renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 05:34:00 +08:00
Code

ASoC: Updates for v4.21

Browse Source 
Not much work on the core this time around but we've seen quite a bit of
 driver work, including on the generic DT drivers.  There's also a large
 part of the diff from a merge of the DaVinci and OMAP directories, along
 with some active development there:
 
  - Preparatory work from Morimoto-san for merging the audio-graph and
    audio-graph-scu cards.
  - A merge of the TI OMAP and DaVinci directories, the OMAP product line
    has been merged into the DaVinci product line so there is now a lot
    of IP sharing which meant that the split directories just got in the
    way.  This has pulled in a few architecture changes as well.
  - A big cleanup of the Maxim MAX9867 driver from Ladislav Michl.
  - Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with
    RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx I2S
    controllers.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlwY7KsTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0MFqB/4m9nlfUeXTpiSD1FgVIlMmdPNUg4V2
 6Ybztaw4kRc5LuQN8PXQmaFLx020yAnLvI7Zzj7l3K8r6a9lfyFs+pKL0wtBnNK2
 9QEFmOVQ3QFpt31Yb2IQeO4dfNbiyKeczjLau4mXWTl0j5dc/UH+HasE1dRZOxsC
 rqJ8IsdibIVxVtQ7ZmcnU+y6XK0inBHAAh6ksMehsufShGrfrLs/nRBaXRZcRqJg
 ciSFY5uYRYkDxTgogTpNRfVy4nr17N10+0sgrQ3RtaaqgG3gBXsHca1meyxKYW3Q
 TssOJGIl3+uGiAMNyZqzxe5pAwwuGhZ3hAAAODtfYJQtAuAOW3/45Wqh
 =phWF
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v4.21

Not much work on the core this time around but we've seen quite a bit of
driver work, including on the generic DT drivers.  There's also a large
part of the diff from a merge of the DaVinci and OMAP directories, along
with some active development there:

 - Preparatory work from Morimoto-san for merging the audio-graph and
   audio-graph-scu cards.
 - A merge of the TI OMAP and DaVinci directories, the OMAP product line
   has been merged into the DaVinci product line so there is now a lot
   of IP sharing which meant that the split directories just got in the
   way.  This has pulled in a few architecture changes as well.
 - A big cleanup of the Maxim MAX9867 driver from Ladislav Michl.
 - Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with
   RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx I2S
   controllers.
This commit is contained in:
Takashi Iwai 2018-12-18 14:59:56 +01:00
commit ed49e83919
1170 changed files with 21426 additions and 9690 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
CREDITS
View File

@ -2204,6 +2204,10 @@ S: Post Office Box 371
S: North Little Rock, Arkansas 72115
S: USA
N: Christopher Li
E: sparse@chrisli.org
D: Sparse maintainer 2009 - 2018
N: Stephan Linz
E: linz@mazet.de
E: Stephan.Linz@gmx.de
@ -2537,6 +2541,10 @@ S: Ormond
S: Victoria 3163
S: Australia
N: Eric Miao
E: eric.y.miao@gmail.com
D: MMP support
N: Pauline Middelink
E: middelin@polyware.nl
D: General low-level bug fixes, /proc fixes, identd support
@ -4111,6 +4119,10 @@ S: 1507 145th Place SE #B5
S: Bellevue, Washington 98007
S: USA
N: Haojian Zhuang
E: haojian.zhuang@gmail.com
D: MMP support
N: Richard Zidlicky
E: rz@linux-m68k.org, rdzidlic@geocities.com
W: http://www.geocities.com/rdzidlic

2
Documentation/ABI/testing/sysfs-class-net-dsa
View File

@ -1,4 +1,4 @@
What: /sys/class/net/<iface>/tagging
What: /sys/class/net/<iface>/dsa/tagging
Date: August 2018
KernelVersion: 4.20
Contact: netdev@vger.kernel.org

65
Documentation/admin-guide/kernel-parameters.txt
View File

@ -856,7 +856,8 @@
causing system reset or hang due to sending
INIT from AP to BSP.
disable_counter_freezing [HW]
perf_v4_pmi= [X86,INTEL]
Format: <bool>
Disable Intel PMU counter freezing feature.
The feature only exists starting from
Arch Perfmon v4 (Skylake and newer).
@ -3504,6 +3505,10 @@
before loading.
See Documentation/blockdev/ramdisk.txt.
psi= [KNL] Enable or disable pressure stall information
tracking.
Format: <bool>
psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to
probe for; one of (bare|imps|exps|lifebook|any).
psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports
@ -4194,9 +4199,13 @@
spectre_v2= [X86] Control mitigation of Spectre variant 2
(indirect branch speculation) vulnerability.
The default operation protects the kernel from
user space attacks.
on - unconditionally enable
off - unconditionally disable
on - unconditionally enable, implies
spectre_v2_user=on
off - unconditionally disable, implies
spectre_v2_user=off
auto - kernel detects whether your CPU model is
vulnerable
@ -4206,6 +4215,12 @@
CONFIG_RETPOLINE configuration option, and the
compiler with which the kernel was built.
Selecting 'on' will also enable the mitigation
against user space to user space task attacks.
Selecting 'off' will disable both the kernel and
the user space protections.
Specific mitigations can also be selected manually:
retpoline - replace indirect branches
@ -4215,6 +4230,48 @@
Not specifying this option is equivalent to
spectre_v2=auto.
spectre_v2_user=
[X86] Control mitigation of Spectre variant 2
(indirect branch speculation) vulnerability between
user space tasks
on - Unconditionally enable mitigations. Is
enforced by spectre_v2=on
off - Unconditionally disable mitigations. Is
enforced by spectre_v2=off
prctl - Indirect branch speculation is enabled,
but mitigation can be enabled via prctl
per thread. The mitigation control state
is inherited on fork.
prctl,ibpb
- Like "prctl" above, but only STIBP is
controlled per thread. IBPB is issued
always when switching between different user
space processes.
seccomp
- Same as "prctl" above, but all seccomp
threads will enable the mitigation unless
they explicitly opt out.
seccomp,ibpb
- Like "seccomp" above, but only STIBP is
controlled per thread. IBPB is issued
always when switching between different
user space processes.
auto - Kernel selects the mitigation depending on
the available CPU features and vulnerability.
Default mitigation:
If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl"
Not specifying this option is equivalent to
spectre_v2_user=auto.
spec_store_bypass_disable=
[HW] Control Speculative Store Bypass (SSB) Disable mitigation
(Speculative Store Bypass vulnerability)
@ -4713,6 +4770,8 @@
prevent spurious wakeup);
n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a
pause after every control message);
o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra
delay after resetting its port);
Example: quirks=0781:5580:bk,0a5c:5834:gij
usbhid.mousepoll=

19
Documentation/admin-guide/security-bugs.rst
View File

@ -32,16 +32,17 @@ Disclosure and embargoed information
The security list is not a disclosure channel. For that, see Coordination
below.
Once a robust fix has been developed, our preference is to release the
fix in a timely fashion, treating it no differently than any of the other
thousands of changes and fixes the Linux kernel project releases every
month.
Once a robust fix has been developed, the release process starts. Fixes
for publicly known bugs are released immediately.
However, at the request of the reporter, we will postpone releasing the
fix for up to 5 business days after the date of the report or after the
embargo has lifted; whichever comes first. The only exception to that
rule is if the bug is publicly known, in which case the preference is to
release the fix as soon as it's available.
Although our preference is to release fixes for publicly undisclosed bugs
as soon as they become available, this may be postponed at the request of
the reporter or an affected party for up to 7 calendar days from the start
of the release process, with an exceptional extension to 14 calendar days
if it is agreed that the criticality of the bug requires more time. The
only valid reason for deferring the publication of a fix is to accommodate
the logistics of QA and large scale rollouts which require release
coordination.
Whilst embargoed information may be shared with trusted individuals in
order to develop a fix, such information will not be published alongside

1
Documentation/arm64/silicon-errata.txt
View File

@ -57,6 +57,7 @@ stable kernels.
| ARM | Cortex-A73 | #858921 | ARM64_ERRATUM_858921 |
| ARM | Cortex-A55 | #1024718 | ARM64_ERRATUM_1024718 |
| ARM | Cortex-A76 | #1188873 | ARM64_ERRATUM_1188873 |
| ARM | Cortex-A76 | #1286807 | ARM64_ERRATUM_1286807 |
| ARM | MMU-500 | #841119,#826419 | N/A |
| | | | |
| Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 |

55
Documentation/core-api/xarray.rst
View File

@ -74,7 +74,8 @@ using :c:func:`xa_load`. xa_store will overwrite any entry with the
new entry and return the previous entry stored at that index. You can
use :c:func:`xa_erase` instead of calling :c:func:`xa_store` with a
``NULL`` entry. There is no difference between an entry that has never
been stored to and one that has most recently had ``NULL`` stored to it.
been stored to, one that has been erased and one that has most recently
had ``NULL`` stored to it.
You can conditionally replace an entry at an index by using
:c:func:`xa_cmpxchg`. Like :c:func:`cmpxchg`, it will only succeed if
@ -105,23 +106,44 @@ may result in the entry being marked at some, but not all of the other
indices. Storing into one index may result in the entry retrieved by
some, but not all of the other indices changing.
Sometimes you need to ensure that a subsequent call to :c:func:`xa_store`
will not need to allocate memory. The :c:func:`xa_reserve` function
will store a reserved entry at the indicated index. Users of the normal
API will see this entry as containing ``NULL``. If you do not need to
use the reserved entry, you can call :c:func:`xa_release` to remove the
unused entry. If another user has stored to the entry in the meantime,
:c:func:`xa_release` will do nothing; if instead you want the entry to
become ``NULL``, you should use :c:func:`xa_erase`.
If all entries in the array are ``NULL``, the :c:func:`xa_empty` function
will return ``true``.
Finally, you can remove all entries from an XArray by calling
:c:func:`xa_destroy`. If the XArray entries are pointers, you may wish
to free the entries first. You can do this by iterating over all present
entries in the XArray using the :c:func:`xa_for_each` iterator.
ID assignment
-------------
Allocating XArrays
------------------
If you use :c:func:`DEFINE_XARRAY_ALLOC` to define the XArray, or
initialise it by passing ``XA_FLAGS_ALLOC`` to :c:func:`xa_init_flags`,
the XArray changes to track whether entries are in use or not.
You can call :c:func:`xa_alloc` to store the entry at any unused index
in the XArray. If you need to modify the array from interrupt context,
you can use :c:func:`xa_alloc_bh` or :c:func:`xa_alloc_irq` to disable
interrupts while allocating the ID. Unlike :c:func:`xa_store`, allocating
a ``NULL`` pointer does not delete an entry. Instead it reserves an
entry like :c:func:`xa_reserve` and you can release it using either
:c:func:`xa_erase` or :c:func:`xa_release`. To use ID assignment, the
XArray must be defined with :c:func:`DEFINE_XARRAY_ALLOC`, or initialised
by passing ``XA_FLAGS_ALLOC`` to :c:func:`xa_init_flags`,
interrupts while allocating the ID.
Using :c:func:`xa_store`, :c:func:`xa_cmpxchg` or :c:func:`xa_insert`
will mark the entry as being allocated. Unlike a normal XArray, storing
``NULL`` will mark the entry as being in use, like :c:func:`xa_reserve`.
To free an entry, use :c:func:`xa_erase` (or :c:func:`xa_release` if
you only want to free the entry if it's ``NULL``).
You cannot use ``XA_MARK_0`` with an allocating XArray as this mark
is used to track whether an entry is free or not. The other marks are
available for your use.
Memory allocation
-----------------
@ -158,15 +180,22 @@ Takes RCU read lock:
Takes xa_lock internally:
* :c:func:`xa_store`
* :c:func:`xa_store_bh`
* :c:func:`xa_store_irq`
* :c:func:`xa_insert`
* :c:func:`xa_erase`
* :c:func:`xa_erase_bh`
* :c:func:`xa_erase_irq`
* :c:func:`xa_cmpxchg`
* :c:func:`xa_cmpxchg_bh`
* :c:func:`xa_cmpxchg_irq`
* :c:func:`xa_store_range`
* :c:func:`xa_alloc`
* :c:func:`xa_alloc_bh`
* :c:func:`xa_alloc_irq`
* :c:func:`xa_reserve`
* :c:func:`xa_reserve_bh`
* :c:func:`xa_reserve_irq`
* :c:func:`xa_destroy`
* :c:func:`xa_set_mark`
* :c:func:`xa_clear_mark`
@ -177,6 +206,7 @@ Assumes xa_lock held on entry:
* :c:func:`__xa_erase`
* :c:func:`__xa_cmpxchg`
* :c:func:`__xa_alloc`
* :c:func:`__xa_reserve`
* :c:func:`__xa_set_mark`
* :c:func:`__xa_clear_mark`
@ -234,7 +264,9 @@ Sharing the XArray with interrupt context is also possible, either
using :c:func:`xa_lock_irqsave` in both the interrupt handler and process
context, or :c:func:`xa_lock_irq` in process context and :c:func:`xa_lock`
in the interrupt handler. Some of the more common patterns have helper
functions such as :c:func:`xa_erase_bh` and :c:func:`xa_erase_irq`.
functions such as :c:func:`xa_store_bh`, :c:func:`xa_store_irq`,
:c:func:`xa_erase_bh`, :c:func:`xa_erase_irq`, :c:func:`xa_cmpxchg_bh`
and :c:func:`xa_cmpxchg_irq`.
Sometimes you need to protect access to the XArray with a mutex because
that lock sits above another mutex in the locking hierarchy. That does
@ -322,7 +354,8 @@ to :c:func:`xas_retry`, and retry the operation if it returns ``true``.
- :c:func:`xa_is_zero`
- Zero entries appear as ``NULL`` through the Normal API, but occupy
an entry in the XArray which can be used to reserve the index for
future use.
future use. This is used by allocating XArrays for allocated entries
which are ``NULL``.
Other internal entries may be added in the future. As far as possible, they
will be handled by :c:func:`xas_retry`.

