2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00

iwlwifi: yoyo: add PCI config space region type

Add a new region type that allows us to dump the PCI config space.
This is mostly the same as dumping a memory region, but reading from
the device's config space instead.

In order to make this generic and independent of the trans type, we
make a function called iwl_dump_ini_config_iter() that calls a new op
in the transport to read its config space.

Change-Id: I15151bddf589f13b0e0a45c28b96bbcd73bcfdeb
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This commit is contained in:
Luca Coelho 2019-11-01 15:31:02 +02:00
parent cceb45078a
commit f696a7ee25
3 changed files with 47 additions and 1 deletions

View File

@ -1108,6 +1108,38 @@ static int iwl_dump_ini_csr_iter(struct iwl_fw_runtime *fwrt,
return sizeof(*range) + le32_to_cpu(range->range_data_size);
}
static int iwl_dump_ini_config_iter(struct iwl_fw_runtime *fwrt,
struct iwl_dump_ini_region_data *reg_data,
void *range_ptr, int idx)
{
struct iwl_trans *trans = fwrt->trans;
struct iwl_fw_ini_region_tlv *reg = (void *)reg_data->reg_tlv->data;
struct iwl_fw_ini_error_dump_range *range = range_ptr;
__le32 *val = range->data;
u32 addr = le32_to_cpu(reg->addrs[idx]) +
le32_to_cpu(reg->dev_addr.offset);
int i;
/* we shouldn't get here if the trans doesn't have read_config32 */
if (WARN_ON_ONCE(!trans->ops->read_config32))
return -EOPNOTSUPP;
range->internal_base_addr = cpu_to_le32(addr);
range->range_data_size = reg->dev_addr.size;
for (i = 0; i < le32_to_cpu(reg->dev_addr.size); i += 4) {
int ret;
u32 tmp;
ret = trans->ops->read_config32(trans, addr + i, &tmp);
if (ret < 0)
return ret;
*val++ = cpu_to_le32(tmp);
}
return sizeof(*range) + le32_to_cpu(range->range_data_size);
}
static int iwl_dump_ini_dev_mem_iter(struct iwl_fw_runtime *fwrt,
struct iwl_dump_ini_region_data *reg_data,
void *range_ptr, int idx)
@ -2052,7 +2084,12 @@ static const struct iwl_dump_ini_mem_ops iwl_dump_ini_region_ops[] = {
.fill_range = iwl_dump_ini_csr_iter,
},
[IWL_FW_INI_REGION_DRAM_IMR] = {},
[IWL_FW_INI_REGION_PCI_IOSF_CONFIG] = {},
[IWL_FW_INI_REGION_PCI_IOSF_CONFIG] = {
.get_num_of_ranges = iwl_dump_ini_mem_ranges,
.get_size = iwl_dump_ini_mem_get_size,
.fill_mem_hdr = iwl_dump_ini_mem_fill_header,
.fill_range = iwl_dump_ini_config_iter,
},
};
static u32 iwl_dump_ini_trigger(struct iwl_fw_runtime *fwrt,

View File

@ -236,6 +236,12 @@ static int iwl_dbg_tlv_alloc_region(struct iwl_trans *trans,
return -EINVAL;
}
if (type == IWL_FW_INI_REGION_PCI_IOSF_CONFIG &&
!trans->ops->read_config32) {
IWL_ERR(trans, "WRT: Unsupported region type %u\n", type);
return -EOPNOTSUPP;
}
active_reg = &trans->dbg.active_regions[id];
if (*active_reg) {
IWL_WARN(trans, "WRT: Overriding region id %u\n", id);

View File

@ -544,6 +544,8 @@ struct iwl_trans_rxq_dma_data {
* @read_mem: read device's SRAM in DWORD
* @write_mem: write device's SRAM in DWORD. If %buf is %NULL, then the memory
* will be zeroed.
* @read_config32: read a u32 value from the device's config space at
* the given offset.
* @configure: configure parameters required by the transport layer from
* the op_mode. May be called several times before start_fw, can't be
* called after that.
@ -614,6 +616,7 @@ struct iwl_trans_ops {
void *buf, int dwords);
int (*write_mem)(struct iwl_trans *trans, u32 addr,
const void *buf, int dwords);
int (*read_config32)(struct iwl_trans *trans, u32 ofs, u32 *val);
void (*configure)(struct iwl_trans *trans,
const struct iwl_trans_config *trans_cfg);
void (*set_pmi)(struct iwl_trans *trans, bool state);