renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-18 10:13:57 +08:00
Code

sound fixes for 4.6-rc6

Browse Source 
Usually we get a big collection of fixes for ASoC once during rc.
 And this is it.
 
 At this time, most of fixes are about Intel Skylake ASoC driver, which
 is a new and still on-going development.  Along with it, a slight
 large LOC is seen in legacy HD-audio driver, but it's merely a code
 move to the upper layer.
 
 Other than that, the rest are small or trivial fixes to various
 drivers, in addition to an ASoC dapm debugfs code fix.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXIgKpAAoJEGwxgFQ9KSmkNYQP/1Fzw/1Of+6ONNSO0mhTrFsZ
 KcYkKBlWTXLgzV5KTmcxhtx66QP8Z1S6yUNVxeeW8sWlW+F8CRdpGMhWaXcxpiRl
 uhuOO6qWIa96U0U8huFN3hvcUDjdEUJTS/cyMK2FD253qIWkZlZifSgPJRxeWKg2
 EBfIICz14UKWusk5Frqb/mD3QGmkh9P4wd/Z2y+4p+TNrpCFKGOcHo8LKI4JscXo
 bhQduiQ0LsGWFfNfdzd9KX6G5XAE+pu7hc9VYDE1X89Ih/pMzdJGqwy9dyDBokh6
 ucE+y3E715r/CS19vZ6l9p/4s+b5gUVvXBAk2MjFo/3/HOfoMqCz/ECi3PTfuc7c
 CcmJq8A2KifOgGc7/yi4apajn5THUpQmQuQAharlipB1Y/vWZxKUo4eX7RGjJnaq
 /peXevea96ilpajankQ1Et8LwsvklxzGAQ5J1ONtR7x8pqiOJ7mVL5Cp0GU3Cg1J
 BHIKWPm+Dv5piMtke0/7JSYIbxL5zzgmltqfYY44wnAzEvAcehv4u7zDE/BQdPo8
 l8oLxgTsyAaBj+4YCUtlSWQjCyBifK8kD1OsRqak+jqYg6rl/uug7Cau7qAcpOyG
 IWSnQbLyP3YfcLNagtqyqru35Q4w1F1NRpZFwe2XLNbsG6hM5Ea/y0QKbCUS/ncn
 IkQPkrdx3+h/3PGNLo+P
 =ju49
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Usually we get a big collection of fixes for ASoC once during rc.  And
  this is it.

  At this time, most of fixes are about Intel Skylake ASoC driver, which
  is a new and still on-going development.  Along with it, a slight
  large LOC is seen in legacy HD-audio driver, but it's merely a code
  move to the upper layer.

  Other than that, the rest are small or trivial fixes to various
  drivers, in addition to an ASoC dapm debugfs code fix"

* tag 'sound-4.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
  ALSA: hda - Update BCLK also at hotplug for i915 HSW/BDW
  ALSA: hda - Add dock support for ThinkPad X260
  ASoC: wm5102: Free compressed IRQ in CODEC remove
  ASoC: arizona: Free speaker thermal IRQs in CODEC remove
  ASoC: Intel: Skylake: Fix ibs/obs calc for non-integral sampling rates
  ASoC: Intel: sst: fix a loop timeout in sst_hsw_stream_reset()
  ASoC: Intel: Skylake: Fix to turn OFF codec power when entering S3
  ASoC: hdac_hdmi: Fix codec power state in S3 during playback
  ASoC: hdac_hdmi: Fix to use dev_pm ops instead soc pm
  ASoC: wm8962: Correct typo when setting DSPCLK rate
  ASoC: nau8825: Fix jack detection across suspend
  ASoC: Intel: Skylake: Fix DSP resource de-allocation
  ASoC: Intel: Skylake: Fix for unloading module only when it is loaded
  ASoC: Intel: Skylake: Fix kbuild dependency
  ASoC: dapm: Make sure we have a card when displaying component widgets
  ASoC: rt5640: Correct the digital interface data select
  ASoC: Intel: Skylake: remove call to pci_dev_put
  ASoC: Intel: Skylake: Call i915 exit last
  ASoC: Intel: Skylake: Unmap the address last
  ASoC: Intel: Skylake: Freeup properly on skl_dsp_free
  ...
This commit is contained in:
Linus Torvalds 2016-04-28 19:38:45 -07:00
commit e1f14a5469
27 changed files with 302 additions and 227 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
include/sound/hda_i915.h
View File

@ -9,7 +9,7 @@
#ifdef CONFIG_SND_HDA_I915
int snd_hdac_set_codec_wakeup(struct hdac_bus *bus, bool enable);
int snd_hdac_display_power(struct hdac_bus *bus, bool enable);
int snd_hdac_get_display_clk(struct hdac_bus *bus);
void snd_hdac_i915_set_bclk(struct hdac_bus *bus);
int snd_hdac_sync_audio_rate(struct hdac_bus *bus, hda_nid_t nid, int rate);
int snd_hdac_acomp_get_eld(struct hdac_bus *bus, hda_nid_t nid,
bool *audio_enabled, char *buffer, int max_bytes);
@ -25,9 +25,8 @@ static inline int snd_hdac_display_power(struct hdac_bus *bus, bool enable)
{
return 0;
}
static inline int snd_hdac_get_display_clk(struct hdac_bus *bus)
static inline void snd_hdac_i915_set_bclk(struct hdac_bus *bus)
{
return 0;
}
static inline int snd_hdac_sync_audio_rate(struct hdac_bus *bus, hda_nid_t nid,
int rate)

