renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
Code

net: ethernet: mediatek: add support for GMAC0 connecting with external PHY through TRGMII

Browse Source 
Changing dynamically source clock, TX/RX delay and interface mode
used by TRGMII hardware module inside PHY capability polling routine
for adapting to the various speed of RGMII used by external PHY for
GMAC0.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Sean Wang 2016-09-22 10:33:55 +08:00 committed by David S. Miller
parent 572de608e3
commit f430dea7c1
2 changed files with 61 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
drivers/net/ethernet/mediatek/mtk_eth_soc.c
View File

@ -52,7 +52,7 @@ static const struct mtk_ethtool_stats {
};
static const char * const mtk_clks_source_name[] = {
"ethif", "esw", "gp1", "gp2"
"ethif", "esw", "gp1", "gp2", "trgpll"
};
void mtk_w32(struct mtk_eth *eth, u32 val, unsigned reg)
@ -135,6 +135,33 @@ static int mtk_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
return _mtk_mdio_read(eth, phy_addr, phy_reg);
}
static void mtk_gmac0_rgmii_adjust(struct mtk_eth *eth, int speed)
{
u32 val;
int ret;
val = (speed == SPEED_1000) ?
INTF_MODE_RGMII_1000 : INTF_MODE_RGMII_10_100;
mtk_w32(eth, val, INTF_MODE);
regmap_update_bits(eth->ethsys, ETHSYS_CLKCFG0,
ETHSYS_TRGMII_CLK_SEL362_5,
ETHSYS_TRGMII_CLK_SEL362_5);
val = (speed == SPEED_1000) ? 250000000 : 500000000;
ret = clk_set_rate(eth->clks[MTK_CLK_TRGPLL], val);
if (ret)
dev_err(eth->dev, "Failed to set trgmii pll: %d\n", ret);
val = (speed == SPEED_1000) ?
RCK_CTRL_RGMII_1000 : RCK_CTRL_RGMII_10_100;
mtk_w32(eth, val, TRGMII_RCK_CTRL);
val = (speed == SPEED_1000) ?
TCK_CTRL_RGMII_1000 : TCK_CTRL_RGMII_10_100;
mtk_w32(eth, val, TRGMII_TCK_CTRL);
}
static void mtk_phy_link_adjust(struct net_device *dev)
{
struct mtk_mac *mac = netdev_priv(dev);
@ -157,6 +184,9 @@ static void mtk_phy_link_adjust(struct net_device *dev)
break;
};
if (mac->id == 0 && !mac->trgmii)
mtk_gmac0_rgmii_adjust(mac->hw, mac->phy_dev->speed);
if (mac->phy_dev->link)
mcr |= MAC_MCR_FORCE_LINK;

31
drivers/net/ethernet/mediatek/mtk_eth_soc.h
View File

@ -313,6 +313,30 @@
MAC_MCR_FORCE_TX_FC | MAC_MCR_SPEED_1000 | \
MAC_MCR_FORCE_DPX | MAC_MCR_FORCE_LINK)
/* TRGMII RXC control register */
#define TRGMII_RCK_CTRL 0x10300
#define DQSI0(x) ((x << 0) & GENMASK(6, 0))
#define DQSI1(x) ((x << 8) & GENMASK(14, 8))
#define RXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16))
#define RXC_DQSISEL BIT(30)
#define RCK_CTRL_RGMII_1000 (RXC_DQSISEL | RXCTL_DMWTLAT(2) | DQSI1(16))
#define RCK_CTRL_RGMII_10_100 RXCTL_DMWTLAT(2)
/* TRGMII RXC control register */
#define TRGMII_TCK_CTRL 0x10340
#define TXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16))
#define TXC_INV BIT(30)
#define TCK_CTRL_RGMII_1000 TXCTL_DMWTLAT(2)
#define TCK_CTRL_RGMII_10_100 (TXC_INV | TXCTL_DMWTLAT(2))
/* TRGMII Interface mode register */
#define INTF_MODE 0x10390
#define TRGMII_INTF_DIS BIT(0)
#define TRGMII_MODE BIT(1)
#define TRGMII_CENTRAL_ALIGNED BIT(2)
#define INTF_MODE_RGMII_1000 (TRGMII_MODE | TRGMII_CENTRAL_ALIGNED)
#define INTF_MODE_RGMII_10_100 0
/* GPIO port control registers for GMAC 2*/
#define GPIO_OD33_CTRL8 0x4c0
#define GPIO_BIAS_CTRL 0xed0
@ -323,7 +347,11 @@
#define SYSCFG0_GE_MASK 0x3
#define SYSCFG0_GE_MODE(x, y) (x << (12 + (y * 2)))
/*ethernet reset control register*/
/* ethernet subsystem clock register */
#define ETHSYS_CLKCFG0 0x2c
#define ETHSYS_TRGMII_CLK_SEL362_5 BIT(11)
/* ethernet reset control register */
#define ETHSYS_RSTCTRL 0x34
#define RSTCTRL_FE BIT(6)
#define RSTCTRL_PPE BIT(31)
@ -389,6 +417,7 @@ enum mtk_clks_map {
MTK_CLK_ESW,
MTK_CLK_GP1,
MTK_CLK_GP2,
MTK_CLK_TRGPLL,
MTK_CLK_MAX
};