Merge branch 'phy-25g'

Maxime Chevallier says:

====================
net: phy: Add 2.5G/5GBASET PHYs support

The 802.3bz standard defines 2 modes based on the NBASET alliance work
that allow to use 2.5Gbps and 5Gbps speeds on Cat 5e, 6 and 7 cables.

This series adds the necessary infrastructure to handle these modes with
C45 PHYs. This series was originally part of a bigger one, that has
seen 2 iterations [1] [2] that added support for these modes on Marvell
Alaska PHYs.

Following some discussions with Heiner and Andrew [3], we decided to
split-out the generic parts so that we can work together on the
following steps to get these mode fully working with Aquantia and
Marvell PHYS.

The first 3 patches are reworking some of the internal network phy
infrastructure to handle the new modes in a more generic way.

The 4th patch adds all the C45 register definition and accesses that
follows the 802.3bz standard to support 2.5GBASET and 5GBASET.

[1] : https://lore.kernel.org/netdev/20190118152352.26417-1-maxime.chevallier@bootlin.com/
[2] : https://lore.kernel.org/netdev/20190207094939.27369-1-maxime.chevallier@bootlin.com/
[3] : https://lore.kernel.org/netdev/81c340ea-54b0-1abf-94af-b8dc4ee83e3a@gmail.com/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/marvell10g.c

@@ -233,8 +233,7 @@ static int mv3310_resume(struct phy_device *phydev)
 
 static int mv3310_config_init(struct phy_device *phydev)
 {
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
+	int ret, val;
-	int val;
 
 	/* Check that the PHY interface type is compatible */
 	if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
@@ -243,8 +242,8 @@ static int mv3310_config_init(struct phy_device *phydev)
 	    phydev->interface != PHY_INTERFACE_MODE_10GKR)
 		return -ENODEV;
 
-	__set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported);
+	__set_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported);
-	__set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, supported);
+	__set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported);
 
 	if (phydev->c45_ids.devices_in_package & MDIO_DEVS_AN) {
 		val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
@@ -252,74 +251,13 @@ static int mv3310_config_init(struct phy_device *phydev)
 			return val;
 
 		if (val & MDIO_AN_STAT1_ABLE)
-			__set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, supported);
+			__set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+				  phydev->supported);
 	}
 
-	val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT2);
+	ret = genphy_c45_pma_read_abilities(phydev);
-	if (val < 0)
+	if (ret)
-		return val;
+		return ret;
-
-	/* Ethtool does not support the WAN mode bits */
-	if (val & (MDIO_PMA_STAT2_10GBSR | MDIO_PMA_STAT2_10GBLR |
-		   MDIO_PMA_STAT2_10GBER | MDIO_PMA_STAT2_10GBLX4 |
-		   MDIO_PMA_STAT2_10GBSW | MDIO_PMA_STAT2_10GBLW |
-		   MDIO_PMA_STAT2_10GBEW))
-		__set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, supported);
-	if (val & MDIO_PMA_STAT2_10GBSR)
-		__set_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT, supported);
-	if (val & MDIO_PMA_STAT2_10GBLR)
-		__set_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT, supported);
-	if (val & MDIO_PMA_STAT2_10GBER)
-		__set_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT, supported);
-
-	if (val & MDIO_PMA_STAT2_EXTABLE) {
-		val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE);
-		if (val < 0)
-			return val;
-
-		if (val & (MDIO_PMA_EXTABLE_10GBT | MDIO_PMA_EXTABLE_1000BT |
-			   MDIO_PMA_EXTABLE_100BTX | MDIO_PMA_EXTABLE_10BT))
-			__set_bit(ETHTOOL_LINK_MODE_TP_BIT, supported);
-		if (val & MDIO_PMA_EXTABLE_10GBLRM)
-			__set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, supported);
-		if (val & (MDIO_PMA_EXTABLE_10GBKX4 | MDIO_PMA_EXTABLE_10GBKR |
-			   MDIO_PMA_EXTABLE_1000BKX))
-			__set_bit(ETHTOOL_LINK_MODE_Backplane_BIT, supported);
-		if (val & MDIO_PMA_EXTABLE_10GBLRM)
-			__set_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_10GBT)
-			__set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_10GBKX4)
-			__set_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_10GBKR)
-			__set_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_1000BT)
-			__set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_1000BKX)
-			__set_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_100BTX) {
-			__set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
-				  supported);
-			__set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
-				  supported);
-		}
-		if (val & MDIO_PMA_EXTABLE_10BT) {
-			__set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
-				  supported);
-			__set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
-				  supported);
-		}
-	}
-
-	linkmode_copy(phydev->supported, supported);
-	linkmode_and(phydev->advertising, phydev->advertising,
-		     phydev->supported);
 