16
Documentation/devicetree/bindings/clock/clock-bindings.txt
View File

@ -168,3 +168,19 @@ a shared clock is forbidden.
Configuration of common clocks, which affect multiple consumer devices can
be similarly specified in the clock provider node.
==Protected clocks==
Some platforms or firmwares may not fully expose all the clocks to the OS, such
as in situations where those clks are used by drivers running in ARM secure
execution levels. Such a configuration can be specified in device tree with the
protected-clocks property in the form of a clock specifier list. This property should
only be specified in the node that is providing the clocks being protected:
clock-controller@a000f000 {
compatible = "vendor,clk95;
reg = <0xa000f000 0x1000>
#clocks-cells = <1>;
...
protected-clocks = <UART3_CLK>, <SPI5_CLK>;
};

2
Documentation/devicetree/bindings/input/input-reset.txt
View File

@ -12,7 +12,7 @@ The /chosen node should contain a 'linux,sysrq-reset-seq' child node to define
a set of keys.
Required property:
sysrq-reset-seq: array of Linux keycodes, one keycode per cell.
keyset: array of Linux keycodes, one keycode per cell.
Optional property:
timeout-ms: duration keys must be pressed together in milliseconds before

29
Documentation/devicetree/bindings/media/rockchip-vpu.txt
View File

@ -1,29 +0,0 @@
device-tree bindings for rockchip VPU codec
Rockchip (Video Processing Unit) present in various Rockchip platforms,
such as RK3288 and RK3399.
Required properties:
- compatible: value should be one of the following
"rockchip,rk3288-vpu";
"rockchip,rk3399-vpu";
- interrupts: encoding and decoding interrupt specifiers
- interrupt-names: should be "vepu" and "vdpu"
- clocks: phandle to VPU aclk, hclk clocks
- clock-names: should be "aclk" and "hclk"
- power-domains: phandle to power domain node
- iommus: phandle to a iommu node
Example:
SoC-specific DT entry:
vpu: video-codec@ff9a0000 {
compatible = "rockchip,rk3288-vpu";
reg = <0x0 0xff9a0000 0x0 0x800>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vepu", "vdpu";
clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
clock-names = "aclk", "hclk";
power-domains = <&power RK3288_PD_VIDEO>;
iommus = <&vpu_mmu>;
};

2
Documentation/devicetree/bindings/net/can/holt_hi311x.txt
View File

@ -17,7 +17,7 @@ Example:
reg = <1>;
clocks = <&clk32m>;
interrupt-parent = <&gpio4>;
interrupts = <13 IRQ_TYPE_EDGE_RISING>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
vdd-supply = <&reg5v0>;
xceiver-supply = <&reg5v0>;
};

28
Documentation/devicetree/bindings/net/can/rcar_can.txt
View File

@ -5,6 +5,7 @@ Required properties:
- compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
"renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC.
"renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
"renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
"renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
"renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
"renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
@ -14,26 +15,32 @@ Required properties:
"renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC.
"renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC.
"renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC.
"renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC.
"renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
"renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
compatible device.
"renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
"renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2
compatible device.
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first
followed by the generic version.
- reg: physical base address and size of the R-Car CAN register map.
- interrupts: interrupt specifier for the sole interrupt.
- clocks: phandles and clock specifiers for 3 CAN clock inputs.
- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2
devices.
phandles and clock specifiers for 3 CAN clock inputs for every other
SoC.
- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
3 clock input name strings for every other SoC: "clkp1", "clkp2",
"can_clk".
- pinctrl-0: pin control group to be used for this controller.
- pinctrl-names: must be "default".
Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796"
compatible:
In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock
and can be used by both CAN and CAN FD controller at the same time. It needs to
be scaled to maximum frequency if any of these controllers use it. This is done
Required properties for R8A7795, R8A7796 and R8A77965:
For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
be used by both CAN and CAN FD controller at the same time. It needs to be
scaled to maximum frequency if any of these controllers use it. This is done
using the below properties:
- assigned-clocks: phandle of clkp2(CANFD) clock.
@ -42,8 +49,9 @@ using the below properties:
Optional properties:
- renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
<0x0> (default) : Peripheral clock (clkp1)
<0x1> : Peripheral clock (clkp2)
<0x3> : Externally input clock
<0x1> : Peripheral clock (clkp2) (not supported by
RZ/G2 devices)
<0x3> : External input clock
Example
-------

2
Documentation/devicetree/bindings/net/dsa/dsa.txt
View File

@ -7,7 +7,7 @@ limitations.
Current Binding
---------------
Switches are true Linux devices and can be probes by any means. Once
Switches are true Linux devices and can be probed by any means. Once
probed, they register to the DSA framework, passing a node
pointer. This node is expected to fulfil the following binding, and
may contain additional properties as required by the device it is

33
Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
View File

@ -40,24 +40,36 @@ Required properties:
"ref" for 19.2 MHz ref clk,
"com_aux" for phy common block aux clock,
"ref_aux" for phy reference aux clock,
For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
For "qcom,msm8996-qmp-pcie-phy" must contain:
"aux", "cfg_ahb", "ref".
For "qcom,msm8996-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref".
For "qcom,qmp-v3-usb3-phy" must contain:
For "qcom,sdm845-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref", "com_aux".
For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
"aux", "cfg_ahb", "ref", "com_aux".
For "qcom,sdm845-qmp-ufs-phy" must contain:
"ref", "ref_aux".
- resets: a list of phandles and reset controller specifier pairs,
one for each entry in reset-names.
- reset-names: "phy" for reset of phy block,
"common" for phy common block reset,
"cfg" for phy's ahb cfg block reset (Optional).
For "qcom,msm8996-qmp-pcie-phy" must contain:
"phy", "common", "cfg".
For "qcom,msm8996-qmp-usb3-phy" must contain
"phy", "common".
"cfg" for phy's ahb cfg block reset.
For "qcom,ipq8074-qmp-pcie-phy" must contain:
"phy", "common".
"phy", "common".
For "qcom,msm8996-qmp-pcie-phy" must contain:
"phy", "common", "cfg".
For "qcom,msm8996-qmp-usb3-phy" must contain
"phy", "common".
For "qcom,sdm845-qmp-usb3-phy" must contain:
"phy", "common".
For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
"phy", "common".
For "qcom,sdm845-qmp-ufs-phy": no resets are listed.
- vdda-phy-supply: Phandle to a regulator supply to PHY core block.
- vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
@ -79,9 +91,10 @@ Required properties for child node:
- #phy-cells: must be 0
Required properties child node of pcie and usb3 qmp phys:
- clocks: a list of phandles and clock-specifier pairs,
one for each entry in clock-names.
- clock-names: Must contain following for pcie and usb qmp phys:
- clock-names: Must contain following:
"pipe<lane-number>" for pipe clock specific to each lane.
- clock-output-names: Name of the PHY clock that will be the parent for
the above pipe clock.
@ -91,9 +104,11 @@ Required properties for child node:
(or)
"pcie20_phy1_pipe_clk"
Required properties for child node of PHYs with lane reset, AKA:
"qcom,msm8996-qmp-pcie-phy"
- resets: a list of phandles and reset controller specifier pairs,
one for each entry in reset-names.
- reset-names: Must contain following for pcie qmp phys:
- reset-names: Must contain following:
"lane<lane-number>" for reset specific to each lane.
Example:

4
Documentation/devicetree/bindings/sound/ak4104.txt
View File

@ -12,8 +12,8 @@ Required properties:
Optional properties:
- reset-gpio : a GPIO spec for the reset pin. If specified, it will be
deasserted before communication to the device starts.
- reset-gpios : a GPIO spec for the reset pin. If specified, it will be
deasserted before communication to the device starts.
Example:

22
Documentation/devicetree/bindings/sound/ak4118.txt Normal file
View File

@ -0,0 +1,22 @@
AK4118 S/PDIF transceiver
This device supports I2C mode.
Required properties:
- compatible : "asahi-kasei,ak4118"
- reg : The I2C address of the device for I2C
- reset-gpios: A GPIO specifier for the reset pin
- irq-gpios: A GPIO specifier for the IRQ pin
Example:
&i2c {
ak4118: ak4118@13 {
#sound-dai-cells = <0>;
compatible = "asahi-kasei,ak4118";
reg = <0x13>;
reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>
irq-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
};

22
Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt Normal file
View File

@ -0,0 +1,22 @@
* Amlogic Audio SPDIF Input
Required properties:
- compatible: 'amlogic,axg-spdifin'
- interrupts: interrupt specifier for the spdif input.
- clocks: list of clock phandle, one for each entry clock-names.
- clock-names: should contain the following:
* "pclk" : peripheral clock.
* "refclk" : spdif input reference clock
- #sound-dai-cells: must be 0.
Example on the A113 SoC:
spdifin: audio-controller@400 {
compatible = "amlogic,axg-spdifin";
reg = <0x0 0x400 0x0 0x30>;
#sound-dai-cells = <0>;
interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
<&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
clock-names = "pclk", "refclk";
};

205
Documentation/devicetree/bindings/sound/audio-graph-card.txt
View File

@ -32,7 +32,9 @@ Required properties:
Optional properties:
- pa-gpios: GPIO used to control external amplifier.
-----------------------
Example: Single DAI case
-----------------------
sound_card {
compatible = "audio-graph-card";
@ -61,7 +63,9 @@ Example: Single DAI case
};
};
-----------------------
Example: Multi DAI case
-----------------------
sound-card {
compatible = "audio-graph-card";
@ -130,3 +134,204 @@ Example: Multi DAI case
};
};
-----------------------
Example: Sampling Rate Conversion
-----------------------
sound_card {
compatible = "audio-graph-card";
label = "sound-card";
prefix = "codec";
routing = "codec Playback", "DAI0 Playback",
"DAI0 Capture", "codec Capture";
convert-rate = <48000>;
dais = <&cpu_port>;
};
audio-codec {
...
port {
codec_endpoint: endpoint {
remote-endpoint = <&cpu_endpoint>;
};
};
};
dai-controller {
...
cpu_port: port {
cpu_endpoint: endpoint {
remote-endpoint = <&codec_endpoint>;
dai-format = "left_j";
...
};
};
};
-----------------------
Example: 2 CPU 1 Codec (Mixing)
-----------------------
sound_card {
compatible = "audio-graph-card";
label = "sound-card";
routing = "codec Playback", "DAI0 Playback",
"codec Playback", "DAI1 Playback",
"DAI0 Capture", "codec Capture";
dais = <&cpu_port>;
};
audio-codec {
...
audio-graph-card,prefix = "codec";
audio-graph-card,convert-rate = <48000>;
port {
reg = <0>;
codec_endpoint0: endpoint@0 {
remote-endpoint = <&cpu_endpoint0>;
};
codec_endpoint1: endpoint@1 {
remote-endpoint = <&cpu_endpoint1>;
};
};
};
dai-controller {
...
cpu_port: port {
cpu_endpoint0: endpoint@0 {
remote-endpoint = <&codec_endpoint0>;
dai-format = "left_j";
...
};
cpu_endpoint1: endpoint@1 {
remote-endpoint = <&codec_endpoint1>;
dai-format = "left_j";
...
};
};
};
-----------------------
Example: Multi DAI with DPCM
-----------------------
CPU0 ------ ak4613
CPU1 ------ HDMI
CPU2 ------ PCM3168A-p /* DPCM 1ch/2ch */
CPU3 --/ /* DPCM 3ch/4ch */
CPU4 --/ /* DPCM 5ch/6ch */
CPU5 --/ /* DPCM 7ch/8ch */
CPU6 ------ PCM3168A-c
sound_card: sound {
compatible = "audio-graph-card";
label = "sound-card";
routing = "pcm3168a Playback", "DAI2 Playback",
"pcm3168a Playback", "DAI3 Playback",
"pcm3168a Playback", "DAI4 Playback",
"pcm3168a Playback", "DAI5 Playback";
dais = <&snd_port0 /* ak4613 */
&snd_port1 /* HDMI0 */
&snd_port2 /* pcm3168a playback */
&snd_port3 /* pcm3168a capture */
>;
};
ak4613: codec@10 {
...
port {
ak4613_endpoint: endpoint {
remote-endpoint = <&rsnd_endpoint0>;
};
};
};
pcm3168a: audio-codec@44 {
...
audio-graph-card,prefix = "pcm3168a";
audio-graph-card,convert-channels = <8>; /* TDM Split */
ports {
port@0 {
reg = <0>;
pcm3168a_endpoint_p1: endpoint@1 {
remote-endpoint = <&rsnd_endpoint2>;
...
};
pcm3168a_endpoint_p2: endpoint@2 {
remote-endpoint = <&rsnd_endpoint3>;
...
};
pcm3168a_endpoint_p3: endpoint@3 {
remote-endpoint = <&rsnd_endpoint4>;
...
};
pcm3168a_endpoint_p4: endpoint@4 {
remote-endpoint = <&rsnd_endpoint5>;
...
};
};
port@1 {
reg = <1>;
pcm3168a_endpoint_c: endpoint {
remote-endpoint = <&rsnd_endpoint6>;
...
};
};
};
};
&sound {
ports {
snd_port0: port@0 {
rsnd_endpoint0: endpoint {
remote-endpoint = <&ak4613_endpoint>;
...
};
};
snd_port1: port@1 {
rsnd_endpoint1: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
...
};
};
snd_port2: port@2 {
#address-cells = <1>;
#size-cells = <0>;
rsnd_endpoint2: endpoint@2 {
remote-endpoint = <&pcm3168a_endpoint_p1>;
...
};
rsnd_endpoint3: endpoint@3 {
remote-endpoint = <&pcm3168a_endpoint_p2>;
...
};
rsnd_endpoint4: endpoint@4 {
remote-endpoint = <&pcm3168a_endpoint_p3>;
...
};
rsnd_endpoint5: endpoint@5 {
remote-endpoint = <&pcm3168a_endpoint_p4>;
...
};
};
snd_port3: port@6 {
rsnd_endpoint6: endpoint {
remote-endpoint = <&pcm3168a_endpoint_c>;
...
};
};
};
};

4
Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt
View File

@ -77,11 +77,9 @@ Example 2. 2 CPU 1 Codec (Mixing)
compatible = "audio-graph-scu-card";
label = "sound-card";
prefix = "codec";
routing = "codec Playback", "DAI0 Playback",
"codec Playback", "DAI1 Playback",
"DAI0 Capture", "codec Capture";
convert-rate = <48000>;
dais = <&cpu_port0
&cpu_port1>;
@ -90,6 +88,8 @@ Example 2. 2 CPU 1 Codec (Mixing)
audio-codec {
...
audio-graph-card,prefix = "codec";
audio-graph-card,convert-rate = <48000>;
port {
codec_endpoint0: endpoint {
remote-endpoint = <&cpu_endpoint0>;

4
Documentation/devicetree/bindings/sound/cs4270.txt
View File

@ -10,8 +10,8 @@ Required properties:
Optional properties:
- reset-gpio : a GPIO spec for the reset pin. If specified, it will be
deasserted before communication to the codec starts.
- reset-gpios : a GPIO spec for the reset pin. If specified, it will be
deasserted before communication to the codec starts.
Example:

5
Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
View File

@ -30,6 +30,11 @@ Optional properties:
- ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0
- tx-num-evt : FIFO levels.
- rx-num-evt : FIFO levels.
- dismod : Specify the drive on TX pin during inactive slots
0 : 3-state
2 : logic low
3 : logic high
Defaults to 'logic low' when the property is not present
- sram-size-playback : size of sram to be allocated during playback
- sram-size-capture : size of sram to be allocated during capture
- interrupts : Interrupt numbers for McASP

