Merge v5.14-rc3 into usb-next

We need the fixes in here, and this resolves a merge issue with drivers/usb/dwc3/gadget.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-20 03:04:01 +08:00 · 2021-07-26 11:16:46 +02:00 · 2021-07-26 11:16:46 +02:00 · d842bc6c05
commit d842bc6c05
parent 8e6cb5d27e ff1176468d
749 changed files with 10189 additions and 7312 deletions
--- a/Documentation/ABI/testing/sysfs-ptp
+++ b/Documentation/ABI/testing/sysfs-ptp
@ -33,6 +33,13 @@ Description:
 		frequency adjustment value (a positive integer) in
 		parts per billion.

+What:		/sys/class/ptp/ptpN/max_vclocks
+Date:		May 2021
+Contact:	Yangbo Lu <yangbo.lu@nxp.com>
+Description:
+		This file contains the maximum number of ptp vclocks.
+		Write integer to re-configure it.
+
 What:		/sys/class/ptp/ptpN/n_alarms
 Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
@ -61,6 +68,19 @@ Description:
 		This file contains the number of programmable pins
 		offered by the PTP hardware clock.

+What:		/sys/class/ptp/ptpN/n_vclocks
+Date:		May 2021
+Contact:	Yangbo Lu <yangbo.lu@nxp.com>
+Description:
+		This file contains the number of virtual PTP clocks in
+		use.  By default, the value is 0 meaning that only the
+		physical clock is in use.  Setting the value creates
+		the corresponding number of virtual clocks and causes
+		the physical clock to become free running.  Setting the
+		value back to 0 deletes the virtual clocks and
+		switches the physical clock back to normal, adjustable
+		operation.
+
 What:		/sys/class/ptp/ptpN/pins
 Date:		March 2014
 Contact:	Richard Cochran <richardcochran@gmail.com>
--- a/Documentation/arm64/tagged-address-abi.rst
+++ b/Documentation/arm64/tagged-address-abi.rst
@ -45,14 +45,24 @@ how the user addresses are used by the kernel:

 1. User addresses not accessed by the kernel but used for address space
   management (e.g. ``mprotect()``, ``madvise()``). The use of valid
-   tagged pointers in this context is allowed with the exception of
-   ``brk()``, ``mmap()`` and the ``new_address`` argument to
-   ``mremap()`` as these have the potential to alias with existing
-   user addresses.
+   tagged pointers in this context is allowed with these exceptions:

-   NOTE: This behaviour changed in v5.6 and so some earlier kernels may
-   incorrectly accept valid tagged pointers for the ``brk()``,
-   ``mmap()`` and ``mremap()`` system calls.
+   - ``brk()``, ``mmap()`` and the ``new_address`` argument to
+     ``mremap()`` as these have the potential to alias with existing
+      user addresses.
+
+     NOTE: This behaviour changed in v5.6 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for the ``brk()``,
+     ``mmap()`` and ``mremap()`` system calls.
+
+   - The ``range.start``, ``start`` and ``dst`` arguments to the
+     ``UFFDIO_*`` ``ioctl()``s used on a file descriptor obtained from
+     ``userfaultfd()``, as fault addresses subsequently obtained by reading
+     the file descriptor will be untagged, which may otherwise confuse
+     tag-unaware programs.
+
+     NOTE: This behaviour changed in v5.14 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for this system call.

 2. User addresses accessed by the kernel (e.g. ``write()``). This ABI
   relaxation is disabled by default and the application thread needs to
--- a/Documentation/dev-tools/kunit/running_tips.rst
+++ b/Documentation/dev-tools/kunit/running_tips.rst
@ -86,19 +86,7 @@ Generating code coverage reports under UML
 .. note::
 	TODO(brendanhiggins@google.com): There are various issues with UML and
 	versions of gcc 7 and up. You're likely to run into missing ``.gcda``
-	files or compile errors. We know one `faulty GCC commit
-	<https://github.com/gcc-mirror/gcc/commit/8c9434c2f9358b8b8bad2c1990edf10a21645f9d>`_
-	but not how we'd go about getting this fixed. The compile errors still
-	need some investigation.
-
-.. note::
-	TODO(brendanhiggins@google.com): for recent versions of Linux
-	(5.10-5.12, maybe earlier), there's a bug with gcov counters not being
-	flushed in UML. This translates to very low (<1%) reported coverage. This is
-	related to the above issue and can be worked around by replacing the
-	one call to ``uml_abort()`` (it's in ``os_dump_core()``) with a plain
-	``exit()``.
-
+	files or compile errors.

 This is different from the "normal" way of getting coverage information that is
 documented in Documentation/dev-tools/gcov.rst.
--- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml
@ -50,7 +50,6 @@ properties:

  reg:
    minItems: 1
-    maxItems: 3
    items:
      - description: base register
      - description: power register
--- a/Documentation/devicetree/bindings/display/renesas,du.yaml
+++ b/Documentation/devicetree/bindings/display/renesas,du.yaml
@ -92,7 +92,6 @@ required:
  - reg
  - clocks
  - interrupts
-  - resets
  - ports

 allOf:
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@ -39,17 +39,7 @@ properties:
  reg:
    maxItems: 1

-patternProperties:
-  "^adi,bypass-attenuator-in[0-4]$":
-    description: |
-      Configures bypassing the individual voltage input attenuator. If
-      set to 1 the attenuator is bypassed if set to 0 the attenuator is
-      not bypassed. If the property is absent then the attenuator
-      retains it's configuration from the bios/bootloader.
-    $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [0, 1]
-
-  "^adi,pwm-active-state$":
+  adi,pwm-active-state:
    description: |
      Integer array, represents the active state of the pwm outputs If set to 0
      the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
@ -61,6 +51,16 @@ patternProperties:
      enum: [0, 1]
      default: 1

+patternProperties:
+  "^adi,bypass-attenuator-in[0-4]$":
+    description: |
+      Configures bypassing the individual voltage input attenuator. If
+      set to 1 the attenuator is bypassed if set to 0 the attenuator is
+      not bypassed. If the property is absent then the attenuator
+      retains it's configuration from the bios/bootloader.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
 required:
  - compatible
  - reg
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@ -52,16 +52,14 @@ properties:
        items:
          - const: marvell,ap806-smmu-500
          - const: arm,mmu-500
-      - description: NVIDIA SoCs that program two ARM MMU-500s identically
-        items:
      - description: NVIDIA SoCs that require memory controller interaction
          and may program multiple ARM MMU-500s identically with the memory
          controller interleaving translations between multiple instances
          for improved performance.
        items:
          - enum:
-              - const: nvidia,tegra194-smmu
-              - const: nvidia,tegra186-smmu
+              - nvidia,tegra194-smmu
+              - nvidia,tegra186-smmu
          - const: nvidia,smmu-500
      - items:
          - const: arm,mmu-500
--- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
+++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
@ -28,14 +28,12 @@ properties:
      - description: configuration registers for MMU instance 0
      - description: configuration registers for MMU instance 1
    minItems: 1
-    maxItems: 2

  interrupts:
    items:
      - description: interruption for MMU instance 0
      - description: interruption for MMU instance 1
    minItems: 1
-    maxItems: 2

  clocks:
    items:
--- a/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml
@ -57,7 +57,6 @@ properties:

  ranges:
    minItems: 1
-    maxItems: 3
    description: |
      Memory bus areas for interacting with the devices. Reflects
      the memory layout with four integer values following:
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
@ -84,7 +84,6 @@ properties:

  interrupts:
    minItems: 1
-    maxItems: 3
    items:
      - description: NAND CTLRDY interrupt
      - description: FLASH_DMA_DONE if flash DMA is available
@ -92,7 +91,6 @@ properties:

  interrupt-names:
    minItems: 1
-    maxItems: 3
    items:
      - const: nand_ctlrdy
      - const: flash_dma_done
@ -148,8 +146,6 @@ allOf:
    then:
      properties:
        reg-names:
-          minItems: 2
-          maxItems: 2
          items:
            - const: nand
            - const: nand-int-base
@ -161,8 +157,6 @@ allOf:
    then:
      properties:
        reg-names:
-          minItems: 3
-          maxItems: 3
          items:
            - const: nand
            - const: nand-int-base
@ -175,8 +169,6 @@ allOf:
    then:
      properties:
        reg-names:
-          minItems: 3
-          maxItems: 3
          items:
            - const: nand
            - const: iproc-idm
--- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
@ -67,8 +67,8 @@ properties:
          reg:
            oneOf:
              - enum:
-                - 0
-                - 1
+                  - 0
+                  - 1

        required:
          - compatible
--- a/Documentation/devicetree/bindings/net/gpmc-eth.txt
+++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt
@ -13,7 +13,7 @@ Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt

 For the properties relevant to the ethernet controller connected to the GPMC
 refer to the binding documentation of the device. For example, the documentation
-for the SMSC 911x is Documentation/devicetree/bindings/net/smsc911x.txt
+for the SMSC 911x is Documentation/devicetree/bindings/net/smsc,lan9115.yaml