 	return 0;
 }

drivers/net/phy/phy-c45.c

@@ -47,6 +47,16 @@ int genphy_c45_pma_setup_forced(struct phy_device *phydev)
 		/* Assume 1000base-T */
 		ctrl2 |= MDIO_PMA_CTRL2_1000BT;
 		break;
+	case SPEED_2500:
+		ctrl1 |= MDIO_CTRL1_SPEED2_5G;
+		/* Assume 2.5Gbase-T */
+		ctrl2 |= MDIO_PMA_CTRL2_2_5GBT;
+		break;
+	case SPEED_5000:
+		ctrl1 |= MDIO_CTRL1_SPEED5G;
+		/* Assume 5Gbase-T */
+		ctrl2 |= MDIO_PMA_CTRL2_5GBT;
+		break;
 	case SPEED_10000:
 		ctrl1 |= MDIO_CTRL1_SPEED10G;
 		/* Assume 10Gbase-T */
@@ -194,6 +204,12 @@ int genphy_c45_read_lpa(struct phy_device *phydev)
 	if (val < 0)
 		return val;
 
+	if (val & MDIO_AN_10GBT_STAT_LP2_5G)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+				 phydev->lp_advertising);
+	if (val & MDIO_AN_10GBT_STAT_LP5G)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+				 phydev->lp_advertising);
 	if (val & MDIO_AN_10GBT_STAT_LP10G)
 		linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
 				 phydev->lp_advertising);
@@ -224,6 +240,12 @@ int genphy_c45_read_pma(struct phy_device *phydev)
 	case MDIO_PMA_CTRL1_SPEED1000:
 		phydev->speed = SPEED_1000;
 		break;
+	case MDIO_CTRL1_SPEED2_5G:
+		phydev->speed = SPEED_2500;
+		break;
+	case MDIO_CTRL1_SPEED5G:
+		phydev->speed = SPEED_5000;
+		break;
 	case MDIO_CTRL1_SPEED10G:
 		phydev->speed = SPEED_10000;
 		break;
@@ -271,6 +293,95 @@ int genphy_c45_read_mdix(struct phy_device *phydev)
 }
 EXPORT_SYMBOL_GPL(genphy_c45_read_mdix);
 
+/**
+ * genphy_c45_pma_read_abilities - read supported link modes from PMA
+ * @phydev: target phy_device struct
+ *
+ * Read the supported link modes from the PMA Status 2 (1.8) register. If bit
+ * 1.8.9 is set, the list of supported modes is build using the values in the
+ * PMA Extended Abilities (1.11) register, indicating 1000BASET an 10G related
+ * modes. If bit 1.11.14 is set, then the list is also extended with the modes
+ * in the 2.5G/5G PMA Extended register (1.21), indicating if 2.5GBASET and
+ * 5GBASET are supported.
+ */
+int genphy_c45_pma_read_abilities(struct phy_device *phydev)
+{
+	int val;
+
+	val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT2);
+	if (val < 0)
+		return val;
+
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT,
+			 phydev->supported,
+			 val & MDIO_PMA_STAT2_10GBSR);
+
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT,
+			 phydev->supported,
+			 val & MDIO_PMA_STAT2_10GBLR);
+
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT,
+			 phydev->supported,
+			 val & MDIO_PMA_STAT2_10GBER);
+
+	if (val & MDIO_PMA_STAT2_EXTABLE) {
+		val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE);
+		if (val < 0)
+			return val;
+
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10GBLRM);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10GBT);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10GBKX4);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10GBKR);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_1000BT);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_1000BKX);
+
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_100BTX);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_100BTX);
+
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10BT);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10BT);
+
+		if (val & MDIO_PMA_EXTABLE_NBT) {
+			val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD,
+					   MDIO_PMA_NG_EXTABLE);
+			if (val < 0)
+				return val;
+
+			linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+					 phydev->supported,
+					 val & MDIO_PMA_NG_EXTABLE_2_5GBT);
+
+			linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+					 phydev->supported,
+					 val & MDIO_PMA_NG_EXTABLE_5GBT);
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(genphy_c45_pma_read_abilities);
+
 /* The gen10g_* functions are the old Clause 45 stub */
 
