renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-11 14:53:56 +08:00
Code

gpio updates for v5.16

Browse Source 
- new driver: gpio-modepin (plus relevant change in zynqmp firmware)
 - add interrupt support to gpio-virtio
 - enable the 'gpio-line-names' property in the DT bindings for gpio-rockchip
 - use the subsystem helpers where applicable in gpio-uniphier instead of
   accessing IRQ structures directly
 - code shrink in gpio-xilinx
 - add interrupt to gpio-mlxbf2 (and include the removal of custom interrupt
   code from the mellanox ethernet driver)
 - support multiple interrupts per bank in gpio-tegra186 (and force one interrupt
   per bank in older models)
 - fix GPIO line IRQ offset calculation in gpio-realtek-otto
 - drop unneeded MODULE_ALIAS expansions in multiple drivers
 - code cleanup in gpio-aggregator
 - minor improvements in gpio-max730x and gpio-mc33880
 - Kconfig cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmGJH+MACgkQEacuoBRx
 13JjGg//YKoAby35hcclft5xJYDwnx2or001TJ+nFLOQ9d24gUI7+UMFVnZ2ifMP
 9F/yO0934pkHNUqcTuIMbeALW6Cg2DglXJFCQSXT6Ng5ETjENOhLHRa4bRdoIEim
 HC+YJg/DS6CpSkMAH09ljZfkTPz3B2DHt+Y4phIDg2PIrt+UUsN/RC685B4jSwds
 pcAwdP1mqBV1da8uRjtfc7UcFSxR6/lvBBWQSo9RAEse5R6Rmm7XIOKBlQ+Exdts
 jAmVqxz7BnfuYug9Y3y3fOiAQYoRvZBaSjkeMJALub3GEd3W30vAKoQhq7gC9ea3
 XvCj7V6C59JVp9aQUXo1cL6VqcesSGMWoRi2vll8/7gluXV2gCoNPVb+9KwxG9Ed
 +xwXBpCsOVQCXl8jgIHBWNfxOS31wafWlK8Ng42Cjov+uQfsccgufTvhQXBumKbM
 oECSOgjg9k3/AMpym3buOgAzqSec5R1iiSWHNPT+P6cSFXa2Bl3A8X0RgF/TwXPC
 Bn9BDfSiYfOcD6y6yx2GPMCrCXNJRWgfJ/2j3Jsb66XtGwtBDhmK7rcqcg9qIws9
 mWWyISiJgO0gfk24hIIw7OxeKCidm3iVskryJAQUfTX+BBcR5nZfiuF3EeDXZv95
 whkSoN7J5fmMYDDJ7wd0pFwbW5fe5C/i/2tjOlNBgdXsNgAv/r4=
 =mKh0
 -----END PGP SIGNATURE-----

Merge tag 'gpio-updates-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
 "We have a single new driver, new features in others and some cleanups
  all over the place.

  Nothing really stands out and it is all relatively small.

   - new driver: gpio-modepin (plus relevant change in zynqmp firmware)

   - add interrupt support to gpio-virtio

   - enable the 'gpio-line-names' property in the DT bindings for
     gpio-rockchip

   - use the subsystem helpers where applicable in gpio-uniphier instead
     of accessing IRQ structures directly

   - code shrink in gpio-xilinx

   - add interrupt to gpio-mlxbf2 (and include the removal of custom
     interrupt code from the mellanox ethernet driver)

   - support multiple interrupts per bank in gpio-tegra186 (and force
     one interrupt per bank in older models)

   - fix GPIO line IRQ offset calculation in gpio-realtek-otto

   - drop unneeded MODULE_ALIAS expansions in multiple drivers

   - code cleanup in gpio-aggregator

   - minor improvements in gpio-max730x and gpio-mc33880

   - Kconfig cleanups"

* tag 'gpio-updates-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  virtio_gpio: drop packed attribute
  gpio: virtio: Add IRQ support
  gpio: realtek-otto: fix GPIO line IRQ offset
  gpio: clean up Kconfig file
  net: mellanox: mlxbf_gige: Replace non-standard interrupt handling
  gpio: mlxbf2: Introduce IRQ support
  gpio: mc33880: Drop if with an always false condition
  gpio: max730x: Make __max730x_remove() return void
  gpio: aggregator: Wrap access to gpiochip_fwd.tmp[]
  gpio: modepin: Add driver support for modepin GPIO controller
  dt-bindings: gpio: zynqmp: Add binding documentation for modepin
  firmware: zynqmp: Add MMIO read and write support for PS_MODE pin
  gpio: tps65218: drop unneeded MODULE_ALIAS
  gpio: max77620: drop unneeded MODULE_ALIAS
  gpio: xilinx: simplify getting .driver_data
  gpio: tegra186: Support multiple interrupts per bank
  gpio: tegra186: Force one interrupt per bank
  gpio: uniphier: Use helper functions to get private data from IRQ data
  gpio: uniphier: Use helper function to get IRQ hardware number
  dt-bindings: gpio: add gpio-line-names to rockchip,gpio-bank.yaml
This commit is contained in:
Linus Torvalds 2021-11-08 11:55:21 -08:00
commit d20f7a09e5
26 changed files with 943 additions and 351 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
View File

@ -29,6 +29,8 @@ properties:
gpio-controller: true
gpio-line-names: true
"#gpio-cells":
const: 2

43
Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml Normal file
View File

@ -0,0 +1,43 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: "http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: ZynqMP Mode Pin GPIO controller
description:
PS_MODE is 4-bits boot mode pins sampled on POR deassertion. Mode Pin
GPIO controller with configurable from numbers of pins (from 0 to 3 per
PS_MODE). Every pin can be configured as input/output.
maintainers:
- Piyush Mehta <piyush.mehta@xilinx.com>
properties:
compatible:
const: xlnx,zynqmp-gpio-modepin
gpio-controller: true
"#gpio-cells":
const: 2
required:
- compatible
- gpio-controller
- "#gpio-cells"
additionalProperties: false
examples:
- |
zynqmp-firmware {
gpio {
compatible = "xlnx,zynqmp-gpio-modepin";
gpio-controller;
#gpio-cells = <2>;
};
};
...

46
drivers/firmware/xilinx/zynqmp.c
View File

@ -28,6 +28,13 @@
/* Max HashMap Order for PM API feature check (1<<7 = 128) */
#define PM_API_FEATURE_CHECK_MAX_ORDER 7
/* CRL registers and bitfields */
#define CRL_APB_BASE 0xFF5E0000U
/* BOOT_PIN_CTRL- Used to control the mode pins after boot */
#define CRL_APB_BOOT_PIN_CTRL (CRL_APB_BASE + (0x250U))
/* BOOT_PIN_CTRL_MASK- out_val[11:8], out_en[3:0] */
#define CRL_APB_BOOTPIN_CTRL_MASK 0xF0FU
static bool feature_check_enabled;
static DEFINE_HASHTABLE(pm_api_features_map, PM_API_FEATURE_CHECK_MAX_ORDER);
@ -942,6 +949,45 @@ int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param,
}
EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_set_config);
/**
* zynqmp_pm_bootmode_read() - PM Config API for read bootpin status
* @ps_mode: Returned output value of ps_mode
*
* This API function is to be used for notify the power management controller
* to read bootpin status.
*
* Return: status, either success or error+reason
*/
unsigned int zynqmp_pm_bootmode_read(u32 *ps_mode)
{
unsigned int ret;
u32 ret_payload[PAYLOAD_ARG_CNT];
ret = zynqmp_pm_invoke_fn(PM_MMIO_READ, CRL_APB_BOOT_PIN_CTRL, 0,
0, 0, ret_payload);
*ps_mode = ret_payload[1];
return ret;
}
EXPORT_SYMBOL_GPL(zynqmp_pm_bootmode_read);
/**
* zynqmp_pm_bootmode_write() - PM Config API for Configure bootpin
* @ps_mode: Value to be written to the bootpin ctrl register
*
* This API function is to be used for notify the power management controller
* to configure bootpin.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_bootmode_write(u32 ps_mode)
{
return zynqmp_pm_invoke_fn(PM_MMIO_WRITE, CRL_APB_BOOT_PIN_CTRL,
CRL_APB_BOOTPIN_CTRL_MASK, ps_mode, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_bootmode_write);
/**
* zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
* master has initialized its own power management

