2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-14 16:23:51 +08:00

NFC: digital: Add Inititor-side PSL support

In order to operate at the fasted bit rate
possible, add initiator-side support for
PSL REQ while in P2P mode.  The PSL REQ
will switch the RF technology to 424F
whenever possible.

Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com>
Tested-by: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Mark A. Greer 2014-07-22 20:18:01 -07:00 committed by Samuel Ortiz
parent 6a5d088a92
commit dddb3da046

View File

@ -33,6 +33,8 @@
#define DIGITAL_ATR_REQ_MAX_SIZE 64
#define DIGITAL_LR_BITS_PAYLOAD_SIZE_254B 0x30
#define DIGITAL_FSL_BITS_PAYLOAD_SIZE_254B \
(DIGITAL_LR_BITS_PAYLOAD_SIZE_254B >> 4)
#define DIGITAL_GB_BIT 0x02
#define DIGITAL_NFC_DEP_PFB_TYPE(pfb) ((pfb) & 0xE0)
@ -127,6 +129,98 @@ static int digital_skb_pull_dep_sod(struct nfc_digital_dev *ddev,
return 0;
}
static void digital_in_recv_psl_res(struct nfc_digital_dev *ddev, void *arg,
struct sk_buff *resp)
{
struct nfc_target *target = arg;
struct digital_psl_res *psl_res;
int rc;
if (IS_ERR(resp)) {
rc = PTR_ERR(resp);
resp = NULL;
goto exit;
}
rc = ddev->skb_check_crc(resp);
if (rc) {
PROTOCOL_ERR("14.4.1.6");
goto exit;
}
rc = digital_skb_pull_dep_sod(ddev, resp);
if (rc) {
PROTOCOL_ERR("14.4.1.2");
goto exit;
}
psl_res = (struct digital_psl_res *)resp->data;
if ((resp->len != sizeof(*psl_res)) ||
(psl_res->dir != DIGITAL_NFC_DEP_FRAME_DIR_IN) ||
(psl_res->cmd != DIGITAL_CMD_PSL_RES)) {
rc = -EIO;
goto exit;
}
rc = digital_in_configure_hw(ddev, NFC_DIGITAL_CONFIG_RF_TECH,
NFC_DIGITAL_RF_TECH_424F);
if (rc)
goto exit;
rc = digital_in_configure_hw(ddev, NFC_DIGITAL_CONFIG_FRAMING,
NFC_DIGITAL_FRAMING_NFCF_NFC_DEP);
if (rc)
goto exit;
if (!DIGITAL_DRV_CAPS_IN_CRC(ddev) &&
(ddev->curr_rf_tech == NFC_DIGITAL_RF_TECH_106A)) {
ddev->skb_add_crc = digital_skb_add_crc_f;
ddev->skb_check_crc = digital_skb_check_crc_f;
}
ddev->curr_rf_tech = NFC_DIGITAL_RF_TECH_424F;
nfc_dep_link_is_up(ddev->nfc_dev, target->idx, NFC_COMM_ACTIVE,
NFC_RF_INITIATOR);
ddev->curr_nfc_dep_pni = 0;
exit:
dev_kfree_skb(resp);
if (rc)
ddev->curr_protocol = 0;
}
static int digital_in_send_psl_req(struct nfc_digital_dev *ddev,
struct nfc_target *target)
{
struct sk_buff *skb;
struct digital_psl_req *psl_req;
skb = digital_skb_alloc(ddev, sizeof(*psl_req));
if (!skb)
return -ENOMEM;
skb_put(skb, sizeof(*psl_req));
psl_req = (struct digital_psl_req *)skb->data;
psl_req->dir = DIGITAL_NFC_DEP_FRAME_DIR_OUT;
psl_req->cmd = DIGITAL_CMD_PSL_REQ;
psl_req->did = 0;
psl_req->brs = (0x2 << 3) | 0x2; /* 424F both directions */
psl_req->fsl = DIGITAL_FSL_BITS_PAYLOAD_SIZE_254B;
digital_skb_push_dep_sod(ddev, skb);
ddev->skb_add_crc(skb);
return digital_in_send_cmd(ddev, skb, 500, digital_in_recv_psl_res,
target);
}
static void digital_in_recv_atr_res(struct nfc_digital_dev *ddev, void *arg,
struct sk_buff *resp)
{
@ -166,6 +260,13 @@ static void digital_in_recv_atr_res(struct nfc_digital_dev *ddev, void *arg,
if (rc)
goto exit;
if ((ddev->protocols & NFC_PROTO_FELICA_MASK) &&
(ddev->curr_rf_tech != NFC_DIGITAL_RF_TECH_424F)) {
rc = digital_in_send_psl_req(ddev, target);
if (!rc)
goto exit;
}
rc = nfc_dep_link_is_up(ddev->nfc_dev, target->idx, NFC_COMM_ACTIVE,
NFC_RF_INITIATOR);