renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-19 18:53:52 +08:00
Code

ncr5380: Remove REAL_DMA and REAL_DMA_POLL macros

Browse Source 
For the NCR5380.c core driver, these macros are never used.
If REAL_DMA were to be defined, compilation would fail.

For the atari_NCR5380.c core driver, REAL_DMA is always defined.

Hence these macros are pointless.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit is contained in:
Finn Thain 2016-03-23 21:10:12 +11:00 committed by Martin K. Petersen
parent 7e9ec8d9cc
commit e4dec6806a
5 changed files with 22 additions and 415 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

218
drivers/scsi/NCR5380.c
View File

@ -35,18 +35,10 @@
* code so that everything does the same thing that's done at the
* end of a pseudo-DMA read operation.
*
* 2. Fix REAL_DMA (interrupt driven, polled works fine) -
* basically, transfer size needs to be reduced by one
* and the last byte read as is done with PSEUDO_DMA.
*
* 4. Test SCSI-II tagged queueing (I have no devices which support
* tagged queueing)
*/
#ifndef notyet
#undef REAL_DMA
#endif
#ifdef BOARD_REQUIRES_NO_DELAY
#define io_recovery_delay(x)
#else
@ -131,12 +123,6 @@
*
* PSEUDO_DMA - if defined, PSEUDO DMA is used during the data transfer phases.
*
* REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
*
* REAL_DMA_POLL - if defined, REAL DMA is used but the driver doesn't
* rely on phase mismatch and EOP interrupts to determine end
* of phase.
*
* These macros MUST be defined :
*
* NCR5380_read(register) - read from the specified register
@ -147,15 +133,9 @@
* specific implementation of the NCR5380
*
* Either real DMA *or* pseudo DMA may be implemented
* REAL functions :
* NCR5380_REAL_DMA should be defined if real DMA is to be used.
* Note that the DMA setup functions should return the number of bytes
* that they were able to program the controller for.
*
* Also note that generic i386/PC versions of these macros are
* available as NCR5380_i386_dma_write_setup,
* NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
*
* NCR5380_dma_write_setup(instance, src, count) - initialize
* NCR5380_dma_read_setup(instance, dst, count) - initialize
* NCR5380_dma_residual(instance); - residual count
@ -486,12 +466,6 @@ static void prepare_info(struct Scsi_Host *instance)
#ifdef DIFFERENTIAL
"DIFFERENTIAL "
#endif
#ifdef REAL_DMA
"REAL_DMA "
#endif
#ifdef REAL_DMA_POLL
"REAL_DMA_POLL "
#endif
#ifdef PARITY
"PARITY "
#endif
@ -551,9 +525,8 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags)
hostdata->id_higher_mask |= i;
for (i = 0; i < 8; ++i)
hostdata->busy[i] = 0;
#ifdef REAL_DMA
hostdata->dmalen = 0;
#endif
hostdata->dma_len = 0;
spin_lock_init(&hostdata->lock);
hostdata->connected = NULL;
hostdata->sensing = NULL;
@ -850,11 +823,7 @@ static void NCR5380_main(struct work_struct *work)
requeue_cmd(instance, cmd);
}
}
if (hostdata->connected
#ifdef REAL_DMA
&& !hostdata->dmalen
#endif
) {
if (hostdata->connected && !hostdata->dma_len) {
dsprintk(NDEBUG_MAIN, instance, "main: performing information transfer\n");
NCR5380_information_transfer(instance);
done = 0;
@ -919,34 +888,6 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id)
dsprintk(NDEBUG_INTR, instance, "IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n",
irq, basr, sr, mr);
#if defined(REAL_DMA)
if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) {
/* Probably End of DMA, Phase Mismatch or Loss of BSY.
* We ack IRQ after clearing Mode Register. Workarounds
* for End of DMA errata need to happen in DMA Mode.
*/
dsprintk(NDEBUG_INTR, instance, "interrupt in DMA mode\n");
int transferred;
if (!hostdata->connected)
panic("scsi%d : DMA interrupt with no connected cmd\n",
instance->hostno);
transferred = hostdata->dmalen - NCR5380_dma_residual(instance);
hostdata->connected->SCp.this_residual -= transferred;
hostdata->connected->SCp.ptr += transferred;
hostdata->dmalen = 0;
/* FIXME: we need to poll briefly then defer a workqueue task ! */
NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG, BASR_ACK, 0, 2 * HZ);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
