mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 20:23:57 +08:00
Merge remote-tracking branch 'asoc/topic/wm8962' into asoc-next
This commit is contained in:
Mark Brown
commit
f57019aa0a
@ -8,9 +8,32 @@ Required properties:
|
||||
|
||||
- reg : the I2C address of the device.
|
||||
|
||||
Optional properties:
|
||||
- spk-mono: This is a boolean property. If present, the SPK_MONO bit
|
||||
of R51 (Class D Control 2) gets set, indicating that the speaker is
|
||||
in mono mode.
|
||||
|
||||
- mic-cfg : Default register value for R48 (Additional Control 4).
|
||||
If absent, the default should be the register default.
|
||||
|
||||
- gpio-cfg : A list of GPIO configuration register values. The list must
|
||||
be 6 entries long. If absent, no configuration of these registers is
|
||||
performed. And note that only the value within [0x0, 0xffff] is valid.
|
||||
Any other value is regarded as setting the GPIO register by its reset
|
||||
value 0x0.
|
||||
|
||||
Example:
|
||||
|
||||
codec: wm8962@1a {
|
||||
compatible = "wlf,wm8962";
|
||||
reg = <0x1a>;
|
||||
|
||||
gpio-cfg = <
|
||||
0x0000 /* 0:Default */
|
||||
0x0000 /* 1:Default */
|
||||
0x0013 /* 2:FN_DMICCLK */
|
||||
0x0000 /* 3:Default */
|
||||
0x8014 /* 4:FN_DMICCDAT */
|
||||
0x0000 /* 5:Default */
|
||||
>;
|
||||
};
|
||||
|
||||
@ -51,6 +51,7 @@ static const char *wm8962_supply_names[WM8962_NUM_SUPPLIES] = {
|
||||
|
||||
/* codec private data */
|
||||
struct wm8962_priv {
|
||||
struct wm8962_pdata pdata;
|
||||
struct regmap *regmap;
|
||||
struct snd_soc_codec *codec;
|
||||
|
||||
@ -2347,12 +2348,13 @@ static const struct snd_soc_dapm_route wm8962_spk_stereo_intercon[] = {
|
||||
|
||||
static int wm8962_add_widgets(struct snd_soc_codec *codec)
|
||||
{
|
||||
struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
|
||||
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
|
||||
struct wm8962_pdata *pdata = &wm8962->pdata;
|
||||
struct snd_soc_dapm_context *dapm = &codec->dapm;
|
||||
|
||||
snd_soc_add_codec_controls(codec, wm8962_snd_controls,
|
||||
ARRAY_SIZE(wm8962_snd_controls));
|
||||
if (pdata && pdata->spk_mono)
|
||||
if (pdata->spk_mono)
|
||||
snd_soc_add_codec_controls(codec, wm8962_spk_mono_controls,
|
||||
ARRAY_SIZE(wm8962_spk_mono_controls));
|
||||
else
|
||||
@ -2362,7 +2364,7 @@ static int wm8962_add_widgets(struct snd_soc_codec *codec)
|
||||
|
||||
snd_soc_dapm_new_controls(dapm, wm8962_dapm_widgets,
|
||||
ARRAY_SIZE(wm8962_dapm_widgets));
|
||||
if (pdata && pdata->spk_mono)
|
||||
if (pdata->spk_mono)
|
||||
snd_soc_dapm_new_controls(dapm, wm8962_dapm_spk_mono_widgets,
|
||||
ARRAY_SIZE(wm8962_dapm_spk_mono_widgets));
|
||||
else
|
||||
@ -2371,7 +2373,7 @@ static int wm8962_add_widgets(struct snd_soc_codec *codec)
|
||||
|
||||
snd_soc_dapm_add_routes(dapm, wm8962_intercon,
|
||||
ARRAY_SIZE(wm8962_intercon));
|
||||
if (pdata && pdata->spk_mono)
|
||||
if (pdata->spk_mono)
|
||||
snd_soc_dapm_add_routes(dapm, wm8962_spk_mono_intercon,
|
||||
ARRAY_SIZE(wm8962_spk_mono_intercon));
|
||||
else
|
||||
@ -3335,14 +3337,14 @@ static struct gpio_chip wm8962_template_chip = {
|
||||
static void wm8962_init_gpio(struct snd_soc_codec *codec)
|
||||
{
|
||||
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
|
||||
struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
|
||||
struct wm8962_pdata *pdata = &wm8962->pdata;
|
||||
int ret;
|
||||
|
||||
wm8962->gpio_chip = wm8962_template_chip;
|
||||
wm8962->gpio_chip.ngpio = WM8962_MAX_GPIO;
|
||||
wm8962->gpio_chip.dev = codec->dev;
|
||||
|
||||
if (pdata && pdata->gpio_base)
|
||||
if (pdata->gpio_base)
|
||||
wm8962->gpio_chip.base = pdata->gpio_base;
|
||||
else
|
||||
wm8962->gpio_chip.base = -1;
|
||||
@ -3422,7 +3424,6 @@ static int wm8962_probe(struct snd_soc_codec *codec)
|
||||
WM8962_OSC_ENA | WM8962_PLL2_ENA | WM8962_PLL3_ENA,
|
||||
0);
|
||||
|
||||
if (pdata) {
|
||||
/* Apply static configuration for GPIOs */
|
||||
for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++)