123
drivers/gpio/Kconfig
View File

@ -15,7 +15,7 @@ menuconfig GPIOLIB
bool "GPIO Support"
help
This enables GPIO support through the generic GPIO library.
You only need to enable this, if you also want to enable
You only need to enable this if you also want to enable
one or more of the GPIO drivers below.
If unsure, say N.
@ -140,8 +140,8 @@ config GPIO_AMDPT
depends on ACPI
select GPIO_GENERIC
help
driver for GPIO functionality on Promontory IOHub
Require ACPI ASL code to enumerate as a platform device.
Driver for GPIO functionality on Promontory IOHub.
Requires ACPI ASL code to enumerate as a platform device.
config GPIO_ASPEED
tristate "Aspeed GPIO support"
@ -306,7 +306,7 @@ config GPIO_HISI
help
Say Y or M here to build support for the HiSilicon GPIO controller
driver GPIO block.
This GPIO controller support double-edge interrupt and multi-core
This GPIO controller supports double-edge interrupt and multi-core
concurrent access.
config GPIO_HLWD
@ -326,7 +326,7 @@ config GPIO_ICH
help
Say yes here to support the GPIO functionality of a number of Intel
ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8
ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg
ICH9, ICH10, Series 5/3400 (e.g. Ibex Peak), Series 6/C200 (e.g.
Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake).
If unsure, say N.
@ -337,7 +337,7 @@ config GPIO_IOP
select GPIO_GENERIC
help
Say yes here to support the GPIO functionality of a number of Intel
IOP32X or IOP33X.
IOP32X or IOP33X series of chips.
If unsure, say N.
@ -364,7 +364,7 @@ config GPIO_LOONGSON
bool "Loongson-2/3 GPIO support"
depends on CPU_LOONGSON2EF || CPU_LOONGSON64
help
driver for GPIO functionality on Loongson-2F/3A/3B processors.
Driver for GPIO functionality on Loongson-2F/3A/3B processors.
config GPIO_LPC18XX
tristate "NXP LPC18XX/43XX GPIO support"
@ -392,15 +392,15 @@ config GPIO_MENZ127
depends on MCB
select GPIO_GENERIC
help
Say yes here to support the MEN 16Z127 GPIO Controller
Say yes here to support the MEN 16Z127 GPIO Controller.
config GPIO_MM_LANTIQ
bool "Lantiq Memory mapped GPIOs"
depends on LANTIQ && SOC_XWAY
help
This enables support for memory mapped GPIOs on the External Bus Unit
(EBU) found on Lantiq SoCs. The gpios are output only as they are
created by attaching a 16bit latch to the bus.
(EBU) found on Lantiq SoCs. The GPIOs are output only as they are
created by attaching a 16-bit latch to the bus.
config GPIO_MPC5200
def_bool y
@ -424,7 +424,7 @@ config GPIO_MT7621
select GPIO_GENERIC
select GPIOLIB_IRQCHIP
help
Say yes here to support the Mediatek MT7621 SoC GPIO device
Say yes here to support the Mediatek MT7621 SoC GPIO device.
config GPIO_MVEBU
def_bool y
@ -469,7 +469,7 @@ config GPIO_PL061
select IRQ_DOMAIN
select GPIOLIB_IRQCHIP
help
Say yes here to support the PrimeCell PL061 GPIO device
Say yes here to support the PrimeCell PL061 GPIO device.
config GPIO_PMIC_EIC_SPRD
tristate "Spreadtrum PMIC EIC support"
@ -483,7 +483,7 @@ config GPIO_PXA
bool "PXA GPIO support"
depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
help
Say yes here to support the PXA GPIO device
Say yes here to support the PXA GPIO device.
config GPIO_RCAR
tristate "Renesas R-Car and RZ/G GPIO support"
@ -573,7 +573,7 @@ config GPIO_SPEAR_SPICS
depends on PLAT_SPEAR
select GENERIC_IRQ_CHIP
help
Say yes here to support ST SPEAr SPI Chip Select as GPIO device
Say yes here to support ST SPEAr SPI Chip Select as GPIO device.
config GPIO_SPRD
tristate "Spreadtrum GPIO support"
@ -598,8 +598,8 @@ config GPIO_STP_XWAY
help
This enables support for the Serial To Parallel (STP) unit found on
XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
that can be up to 24 bit. This peripheral is aimed at driving leds.
Some of the gpios/leds can be auto updated by the soc with dsl and
that can be up to 24 bits. This peripheral is aimed at driving LEDs.
Some of the GPIOs/LEDs can be auto updated by the SoC with DSL and
phy status.
config GPIO_SYSCON
@ -679,10 +679,10 @@ config GPIO_VISCONTI
Say yes here to support GPIO on Tohisba Visconti.
config GPIO_VR41XX
tristate "NEC VR4100 series General-purpose I/O Uint support"
tristate "NEC VR4100 series General-purpose I/O Unit support"
depends on CPU_VR41XX
help
Say yes here to support the NEC VR4100 series General-purpose I/O Uint
Say yes here to support the NEC VR4100 series General-purpose I/O Unit.
config GPIO_VX855
tristate "VIA VX855/VX875 GPIO"
@ -690,14 +690,14 @@ config GPIO_VX855
select MFD_CORE
select MFD_VX855
help
Support access to the VX855/VX875 GPIO lines through the gpio library.
Support access to the VX855/VX875 GPIO lines through the GPIO library.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
This driver provides common support for accessing the device.
Additional drivers must be enabled in order to use the
functionality of the device.
config GPIO_WCD934X
tristate "Qualcomm Technologies Inc WCD9340/WCD9341 gpio controller driver"
tristate "Qualcomm Technologies Inc WCD9340/WCD9341 GPIO controller driver"
depends on MFD_WCD934X && OF_GPIO
help
This driver is to support GPIO block found on the Qualcomm Technologies
@ -727,7 +727,7 @@ config GPIO_XILINX
select GPIOLIB_IRQCHIP
depends on OF_GPIO
help
Say yes here to support the Xilinx FPGA GPIO device
Say yes here to support the Xilinx FPGA GPIO device.
config GPIO_XLP
tristate "Netlogic XLP GPIO support"
@ -748,7 +748,7 @@ config GPIO_XTENSA
depends on !SMP
help
Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input)
and EXPSTATE (output) ports
and EXPSTATE (output) ports.
config GPIO_ZEVIO
bool "LSI ZEVIO SoC memory mapped GPIOs"
@ -763,6 +763,18 @@ config GPIO_ZYNQ
help
Say yes here to support Xilinx Zynq GPIO controller.
config GPIO_ZYNQMP_MODEPIN
tristate "ZynqMP ps-mode pin GPIO configuration driver"
depends on ZYNQMP_FIRMWARE
default ZYNQMP_FIRMWARE
help
Say yes here to support the ZynqMP ps-mode pin GPIO configuration
driver.
This ps-mode pin GPIO driver is based on GPIO framework. PS_MODE
is 4-bits boot mode pins. It sets and gets the status of
the ps-mode pin. Every pin can be configured as input/output.
config GPIO_LOONGSON1
tristate "Loongson1 GPIO support"
depends on MACH_LOONGSON32
@ -773,12 +785,12 @@ config GPIO_LOONGSON1
config GPIO_AMD_FCH
tristate "GPIO support for AMD Fusion Controller Hub (G-series SOCs)"
help
This option enables driver for GPIO on AMDs Fusion Controller Hub,
as found on G-series SOCs (eg. GX-412TC)
This option enables driver for GPIO on AMD's Fusion Controller Hub,
as found on G-series SOCs (e.g. GX-412TC).
Note: This driver doesn't registers itself automatically, as it
needs to be provided with platform specific configuration.
(See eg. CONFIG_PCENGINES_APU2.)
Note: This driver doesn't register itself automatically, as it
needs to be provided with platform-specific configuration.
(See e.g. CONFIG_PCENGINES_APU2.)
config GPIO_MSC313
bool "MStar MSC313 GPIO support"
@ -788,7 +800,7 @@ config GPIO_MSC313
select IRQ_DOMAIN_HIERARCHY
help
Say Y here to support the main GPIO block on MStar/SigmaStar
ARMv7 based SoCs.
ARMv7-based SoCs.
config GPIO_IDT3243X
tristate "IDT 79RC3243X GPIO support"
@ -797,7 +809,7 @@ config GPIO_IDT3243X
select GPIOLIB_IRQCHIP
help
Select this option to enable GPIO driver for
IDT 79RC3243X based devices like Mikrotik RB532.
IDT 79RC3243X-based devices like Mikrotik RB532.
To compile this driver as a module, choose M here: the module will
be called gpio-idt3243x.
@ -875,7 +887,7 @@ config GPIO_IT87
well.
To compile this driver as a module, choose M here: the module will
be called gpio_it87
be called gpio_it87.
config GPIO_SCH
tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO"
@ -891,7 +903,7 @@ config GPIO_SCH
powered by the core power rail and are turned off during sleep
modes (S3 and higher). The remaining four GPIOs are powered by
the Intel SCH suspend power supply. These GPIOs remain
active during S3. The suspend powered GPIOs can be used to wake the
active during S3. The suspend-powered GPIOs can be used to wake the
system from the Suspend-to-RAM state.
The Intel Tunnel Creek processor has 5 GPIOs powered by the
@ -1044,7 +1056,7 @@ config GPIO_PCA953X_IRQ
select GPIOLIB_IRQCHIP
help
Say yes here to enable the pca953x to be used as an interrupt
controller. It requires the driver to be built in the kernel.
controller.
config GPIO_PCA9570
tristate "PCA9570 4-Bit I2C GPO expander"
@ -1171,7 +1183,7 @@ config GPIO_CRYSTAL_COVE
help
Support for GPIO pins on Crystal Cove PMIC.
Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
Say Yes if you have a Intel SoC-based tablet with Crystal Cove PMIC
inside.
This driver can also be built as a module. If so, the module will be
@ -1201,7 +1213,7 @@ config GPIO_DA9055
Say yes here to enable the GPIO driver for the DA9055 chip.
The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
be controller by this driver.
be controlled by this driver.
If driver is built as a module it will be called gpio-da9055.
@ -1223,7 +1235,7 @@ config HTC_EGPIO
help
This driver supports the CPLD egpio chip present on
several HTC phones. It provides basic support for input
pins, output pins, and irqs.
pins, output pins, and IRQs.
config GPIO_JANZ_TTL
tristate "Janz VMOD-TTL Digital IO Module"
@ -1284,8 +1296,8 @@ config GPIO_MAX77620
help
GPIO driver for MAX77620 and MAX20024 PMIC from Maxim Semiconductor.
MAX77620 PMIC has 8 pins that can be configured as GPIOs. The
driver also provides interrupt support for each of the gpios.
Say yes here to enable the max77620 to be used as gpio controller.
driver also provides interrupt support for each of the GPIOs.
Say yes here to enable the max77620 to be used as GPIO controller.
config GPIO_MAX77650
tristate "Maxim MAX77650/77651 GPIO support"
@ -1307,8 +1319,8 @@ config GPIO_RC5T583
help
Select this option to enable GPIO driver for the Ricoh RC5T583
chip family.
This driver provides the support for driving/reading the gpio pins
of RC5T583 device through standard gpio library.
This driver provides the support for driving/reading the GPIO pins
of RC5T583 device through standard GPIO library.
config GPIO_SL28CPLD
tristate "Kontron sl28cpld GPIO support"
@ -1377,7 +1389,7 @@ config GPIO_TPS65912
tristate "TI TPS65912 GPIO"
depends on MFD_TPS65912
help
This driver supports TPS65912 gpio chip
This driver supports TPS65912 GPIO chip.
config GPIO_TPS68470
bool "TPS68470 GPIO"
@ -1385,7 +1397,7 @@ config GPIO_TPS68470
help
Select this option to enable GPIO driver for the TPS68470
chip family.
There are 7 GPIOs and few sensor related GPIOs supported
There are 7 GPIOs and few sensor-related GPIOs supported
by the TPS68470. While the 7 GPIOs can be configured as
input or output as appropriate, the sensor related GPIOs
are "output only" GPIOs.
@ -1430,7 +1442,7 @@ config GPIO_WHISKEY_COVE
help
Support for GPIO pins on Whiskey Cove PMIC.
Say Yes if you have a Intel SoC based tablet with Whiskey Cove PMIC
Say Yes if you have an Intel SoC-based tablet with Whiskey Cove PMIC
inside.
This driver can also be built as a module. If so, the module will be
@ -1467,10 +1479,10 @@ config GPIO_AMD8111
depends on X86 || COMPILE_TEST
depends on HAS_IOPORT_MAP
help
The AMD 8111 south bridge contains 32 GPIO pins which can be used.
The AMD 8111 southbridge contains 32 GPIO pins which can be used.
Note, that usually system firmware/ACPI handles GPIO pins on their
own and users might easily break their systems with uncarefull usage
Note that usually system firmware/ACPI handles GPIO pins on their
own and users might easily break their systems with uncareful usage
of this driver!
If unsure, say N
@ -1518,22 +1530,22 @@ config GPIO_ML_IOH
select GENERIC_IRQ_CHIP
help
ML7213 is companion chip for Intel Atom E6xx series.
This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
Hub) which is for IVI(In-Vehicle Infotainment) use.
This driver can be used for OKI SEMICONDUCTOR ML7213 IOH (Input/Output
Hub) which is for IVI (In-Vehicle Infotainment) use.
This driver can access the IOH's GPIO device.
config GPIO_PCH
tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
tristate "Intel EG20T PCH/LAPIS Semiconductor IOH (ML7223/ML7831) GPIO"
depends on X86_32 || MIPS || COMPILE_TEST
select GENERIC_IRQ_CHIP
help
This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
which is an IOH(Input/Output Hub) for x86 embedded processor.
This driver is for PCH (Platform Controller Hub) GPIO of Intel Topcliff,
which is an IOH (Input/Output Hub) for x86 embedded processor.
This driver can access PCH GPIO device.
This driver also can be used for LAPIS Semiconductor IOH(Input/
This driver also can be used for LAPIS Semiconductor IOH (Input/
Output Hub), ML7223 and ML7831.
ML7223 IOH is for MP(Media Phone) use.
ML7223 IOH is for MP (Media Phone) use.
ML7831 IOH is for general purpose use.
ML7223/ML7831 is companion chip for Intel Atom E6xx series.
ML7223/ML7831 is completely compatible for Intel EG20T PCH.
@ -1584,7 +1596,7 @@ config GPIO_74X164
help
Driver for 74x164 compatible serial-in/parallel-out 8-outputs
shift registers. This driver can be used to provide access
to more gpio outputs.
to more GPIO outputs.
config GPIO_MAX3191X
tristate "Maxim MAX3191x industrial serializer"
@ -1674,6 +1686,7 @@ config GPIO_MOCKUP
config GPIO_VIRTIO
tristate "VirtIO GPIO support"
depends on VIRTIO
select GPIOLIB_IRQCHIP
help
Say Y here to enable guest support for virtio-based GPIO controllers.