} else
#endif /* REAL_DMA */
if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) &&
(sr & (SR_SEL | SR_IO | SR_BSY | SR_RST)) == (SR_SEL | SR_IO)) {
/* Probably reselected */
@ -1495,7 +1436,7 @@ timeout:
return -1;
}
#if defined(REAL_DMA) || defined(PSEUDO_DMA) || defined (REAL_DMA_POLL)
#if defined(PSEUDO_DMA)
/*
* Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
* unsigned char *phase, int *count, unsigned char **data)
@ -1525,34 +1466,14 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
register unsigned char *d = *data;
unsigned char tmp;
int foo;
#if defined(REAL_DMA_POLL)
int cnt, toPIO;
unsigned char saved_data = 0, overrun = 0, residue;
#endif
if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) {
*phase = tmp;
return -1;
}
#if defined(REAL_DMA) || defined(REAL_DMA_POLL)
if (p & SR_IO) {
if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS))
c -= 2;
}
hostdata->dma_len = (p & SR_IO) ? NCR5380_dma_read_setup(instance, d, c) : NCR5380_dma_write_setup(instance, d, c);
dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n",
(p & SR_IO) ? "receive" : "send", c, *data);
#endif
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
#ifdef REAL_DMA
NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
MR_ENABLE_EOP_INTR);
#elif defined(REAL_DMA_POLL)
NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY);
#else
/*
* Note : on my sample board, watch-dog timeouts occurred when interrupts
* were not disabled for the duration of a single DMA transfer, from
@ -1564,7 +1485,6 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
MR_ENABLE_EOP_INTR);
else
NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY);
#endif /* def REAL_DMA */
dprintk(NDEBUG_DMA, "scsi%d : mode reg = 0x%X\n", instance->host_no, NCR5380_read(MODE_REG));
@ -1584,14 +1504,8 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
io_recovery_delay(1);
}
#if defined(REAL_DMA_POLL)
do {
tmp = NCR5380_read(BUS_AND_STATUS_REG);
} while ((tmp & BASR_PHASE_MATCH) && !(tmp & (BASR_BUSY_ERROR | BASR_END_DMA_TRANSFER)));
/*
* At this point, either we've completed DMA, or we have a phase mismatch,
* or we've unexpectedly lost BUSY (which is a real error).
* A note regarding the DMA errata workarounds for early NMOS silicon.
*
* For DMA sends, we want to wait until the last byte has been
* transferred out over the bus before we turn off DMA mode. Alas, there
@ -1618,79 +1532,18 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
* properly, or the target switches to MESSAGE IN phase to signal a
* disconnection (either operation bringing the DMA to a clean halt).
* However, in order to handle scatter-receive, we must work around the
* problem. The chosen fix is to DMA N-2 bytes, then check for the
* problem. The chosen fix is to DMA fewer bytes, then check for the
* condition before taking the NCR5380 out of DMA mode. One or two extra
* bytes are transferred via PIO as necessary to fill out the original
* request.
*/
if (p & SR_IO) {
if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS)) {
udelay(10);
if ((NCR5380_read(BUS_AND_STATUS_REG) & (BASR_PHASE_MATCH | BASR_ACK)) ==
(BASR_PHASE_MATCH | BASR_ACK)) {
saved_data = NCR5380_read(INPUT_DATA_REGISTER);
overrun = 1;
}
}
} else {
int limit = 100;
while (((tmp = NCR5380_read(BUS_AND_STATUS_REG)) & BASR_ACK) || (NCR5380_read(STATUS_REG) & SR_REQ)) {
if (!(tmp & BASR_PHASE_MATCH))
break;
if (--limit < 0)
break;
}
}
dsprintk(NDEBUG_DMA, "polled DMA transfer complete, basr 0x%02x, sr 0x%02x\n",
tmp, NCR5380_read(STATUS_REG));
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
residue = NCR5380_dma_residual(instance);
c -= residue;
*count -= c;
*data += c;
*phase = NCR5380_read(STATUS_REG) & PHASE_MASK;
if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS) &&
*phase == p && (p & SR_IO) && residue == 0) {
if (overrun) {
dprintk(NDEBUG_DMA, "Got an input overrun, using saved byte\n");
**data = saved_data;
*data += 1;
*count -= 1;
cnt = toPIO = 1;
} else {
printk("No overrun??\n");
cnt = toPIO = 2;
}
dprintk(NDEBUG_DMA, "Doing %d-byte PIO to 0x%X\n", cnt, *data);
