renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 03:33:59 +08:00
Code

Merge remote-tracking branch 'asoc/topic/cs4271' into asoc-next

Browse Source
This commit is contained in:
Mark Brown 2013-02-11 11:06:33 +00:00
commit e790245eb3
3 changed files with 61 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
Documentation/devicetree/bindings/sound/cs4271.txt
View File

@ -20,6 +20,18 @@ Optional properties:
!RESET pin
- cirrus,amuteb-eq-bmutec: When given, the Codec's AMUTEB=BMUTEC flag
is enabled.
- cirrus,enable-soft-reset:
The CS4271 requires its LRCLK and MCLK to be stable before its RESET
line is de-asserted. That also means that clocks cannot be changed
without putting the chip back into hardware reset, which also requires
a complete re-initialization of all registers.
One (undocumented) workaround is to assert and de-assert the PDN bit
in the MODE2 register. This workaround can be enabled with this DT
property.
Note that this is not needed in case the clocks are stable
throughout the entire runtime of the codec.
Examples:

15
include/sound/cs4271.h
View File

@ -20,6 +20,21 @@
struct cs4271_platform_data {
int gpio_nreset; /* GPIO driving Reset pin, if any */
bool amutec_eq_bmutec; /* flag to enable AMUTEC=BMUTEC */
/*
* The CS4271 requires its LRCLK and MCLK to be stable before its RESET
* line is de-asserted. That also means that clocks cannot be changed
* without putting the chip back into hardware reset, which also requires
* a complete re-initialization of all registers.
*
* One (undocumented) workaround is to assert and de-assert the PDN bit
* in the MODE2 register. This workaround can be enabled with the
* following flag.
*
* Note that this is not needed in case the clocks are stable
* throughout the entire runtime of the codec.
*/
bool enable_soft_reset;
};
#endif /* __CS4271_H */

34
sound/soc/codecs/cs4271.c
View File

@ -167,6 +167,8 @@ struct cs4271_private {
int gpio_nreset;
/* GPIO that disable serial bus, if any */
int gpio_disable;
/* enable soft reset workaround */
bool enable_soft_reset;
};
/*
@ -325,6 +327,33 @@ static int cs4271_hw_params(struct snd_pcm_substream *substream,
int i, ret;
unsigned int ratio, val;
if (cs4271->enable_soft_reset) {
/*
* Put the codec in soft reset and back again in case it's not
* currently streaming data. This way of bringing the codec in
* sync to the current clocks is not explicitly documented in
* the data sheet, but it seems to work fine, and in contrast
* to a read hardware reset, we don't have to sync back all
* registers every time.
*/
if ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
!dai->capture_active) ||
(substream->stream == SNDRV_PCM_STREAM_CAPTURE &&
!dai->playback_active)) {
ret = snd_soc_update_bits(codec, CS4271_MODE2,
CS4271_MODE2_PDN,
CS4271_MODE2_PDN);
if (ret < 0)
return ret;
ret = snd_soc_update_bits(codec, CS4271_MODE2,
CS4271_MODE2_PDN, 0);
if (ret < 0)
return ret;
}
}
cs4271->rate = params_rate(params);
/* Configure DAC */
@ -484,6 +513,10 @@ static int cs4271_probe(struct snd_soc_codec *codec)
if (of_get_property(codec->dev->of_node,
"cirrus,amutec-eq-bmutec", NULL))
amutec_eq_bmutec = true;
if (of_get_property(codec->dev->of_node,
"cirrus,enable-soft-reset", NULL))
cs4271->enable_soft_reset = true;
}
#endif
@ -492,6 +525,7 @@ static int cs4271_probe(struct snd_soc_codec *codec)
gpio_nreset = cs4271plat->gpio_nreset;
amutec_eq_bmutec = cs4271plat->amutec_eq_bmutec;
cs4271->enable_soft_reset = cs4271plat->enable_soft_reset;
}
if (gpio_nreset >= 0)