renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
Code

media: staging: media: atomisp: remove trailing whitespace

Browse Source 
Signed-off-by: Stephen Brennan <stephen@brennan.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit is contained in:
Stephen Brennan 2017-07-25 02:04:10 -04:00 committed by Mauro Carvalho Chehab
parent a827c1a96b
commit e7d59935d3
1 changed files with 8 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
drivers/staging/media/atomisp/i2c/ov2680.c
View File

@ -89,7 +89,7 @@ static int ov2680_read_reg(struct i2c_client *client,
"read from offset 0x%x error %d", reg, err);
return err;
}
*val = 0;
/* high byte comes first */
if (data_length == OV2680_8BIT)
@ -285,7 +285,6 @@ static int ov2680_g_fnumber(struct v4l2_subdev *sd, s32 *val)
static int ov2680_g_fnumber_range(struct v4l2_subdev *sd, s32 *val)
{
*val = (OV2680_F_NUMBER_DEFAULT_NUM << 24) |
(OV2680_F_NUMBER_DEM << 16) |
(OV2680_F_NUMBER_DEFAULT_NUM << 8) | OV2680_F_NUMBER_DEM;
@ -306,7 +305,7 @@ static int ov2680_g_bin_factor_y(struct v4l2_subdev *sd, s32 *val)
{
struct ov2680_device *dev = to_ov2680_sensor(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
*val = ov2680_res[dev->fmt_idx].bin_factor_y;
dev_dbg(&client->dev, "++++ov2680_g_bin_factor_y\n");
return 0;
@ -399,7 +398,7 @@ static long __ov2680_set_exposure(struct v4l2_subdev *sd, int coarse_itg,
struct ov2680_device *dev = to_ov2680_sensor(sd);
u16 vts,hts;
int ret,exp_val;
dev_dbg(&client->dev, "+++++++__ov2680_set_exposure coarse_itg %d, gain %d, digitgain %d++\n",coarse_itg, gain, digitgain);
hts = ov2680_res[dev->fmt_idx].pixels_per_line;
@ -542,7 +541,7 @@ static long ov2680_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
switch (cmd) {
case ATOMISP_IOC_S_EXPOSURE:
return ov2680_s_exposure(sd, arg);
default:
return -EINVAL;
}
@ -983,7 +982,7 @@ static int ov2680_s_power(struct v4l2_subdev *sd, int on)
if (on == 0){
ret = power_down(sd);
} else {
ret = power_up(sd);
ret = power_up(sd);
if (!ret)
return ov2680_init(sd);
}
@ -1207,7 +1206,7 @@ static int ov2680_s_stream(struct v4l2_subdev *sd, int enable)
dev_dbg(&client->dev, "ov2680_s_stream one \n");
else
dev_dbg(&client->dev, "ov2680_s_stream off \n");
ret = ov2680_write_reg(client, OV2680_8BIT, OV2680_SW_STREAM,
enable ? OV2680_START_STREAMING :
OV2680_STOP_STREAMING);
@ -1267,7 +1266,7 @@ static int ov2680_s_config(struct v4l2_subdev *sd,
dev_err(&client->dev, "ov2680_detect err s_config.\n");
goto fail_csi_cfg;
}
/* turn off sensor, after probed */
ret = power_down(sd);
if (ret) {
@ -1385,7 +1384,7 @@ static int ov2680_enum_frame_size(struct v4l2_subdev *sd,
static int ov2680_g_skip_frames(struct v4l2_subdev *sd, u32 *frames)
{
struct ov2680_device *dev = to_ov2680_sensor(sd);
mutex_lock(&dev->input_lock);
*frames = ov2680_res[dev->fmt_idx].skip_frames;
mutex_unlock(&dev->input_lock);