NCR5380_transfer_pio(instance, phase, &cnt, data);
*count -= toPIO - cnt;
}
dprintk(NDEBUG_DMA, "Return with data ptr = 0x%X, count %d, last 0x%X, next 0x%X\n", *data, *count, *(*data + *count - 1), *(*data + *count));
return 0;
#elif defined(REAL_DMA)
return 0;
#else /* defined(REAL_DMA_POLL) */
if (p & SR_IO) {
foo = NCR5380_pread(instance, d,
hostdata->flags & FLAG_NO_DMA_FIXUP ? c : c - 1);
if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) {
/*
* We can't disable DMA mode after successfully transferring
* what we plan to be the last byte, since that would open up
* a race condition where if the target asserted REQ before
* we got the DMA mode reset, the NCR5380 would have latched
* an additional byte into the INPUT DATA register and we'd
* have dropped it.
*
* The workaround was to transfer one fewer bytes than we
* The workaround was to transfer fewer bytes than we
* intended to with the pseudo-DMA read function, wait for
* the chip to latch the last byte, read it, and then disable
* pseudo-DMA mode.
@ -1738,9 +1591,8 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
*count = 0;
*phase = NCR5380_read(STATUS_REG) & PHASE_MASK;
return foo;
#endif /* def REAL_DMA */
}
#endif /* defined(REAL_DMA) | defined(PSEUDO_DMA) */
#endif /* PSEUDO_DMA */
/*
* Function : NCR5380_information_transfer (struct Scsi_Host *instance)
@ -1831,7 +1683,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
* in an unconditional loop.
*/
#if defined(PSEUDO_DMA) || defined(REAL_DMA_POLL)
#if defined(PSEUDO_DMA)
transfersize = 0;
if (!cmd->device->borken)
transfersize = NCR5380_dma_xfer_len(instance, cmd, phase);
@ -1855,7 +1707,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
} else
cmd->SCp.this_residual -= transfersize - len;
} else
#endif /* defined(PSEUDO_DMA) || defined(REAL_DMA_POLL) */
#endif /* PSEUDO_DMA */
{
/* Break up transfer into 3 ms chunks,
* presuming 6 accesses per handshake.
@ -2202,52 +2054,6 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
scmd_id(tmp), tmp->device->lun, tmp->tag);
}
/*
* Function : void NCR5380_dma_complete (struct Scsi_Host *instance)
*
* Purpose : called by interrupt handler when DMA finishes or a phase
* mismatch occurs (which would finish the DMA transfer).
*
* Inputs : instance - this instance of the NCR5380.
*
* Returns : pointer to the scsi_cmnd structure for which the I_T_L
* nexus has been reestablished, on failure NULL is returned.
*/
#ifdef REAL_DMA
static void NCR5380_dma_complete(NCR5380_instance * instance) {
struct NCR5380_hostdata *hostdata = shost_priv(instance);
int transferred;
/*
* XXX this might not be right.
*
* Wait for final byte to transfer, ie wait for ACK to go false.
*
* We should use the Last Byte Sent bit, unfortunately this is
* not available on the 5380/5381 (only the various CMOS chips)
*
* FIXME: timeout, and need to handle long timeout/irq case
*/
NCR5380_poll_politely(instance, BUS_AND_STATUS_REG, BASR_ACK, 0, 5*HZ);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
/*
* The only places we should see a phase mismatch and have to send
* data from the same set of pointers will be the data transfer
* phases. So, residual, requested length are only important here.
*/
if (!(hostdata->connected->SCp.phase & SR_CD)) {
transferred = instance->dmalen - NCR5380_dma_residual();
hostdata->connected->SCp.this_residual -= transferred;
hostdata->connected->SCp.ptr += transferred;
}
}
#endif /* def REAL_DMA */
/**
* list_find_cmd - test for presence of a command in a linked list
* @haystack: list of commands
@ -2359,9 +2165,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
if (hostdata->connected == cmd) {
dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd);
hostdata->connected = NULL;
#ifdef REAL_DMA
hostdata->dma_len = 0;
#endif
if (do_abort(instance)) {
set_host_byte(cmd, DID_ERROR);
complete_cmd(instance, cmd);
@ -2464,9 +2268,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
for (i = 0; i < 8; ++i)
hostdata->busy[i] = 0;
#ifdef REAL_DMA
hostdata->dma_len = 0;
#endif
queue_work(hostdata->work_q, &hostdata->main_task);
spin_unlock_irqrestore(&hostdata->lock, flags);

