From ed33ff66d8064e7b84459ad8ba49aad4cc67c269 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Fri, 30 Aug 2013 07:55:24 +0000 Subject: [PATCH] ixgbe: limit setting speed to only one at a time for QSFP modules QSFP+ modules do not support auto negotiation and should advertise only one speed at a time. This patch adds logic in ethtool to allow setting and reporting the advertised speed at either 1Gbps or 10Gbps, but not both. Also limits the speed set in ixgbe_sfp_link_config_subtask() to highest supported. Previously the link was set to whatever the supported speeds were. Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 13 +++++++++++++ drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 10 +++++++++- 2 files changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 08efc253fb8d..b41db3be9184 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -186,6 +186,11 @@ static int ixgbe_get_settings(struct net_device *netdev, ecmd->advertising |= ADVERTISED_1000baseT_Full; if (supported_link & IXGBE_LINK_SPEED_100_FULL) ecmd->advertising |= ADVERTISED_100baseT_Full; + + if (hw->phy.multispeed_fiber && !autoneg) { + if (supported_link & IXGBE_LINK_SPEED_10GB_FULL) + ecmd->advertising = ADVERTISED_10000baseT_Full; + } } if (autoneg) { @@ -314,6 +319,14 @@ static int ixgbe_set_settings(struct net_device *netdev, if (ecmd->advertising & ~ecmd->supported) return -EINVAL; + /* only allow one speed at a time if no autoneg */ + if (!ecmd->autoneg && hw->phy.multispeed_fiber) { + if (ecmd->advertising == + (ADVERTISED_10000baseT_Full | + ADVERTISED_1000baseT_Full)) + return -EINVAL; + } + old = hw->phy.autoneg_advertised; advertised = 0; if (ecmd->advertising & ADVERTISED_10000baseT_Full) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index ae267868429b..0ade0cd5ef53 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -6000,8 +6000,16 @@ static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter) adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; speed = hw->phy.autoneg_advertised; - if ((!speed) && (hw->mac.ops.get_link_capabilities)) + if ((!speed) && (hw->mac.ops.get_link_capabilities)) { hw->mac.ops.get_link_capabilities(hw, &speed, &autoneg); + + /* setup the highest link when no autoneg */ + if (!autoneg) { + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + speed = IXGBE_LINK_SPEED_10GB_FULL; + } + } + if (hw->mac.ops.setup_link) hw->mac.ops.setup_link(hw, speed, true);