 Child nodes need to specify the GPMC bus address width using the "bank-width"
 property but is possible that an ethernet controller also has a property to
--- a/Documentation/devicetree/bindings/net/imx-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/imx-dwmac.txt
@ -1,56 +0,0 @@
-IMX8 glue layer controller, NXP imx8 families support Synopsys MAC 5.10a IP.
-
-This file documents platform glue layer for IMX.
-Please see stmmac.txt for the other unchanged properties.
-
-The device node has following properties.
-
-Required properties:
- compatible:  Should be "nxp,imx8mp-dwmac-eqos" to select glue layer
-	       and "snps,dwmac-5.10a" to select IP version.
- clocks: Must contain a phandle for each entry in clock-names.
- clock-names: Should be "stmmaceth" for the host clock.
-	       Should be "pclk" for the MAC apb clock.
-	       Should be "ptp_ref" for the MAC timer clock.
-	       Should be "tx" for the MAC RGMII TX clock:
-	       Should be "mem" for EQOS MEM clock.
-		- "mem" clock is required for imx8dxl platform.
-		- "mem" clock is not required for imx8mp platform.
- interrupt-names: Should contain a list of interrupt names corresponding to
-		   the interrupts in the interrupts property, if available.
-		   Should be "macirq" for the main MAC IRQ
-		   Should be "eth_wake_irq" for the IT which wake up system
- intf_mode: Should be phandle/offset pair. The phandle to the syscon node which
-	     encompases the GPR register, and the offset of the GPR register.
-		- required for imx8mp platform.
-		- is optional for imx8dxl platform.
-
-Optional properties:
- intf_mode: is optional for imx8dxl platform.
- snps,rmii_refclk_ext: to select RMII reference clock from external.
-
-Example:
-	eqos: ethernet@30bf0000 {
-		compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a";
-		reg = <0x30bf0000 0x10000>;
-		interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "eth_wake_irq", "macirq";
-		clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
-			 <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
-			 <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
-			 <&clk IMX8MP_CLK_ENET_QOS>;
-		clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
-		assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
-				  <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
-				  <&clk IMX8MP_CLK_ENET_QOS>;
-		assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
-					 <&clk IMX8MP_SYS_PLL2_100M>,
-					 <&clk IMX8MP_SYS_PLL2_125M>;
-		assigned-clock-rates = <0>, <100000000>, <125000000>;
-		nvmem-cells = <&eth_mac0>;
-		nvmem-cell-names = "mac-address";
-		nvmem_macaddr_swap;
-		intf_mode = <&gpr 0x4>;
-		status = "disabled";
-	};
--- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nxp,dwmac-imx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8 DWMAC glue layer Device Tree Bindings
+
+maintainers:
+  - Joakim Zhang <qiangqing.zhang@nxp.com>
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - nxp,imx8mp-dwmac-eqos
+          - nxp,imx8dxl-dwmac-eqos
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nxp,imx8mp-dwmac-eqos
+              - nxp,imx8dxl-dwmac-eqos
+          - const: snps,dwmac-5.10a
+
+  clocks:
+    minItems: 3
+    maxItems: 5
+    items:
+      - description: MAC host clock
+      - description: MAC apb clock
+      - description: MAC timer clock
+      - description: MAC RGMII TX clock
+      - description: EQOS MEM clock
+
+  clock-names:
+    minItems: 3
+    maxItems: 5
+    contains:
+      enum:
+        - stmmaceth
+        - pclk
+        - ptp_ref
+        - tx
+        - mem
+
+  intf_mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should be phandle/offset pair. The phandle to the syscon node which
+      encompases the GPR register, and the offset of the GPR register.
+
+  snps,rmii_refclk_ext:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      To select RMII reference clock from external.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    eqos: ethernet@30bf0000 {
+            compatible = "nxp,imx8mp-dwmac-eqos","snps,dwmac-5.10a";
+            reg = <0x30bf0000 0x10000>;
+            interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "macirq", "eth_wake_irq";
+            clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
+                     <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
+                     <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+                     <&clk IMX8MP_CLK_ENET_QOS>;
+            clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
+            phy-mode = "rgmii";
+            status = "disabled";
+    };
--- a/Documentation/devicetree/bindings/net/smsc,lan9115.yaml
+++ b/Documentation/devicetree/bindings/net/smsc,lan9115.yaml
@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/smsc,lan9115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: smsc,lan9115
+      - items:
+          - enum:
+              - smsc,lan89218
+              - smsc,lan9117
+              - smsc,lan9118
+              - smsc,lan9220
+              - smsc,lan9221
+          - const: smsc,lan9115
+
+  reg:
+    maxItems: 1
+
+  reg-shift: true
+
+  reg-io-width:
+    enum: [ 2, 4 ]
+    default: 2
+
+  interrupts:
+    minItems: 1
+    items:
+      - description:
+          LAN interrupt line
+      - description:
+          Optional PME (power management event) interrupt that is able to wake
+          up the host system with a 50ms pulse on network activity
+
+  clocks:
+    maxItems: 1
+
+  phy-mode: true
+
+  smsc,irq-active-high:
+    type: boolean
+    description: Indicates the IRQ polarity is active-high
+
+  smsc,irq-push-pull:
+    type: boolean
+    description: Indicates the IRQ type is push-pull
+
+  smsc,force-internal-phy:
+    type: boolean
+    description: Forces SMSC LAN controller to use internal PHY
+
+  smsc,force-external-phy:
+    type: boolean
+    description: Forces SMSC LAN controller to use external PHY
+
+  smsc,save-mac-address:
+    type: boolean
+    description:
+      Indicates that MAC address needs to be saved before resetting the
+      controller
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      A GPIO line connected to the RESET (active low) signal of the device.
+      On many systems this is wired high so the device goes out of reset at
+      power-on, but if it is under program control, this optional GPIO can
+      wake up in response to it.
+
+  vdd33a-supply:
+    description: 3.3V analog power supply
+
+  vddvario-supply:
+    description: IO logic power supply
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+# There are lots of bus-specific properties ("qcom,*", "samsung,*", "fsl,*",
+# "gpmc,*", ...) to be found, that actually depend on the compatible value of
+# the parent node.
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    ethernet@f4000000 {
+            compatible = "smsc,lan9220", "smsc,lan9115";
+            reg = <0xf4000000 0x2000000>;
+            phy-mode = "mii";
+            interrupt-parent = <&gpio1>;
+            interrupts = <31>, <32>;
+            reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+            reg-io-width = <4>;
+            smsc,irq-push-pull;
+    };
--- a/Documentation/devicetree/bindings/net/smsc911x.txt
+++ b/Documentation/devicetree/bindings/net/smsc911x.txt
@ -1,43 +0,0 @@
-* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
-
-Required properties:
- compatible : Should be "smsc,lan<model>", "smsc,lan9115"
- reg : Address and length of the io space for SMSC LAN
- interrupts : one or two interrupt specifiers
-  - The first interrupt is the SMSC LAN interrupt line
-  - The second interrupt (if present) is the PME (power
-    management event) interrupt that is able to wake up the host
-     system with a 50ms pulse on network activity
- phy-mode : See ethernet.txt file in the same directory
-
-Optional properties:
- reg-shift : Specify the quantity to shift the register offsets by
- reg-io-width : Specify the size (in bytes) of the IO accesses that
-  should be performed on the device.  Valid value for SMSC LAN is
-  2 or 4.  If it's omitted or invalid, the size would be 2.
- smsc,irq-active-high : Indicates the IRQ polarity is active-high
- smsc,irq-push-pull : Indicates the IRQ type is push-pull
- smsc,force-internal-phy : Forces SMSC LAN controller to use
-  internal PHY
- smsc,force-external-phy : Forces SMSC LAN controller to use
-  external PHY
- smsc,save-mac-address : Indicates that mac address needs to be saved
-  before resetting the controller
- reset-gpios : a GPIO line connected to the RESET (active low) signal
-  of the device. On many systems this is wired high so the device goes
-  out of reset at power-on, but if it is under program control, this
-  optional GPIO can wake up in response to it.
- vdd33a-supply, vddvario-supply : 3.3V analog and IO logic power supplies
-
-Examples:
-
-lan9220@f4000000 {
-	compatible = "smsc,lan9220", "smsc,lan9115";
-	reg = <0xf4000000 0x2000000>;
-	phy-mode = "mii";
-	interrupt-parent = <&gpio1>;
-	interrupts = <31>, <32>;
-	reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-	reg-io-width = <4>;
-	smsc,irq-push-pull;
-};
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@ -28,6 +28,7 @@ select:
          - snps,dwmac-4.00
          - snps,dwmac-4.10a
          - snps,dwmac-4.20a
+          - snps,dwmac-5.10a
          - snps,dwxgmac
          - snps,dwxgmac-2.10

@ -82,6 +83,7 @@ properties:
        - snps,dwmac-4.00
        - snps,dwmac-4.10a
        - snps,dwmac-4.20a
+        - snps,dwmac-5.10a
        - snps,dwxgmac
        - snps,dwxgmac-2.10

@ -375,6 +377,7 @@ allOf:
              - snps,dwmac-4.00
              - snps,dwmac-4.10a
              - snps,dwmac-4.20a
+              - snps,dwmac-5.10a
              - snps,dwxgmac
              - snps,dwxgmac-2.10
              - st,spear600-gmac
--- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@ -77,6 +77,34 @@ properties:
      Type-C spec states minimum CC pin debounce of 100 ms and maximum
      of 200 ms. However, some solutions might need more than 200 ms.

+  refclk-dig:
+    type: object
+    description: |
+      WIZ node should have subnode for refclk_dig to select the reference
+      clock source for the reference clock used in the PHY and PMA digital
+      logic.
+    properties:
+      clocks:
+        minItems: 2
+        maxItems: 4
+        description: Phandle to two (Torrent) or four (Sierra) clock nodes representing
+          the inputs to refclk_dig
+
+      "#clock-cells":
+        const: 0
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+    required:
+      - clocks
+      - "#clock-cells"
+      - assigned-clocks
+      - assigned-clock-parents
+
 patternProperties:
  "^pll[0|1]-refclk$":
    type: object
@ -121,34 +149,6 @@ patternProperties:
      - clocks
      - "#clock-cells"

-  "^refclk-dig$":
-    type: object
-    description: |
-      WIZ node should have subnode for refclk_dig to select the reference
-      clock source for the reference clock used in the PHY and PMA digital
-      logic.
-    properties:
-      clocks:
-        minItems: 2
-        maxItems: 4
-        description: Phandle to two (Torrent) or four (Sierra) clock nodes representing
-          the inputs to refclk_dig
-
-      "#clock-cells":
-        const: 0
-
-      assigned-clocks:
-        maxItems: 1
-
-      assigned-clock-parents:
-        maxItems: 1
-
-    required:
-      - clocks
-      - "#clock-cells"
-      - assigned-clocks
-      - assigned-clock-parents
-
  "^serdes@[0-9a-f]+$":
    type: object
    description: |
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@ -57,12 +57,14 @@ properties:
    maxItems: 1

  power-domains:
+    deprecated: true
    description:
      Power domain to use for enable control. This binding is only
      available if the compatible is chosen to regulator-fixed-domain.
    maxItems: 1

  required-opps:
+    deprecated: true
    description:
      Performance state to use for enable control. This binding is only
      available if the compatible is chosen to regulator-fixed-domain. The
--- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@ -36,12 +36,12 @@ properties:
          switching frequency must be one of following corresponding value
          1.1MHz, 1.65MHz, 2.2MHz, 2.75MHz

-    patternProperties:
-      "^ldo[1-4]$":
+      ldortc:
        type: object
        $ref: regulator.yaml#

-      "^ldortc$":
+    patternProperties:
+      "^ldo[1-4]$":
        type: object
        $ref: regulator.yaml#

--- a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
@ -83,7 +83,8 @@ properties:

        unevaluatedProperties: false

-      "^vsnvs$":
+    properties:
+      vsnvs:
        type: object
        $ref: regulator.yaml#
        description:
--- a/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml
+++ b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml
@ -30,7 +30,6 @@ properties:
    maxItems: 1

  clocks:
-    minItems: 2
    items:
      - description: PCLK clocks
      - description: EXTCLK clocks. Faraday calls it CLK1HZ and says the clock
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@ -114,7 +114,7 @@ properties:

  ports:
    $ref: /schemas/graph.yaml#/properties/ports
-    properties:
+    patternProperties:
      port(@[0-9a-f]+)?:
        $ref: audio-graph-port.yaml#
        unevaluatedProperties: false
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@ -79,22 +79,7 @@ properties:
    description:
      The SPI controller acts as a slave, instead of a master.

-allOf:
-  - if:
-      not:
-        required:
-          - spi-slave
-    then:
-      properties:
-        "#address-cells":
-          const: 1
-    else:
-      properties:
-        "#address-cells":
-          const: 0
-
-patternProperties:
-  "^slave$":
+  slave:
    type: object

    properties:
@ -105,6 +90,7 @@ patternProperties:
    required:
      - compatible

+patternProperties:
  "^.*@[0-9a-f]+$":
    type: object

@ -180,6 +166,20 @@ patternProperties:
      - compatible
      - reg

+allOf:
+  - if:
+      not:
+        required:
+          - spi-slave
+    then:
+      properties:
+        "#address-cells":
+          const: 1
+    else:
+      properties:
+        "#address-cells":
+          const: 0
+
 additionalProperties: true

 examples:
--- a/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml
+++ b/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml
@ -25,14 +25,12 @@ properties:

  interrupts:
    minItems: 1
-    maxItems: 2
    items:
      - description: Host controller interrupt
      - description: Device controller interrupt in isp1761

  interrupt-names:
    minItems: 1
-    maxItems: 2
    items:
      - const: host
      - const: peripheral
--- a/Documentation/driver-api/early-userspace/early_userspace_support.rst
+++ b/Documentation/driver-api/early-userspace/early_userspace_support.rst
@ -69,17 +69,17 @@ early userspace image can be built by an unprivileged user.

 As a technical note, when directories and files are specified, the
 entire CONFIG_INITRAMFS_SOURCE is passed to
-usr/gen_initramfs_list.sh.  This means that CONFIG_INITRAMFS_SOURCE
+usr/gen_initramfs.sh.  This means that CONFIG_INITRAMFS_SOURCE
 can really be interpreted as any legal argument to
-gen_initramfs_list.sh.  If a directory is specified as an argument then
+gen_initramfs.sh.  If a directory is specified as an argument then
 the contents are scanned, uid/gid translation is performed, and
 usr/gen_init_cpio file directives are output.  If a directory is
-specified as an argument to usr/gen_initramfs_list.sh then the
+specified as an argument to usr/gen_initramfs.sh then the
 contents of the file are simply copied to the output.  All of the output
 directives from directory scanning and file contents copying are
 processed by usr/gen_init_cpio.

-See also 'usr/gen_initramfs_list.sh -h'.
+See also 'usr/gen_initramfs.sh -h'.

 Where's this all leading?
 =========================
--- a/Documentation/features/core/thread-info-in-task/arch-support.txt
+++ b/Documentation/features/core/thread-info-in-task/arch-support.txt
@ -0,0 +1,32 @@
+#
+# Feature name:          thread-info-in-task
+#         Kconfig:       THREAD_INFO_IN_TASK
+#         description:   arch makes use of the core kernel facility to embedd thread_info in task_struct
+#
+    -----------------------
+    |         arch |status|
+    -----------------------
+    |       alpha: | TODO |
+    |         arc: | TODO |
+    |         arm: | TODO |
+    |       arm64: |  ok  |
+    |        csky: | TODO |
+    |       h8300: | TODO |
+    |     hexagon: | TODO |
+    |        ia64: | TODO |
+    |        m68k: | TODO |
+    |  microblaze: | TODO |
+    |        mips: | TODO |
+    |       nds32: |  ok  |
+    |       nios2: | TODO |
+    |    openrisc: | TODO |
+    |      parisc: | TODO |
+    |     powerpc: |  ok  |
+    |       riscv: |  ok  |
+    |        s390: |  ok  |
+    |          sh: | TODO |
+    |       sparc: | TODO |
+    |          um: | TODO |
+    |         x86: |  ok  |
+    |      xtensa: | TODO |
+    -----------------------
--- a/Documentation/features/time/arch-tick-broadcast/arch-support.txt
+++ b/Documentation/features/time/arch-tick-broadcast/arch-support.txt
@ -22,7 +22,7 @@
    |    openrisc: | TODO |
    |      parisc: | TODO |
    |     powerpc: |  ok  |
-    |       riscv: | TODO |
+    |       riscv: |  ok  |
    |        s390: | TODO |
    |          sh: |  ok  |
    |       sparc: | TODO |
--- a/Documentation/filesystems/ramfs-rootfs-initramfs.rst
+++ b/Documentation/filesystems/ramfs-rootfs-initramfs.rst
@ -170,7 +170,7 @@ Documentation/driver-api/early-userspace/early_userspace_support.rst for more de
 The kernel does not depend on external cpio tools.  If you specify a
 directory instead of a configuration file, the kernel's build infrastructure
 creates a configuration file from that directory (usr/Makefile calls
-usr/gen_initramfs_list.sh), and proceeds to package up that directory
+usr/gen_initramfs.sh), and proceeds to package up that directory
 using the config file (by feeding it to usr/gen_init_cpio, which is created
 from usr/gen_init_cpio.c).  The kernel's build-time cpio creation code is
 entirely self-contained, and the kernel's boot-time extractor is also
--- a/Documentation/networking/af_xdp.rst
+++ b/Documentation/networking/af_xdp.rst
@ -243,8 +243,8 @@ Configuration Flags and Socket Options
 These are the various configuration flags that can be used to control
 and monitor the behavior of AF_XDP sockets.

