renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-19 18:53:52 +08:00
Code

ARM: shmobile: armadillo800eva: USB Func enables external IRQ mode

Browse Source 
We can control renesas_usbhs driver as 2 way which are
autonomy mode and external IRQ trigger mode.

Autonomy mode is very easy settings for platform,
but it required USB power domain always ON,
since its connection/disconnection IRQ come from it.

If platform uses external IRQ trigger mode,
USB power domain can be OFF, since its
connection/disconnection IRQ come from external IRQ.

This patch enable external IRQ mode.
Now it is possible to add USB support on A4SP domain.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This commit is contained in:
Kuninori Morimoto 2012-07-05 01:27:14 -07:00 committed by Rafael J. Wysocki
parent 93bcfdc565
commit d483b983a5
1 changed files with 38 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

46
arch/arm/mach-shmobile/board-armadillo800eva.c
View File

@ -133,14 +133,8 @@
* These are a little bit complex.
* see
* usbhsf_power_ctrl()
*
* CAUTION
*
* It uses autonomy mode for USB hotplug at this point
* (= usbhs_private.platform_callback.get_vbus is NULL),
* since we don't know what's happen on PM control
* on this workaround.
*/
#define IRQ7 evt2irq(0x02e0)
#define USBCR1 0xe605810a
#define USBH 0xC6700000
#define USBH_USBCTR 0x10834
@ -220,6 +214,20 @@ static void usbhsf_power_ctrl(struct platform_device *pdev,
}
}
static int usbhsf_get_vbus(struct platform_device *pdev)
{
return gpio_get_value(GPIO_PORT209);
}
static irqreturn_t usbhsf_interrupt(int irq, void *data)
{
struct platform_device *pdev = data;
renesas_usbhs_call_notify_hotplug(pdev);
return IRQ_HANDLED;
}
static void usbhsf_hardware_exit(struct platform_device *pdev)
{
struct usbhsf_private *priv = usbhsf_get_priv(pdev);
@ -243,11 +251,14 @@ static void usbhsf_hardware_exit(struct platform_device *pdev)
priv->host = NULL;
priv->func = NULL;
priv->usbh_base = NULL;
free_irq(IRQ7, pdev);
}
static int usbhsf_hardware_init(struct platform_device *pdev)
{
struct usbhsf_private *priv = usbhsf_get_priv(pdev);
int ret;
priv->phy = clk_get(&pdev->dev, "phy");
priv->usb24 = clk_get(&pdev->dev, "usb24");
@ -267,6 +278,14 @@ static int usbhsf_hardware_init(struct platform_device *pdev)
return -EIO;
}
ret = request_irq(IRQ7, usbhsf_interrupt, IRQF_TRIGGER_NONE,
dev_name(&pdev->dev), pdev);
if (ret) {
dev_err(&pdev->dev, "request_irq err\n");
return ret;
}
irq_set_irq_type(IRQ7, IRQ_TYPE_EDGE_BOTH);
/* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */
clk_set_rate(priv->usb24,
clk_get_rate(clk_get_parent(priv->usb24)));
@ -278,6 +297,7 @@ static struct usbhsf_private usbhsf_private = {
.info = {
.platform_callback = {
.get_id = usbhsf_get_id,
.get_vbus = usbhsf_get_vbus,
.hardware_init = usbhsf_hardware_init,
.hardware_exit = usbhsf_hardware_exit,
.power_ctrl = usbhsf_power_ctrl,
@ -1018,7 +1038,17 @@ static void __init eva_init(void)
/* USB Host */
} else {
/* USB Func */
gpio_request(GPIO_FN_VBUS, NULL);
/*
* A1 chip has 2 IRQ7 pin and it was controled by MSEL register.
* OTOH, usbhs interrupt needs its value (HI/LOW) to decide
* USB connection/disconnection (usbhsf_get_vbus()).
* This means we needs to select GPIO_FN_IRQ7_PORT209 first,
* and select GPIO_PORT209 here
*/
gpio_request(GPIO_FN_IRQ7_PORT209, NULL);
gpio_request(GPIO_PORT209, NULL);
gpio_direction_input(GPIO_PORT209);
platform_device_register(&usbhsf_device);
}