renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-05 03:44:03 +08:00
Code

ARM: SoC cleanups for v4.1

Browse Source 
We've got a fairly large cleanup branch this time. The bulk of this is removal
 of non-DT platforms of several flavors:
 
 - Atmel at91 platforms go full-DT, with removal of remaining board-file based
   support
 - OMAP removes legacy board files for three more platforms
 - Removal of non-DT mach-msm, newer Qualcomm platforms now live in mach-qcom
 - Freescale i.MX25 also removes non-DT platform support
 
 Most of the rest of the changes here are fallout from the above, i.e. for
 example removal of drivers that now lack platforms, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVNzI3AAoJEIwa5zzehBx3ePwQAJKb4Mf72/4iiKb4dbVcooQN
 EiZ84fwWiWD6Mww/3A76xVnz/b7JWmB3vwW0b4fcbvzubmOjnROBmZgCWeNy4ZTv
 dOZc3/9jK7OrlwvpFBeZykQwHcbz+550+m3WxmLft1oqH/7BA1k5aunwYtFB96ii
 5Owi4Cy9OmxEyALQAvzktFaJdI7J66LNb+i30r5zIZHlkVooeF3UyadndiswUP2o
 EBzCE8UPqRi5kV6FuwVyf4MZaV28FWoglTqdx9OxogcTnKNFT6RlHQ39q/iPu348
 Wkh4kOryVy7Rlab1K4wQRpBoOwkonKDV73u2H2ifRFj7V9ZAdjibK8pgKn3kjkba
 bJkwHIqlqtqqqjj2Hh93wl+8hKSypoLXO9tagPWYBiLtFXCH/+EVsihWYpAc/A5E
 pUS6hJrJyXKJouwwsXu6459zP0ieqhvpbQG72xs9PRimAfAdSTulSTzdI/dMh42Q
 pwYkmvh+ReY3Ll4MeCzu7+eCIY0qAKsor48W1ImuziwQhg2lZj16qWtA4YdPk3+O
 N8ckyaaFg663PAfsZgBx1qTgxw5v0ec2k68/iEVGS5mUJCgcWxFvR95chTDIxQXq
 ZmJ+SuMFyLB/2zVSiGU96L1PQTcUkxJJ8LVB3qNp6KlYT7qUSsgAU+qYveFlUh+p
 X8MVsSVh8n1MTNepsLij
 =BV8A
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "We've got a fairly large cleanup branch this time.  The bulk of this
  is removal of non-DT platforms of several flavors:

   - Atmel at91 platforms go full-DT, with removal of remaining
     board-file based support

   - OMAP removes legacy board files for three more platforms

   - removal of non-DT mach-msm, newer Qualcomm platforms now live in
     mach-qcom

   - Freescale i.MX25 also removes non-DT platform support"

Most of the rest of the changes here are fallout from the above, i.e. for
example removal of drivers that now lack platforms, etc.

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits)
  mmc: Remove msm_sdcc driver
  gpio: Remove gpio-msm-v1 driver
  ARM: Remove mach-msm and associated ARM architecture code
  ARM: shmobile: cpuidle: Remove the pointless default driver
  ARM: davinci: dm646x: Add interrupt resource for McASPs
  ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x
  ARM: davinci: dm646x: Clean up the McASP DMA resources
  ARM: davinci: devices-da8xx: Add support for McASP2 on da830
  ARM: davinci: devices-da8xx: Clean up and correct the McASP device creation
  ARM: davinci: devices-da8xx: Add interrupt resource to McASP structs
  ARM: davinci: devices-da8xx: Add resource name for the McASP DMA request
  ARM: OMAP2+: Remove legacy support for omap3 TouchBook
  ARM: OMAP3: Remove legacy support for devkit8000
  ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board
  ARM: shmobile: Consolidate the pm code for R-Car Gen2
  ARM: shmobile: r8a7791: Correct SYSCIER value
  ARM: shmobile: r8a7790: Correct SYSCIER value
  ARM: at91: remove old setup
  ARM: at91: sama5d4: remove useless map_io
  ARM: at91: sama5 use SoC detection infrastructure
  ...
This commit is contained in:
Linus Torvalds 2015-04-22 09:04:39 -07:00
commit d0440c59f5
170 changed files with 1016 additions and 16658 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/arm/00-INDEX
View File

@ -10,8 +10,6 @@ IXP4xx
- Intel IXP4xx Network processor.
Makefile
- Build sourcefiles as part of the Documentation-build for arm
msm/
- MSM specific documentation
Netwinder
- Netwinder specific documentation
Porting

176
Documentation/arm/msm/gpiomux.txt
View File

@ -1,176 +0,0 @@
This document provides an overview of the msm_gpiomux interface, which
is used to provide gpio pin multiplexing and configuration on mach-msm
targets.
History
=======
The first-generation API for gpio configuration & multiplexing on msm
is the function gpio_tlmm_config(). This function has a few notable
shortcomings, which led to its deprecation and replacement by gpiomux:
The 'disable' parameter: Setting the second parameter to
gpio_tlmm_config to GPIO_CFG_DISABLE tells the peripheral
processor in charge of the subsystem to perform a look-up into a
low-power table and apply the low-power/sleep setting for the pin.
As the msm family evolved this became problematic. Not all pins
have sleep settings, not all peripheral processors will accept requests
to apply said sleep settings, and not all msm targets have their gpio
subsystems managed by a peripheral processor. In order to get consistent
behavior on all targets, drivers are forced to ignore this parameter,
rendering it useless.
The 'direction' flag: for all mux-settings other than raw-gpio (0),
the output-enable bit of a gpio is hard-wired to a known
input (usually VDD or ground). For those settings, the direction flag
is meaningless at best, and deceptive at worst. In addition, using the
direction flag to change output-enable (OE) directly can cause trouble in
gpiolib, which has no visibility into gpio direction changes made
in this way. Direction control in gpio mode should be made through gpiolib.
Key Features of gpiomux
=======================
- A consistent interface across all generations of msm. Drivers can expect
the same results on every target.
- gpiomux plays nicely with gpiolib. Functions that should belong to gpiolib
are left to gpiolib and not duplicated here. gpiomux is written with the
intent that gpio_chips will call gpiomux reference-counting methods
from their request() and free() hooks, providing full integration.
- Tabular configuration. Instead of having to call gpio_tlmm_config
hundreds of times, gpio configuration is placed in a single table.
- Per-gpio sleep. Each gpio is individually reference counted, allowing only
those lines which are in use to be put in high-power states.
- 0 means 'do nothing': all flags are designed so that the default memset-zero
equates to a sensible default of 'no configuration', preventing users
from having to provide hundreds of 'no-op' configs for unused or
unwanted lines.
Usage
=====
To use gpiomux, provide configuration information for relevant gpio lines
in the msm_gpiomux_configs table. Since a 0 equates to "unconfigured",
only those lines to be managed by gpiomux need to be specified. Here
is a completely fictional example:
struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
[12] = {
.active = GPIOMUX_VALID | GPIOMUX_DRV_8MA | GPIOMUX_FUNC_1,
.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
},
[34] = {
.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
},
};
To indicate that a gpio is in use, call msm_gpiomux_get() to increase
its reference count. To decrease the reference count, call msm_gpiomux_put().
The effect of this configuration is as follows:
When the system boots, gpios 12 and 34 will be initialized with their
'suspended' configurations. All other gpios, which were left unconfigured,
will not be touched.
When msm_gpiomux_get() is called on gpio 12 to raise its reference count
above 0, its active configuration will be applied. Since no other gpio
line has a valid active configuration, msm_gpiomux_get() will have no
effect on any other line.
When msm_gpiomux_put() is called on gpio 12 or 34 to drop their reference
count to 0, their suspended configurations will be applied.
Since no other gpio line has a valid suspended configuration, no other
gpio line will be effected by msm_gpiomux_put(). Since gpio 34 has no valid
active configuration, this is effectively a no-op for gpio 34 as well,
with one small caveat, see the section "About Output-Enable Settings".
All of the GPIOMUX_VALID flags may seem like unnecessary overhead, but
they address some important issues. As unused entries (all those
except 12 and 34) are zero-filled, gpiomux needs a way to distinguish
the used fields from the unused. In addition, the all-zero pattern
is a valid configuration! Therefore, gpiomux defines an additional bit
which is used to indicate when a field is used. This has the pleasant
side-effect of allowing calls to msm_gpiomux_write to use '0' to indicate
that a value should not be changed:
msm_gpiomux_write(0, GPIOMUX_VALID, 0);
replaces the active configuration of gpio 0 with an all-zero configuration,
but leaves the suspended configuration as it was.
Static Configurations
=====================
To install a static configuration, which is applied at boot and does
not change after that, install a configuration with a suspended component
but no active component, as in the previous example:
[34] = {
.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
},
The suspended setting is applied during boot, and the lack of any valid
active setting prevents any other setting from being applied at runtime.
If other subsystems attempting to access the line is a concern, one could
*really* anchor the configuration down by calling msm_gpiomux_get on the
line at initialization to move the line into active mode. With the line
held, it will never be re-suspended, and with no valid active configuration,
no new configurations will be applied.
But then, if having other subsystems grabbing for the line is truly a concern,
it should be reserved with gpio_request instead, which carries an implicit
msm_gpiomux_get.
gpiomux and gpiolib
===================
It is expected that msm gpio_chips will call msm_gpiomux_get() and
msm_gpiomux_put() from their request and free hooks, like this fictional
example:
static int request(struct gpio_chip *chip, unsigned offset)
{
return msm_gpiomux_get(chip->base + offset);
}
static void free(struct gpio_chip *chip, unsigned offset)
{
msm_gpiomux_put(chip->base + offset);
}
...somewhere in a gpio_chip declaration...
.request = request,
.free = free,
This provides important functionality:
- It guarantees that a gpio line will have its 'active' config applied
when the line is requested, and will not be suspended while the line
remains requested; and
- It guarantees that gpio-direction settings from gpiolib behave sensibly.
See "About Output-Enable Settings."
This mechanism allows for "auto-request" of gpiomux lines via gpiolib
when it is suitable. Drivers wishing more exact control are, of course,
free to also use msm_gpiomux_set and msm_gpiomux_get.
About Output-Enable Settings
============================
Some msm targets do not have the ability to query the current gpio
configuration setting. This means that changes made to the output-enable
(OE) bit by gpiolib cannot be consistently detected and preserved by gpiomux.
Therefore, when gpiomux applies a configuration setting, any direction
settings which may have been applied by gpiolib are lost and the default
input settings are re-applied.
For this reason, drivers should not assume that gpio direction settings
continue to hold if they free and then re-request a gpio. This seems like
common sense - after all, anybody could have obtained the line in the
meantime - but it needs saying.
This also means that calls to msm_gpiomux_write will reset the OE bit,
which means that if the gpio line is held by a client of gpiolib and
msm_gpiomux_write is called, the direction setting has been lost and
gpiolib's internal state has been broken.
Release gpio lines before reconfiguring them.

3
Documentation/devicetree/bindings/serial/atmel-usart.txt
View File

@ -1,9 +1,10 @@
* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
Required properties:
- compatible: Should be "atmel,<chip>-usart"
- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
The compatible <chip> indicated will be the first SoC to support an
additional mode or an USART new feature.
For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt
- clock-names: tuple listing input clock names.

