2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-11-25 11:04:01 +08:00

Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2018-04-24

This series contains fixes to ixgbevf, igb and ice drivers.

Colin Ian King fixes the return value on error for the new XDP support
that went into ixgbevf for 4.17.

Vinicius provides a fix for queue 0 for igb, which was not receiving all
the credits it needed when QAV mode was enabled.

Anirudh provides several fixes for the new ice driver, starting with
properly initializing num_nodes_added to zero.  Fixed up a code comment
to better reflect what is really going on in the code.  Fixed how to
detect if an OICR interrupt has occurred to a more reliable method.

Md Fahad fixes the ice driver to allocate the right amount of memory
when reading and storing the devices MAC addresses.  The device can have
up to 2 MAC addresses (LAN and WoL), while WoL is currently not
supported, we need to ensure it can be properly handled when support is
added.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2018-04-24 16:17:59 -04:00
commit d19efb729f
7 changed files with 37 additions and 16 deletions

View File

@ -586,7 +586,7 @@ struct ice_sw_rule_lg_act {
#define ICE_LG_ACT_MIRROR_VSI_ID_S 3
#define ICE_LG_ACT_MIRROR_VSI_ID_M (0x3FF << ICE_LG_ACT_MIRROR_VSI_ID_S)
/* Action type = 5 - Large Action */
/* Action type = 5 - Generic Value */
#define ICE_LG_ACT_GENERIC 0x5
#define ICE_LG_ACT_GENERIC_VALUE_S 3
#define ICE_LG_ACT_GENERIC_VALUE_M (0xFFFF << ICE_LG_ACT_GENERIC_VALUE_S)

View File

@ -78,6 +78,7 @@ ice_aq_manage_mac_read(struct ice_hw *hw, void *buf, u16 buf_size,
struct ice_aq_desc desc;
enum ice_status status;
u16 flags;
u8 i;
cmd = &desc.params.mac_read;
@ -98,8 +99,16 @@ ice_aq_manage_mac_read(struct ice_hw *hw, void *buf, u16 buf_size,
return ICE_ERR_CFG;
}
ether_addr_copy(hw->port_info->mac.lan_addr, resp->mac_addr);
ether_addr_copy(hw->port_info->mac.perm_addr, resp->mac_addr);
/* A single port can report up to two (LAN and WoL) addresses */
for (i = 0; i < cmd->num_addr; i++)
if (resp[i].addr_type == ICE_AQC_MAN_MAC_ADDR_TYPE_LAN) {
ether_addr_copy(hw->port_info->mac.lan_addr,
resp[i].mac_addr);
ether_addr_copy(hw->port_info->mac.perm_addr,
resp[i].mac_addr);
break;
}
return 0;
}
@ -464,9 +473,12 @@ enum ice_status ice_init_hw(struct ice_hw *hw)
if (status)
goto err_unroll_sched;
/* Get port MAC information */
mac_buf_len = sizeof(struct ice_aqc_manage_mac_read_resp);
mac_buf = devm_kzalloc(ice_hw_to_dev(hw), mac_buf_len, GFP_KERNEL);
/* Get MAC information */
/* A single port can report up to two (LAN and WoL) addresses */
mac_buf = devm_kcalloc(ice_hw_to_dev(hw), 2,
sizeof(struct ice_aqc_manage_mac_read_resp),
GFP_KERNEL);
mac_buf_len = 2 * sizeof(struct ice_aqc_manage_mac_read_resp);
if (!mac_buf) {
status = ICE_ERR_NO_MEMORY;

View File

@ -121,8 +121,6 @@
#define PFINT_FW_CTL_CAUSE_ENA_S 30
#define PFINT_FW_CTL_CAUSE_ENA_M BIT(PFINT_FW_CTL_CAUSE_ENA_S)
#define PFINT_OICR 0x0016CA00
#define PFINT_OICR_INTEVENT_S 0
#define PFINT_OICR_INTEVENT_M BIT(PFINT_OICR_INTEVENT_S)
#define PFINT_OICR_HLP_RDY_S 14
#define PFINT_OICR_HLP_RDY_M BIT(PFINT_OICR_HLP_RDY_S)
#define PFINT_OICR_CPM_RDY_S 15

View File

@ -1722,9 +1722,6 @@ static irqreturn_t ice_misc_intr(int __always_unused irq, void *data)
oicr = rd32(hw, PFINT_OICR);
ena_mask = rd32(hw, PFINT_OICR_ENA);
if (!(oicr & PFINT_OICR_INTEVENT_M))
goto ena_intr;
if (oicr & PFINT_OICR_GRST_M) {
u32 reset;
/* we have a reset warning */
@ -1782,7 +1779,6 @@ static irqreturn_t ice_misc_intr(int __always_unused irq, void *data)
}
ret = IRQ_HANDLED;
ena_intr:
/* re-enable interrupt causes that are not handled during this pass */
wr32(hw, PFINT_OICR_ENA, ena_mask);
if (!test_bit(__ICE_DOWN, pf->state)) {

View File

@ -751,14 +751,14 @@ ice_sched_add_nodes_to_layer(struct ice_port_info *pi,
u16 num_added = 0;
u32 temp;
*num_nodes_added = 0;
if (!num_nodes)
return status;
if (!parent || layer < hw->sw_entry_point_layer)
return ICE_ERR_PARAM;
*num_nodes_added = 0;
/* max children per node per layer */
max_child_nodes =
le16_to_cpu(hw->layer_info[parent->tx_sched_layer].max_children);

View File

@ -1700,7 +1700,22 @@ static void igb_configure_cbs(struct igb_adapter *adapter, int queue,
WARN_ON(hw->mac.type != e1000_i210);
WARN_ON(queue < 0 || queue > 1);
if (enable) {
if (enable || queue == 0) {
/* i210 does not allow the queue 0 to be in the Strict
* Priority mode while the Qav mode is enabled, so,
* instead of disabling strict priority mode, we give
* queue 0 the maximum of credits possible.
*
* See section 8.12.19 of the i210 datasheet, "Note:
* Queue0 QueueMode must be set to 1b when
* TransmitMode is set to Qav."
*/
if (queue == 0 && !enable) {
/* max "linkspeed" idleslope in kbps */
idleslope = 1000000;
hicredit = ETH_FRAME_LEN;
}
set_tx_desc_fetch_prio(hw, queue, TX_QUEUE_PRIO_HIGH);
set_queue_mode(hw, queue, QUEUE_MODE_STREAM_RESERVATION);

View File

@ -3420,7 +3420,7 @@ static int ixgbevf_setup_all_tx_resources(struct ixgbevf_adapter *adapter)
if (!err)
continue;
hw_dbg(&adapter->hw, "Allocation for XDP Queue %u failed\n", j);
break;
goto err_setup_tx;
}
return 0;