-XDP_COPY and XDP_ZERO_COPY bind flags
-------------------------------------
+XDP_COPY and XDP_ZEROCOPY bind flags
+------------------------------------

 When you bind to a socket, the kernel will first try to use zero-copy
 copy. If zero-copy is not supported, it will fall back on using copy
@ -252,7 +252,7 @@ mode, i.e. copying all packets out to user space. But if you would
 like to force a certain mode, you can use the following flags. If you
 pass the XDP_COPY flag to the bind call, the kernel will force the
 socket into copy mode. If it cannot use copy mode, the bind call will
-fail with an error. Conversely, the XDP_ZERO_COPY flag will force the
+fail with an error. Conversely, the XDP_ZEROCOPY flag will force the
 socket into zero-copy mode or fail.

 XDP_SHARED_UMEM bind flag
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@ -212,6 +212,7 @@ Userspace to kernel:
  ``ETHTOOL_MSG_FEC_SET``               set FEC settings
  ``ETHTOOL_MSG_MODULE_EEPROM_GET``     read SFP module EEPROM
  ``ETHTOOL_MSG_STATS_GET``             get standard statistics
+  ``ETHTOOL_MSG_PHC_VCLOCKS_GET``       get PHC virtual clocks info
  ===================================== ================================

 Kernel to userspace:
@ -250,6 +251,7 @@ Kernel to userspace:
  ``ETHTOOL_MSG_FEC_NTF``                  FEC settings
  ``ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY``  read SFP module EEPROM
  ``ETHTOOL_MSG_STATS_GET_REPLY``          standard statistics
+  ``ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY``    PHC virtual clocks info
  ======================================== =================================

 ``GET`` requests are sent by userspace applications to retrieve device
@ -1477,6 +1479,25 @@ Low and high bounds are inclusive, for example:
 etherStatsPkts512to1023Octets 512  1023
 ============================= ==== ====

+PHC_VCLOCKS_GET
+===============
+
+Query device PHC virtual clocks information.
+
+Request contents:
+
+  ====================================  ======  ==========================
+  ``ETHTOOL_A_PHC_VCLOCKS_HEADER``      nested  request header
+  ====================================  ======  ==========================
+
+Kernel response contents:
+
+  ====================================  ======  ==========================
+  ``ETHTOOL_A_PHC_VCLOCKS_HEADER``      nested  reply header
+  ``ETHTOOL_A_PHC_VCLOCKS_NUM``         u32     PHC virtual clocks number
+  ``ETHTOOL_A_PHC_VCLOCKS_INDEX``       s32     PHC index array
+  ====================================  ======  ==========================
+
 Request translation
 ===================

@ -1575,4 +1596,5 @@ are netlink only.
  n/a                                 ``ETHTOOL_MSG_CABLE_TEST_ACT``
  n/a                                 ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT``
  n/a                                 ``ETHTOOL_MSG_TUNNEL_INFO_GET``
+  n/a                                 ``ETHTOOL_MSG_PHC_VCLOCKS_GET``
  =================================== =====================================
--- a/Documentation/networking/ip-sysctl.rst
+++ b/Documentation/networking/ip-sysctl.rst
@ -826,7 +826,7 @@ tcp_fastopen_blackhole_timeout_sec - INTEGER
 	initial value when the blackhole issue goes away.
 	0 to disable the blackhole detection.

-	By default, it is set to 1hr.
+	By default, it is set to 0 (feature is disabled).

 tcp_fastopen_key - list of comma separated 32-digit hexadecimal INTEGERs
 	The list consists of a primary key and an optional backup key. The
--- a/Documentation/networking/nf_conntrack-sysctl.rst
+++ b/Documentation/networking/nf_conntrack-sysctl.rst
@ -110,6 +110,12 @@ nf_conntrack_tcp_be_liberal - BOOLEAN
 	Be conservative in what you do, be liberal in what you accept from others.
 	If it's non-zero, we mark only out of window RST segments as INVALID.

+nf_conntrack_tcp_ignore_invalid_rst - BOOLEAN
+	- 0 - disabled (default)
+	- 1 - enabled
+
+	If it's 1, we don't mark out of window RST segments as INVALID.
+
 nf_conntrack_tcp_loose - BOOLEAN
 	- 0 - disabled
 	- not 0 - enabled (default)
--- a/Documentation/networking/tipc.rst
+++ b/Documentation/networking/tipc.rst
@ -4,10 +4,125 @@
 Linux Kernel TIPC
 =================

-TIPC (Transparent Inter Process Communication) is a protocol that is
-specially designed for intra-cluster communication.
+Introduction
+============

-For more information about TIPC, see http://tipc.sourceforge.net.
+TIPC (Transparent Inter Process Communication) is a protocol that is specially
+designed for intra-cluster communication. It can be configured to transmit
+messages either on UDP or directly across Ethernet. Message delivery is
+sequence guaranteed, loss free and flow controlled. Latency times are shorter
+than with any other known protocol, while maximal throughput is comparable to
+that of TCP.
+
+TIPC Features
+-------------
+
+- Cluster wide IPC service
+
+  Have you ever wished you had the convenience of Unix Domain Sockets even when
+  transmitting data between cluster nodes? Where you yourself determine the
+  addresses you want to bind to and use? Where you don't have to perform DNS
+  lookups and worry about IP addresses? Where you don't have to start timers
+  to monitor the continuous existence of peer sockets? And yet without the
+  downsides of that socket type, such as the risk of lingering inodes?
+
+  Welcome to the Transparent Inter Process Communication service, TIPC in short,
+  which gives you all of this, and a lot more.
+
+- Service Addressing
+
+  A fundamental concept in TIPC is that of Service Addressing which makes it
+  possible for a programmer to chose his own address, bind it to a server
+  socket and let client programs use only that address for sending messages.
+
+- Service Tracking
+
+  A client wanting to wait for the availability of a server, uses the Service
+  Tracking mechanism to subscribe for binding and unbinding/close events for
+  sockets with the associated service address.
+
+  The service tracking mechanism can also be used for Cluster Topology Tracking,
+  i.e., subscribing for availability/non-availability of cluster nodes.
+
+  Likewise, the service tracking mechanism can be used for Cluster Connectivity
+  Tracking, i.e., subscribing for up/down events for individual links between
+  cluster nodes.
+
+- Transmission Modes
+
+  Using a service address, a client can send datagram messages to a server socket.
+
+  Using the same address type, it can establish a connection towards an accepting
+  server socket.
+
+  It can also use a service address to create and join a Communication Group,
+  which is the TIPC manifestation of a brokerless message bus.
+
+  Multicast with very good performance and scalability is available both in
+  datagram mode and in communication group mode.
+
+- Inter Node Links
+
+  Communication between any two nodes in a cluster is maintained by one or two
+  Inter Node Links, which both guarantee data traffic integrity and monitor
+  the peer node's availability.
+
+- Cluster Scalability
+
+  By applying the Overlapping Ring Monitoring algorithm on the inter node links
+  it is possible to scale TIPC clusters up to 1000 nodes with a maintained
+  neighbor failure discovery time of 1-2 seconds. For smaller clusters this
+  time can be made much shorter.
+
+- Neighbor Discovery
+
+  Neighbor Node Discovery in the cluster is done by Ethernet broadcast or UDP
+  multicast, when any of those services are available. If not, configured peer
+  IP addresses can be used.
+
+- Configuration
+
+  When running TIPC in single node mode no configuration whatsoever is needed.
+  When running in cluster mode TIPC must as a minimum be given a node address
+  (before Linux 4.17) and told which interface to attach to. The "tipc"
+  configuration tool makes is possible to add and maintain many more
+  configuration parameters.
+
+- Performance
+
+  TIPC message transfer latency times are better than in any other known protocol.
+  Maximal byte throughput for inter-node connections is still somewhat lower than
+  for TCP, while they are superior for intra-node and inter-container throughput
+  on the same host.
+
+- Language Support
+
+  The TIPC user API has support for C, Python, Perl, Ruby, D and Go.
+
+More Information
+----------------
+
+- How to set up TIPC:
+
+  http://tipc.io/getting_started.html
+
+- How to program with TIPC:
+
+  http://tipc.io/programming.html
+
+- How to contribute to TIPC:
+
+- http://tipc.io/contacts.html
+
+- More details about TIPC specification:
+
+  http://tipc.io/protocol.html
+
+
+Implementation
+==============
+
+TIPC is implemented as a kernel module in net/tipc/ directory.

 TIPC Base Types
 ---------------
--- a/Documentation/trace/histogram.rst
+++ b/Documentation/trace/histogram.rst
@ -191,7 +191,7 @@ Documentation written by Tom Zanussi
                                with the event, in nanoseconds.  May be
 			        modified by .usecs to have timestamps
 			        interpreted as microseconds.
-    cpu                    int  the cpu on which the event occurred.
+    common_cpu             int  the cpu on which the event occurred.
    ====================== ==== =======================================

 Extended error information
--- a/Documentation/translations/zh_CN/process/2.Process.rst
+++ b/Documentation/translations/zh_CN/process/2.Process.rst
@ -47,7 +47,7 @@
 （顺便说一句，值得注意的是，合并窗口期间集成的更改并不是凭空产生的；它们是经
 提前收集、测试和分级的。稍后将详细描述该过程的工作方式。）

-合并窗口持续大约两周。在这段时间结束时，LinusTorvalds将声明窗口已关闭，并
+合并窗口持续大约两周。在这段时间结束时，Linus Torvalds将声明窗口已关闭，并
 释放第一个“rc”内核。例如，对于目标为5.6的内核，在合并窗口结束时发生的释放
 将被称为5.6-rc1。-rc1 版本是一个信号，表示合并新特性的时间已经过去，稳定下一
 个内核的时间已经到来。
@ -168,7 +168,7 @@ Greg Kroah-Hartman领导。稳定团队将使用5.x.y编号方案不定期地发
 补丁如何进入内核
 ----------------

-只有一个人可以将补丁合并到主线内核存储库中：LinusTorvalds。但是，在进入
+只有一个人可以将补丁合并到主线内核存储库中：Linus Torvalds。但是，在进入
 2.6.38内核的9500多个补丁中，只有112个（大约1.3%）是由Linus自己直接选择的。
 内核项目已经发展到一个没有一个开发人员可以在没有支持的情况下检查和选择每个
 补丁的规模。内核开发人员处理这种增长的方式是使用围绕信任链构建的助理系统。
--- a/LICENSES/dual/CC-BY-4.0
+++ b/LICENSES/dual/CC-BY-4.0
@ -392,7 +392,7 @@ Section 8 -- Interpretation.
 Creative Commons is not a party to its public
 licenses. Notwithstanding, Creative Commons may elect to apply one of
 its public licenses to material it publishes and in those instances
-will be considered the “Licensor.” The text of the Creative Commons
+will be considered the "Licensor." The text of the Creative Commons
 public licenses is dedicated to the public domain under the CC0 Public
 Domain Dedication. Except for the limited purpose of indicating that
 material is shared under a Creative Commons public license or as
--- a/21
+++ b/21
@ -445,7 +445,7 @@ F:	drivers/platform/x86/wmi.c
 F:	include/uapi/linux/wmi.h