2
Documentation/devicetree/bindings/sound/dmic.txt
View File

@ -9,6 +9,7 @@ Optional properties:
- dmicen-gpios: GPIO specifier for dmic to control start and stop
- num-channels: Number of microphones on this DAI
- wakeup-delay-ms: Delay (in ms) after enabling the DMIC
- modeswitch-delay-ms: Delay (in ms) to complete DMIC mode switch
Example node:
@ -17,4 +18,5 @@ Example node:
dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
num-channels = <1>;
wakeup-delay-ms <50>;
modeswitch-delay-ms <35>;
};

8
Documentation/devicetree/bindings/sound/fsl-sai.txt
View File

@ -35,13 +35,13 @@ Required properties:
- fsl,sai-synchronous-rx: This is a boolean property. If present, indicating
that SAI will work in the synchronous mode (sync Tx
with Rx) which means both the transimitter and the
with Rx) which means both the transmitter and the
receiver will send and receive data by following
receiver's bit clocks and frame sync clocks.
- fsl,sai-asynchronous: This is a boolean property. If present, indicating
that SAI will work in the asynchronous mode, which
means both transimitter and receiver will send and
means both transmitter and receiver will send and
receive data by following their own bit clocks and
frame sync clocks separately.
@ -58,8 +58,8 @@ Optional properties (for mx6ul):
Note:
- If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
default synchronous mode (sync Rx with Tx) will be used, which means both
transimitter and receiver will send and receive data by following clocks
of transimitter.
transmitter and receiver will send and receive data by following clocks
of transmitter.
- fsl,sai-asynchronous and fsl,sai-synchronous-rx are exclusive.
Example:

10
Documentation/devicetree/bindings/sound/omap-mcpdm.txt
View File

@ -7,6 +7,8 @@ Required properties:
<L3 interconnect address, size>;
- interrupts: Interrupt number for McPDM
- ti,hwmods: Name of the hwmod associated to the McPDM
- clocks: phandle for the pdmclk provider, likely <&twl6040>
- clock-names: Must be "pdmclk"
Example:
@ -18,3 +20,11 @@ mcpdm: mcpdm@40132000 {
interrupt-parent = <&gic>;
ti,hwmods = "mcpdm";
};
In board DTS file the pdmclk needs to be added:
&mcpdm {
clocks = <&twl6040>;
clock-names = "pdmclk";
status = "okay";
};

6
Documentation/devicetree/bindings/sound/pcm3060.txt
View File

@ -9,9 +9,15 @@ Required properties:
- reg : the I2C address of the device for I2C, the chip select
number for SPI.
Optional properties:
- ti,out-single-ended: "true" if output is single-ended;
"false" or not specified if output is differential.
Examples:
pcm3060: pcm3060@46 {
compatible = "ti,pcm3060";
reg = <0x46>;
ti,out-single-ended = "true";
};

27
Documentation/devicetree/bindings/sound/qcom,q6asm.txt
View File

@ -27,6 +27,28 @@ used by the apr service device.
Value type: <u32>
Definition: Must be 1
== ASM DAI is subnode of "dais" and represent a dai, it includes board specific
configuration of each dai. Must contain the following properties.
- reg
Usage: required
Value type: <u32>
Definition: Must be dai id
- direction:
Usage: Required for Compress offload dais
Value type: <u32>
Definition: Specifies the direction of the dai stream
0 for both tx and rx
1 for only tx (Capture/Encode)
2 for only rx (Playback/Decode)
- is-compress-dai:
Usage: Required for Compress offload dais
Value type: <boolean>
Definition: present for Compress offload dais
= EXAMPLE
q6asm@7 {
@ -35,5 +57,10 @@ q6asm@7 {
q6asmdai: dais {
compatible = "qcom,q6asm-dais";
#sound-dai-cells = <1>;
mm@0 {
reg = <0>;
direction = <2>;
is-compress-dai;
};
};
};

397
Documentation/devicetree/bindings/sound/renesas,rsnd.txt
View File

@ -39,15 +39,7 @@ This is example of
Playback: [MEM] -> [SRC2] -> [DVC0] -> [SSIU0/SSI0] -> [codec]
Capture: [MEM] <- [DVC1] <- [SRC3] <- [SSIU1/SSI1] <- [codec]
&rcar_sound {
...
rcar_sound,dai {
dai0 {
playback = <&ssi0 &src2 &dvc0>;
capture = <&ssi1 &src3 &dvc1>;
};
};
};
see "Example: simple sound card"
You can use below.
${LINUX}/arch/arm/boot/dts/r8a7790.dts can be good example.
@ -83,29 +75,8 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes
** Asynchronous mode
------------------
You need to use "simple-scu-audio-card" sound card for it.
example)
sound {
compatible = "simple-scu-audio-card";
...
/*
* SRC Asynchronous mode setting
* Playback:
* All input data will be converted to 48kHz
* Capture:
* Inputed 48kHz data will be converted to
* system specified Hz
*/
simple-audio-card,convert-rate = <48000>;
...
simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
simple-audio-card,codec {
...
};
};
You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it.
see "Example: simple sound card for Asynchronous mode"
------------------
** Synchronous mode
@ -141,26 +112,8 @@ For more detail information, see below
${LINUX}/sound/soc/sh/rcar/ctu.c
- comment of header
You need to use "simple-scu-audio-card" sound card for it.
example)
sound {
compatible = "simple-scu-audio-card";
...
/*
* CTU setting
* All input data will be converted to 2ch
* as output data
*/
simple-audio-card,convert-channels = <2>;
...
simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
simple-audio-card,codec {
...
};
};
You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it.
see "Example: simple sound card for channel convert"
Ex) Exchange output channel
Input -> Output
@ -190,42 +143,13 @@ and these sounds will be merged by MIX.
aplay -D plughw:0,0 xxxx.wav &
aplay -D plughw:0,1 yyyy.wav
You need to use "simple-scu-audio-card" sound card for it.
You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it.
Ex)
[MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0]
|
[MEM] -> [SRC2] -> [CTU03] -+
sound {
#address-cells = <1>;
#size-cells = <0>;
compatible = "simple-scu-audio-card";
...
simple-audio-card,cpu@0 {
reg = <0>;
sound-dai = <&rcar_sound 0>;
};
simple-audio-card,cpu@1 {
reg = <1>;
sound-dai = <&rcar_sound 1>;
};
simple-audio-card,codec {
...
};
};
&rcar_sound {
...
rcar_sound,dai {
dai0 {
playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
};
dai1 {
playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
};
};
};
see "Example: simple sound card for MIXer"
=============================================
* DVC (Digital Volume and Mute Function)
@ -257,15 +181,31 @@ Volume Ramp
* SSIU (Serial Sound Interface Unit)
=============================================
There is no DT settings for SSIU, because SSIU will be automatically
selected via SSI.
SSIU can avoid some under/over run error, because it has some buffer.
But you can't use it if SSI was PIO mode.
In DMA mode, you can select not to use SSIU by using "no-busif" on DT.
In DMA mode, you can select not to use SSIU by using "no-busif" via SSI.
&ssi0 {
no-busif;
};
SSIU handles BUSIF which will be used for TDM Split mode.
This driver is assuming that audio-graph card will be used.
TDM Split mode merges 4 sounds. You can see 4 sound interface on system,
and these sounds will be merged SSIU/SSI.
aplay -D plughw:0,0 xxxx.wav &
aplay -D plughw:0,1 xxxx.wav &
aplay -D plughw:0,2 xxxx.wav &
aplay -D plughw:0,3 xxxx.wav
2ch 8ch
[MEM] -> [SSIU 30] -+-> [SSIU 3] --> [Codec]
2ch |
[MEM] -> [SSIU 31] -+
2ch |
[MEM] -> [SSIU 32] -+
2ch |
[MEM] -> [SSIU 33] -+
see "Example: simple sound card for TDM Split"
=============================================
* SSI (Serial Sound Interface)
@ -304,14 +244,7 @@ This is example if SSI1 want to share WS pin with SSI0
You can use Multi-SSI.
This is example of SSI0/SSI1/SSI2 (= for 6ch)
&rcar_sound {
...
rcar_sound,dai {
dai0 {
playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>;
};
};
};
see "Example: simple sound card for Multi channel"
** TDM-SSI
@ -319,19 +252,7 @@ You can use TDM with SSI.
This is example of TDM 6ch.
Driver can automatically switches TDM <-> stereo mode in this case.
rsnd_tdm: sound {
compatible = "simple-audio-card";
...
simple-audio-card,cpu {
/* system can use TDM 6ch */
dai-tdm-slot-num = <6>;
sound-dai = <&rcar_sound>;
};
simple-audio-card,codec {
...
};
};
see "Example: simple sound card for TDM"
=============================================
Required properties:
@ -346,6 +267,7 @@ Required properties:
- "renesas,rcar_sound-r8a7744" (RZ/G1N)
- "renesas,rcar_sound-r8a7745" (RZ/G1E)
- "renesas,rcar_sound-r8a774a1" (RZ/G2M)
- "renesas,rcar_sound-r8a774c0" (RZ/G2E)
- "renesas,rcar_sound-r8a7778" (R-Car M1A)
- "renesas,rcar_sound-r8a7779" (R-Car H1)
- "renesas,rcar_sound-r8a7790" (R-Car H2)
@ -356,6 +278,7 @@ Required properties:
- "renesas,rcar_sound-r8a7796" (R-Car M3-W)
- "renesas,rcar_sound-r8a77965" (R-Car M3-N)
- "renesas,rcar_sound-r8a77990" (R-Car E3)
- "renesas,rcar_sound-r8a77995" (R-Car D3)
- reg : Should contain the register physical address.
required register is
SRU/ADG/SSI if generation1
@ -363,6 +286,9 @@ Required properties:
- rcar_sound,ssi : Should contain SSI feature.
The number of SSI subnode should be same as HW.
see below for detail.
- rcar_sound,ssiu : Should contain SSIU feature.
The number of SSIU subnode should be same as HW.
see below for detail.
- rcar_sound,src : Should contain SRC feature.
The number of SRC subnode should be same as HW.
see below for detail.
@ -402,8 +328,13 @@ SSI subnode properties:
- no-busif : BUSIF is not ussed when [mem -> SSI] via DMA case
- dma : Should contain Audio DMAC entry
- dma-names : SSI case "rx" (=playback), "tx" (=capture)
Deprecated: see SSIU subnode properties
SSIU case "rxu" (=playback), "txu" (=capture)
SSIU subnode properties:
- dma : Should contain Audio DMAC entry
- dma-names : "rx" (=playback), "tx" (=capture)
SRC subnode properties:
- dma : Should contain Audio DMAC entry
- dma-names : "rx" (=playback), "tx" (=capture)
@ -532,56 +463,55 @@ rcar_sound: sound@ec500000 {
};
};
rcar_sound,ssiu {
ssiu00: ssiu-0 {
dmas = <&audma0 0x15>, <&audma1 0x16>;
dma-names = "rx", "tx";
};
ssiu01: ssiu-1 {
dmas = <&audma0 0x35>, <&audma1 0x36>;
dma-names = "rx", "tx";
};
...
ssiu95: ssiu-49 {
dmas = <&audma0 0xA5>, <&audma1 0xA6>;
dma-names = "rx", "tx";
};
ssiu96: ssiu-50 {
dmas = <&audma0 0xA7>, <&audma1 0xA8>;
dma-names = "rx", "tx";
};
ssiu97: ssiu-51 {
dmas = <&audma0 0xA9>, <&audma1 0xAA>;
dma-names = "rx", "tx";
};
};
rcar_sound,ssi {
ssi0: ssi-0 {
interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
dma-names = "rx", "tx", "rxu", "txu";
dmas = <&audma0 0x01>, <&audma1 0x02>;
dma-names = "rx", "tx";
};
ssi1: ssi-1 {
interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi2: ssi-2 {
interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi3: ssi-3 {
interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi4: ssi-4 {
interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi5: ssi-5 {
interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi6: ssi-6 {
interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi7: ssi-7 {
interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
dma-names = "rx", "tx", "rxu", "txu";
dmas = <&audma0 0x03>, <&audma1 0x04>;
dma-names = "rx", "tx";
};
...
ssi8: ssi-8 {
interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
dma-names = "rx", "tx", "rxu", "txu";
dmas = <&audma0 0x11>, <&audma1 0x12>;
dma-names = "rx", "tx";
};
ssi9: ssi-9 {
interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
dma-names = "rx", "tx", "rxu", "txu";
dmas = <&audma0 0x13>, <&audma1 0x14>;
dma-names = "rx", "tx";
};
};
@ -646,26 +576,175 @@ Example: simple sound card
shared-pin;
};
=============================================
Example: simple sound card for Asynchronous mode
=============================================
sound {
compatible = "simple-scu-audio-card";
...
/*
* SRC Asynchronous mode setting
* Playback:
* All input data will be converted to 48kHz
* Capture:
* Inputed 48kHz data will be converted to
* system specified Hz
*/
simple-audio-card,convert-rate = <48000>;
...
simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
simple-audio-card,codec {
...
};
};
=============================================
Example: simple sound card for channel convert
=============================================
sound {
compatible = "simple-scu-audio-card";
...
/*
* CTU setting
* All input data will be converted to 2ch
* as output data
*/
simple-audio-card,convert-channels = <2>;
...
simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
simple-audio-card,codec {
...
};
};
=============================================
Example: simple sound card for MIXer
=============================================
sound {
compatible = "simple-scu-audio-card";
...
simple-audio-card,cpu@0 {
sound-dai = <&rcar_sound 0>;
};
simple-audio-card,cpu@1 {
sound-dai = <&rcar_sound 1>;
};
simple-audio-card,codec {
...
};
};
&rcar_sound {
...
rcar_sound,dai {
dai0 {
playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
};
dai1 {
playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
};
};
};
=============================================
Example: simple sound card for TDM
=============================================
rsnd_tdm: sound {
compatible = "simple-audio-card";
rsnd_tdm: sound {
compatible = "simple-audio-card";
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&sndcodec>;
simple-audio-card,frame-master = <&sndcodec>;
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&sndcodec>;
simple-audio-card,frame-master = <&sndcodec>;
sndcpu: simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
dai-tdm-slot-num = <6>;
sndcpu: simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
dai-tdm-slot-num = <6>;
};
sndcodec: simple-audio-card,codec {
sound-dai = <&xxx>;
};
};
=============================================
Example: simple sound card for TDM Split
=============================================
sound_card: sound {
compatible = "audio-graph-scu-card";
prefix = "xxxx";
routing = "xxxx Playback", "DAI0 Playback",
"xxxx Playback", "DAI1 Playback",
"xxxx Playback", "DAI2 Playback",
"xxxx Playback", "DAI3 Playback";
convert-channels = <8>; /* TDM Split */
dais = <&rsnd_port0 /* playback ch1/ch2 */
&rsnd_port1 /* playback ch3/ch4 */
&rsnd_port2 /* playback ch5/ch6 */
&rsnd_port3 /* playback ch7/ch8 */
>;
};
audio-codec {
...
port {
codec_0: endpoint@1 {
remote-endpoint = <&rsnd_ep0>;
};
sndcodec: simple-audio-card,codec {
sound-dai = <&xxx>;
codec_1: endpoint@2 {
remote-endpoint = <&rsnd_ep1>;
};
codec_2: endpoint@3 {
remote-endpoint = <&rsnd_ep2>;
};
codec_3: endpoint@4 {
remote-endpoint = <&rsnd_ep3>;
};
};
};
&rcar_sound {
...
ports {
rsnd_port0: port@0 {
rsnd_ep0: endpoint {
remote-endpoint = <&codec_0>;
...
playback = <&ssiu30 &ssi3>;
};
};
rsnd_port1: port@1 {
rsnd_ep1: endpoint {
remote-endpoint = <&codec_1>;
...
playback = <&ssiu31 &ssi3>;
};
};
rsnd_port2: port@2 {
rsnd_ep2: endpoint {
remote-endpoint = <&codec_2>;
...
playback = <&ssiu32 &ssi3>;
};
};
rsnd_port3: port@3 {
rsnd_ep3: endpoint {
remote-endpoint = <&codec_3>;
...
playback = <&ssiu33 &ssi3>;
};
};
};
};
=============================================
Example: simple sound card for Multi channel