5
sound/hda/ext/hdac_ext_stream.c
View File

@ -104,12 +104,11 @@ EXPORT_SYMBOL_GPL(snd_hdac_ext_stream_init_all);
*/
void snd_hdac_stream_free_all(struct hdac_ext_bus *ebus)
{
struct hdac_stream *s;
struct hdac_stream *s, *_s;
struct hdac_ext_stream *stream;
struct hdac_bus *bus = ebus_to_hbus(ebus);
while (!list_empty(&bus->stream_list)) {
s = list_first_entry(&bus->stream_list, struct hdac_stream, list);
list_for_each_entry_safe(s, _s, &bus->stream_list, list) {
stream = stream_to_hdac_ext_stream(s);
snd_hdac_ext_stream_decouple(ebus, stream, false);
list_del(&s->list);

60
sound/hda/hdac_i915.c
View File

@ -20,6 +20,7 @@
#include <sound/core.h>
#include <sound/hdaudio.h>
#include <sound/hda_i915.h>
#include <sound/hda_register.h>
static struct i915_audio_component *hdac_acomp;
@ -97,26 +98,65 @@ int snd_hdac_display_power(struct hdac_bus *bus, bool enable)
}
EXPORT_SYMBOL_GPL(snd_hdac_display_power);
#define CONTROLLER_IN_GPU(pci) (((pci)->device == 0x0a0c) || \
((pci)->device == 0x0c0c) || \
((pci)->device == 0x0d0c) || \
((pci)->device == 0x160c))
/**
* snd_hdac_get_display_clk - Get CDCLK in kHz
* snd_hdac_i915_set_bclk - Reprogram BCLK for HSW/BDW
* @bus: HDA core bus
*
* This function is supposed to be used only by a HD-audio controller
* driver that needs the interaction with i915 graphics.
* Intel HSW/BDW display HDA controller is in GPU. Both its power and link BCLK
* depends on GPU. Two Extended Mode registers EM4 (M value) and EM5 (N Value)
* are used to convert CDClk (Core Display Clock) to 24MHz BCLK:
* BCLK = CDCLK * M / N
* The values will be lost when the display power well is disabled and need to
* be restored to avoid abnormal playback speed.
*
* This function queries CDCLK value in kHz from the graphics driver and
* returns the value. A negative code is returned in error.
* Call this function at initializing and changing power well, as well as
* at ELD notifier for the hotplug.
*/
int snd_hdac_get_display_clk(struct hdac_bus *bus)
void snd_hdac_i915_set_bclk(struct hdac_bus *bus)
{
struct i915_audio_component *acomp = bus->audio_component;
struct pci_dev *pci = to_pci_dev(bus->dev);
int cdclk_freq;
unsigned int bclk_m, bclk_n;
if (!acomp || !acomp->ops)
return -ENODEV;
if (!acomp || !acomp->ops || !acomp->ops->get_cdclk_freq)
return; /* only for i915 binding */
if (!CONTROLLER_IN_GPU(pci))
return; /* only HSW/BDW */
return acomp->ops->get_cdclk_freq(acomp->dev);
cdclk_freq = acomp->ops->get_cdclk_freq(acomp->dev);
switch (cdclk_freq) {
case 337500:
bclk_m = 16;
bclk_n = 225;
break;
case 450000:
default: /* default CDCLK 450MHz */
bclk_m = 4;
bclk_n = 75;
break;
case 540000:
bclk_m = 4;
bclk_n = 90;
break;
case 675000:
bclk_m = 8;
bclk_n = 225;
break;
}
EXPORT_SYMBOL_GPL(snd_hdac_get_display_clk);
snd_hdac_chip_writew(bus, HSW_EM4, bclk_m);
snd_hdac_chip_writew(bus, HSW_EM5, bclk_n);
}
EXPORT_SYMBOL_GPL(snd_hdac_i915_set_bclk);
/* There is a fixed mapping between audio pin node and display port
* on current Intel platforms:

56
sound/pci/hda/hda_intel.c
View File

@ -857,50 +857,6 @@ static int param_set_xint(const char *val, const struct kernel_param *kp)
#define azx_del_card_list(chip) /* NOP */
#endif /* CONFIG_PM */
/* Intel HSW/BDW display HDA controller is in GPU. Both its power and link BCLK
* depends on GPU. Two Extended Mode registers EM4 (M value) and EM5 (N Value)
* are used to convert CDClk (Core Display Clock) to 24MHz BCLK:
* BCLK = CDCLK * M / N
* The values will be lost when the display power well is disabled and need to
* be restored to avoid abnormal playback speed.
*/
static void haswell_set_bclk(struct hda_intel *hda)
{
struct azx *chip = &hda->chip;
int cdclk_freq;
unsigned int bclk_m, bclk_n;
if (!hda->need_i915_power)
return;
cdclk_freq = snd_hdac_get_display_clk(azx_bus(chip));
switch (cdclk_freq) {
case 337500:
bclk_m = 16;
bclk_n = 225;
break;
case 450000:
default: /* default CDCLK 450MHz */
bclk_m = 4;
bclk_n = 75;
break;
case 540000:
bclk_m = 4;
bclk_n = 90;
break;
case 675000:
bclk_m = 8;
bclk_n = 225;
break;
}
azx_writew(chip, HSW_EM4, bclk_m);
azx_writew(chip, HSW_EM5, bclk_n);
}
#if defined(CONFIG_PM_SLEEP) || defined(SUPPORT_VGA_SWITCHEROO)
/*
* power management
@ -958,7 +914,7 @@ static int azx_resume(struct device *dev)
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL
&& hda->need_i915_power) {
snd_hdac_display_power(azx_bus(chip), true);
haswell_set_bclk(hda);
snd_hdac_i915_set_bclk(azx_bus(chip));
}
if (chip->msi)
if (pci_enable_msi(pci) < 0)
@ -1058,7 +1014,7 @@ static int azx_runtime_resume(struct device *dev)
bus = azx_bus(chip);
if (hda->need_i915_power) {
snd_hdac_display_power(bus, true);
haswell_set_bclk(hda);
snd_hdac_i915_set_bclk(bus);
} else {
/* toggle codec wakeup bit for STATESTS read */
snd_hdac_set_codec_wakeup(bus, true);
@ -1796,12 +1752,8 @@ static int azx_first_init(struct azx *chip)
/* initialize chip */
azx_init_pci(chip);
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) {
struct hda_intel *hda;
hda = container_of(chip, struct hda_intel, chip);
haswell_set_bclk(hda);
}
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)
snd_hdac_i915_set_bclk(bus);
hda_intel_init_chip(chip, (probe_only[dev] & 2) == 0);

