2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-16 09:13:55 +08:00

ARM: SoC driver updates

- New SoC specific drivers
   - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later)
     based on the "BPMP" firmware
   - Clocksource and system controller drivers for the newly added
     Action Semi platforms (both arm and arm64).
 
 - Reset subsystem, merged through arm-soc by tradition:
   - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini SoCs
   - Various subsystem-wide cleanups
 
 - Updates for existing SoC-specific drivers
   - TI GPMC (General Purpose Memory Controller)
   - Mediatek "scpsys" system controller support for MT6797
   - Broadcom "brcmstb_gisb" bus arbitrer
   - ARM SCPI firmware
   - Renesas "SYSC" system controller
 
 One more driver update was submitted for the Freescale/NXP DPAA
 data path acceleration that has previously been used on PowerPC
 chips. I ended up postponing the merge until some API questions
 for its unusual MMIO access are resolved.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWVpDFmCrR//JCVInAQKoihAAosgC3+3IHppOhHid+HepkOcp2teyKknw
 42fSXVpTdfWa8Oe7q80Kzmz2CPNfFq2SzHz6oXb9WCcDFqSGr0b9aSE7NnksRjTf
 2euHVJ4MnJpkRewvorRmcpK8dPXDcHwEw/8hU3yZtJUGI0IKtlrqXis+evgkz9cn
 YDynuVdAZgZiEfiNeSeadyNLcxaQCc3x9ovvsBXxBa1/x1pfeRnTbp+6hiHilCJu
 Szts/yAzZzZE9Jkf9dLKfNlsT6m2SgtjukqqOR+zHAhi7/BdTFSVUP6L8u7QjrR+
 +ijTICg8FMJGiWLAOe6ED2qZVByN92EJ2AGwriYlSles9ouoGfRkJ2rwxyjbete7
 avy0HP+PSBFXWdwbOcq8HX8CrbuBltagl5fkMokct6biWLLMshNZ33WWdQ6/DsM2
 b9mAAZuhbs0g1qWUBD3+q6qBytSuGme6Px6fMoVEc4GQ2YVFUQOoEfZOGKRv1U1o
 aMWGt/6qeF8SG288rYAnQ/TuYWpOLtksV6yhotA00HUHhkTCy0xVCdyWGZtNyKhG
 o/x4YnhWFzHsXmqKcR1sM7LzfZY/WNmbrOLvK6i83Z0P7QptqrdaLAylL3iSPEyX
 ZDUgExf6PYXkWIewc3KwC5sJjuD05z3ZCgIR+mCezwbuD+3Z2fOdjodY/VBZ74hq
 URcM/BqtuWE=
 =5L6n
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "New SoC specific drivers:

   - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later)
     based on the "BPMP" firmware

   - Clocksource and system controller drivers for the newly added
     Action Semi platforms (both arm and arm64).

  Reset subsystem, merged through arm-soc by tradition:

   - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini
     SoCs

   - Various subsystem-wide cleanups

  Updates for existing SoC-specific drivers

   - TI GPMC (General Purpose Memory Controller)

   - Mediatek "scpsys" system controller support for MT6797

   - Broadcom "brcmstb_gisb" bus arbitrer

   - ARM SCPI firmware

   - Renesas "SYSC" system controller

  One more driver update was submitted for the Freescale/NXP DPAA data
  path acceleration that has previously been used on PowerPC chips. I
  ended up postponing the merge until some API questions for its unusual
  MMIO access are resolved"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
  clocksource: owl: Add S900 support
  clocksource: Add Owl timer
  soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON
  firmware: tegra: Fix locking bugs in BPMP
  soc/tegra: flowctrl: Fix error handling
  soc/tegra: bpmp: Implement generic PM domains
  soc/tegra: bpmp: Update ABI header
  PM / Domains: Allow overriding the ->xlate() callback
  soc: brcmstb: enable drivers for ARM64 and BMIPS
  soc: renesas: Rework Kconfig and Makefile logic
  reset: Add the TI SCI reset driver
  dt-bindings: reset: Add TI SCI reset binding
  reset: use kref for reference counting
  soc: qcom: smsm: Improve error handling, quiesce probe deferral
  cpufreq: scpi: use new scpi_ops functions to remove duplicate code
  firmware: arm_scpi: add support to populate OPPs and get transition latency
  dt-bindings: reset: Add reset manager offsets for Stratix10
  memory: omap-gpmc: add error message if bank-width property is absent
  memory: omap-gpmc: make dts snippet include semicolon
  reset: Add a Gemini reset controller
  ...
This commit is contained in:
Linus Torvalds 2017-07-04 14:47:47 -07:00
commit e854711291
42 changed files with 2062 additions and 201 deletions

View File

@ -3,7 +3,8 @@ Broadcom GISB bus Arbiter controller
Required properties:
- compatible:
"brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for 28nm chips
"brcm,bcm7278-gisb-arb" for V7 28nm chips
"brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for other 28nm chips
"brcm,bcm7435-gisb-arb" for newer 40nm chips
"brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips
"brcm,bcm7038-gisb-arb" for 130nm chips

View File

@ -0,0 +1,62 @@
Texas Instruments System Control Interface (TI-SCI) Reset Controller
=====================================================================
Some TI SoCs contain a system controller (like the Power Management Micro
Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
the state of the various hardware modules present on the SoC. Communication
between the host processor running an OS and the system controller happens
through a protocol called TI System Control Interface (TI-SCI protocol).
For TI SCI details, please refer to the document,
Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
TI-SCI Reset Controller Node
============================
This reset controller node uses the TI SCI protocol to perform the reset
management of various hardware modules present on the SoC. Must be a child
node of the associated TI-SCI system controller node.
Required properties:
--------------------
- compatible : Should be "ti,sci-reset"
- #reset-cells : Should be 2. Please see the reset consumer node below for
usage details.
TI-SCI Reset Consumer Nodes
===========================
Each of the reset consumer nodes should have the following properties,
in addition to their own properties.
Required properties:
--------------------
- resets : A phandle and reset specifier pair, one pair for each reset
signal that affects the device, or that the device manages.
The phandle should point to the TI-SCI reset controller node,
and the reset specifier should have 2 cell-values. The first
cell should contain the device ID. The second cell should
contain the reset mask value used by system controller.
Please refer to the protocol documentation for these values
to be used for different devices,
http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data
Please also refer to Documentation/devicetree/bindings/reset/reset.txt for
common reset controller usage by consumers.
Example:
--------
The following example demonstrates both a TI-SCI reset controller node and a
consumer (a DSP device) on the 66AK2G SoC.
pmmc: pmmc {
compatible = "ti,k2g-sci";
k2g_reset: reset-controller {
compatible = "ti,sci-reset";
#reset-cells = <2>;
};
};
dsp0: dsp@10800000 {
...
resets = <&k2g_reset 0x0046 0x1>;
...
};

View File

@ -12682,6 +12682,8 @@ F: include/linux/soc/ti/ti_sci_protocol.h
F: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
F: include/dt-bindings/genpd/k2g.h
F: drivers/soc/ti/ti_sci_pm_domains.c
F: Documentation/devicetree/bindings/reset/ti,sci-reset.txt
F: drivers/reset/reset-ti-sci.c
THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>

View File

@ -1637,9 +1637,6 @@ EXPORT_SYMBOL_GPL(pm_genpd_remove);
#ifdef CONFIG_PM_GENERIC_DOMAINS_OF
typedef struct generic_pm_domain *(*genpd_xlate_t)(struct of_phandle_args *args,
void *data);
/*
* Device Tree based PM domain providers.
*
@ -1795,6 +1792,9 @@ int of_genpd_add_provider_onecell(struct device_node *np,
mutex_lock(&gpd_list_lock);
if (!data->xlate)
data->xlate = genpd_xlate_onecell;
for (i = 0; i < data->num_domains; i++) {
if (!data->domains[i])
continue;
@ -1805,7 +1805,7 @@ int of_genpd_add_provider_onecell(struct device_node *np,
data->domains[i]->has_provider = true;
}
ret = genpd_add_provider(np, genpd_xlate_onecell, data);
ret = genpd_add_provider(np, data->xlate, data);
if (ret < 0)
goto error;

View File

@ -57,7 +57,7 @@ config ARM_CCN
config BRCMSTB_GISB_ARB
bool "Broadcom STB GISB bus arbiter"
depends on ARM || MIPS
depends on ARM || ARM64 || MIPS
default ARCH_BRCMSTB || BMIPS_GENERIC
help
Driver for the Broadcom Set Top Box System-on-a-chip internal bus