4
Documentation/devicetree/bindings/sound/rt5631.txt
View File

@ -35,14 +35,14 @@ Pins on the device (for linking into audio routes):
Example:
alc5631: alc5631@1a {
alc5631: audio-codec@1a {
compatible = "realtek,alc5631";
reg = <0x1a>;
};
or
rt5631: rt5631@1a {
rt5631: audio-codec@1a {
compatible = "realtek,rt5631";
reg = <0x1a>;
};

6
Documentation/devicetree/bindings/sound/rt5663.txt
View File

@ -10,6 +10,10 @@ Required properties:
- interrupts : The CODEC's interrupt output.
- avdd-supply: Power supply for AVDD, providing 1.8V.
- cpvdd-supply: Power supply for CPVDD, providing 3.5V.
Optional properties:
- "realtek,dc_offset_l_manual"
@ -51,4 +55,6 @@ rt5663: codec@12 {
compatible = "realtek,rt5663";
reg = <0x12>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
avdd-supply = <&pp1800_a_alc5662>;
cpvdd-supply = <&pp3500_a_alc5662>;
};

5
Documentation/devicetree/bindings/sound/simple-amplifier.txt
View File

@ -4,9 +4,14 @@ Required properties:
- compatible : "dioo,dio2125" or "simple-audio-amplifier"
- enable-gpios : the gpio connected to the enable pin of the simple amplifier
Optional properties:
- VCC-supply : power supply for the device, as covered
in Documentation/devicetree/bindings/regulator/regulator.txt
Example:
amp: analog-amplifier {
compatible = "simple-audio-amplifier";
VCC-supply = <&regulator>;
enable-gpios = <&gpio GPIOH_3 0>;
};

137
Documentation/devicetree/bindings/sound/simple-card.txt
View File

@ -95,7 +95,9 @@ Optional CPU/CODEC subnodes properties:
initialization. It is useful for some aCPUs with
fixed clocks.
-------------------------------------------
Example 1 - single DAI link:
-------------------------------------------
sound {
compatible = "simple-audio-card";
@ -138,7 +140,9 @@ sh_fsi2: sh_fsi2@ec230000 {
interrupts = <0 146 0x4>;
};
-------------------------------------------
Example 2 - many DAI links:
-------------------------------------------
sound {
compatible = "simple-audio-card";
@ -176,8 +180,10 @@ sound {
};
};
-------------------------------------------
Example 3 - route audio from IMX6 SSI2 through TLV320DAC3100 codec
through TPA6130A2 amplifier to headphones:
-------------------------------------------
&i2c0 {
codec: tlv320dac3100@18 {
@ -210,3 +216,134 @@ sound {
clocks = ...
};
};
-------------------------------------------
Example 4. Sampling Rate Conversion
-------------------------------------------
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "rsnd-ak4643";
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&sndcodec>;
simple-audio-card,frame-master = <&sndcodec>;
simple-audio-card,convert-rate = <48000>;
simple-audio-card,prefix = "ak4642";
simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
"DAI0 Capture", "ak4642 Capture";
sndcpu: simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
sndcodec: simple-audio-card,codec {
sound-dai = <&ak4643>;
system-clock-frequency = <11289600>;
};
};
-------------------------------------------
Example 5. 2 CPU 1 Codec (Mixing)
-------------------------------------------
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "rsnd-ak4643";
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&dpcmcpu>;
simple-audio-card,frame-master = <&dpcmcpu>;
simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
"ak4642 Playback", "DAI1 Playback";
dpcmcpu: cpu@0 {
sound-dai = <&rcar_sound 0>;
};
cpu@1 {
sound-dai = <&rcar_sound 1>;
};
codec {
prefix = "ak4642";
sound-dai = <&ak4643>;
clocks = <&audio_clock>;
};
};
-------------------------------------------
Example 6 - many DAI links with DPCM:
-------------------------------------------
CPU0 ------ ak4613
CPU1 ------ PCM3168A-p /* DPCM 1ch/2ch */
CPU2 --/ /* DPCM 3ch/4ch */
CPU3 --/ /* DPCM 5ch/6ch */
CPU4 --/ /* DPCM 7ch/8ch */
CPU5 ------ PCM3168A-c
sound {
compatible = "simple-audio-card";
simple-audio-card,routing =
"pcm3168a Playback", "DAI1 Playback",
"pcm3168a Playback", "DAI2 Playback",
"pcm3168a Playback", "DAI3 Playback",
"pcm3168a Playback", "DAI4 Playback";
simple-audio-card,dai-link@0 {
format = "left_j";
bitclock-master = <&sndcpu0>;
frame-master = <&sndcpu0>;
sndcpu0: cpu {
sound-dai = <&rcar_sound 0>;
};
codec {
sound-dai = <&ak4613>;
};
};
simple-audio-card,dai-link@1 {
format = "i2s";
bitclock-master = <&sndcpu1>;
frame-master = <&sndcpu1>;
convert-channels = <8>; /* TDM Split */
sndcpu1: cpu@0 {
sound-dai = <&rcar_sound 1>;
};
cpu@1 {
sound-dai = <&rcar_sound 2>;
};
cpu@2 {
sound-dai = <&rcar_sound 3>;
};
cpu@3 {
sound-dai = <&rcar_sound 4>;
};
codec {
mclk-fs = <512>;
prefix = "pcm3168a";
dai-tdm-slot-num = <8>;
sound-dai = <&pcm3168a 0>;
};
};
simple-audio-card,dai-link@2 {
format = "i2s";
bitclock-master = <&sndcpu2>;
frame-master = <&sndcpu2>;
sndcpu2: cpu {
sound-dai = <&rcar_sound 5>;
};
codec {
mclk-fs = <512>;
prefix = "pcm3168a";
sound-dai = <&pcm3168a 1>;
};
};
};

2
Documentation/devicetree/bindings/sound/simple-scu-card.txt
View File

@ -75,7 +75,6 @@ sound {
simple-audio-card,bitclock-master = <&dpcmcpu>;
simple-audio-card,frame-master = <&dpcmcpu>;
simple-audio-card,prefix = "ak4642";
simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
"ak4642 Playback", "DAI1 Playback";
@ -88,6 +87,7 @@ sound {
};
codec {
prefix = "ak4642";
sound-dai = <&ak4643>;
clocks = <&audio_clock>;
};

2
Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt
View File

@ -4,9 +4,11 @@ Required properties:
- compatible: must be one of the following compatibles:
- "allwinner,sun50i-a64-codec-analog"
- reg: must contain the registers location and length
- cpvdd-supply: Regulator supply for the headphone amplifier
Example:
codec_analog: codec-analog@1f015c0 {
compatible = "allwinner,sun50i-a64-codec-analog";
reg = <0x01f015c0 0x4>;
cpvdd-supply = <&reg_eldo1>;
};

28
Documentation/devicetree/bindings/sound/xlnx,i2s.txt Normal file
View File

@ -0,0 +1,28 @@
Device-Tree bindings for Xilinx I2S PL block
The IP supports I2S based playback/capture audio
Required property:
- compatible: "xlnx,i2s-transmitter-1.0" for playback and
"xlnx,i2s-receiver-1.0" for capture
Required property common to both I2S playback and capture:
- reg: Base address and size of the IP core instance.
- xlnx,dwidth: sample data width. Can be any of 16, 24.
- xlnx,num-channels: Number of I2S streams. Can be any of 1, 2, 3, 4.
supported channels = 2 * xlnx,num-channels
Example:
i2s_receiver@a0080000 {
compatible = "xlnx,i2s-receiver-1.0";
reg = <0x0 0xa0080000 0x0 0x10000>;
xlnx,dwidth = <0x18>;
xlnx,num-channels = <1>;
};
i2s_transmitter@a0090000 {
compatible = "xlnx,i2s-transmitter-1.0";
reg = <0x0 0xa0090000 0x0 0x10000>;
xlnx,dwidth = <0x18>;
xlnx,num-channels = <1>;
};

14
Documentation/devicetree/bindings/spi/spi-uniphier.txt
View File

@ -5,18 +5,20 @@ UniPhier SoCs have SCSSI which supports SPI single channel.
Required properties:
- compatible: should be "socionext,uniphier-scssi"
- reg: address and length of the spi master registers
- #address-cells: must be <1>, see spi-bus.txt
- #size-cells: must be <0>, see spi-bus.txt
- clocks: A phandle to the clock for the device.
- resets: A phandle to the reset control for the device.
- interrupts: a single interrupt specifier
- pinctrl-names: should be "default"
- pinctrl-0: pin control state for the default mode
- clocks: a phandle to the clock for the device
- resets: a phandle to the reset control for the device
Example:
spi0: spi@54006000 {
compatible = "socionext,uniphier-scssi";
reg = <0x54006000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 39 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
clocks = <&peri_clk 11>;
resets = <&peri_rst 11>;
};

11
Documentation/input/event-codes.rst
View File

@ -190,16 +190,7 @@ A few EV_REL codes have special meanings:
* REL_WHEEL, REL_HWHEEL:
- These codes are used for vertical and horizontal scroll wheels,
respectively. The value is the number of "notches" moved on the wheel, the
physical size of which varies by device. For high-resolution wheels (which
report multiple events for each notch of movement, or do not have notches)
this may be an approximation based on the high-resolution scroll events.
* REL_WHEEL_HI_RES:
- If a vertical scroll wheel supports high-resolution scrolling, this code
will be emitted in addition to REL_WHEEL. The value is the (approximate)
distance travelled by the user's finger, in microns.
respectively.
EV_ABS
------

26
Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst
View File

@ -1,4 +1,28 @@
.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
.. This file is dual-licensed: you can use it either under the terms
.. of the GPL or the GFDL 1.1+ license, at your option. Note that this
.. dual licensing only applies to this file, and not this project as a
.. whole.
..
.. a) This file is free software; you can redistribute it and/or
.. modify it under the terms of the GNU General Public License as
.. published by the Free Software Foundation; either version 2 of
.. the License, or (at your option) any later version.
..
.. This file is distributed in the hope that it will be useful,
.. but WITHOUT ANY WARRANTY; without even the implied warranty of
.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
.. GNU General Public License for more details.
..
.. Or, alternatively,
..
.. b) Permission is granted to copy, distribute and/or modify this
.. document under the terms of the GNU Free Documentation License,
.. Version 1.1 or any later version published by the Free Software
.. Foundation, with no Invariant Sections, no Front-Cover Texts
.. and no Back-Cover Texts. A copy of the license is included at
.. Documentation/media/uapi/fdl-appendix.rst.
..
.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
.. _media_ioc_request_alloc:

26
Documentation/media/uapi/mediactl/media-request-ioc-queue.rst
View File

@ -1,4 +1,28 @@
.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
.. This file is dual-licensed: you can use it either under the terms
.. of the GPL or the GFDL 1.1+ license, at your option. Note that this
.. dual licensing only applies to this file, and not this project as a
.. whole.
..
.. a) This file is free software; you can redistribute it and/or
.. modify it under the terms of the GNU General Public License as
.. published by the Free Software Foundation; either version 2 of
.. the License, or (at your option) any later version.
..
.. This file is distributed in the hope that it will be useful,
.. but WITHOUT ANY WARRANTY; without even the implied warranty of
.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
.. GNU General Public License for more details.
..
.. Or, alternatively,
..
.. b) Permission is granted to copy, distribute and/or modify this
.. document under the terms of the GNU Free Documentation License,
.. Version 1.1 or any later version published by the Free Software
.. Foundation, with no Invariant Sections, no Front-Cover Texts
.. and no Back-Cover Texts. A copy of the license is included at
.. Documentation/media/uapi/fdl-appendix.rst.
..
.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
.. _media_request_ioc_queue:

26
Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst
View File

@ -1,4 +1,28 @@
.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
.. This file is dual-licensed: you can use it either under the terms
.. of the GPL or the GFDL 1.1+ license, at your option. Note that this
.. dual licensing only applies to this file, and not this project as a
.. whole.
..
.. a) This file is free software; you can redistribute it and/or
.. modify it under the terms of the GNU General Public License as
.. published by the Free Software Foundation; either version 2 of
.. the License, or (at your option) any later version.
..
.. This file is distributed in the hope that it will be useful,
.. but WITHOUT ANY WARRANTY; without even the implied warranty of
.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
.. GNU General Public License for more details.
..
.. Or, alternatively,
..
.. b) Permission is granted to copy, distribute and/or modify this
.. document under the terms of the GNU Free Documentation License,
.. Version 1.1 or any later version published by the Free Software
.. Foundation, with no Invariant Sections, no Front-Cover Texts
.. and no Back-Cover Texts. A copy of the license is included at
.. Documentation/media/uapi/fdl-appendix.rst.
..
.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
.. _media_request_ioc_reinit:

26
Documentation/media/uapi/mediactl/request-api.rst
View File

@ -1,4 +1,28 @@
.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
.. This file is dual-licensed: you can use it either under the terms
.. of the GPL or the GFDL 1.1+ license, at your option. Note that this
.. dual licensing only applies to this file, and not this project as a
.. whole.
..
.. a) This file is free software; you can redistribute it and/or
.. modify it under the terms of the GNU General Public License as
.. published by the Free Software Foundation; either version 2 of
.. the License, or (at your option) any later version.
..
.. This file is distributed in the hope that it will be useful,
.. but WITHOUT ANY WARRANTY; without even the implied warranty of
.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
.. GNU General Public License for more details.
..
.. Or, alternatively,
..
.. b) Permission is granted to copy, distribute and/or modify this
.. document under the terms of the GNU Free Documentation License,
.. Version 1.1 or any later version published by the Free Software
.. Foundation, with no Invariant Sections, no Front-Cover Texts
.. and no Back-Cover Texts. A copy of the license is included at
.. Documentation/media/uapi/fdl-appendix.rst.
..
.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
.. _media-request-api:

26
Documentation/media/uapi/mediactl/request-func-close.rst
View File

@ -1,4 +1,28 @@
.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
.. This file is dual-licensed: you can use it either under the terms
.. of the GPL or the GFDL 1.1+ license, at your option. Note that this
.. dual licensing only applies to this file, and not this project as a
.. whole.
..
.. a) This file is free software; you can redistribute it and/or
.. modify it under the terms of the GNU General Public License as
.. published by the Free Software Foundation; either version 2 of
.. the License, or (at your option) any later version.
..
.. This file is distributed in the hope that it will be useful,
.. but WITHOUT ANY WARRANTY; without even the implied warranty of
.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
.. GNU General Public License for more details.
..
.. Or, alternatively,
..
.. b) Permission is granted to copy, distribute and/or modify this
.. document under the terms of the GNU Free Documentation License,
.. Version 1.1 or any later version published by the Free Software
.. Foundation, with no Invariant Sections, no Front-Cover Texts
.. and no Back-Cover Texts. A copy of the license is included at
.. Documentation/media/uapi/fdl-appendix.rst.
..
.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
.. _request-func-close:

26
Documentation/media/uapi/mediactl/request-func-ioctl.rst
View File

@ -1,4 +1,28 @@
.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
.. This file is dual-licensed: you can use it either under the terms
.. of the GPL or the GFDL 1.1+ license, at your option. Note that this
.. dual licensing only applies to this file, and not this project as a
.. whole.
..
.. a) This file is free software; you can redistribute it and/or
.. modify it under the terms of the GNU General Public License as
.. published by the Free Software Foundation; either version 2 of
.. the License, or (at your option) any later version.
..
.. This file is distributed in the hope that it will be useful,
.. but WITHOUT ANY WARRANTY; without even the implied warranty of
.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
.. GNU General Public License for more details.
..
.. Or, alternatively,
..
.. b) Permission is granted to copy, distribute and/or modify this
.. document under the terms of the GNU Free Documentation License,
.. Version 1.1 or any later version published by the Free Software
.. Foundation, with no Invariant Sections, no Front-Cover Texts
.. and no Back-Cover Texts. A copy of the license is included at
.. Documentation/media/uapi/fdl-appendix.rst.
..
.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
.. _request-func-ioctl:

26
Documentation/media/uapi/mediactl/request-func-poll.rst
View File

@ -1,4 +1,28 @@
.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
.. This file is dual-licensed: you can use it either under the terms
.. of the GPL or the GFDL 1.1+ license, at your option. Note that this
.. dual licensing only applies to this file, and not this project as a
.. whole.
..
.. a) This file is free software; you can redistribute it and/or
.. modify it under the terms of the GNU General Public License as
.. published by the Free Software Foundation; either version 2 of
.. the License, or (at your option) any later version.
..
.. This file is distributed in the hope that it will be useful,
.. but WITHOUT ANY WARRANTY; without even the implied warranty of
.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
.. GNU General Public License for more details.
..
.. Or, alternatively,
..
.. b) Permission is granted to copy, distribute and/or modify this
.. document under the terms of the GNU Free Documentation License,
.. Version 1.1 or any later version published by the Free Software
.. Foundation, with no Invariant Sections, no Front-Cover Texts
.. and no Back-Cover Texts. A copy of the license is included at
.. Documentation/media/uapi/fdl-appendix.rst.
..
.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
.. _request-func-poll:

2
Documentation/media/uapi/v4l/dev-meta.rst
View File

@ -40,7 +40,7 @@ To use the :ref:`format` ioctls applications set the ``type`` field of the
the desired operation. Both drivers and applications must set the remainder of
the :c:type:`v4l2_format` structure to 0.
.. _v4l2-meta-format:
.. c:type:: v4l2_meta_format
.. tabularcolumns:: |p{1.4cm}|p{2.2cm}|p{13.9cm}|

10
Documentation/media/uapi/v4l/extended-controls.rst
View File

@ -1505,6 +1505,11 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
configuring a stateless hardware decoding pipeline for MPEG-2.
The bitstream parameters are defined according to :ref:`mpeg2part2`.
.. note::
This compound control is not yet part of the public kernel API and
it is expected to change.
.. c:type:: v4l2_ctrl_mpeg2_slice_params
.. cssclass:: longtable
@ -1625,6 +1630,11 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
Specifies quantization matrices (as extracted from the bitstream) for the
associated MPEG-2 slice data.
.. note::
This compound control is not yet part of the public kernel API and
it is expected to change.
.. c:type:: v4l2_ctrl_mpeg2_quantization
.. cssclass:: longtable

5
Documentation/media/uapi/v4l/vidioc-g-fmt.rst
View File

@ -132,6 +132,11 @@ The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical
- ``sdr``
- Definition of a data format, see :ref:`pixfmt`, used by SDR
capture and output devices.
* -
- struct :c:type:`v4l2_meta_format`
- ``meta``
- Definition of a metadata format, see :ref:`meta-formats`, used by
metadata capture devices.
* -
- __u8
- ``raw_data``\ [200]

17
Documentation/networking/rxrpc.txt
View File

@ -1056,18 +1056,23 @@ The kernel interface functions are as follows:
u32 rxrpc_kernel_check_life(struct socket *sock,
struct rxrpc_call *call);
void rxrpc_kernel_probe_life(struct socket *sock,
struct rxrpc_call *call);
This returns a number that is updated when ACKs are received from the peer
(notably including PING RESPONSE ACKs which we can elicit by sending PING
ACKs to see if the call still exists on the server). The caller should
compare the numbers of two calls to see if the call is still alive after
waiting for a suitable interval.
The first function returns a number that is updated when ACKs are received
from the peer (notably including PING RESPONSE ACKs which we can elicit by
sending PING ACKs to see if the call still exists on the server). The
caller should compare the numbers of two calls to see if the call is still
alive after waiting for a suitable interval.
This allows the caller to work out if the server is still contactable and
if the call is still alive on the server whilst waiting for the server to
process a client operation.
This function may transmit a PING ACK.
The second function causes a ping ACK to be transmitted to try to provoke
the peer into responding, which would then cause the value returned by the
first function to change. Note that this must be called in TASK_RUNNING
state.
(*) Get reply timestamp.

9
Documentation/userspace-api/spec_ctrl.rst
View File

@ -92,3 +92,12 @@ Speculation misfeature controls
* prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_ENABLE, 0, 0);
* prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_DISABLE, 0, 0);
* prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_FORCE_DISABLE, 0, 0);
- PR_SPEC_INDIR_BRANCH: Indirect Branch Speculation in User Processes
(Mitigate Spectre V2 style attacks against user processes)
Invocations:
* prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, 0, 0, 0);
* prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_ENABLE, 0, 0);
* prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_DISABLE, 0, 0);
* prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_FORCE_DISABLE, 0, 0);

32
Documentation/x86/boot.txt
View File

@ -61,18 +61,6 @@ Protocol 2.12: (Kernel 3.8) Added the xloadflags field and extension fields
to struct boot_params for loading bzImage and ramdisk
above 4G in 64bit.
Protocol 2.13: (Kernel 3.14) Support 32- and 64-bit flags being set in
xloadflags to support booting a 64-bit kernel from 32-bit
EFI
Protocol 2.14: (Kernel 4.20) Added acpi_rsdp_addr holding the physical
address of the ACPI RSDP table.
The bootloader updates version with:
0x8000 | min(kernel-version, bootloader-version)
kernel-version being the protocol version supported by
the kernel and bootloader-version the protocol version
supported by the bootloader.
**** MEMORY LAYOUT
The traditional memory map for the kernel loader, used for Image or
@ -209,7 +197,6 @@ Offset Proto Name Meaning
0258/8 2.10+ pref_address Preferred loading address
0260/4 2.10+ init_size Linear memory required during initialization
0264/4 2.11+ handover_offset Offset of handover entry point
0268/8 2.14+ acpi_rsdp_addr Physical address of RSDP table
(1) For backwards compatibility, if the setup_sects field contains 0, the
real value is 4.
@ -322,7 +309,7 @@ Protocol: 2.00+
Contains the magic number "HdrS" (0x53726448).
Field name: version
Type: modify
Type: read
Offset/size: 0x206/2
Protocol: 2.00+
@ -330,12 +317,6 @@ Protocol: 2.00+
e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
10.17.
Up to protocol version 2.13 this information is only read by the
bootloader. From protocol version 2.14 onwards the bootloader will
write the used protocol version or-ed with 0x8000 to the field. The
used protocol version will be the minimum of the supported protocol
versions of the bootloader and the kernel.
Field name: realmode_swtch
Type: modify (optional)
Offset/size: 0x208/4
@ -763,17 +744,6 @@ Offset/size: 0x264/4
See EFI HANDOVER PROTOCOL below for more details.
Field name: acpi_rsdp_addr
Type: write
Offset/size: 0x268/8
Protocol: 2.14+
This field can be set by the boot loader to tell the kernel the
physical address of the ACPI RSDP table.
A value of 0 indicates the kernel should fall back to the standard
methods to locate the RSDP.
**** THE IMAGE CHECKSUM

