mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-17 01:34:00 +08:00
mtd: SST25L (non JEDEC) SPI Flash driver
Add support for the non JEDEC SST25L SPI Flash devices. [dwmw2: Some cleanups] Signed-off-by: Andre Renaud <andre@bluewatersys.com> Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: "H Hartley Sweeten" <hartleys@visionengravers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This commit is contained in:
Ryan Mallon
David Woodhouse
parent
91e0955b57
commit
ec77e21b91
@ -104,6 +104,16 @@ config M25PXX_USE_FAST_READ
|
||||
help
|
||||
This option enables FAST_READ access supported by ST M25Pxx.
|
||||
|
||||
config MTD_SST25L
|
||||
tristate "Support SST25L (non JEDEC) SPI Flash chips"
|
||||
depends on SPI_MASTER
|
||||
help
|
||||
This enables access to the non JEDEC SST25L SPI flash chips, used
|
||||
for program and data storage.
|
||||
|
||||
Set up your spi devices with the right board-specific platform data,
|
||||
if you want to specify device partitioning.
|
||||
|
||||
config MTD_SLRAM
|
||||
tristate "Uncached system RAM"
|
||||
help
|
||||
|
||||
@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART) += lart.o
|
||||
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
|
||||
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
|
||||
obj-$(CONFIG_MTD_M25P80) += m25p80.o
|
||||
obj-$(CONFIG_MTD_SST25L) += sst25l.o
|
||||
|
||||
510
drivers/mtd/devices/sst25l.c
Normal file
510
drivers/mtd/devices/sst25l.c
Normal file
@ -0,0 +1,510 @@
|
||||
/*
|
||||
* sst25l.c
|
||||
*
|
||||
* Driver for SST25L SPI Flash chips
|
||||
*
|
||||
* Copyright © 2009 Bluewater Systems Ltd
|
||||
* Author: Andre Renaud <andre@bluewatersys.com>
|
||||
* Author: Ryan Mallon <ryan@bluewatersys.com>
|
||||
*
|
||||
* Based on m25p80.c
|
||||
*
|
||||
* This code is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/interrupt.h>
|
||||
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/flash.h>
|
||||
|
||||
/* Erases can take up to 3 seconds! */
|
||||
#define MAX_READY_WAIT_JIFFIES msecs_to_jiffies(3000)
|
||||
|
||||
#define SST25L_CMD_WRSR 0x01 /* Write status register */
|
||||
#define SST25L_CMD_WRDI 0x04 /* Write disable */
|
||||
#define SST25L_CMD_RDSR 0x05 /* Read status register */
|
||||
#define SST25L_CMD_WREN 0x06 /* Write enable */
|
||||
#define SST25L_CMD_READ 0x03 /* High speed read */
|
||||
|
||||
#define SST25L_CMD_EWSR 0x50 /* Enable write status register */
|
||||
#define SST25L_CMD_SECTOR_ERASE 0x20 /* Erase sector */
|
||||
#define SST25L_CMD_READ_ID 0x90 /* Read device ID */
|
||||
#define SST25L_CMD_AAI_PROGRAM 0xaf /* Auto address increment */
|
||||
|
||||
#define SST25L_STATUS_BUSY (1 << 0) /* Chip is busy */
|
||||
#define SST25L_STATUS_WREN (1 << 1) /* Write enabled */
|
||||
#define SST25L_STATUS_BP0 (1 << 2) /* Block protection 0 */
|
||||
#define SST25L_STATUS_BP1 (1 << 3) /* Block protection 1 */
|
||||
|
||||
struct sst25l_flash {
|
||||
struct spi_device *spi;
|
||||
struct mutex lock;
|
||||
struct mtd_info mtd;
|
||||
|
||||
int partitioned;
|
||||
};
|
||||
|
||||
struct flash_info {
|
||||
const char *name;
|
||||
uint16_t device_id;
|
||||
unsigned page_size;
|
||||
unsigned nr_pages;
|
||||
unsigned erase_size;
|
||||
};
|
||||
|
||||
#define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd)
|
||||
|
||||
static struct flash_info __initdata sst25l_flash_info[] = {
|
||||
{"sst25lf020a", 0xbf43, 256, 1024, 4096},
|
||||
{"sst25lf040a", 0xbf44, 256, 2048, 4096},
|
||||
};
|
||||
|
||||
static int sst25l_status(struct sst25l_flash *flash, int *status)
|
||||
{
|
||||
unsigned char command, response;
|
||||
int err;
|
||||
|
||||
command = SST25L_CMD_RDSR;
|
||||
err = spi_write_then_read(flash->spi, &command, 1, &response, 1);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
