MIPS: Check Loongson3 LL/SC errata workaround correctness

When Loongson3 LL/SC errata workarounds are enabled (ie.
CONFIG_CPU_LOONGSON3_WORKAROUNDS=y) run a tool to scan through the
compiled kernel & ensure that the workaround is applied correctly. That
is, ensure that:

  - Every LL or LLD instruction is preceded by a sync instruction.

  - Any branches from within an LL/SC loop to outside of that loop
    target a sync instruction.

Reasoning for these conditions can be found by reading the comment above
the definition of __SYNC_loongson3_war in arch/mips/include/asm/sync.h.

This tool will help ensure that we don't inadvertently introduce code
paths that miss the required workarounds.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org

arch/mips/Makefile

@@ -14,6 +14,9 @@
 
 archscripts: scripts_basic
 	$(Q)$(MAKE) $(build)=arch/mips/tools elf-entry
+ifeq ($(CONFIG_CPU_LOONGSON3_WORKAROUNDS),y)
+	$(Q)$(MAKE) $(build)=arch/mips/tools loongson3-llsc-check
+endif
 	$(Q)$(MAKE) $(build)=arch/mips/boot/tools relocs
 
 KBUILD_DEFCONFIG := 32r2el_defconfig

arch/mips/Makefile.postlink

@@ -3,7 +3,8 @@
 # Post-link MIPS pass
 # ===========================================================================
 #
-# 1. Insert relocations into vmlinux
+# 1. Check that Loongson3 LL/SC workarounds are applied correctly
+# 2. Insert relocations into vmlinux
 
 PHONY := __archpost
 __archpost:
@@ -11,6 +12,10 @@ __archpost:
 -include include/config/auto.conf
 include scripts/Kbuild.include
 
+CMD_LS3_LLSC = arch/mips/tools/loongson3-llsc-check
+quiet_cmd_ls3_llsc = LLSCCHK $@
+      cmd_ls3_llsc = $(CMD_LS3_LLSC) $@
+
 CMD_RELOCS = arch/mips/boot/tools/relocs
 quiet_cmd_relocs = RELOCS $@
       cmd_relocs = $(CMD_RELOCS) $@
@@ -19,6 +24,9 @@ quiet_cmd_relocs = RELOCS $@
 
 vmlinux: FORCE
 	@true
+ifeq ($(CONFIG_CPU_LOONGSON3_WORKAROUNDS),y)
+	$(call if_changed,ls3_llsc)
+endif
 ifeq ($(CONFIG_RELOCATABLE),y)
 	$(call if_changed,relocs)
 endif

arch/mips/tools/.gitignore

@@ -1 +1,2 @@
 elf-entry
+loongson3-llsc-check

arch/mips/tools/Makefile

@@ -3,3 +3,8 @@ hostprogs-y := elf-entry
 PHONY += elf-entry
 elf-entry: $(obj)/elf-entry
 	@:
+
+hostprogs-$(CONFIG_CPU_LOONGSON3_WORKAROUNDS) += loongson3-llsc-check
+PHONY += loongson3-llsc-check
+loongson3-llsc-check: $(obj)/loongson3-llsc-check
+	@:

arch/mips/tools/loongson3-llsc-check.c

@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <byteswap.h>
+#include <elf.h>
+#include <endian.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <inttypes.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <unistd.h>
+
+#ifdef be32toh
+/* If libc provides le{16,32,64}toh() then we'll use them */
+#elif BYTE_ORDER == LITTLE_ENDIAN
+# define le16toh(x)	(x)
+# define le32toh(x)	(x)
+# define le64toh(x)	(x)
+#elif BYTE_ORDER == BIG_ENDIAN
+# define le16toh(x)	bswap_16(x)
+# define le32toh(x)	bswap_32(x)
+# define le64toh(x)	bswap_64(x)
+#endif
+
+/* MIPS opcodes, in bits 31:26 of an instruction */
+#define OP_SPECIAL	0x00
+#define OP_REGIMM	0x01
+#define OP_BEQ		0x04
+#define OP_BNE		0x05
+#define OP_BLEZ		0x06
+#define OP_BGTZ		0x07
+#define OP_BEQL		0x14
+#define OP_BNEL		0x15
+#define OP_BLEZL	0x16
+#define OP_BGTZL	0x17
+#define OP_LL		0x30
+#define OP_LLD		0x34
+#define OP_SC		0x38
+#define OP_SCD		0x3c
+
+/* Bits 20:16 of OP_REGIMM instructions */
+#define REGIMM_BLTZ	0x00
+#define REGIMM_BGEZ	0x01
+#define REGIMM_BLTZL	0x02
+#define REGIMM_BGEZL	0x03
+#define REGIMM_BLTZAL	0x10
+#define REGIMM_BGEZAL	0x11
+#define REGIMM_BLTZALL	0x12
+#define REGIMM_BGEZALL	0x13
+
+/* Bits 5:0 of OP_SPECIAL instructions */
+#define SPECIAL_SYNC	0x0f
+
+static void usage(FILE *f)
+{
+	fprintf(f, "Usage: loongson3-llsc-check /path/to/vmlinux\n");
+}
+
+static int se16(uint16_t x)
+{
+	return (int16_t)x;
+}
+
+static bool is_ll(uint32_t insn)
+{
+	switch (insn >> 26) {
+	case OP_LL:
+	case OP_LLD:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static bool is_sc(uint32_t insn)
+{
+	switch (insn >> 26) {
+	case OP_SC:
+	case OP_SCD:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static bool is_sync(uint32_t insn)
+{
+	/* Bits 31:11 should all be zeroes */
+	if (insn >> 11)
+		return false;
+
+	/* Bits 5:0 specify the SYNC special encoding */
+	if ((insn & 0x3f) != SPECIAL_SYNC)
+		return false;
+
+	return true;
+}
+
+static bool is_branch(uint32_t insn, int *off)
+{
+	switch (insn >> 26) {
+	case OP_BEQ:
+	case OP_BEQL:
+	case OP_BNE:
+	case OP_BNEL:
+	case OP_BGTZ:
+	case OP_BGTZL:
+	case OP_BLEZ:
+	case OP_BLEZL:
+		*off = se16(insn) + 1;
+		return true;
+
+	case OP_REGIMM:
+		switch ((insn >> 16) & 0x1f) {
+		case REGIMM_BGEZ:
+		case REGIMM_BGEZL:
+		case REGIMM_BGEZAL:
+		case REGIMM_BGEZALL:
+		case REGIMM_BLTZ:
+		case REGIMM_BLTZL:
+		case REGIMM_BLTZAL:
+		case REGIMM_BLTZALL:
+			*off = se16(insn) + 1;
+			return true;
+
+		default:
+			return false;
+		}
+
+	default:
+		return false;
+	}
+}
+
+static int check_ll(uint64_t pc, uint32_t *code, size_t sz)
+{
+	ssize_t i, max, sc_pos;
+	int off;
+
+	/*
+	 * Every LL must be preceded by a sync instruction in order to ensure
+	 * that instruction reordering doesn't allow a prior memory access to
+	 * execute after the LL & cause erroneous results.
+	 */
+	if (!is_sync(le32toh(code[-1]))) {
+		fprintf(stderr, "%" PRIx64 ": LL not preceded by sync\n", pc);
+		return -EINVAL;
+	}
+
+	/* Find the matching SC instruction */
+	max = sz / 4;
+	for (sc_pos = 0; sc_pos < max; sc_pos++) {
+		if (is_sc(le32toh(code[sc_pos])))
+			break;
+	}
+	if (sc_pos >= max) {
+		fprintf(stderr, "%" PRIx64 ": LL has no matching SC\n", pc);
+		return -EINVAL;
+	}
+
+	/*
+	 * Check branches within the LL/SC loop target sync instructions,
+	 * ensuring that speculative execution can't generate memory accesses
+	 * due to instructions outside of the loop.
+	 */
+	for (i = 0; i < sc_pos; i++) {
+		if (!is_branch(le32toh(code[i]), &off))
+			continue;
+
+		/*
+		 * If the branch target is within the LL/SC loop then we don't
+		 * need to worry about it.
+		 */
+		if ((off >= -i) && (off <= sc_pos))
+			continue;
+
+		/* If the branch targets a sync instruction we're all good... */
+		if (is_sync(le32toh(code[i + off])))
+			continue;
+
+		/* ...but if not, we have a problem */
+		fprintf(stderr, "%" PRIx64 ": Branch target not a sync\n",
+			pc + (i * 4));
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int check_code(uint64_t pc, uint32_t *code, size_t sz)
+{
+	int err = 0;
+
+	if (sz % 4) {
+		fprintf(stderr, "%" PRIx64 ": Section size not a multiple of 4\n",
+			pc);
+		err = -EINVAL;
+		sz -= (sz % 4);
+	}
+
+	if (is_ll(le32toh(code[0]))) {
+		fprintf(stderr, "%" PRIx64 ": First instruction in section is an LL\n",
+			pc);
+		err = -EINVAL;
+	}
+
+#define advance() (	\
+	code++,		\
+	pc += 4,	\
+	sz -= 4		\
+)
+
+	/*
+	 * Skip the first instructionm allowing check_ll to look backwards
+	 * unconditionally.
+	 */
+	advance();
+
+	/* Now scan through the code looking for LL instructions */
+	for (; sz; advance()) {
+		if (is_ll(le32toh(code[0])))
+			err |= check_ll(pc, code, sz);
+	}
+
+	return err;
+}
+
+int main(int argc, char *argv[])
+{
+	int vmlinux_fd, status, err, i;
+	const char *vmlinux_path;
+	struct stat st;
+	Elf64_Ehdr *eh;
+	Elf64_Shdr *sh;
+	void *vmlinux;
+
+	status = EXIT_FAILURE;
+
+	if (argc < 2) {
+		usage(stderr);
+		goto out_ret;
+	}
+
+	vmlinux_path = argv[1];
+	vmlinux_fd = open(vmlinux_path, O_RDONLY);
+	if (vmlinux_fd == -1) {
+		perror("Unable to open vmlinux");
+		goto out_ret;
+	}
+
+	err = fstat(vmlinux_fd, &st);
+	if (err) {
+		perror("Unable to stat vmlinux");
+		goto out_close;
+	}
+
+	vmlinux = mmap(NULL, st.st_size, PROT_READ, MAP_PRIVATE, vmlinux_fd, 0);
+	if (vmlinux == MAP_FAILED) {
+		perror("Unable to mmap vmlinux");
+		goto out_close;
+	}
+
+	eh = vmlinux;
+	if (memcmp(eh->e_ident, ELFMAG, SELFMAG)) {
+		fprintf(stderr, "vmlinux is not an ELF?\n");
+		goto out_munmap;
+	}
+
+	if (eh->e_ident[EI_CLASS] != ELFCLASS64) {
+		fprintf(stderr, "vmlinux is not 64b?\n");
+		goto out_munmap;
+	}
+
+	if (eh->e_ident[EI_DATA] != ELFDATA2LSB) {
+		fprintf(stderr, "vmlinux is not little endian?\n");
+		goto out_munmap;
+	}
+
+	for (i = 0; i < le16toh(eh->e_shnum); i++) {
+		sh = vmlinux + le64toh(eh->e_shoff) + (i * le16toh(eh->e_shentsize));
+
+		if (sh->sh_type != SHT_PROGBITS)
+			continue;
+		if (!(sh->sh_flags & SHF_EXECINSTR))
+			continue;
+
+		err = check_code(le64toh(sh->sh_addr),
+				 vmlinux + le64toh(sh->sh_offset),
+				 le64toh(sh->sh_size));
+		if (err)
+			goto out_munmap;
+	}
+
+	status = EXIT_SUCCESS;
+out_munmap:
+	munmap(vmlinux, st.st_size);
+out_close:
+	close(vmlinux_fd);
+out_ret:
+	return status;
+}