2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 13:43:55 +08:00

Merge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev

This commit is contained in:
Linus Torvalds 2005-11-18 12:19:12 -08:00
commit d4bf205305
2 changed files with 162 additions and 38 deletions

View File

@ -2,6 +2,7 @@
* sata_mv.c - Marvell SATA support
*
* Copyright 2005: EMC Corporation, all rights reserved.
* Copyright 2005 Red Hat, Inc. All rights reserved.
*
* Please ALWAYS copy linux-ide@vger.kernel.org on emails.
*
@ -36,7 +37,7 @@
#include <asm/io.h>
#define DRV_NAME "sata_mv"
#define DRV_VERSION "0.25"
#define DRV_VERSION "0.5"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */

View File

@ -5,17 +5,6 @@
*
* Based on preview driver from Silicon Image.
*
* NOTE: No NCQ/ATAPI support yet. The preview driver didn't support
* NCQ nor ATAPI, and, unfortunately, I couldn't find out how to make
* those work. Enabling those shouldn't be difficult. Basic
* structure is all there (in libata-dev tree). If you have any
* information about this hardware, please contact me or linux-ide.
* Info is needed on...
*
* - How to issue tagged commands and turn on sactive on issue accordingly.
* - Where to put an ATAPI command and how to tell the device to send it.
* - How to enable/use 64bit.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
@ -42,7 +31,7 @@
#include <asm/io.h>
#define DRV_NAME "sata_sil24"
#define DRV_VERSION "0.22" /* Silicon Image's preview driver was 0.10 */
#define DRV_VERSION "0.23"
/*
* Port request block (PRB) 32 bytes
@ -221,11 +210,22 @@ enum {
IRQ_STAT_4PORTS = 0xf,
};
struct sil24_cmd_block {
struct sil24_ata_block {
struct sil24_prb prb;
struct sil24_sge sge[LIBATA_MAX_PRD];
};
struct sil24_atapi_block {
struct sil24_prb prb;
u8 cdb[16];
struct sil24_sge sge[LIBATA_MAX_PRD - 1];
};
union sil24_cmd_block {
struct sil24_ata_block ata;
struct sil24_atapi_block atapi;
};
/*
* ap->private_data
*
@ -233,7 +233,7 @@ struct sil24_cmd_block {
* here from the previous interrupt.
*/
struct sil24_port_priv {
struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */
union sil24_cmd_block *cmd_block; /* 32 cmd blocks */
dma_addr_t cmd_block_dma; /* DMA base addr for them */
struct ata_taskfile tf; /* Cached taskfile registers */
};
@ -244,6 +244,7 @@ struct sil24_host_priv {
void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */
};
static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev);
static u8 sil24_check_status(struct ata_port *ap);
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
@ -297,6 +298,8 @@ static struct scsi_host_template sil24_sht = {
static const struct ata_port_operations sil24_ops = {
.port_disable = ata_port_disable,
.dev_config = sil24_dev_config,
.check_status = sil24_check_status,
.check_altstatus = sil24_check_status,
.dev_select = ata_noop_dev_select,
@ -333,7 +336,7 @@ static struct ata_port_info sil24_port_info[] = {
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
ATA_FLAG_SRST | ATA_FLAG_MMIO |
ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(4),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@ -344,7 +347,7 @@ static struct ata_port_info sil24_port_info[] = {
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
ATA_FLAG_SRST | ATA_FLAG_MMIO |
ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(2),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@ -355,7 +358,7 @@ static struct ata_port_info sil24_port_info[] = {
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
ATA_FLAG_SRST | ATA_FLAG_MMIO |
ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(1),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@ -364,6 +367,16 @@ static struct ata_port_info sil24_port_info[] = {
},
};
static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev)
{
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
if (ap->cdb_len == 16)
writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
else
writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
}
static inline void sil24_update_tf(struct ata_port *ap)
{
struct sil24_port_priv *pp = ap->private_data;
@ -415,22 +428,73 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
*tf = pp->tf;
}
static int sil24_issue_SRST(struct ata_port *ap)
{
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
struct sil24_port_priv *pp = ap->private_data;
struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
dma_addr_t paddr = pp->cmd_block_dma;
u32 irq_enable, irq_stat;
int cnt;
/* temporarily turn off IRQs during SRST */
irq_enable = readl(port + PORT_IRQ_ENABLE_SET);
writel(irq_enable, port + PORT_IRQ_ENABLE_CLR);
/*
* XXX: Not sure whether the following sleep is needed or not.
* The original driver had it. So....
*/
msleep(10);
prb->ctrl = PRB_CTRL_SRST;
prb->fis[1] = 0; /* no PM yet */
writel((u32)paddr, port + PORT_CMD_ACTIVATE);
for (cnt = 0; cnt < 100; cnt++) {
irq_stat = readl(port + PORT_IRQ_STAT);
writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */
irq_stat >>= PORT_IRQ_RAW_SHIFT;
if (irq_stat & (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR))
break;
msleep(1);
}
/* restore IRQs */
writel(irq_enable, port + PORT_IRQ_ENABLE_SET);
if (!(irq_stat & PORT_IRQ_COMPLETE))
return -1;
/* update TF */
sil24_update_tf(ap);
return 0;
}
static void sil24_phy_reset(struct ata_port *ap)
{
struct sil24_port_priv *pp = ap->private_data;
__sata_phy_reset(ap);
/*
* No ATAPI yet. Just unconditionally indicate ATA device.
* If ATAPI device is attached, it will fail ATA_CMD_ID_ATA
* and libata core will ignore the device.
*/
if (!(ap->flags & ATA_FLAG_PORT_DISABLED))
ap->device[0].class = ATA_DEV_ATA;
if (ap->flags & ATA_FLAG_PORT_DISABLED)
return;
if (sil24_issue_SRST(ap) < 0) {
printk(KERN_ERR DRV_NAME
" ata%u: SRST failed, disabling port\n", ap->id);
ap->ops->port_disable(ap);
return;
}
ap->device->class = ata_dev_classify(&pp->tf);
}
static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
struct sil24_cmd_block *cb)
struct sil24_sge *sge)
{
struct sil24_sge *sge = cb->sge;
struct scatterlist *sg;
unsigned int idx = 0;
@ -451,23 +515,47 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct sil24_port_priv *pp = ap->private_data;
struct sil24_cmd_block *cb = pp->cmd_block + qc->tag;
struct sil24_prb *prb = &cb->prb;
union sil24_cmd_block *cb = pp->cmd_block + qc->tag;
struct sil24_prb *prb;
struct sil24_sge *sge;
switch (qc->tf.protocol) {
case ATA_PROT_PIO:
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
prb = &cb->ata.prb;
sge = cb->ata.sge;
prb->ctrl = 0;
break;
case ATA_PROT_ATAPI:
case ATA_PROT_ATAPI_DMA:
case ATA_PROT_ATAPI_NODATA:
prb = &cb->atapi.prb;
sge = cb->atapi.sge;
memset(cb->atapi.cdb, 0, 32);
memcpy(cb->atapi.cdb, qc->cdb, ap->cdb_len);
if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
if (qc->tf.flags & ATA_TFLAG_WRITE)
prb->ctrl = PRB_CTRL_PACKET_WRITE;
else
prb->ctrl = PRB_CTRL_PACKET_READ;
} else
prb->ctrl = 0;
break;
default:
/* ATAPI isn't supported yet */
prb = NULL; /* shut up, gcc */
sge = NULL;
BUG();
}
ata_tf_to_fis(&qc->tf, prb->fis, 0);
if (qc->flags & ATA_QCFLAG_DMAMAP)
sil24_fill_sg(qc, cb);
sil24_fill_sg(qc, sge);
}
static int sil24_qc_issue(struct ata_queued_cmd *qc)
@ -486,6 +574,31 @@ static void sil24_irq_clear(struct ata_port *ap)
/* unused */
}
static int __sil24_restart_controller(void __iomem *port)
{
u32 tmp;
int cnt;
writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
/* Max ~10ms */
for (cnt = 0; cnt < 10000; cnt++) {
tmp = readl(port + PORT_CTRL_STAT);
if (tmp & PORT_CS_RDY)
return 0;
udelay(1);
}
return -1;
}
static void sil24_restart_controller(struct ata_port *ap)
{
if (__sil24_restart_controller((void __iomem *)ap->ioaddr.cmd_addr))
printk(KERN_ERR DRV_NAME
" ata%u: failed to restart controller\n", ap->id);
}
static int __sil24_reset_controller(void __iomem *port)
{
int cnt;
@ -505,7 +618,11 @@ static int __sil24_reset_controller(void __iomem *port)
if (tmp & PORT_CS_DEV_RST)
return -1;
if (tmp & PORT_CS_RDY)
return 0;
return __sil24_restart_controller(port);
}
static void sil24_reset_controller(struct ata_port *ap)
@ -567,7 +684,13 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
if (serror)
writel(serror, port + PORT_SERROR);
printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n"
/*
* Don't log ATAPI device errors. They're supposed to happen
* and any serious errors will be logged using sense data by
* the SCSI layer.
*/
if (ap->device[0].class != ATA_DEV_ATAPI || cmd_err > PORT_CERR_SDB)
printk("ata%u: error interrupt on port%d\n"
" stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
@ -577,6 +700,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
*/
sil24_update_tf(ap);
err_mask = ac_err_mask(pp->tf.command);
sil24_restart_controller(ap);
} else {
/*
* Other errors. libata currently doesn't have any
@ -584,12 +708,11 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
* ATA_ERR.
*/
err_mask = AC_ERR_OTHER;
sil24_reset_controller(ap);
}
if (qc)
ata_qc_complete(qc, err_mask);
sil24_reset_controller(ap);
}
static inline void sil24_host_intr(struct ata_port *ap)
@ -665,7 +788,7 @@ static int sil24_port_start(struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
struct sil24_port_priv *pp;
struct sil24_cmd_block *cb;
union sil24_cmd_block *cb;
size_t cb_size = sizeof(*cb);
dma_addr_t cb_dma;
int rc = -ENOMEM;