1
sound/pci/hda/patch_hdmi.c
View File

@ -2232,6 +2232,7 @@ static void intel_pin_eld_notify(void *audio_ptr, int port)
if (atomic_read(&(codec)->core.in_pm))
return;
snd_hdac_i915_set_bclk(&codec->bus->core);
check_presence_and_report(codec, pin_nid);
}

1
sound/pci/hda/patch_realtek.c
View File

@ -5584,6 +5584,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x17aa, 0x5034, "Thinkpad T450", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x5036, "Thinkpad T450s", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x503c, "Thinkpad L450", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x504a, "ThinkPad X260", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x504b, "Thinkpad", ALC293_FIXUP_LENOVO_SPK_NOISE),
SND_PCI_QUIRK(0x17aa, 0x5109, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K),

1
sound/soc/codecs/Kconfig
View File

@ -629,6 +629,7 @@ config SND_SOC_RT5514
config SND_SOC_RT5616
tristate "Realtek RT5616 CODEC"
depends on I2C
config SND_SOC_RT5631
tristate "Realtek ALC5631/RT5631 CODEC"

12
sound/soc/codecs/arizona.c
View File

@ -249,6 +249,18 @@ int arizona_init_spk(struct snd_soc_codec *codec)
}
EXPORT_SYMBOL_GPL(arizona_init_spk);
int arizona_free_spk(struct snd_soc_codec *codec)
{
struct arizona_priv *priv = snd_soc_codec_get_drvdata(codec);
struct arizona *arizona = priv->arizona;
arizona_free_irq(arizona, ARIZONA_IRQ_SPK_OVERHEAT_WARN, arizona);
arizona_free_irq(arizona, ARIZONA_IRQ_SPK_OVERHEAT, arizona);
return 0;
}
EXPORT_SYMBOL_GPL(arizona_free_spk);
static const struct snd_soc_dapm_route arizona_mono_routes[] = {
{ "OUT1R", NULL, "OUT1L" },
{ "OUT2R", NULL, "OUT2L" },

2
sound/soc/codecs/arizona.h
View File

@ -307,6 +307,8 @@ extern int arizona_init_spk(struct snd_soc_codec *codec);
extern int arizona_init_gpio(struct snd_soc_codec *codec);
extern int arizona_init_mono(struct snd_soc_codec *codec);
extern int arizona_free_spk(struct snd_soc_codec *codec);
extern int arizona_init_dai(struct arizona_priv *priv, int dai);
int arizona_set_output_mode(struct snd_soc_codec *codec, int output,

17
sound/soc/codecs/cs35l32.c
View File

@ -274,7 +274,9 @@ static int cs35l32_handle_of_data(struct i2c_client *i2c_client,
if (of_property_read_u32(np, "cirrus,sdout-share", &val) >= 0)
pdata->sdout_share = val;
of_property_read_u32(np, "cirrus,boost-manager", &val);
if (of_property_read_u32(np, "cirrus,boost-manager", &val))
val = -1u;
switch (val) {
case CS35L32_BOOST_MGR_AUTO:
case CS35L32_BOOST_MGR_AUTO_AUDIO:
@ -282,13 +284,15 @@ static int cs35l32_handle_of_data(struct i2c_client *i2c_client,
case CS35L32_BOOST_MGR_FIXED:
pdata->boost_mng = val;
break;
case -1u:
default:
dev_err(&i2c_client->dev,
"Wrong cirrus,boost-manager DT value %d\n", val);
pdata->boost_mng = CS35L32_BOOST_MGR_BYPASS;
}
of_property_read_u32(np, "cirrus,sdout-datacfg", &val);
if (of_property_read_u32(np, "cirrus,sdout-datacfg", &val))
val = -1u;
switch (val) {
case CS35L32_DATA_CFG_LR_VP:
case CS35L32_DATA_CFG_LR_STAT:
@ -296,13 +300,15 @@ static int cs35l32_handle_of_data(struct i2c_client *i2c_client,
case CS35L32_DATA_CFG_LR_VPSTAT:
pdata->sdout_datacfg = val;
break;
case -1u:
default:
dev_err(&i2c_client->dev,
"Wrong cirrus,sdout-datacfg DT value %d\n", val);
pdata->sdout_datacfg = CS35L32_DATA_CFG_LR;
}
of_property_read_u32(np, "cirrus,battery-threshold", &val);
if (of_property_read_u32(np, "cirrus,battery-threshold", &val))
val = -1u;
switch (val) {
case CS35L32_BATT_THRESH_3_1V:
case CS35L32_BATT_THRESH_3_2V:
@ -310,13 +316,15 @@ static int cs35l32_handle_of_data(struct i2c_client *i2c_client,
case CS35L32_BATT_THRESH_3_4V:
pdata->batt_thresh = val;
break;
case -1u:
default:
dev_err(&i2c_client->dev,
"Wrong cirrus,battery-threshold DT value %d\n", val);
pdata->batt_thresh = CS35L32_BATT_THRESH_3_3V;
}
of_property_read_u32(np, "cirrus,battery-recovery", &val);
if (of_property_read_u32(np, "cirrus,battery-recovery", &val))
val = -1u;
switch (val) {
case CS35L32_BATT_RECOV_3_1V:
case CS35L32_BATT_RECOV_3_2V:
@ -326,6 +334,7 @@ static int cs35l32_handle_of_data(struct i2c_client *i2c_client,
case CS35L32_BATT_RECOV_3_6V:
pdata->batt_recov = val;
break;
case -1u:
default:
dev_err(&i2c_client->dev,
"Wrong cirrus,battery-recovery DT value %d\n", val);