1
drivers/gpio/Makefile
View File

@ -184,3 +184,4 @@ obj-$(CONFIG_GPIO_XRA1403) += gpio-xra1403.o
obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o
obj-$(CONFIG_GPIO_ZEVIO) += gpio-zevio.o
obj-$(CONFIG_GPIO_ZYNQ) += gpio-zynq.o
obj-$(CONFIG_GPIO_ZYNQMP_MODEPIN) += gpio-zynqmp-modepin.o

25
drivers/gpio/gpio-aggregator.c
View File

@ -247,6 +247,11 @@ struct gpiochip_fwd {
unsigned long tmp[]; /* values and descs for multiple ops */
};
#define fwd_tmp_values(fwd) &(fwd)->tmp[0]
#define fwd_tmp_descs(fwd) (void *)&(fwd)->tmp[BITS_TO_LONGS((fwd)->chip.ngpio)]
#define fwd_tmp_size(ngpios) (BITS_TO_LONGS((ngpios)) + (ngpios))
static int gpio_fwd_get_direction(struct gpio_chip *chip, unsigned int offset)
{
struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
@ -279,15 +284,11 @@ static int gpio_fwd_get(struct gpio_chip *chip, unsigned int offset)
static int gpio_fwd_get_multiple(struct gpiochip_fwd *fwd, unsigned long *mask,
unsigned long *bits)
{
struct gpio_desc **descs;
unsigned long *values;
struct gpio_desc **descs = fwd_tmp_descs(fwd);
unsigned long *values = fwd_tmp_values(fwd);
unsigned int i, j = 0;
int error;
/* Both values bitmap and desc pointers are stored in tmp[] */
values = &fwd->tmp[0];
descs = (void *)&fwd->tmp[BITS_TO_LONGS(fwd->chip.ngpio)];
bitmap_clear(values, 0, fwd->chip.ngpio);
for_each_set_bit(i, mask, fwd->chip.ngpio)
descs[j++] = fwd->descs[i];
@ -333,14 +334,10 @@ static void gpio_fwd_set(struct gpio_chip *chip, unsigned int offset, int value)
static void gpio_fwd_set_multiple(struct gpiochip_fwd *fwd, unsigned long *mask,
unsigned long *bits)
{
struct gpio_desc **descs;
unsigned long *values;
struct gpio_desc **descs = fwd_tmp_descs(fwd);
unsigned long *values = fwd_tmp_values(fwd);
unsigned int i, j = 0;
/* Both values bitmap and desc pointers are stored in tmp[] */
values = &fwd->tmp[0];
descs = (void *)&fwd->tmp[BITS_TO_LONGS(fwd->chip.ngpio)];
for_each_set_bit(i, mask, fwd->chip.ngpio) {
__assign_bit(j, values, test_bit(i, bits));
descs[j++] = fwd->descs[i];
@ -398,8 +395,8 @@ static struct gpiochip_fwd *gpiochip_fwd_create(struct device *dev,
unsigned int i;
int error;
fwd = devm_kzalloc(dev, struct_size(fwd, tmp,
BITS_TO_LONGS(ngpios) + ngpios), GFP_KERNEL);
fwd = devm_kzalloc(dev, struct_size(fwd, tmp, fwd_tmp_size(ngpios)),
GFP_KERNEL);
if (!fwd)
return ERR_PTR(-ENOMEM);

4
drivers/gpio/gpio-max7300.c
View File

@ -50,7 +50,9 @@ static int max7300_probe(struct i2c_client *client,
static int max7300_remove(struct i2c_client *client)
{
return __max730x_remove(&client->dev);
__max730x_remove(&client->dev);
return 0;
}
static const struct i2c_device_id max7300_id[] = {

4
drivers/gpio/gpio-max7301.c
View File

@ -66,7 +66,9 @@ static int max7301_probe(struct spi_device *spi)
static int max7301_remove(struct spi_device *spi)
{
return __max730x_remove(&spi->dev);
__max730x_remove(&spi->dev);
return 0;
}
static const struct spi_device_id max7301_id[] = {

6
drivers/gpio/gpio-max730x.c
View File

@ -220,18 +220,14 @@ exit_destroy:
}
EXPORT_SYMBOL_GPL(__max730x_probe);
int __max730x_remove(struct device *dev)
void __max730x_remove(struct device *dev)
{
struct max7301 *ts = dev_get_drvdata(dev);
if (ts == NULL)
return -ENODEV;
/* Power down the chip and disable IRQ output */
ts->write(dev, 0x04, 0x00);
gpiochip_remove(&ts->chip);
mutex_destroy(&ts->lock);
return 0;
}
EXPORT_SYMBOL_GPL(__max730x_remove);

1
drivers/gpio/gpio-max77620.c
View File

@ -365,5 +365,4 @@ module_platform_driver(max77620_gpio_driver);
MODULE_DESCRIPTION("GPIO interface for MAX77620 and MAX20024 PMIC");
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
MODULE_AUTHOR("Chaitanya Bandi <bandik@nvidia.com>");
MODULE_ALIAS("platform:max77620-gpio");
MODULE_LICENSE("GPL v2");

2
drivers/gpio/gpio-mc33880.c
View File

@ -139,8 +139,6 @@ static int mc33880_remove(struct spi_device *spi)
struct mc33880 *mc;
mc = spi_get_drvdata(spi);
if (!mc)
return -ENODEV;
gpiochip_remove(&mc->chip);
mutex_destroy(&mc->lock);