219
MAINTAINERS
View File

@ -180,6 +180,7 @@ F: drivers/net/hamradio/6pack.c
8169 10/100/1000 GIGABIT ETHERNET DRIVER
M: Realtek linux nic maintainers <nic_swsd@realtek.com>
M: Heiner Kallweit <hkallweit1@gmail.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/realtek/r8169.c
@ -717,7 +718,7 @@ F: include/linux/mfd/altera-a10sr.h
F: include/dt-bindings/reset/altr,rst-mgr-a10sr.h
ALTERA TRIPLE SPEED ETHERNET DRIVER
M: Vince Bridgers <vbridger@opensource.altera.com>
M: Thor Thayer <thor.thayer@linux.intel.com>
L: netdev@vger.kernel.org
L: nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
S: Maintained
@ -1309,6 +1310,13 @@ F: drivers/pinctrl/meson/
F: drivers/mmc/host/meson*
N: meson
ARM/Amlogic Meson SoC Sound Drivers
M: Jerome Brunet <jbrunet@baylibre.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Maintained
F: sound/soc/meson/
F: Documentation/devicetree/bindings/sound/amlogic*
ARM/Annapurna Labs ALPINE ARCHITECTURE
M: Tsahee Zidenberg <tsahee@annapurnalabs.com>
M: Antoine Tenart <antoine.tenart@bootlin.com>
@ -1471,6 +1479,7 @@ F: drivers/clk/sirf/
F: drivers/clocksource/timer-prima2.c
F: drivers/clocksource/timer-atlas7.c
N: [^a-z]sirf
X: drivers/gnss
ARM/EBSA110 MACHINE SUPPORT
M: Russell King <linux@armlinux.org.uk>
@ -1737,13 +1746,17 @@ ARM/Mediatek SoC support
M: Matthias Brugger <matthias.bgg@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-mediatek@lists.infradead.org (moderated for non-subscribers)
W: https://mtk.bcnfs.org/
C: irc://chat.freenode.net/linux-mediatek
S: Maintained
F: arch/arm/boot/dts/mt6*
F: arch/arm/boot/dts/mt7*
F: arch/arm/boot/dts/mt8*
F: arch/arm/mach-mediatek/
F: arch/arm64/boot/dts/mediatek/
F: drivers/soc/mediatek/
N: mtk
N: mt[678]
K: mediatek
ARM/Mediatek USB3 PHY DRIVER
@ -1922,7 +1935,6 @@ ARM/QUALCOMM SUPPORT
M: Andy Gross <andy.gross@linaro.org>
M: David Brown <david.brown@linaro.org>
L: linux-arm-msm@vger.kernel.org
L: linux-soc@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/soc/qcom/
F: arch/arm/boot/dts/qcom-*.dts
@ -2490,7 +2502,7 @@ F: drivers/net/wireless/ath/*
ATHEROS ATH5K WIRELESS DRIVER
M: Jiri Slaby <jirislaby@gmail.com>
M: Nick Kossifidis <mickflemm@gmail.com>
M: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
M: Luis Chamberlain <mcgrof@kernel.org>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/ath5k
S: Maintained
@ -2800,7 +2812,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git
Q: https://patchwork.ozlabs.org/project/netdev/list/?delegate=77147
S: Supported
F: arch/x86/net/bpf_jit*
F: arch/*/net/*
F: Documentation/networking/filter.txt
F: Documentation/bpf/
F: include/linux/bpf*
@ -2820,6 +2832,67 @@ F: tools/bpf/
F: tools/lib/bpf/
F: tools/testing/selftests/bpf/
BPF JIT for ARM
M: Shubham Bansal <illusionist.neo@gmail.com>
L: netdev@vger.kernel.org
S: Maintained
F: arch/arm/net/
BPF JIT for ARM64
M: Daniel Borkmann <daniel@iogearbox.net>
M: Alexei Starovoitov <ast@kernel.org>
M: Zi Shen Lim <zlim.lnx@gmail.com>
L: netdev@vger.kernel.org
S: Supported
F: arch/arm64/net/
BPF JIT for MIPS (32-BIT AND 64-BIT)
M: Paul Burton <paul.burton@mips.com>
L: netdev@vger.kernel.org
S: Maintained
F: arch/mips/net/
BPF JIT for NFP NICs
M: Jakub Kicinski <jakub.kicinski@netronome.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/netronome/nfp/bpf/
BPF JIT for POWERPC (32-BIT AND 64-BIT)
M: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
M: Sandipan Das <sandipan@linux.ibm.com>
L: netdev@vger.kernel.org
S: Maintained
F: arch/powerpc/net/
BPF JIT for S390
M: Martin Schwidefsky <schwidefsky@de.ibm.com>
M: Heiko Carstens <heiko.carstens@de.ibm.com>
L: netdev@vger.kernel.org
S: Maintained
F: arch/s390/net/
X: arch/s390/net/pnet.c
BPF JIT for SPARC (32-BIT AND 64-BIT)
M: David S. Miller <davem@davemloft.net>
L: netdev@vger.kernel.org
S: Maintained
F: arch/sparc/net/
BPF JIT for X86 32-BIT
M: Wang YanQing <udknight@gmail.com>
L: netdev@vger.kernel.org
S: Maintained
F: arch/x86/net/bpf_jit_comp32.c
BPF JIT for X86 64-BIT
M: Alexei Starovoitov <ast@kernel.org>
M: Daniel Borkmann <daniel@iogearbox.net>
L: netdev@vger.kernel.org
S: Supported
F: arch/x86/net/
X: arch/x86/net/bpf_jit_comp32.c
BROADCOM B44 10/100 ETHERNET DRIVER
M: Michael Chan <michael.chan@broadcom.com>
L: netdev@vger.kernel.org
@ -2860,7 +2933,7 @@ F: drivers/staging/vc04_services
BROADCOM BCM47XX MIPS ARCHITECTURE
M: Hauke Mehrtens <hauke@hauke-m.de>
M: Rafał Miłecki <zajec5@gmail.com>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/mips/brcm/
F: arch/mips/bcm47xx/*
@ -2869,7 +2942,6 @@ F: arch/mips/include/asm/mach-bcm47xx/*
BROADCOM BCM5301X ARM ARCHITECTURE
M: Hauke Mehrtens <hauke@hauke-m.de>
M: Rafał Miłecki <zajec5@gmail.com>
M: Jon Mason <jonmason@broadcom.com>
M: bcm-kernel-feedback-list@broadcom.com
L: linux-arm-kernel@lists.infradead.org
S: Maintained
@ -2924,7 +2996,7 @@ F: drivers/cpufreq/bmips-cpufreq.c
BROADCOM BMIPS MIPS ARCHITECTURE
M: Kevin Cernekee <cernekee@gmail.com>
M: Florian Fainelli <f.fainelli@gmail.com>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
T: git git://github.com/broadcom/stblinux.git
S: Maintained
F: arch/mips/bmips/*
@ -3015,7 +3087,6 @@ F: drivers/net/ethernet/broadcom/genet/
BROADCOM IPROC ARM ARCHITECTURE
M: Ray Jui <rjui@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
M: Jon Mason <jonmason@broadcom.com>
M: bcm-kernel-feedback-list@broadcom.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://github.com/broadcom/cygnus-linux.git
@ -3062,7 +3133,7 @@ F: include/uapi/rdma/bnxt_re-abi.h
BROADCOM NVRAM DRIVER
M: Rafał Miłecki <zajec5@gmail.com>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Maintained
F: drivers/firmware/broadcom/*
@ -3212,11 +3283,16 @@ S: Maintained
F: sound/pci/oxygen/
C-SKY ARCHITECTURE
M: Guo Ren <ren_guo@c-sky.com>
M: Guo Ren <guoren@kernel.org>
T: git https://github.com/c-sky/csky-linux.git
S: Supported
F: arch/csky/
F: Documentation/devicetree/bindings/csky/
F: drivers/irqchip/irq-csky-*
F: Documentation/devicetree/bindings/interrupt-controller/csky,*
F: drivers/clocksource/timer-gx6605s.c
F: drivers/clocksource/timer-mp-csky.c
F: Documentation/devicetree/bindings/timer/csky,*
K: csky
N: csky
@ -3276,6 +3352,12 @@ F: include/uapi/linux/caif/
F: include/net/caif/
F: net/caif/
CAKE QDISC
M: Toke Høiland-Jørgensen <toke@toke.dk>
L: cake@lists.bufferbloat.net (moderated for non-subscribers)
S: Maintained
F: net/sched/sch_cake.c
CALGARY x86-64 IOMMU
M: Muli Ben-Yehuda <mulix@mulix.org>
M: Jon Mason <jdmason@kudzu.us>
@ -4158,7 +4240,7 @@ F: net/decnet/
DECSTATION PLATFORM SUPPORT
M: "Maciej W. Rozycki" <macro@linux-mips.org>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
W: http://www.linux-mips.org/wiki/DECstation
S: Maintained
F: arch/mips/dec/
@ -4772,6 +4854,7 @@ F: include/uapi/drm/vmwgfx_drm.h
DRM DRIVERS
M: David Airlie <airlied@linux.ie>
M: Daniel Vetter <daniel@ffwll.ch>
L: dri-devel@lists.freedesktop.org
T: git git://anongit.freedesktop.org/drm/drm
B: https://bugs.freedesktop.org/
@ -5249,7 +5332,7 @@ EDAC-CAVIUM OCTEON
M: Ralf Baechle <ralf@linux-mips.org>
M: David Daney <david.daney@cavium.com>
L: linux-edac@vger.kernel.org
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Supported
F: drivers/edac/octeon_edac*
@ -5528,6 +5611,7 @@ F: net/bridge/
ETHERNET PHY LIBRARY
M: Andrew Lunn <andrew@lunn.ch>
M: Florian Fainelli <f.fainelli@gmail.com>
M: Heiner Kallweit <hkallweit1@gmail.com>
L: netdev@vger.kernel.org
S: Maintained
F: Documentation/ABI/testing/sysfs-bus-mdio
@ -5766,7 +5850,7 @@ F: include/uapi/linux/firewire*.h
F: tools/firewire/
FIRMWARE LOADER (request_firmware)
M: Luis R. Rodriguez <mcgrof@kernel.org>
M: Luis Chamberlain <mcgrof@kernel.org>
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/firmware_class/
@ -6250,6 +6334,7 @@ F: include/uapi/linux/gigaset_dev.h
GNSS SUBSYSTEM
M: Johan Hovold <johan@kernel.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss.git
S: Maintained
F: Documentation/ABI/testing/sysfs-class-gnss
F: Documentation/devicetree/bindings/gnss/
@ -6299,6 +6384,7 @@ F: tools/testing/selftests/gpio/
GPIO SUBSYSTEM
M: Linus Walleij <linus.walleij@linaro.org>
M: Bartosz Golaszewski <bgolaszewski@baylibre.com>
L: linux-gpio@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
S: Maintained
@ -7436,6 +7522,20 @@ S: Maintained
F: Documentation/fb/intelfb.txt
F: drivers/video/fbdev/intelfb/
INTEL GPIO DRIVERS
M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
L: linux-gpio@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git
F: drivers/gpio/gpio-ich.c
F: drivers/gpio/gpio-intel-mid.c
F: drivers/gpio/gpio-lynxpoint.c
F: drivers/gpio/gpio-merrifield.c
F: drivers/gpio/gpio-ml-ioh.c
F: drivers/gpio/gpio-pch.c
F: drivers/gpio/gpio-sch.c
F: drivers/gpio/gpio-sodaville.c
INTEL GVT-g DRIVERS (Intel GPU Virtualization)
M: Zhenyu Wang <zhenyuw@linux.intel.com>
M: Zhi Wang <zhi.a.wang@intel.com>
@ -7446,12 +7546,6 @@ T: git https://github.com/intel/gvt-linux.git
S: Supported
F: drivers/gpu/drm/i915/gvt/
INTEL PMIC GPIO DRIVER
R: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
S: Maintained
F: drivers/gpio/gpio-*cove.c
F: drivers/gpio/gpio-msic.c
INTEL HID EVENT DRIVER
M: Alex Hung <alex.hung@canonical.com>
L: platform-driver-x86@vger.kernel.org
@ -7539,12 +7633,6 @@ W: https://01.org/linux-acpi
S: Supported
F: drivers/platform/x86/intel_menlow.c
INTEL MERRIFIELD GPIO DRIVER
M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
L: linux-gpio@vger.kernel.org
S: Maintained
F: drivers/gpio/gpio-merrifield.c
INTEL MIC DRIVERS (mic)
M: Sudeep Dutt <sudeep.dutt@intel.com>
M: Ashutosh Dixit <ashutosh.dixit@intel.com>
@ -7577,6 +7665,13 @@ F: drivers/platform/x86/intel_punit_ipc.c
F: arch/x86/include/asm/intel_pmc_ipc.h
F: arch/x86/include/asm/intel_punit_ipc.h
INTEL PMIC GPIO DRIVERS
M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git
F: drivers/gpio/gpio-*cove.c
F: drivers/gpio/gpio-msic.c
INTEL MULTIFUNCTION PMIC DEVICE DRIVERS
R: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
S: Maintained
@ -7685,7 +7780,7 @@ F: Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
IOC3 ETHERNET DRIVER
M: Ralf Baechle <ralf@linux-mips.org>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/sgi/ioc3-eth.c
@ -8056,7 +8151,7 @@ F: tools/testing/selftests/
F: Documentation/dev-tools/kselftest*
KERNEL USERMODE HELPER
M: "Luis R. Rodriguez" <mcgrof@kernel.org>
M: Luis Chamberlain <mcgrof@kernel.org>
L: linux-kernel@vger.kernel.org
S: Maintained
F: kernel/umh.c
@ -8113,7 +8208,7 @@ F: arch/arm64/kvm/
KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
M: James Hogan <jhogan@kernel.org>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Supported
F: arch/mips/include/uapi/asm/kvm*
F: arch/mips/include/asm/kvm*
@ -8232,7 +8327,7 @@ F: mm/kmemleak.c
F: mm/kmemleak-test.c
KMOD KERNEL MODULE LOADER - USERMODE HELPER
M: "Luis R. Rodriguez" <mcgrof@kernel.org>
M: Luis Chamberlain <mcgrof@kernel.org>
L: linux-kernel@vger.kernel.org
S: Maintained
F: kernel/kmod.c
@ -8286,7 +8381,7 @@ F: drivers/net/dsa/lantiq_gswip.c
LANTIQ MIPS ARCHITECTURE
M: John Crispin <john@phrozen.org>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Maintained
F: arch/mips/lantiq
F: drivers/soc/lantiq
@ -8849,7 +8944,7 @@ S: Maintained
MARDUK (CREATOR CI40) DEVICE TREE SUPPORT
M: Rahul Bedarkar <rahulbedarkar89@gmail.com>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Maintained
F: arch/mips/boot/dts/img/pistachio_marduk.dts
@ -9808,7 +9903,7 @@ F: drivers/dma/at_xdmac.c
MICROSEMI MIPS SOCS
M: Alexandre Belloni <alexandre.belloni@bootlin.com>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Maintained
F: arch/mips/generic/board-ocelot.c
F: arch/mips/configs/generic/board-ocelot.config
@ -9848,7 +9943,7 @@ MIPS
M: Ralf Baechle <ralf@linux-mips.org>
M: Paul Burton <paul.burton@mips.com>
M: James Hogan <jhogan@kernel.org>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
W: http://www.linux-mips.org/
T: git git://git.linux-mips.org/pub/scm/ralf/linux.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git
@ -9861,7 +9956,7 @@ F: drivers/platform/mips/
MIPS BOSTON DEVELOPMENT BOARD
M: Paul Burton <paul.burton@mips.com>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/clock/img,boston-clock.txt
F: arch/mips/boot/dts/img/boston.dts
@ -9871,7 +9966,7 @@ F: include/dt-bindings/clock/boston-clock.h
MIPS GENERIC PLATFORM
M: Paul Burton <paul.burton@mips.com>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/power/mti,mips-cpc.txt
F: arch/mips/generic/
@ -9879,7 +9974,7 @@ F: arch/mips/tools/generic-board-config.sh
MIPS/LOONGSON1 ARCHITECTURE
M: Keguang Zhang <keguang.zhang@gmail.com>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Maintained
F: arch/mips/loongson32/
F: arch/mips/include/asm/mach-loongson32/
@ -9888,7 +9983,7 @@ F: drivers/*/*/*loongson1*
MIPS/LOONGSON2 ARCHITECTURE
M: Jiaxun Yang <jiaxun.yang@flygoat.com>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Maintained
F: arch/mips/loongson64/fuloong-2e/
F: arch/mips/loongson64/lemote-2f/
@ -9898,7 +9993,7 @@ F: drivers/*/*/*loongson2*
MIPS/LOONGSON3 ARCHITECTURE
M: Huacai Chen <chenhc@lemote.com>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Maintained
F: arch/mips/loongson64/
F: arch/mips/include/asm/mach-loongson64/
@ -9908,7 +10003,7 @@ F: drivers/*/*/*loongson3*
MIPS RINT INSTRUCTION EMULATION
M: Aleksandar Markovic <aleksandar.markovic@mips.com>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Supported
F: arch/mips/math-emu/sp_rint.c
F: arch/mips/math-emu/dp_rint.c
@ -9922,12 +10017,9 @@ S: Odd Fixes
F: drivers/media/radio/radio-miropcm20*
MMP SUPPORT
M: Eric Miao <eric.y.miao@gmail.com>
M: Haojian Zhuang <haojian.zhuang@gmail.com>
R: Lubomir Rintel <lkundrak@v3.sk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://github.com/hzhuang1/linux.git
T: git git://git.linaro.org/people/ycmiao/pxa-linux.git
S: Maintained
S: Odd Fixes
F: arch/arm/boot/dts/mmp*
F: arch/arm/mach-mmp/
@ -10710,7 +10802,10 @@ M: Jarkko Nikula <jarkko.nikula@bitmer.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
L: linux-omap@vger.kernel.org
S: Maintained
F: sound/soc/omap/
F: sound/soc/ti/omap*
F: sound/soc/ti/rx51.c
F: sound/soc/ti/n810.c
F: sound/soc/ti/sdma-pcm.*
OMAP CLOCK FRAMEWORK SUPPORT
M: Paul Walmsley <paul@pwsan.com>
@ -10893,7 +10988,7 @@ F: include/linux/platform_data/i2c-omap.h
ONION OMEGA2+ BOARD
M: Harvey Hunt <harveyhuntnexus@gmail.com>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Maintained
F: arch/mips/boot/dts/ralink/omega2p.dts
@ -11802,7 +11897,7 @@ F: drivers/pinctrl/spear/
PISTACHIO SOC SUPPORT
M: James Hartley <james.hartley@sondrel.com>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Odd Fixes
F: arch/mips/pistachio/
F: arch/mips/include/asm/mach-pistachio/
@ -11982,7 +12077,7 @@ F: kernel/printk/
F: include/linux/printk.h
PRISM54 WIRELESS DRIVER
M: "Luis R. Rodriguez" <mcgrof@gmail.com>
M: Luis Chamberlain <mcgrof@kernel.org>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/p54
S: Obsolete
@ -11996,9 +12091,10 @@ S: Maintained
F: fs/proc/
F: include/linux/proc_fs.h
F: tools/testing/selftests/proc/
F: Documentation/filesystems/proc.txt
PROC SYSCTL
M: "Luis R. Rodriguez" <mcgrof@kernel.org>
M: Luis Chamberlain <mcgrof@kernel.org>
M: Kees Cook <keescook@chromium.org>
L: linux-kernel@vger.kernel.org
L: linux-fsdevel@vger.kernel.org
@ -12461,7 +12557,7 @@ F: drivers/media/usb/rainshadow-cec/*
RALINK MIPS ARCHITECTURE
M: John Crispin <john@phrozen.org>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Maintained
F: arch/mips/ralink
@ -12481,7 +12577,7 @@ F: drivers/block/brd.c
RANCHU VIRTUAL BOARD FOR MIPS
M: Miodrag Dinic <miodrag.dinic@mips.com>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Supported
F: arch/mips/generic/board-ranchu.c
F: arch/mips/configs/generic/board-ranchu.config
@ -13806,6 +13902,13 @@ F: drivers/md/raid*
F: include/linux/raid/
F: include/uapi/linux/raid/
SOCIONEXT (SNI) AVE NETWORK DRIVER
M: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/socionext/sni_ave.c
F: Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
SOCIONEXT (SNI) NETSEC NETWORK DRIVER
M: Jassi Brar <jaswinder.singh@linaro.org>
L: netdev@vger.kernel.org
@ -13979,11 +14082,10 @@ F: drivers/tty/serial/sunzilog.h
F: drivers/tty/vcc.c
SPARSE CHECKER
M: "Christopher Li" <sparse@chrisli.org>
M: "Luc Van Oostenryck" <luc.vanoostenryck@gmail.com>
L: linux-sparse@vger.kernel.org
W: https://sparse.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/devel/sparse/sparse.git
T: git git://git.kernel.org/pub/scm/devel/sparse/chrisl/sparse.git
S: Maintained
F: include/linux/compiler.h
@ -14080,6 +14182,7 @@ F: Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
STABLE BRANCH
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M: Sasha Levin <sashal@kernel.org>
L: stable@vger.kernel.org
S: Supported
F: Documentation/process/stable-kernel-rules.rst
@ -14746,6 +14849,12 @@ F: Documentation/devicetree/bindings/clock/ti,sci-clk.txt
F: drivers/clk/keystone/sci-clk.c
F: drivers/reset/reset-ti-sci.c
Texas Instruments ASoC drivers
M: Peter Ujfalusi <peter.ujfalusi@ti.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Maintained
F: sound/soc/ti/
THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
L: linux-media@vger.kernel.org
@ -15217,7 +15326,7 @@ F: arch/um/os-Linux/drivers/
TURBOCHANNEL SUBSYSTEM
M: "Maciej W. Rozycki" <macro@linux-mips.org>
M: Ralf Baechle <ralf@linux-mips.org>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
Q: http://patchwork.linux-mips.org/project/linux-mips/list/
S: Maintained
F: drivers/tc/
@ -16038,7 +16147,7 @@ F: drivers/net/vmxnet3/
VOCORE VOCORE2 BOARD
M: Harvey Hunt <harveyhuntnexus@gmail.com>
L: linux-mips@linux-mips.org
L: linux-mips@vger.kernel.org
S: Maintained
F: arch/mips/boot/dts/ralink/vocore2.dts

