renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 07:04:00 +08:00
Code

serial: fsl_lpuart: Use common rs485 device tree parsing function

Browse Source 
We just got a common helper for parsing the rs485 specific
device tree properties. Use it and drop the open coded parser.

As a side effect this adds support for parsing rs485-rts-delay and
rs485-rx-during-tx. As the driver doesn't support this though, probing
fails if these are defined.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Sascha Hauer 2017-09-13 10:18:29 +02:00 committed by Greg Kroah-Hartman
parent 79d9e95a05
commit dde18d53d7
1 changed files with 18 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
drivers/tty/serial/fsl_lpuart.c
View File

@ -2222,6 +2222,24 @@ static int lpuart_probe(struct platform_device *pdev)
return ret;
}
of_get_rs485_mode(np, &sport->port.rs485);
if (sport->port.rs485.flags & SER_RS485_RX_DURING_TX) {
dev_err(&pdev->dev, "driver doesn't support RX during TX\n");
return -ENOSYS;
}
if (sport->port.rs485.delay_rts_before_send ||
sport->port.rs485.delay_rts_after_send) {
dev_err(&pdev->dev, "driver doesn't support RTS delays\n");
return -ENOSYS;
}
if (sport->port.rs485.flags & SER_RS485_ENABLED) {
sport->port.rs485.flags |= SER_RS485_RTS_ON_SEND;
writeb(UARTMODEM_TXRTSE, sport->port.membase + UARTMODEM);
}
sport->dma_tx_chan = dma_request_slave_channel(sport->port.dev, "tx");
if (!sport->dma_tx_chan)
dev_info(sport->port.dev, "DMA tx channel request failed, "
@ -2232,12 +2250,6 @@ static int lpuart_probe(struct platform_device *pdev)
dev_info(sport->port.dev, "DMA rx channel request failed, "
"operating without rx DMA\n");
if (of_property_read_bool(np, "linux,rs485-enabled-at-boot-time")) {
sport->port.rs485.flags |= SER_RS485_ENABLED;
sport->port.rs485.flags |= SER_RS485_RTS_ON_SEND;
writeb(UARTMODEM_TXRTSE, sport->port.membase + UARTMODEM);
}
return 0;
}