142
drivers/gpio/gpio-mlxbf2.c
View File

@ -1,9 +1,14 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2020-2021 NVIDIA CORPORATION & AFFILIATES
*/
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
@ -43,9 +48,14 @@
#define YU_GPIO_MODE0 0x0c
#define YU_GPIO_DATASET 0x14
#define YU_GPIO_DATACLEAR 0x18
#define YU_GPIO_CAUSE_RISE_EN 0x44
#define YU_GPIO_CAUSE_FALL_EN 0x48
#define YU_GPIO_MODE1_CLEAR 0x50
#define YU_GPIO_MODE0_SET 0x54
#define YU_GPIO_MODE0_CLEAR 0x58
#define YU_GPIO_CAUSE_OR_CAUSE_EVTEN0 0x80
#define YU_GPIO_CAUSE_OR_EVTEN0 0x94
#define YU_GPIO_CAUSE_OR_CLRCAUSE 0x98
struct mlxbf2_gpio_context_save_regs {
u32 gpio_mode0;
@ -55,6 +65,7 @@ struct mlxbf2_gpio_context_save_regs {
/* BlueField-2 gpio block context structure. */
struct mlxbf2_gpio_context {
struct gpio_chip gc;
struct irq_chip irq_chip;
/* YU GPIO blocks address */
void __iomem *gpio_io;
@ -218,15 +229,114 @@ static int mlxbf2_gpio_direction_output(struct gpio_chip *chip,
return ret;
}
static void mlxbf2_gpio_irq_enable(struct irq_data *irqd)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
struct mlxbf2_gpio_context *gs = gpiochip_get_data(gc);
int offset = irqd_to_hwirq(irqd);
unsigned long flags;
u32 val;
spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
val = readl(gs->gpio_io + YU_GPIO_CAUSE_OR_CLRCAUSE);
val |= BIT(offset);
writel(val, gs->gpio_io + YU_GPIO_CAUSE_OR_CLRCAUSE);
val = readl(gs->gpio_io + YU_GPIO_CAUSE_OR_EVTEN0);
val |= BIT(offset);
writel(val, gs->gpio_io + YU_GPIO_CAUSE_OR_EVTEN0);
spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
}
static void mlxbf2_gpio_irq_disable(struct irq_data *irqd)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
struct mlxbf2_gpio_context *gs = gpiochip_get_data(gc);
int offset = irqd_to_hwirq(irqd);
unsigned long flags;
u32 val;
spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
val = readl(gs->gpio_io + YU_GPIO_CAUSE_OR_EVTEN0);
val &= ~BIT(offset);
writel(val, gs->gpio_io + YU_GPIO_CAUSE_OR_EVTEN0);
spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
}
static irqreturn_t mlxbf2_gpio_irq_handler(int irq, void *ptr)
{
struct mlxbf2_gpio_context *gs = ptr;
struct gpio_chip *gc = &gs->gc;
unsigned long pending;
u32 level;
pending = readl(gs->gpio_io + YU_GPIO_CAUSE_OR_CAUSE_EVTEN0);
writel(pending, gs->gpio_io + YU_GPIO_CAUSE_OR_CLRCAUSE);
for_each_set_bit(level, &pending, gc->ngpio) {
int gpio_irq = irq_find_mapping(gc->irq.domain, level);
generic_handle_irq(gpio_irq);
}
return IRQ_RETVAL(pending);
}
static int
mlxbf2_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
struct mlxbf2_gpio_context *gs = gpiochip_get_data(gc);
int offset = irqd_to_hwirq(irqd);
unsigned long flags;
bool fall = false;
bool rise = false;
u32 val;
switch (type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_EDGE_BOTH:
fall = true;
rise = true;
break;
case IRQ_TYPE_EDGE_RISING:
rise = true;
break;
case IRQ_TYPE_EDGE_FALLING:
fall = true;
break;
default:
return -EINVAL;
}
spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
if (fall) {
val = readl(gs->gpio_io + YU_GPIO_CAUSE_FALL_EN);
val |= BIT(offset);
writel(val, gs->gpio_io + YU_GPIO_CAUSE_FALL_EN);
}
if (rise) {
val = readl(gs->gpio_io + YU_GPIO_CAUSE_RISE_EN);
val |= BIT(offset);
writel(val, gs->gpio_io + YU_GPIO_CAUSE_RISE_EN);
}
spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
return 0;
}
/* BlueField-2 GPIO driver initialization routine. */
static int
mlxbf2_gpio_probe(struct platform_device *pdev)
{
struct mlxbf2_gpio_context *gs;
struct device *dev = &pdev->dev;
struct gpio_irq_chip *girq;
struct gpio_chip *gc;
unsigned int npins;
int ret;
const char *name;
int ret, irq;
name = dev_name(dev);
gs = devm_kzalloc(dev, sizeof(*gs), GFP_KERNEL);
if (!gs)
@ -266,6 +376,34 @@ mlxbf2_gpio_probe(struct platform_device *pdev)
gc->ngpio = npins;
gc->owner = THIS_MODULE;
irq = platform_get_irq(pdev, 0);
if (irq >= 0) {
gs->irq_chip.name = name;
gs->irq_chip.irq_set_type = mlxbf2_gpio_irq_set_type;
gs->irq_chip.irq_enable = mlxbf2_gpio_irq_enable;
gs->irq_chip.irq_disable = mlxbf2_gpio_irq_disable;
girq = &gs->gc.irq;
girq->chip = &gs->irq_chip;
girq->handler = handle_simple_irq;
girq->default_type = IRQ_TYPE_NONE;
/* This will let us handle the parent IRQ in the driver */
girq->num_parents = 0;
girq->parents = NULL;
girq->parent_handler = NULL;
/*
* Directly request the irq here instead of passing
* a flow-handler because the irq is shared.
*/
ret = devm_request_irq(dev, irq, mlxbf2_gpio_irq_handler,
IRQF_SHARED, name, gs);
if (ret) {
dev_err(dev, "failed to request IRQ");
return ret;
}
}
platform_set_drvdata(pdev, gs);
ret = devm_gpiochip_add_data(dev, &gs->gc, gs);
@ -320,5 +458,5 @@ static struct platform_driver mlxbf2_gpio_driver = {
module_platform_driver(mlxbf2_gpio_driver);
MODULE_DESCRIPTION("Mellanox BlueField-2 GPIO Driver");
MODULE_AUTHOR("Mellanox Technologies");
MODULE_AUTHOR("Asmaa Mnebhi <asmaa@nvidia.com>");
MODULE_LICENSE("GPL v2");

2
drivers/gpio/gpio-realtek-otto.c
View File

@ -205,7 +205,7 @@ static void realtek_gpio_irq_handler(struct irq_desc *desc)
status = realtek_gpio_read_isr(ctrl, lines_done / 8);
port_pin_count = min(gc->ngpio - lines_done, 8U);
for_each_set_bit(offset, &status, port_pin_count)
generic_handle_domain_irq(gc->irq.domain, offset);
generic_handle_domain_irq(gc->irq.domain, offset + lines_done);
}
chained_irq_exit(irq_chip, desc);