20
MAINTAINERS
View File

@ -1261,22 +1261,6 @@ L: openmoko-kernel@lists.openmoko.org (subscribers-only)
W: http://wiki.openmoko.org/wiki/Neo_FreeRunner
S: Supported
ARM/QUALCOMM MSM MACHINE SUPPORT
M: David Brown <davidb@codeaurora.org>
M: Daniel Walker <dwalker@fifo99.com>
M: Bryan Huntsman <bryanh@codeaurora.org>
L: linux-arm-msm@vger.kernel.org
F: arch/arm/mach-msm/
F: drivers/video/fbdev/msm/
F: drivers/mmc/host/msm_sdcc.c
F: drivers/mmc/host/msm_sdcc.h
F: drivers/tty/serial/msm_serial.h
F: drivers/tty/serial/msm_serial.c
F: drivers/*/pm8???-*
F: drivers/mfd/ssbi.c
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
S: Maintained
ARM/TOSA MACHINE SUPPORT
M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
M: Dirk Opfer <dirk@opfer-online.de>
@ -1334,6 +1318,10 @@ L: linux-soc@vger.kernel.org
S: Maintained
F: arch/arm/mach-qcom/
F: drivers/soc/qcom/
F: drivers/tty/serial/msm_serial.h
F: drivers/tty/serial/msm_serial.c
F: drivers/*/pm8???-*
F: drivers/mfd/ssbi.c
T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
ARM/RADISYS ENP2611 MACHINE SUPPORT

16
arch/arm/Kconfig
View File

@ -367,9 +367,9 @@ config ARCH_AT91
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select IRQ_DOMAIN
select NEED_MACH_IO_H if PCCARD
select PINCTRL
select PINCTRL_AT91
select SOC_BUS
select USE_OF
help
This enables support for systems based on Atmel
@ -632,18 +632,6 @@ config ARCH_PXA
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
config ARCH_MSM
bool "Qualcomm MSM (non-multiplatform)"
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLK
select GENERIC_CLOCKEVENTS
help
Support for Qualcomm MSM/QSD based systems. This runs on the
apps processor of the MSM/QSD and depends on a shared memory
interface to the modem processor which runs the baseband
stack and controls some vital subsystems
(clock and power control, etc).
config ARCH_SHMOBILE_LEGACY
bool "Renesas ARM SoCs (non-multiplatform)"
select ARCH_SHMOBILE
@ -897,8 +885,6 @@ source "arch/arm/mach-ks8695/Kconfig"
source "arch/arm/mach-meson/Kconfig"
source "arch/arm/mach-msm/Kconfig"
source "arch/arm/mach-moxart/Kconfig"
source "arch/arm/mach-mv78xx0/Kconfig"

31
arch/arm/Kconfig.debug
View File

@ -448,25 +448,6 @@ choice
Say Y here if you want kernel low-level debugging support
on MMP UART3.
config DEBUG_MSM_UART
bool "Kernel low-level debugging messages via MSM UART"
depends on ARCH_MSM
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM devices.
ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT #
MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1
MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2
MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3
MSM7X30 0xaca00000 0xe1000000 UART1
MSM7X30 0xacb00000 0xe1000000 UART2
MSM7X30 0xacc00000 0xe1000000 UART3
Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
options based on your needs.
config DEBUG_QCOM_UARTDM
bool "Kernel low-level debugging messages via QCOM UARTDM"
depends on ARCH_QCOM
@ -806,7 +787,7 @@ choice
via SCIF2 on Renesas R-Car H1 (R8A7779).
config DEBUG_RCAR_GEN2_SCIF0
bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793)"
bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793"
depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793
help
Say Y here if you want kernel low-level debugging support
@ -1295,7 +1276,7 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX6SL_UART || \
DEBUG_IMX6SX_UART
default "debug/ks8695.S" if DEBUG_KS8695_UART
default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
default "debug/msm.S" if DEBUG_QCOM_UARTDM
default "debug/netx.S" if DEBUG_NETX_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
@ -1388,7 +1369,6 @@ config DEBUG_UART_PHYS
default 0x80230000 if DEBUG_PICOXCELL_UART
default 0x808c0000 if ARCH_EP93XX
default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
default 0xa9a00000 if DEBUG_MSM_UART
default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
default 0xc0013000 if DEBUG_U300_UART
@ -1433,7 +1413,7 @@ config DEBUG_UART_PHYS
DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_MSM_UART || DEBUG_NETX_UART || \
DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
@ -1446,7 +1426,6 @@ config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
default 0xe0000a00 if DEBUG_NETX_UART
default 0xe0010fe0 if ARCH_RPC
default 0xe1000000 if DEBUG_MSM_UART
default 0xf0000be0 if ARCH_EBSA110
default 0xf0010000 if DEBUG_ASM9260_UART
default 0xf01fb000 if DEBUG_NOMADIK_UART
@ -1526,7 +1505,7 @@ config DEBUG_UART_VIRT
default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_MSM_UART || DEBUG_NETX_UART || \
DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
@ -1556,7 +1535,7 @@ config DEBUG_UART_8250_FLOW_CONTROL
config DEBUG_UNCOMPRESS
bool
depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG
depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG
default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
(!DEBUG_TEGRA_UART || !ZBOOT_ROM)
help

2
arch/arm/Makefile
View File

@ -136,7 +136,6 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000
ifeq ($(CONFIG_ARCH_SA1100),y)
textofs-$(CONFIG_SA1111) := 0x00208000
endif
textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
@ -171,7 +170,6 @@ machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
machine-$(CONFIG_ARCH_MESON) += meson
machine-$(CONFIG_ARCH_MMP) += mmp
machine-$(CONFIG_ARCH_MOXART) += moxart
machine-$(CONFIG_ARCH_MSM) += msm
machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
machine-$(CONFIG_ARCH_MVEBU) += mvebu
machine-$(CONFIG_ARCH_MXC) += imx

2
arch/arm/boot/dts/at91rm9200.dtsi
View File

@ -830,7 +830,7 @@
};
dbgu: serial@fffff200 {
compatible = "atmel,at91rm9200-usart";
compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";

2
arch/arm/boot/dts/at91sam9260.dtsi
View File

@ -753,7 +753,7 @@
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";

2
arch/arm/boot/dts/at91sam9261.dtsi
View File

@ -276,7 +276,7 @@
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";

2
arch/arm/boot/dts/at91sam9263.dtsi
View File

@ -762,7 +762,7 @@
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";

2
arch/arm/boot/dts/at91sam9g45.dtsi
View File

@ -893,7 +893,7 @@
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";

2
arch/arm/boot/dts/at91sam9n12.dtsi
View File

@ -757,7 +757,7 @@
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";

2
arch/arm/boot/dts/at91sam9rl.dtsi
View File

@ -377,7 +377,7 @@
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";

2
arch/arm/boot/dts/at91sam9x5.dtsi
View File

@ -860,7 +860,7 @@
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";

2
arch/arm/boot/dts/sama5d3.dtsi
View File

@ -439,7 +439,7 @@
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,

2
arch/arm/boot/dts/sama5d4.dtsi
View File

@ -1064,7 +1064,7 @@
};
dbgu: serial@fc069000 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfc069000 0x200>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";

3
arch/arm/configs/imx_v4_v5_defconfig
View File

@ -24,9 +24,8 @@ CONFIG_ARCH_MXC=y
CONFIG_MACH_SCB9328=y
CONFIG_MACH_APF9328=y
CONFIG_MACH_MX21ADS=y
CONFIG_MACH_MX25_3DS=y
CONFIG_MACH_EUKREA_CPUIMX25SD=y
CONFIG_MACH_IMX25_DT=y
CONFIG_SOC_IMX25=y
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_IMX27_VISSTRIM_M10=y

121
arch/arm/configs/msm_defconfig
View File

@ -1,121 +0,0 @@
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_MSM=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_CLEANCACHE=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_CFG80211=y
CONFIG_RFKILL=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
# CONFIG_USB_NET_ZAURUS is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_MOUSE_PS2 is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_THERMAL=y
CONFIG_REGULATOR=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_FB=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_ACM=y
CONFIG_USB_SERIAL=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_VBUS_DRAW=500
CONFIG_RTC_CLASS=y
CONFIG_STAGING=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT4_FS=y
CONFIG_FUSE_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_CIFS=y
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_TIMER_STATS=y

2
arch/arm/configs/multi_v5_defconfig
View File

@ -13,7 +13,7 @@ CONFIG_ARCH_MVEBU=y
CONFIG_MACH_KIRKWOOD=y
CONFIG_MACH_NETXBIG=y
CONFIG_ARCH_MXC=y
CONFIG_MACH_IMX25_DT=y
CONFIG_SOC_IMX25=y
CONFIG_MACH_IMX27_DT=y
CONFIG_ARCH_U300=y
CONFIG_PCI_MVEBU=y

14
arch/arm/include/debug/msm.S
View File

@ -16,24 +16,17 @@
*/
.macro addruart, rp, rv, tmp
#ifdef CONFIG_DEBUG_UART_PHYS
ldr \rp, =CONFIG_DEBUG_UART_PHYS
ldr \rv, =CONFIG_DEBUG_UART_VIRT
#endif
.endm
.macro senduart, rd, rx
ARM_BE8(rev \rd, \rd )
#ifdef CONFIG_DEBUG_QCOM_UARTDM
@ Write the 1 character to UARTDM_TF
str \rd, [\rx, #0x70]
#else
str \rd, [\rx, #0x0C]
#endif
.endm
.macro waituart, rd, rx
#ifdef CONFIG_DEBUG_QCOM_UARTDM
@ check for TX_EMT in UARTDM_SR
ldr \rd, [\rx, #0x08]
ARM_BE8(rev \rd, \rd )
@ -55,13 +48,6 @@ ARM_BE8(rev \rd, \rd )
str \rd, [\rx, #0x40]
@ UARTDM reg. Read to induce delay
ldr \rd, [\rx, #0x08]
#else
@ wait for TX_READY
1001: ldr \rd, [\rx, #0x08]
ARM_BE8(rev \rd, \rd )
tst \rd, #0x04
beq 1001b
#endif
.endm
.macro busyuart, rd, rx

19
arch/arm/mach-at91/Kconfig
View File

@ -24,7 +24,7 @@ config SOC_SAMA5
select GENERIC_CLOCKEVENTS
select MEMORY
select ATMEL_SDRAMC
select PHYLIB if NETDEVICES
select SRAM if PM
menu "Atmel AT91 System-on-Chip"
@ -81,6 +81,8 @@ config SOC_AT91RM9200
select CPU_ARM920T
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USB_CLK
select MIGHT_HAVE_PCI
select SRAM if PM
config SOC_AT91SAM9
bool "AT91SAM9"
@ -94,6 +96,7 @@ config SOC_AT91SAM9
select HAVE_AT91_UTMI
select HAVE_FB_ATMEL
select MEMORY
select SRAM if PM
help
Select this if you are using one of those Atmel SoC:
AT91SAM9260
@ -116,20 +119,6 @@ endif # SOC_SAM_V4_V5
comment "AT91 Feature Selections"
config AT91_SLOW_CLOCK
bool "Suspend-to-RAM disables main oscillator"
select SRAM
depends on SUSPEND
help
Select this if you want Suspend-to-RAM to save the most power
possible (without powering off the CPU) by disabling the PLLs
and main oscillator so that only the 32 KiHz clock is available.
When only that slow-clock is available, some peripherals lose
functionality. Many can't issue wakeup events unless faster
clocks are available. Some lose their operating state and
need to be completely re-initialized.
config AT91_TIMER_HZ
int "Kernel HZ (jiffies per second)"
range 32 1024