View File

@ -1,5 +1,5 @@
/*
* Copyright (C) 2014 Broadcom Corporation
* Copyright (C) 2014-2017 Broadcom
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -24,11 +24,9 @@
#include <linux/of.h>
#include <linux/bitops.h>
#include <linux/pm.h>
#ifdef CONFIG_ARM
#include <asm/bug.h>
#include <asm/signal.h>
#endif
#include <linux/kernel.h>
#include <linux/kdebug.h>
#include <linux/notifier.h>
#ifdef CONFIG_MIPS
#include <asm/traps.h>
@ -37,8 +35,6 @@
#define ARB_ERR_CAP_CLEAR (1 << 0)
#define ARB_ERR_CAP_STATUS_TIMEOUT (1 << 12)
#define ARB_ERR_CAP_STATUS_TEA (1 << 11)
#define ARB_ERR_CAP_STATUS_BS_SHIFT (1 << 2)
#define ARB_ERR_CAP_STATUS_BS_MASK 0x3c
#define ARB_ERR_CAP_STATUS_WRITE (1 << 1)
#define ARB_ERR_CAP_STATUS_VALID (1 << 0)
@ -47,7 +43,6 @@ enum {
ARB_ERR_CAP_CLR,
ARB_ERR_CAP_HI_ADDR,
ARB_ERR_CAP_ADDR,
ARB_ERR_CAP_DATA,
ARB_ERR_CAP_STATUS,
ARB_ERR_CAP_MASTER,
};
@ -57,17 +52,24 @@ static const int gisb_offsets_bcm7038[] = {
[ARB_ERR_CAP_CLR] = 0x0c4,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x0c8,
[ARB_ERR_CAP_DATA] = 0x0cc,
[ARB_ERR_CAP_STATUS] = 0x0d0,
[ARB_ERR_CAP_MASTER] = -1,
};
static const int gisb_offsets_bcm7278[] = {
[ARB_TIMER] = 0x008,
[ARB_ERR_CAP_CLR] = 0x7f8,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x7e0,
[ARB_ERR_CAP_STATUS] = 0x7f0,
[ARB_ERR_CAP_MASTER] = 0x7f4,
};
static const int gisb_offsets_bcm7400[] = {
[ARB_TIMER] = 0x00c,
[ARB_ERR_CAP_CLR] = 0x0c8,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x0cc,
[ARB_ERR_CAP_DATA] = 0x0d0,
[ARB_ERR_CAP_STATUS] = 0x0d4,
[ARB_ERR_CAP_MASTER] = 0x0d8,
};
@ -77,7 +79,6 @@ static const int gisb_offsets_bcm7435[] = {
[ARB_ERR_CAP_CLR] = 0x168,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x16c,
[ARB_ERR_CAP_DATA] = 0x170,
[ARB_ERR_CAP_STATUS] = 0x174,
[ARB_ERR_CAP_MASTER] = 0x178,
};
@ -87,7 +88,6 @@ static const int gisb_offsets_bcm7445[] = {
[ARB_ERR_CAP_CLR] = 0x7e4,
[ARB_ERR_CAP_HI_ADDR] = 0x7e8,
[ARB_ERR_CAP_ADDR] = 0x7ec,
[ARB_ERR_CAP_DATA] = 0x7f0,
[ARB_ERR_CAP_STATUS] = 0x7f4,
[ARB_ERR_CAP_MASTER] = 0x7f8,
};
@ -109,9 +109,13 @@ static u32 gisb_read(struct brcmstb_gisb_arb_device *gdev, int reg)
{
int offset = gdev->gisb_offsets[reg];
/* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
if (offset == -1)
return 1;
if (offset < 0) {
/* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
if (reg == ARB_ERR_CAP_MASTER)
return 1;
else
return 0;
}
if (gdev->big_endian)
return ioread32be(gdev->base + offset);
@ -119,6 +123,16 @@ static u32 gisb_read(struct brcmstb_gisb_arb_device *gdev, int reg)
return ioread32(gdev->base + offset);
}
static u64 gisb_read_address(struct brcmstb_gisb_arb_device *gdev)
{
u64 value;
value = gisb_read(gdev, ARB_ERR_CAP_ADDR);
value |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
return value;
}
static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
{
int offset = gdev->gisb_offsets[reg];
@ -127,9 +141,9 @@ static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
return;
if (gdev->big_endian)
iowrite32be(val, gdev->base + reg);
iowrite32be(val, gdev->base + offset);
else
iowrite32(val, gdev->base + reg);
iowrite32(val, gdev->base + offset);
}
static ssize_t gisb_arb_get_timeout(struct device *dev,
@ -185,7 +199,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
const char *reason)
{
u32 cap_status;
unsigned long arb_addr;
u64 arb_addr;
u32 master;
const char *m_name;
char m_fmt[11];
@ -197,10 +211,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
return 1;
/* Read the address and master */
arb_addr = gisb_read(gdev, ARB_ERR_CAP_ADDR) & 0xffffffff;
#if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT))
arb_addr |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
#endif
arb_addr = gisb_read_address(gdev);
master = gisb_read(gdev, ARB_ERR_CAP_MASTER);
m_name = brcmstb_gisb_master_to_str(gdev, master);
@ -209,7 +220,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
m_name = m_fmt;
}
pr_crit("%s: %s at 0x%lx [%c %s], core: %s\n",
pr_crit("%s: %s at 0x%llx [%c %s], core: %s\n",
__func__, reason, arb_addr,
cap_status & ARB_ERR_CAP_STATUS_WRITE ? 'W' : 'R',
cap_status & ARB_ERR_CAP_STATUS_TIMEOUT ? "timeout" : "",
@ -221,27 +232,6 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
return 0;
}
#ifdef CONFIG_ARM
static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
int ret = 0;
struct brcmstb_gisb_arb_device *gdev;
/* iterate over each GISB arb registered handlers */
list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next)
ret |= brcmstb_gisb_arb_decode_addr(gdev, "bus error");
/*
* If it was an imprecise abort, then we need to correct the
* return address to be _after_ the instruction.
*/
if (fsr & (1 << 10))
regs->ARM_pc += 4;
return ret;
}
#endif
#ifdef CONFIG_MIPS
static int brcmstb_bus_error_handler(struct pt_regs *regs, int is_fixup)
{
@ -279,6 +269,36 @@ static irqreturn_t brcmstb_gisb_tea_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
/*
* Dump out gisb errors on die or panic.
*/
static int dump_gisb_error(struct notifier_block *self, unsigned long v,
void *p);
static struct notifier_block gisb_die_notifier = {
.notifier_call = dump_gisb_error,
};
static struct notifier_block gisb_panic_notifier = {
.notifier_call = dump_gisb_error,
};
static int dump_gisb_error(struct notifier_block *self, unsigned long v,
void *p)
{
struct brcmstb_gisb_arb_device *gdev;
const char *reason = "panic";
if (self == &gisb_die_notifier)
reason = "die";
/* iterate over each GISB arb registered handlers */
list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next)
brcmstb_gisb_arb_decode_addr(gdev, reason);
return NOTIFY_DONE;
}
static DEVICE_ATTR(gisb_arb_timeout, S_IWUSR | S_IRUGO,
gisb_arb_get_timeout, gisb_arb_set_timeout);
@ -296,6 +316,7 @@ static const struct of_device_id brcmstb_gisb_arb_of_match[] = {
{ .compatible = "brcm,bcm7445-gisb-arb", .data = gisb_offsets_bcm7445 },
{ .compatible = "brcm,bcm7435-gisb-arb", .data = gisb_offsets_bcm7435 },
{ .compatible = "brcm,bcm7400-gisb-arb", .data = gisb_offsets_bcm7400 },
{ .compatible = "brcm,bcm7278-gisb-arb", .data = gisb_offsets_bcm7278 },
{ .compatible = "brcm,bcm7038-gisb-arb", .data = gisb_offsets_bcm7038 },
{ },
};
@ -378,14 +399,16 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
list_add_tail(&gdev->next, &brcmstb_gisb_arb_device_list);
#ifdef CONFIG_ARM
hook_fault_code(22, brcmstb_bus_error_handler, SIGBUS, 0,
"imprecise external abort");
#endif
#ifdef CONFIG_MIPS
board_be_handler = brcmstb_bus_error_handler;
#endif
if (list_is_singular(&brcmstb_gisb_arb_device_list)) {
register_die_notifier(&gisb_die_notifier);
atomic_notifier_chain_register(&panic_notifier_list,
&gisb_panic_notifier);
}
dev_info(&pdev->dev, "registered mem: %p, irqs: %d, %d\n",
gdev->base, timeout_irq, tea_irq);

View File

@ -103,6 +103,13 @@ config ORION_TIMER
help
Enables the support for the Orion timer driver
config OWL_TIMER
bool "Owl timer driver" if COMPILE_TEST
depends on GENERIC_CLOCKEVENTS
select CLKSRC_MMIO
help
Enables the support for the Actions Semi Owl timer driver.
config SUN4I_TIMER
bool "Sun4i timer driver" if COMPILE_TEST
depends on GENERIC_CLOCKEVENTS

View File

@ -52,6 +52,7 @@ obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o
obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
obj-$(CONFIG_CLKSRC_NPS) += timer-nps.o
obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o
obj-$(CONFIG_OWL_TIMER) += owl-timer.o
obj-$(CONFIG_ARC_TIMERS) += arc_timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o

View File

@ -0,0 +1,172 @@
/*
* Actions Semi Owl timer
*
* Copyright 2012 Actions Semi Inc.
* Author: Actions Semi, Inc.
*
* Copyright (c) 2017 SUSE Linux GmbH
* Author: Andreas Färber
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqreturn.h>
#include <linux/sched_clock.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#define OWL_Tx_CTL 0x0
#define OWL_Tx_CMP 0x4
#define OWL_Tx_VAL 0x8
#define OWL_Tx_CTL_PD BIT(0)
#define OWL_Tx_CTL_INTEN BIT(1)
#define OWL_Tx_CTL_EN BIT(2)
static void __iomem *owl_timer_base;
static void __iomem *owl_clksrc_base;
static void __iomem *owl_clkevt_base;
static inline void owl_timer_reset(void __iomem *base)
{
writel(0, base + OWL_Tx_CTL);
writel(0, base + OWL_Tx_VAL);
writel(0, base + OWL_Tx_CMP);
}
static inline void owl_timer_set_enabled(void __iomem *base, bool enabled)
{
u32 ctl = readl(base + OWL_Tx_CTL);
/* PD bit is cleared when set */
ctl &= ~OWL_Tx_CTL_PD;
if (enabled)
ctl |= OWL_Tx_CTL_EN;
else
ctl &= ~OWL_Tx_CTL_EN;
writel(ctl, base + OWL_Tx_CTL);
}
static u64 notrace owl_timer_sched_read(void)
{
return (u64)readl(owl_clksrc_base + OWL_Tx_VAL);
}
static int owl_timer_set_state_shutdown(struct clock_event_device *evt)
{
owl_timer_set_enabled(owl_clkevt_base, false);
return 0;
}
static int owl_timer_set_state_oneshot(struct clock_event_device *evt)
{
owl_timer_reset(owl_clkevt_base);
return 0;
}
static int owl_timer_tick_resume(struct clock_event_device *evt)
{
return 0;
}
static int owl_timer_set_next_event(unsigned long evt,
struct clock_event_device *ev)
{
void __iomem *base = owl_clkevt_base;
owl_timer_set_enabled(base, false);
writel(OWL_Tx_CTL_INTEN, base + OWL_Tx_CTL);
writel(0, base + OWL_Tx_VAL);
writel(evt, base + OWL_Tx_CMP);
owl_timer_set_enabled(base, true);
return 0;
}
static struct clock_event_device owl_clockevent = {
.name = "owl_tick",
.rating = 200,
.features = CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_DYNIRQ,
.set_state_shutdown = owl_timer_set_state_shutdown,
.set_state_oneshot = owl_timer_set_state_oneshot,
.tick_resume = owl_timer_tick_resume,
.set_next_event = owl_timer_set_next_event,
};
static irqreturn_t owl_timer1_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = (struct clock_event_device *)dev_id;
writel(OWL_Tx_CTL_PD, owl_clkevt_base + OWL_Tx_CTL);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static int __init owl_timer_init(struct device_node *node)
{
struct clk *clk;
unsigned long rate;
int timer1_irq, ret;
owl_timer_base = of_io_request_and_map(node, 0, "owl-timer");
if (IS_ERR(owl_timer_base)) {
pr_err("Can't map timer registers");
return PTR_ERR(owl_timer_base);
}
owl_clksrc_base = owl_timer_base + 0x08;
owl_clkevt_base = owl_timer_base + 0x14;
timer1_irq = of_irq_get_byname(node, "timer1");
if (timer1_irq <= 0) {
pr_err("Can't parse timer1 IRQ");
return -EINVAL;
}
clk = of_clk_get(node, 0);
if (IS_ERR(clk))
return PTR_ERR(clk);
rate = clk_get_rate(clk);
owl_timer_reset(owl_clksrc_base);
owl_timer_set_enabled(owl_clksrc_base, true);
sched_clock_register(owl_timer_sched_read, 32, rate);
clocksource_mmio_init(owl_clksrc_base + OWL_Tx_VAL, node->name,
rate, 200, 32, clocksource_mmio_readl_up);
owl_timer_reset(owl_clkevt_base);
ret = request_irq(timer1_irq, owl_timer1_interrupt, IRQF_TIMER,
"owl-timer", &owl_clockevent);
if (ret) {
pr_err("failed to request irq %d\n", timer1_irq);
return ret;
}
owl_clockevent.cpumask = cpumask_of(0);
owl_clockevent.irq = timer1_irq;
clockevents_config_and_register(&owl_clockevent, rate,
0xf, 0xffffffff);
return 0;
}
CLOCKSOURCE_OF_DECLARE(owl_s500, "actions,s500-timer", owl_timer_init);
CLOCKSOURCE_OF_DECLARE(owl_s900, "actions,s900-timer", owl_timer_init);

View File

@ -30,46 +30,20 @@
static struct scpi_ops *scpi_ops;
static struct scpi_dvfs_info *scpi_get_dvfs_info(struct device *cpu_dev)
{
int domain = topology_physical_package_id(cpu_dev->id);
if (domain < 0)
return ERR_PTR(-EINVAL);
return scpi_ops->dvfs_get_info(domain);
}
static int scpi_get_transition_latency(struct device *cpu_dev)
{
struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
if (IS_ERR(info))
return PTR_ERR(info);
return info->latency;
return scpi_ops->get_transition_latency(cpu_dev);
}
static int scpi_init_opp_table(const struct cpumask *cpumask)
{
int idx, ret;
struct scpi_opp *opp;
int ret;
struct device *cpu_dev = get_cpu_device(cpumask_first(cpumask));
struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
if (IS_ERR(info))
return PTR_ERR(info);
if (!info->opps)
return -EIO;
for (opp = info->opps, idx = 0; idx < info->count; idx++, opp++) {
ret = dev_pm_opp_add(cpu_dev, opp->freq, opp->m_volt * 1000);
if (ret) {
dev_warn(cpu_dev, "failed to add opp %uHz %umV\n",
opp->freq, opp->m_volt);
while (idx-- > 0)
dev_pm_opp_remove(cpu_dev, (--opp)->freq);
return ret;
}
ret = scpi_ops->add_opps_to_device(cpu_dev);
if (ret) {
dev_warn(cpu_dev, "failed to add opps to the device\n");
return ret;
}
ret = dev_pm_opp_set_sharing_cpus(cpu_dev, cpumask);

View File

@ -39,6 +39,7 @@
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/printk.h>
#include <linux/pm_opp.h>
#include <linux/scpi_protocol.h>
#include <linux/slab.h>
#include <linux/sort.h>
@ -684,6 +685,65 @@ static struct scpi_dvfs_info *scpi_dvfs_get_info(u8 domain)
return info;
}
static int scpi_dev_domain_id(struct device *dev)
{
struct of_phandle_args clkspec;
if (of_parse_phandle_with_args(dev->of_node, "clocks", "#clock-cells",
0, &clkspec))
return -EINVAL;
return clkspec.args[0];
}
static struct scpi_dvfs_info *scpi_dvfs_info(struct device *dev)
{
int domain = scpi_dev_domain_id(dev);
if (domain < 0)
return ERR_PTR(domain);
return scpi_dvfs_get_info(domain);
}
static int scpi_dvfs_get_transition_latency(struct device *dev)
{
struct scpi_dvfs_info *info = scpi_dvfs_info(dev);
if (IS_ERR(info))
return PTR_ERR(info);
if (!info->latency)
return 0;
return info->latency;
}
static int scpi_dvfs_add_opps_to_device(struct device *dev)
{
int idx, ret;
struct scpi_opp *opp;
struct scpi_dvfs_info *info = scpi_dvfs_info(dev);
if (IS_ERR(info))
return PTR_ERR(info);
if (!info->opps)
return -EIO;
for (opp = info->opps, idx = 0; idx < info->count; idx++, opp++) {
ret = dev_pm_opp_add(dev, opp->freq, opp->m_volt * 1000);
if (ret) {
dev_warn(dev, "failed to add opp %uHz %umV\n",
opp->freq, opp->m_volt);
while (idx-- > 0)
dev_pm_opp_remove(dev, (--opp)->freq);
return ret;
}
}
return 0;
}
static int scpi_sensor_get_capability(u16 *sensors)
{
struct sensor_capabilities cap_buf;
@ -765,6 +825,9 @@ static struct scpi_ops scpi_ops = {
.dvfs_get_idx = scpi_dvfs_get_idx,
.dvfs_set_idx = scpi_dvfs_set_idx,
.dvfs_get_info = scpi_dvfs_get_info,
.device_domain_id = scpi_dev_domain_id,
.get_transition_latency = scpi_dvfs_get_transition_latency,
.add_opps_to_device = scpi_dvfs_add_opps_to_device,
.sensor_get_capability = scpi_sensor_get_capability,
.sensor_get_info = scpi_sensor_get_info,
.sensor_get_value = scpi_sensor_get_value,