114
drivers/gpio/gpio-tegra186.c
View File

@ -69,6 +69,8 @@ struct tegra_gpio_soc {
const char *name;
unsigned int instance;
unsigned int num_irqs_per_bank;
const struct tegra186_pin_range *pin_ranges;
unsigned int num_pin_ranges;
const char *pinmux;
@ -81,6 +83,8 @@ struct tegra_gpio {
unsigned int *irq;
const struct tegra_gpio_soc *soc;
unsigned int num_irqs_per_bank;
unsigned int num_banks;
void __iomem *secure;
void __iomem *base;
@ -450,7 +454,7 @@ static void tegra186_gpio_irq(struct irq_desc *desc)
struct irq_domain *domain = gpio->gpio.irq.domain;
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned int parent = irq_desc_get_irq(desc);
unsigned int i, offset = 0;
unsigned int i, j, offset = 0;
chained_irq_enter(chip, desc);
@ -463,7 +467,12 @@ static void tegra186_gpio_irq(struct irq_desc *desc)
base = gpio->base + port->bank * 0x1000 + port->port * 0x200;
/* skip ports that are not associated with this bank */
if (parent != gpio->irq[port->bank])
for (j = 0; j < gpio->num_irqs_per_bank; j++) {
if (parent == gpio->irq[port->bank * gpio->num_irqs_per_bank + j])
break;
}
if (j == gpio->num_irqs_per_bank)
goto skip;
value = readl(base + TEGRA186_GPIO_INTERRUPT_STATUS(1));
@ -565,6 +574,7 @@ static const struct of_device_id tegra186_pmc_of_match[] = {
static void tegra186_gpio_init_route_mapping(struct tegra_gpio *gpio)
{
struct device *dev = gpio->gpio.parent;
unsigned int i, j;
u32 value;
@ -583,17 +593,60 @@ static void tegra186_gpio_init_route_mapping(struct tegra_gpio *gpio)
*/
if ((value & TEGRA186_GPIO_CTL_SCR_SEC_REN) == 0 &&
(value & TEGRA186_GPIO_CTL_SCR_SEC_WEN) == 0) {
for (j = 0; j < 8; j++) {
/*
* On Tegra194 and later, each pin can be routed to one or more
* interrupts.
*/
for (j = 0; j < gpio->num_irqs_per_bank; j++) {
dev_dbg(dev, "programming default interrupt routing for port %s\n",
port->name);
offset = TEGRA186_GPIO_INT_ROUTE_MAPPING(p, j);
value = readl(base + offset);
value = BIT(port->pins) - 1;
writel(value, base + offset);
/*
* By default we only want to route GPIO pins to IRQ 0. This works
* only under the assumption that we're running as the host kernel
* and hence all GPIO pins are owned by Linux.
*
* For cases where Linux is the guest OS, the hypervisor will have
* to configure the interrupt routing and pass only the valid
* interrupts via device tree.
*/
if (j == 0) {
value = readl(base + offset);
value = BIT(port->pins) - 1;
writel(value, base + offset);
}
}
}
}
}
static unsigned int tegra186_gpio_irqs_per_bank(struct tegra_gpio *gpio)
{
struct device *dev = gpio->gpio.parent;
if (gpio->num_irq > gpio->num_banks) {
if (gpio->num_irq % gpio->num_banks != 0)
goto error;
}
if (gpio->num_irq < gpio->num_banks)
goto error;
gpio->num_irqs_per_bank = gpio->num_irq / gpio->num_banks;
if (gpio->num_irqs_per_bank > gpio->soc->num_irqs_per_bank)
goto error;
return 0;
error:
dev_err(dev, "invalid number of interrupts (%u) for %u banks\n",
gpio->num_irq, gpio->num_banks);
return -EINVAL;
}
static int tegra186_gpio_probe(struct platform_device *pdev)
{
unsigned int i, j, offset;
@ -608,7 +661,17 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
return -ENOMEM;
gpio->soc = device_get_match_data(&pdev->dev);
gpio->gpio.label = gpio->soc->name;
gpio->gpio.parent = &pdev->dev;
/* count the number of banks in the controller */
for (i = 0; i < gpio->soc->num_ports; i++)
if (gpio->soc->ports[i].bank > gpio->num_banks)
gpio->num_banks = gpio->soc->ports[i].bank;
gpio->num_banks++;
/* get register apertures */
gpio->secure = devm_platform_ioremap_resource_byname(pdev, "security");
if (IS_ERR(gpio->secure)) {
gpio->secure = devm_platform_ioremap_resource(pdev, 0);
@ -629,6 +692,10 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
gpio->num_irq = err;
err = tegra186_gpio_irqs_per_bank(gpio);
if (err < 0)
return err;
gpio->irq = devm_kcalloc(&pdev->dev, gpio->num_irq, sizeof(*gpio->irq),
GFP_KERNEL);
if (!gpio->irq)
@ -642,9 +709,6 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
gpio->irq[i] = err;
}
gpio->gpio.label = gpio->soc->name;
gpio->gpio.parent = &pdev->dev;
gpio->gpio.request = gpiochip_generic_request;
gpio->gpio.free = gpiochip_generic_free;
gpio->gpio.get_direction = tegra186_gpio_get_direction;
@ -708,7 +772,31 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
irq->parent_handler = tegra186_gpio_irq;
irq->parent_handler_data = gpio;
irq->num_parents = gpio->num_irq;
irq->parents = gpio->irq;
/*
* To simplify things, use a single interrupt per bank for now. Some
* chips support up to 8 interrupts per bank, which can be useful to
* distribute the load and decrease the processing latency for GPIOs
* but it also requires a more complicated interrupt routing than we
* currently program.
*/
if (gpio->num_irqs_per_bank > 1) {
irq->parents = devm_kcalloc(&pdev->dev, gpio->num_banks,
sizeof(*irq->parents), GFP_KERNEL);
if (!irq->parents)
return -ENOMEM;
for (i = 0; i < gpio->num_banks; i++)
irq->parents[i] = gpio->irq[i * gpio->num_irqs_per_bank];
irq->num_parents = gpio->num_banks;
} else {
irq->num_parents = gpio->num_irq;
irq->parents = gpio->irq;
}
if (gpio->soc->num_irqs_per_bank > 1)
tegra186_gpio_init_route_mapping(gpio);
np = of_find_matching_node(NULL, tegra186_pmc_of_match);
if (np) {
@ -719,8 +807,6 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
}
tegra186_gpio_init_route_mapping(gpio);
irq->map = devm_kcalloc(&pdev->dev, gpio->gpio.ngpio,
sizeof(*irq->map), GFP_KERNEL);
if (!irq->map)
@ -777,6 +863,7 @@ static const struct tegra_gpio_soc tegra186_main_soc = {
.ports = tegra186_main_ports,
.name = "tegra186-gpio",
.instance = 0,
.num_irqs_per_bank = 1,
};
#define TEGRA186_AON_GPIO_PORT(_name, _bank, _port, _pins) \
@ -803,6 +890,7 @@ static const struct tegra_gpio_soc tegra186_aon_soc = {
.ports = tegra186_aon_ports,
.name = "tegra186-gpio-aon",
.instance = 1,
.num_irqs_per_bank = 1,
};
#define TEGRA194_MAIN_GPIO_PORT(_name, _bank, _port, _pins) \
@ -854,6 +942,7 @@ static const struct tegra_gpio_soc tegra194_main_soc = {
.ports = tegra194_main_ports,
.name = "tegra194-gpio",
.instance = 0,
.num_irqs_per_bank = 8,
.num_pin_ranges = ARRAY_SIZE(tegra194_main_pin_ranges),
.pin_ranges = tegra194_main_pin_ranges,
.pinmux = "nvidia,tegra194-pinmux",
@ -880,6 +969,7 @@ static const struct tegra_gpio_soc tegra194_aon_soc = {
.ports = tegra194_aon_ports,
.name = "tegra194-gpio-aon",
.instance = 1,
.num_irqs_per_bank = 8,
};
static const struct of_device_id tegra186_gpio_of_match[] = {

1
drivers/gpio/gpio-tps65218.c
View File

@ -230,4 +230,3 @@ module_platform_driver(tps65218_gpio_driver);
MODULE_AUTHOR("Nicolas Saenz Julienne <nicolassaenzj@gmail.com>");
MODULE_DESCRIPTION("GPO interface for TPS65218 PMICs");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:tps65218-gpio");

18
drivers/gpio/gpio-uniphier.c
View File

@ -179,8 +179,8 @@ static int uniphier_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
static void uniphier_gpio_irq_mask(struct irq_data *data)
{
struct uniphier_gpio_priv *priv = data->chip_data;
u32 mask = BIT(data->hwirq);
struct uniphier_gpio_priv *priv = irq_data_get_irq_chip_data(data);
u32 mask = BIT(irqd_to_hwirq(data));
uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, 0);
@ -189,8 +189,8 @@ static void uniphier_gpio_irq_mask(struct irq_data *data)
static void uniphier_gpio_irq_unmask(struct irq_data *data)
{
struct uniphier_gpio_priv *priv = data->chip_data;
u32 mask = BIT(data->hwirq);
struct uniphier_gpio_priv *priv = irq_data_get_irq_chip_data(data);
u32 mask = BIT(irqd_to_hwirq(data));
uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, mask);
@ -199,8 +199,8 @@ static void uniphier_gpio_irq_unmask(struct irq_data *data)
static int uniphier_gpio_irq_set_type(struct irq_data *data, unsigned int type)
{
struct uniphier_gpio_priv *priv = data->chip_data;
u32 mask = BIT(data->hwirq);
struct uniphier_gpio_priv *priv = irq_data_get_irq_chip_data(data);
u32 mask = BIT(irqd_to_hwirq(data));
u32 val = 0;
if (type == IRQ_TYPE_EDGE_BOTH) {
@ -297,7 +297,8 @@ static int uniphier_gpio_irq_domain_activate(struct irq_domain *domain,
struct uniphier_gpio_priv *priv = domain->host_data;
struct gpio_chip *chip = &priv->chip;
return gpiochip_lock_as_irq(chip, data->hwirq + UNIPHIER_GPIO_IRQ_OFFSET);
return gpiochip_lock_as_irq(chip,
irqd_to_hwirq(data) + UNIPHIER_GPIO_IRQ_OFFSET);
}
static void uniphier_gpio_irq_domain_deactivate(struct irq_domain *domain,
@ -306,7 +307,8 @@ static void uniphier_gpio_irq_domain_deactivate(struct irq_domain *domain,
struct uniphier_gpio_priv *priv = domain->host_data;
struct gpio_chip *chip = &priv->chip;
gpiochip_unlock_as_irq(chip, data->hwirq + UNIPHIER_GPIO_IRQ_OFFSET);
gpiochip_unlock_as_irq(chip,
irqd_to_hwirq(data) + UNIPHIER_GPIO_IRQ_OFFSET);
}
static const struct irq_domain_ops uniphier_gpio_irq_domain_ops = {