4
Makefile
View File

@ -2,8 +2,8 @@
VERSION = 4
PATCHLEVEL = 20
SUBLEVEL = 0
EXTRAVERSION = -rc3
NAME = "People's Front"
EXTRAVERSION = -rc7
NAME = Shy Crocodile
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"

1
arch/alpha/kernel/setup.c
View File

@ -634,6 +634,7 @@ setup_arch(char **cmdline_p)
/* Find our memory. */
setup_memory(kernel_end);
memblock_set_bottom_up(true);
/* First guess at cpu cache sizes. Do this before init_arch. */
determine_cpu_caches(cpu->type);

6
arch/alpha/mm/numa.c
View File

@ -144,14 +144,14 @@ setup_memory_node(int nid, void *kernel_end)
if (!nid && (node_max_pfn < end_kernel_pfn || node_min_pfn > start_kernel_pfn))
panic("kernel loaded out of ram");
memblock_add(PFN_PHYS(node_min_pfn),
(node_max_pfn - node_min_pfn) << PAGE_SHIFT);
/* Zone start phys-addr must be 2^(MAX_ORDER-1) aligned.
Note that we round this down, not up - node memory
has much larger alignment than 8Mb, so it's safe. */
node_min_pfn &= ~((1UL << (MAX_ORDER-1))-1);
memblock_add(PFN_PHYS(node_min_pfn),
(node_max_pfn - node_min_pfn) << PAGE_SHIFT);
NODE_DATA(nid)->node_start_pfn = node_min_pfn;
NODE_DATA(nid)->node_present_pages = node_max_pfn - node_min_pfn;

13
arch/arc/Kconfig
View File

@ -109,7 +109,7 @@ endmenu
choice
prompt "ARC Instruction Set"
default ISA_ARCOMPACT
default ISA_ARCV2
config ISA_ARCOMPACT
bool "ARCompact ISA"
@ -176,13 +176,11 @@ endchoice
config CPU_BIG_ENDIAN
bool "Enable Big Endian Mode"
default n
help
Build kernel for Big Endian Mode of ARC CPU
config SMP
bool "Symmetric Multi-Processing"
default n
select ARC_MCIP if ISA_ARCV2
help
This enables support for systems with more than one CPU.
@ -254,7 +252,6 @@ config ARC_CACHE_PAGES
config ARC_CACHE_VIPT_ALIASING
bool "Support VIPT Aliasing D$"
depends on ARC_HAS_DCACHE && ISA_ARCOMPACT
default n
endif #ARC_CACHE
@ -262,7 +259,6 @@ config ARC_HAS_ICCM
bool "Use ICCM"
help
Single Cycle RAMS to store Fast Path Code
default n
config ARC_ICCM_SZ
int "ICCM Size in KB"
@ -273,7 +269,6 @@ config ARC_HAS_DCCM
bool "Use DCCM"
help
Single Cycle RAMS to store Fast Path Data
default n
config ARC_DCCM_SZ
int "DCCM Size in KB"
@ -366,13 +361,11 @@ if ISA_ARCOMPACT
config ARC_COMPACT_IRQ_LEVELS
bool "Setup Timer IRQ as high Priority"
default n
# if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
depends on !SMP
config ARC_FPU_SAVE_RESTORE
bool "Enable FPU state persistence across context switch"
default n
help
Double Precision Floating Point unit had dedicated regs which
need to be saved/restored across context-switch.
@ -453,7 +446,6 @@ config HIGHMEM
config ARC_HAS_PAE40
bool "Support for the 40-bit Physical Address Extension"
default n
depends on ISA_ARCV2
select HIGHMEM
select PHYS_ADDR_T_64BIT
@ -496,7 +488,6 @@ config HZ
config ARC_METAWARE_HLINK
bool "Support for Metaware debugger assisted Host access"
default n
help
This options allows a Linux userland apps to directly access
host file system (open/creat/read/write etc) with help from
@ -524,13 +515,11 @@ config ARC_DW2_UNWIND
config ARC_DBG_TLB_PARANOIA
bool "Paranoia Checks in Low Level TLB Handlers"
default n
endif
config ARC_UBOOT_SUPPORT
bool "Support uboot arg Handling"
default n
help
ARC Linux by default checks for uboot provided args as pointers to
external cmdline or DTB. This however breaks in absence of uboot,

2
arch/arc/Makefile
View File

@ -6,7 +6,7 @@
# published by the Free Software Foundation.
#
KBUILD_DEFCONFIG := nsim_700_defconfig
KBUILD_DEFCONFIG := nsim_hs_defconfig
cflags-y += -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
cflags-$(CONFIG_ISA_ARCOMPACT) += -mA7

15
arch/arc/boot/dts/hsdk.dts
View File

@ -222,6 +222,21 @@
bus-width = <4>;
dma-coherent;
};
gpio: gpio@3000 {
compatible = "snps,dw-apb-gpio";
reg = <0x3000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
gpio_port_a: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <24>;
reg = <0>;
};
};
};
memory@80000000 {

2
arch/arc/configs/axs101_defconfig
View File

@ -14,6 +14,7 @@ CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_ISA_ARCOMPACT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
@ -95,6 +96,7 @@ CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set

1
arch/arc/configs/axs103_defconfig
View File

@ -94,6 +94,7 @@ CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set

1
arch/arc/configs/axs103_smp_defconfig
View File

@ -97,6 +97,7 @@ CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set

4
arch/arc/configs/hsdk_defconfig
View File

@ -45,6 +45,9 @@ CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_DWAPB=y
# CONFIG_HWMON is not set
CONFIG_DRM=y
# CONFIG_DRM_FBDEV_EMULATION is not set
@ -65,6 +68,7 @@ CONFIG_EXT3_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set

2
arch/arc/configs/nps_defconfig
View File

@ -15,6 +15,7 @@ CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_ISA_ARCOMPACT=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
@ -73,6 +74,7 @@ CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_ROOT_NFS=y
CONFIG_DEBUG_INFO=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set

1
arch/arc/configs/nsim_700_defconfig
View File

@ -15,6 +15,7 @@ CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_ISA_ARCOMPACT=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
# CONFIG_LBDAF is not set

2
arch/arc/configs/nsimosci_defconfig
View File

@ -15,6 +15,7 @@ CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_ISA_ARCOMPACT=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
# CONFIG_LBDAF is not set
@ -66,5 +67,6 @@ CONFIG_EXT2_FS_XATTR=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set

1
arch/arc/configs/nsimosci_hs_defconfig
View File

@ -65,5 +65,6 @@ CONFIG_EXT2_FS_XATTR=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set

1
arch/arc/configs/nsimosci_hs_smp_defconfig
View File

@ -76,6 +76,7 @@ CONFIG_EXT2_FS_XATTR=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FTRACE=y

1
arch/arc/configs/tb10x_defconfig
View File

@ -19,6 +19,7 @@ CONFIG_KALLSYMS_ALL=y
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
# CONFIG_COMPAT_BRK is not set
CONFIG_ISA_ARCOMPACT=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y

1
arch/arc/configs/vdk_hs38_defconfig
View File

@ -85,6 +85,7 @@ CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set

1
arch/arc/configs/vdk_hs38_smp_defconfig
View File

@ -90,6 +90,7 @@ CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set

2
arch/arc/include/asm/cache.h
View File

@ -113,7 +113,9 @@ extern unsigned long perip_base, perip_end;
/* IO coherency related Auxiliary registers */
#define ARC_REG_IO_COH_ENABLE 0x500
#define ARC_IO_COH_ENABLE_BIT BIT(0)
#define ARC_REG_IO_COH_PARTIAL 0x501
#define ARC_IO_COH_PARTIAL_BIT BIT(0)
#define ARC_REG_IO_COH_AP0_BASE 0x508
#define ARC_REG_IO_COH_AP0_SIZE 0x509

72
arch/arc/include/asm/io.h
View File

@ -12,6 +12,7 @@
#include <linux/types.h>
#include <asm/byteorder.h>
#include <asm/page.h>
#include <asm/unaligned.h>
#ifdef CONFIG_ISA_ARCV2
#include <asm/barrier.h>
@ -94,6 +95,42 @@ static inline u32 __raw_readl(const volatile void __iomem *addr)
return w;
}
/*
* {read,write}s{b,w,l}() repeatedly access the same IO address in
* native endianness in 8-, 16-, 32-bit chunks {into,from} memory,
* @count times
*/
#define __raw_readsx(t,f) \
static inline void __raw_reads##f(const volatile void __iomem *addr, \
void *ptr, unsigned int count) \
{ \
bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0; \
u##t *buf = ptr; \
\
if (!count) \
return; \
\
/* Some ARC CPU's don't support unaligned accesses */ \
if (is_aligned) { \
do { \
u##t x = __raw_read##f(addr); \
*buf++ = x; \
} while (--count); \
} else { \
do { \
u##t x = __raw_read##f(addr); \
put_unaligned(x, buf++); \
} while (--count); \
} \
}
#define __raw_readsb __raw_readsb
__raw_readsx(8, b)
#define __raw_readsw __raw_readsw
__raw_readsx(16, w)
#define __raw_readsl __raw_readsl
__raw_readsx(32, l)
#define __raw_writeb __raw_writeb
static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
{
@ -126,6 +163,35 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
}
#define __raw_writesx(t,f) \
static inline void __raw_writes##f(volatile void __iomem *addr, \
const void *ptr, unsigned int count) \
{ \
bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0; \
const u##t *buf = ptr; \
\
if (!count) \
return; \
\
/* Some ARC CPU's don't support unaligned accesses */ \
if (is_aligned) { \
do { \
__raw_write##f(*buf++, addr); \
} while (--count); \
} else { \
do { \
__raw_write##f(get_unaligned(buf++), addr); \
} while (--count); \
} \
}
#define __raw_writesb __raw_writesb
__raw_writesx(8, b)
#define __raw_writesw __raw_writesw
__raw_writesx(16, w)
#define __raw_writesl __raw_writesl
__raw_writesx(32, l)
/*
* MMIO can also get buffered/optimized in micro-arch, so barriers needed
* Based on ARM model for the typical use case
@ -141,10 +207,16 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
#define readb(c) ({ u8 __v = readb_relaxed(c); __iormb(); __v; })
#define readw(c) ({ u16 __v = readw_relaxed(c); __iormb(); __v; })
#define readl(c) ({ u32 __v = readl_relaxed(c); __iormb(); __v; })
#define readsb(p,d,l) ({ __raw_readsb(p,d,l); __iormb(); })
#define readsw(p,d,l) ({ __raw_readsw(p,d,l); __iormb(); })
#define readsl(p,d,l) ({ __raw_readsl(p,d,l); __iormb(); })
#define writeb(v,c) ({ __iowmb(); writeb_relaxed(v,c); })
#define writew(v,c) ({ __iowmb(); writew_relaxed(v,c); })
#define writel(v,c) ({ __iowmb(); writel_relaxed(v,c); })
#define writesb(p,d,l) ({ __iowmb(); __raw_writesb(p,d,l); })
#define writesw(p,d,l) ({ __iowmb(); __raw_writesw(p,d,l); })
#define writesl(p,d,l) ({ __iowmb(); __raw_writesl(p,d,l); })
/*
* Relaxed API for drivers which can handle barrier ordering themselves

9
arch/arc/kernel/setup.c
View File

@ -243,7 +243,7 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
{
struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
struct bcr_identity *core = &cpu->core;
int i, n = 0;
int i, n = 0, ua = 0;
FIX_PTR(cpu);
@ -263,10 +263,13 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
IS_AVAIL2(cpu->extn.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
IS_AVAIL2(cpu->extn.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT));
n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s",
#ifdef __ARC_UNALIGNED__
ua = 1;
#endif
n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s%s",
IS_AVAIL2(cpu->isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
IS_AVAIL2(cpu->isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64),
IS_AVAIL1(cpu->isa.unalign, "unalign (not used)"));
IS_AVAIL1(cpu->isa.unalign, "unalign "), IS_USED_RUN(ua));
if (i)
n += scnprintf(buf + n, len - n, "\n\t\t: ");

20
arch/arc/mm/cache.c
View File

@ -1144,6 +1144,20 @@ noinline void __init arc_ioc_setup(void)
{
unsigned int ioc_base, mem_sz;
/*
* If IOC was already enabled (due to bootloader) it technically needs to
* be reconfigured with aperture base,size corresponding to Linux memory map
* which will certainly be different than uboot's. But disabling and
* reenabling IOC when DMA might be potentially active is tricky business.
* To avoid random memory issues later, just panic here and ask user to
* upgrade bootloader to one which doesn't enable IOC
*/
if (read_aux_reg(ARC_REG_IO_COH_ENABLE) & ARC_IO_COH_ENABLE_BIT)
panic("IOC already enabled, please upgrade bootloader!\n");
if (!ioc_enable)
return;
/*
* As for today we don't support both IOC and ZONE_HIGHMEM enabled
* simultaneously. This happens because as of today IOC aperture covers
@ -1187,8 +1201,8 @@ noinline void __init arc_ioc_setup(void)
panic("IOC Aperture start must be aligned to the size of the aperture");
write_aux_reg(ARC_REG_IO_COH_AP0_BASE, ioc_base >> 12);
write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1);
write_aux_reg(ARC_REG_IO_COH_ENABLE, 1);
write_aux_reg(ARC_REG_IO_COH_PARTIAL, ARC_IO_COH_PARTIAL_BIT);
write_aux_reg(ARC_REG_IO_COH_ENABLE, ARC_IO_COH_ENABLE_BIT);
/* Re-enable L1 dcache */
__dc_enable();
@ -1265,7 +1279,7 @@ void __init arc_cache_init_master(void)
if (is_isa_arcv2() && l2_line_sz && !slc_enable)
arc_slc_disable();
if (is_isa_arcv2() && ioc_enable)
if (is_isa_arcv2() && ioc_exists)
arc_ioc_setup();
if (is_isa_arcv2() && l2_line_sz && slc_enable) {