 int gen10g_config_aneg(struct phy_device *phydev)

drivers/net/phy/phy-core.c

@@ -4,6 +4,7 @@
  */
 #include <linux/export.h>
 #include <linux/phy.h>
+#include <linux/of.h>
 
 const char *phy_speed_to_str(int speed)
 {
@@ -338,6 +339,77 @@ size_t phy_speeds(unsigned int *speeds, size_t size,
 	return count;
 }
 
+static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
+{
+	const struct phy_setting *p;
+	int i;
+
+	for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) {
+		if (p->speed > max_speed)
+			linkmode_clear_bit(p->bit, phydev->supported);
+		else
+			break;
+	}
+
+	return 0;
+}
+
+int phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
+{
+	int err;
+
+	err = __set_phy_supported(phydev, max_speed);
+	if (err)
+		return err;
+
+	linkmode_copy(phydev->advertising, phydev->supported);
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_set_max_speed);
+
+void of_set_phy_supported(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	u32 max_speed;
+
+	if (!IS_ENABLED(CONFIG_OF_MDIO))
+		return;
+
+	if (!node)
+		return;
+
+	if (!of_property_read_u32(node, "max-speed", &max_speed))
+		__set_phy_supported(phydev, max_speed);
+}
+
+void of_set_phy_eee_broken(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	u32 broken = 0;
+
+	if (!IS_ENABLED(CONFIG_OF_MDIO))
+		return;
+
+	if (!node)
+		return;
+
+	if (of_property_read_bool(node, "eee-broken-100tx"))
+		broken |= MDIO_EEE_100TX;
+	if (of_property_read_bool(node, "eee-broken-1000t"))
+		broken |= MDIO_EEE_1000T;
+	if (of_property_read_bool(node, "eee-broken-10gt"))
+		broken |= MDIO_EEE_10GT;
+	if (of_property_read_bool(node, "eee-broken-1000kx"))
+		broken |= MDIO_EEE_1000KX;
+	if (of_property_read_bool(node, "eee-broken-10gkx4"))
+		broken |= MDIO_EEE_10GKX4;
+	if (of_property_read_bool(node, "eee-broken-10gkr"))
+		broken |= MDIO_EEE_10GKR;
+
+	phydev->eee_broken_modes = broken;
+}
+
 /**
  * phy_resolve_aneg_linkmode - resolve the advertisements into phy settings
  * @phydev: The phy_device struct

drivers/net/phy/phy_device.c

@@ -30,7 +30,6 @@
 #include <linux/mdio.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
-#include <linux/of.h>
 
 MODULE_DESCRIPTION("PHY library");
 MODULE_AUTHOR("Andy Fleming");
@@ -1949,44 +1948,6 @@ int genphy_loopback(struct phy_device *phydev, bool enable)
 }
 EXPORT_SYMBOL(genphy_loopback);
 