302
drivers/gpio/gpio-virtio.c
View File

@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/virtio_config.h>
#include <uapi/linux/virtio_gpio.h>
#include <uapi/linux/virtio_ids.h>
@ -28,12 +29,30 @@ struct virtio_gpio_line {
unsigned int rxlen;
};
struct vgpio_irq_line {
u8 type;
bool disabled;
bool masked;
bool queued;
bool update_pending;
bool queue_pending;
struct virtio_gpio_irq_request ireq ____cacheline_aligned;
struct virtio_gpio_irq_response ires ____cacheline_aligned;
};
struct virtio_gpio {
struct virtio_device *vdev;
struct mutex lock; /* Protects virtqueue operation */
struct gpio_chip gc;
struct virtio_gpio_line *lines;
struct virtqueue *request_vq;
/* irq support */
struct virtqueue *event_vq;
struct mutex irq_lock; /* Protects irq operation */
raw_spinlock_t eventq_lock; /* Protects queuing of the buffer */
struct vgpio_irq_line *irq_lines;
};
static int _virtio_gpio_req(struct virtio_gpio *vgpio, u16 type, u16 gpio,
@ -186,6 +205,238 @@ static void virtio_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_SET_VALUE, gpio, value, NULL);
}
/* Interrupt handling */
static void virtio_gpio_irq_prepare(struct virtio_gpio *vgpio, u16 gpio)
{
struct vgpio_irq_line *irq_line = &vgpio->irq_lines[gpio];
struct virtio_gpio_irq_request *ireq = &irq_line->ireq;
struct virtio_gpio_irq_response *ires = &irq_line->ires;
struct scatterlist *sgs[2], req_sg, res_sg;
int ret;
if (WARN_ON(irq_line->queued || irq_line->masked || irq_line->disabled))
return;
ireq->gpio = cpu_to_le16(gpio);
sg_init_one(&req_sg, ireq, sizeof(*ireq));
sg_init_one(&res_sg, ires, sizeof(*ires));
sgs[0] = &req_sg;
sgs[1] = &res_sg;
ret = virtqueue_add_sgs(vgpio->event_vq, sgs, 1, 1, irq_line, GFP_ATOMIC);
if (ret) {
dev_err(&vgpio->vdev->dev, "failed to add request to eventq\n");
return;
}
irq_line->queued = true;
virtqueue_kick(vgpio->event_vq);
}
static void virtio_gpio_irq_enable(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct virtio_gpio *vgpio = gpiochip_get_data(gc);
struct vgpio_irq_line *irq_line = &vgpio->irq_lines[d->hwirq];
raw_spin_lock(&vgpio->eventq_lock);
irq_line->disabled = false;
irq_line->masked = false;
irq_line->queue_pending = true;
raw_spin_unlock(&vgpio->eventq_lock);
irq_line->update_pending = true;
}
static void virtio_gpio_irq_disable(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct virtio_gpio *vgpio = gpiochip_get_data(gc);
struct vgpio_irq_line *irq_line = &vgpio->irq_lines[d->hwirq];
raw_spin_lock(&vgpio->eventq_lock);
irq_line->disabled = true;
irq_line->masked = true;
irq_line->queue_pending = false;
raw_spin_unlock(&vgpio->eventq_lock);
irq_line->update_pending = true;
}
static void virtio_gpio_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct virtio_gpio *vgpio = gpiochip_get_data(gc);
struct vgpio_irq_line *irq_line = &vgpio->irq_lines[d->hwirq];
raw_spin_lock(&vgpio->eventq_lock);
irq_line->masked = true;
raw_spin_unlock(&vgpio->eventq_lock);
}
static void virtio_gpio_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct virtio_gpio *vgpio = gpiochip_get_data(gc);
struct vgpio_irq_line *irq_line = &vgpio->irq_lines[d->hwirq];
raw_spin_lock(&vgpio->eventq_lock);
irq_line->masked = false;
/* Queue the buffer unconditionally on unmask */
virtio_gpio_irq_prepare(vgpio, d->hwirq);
raw_spin_unlock(&vgpio->eventq_lock);
}
static int virtio_gpio_irq_set_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct virtio_gpio *vgpio = gpiochip_get_data(gc);
struct vgpio_irq_line *irq_line = &vgpio->irq_lines[d->hwirq];
switch (type) {
case IRQ_TYPE_EDGE_RISING:
type = VIRTIO_GPIO_IRQ_TYPE_EDGE_RISING;
break;
case IRQ_TYPE_EDGE_FALLING:
type = VIRTIO_GPIO_IRQ_TYPE_EDGE_FALLING;
break;
case IRQ_TYPE_EDGE_BOTH:
type = VIRTIO_GPIO_IRQ_TYPE_EDGE_BOTH;
break;
case IRQ_TYPE_LEVEL_LOW:
type = VIRTIO_GPIO_IRQ_TYPE_LEVEL_LOW;
break;
case IRQ_TYPE_LEVEL_HIGH:
type = VIRTIO_GPIO_IRQ_TYPE_LEVEL_HIGH;
break;
default:
dev_err(&vgpio->vdev->dev, "unsupported irq type: %u\n", type);
return -EINVAL;
}
irq_line->type = type;
irq_line->update_pending = true;
return 0;
}
static void virtio_gpio_irq_bus_lock(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct virtio_gpio *vgpio = gpiochip_get_data(gc);
mutex_lock(&vgpio->irq_lock);
}
static void virtio_gpio_irq_bus_sync_unlock(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct virtio_gpio *vgpio = gpiochip_get_data(gc);
struct vgpio_irq_line *irq_line = &vgpio->irq_lines[d->hwirq];
u8 type = irq_line->disabled ? VIRTIO_GPIO_IRQ_TYPE_NONE : irq_line->type;
unsigned long flags;
if (irq_line->update_pending) {
irq_line->update_pending = false;
virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_IRQ_TYPE, d->hwirq, type,
NULL);
/* Queue the buffer only after interrupt is enabled */
raw_spin_lock_irqsave(&vgpio->eventq_lock, flags);
if (irq_line->queue_pending) {
irq_line->queue_pending = false;
virtio_gpio_irq_prepare(vgpio, d->hwirq);
}
raw_spin_unlock_irqrestore(&vgpio->eventq_lock, flags);
}
mutex_unlock(&vgpio->irq_lock);
}
static struct irq_chip vgpio_irq_chip = {
.name = "virtio-gpio",
.irq_enable = virtio_gpio_irq_enable,
.irq_disable = virtio_gpio_irq_disable,
.irq_mask = virtio_gpio_irq_mask,
.irq_unmask = virtio_gpio_irq_unmask,
.irq_set_type = virtio_gpio_irq_set_type,
/* These are required to implement irqchip for slow busses */
.irq_bus_lock = virtio_gpio_irq_bus_lock,
.irq_bus_sync_unlock = virtio_gpio_irq_bus_sync_unlock,
};
static bool ignore_irq(struct virtio_gpio *vgpio, int gpio,
struct vgpio_irq_line *irq_line)
{
bool ignore = false;
raw_spin_lock(&vgpio->eventq_lock);
irq_line->queued = false;
/* Interrupt is disabled currently */
if (irq_line->masked || irq_line->disabled) {
ignore = true;
goto unlock;
}
/*
* Buffer is returned as the interrupt was disabled earlier, but is
* enabled again now. Requeue the buffers.
*/
if (irq_line->ires.status == VIRTIO_GPIO_IRQ_STATUS_INVALID) {
virtio_gpio_irq_prepare(vgpio, gpio);
ignore = true;
goto unlock;
}
if (WARN_ON(irq_line->ires.status != VIRTIO_GPIO_IRQ_STATUS_VALID))
ignore = true;
unlock:
raw_spin_unlock(&vgpio->eventq_lock);
return ignore;
}
static void virtio_gpio_event_vq(struct virtqueue *vq)
{
struct virtio_gpio *vgpio = vq->vdev->priv;
struct device *dev = &vgpio->vdev->dev;
struct vgpio_irq_line *irq_line;
int gpio, ret;
unsigned int len;
while (true) {
irq_line = virtqueue_get_buf(vgpio->event_vq, &len);
if (!irq_line)
break;
if (len != sizeof(irq_line->ires)) {
dev_err(dev, "irq with incorrect length (%u : %u)\n",
len, (unsigned int)sizeof(irq_line->ires));
continue;
}
/*
* Find GPIO line number from the offset of irq_line within the
* irq_lines block. We can also get GPIO number from
* irq-request, but better not to rely on a buffer returned by
* remote.
*/
gpio = irq_line - vgpio->irq_lines;
WARN_ON(gpio >= vgpio->gc.ngpio);
if (unlikely(ignore_irq(vgpio, gpio, irq_line)))
continue;
ret = generic_handle_domain_irq(vgpio->gc.irq.domain, gpio);
if (ret)
dev_err(dev, "failed to handle interrupt: %d\n", ret);
};
}
static void virtio_gpio_request_vq(struct virtqueue *vq)
{
struct virtio_gpio_line *line;
@ -210,14 +461,15 @@ static void virtio_gpio_free_vqs(struct virtio_device *vdev)
static int virtio_gpio_alloc_vqs(struct virtio_gpio *vgpio,
struct virtio_device *vdev)
{
const char * const names[] = { "requestq" };
const char * const names[] = { "requestq", "eventq" };
vq_callback_t *cbs[] = {
virtio_gpio_request_vq,
virtio_gpio_event_vq,
};
struct virtqueue *vqs[1] = { NULL };
struct virtqueue *vqs[2] = { NULL, NULL };
int ret;
ret = virtio_find_vqs(vdev, 1, vqs, cbs, names, NULL);
ret = virtio_find_vqs(vdev, vgpio->irq_lines ? 2 : 1, vqs, cbs, names, NULL);
if (ret) {
dev_err(&vdev->dev, "failed to find vqs: %d\n", ret);
return ret;
@ -225,11 +477,23 @@ static int virtio_gpio_alloc_vqs(struct virtio_gpio *vgpio,
if (!vqs[0]) {
dev_err(&vdev->dev, "failed to find requestq vq\n");
return -ENODEV;
goto out;
}
vgpio->request_vq = vqs[0];
if (vgpio->irq_lines && !vqs[1]) {
dev_err(&vdev->dev, "failed to find eventq vq\n");
goto out;
}
vgpio->event_vq = vqs[1];
return 0;
out:
if (vqs[0] || vqs[1])
virtio_gpio_free_vqs(vdev);
return -ENODEV;
}
static const char **virtio_gpio_get_names(struct virtio_gpio *vgpio,
@ -325,6 +589,30 @@ static int virtio_gpio_probe(struct virtio_device *vdev)
vgpio->gc.owner = THIS_MODULE;
vgpio->gc.can_sleep = true;
/* Interrupt support */
if (virtio_has_feature(vdev, VIRTIO_GPIO_F_IRQ)) {
vgpio->irq_lines = devm_kcalloc(dev, ngpio, sizeof(*vgpio->irq_lines), GFP_KERNEL);
if (!vgpio->irq_lines)
return -ENOMEM;
/* The event comes from the outside so no parent handler */
vgpio->gc.irq.parent_handler = NULL;
vgpio->gc.irq.num_parents = 0;
vgpio->gc.irq.parents = NULL;
vgpio->gc.irq.default_type = IRQ_TYPE_NONE;
vgpio->gc.irq.handler = handle_level_irq;
vgpio->gc.irq.chip = &vgpio_irq_chip;
for (i = 0; i < ngpio; i++) {
vgpio->irq_lines[i].type = VIRTIO_GPIO_IRQ_TYPE_NONE;
vgpio->irq_lines[i].disabled = true;
vgpio->irq_lines[i].masked = true;
}
mutex_init(&vgpio->irq_lock);
raw_spin_lock_init(&vgpio->eventq_lock);
}
ret = virtio_gpio_alloc_vqs(vgpio, vdev);
if (ret)
return ret;
@ -357,7 +645,13 @@ static const struct virtio_device_id id_table[] = {
};
MODULE_DEVICE_TABLE(virtio, id_table);
static const unsigned int features[] = {
VIRTIO_GPIO_F_IRQ,
};
static struct virtio_driver virtio_gpio_driver = {
.feature_table = features,
.feature_table_size = ARRAY_SIZE(features),
.id_table = id_table,
.probe = virtio_gpio_probe,
.remove = virtio_gpio_remove,

6
drivers/gpio/gpio-xilinx.c
View File

@ -371,8 +371,7 @@ static int __maybe_unused xgpio_resume(struct device *dev)
static int __maybe_unused xgpio_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct xgpio_instance *gpio = platform_get_drvdata(pdev);
struct xgpio_instance *gpio = dev_get_drvdata(dev);
clk_disable(gpio->clk);
@ -381,8 +380,7 @@ static int __maybe_unused xgpio_runtime_suspend(struct device *dev)
static int __maybe_unused xgpio_runtime_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct xgpio_instance *gpio = platform_get_drvdata(pdev);
struct xgpio_instance *gpio = dev_get_drvdata(dev);
return clk_enable(gpio->clk);
}