*status = response;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sst25l_write_enable(struct sst25l_flash *flash, int enable)
|
||||
{
|
||||
unsigned char command[2];
|
||||
int status, err;
|
||||
|
||||
command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI;
|
||||
err = spi_write(flash->spi, command, 1);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
command[0] = SST25L_CMD_EWSR;
|
||||
err = spi_write(flash->spi, command, 1);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
command[0] = SST25L_CMD_WRSR;
|
||||
command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1;
|
||||
err = spi_write(flash->spi, command, 2);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
if (enable) {
|
||||
err = sst25l_status(flash, &status);
|
||||
if (err)
|
||||
return err;
|
||||
if (!(status & SST25L_STATUS_WREN))
|
||||
return -EROFS;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sst25l_wait_till_ready(struct sst25l_flash *flash)
|
||||
{
|
||||
unsigned long deadline;
|
||||
int status, err;
|
||||
|
||||
deadline = jiffies + MAX_READY_WAIT_JIFFIES;
|
||||
do {
|
||||
err = sst25l_status(flash, &status);
|
||||
if (err)
|
||||
return err;
|
||||
if (!(status & SST25L_STATUS_BUSY))
|
||||
return 0;
|
||||
|
||||
cond_resched();
|
||||
} while (!time_after_eq(jiffies, deadline));
|
||||
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset)
|
||||
{
|
||||
unsigned char command[4];
|
||||
int err;
|
||||
|
||||
err = sst25l_write_enable(flash, 1);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
command[0] = SST25L_CMD_SECTOR_ERASE;
|
||||
command[1] = offset >> 16;
|
||||
command[2] = offset >> 8;
|
||||
command[3] = offset;
|
||||
err = spi_write(flash->spi, command, 4);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
err = sst25l_wait_till_ready(flash);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
return sst25l_write_enable(flash, 0);
|
||||
}
|
||||
|
||||
static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr)
|
||||
{
|
||||
struct sst25l_flash *flash = to_sst25l_flash(mtd);
|
||||
uint32_t addr, end;
|
||||
int err;
|
||||
|
||||
/* Sanity checks */
|
||||
if (instr->addr + instr->len > flash->mtd.size)
|
||||
return -EINVAL;
|
||||
|
||||
if ((uint32_t)instr->len % mtd->erasesize)
|
||||
return -EINVAL;
|
||||
|
||||
if ((uint32_t)instr->addr % mtd->erasesize)
|
||||
return -EINVAL;
|
||||
|
||||
addr = instr->addr;
|
||||
end = addr + instr->len;
|
||||
|
||||
mutex_lock(&flash->lock);
|
||||
|
||||
err = sst25l_wait_till_ready(flash);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
while (addr < end) {
|
||||
err = sst25l_erase_sector(flash, addr);
|
||||
if (err) {
|
||||
mutex_unlock(&flash->lock);
|
||||
instr->state = MTD_ERASE_FAILED;
|
||||
dev_err(&flash->spi->dev, "Erase failed\n");
|
||||
return err;
|
||||
}
|
||||
|
||||
addr += mtd->erasesize;
|
||||
}
|
||||
|
||||
mutex_unlock(&flash->lock);
|
||||
|
||||
instr->state = MTD_ERASE_DONE;
|
||||
mtd_erase_callback(instr);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len,
|
||||
size_t *retlen, unsigned char *buf)
|
||||
{
|
||||
struct sst25l_flash *flash = to_sst25l_flash(mtd);
|
||||
struct spi_transfer transfer[2];
|
||||
struct spi_message message;
|
||||
unsigned char command[4];
|
||||
int ret;
|
||||
|
||||
/* Sanity checking */
|
||||
if (len == 0)
|
||||
return 0;
|
||||
|
||||
if (from + len > flash->mtd.size)
|
||||
return -EINVAL;
|
||||
|
||||
if (retlen)
|
||||
*retlen = 0;
|
||||
|
||||
spi_message_init(&message);
|
||||
memset(&transfer, 0, sizeof(transfer));
|
||||
|
||||
command[0] = SST25L_CMD_READ;
|
||||
command[1] = from >> 16;
|
||||
command[2] = from >> 8;
|
||||
command[3] = from;
|
||||
|
||||
transfer[0].tx_buf = command;
|
||||
transfer[0].len = sizeof(command);
|
||||
spi_message_add_tail(&transfer[0], &message);
|
||||
|
||||
transfer[1].rx_buf = buf;
|
||||
transfer[1].len = len;
|
||||
