2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 05:04:00 +08:00

misc: remove redundant 'default n' from Kconfig-s

'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c5640c ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Bartlomiej Zolnierkiewicz 2019-05-20 16:10:46 +02:00 committed by Greg Kroah-Hartman
parent b728ddde76
commit dc3e0aa5c5
9 changed files with 0 additions and 22 deletions

View File

@ -8,7 +8,6 @@ config SENSORS_LIS3LV02D
tristate
depends on INPUT
select INPUT_POLLDEV
default n
config AD525X_DPOT
tristate "Analog Devices Digital Potentiometers"
@ -61,7 +60,6 @@ config ATMEL_TCLIB
config DUMMY_IRQ
tristate "Dummy IRQ handler"
default n
---help---
This module accepts a single 'irq' parameter, which it should register for.
The sole purpose of this module is to help with debugging of systems on
@ -117,7 +115,6 @@ config PHANTOM
config INTEL_MID_PTI
tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"
depends on PCI && TTY && (X86_INTEL_MID || COMPILE_TEST)
default n
help
The PTI (Parallel Trace Interface) driver directs
trace data routed from various parts in the system out
@ -193,7 +190,6 @@ config ATMEL_SSC
config ENCLOSURE_SERVICES
tristate "Enclosure Services"
default n
help
Provides support for intelligent enclosures (bays which
contain storage devices). You also need either a host
@ -217,7 +213,6 @@ config SGI_XP
config CS5535_MFGPT
tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
depends on MFD_CS5535
default n
help
This driver provides access to MFGPT functionality for other
drivers that need timers. MFGPTs are available in the CS5535 and
@ -250,7 +245,6 @@ config CS5535_CLOCK_EVENT_SRC
config HP_ILO
tristate "Channel interface driver for the HP iLO processor"
depends on PCI
default n
help
The channel interface driver allows applications to communicate
with iLO management processors present on HP ProLiant servers.
@ -285,7 +279,6 @@ config QCOM_FASTRPC
config SGI_GRU
tristate "SGI GRU driver"
depends on X86_UV && SMP
default n
select MMU_NOTIFIER
---help---
The GRU is a hardware resource located in the system chipset. The GRU
@ -300,7 +293,6 @@ config SGI_GRU
config SGI_GRU_DEBUG
bool "SGI GRU driver debug"
depends on SGI_GRU
default n
---help---
This option enables additional debugging code for the SGI GRU driver.
If you are unsure, say N.
@ -358,7 +350,6 @@ config SENSORS_BH1770
config SENSORS_APDS990X
tristate "APDS990X combined als and proximity sensors"
depends on I2C
default n
---help---
Say Y here if you want to build a driver for Avago APDS990x
combined ambient light and proximity sensor chip.
@ -386,7 +377,6 @@ config DS1682
config SPEAR13XX_PCIE_GADGET
bool "PCIe gadget support for SPEAr13XX platform"
depends on ARCH_SPEAR13XX && BROKEN
default n
help
This option enables gadget support for PCIe controller. If
board file defines any controller as PCIe endpoint then a sysfs

View File

@ -4,6 +4,5 @@ comment "Altera FPGA firmware download module (requires I2C)"
config ALTERA_STAPL
tristate "Altera FPGA firmware download module"
depends on I2C
default n
help
An Altera FPGA module. Say Y when you want to support this tool.

View File

@ -4,7 +4,6 @@
menuconfig C2PORT
tristate "Silicon Labs C2 port support"
default n
help
This option enables support for Silicon Labs C2 port used to
program Silicon micro controller chips (and other 8051 compatible).
@ -23,7 +22,6 @@ if C2PORT
config C2PORT_DURAMAR_2150
tristate "C2 port support for Eurotech's Duramar 2150"
depends on X86
default n
help
This option enables C2 support for the Eurotech's Duramar 2150
on board micro controller.

View File

@ -14,7 +14,6 @@ config CB710_CORE
config CB710_DEBUG
bool "Enable driver debugging"
depends on CB710_CORE != n
default n
help
This is an option for use by developers; most people should
say N here. This adds a lot of debugging output to dmesg.

View File

@ -4,16 +4,13 @@
config CXL_BASE
bool
default n
select PPC_COPRO_BASE
config CXL_AFU_DRIVER_OPS
bool
default n
config CXL_LIB
bool
default n
config CXL
tristate "Support for IBM Coherent Accelerators (CXL)"

View File

@ -1,6 +1,5 @@
config ECHO
tristate "Line Echo Canceller support"
default n
---help---
This driver provides line echo cancelling support for mISDN and
Zaptel drivers.

View File

@ -6,7 +6,6 @@ menuconfig GENWQE
tristate "GenWQE PCIe Accelerator"
depends on PCI && 64BIT
select CRC_ITU_T
default n
help
Enables PCIe card driver for IBM GenWQE accelerators.
The user-space interface is described in

View File

@ -6,7 +6,6 @@ config SENSORS_LIS3_SPI
tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
depends on !ACPI && SPI_MASTER && INPUT
select SENSORS_LIS3LV02D
default n
help
This driver provides support for the LIS3LV02Dx accelerometer connected
via SPI. The accelerometer data is readable via
@ -23,7 +22,6 @@ config SENSORS_LIS3_I2C
tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
depends on I2C && INPUT
select SENSORS_LIS3LV02D
default n
help
This driver provides support for the LIS3LV02Dx accelerometer connected
via I2C. The accelerometer data is readable via

View File

@ -4,7 +4,6 @@
config OCXL_BASE
bool
default n
select PPC_COPRO_BASE
config OCXL