Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  omap-serial: Allow IXON and IXOFF to be disabled.
  TTY: serial, document ignoring of uart->ops->startup error
  TTY: pty, fix pty counting
  8250: Fix race condition in serial8250_backup_timeout().
  serial/8250_pci: delete duplicate data definition
  8250_pci: add support for Rosewill RC-305 4x serial port card
  tty: Add "spi:" prefix for spi modalias
  atmel_serial: fix atmel_default_console_device
  serial: 8250_pnp: add Intermec CV60 touchscreen device
  drivers/serial/ucc_uart.c: Fix compiler warning
  pch_uart: Set PCIe bus number using probe parameter
  serial: samsung: Fix build error

drivers/tty/pty.c

@@ -446,8 +446,19 @@ static inline void legacy_pty_init(void) { }
 int pty_limit = NR_UNIX98_PTY_DEFAULT;
 static int pty_limit_min;
 static int pty_limit_max = NR_UNIX98_PTY_MAX;
+static int tty_count;
 static int pty_count;
 
+static inline void pty_inc_count(void)
+{
+	pty_count = (++tty_count) / 2;
+}
+
+static inline void pty_dec_count(void)
+{
+	pty_count = (--tty_count) / 2;
+}
+
 static struct cdev ptmx_cdev;
 
 static struct ctl_table pty_table[] = {
@@ -542,6 +553,7 @@ static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver,
 
 static void pty_unix98_shutdown(struct tty_struct *tty)
 {
+	tty_driver_remove_tty(tty->driver, tty);
 	/* We have our own method as we don't use the tty index */
 	kfree(tty->termios);
 }
@@ -588,7 +600,8 @@ static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty)
 	 */
 	tty_driver_kref_get(driver);
 	tty->count++;
-	pty_count++;
+	pty_inc_count(); /* tty */
+	pty_inc_count(); /* tty->link */
 	return 0;
 err_free_mem:
 	deinitialize_tty_struct(o_tty);
@@ -602,7 +615,7 @@ err_free_tty:
 
 static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
 {
-	pty_count--;
+	pty_dec_count();
 }
 
 static const struct tty_operations ptm_unix98_ops = {

drivers/tty/serial/8250.c

@@ -1819,6 +1819,8 @@ static void serial8250_backup_timeout(unsigned long data)
 	unsigned int iir, ier = 0, lsr;
 	unsigned long flags;
 
+	spin_lock_irqsave(&up->port.lock, flags);
+
 	/*
 	 * Must disable interrupts or else we risk racing with the interrupt
 	 * based handler.
@@ -1836,10 +1838,8 @@ static void serial8250_backup_timeout(unsigned long data)
 	 * the "Diva" UART used on the management processor on many HP
 	 * ia64 and parisc boxes.
 	 */
-	spin_lock_irqsave(&up->port.lock, flags);
 	lsr = serial_in(up, UART_LSR);
 	up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
-	spin_unlock_irqrestore(&up->port.lock, flags);
 	if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
 	    (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) &&
 	    (lsr & UART_LSR_THRE)) {
@@ -1848,11 +1848,13 @@ static void serial8250_backup_timeout(unsigned long data)
 	}
 
 	if (!(iir & UART_IIR_NO_INT))
-		serial8250_handle_port(up);
+		transmit_chars(up);
 
 	if (is_real_interrupt(up->port.irq))
 		serial_out(up, UART_IER, ier);
 
+	spin_unlock_irqrestore(&up->port.lock, flags);
+
 	/* Standard timer interval plus 0.2s to keep the port running */
 	mod_timer(&up->timer,
 		jiffies + uart_poll_timeout(&up->port) + HZ / 5);

drivers/tty/serial/8250_pci.c

@@ -1599,11 +1599,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.device         = 0x800D,
 		.init		= pci_eg20t_init,
 	},
-	{
-		.vendor         = 0x10DB,
-		.device         = 0x800D,
-		.init		= pci_eg20t_init,
-	},
 	/*
 	 * Cronyx Omega PCI (PLX-chip based)
 	 */
@@ -4021,13 +4016,17 @@ static struct pci_device_id serial_pci_tbl[] = {
 		0, 0, pbn_NETMOS9900_2s_115200 },
 
 	/*
-	 * Best Connectivity PCI Multi I/O cards
+	 * Best Connectivity and Rosewill PCI Multi I/O cards
 	 */
 
 	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
 		0xA000, 0x1000,
 		0, 0, pbn_b0_1_115200 },
 
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+		0xA000, 0x3002,
+		0, 0, pbn_b0_bt_2_115200 },
+
 	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
 		0xA000, 0x3004,
 		0, 0, pbn_b0_bt_4_115200 },

drivers/tty/serial/8250_pnp.c

@@ -109,6 +109,9 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	/* IBM */
 	/* IBM Thinkpad 701 Internal Modem Voice */
 	{	"IBM0033",		0	},
+	/* Intermec */
+	/* Intermec CV60 touchscreen port */
+	{	"PNP4972",		0	},
 	/* Intertex */
 	/* Intertex 28k8 33k6 Voice EXT PnP */
 	{	"IXDC801",		0	},

drivers/tty/serial/atmel_serial.c

@@ -1609,9 +1609,11 @@ static struct console atmel_console = {
 static int __init atmel_console_init(void)
 {
 	if (atmel_default_console_device) {
-		add_preferred_console(ATMEL_DEVICENAME,
-				      atmel_default_console_device->id, NULL);
-		atmel_init_port(&atmel_ports[atmel_default_console_device->id],
+		struct atmel_uart_data *pdata =
+			atmel_default_console_device->dev.platform_data;
+
+		add_preferred_console(ATMEL_DEVICENAME, pdata->num, NULL);
+		atmel_init_port(&atmel_ports[pdata->num],
 				atmel_default_console_device);
 		register_console(&atmel_console);
 	}

drivers/tty/serial/max3107-aava.c

@@ -340,5 +340,5 @@ module_exit(max3107_exit);
 