3
sound/soc/codecs/cs47l24.c
View File

@ -1108,6 +1108,9 @@ static int cs47l24_codec_remove(struct snd_soc_codec *codec)
priv->core.arizona->dapm = NULL;
arizona_free_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, priv);
arizona_free_spk(codec);
return 0;
}

94
sound/soc/codecs/hdac_hdmi.c
View File

@ -1420,33 +1420,40 @@ static int hdmi_codec_remove(struct snd_soc_codec *codec)
}
#ifdef CONFIG_PM
static int hdmi_codec_resume(struct snd_soc_codec *codec)
static int hdmi_codec_prepare(struct device *dev)
{
struct hdac_ext_device *edev = snd_soc_codec_get_drvdata(codec);
struct hdac_ext_device *edev = to_hda_ext_device(dev);
struct hdac_device *hdac = &edev->hdac;
pm_runtime_get_sync(&edev->hdac.dev);
/*
* Power down afg.
* codec_read is preferred over codec_write to set the power state.
* This way verb is send to set the power state and response
* is received. So setting power state is ensured without using loop
* to read the state.
*/
snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE,
AC_PWRST_D3);
return 0;
}
static void hdmi_codec_complete(struct device *dev)
{
struct hdac_ext_device *edev = to_hda_ext_device(dev);
struct hdac_hdmi_priv *hdmi = edev->private_data;
struct hdac_hdmi_pin *pin;
struct hdac_device *hdac = &edev->hdac;
struct hdac_bus *bus = hdac->bus;
int err;
unsigned long timeout;
/* Power up afg */
snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE,
AC_PWRST_D0);
hdac_hdmi_skl_enable_all_pins(&edev->hdac);
hdac_hdmi_skl_enable_dp12(&edev->hdac);
/* Power up afg */
if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0)) {
snd_hdac_codec_write(hdac, hdac->afg, 0,
AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
/* Wait till power state is set to D0 */
timeout = jiffies + msecs_to_jiffies(1000);
while (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0)
&& time_before(jiffies, timeout)) {
msleep(50);
}
}
/*
* As the ELD notify callback request is not entertained while the
* device is in suspend state. Need to manually check detection of
@ -1455,28 +1462,16 @@ static int hdmi_codec_resume(struct snd_soc_codec *codec)
list_for_each_entry(pin, &hdmi->pin_list, head)
hdac_hdmi_present_sense(pin, 1);
/*
* Codec power is turned ON during controller resume.
* Turn it OFF here
*/
err = snd_hdac_display_power(bus, false);
if (err < 0) {
dev_err(bus->dev,
"Cannot turn OFF display power on i915, err: %d\n",
err);
return err;
}
return 0;
pm_runtime_put_sync(&edev->hdac.dev);
}
#else
#define hdmi_codec_resume NULL
#define hdmi_codec_prepare NULL
#define hdmi_codec_complete NULL
#endif
static struct snd_soc_codec_driver hdmi_hda_codec = {
.probe = hdmi_codec_probe,
.remove = hdmi_codec_remove,
.resume = hdmi_codec_resume,
.idle_bias_off = true,
};
@ -1561,7 +1556,6 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
struct hdac_ext_device *edev = to_hda_ext_device(dev);
struct hdac_device *hdac = &edev->hdac;
struct hdac_bus *bus = hdac->bus;
unsigned long timeout;
int err;
dev_dbg(dev, "Enter: %s\n", __func__);
@ -1570,20 +1564,15 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
if (!bus)
return 0;
/* Power down afg */
if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3)) {
snd_hdac_codec_write(hdac, hdac->afg, 0,
AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
/* Wait till power state is set to D3 */
timeout = jiffies + msecs_to_jiffies(1000);
while (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3)
&& time_before(jiffies, timeout)) {
msleep(50);
}
}
/*
* Power down afg.
* codec_read is preferred over codec_write to set the power state.
* This way verb is send to set the power state and response
* is received. So setting power state is ensured without using loop
* to read the state.
*/
snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE,
AC_PWRST_D3);
err = snd_hdac_display_power(bus, false);
if (err < 0) {
dev_err(bus->dev, "Cannot turn on display power on i915\n");
@ -1616,9 +1605,8 @@ static int hdac_hdmi_runtime_resume(struct device *dev)
hdac_hdmi_skl_enable_dp12(&edev->hdac);
/* Power up afg */
if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0))
snd_hdac_codec_write(hdac, hdac->afg, 0,
AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE,
AC_PWRST_D0);
return 0;
}
@ -1629,6 +1617,8 @@ static int hdac_hdmi_runtime_resume(struct device *dev)
static const struct dev_pm_ops hdac_hdmi_pm = {
SET_RUNTIME_PM_OPS(hdac_hdmi_runtime_suspend, hdac_hdmi_runtime_resume, NULL)
.prepare = hdmi_codec_prepare,
.complete = hdmi_codec_complete,
};
static const struct hda_device_id hdmi_list[] = {