View File

@ -211,14 +211,17 @@ static ssize_t tegra_bpmp_channel_read(struct tegra_bpmp_channel *channel,
int index;
index = tegra_bpmp_channel_get_thread_index(channel);
if (index < 0)
return index;
if (index < 0) {
err = index;
goto unlock;
}
spin_lock_irqsave(&bpmp->lock, flags);
err = __tegra_bpmp_channel_read(channel, data, size);
clear_bit(index, bpmp->threaded.allocated);
spin_unlock_irqrestore(&bpmp->lock, flags);
unlock:
up(&bpmp->threaded.lock);
return err;
@ -256,18 +259,18 @@ tegra_bpmp_write_threaded(struct tegra_bpmp *bpmp, unsigned int mrq,
index = find_first_zero_bit(bpmp->threaded.allocated, count);
if (index == count) {
channel = ERR_PTR(-EBUSY);
err = -EBUSY;
goto unlock;
}
channel = tegra_bpmp_channel_get_thread(bpmp, index);
if (!channel) {
channel = ERR_PTR(-EINVAL);
err = -EINVAL;
goto unlock;
}
if (!tegra_bpmp_master_free(channel)) {
channel = ERR_PTR(-EBUSY);
err = -EBUSY;
goto unlock;
}
@ -275,16 +278,21 @@ tegra_bpmp_write_threaded(struct tegra_bpmp *bpmp, unsigned int mrq,
err = __tegra_bpmp_channel_write(channel, mrq, MSG_ACK | MSG_RING,
data, size);
if (err < 0) {
clear_bit(index, bpmp->threaded.allocated);
goto unlock;
}
if (err < 0)
goto clear_allocated;
set_bit(index, bpmp->threaded.busy);
unlock:
spin_unlock_irqrestore(&bpmp->lock, flags);
return channel;
clear_allocated:
clear_bit(index, bpmp->threaded.allocated);
unlock:
spin_unlock_irqrestore(&bpmp->lock, flags);
up(&bpmp->threaded.lock);
return ERR_PTR(err);
}
static ssize_t tegra_bpmp_channel_write(struct tegra_bpmp_channel *channel,
@ -810,6 +818,10 @@ static int tegra_bpmp_probe(struct platform_device *pdev)
if (err < 0)
goto free_mrq;
err = tegra_bpmp_init_powergates(bpmp);
if (err < 0)
goto free_mrq;
platform_set_drvdata(pdev, bpmp);
return 0;

View File

@ -460,12 +460,12 @@ static int get_gpmc_timing_reg(
if (l)
time_ns_min = gpmc_clk_ticks_to_ns(l - 1, cs, cd) + 1;
time_ns = gpmc_clk_ticks_to_ns(l, cs, cd);
pr_info("gpmc,%s = <%u> /* %u ns - %u ns; %i ticks%s*/\n",
pr_info("gpmc,%s = <%u>; /* %u ns - %u ns; %i ticks%s*/\n",
name, time_ns, time_ns_min, time_ns, l,
invalid ? "; invalid " : " ");
} else {
/* raw format */
pr_info("gpmc,%s = <%u>%s\n", name, l,
pr_info("gpmc,%s = <%u>;%s\n", name, l,
invalid ? " /* invalid */" : "");
}
@ -2083,8 +2083,11 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
} else {
ret = of_property_read_u32(child, "bank-width",
&gpmc_s.device_width);
if (ret < 0)
if (ret < 0) {
dev_err(&pdev->dev, "%s has no 'bank-width' property\n",
child->full_name);
goto err;
}
}
/* Reserve wait pin if it is required and valid */

View File

@ -34,6 +34,13 @@ config RESET_BERLIN
help
This enables the reset controller driver for Marvell Berlin SoCs.
config RESET_GEMINI
bool "Gemini Reset Driver" if COMPILE_TEST
default ARCH_GEMINI
select MFD_SYSCON
help
This enables the reset controller driver for Cortina Systems Gemini.
config RESET_IMX7
bool "i.MX7 Reset Driver" if COMPILE_TEST
default SOC_IMX7D
@ -80,7 +87,15 @@ config RESET_SUNXI
help
This enables the reset driver for Allwinner SoCs.
config TI_SYSCON_RESET
config RESET_TI_SCI
tristate "TI System Control Interface (TI-SCI) reset driver"
depends on TI_SCI_PROTOCOL
help
This enables the reset driver support over TI System Control Interface
available on some new TI's SoCs. If you wish to use reset resources
managed by the TI System Controller, say Y here. Otherwise, say N.
config RESET_TI_SYSCON
tristate "TI SYSCON Reset Driver"
depends on HAS_IOMEM
select MFD_SYSCON

View File

@ -5,6 +5,7 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o
obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
obj-$(CONFIG_RESET_GEMINI) += reset-gemini.o
obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_RESET_MESON) += reset-meson.o
@ -13,7 +14,8 @@ obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_RESET_STM32) += reset-stm32.o
obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
obj-$(CONFIG_RESET_ZX2967) += reset-zx2967.o
obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o

View File

@ -13,6 +13,7 @@
#include <linux/err.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/kref.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/reset.h>
@ -40,7 +41,7 @@ struct reset_control {
struct reset_controller_dev *rcdev;
struct list_head list;
unsigned int id;
unsigned int refcnt;
struct kref refcnt;
bool shared;
atomic_t deassert_count;
atomic_t triggered_count;
@ -288,7 +289,7 @@ static struct reset_control *__reset_control_get_internal(
if (WARN_ON(!rstc->shared || !shared))
return ERR_PTR(-EBUSY);
rstc->refcnt++;
kref_get(&rstc->refcnt);
return rstc;
}
}
@ -302,23 +303,30 @@ static struct reset_control *__reset_control_get_internal(
rstc->rcdev = rcdev;
list_add(&rstc->list, &rcdev->reset_control_head);
rstc->id = index;
rstc->refcnt = 1;
kref_init(&rstc->refcnt);
rstc->shared = shared;
return rstc;
}
static void __reset_control_release(struct kref *kref)
{
struct reset_control *rstc = container_of(kref, struct reset_control,
refcnt);
lockdep_assert_held(&reset_list_mutex);
module_put(rstc->rcdev->owner);
list_del(&rstc->list);
kfree(rstc);
}
static void __reset_control_put_internal(struct reset_control *rstc)
{
lockdep_assert_held(&reset_list_mutex);
if (--rstc->refcnt)
return;
module_put(rstc->rcdev->owner);
list_del(&rstc->list);
kfree(rstc);
kref_put(&rstc->refcnt, __reset_control_release);
}
struct reset_control *__of_reset_control_get(struct device_node *node,
@ -400,7 +408,6 @@ EXPORT_SYMBOL_GPL(__reset_control_get);
* reset_control_put - free the reset controller
* @rstc: reset controller
*/
void reset_control_put(struct reset_control *rstc)
{
if (IS_ERR_OR_NULL(rstc))

View File

@ -0,0 +1,110 @@
/*
* Cortina Gemini Reset controller driver
* Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/err.h>
#include <linux/init.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <dt-bindings/reset/cortina,gemini-reset.h>
/**
* struct gemini_reset - gemini reset controller
* @map: regmap to access the containing system controller
* @rcdev: reset controller device
*/
struct gemini_reset {
struct regmap *map;
struct reset_controller_dev rcdev;
};
#define GEMINI_GLOBAL_SOFT_RESET 0x0c
#define to_gemini_reset(p) \
container_of((p), struct gemini_reset, rcdev)
/*
* This is a self-deasserting reset controller.
*/
static int gemini_reset(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct gemini_reset *gr = to_gemini_reset(rcdev);
/* Manual says to always set BIT 30 (CPU1) to 1 */
return regmap_write(gr->map,
GEMINI_GLOBAL_SOFT_RESET,
BIT(GEMINI_RESET_CPU1) | BIT(id));
}
static int gemini_reset_status(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct gemini_reset *gr = to_gemini_reset(rcdev);
u32 val;
int ret;
ret = regmap_read(gr->map, GEMINI_GLOBAL_SOFT_RESET, &val);
if (ret)
return ret;
return !!(val & BIT(id));
}
static const struct reset_control_ops gemini_reset_ops = {
.reset = gemini_reset,
.status = gemini_reset_status,
};
static int gemini_reset_probe(struct platform_device *pdev)
{
struct gemini_reset *gr;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
int ret;
gr = devm_kzalloc(dev, sizeof(*gr), GFP_KERNEL);
if (!gr)
return -ENOMEM;
gr->map = syscon_node_to_regmap(np);
if (IS_ERR(gr->map)) {
ret = PTR_ERR(gr->map);
dev_err(dev, "unable to get regmap (%d)", ret);
return ret;
}
gr->rcdev.owner = THIS_MODULE;
gr->rcdev.nr_resets = 32;
gr->rcdev.ops = &gemini_reset_ops;
gr->rcdev.of_node = pdev->dev.of_node;
ret = devm_reset_controller_register(&pdev->dev, &gr->rcdev);
if (ret)
return ret;
dev_info(dev, "registered Gemini reset controller\n");
return 0;
}
static const struct of_device_id gemini_reset_dt_ids[] = {
{ .compatible = "cortina,gemini-syscon", },
{ /* sentinel */ },
};
static struct platform_driver gemini_reset_driver = {
.probe = gemini_reset_probe,
.driver = {
.name = "gemini-reset",
.of_match_table = gemini_reset_dt_ids,
.suppress_bind_attrs = true,
},
};
builtin_platform_driver(gemini_reset_driver);