4
arch/arm/mach-at91/Makefile
View File

@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#
obj-y := setup.o
obj-y := soc.o
obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o
@ -13,7 +13,7 @@ obj-$(CONFIG_SOC_SAMA5) += sama5.o
# Power Management
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
obj-$(CONFIG_PM) += pm_suspend.o
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG

31
arch/arm/mach-at91/at91rm9200.c
View File

@ -8,25 +8,22 @@
* Licensed under GPLv2 or later.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/system_misc.h>
#include <mach/at91_st.h>
#include "generic.h"
#include "soc.h"
static const struct at91_soc rm9200_socs[] = {
AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"),
{ /* sentinel */ },
};
static void at91rm9200_restart(enum reboot_mode reboot_mode, const char *cmd)
{
@ -45,15 +42,20 @@ static void __init at91rm9200_dt_timer_init(void)
static void __init at91rm9200_dt_device_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
struct soc_device *soc;
struct device *soc_dev = NULL;
soc = at91_soc_init(rm9200_socs);
if (soc != NULL)
soc_dev = soc_device_to_device(soc);
of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
arm_pm_idle = at91rm9200_idle;
arm_pm_restart = at91rm9200_restart;
at91rm9200_pm_init();
}
static const char *at91rm9200_dt_board_compat[] __initconst = {
"atmel,at91rm9200",
NULL
@ -61,7 +63,6 @@ static const char *at91rm9200_dt_board_compat[] __initconst = {
DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200")
.init_time = at91rm9200_dt_timer_init,
.map_io = at91_map_io,
.init_machine = at91rm9200_dt_device_init,
.dt_compat = at91rm9200_dt_board_compat,
MACHINE_END

78
arch/arm/mach-at91/at91sam9.c
View File

@ -7,29 +7,68 @@
* Licensed under GPLv2 or later.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
#include <asm/system_misc.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/system_misc.h>
#include "generic.h"
#include "soc.h"
static const struct at91_soc at91sam9_socs[] = {
AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL),
AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL),
AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL),
AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL),
AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH,
"at91sam9m11", "at91sam9g45"),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH,
"at91sam9m10", "at91sam9g45"),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH,
"at91sam9g46", "at91sam9g45"),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH,
"at91sam9g45", "at91sam9g45"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH,
"at91sam9g15", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH,
"at91sam9g35", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH,
"at91sam9x35", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH,
"at91sam9g25", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH,
"at91sam9x25", "at91sam9x5"),
AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH,
"at91sam9cn12", "at91sam9n12"),
AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH,
"at91sam9n12", "at91sam9n12"),
AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH,
"at91sam9cn11", "at91sam9n12"),
AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"),
AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"),
AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"),
{ /* sentinel */ },
};
static void __init at91sam9_common_init(void)
{
struct soc_device *soc;
struct device *soc_dev = NULL;
soc = at91_soc_init(at91sam9_socs);
if (soc != NULL)
soc_dev = soc_device_to_device(soc);
of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
arm_pm_idle = at91sam9_idle;
}
static void __init at91sam9_dt_device_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
arm_pm_idle = at91sam9_idle;
at91sam9_common_init();
at91sam9260_pm_init();
}
@ -40,16 +79,13 @@ static const char *at91_dt_board_compat[] __initconst = {
DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
/* Maintainer: Atmel */
.map_io = at91_map_io,
.init_machine = at91sam9_dt_device_init,
.dt_compat = at91_dt_board_compat,
MACHINE_END
static void __init at91sam9g45_dt_device_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
arm_pm_idle = at91sam9_idle;
at91sam9_common_init();
at91sam9g45_pm_init();
}
@ -60,16 +96,13 @@ static const char *at91sam9g45_board_compat[] __initconst = {
DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45")
/* Maintainer: Atmel */
.map_io = at91_map_io,
.init_machine = at91sam9g45_dt_device_init,
.dt_compat = at91sam9g45_board_compat,
MACHINE_END
static void __init at91sam9x5_dt_device_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
arm_pm_idle = at91sam9_idle;
at91sam9_common_init();
at91sam9x5_pm_init();
}
@ -81,7 +114,6 @@ static const char *at91sam9x5_board_compat[] __initconst = {
DT_MACHINE_START(at91sam9x5_dt, "Atmel AT91SAM9")
/* Maintainer: Atmel */
.map_io = at91_map_io,
.init_machine = at91sam9x5_dt_device_init,
.dt_compat = at91sam9x5_board_compat,
MACHINE_END

4
arch/arm/mach-at91/generic.h
View File

@ -25,10 +25,6 @@ extern void at91rm9200_timer_init(void);
extern void at91rm9200_idle(void);
extern void at91sam9_idle(void);
/* Matrix */
extern void at91_ioremap_matrix(u32 base_addr);
#ifdef CONFIG_PM
extern void __init at91rm9200_pm_init(void);
extern void __init at91sam9260_pm_init(void);

23
arch/arm/mach-at91/include/mach/at91_matrix.h
View File

@ -1,23 +0,0 @@
/*
* Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Under GPLv2
*/
#ifndef __MACH_AT91_MATRIX_H__
#define __MACH_AT91_MATRIX_H__
#ifndef __ASSEMBLY__
extern void __iomem *at91_matrix_base;
#define at91_matrix_read(field) \
__raw_readl(at91_matrix_base + field)
#define at91_matrix_write(field, value) \
__raw_writel(value, at91_matrix_base + field)
#else
.extern at91_matrix_base
#endif
#endif /* __MACH_AT91_MATRIX_H__ */

80
arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
View File

@ -1,80 +0,0 @@
/*
* arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
*
* Copyright (C) 2007 Atmel Corporation.
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9260 datasheet revision B.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91SAM9260_MATRIX_H
#define AT91SAM9260_MATRIX_H
#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
#define AT91_MATRIX_ULBT_FOUR (2 << 0)
#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_EBICSA 0x11C /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_CS1A_SMC (0 << 1)
#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_CS3A_SMC (0 << 3)
#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_CS4A_SMC (0 << 4)
#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_CS5A_SMC (0 << 5)
#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
#endif

64
arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
View File

@ -1,64 +0,0 @@
/*
* arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
*
* Copyright (C) 2007 Atmel Corporation.
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9261 datasheet revision D.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91SAM9261_MATRIX_H
#define AT91SAM9261_MATRIX_H
#define AT91_MATRIX_MCFG 0x00 /* Master Configuration Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_SCFG0 0x04 /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 0x08 /* Slave Configuration Register 1 */
#define AT91_MATRIX_SCFG2 0x0C /* Slave Configuration Register 2 */
#define AT91_MATRIX_SCFG3 0x10 /* Slave Configuration Register 3 */
#define AT91_MATRIX_SCFG4 0x14 /* Slave Configuration Register 4 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_TCR 0x24 /* TCM Configuration Register */
#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
#define AT91_MATRIX_ITCM_0 (0 << 0)
#define AT91_MATRIX_ITCM_16 (5 << 0)
#define AT91_MATRIX_ITCM_32 (6 << 0)
#define AT91_MATRIX_ITCM_64 (7 << 0)
#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
#define AT91_MATRIX_DTCM_0 (0 << 4)
#define AT91_MATRIX_DTCM_16 (5 << 4)
#define AT91_MATRIX_DTCM_32 (6 << 4)
#define AT91_MATRIX_DTCM_64 (7 << 4)
#define AT91_MATRIX_EBICSA 0x30 /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_CS1A_SMC (0 << 1)
#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_CS3A_SMC (0 << 3)
#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_CS4A_SMC (0 << 4)
#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_CS5A_SMC (0 << 5)
#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_USBPUCR 0x34 /* USB Pad Pull-Up Control Register */
#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */
#endif

129
arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
View File

@ -1,129 +0,0 @@
/*
* arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
*
* Copyright (C) 2006 Atmel Corporation.
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9263 datasheet revision B (Preliminary).
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91SAM9263_MATRIX_H
#define AT91SAM9263_MATRIX_H
#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */
#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */
#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
#define AT91_MATRIX_ULBT_FOUR (2 << 0)
#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */
#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */
#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */
#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */
#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */
#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */
#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */
#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */
#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */
#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */
#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */
#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */
#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_RCB2 (1 << 2)
#define AT91_MATRIX_RCB3 (1 << 3)
#define AT91_MATRIX_RCB4 (1 << 4)
#define AT91_MATRIX_RCB5 (1 << 5)
#define AT91_MATRIX_RCB6 (1 << 6)
#define AT91_MATRIX_RCB7 (1 << 7)
#define AT91_MATRIX_RCB8 (1 << 8)
#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */
#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
#define AT91_MATRIX_ITCM_0 (0 << 0)
#define AT91_MATRIX_ITCM_16 (5 << 0)
#define AT91_MATRIX_ITCM_32 (6 << 0)
#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
#define AT91_MATRIX_DTCM_0 (0 << 4)
#define AT91_MATRIX_DTCM_16 (5 << 4)
#define AT91_MATRIX_DTCM_32 (6 << 4)
#define AT91_MATRIX_EBI0CSA 0x120 /* EBI0 Chip Select Assignment Register */
#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3)
#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4)
#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4)
#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5)
#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16)
#define AT91_MATRIX_EBI1CSA 0x124 /* EBI1 Chip Select Assignment Register */
#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3)
#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16)
#endif

153
arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
View File

@ -1,153 +0,0 @@
/*
* Matrix-centric header file for the AT91SAM9G45 family
*
* Copyright (C) 2008-2009 Atmel Corporation.
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9G45 preliminary datasheet.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91SAM9G45_MATRIX_H
#define AT91SAM9G45_MATRIX_H
#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */
#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */
#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */
#define AT91_MATRIX_MCFG9 0x24 /* Master Configuration Register 9 */
#define AT91_MATRIX_MCFG10 0x28 /* Master Configuration Register 10 */
#define AT91_MATRIX_MCFG11 0x2C /* Master Configuration Register 11 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
#define AT91_MATRIX_ULBT_FOUR (2 << 0)
#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0)
#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0)
#define AT91_MATRIX_ULBT_128 (7 << 0)
#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */
#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */
#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */
#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */
#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */
#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */
#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */
#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */
#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */
#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */
#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */
#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */
#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */
#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_RCB2 (1 << 2)
#define AT91_MATRIX_RCB3 (1 << 3)
#define AT91_MATRIX_RCB4 (1 << 4)
#define AT91_MATRIX_RCB5 (1 << 5)
#define AT91_MATRIX_RCB6 (1 << 6)
#define AT91_MATRIX_RCB7 (1 << 7)
#define AT91_MATRIX_RCB8 (1 << 8)
#define AT91_MATRIX_RCB9 (1 << 9)
#define AT91_MATRIX_RCB10 (1 << 10)
#define AT91_MATRIX_RCB11 (1 << 11)
#define AT91_MATRIX_TCMR 0x110 /* TCM Configuration Register */
#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
#define AT91_MATRIX_ITCM_0 (0 << 0)
#define AT91_MATRIX_ITCM_32 (6 << 0)
#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
#define AT91_MATRIX_DTCM_0 (0 << 4)
#define AT91_MATRIX_DTCM_32 (6 << 4)
#define AT91_MATRIX_DTCM_64 (7 << 4)
#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */
#define AT91_MATRIX_TCM_NO_WS (0x0 << 11)
#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11)
#define AT91_MATRIX_VIDEO 0x118 /* Video Mode Configuration Register */
#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */
#define AT91C_VDEC_SEL_OFF (0 << 0)
#define AT91C_VDEC_SEL_ON (1 << 0)
#define AT91_MATRIX_EBICSA 0x128 /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4)
#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5)
#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
#define AT91_MATRIX_WPMR 0x1E4 /* Write Protect Mode Register */
#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
#define AT91_MATRIX_WPSR 0x1E8 /* Write Protect Status Register */
#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
#define AT91_MATRIX_WPSR_WPV (1 << 0)
#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
#endif

