From e19217299caf1a54c55081ab6339b3baccec63b0 Mon Sep 17 00:00:00 2001 From: Mathieu Poirier Date: Wed, 17 Feb 2016 17:51:54 -0700 Subject: [PATCH] coresight: etm3x: changing default trace configuration Changing default configuration to include the entire address range rather than just the kernel. That way traces are more inclusive and it is easier to narrow down if needed. Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/coresight/coresight-etm.h | 2 ++ drivers/hwtracing/coresight/coresight-etm3x.c | 29 +++++++++---------- 2 files changed, 15 insertions(+), 16 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-etm.h b/drivers/hwtracing/coresight/coresight-etm.h index 5b29d5540fe5..44585d4adb26 100644 --- a/drivers/hwtracing/coresight/coresight-etm.h +++ b/drivers/hwtracing/coresight/coresight-etm.h @@ -146,6 +146,7 @@ * @startstop_ctrl: setting for register ETMTSSCR. * @enable_event: setting for register ETMTEEVR. * @enable_ctrl1: setting for register ETMTECR1. + * @enable_ctrl2: setting for register ETMTECR2. * @fifofull_level: setting for register ETMFFLR. * @addr_idx: index for the address comparator selection. * @addr_val: value for address comparator register. @@ -179,6 +180,7 @@ struct etm_config { u32 startstop_ctrl; u32 enable_event; u32 enable_ctrl1; + u32 enable_ctrl2; u32 fifofull_level; u8 addr_idx; u32 addr_val[ETM_MAX_ADDR_CMP]; diff --git a/drivers/hwtracing/coresight/coresight-etm3x.c b/drivers/hwtracing/coresight/coresight-etm3x.c index 447459969cb5..92139674bea4 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x.c +++ b/drivers/hwtracing/coresight/coresight-etm3x.c @@ -579,26 +579,23 @@ static void etm_init_arch_data(void *info) static void etm_init_default_data(struct etm_config *config) { - u32 flags = (1 << 0 | /* instruction execute*/ - 3 << 3 | /* ARM instruction */ - 0 << 5 | /* No data value comparison */ - 0 << 7 | /* No exact mach */ - 0 << 8 | /* Ignore context ID */ - 0 << 10); /* Security ignored */ - if (WARN_ON_ONCE(!config)) return; - config->ctrl = (ETMCR_CYC_ACC | ETMCR_TIMESTAMP_EN); - config->enable_ctrl1 = ETMTECR1_ADDR_COMP_1; - config->addr_val[0] = (u32) _stext; - config->addr_val[1] = (u32) _etext; - config->addr_acctype[0] = flags; - config->addr_acctype[1] = flags; - config->addr_type[0] = ETM_ADDR_TYPE_RANGE; - config->addr_type[1] = ETM_ADDR_TYPE_RANGE; - etm_set_default(config); + + /* + * Taken verbatim from the TRM: + * + * To trace all memory: + * set bit [24] in register 0x009, the ETMTECR1, to 1 + * set all other bits in register 0x009, the ETMTECR1, to 0 + * set all bits in register 0x007, the ETMTECR2, to 0 + * set register 0x008, the ETMTEEVR, to 0x6F (TRUE). + */ + config->enable_ctrl1 = BIT(24); + config->enable_ctrl2 = 0x0; + config->enable_event = ETM_HARD_WIRE_RES_A; } static void etm_init_trace_id(struct etm_drvdata *drvdata)