View File

@ -0,0 +1,269 @@
/*
* Texas Instrument's System Control Interface (TI-SCI) reset driver
*
* Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
* Andrew F. Davis <afd@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/idr.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/soc/ti/ti_sci_protocol.h>
/**
* struct ti_sci_reset_control - reset control structure
* @dev_id: SoC-specific device identifier
* @reset_mask: reset mask to use for toggling reset
* @lock: synchronize reset_mask read-modify-writes
*/
struct ti_sci_reset_control {
u32 dev_id;
u32 reset_mask;
struct mutex lock;
};
/**
* struct ti_sci_reset_data - reset controller information structure
* @rcdev: reset controller entity
* @dev: reset controller device pointer
* @sci: TI SCI handle used for communication with system controller
* @idr: idr structure for mapping ids to reset control structures
*/
struct ti_sci_reset_data {
struct reset_controller_dev rcdev;
struct device *dev;
const struct ti_sci_handle *sci;
struct idr idr;
};
#define to_ti_sci_reset_data(p) \
container_of((p), struct ti_sci_reset_data, rcdev)
/**
* ti_sci_reset_set() - program a device's reset
* @rcdev: reset controller entity
* @id: ID of the reset to toggle
* @assert: boolean flag to indicate assert or deassert
*
* This is a common internal function used to assert or deassert a device's
* reset using the TI SCI protocol. The device's reset is asserted if the
* @assert argument is true, or deasserted if @assert argument is false.
* The mechanism itself is a read-modify-write procedure, the current device
* reset register is read using a TI SCI device operation, the new value is
* set or un-set using the reset's mask, and the new reset value written by
* using another TI SCI device operation.
*
* Return: 0 for successful request, else a corresponding error value
*/
static int ti_sci_reset_set(struct reset_controller_dev *rcdev,
unsigned long id, bool assert)
{
struct ti_sci_reset_data *data = to_ti_sci_reset_data(rcdev);
const struct ti_sci_handle *sci = data->sci;
const struct ti_sci_dev_ops *dev_ops = &sci->ops.dev_ops;
struct ti_sci_reset_control *control;
u32 reset_state;
int ret;
control = idr_find(&data->idr, id);
if (!control)
return -EINVAL;
mutex_lock(&control->lock);
ret = dev_ops->get_device_resets(sci, control->dev_id, &reset_state);
if (ret)
goto out;
if (assert)
reset_state |= control->reset_mask;
else
reset_state &= ~control->reset_mask;
ret = dev_ops->set_device_resets(sci, control->dev_id, reset_state);
out:
mutex_unlock(&control->lock);
return ret;
}
/**
* ti_sci_reset_assert() - assert device reset
* @rcdev: reset controller entity
* @id: ID of the reset to be asserted
*
* This function implements the reset driver op to assert a device's reset
* using the TI SCI protocol. This invokes the function ti_sci_reset_set()
* with the corresponding parameters as passed in, but with the @assert
* argument set to true for asserting the reset.
*
* Return: 0 for successful request, else a corresponding error value
*/
static int ti_sci_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)
{
return ti_sci_reset_set(rcdev, id, true);
}
/**
* ti_sci_reset_deassert() - deassert device reset
* @rcdev: reset controller entity
* @id: ID of the reset to be deasserted
*
* This function implements the reset driver op to deassert a device's reset
* using the TI SCI protocol. This invokes the function ti_sci_reset_set()
* with the corresponding parameters as passed in, but with the @assert
* argument set to false for deasserting the reset.
*
* Return: 0 for successful request, else a corresponding error value
*/
static int ti_sci_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)
{
return ti_sci_reset_set(rcdev, id, false);
}
/**
* ti_sci_reset_status() - check device reset status
* @rcdev: reset controller entity
* @id: ID of reset to be checked
*
* This function implements the reset driver op to return the status of a
* device's reset using the TI SCI protocol. The reset register value is read
* by invoking the TI SCI device operation .get_device_resets(), and the
* status of the specific reset is extracted and returned using this reset's
* reset mask.
*
* Return: 0 if reset is deasserted, or a non-zero value if reset is asserted
*/
static int ti_sci_reset_status(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct ti_sci_reset_data *data = to_ti_sci_reset_data(rcdev);
const struct ti_sci_handle *sci = data->sci;
const struct ti_sci_dev_ops *dev_ops = &sci->ops.dev_ops;
struct ti_sci_reset_control *control;
u32 reset_state;
int ret;
control = idr_find(&data->idr, id);
if (!control)
return -EINVAL;
ret = dev_ops->get_device_resets(sci, control->dev_id, &reset_state);
if (ret)
return ret;
return reset_state & control->reset_mask;
}
static const struct reset_control_ops ti_sci_reset_ops = {
.assert = ti_sci_reset_assert,
.deassert = ti_sci_reset_deassert,
.status = ti_sci_reset_status,
};
/**
* ti_sci_reset_of_xlate() - translate a set of OF arguments to a reset ID
* @rcdev: reset controller entity
* @reset_spec: OF reset argument specifier
*
* This function performs the translation of the reset argument specifier
* values defined in a reset consumer device node. The function allocates a
* reset control structure for that device reset, and will be used by the
* driver for performing any reset functions on that reset. An idr structure
* is allocated and used to map to the reset control structure. This idr
* is used by the driver to do reset lookups.
*
* Return: 0 for successful request, else a corresponding error value
*/
static int ti_sci_reset_of_xlate(struct reset_controller_dev *rcdev,
const struct of_phandle_args *reset_spec)
{
struct ti_sci_reset_data *data = to_ti_sci_reset_data(rcdev);
struct ti_sci_reset_control *control;
if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
return -EINVAL;
control = devm_kzalloc(data->dev, sizeof(*control), GFP_KERNEL);
if (!control)
return -ENOMEM;
control->dev_id = reset_spec->args[0];
control->reset_mask = reset_spec->args[1];
mutex_init(&control->lock);
return idr_alloc(&data->idr, control, 0, 0, GFP_KERNEL);
}
static const struct of_device_id ti_sci_reset_of_match[] = {
{ .compatible = "ti,sci-reset", },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, ti_sci_reset_of_match);
static int ti_sci_reset_probe(struct platform_device *pdev)
{
struct ti_sci_reset_data *data;
if (!pdev->dev.of_node)
return -ENODEV;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->sci = devm_ti_sci_get_handle(&pdev->dev);
if (IS_ERR(data->sci))
return PTR_ERR(data->sci);
data->rcdev.ops = &ti_sci_reset_ops;
data->rcdev.owner = THIS_MODULE;
data->rcdev.of_node = pdev->dev.of_node;
data->rcdev.of_reset_n_cells = 2;
data->rcdev.of_xlate = ti_sci_reset_of_xlate;
data->dev = &pdev->dev;
idr_init(&data->idr);
platform_set_drvdata(pdev, data);
return reset_controller_register(&data->rcdev);
}
static int ti_sci_reset_remove(struct platform_device *pdev)
{
struct ti_sci_reset_data *data = platform_get_drvdata(pdev);
reset_controller_unregister(&data->rcdev);
idr_destroy(&data->idr);
return 0;
}
static struct platform_driver ti_sci_reset_driver = {
.probe = ti_sci_reset_probe,
.remove = ti_sci_reset_remove,
.driver = {
.name = "ti-sci-reset",
.of_match_table = ti_sci_reset_of_match,
},
};
module_platform_driver(ti_sci_reset_driver);
MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
MODULE_DESCRIPTION("TI System Control Interface (TI SCI) Reset driver");
MODULE_LICENSE("GPL v2");

View File

@ -145,16 +145,14 @@ static int syscfg_reset_controller_register(struct device *dev,
const struct syscfg_reset_controller_data *data)
{
struct syscfg_reset_controller *rc;
size_t size;
int i, err;
rc = devm_kzalloc(dev, sizeof(*rc), GFP_KERNEL);
if (!rc)
return -ENOMEM;
size = sizeof(struct syscfg_reset_channel) * data->nr_channels;
rc->channels = devm_kzalloc(dev, size, GFP_KERNEL);
rc->channels = devm_kcalloc(dev, data->nr_channels,
sizeof(*rc->channels), GFP_KERNEL);
if (!rc->channels)
return -ENOMEM;

View File

@ -7,6 +7,7 @@ source "drivers/soc/fsl/Kconfig"
source "drivers/soc/imx/Kconfig"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
source "drivers/soc/renesas/Kconfig"
source "drivers/soc/rockchip/Kconfig"
source "drivers/soc/samsung/Kconfig"
source "drivers/soc/sunxi/Kconfig"

View File

@ -11,7 +11,7 @@ obj-y += fsl/
obj-$(CONFIG_ARCH_MXC) += imx/
obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
obj-$(CONFIG_ARCH_QCOM) += qcom/
obj-$(CONFIG_ARCH_RENESAS) += renesas/
obj-y += renesas/
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_SOC_SAMSUNG) += samsung/
obj-$(CONFIG_ARCH_SUNXI) += sunxi/

View File

@ -11,7 +11,7 @@ config RASPBERRYPI_POWER
config SOC_BRCMSTB
bool "Broadcom STB SoC drivers"
depends on ARM
depends on ARM || ARM64 || BMIPS_GENERIC || COMPILE_TEST
select SOC_BUS
help
Enables drivers for the Broadcom Set-Top Box (STB) series of chips.

View File

@ -1,2 +1,2 @@
obj-y += gpc.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_IMX7_PM_DOMAINS) += gpcv2.o

View File

@ -1117,6 +1117,11 @@ static int pwrap_probe(struct platform_device *pdev)
const struct of_device_id *of_slave_id = NULL;
struct resource *res;
if (!of_id) {
dev_err(&pdev->dev, "Error: No device match found\n");
return -ENODEV;
}
if (pdev->dev.of_node->child)
of_slave_id = of_match_node(of_slave_match_tbl,
pdev->dev.of_node->child);
@ -1200,7 +1205,8 @@ static int pwrap_probe(struct platform_device *pdev)
if (!(pwrap_readl(wrp, PWRAP_WACS2_RDATA) & PWRAP_STATE_INIT_DONE0)) {
dev_dbg(wrp->dev, "initialization isn't finished\n");
return -ENODEV;
ret = -ENODEV;
goto err_out2;
}
/* Initialize watchdog, may not be done by the bootloader */
@ -1220,8 +1226,10 @@ static int pwrap_probe(struct platform_device *pdev)
goto err_out2;
wrp->regmap = devm_regmap_init(wrp->dev, NULL, wrp, &pwrap_regmap_config);
if (IS_ERR(wrp->regmap))
return PTR_ERR(wrp->regmap);
if (IS_ERR(wrp->regmap)) {
ret = PTR_ERR(wrp->regmap);
goto err_out2;
}
ret = of_platform_populate(np, NULL, NULL, wrp->dev);
if (ret) {