53
arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
View File

@ -1,53 +0,0 @@
/*
* Matrix-centric header file for the AT91SAM9N12
*
* Copyright (C) 2012 Atmel Corporation.
*
* Only EBI related registers.
* Write Protect register definitions may be useful.
*
* Licensed under GPLv2 or later.
*/
#ifndef _AT91SAM9N12_MATRIX_H_
#define _AT91SAM9N12_MATRIX_H_
#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x118) /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3)
#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */
#define AT91_MATRIX_NFD0_ON_D0 (0 << 24)
#define AT91_MATRIX_NFD0_ON_D16 (1 << 24)
#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */
#define AT91_MATRIX_MP_OFF (0 << 25)
#define AT91_MATRIX_MP_ON (1 << 25)
#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
#define AT91_MATRIX_WPSR_WPV (1 << 0)
#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
#endif

96
arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
View File

@ -1,96 +0,0 @@
/*
* arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
*
* Copyright (C) 2007 Atmel Corporation
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9RL datasheet revision A. (Preliminary)
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#ifndef AT91SAM9RL_MATRIX_H
#define AT91SAM9RL_MATRIX_H
#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
#define AT91_MATRIX_ULBT_FOUR (2 << 0)
#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_RCB2 (1 << 2)
#define AT91_MATRIX_RCB3 (1 << 3)
#define AT91_MATRIX_RCB4 (1 << 4)
#define AT91_MATRIX_RCB5 (1 << 5)
#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */
#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
#define AT91_MATRIX_ITCM_0 (0 << 0)
#define AT91_MATRIX_ITCM_16 (5 << 0)
#define AT91_MATRIX_ITCM_32 (6 << 0)
#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
#define AT91_MATRIX_DTCM_0 (0 << 4)
#define AT91_MATRIX_DTCM_16 (5 << 4)
#define AT91_MATRIX_DTCM_32 (6 << 4)
#define AT91_MATRIX_EBICSA 0x120 /* EBI0 Chip Select Assignment Register */
#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_CS1A_SMC (0 << 1)
#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_CS3A_SMC (0 << 3)
#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_CS4A_SMC (0 << 4)
#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_CS5A_SMC (0 << 5)
#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
#endif

53
arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
View File

@ -1,53 +0,0 @@
/*
* Matrix-centric header file for the AT91SAM9x5 family
*
* Copyright (C) 2009-2012 Atmel Corporation.
*
* Only EBI related registers.
* Write Protect register definitions may be useful.
*
* Licensed under GPLv2 or later.
*/
#ifndef AT91SAM9X5_MATRIX_H
#define AT91SAM9X5_MATRIX_H
#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3)
#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */
#define AT91_MATRIX_NFD0_ON_D0 (0 << 24)
#define AT91_MATRIX_NFD0_ON_D16 (1 << 24)
#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */
#define AT91_MATRIX_MP_OFF (0 << 25)
#define AT91_MATRIX_MP_ON (1 << 25)
#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
#define AT91_MATRIX_WPSR_WPV (1 << 0)
#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
#endif

27
arch/arm/mach-at91/include/mach/io.h
View File

@ -1,27 +0,0 @@
/*
* arch/arm/mach-at91/include/mach/io.h
*
* Copyright (C) 2003 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
#define IO_SPACE_LIMIT 0xFFFFFFFF
#define __io(a) __typesafe_io(a)
#endif

143
arch/arm/mach-at91/pm.c
View File

@ -29,6 +29,8 @@
#include <linux/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/fncpy.h>
#include <asm/cacheflush.h>
#include <mach/cpu.h>
#include <mach/hardware.h>
@ -41,7 +43,6 @@ static struct {
int memctrl;
} at91_pm_data;
static void (*at91_pm_standby)(void);
void __iomem *at91_ramc_base[2];
static int at91_pm_valid_state(suspend_state_t state)
@ -119,76 +120,67 @@ int at91_suspend_entering_slow_clock(void)
}
EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0,
static void (*at91_suspend_sram_fn)(void __iomem *pmc, void __iomem *ramc0,
void __iomem *ramc1, int memctrl);
#ifdef CONFIG_AT91_SLOW_CLOCK
extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
extern void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *ramc0,
void __iomem *ramc1, int memctrl);
extern u32 at91_slow_clock_sz;
#endif
extern u32 at91_pm_suspend_in_sram_sz;
static void at91_pm_suspend(suspend_state_t state)
{
unsigned int pm_data = at91_pm_data.memctrl;
pm_data |= (state == PM_SUSPEND_MEM) ?
AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0;
flush_cache_all();
outer_disable();
at91_suspend_sram_fn(at91_pmc_base, at91_ramc_base[0],
at91_ramc_base[1], pm_data);
outer_resume();
}
static int at91_pm_enter(suspend_state_t state)
{
at91_pinctrl_gpio_suspend();
switch (state) {
/*
* Suspend-to-RAM is like STANDBY plus slow clock mode, so
* drivers must suspend more deeply, the master clock switches
* to the clk32k and turns off the main oscillator
*/
case PM_SUSPEND_MEM:
/*
* Suspend-to-RAM is like STANDBY plus slow clock mode, so
* drivers must suspend more deeply: only the master clock
* controller may be using the main oscillator.
* Ensure that clocks are in a valid state.
*/
case PM_SUSPEND_MEM:
/*
* Ensure that clocks are in a valid state.
*/
if (!at91_pm_verify_clocks())
goto error;
/*
* Enter slow clock mode by switching over to clk32k and
* turning off the main oscillator; reverse on wakeup.
*/
if (slow_clock) {
#ifdef CONFIG_AT91_SLOW_CLOCK
/* copy slow_clock handler to SRAM, and call it */
memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
#endif
slow_clock(at91_pmc_base, at91_ramc_base[0],
at91_ramc_base[1],
at91_pm_data.memctrl);
break;
} else {
pr_info("AT91: PM - no slow clock mode enabled ...\n");
/* FALLTHROUGH leaving master clock alone */
}
/*
* STANDBY mode has *all* drivers suspended; ignores irqs not
* marked as 'wakeup' event sources; and reduces DRAM power.
* But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and
* nothing fancy done with main or cpu clocks.
*/
case PM_SUSPEND_STANDBY:
/*
* NOTE: the Wait-for-Interrupt instruction needs to be
* in icache so no SDRAM accesses are needed until the
* wakeup IRQ occurs and self-refresh is terminated.
* For ARM 926 based chips, this requirement is weaker
* as at91sam9 can access a RAM in self-refresh mode.
*/
if (at91_pm_standby)
at91_pm_standby();
break;
case PM_SUSPEND_ON:
cpu_do_idle();
break;
default:
pr_debug("AT91: PM - bogus suspend state %d\n", state);
if (!at91_pm_verify_clocks())
goto error;
at91_pm_suspend(state);
break;
/*
* STANDBY mode has *all* drivers suspended; ignores irqs not
* marked as 'wakeup' event sources; and reduces DRAM power.
* But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and
* nothing fancy done with main or cpu clocks.
*/
case PM_SUSPEND_STANDBY:
at91_pm_suspend(state);
break;
case PM_SUSPEND_ON:
cpu_do_idle();
break;
default:
pr_debug("AT91: PM - bogus suspend state %d\n", state);
goto error;
}
error:
@ -218,12 +210,10 @@ static struct platform_device at91_cpuidle_device = {
.name = "cpuidle-at91",
};
void at91_pm_set_standby(void (*at91_standby)(void))
static void at91_pm_set_standby(void (*at91_standby)(void))
{
if (at91_standby) {
if (at91_standby)
at91_cpuidle_device.dev.platform_data = at91_standby;
at91_pm_standby = at91_standby;
}
}
static const struct of_device_id ramc_ids[] __initconst = {
@ -263,7 +253,6 @@ static __init void at91_dt_ramc(void)
at91_pm_set_standby(standby);
}
#ifdef CONFIG_AT91_SLOW_CLOCK
static void __init at91_pm_sram_init(void)
{
struct gen_pool *sram_pool;
@ -291,30 +280,36 @@ static void __init at91_pm_sram_init(void)
return;
}
sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz);
sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
if (!sram_base) {
pr_warn("%s: unable to alloc ocram!\n", __func__);
pr_warn("%s: unable to alloc sram!\n", __func__);
return;
}
sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
}
#endif
at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase,
at91_pm_suspend_in_sram_sz, false);
if (!at91_suspend_sram_fn) {
pr_warn("SRAM: Could not map\n");
return;
}
/* Copy the pm suspend handler to SRAM */
at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
}
static void __init at91_pm_init(void)
{
#ifdef CONFIG_AT91_SLOW_CLOCK
at91_pm_sram_init();
#endif
pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
if (at91_cpuidle_device.dev.platform_data)
platform_device_register(&at91_cpuidle_device);
suspend_set_ops(&at91_pm_ops);
if (at91_suspend_sram_fn)
suspend_set_ops(&at91_pm_ops);
else
pr_info("AT91: PM not supported, due to no SRAM allocated\n");
}
void __init at91rm9200_pm_init(void)

14
arch/arm/mach-at91/pm.h
View File

@ -15,11 +15,13 @@
#include <mach/at91_ramc.h>
#ifdef CONFIG_PM
extern void at91_pm_set_standby(void (*at91_standby)(void));
#else
static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
#endif
#define AT91_PM_MEMTYPE_MASK 0x0f
#define AT91_PM_MODE_OFFSET 4
#define AT91_PM_MODE_MASK 0x01
#define AT91_PM_MODE(x) (((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET)
#define AT91_PM_SLOW_CLOCK 0x01
/*
* The AT91RM9200 goes into self-refresh mode with this command, and will
@ -31,6 +33,7 @@ static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
* still in self-refresh is "not recommended", but seems to work.
*/
#ifndef __ASSEMBLY__
static inline void at91rm9200_standby(void)
{
u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
@ -112,3 +115,4 @@ static inline void at91sam9_sdram_standby(void)
}
#endif
#endif

