mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-18 02:04:05 +08:00
ARM: dts: sbc-t3x: add DVI display data
Add DSS related pinmux and display data nodes required to support DVI video out on SBC-T3530, SBC-T3730 and SBC-T3517. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
parent
f0199a29cf
commit
e5ee042b67
@ -134,3 +134,14 @@
|
||||
bus-width = <4>;
|
||||
cap-power-off-card;
|
||||
};
|
||||
|
||||
&dss {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&dss_dpi_pins_common
|
||||
&dss_dpi_pins_cm_t35x
|
||||
>;
|
||||
};
|
||||
|
||||
|
@ -46,3 +46,14 @@
|
||||
bus-width = <4>;
|
||||
cap-power-off-card;
|
||||
};
|
||||
|
||||
&dss {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&dss_dpi_pins_common
|
||||
&dss_dpi_pins_cm_t35x
|
||||
>;
|
||||
};
|
||||
|
||||
|
@ -31,6 +31,19 @@
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_wkup {
|
||||
dss_dpi_pins_cm_t3730: pinmux_dss_dpi_pins_cm_t3730 {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
|
||||
OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
|
||||
OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
|
||||
OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
|
||||
OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
|
||||
OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
|
||||
mmc2_pins: pinmux_mmc2_pins {
|
||||
@ -61,3 +74,14 @@
|
||||
bus-width = <4>;
|
||||
cap-power-off-card;
|
||||
};
|
||||
|
||||
&dss {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&dss_dpi_pins_common
|
||||
&dss_dpi_pins_cm_t3730
|
||||
>;
|
||||
};
|
||||
|
||||
|
@ -76,6 +76,45 @@
|
||||
OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4) /* sys_clkout2.gpio_186 */
|
||||
>;
|
||||
};
|
||||
|
||||
dss_dpi_pins_common: pinmux_dss_dpi_pins_common {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
|
||||
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
|
||||
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
|
||||
OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
|
||||
|
||||
OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
|
||||
OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
|
||||
OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
|
||||
OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
|
||||
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
|
||||
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
|
||||
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
|
||||
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
|
||||
OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
|
||||
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
|
||||
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
|
||||
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
|
||||
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
|
||||
OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
|
||||
OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
|
||||
OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
|
||||
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
|
||||
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
|
||||
>;
|
||||
};
|
||||
|
||||
dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
|
||||
OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
|
||||
OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
|
||||
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
|
||||
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
|
||||
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
|
@ -2,6 +2,49 @@
|
||||
* Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
|
||||
*/
|
||||
|
||||
/ {
|
||||
tfp410: encoder@0 {
|
||||
compatible = "ti,tfp410";
|
||||
|
||||
powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tfp410_pins>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
tfp410_in: endpoint@0 {
|
||||
remote-endpoint = <&dpi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
tfp410_out: endpoint@0 {
|
||||
remote-endpoint = <&dvi_connector_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dvi0: connector@0 {
|
||||
compatible = "dvi-connector";
|
||||
label = "dvi";
|
||||
|
||||
port {
|
||||
dvi_connector_in: endpoint {
|
||||
remote-endpoint = <&tfp410_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
smsc2_pins: pinmux_smsc2_pins {
|
||||
pinctrl-single,pins = <
|
||||
@ -9,6 +52,12 @@
|
||||
OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */
|
||||
>;
|
||||
};
|
||||
|
||||
tfp410_pins: pinmux_tfp410_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
|
@ -9,6 +9,10 @@
|
||||
model = "CompuLab SBC-T3517 with CM-T3517";
|
||||
compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
|
||||
|
||||
aliases {
|
||||
display0 = &dvi0;
|
||||
};
|
||||
|
||||
/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
|
||||
vddvario: regulator-vddvario-sb-t35 {
|
||||
compatible = "regulator-fixed";
|
||||
@ -54,3 +58,13 @@
|
||||
wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */
|
||||
cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
|
||||
};
|
||||
|
||||
&dss {
|
||||
port {
|
||||
dpi_out: endpoint {
|
||||
remote-endpoint = <&tfp410_in>;
|
||||
data-lines = <24>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -8,6 +8,10 @@
|
||||
/ {
|
||||
model = "CompuLab SBC-T3530 with CM-T3530";
|
||||
compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
|
||||
|
||||
aliases {
|
||||
display0 = &dvi0;
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
@ -34,3 +38,13 @@
|
||||
&mmc1 {
|
||||
cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&dss {
|
||||
port {
|
||||
dpi_out: endpoint {
|
||||
remote-endpoint = <&tfp410_in>;
|
||||
data-lines = <24>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -8,6 +8,10 @@
|
||||
/ {
|
||||
model = "CompuLab SBC-T3730 with CM-T3730";
|
||||
compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
|
||||
|
||||
aliases {
|
||||
display0 = &dvi0;
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
@ -25,3 +29,13 @@
|
||||
ranges = <5 0 0x2c000000 0x01000000>,
|
||||
<4 0 0x2d000000 0x01000000>;
|
||||
};
|
||||
|
||||
&dss {
|
||||
port {
|
||||
dpi_out: endpoint {
|
||||
remote-endpoint = <&tfp410_in>;
|
||||
data-lines = <24>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user