112
drivers/scsi/NCR5380.h
View File

@ -239,9 +239,7 @@ struct NCR5380_hostdata {
struct Scsi_Host *host; /* Host backpointer */
unsigned char id_mask, id_higher_mask; /* 1 << id, all bits greater */
unsigned char busy[8]; /* index = target, bit = lun */
#if defined(REAL_DMA) || defined(REAL_DMA_POLL)
int dma_len; /* requested length of DMA */
#endif
unsigned char last_message; /* last message OUT */
struct scsi_cmnd *connected; /* currently connected cmnd */
struct scsi_cmnd *selecting; /* cmnd to be connected */
@ -319,118 +317,8 @@ static void NCR5380_main(struct work_struct *work);
static const char *NCR5380_info(struct Scsi_Host *instance);
static void NCR5380_reselect(struct Scsi_Host *instance);
static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *, struct scsi_cmnd *);
#if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL)
static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
#endif
static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
#if (defined(REAL_DMA) || defined(REAL_DMA_POLL))
#if defined(i386) || defined(__alpha__)
/**
* NCR5380_pc_dma_setup - setup ISA DMA
* @instance: adapter to set up
* @ptr: block to transfer (virtual address)
* @count: number of bytes to transfer
* @mode: DMA controller mode to use
*
* Program the DMA controller ready to perform an ISA DMA transfer
* on this chip.
*
* Locks: takes and releases the ISA DMA lock.
*/
static __inline__ int NCR5380_pc_dma_setup(struct Scsi_Host *instance, unsigned char *ptr, unsigned int count, unsigned char mode)
{
unsigned limit;
unsigned long bus_addr = virt_to_bus(ptr);
unsigned long flags;
if (instance->dma_channel <= 3) {
if (count > 65536)
count = 65536;
limit = 65536 - (bus_addr & 0xFFFF);
} else {
if (count > 65536 * 2)
count = 65536 * 2;
limit = 65536 * 2 - (bus_addr & 0x1FFFF);
}
if (count > limit)
count = limit;
if ((count & 1) || (bus_addr & 1))
panic("scsi%d : attempted unaligned DMA transfer\n", instance->host_no);
flags=claim_dma_lock();
disable_dma(instance->dma_channel);
clear_dma_ff(instance->dma_channel);
set_dma_addr(instance->dma_channel, bus_addr);
set_dma_count(instance->dma_channel, count);
set_dma_mode(instance->dma_channel, mode);
enable_dma(instance->dma_channel);
release_dma_lock(flags);
return count;
}
/**
* NCR5380_pc_dma_write_setup - setup ISA DMA write
* @instance: adapter to set up
* @ptr: block to transfer (virtual address)
* @count: number of bytes to transfer
*
* Program the DMA controller ready to perform an ISA DMA write to the
* SCSI controller.
*
* Locks: called routines take and release the ISA DMA lock.
*/
static __inline__ int NCR5380_pc_dma_write_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count)
{
return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_WRITE);
}
/**
* NCR5380_pc_dma_read_setup - setup ISA DMA read
* @instance: adapter to set up
* @ptr: block to transfer (virtual address)
* @count: number of bytes to transfer
*
* Program the DMA controller ready to perform an ISA DMA read from the
* SCSI controller.
*
* Locks: called routines take and release the ISA DMA lock.
*/
static __inline__ int NCR5380_pc_dma_read_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count)
{
return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_READ);
}
/**
* NCR5380_pc_dma_residual - return bytes left
* @instance: adapter
*
* Reports the number of bytes left over after the DMA was terminated.
*
* Locks: takes and releases the ISA DMA lock.
*/
static __inline__ int NCR5380_pc_dma_residual(struct Scsi_Host *instance)
{
unsigned long flags;
int tmp;
flags = claim_dma_lock();
clear_dma_ff(instance->dma_channel);
tmp = get_dma_residue(instance->dma_channel);
release_dma_lock(flags);
return tmp;
}
#endif /* defined(i386) || defined(__alpha__) */
#endif /* defined(REAL_DMA) */
#endif /* __KERNEL__ */
#endif /* NCR5380_H */