2
arch/arc/mm/fault.c
View File

@ -66,7 +66,7 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
struct vm_area_struct *vma = NULL;
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
int si_code;
int si_code = 0;
int ret;
vm_fault_t fault;
int write = regs->ecr_cause & ECR_C_PROTV_STORE; /* ST/EX */

2
arch/arm/boot/dts/am3517-evm.dts
View File

@ -228,7 +228,7 @@
vmmc-supply = <&vmmc_fixed>;
bus-width = <4>;
wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */
cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
};
&mmc3 {

2
arch/arm/boot/dts/am3517-som.dtsi
View File

@ -163,7 +163,7 @@
compatible = "ti,wl1271";
reg = <2>;
interrupt-parent = <&gpio6>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */
interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */
ref-clock-frequency = <26000000>;
tcxo-clock-frequency = <26000000>;
};

4
arch/arm/boot/dts/arm-realview-pb1176.dts
View File

@ -45,7 +45,7 @@
};
/* The voltage to the MMC card is hardwired at 3.3V */
vmmc: fixedregulator@0 {
vmmc: regulator-vmmc {
compatible = "regulator-fixed";
regulator-name = "vmmc";
regulator-min-microvolt = <3300000>;
@ -53,7 +53,7 @@
regulator-boot-on;
};
veth: fixedregulator@0 {
veth: regulator-veth {
compatible = "regulator-fixed";
regulator-name = "veth";
regulator-min-microvolt = <3300000>;

4
arch/arm/boot/dts/arm-realview-pb11mp.dts
View File

@ -145,7 +145,7 @@
};
/* The voltage to the MMC card is hardwired at 3.3V */
vmmc: fixedregulator@0 {
vmmc: regulator-vmmc {
compatible = "regulator-fixed";
regulator-name = "vmmc";
regulator-min-microvolt = <3300000>;
@ -153,7 +153,7 @@
regulator-boot-on;
};
veth: fixedregulator@0 {
veth: regulator-veth {
compatible = "regulator-fixed";
regulator-name = "veth";
regulator-min-microvolt = <3300000>;

2
arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
View File

@ -31,7 +31,7 @@
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
};
};

2
arch/arm/boot/dts/bcm2837-rpi-3-b.dts
View File

@ -26,7 +26,7 @@
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
};
};

6
arch/arm/boot/dts/imx51-zii-rdu1.dts
View File

@ -492,12 +492,6 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
eeprom@50 {
compatible = "atmel,24c04";
pagesize = <16>;
reg = <0x50>;
};
hpa1: amp@60 {
compatible = "ti,tpa6130a2";
reg = <0x60>;

9
arch/arm/boot/dts/imx7d-nitrogen7.dts
View File

@ -86,13 +86,17 @@
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
clock-names = "slow";
regulator-name = "reg_wlan";
startup-delay-us = <70000>;
gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
usdhc2_pwrseq: usdhc2_pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
clock-names = "ext_clock";
};
};
&adc1 {
@ -375,6 +379,7 @@
bus-width = <4>;
non-removable;
vmmc-supply = <&reg_wlan>;
mmc-pwrseq = <&usdhc2_pwrseq>;
cap-power-off-card;
keep-power-in-suspend;
status = "okay";

22
arch/arm/boot/dts/imx7d-pico.dtsi
View File

@ -100,6 +100,19 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
usdhc2_pwrseq: usdhc2_pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
clock-names = "ext_clock";
};
};
&clks {
assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
<&clks IMX7D_CLKO2_ROOT_DIV>;
assigned-clock-parents = <&clks IMX7D_CKIL>;
assigned-clock-rates = <0>, <32768>;
};
&i2c4 {
@ -199,12 +212,13 @@
&usdhc2 { /* Wifi SDIO */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_wifi_clk>;
no-1-8-v;
non-removable;
keep-power-in-suspend;
wakeup-source;
vmmc-supply = <&reg_ap6212>;
mmc-pwrseq = <&usdhc2_pwrseq>;
status = "okay";
};
@ -301,6 +315,12 @@
};
&iomuxc_lpsr {
pinctrl_wifi_clk: wificlkgrp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x7d
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74

2
arch/arm/boot/dts/logicpd-som-lv.dtsi
View File

@ -129,7 +129,7 @@
};
&mmc3 {
interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
pinctrl-names = "default";
vmmc-supply = <&wl12xx_vmmc>;

2
arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
View File

@ -35,7 +35,7 @@
* jumpering combinations for the long run.
*/
&mmc3 {
interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
pinctrl-names = "default";
vmmc-supply = <&wl12xx_vmmc>;

6
arch/arm/boot/dts/rk3288-veyron.dtsi
View File

@ -10,7 +10,11 @@
#include "rk3288.dtsi"
/ {
memory@0 {
/*
* The default coreboot on veyron devices ignores memory@0 nodes
* and would instead create another memory node.
*/
memory {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};

2
arch/arm/boot/dts/sama5d2.dtsi
View File

@ -314,7 +314,7 @@
0x1 0x0 0x60000000 0x10000000
0x2 0x0 0x70000000 0x10000000
0x3 0x0 0x80000000 0x10000000>;
clocks = <&mck>;
clocks = <&h32ck>;
status = "disabled";
nand_controller: nand-controller {

4
arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
View File

@ -314,8 +314,8 @@
&reg_dldo3 {
regulator-always-on;
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pd";
};

5
arch/arm/configs/davinci_all_defconfig
View File

@ -167,8 +167,9 @@ CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_SOC=m
CONFIG_SND_EDMA_SOC=m
CONFIG_SND_DA850_SOC_EVM=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_DAVINCI_MCASP=m
CONFIG_SND_SOC_DAVINCI_EVM=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_HID=m
CONFIG_HID_A4TECH=m

2
arch/arm/configs/omap1_defconfig
View File

@ -175,8 +175,6 @@ CONFIG_SND_PCM_OSS=y
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_SND_DUMMY=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_SOC=y
CONFIG_SND_OMAP_SOC=y
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_PHY=y

14
arch/arm/configs/omap2plus_defconfig
View File

@ -381,13 +381,13 @@ CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_SOC=m
CONFIG_SND_EDMA_SOC=m
CONFIG_SND_AM33XX_SOC_EVM=m
CONFIG_SND_OMAP_SOC=m
CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m
CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_DAVINCI_MCASP=m
CONFIG_SND_SOC_NOKIA_RX51=m
CONFIG_SND_SOC_OMAP_HDMI=m
CONFIG_SND_SOC_OMAP_ABE_TWL6040=m
CONFIG_SND_SOC_OMAP3_PANDORA=m
CONFIG_SND_SOC_OMAP3_TWL4030=m
CONFIG_SND_SOC_CPCAP=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_SND_AUDIO_GRAPH_CARD=m

17
arch/arm/kernel/ftrace.c
View File

@ -183,9 +183,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
unsigned long frame_pointer)
{
unsigned long return_hooker = (unsigned long) &return_to_handler;
struct ftrace_graph_ent trace;
unsigned long old;
int err;
if (unlikely(atomic_read(&current->tracing_graph_pause)))
return;
@ -193,21 +191,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
old = *parent;
*parent = return_hooker;
trace.func = self_addr;
trace.depth = current->curr_ret_stack + 1;
/* Only trace if the calling function expects to */
if (!ftrace_graph_entry(&trace)) {
if (function_graph_enter(old, self_addr, frame_pointer, NULL))
*parent = old;
return;
}
err = ftrace_push_return_trace(old, self_addr, &trace.depth,
frame_pointer, NULL);
if (err == -EBUSY) {
*parent = old;
return;
}
}
#ifdef CONFIG_DYNAMIC_FTRACE

4
arch/arm/mach-davinci/board-dm365-evm.c
View File

@ -794,9 +794,9 @@ static __init void dm365_evm_init(void)
/* maybe setup mmc1/etc ... _after_ mmc0 */
evm_init_cpld();
#ifdef CONFIG_SND_DM365_AIC3X_CODEC
#ifdef CONFIG_SND_SOC_DM365_AIC3X_CODEC
dm365_init_asp();
#elif defined(CONFIG_SND_DM365_VOICE_CODEC)
#elif defined(CONFIG_SND_SOC_DM365_VOICE_CODEC)
dm365_init_vc();
#endif
dm365_init_rtc();

4
arch/arm/mach-davinci/da830.c
View File

@ -759,7 +759,9 @@ static struct davinci_id da830_ids[] = {
};
static struct davinci_gpio_platform_data da830_gpio_platform_data = {
.ngpio = 128,
.no_auto_base = true,
.base = 0,
.ngpio = 128,
};
int __init da830_register_gpio(void)

4
arch/arm/mach-davinci/da850.c
View File

@ -719,7 +719,9 @@ int __init da850_register_vpif_capture(struct vpif_capture_config
}
static struct davinci_gpio_platform_data da850_gpio_platform_data = {
.ngpio = 144,
.no_auto_base = true,
.base = 0,
.ngpio = 144,
};
int __init da850_register_gpio(void)

40
arch/arm/mach-davinci/devices-da8xx.c
View File

@ -701,6 +701,46 @@ static struct resource da8xx_gpio_resources[] = {
},
{ /* interrupt */
.start = IRQ_DA8XX_GPIO0,
.end = IRQ_DA8XX_GPIO0,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DA8XX_GPIO1,
.end = IRQ_DA8XX_GPIO1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DA8XX_GPIO2,
.end = IRQ_DA8XX_GPIO2,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DA8XX_GPIO3,
.end = IRQ_DA8XX_GPIO3,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DA8XX_GPIO4,
.end = IRQ_DA8XX_GPIO4,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DA8XX_GPIO5,
.end = IRQ_DA8XX_GPIO5,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DA8XX_GPIO6,
.end = IRQ_DA8XX_GPIO6,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DA8XX_GPIO7,
.end = IRQ_DA8XX_GPIO7,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DA8XX_GPIO8,
.end = IRQ_DA8XX_GPIO8,
.flags = IORESOURCE_IRQ,
},

32
arch/arm/mach-davinci/dm355.c
View File

@ -548,12 +548,44 @@ static struct resource dm355_gpio_resources[] = {
},
{ /* interrupt */
.start = IRQ_DM355_GPIOBNK0,
.end = IRQ_DM355_GPIOBNK0,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DM355_GPIOBNK1,
.end = IRQ_DM355_GPIOBNK1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DM355_GPIOBNK2,
.end = IRQ_DM355_GPIOBNK2,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DM355_GPIOBNK3,
.end = IRQ_DM355_GPIOBNK3,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DM355_GPIOBNK4,
.end = IRQ_DM355_GPIOBNK4,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DM355_GPIOBNK5,
.end = IRQ_DM355_GPIOBNK5,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DM355_GPIOBNK6,
.end = IRQ_DM355_GPIOBNK6,
.flags = IORESOURCE_IRQ,
},
};
static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
.no_auto_base = true,
.base = 0,
.ngpio = 104,
};

37
arch/arm/mach-davinci/dm365.c
View File

@ -267,12 +267,49 @@ static struct resource dm365_gpio_resources[] = {
},
{ /* interrupt */
.start = IRQ_DM365_GPIO0,
.end = IRQ_DM365_GPIO0,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DM365_GPIO1,
.end = IRQ_DM365_GPIO1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DM365_GPIO2,
.end = IRQ_DM365_GPIO2,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DM365_GPIO3,
.end = IRQ_DM365_GPIO3,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DM365_GPIO4,
.end = IRQ_DM365_GPIO4,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DM365_GPIO5,
.end = IRQ_DM365_GPIO5,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DM365_GPIO6,
.end = IRQ_DM365_GPIO6,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DM365_GPIO7,
.end = IRQ_DM365_GPIO7,
.flags = IORESOURCE_IRQ,
},
};
static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
.no_auto_base = true,
.base = 0,
.ngpio = 104,
.gpio_unbanked = 8,
};

22
arch/arm/mach-davinci/dm644x.c
View File

@ -492,12 +492,34 @@ static struct resource dm644_gpio_resources[] = {
},
{ /* interrupt */
.start = IRQ_GPIOBNK0,
.end = IRQ_GPIOBNK0,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_GPIOBNK1,
.end = IRQ_GPIOBNK1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_GPIOBNK2,
.end = IRQ_GPIOBNK2,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_GPIOBNK3,
.end = IRQ_GPIOBNK3,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_GPIOBNK4,
.end = IRQ_GPIOBNK4,
.flags = IORESOURCE_IRQ,
},
};
static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
.no_auto_base = true,
.base = 0,
.ngpio = 71,
};

12
arch/arm/mach-davinci/dm646x.c
View File

@ -442,12 +442,24 @@ static struct resource dm646x_gpio_resources[] = {
},
{ /* interrupt */
.start = IRQ_DM646X_GPIOBNK0,
.end = IRQ_DM646X_GPIOBNK0,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DM646X_GPIOBNK1,
.end = IRQ_DM646X_GPIOBNK1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DM646X_GPIOBNK2,
.end = IRQ_DM646X_GPIOBNK2,
.flags = IORESOURCE_IRQ,
},
};
static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
.no_auto_base = true,
.base = 0,
.ngpio = 43,
};

2
arch/arm/mach-imx/cpuidle-imx6sx.c
View File

@ -110,7 +110,7 @@ int __init imx6sx_cpuidle_init(void)
* except for power up sw2iso which need to be
* larger than LDO ramp up time.
*/
imx_gpc_set_arm_power_up_timing(2, 1);
imx_gpc_set_arm_power_up_timing(0xf, 1);
imx_gpc_set_arm_power_down_timing(1, 1);
return cpuidle_register(&imx6sx_cpuidle_driver, NULL);

6
arch/arm/mach-mmp/cputype.h
View File

@ -44,10 +44,12 @@ static inline int cpu_is_pxa910(void)
#define cpu_is_pxa910() (0)
#endif
#ifdef CONFIG_CPU_MMP2
#if defined(CONFIG_CPU_MMP2) || defined(CONFIG_MACH_MMP2_DT)
static inline int cpu_is_mmp2(void)
{
return (((read_cpuid_id() >> 8) & 0xff) == 0x58);
return (((read_cpuid_id() >> 8) & 0xff) == 0x58) &&
(((mmp_chip_id & 0xfff) == 0x410) ||
((mmp_chip_id & 0xfff) == 0x610));
}
#else
#define cpu_is_mmp2() (0)

Some files were not shown because too many files have changed in this diff Show More