126
sound/soc/codecs/nau8825.c
View File

@ -343,9 +343,12 @@ static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = {
SND_SOC_DAPM_SUPPLY("ADC Power", NAU8825_REG_ANALOG_ADC_2, 6, 0, NULL,
0),
/* ADC for button press detection */
SND_SOC_DAPM_ADC("SAR", NULL, NAU8825_REG_SAR_CTRL,
NAU8825_SAR_ADC_EN_SFT, 0),
/* ADC for button press detection. A dapm supply widget is used to
* prevent dapm_power_widgets keeping the codec at SND_SOC_BIAS_ON
* during suspend.
*/
SND_SOC_DAPM_SUPPLY("SAR", NAU8825_REG_SAR_CTRL,
NAU8825_SAR_ADC_EN_SFT, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("ADACL", 2, NAU8825_REG_RDAC, 12, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("ADACR", 2, NAU8825_REG_RDAC, 13, 0, NULL, 0),
@ -607,6 +610,16 @@ static bool nau8825_is_jack_inserted(struct regmap *regmap)
static void nau8825_restart_jack_detection(struct regmap *regmap)
{
/* Chip needs one FSCLK cycle in order to generate interrupts,
* as we cannot guarantee one will be provided by the system. Turning
* master mode on then off enables us to generate that FSCLK cycle
* with a minimum of contention on the clock bus.
*/
regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER);
regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE);
/* this will restart the entire jack detection process including MIC/GND
* switching and create interrupts. We have to go from 0 to 1 and back
* to 0 to restart.
@ -728,7 +741,10 @@ static irqreturn_t nau8825_interrupt(int irq, void *data)
struct regmap *regmap = nau8825->regmap;
int active_irq, clear_irq = 0, event = 0, event_mask = 0;
regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq);
if (regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq)) {
dev_err(nau8825->dev, "failed to read irq status\n");
return IRQ_NONE;
}
if ((active_irq & NAU8825_JACK_EJECTION_IRQ_MASK) ==
NAU8825_JACK_EJECTION_DETECTED) {
@ -1141,33 +1157,74 @@ static int nau8825_set_bias_level(struct snd_soc_codec *codec,
return ret;
}
}
ret = regcache_sync(nau8825->regmap);
if (ret) {
dev_err(codec->dev,
"Failed to sync cache: %d\n", ret);
return ret;
}
}
break;
case SND_SOC_BIAS_OFF:
if (nau8825->mclk_freq)
clk_disable_unprepare(nau8825->mclk);
regcache_mark_dirty(nau8825->regmap);
break;
}
return 0;
}
#ifdef CONFIG_PM
static int nau8825_suspend(struct snd_soc_codec *codec)
{
struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec);
disable_irq(nau8825->irq);
regcache_cache_only(nau8825->regmap, true);
regcache_mark_dirty(nau8825->regmap);
return 0;
}
static int nau8825_resume(struct snd_soc_codec *codec)
{
struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec);
/* The chip may lose power and reset in S3. regcache_sync restores
* register values including configurations for sysclk, irq, and
* jack/button detection.
*/
regcache_cache_only(nau8825->regmap, false);
regcache_sync(nau8825->regmap);
/* Check the jack plug status directly. If the headset is unplugged
* during S3 when the chip has no power, there will be no jack
* detection irq even after the nau8825_restart_jack_detection below,
* because the chip just thinks no headset has ever been plugged in.
*/
if (!nau8825_is_jack_inserted(nau8825->regmap)) {
nau8825_eject_jack(nau8825);
snd_soc_jack_report(nau8825->jack, 0, SND_JACK_HEADSET);
}
enable_irq(nau8825->irq);
/* Run jack detection to check the type (OMTP or CTIA) of the headset
* if there is one. This handles the case where a different type of
* headset is plugged in during S3. This triggers an IRQ iff a headset
* is already plugged in.
*/
nau8825_restart_jack_detection(nau8825->regmap);
return 0;
}
#else
#define nau8825_suspend NULL
#define nau8825_resume NULL
#endif
static struct snd_soc_codec_driver nau8825_codec_driver = {
.probe = nau8825_codec_probe,
.set_sysclk = nau8825_set_sysclk,
.set_pll = nau8825_set_pll,
.set_bias_level = nau8825_set_bias_level,
.suspend_bias_off = true,
.suspend = nau8825_suspend,
.resume = nau8825_resume,
.controls = nau8825_controls,
.num_controls = ARRAY_SIZE(nau8825_controls),
@ -1277,16 +1334,6 @@ static int nau8825_setup_irq(struct nau8825 *nau8825)
regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL,
NAU8825_ENABLE_DACR, NAU8825_ENABLE_DACR);
/* Chip needs one FSCLK cycle in order to generate interrupts,
* as we cannot guarantee one will be provided by the system. Turning
* master mode on then off enables us to generate that FSCLK cycle
* with a minimum of contention on the clock bus.
*/
regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER);
regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE);
ret = devm_request_threaded_irq(nau8825->dev, nau8825->irq, NULL,
nau8825_interrupt, IRQF_TRIGGER_LOW | IRQF_ONESHOT,
"nau8825", nau8825);
@ -1354,36 +1401,6 @@ static int nau8825_i2c_remove(struct i2c_client *client)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int nau8825_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct nau8825 *nau8825 = dev_get_drvdata(dev);
disable_irq(client->irq);
regcache_cache_only(nau8825->regmap, true);
regcache_mark_dirty(nau8825->regmap);
return 0;
}
static int nau8825_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct nau8825 *nau8825 = dev_get_drvdata(dev);
regcache_cache_only(nau8825->regmap, false);
regcache_sync(nau8825->regmap);
enable_irq(client->irq);
return 0;
}
#endif
static const struct dev_pm_ops nau8825_pm = {
SET_SYSTEM_SLEEP_PM_OPS(nau8825_suspend, nau8825_resume)
};
static const struct i2c_device_id nau8825_i2c_ids[] = {
{ "nau8825", 0 },
{ }
@ -1410,7 +1427,6 @@ static struct i2c_driver nau8825_driver = {
.name = "nau8825",
.of_match_table = of_match_ptr(nau8825_of_ids),
.acpi_match_table = ACPI_PTR(nau8825_acpi_match),
.pm = &nau8825_pm,
},
.probe = nau8825_i2c_probe,
.remove = nau8825_i2c_remove,