View File

@ -21,6 +21,7 @@
#include <linux/soc/mediatek/infracfg.h>
#include <dt-bindings/power/mt2701-power.h>
#include <dt-bindings/power/mt6797-power.h>
#include <dt-bindings/power/mt8173-power.h>
#define SPM_VDE_PWR_CON 0x0210
@ -71,6 +72,7 @@ enum clk_id {
CLK_VENC,
CLK_VENC_LT,
CLK_ETHIF,
CLK_VDEC,
CLK_MAX,
};
@ -81,6 +83,7 @@ static const char * const clk_names[] = {
"venc",
"venc_lt",
"ethif",
"vdec",
NULL,
};
@ -107,21 +110,28 @@ struct scp_domain {
struct regulator *supply;
};
struct scp_ctrl_reg {
int pwr_sta_offs;
int pwr_sta2nd_offs;
};
struct scp {
struct scp_domain *domains;
struct genpd_onecell_data pd_data;
struct device *dev;
void __iomem *base;
struct regmap *infracfg;
struct scp_ctrl_reg ctrl_reg;
};
static int scpsys_domain_is_on(struct scp_domain *scpd)
{
struct scp *scp = scpd->scp;
u32 status = readl(scp->base + SPM_PWR_STATUS) & scpd->data->sta_mask;
u32 status2 = readl(scp->base + SPM_PWR_STATUS_2ND) &
scpd->data->sta_mask;
u32 status = readl(scp->base + scp->ctrl_reg.pwr_sta_offs) &
scpd->data->sta_mask;
u32 status2 = readl(scp->base + scp->ctrl_reg.pwr_sta2nd_offs) &
scpd->data->sta_mask;
/*
* A domain is on when both status bits are set. If only one is set
@ -346,7 +356,8 @@ static void init_clks(struct platform_device *pdev, struct clk **clk)
}
static struct scp *init_scp(struct platform_device *pdev,
const struct scp_domain_data *scp_domain_data, int num)
const struct scp_domain_data *scp_domain_data, int num,
struct scp_ctrl_reg *scp_ctrl_reg)
{
struct genpd_onecell_data *pd_data;
struct resource *res;
@ -358,6 +369,9 @@ static struct scp *init_scp(struct platform_device *pdev,
if (!scp)
return ERR_PTR(-ENOMEM);
scp->ctrl_reg.pwr_sta_offs = scp_ctrl_reg->pwr_sta_offs;
scp->ctrl_reg.pwr_sta2nd_offs = scp_ctrl_reg->pwr_sta2nd_offs;
scp->dev = &pdev->dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@ -556,8 +570,13 @@ static const struct scp_domain_data scp_domain_data_mt2701[] = {
static int __init scpsys_probe_mt2701(struct platform_device *pdev)
{
struct scp *scp;
struct scp_ctrl_reg scp_reg;
scp = init_scp(pdev, scp_domain_data_mt2701, NUM_DOMAINS_MT2701);
scp_reg.pwr_sta_offs = SPM_PWR_STATUS;
scp_reg.pwr_sta2nd_offs = SPM_PWR_STATUS_2ND;
scp = init_scp(pdev, scp_domain_data_mt2701, NUM_DOMAINS_MT2701,
&scp_reg);
if (IS_ERR(scp))
return PTR_ERR(scp);
@ -566,6 +585,116 @@ static int __init scpsys_probe_mt2701(struct platform_device *pdev)
return 0;
}
/*
* MT6797 power domain support
*/
static const struct scp_domain_data scp_domain_data_mt6797[] = {
[MT6797_POWER_DOMAIN_VDEC] = {
.name = "vdec",
.sta_mask = BIT(7),
.ctl_offs = 0x300,
.sram_pdn_bits = GENMASK(8, 8),
.sram_pdn_ack_bits = GENMASK(12, 12),
.clk_id = {CLK_VDEC},
},
[MT6797_POWER_DOMAIN_VENC] = {
.name = "venc",
.sta_mask = BIT(21),
.ctl_offs = 0x304,
.sram_pdn_bits = GENMASK(11, 8),
.sram_pdn_ack_bits = GENMASK(15, 12),
.clk_id = {CLK_NONE},
},
[MT6797_POWER_DOMAIN_ISP] = {
.name = "isp",
.sta_mask = BIT(5),
.ctl_offs = 0x308,
.sram_pdn_bits = GENMASK(9, 8),
.sram_pdn_ack_bits = GENMASK(13, 12),
.clk_id = {CLK_NONE},
},
[MT6797_POWER_DOMAIN_MM] = {
.name = "mm",
.sta_mask = BIT(3),
.ctl_offs = 0x30C,
.sram_pdn_bits = GENMASK(8, 8),
.sram_pdn_ack_bits = GENMASK(12, 12),
.clk_id = {CLK_MM},
.bus_prot_mask = (BIT(1) | BIT(2)),
},
[MT6797_POWER_DOMAIN_AUDIO] = {
.name = "audio",
.sta_mask = BIT(24),
.ctl_offs = 0x314,
.sram_pdn_bits = GENMASK(11, 8),
.sram_pdn_ack_bits = GENMASK(15, 12),
.clk_id = {CLK_NONE},
},
[MT6797_POWER_DOMAIN_MFG_ASYNC] = {
.name = "mfg_async",
.sta_mask = BIT(13),
.ctl_offs = 0x334,
.sram_pdn_bits = 0,
.sram_pdn_ack_bits = 0,
.clk_id = {CLK_MFG},
},
[MT6797_POWER_DOMAIN_MJC] = {
.name = "mjc",
.sta_mask = BIT(20),
.ctl_offs = 0x310,
.sram_pdn_bits = GENMASK(8, 8),
.sram_pdn_ack_bits = GENMASK(12, 12),
.clk_id = {CLK_NONE},
},
};
#define NUM_DOMAINS_MT6797 ARRAY_SIZE(scp_domain_data_mt6797)
#define SPM_PWR_STATUS_MT6797 0x0180
#define SPM_PWR_STATUS_2ND_MT6797 0x0184
static int __init scpsys_probe_mt6797(struct platform_device *pdev)
{
struct scp *scp;
struct genpd_onecell_data *pd_data;
int ret;
struct scp_ctrl_reg scp_reg;
scp_reg.pwr_sta_offs = SPM_PWR_STATUS_MT6797;
scp_reg.pwr_sta2nd_offs = SPM_PWR_STATUS_2ND_MT6797;
scp = init_scp(pdev, scp_domain_data_mt6797, NUM_DOMAINS_MT6797,
&scp_reg);
if (IS_ERR(scp))
return PTR_ERR(scp);
mtk_register_power_domains(pdev, scp, NUM_DOMAINS_MT6797);
pd_data = &scp->pd_data;
ret = pm_genpd_add_subdomain(pd_data->domains[MT6797_POWER_DOMAIN_MM],
pd_data->domains[MT6797_POWER_DOMAIN_VDEC]);
if (ret && IS_ENABLED(CONFIG_PM))
dev_err(&pdev->dev, "Failed to add subdomain: %d\n", ret);
ret = pm_genpd_add_subdomain(pd_data->domains[MT6797_POWER_DOMAIN_MM],
pd_data->domains[MT6797_POWER_DOMAIN_ISP]);
if (ret && IS_ENABLED(CONFIG_PM))
dev_err(&pdev->dev, "Failed to add subdomain: %d\n", ret);
ret = pm_genpd_add_subdomain(pd_data->domains[MT6797_POWER_DOMAIN_MM],
pd_data->domains[MT6797_POWER_DOMAIN_VENC]);
if (ret && IS_ENABLED(CONFIG_PM))
dev_err(&pdev->dev, "Failed to add subdomain: %d\n", ret);
ret = pm_genpd_add_subdomain(pd_data->domains[MT6797_POWER_DOMAIN_MM],
pd_data->domains[MT6797_POWER_DOMAIN_MJC]);
if (ret && IS_ENABLED(CONFIG_PM))
dev_err(&pdev->dev, "Failed to add subdomain: %d\n", ret);
return 0;
}
/*
* MT8173 power domain support
*/
@ -667,8 +796,13 @@ static int __init scpsys_probe_mt8173(struct platform_device *pdev)
struct scp *scp;
struct genpd_onecell_data *pd_data;
int ret;
struct scp_ctrl_reg scp_reg;
scp = init_scp(pdev, scp_domain_data_mt8173, NUM_DOMAINS_MT8173);
scp_reg.pwr_sta_offs = SPM_PWR_STATUS;
scp_reg.pwr_sta2nd_offs = SPM_PWR_STATUS_2ND;
scp = init_scp(pdev, scp_domain_data_mt8173, NUM_DOMAINS_MT8173,
&scp_reg);
if (IS_ERR(scp))
return PTR_ERR(scp);
@ -697,6 +831,9 @@ static const struct of_device_id of_scpsys_match_tbl[] = {
{
.compatible = "mediatek,mt2701-scpsys",
.data = scpsys_probe_mt2701,
}, {
.compatible = "mediatek,mt6797-scpsys",
.data = scpsys_probe_mt6797,
}, {
.compatible = "mediatek,mt8173-scpsys",
.data = scpsys_probe_mt8173,

View File

@ -439,14 +439,15 @@ static int smsm_get_size_info(struct qcom_smsm *smsm)
} *info;
info = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_SMSM_SIZE_INFO, &size);
if (PTR_ERR(info) == -ENOENT || size != sizeof(*info)) {
if (IS_ERR(info) && PTR_ERR(info) != -ENOENT) {
if (PTR_ERR(info) != -EPROBE_DEFER)
dev_err(smsm->dev, "unable to retrieve smsm size info\n");
return PTR_ERR(info);
} else if (IS_ERR(info) || size != sizeof(*info)) {
dev_warn(smsm->dev, "no smsm size info, using defaults\n");
smsm->num_entries = SMSM_DEFAULT_NUM_ENTRIES;
smsm->num_hosts = SMSM_DEFAULT_NUM_HOSTS;
return 0;
} else if (IS_ERR(info)) {
dev_err(smsm->dev, "unable to retrieve smsm size info\n");
return PTR_ERR(info);
}
smsm->num_entries = info->num_entries;

View File

@ -0,0 +1,63 @@
config SOC_RENESAS
bool "Renesas SoC driver support" if COMPILE_TEST && !ARCH_RENESAS
default y if ARCH_RENESAS
select SOC_BUS
select RST_RCAR if ARCH_RCAR_GEN1 || ARCH_RCAR_GEN2 || \
ARCH_R8A7795 || ARCH_R8A7796
select SYSC_R8A7743 if ARCH_R8A7743
select SYSC_R8A7745 if ARCH_R8A7745
select SYSC_R8A7779 if ARCH_R8A7779
select SYSC_R8A7790 if ARCH_R8A7790
select SYSC_R8A7791 if ARCH_R8A7791 || ARCH_R8A7793
select SYSC_R8A7792 if ARCH_R8A7792
select SYSC_R8A7794 if ARCH_R8A7794
select SYSC_R8A7795 if ARCH_R8A7795
select SYSC_R8A7796 if ARCH_R8A7796
if SOC_RENESAS
# SoC
config SYSC_R8A7743
bool "RZ/G1M System Controller support" if COMPILE_TEST
select SYSC_RCAR
config SYSC_R8A7745
bool "RZ/G1E System Controller support" if COMPILE_TEST
select SYSC_RCAR
config SYSC_R8A7779
bool "R-Car H1 System Controller support" if COMPILE_TEST
select SYSC_RCAR
config SYSC_R8A7790
bool "R-Car H2 System Controller support" if COMPILE_TEST
select SYSC_RCAR
config SYSC_R8A7791
bool "R-Car M2-W/N System Controller support" if COMPILE_TEST
select SYSC_RCAR
config SYSC_R8A7792
bool "R-Car V2H System Controller support" if COMPILE_TEST
select SYSC_RCAR
config SYSC_R8A7794
bool "R-Car E2 System Controller support" if COMPILE_TEST
select SYSC_RCAR
config SYSC_R8A7795
bool "R-Car H3 System Controller support" if COMPILE_TEST
select SYSC_RCAR
config SYSC_R8A7796
bool "R-Car M3-W System Controller support" if COMPILE_TEST
select SYSC_RCAR
# Family
config RST_RCAR
bool "R-Car Reset Controller support" if COMPILE_TEST
config SYSC_RCAR
bool "R-Car System Controller support" if COMPILE_TEST
endif # SOC_RENESAS

View File

@ -1,18 +1,17 @@
obj-$(CONFIG_SOC_BUS) += renesas-soc.o
# Generic, must be first because of soc_device_register()
obj-$(CONFIG_SOC_RENESAS) += renesas-soc.o
obj-$(CONFIG_ARCH_RCAR_GEN1) += rcar-rst.o
obj-$(CONFIG_ARCH_RCAR_GEN2) += rcar-rst.o
obj-$(CONFIG_ARCH_R8A7795) += rcar-rst.o
obj-$(CONFIG_ARCH_R8A7796) += rcar-rst.o
# SoC
obj-$(CONFIG_SYSC_R8A7743) += r8a7743-sysc.o
obj-$(CONFIG_SYSC_R8A7745) += r8a7745-sysc.o
obj-$(CONFIG_SYSC_R8A7779) += r8a7779-sysc.o
obj-$(CONFIG_SYSC_R8A7790) += r8a7790-sysc.o
obj-$(CONFIG_SYSC_R8A7791) += r8a7791-sysc.o
obj-$(CONFIG_SYSC_R8A7792) += r8a7792-sysc.o
obj-$(CONFIG_SYSC_R8A7794) += r8a7794-sysc.o
obj-$(CONFIG_SYSC_R8A7795) += r8a7795-sysc.o
obj-$(CONFIG_SYSC_R8A7796) += r8a7796-sysc.o
obj-$(CONFIG_ARCH_R8A7743) += rcar-sysc.o r8a7743-sysc.o
obj-$(CONFIG_ARCH_R8A7745) += rcar-sysc.o r8a7745-sysc.o
obj-$(CONFIG_ARCH_R8A7779) += rcar-sysc.o r8a7779-sysc.o
obj-$(CONFIG_ARCH_R8A7790) += rcar-sysc.o r8a7790-sysc.o
obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o r8a7791-sysc.o
obj-$(CONFIG_ARCH_R8A7792) += rcar-sysc.o r8a7792-sysc.o
# R-Car M2-N is identical to R-Car M2-W w.r.t. power domains.
obj-$(CONFIG_ARCH_R8A7793) += rcar-sysc.o r8a7791-sysc.o
obj-$(CONFIG_ARCH_R8A7794) += rcar-sysc.o r8a7794-sysc.o
obj-$(CONFIG_ARCH_R8A7795) += rcar-sysc.o r8a7795-sysc.o
obj-$(CONFIG_ARCH_R8A7796) += rcar-sysc.o r8a7796-sysc.o
# Family
obj-$(CONFIG_RST_RCAR) += rcar-rst.o
obj-$(CONFIG_SYSC_RCAR) += rcar-sysc.o