62
drivers/scsi/atari_NCR5380.c
View File

@ -112,15 +112,9 @@
* specific implementation of the NCR5380
*
* Either real DMA *or* pseudo DMA may be implemented
* REAL functions :
* NCR5380_REAL_DMA should be defined if real DMA is to be used.
* Note that the DMA setup functions should return the number of bytes
* that they were able to program the controller for.
*
* Also note that generic i386/PC versions of these macros are
* available as NCR5380_i386_dma_write_setup,
* NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
*
* NCR5380_dma_write_setup(instance, src, count) - initialize
* NCR5380_dma_read_setup(instance, dst, count) - initialize
* NCR5380_dma_residual(instance); - residual count
@ -586,9 +580,6 @@ static void prepare_info(struct Scsi_Host *instance)
#ifdef DIFFERENTIAL
"DIFFERENTIAL "
#endif
#ifdef REAL_DMA
"REAL_DMA "
#endif
#ifdef PARITY
"PARITY "
#endif
@ -629,9 +620,8 @@ static int __init NCR5380_init(struct Scsi_Host *instance, int flags)
#ifdef SUPPORT_TAGS
init_tags(hostdata);
#endif
#if defined (REAL_DMA)
hostdata->dma_len = 0;
#endif
spin_lock_init(&hostdata->lock);
hostdata->connected = NULL;
hostdata->sensing = NULL;
@ -974,11 +964,7 @@ static void NCR5380_main(struct work_struct *work)
#endif
}
}
if (hostdata->connected
#ifdef REAL_DMA
&& !hostdata->dma_len
#endif
) {
if (hostdata->connected && !hostdata->dma_len) {
dsprintk(NDEBUG_MAIN, instance, "main: performing information transfer\n");
NCR5380_information_transfer(instance);
done = 0;
@ -990,7 +976,6 @@ static void NCR5380_main(struct work_struct *work)
}
#ifdef REAL_DMA
/*
* Function : void NCR5380_dma_complete (struct Scsi_Host *instance)
*
@ -1071,7 +1056,6 @@ static void NCR5380_dma_complete(struct Scsi_Host *instance)
}
}
}
#endif /* REAL_DMA */
/**
@ -1126,7 +1110,6 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id)
dsprintk(NDEBUG_INTR, instance, "IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n",
irq, basr, sr, mr);
#if defined(REAL_DMA)
if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) {
/* Probably End of DMA, Phase Mismatch or Loss of BSY.
* We ack IRQ after clearing Mode Register. Workarounds
@ -1142,9 +1125,7 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id)
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
}
} else
#endif /* REAL_DMA */
if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) &&
} else if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) &&
(sr & (SR_SEL | SR_IO | SR_BSY | SR_RST)) == (SR_SEL | SR_IO)) {
/* Probably reselected */
NCR5380_write(SELECT_ENABLE_REG, 0);
@ -1710,7 +1691,7 @@ timeout:
return -1;
}
#if defined(REAL_DMA)
/*
* Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
* unsigned char *phase, int *count, unsigned char **data)
@ -1819,7 +1800,6 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
return 0;
}
#endif /* defined(REAL_DMA) */
/*
* Function : NCR5380_information_transfer (struct Scsi_Host *instance)
@ -1866,7 +1846,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
}
#if defined(CONFIG_SUN3)
if (phase == PHASE_CMDOUT) {
#if defined(REAL_DMA)
void *d;
unsigned long count;
@ -1885,7 +1864,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
sun3_dma_setup_done = cmd;
}
}
#endif
#ifdef SUN3_SCSI_VME
dregs->csr |= CSR_INTR;
#endif
@ -1943,12 +1921,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
* in an unconditional loop.
*/
/* ++roman: I suggest, this should be
* #if def(REAL_DMA)
* instead of leaving REAL_DMA out.
*/
#if defined(REAL_DMA)
#if !defined(CONFIG_SUN3)
transfersize = 0;
if (!cmd->device->borken)
@ -1972,21 +1944,9 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
do_abort(instance);
cmd->result = DID_ERROR << 16;
/* XXX - need to source or sink data here, as appropriate */
} else {
#ifdef REAL_DMA
/* ++roman: When using real DMA,
* information_transfer() should return after
* starting DMA since it has nothing more to
* do.
*/
return;
#else
cmd->SCp.this_residual -= transfersize - len;
#endif
}
} else
#endif /* defined(REAL_DMA) */
{
return;
} else {
/* Break up transfer into 3 ms chunks,
* presuming 6 accesses per handshake.
*/
@ -1997,7 +1957,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
(unsigned char **)&cmd->SCp.ptr);
cmd->SCp.this_residual -= transfersize - len;
}
#if defined(CONFIG_SUN3) && defined(REAL_DMA)
#if defined(CONFIG_SUN3)
/* if we had intended to dma that command clear it */
if (sun3_dma_setup_done == cmd)
sun3_dma_setup_done = NULL;
@ -2305,7 +2265,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
return;
}
#if defined(CONFIG_SUN3) && defined(REAL_DMA)
#if defined(CONFIG_SUN3)
/* acknowledge toggle to MSGIN */
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(PHASE_MSGIN));
@ -2392,7 +2352,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
return;
}
#if defined(CONFIG_SUN3) && defined(REAL_DMA)
#if defined(CONFIG_SUN3)
/* engage dma setup for the command we just saw */
{
void *d;
@ -2555,9 +2515,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
if (hostdata->connected == cmd) {
dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd);
hostdata->connected = NULL;
#ifdef REAL_DMA
hostdata->dma_len = 0;
#endif
if (do_abort(instance)) {
set_host_byte(cmd, DID_ERROR);
complete_cmd(instance, cmd);
@ -2664,9 +2622,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
#endif
for (i = 0; i < 8; ++i)
hostdata->busy[i] = 0;
#ifdef REAL_DMA
hostdata->dma_len = 0;
#endif
queue_work(hostdata->work_q, &hostdata->main_task);
maybe_release_dma_irq(instance);