2
sound/soc/codecs/rt5640.c
View File

@ -359,7 +359,7 @@ static const DECLARE_TLV_DB_RANGE(bst_tlv,
/* Interface data select */
static const char * const rt5640_data_select[] = {
"Normal", "left copy to right", "right copy to left", "Swap"};
"Normal", "Swap", "left copy to right", "right copy to left"};
static SOC_ENUM_SINGLE_DECL(rt5640_if1_dac_enum, RT5640_DIG_INF_DATA,
RT5640_IF1_DAC_SEL_SFT, rt5640_data_select);

36
sound/soc/codecs/rt5640.h
View File

@ -443,39 +443,39 @@
#define RT5640_IF1_DAC_SEL_MASK (0x3 << 14)
#define RT5640_IF1_DAC_SEL_SFT 14
#define RT5640_IF1_DAC_SEL_NOR (0x0 << 14)
#define RT5640_IF1_DAC_SEL_L2R (0x1 << 14)
#define RT5640_IF1_DAC_SEL_R2L (0x2 << 14)
#define RT5640_IF1_DAC_SEL_SWAP (0x3 << 14)
#define RT5640_IF1_DAC_SEL_SWAP (0x1 << 14)
#define RT5640_IF1_DAC_SEL_L2R (0x2 << 14)
#define RT5640_IF1_DAC_SEL_R2L (0x3 << 14)
#define RT5640_IF1_ADC_SEL_MASK (0x3 << 12)
#define RT5640_IF1_ADC_SEL_SFT 12
#define RT5640_IF1_ADC_SEL_NOR (0x0 << 12)
#define RT5640_IF1_ADC_SEL_L2R (0x1 << 12)
#define RT5640_IF1_ADC_SEL_R2L (0x2 << 12)
#define RT5640_IF1_ADC_SEL_SWAP (0x3 << 12)
#define RT5640_IF1_ADC_SEL_SWAP (0x1 << 12)
#define RT5640_IF1_ADC_SEL_L2R (0x2 << 12)
#define RT5640_IF1_ADC_SEL_R2L (0x3 << 12)
#define RT5640_IF2_DAC_SEL_MASK (0x3 << 10)
#define RT5640_IF2_DAC_SEL_SFT 10
#define RT5640_IF2_DAC_SEL_NOR (0x0 << 10)
#define RT5640_IF2_DAC_SEL_L2R (0x1 << 10)
#define RT5640_IF2_DAC_SEL_R2L (0x2 << 10)
#define RT5640_IF2_DAC_SEL_SWAP (0x3 << 10)
#define RT5640_IF2_DAC_SEL_SWAP (0x1 << 10)
#define RT5640_IF2_DAC_SEL_L2R (0x2 << 10)
#define RT5640_IF2_DAC_SEL_R2L (0x3 << 10)
#define RT5640_IF2_ADC_SEL_MASK (0x3 << 8)
#define RT5640_IF2_ADC_SEL_SFT 8
#define RT5640_IF2_ADC_SEL_NOR (0x0 << 8)
#define RT5640_IF2_ADC_SEL_L2R (0x1 << 8)
#define RT5640_IF2_ADC_SEL_R2L (0x2 << 8)
#define RT5640_IF2_ADC_SEL_SWAP (0x3 << 8)
#define RT5640_IF2_ADC_SEL_SWAP (0x1 << 8)
#define RT5640_IF2_ADC_SEL_L2R (0x2 << 8)
#define RT5640_IF2_ADC_SEL_R2L (0x3 << 8)
#define RT5640_IF3_DAC_SEL_MASK (0x3 << 6)
#define RT5640_IF3_DAC_SEL_SFT 6
#define RT5640_IF3_DAC_SEL_NOR (0x0 << 6)
#define RT5640_IF3_DAC_SEL_L2R (0x1 << 6)
#define RT5640_IF3_DAC_SEL_R2L (0x2 << 6)
#define RT5640_IF3_DAC_SEL_SWAP (0x3 << 6)
#define RT5640_IF3_DAC_SEL_SWAP (0x1 << 6)
#define RT5640_IF3_DAC_SEL_L2R (0x2 << 6)
#define RT5640_IF3_DAC_SEL_R2L (0x3 << 6)
#define RT5640_IF3_ADC_SEL_MASK (0x3 << 4)
#define RT5640_IF3_ADC_SEL_SFT 4
#define RT5640_IF3_ADC_SEL_NOR (0x0 << 4)
#define RT5640_IF3_ADC_SEL_L2R (0x1 << 4)
#define RT5640_IF3_ADC_SEL_R2L (0x2 << 4)
#define RT5640_IF3_ADC_SEL_SWAP (0x3 << 4)
#define RT5640_IF3_ADC_SEL_SWAP (0x1 << 4)
#define RT5640_IF3_ADC_SEL_L2R (0x2 << 4)
#define RT5640_IF3_ADC_SEL_R2L (0x3 << 4)
/* REC Left Mixer Control 1 (0x3b) */
#define RT5640_G_HP_L_RM_L_MASK (0x7 << 13)

