VIDEO: Correct use of request_region/request_mem_region request_region should be used with release_region, not request_mem_region. Geert Uytterhoeven pointed out that in the case of drivers/video/gbefb.c, the problem is actually the other way around; request_mem_region should be used instead of request_region. The semantic patch that finds/fixes this problem is as follows: (http://coccinelle.lip6.fr/) // @r1@ expression start; @@ request_region(start,...) @b1@ expression r1.start; @@ request_mem_region(start,...) @depends on !b1@ expression r1.start; expression E; @@ - release_mem_region + release_region (start,E) // Signed-off-by: Julia Lawall Signed-off-by: Ralf Baechle --- drivers/video/gbefb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index 1a83709f9611..f67db4268374 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -1147,7 +1147,7 @@ static int __init gbefb_probe(struct platform_device *p_dev) gbefb_setup(options); #endif - if (!request_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) { + if (!request_mem_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) { printk(KERN_ERR "gbefb: couldn't reserve mmio region\n"); ret = -EBUSY; goto out_release_framebuffer; From 22763c5cf3690a681551162c15d34d935308c8d7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 2 Dec 2009 19:51:21 -0800 Subject: [PATCH 740/743] Linux 2.6.32 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index ad8260102f64..f5cdb72ba2ce 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 32 -EXTRAVERSION = -rc8 +EXTRAVERSION = NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* From cd78809f6191485a90ea6c92c2b58900ab5c156f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Dec 2009 13:52:39 -0700 Subject: [PATCH 741/743] ioat3: fix p-disabled q-continuation When continuing a pq calculation the driver needs 3 extra sources. The driver can perform a 3 source calculation with a single descriptor, but needs an extended descriptor to process up to 8 sources in one operation. However, in the p-disabled case only one extra source is needed. When continuing a p-disabled operation there are occasions (i.e. 0 < src_cnt % 8 < 3) where the tail operation does not need an extended descriptor. Properly account for this fact otherwise invalid 'dmacount' values will be written to hardware usually causing the channel to halt with 'invalid descriptor' errors. Cc: Signed-off-by: Dan Williams --- drivers/dma/ioat/dma_v3.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 42f6f10fb0cc..e58ecb29513f 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -650,9 +650,11 @@ __ioat3_prep_pq_lock(struct dma_chan *c, enum sum_check_flags *result, num_descs = ioat2_xferlen_to_descs(ioat, len); /* we need 2x the number of descriptors to cover greater than 3 - * sources + * sources (we need 1 extra source in the q-only continuation + * case and 3 extra sources in the p+q continuation case. */ - if (src_cnt > 3 || flags & DMA_PREP_CONTINUE) { + if (src_cnt + dmaf_p_disabled_continue(flags) > 3 || + (dmaf_continue(flags) && !dmaf_p_disabled_continue(flags))) { with_ext = 1; num_descs *= 2; } else From e02a0e47a3f061c1a53fc4376332a988ec047e8a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Dec 2009 13:55:38 -0700 Subject: [PATCH 742/743] async_tx: expand async raid6 test to cover ioatdma corner case Add explicit 11 and 12 disks cases to exercise the 0 < src_cnt % 8 < 3 corner case in the ioatdma driver. Signed-off-by: Dan Williams --- crypto/async_tx/raid6test.