335
arch/arm/mach-at91/pm_slowclock.S
View File

@ -1,335 +0,0 @@
/*
* arch/arm/mach-at91/pm_slow_clock.S
*
* Copyright (C) 2006 Savin Zlobec
*
* AT91SAM9 support:
* Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/linkage.h>
#include <linux/clk/at91_pmc.h>
#include <mach/hardware.h>
#include <mach/at91_ramc.h>
/*
* When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
* clock during suspend by adjusting its prescalar and divisor.
* NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
* are errata regarding adjusting the prescalar and divisor.
*/
#undef SLOWDOWN_MASTER_CLOCK
pmc .req r0
sdramc .req r1
ramc1 .req r2
memctrl .req r3
tmp1 .req r4
tmp2 .req r5
/*
* Wait until master clock is ready (after switching master clock source)
*/
.macro wait_mckrdy
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MCKRDY
beq 1b
.endm
/*
* Wait until master oscillator has stabilized.
*/
.macro wait_moscrdy
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MOSCS
beq 1b
.endm
/*
* Wait until PLLA has locked.
*/
.macro wait_pllalock
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKA
beq 1b
.endm
/*
* Wait until PLLB has locked.
*/
.macro wait_pllblock
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKB
beq 1b
.endm
.text
.arm
/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
* void __iomem *ramc1, int memctrl)
*/
ENTRY(at91_slow_clock)
/* Save registers on stack */
stmfd sp!, {r4 - r12, lr}
/*
* Register usage:
* R0 = Base address of AT91_PMC
* R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
* R2 = Base address of second RAM Controller or 0 if not present
* R3 = Memory controller
* R4 = temporary register
* R5 = temporary register
*/
/* Drain write buffer */
mov tmp1, #0
mcr p15, 0, tmp1, c7, c10, 4
cmp memctrl, #AT91_MEMCTRL_MC
bne ddr_sr_enable
/*
* at91rm9200 Memory controller
*/
/* Put SDRAM in self-refresh mode */
mov tmp1, #1
str tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR]
b sdr_sr_done
/*
* DDRSDR Memory controller
*/
ddr_sr_enable:
cmp memctrl, #AT91_MEMCTRL_DDRSDR
bne sdr_sr_enable
/* LPDDR1 --> force DDR2 mode during self-refresh */
ldr tmp1, [sdramc, #AT91_DDRSDRC_MDR]
str tmp1, .saved_sam9_mdr
bic tmp1, tmp1, #~AT91_DDRSDRC_MD
cmp tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR
ldreq tmp1, [sdramc, #AT91_DDRSDRC_MDR]
biceq tmp1, tmp1, #AT91_DDRSDRC_MD
orreq tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2
streq tmp1, [sdramc, #AT91_DDRSDRC_MDR]
/* prepare for DDRAM self-refresh mode */
ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR]
str tmp1, .saved_sam9_lpr
bic tmp1, #AT91_DDRSDRC_LPCB
orr tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH
/* figure out if we use the second ram controller */
cmp ramc1, #0
beq ddr_no_2nd_ctrl
ldr tmp2, [ramc1, #AT91_DDRSDRC_MDR]
str tmp2, .saved_sam9_mdr1
bic tmp2, tmp2, #~AT91_DDRSDRC_MD
cmp tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR
ldreq tmp2, [ramc1, #AT91_DDRSDRC_MDR]
biceq tmp2, tmp2, #AT91_DDRSDRC_MD
orreq tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2
streq tmp2, [ramc1, #AT91_DDRSDRC_MDR]
ldr tmp2, [ramc1, #AT91_DDRSDRC_LPR]
str tmp2, .saved_sam9_lpr1
bic tmp2, #AT91_DDRSDRC_LPCB
orr tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
/* Enable DDRAM self-refresh mode */
str tmp2, [ramc1, #AT91_DDRSDRC_LPR]
ddr_no_2nd_ctrl:
str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
b sdr_sr_done
/*
* SDRAMC Memory controller
*/
sdr_sr_enable:
/* Enable SDRAM self-refresh mode */
ldr tmp1, [sdramc, #AT91_SDRAMC_LPR]
str tmp1, .saved_sam9_lpr
bic tmp1, #AT91_SDRAMC_LPCB
orr tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH
str tmp1, [sdramc, #AT91_SDRAMC_LPR]
sdr_sr_done:
/* Save Master clock setting */
ldr tmp1, [pmc, #AT91_PMC_MCKR]
str tmp1, .saved_mckr
/*
* Set the Master clock source to slow clock
*/
bic tmp1, tmp1, #AT91_PMC_CSS
str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
#ifdef SLOWDOWN_MASTER_CLOCK
/*
* Set the Master Clock PRES and MDIV fields.
*
* See AT91RM9200 errata #27 and #28 for details.
*/
mov tmp1, #0
str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
#endif
/* Save PLLA setting and disable it */
ldr tmp1, [pmc, #AT91_CKGR_PLLAR]
str tmp1, .saved_pllar
mov tmp1, #AT91_PMC_PLLCOUNT
orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
str tmp1, [pmc, #AT91_CKGR_PLLAR]
/* Save PLLB setting and disable it */
ldr tmp1, [pmc, #AT91_CKGR_PLLBR]
str tmp1, .saved_pllbr
mov tmp1, #AT91_PMC_PLLCOUNT
str tmp1, [pmc, #AT91_CKGR_PLLBR]
/* Turn off the main oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
bic tmp1, tmp1, #AT91_PMC_MOSCEN
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
/* Wait for interrupt */
mcr p15, 0, tmp1, c7, c0, 4
/* Turn on the main oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
orr tmp1, tmp1, #AT91_PMC_MOSCEN
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
wait_moscrdy
/* Restore PLLB setting */
ldr tmp1, .saved_pllbr
str tmp1, [pmc, #AT91_CKGR_PLLBR]
tst tmp1, #(AT91_PMC_MUL & 0xff0000)
bne 1f
tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
beq 2f
1:
wait_pllblock
2:
/* Restore PLLA setting */
ldr tmp1, .saved_pllar
str tmp1, [pmc, #AT91_CKGR_PLLAR]
tst tmp1, #(AT91_PMC_MUL & 0xff0000)
bne 3f
tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
beq 4f
3:
wait_pllalock
4:
#ifdef SLOWDOWN_MASTER_CLOCK
/*
* First set PRES if it was not 0,
* than set CSS and MDIV fields.
*
* See AT91RM9200 errata #27 and #28 for details.
*/
ldr tmp1, .saved_mckr
tst tmp1, #AT91_PMC_PRES
beq 2f
and tmp1, tmp1, #AT91_PMC_PRES
str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
#endif
/*
* Restore master clock setting
*/
2: ldr tmp1, .saved_mckr
str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
/*
* at91rm9200 Memory controller
* Do nothing - self-refresh is automatically disabled.
*/
cmp memctrl, #AT91_MEMCTRL_MC
beq ram_restored
/*
* DDRSDR Memory controller
*/
cmp memctrl, #AT91_MEMCTRL_DDRSDR
bne sdr_en_restore
/* Restore MDR in case of LPDDR1 */
ldr tmp1, .saved_sam9_mdr
str tmp1, [sdramc, #AT91_DDRSDRC_MDR]
/* Restore LPR on AT91 with DDRAM */
ldr tmp1, .saved_sam9_lpr
str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
/* if we use the second ram controller */
cmp ramc1, #0
ldrne tmp2, .saved_sam9_mdr1
strne tmp2, [ramc1, #AT91_DDRSDRC_MDR]
ldrne tmp2, .saved_sam9_lpr1
strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
b ram_restored
/*
* SDRAMC Memory controller
*/
sdr_en_restore:
/* Restore LPR on AT91 with SDRAM */
ldr tmp1, .saved_sam9_lpr
str tmp1, [sdramc, #AT91_SDRAMC_LPR]
ram_restored:
/* Restore registers, and return */
ldmfd sp!, {r4 - r12, pc}
.saved_mckr:
.word 0
.saved_pllar:
.word 0
.saved_pllbr:
.word 0
.saved_sam9_lpr:
.word 0
.saved_sam9_lpr1:
.word 0
.saved_sam9_mdr:
.word 0
.saved_sam9_mdr1:
.word 0
ENTRY(at91_slow_clock_sz)
.word .-at91_slow_clock