5
sound/soc/codecs/wm5102.c
View File

@ -1955,11 +1955,16 @@ err_adsp2_codec_probe:
static int wm5102_codec_remove(struct snd_soc_codec *codec)
{
struct wm5102_priv *priv = snd_soc_codec_get_drvdata(codec);
struct arizona *arizona = priv->core.arizona;
wm_adsp2_codec_remove(&priv->core.adsp[0], codec);
priv->core.arizona->dapm = NULL;
arizona_free_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, priv);
arizona_free_spk(codec);
return 0;
}

2
sound/soc/codecs/wm5110.c
View File

@ -2298,6 +2298,8 @@ static int wm5110_codec_remove(struct snd_soc_codec *codec)
arizona_free_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, priv);
arizona_free_spk(codec);
return 0;
}

2
sound/soc/codecs/wm8962.c
View File

@ -2471,7 +2471,7 @@ static void wm8962_configure_bclk(struct snd_soc_codec *codec)
break;
default:
dev_warn(codec->dev, "Unknown DSPCLK divisor read back\n");
dspclk = wm8962->sysclk;
dspclk = wm8962->sysclk_rate;
}
dev_dbg(codec->dev, "DSPCLK is %dHz, BCLK %d\n", dspclk, wm8962->bclk);

2
sound/soc/codecs/wm8997.c
View File

@ -1072,6 +1072,8 @@ static int wm8997_codec_remove(struct snd_soc_codec *codec)
priv->core.arizona->dapm = NULL;
arizona_free_spk(codec);
return 0;
}

2
sound/soc/codecs/wm8998.c
View File

@ -1324,6 +1324,8 @@ static int wm8998_codec_remove(struct snd_soc_codec *codec)
priv->core.arizona->dapm = NULL;
arizona_free_spk(codec);
return 0;
}

1
sound/soc/intel/Kconfig
View File

@ -163,7 +163,6 @@ config SND_SOC_INTEL_SKYLAKE
tristate
select SND_HDA_EXT_CORE
select SND_SOC_TOPOLOGY
select SND_HDA_I915
select SND_SOC_INTEL_SST
config SND_SOC_INTEL_SKL_RT286_MACH

2
sound/soc/intel/haswell/sst-haswell-ipc.c
View File

@ -1345,7 +1345,7 @@ int sst_hsw_stream_reset(struct sst_hsw *hsw, struct sst_hsw_stream *stream)
return 0;
/* wait for pause to complete before we reset the stream */
while (stream->running && tries--)
while (stream->running && --tries)
msleep(1);
if (!tries) {
dev_err(hsw->dev, "error: reset stream %d still running\n",

5
sound/soc/intel/skylake/skl-sst-dsp.c
View File

@ -336,6 +336,11 @@ void skl_dsp_free(struct sst_dsp *dsp)
skl_ipc_int_disable(dsp);
free_irq(dsp->irq, dsp);
dsp->cl_dev.ops.cl_cleanup_controller(dsp);
skl_cldma_int_disable(dsp);
skl_ipc_op_int_disable(dsp);
skl_ipc_int_disable(dsp);
skl_dsp_disable_core(dsp);
}
EXPORT_SYMBOL_GPL(skl_dsp_free);