32
drivers/scsi/atari_scsi.c
View File

@ -85,7 +85,6 @@
/* Definitions for the core NCR5380 driver. */
#define REAL_DMA
#define SUPPORT_TAGS
#define MAX_TAGS 32
#define DMA_MIN_SIZE 32
@ -159,14 +158,11 @@ static inline unsigned long SCSI_DMA_GETADR(void)
return adr;
}
#ifdef REAL_DMA
static void atari_scsi_fetch_restbytes(void);
#endif
static unsigned char (*atari_scsi_reg_read)(unsigned char reg);
static void (*atari_scsi_reg_write)(unsigned char reg, unsigned char value);
#ifdef REAL_DMA
static unsigned long atari_dma_residual, atari_dma_startaddr;
static short atari_dma_active;
/* pointer to the dribble buffer */
@ -185,7 +181,6 @@ static char *atari_dma_orig_addr;
/* mask for address bits that can't be used with the ST-DMA */
static unsigned long atari_dma_stram_mask;
#define STRAM_ADDR(a) (((a) & atari_dma_stram_mask) == 0)
#endif
static int setup_can_queue = -1;
module_param(setup_can_queue, int, 0);
@ -201,8 +196,6 @@ static int setup_toshiba_delay = -1;
module_param(setup_toshiba_delay, int, 0);
#if defined(REAL_DMA)
static int scsi_dma_is_ignored_buserr(unsigned char dma_stat)
{
int i;
@ -255,12 +248,9 @@ static void scsi_dma_buserr(int irq, void *dummy)
}
#endif
#endif
static irqreturn_t scsi_tt_intr(int irq, void *dev)
{
#ifdef REAL_DMA
struct Scsi_Host *instance = dev;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
int dma_stat;
@ -342,8 +332,6 @@ static irqreturn_t scsi_tt_intr(int irq, void *dev)
tt_scsi_dma.dma_ctrl = 0;
}
#endif /* REAL_DMA */
NCR5380_intr(irq, dev);
return IRQ_HANDLED;
@ -352,7 +340,6 @@ static irqreturn_t scsi_tt_intr(int irq, void *dev)
static irqreturn_t scsi_falcon_intr(int irq, void *dev)
{
#ifdef REAL_DMA
struct Scsi_Host *instance = dev;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
int dma_stat;
@ -405,15 +392,12 @@ static irqreturn_t scsi_falcon_intr(int irq, void *dev)
atari_dma_orig_addr = NULL;
}
#endif /* REAL_DMA */
NCR5380_intr(irq, dev);
return IRQ_HANDLED;
}
#ifdef REAL_DMA
static void atari_scsi_fetch_restbytes(void)
{
int nr;
@ -436,7 +420,6 @@ static void atari_scsi_fetch_restbytes(void)
*dst++ = *src++;
}
}
#endif /* REAL_DMA */
/* This function releases the lock on the DMA chip if there is no
@ -508,8 +491,6 @@ __setup("atascsi=", atari_scsi_setup);
#endif /* !MODULE */
#if defined(REAL_DMA)
static unsigned long atari_scsi_dma_setup(struct Scsi_Host *instance,
void *data, unsigned long count,
int dir)
@ -703,9 +684,6 @@ static unsigned long atari_dma_xfer_len(unsigned long wanted_len,
}
#endif /* REAL_DMA */
/* NCR5380 register access functions
*
* There are separate functions for TT and Falcon, because the access