338
arch/arm/mach-at91/pm_suspend.S Normal file
View File

@ -0,0 +1,338 @@
/*
* arch/arm/mach-at91/pm_slow_clock.S
*
* Copyright (C) 2006 Savin Zlobec
*
* AT91SAM9 support:
* Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/linkage.h>
#include <linux/clk/at91_pmc.h>
#include <mach/hardware.h>
#include <mach/at91_ramc.h>
#include "pm.h"
#define SRAMC_SELF_FRESH_ACTIVE 0x01
#define SRAMC_SELF_FRESH_EXIT 0x00
pmc .req r0
tmp1 .req r4
tmp2 .req r5
/*
* Wait until master clock is ready (after switching master clock source)
*/
.macro wait_mckrdy
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MCKRDY
beq 1b
.endm
/*
* Wait until master oscillator has stabilized.
*/
.macro wait_moscrdy
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MOSCS
beq 1b
.endm
/*
* Wait until PLLA has locked.
*/
.macro wait_pllalock
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKA
beq 1b
.endm
/*
* Put the processor to enter the idle state
*/
.macro at91_cpu_idle
#if defined(CONFIG_CPU_V7)
mov tmp1, #AT91_PMC_PCK
str tmp1, [pmc, #AT91_PMC_SCDR]
dsb
wfi @ Wait For Interrupt
#else
mcr p15, 0, tmp1, c7, c0, 4
#endif
.endm
.text
.arm
/*
* void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc,
* void __iomem *ramc1, int memctrl)
* @input param:
* @r0: base address of AT91_PMC
* @r1: base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS)
* @r2: base address of second SDRAM Controller or 0 if not present
* @r3: pm information
*/
ENTRY(at91_pm_suspend_in_sram)
/* Save registers on stack */
stmfd sp!, {r4 - r12, lr}
/* Drain write buffer */
mov tmp1, #0
mcr p15, 0, tmp1, c7, c10, 4
str r0, .pmc_base
str r1, .sramc_base
str r2, .sramc1_base
and r0, r3, #AT91_PM_MEMTYPE_MASK
str r0, .memtype
lsr r0, r3, #AT91_PM_MODE_OFFSET
and r0, r0, #AT91_PM_MODE_MASK
str r0, .pm_mode
/* Active the self-refresh mode */
mov r0, #SRAMC_SELF_FRESH_ACTIVE
bl at91_sramc_self_refresh
ldr r0, .pm_mode
tst r0, #AT91_PM_SLOW_CLOCK
beq skip_disable_main_clock
ldr pmc, .pmc_base
/* Save Master clock setting */
ldr tmp1, [pmc, #AT91_PMC_MCKR]
str tmp1, .saved_mckr
/*
* Set the Master clock source to slow clock
*/
bic tmp1, tmp1, #AT91_PMC_CSS
str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
/* Save PLLA setting and disable it */
ldr tmp1, [pmc, #AT91_CKGR_PLLAR]
str tmp1, .saved_pllar
mov tmp1, #AT91_PMC_PLLCOUNT
orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
str tmp1, [pmc, #AT91_CKGR_PLLAR]
/* Turn off the main oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
bic tmp1, tmp1, #AT91_PMC_MOSCEN
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
skip_disable_main_clock:
ldr pmc, .pmc_base
/* Wait for interrupt */
at91_cpu_idle
ldr r0, .pm_mode
tst r0, #AT91_PM_SLOW_CLOCK
beq skip_enable_main_clock
ldr pmc, .pmc_base
/* Turn on the main oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
orr tmp1, tmp1, #AT91_PMC_MOSCEN
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
wait_moscrdy
/* Restore PLLA setting */
ldr tmp1, .saved_pllar
str tmp1, [pmc, #AT91_CKGR_PLLAR]
tst tmp1, #(AT91_PMC_MUL & 0xff0000)
bne 3f
tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
beq 4f
3:
wait_pllalock
4:
/*
* Restore master clock setting
*/
ldr tmp1, .saved_mckr
str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
skip_enable_main_clock:
/* Exit the self-refresh mode */
mov r0, #SRAMC_SELF_FRESH_EXIT
bl at91_sramc_self_refresh
/* Restore registers, and return */
ldmfd sp!, {r4 - r12, pc}
ENDPROC(at91_pm_suspend_in_sram)
/*
* void at91_sramc_self_refresh(unsigned int is_active)
*
* @input param:
* @r0: 1 - active self-refresh mode
* 0 - exit self-refresh mode
* register usage:
* @r1: memory type
* @r2: base address of the sram controller
*/
ENTRY(at91_sramc_self_refresh)
ldr r1, .memtype
ldr r2, .sramc_base
cmp r1, #AT91_MEMCTRL_MC
bne ddrc_sf
/*
* at91rm9200 Memory controller
*/
/*
* For exiting the self-refresh mode, do nothing,
* automatically exit the self-refresh mode.
*/
tst r0, #SRAMC_SELF_FRESH_ACTIVE
beq exit_sramc_sf
/* Active SDRAM self-refresh mode */
mov r3, #1
str r3, [r2, #AT91RM9200_SDRAMC_SRR]
b exit_sramc_sf
ddrc_sf:
cmp r1, #AT91_MEMCTRL_DDRSDR
bne sdramc_sf
/*
* DDR Memory controller
*/
tst r0, #SRAMC_SELF_FRESH_ACTIVE
beq ddrc_exit_sf
/* LPDDR1 --> force DDR2 mode during self-refresh */
ldr r3, [r2, #AT91_DDRSDRC_MDR]
str r3, .saved_sam9_mdr
bic r3, r3, #~AT91_DDRSDRC_MD
cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
ldreq r3, [r2, #AT91_DDRSDRC_MDR]
biceq r3, r3, #AT91_DDRSDRC_MD
orreq r3, r3, #AT91_DDRSDRC_MD_DDR2
streq r3, [r2, #AT91_DDRSDRC_MDR]
/* Active DDRC self-refresh mode */
ldr r3, [r2, #AT91_DDRSDRC_LPR]
str r3, .saved_sam9_lpr
bic r3, r3, #AT91_DDRSDRC_LPCB
orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
str r3, [r2, #AT91_DDRSDRC_LPR]
/* If using the 2nd ddr controller */
ldr r2, .sramc1_base
cmp r2, #0
beq no_2nd_ddrc
ldr r3, [r2, #AT91_DDRSDRC_MDR]
str r3, .saved_sam9_mdr1
bic r3, r3, #~AT91_DDRSDRC_MD
cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
ldreq r3, [r2, #AT91_DDRSDRC_MDR]
biceq r3, r3, #AT91_DDRSDRC_MD
orreq r3, r3, #AT91_DDRSDRC_MD_DDR2
streq r3, [r2, #AT91_DDRSDRC_MDR]
/* Active DDRC self-refresh mode */
ldr r3, [r2, #AT91_DDRSDRC_LPR]
str r3, .saved_sam9_lpr1
bic r3, r3, #AT91_DDRSDRC_LPCB
orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
str r3, [r2, #AT91_DDRSDRC_LPR]
no_2nd_ddrc:
b exit_sramc_sf
ddrc_exit_sf:
/* Restore MDR in case of LPDDR1 */
ldr r3, .saved_sam9_mdr
str r3, [r2, #AT91_DDRSDRC_MDR]
/* Restore LPR on AT91 with DDRAM */
ldr r3, .saved_sam9_lpr
str r3, [r2, #AT91_DDRSDRC_LPR]
/* If using the 2nd ddr controller */
ldr r2, .sramc1_base
cmp r2, #0
ldrne r3, .saved_sam9_mdr1
strne r3, [r2, #AT91_DDRSDRC_MDR]
ldrne r3, .saved_sam9_lpr1
strne r3, [r2, #AT91_DDRSDRC_LPR]
b exit_sramc_sf
/*
* SDRAMC Memory controller
*/
sdramc_sf:
tst r0, #SRAMC_SELF_FRESH_ACTIVE
beq sdramc_exit_sf
/* Active SDRAMC self-refresh mode */
ldr r3, [r2, #AT91_SDRAMC_LPR]
str r3, .saved_sam9_lpr
bic r3, r3, #AT91_SDRAMC_LPCB
orr r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
str r3, [r2, #AT91_SDRAMC_LPR]
sdramc_exit_sf:
ldr r3, .saved_sam9_lpr
str r3, [r2, #AT91_SDRAMC_LPR]
exit_sramc_sf:
mov pc, lr
ENDPROC(at91_sramc_self_refresh)
.pmc_base:
.word 0
.sramc_base:
.word 0
.sramc1_base:
.word 0
.memtype:
.word 0
.pm_mode:
.word 0
.saved_mckr:
.word 0
.saved_pllar:
.word 0
.saved_sam9_lpr:
.word 0
.saved_sam9_lpr1:
.word 0
.saved_sam9_mdr:
.word 0
.saved_sam9_mdr1:
.word 0
ENTRY(at91_pm_suspend_in_sram_sz)
.word .-at91_pm_suspend_in_sram

99
arch/arm/mach-at91/sama5.c
View File

@ -7,48 +7,50 @@
* Licensed under GPLv2 or later.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/micrel_phy.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/clk-provider.h>
#include <linux/phy.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include "generic.h"
#include "soc.h"
static int ksz8081_phy_fixup(struct phy_device *phy)
{
int value;
value = phy_read(phy, 0x16);
value &= ~0x20;
phy_write(phy, 0x16, value);
return 0;
}
static const struct at91_soc sama5_socs[] = {
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
"sama5d31", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,
"sama5d33", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH,
"sama5d34", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH,
"sama5d35", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH,
"sama5d36", "sama5d3"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH,
"sama5d41", "sama5d4"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH,
"sama5d42", "sama5d4"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH,
"sama5d43", "sama5d4"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH,
"sama5d44", "sama5d4"),
{ /* sentinel */ },
};
static void __init sama5_dt_device_init(void)
{
if (of_machine_is_compatible("atmel,sama5d4ek") &&
IS_ENABLED(CONFIG_PHYLIB)) {
phy_register_fixup_for_id("fc028000.etherne:00",
ksz8081_phy_fixup);
}
struct soc_device *soc;
struct device *soc_dev = NULL;
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
soc = at91_soc_init(sama5_socs);
if (soc != NULL)
soc_dev = soc_device_to_device(soc);
of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
at91sam9x5_pm_init();
}
@ -59,44 +61,10 @@ static const char *sama5_dt_board_compat[] __initconst = {
DT_MACHINE_START(sama5_dt, "Atmel SAMA5")
/* Maintainer: Atmel */
.map_io = at91_map_io,
.init_machine = sama5_dt_device_init,
.dt_compat = sama5_dt_board_compat,
MACHINE_END
static struct map_desc at91_io_desc[] __initdata = {
{
.virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC),
.pfn = __phys_to_pfn(SAMA5D4_BASE_MPDDRC),
.length = SZ_512,
.type = MT_DEVICE,
},
{
.virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC),
.pfn = __phys_to_pfn(SAMA5D4_BASE_PMC),
.length = SZ_512,
.type = MT_DEVICE,
},
{ /* On sama5d4, we use USART3 as serial console */
.virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3),
.pfn = __phys_to_pfn(SAMA5D4_BASE_USART3),
.length = SZ_256,
.type = MT_DEVICE,
},
{ /* A bunch of peripheral with fine grained IO space */
.virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2),
.pfn = __phys_to_pfn(SAMA5D4_BASE_SYS2),
.length = SZ_2K,
.type = MT_DEVICE,
},
};
static void __init sama5_alt_map_io(void)
{
at91_alt_map_io();
iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc));
}
static const char *sama5_alt_dt_board_compat[] __initconst = {
"atmel,sama5d4",
NULL
@ -104,7 +72,6 @@ static const char *sama5_alt_dt_board_compat[] __initconst = {
DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5")
/* Maintainer: Atmel */
.map_io = sama5_alt_map_io,
.init_machine = sama5_dt_device_init,
.dt_compat = sama5_alt_dt_board_compat,
.l2c_aux_mask = ~0UL,