32
sound/soc/intel/skylake/skl-topology.c
View File

@ -239,6 +239,7 @@ static void skl_tplg_update_buffer_size(struct skl_sst *ctx,
{
int multiplier = 1;
struct skl_module_fmt *in_fmt, *out_fmt;
int in_rate, out_rate;
/* Since fixups is applied to pin 0 only, ibs, obs needs
@ -249,13 +250,22 @@ static void skl_tplg_update_buffer_size(struct skl_sst *ctx,
if (mcfg->m_type == SKL_MODULE_TYPE_SRCINT)
multiplier = 5;
mcfg->ibs = (in_fmt->s_freq / 1000) *
(mcfg->in_fmt->channels) *
if (in_fmt->s_freq % 1000)
in_rate = (in_fmt->s_freq / 1000) + 1;
else
in_rate = (in_fmt->s_freq / 1000);
mcfg->ibs = in_rate * (mcfg->in_fmt->channels) *
(mcfg->in_fmt->bit_depth >> 3) *
multiplier;
mcfg->obs = (mcfg->out_fmt->s_freq / 1000) *
(mcfg->out_fmt->channels) *
if (mcfg->out_fmt->s_freq % 1000)
out_rate = (mcfg->out_fmt->s_freq / 1000) + 1;
else
out_rate = (mcfg->out_fmt->s_freq / 1000);
mcfg->obs = out_rate * (mcfg->out_fmt->channels) *
(mcfg->out_fmt->bit_depth >> 3) *
multiplier;
}
@ -485,11 +495,15 @@ skl_tplg_init_pipe_modules(struct skl *skl, struct skl_pipe *pipe)
if (!skl_is_pipe_mcps_avail(skl, mconfig))
return -ENOMEM;
skl_tplg_alloc_pipe_mcps(skl, mconfig);
if (mconfig->is_loadable && ctx->dsp->fw_ops.load_mod) {
ret = ctx->dsp->fw_ops.load_mod(ctx->dsp,
mconfig->id.module_id, mconfig->guid);
if (ret < 0)
return ret;
mconfig->m_state = SKL_MODULE_LOADED;
}
/* update blob if blob is null for be with default value */
@ -509,7 +523,6 @@ skl_tplg_init_pipe_modules(struct skl *skl, struct skl_pipe *pipe)
ret = skl_tplg_set_module_params(w, ctx);
if (ret < 0)
return ret;
skl_tplg_alloc_pipe_mcps(skl, mconfig);
}
return 0;
@ -524,7 +537,8 @@ static int skl_tplg_unload_pipe_modules(struct skl_sst *ctx,
list_for_each_entry(w_module, &pipe->w_list, node) {
mconfig = w_module->w->priv;
if (mconfig->is_loadable && ctx->dsp->fw_ops.unload_mod)
if (mconfig->is_loadable && ctx->dsp->fw_ops.unload_mod &&
mconfig->m_state > SKL_MODULE_UNINIT)
return ctx->dsp->fw_ops.unload_mod(ctx->dsp,
mconfig->id.module_id);
}
@ -558,6 +572,9 @@ static int skl_tplg_mixer_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w,
if (!skl_is_pipe_mem_avail(skl, mconfig))
return -ENOMEM;
skl_tplg_alloc_pipe_mem(skl, mconfig);
skl_tplg_alloc_pipe_mcps(skl, mconfig);
/*
* Create a list of modules for pipe.
* This list contains modules from source to sink
@ -601,9 +618,6 @@ static int skl_tplg_mixer_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w,
src_module = dst_module;
}
skl_tplg_alloc_pipe_mem(skl, mconfig);
skl_tplg_alloc_pipe_mcps(skl, mconfig);
return 0;
}

8
sound/soc/intel/skylake/skl-topology.h
View File

@ -274,10 +274,10 @@ struct skl_pipe {
enum skl_module_state {
SKL_MODULE_UNINIT = 0,
SKL_MODULE_INIT_DONE = 1,
SKL_MODULE_LOADED = 2,
SKL_MODULE_UNLOADED = 3,
SKL_MODULE_BIND_DONE = 4
SKL_MODULE_LOADED = 1,
SKL_MODULE_INIT_DONE = 2,
SKL_MODULE_BIND_DONE = 3,
SKL_MODULE_UNLOADED = 4,
};
struct skl_module_cfg {

32
sound/soc/intel/skylake/skl.c
View File

@ -222,6 +222,7 @@ static int skl_suspend(struct device *dev)
struct hdac_ext_bus *ebus = pci_get_drvdata(pci);
struct skl *skl = ebus_to_skl(ebus);
struct hdac_bus *bus = ebus_to_hbus(ebus);
int ret = 0;
/*
* Do not suspend if streams which are marked ignore suspend are
@ -232,10 +233,20 @@ static int skl_suspend(struct device *dev)
enable_irq_wake(bus->irq);
pci_save_state(pci);
pci_disable_device(pci);
return 0;
} else {
return _skl_suspend(ebus);
ret = _skl_suspend(ebus);
if (ret < 0)
return ret;
}
if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) {
ret = snd_hdac_display_power(bus, false);
if (ret < 0)
dev_err(bus->dev,
"Cannot turn OFF display power on i915\n");
}
return ret;
}
static int skl_resume(struct device *dev)
@ -316,17 +327,20 @@ static int skl_free(struct hdac_ext_bus *ebus)
if (bus->irq >= 0)
free_irq(bus->irq, (void *)bus);
if (bus->remap_addr)
iounmap(bus->remap_addr);
snd_hdac_bus_free_stream_pages(bus);
snd_hdac_stream_free_all(ebus);
snd_hdac_link_free_all(ebus);
if (bus->remap_addr)
iounmap(bus->remap_addr);
pci_release_regions(skl->pci);
pci_disable_device(skl->pci);
snd_hdac_ext_bus_exit(ebus);
if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI))
snd_hdac_i915_exit(&ebus->bus);
return 0;
}
@ -719,12 +733,12 @@ static void skl_remove(struct pci_dev *pci)
if (skl->tplg)
release_firmware(skl->tplg);
if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI))
snd_hdac_i915_exit(&ebus->bus);
if (pci_dev_run_wake(pci))
pm_runtime_get_noresume(&pci->dev);
pci_dev_put(pci);
/* codec removal, invoke bus_device_remove */
snd_hdac_ext_bus_device_remove(ebus);
skl_platform_unregister(&pci->dev);
skl_free_dsp(skl);
skl_machine_device_unregister(skl);

7
sound/soc/soc-dapm.c
View File

@ -2188,6 +2188,13 @@ static ssize_t dapm_widget_show_component(struct snd_soc_component *cmpnt,
int count = 0;
char *state = "not set";
/* card won't be set for the dummy component, as a spot fix
* we're checking for that case specifically here but in future
* we will ensure that the dummy component looks like others.
*/
if (!cmpnt->card)
return 0;
list_for_each_entry(w, &cmpnt->card->widgets, list) {
if (w->dapm != dapm)
continue;