spi_message_add_tail(&transfer[1], &message);
|
||||
|
||||
mutex_lock(&flash->lock);
|
||||
|
||||
/* Wait for previous write/erase to complete */
|
||||
ret = sst25l_wait_till_ready(flash);
|
||||
if (ret) {
|
||||
mutex_unlock(&flash->lock);
|
||||
return ret;
|
||||
}
|
||||
|
||||
spi_sync(flash->spi, &message);
|
||||
|
||||
if (retlen && message.actual_length > sizeof(command))
|
||||
*retlen += message.actual_length - sizeof(command);
|
||||
|
||||
mutex_unlock(&flash->lock);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len,
|
||||
size_t *retlen, const unsigned char *buf)
|
||||
{
|
||||
struct sst25l_flash *flash = to_sst25l_flash(mtd);
|
||||
int i, j, ret, bytes, copied = 0;
|
||||
unsigned char command[5];
|
||||
|
||||
/* Sanity checks */
|
||||
if (!len)
|
||||
return 0;
|
||||
|
||||
if (to + len > flash->mtd.size)
|
||||
return -EINVAL;
|
||||
|
||||
if ((uint32_t)to % mtd->writesize)
|
||||
return -EINVAL;
|
||||
|
||||
mutex_lock(&flash->lock);
|
||||
|
||||
ret = sst25l_write_enable(flash, 1);
|
||||
if (ret)
|
||||
goto out;
|
||||
|
||||
for (i = 0; i < len; i += mtd->writesize) {
|
||||
ret = sst25l_wait_till_ready(flash);
|
||||
if (ret)
|
||||
goto out;
|
||||
|
||||
/* Write the first byte of the page */
|
||||
command[0] = SST25L_CMD_AAI_PROGRAM;
|
||||
command[1] = (to + i) >> 16;
|
||||
command[2] = (to + i) >> 8;
|
||||
command[3] = (to + i);
|
||||
command[4] = buf[i];
|
||||
ret = spi_write(flash->spi, command, 5);
|
||||
if (ret < 0)
|
||||
goto out;
|
||||
copied++;
|
||||
|
||||
/*
|
||||
* Write the remaining bytes using auto address
|
||||
* increment mode
|
||||
*/
|
||||
bytes = min_t(uint32_t, mtd->writesize, len - i);
|
||||
for (j = 1; j < bytes; j++, copied++) {
|
||||
ret = sst25l_wait_till_ready(flash);
|
||||
if (ret)
|
||||
goto out;
|
||||
|
||||
command[1] = buf[i + j];
|
||||
ret = spi_write(flash->spi, command, 2);
|
||||
if (ret)
|
||||
goto out;
|
||||
}
|
||||
}
|
||||
|
||||
out:
|
||||
ret = sst25l_write_enable(flash, 0);
|
||||
|
||||
if (retlen)
|
||||
*retlen = copied;
|
||||
|
||||
mutex_unlock(&flash->lock);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct flash_info *__init sst25l_match_device(struct spi_device *spi)
|
||||
{
|
||||
struct flash_info *flash_info = NULL;
|
||||
unsigned char command[4], response;
|
||||
int i, err;
|
||||
uint16_t id;
|
||||
|
||||
command[0] = SST25L_CMD_READ_ID;
|
||||
command[1] = 0;
|
||||
command[2] = 0;
|
||||
command[3] = 0;
|
||||
err = spi_write_then_read(spi, command, sizeof(command), &response, 1);
|
||||
if (err < 0) {
|
||||
dev_err(&spi->dev, "error reading device id msb\n");
|
||||
return NULL;
|
||||
}
|
||||
|
||||
id = response << 8;
|
||||
|
||||
command[0] = SST25L_CMD_READ_ID;
|
||||
command[1] = 0;
|
||||
command[2] = 0;
|
||||
command[3] = 1;
|
||||
err = spi_write_then_read(spi, command, sizeof(command), &response, 1);
|
||||
if (err < 0) {
|
||||
dev_err(&spi->dev, "error reading device id lsb\n");
|
||||
return NULL;
|
||||
}
|
||||
|
||||
id |= response;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++)
|
||||
if (sst25l_flash_info[i].device_id == id)
|
||||
flash_info = &sst25l_flash_info[i];
|
||||
|
||||
if (!flash_info)
|
||||
dev_err(&spi->dev, "unknown id %.4x\n", id);
|
||||
|
||||
return flash_info;
|
||||
}
|
||||
|
||||
static int __init sst25l_probe(struct spi_device *spi)
|
||||
{
|
||||
struct flash_info *flash_info;
|
||||
struct sst25l_flash *flash;
|
||||
struct flash_platform_data *data;
|
||||
int ret, i;
|
||||
|
||||
flash_info = sst25l_match_device(spi);
|
||||
if (!flash_info)
|
||||
return -ENODEV;
|
||||
|
||||
flash = kzalloc(sizeof(struct sst25l_flash), GFP_KERNEL);
|
||||
if (!flash)
|
||||
return -ENOMEM;
|
||||
|
||||
flash->spi = spi;
|
||||
mutex_init(&flash->lock);
|
||||
dev_set_drvdata(&spi->dev, flash);
|
||||
|
||||
data = spi->dev.platform_data;