-static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
-{
-	switch (max_speed) {
-	case SPEED_10:
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
-				   phydev->supported);
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
-				   phydev->supported);
-		/* fall through */
-	case SPEED_100:
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
-				   phydev->supported);
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
-				   phydev->supported);
-		break;
-	case SPEED_1000:
-		break;
-	default:
-		return -ENOTSUPP;
-	}
-
-	return 0;
-}
-
-int phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
-{
-	int err;
-
-	err = __set_phy_supported(phydev, max_speed);
-	if (err)
-		return err;
-
-	linkmode_copy(phydev->advertising, phydev->supported);
-
-	return 0;
-}
-EXPORT_SYMBOL(phy_set_max_speed);
-
 /**
  * phy_remove_link_mode - Remove a supported link mode
  * @phydev: phy_device structure to remove link mode from
@@ -2117,48 +2078,6 @@ bool phy_validate_pause(struct phy_device *phydev,
 }
 EXPORT_SYMBOL(phy_validate_pause);
 
-static void of_set_phy_supported(struct phy_device *phydev)
-{
-	struct device_node *node = phydev->mdio.dev.of_node;
-	u32 max_speed;
-
-	if (!IS_ENABLED(CONFIG_OF_MDIO))
-		return;
-
-	if (!node)
-		return;
-
-	if (!of_property_read_u32(node, "max-speed", &max_speed))
-		__set_phy_supported(phydev, max_speed);
-}
-
-static void of_set_phy_eee_broken(struct phy_device *phydev)
-{
-	struct device_node *node = phydev->mdio.dev.of_node;
-	u32 broken = 0;
-
-	if (!IS_ENABLED(CONFIG_OF_MDIO))
-		return;
-
-	if (!node)
-		return;
-
-	if (of_property_read_bool(node, "eee-broken-100tx"))
-		broken |= MDIO_EEE_100TX;
-	if (of_property_read_bool(node, "eee-broken-1000t"))
-		broken |= MDIO_EEE_1000T;
-	if (of_property_read_bool(node, "eee-broken-10gt"))
-		broken |= MDIO_EEE_10GT;
-	if (of_property_read_bool(node, "eee-broken-1000kx"))
-		broken |= MDIO_EEE_1000KX;
-	if (of_property_read_bool(node, "eee-broken-10gkx4"))
-		broken |= MDIO_EEE_10GKX4;
-	if (of_property_read_bool(node, "eee-broken-10gkr"))
-		broken |= MDIO_EEE_10GKR;
-
-	phydev->eee_broken_modes = broken;
-}
-
 static bool phy_drv_supports_irq(struct phy_driver *phydrv)
 {
 	return phydrv->config_intr && phydrv->ack_interrupt;

include/linux/phy.h

@@ -673,6 +673,8 @@ phy_lookup_setting(int speed, int duplex, const unsigned long *mask,
 		   bool exact);
 size_t phy_speeds(unsigned int *speeds, size_t size,
 		  unsigned long *mask);
+void of_set_phy_supported(struct phy_device *phydev);
+void of_set_phy_eee_broken(struct phy_device *phydev);
 
 static inline bool __phy_is_started(struct phy_device *phydev)
 {
@@ -1114,6 +1116,7 @@ int genphy_c45_read_pma(struct phy_device *phydev);
 int genphy_c45_pma_setup_forced(struct phy_device *phydev);
 int genphy_c45_an_disable_aneg(struct phy_device *phydev);
 int genphy_c45_read_mdix(struct phy_device *phydev);
+int genphy_c45_pma_read_abilities(struct phy_device *phydev);
 
 /* The gen10g_* functions are the old Clause 45 stub */
 int gen10g_config_aneg(struct phy_device *phydev);