View File

@ -181,17 +181,6 @@ static int rcar_sysc_pd_power_off(struct generic_pm_domain *genpd)
struct rcar_sysc_pd *pd = to_rcar_pd(genpd);
pr_debug("%s: %s\n", __func__, genpd->name);
if (pd->flags & PD_NO_CR) {
pr_debug("%s: Cannot control %s\n", __func__, genpd->name);
return -EBUSY;
}
if (pd->flags & PD_BUSY) {
pr_debug("%s: %s busy\n", __func__, genpd->name);
return -EBUSY;
}
return rcar_sysc_power_down(&pd->ch);
}
@ -200,12 +189,6 @@ static int rcar_sysc_pd_power_on(struct generic_pm_domain *genpd)
struct rcar_sysc_pd *pd = to_rcar_pd(genpd);
pr_debug("%s: %s\n", __func__, genpd->name);
if (pd->flags & PD_NO_CR) {
pr_debug("%s: Cannot control %s\n", __func__, genpd->name);
return 0;
}
return rcar_sysc_power_up(&pd->ch);
}
@ -223,8 +206,7 @@ static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd)
* only be turned off if the CPU is not in use.
*/
pr_debug("PM domain %s contains %s\n", name, "CPU");
pd->flags |= PD_BUSY;
gov = &pm_domain_always_on_gov;
genpd->flags |= GENPD_FLAG_ALWAYS_ON;
} else if (pd->flags & PD_SCU) {
/*
* This domain contains an SCU and cache-controller, and
@ -232,19 +214,17 @@ static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd)
* not in use.
*/
pr_debug("PM domain %s contains %s\n", name, "SCU");
pd->flags |= PD_BUSY;
gov = &pm_domain_always_on_gov;
genpd->flags |= GENPD_FLAG_ALWAYS_ON;
} else if (pd->flags & PD_NO_CR) {
/*
* This domain cannot be turned off.
*/
pd->flags |= PD_BUSY;
gov = &pm_domain_always_on_gov;
genpd->flags |= GENPD_FLAG_ALWAYS_ON;
}
if (!(pd->flags & (PD_CPU | PD_SCU))) {
/* Enable Clock Domain for I/O devices */
genpd->flags = GENPD_FLAG_PM_CLK;
genpd->flags |= GENPD_FLAG_PM_CLK;
if (has_cpg_mstp) {
genpd->attach_dev = cpg_mstp_attach_dev;
genpd->detach_dev = cpg_mstp_detach_dev;
@ -275,35 +255,33 @@ finalize:
}
static const struct of_device_id rcar_sysc_matches[] = {
#ifdef CONFIG_ARCH_R8A7743
#ifdef CONFIG_SYSC_R8A7743
{ .compatible = "renesas,r8a7743-sysc", .data = &r8a7743_sysc_info },
#endif
#ifdef CONFIG_ARCH_R8A7745
#ifdef CONFIG_SYSC_R8A7745
{ .compatible = "renesas,r8a7745-sysc", .data = &r8a7745_sysc_info },
#endif
#ifdef CONFIG_ARCH_R8A7779
#ifdef CONFIG_SYSC_R8A7779
{ .compatible = "renesas,r8a7779-sysc", .data = &r8a7779_sysc_info },
#endif
#ifdef CONFIG_ARCH_R8A7790
#ifdef CONFIG_SYSC_R8A7790
{ .compatible = "renesas,r8a7790-sysc", .data = &r8a7790_sysc_info },
#endif
#ifdef CONFIG_ARCH_R8A7791
#ifdef CONFIG_SYSC_R8A7791
{ .compatible = "renesas,r8a7791-sysc", .data = &r8a7791_sysc_info },
#endif
#ifdef CONFIG_ARCH_R8A7792
{ .compatible = "renesas,r8a7792-sysc", .data = &r8a7792_sysc_info },
#endif
#ifdef CONFIG_ARCH_R8A7793
/* R-Car M2-N is identical to R-Car M2-W w.r.t. power domains. */
{ .compatible = "renesas,r8a7793-sysc", .data = &r8a7791_sysc_info },
#endif
#ifdef CONFIG_ARCH_R8A7794
#ifdef CONFIG_SYSC_R8A7792
{ .compatible = "renesas,r8a7792-sysc", .data = &r8a7792_sysc_info },
#endif
#ifdef CONFIG_SYSC_R8A7794
{ .compatible = "renesas,r8a7794-sysc", .data = &r8a7794_sysc_info },
#endif
#ifdef CONFIG_ARCH_R8A7795
#ifdef CONFIG_SYSC_R8A7795
{ .compatible = "renesas,r8a7795-sysc", .data = &r8a7795_sysc_info },
#endif
#ifdef CONFIG_ARCH_R8A7796
#ifdef CONFIG_SYSC_R8A7796
{ .compatible = "renesas,r8a7796-sysc", .data = &r8a7796_sysc_info },
#endif
{ /* sentinel */ }

View File

@ -20,8 +20,6 @@
#define PD_SCU BIT(1) /* Area contains SCU and L2 cache */
#define PD_NO_CR BIT(2) /* Area lacks PWR{ON,OFF}CR registers */
#define PD_BUSY BIT(3) /* Busy, for internal use only */
#define PD_CPU_CR PD_CPU /* CPU area has CR (R-Car H1) */
#define PD_CPU_NOCR PD_CPU | PD_NO_CR /* CPU area lacks CR (R-Car Gen2/3) */
#define PD_ALWAYS_ON PD_NO_CR /* Always-on area */

View File

@ -115,3 +115,8 @@ config SOC_TEGRA_PMC
config SOC_TEGRA_PMC_TEGRA186
bool
config SOC_TEGRA_POWERGATE_BPMP
def_bool y
depends on PM_GENERIC_DOMAINS
depends on TEGRA_BPMP

View File

@ -4,3 +4,4 @@ obj-y += common.o
obj-$(CONFIG_SOC_TEGRA_FLOWCTRL) += flowctrl.o
obj-$(CONFIG_SOC_TEGRA_PMC) += pmc.o
obj-$(CONFIG_SOC_TEGRA_PMC_TEGRA186) += pmc-tegra186.o
obj-$(CONFIG_SOC_TEGRA_POWERGATE_BPMP) += powergate-bpmp.o

View File

@ -157,7 +157,7 @@ static int tegra_flowctrl_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
tegra_flowctrl_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(tegra_flowctrl_base))
return PTR_ERR(base);
return PTR_ERR(tegra_flowctrl_base);
iounmap(base);

View File

@ -0,0 +1,359 @@
/*
* Copyright (c) 2016-2017, NVIDIA CORPORATION. All rights reserved
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/slab.h>
#include <linux/version.h>
#include <soc/tegra/bpmp.h>
#include <soc/tegra/bpmp-abi.h>
struct tegra_powergate_info {
unsigned int id;
char *name;
};
struct tegra_powergate {
struct generic_pm_domain genpd;
struct tegra_bpmp *bpmp;
unsigned int id;
};
static inline struct tegra_powergate *
to_tegra_powergate(struct generic_pm_domain *genpd)
{
return container_of(genpd, struct tegra_powergate, genpd);
}
static int tegra_bpmp_powergate_set_state(struct tegra_bpmp *bpmp,
unsigned int id, u32 state)
{
struct mrq_pg_request request;
struct tegra_bpmp_message msg;
memset(&request, 0, sizeof(request));
request.cmd = CMD_PG_SET_STATE;
request.id = id;
request.set_state.state = state;
memset(&msg, 0, sizeof(msg));
msg.mrq = MRQ_PG;
msg.tx.data = &request;
msg.tx.size = sizeof(request);
return tegra_bpmp_transfer(bpmp, &msg);
}
static int tegra_bpmp_powergate_get_state(struct tegra_bpmp *bpmp,
unsigned int id)
{
struct mrq_pg_response response;
struct mrq_pg_request request;
struct tegra_bpmp_message msg;
int err;
memset(&request, 0, sizeof(request));
request.cmd = CMD_PG_GET_STATE;
request.id = id;
memset(&response, 0, sizeof(response));
memset(&msg, 0, sizeof(msg));
msg.mrq = MRQ_PG;
msg.tx.data = &request;
msg.tx.size = sizeof(request);
msg.rx.data = &response;
msg.rx.size = sizeof(response);
err = tegra_bpmp_transfer(bpmp, &msg);
if (err < 0)
return PG_STATE_OFF;
return response.get_state.state;
}
static int tegra_bpmp_powergate_get_max_id(struct tegra_bpmp *bpmp)
{
struct mrq_pg_response response;
struct mrq_pg_request request;
struct tegra_bpmp_message msg;
int err;
memset(&request, 0, sizeof(request));
request.cmd = CMD_PG_GET_MAX_ID;
memset(&response, 0, sizeof(response));
memset(&msg, 0, sizeof(msg));
msg.mrq = MRQ_PG;
msg.tx.data = &request;
msg.tx.size = sizeof(request);
msg.rx.data = &response;
msg.rx.size = sizeof(response);
err = tegra_bpmp_transfer(bpmp, &msg);
if (err < 0)
return err;
return response.get_max_id.max_id;
}
static char *tegra_bpmp_powergate_get_name(struct tegra_bpmp *bpmp,
unsigned int id)
{
struct mrq_pg_response response;
struct mrq_pg_request request;
struct tegra_bpmp_message msg;
int err;
memset(&request, 0, sizeof(request));
request.cmd = CMD_PG_GET_NAME;
request.id = id;
memset(&response, 0, sizeof(response));
memset(&msg, 0, sizeof(msg));
msg.mrq = MRQ_PG;
msg.tx.data = &request;
msg.tx.size = sizeof(request);
msg.rx.data = &response;
msg.rx.size = sizeof(response);
err = tegra_bpmp_transfer(bpmp, &msg);
if (err < 0)
return NULL;
return kstrdup(response.get_name.name, GFP_KERNEL);
}
static inline bool tegra_bpmp_powergate_is_powered(struct tegra_bpmp *bpmp,
unsigned int id)
{
return tegra_bpmp_powergate_get_state(bpmp, id) != PG_STATE_OFF;
}
static int tegra_powergate_power_on(struct generic_pm_domain *domain)
{
struct tegra_powergate *powergate = to_tegra_powergate(domain);
struct tegra_bpmp *bpmp = powergate->bpmp;
return tegra_bpmp_powergate_set_state(bpmp, powergate->id,
PG_STATE_ON);
}
static int tegra_powergate_power_off(struct generic_pm_domain *domain)
{
struct tegra_powergate *powergate = to_tegra_powergate(domain);
struct tegra_bpmp *bpmp = powergate->bpmp;
return tegra_bpmp_powergate_set_state(bpmp, powergate->id,
PG_STATE_OFF);
}
static struct tegra_powergate *
tegra_powergate_add(struct tegra_bpmp *bpmp,
const struct tegra_powergate_info *info)
{
struct tegra_powergate *powergate;
bool off;
int err;
off = !tegra_bpmp_powergate_is_powered(bpmp, info->id);
powergate = devm_kzalloc(bpmp->dev, sizeof(*powergate), GFP_KERNEL);
if (!powergate)
return ERR_PTR(-ENOMEM);
powergate->id = info->id;
powergate->bpmp = bpmp;
powergate->genpd.name = kstrdup(info->name, GFP_KERNEL);
powergate->genpd.power_on = tegra_powergate_power_on;
powergate->genpd.power_off = tegra_powergate_power_off;
err = pm_genpd_init(&powergate->genpd, NULL, off);
if (err < 0) {
kfree(powergate->genpd.name);
return ERR_PTR(err);
}
return powergate;
}
static void tegra_powergate_remove(struct tegra_powergate *powergate)
{
struct generic_pm_domain *genpd = &powergate->genpd;
struct tegra_bpmp *bpmp = powergate->bpmp;
int err;
err = pm_genpd_remove(genpd);
if (err < 0)
dev_err(bpmp->dev, "failed to remove power domain %s: %d\n",
genpd->name, err);
kfree(genpd->name);
}
static int
tegra_bpmp_probe_powergates(struct tegra_bpmp *bpmp,
struct tegra_powergate_info **powergatesp)
{
struct tegra_powergate_info *powergates;
unsigned int max_id, id, count = 0;
unsigned int num_holes = 0;
int err;
err = tegra_bpmp_powergate_get_max_id(bpmp);
if (err < 0)
return err;
max_id = err;
dev_dbg(bpmp->dev, "maximum powergate ID: %u\n", max_id);
powergates = kcalloc(max_id + 1, sizeof(*powergates), GFP_KERNEL);
if (!powergates)
return -ENOMEM;
for (id = 0; id <= max_id; id++) {
struct tegra_powergate_info *info = &powergates[count];
info->name = tegra_bpmp_powergate_get_name(bpmp, id);
if (!info->name || info->name[0] == '\0') {
num_holes++;
continue;
}
info->id = id;
count++;
}
dev_dbg(bpmp->dev, "holes: %u\n", num_holes);
*powergatesp = powergates;
return count;
}
static int tegra_bpmp_add_powergates(struct tegra_bpmp *bpmp,
struct tegra_powergate_info *powergates,
unsigned int count)
{
struct genpd_onecell_data *genpd = &bpmp->genpd;
struct generic_pm_domain **domains;
struct tegra_powergate *powergate;
unsigned int i;
int err;
domains = kcalloc(count, sizeof(*domains), GFP_KERNEL);
if (!domains)
return -ENOMEM;
for (i = 0; i < count; i++) {
powergate = tegra_powergate_add(bpmp, &powergates[i]);
if (IS_ERR(powergate)) {
err = PTR_ERR(powergate);
goto remove;
}
dev_dbg(bpmp->dev, "added power domain %s\n",
powergate->genpd.name);
domains[i] = &powergate->genpd;
}
genpd->num_domains = count;
genpd->domains = domains;
return 0;
remove:
while (i--) {
powergate = to_tegra_powergate(domains[i]);
tegra_powergate_remove(powergate);
}
kfree(genpd->domains);
return err;
}
static void tegra_bpmp_remove_powergates(struct tegra_bpmp *bpmp)
{
struct genpd_onecell_data *genpd = &bpmp->genpd;
unsigned int i = genpd->num_domains;
struct tegra_powergate *powergate;
while (i--) {
dev_dbg(bpmp->dev, "removing power domain %s\n",
genpd->domains[i]->name);
powergate = to_tegra_powergate(genpd->domains[i]);
tegra_powergate_remove(powergate);
}
}
static struct generic_pm_domain *
tegra_powergate_xlate(struct of_phandle_args *spec, void *data)
{
struct generic_pm_domain *domain = ERR_PTR(-ENOENT);
struct genpd_onecell_data *genpd = data;
unsigned int i;
for (i = 0; i < genpd->num_domains; i++) {
struct tegra_powergate *powergate;
powergate = to_tegra_powergate(genpd->domains[i]);
if (powergate->id == spec->args[0]) {
domain = &powergate->genpd;
break;
}
}
return domain;
}
int tegra_bpmp_init_powergates(struct tegra_bpmp *bpmp)
{
struct device_node *np = bpmp->dev->of_node;
struct tegra_powergate_info *powergates;
struct device *dev = bpmp->dev;
unsigned int count, i;
int err;
err = tegra_bpmp_probe_powergates(bpmp, &powergates);
if (err < 0)
return err;
count = err;
dev_dbg(dev, "%u power domains probed\n", count);
err = tegra_bpmp_add_powergates(bpmp, powergates, count);
if (err < 0)
goto free;
bpmp->genpd.xlate = tegra_powergate_xlate;
err = of_genpd_add_provider_onecell(np, &bpmp->genpd);
if (err < 0) {
dev_err(dev, "failed to add power domain provider: %d\n", err);
tegra_bpmp_remove_powergates(bpmp);
}
free:
for (i = 0; i < count; i++)
kfree(powergates[i].name);
kfree(powergates);
return err;
}

