renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 20:23:57 +08:00
Code

serial: mpc52xx: add delay after resetting transmitter to fix broken chars

Browse Source 
This fixes receiving broken characters on the console from an MPC5125
system when systemd comes up which repeatedly opens and shuts down the
console device.

Trial and error with the needed interval showed that 500 us are good
enough most of the time when using 38400 Bd, so I think 1 ms is a good
compromise between fixing the issue and not penalize faster setups too
much.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Uwe Kleine-König 2015-09-24 21:18:34 +02:00 committed by Greg Kroah-Hartman
parent 0b1dd999b6
commit e4b4e3176f
1 changed files with 7 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
drivers/tty/serial/mpc52xx_uart.c
View File

@ -1135,6 +1135,13 @@ mpc52xx_uart_startup(struct uart_port *port)
psc_ops->command(port, MPC52xx_PSC_RST_RX);
psc_ops->command(port, MPC52xx_PSC_RST_TX);
/*
* According to Freescale's support the RST_TX command can produce a
* spike on the TX pin. So they recommend to delay "for one character".
* One millisecond should be enough for everyone.
*/
msleep(1);
psc_ops->set_sicr(port, 0); /* UART mode DCD ignored */
psc_ops->fifo_init(port);