 ACRN HYPERVISOR SERVICE MODULE
-M:	Shuo Liu <shuo.a.liu@intel.com>
+M:	Fei Li <fei1.li@intel.com>
 L:	acrn-dev@lists.projectacrn.org (subscribers-only)
 S:	Supported
 W:	https://projectacrn.org
@ -933,6 +933,7 @@ F:	drivers/video/fbdev/geode/

 AMD IOMMU (AMD-VI)
 M:	Joerg Roedel <joro@8bytes.org>
+R:	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
 L:	iommu@lists.linux-foundation.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
@ -11757,6 +11758,7 @@ F:	drivers/char/hw_random/mtk-rng.c
 MEDIATEK SWITCH DRIVER
 M:	Sean Wang <sean.wang@mediatek.com>
 M:	Landen Chao <Landen.Chao@mediatek.com>
+M:	DENG Qingfang <dqfext@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/dsa/mt7530.*
@ -15009,6 +15011,13 @@ F:	drivers/net/phy/dp83640*
 F:	drivers/ptp/*
 F:	include/linux/ptp_cl*

+PTP VIRTUAL CLOCK SUPPORT
+M:	Yangbo Lu <yangbo.lu@nxp.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/ptp/ptp_vclock.c
+F:	net/ethtool/phc_vclocks.c
+
 PTRACE SUPPORT
 M:	Oleg Nesterov <oleg@redhat.com>
 S:	Maintained
@ -19114,7 +19123,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
-F:	drivers/phy/hisilicon/phy-kirin970-usb3.c
+F:	drivers/phy/hisilicon/phy-hi3670-usb3.c

 USB ISP116X DRIVER
 M:	Olav Kongas <ok@artecdesign.ee>
@ -19792,6 +19801,14 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/ptp/ptp_vmw.c

+VMWARE VMCI DRIVER
+M:	Jorgen Hansen <jhansen@vmware.com>
+M:	Vishnu Dasa <vdasa@vmware.com>
+L:	linux-kernel@vger.kernel.org
+L:	pv-drivers@vmware.com (private)
+S:	Maintained
+F:	drivers/misc/vmw_vmci/
+
 VMWARE VMMOUSE SUBDRIVER
 M:	"VMware Graphics" <linux-graphics-maintainer@vmware.com>
 M:	"VMware, Inc." <pv-drivers@vmware.com>
--- a/13
+++ b/13
@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Opossums on Parade

 # *DOCUMENTATION*
@ -728,11 +728,12 @@ $(KCONFIG_CONFIG):
 # This exploits the 'multi-target pattern rule' trick.
 # The syncconfig should be executed only once to make all the targets.
 # (Note: use the grouped target '&:' when we bump to GNU Make 4.3)
-quiet_cmd_syncconfig = SYNC    $@
-      cmd_syncconfig = $(MAKE) -f $(srctree)/Makefile syncconfig
-
+#
+# Do not use $(call cmd,...) here. That would suppress prompts from syncconfig,
+# so you cannot notice that Kconfig is waiting for the user input.
 %/config/auto.conf %/config/auto.conf.cmd %/generated/autoconf.h: $(KCONFIG_CONFIG)
-	+$(call cmd,syncconfig)
+	$(Q)$(kecho) "  SYNC    $@"
+	$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
 else # !may-sync-config
 # External modules and some install targets need include/generated/autoconf.h
 # and include/config/auto.conf but do not care if they are up-to-date.
@ -802,7 +803,7 @@ else
 # Warn about unmarked fall-throughs in switch statement.
 # Disabled for clang while comment to attribute conversion happens and
 # https://github.com/ClangBuiltLinux/linux/issues/636 is discussed.
-KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough,)
+KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough=5,)
 endif

 # These warnings generated too much noise in a regular build.
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@ -395,7 +395,7 @@ config ARCH_IXP4XX
 	select IXP4XX_IRQ
 	select IXP4XX_TIMER
 	# With the new PCI driver this is not needed
-	select NEED_MACH_IO_H if PCI_IXP4XX_LEGACY
+	select NEED_MACH_IO_H if IXP4XX_PCI_LEGACY
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	help
--- a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
@ -4,6 +4,7 @@
 #include "aspeed-g5.dtsi"
 #include <dt-bindings/gpio/aspeed-gpio.h>
 #include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>

 /{
 	model = "ASRock E3C246D4I BMC";
@ -73,7 +74,8 @@

 &vuart {
 	status = "okay";
-	aspeed,sirq-active-high;
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 };

 &mac0 {
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@ -406,15 +406,15 @@
 		reg = <0x69>;
 	};

-	power-supply@6a {
-		compatible = "ibm,cffps";
-		reg = <0x6a>;
-	};
-
 	power-supply@6b {
 		compatible = "ibm,cffps";
 		reg = <0x6b>;
 	};
+
+	power-supply@6d {
+		compatible = "ibm,cffps";
+		reg = <0x6d>;
+	};
 };

 &i2c4 {
@ -2832,6 +2832,7 @@

 &emmc {
 	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
 };

 &fsim0 {
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@ -280,10 +280,7 @@
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
+	/*Z0-Z7*/	"","","","","","","","";

 	pin_mclr_vpp {
 		gpio-hog;
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@ -136,10 +136,7 @@
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
+	/*Z0-Z7*/	"","","","","","","","";
 };

 &fmc {
@ -189,6 +186,7 @@

 &emmc {
 	status = "okay";
+	clk-phase-mmc-hs200 = <36>, <270>;
 };

 &fsim0 {
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@ -581,7 +581,7 @@
 			 * EBI2. This has a 25MHz chrystal next to it, so no
 			 * clocking is needed.
 			 */
-			ethernet-ebi2@2,0 {
+			ethernet@2,0 {
 				compatible = "smsc,lan9221", "smsc,lan9115";
 				reg = <2 0x0 0x100>;
 				/*
@ -598,8 +598,6 @@
 				phy-mode = "mii";
 				reg-io-width = <2>;
 				smsc,force-external-phy;
-				/* IRQ on edge falling = active low */
-				smsc,irq-active-low;
 				smsc,irq-push-pull;

 				/*
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@ -195,16 +195,15 @@
 		#size-cells = <1>;
 		ranges;

-		vic: intc@10140000 {
+		vic: interrupt-controller@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x10140000 0x1000>;
-			clear-mask = <0xffffffff>;
 			valid-mask = <0xffffffff>;
 		};

-		sic: intc@10003000 {
+		sic: interrupt-controller@10003000 {
 			compatible = "arm,versatile-sic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@ -7,7 +7,7 @@

 	amba {
 		/* The Versatile PB is using more SIC IRQ lines than the AB */
-		sic: intc@10003000 {
+		sic: interrupt-controller@10003000 {
 			clear-mask = <0xffffffff>;
 			/*
 			 * Valid interrupt lines mask according to
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@ -57,10 +57,7 @@ CONFIG_DRM=y
 CONFIG_DRM_DISPLAY_CONNECTOR=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_PL111=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_LOGO=y
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@ -821,7 +821,7 @@ CONFIG_USB_ISP1760=y
 CONFIG_USB_HSIC_USB3503=y
 CONFIG_AB8500_USB=y
 CONFIG_KEYSTONE_USB_PHY=m
-CONFIG_NOP_USB_XCEIV=m
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_AM335X_PHY_USB=m
 CONFIG_TWL6030_USB=m
 CONFIG_USB_GPIO_VBUS=y
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@ -64,11 +64,9 @@ CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_DISPLAY_CONNECTOR=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_PL111=y
-CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
 # CONFIG_SND_DRIVERS is not set
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@ -135,6 +135,7 @@ CONFIG_DRM_SII902X=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_I2C_ADV7511=y
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
+CONFIG_FB=y
 CONFIG_FB_SH_MOBILE_LCDC=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_AS3711=y
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@ -61,6 +61,10 @@ CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=y
 CONFIG_TOUCHSCREEN_BU21013=y
 CONFIG_TOUCHSCREEN_CY8CTMA140=y
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
+CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
+CONFIG_TOUCHSCREEN_MMS114=y
+CONFIG_TOUCHSCREEN_ZINITIX=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_AB8500_PONKEY=y
 CONFIG_INPUT_GPIO_VIBRA=y
@ -100,6 +104,7 @@ CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=y
 CONFIG_DRM_PANEL_SONY_ACX424AKP=y
 CONFIG_DRM_LIMA=y
 CONFIG_DRM_MCDE=y
+CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_KTD253=y
 CONFIG_BACKLIGHT_GPIO=y
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@ -60,7 +60,7 @@ CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_DISPLAY_CONNECTOR=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_PL111=y
-CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
@ -88,8 +88,6 @@ CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=m
-CONFIG_FONTS=y
-CONFIG_FONT_ACORN_8x8=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
--- a/arch/arm/configs/vexpress_defconfig
+++ b/arch/arm/configs/vexpress_defconfig
@ -11,9 +11,6 @@ CONFIG_CPUSETS=y
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_VEXPRESS_DCSCB=y
 CONFIG_ARCH_VEXPRESS_TC2_PM=y
@ -23,14 +20,17 @@ CONFIG_MCPM=y
 CONFIG_VMSPLIT_2G=y
 CONFIG_NR_CPUS=8
 CONFIG_ARM_PSCI=y
-CONFIG_CMA=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAMA0"
 CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@ -43,7 +43,6 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_NET_9P=y
 CONFIG_NET_9P_VIRTIO=y
 CONFIG_DEVTMPFS=y
-CONFIG_DMA_CMA=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@ -59,7 +58,6 @@ CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_VIRTIO=y
 CONFIG_ATA=y
-# CONFIG_SATA_PMP is not set
 CONFIG_NETDEVICES=y
 CONFIG_VIRTIO_NET=y
 CONFIG_SMC91X=y
@ -81,11 +79,9 @@ CONFIG_DRM=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_SII902X=y
 CONFIG_DRM_PL111=y
-CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
 # CONFIG_SND_DRIVERS is not set
@ -136,10 +132,11 @@ CONFIG_ROOT_NFS=y
 CONFIG_9P_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+# CONFIG_CRYPTO_HW is not set
+CONFIG_DMA_CMA=y
 CONFIG_DEBUG_INFO=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_CRYPTO_HW is not set
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@ -1605,7 +1605,8 @@ config ARM64_BTI_KERNEL
 	depends on CC_HAS_BRANCH_PROT_PAC_RET_BTI
 	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94697
 	depends on !CC_IS_GCC || GCC_VERSION >= 100100
-	depends on !(CC_IS_CLANG && GCOV_KERNEL)
+	# https://github.com/llvm/llvm-project/commit/a88c722e687e6780dcd6a58718350dc76fcc4cc9
+	depends on !CC_IS_CLANG || CLANG_VERSION >= 120000
 	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS)
 	help
 	  Build the kernel with Branch Target Identification annotations
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@ -821,9 +821,9 @@
 			eqos: ethernet@30bf0000 {
 				compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a";
 				reg = <0x30bf0000 0x10000>;
-				interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "eth_wake_irq", "macirq";
+				interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_wake_irq";
 				clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
 					 <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
 					 <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@ -948,6 +948,10 @@
 				 <&bpmp TEGRA194_CLK_XUSB_SS>,
 				 <&bpmp TEGRA194_CLK_XUSB_FS>;
 			clock-names = "dev", "ss", "ss_src", "fs_src";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_XUSB_DEVR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_XUSB_DEVW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA194_SID_XUSB_DEV>;
 			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBB>,
 					<&bpmp TEGRA194_POWER_DOMAIN_XUSBA>;
 			power-domain-names = "dev", "ss";
@ -977,6 +981,10 @@
 				      "xusb_ss", "xusb_ss_src", "xusb_hs_src",
 				      "xusb_fs_src", "pll_u_480m", "clk_m",
 				      "pll_e";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA194_SID_XUSB_HOST>;

 			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBC>,
 					<&bpmp TEGRA194_POWER_DOMAIN_XUSBA>;
@ -2469,6 +2477,11 @@
 		 * for 8x and 11.025x sample rate streams.
 		 */
 		assigned-clock-rates = <258000000>;
+
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_APEDMAR &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_APEDMAW &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA194_SID_APE>;
 	};

 	tcu: tcu {
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@ -1063,7 +1063,7 @@
 	status = "okay";
 	extcon = <&usb2_id>;

-	usb@7600000 {
+	dwc3@7600000 {
 		extcon = <&usb2_id>;
 		dr_mode = "otg";
 		maximum-speed = "high-speed";
@ -1074,7 +1074,7 @@
 	status = "okay";
 	extcon = <&usb3_id>;

-	usb@6a00000 {
+	dwc3@6a00000 {
 		extcon = <&usb3_id>;
 		dr_mode = "otg";
 	};
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@ -443,7 +443,7 @@
 			resets = <&gcc GCC_USB0_BCR>;
 			status = "disabled";