View File

@ -0,0 +1,30 @@
/*
* Copyright (c) 2017 MediaTek Inc.
* Author: Mars.C <mars.cheng@mediatek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _DT_BINDINGS_POWER_MT6797_POWER_H
#define _DT_BINDINGS_POWER_MT6797_POWER_H
#define MT6797_POWER_DOMAIN_VDEC 0
#define MT6797_POWER_DOMAIN_VENC 1
#define MT6797_POWER_DOMAIN_ISP 2
#define MT6797_POWER_DOMAIN_MM 3
#define MT6797_POWER_DOMAIN_AUDIO 4
#define MT6797_POWER_DOMAIN_MFG_ASYNC 5
#define MT6797_POWER_DOMAIN_MFG 6
#define MT6797_POWER_DOMAIN_MFG_CORE0 7
#define MT6797_POWER_DOMAIN_MFG_CORE1 8
#define MT6797_POWER_DOMAIN_MFG_CORE2 9
#define MT6797_POWER_DOMAIN_MFG_CORE3 10
#define MT6797_POWER_DOMAIN_MJC 11
#endif /* _DT_BINDINGS_POWER_MT6797_POWER_H */

View File

@ -0,0 +1,108 @@
/*
* Copyright (C) 2016 Intel Corporation. All rights reserved
* Copyright (C) 2016 Altera Corporation. All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*
* derived from Steffen Trumtrar's "altr,rst-mgr-a10.h"
*/
#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_S10_H
#define _DT_BINDINGS_RESET_ALTR_RST_MGR_S10_H
/* MPUMODRST */
#define CPU0_RESET 0
#define CPU1_RESET 1
#define CPU2_RESET 2
#define CPU3_RESET 3
/* PER0MODRST */
#define EMAC0_RESET 32
#define EMAC1_RESET 33
#define EMAC2_RESET 34
#define USB0_RESET 35
#define USB1_RESET 36
#define NAND_RESET 37
/* 38 is empty */
#define SDMMC_RESET 39
#define EMAC0_OCP_RESET 40
#define EMAC1_OCP_RESET 41
#define EMAC2_OCP_RESET 42
#define USB0_OCP_RESET 43
#define USB1_OCP_RESET 44
#define NAND_OCP_RESET 45
/* 46 is empty */
#define SDMMC_OCP_RESET 47
#define DMA_RESET 48
#define SPIM0_RESET 49
#define SPIM1_RESET 50
#define SPIS0_RESET 51
#define SPIS1_RESET 52
#define DMA_OCP_RESET 53
#define EMAC_PTP_RESET 54
/* 55 is empty*/
#define DMAIF0_RESET 56
#define DMAIF1_RESET 57
#define DMAIF2_RESET 58
#define DMAIF3_RESET 59
#define DMAIF4_RESET 60
#define DMAIF5_RESET 61
#define DMAIF6_RESET 62
#define DMAIF7_RESET 63
/* PER1MODRST */
#define WATCHDOG0_RESET 64
#define WATCHDOG1_RESET 65
#define WATCHDOG2_RESET 66
#define WATCHDOG3_RESET 67
#define L4SYSTIMER0_RESET 68
#define L4SYSTIMER1_RESET 69
#define SPTIMER0_RESET 70
#define SPTIMER1_RESET 71
#define I2C0_RESET 72
#define I2C1_RESET 73
#define I2C2_RESET 74
#define I2C3_RESET 75
#define I2C4_RESET 76
/* 77-79 is empty */
#define UART0_RESET 80
#define UART1_RESET 81
/* 82-87 is empty */
#define GPIO0_RESET 88
#define GPIO1_RESET 89
/* BRGMODRST */
#define SOC2FPGA_RESET 96
#define LWHPS2FPGA_RESET 97
#define FPGA2SOC_RESET 98
#define F2SSDRAM0_RESET 99
#define F2SSDRAM1_RESET 100
#define F2SSDRAM2_RESET 101
#define DDRSCH_RESET 102
/* COLDMODRST */
#define CPUPO0_RESET 160
#define CPUPO1_RESET 161
#define CPUPO2_RESET 162
#define CPUPO3_RESET 163
/* 164-167 is empty */
#define L2_RESET 168
/* DBGMODRST */
#define DBG_RESET 224
#define CSDAP_RESET 225
/* TAPMODRST */
#define TAP_RESET 256
#endif

View File

@ -0,0 +1,36 @@
#ifndef _DT_BINDINGS_RESET_CORTINA_GEMINI_H
#define _DT_BINDINGS_RESET_CORTINA_GEMINI_H
#define GEMINI_RESET_DRAM 0
#define GEMINI_RESET_FLASH 1
#define GEMINI_RESET_IDE 2
#define GEMINI_RESET_RAID 3
#define GEMINI_RESET_SECURITY 4
#define GEMINI_RESET_GMAC0 5
#define GEMINI_RESET_GMAC1 6
#define GEMINI_RESET_PCI 7
#define GEMINI_RESET_USB0 8
#define GEMINI_RESET_USB1 9
#define GEMINI_RESET_DMAC 10
#define GEMINI_RESET_APB 11
#define GEMINI_RESET_LPC 12
#define GEMINI_RESET_LCD 13
#define GEMINI_RESET_INTCON0 14
#define GEMINI_RESET_INTCON1 15
#define GEMINI_RESET_RTC 16
#define GEMINI_RESET_TIMER 17
#define GEMINI_RESET_UART 18
#define GEMINI_RESET_SSP 19
#define GEMINI_RESET_GPIO0 20
#define GEMINI_RESET_GPIO1 21
#define GEMINI_RESET_GPIO2 22
#define GEMINI_RESET_WDOG 23
#define GEMINI_RESET_EXTERN 24
#define GEMINI_RESET_CIR 25
#define GEMINI_RESET_SATA0 26
#define GEMINI_RESET_SATA1 27
#define GEMINI_RESET_TVC 28
#define GEMINI_RESET_CPU1 30
#define GEMINI_RESET_GLOBAL 31
#endif

View File

@ -206,9 +206,13 @@ static inline void pm_genpd_syscore_poweron(struct device *dev) {}
/* OF PM domain providers */
struct of_device_id;
typedef struct generic_pm_domain *(*genpd_xlate_t)(struct of_phandle_args *args,
void *data);
struct genpd_onecell_data {
struct generic_pm_domain **domains;
unsigned int num_domains;
genpd_xlate_t xlate;
};
#ifdef CONFIG_PM_GENERIC_DOMAINS_OF

View File

@ -67,6 +67,9 @@ struct scpi_ops {
int (*dvfs_get_idx)(u8);
int (*dvfs_set_idx)(u8, u8);
struct scpi_dvfs_info *(*dvfs_get_info)(u8);
int (*device_domain_id)(struct device *);
int (*get_transition_latency)(struct device *);
int (*add_opps_to_device)(struct device *);
int (*sensor_get_capability)(u16 *sensors);
int (*sensor_get_info)(u16 sensor_id, struct scpi_sensor_info *);
int (*sensor_get_value)(u16, u64 *);

View File

@ -1,8 +1,7 @@
#ifndef __LINUX_SOC_RENESAS_RCAR_RST_H__
#define __LINUX_SOC_RENESAS_RCAR_RST_H__
#if defined(CONFIG_ARCH_RCAR_GEN1) || defined(CONFIG_ARCH_RCAR_GEN2) || \
defined(CONFIG_ARCH_R8A7795) || defined(CONFIG_ARCH_R8A7796)
#ifdef CONFIG_RST_RCAR
int rcar_rst_read_mode_pins(u32 *mode);
#else
static inline int rcar_rst_read_mode_pins(u32 *mode) { return -ENODEV; }