|
||||
if (data && data->name)
|
||||
flash->mtd.name = data->name;
|
||||
else
|
||||
flash->mtd.name = dev_name(&spi->dev);
|
||||
|
||||
flash->mtd.type = MTD_NORFLASH;
|
||||
flash->mtd.flags = MTD_CAP_NORFLASH;
|
||||
flash->mtd.erasesize = flash_info->erase_size;
|
||||
flash->mtd.writesize = flash_info->page_size;
|
||||
flash->mtd.size = flash_info->page_size * flash_info->nr_pages;
|
||||
flash->mtd.erase = sst25l_erase;
|
||||
flash->mtd.read = sst25l_read;
|
||||
flash->mtd.write = sst25l_write;
|
||||
|
||||
dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
|
||||
(long long)flash->mtd.size >> 10);
|
||||
|
||||
DEBUG(MTD_DEBUG_LEVEL2,
|
||||
"mtd .name = %s, .size = 0x%llx (%lldMiB) "
|
||||
".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
|
||||
flash->mtd.name,
|
||||
(long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
|
||||
flash->mtd.erasesize, flash->mtd.erasesize / 1024,
|
||||
flash->mtd.numeraseregions);
|
||||
|
||||
if (flash->mtd.numeraseregions)
|
||||
for (i = 0; i < flash->mtd.numeraseregions; i++)
|
||||
DEBUG(MTD_DEBUG_LEVEL2,
|
||||
"mtd.eraseregions[%d] = { .offset = 0x%llx, "
|
||||
".erasesize = 0x%.8x (%uKiB), "
|
||||
".numblocks = %d }\n",
|
||||
i, (long long)flash->mtd.eraseregions[i].offset,
|
||||
flash->mtd.eraseregions[i].erasesize,
|
||||
flash->mtd.eraseregions[i].erasesize / 1024,
|
||||
flash->mtd.eraseregions[i].numblocks);
|
||||
|
||||
if (mtd_has_partitions()) {
|
||||
struct mtd_partition *parts = NULL;
|
||||
int nr_parts = 0;
|
||||
|
||||
if (mtd_has_cmdlinepart()) {
|
||||
static const char *part_probes[] =
|
||||
{"cmdlinepart", NULL};
|
||||
|
||||
nr_parts = parse_mtd_partitions(&flash->mtd,
|
||||
part_probes,
|
||||
&parts, 0);
|
||||
}
|
||||
|
||||
if (nr_parts <= 0 && data && data->parts) {
|
||||
parts = data->parts;
|
||||
nr_parts = data->nr_parts;
|
||||
}
|
||||
|
||||
if (nr_parts > 0) {
|
||||
for (i = 0; i < nr_parts; i++) {
|
||||
DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
|
||||
"{.name = %s, .offset = 0x%llx, "
|
||||
".size = 0x%llx (%lldKiB) }\n",
|
||||
i, parts[i].name,
|
||||
(long long)parts[i].offset,
|
||||
(long long)parts[i].size,
|
||||
(long long)(parts[i].size >> 10));
|
||||
}
|
||||
|
||||
flash->partitioned = 1;
|
||||
return add_mtd_partitions(&flash->mtd,
|
||||
parts, nr_parts);
|
||||
}
|
||||
|
||||
} else if (data->nr_parts) {
|
||||
dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
|
||||
data->nr_parts, data->name);
|
||||
}
|
||||
|
||||
ret = add_mtd_device(&flash->mtd);
|
||||
if (ret == 1) {
|
||||
kfree(flash);
|
||||
dev_set_drvdata(&spi->dev, NULL);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __exit sst25l_remove(struct spi_device *spi)
|
||||
{
|
||||
struct sst25l_flash *flash = dev_get_drvdata(&spi->dev);
|
||||
int ret;
|
||||
|
||||
if (mtd_has_partitions() && flash->partitioned)
|
||||
ret = del_mtd_partitions(&flash->mtd);
|
||||
else
|
||||
ret = del_mtd_device(&flash->mtd);
|
||||
if (ret == 0)
|
||||
kfree(flash);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct spi_driver sst25l_driver = {
|
||||
.driver = {
|
||||
.name = "sst25l",
|
||||
.bus = &spi_bus_type,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = sst25l_probe,
|
||||
.remove = __exit_p(sst25l_remove),
|
||||
};
|
||||
|
||||
static int __init sst25l_init(void)
|
||||
{
|
||||
return spi_register_driver(&sst25l_driver);
|
||||
}
|
||||
|
||||
static void __exit sst25l_exit(void)
|
||||
{
|
||||
spi_unregister_driver(&sst25l_driver);
|
||||
}
|
||||
|
||||
module_init(sst25l_init);
|
||||
module_exit(sst25l_exit);
|
||||
|
||||
MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips");
|
||||
MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, "
|
||||
"Ryan Mallon <ryan@bluewatersys.com>");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user