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/crypto/async_tx/raid6test.c b/crypto/async_tx/raid6test.c index 3ec27c7e62ea..f84f6b4301d9 100644 --- a/crypto/async_tx/raid6test.c +++ b/crypto/async_tx/raid6test.c @@ -214,6 +214,13 @@ static int raid6_test(void) err += test(4, &tests); if (NDISKS > 5) err += test(5, &tests); + /* the 11 and 12 disk cases are special for ioatdma (p-disabled + * q-continuation without extended descriptor) + */ + if (NDISKS > 12) { + err += test(11, &tests); + err += test(12, &tests); + } err += test(NDISKS, &tests); pr("\n"); From a6d52d70677e99bdb89b6921c265d0a58c22e597 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 19 Dec 2009 15:36:02 -0700 Subject: [PATCH 743/743] ioat2,3: put channel hardware in known state at init Put the ioat2 and ioat3 state machines in the halted state with all errors cleared. The ioat1 init path is not disturbed for stability, there are no reported ioat1 initiaization issues. Cc: Reported-by: Roland Dreier Tested-by: Roland Dreier Acked-by: Simon Horman Signed-off-by: Dan Williams --- drivers/dma/ioat/dma.c | 2 +- drivers/dma/ioat/dma.h | 18 ++++++++++ drivers/dma/ioat/dma_v2.c | 69 +++++++++++++++++++++++++++--------- drivers/dma/ioat/dma_v2.h | 2 ++ drivers/dma/ioat/dma_v3.c | 54 ++++++++++++++++++++-------- drivers/dma/ioat/registers.h | 1 + 6 files changed, 114 insertions(+), 32 deletions(-) diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c index c524d36d3c2e..dcc4ab78b32b 100644 --- a/drivers/dma/ioat/dma.c +++ b/drivers/dma/ioat/dma.c @@ -1032,7 +1032,7 @@ int __devinit ioat_probe(struct ioatdma_device *device) dma->dev = &pdev->dev; if (!dma->chancnt) { - dev_err(dev, "zero channels detected\n"); + dev_err(dev, "channel enumeration error\n"); goto err_setup_interrupts; } diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index 45edde996480..bbc3e78ef333 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -60,6 +60,7 @@ * @dca: direct cache access context * @intr_quirk: interrupt setup quirk (for ioat_v1 devices) * @enumerate_channels: hw version specific channel enumeration + * @reset_hw: hw version specific channel (re)initialization * @cleanup_tasklet: select between the v2 and v3 cleanup routines * @timer_fn: select between the v2 and v3 timer watchdog routines * @self_test: hardware version specific self test for each supported op type @@ -78,6 +79,7 @@ struct ioatdma_device { struct dca_provider *dca; void (*intr_quirk)(struct ioatdma_device *device); int (*enumerate_channels)(struct ioatdma_device *device); + int (*reset_hw)(struct ioat_chan_common *chan); void (*cleanup_tasklet)(unsigned long data); void (*timer_fn)(unsigned long data); int (*self_test)(struct ioatdma_device *device); @@ -264,6 +266,22 @@ static inline void ioat_suspend(struct ioat_chan_common *chan) writeb(IOAT_CHANCMD_SUSPEND, chan->reg_base + IOAT_CHANCMD_OFFSET(ver)); } +static inline void ioat_reset(struct ioat_chan_common *chan) +{ + u8 ver = chan->device->version; + + writeb(IOAT_CHANCMD_RESET, chan->reg_base + IOAT_CHANCMD_OFFSET(ver)); +} + +static inline bool ioat_reset_pending(struct ioat_chan_common *chan) +{ + u8 ver = chan->device->version; + u8 cmd; + + cmd = readb(chan->reg_base + IOAT_CHANCMD_OFFSET(ver)); + return (cmd & IOAT_CHANCMD_RESET) == IOAT_CHANCMD_RESET; +} + static inline void ioat_set_chainaddr(struct ioat_dma_chan *ioat, u64 addr) { struct ioat_chan_common *chan = &ioat->base; diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c index 8f1f7f05deaa..5f7a500e18d0 100644 --- a/drivers/dma/ioat/dma_v2.c +++ b/drivers/dma/ioat/dma_v2.c @@ -239,20 +239,50 @@ void __ioat2_restart_chan(struct ioat2_dma_chan *ioat) __ioat2_start_null_desc(ioat); } -static void ioat2_restart_channel(struct ioat2_dma_chan *ioat) +int ioat2_quiesce(struct ioat_chan_common *chan, unsigned long tmo) { - struct ioat_chan_common *chan = &ioat->base; - unsigned long phys_complete; + unsigned long end = jiffies + tmo; + int err = 0; u32 status; status = ioat_chansts(chan); if (is_ioat_active(status) || is_ioat_idle(status)) ioat_suspend(chan); while (is_ioat_active(status) || is_ioat_idle(status)) { + if (end && time_after(jiffies, end)) { + err = -ETIMEDOUT; + break; + } status = ioat_chansts(chan); cpu_relax(); } + return err; +} + +int ioat2_reset_sync(struct ioat_chan_common *chan, unsigned long tmo) +{ + unsigned long end = jiffies + tmo; + int err = 0; + + ioat_reset(chan); + while (ioat_reset_pending(chan)) { + if (end && time_after(jiffies, end)) { + err = -ETIMEDOUT; + break; + } + cpu_relax(); + } + + return err; +} + +static void ioat2_restart_channel(struct ioat2_dma_chan *ioat) +{ + struct ioat_chan_common *chan = &ioat->base; + unsigned long phys_complete; + + ioat2_quiesce(chan, 0); if (ioat_cleanup_preamble(chan, &phys_complete)) __cleanup(ioat, phys_complete); @@ -318,6 +348,19 @@ void ioat2_timer_event(unsigned long data) spin_unlock_bh(&chan->cleanup_lock); } +static int ioat2_reset_hw(struct ioat_chan_common *chan) +{ + /* throw away whatever the channel was doing and get it initialized */ + u32 chanerr; + + ioat2_quiesce(chan, msecs_to_jiffies(100)); + + chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); + writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET); + + return ioat2_reset_sync(chan, msecs_to_jiffies(200)); +} + /** * ioat2_enumerate_channels - find and initialize the device's channels * @device: the device to be enumerated @@ -360,6 +403,10 @@ int ioat2_enumerate_channels(struct ioatdma_device *device) (unsigned long) ioat); ioat->xfercap_log = xfercap_log; spin_lock_init(&ioat->ring_lock); + if (device->reset_hw(&ioat->base)) { + i = 0; + break; + } } dma->chancnt = i; return i; @@ -467,7 +514,6 @@ int ioat2_alloc_chan_resources(struct dma_chan *c) struct ioat2_dma_chan *ioat = to_ioat2_chan(c); struct ioat_chan_common *chan = &ioat->base; struct ioat_ring_ent **ring; - u32 chanerr; int order; /* have we already been set up? */ @@ -477,12 +523,6 @@ int ioat2_alloc_chan_resources(struct dma_chan *c) /* Setup register to interrupt and write completion status on error */ writew(IOAT_CHANCTRL_RUN, chan->reg_base + IOAT_CHANCTRL_OFFSET); - chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); - if (chanerr) { - dev_err(to_dev(chan), "CHANERR = %x, clearing\n", chanerr); - writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET); - } - /* allocate a completion writeback area */ /* doing 2 32bit writes to mmio since 1 64b write doesn't work */ chan->completion = pci_pool_alloc(chan->device->completion_pool, @@ -746,13 +786,7 @@ void ioat2_free_chan_resources(struct dma_chan *c) tasklet_disable(&chan->cleanup_task); del_timer_sync(&chan->timer); device->cleanup_tasklet((unsigned long) ioat); - - /* Delay 100ms after reset to allow internal DMA logic to quiesce - * before removing DMA descriptor resources. - */ - writeb(IOAT_CHANCMD_RESET, - chan->reg_base + IOAT_CHANCMD_OFFSET(chan->device->version)); - mdelay(100); + device->reset_hw(chan); spin_lock_bh(&ioat->ring_lock); descs = ioat2_ring_space(ioat); @@ -839,6 +873,7 @@ int __devinit ioat2_dma_probe(struct ioatdma_device *device, int dca) int err; device->enumerate_channels = ioat2_enumerate_channels; + device->reset_hw = ioat2_reset_hw; device->cleanup_tasklet = ioat2_cleanup_tasklet; device->timer_fn = ioat2_timer_event; device->self_test = ioat_dma_self_test; diff --git a/drivers/dma/ioat/dma_v2.h b/drivers/dma/ioat/dma_v2.h index 1d849ef74d5f..3afad8da43cc 100644 --- a/drivers/dma/ioat/dma_v2.h +++ b/drivers/dma/ioat/dma_v2.h @@ -185,6 +185,8 @@ bool reshape_ring(struct ioat2_dma_chan *ioat, int order); void __ioat2_issue_pending(struct ioat2_dma_chan *ioat); void ioat2_cleanup_tasklet(unsigned long data); void ioat2_timer_event(unsigned long data); +int ioat2_quiesce(struct ioat_chan_common *chan, unsigned long tmo); +int ioat2_reset_sync(struct ioat_chan_common *chan, unsigned long tmo); extern struct kobj_type ioat2_ktype; extern struct kmem_cache *ioat2_cache; #endif /* IOATDMA_V2_H */ diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index e58ecb29513f..9908c9e94b2d 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -1130,6 +1130,45 @@ static int __devinit ioat3_dma_self_test(struct ioatdma_device *device) return 0; } +static int ioat3_reset_hw(struct ioat_chan_common *chan) +{ + /* throw away whatever the channel was doing and get it + * initialized, with ioat3 specific workarounds + */ + struct ioatdma_device *device = chan->device; + struct pci_dev *pdev = device->pdev; + u32 chanerr; + u16 dev_id; + int err; + + ioat2_quiesce(chan, msecs_to_jiffies(100)); + + chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); + writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET); + + /* -= IOAT ver.3 workarounds =- */ + /* Write CHANERRMSK_INT with 3E07h to mask out the errors + * that can cause stability issues for IOAT ver.3, and clear any + * pending errors + */ + pci_write_config_dword(pdev, IOAT_PCI_CHANERRMASK_INT_OFFSET, 0x3e07); + err = pci_read_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, &chanerr); + if (err) { + dev_err(&pdev->dev, "channel error register unreachable\n"); + return err; + } + pci_write_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, chanerr); + + /* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit + * (workaround for spurious config parity error after restart) + */ + pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id); + if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0) + pci_write_config_dword(pdev, IOAT_PCI_DMAUNCERRSTS_OFFSET, 0x10); + + return ioat2_reset_sync(chan, msecs_to_jiffies(200)); +} + int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) { struct pci_dev *pdev = device->pdev; @@ -1139,10 +1178,10 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) struct ioat_chan_common *chan; bool is_raid_device = false; int err; - u16 dev_id; u32 cap; device->enumerate_channels = ioat2_enumerate_channels; + device->reset_hw = ioat3_reset_hw; device->self_test = ioat3_dma_self_test; dma = &device->common; dma->device_prep_dma_memcpy = ioat2_dma_prep_memcpy_lock; @@ -1218,19 +1257,6 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) dma->device_prep_dma_xor_val = NULL; #endif - /* -= IOAT ver.3 workarounds =- */ - /* Write CHANERRMSK_INT with 3E07h to mask out the errors - * that can cause stability issues for IOAT ver.3 - */ - pci_write_config_dword(pdev, IOAT_PCI_CHANERRMASK_INT_OFFSET, 0x3e07); - - /* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit - * (workaround for spurious config parity error after restart) - */ - pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id); - if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0) - pci_write_config_dword(pdev, IOAT_PCI_DMAUNCERRSTS_OFFSET, 0x10); - err = ioat_probe(device); if (err) return err; diff --git a/drivers/dma/ioat/registers.h b/drivers/dma/ioat/registers.h index f015ec196700..e8ae63baf588 100644 --- a/drivers/dma/ioat/registers.h +++ b/drivers/dma/ioat/registers.h @@ -27,6 +27,7 @@ #define IOAT_PCI_DEVICE_ID_OFFSET 0x02 #define IOAT_PCI_DMAUNCERRSTS_OFFSET 0x148 +#define IOAT_PCI_CHANERR_INT_OFFSET 0x180 #define IOAT_PCI_CHANERRMASK_INT_OFFSET 0x184 /* MMIO Device Registers */