330
arch/arm/mach-at91/setup.c
View File

@ -1,330 +0,0 @@
/*
* Copyright (C) 2007 Atmel Corporation.
* Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Under GPLv2
*/
#define pr_fmt(fmt) "AT91: " fmt
#include <linux/module.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/pm.h>
#include <linux/of_address.h>
#include <linux/pinctrl/machine.h>
#include <linux/clk/at91_pmc.h>
#include <asm/system_misc.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include "generic.h"
#include "pm.h"
struct at91_socinfo at91_soc_initdata;
EXPORT_SYMBOL(at91_soc_initdata);
static struct map_desc at91_io_desc __initdata __maybe_unused = {
.virtual = (unsigned long)AT91_VA_BASE_SYS,
.pfn = __phys_to_pfn(AT91_BASE_SYS),
.length = SZ_16K,
.type = MT_DEVICE,
};
static struct map_desc at91_alt_io_desc __initdata __maybe_unused = {
.virtual = (unsigned long)AT91_ALT_VA_BASE_SYS,
.pfn = __phys_to_pfn(AT91_ALT_BASE_SYS),
.length = 24 * SZ_1K,
.type = MT_DEVICE,
};
static void __init soc_detect(u32 dbgu_base)
{
u32 cidr, socid;
cidr = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
socid = cidr & ~AT91_CIDR_VERSION;
switch (socid) {
case ARCH_ID_AT91RM9200:
at91_soc_initdata.type = AT91_SOC_RM9200;
if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN)
at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
break;
case ARCH_ID_AT91SAM9260:
at91_soc_initdata.type = AT91_SOC_SAM9260;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
break;
case ARCH_ID_AT91SAM9261:
at91_soc_initdata.type = AT91_SOC_SAM9261;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
break;
case ARCH_ID_AT91SAM9263:
at91_soc_initdata.type = AT91_SOC_SAM9263;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
break;
case ARCH_ID_AT91SAM9G20:
at91_soc_initdata.type = AT91_SOC_SAM9G20;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
break;
case ARCH_ID_AT91SAM9G45:
at91_soc_initdata.type = AT91_SOC_SAM9G45;
if (cidr == ARCH_ID_AT91SAM9G45ES)
at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES;
break;
case ARCH_ID_AT91SAM9RL64:
at91_soc_initdata.type = AT91_SOC_SAM9RL;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
break;
case ARCH_ID_AT91SAM9X5:
at91_soc_initdata.type = AT91_SOC_SAM9X5;
break;
case ARCH_ID_AT91SAM9N12:
at91_soc_initdata.type = AT91_SOC_SAM9N12;
break;
case ARCH_ID_SAMA5:
at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) {
at91_soc_initdata.type = AT91_SOC_SAMA5D3;
}
break;
}
/* at91sam9g10 */
if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
at91_soc_initdata.type = AT91_SOC_SAM9G10;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
}
/* at91sam9xe */
else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
at91_soc_initdata.type = AT91_SOC_SAM9260;
at91_soc_initdata.subtype = AT91_SOC_SAM9XE;
}
if (!at91_soc_is_detected())
return;
at91_soc_initdata.cidr = cidr;
/* sub version of soc */
if (!at91_soc_initdata.exid)
at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
if (at91_soc_initdata.type == AT91_SOC_SAM9G45) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_AT91SAM9M10:
at91_soc_initdata.subtype = AT91_SOC_SAM9M10;
break;
case ARCH_EXID_AT91SAM9G46:
at91_soc_initdata.subtype = AT91_SOC_SAM9G46;
break;
case ARCH_EXID_AT91SAM9M11:
at91_soc_initdata.subtype = AT91_SOC_SAM9M11;
break;
}
}
if (at91_soc_initdata.type == AT91_SOC_SAM9X5) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_AT91SAM9G15:
at91_soc_initdata.subtype = AT91_SOC_SAM9G15;
break;
case ARCH_EXID_AT91SAM9G35:
at91_soc_initdata.subtype = AT91_SOC_SAM9G35;
break;
case ARCH_EXID_AT91SAM9X35:
at91_soc_initdata.subtype = AT91_SOC_SAM9X35;
break;
case ARCH_EXID_AT91SAM9G25:
at91_soc_initdata.subtype = AT91_SOC_SAM9G25;
break;
case ARCH_EXID_AT91SAM9X25:
at91_soc_initdata.subtype = AT91_SOC_SAM9X25;
break;
}
}
if (at91_soc_initdata.type == AT91_SOC_SAMA5D3) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_SAMA5D31:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D31;
break;
case ARCH_EXID_SAMA5D33:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D33;
break;
case ARCH_EXID_SAMA5D34:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D34;
break;
case ARCH_EXID_SAMA5D35:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D35;
break;
case ARCH_EXID_SAMA5D36:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D36;
break;
}
}
}
static void __init alt_soc_detect(u32 dbgu_base)
{
u32 cidr, socid;
/* SoC ID */
cidr = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
socid = cidr & ~AT91_CIDR_VERSION;
switch (socid) {
case ARCH_ID_SAMA5:
at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) {
at91_soc_initdata.type = AT91_SOC_SAMA5D3;
} else if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D4) {
at91_soc_initdata.type = AT91_SOC_SAMA5D4;
}
break;
}
if (!at91_soc_is_detected())
return;
at91_soc_initdata.cidr = cidr;
/* sub version of soc */
if (!at91_soc_initdata.exid)
at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
if (at91_soc_initdata.type == AT91_SOC_SAMA5D4) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_SAMA5D41:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D41;
break;
case ARCH_EXID_SAMA5D42:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D42;
break;
case ARCH_EXID_SAMA5D43:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D43;
break;
case ARCH_EXID_SAMA5D44:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D44;
break;
}
}
}
static const char *soc_name[] = {
[AT91_SOC_RM9200] = "at91rm9200",
[AT91_SOC_SAM9260] = "at91sam9260",
[AT91_SOC_SAM9261] = "at91sam9261",
[AT91_SOC_SAM9263] = "at91sam9263",
[AT91_SOC_SAM9G10] = "at91sam9g10",
[AT91_SOC_SAM9G20] = "at91sam9g20",
[AT91_SOC_SAM9G45] = "at91sam9g45",
[AT91_SOC_SAM9RL] = "at91sam9rl",
[AT91_SOC_SAM9X5] = "at91sam9x5",
[AT91_SOC_SAM9N12] = "at91sam9n12",
[AT91_SOC_SAMA5D3] = "sama5d3",
[AT91_SOC_SAMA5D4] = "sama5d4",
[AT91_SOC_UNKNOWN] = "Unknown",
};
const char *at91_get_soc_type(struct at91_socinfo *c)
{
return soc_name[c->type];
}
EXPORT_SYMBOL(at91_get_soc_type);
static const char *soc_subtype_name[] = {
[AT91_SOC_RM9200_BGA] = "at91rm9200 BGA",
[AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP",
[AT91_SOC_SAM9XE] = "at91sam9xe",
[AT91_SOC_SAM9G45ES] = "at91sam9g45es",
[AT91_SOC_SAM9M10] = "at91sam9m10",
[AT91_SOC_SAM9G46] = "at91sam9g46",
[AT91_SOC_SAM9M11] = "at91sam9m11",
[AT91_SOC_SAM9G15] = "at91sam9g15",
[AT91_SOC_SAM9G35] = "at91sam9g35",
[AT91_SOC_SAM9X35] = "at91sam9x35",
[AT91_SOC_SAM9G25] = "at91sam9g25",
[AT91_SOC_SAM9X25] = "at91sam9x25",
[AT91_SOC_SAMA5D31] = "sama5d31",
[AT91_SOC_SAMA5D33] = "sama5d33",
[AT91_SOC_SAMA5D34] = "sama5d34",
[AT91_SOC_SAMA5D35] = "sama5d35",
[AT91_SOC_SAMA5D36] = "sama5d36",
[AT91_SOC_SAMA5D41] = "sama5d41",
[AT91_SOC_SAMA5D42] = "sama5d42",
[AT91_SOC_SAMA5D43] = "sama5d43",
[AT91_SOC_SAMA5D44] = "sama5d44",
[AT91_SOC_SUBTYPE_NONE] = "None",
[AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown",
};
const char *at91_get_soc_subtype(struct at91_socinfo *c)
{
return soc_subtype_name[c->subtype];
}
EXPORT_SYMBOL(at91_get_soc_subtype);
void __init at91_map_io(void)
{
/* Map peripherals */
iotable_init(&at91_io_desc, 1);
at91_soc_initdata.type = AT91_SOC_UNKNOWN;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
soc_detect(AT91_BASE_DBGU0);
if (!at91_soc_is_detected())
soc_detect(AT91_BASE_DBGU1);
if (!at91_soc_is_detected())
panic(pr_fmt("Impossible to detect the SOC type"));
pr_info("Detected soc type: %s\n",
at91_get_soc_type(&at91_soc_initdata));
if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
pr_info("Detected soc subtype: %s\n",
at91_get_soc_subtype(&at91_soc_initdata));
}
void __init at91_alt_map_io(void)
{
/* Map peripherals */
iotable_init(&at91_alt_io_desc, 1);
at91_soc_initdata.type = AT91_SOC_UNKNOWN;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
alt_soc_detect(AT91_BASE_DBGU2);
if (!at91_soc_is_detected())
panic("AT91: Impossible to detect the SOC type");
pr_info("AT91: Detected soc type: %s\n",
at91_get_soc_type(&at91_soc_initdata));
if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
pr_info("AT91: Detected soc subtype: %s\n",
at91_get_soc_subtype(&at91_soc_initdata));
}
void __iomem *at91_matrix_base;
EXPORT_SYMBOL_GPL(at91_matrix_base);
void __init at91_ioremap_matrix(u32 base_addr)
{
at91_matrix_base = ioremap(base_addr, 512);
if (!at91_matrix_base)
panic(pr_fmt("Impossible to ioremap at91_matrix_base\n"));
}

97
arch/arm/mach-at91/soc.c Normal file
View File

@ -0,0 +1,97 @@
/*
* Copyright (C) 2015 Atmel
*
* Alexandre Belloni <alexandre.belloni@free-electrons.com
* Boris Brezillon <boris.brezillon@free-electrons.com
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
*/
#define pr_fmt(fmt) "AT91: " fmt
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
#include <linux/sys_soc.h>
#include "soc.h"
#define AT91_DBGU_CIDR 0x40
#define AT91_DBGU_CIDR_VERSION(x) ((x) & 0x1f)
#define AT91_DBGU_CIDR_EXT BIT(31)
#define AT91_DBGU_CIDR_MATCH_MASK 0x7fffffe0
#define AT91_DBGU_EXID 0x44
struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
{
struct soc_device_attribute *soc_dev_attr;
const struct at91_soc *soc;
struct soc_device *soc_dev;
struct device_node *np;
void __iomem *regs;
u32 cidr, exid;
np = of_find_compatible_node(NULL, NULL, "atmel,at91rm9200-dbgu");
if (!np)
np = of_find_compatible_node(NULL, NULL,
"atmel,at91sam9260-dbgu");
if (!np) {
pr_warn("Could not find DBGU node");
return NULL;
}
regs = of_iomap(np, 0);
of_node_put(np);
if (!regs) {
pr_warn("Could not map DBGU iomem range");
return NULL;
}
cidr = readl(regs + AT91_DBGU_CIDR);
exid = readl(regs + AT91_DBGU_EXID);
iounmap(regs);
for (soc = socs; soc->name; soc++) {
if (soc->cidr_match != (cidr & AT91_DBGU_CIDR_MATCH_MASK))
continue;
if (!(cidr & AT91_DBGU_CIDR_EXT) || soc->exid_match == exid)
break;
}
if (!soc->name) {
pr_warn("Could not find matching SoC description\n");
return NULL;
}
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
if (!soc_dev_attr)
return NULL;
soc_dev_attr->family = soc->family;
soc_dev_attr->soc_id = soc->name;
soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X",
AT91_DBGU_CIDR_VERSION(cidr));
soc_dev = soc_device_register(soc_dev_attr);
if (IS_ERR(soc_dev)) {
kfree(soc_dev_attr->revision);
kfree(soc_dev_attr);
pr_warn("Could not register SoC device\n");
return NULL;
}
if (soc->family)
pr_info("Detected SoC family: %s\n", soc->family);
pr_info("Detected SoC: %s, revision %X\n", soc->name,
AT91_DBGU_CIDR_VERSION(cidr));
return soc_dev;
}

78
arch/arm/mach-at91/soc.h Normal file
View File

@ -0,0 +1,78 @@
/*
* Copyright (C) 2015 Atmel
*
* Boris Brezillon <boris.brezillon@free-electrons.com
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
*/
#ifndef __AT91_SOC_H
#define __AT91_SOC_H
#include <linux/sys_soc.h>
struct at91_soc {
u32 cidr_match;
u32 exid_match;
const char *name;
const char *family;
};
#define AT91_SOC(__cidr, __exid, __name, __family) \
{ \
.cidr_match = (__cidr), \
.exid_match = (__exid), \
.name = (__name), \
.family = (__family), \
}
struct soc_device * __init
at91_soc_init(const struct at91_soc *socs);
#define AT91RM9200_CIDR_MATCH 0x09290780
#define AT91SAM9260_CIDR_MATCH 0x019803a0
#define AT91SAM9261_CIDR_MATCH 0x019703a0
#define AT91SAM9263_CIDR_MATCH 0x019607a0
#define AT91SAM9G20_CIDR_MATCH 0x019905a0
#define AT91SAM9RL64_CIDR_MATCH 0x019b03a0
#define AT91SAM9G45_CIDR_MATCH 0x019b05a0
#define AT91SAM9X5_CIDR_MATCH 0x019a05a0
#define AT91SAM9N12_CIDR_MATCH 0x019a07a0
#define AT91SAM9M11_EXID_MATCH 0x00000001
#define AT91SAM9M10_EXID_MATCH 0x00000002
#define AT91SAM9G46_EXID_MATCH 0x00000003
#define AT91SAM9G45_EXID_MATCH 0x00000004
#define AT91SAM9G15_EXID_MATCH 0x00000000
#define AT91SAM9G35_EXID_MATCH 0x00000001
#define AT91SAM9X35_EXID_MATCH 0x00000002
#define AT91SAM9G25_EXID_MATCH 0x00000003
#define AT91SAM9X25_EXID_MATCH 0x00000004
#define AT91SAM9CN12_EXID_MATCH 0x00000005
#define AT91SAM9N12_EXID_MATCH 0x00000006
#define AT91SAM9CN11_EXID_MATCH 0x00000009
#define AT91SAM9XE128_CIDR_MATCH 0x329973a0
#define AT91SAM9XE256_CIDR_MATCH 0x329a93a0
#define AT91SAM9XE512_CIDR_MATCH 0x329aa3a0
#define SAMA5D3_CIDR_MATCH 0x0a5c07c0
#define SAMA5D31_EXID_MATCH 0x00444300
#define SAMA5D33_EXID_MATCH 0x00414300
#define SAMA5D34_EXID_MATCH 0x00414301
#define SAMA5D35_EXID_MATCH 0x00584300
#define SAMA5D36_EXID_MATCH 0x00004301
#define SAMA5D4_CIDR_MATCH 0x0a5c07c0
#define SAMA5D41_EXID_MATCH 0x00000001
#define SAMA5D42_EXID_MATCH 0x00000002
#define SAMA5D43_EXID_MATCH 0x00000003
#define SAMA5D44_EXID_MATCH 0x00000004
#endif /* __AT91_SOC_H */