162
drivers/gpio/gpio-zynqmp-modepin.c Normal file
View File

@ -0,0 +1,162 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Driver for the ps-mode pin configuration.
*
* Copyright (c) 2021 Xilinx, Inc.
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio/driver.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/firmware/xlnx-zynqmp.h>
/* 4-bit boot mode pins */
#define MODE_PINS 4
/**
* modepin_gpio_get_value - Get the state of the specified pin of GPIO device
* @chip: gpio_chip instance to be worked on
* @pin: gpio pin number within the device
*
* This function reads the state of the specified pin of the GPIO device.
*
* Return: 0 if the pin is low, 1 if pin is high, -EINVAL wrong pin configured
* or error value.
*/
static int modepin_gpio_get_value(struct gpio_chip *chip, unsigned int pin)
{
u32 regval = 0;
int ret;
ret = zynqmp_pm_bootmode_read(&regval);
if (ret)
return ret;
/* When [0:3] corresponding bit is set, then read output bit [8:11],
* if the bit is clear then read input bit [4:7] for status or value.
*/
if (regval & BIT(pin))
return !!(regval & BIT(pin + 8));
else
return !!(regval & BIT(pin + 4));
}
/**
* modepin_gpio_set_value - Modify the state of the pin with specified value
* @chip: gpio_chip instance to be worked on
* @pin: gpio pin number within the device
* @state: value used to modify the state of the specified pin
*
* This function reads the state of the specified pin of the GPIO device, mask
* with the capture state of GPIO pin, and update pin of GPIO device.
*
* Return: None.
*/
static void modepin_gpio_set_value(struct gpio_chip *chip, unsigned int pin,
int state)
{
u32 bootpin_val = 0;
int ret;
zynqmp_pm_bootmode_read(&bootpin_val);
/* Configure pin as an output by set bit [0:3] */
bootpin_val |= BIT(pin);
if (state)
bootpin_val |= BIT(pin + 8);
else
bootpin_val &= ~BIT(pin + 8);
/* Configure bootpin value */
ret = zynqmp_pm_bootmode_write(bootpin_val);
if (ret)
pr_err("modepin: set value error %d for pin %d\n", ret, pin);
}
/**
* modepin_gpio_dir_in - Set the direction of the specified GPIO pin as input
* @chip: gpio_chip instance to be worked on
* @pin: gpio pin number within the device
*
* Return: 0 always
*/
static int modepin_gpio_dir_in(struct gpio_chip *chip, unsigned int pin)
{
return 0;
}
/**
* modepin_gpio_dir_out - Set the direction of the specified GPIO pin as output
* @chip: gpio_chip instance to be worked on
* @pin: gpio pin number within the device
* @state: value to be written to specified pin
*
* Return: 0 always
*/
static int modepin_gpio_dir_out(struct gpio_chip *chip, unsigned int pin,
int state)
{
return 0;
}
/**
* modepin_gpio_probe - Initialization method for modepin_gpio
* @pdev: platform device instance
*
* Return: 0 on success, negative error otherwise.
*/
static int modepin_gpio_probe(struct platform_device *pdev)
{
struct gpio_chip *chip;
int status;
chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
platform_set_drvdata(pdev, chip);
/* configure the gpio chip */
chip->base = -1;
chip->ngpio = MODE_PINS;
chip->owner = THIS_MODULE;
chip->parent = &pdev->dev;
chip->get = modepin_gpio_get_value;
chip->set = modepin_gpio_set_value;
chip->direction_input = modepin_gpio_dir_in;
chip->direction_output = modepin_gpio_dir_out;
chip->label = dev_name(&pdev->dev);
/* modepin gpio registration */
status = devm_gpiochip_add_data(&pdev->dev, chip, chip);
if (status)
return dev_err_probe(&pdev->dev, status,
"Failed to add GPIO chip\n");
return status;
}
static const struct of_device_id modepin_platform_id[] = {
{ .compatible = "xlnx,zynqmp-gpio-modepin", },
{ }
};
static struct platform_driver modepin_platform_driver = {
.driver = {
.name = "modepin-gpio",
.of_match_table = modepin_platform_id,
},
.probe = modepin_gpio_probe,
};
module_platform_driver(modepin_platform_driver);
MODULE_AUTHOR("Piyush Mehta <piyush.mehta@xilinx.com>");
MODULE_DESCRIPTION("ZynqMP Boot PS_MODE Configuration");
MODULE_LICENSE("GPL v2");

1
drivers/net/ethernet/mellanox/mlxbf_gige/Makefile
View File

@ -3,7 +3,6 @@
obj-$(CONFIG_MLXBF_GIGE) += mlxbf_gige.o
mlxbf_gige-y := mlxbf_gige_ethtool.o \
mlxbf_gige_gpio.o \
mlxbf_gige_intr.o \
mlxbf_gige_main.o \
mlxbf_gige_mdio.o \

12
drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h
View File

@ -51,11 +51,6 @@
#define MLXBF_GIGE_ERROR_INTR_IDX 0
#define MLXBF_GIGE_RECEIVE_PKT_INTR_IDX 1
#define MLXBF_GIGE_LLU_PLU_INTR_IDX 2
#define MLXBF_GIGE_PHY_INT_N 3
#define MLXBF_GIGE_MDIO_DEFAULT_PHY_ADDR 0x3
#define MLXBF_GIGE_DEFAULT_PHY_INT_GPIO 12
struct mlxbf_gige_stats {
u64 hw_access_errors;
@ -81,11 +76,7 @@ struct mlxbf_gige {
struct platform_device *pdev;
void __iomem *mdio_io;
struct mii_bus *mdiobus;
void __iomem *gpio_io;
struct irq_domain *irqdomain;
u32 phy_int_gpio_mask;
spinlock_t lock; /* for packet processing indices */
spinlock_t gpio_lock; /* for GPIO bus access */
u16 rx_q_entries;
u16 tx_q_entries;
u64 *tx_wqe_base;
@ -184,7 +175,4 @@ int mlxbf_gige_poll(struct napi_struct *napi, int budget);
extern const struct ethtool_ops mlxbf_gige_ethtool_ops;
void mlxbf_gige_update_tx_wqe_next(struct mlxbf_gige *priv);
int mlxbf_gige_gpio_init(struct platform_device *pdev, struct mlxbf_gige *priv);
void mlxbf_gige_gpio_free(struct mlxbf_gige *priv);
#endif /* !defined(__MLXBF_GIGE_H__) */

212
drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_gpio.c
View File

@ -1,212 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause
/* Initialize and handle GPIO interrupt triggered by INT_N PHY signal.
* This GPIO interrupt triggers the PHY state machine to bring the link
* up/down.
*
* Copyright (C) 2021 NVIDIA CORPORATION & AFFILIATES
*/
#include <linux/acpi.h>
#include <linux/bitfield.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/irqreturn.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include "mlxbf_gige.h"
#include "mlxbf_gige_regs.h"
#define MLXBF_GIGE_GPIO_CAUSE_FALL_EN 0x48
#define MLXBF_GIGE_GPIO_CAUSE_OR_CAUSE_EVTEN0 0x80
#define MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0 0x94
#define MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE 0x98
static void mlxbf_gige_gpio_enable(struct mlxbf_gige *priv)
{
unsigned long flags;
u32 val;
spin_lock_irqsave(&priv->gpio_lock, flags);
val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE);
val |= priv->phy_int_gpio_mask;
writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE);
/* The INT_N interrupt level is active low.
* So enable cause fall bit to detect when GPIO
* state goes low.
*/
val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_FALL_EN);
val |= priv->phy_int_gpio_mask;
writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_FALL_EN);
/* Enable PHY interrupt by setting the priority level */
val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0);
val |= priv->phy_int_gpio_mask;
writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0);
spin_unlock_irqrestore(&priv->gpio_lock, flags);
}
static void mlxbf_gige_gpio_disable(struct mlxbf_gige *priv)
{
unsigned long flags;
u32 val;
spin_lock_irqsave(&priv->gpio_lock, flags);
val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0);
val &= ~priv->phy_int_gpio_mask;
writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0);
spin_unlock_irqrestore(&priv->gpio_lock, flags);
}
static irqreturn_t mlxbf_gige_gpio_handler(int irq, void *ptr)
{
struct mlxbf_gige *priv;
u32 val;
priv = ptr;
/* Check if this interrupt is from PHY device.
* Return if it is not.
*/
val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CAUSE_EVTEN0);
if (!(val & priv->phy_int_gpio_mask))
return IRQ_NONE;
/* Clear interrupt when done, otherwise, no further interrupt
* will be triggered.
*/
val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE);
val |= priv->phy_int_gpio_mask;
writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE);
generic_handle_irq(priv->phy_irq);
return IRQ_HANDLED;
}
static void mlxbf_gige_gpio_mask(struct irq_data *irqd)
{
struct mlxbf_gige *priv = irq_data_get_irq_chip_data(irqd);
mlxbf_gige_gpio_disable(priv);
}
static void mlxbf_gige_gpio_unmask(struct irq_data *irqd)
{
struct mlxbf_gige *priv = irq_data_get_irq_chip_data(irqd);
mlxbf_gige_gpio_enable(priv);
}
static struct irq_chip mlxbf_gige_gpio_chip = {
.name = "mlxbf_gige_phy",
.irq_mask = mlxbf_gige_gpio_mask,
.irq_unmask = mlxbf_gige_gpio_unmask,
};
static int mlxbf_gige_gpio_domain_map(struct irq_domain *d,
unsigned int irq,
irq_hw_number_t hwirq)
{
irq_set_chip_data(irq, d->host_data);
irq_set_chip_and_handler(irq, &mlxbf_gige_gpio_chip, handle_simple_irq);
irq_set_noprobe(irq);
return 0;
}
static const struct irq_domain_ops mlxbf_gige_gpio_domain_ops = {
.map = mlxbf_gige_gpio_domain_map,
.xlate = irq_domain_xlate_twocell,
};
#ifdef CONFIG_ACPI
static int mlxbf_gige_gpio_resources(struct acpi_resource *ares,
void *data)
{
struct acpi_resource_gpio *gpio;
u32 *phy_int_gpio = data;
if (ares->type == ACPI_RESOURCE_TYPE_GPIO) {
gpio = &ares->data.gpio;
*phy_int_gpio = gpio->pin_table[0];
}
return 1;
}
#endif
void mlxbf_gige_gpio_free(struct mlxbf_gige *priv)
{
irq_dispose_mapping(priv->phy_irq);
irq_domain_remove(priv->irqdomain);
}
int mlxbf_gige_gpio_init(struct platform_device *pdev,
struct mlxbf_gige *priv)
{
struct device *dev = &pdev->dev;
struct resource *res;
u32 phy_int_gpio = 0;
int ret;
LIST_HEAD(resources);
res = platform_get_resource(pdev, IORESOURCE_MEM, MLXBF_GIGE_RES_GPIO0);
if (!res)
return -ENODEV;
priv->gpio_io = devm_ioremap(dev, res->start, resource_size(res));
if (!priv->gpio_io)
return -ENOMEM;
#ifdef CONFIG_ACPI
ret = acpi_dev_get_resources(ACPI_COMPANION(dev),
&resources, mlxbf_gige_gpio_resources,
&phy_int_gpio);
acpi_dev_free_resource_list(&resources);
if (ret < 0 || !phy_int_gpio) {
dev_err(dev, "Error retrieving the gpio phy pin");
return -EINVAL;
}
#endif
priv->phy_int_gpio_mask = BIT(phy_int_gpio);
mlxbf_gige_gpio_disable(priv);
priv->hw_phy_irq = platform_get_irq(pdev, MLXBF_GIGE_PHY_INT_N);
priv->irqdomain = irq_domain_add_simple(NULL, 1, 0,
&mlxbf_gige_gpio_domain_ops,
priv);
if (!priv->irqdomain) {
dev_err(dev, "Failed to add IRQ domain\n");
return -ENOMEM;
}
priv->phy_irq = irq_create_mapping(priv->irqdomain, 0);
if (!priv->phy_irq) {
irq_domain_remove(priv->irqdomain);
priv->irqdomain = NULL;
dev_err(dev, "Error mapping PHY IRQ\n");
return -EINVAL;
}
ret = devm_request_irq(dev, priv->hw_phy_irq, mlxbf_gige_gpio_handler,
IRQF_ONESHOT | IRQF_SHARED, "mlxbf_gige_phy", priv);
if (ret) {
dev_err(dev, "Failed to request PHY IRQ");
mlxbf_gige_gpio_free(priv);
return ret;
}
return ret;
}