|
||||
if (pdata->gpio_init[i]) {
|
||||
@ -3431,12 +3432,12 @@ static int wm8962_probe(struct snd_soc_codec *codec)
|
||||
pdata->gpio_init[i] & 0xffff);
|
||||
}
|
||||
|
||||
|
||||
/* Put the speakers into mono mode? */
|
||||
if (pdata->spk_mono)
|
||||
snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_2,
|
||||
WM8962_SPK_MONO_MASK, WM8962_SPK_MONO);
|
||||
|
||||
|
||||
/* Micbias setup, detection enable and detection
|
||||
* threasholds. */
|
||||
if (pdata->mic_cfg)
|
||||
@ -3446,7 +3447,6 @@ static int wm8962_probe(struct snd_soc_codec *codec)
|
||||
WM8962_MICSHORT_THR_MASK |
|
||||
WM8962_MICBIAS_LVL,
|
||||
pdata->mic_cfg);
|
||||
}
|
||||
|
||||
/* Latch volume update bits */
|
||||
snd_soc_update_bits(codec, WM8962_LEFT_INPUT_VOLUME,
|
||||
@ -3508,7 +3508,7 @@ static int wm8962_probe(struct snd_soc_codec *codec)
|
||||
wm8962_init_gpio(codec);
|
||||
|
||||
if (wm8962->irq) {
|
||||
if (pdata && pdata->irq_active_low) {
|
||||
if (pdata->irq_active_low) {
|
||||
trigger = IRQF_TRIGGER_LOW;
|
||||
irq_pol = WM8962_IRQ_POL;
|
||||
} else {
|
||||
@ -3586,6 +3586,34 @@ static const struct regmap_config wm8962_regmap = {
|
||||
.cache_type = REGCACHE_RBTREE,
|
||||
};
|
||||
|
||||
static int wm8962_set_pdata_from_of(struct i2c_client *i2c,
|
||||
struct wm8962_pdata *pdata)
|
||||
{
|
||||
const struct device_node *np = i2c->dev.of_node;
|
||||
u32 val32;
|
||||
int i;
|
||||
|
||||
if (of_property_read_bool(np, "spk-mono"))
|
||||
pdata->spk_mono = true;
|
||||
|
||||
if (of_property_read_u32(np, "mic-cfg", &val32) >= 0)
|
||||
pdata->mic_cfg = val32;
|
||||
|
||||
if (of_property_read_u32_array(np, "gpio-cfg", pdata->gpio_init,
|
||||
ARRAY_SIZE(pdata->gpio_init)) >= 0)
|
||||
for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++) {
|
||||
/*
|
||||
* The range of GPIO register value is [0x0, 0xffff]
|
||||
* While the default value of each register is 0x0
|
||||
* Any other value will be regarded as default value
|
||||
*/
|
||||
if (pdata->gpio_init[i] > 0xffff)
|
||||
pdata->gpio_init[i] = 0x0;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int wm8962_i2c_probe(struct i2c_client *i2c,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
@ -3605,6 +3633,15 @@ static int wm8962_i2c_probe(struct i2c_client *i2c,
|
||||
init_completion(&wm8962->fll_lock);
|
||||
wm8962->irq = i2c->irq;
|
||||
|
||||
/* If platform data was supplied, update the default data in priv */
|
||||
if (pdata) {
|
||||
memcpy(&wm8962->pdata, pdata, sizeof(struct wm8962_pdata));
|
||||
} else if (i2c->dev.of_node) {
|
||||
ret = wm8962_set_pdata_from_of(i2c, &wm8962->pdata);
|
||||
if (ret != 0)
|
||||
return ret;
|
||||
}
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++)
|
||||
wm8962->supplies[i].supply = wm8962_supply_names[i];
|
||||
|
||||
@ -3668,7 +3705,7 @@ static int wm8962_i2c_probe(struct i2c_client *i2c,
|
||||
goto err_enable;
|
||||
}
|
||||
|
||||
if (pdata && pdata->in4_dc_measure) {
|
||||
if (wm8962->pdata.in4_dc_measure) {
|
||||
ret = regmap_register_patch(wm8962->regmap,
|
||||
wm8962_dc_measure,
|
||||
ARRAY_SIZE(wm8962_dc_measure));
|
||||
@ -3721,6 +3758,21 @@ static int wm8962_runtime_resume(struct device *dev)
|
||||
|
||||
wm8962_reset(wm8962);
|
||||
|
||||
/* SYSCLK defaults to on; make sure it is off so we can safely
|
||||
* write to registers if the device is declocked.
|
||||
*/
|
||||
regmap_update_bits(wm8962->regmap, WM8962_CLOCKING2,
|
||||
WM8962_SYSCLK_ENA, 0);
|
||||
|
||||
/* Ensure we have soft control over all registers */
|
||||
regmap_update_bits(wm8962->regmap, WM8962_CLOCKING2,
|
||||
WM8962_CLKREG_OVD, WM8962_CLKREG_OVD);
|
||||
|
||||
/* Ensure that the oscillator and PLLs are disabled */
|
||||
regmap_update_bits(wm8962->regmap, WM8962_PLL2,
|
||||
WM8962_OSC_ENA | WM8962_PLL2_ENA | WM8962_PLL3_ENA,
|
||||
0);
|
||||
|
||||
regcache_sync(wm8962->regmap);
|
||||
|
||||
regmap_update_bits(wm8962->regmap, WM8962_ANTI_POP,
|
||||
|
||||
Loading…
Reference in New Issue
Block a user