@ -745,7 +723,6 @@ static int atari_scsi_bus_reset(struct scsi_cmnd *cmd)
local_irq_save(flags);
#ifdef REAL_DMA
/* Abort a maybe active DMA transfer */
if (IS_A_TT()) {
tt_scsi_dma.dma_ctrl = 0;
@ -754,7 +731,6 @@ static int atari_scsi_bus_reset(struct scsi_cmnd *cmd)
atari_dma_active = 0;
atari_dma_orig_addr = NULL;
}
#endif
rv = NCR5380_bus_reset(cmd);
@ -850,8 +826,6 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
}
}
#ifdef REAL_DMA
/* If running on a Falcon and if there's TT-Ram (i.e., more than one
* memory block, since there's always ST-Ram in a Falcon), then
* allocate a STRAM_BUFFER_SIZE byte dribble buffer for transfers
@ -867,7 +841,6 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
atari_dma_phys_buffer = atari_stram_to_phys(atari_dma_buffer);
atari_dma_orig_addr = 0;
}
#endif
instance = scsi_host_alloc(&atari_scsi_template,
sizeof(struct NCR5380_hostdata));
@ -897,7 +870,7 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
goto fail_irq;
}
tt_mfp.active_edge |= 0x80; /* SCSI int on L->H */
#ifdef REAL_DMA
tt_scsi_dma.dma_ctrl = 0;
atari_dma_residual = 0;
@ -919,17 +892,14 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
hostdata->read_overruns = 4;
}
#endif
} else {
/* Nothing to do for the interrupt: the ST-DMA is initialized
* already.
*/
#ifdef REAL_DMA
atari_dma_residual = 0;
atari_dma_active = 0;
atari_dma_stram_mask = (ATARIHW_PRESENT(EXTD_DMA) ? 0x00000000
: 0xff000000);
#endif
}
NCR5380_maybe_reset_bus(instance);

9
drivers/scsi/sun3_scsi.c
View File

@ -38,7 +38,6 @@
/* Definitions for the core NCR5380 driver. */
#define REAL_DMA
/* #define SUPPORT_TAGS */
/* minimum number of bytes to do dma on */
#define DMA_MIN_SIZE 129
@ -527,15 +526,9 @@ static int __init sun3_scsi_probe(struct platform_device *pdev)
error = request_irq(instance->irq, scsi_sun3_intr, 0,
"NCR5380", instance);
if (error) {
#ifdef REAL_DMA
pr_err(PFX "scsi%d: IRQ %d not free, bailing out\n",
instance->host_no, instance->irq);
goto fail_irq;
#else
pr_warn(PFX "scsi%d: IRQ %d not free, interrupts disabled\n",
instance->host_no, instance->irq);
instance->irq = NO_IRQ;
#endif
}
dregs->csr = 0;
@ -565,7 +558,6 @@ static int __init sun3_scsi_probe(struct platform_device *pdev)
return 0;
fail_host:
if (instance->irq != NO_IRQ)
free_irq(instance->irq, instance);
fail_irq:
NCR5380_exit(instance);
@ -583,7 +575,6 @@ static int __exit sun3_scsi_remove(struct platform_device *pdev)
struct Scsi_Host *instance = platform_get_drvdata(pdev);
scsi_remove_host(instance);
if (instance->irq != NO_IRQ)
free_irq(instance->irq, instance);
NCR5380_exit(instance);
scsi_host_put(instance);