22
drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c
View File

@ -280,8 +280,8 @@ static int mlxbf_gige_probe(struct platform_device *pdev)
void __iomem *llu_base;
void __iomem *plu_base;
void __iomem *base;
int addr, phy_irq;
u64 control;
int addr;
int err;
base = devm_platform_ioremap_resource(pdev, MLXBF_GIGE_RES_MAC);
@ -316,20 +316,12 @@ static int mlxbf_gige_probe(struct platform_device *pdev)
priv->pdev = pdev;
spin_lock_init(&priv->lock);
spin_lock_init(&priv->gpio_lock);
/* Attach MDIO device */
err = mlxbf_gige_mdio_probe(pdev, priv);
if (err)
return err;
err = mlxbf_gige_gpio_init(pdev, priv);
if (err) {
dev_err(&pdev->dev, "PHY IRQ initialization failed\n");
mlxbf_gige_mdio_remove(priv);
return -ENODEV;
}
priv->base = base;
priv->llu_base = llu_base;
priv->plu_base = plu_base;
@ -350,6 +342,12 @@ static int mlxbf_gige_probe(struct platform_device *pdev)
priv->rx_irq = platform_get_irq(pdev, MLXBF_GIGE_RECEIVE_PKT_INTR_IDX);
priv->llu_plu_irq = platform_get_irq(pdev, MLXBF_GIGE_LLU_PLU_INTR_IDX);
phy_irq = acpi_dev_gpio_irq_get_by(ACPI_COMPANION(&pdev->dev), "phy-gpios", 0);
if (phy_irq < 0) {
dev_err(&pdev->dev, "Error getting PHY irq. Use polling instead");
phy_irq = PHY_POLL;
}
phydev = phy_find_first(priv->mdiobus);
if (!phydev) {
err = -ENODEV;
@ -357,8 +355,8 @@ static int mlxbf_gige_probe(struct platform_device *pdev)
}
addr = phydev->mdio.addr;
priv->mdiobus->irq[addr] = priv->phy_irq;
phydev->irq = priv->phy_irq;
priv->mdiobus->irq[addr] = phy_irq;
phydev->irq = phy_irq;
err = phy_connect_direct(netdev, phydev,
mlxbf_gige_adjust_link,
@ -394,7 +392,6 @@ static int mlxbf_gige_probe(struct platform_device *pdev)
return 0;
out:
mlxbf_gige_gpio_free(priv);
mlxbf_gige_mdio_remove(priv);
return err;
}
@ -405,7 +402,6 @@ static int mlxbf_gige_remove(struct platform_device *pdev)
unregister_netdev(priv->netdev);
phy_disconnect(priv->netdev->phydev);
mlxbf_gige_gpio_free(priv);
mlxbf_gige_mdio_remove(priv);
platform_set_drvdata(pdev, NULL);

14
include/linux/firmware/xlnx-zynqmp.h
View File

@ -72,6 +72,8 @@ enum pm_api_id {
PM_SET_REQUIREMENT = 15,
PM_RESET_ASSERT = 17,
PM_RESET_GET_STATUS = 18,
PM_MMIO_WRITE = 19,
PM_MMIO_READ = 20,
PM_PM_INIT_FINALIZE = 21,
PM_FPGA_LOAD = 22,
PM_FPGA_GET_STATUS = 23,
@ -397,6 +399,8 @@ int zynqmp_pm_ospi_mux_select(u32 dev_id, u32 select);
int zynqmp_pm_reset_assert(const enum zynqmp_pm_reset reset,
const enum zynqmp_pm_reset_action assert_flag);
int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset, u32 *status);
unsigned int zynqmp_pm_bootmode_read(u32 *ps_mode);
int zynqmp_pm_bootmode_write(u32 ps_mode);
int zynqmp_pm_init_finalize(void);
int zynqmp_pm_set_suspend_mode(u32 mode);
int zynqmp_pm_request_node(const u32 node, const u32 capabilities,
@ -532,6 +536,16 @@ static inline int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset,
return -ENODEV;
}
static inline unsigned int zynqmp_pm_bootmode_read(u32 *ps_mode)
{
return -ENODEV;
}
static inline int zynqmp_pm_bootmode_write(u32 ps_mode)
{
return -ENODEV;
}
static inline int zynqmp_pm_init_finalize(void)
{
return -ENODEV;

2
include/linux/spi/max7301.h
View File

@ -31,6 +31,6 @@ struct max7301_platform_data {
u32 input_pullup_active;
};
extern int __max730x_remove(struct device *dev);
extern void __max730x_remove(struct device *dev);
extern int __max730x_probe(struct max7301 *ts);
#endif

27
include/uapi/linux/virtio_gpio.h
View File

@ -5,12 +5,16 @@
#include <linux/types.h>
/* Virtio GPIO Feature bits */
#define VIRTIO_GPIO_F_IRQ 0
/* Virtio GPIO request types */
#define VIRTIO_GPIO_MSG_GET_NAMES 0x0001
#define VIRTIO_GPIO_MSG_GET_DIRECTION 0x0002
#define VIRTIO_GPIO_MSG_SET_DIRECTION 0x0003
#define VIRTIO_GPIO_MSG_GET_VALUE 0x0004
#define VIRTIO_GPIO_MSG_SET_VALUE 0x0005
#define VIRTIO_GPIO_MSG_IRQ_TYPE 0x0006
/* Possible values of the status field */
#define VIRTIO_GPIO_STATUS_OK 0x0
@ -21,11 +25,19 @@
#define VIRTIO_GPIO_DIRECTION_OUT 0x01
#define VIRTIO_GPIO_DIRECTION_IN 0x02
/* Virtio GPIO IRQ types */
#define VIRTIO_GPIO_IRQ_TYPE_NONE 0x00
#define VIRTIO_GPIO_IRQ_TYPE_EDGE_RISING 0x01
#define VIRTIO_GPIO_IRQ_TYPE_EDGE_FALLING 0x02
#define VIRTIO_GPIO_IRQ_TYPE_EDGE_BOTH 0x03
#define VIRTIO_GPIO_IRQ_TYPE_LEVEL_HIGH 0x04
#define VIRTIO_GPIO_IRQ_TYPE_LEVEL_LOW 0x08
struct virtio_gpio_config {
__le16 ngpio;
__u8 padding[2];
__le32 gpio_names_size;
} __packed;
};
/* Virtio GPIO Request / Response */
struct virtio_gpio_request {
@ -44,4 +56,17 @@ struct virtio_gpio_response_get_names {
__u8 value[];
};
/* Virtio GPIO IRQ Request / Response */
struct virtio_gpio_irq_request {
__le16 gpio;
};
struct virtio_gpio_irq_response {
__u8 status;
};
/* Possible values of the interrupt status field */
#define VIRTIO_GPIO_IRQ_STATUS_INVALID 0x0
#define VIRTIO_GPIO_IRQ_STATUS_VALID 0x1
#endif /* _LINUX_VIRTIO_GPIO_H */