include/uapi/linux/mdio.h

@@ -45,6 +45,7 @@
 #define MDIO_AN_ADVERTISE	16	/* AN advertising (base page) */
 #define MDIO_AN_LPA		19	/* AN LP abilities (base page) */
 #define MDIO_PCS_EEE_ABLE	20	/* EEE Capability register */
+#define MDIO_PMA_NG_EXTABLE	21	/* 2.5G/5G PMA/PMD extended ability */
 #define MDIO_PCS_EEE_WK_ERR	22	/* EEE wake error counter */
 #define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
 #define MDIO_AN_EEE_ADV		60	/* EEE advertisement */
@@ -92,6 +93,10 @@
 #define MDIO_CTRL1_SPEED10G		(MDIO_CTRL1_SPEEDSELEXT | 0x00)
 /* 10PASS-TS/2BASE-TL */
 #define MDIO_CTRL1_SPEED10P2B		(MDIO_CTRL1_SPEEDSELEXT | 0x04)
+/* 2.5 Gb/s */
+#define MDIO_CTRL1_SPEED2_5G		(MDIO_CTRL1_SPEEDSELEXT | 0x18)
+/* 5 Gb/s */
+#define MDIO_CTRL1_SPEED5G		(MDIO_CTRL1_SPEEDSELEXT | 0x1c)
 
 /* Status register 1. */
 #define MDIO_STAT1_LPOWERABLE		0x0002	/* Low-power ability */
@@ -145,6 +150,8 @@
 #define MDIO_PMA_CTRL2_1000BKX		0x000d	/* 1000BASE-KX type */
 #define MDIO_PMA_CTRL2_100BTX		0x000e	/* 100BASE-TX type */
 #define MDIO_PMA_CTRL2_10BT		0x000f	/* 10BASE-T type */
+#define MDIO_PMA_CTRL2_2_5GBT		0x0030  /* 2.5GBaseT type */
+#define MDIO_PMA_CTRL2_5GBT		0x0031  /* 5GBaseT type */
 #define MDIO_PCS_CTRL2_TYPE		0x0003	/* PCS type selection */
 #define MDIO_PCS_CTRL2_10GBR		0x0000	/* 10GBASE-R type */
 #define MDIO_PCS_CTRL2_10GBX		0x0001	/* 10GBASE-X type */
@@ -198,6 +205,7 @@
 #define MDIO_PMA_EXTABLE_1000BKX	0x0040	/* 1000BASE-KX ability */
 #define MDIO_PMA_EXTABLE_100BTX		0x0080	/* 100BASE-TX ability */
 #define MDIO_PMA_EXTABLE_10BT		0x0100	/* 10BASE-T ability */
+#define MDIO_PMA_EXTABLE_NBT		0x4000  /* 2.5/5GBASE-T ability */
 
 /* PHY XGXS lane state register. */
 #define MDIO_PHYXS_LNSTAT_SYNC0		0x0001
@@ -234,9 +242,13 @@
 #define MDIO_PCS_10GBRT_STAT2_BER	0x3f00
 
 /* AN 10GBASE-T control register. */
+#define MDIO_AN_10GBT_CTRL_ADV2_5G	0x0080	/* Advertise 2.5GBASE-T */
+#define MDIO_AN_10GBT_CTRL_ADV5G	0x0100	/* Advertise 5GBASE-T */
 #define MDIO_AN_10GBT_CTRL_ADV10G	0x1000	/* Advertise 10GBASE-T */
 
 /* AN 10GBASE-T status register. */
+#define MDIO_AN_10GBT_STAT_LP2_5G	0x0020  /* LP is 2.5GBT capable */
+#define MDIO_AN_10GBT_STAT_LP5G		0x0040  /* LP is 5GBT capable */
 #define MDIO_AN_10GBT_STAT_LPTRR	0x0200	/* LP training reset req. */
 #define MDIO_AN_10GBT_STAT_LPLTABLE	0x0400	/* LP loop timing ability */
 #define MDIO_AN_10GBT_STAT_LP10G	0x0800	/* LP is 10GBT capable */
@@ -265,6 +277,10 @@
 #define MDIO_EEE_10GKX4		0x0020	/* 10G KX4 EEE cap */
 #define MDIO_EEE_10GKR		0x0040	/* 10G KR EEE cap */
 
+/* 2.5G/5G Extended abilities register. */
+#define MDIO_PMA_NG_EXTABLE_2_5GBT	0x0001	/* 2.5GBASET ability */
+#define MDIO_PMA_NG_EXTABLE_5GBT	0x0002	/* 5GBASET ability */
+
 /* LASI RX_ALARM control/status registers. */
 #define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
 #define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */