mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 03:33:59 +08:00
ARM: dts: rockchip: enable gmac on RK3288 evb board
enable gmac in rk3288-evb-rk808.dts changes since v2: 1. add fixed regulator for PHY 2. remove power-gpio, reset-gpio, phyirq-gpio, pmu_regulator setting 3. add "snps,reset-gpio", "snps,reset-active-low;" "snps,reset-delays-us" Signed-off-by: Roger Chen <roger.chen@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
3d3fb74afc
commit
e35e47ac52
@ -15,6 +15,13 @@
|
||||
|
||||
/ {
|
||||
compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
|
||||
|
||||
ext_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "ext_gmac";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
@ -152,3 +159,19 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac {
|
||||
phy_regulator = "vcc_phy";
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "input";
|
||||
snps,reset-gpio = <&gpio4 7 0>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 1000000>;
|
||||
assigned-clocks = <&cru SCLK_MAC>;
|
||||
assigned-clock-parents = <&ext_gmac>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
tx_delay = <0x30>;
|
||||
rx_delay = <0x10>;
|
||||
status = "ok";
|
||||
};
|
||||
|
@ -90,6 +90,17 @@
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc_phy: vcc-phy-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ð_phy_pwr>;
|
||||
regulator-name = "vcc_phy";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&emmc {
|
||||
@ -178,6 +189,12 @@
|
||||
rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
eth_phy {
|
||||
eth_phy_pwr: eth-phy-pwr {
|
||||
rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
|
Loading…
Reference in New Issue
Block a user