-			dwc_0: usb@8a00000 {
+			dwc_0: dwc3@8a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x8a00000 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
@ -484,7 +484,7 @@
 			resets = <&gcc GCC_USB1_BCR>;
 			status = "disabled";

-			dwc_1: usb@8c00000 {
+			dwc_1: dwc3@8c00000 {
 				compatible = "snps,dwc3";
 				reg = <0x8c00000 0xcd00>;
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@ -2566,7 +2566,7 @@
 			power-domains = <&gcc USB30_GDSC>;
 			status = "disabled";

-			usb@6a00000 {
+			dwc3@6a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x06a00000 0xcc00>;
 				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
@ -2873,7 +2873,7 @@
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";

-			usb@7600000 {
+			dwc3@7600000 {
 				compatible = "snps,dwc3";
 				reg = <0x07600000 0xcc00>;
 				interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@ -1964,7 +1964,7 @@

 			resets = <&gcc GCC_USB_30_BCR>;

-			usb3_dwc3: usb@a800000 {
+			usb3_dwc3: dwc3@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0x0a800000 0xcd00>;
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@ -337,7 +337,7 @@
 &usb3 {
 	status = "okay";

-	usb@7580000 {
+	dwc3@7580000 {
 		dr_mode = "host";
 	};
 };
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@ -544,7 +544,7 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 			status = "disabled";

-			usb@7580000 {
+			dwc3@7580000 {
 				compatible = "snps,dwc3";
 				reg = <0x07580000 0xcd00>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@ -573,7 +573,7 @@
 			assigned-clock-rates = <19200000>, <133333333>;
 			status = "disabled";

-			usb@78c0000 {
+			dwc3@78c0000 {
 				compatible = "snps,dwc3";
 				reg = <0x078c0000 0xcc00>;
 				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@ -2756,7 +2756,7 @@
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
 			interconnect-names = "usb-ddr", "apps-usb";

-			usb_1_dwc3: usb@a600000 {
+			usb_1_dwc3: dwc3@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xe000>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@ -3781,7 +3781,7 @@
 					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
 			interconnect-names = "usb-ddr", "apps-usb";

-			usb_1_dwc3: usb@a600000 {
+			usb_1_dwc3: dwc3@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
@ -3829,7 +3829,7 @@
 					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
 			interconnect-names = "usb-ddr", "apps-usb";

-			usb_2_dwc3: usb@a800000 {
+			usb_2_dwc3: dwc3@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a800000 0 0xcd00>;
 				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@ -2344,7 +2344,7 @@

 			resets = <&gcc GCC_USB30_PRIM_BCR>;

-			usb_1_dwc3: usb@a600000 {
+			usb_1_dwc3: dwc3@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@ -82,10 +82,10 @@
 				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi",
 					  "bri", "dri", "tei";
-			clocks = <&cpg CPG_MOD R9A07G044_CLK_SCIF0>;
+			clocks = <&cpg CPG_MOD R9A07G044_SCIF0_CLK_PCK>;
 			clock-names = "fck";
 			power-domains = <&cpg>;
-			resets = <&cpg R9A07G044_CLK_SCIF0>;
+			resets = <&cpg R9A07G044_SCIF0_RST_SYSTEM_N>;
 			status = "disabled";
 		};

--- a/arch/arm64/include/asm/cache.h
+++ b/arch/arm64/include/asm/cache.h
@ -47,7 +47,7 @@
 * cache before the transfer is done, causing old data to be seen by
 * the CPU.
 */
-#define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN	(128)

 #ifdef CONFIG_KASAN_SW_TAGS
 #define ARCH_SLAB_MINALIGN	(1ULL << KASAN_SHADOW_SCALE_SHIFT)
--- a/arch/arm64/include/asm/smp_plat.h
+++ b/arch/arm64/include/asm/smp_plat.h
@ -10,6 +10,7 @@

 #include <linux/cpumask.h>

+#include <asm/smp.h>
 #include <asm/types.h>

 struct mpidr_hash {
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@ -17,7 +17,7 @@ CFLAGS_syscall.o	+= -fno-stack-protector
 # It's not safe to invoke KCOV when portions of the kernel environment aren't
 # available or are out-of-sync with HW state. Since `noinstr` doesn't always
 # inhibit KCOV instrumentation, disable it for the entire compilation unit.
-KCOV_INSTRUMENT_entry.o := n
+KCOV_INSTRUMENT_entry-common.o := n
 KCOV_INSTRUMENT_idle.o := n

 # Object file lists.
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@ -81,6 +81,7 @@
 #include <asm/mmu_context.h>
 #include <asm/mte.h>
 #include <asm/processor.h>
+#include <asm/smp.h>
 #include <asm/sysreg.h>
 #include <asm/traps.h>
 #include <asm/virt.h>
--- a/arch/arm64/kernel/entry-common.c
+++ b/arch/arm64/kernel/entry-common.c
@ -604,7 +604,7 @@ asmlinkage void noinstr el0t_64_fiq_handler(struct pt_regs *regs)
 	__el0_fiq_handler_common(regs);
 }

-static void __el0_error_handler_common(struct pt_regs *regs)
+static void noinstr __el0_error_handler_common(struct pt_regs *regs)
 {
 	unsigned long esr = read_sysreg(esr_el1);

--- a/arch/arm64/kernel/mte.c
+++ b/arch/arm64/kernel/mte.c
@ -193,18 +193,6 @@ void mte_check_tfsr_el1(void)
 }
 #endif

-static void update_gcr_el1_excl(u64 excl)
-{
-
-	/*
-	 * Note that the mask controlled by the user via prctl() is an
-	 * include while GCR_EL1 accepts an exclude mask.
-	 * No need for ISB since this only affects EL0 currently, implicit
-	 * with ERET.
-	 */
-	sysreg_clear_set_s(SYS_GCR_EL1, SYS_GCR_EL1_EXCL_MASK, excl);
-}
-
 static void set_gcr_el1_excl(u64 excl)
 {
 	current->thread.gcr_user_excl = excl;
@ -265,7 +253,8 @@ void mte_suspend_exit(void)
 	if (!system_supports_mte())
 		return;

-	update_gcr_el1_excl(gcr_kernel_excl);
+	sysreg_clear_set_s(SYS_GCR_EL1, SYS_GCR_EL1_EXCL_MASK, gcr_kernel_excl);
+	isb();
 }

 long set_mte_ctrl(struct task_struct *task, unsigned long arg)
--- a/arch/arm64/kernel/smccc-call.S
+++ b/arch/arm64/kernel/smccc-call.S
@ -32,20 +32,23 @@ SYM_FUNC_END(__arm_smccc_sve_check)
 EXPORT_SYMBOL(__arm_smccc_sve_check)

 	.macro SMCCC instr
+	stp     x29, x30, [sp, #-16]!
+	mov	x29, sp
 alternative_if ARM64_SVE
 	bl	__arm_smccc_sve_check
 alternative_else_nop_endif
 	\instr	#0
-	ldr	x4, [sp]
+	ldr	x4, [sp, #16]
 	stp	x0, x1, [x4, #ARM_SMCCC_RES_X0_OFFS]
 	stp	x2, x3, [x4, #ARM_SMCCC_RES_X2_OFFS]
-	ldr	x4, [sp, #8]
+	ldr	x4, [sp, #24]
 	cbz	x4, 1f /* no quirk structure */
 	ldr	x9, [x4, #ARM_SMCCC_QUIRK_ID_OFFS]
 	cmp	x9, #ARM_SMCCC_QUIRK_QCOM_A6
 	b.ne	1f
 	str	x6, [x4, ARM_SMCCC_QUIRK_STATE_OFFS]
-1:	ret
+1:	ldp     x29, x30, [sp], #16
+	ret
 	.endm

 /*
--- a/arch/arm64/lib/copy_from_user.S
+++ b/arch/arm64/lib/copy_from_user.S
@ -29,7 +29,7 @@
 	.endm

 	.macro ldrh1 reg, ptr, val
-	user_ldst 9998f, ldtrh, \reg, \ptr, \val
+	user_ldst 9997f, ldtrh, \reg, \ptr, \val
 	.endm

 	.macro strh1 reg, ptr, val
@ -37,7 +37,7 @@
 	.endm

 	.macro ldr1 reg, ptr, val
-	user_ldst 9998f, ldtr, \reg, \ptr, \val
+	user_ldst 9997f, ldtr, \reg, \ptr, \val
 	.endm

 	.macro str1 reg, ptr, val
@ -45,7 +45,7 @@
 	.endm

 	.macro ldp1 reg1, reg2, ptr, val
-	user_ldp 9998f, \reg1, \reg2, \ptr, \val
+	user_ldp 9997f, \reg1, \reg2, \ptr, \val
 	.endm

 	.macro stp1 reg1, reg2, ptr, val
@ -53,8 +53,10 @@
 	.endm

 end	.req	x5
+srcin	.req	x15
 SYM_FUNC_START(__arch_copy_from_user)
 	add	end, x0, x2
+	mov	srcin, x1
 #include "copy_template.S"
 	mov	x0, #0				// Nothing to copy
 	ret
@ -63,6 +65,11 @@ EXPORT_SYMBOL(__arch_copy_from_user)

 	.section .fixup,"ax"
 	.align	2
+9997:	cmp	dst, dstin
+	b.ne	9998f
+	// Before being absolutely sure we couldn't copy anything, try harder
+USER(9998f, ldtrb tmp1w, [srcin])
+	strb	tmp1w, [dst], #1
 9998:	sub	x0, end, dst			// bytes not copied
 	ret
 	.previous
--- a/arch/arm64/lib/copy_in_user.S
+++ b/arch/arm64/lib/copy_in_user.S
@ -30,33 +30,34 @@
 	.endm

 	.macro ldrh1 reg, ptr, val
-	user_ldst 9998f, ldtrh, \reg, \ptr, \val
+	user_ldst 9997f, ldtrh, \reg, \ptr, \val
 	.endm

 	.macro strh1 reg, ptr, val
-	user_ldst 9998f, sttrh, \reg, \ptr, \val
+	user_ldst 9997f, sttrh, \reg, \ptr, \val
 	.endm

 	.macro ldr1 reg, ptr, val
-	user_ldst 9998f, ldtr, \reg, \ptr, \val
+	user_ldst 9997f, ldtr, \reg, \ptr, \val
 	.endm

 	.macro str1 reg, ptr, val
-	user_ldst 9998f, sttr, \reg, \ptr, \val
+	user_ldst 9997f, sttr, \reg, \ptr, \val
 	.endm

 	.macro ldp1 reg1, reg2, ptr, val
-	user_ldp 9998f, \reg1, \reg2, \ptr, \val
+	user_ldp 9997f, \reg1, \reg2, \ptr, \val
 	.endm

 	.macro stp1 reg1, reg2, ptr, val
-	user_stp 9998f, \reg1, \reg2, \ptr, \val
+	user_stp 9997f, \reg1, \reg2, \ptr, \val
 	.endm

 end	.req	x5
-
+srcin	.req	x15
 SYM_FUNC_START(__arch_copy_in_user)
 	add	end, x0, x2
+	mov	srcin, x1
 #include "copy_template.S"
 	mov	x0, #0
 	ret
@ -65,6 +66,12 @@ EXPORT_SYMBOL(__arch_copy_in_user)

 	.section .fixup,"ax"
 	.align	2
+9997:	cmp	dst, dstin
+	b.ne	9998f
+	// Before being absolutely sure we couldn't copy anything, try harder
+USER(9998f, ldtrb tmp1w, [srcin])
+USER(9998f, sttrb tmp1w, [dst])
+	add	dst, dst, #1
 9998:	sub	x0, end, dst			// bytes not copied
 	ret
 	.previous
--- a/arch/arm64/lib/copy_to_user.S
+++ b/arch/arm64/lib/copy_to_user.S
@ -32,7 +32,7 @@
 	.endm

 	.macro strh1 reg, ptr, val
-	user_ldst 9998f, sttrh, \reg, \ptr, \val
+	user_ldst 9997f, sttrh, \reg, \ptr, \val
 	.endm

 	.macro ldr1 reg, ptr, val
@ -40,7 +40,7 @@
 	.endm

 	.macro str1 reg, ptr, val
-	user_ldst 9998f, sttr, \reg, \ptr, \val
+	user_ldst 9997f, sttr, \reg, \ptr, \val
 	.endm

 	.macro ldp1 reg1, reg2, ptr, val
@ -48,12 +48,14 @@
 	.endm

 	.macro stp1 reg1, reg2, ptr, val
-	user_stp 9998f, \reg1, \reg2, \ptr, \val
+	user_stp 9997f, \reg1, \reg2, \ptr, \val
 	.endm

 end	.req	x5
+srcin	.req	x15
 SYM_FUNC_START(__arch_copy_to_user)
 	add	end, x0, x2
+	mov	srcin, x1
 #include "copy_template.S"
 	mov	x0, #0
 	ret
@ -62,6 +64,12 @@ EXPORT_SYMBOL(__arch_copy_to_user)

 	.section .fixup,"ax"
 	.align	2
+9997:	cmp	dst, dstin
+	b.ne	9998f
+	// Before being absolutely sure we couldn't copy anything, try harder
+	ldrb	tmp1w, [srcin]
+USER(9998f, sttrb tmp1w, [dst])
+	add	dst, dst, #1
 9998:	sub	x0, end, dst			// bytes not copied
 	ret
 	.previous
--- a/arch/arm64/lib/strlen.S
+++ b/arch/arm64/lib/strlen.S
@ -8,6 +8,7 @@

 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/mte-def.h>

 /* Assumptions:
 *
@ -42,7 +43,16 @@
 #define REP8_7f 0x7f7f7f7f7f7f7f7f
 #define REP8_80 0x8080808080808080

+/*
+ * When KASAN_HW_TAGS is in use, memory is checked at MTE_GRANULE_SIZE
+ * (16-byte) granularity, and we must ensure that no access straddles this
+ * alignment boundary.
+ */
+#ifdef CONFIG_KASAN_HW_TAGS
+#define MIN_PAGE_SIZE MTE_GRANULE_SIZE
+#else
 #define MIN_PAGE_SIZE 4096
+#endif

 	/* Since strings are short on average, we check the first 16 bytes
 	   of the string for a NUL character.  In order to do an unaligned ldp
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@ -1339,7 +1339,6 @@ void *__init fixmap_remap_fdt(phys_addr_t dt_phys, int *size, pgprot_t prot)
 	return dt_virt;
 }

-#if CONFIG_PGTABLE_LEVELS > 3
 int pud_set_huge(pud_t *pudp, phys_addr_t phys, pgprot_t prot)
 {
 	pud_t new_pud = pfn_pud(__phys_to_pfn(phys), mk_pud_sect_prot(prot));
@ -1354,16 +1353,6 @@ int pud_set_huge(pud_t *pudp, phys_addr_t phys, pgprot_t prot)
 	return 1;
 }

-int pud_clear_huge(pud_t *pudp)
-{
-	if (!pud_sect(READ_ONCE(*pudp)))
-		return 0;
-	pud_clear(pudp);
-	return 1;
-}
-#endif
-
-#if CONFIG_PGTABLE_LEVELS > 2
 int pmd_set_huge(pmd_t *pmdp, phys_addr_t phys, pgprot_t prot)
 {
 	pmd_t new_pmd = pfn_pmd(__phys_to_pfn(phys), mk_pmd_sect_prot(prot));
@ -1378,6 +1367,14 @@ int pmd_set_huge(pmd_t *pmdp, phys_addr_t phys, pgprot_t prot)
 	return 1;
 }

+int pud_clear_huge(pud_t *pudp)
+{
+	if (!pud_sect(READ_ONCE(*pudp)))
+		return 0;
+	pud_clear(pudp);
+	return 1;
+}
+
 int pmd_clear_huge(pmd_t *pmdp)
 {
 	if (!pmd_sect(READ_ONCE(*pmdp)))
@ -1385,7 +1382,6 @@ int pmd_clear_huge(pmd_t *pmdp)
 	pmd_clear(pmdp);
 	return 1;
 }
-#endif

 int pmd_free_pte_page(pmd_t *pmdp, unsigned long addr)
 {
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@ -33,6 +33,7 @@ config MAC
 	depends on MMU
 	select MMU_MOTOROLA if MMU
 	select HAVE_ARCH_NVRAM_OPS
+	select HAVE_PATA_PLATFORM
 	select LEGACY_TIMER_TICK
 	help
 	  This option enables support for the Apple Macintosh series of
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@ -76,7 +76,7 @@ static inline int __enable_fpu(enum fpu_mode mode)
 		/* we only have a 32-bit FPU */
 		return SIGFPE;
 #endif
-		fallthrough;
+		/* fallthrough */
 	case FPU_32BIT:
 		if (cpu_has_fre) {
 			/* clear FRE */
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@ -1383,6 +1383,7 @@ static void build_r4000_tlb_refill_handler(void)
 	switch (boot_cpu_type()) {
 	default:
 		if (sizeof(long) == 4) {
+		fallthrough;
 	case CPU_LOONGSON2EF:
 		/* Loongson2 ebase is different than r4k, we have more space */
 			if ((p - tlb_handler) > 64)
@ -2169,6 +2170,7 @@ static void build_r4000_tlb_load_handler(void)
 		default:
 			if (cpu_has_mips_r2_exec_hazard) {
 				uasm_i_ehb(&p);
+			fallthrough;

 		case CPU_CAVIUM_OCTEON:
 		case CPU_CAVIUM_OCTEON_PLUS:
--- a/arch/nds32/mm/mmap.c
+++ b/arch/nds32/mm/mmap.c
@ -59,7 +59,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,

 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}

--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@ -2697,8 +2697,10 @@ static int kvmppc_core_vcpu_create_hv(struct kvm_vcpu *vcpu)
 		HFSCR_DSCR | HFSCR_VECVSX | HFSCR_FP | HFSCR_PREFIX;
 	if (cpu_has_feature(CPU_FTR_HVMODE)) {
 		vcpu->arch.hfscr &= mfspr(SPRN_HFSCR);
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 		if (cpu_has_feature(CPU_FTR_P9_TM_HV_ASSIST))
 			vcpu->arch.hfscr |= HFSCR_TM;
+#endif
 	}
 	if (cpu_has_feature(CPU_FTR_TM_COMP))
 		vcpu->arch.hfscr |= HFSCR_TM;
--- a/arch/powerpc/kvm/book3s_hv_nested.c
+++ b/arch/powerpc/kvm/book3s_hv_nested.c
@ -302,6 +302,9 @@ long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
 	if (vcpu->kvm->arch.l1_ptcr == 0)
 		return H_NOT_AVAILABLE;

+	if (MSR_TM_TRANSACTIONAL(vcpu->arch.shregs.msr))
+		return H_BAD_MODE;
+
 	/* copy parameters in */
 	hv_ptr = kvmppc_get_gpr(vcpu, 4);
 	regs_ptr = kvmppc_get_gpr(vcpu, 5);
@ -322,6 +325,23 @@ long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
 	if (l2_hv.vcpu_token >= NR_CPUS)
 		return H_PARAMETER;

+	/*
+	 * L1 must have set up a suspended state to enter the L2 in a
+	 * transactional state, and only in that case. These have to be
+	 * filtered out here to prevent causing a TM Bad Thing in the
+	 * host HRFID. We could synthesize a TM Bad Thing back to the L1
+	 * here but there doesn't seem like much point.
+	 */
+	if (MSR_TM_SUSPENDED(vcpu->arch.shregs.msr)) {
+		if (!MSR_TM_ACTIVE(l2_regs.msr))
+			return H_BAD_MODE;
+	} else {
+		if (l2_regs.msr & MSR_TS_MASK)
+			return H_BAD_MODE;
+		if (WARN_ON_ONCE(vcpu->arch.shregs.msr & MSR_TS_MASK))
+			return H_BAD_MODE;
+	}
+
 	/* translate lpid */
 	l2 = kvmhv_get_nested(vcpu->kvm, l2_hv.lpid, true);
 	if (!l2)
--- a/arch/powerpc/kvm/book3s_hv_p9_entry.c
+++ b/arch/powerpc/kvm/book3s_hv_p9_entry.c
@ -317,6 +317,9 @@ int kvmhv_vcpu_entry_p9(struct kvm_vcpu *vcpu, u64 time_limit, unsigned long lpc
 	 */
 	mtspr(SPRN_HDEC, hdec);

+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+tm_return_to_guest:
+#endif
 	mtspr(SPRN_DAR, vcpu->arch.shregs.dar);
 	mtspr(SPRN_DSISR, vcpu->arch.shregs.dsisr);
 	mtspr(SPRN_SRR0, vcpu->arch.shregs.srr0);
@ -415,11 +418,23 @@ int kvmhv_vcpu_entry_p9(struct kvm_vcpu *vcpu, u64 time_limit, unsigned long lpc
 		 * is in real suspend mode and is trying to transition to
 		 * transactional mode.
 		 */
-		if (local_paca->kvm_hstate.fake_suspend &&
+		if (!local_paca->kvm_hstate.fake_suspend &&
 				(vcpu->arch.shregs.msr & MSR_TS_S)) {
 			if (kvmhv_p9_tm_emulation_early(vcpu)) {
-				/* Prevent it being handled again. */
-				trap = 0;
+				/*
+				 * Go straight back into the guest with the
+				 * new NIP/MSR as set by TM emulation.
+				 */
+				mtspr(SPRN_HSRR0, vcpu->arch.regs.nip);
+				mtspr(SPRN_HSRR1, vcpu->arch.shregs.msr);
+
+				/*
+				 * tm_return_to_guest re-loads SRR0/1, DAR,
+				 * DSISR after RI is cleared, in case they had
+				 * been clobbered by a MCE.
+				 */
+				__mtmsrd(0, 1); /* clear RI */
+				goto tm_return_to_guest;
 			}
 		}
 #endif
@ -499,6 +514,10 @@ int kvmhv_vcpu_entry_p9(struct kvm_vcpu *vcpu, u64 time_limit, unsigned long lpc
 	 * If we are in real mode, only switch MMU on after the MMU is
 	 * switched to host, to avoid the P9_RADIX_PREFETCH_BUG.
 	 */
+	if (IS_ENABLED(CONFIG_PPC_TRANSACTIONAL_MEM) &&
+	    vcpu->arch.shregs.msr & MSR_TS_MASK)
+		msr |= MSR_TS_S;
+
 	__mtmsrd(msr, 0);

 	end_timing(vcpu);
--- a/arch/powerpc/kvm/book3s_rtas.c
+++ b/arch/powerpc/kvm/book3s_rtas.c
@ -242,6 +242,17 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *vcpu)
 	 * value so we can restore it on the way out.
 	 */
 	orig_rets = args.rets;
+	if (be32_to_cpu(args.nargs) >= ARRAY_SIZE(args.args)) {
+		/*
+		 * Don't overflow our args array: ensure there is room for
+		 * at least rets[0] (even if the call specifies 0 nret).
+		 *
+		 * Each handler must then check for the correct nargs and nret
+		 * values, but they may always return failure in rets[0].
+		 */
+		rc = -EINVAL;
+		goto fail;
+	}
 	args.rets = &args.args[be32_to_cpu(args.nargs)];

 	mutex_lock(&vcpu->kvm->arch.rtas_token_lock);
@ -269,9 +280,17 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *vcpu)
 fail:
 	/*
 	 * We only get here if the guest has called RTAS with a bogus
-	 * args pointer. That means we can't get to the args, and so we
-	 * can't fail the RTAS call. So fail right out to userspace,
-	 * which should kill the guest.
+	 * args pointer or nargs/nret values that would overflow the
+	 * array. That means we can't get to the args, and so we can't
+	 * fail the RTAS call. So fail right out to userspace, which
+	 * should kill the guest.
+	 *
+	 * SLOF should actually pass the hcall return value from the
+	 * rtas handler call in r3, so enter_rtas could be modified to
+	 * return a failure indication in r3 and we could return such
+	 * errors to the guest rather than failing to host userspace.
+	 * However old guests that don't test for failure could then
+	 * continue silently after errors, so for now we won't do this.
 	 */
 	return rc;
 }
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@ -2048,9 +2048,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 	{
 		struct kvm_enable_cap cap;
 		r = -EFAULT;
-		vcpu_load(vcpu);
 		if (copy_from_user(&cap, argp, sizeof(cap)))
 			goto out;
+		vcpu_load(vcpu);
 		r = kvm_vcpu_ioctl_enable_cap(vcpu, &cap);
 		vcpu_put(vcpu);
 		break;
@ -2074,9 +2074,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 	case KVM_DIRTY_TLB: {
 		struct kvm_dirty_tlb dirty;
 		r = -EFAULT;
-		vcpu_load(vcpu);
 		if (copy_from_user(&dirty, argp, sizeof(dirty)))
 			goto out;
+		vcpu_load(vcpu);
 		r = kvm_vcpu_ioctl_dirty_tlb(vcpu, &dirty);
 		vcpu_put(vcpu);
 		break;
--- a/arch/powerpc/mm/nohash/8xx.c
+++ b/arch/powerpc/mm/nohash/8xx.c
@ -240,3 +240,13 @@ void __init setup_kuap(bool disabled)
 	mtspr(SPRN_MD_AP, MD_APG_KUAP);
 }
 #endif
+
+int pud_clear_huge(pud_t *pud)
+{
+	 return 0;
+}
+
+int pmd_clear_huge(pmd_t *pmd)
+{
+	 return 0;
+}
--- a/arch/powerpc/platforms/pasemi/idle.c
+++ b/arch/powerpc/platforms/pasemi/idle.c
@ -42,6 +42,7 @@ static int pasemi_system_reset_exception(struct pt_regs *regs)
 	switch (regs->msr & SRR1_WAKEMASK) {
 	case SRR1_WAKEDEC:
 		set_dec(1);
+		break;
 	case SRR1_WAKEEE:
 		/*
 		 * Handle these when interrupts get re-enabled and we take
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@ -146,6 +146,7 @@ static inline void psurge_clr_ipi(int cpu)
 		switch(psurge_type) {
 		case PSURGE_DUAL:
 			out_8(psurge_sec_intr, ~0);
+			break;
 		case PSURGE_NONE:
 			break;
 		default:
--- a/arch/riscv/include/asm/efi.h
+++ b/arch/riscv/include/asm/efi.h
@ -27,10 +27,10 @@ int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);

 #define ARCH_EFI_IRQ_FLAGS_MASK (SR_IE | SR_SPIE)

-/* Load initrd at enough distance from DRAM start */
+/* Load initrd anywhere in system RAM */
 static inline unsigned long efi_get_max_initrd_addr(unsigned long image_addr)
 {
-	return image_addr + SZ_256M;
+	return ULONG_MAX;
 }

 #define alloc_screen_info(x...)		(&screen_info)
--- a/arch/riscv/kernel/stacktrace.c
+++ b/arch/riscv/kernel/stacktrace.c
@ -132,8 +132,12 @@ unsigned long get_wchan(struct task_struct *task)
 {
 	unsigned long pc = 0;

-	if (likely(task && task != current && !task_is_running(task)))
+	if (likely(task && task != current && !task_is_running(task))) {
+		if (!try_get_task_stack(task))
+			return 0;
 		walk_stackframe(task, NULL, save_wchan, &pc);
+		put_task_stack(task);
+	}
 	return pc;
 }

--- a/arch/riscv/lib/uaccess.S
+++ b/arch/riscv/lib/uaccess.S
@ -30,23 +30,23 @@ ENTRY(__asm_copy_from_user)
 	 * t0 - end of uncopied dst
 	 */
 	add	t0, a0, a2
-	bgtu	a0, t0, 5f

 	/*
 	 * Use byte copy only if too small.
+	 * SZREG holds 4 for RV32 and 8 for RV64
 	 */
-	li	a3, 8*SZREG /* size must be larger than size in word_copy */
+	li	a3, 9*SZREG /* size must be larger than size in word_copy */
 	bltu	a2, a3, .Lbyte_copy_tail

 	/*
-	 * Copy first bytes until dst is align to word boundary.
+	 * Copy first bytes until dst is aligned to word boundary.
 	 * a0 - start of dst
 	 * t1 - start of aligned dst
 	 */
 	addi	t1, a0, SZREG-1
 	andi	t1, t1, ~(SZREG-1)
 	/* dst is already aligned, skip */
-	beq	a0, t1, .Lskip_first_bytes
+	beq	a0, t1, .Lskip_align_dst
 1:
 	/* a5 - one byte for copying data */
 	fixup lb      a5, 0(a1), 10f
@ -55,7 +55,7 @@ ENTRY(__asm_copy_from_user)
 	addi	a0, a0, 1	/* dst */
 	bltu	a0, t1, 1b	/* t1 - start of aligned dst */

-.Lskip_first_bytes:
+.Lskip_align_dst:
 	/*
 	 * Now dst is aligned.
 	 * Use shift-copy if src is misaligned.
@ -72,10 +72,9 @@ ENTRY(__asm_copy_from_user)
 	 *
 	 * a0 - start of aligned dst
 	 * a1 - start of aligned src
-	 * a3 - a1 & mask:(SZREG-1)
 	 * t0 - end of aligned dst
 	 */
-	addi	t0, t0, -(8*SZREG-1) /* not to over run */
+	addi	t0, t0, -(8*SZREG) /* not to over run */
 2:
 	fixup REG_L   a4,        0(a1), 10f
 	fixup REG_L   a5,    SZREG(a1), 10f
@ -97,7 +96,7 @@ ENTRY(__asm_copy_from_user)
 	addi	a1, a1, 8*SZREG
 	bltu	a0, t0, 2b

-	addi	t0, t0, 8*SZREG-1 /* revert to original value */
+	addi	t0, t0, 8*SZREG /* revert to original value */
 	j	.Lbyte_copy_tail

 .Lshift_copy:
@ -107,7 +106,7 @@ ENTRY(__asm_copy_from_user)
 	 * For misaligned copy we still perform aligned word copy, but
 	 * we need to use the value fetched from the previous iteration and
 	 * do some shifts.
-	 * This is safe because reading less than a word size.
+	 * This is safe because reading is less than a word size.
 	 *
 	 * a0 - start of aligned dst
 	 * a1 - start of src
@ -117,7 +116,7 @@ ENTRY(__asm_copy_from_user)
 	 */
 	/* calculating aligned word boundary for dst */
 	andi	t1, t0, ~(SZREG-1)
-	/* Converting unaligned src to aligned arc */
+	/* Converting unaligned src to aligned src */
 	andi	a1, a1, ~(SZREG-1)

 	/*
@ -125,11 +124,11 @@ ENTRY(__asm_copy_from_user)
 	 * t3 - prev shift
 	 * t4 - current shift
 	 */
-	slli	t3, a3, LGREG
+	slli	t3, a3, 3 /* converting bytes in a3 to bits */
 	li	a5, SZREG*8
 	sub	t4, a5, t3

-	/* Load the first word to combine with seceond word */
+	/* Load the first word to combine with second word */
 	fixup REG_L   a5, 0(a1), 10f

 3:
@ -161,7 +160,7 @@ ENTRY(__asm_copy_from_user)
 	 * a1 - start of remaining src
 	 * t0 - end of remaining dst
 	 */
-	bgeu	a0, t0, 5f
+	bgeu	a0, t0, .Lout_copy_user  /* check if end of copy */
 4:
 	fixup lb      a5, 0(a1), 10f
 	addi	a1, a1, 1	/* src */
@ -169,7 +168,7 @@ ENTRY(__asm_copy_from_user)
 	addi	a0, a0, 1	/* dst */
 	bltu	a0, t0, 4b	/* t0 - end of dst */

-5:
+.Lout_copy_user:
 	/* Disable access to user memory */
 	csrc CSR_STATUS, t6
 	li	a0, 0
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@ -127,10 +127,17 @@ void __init mem_init(void)
 }

 /*
- * The default maximal physical memory size is -PAGE_OFFSET,
- * limit the memory size via mem.
+ * The default maximal physical memory size is -PAGE_OFFSET for 32-bit kernel,
+ * whereas for 64-bit kernel, the end of the virtual address space is occupied
+ * by the modules/BPF/kernel mappings which reduces the available size of the
+ * linear mapping.
+ * Limit the memory size via mem.
 */
+#ifdef CONFIG_64BIT
+static phys_addr_t memory_limit = -PAGE_OFFSET - SZ_4G;
+#else
 static phys_addr_t memory_limit = -PAGE_OFFSET;
+#endif

 static int __init early_mem(char *p)
 {
@ -152,7 +159,7 @@ static void __init setup_bootmem(void)
 {
 	phys_addr_t vmlinux_end = __pa_symbol(&_end);
 	phys_addr_t vmlinux_start = __pa_symbol(&_start);
-	phys_addr_t max_mapped_addr = __pa(~(ulong)0);
+	phys_addr_t __maybe_unused max_mapped_addr;
 	phys_addr_t dram_end;

 #ifdef CONFIG_XIP_KERNEL
@ -175,14 +182,21 @@ static void __init setup_bootmem(void)
 	memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start);

 	dram_end = memblock_end_of_DRAM();
+
+#ifndef CONFIG_64BIT
 	/*
 	 * memblock allocator is not aware of the fact that last 4K bytes of
 	 * the addressable memory can not be mapped because of IS_ERR_VALUE
 	 * macro. Make sure that last 4k bytes are not usable by memblock
-	 * if end of dram is equal to maximum addressable memory.
+	 * if end of dram is equal to maximum addressable memory.  For 64-bit
+	 * kernel, this problem can't happen here as the end of the virtual
+	 * address space is occupied by the kernel mapping then this check must
+	 * be done in create_kernel_page_table.
 	 */
+	max_mapped_addr = __pa(~(ulong)0);
 	if (max_mapped_addr == (dram_end - 1))
 		memblock_set_current_limit(max_mapped_addr - 4096);
+#endif

 	min_low_pfn = PFN_UP(memblock_start_of_DRAM());
 	max_low_pfn = max_pfn = PFN_DOWN(dram_end);
@ -570,6 +584,14 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 	BUG_ON((PAGE_OFFSET % PGDIR_SIZE) != 0);
 	BUG_ON((kernel_map.phys_addr % map_size) != 0);

+#ifdef CONFIG_64BIT
+	/*
+	 * The last 4K bytes of the addressable memory can not be mapped because
+	 * of IS_ERR_VALUE macro.
+	 */
+	BUG_ON((kernel_map.virt_addr + kernel_map.size) > ADDRESS_SPACE_END - SZ_4K);
+#endif
+
 	pt_ops.alloc_pte = alloc_pte_early;
 	pt_ops.get_pte_virt = get_pte_virt_early;
 #ifndef __PAGETABLE_PMD_FOLDED
@ -709,6 +731,8 @@ static void __init setup_vm_final(void)
 		if (start <= __pa(PAGE_OFFSET) &&
 		    __pa(PAGE_OFFSET) < end)
 			start = __pa(PAGE_OFFSET);
+		if (end >= __pa(PAGE_OFFSET) + memory_limit)
+			end = __pa(PAGE_OFFSET) + memory_limit;

 		map_size = best_map_size(start, end - start);
 		for (pa = start; pa < end; pa += map_size) {
--- a/arch/s390/boot/text_dma.S
+++ b/arch/s390/boot/text_dma.S
@ -9,16 +9,6 @@
 #include <asm/errno.h>
 #include <asm/sigp.h>

-#ifdef CC_USING_EXPOLINE
-	.pushsection .dma.text.__s390_indirect_jump_r14,"axG"
-__dma__s390_indirect_jump_r14:
-	larl	%r1,0f
-	ex	0,0(%r1)
-	j	.
-0:	br	%r14
-	.popsection
-#endif
-
 	.section .dma.text,"ax"
 /*
 * Simplified version of expoline thunk. The normal thunks can not be used here,
@ -27,11 +17,10 @@ __dma__s390_indirect_jump_r14:
 * affects a few functions that are not performance-relevant.
 */
 	.macro BR_EX_DMA_r14
-#ifdef CC_USING_EXPOLINE
-	jg	__dma__s390_indirect_jump_r14
-#else
-	br	%r14
-#endif
+	larl	%r1,0f
+	ex	0,0(%r1)
+	j	.
+0:	br	%r14
 	.endm