 MODULE_DESCRIPTION("MAX3107 driver");
 MODULE_AUTHOR("Aavamobile");
-MODULE_ALIAS("aava-max3107-spi");
+MODULE_ALIAS("spi:aava-max3107");
 MODULE_LICENSE("GPL v2");

drivers/tty/serial/max3107.c

@@ -1209,5 +1209,5 @@ module_exit(max3107_exit);
 
 MODULE_DESCRIPTION("MAX3107 driver");
 MODULE_AUTHOR("Aavamobile");
-MODULE_ALIAS("max3107-spi");
+MODULE_ALIAS("spi:max3107");
 MODULE_LICENSE("GPL v2");

drivers/tty/serial/mrst_max3110.c

@@ -917,4 +917,4 @@ module_init(serial_m3110_init);
 module_exit(serial_m3110_exit);
 
 MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("max3110-uart");
+MODULE_ALIAS("spi:max3110-uart");

drivers/tty/serial/omap-serial.c

@@ -806,8 +806,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	serial_omap_set_mctrl(&up->port, up->port.mctrl);
 	/* Software Flow Control Configuration */
-	if (termios->c_iflag & (IXON | IXOFF))
-		serial_omap_configure_xonxoff(up, termios);
+	serial_omap_configure_xonxoff(up, termios);
 
 	spin_unlock_irqrestore(&up->port.lock, flags);
 	dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id);

drivers/tty/serial/pch_uart.c

@@ -598,7 +598,8 @@ static void pch_request_dma(struct uart_port *port)
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 
-	dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(0xa, 0)); /* Get DMA's dev
+	dma_dev = pci_get_bus_and_slot(priv->pdev->bus->number,
+				       PCI_DEVFN(0xa, 0)); /* Get DMA's dev
 								information */
 	/* Set Tx DMA */
 	param = &priv->param_tx;

drivers/tty/serial/samsung.c

@@ -1225,15 +1225,19 @@ static const struct dev_pm_ops s3c24xx_serial_pm_ops = {
 	.suspend = s3c24xx_serial_suspend,
 	.resume = s3c24xx_serial_resume,
 };
+#define SERIAL_SAMSUNG_PM_OPS	(&s3c24xx_serial_pm_ops)
+
 #else /* !CONFIG_PM_SLEEP */
-#define s3c24xx_serial_pm_ops	NULL
+
+#define SERIAL_SAMSUNG_PM_OPS	NULL
 #endif /* CONFIG_PM_SLEEP */
 
 int s3c24xx_serial_init(struct platform_driver *drv,
 			struct s3c24xx_uart_info *info)
 {
 	dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
-	drv->driver.pm = &s3c24xx_serial_pm_ops;
+
+	drv->driver.pm = SERIAL_SAMSUNG_PM_OPS;
 
 	return platform_driver_register(drv);
 }

drivers/tty/serial/serial_core.c

@@ -200,6 +200,11 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state, int in
 		clear_bit(TTY_IO_ERROR, &tty->flags);
 	}
 
+	/*
+	 * This is to allow setserial on this port. People may want to set
+	 * port/irq/type and then reconfigure the port properly if it failed
+	 * now.
+	 */
 	if (retval && capable(CAP_SYS_ADMIN))
 		retval = 0;
 

drivers/tty/serial/ucc_uart.c

@@ -235,7 +235,7 @@ static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port)
 		return qe_port->bd_virt + (addr - qe_port->bd_dma_addr);
 
 	/* something nasty happened */
-	printk(KERN_ERR "%s: addr=%x\n", __func__, addr);
+	printk(KERN_ERR "%s: addr=%llx\n", __func__, (u64)addr);
 	BUG();
 	return NULL;
 }

drivers/tty/tty_io.c

@@ -1295,8 +1295,7 @@ static int tty_driver_install_tty(struct tty_driver *driver,
  *
  *	Locking: tty_mutex for now
  */
-static void tty_driver_remove_tty(struct tty_driver *driver,
-						struct tty_struct *tty)
+void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty)
 {
 	if (driver->ops->remove)
 		driver->ops->remove(driver, tty);

include/linux/tty.h

@@ -421,6 +421,8 @@ extern void tty_driver_flush_buffer(struct tty_struct *tty);
 extern void tty_throttle(struct tty_struct *tty);
 extern void tty_unthrottle(struct tty_struct *tty);
 extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
+extern void tty_driver_remove_tty(struct tty_driver *driver,
+				  struct tty_struct *tty);
 extern void tty_shutdown(struct tty_struct *tty);
 extern void tty_free_termios(struct tty_struct *tty);
 extern int is_current_pgrp_orphaned(void);

include/linux/tty_driver.h

@@ -47,6 +47,9 @@
  *
  * 	This routine is called synchronously when a particular tty device
  *	is closed for the last time freeing up the resources.
+ *	Note that tty_shutdown() is not called if ops->shutdown is defined.
+ *	This means one is responsible to take care of calling ops->remove (e.g.
+ *	via tty_driver_remove_tty) and releasing tty->termios.
  *
  *
  * void (*cleanup)(struct tty_struct * tty);