View File

@ -81,13 +81,18 @@
* Provides the MRQ number for the MRQ message: #mrq. The remainder of
* the MRQ message is a payload (immediately following the
* mrq_request) whose format depends on mrq.
*
* @todo document the flags
*/
struct mrq_request {
/** @brief MRQ number of the request */
uint32_t mrq;
/** @brief flags for the request */
/**
* @brief flags providing follow up directions to the receiver
*
* | Bit | Description |
* |-----|--------------------------------------------|
* | 1 | ring the sender's doorbell when responding |
* | 0 | should be 1 |
*/
uint32_t flags;
} __ABI_PACKED;
@ -99,13 +104,11 @@ struct mrq_request {
* remainder of the MRQ response is a payload (immediately following
* the mrq_response) whose format depends on the associated
* mrq_request::mrq
*
* @todo document the flags
*/
struct mrq_response {
/** @brief error code for the MRQ request itself */
int32_t err;
/** @brief flags for the response */
/** @brief reserved for future use */
uint32_t flags;
} __ABI_PACKED;
@ -147,6 +150,8 @@ struct mrq_response {
#define MRQ_ABI_RATCHET 29
#define MRQ_EMC_DVFS_LATENCY 31
#define MRQ_TRACE_ITER 64
#define MRQ_RINGBUF_CONSOLE 65
#define MRQ_PG 66
/** @} */
@ -155,7 +160,7 @@ struct mrq_response {
* @brief Maximum MRQ code to be sent by CPU software to
* BPMP. Subject to change in future
*/
#define MAX_CPU_MRQ_ID 64
#define MAX_CPU_MRQ_ID 66
/**
* @addtogroup MRQ_Payloads Message Payloads
@ -175,6 +180,7 @@ struct mrq_response {
* @defgroup Vhint CPU Voltage hint
* @defgroup MRQ_Deprecated Deprecated MRQ messages
* @defgroup EMC
* @defgroup RingbufConsole
* @}
*/
@ -637,7 +643,7 @@ struct mrq_debugfs_response {
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_reset_request
* * Response Payload: N/A
* * Response Payload: @ref mrq_reset_response
*/
/**
@ -647,6 +653,7 @@ enum mrq_reset_commands {
CMD_RESET_ASSERT = 1,
CMD_RESET_DEASSERT = 2,
CMD_RESET_MODULE = 3,
CMD_RESET_GET_MAX_ID = 4,
CMD_RESET_MAX, /* not part of ABI and subject to change */
};
@ -664,6 +671,38 @@ struct mrq_reset_request {
uint32_t reset_id;
} __ABI_PACKED;
/**
* @ingroup Reset
* @brief Response for MRQ_RESET sub-command CMD_RESET_GET_MAX_ID. When
* this sub-command is not supported, firmware will return -BPMP_EBADCMD
* in mrq_response::err.
*/
struct cmd_reset_get_max_id_response {
/** @brief max reset id */
uint32_t max_id;
} __ABI_PACKED;
/**
* @ingroup Reset
* @brief Response with MRQ_RESET
*
* Each sub-command supported by @ref mrq_reset_request may return
* sub-command-specific data. Some do and some do not as indicated
* in the following table
*
* | sub-command | payload |
* |----------------------|------------------|
* | CMD_RESET_ASSERT | - |
* | CMD_RESET_DEASSERT | - |
* | CMD_RESET_MODULE | - |
* | CMD_RESET_GET_MAX_ID | reset_get_max_id |
*/
struct mrq_reset_response {
union {
struct cmd_reset_get_max_id_response reset_get_max_id;
} __UNION_ANON;
} __ABI_PACKED;
/**
* @ingroup MRQ_Codes
* @def MRQ_I2C
@ -812,6 +851,17 @@ enum {
};
/** @} */
/**
* @name MRQ_CLK properties
* Flag bits for cmd_clk_properties_response::flags and
* cmd_clk_get_all_info_response::flags
* @{
*/
#define BPMP_CLK_HAS_MUX (1 << 0)
#define BPMP_CLK_HAS_SET_RATE (1 << 1)
#define BPMP_CLK_IS_ROOT (1 << 2)
/** @} */
#define MRQ_CLK_NAME_MAXLEN 40
#define MRQ_CLK_MAX_PARENTS 16
@ -1010,7 +1060,7 @@ struct mrq_clk_response {
*
* * Platforms: All
* * Initiators: Any
* * Targets: Any
* * Targets: Any except DMCE
* * Request Payload: @ref mrq_query_abi_request
* * Response Payload: @ref mrq_query_abi_response
*/
@ -1030,6 +1080,9 @@ struct mrq_query_abi_request {
/**
* @ingroup ABI_info
* @brief response to MRQ_QUERY_ABI
*
* @note mrq_response::err of 0 indicates that the query was
* successful, not that the MRQ itself is supported!
*/
struct mrq_query_abi_response {
/** @brief 0 if queried MRQ is supported. Else, -#BPMP_ENODEV */
@ -1080,7 +1133,9 @@ struct mrq_pg_read_state_response {
/**
* @ingroup MRQ_Codes
* @def MRQ_PG_UPDATE_STATE
* @brief modify the power-gating state of a partition
* @brief modify the power-gating state of a partition. In contrast to
* MRQ_PG calls, the operations that change state (on/off) of power
* partition are reference counted.
*
* * Platforms: T186
* * Initiators: Any
@ -1124,6 +1179,171 @@ struct mrq_pg_update_state_request {
} __ABI_PACKED;
/** @} */
/**
* @ingroup MRQ_Codes
* @def MRQ_PG
* @brief Control power-gating state of a partition. In contrast to
* MRQ_PG_UPDATE_STATE, operations that change the power partition
* state are NOT reference counted
*
* * Platforms: T186
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_pg_request
* * Response Payload: @ref mrq_pg_response
* @addtogroup Powergating
* @{
*/
/**
* @name MRQ_PG sub-commands
* @{
*/
enum mrq_pg_cmd {
/**
* @brief Check whether the BPMP driver supports the specified
* request type
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_PG_QUERY_ABI = 0,
/**
* @brief Set the current state of specified power domain. The
* possible values for power domains are defined in enum
* pg_states
*
* mrq_response:err is
* 0: Success
* -#BPMP_EINVAL: Invalid request parameters
*/
CMD_PG_SET_STATE = 1,
/**
* @brief Get the current state of specified power domain. The
* possible values for power domains are defined in enum
* pg_states
*
* mrq_response:err is
* 0: Success
* -#BPMP_EINVAL: Invalid request parameters
*/
CMD_PG_GET_STATE = 2,
/**
* @brief get the name string of specified power domain id.
*
* mrq_response:err is
* 0: Success
* -#BPMP_EINVAL: Invalid request parameters
*/
CMD_PG_GET_NAME = 3,
/**
* @brief get the highest power domain id in the system. Not
* all IDs between 0 and max_id are valid IDs.
*
* mrq_response:err is
* 0: Success
* -#BPMP_EINVAL: Invalid request parameters
*/
CMD_PG_GET_MAX_ID = 4,
};
/** @} */
#define MRQ_PG_NAME_MAXLEN 40
/**
* @brief possible power domain states in
* cmd_pg_set_state_request:state and cmd_pg_get_state_response:state.
* PG_STATE_OFF: power domain is OFF
* PG_STATE_ON: power domain is ON
* PG_STATE_RUNNING: power domain is ON and made into directly usable
* state by turning on the clocks associated with
* the domain
*/
enum pg_states {
PG_STATE_OFF = 0,
PG_STATE_ON = 1,
PG_STATE_RUNNING = 2,
};
struct cmd_pg_query_abi_request {
uint32_t type; /* enum mrq_pg_cmd */
} __ABI_PACKED;
struct cmd_pg_set_state_request {
uint32_t state; /* enum pg_states */
} __ABI_PACKED;
struct cmd_pg_get_state_response {
uint32_t state; /* enum pg_states */
} __ABI_PACKED;
struct cmd_pg_get_name_response {
uint8_t name[MRQ_PG_NAME_MAXLEN];
} __ABI_PACKED;
struct cmd_pg_get_max_id_response {
uint32_t max_id;
} __ABI_PACKED;
/**
* @ingroup Powergating
* @brief request with #MRQ_PG
*
* Used by the sender of an #MRQ_PG message to control power
* partitions. The pg_request is split into several sub-commands. Some
* sub-commands require no additional data. Others have a sub-command
* specific payload
*
* |sub-command |payload |
* |----------------------------|-----------------------|
* |CMD_PG_QUERY_ABI | query_abi |
* |CMD_PG_SET_STATE | set_state |
* |CMD_PG_GET_STATE | - |
* |CMD_PG_GET_NAME | - |
* |CMD_PG_GET_MAX_ID | - |
*
*/
struct mrq_pg_request {
uint32_t cmd;
uint32_t id;
union {
struct cmd_pg_query_abi_request query_abi;
struct cmd_pg_set_state_request set_state;
} __UNION_ANON;
} __ABI_PACKED;
/**
* @ingroup Powergating
* @brief response to MRQ_PG
*
* Each sub-command supported by @ref mrq_pg_request may return
* sub-command-specific data. Some do and some do not as indicated in
* the following table
*
* |sub-command |payload |
* |----------------------------|-----------------------|
* |CMD_PG_QUERY_ABI | - |
* |CMD_PG_SET_STATE | - |
* |CMD_PG_GET_STATE | get_state |
* |CMD_PG_GET_NAME | get_name |
* |CMD_PG_GET_MAX_ID | get_max_id |
*
*/
struct mrq_pg_response {
union {
struct cmd_pg_get_state_response get_state;
struct cmd_pg_get_name_response get_name;
struct cmd_pg_get_max_id_response get_max_id;
} __UNION_ANON;
} __ABI_PACKED;
/**
* @ingroup MRQ_Codes
* @def MRQ_THERMAL
@ -1529,6 +1749,184 @@ struct mrq_trace_iter_request {
/** @} */
/**
* @ingroup MRQ_Codes
* @def MRQ_RINGBUF_CONSOLE
* @brief A ring buffer debug console for BPMP
* @addtogroup RingbufConsole
*
* The ring buffer debug console aims to be a substitute for the UART debug
* console. The debug console is implemented with two ring buffers in the
* BPMP-FW, the RX (receive) and TX (transmit) buffers. Characters can be read
* and written to the buffers by the host via the MRQ interface.
*
* @{
*/
/**
* @brief Maximum number of bytes transferred in a single write command to the
* BPMP
*
* This is determined by the number of free bytes in the message struct,
* rounded down to a multiple of four.
*/
#define MRQ_RINGBUF_CONSOLE_MAX_WRITE_LEN 112
/**
* @brief Maximum number of bytes transferred in a single read command to the
* BPMP
*
* This is determined by the number of free bytes in the message struct,
* rounded down to a multiple of four.
*/
#define MRQ_RINGBUF_CONSOLE_MAX_READ_LEN 116
enum mrq_ringbuf_console_host_to_bpmp_cmd {
/**
* @brief Check whether the BPMP driver supports the specified request
* type
*
* mrq_response::err is 0 if the specified request is supported and
* -#BPMP_ENODEV otherwise
*/
CMD_RINGBUF_CONSOLE_QUERY_ABI = 0,
/**
* @brief Perform a read operation on the BPMP TX buffer
*
* mrq_response::err is 0
*/
CMD_RINGBUF_CONSOLE_READ = 1,
/**
* @brief Perform a write operation on the BPMP RX buffer
*
* mrq_response::err is 0 if the operation was successful and
* -#BPMP_ENODEV otherwise
*/
CMD_RINGBUF_CONSOLE_WRITE = 2,
/**
* @brief Get the length of the buffer and the physical addresses of
* the buffer data and the head and tail counters
*
* mrq_response::err is 0 if the operation was successful and
* -#BPMP_ENODEV otherwise
*/
CMD_RINGBUF_CONSOLE_GET_FIFO = 3,
};
/**
* @ingroup RingbufConsole
* @brief Host->BPMP request data for request type
* #CMD_RINGBUF_CONSOLE_QUERY_ABI
*/
struct cmd_ringbuf_console_query_abi_req {
/** @brief Command identifier to be queried */
uint32_t cmd;
} __ABI_PACKED;
/** @private */
struct cmd_ringbuf_console_query_abi_resp {
EMPTY
} __ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief Host->BPMP request data for request type #CMD_RINGBUF_CONSOLE_READ
*/
struct cmd_ringbuf_console_read_req {
/**
* @brief Number of bytes requested to be read from the BPMP TX buffer
*/
uint8_t len;
} __ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief BPMP->Host response data for request type #CMD_RINGBUF_CONSOLE_READ
*/
struct cmd_ringbuf_console_read_resp {
/** @brief The actual data read from the BPMP TX buffer */
uint8_t data[MRQ_RINGBUF_CONSOLE_MAX_READ_LEN];
/** @brief Number of bytes in cmd_ringbuf_console_read_resp::data */
uint8_t len;
} __ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief Host->BPMP request data for request type #CMD_RINGBUF_CONSOLE_WRITE
*/
struct cmd_ringbuf_console_write_req {
/** @brief The actual data to be written to the BPMP RX buffer */
uint8_t data[MRQ_RINGBUF_CONSOLE_MAX_WRITE_LEN];
/** @brief Number of bytes in cmd_ringbuf_console_write_req::data */
uint8_t len;
} __ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief BPMP->Host response data for request type #CMD_RINGBUF_CONSOLE_WRITE
*/
struct cmd_ringbuf_console_write_resp {
/** @brief Number of bytes of available space in the BPMP RX buffer */
uint32_t space_avail;
/** @brief Number of bytes that were written to the BPMP RX buffer */
uint8_t len;
} __ABI_PACKED;
/** @private */
struct cmd_ringbuf_console_get_fifo_req {
EMPTY
} __ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief BPMP->Host reply data for request type #CMD_RINGBUF_CONSOLE_GET_FIFO
*/
struct cmd_ringbuf_console_get_fifo_resp {
/** @brief Physical address of the BPMP TX buffer */
uint64_t bpmp_tx_buf_addr;
/** @brief Physical address of the BPMP TX buffer head counter */
uint64_t bpmp_tx_head_addr;
/** @brief Physical address of the BPMP TX buffer tail counter */
uint64_t bpmp_tx_tail_addr;
/** @brief Length of the BPMP TX buffer */
uint32_t bpmp_tx_buf_len;
} __ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief Host->BPMP request data.
*
* Reply type is union #mrq_ringbuf_console_bpmp_to_host_response .
*/
struct mrq_ringbuf_console_host_to_bpmp_request {
/**
* @brief type of request. Values listed in enum
* #mrq_ringbuf_console_host_to_bpmp_cmd.
*/
uint32_t type;
/** @brief request type specific parameters. */
union {
struct cmd_ringbuf_console_query_abi_req query_abi;
struct cmd_ringbuf_console_read_req read;
struct cmd_ringbuf_console_write_req write;
struct cmd_ringbuf_console_get_fifo_req get_fifo;
} __UNION_ANON;
} __ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief Host->BPMP reply data
*
* In response to struct #mrq_ringbuf_console_host_to_bpmp_request.
*/
union mrq_ringbuf_console_bpmp_to_host_response {
struct cmd_ringbuf_console_query_abi_resp query_abi;
struct cmd_ringbuf_console_read_resp read;
struct cmd_ringbuf_console_write_resp write;
struct cmd_ringbuf_console_get_fifo_resp get_fifo;
} __ABI_PACKED;
/** @} */
/*
* 4. Enumerations
*/

View File

@ -15,6 +15,7 @@
#define __SOC_TEGRA_BPMP_H
#include <linux/mailbox_client.h>
#include <linux/pm_domain.h>
#include <linux/reset-controller.h>
#include <linux/semaphore.h>
#include <linux/types.h>
@ -91,6 +92,8 @@ struct tegra_bpmp {
unsigned int num_clocks;
struct reset_controller_dev rstc;
struct genpd_onecell_data genpd;
};
struct tegra_bpmp *tegra_bpmp_get(struct device *dev);
@ -138,4 +141,13 @@ static inline int tegra_bpmp_init_resets(struct tegra_bpmp *bpmp)
}
#endif
#if IS_ENABLED(CONFIG_SOC_TEGRA_POWERGATE_BPMP)
int tegra_bpmp_init_powergates(struct tegra_bpmp *bpmp);
#else
static inline int tegra_bpmp_init_powergates(struct tegra_bpmp *bpmp)
{
return 0;
}
#endif
#endif /* __SOC_TEGRA_BPMP_H */