 /*
--- a/arch/s390/configs/debug_defconfig
+++ b/arch/s390/configs/debug_defconfig
@ -5,7 +5,12 @@ CONFIG_WATCH_QUEUE=y
 CONFIG_AUDIT=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_BPF_JIT=y
+CONFIG_BPF_JIT_ALWAYS_ON=y
+CONFIG_BPF_LSM=y
 CONFIG_PREEMPT=y
+CONFIG_SCHED_CORE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
@ -28,14 +33,13 @@ CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_CGROUP_PERF=y
 CONFIG_CGROUP_BPF=y
+CONFIG_CGROUP_MISC=y
 CONFIG_NAMESPACES=y
 CONFIG_USER_NS=y
 CONFIG_CHECKPOINT_RESTORE=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_EXPERT=y
 # CONFIG_SYSFS_SYSCALL is not set
-CONFIG_BPF_LSM=y
-CONFIG_BPF_SYSCALL=y
 CONFIG_USERFAULTFD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
@ -76,6 +80,7 @@ CONFIG_BLK_DEV_THROTTLING=y
 CONFIG_BLK_WBT=y
 CONFIG_BLK_CGROUP_IOLATENCY=y
 CONFIG_BLK_CGROUP_IOCOST=y
+CONFIG_BLK_CGROUP_IOPRIO=y
 CONFIG_BLK_INLINE_ENCRYPTION=y
 CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y
 CONFIG_PARTITION_ADVANCED=y
@ -95,6 +100,7 @@ CONFIG_CLEANCACHE=y
 CONFIG_FRONTSWAP=y
 CONFIG_CMA_DEBUG=y
 CONFIG_CMA_DEBUGFS=y
+CONFIG_CMA_SYSFS=y
 CONFIG_CMA_AREAS=7
 CONFIG_MEM_SOFT_DIRTY=y
 CONFIG_ZSWAP=y
@ -158,6 +164,7 @@ CONFIG_IPV6_RPL_LWTUNNEL=y
 CONFIG_MPTCP=y
 CONFIG_NETFILTER=y
 CONFIG_BRIDGE_NETFILTER=m
+CONFIG_NETFILTER_NETLINK_HOOK=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
@ -280,6 +287,7 @@ CONFIG_IP_VS_FTP=m
 CONFIG_IP_VS_PE_SIP=m
 CONFIG_NFT_FIB_IPV4=m
 CONFIG_NF_TABLES_ARP=y
+CONFIG_NF_LOG_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
@ -384,12 +392,11 @@ CONFIG_VSOCKETS=m
 CONFIG_VIRTIO_VSOCKETS=m
 CONFIG_NETLINK_DIAG=m
 CONFIG_CGROUP_NET_PRIO=y
-CONFIG_BPF_JIT=y
 CONFIG_NET_PKTGEN=m
 CONFIG_PCI=y
-CONFIG_PCI_IOV=y
 # CONFIG_PCIEASPM is not set
 CONFIG_PCI_DEBUG=y
+CONFIG_PCI_IOV=y
 CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_S390=y
 CONFIG_DEVTMPFS=y
@ -436,7 +443,7 @@ CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_MD_CLUSTER=m
 CONFIG_BCACHE=m
-CONFIG_BLK_DEV_DM=m
+CONFIG_BLK_DEV_DM=y
 CONFIG_DM_UNSTRIPED=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
@ -453,6 +460,7 @@ CONFIG_DM_MULTIPATH_ST=m
 CONFIG_DM_MULTIPATH_HST=m
 CONFIG_DM_MULTIPATH_IOA=m
 CONFIG_DM_DELAY=m
+CONFIG_DM_INIT=y
 CONFIG_DM_UEVENT=y
 CONFIG_DM_FLAKEY=m
 CONFIG_DM_VERITY=m
@ -495,6 +503,7 @@ CONFIG_NLMON=m
 # CONFIG_NET_VENDOR_GOOGLE is not set
 # CONFIG_NET_VENDOR_HUAWEI is not set
 # CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICROSOFT is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 CONFIG_MLX4_EN=m
 CONFIG_MLX5_CORE=m
@ -551,7 +560,6 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_LEGACY_PTY_COUNT=0
 CONFIG_VIRTIO_CONSOLE=m
 CONFIG_HW_RANDOM_VIRTIO=m
-CONFIG_RAW_DRIVER=m
 CONFIG_HANGCHECK_TIMER=m
 CONFIG_TN3270_FS=y
 CONFIG_PPS=m
@ -574,7 +582,6 @@ CONFIG_SYNC_FILE=y
 CONFIG_VFIO=m
 CONFIG_VFIO_PCI=m
 CONFIG_VFIO_MDEV=m
-CONFIG_VFIO_MDEV_DEVICE=m
 CONFIG_VIRTIO_PCI=m
 CONFIG_VIRTIO_BALLOON=m
 CONFIG_VIRTIO_INPUT=y
@ -619,6 +626,7 @@ CONFIG_FUSE_FS=y
 CONFIG_CUSE=m
 CONFIG_VIRTIO_FS=m
 CONFIG_OVERLAY_FS=m
+CONFIG_NETFS_STATS=y
 CONFIG_FSCACHE=m
 CONFIG_CACHEFILES=m
 CONFIG_ISO9660_FS=y
@ -654,7 +662,6 @@ CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_V4_SECURITY_LABEL=y
 CONFIG_CIFS=m
-CONFIG_CIFS_STATS2=y
 CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_UPCALL=y
 CONFIG_CIFS_XATTR=y
@ -682,6 +689,7 @@ CONFIG_SECURITY_SELINUX_BOOTPARAM=y
 CONFIG_SECURITY_SELINUX_DISABLE=y
 CONFIG_SECURITY_LOCKDOWN_LSM=y
 CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
+CONFIG_SECURITY_LANDLOCK=y
 CONFIG_INTEGRITY_SIGNATURE=y
 CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
 CONFIG_IMA=y
@ -696,6 +704,7 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
+CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
 CONFIG_CRYPTO_SM2=m
 CONFIG_CRYPTO_CURVE25519=m
@ -843,7 +852,6 @@ CONFIG_FAULT_INJECTION_DEBUG_FS=y
 CONFIG_FAIL_FUNCTION=y
 CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
 CONFIG_LKDTM=m
-CONFIG_TEST_LIST_SORT=y
 CONFIG_TEST_MIN_HEAP=y
 CONFIG_TEST_SORT=y
 CONFIG_KPROBES_SANITY_TEST=y
@ -853,3 +861,4 @@ CONFIG_PERCPU_TEST=m
 CONFIG_ATOMIC64_SELFTEST=y
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_BPF=m
+CONFIG_TEST_LIVEPATCH=m
--- a/arch/s390/configs/defconfig
+++ b/arch/s390/configs/defconfig
@ -4,6 +4,11 @@ CONFIG_WATCH_QUEUE=y
 CONFIG_AUDIT=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_BPF_JIT=y
+CONFIG_BPF_JIT_ALWAYS_ON=y
+CONFIG_BPF_LSM=y
+CONFIG_SCHED_CORE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
@ -26,14 +31,13 @@ CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_CGROUP_PERF=y
 CONFIG_CGROUP_BPF=y
+CONFIG_CGROUP_MISC=y
 CONFIG_NAMESPACES=y
 CONFIG_USER_NS=y
 CONFIG_CHECKPOINT_RESTORE=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_EXPERT=y
 # CONFIG_SYSFS_SYSCALL is not set
-CONFIG_BPF_LSM=y
-CONFIG_BPF_SYSCALL=y
 CONFIG_USERFAULTFD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
@ -70,6 +74,7 @@ CONFIG_BLK_DEV_THROTTLING=y
 CONFIG_BLK_WBT=y
 CONFIG_BLK_CGROUP_IOLATENCY=y
 CONFIG_BLK_CGROUP_IOCOST=y
+CONFIG_BLK_CGROUP_IOPRIO=y
 CONFIG_BLK_INLINE_ENCRYPTION=y
 CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y
 CONFIG_PARTITION_ADVANCED=y
@ -87,6 +92,7 @@ CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
 CONFIG_CLEANCACHE=y
 CONFIG_FRONTSWAP=y
+CONFIG_CMA_SYSFS=y
 CONFIG_CMA_AREAS=7
 CONFIG_MEM_SOFT_DIRTY=y
 CONFIG_ZSWAP=y
@ -149,6 +155,7 @@ CONFIG_IPV6_RPL_LWTUNNEL=y
 CONFIG_MPTCP=y
 CONFIG_NETFILTER=y
 CONFIG_BRIDGE_NETFILTER=m
+CONFIG_NETFILTER_NETLINK_HOOK=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
@ -271,6 +278,7 @@ CONFIG_IP_VS_FTP=m
 CONFIG_IP_VS_PE_SIP=m
 CONFIG_NFT_FIB_IPV4=m
 CONFIG_NF_TABLES_ARP=y
+CONFIG_NF_LOG_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
@ -374,11 +382,10 @@ CONFIG_VSOCKETS=m
 CONFIG_VIRTIO_VSOCKETS=m
 CONFIG_NETLINK_DIAG=m
 CONFIG_CGROUP_NET_PRIO=y
-CONFIG_BPF_JIT=y
 CONFIG_NET_PKTGEN=m
 CONFIG_PCI=y
-CONFIG_PCI_IOV=y
 # CONFIG_PCIEASPM is not set
+CONFIG_PCI_IOV=y
 CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_S390=y
 CONFIG_UEVENT_HELPER=y
@ -427,7 +434,7 @@ CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_MD_CLUSTER=m
 CONFIG_BCACHE=m
-CONFIG_BLK_DEV_DM=m
+CONFIG_BLK_DEV_DM=y
 CONFIG_DM_UNSTRIPED=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
@ -444,6 +451,7 @@ CONFIG_DM_MULTIPATH_ST=m
 CONFIG_DM_MULTIPATH_HST=m
 CONFIG_DM_MULTIPATH_IOA=m
 CONFIG_DM_DELAY=m
+CONFIG_DM_INIT=y
 CONFIG_DM_UEVENT=y
 CONFIG_DM_FLAKEY=m
 CONFIG_DM_VERITY=m
@ -487,6 +495,7 @@ CONFIG_NLMON=m
 # CONFIG_NET_VENDOR_GOOGLE is not set
 # CONFIG_NET_VENDOR_HUAWEI is not set
 # CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICROSOFT is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 CONFIG_MLX4_EN=m
 CONFIG_MLX5_CORE=m
@ -543,7 +552,6 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_LEGACY_PTY_COUNT=0
 CONFIG_VIRTIO_CONSOLE=m
 CONFIG_HW_RANDOM_VIRTIO=m
-CONFIG_RAW_DRIVER=m
 CONFIG_HANGCHECK_TIMER=m
 CONFIG_TN3270_FS=y
 # CONFIG_PTP_1588_CLOCK is not set
@ -566,7 +574,6 @@ CONFIG_SYNC_FILE=y
 CONFIG_VFIO=m
 CONFIG_VFIO_PCI=m
 CONFIG_VFIO_MDEV=m
-CONFIG_VFIO_MDEV_DEVICE=m
 CONFIG_VIRTIO_PCI=m
 CONFIG_VIRTIO_BALLOON=m
 CONFIG_VIRTIO_INPUT=y
@ -607,6 +614,7 @@ CONFIG_FUSE_FS=y
 CONFIG_CUSE=m
 CONFIG_VIRTIO_FS=m
 CONFIG_OVERLAY_FS=m
+CONFIG_NETFS_STATS=y
 CONFIG_FSCACHE=m
 CONFIG_CACHEFILES=m
 CONFIG_ISO9660_FS=y
@ -642,7 +650,6 @@ CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_V4_SECURITY_LABEL=y
 CONFIG_CIFS=m
-CONFIG_CIFS_STATS2=y
 CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_UPCALL=y
 CONFIG_CIFS_XATTR=y
@ -669,6 +676,7 @@ CONFIG_SECURITY_SELINUX_BOOTPARAM=y
 CONFIG_SECURITY_SELINUX_DISABLE=y
 CONFIG_SECURITY_LOCKDOWN_LSM=y
 CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
+CONFIG_SECURITY_LANDLOCK=y
 CONFIG_INTEGRITY_SIGNATURE=y
 CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
 CONFIG_IMA=y
@ -684,6 +692,7 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
+CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
 CONFIG_CRYPTO_SM2=m
 CONFIG_CRYPTO_CURVE25519=m
@ -754,6 +763,7 @@ CONFIG_CRC8=m
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=0
 CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_INFO_DWARF4=y
 CONFIG_GDB_SCRIPTS=y
@ -781,3 +791,4 @@ CONFIG_LKDTM=m
 CONFIG_PERCPU_TEST=m
 CONFIG_ATOMIC64_SELFTEST=y
 CONFIG_TEST_BPF=m
+CONFIG_TEST_LIVEPATCH=m
--- a/arch/s390/configs/zfcpdump_defconfig
+++ b/arch/s390/configs/zfcpdump_defconfig
@ -29,9 +29,9 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_COMPACTION is not set
 # CONFIG_MIGRATION is not set
-# CONFIG_BOUNCE is not set
 CONFIG_NET=y
 # CONFIG_IUCV is not set
+# CONFIG_PCPU_DEV_REFCNT is not set
 # CONFIG_ETHTOOL_NETLINK is not set
 CONFIG_DEVTMPFS=y
 CONFIG_BLK_DEV_RAM=y
@ -51,7 +51,6 @@ CONFIG_ZFCP=y
 # CONFIG_SERIO is not set
 # CONFIG_HVC_IUCV is not set
 # CONFIG_HW_RANDOM_S390 is not set
-CONFIG_RAW_DRIVER=y
 # CONFIG_HMC_DRV is not set
 # CONFIG_S390_TAPE is not set
 # CONFIG_VMCP is not set
--- a/arch/s390/include/asm/ftrace.h
+++ b/arch/s390/include/asm/ftrace.h
@ -19,6 +19,7 @@ void ftrace_caller(void);

 extern char ftrace_graph_caller_end;
 extern unsigned long ftrace_plt;
+extern void *ftrace_func;

 struct dyn_arch_ftrace { };

--- a/Show More
+++ b/Show More