7
arch/arm/mach-davinci/asp.h
View File

@ -21,6 +21,9 @@
/* Bases of da830 McASP1 register banks */
#define DAVINCI_DA830_MCASP1_REG_BASE 0x01D04000
/* Bases of da830 McASP2 register banks */
#define DAVINCI_DA830_MCASP2_REG_BASE 0x01D08000
/* EDMA channels of dm644x and dm355 */
#define DAVINCI_DMA_ASP0_TX 2
#define DAVINCI_DMA_ASP0_RX 3
@ -40,6 +43,10 @@
#define DAVINCI_DA830_DMA_MCASP1_AREVT 2
#define DAVINCI_DA830_DMA_MCASP1_AXEVT 3
/* EDMA channels of da830 McASP2 */
#define DAVINCI_DA830_DMA_MCASP2_AREVT 4
#define DAVINCI_DA830_DMA_MCASP2_AXEVT 5
/* Interrupts */
#define DAVINCI_ASP0_RX_INT IRQ_MBRINT
#define DAVINCI_ASP0_TX_INT IRQ_MBXINT

80
arch/arm/mach-davinci/devices-da8xx.c
View File

@ -463,16 +463,23 @@ static struct resource da830_mcasp1_resources[] = {
},
/* TX event */
{
.name = "tx",
.start = DAVINCI_DA830_DMA_MCASP1_AXEVT,
.end = DAVINCI_DA830_DMA_MCASP1_AXEVT,
.flags = IORESOURCE_DMA,
},
/* RX event */
{
.name = "rx",
.start = DAVINCI_DA830_DMA_MCASP1_AREVT,
.end = DAVINCI_DA830_DMA_MCASP1_AREVT,
.flags = IORESOURCE_DMA,
},
{
.name = "common",
.start = IRQ_DA8XX_MCASPINT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device da830_mcasp1_device = {
@ -482,6 +489,41 @@ static struct platform_device da830_mcasp1_device = {
.resource = da830_mcasp1_resources,
};
static struct resource da830_mcasp2_resources[] = {
{
.name = "mpu",
.start = DAVINCI_DA830_MCASP2_REG_BASE,
.end = DAVINCI_DA830_MCASP2_REG_BASE + (SZ_1K * 12) - 1,
.flags = IORESOURCE_MEM,
},
/* TX event */
{
.name = "tx",
.start = DAVINCI_DA830_DMA_MCASP2_AXEVT,
.end = DAVINCI_DA830_DMA_MCASP2_AXEVT,
.flags = IORESOURCE_DMA,
},
/* RX event */
{
.name = "rx",
.start = DAVINCI_DA830_DMA_MCASP2_AREVT,
.end = DAVINCI_DA830_DMA_MCASP2_AREVT,
.flags = IORESOURCE_DMA,
},
{
.name = "common",
.start = IRQ_DA8XX_MCASPINT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device da830_mcasp2_device = {
.name = "davinci-mcasp",
.id = 2,
.num_resources = ARRAY_SIZE(da830_mcasp2_resources),
.resource = da830_mcasp2_resources,
};
static struct resource da850_mcasp_resources[] = {
{
.name = "mpu",
@ -491,16 +533,23 @@ static struct resource da850_mcasp_resources[] = {
},
/* TX event */
{
.name = "tx",
.start = DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
.end = DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
.flags = IORESOURCE_DMA,
},
/* RX event */
{
.name = "rx",
.start = DAVINCI_DA8XX_DMA_MCASP0_AREVT,
.end = DAVINCI_DA8XX_DMA_MCASP0_AREVT,
.flags = IORESOURCE_DMA,
},
{
.name = "common",
.start = IRQ_DA8XX_MCASPINT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device da850_mcasp_device = {
@ -512,14 +561,31 @@ static struct platform_device da850_mcasp_device = {
void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
{
/* DA830/OMAP-L137 has 3 instances of McASP */
if (cpu_is_davinci_da830() && id == 1) {
da830_mcasp1_device.dev.platform_data = pdata;
platform_device_register(&da830_mcasp1_device);
} else if (cpu_is_davinci_da850()) {
da850_mcasp_device.dev.platform_data = pdata;
platform_device_register(&da850_mcasp_device);
struct platform_device *pdev;
switch (id) {
case 0:
/* Valid for DA830/OMAP-L137 or DA850/OMAP-L138 */
pdev = &da850_mcasp_device;
break;
case 1:
/* Valid for DA830/OMAP-L137 only */
if (!cpu_is_davinci_da830())
return;
pdev = &da830_mcasp1_device;
break;
case 2:
/* Valid for DA830/OMAP-L137 only */
if (!cpu_is_davinci_da830())
return;
pdev = &da830_mcasp2_device;
break;
default:
return;
}
pdev->dev.platform_data = pdata;
platform_device_register(pdev);
}
static struct resource da8xx_pruss_resources[] = {

24
arch/arm/mach-davinci/dm646x.c
View File

@ -493,7 +493,6 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
[IRQ_DM646X_EMACMISCINT] = 7,
[IRQ_DM646X_MCASP0TXINT] = 7,
[IRQ_DM646X_MCASP0RXINT] = 7,
[IRQ_AEMIFINT] = 7,
[IRQ_DM646X_RESERVED_3] = 7,
[IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */
[IRQ_TINT0_TINT34] = 7, /* clocksource */
@ -610,19 +609,31 @@ static struct resource dm646x_mcasp0_resources[] = {
.end = DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1,
.flags = IORESOURCE_MEM,
},
/* first TX, then RX */
{
.name = "tx",
.start = DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
.end = DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
.flags = IORESOURCE_DMA,
},
{
.name = "rx",
.start = DAVINCI_DM646X_DMA_MCASP0_AREVT0,
.end = DAVINCI_DM646X_DMA_MCASP0_AREVT0,
.flags = IORESOURCE_DMA,
},
{
.name = "tx",
.start = IRQ_DM646X_MCASP0TXINT,
.flags = IORESOURCE_IRQ,
},
{
.name = "rx",
.start = IRQ_DM646X_MCASP0RXINT,
.flags = IORESOURCE_IRQ,
},
};
/* DIT mode only, rx is not supported */
static struct resource dm646x_mcasp1_resources[] = {
{
.name = "mpu",
@ -630,17 +641,16 @@ static struct resource dm646x_mcasp1_resources[] = {
.end = DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1,
.flags = IORESOURCE_MEM,
},
/* DIT mode, only TX event */
{
.name = "tx",
.start = DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
.end = DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
.flags = IORESOURCE_DMA,
},
/* DIT mode, dummy entry */
{
.start = -1,
.end = -1,
.flags = IORESOURCE_DMA,
.name = "tx",
.start = IRQ_DM646X_MCASP1TXINT,
.flags = IORESOURCE_IRQ,
},
};

2
arch/arm/mach-davinci/include/mach/irqs.h
View File

@ -129,8 +129,8 @@
#define IRQ_DM646X_EMACMISCINT 27
#define IRQ_DM646X_MCASP0TXINT 28
#define IRQ_DM646X_MCASP0RXINT 29
#define IRQ_DM646X_MCASP1TXINT 30
#define IRQ_DM646X_RESERVED_3 31
#define IRQ_DM646X_MCASP1TXINT 32
#define IRQ_DM646X_VLQINT 38
#define IRQ_DM646X_UARTINT2 42
#define IRQ_DM646X_SPINT0 43

81
arch/arm/mach-imx/Kconfig
View File

@ -77,13 +77,6 @@ config SOC_IMX21
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
config SOC_IMX25
bool
select ARCH_MXC_IOMUX_V3
select CPU_ARM926T
select MXC_AVIC
select PINCTRL_IMX25
config SOC_IMX27
bool
select CPU_ARM926T
@ -149,62 +142,6 @@ config MACH_MX21ADS
Include support for MX21ADS platform. This includes specific
configurations for the board and its peripherals.
comment "MX25 platforms:"
config MACH_MX25_3DS
bool "Support MX25PDK (3DS) Platform"
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select SOC_IMX25
config MACH_EUKREA_CPUIMX25SD
bool "Support Eukrea CPUIMX25 Platform"
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX25
choice
prompt "Baseboard"
depends on MACH_EUKREA_CPUIMX25SD
default MACH_EUKREA_MBIMXSD25_BASEBOARD
config MACH_EUKREA_MBIMXSD25_BASEBOARD
bool "Eukrea MBIMXSD development board"
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
endchoice
config MACH_IMX25_DT
bool "Support i.MX25 platforms from device tree"
select SOC_IMX25
help
Include support for Freescale i.MX25 based platforms
using the device tree for discovery
comment "MX27 platforms:"
config MACH_MX27ADS
@ -557,6 +494,20 @@ config MACH_VPR200
endif
if ARCH_MULTI_V5
comment "Device tree only"
config SOC_IMX25
bool "i.MX25 support"
select ARCH_MXC_IOMUX_V3
select CPU_ARM926T
select MXC_AVIC
select PINCTRL_IMX25
help
This enables support for Freescale i.MX25 processor
endif
if ARCH_MULTI_V7
comment "Device tree only"
@ -637,7 +588,7 @@ config SOC_VF610
select PL310_ERRATA_769419 if CACHE_L2X0
help
This enable support for Freescale Vybrid VF610 processor.
This enables support for Freescale Vybrid VF610 processor.
choice
prompt "Clocksource for scheduler clock"
@ -667,7 +618,7 @@ config SOC_LS1021A
select ZONE_DMA if ARM_LPAE
help
This enable support for Freescale LS1021A processor.
This enables support for Freescale LS1021A processor.
endif

8
arch/arm/mach-imx/Makefile
View File

@ -3,7 +3,7 @@ obj-y := time.o cpu.o system.o irq-common.o
obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
obj-$(CONFIG_SOC_IMX25) += clk-imx25.o cpu-imx25.o mach-imx25.o
obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
@ -48,12 +48,6 @@ obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
# i.MX21 based machines
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
# i.MX25 based machines
obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
# i.MX27 based machines
obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o

75
arch/arm/mach-imx/clk-imx25.c
View File

@ -30,7 +30,6 @@
#include "clk.h"
#include "common.h"
#include "hardware.h"
#include "mx25.h"
#define CCM_MPCTL 0x00
#define CCM_UPCTL 0x04
@ -239,80 +238,6 @@ static int __init __mx25_clocks_init(unsigned long osc_rate,
return 0;
}
int __init mx25_clocks_init(void)
{
void __iomem *ccm;
ccm = ioremap(MX25_CRM_BASE_ADDR, SZ_16K);
__mx25_clocks_init(24000000, ccm);
clk_register_clkdev(clk[gpt1_ipg], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
/* i.mx25 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0");
clk_register_clkdev(clk[uart2_ipg], "ipg", "imx21-uart.1");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.1");
clk_register_clkdev(clk[uart3_ipg], "ipg", "imx21-uart.2");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.2");
clk_register_clkdev(clk[uart4_ipg], "ipg", "imx21-uart.3");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.3");
clk_register_clkdev(clk[uart5_ipg], "ipg", "imx21-uart.4");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.4");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.0");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.1");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
/* i.mx25 has the i.mx35 type cspi */
clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1");
clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2");
clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad");
clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc");
clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0");
clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.1");
clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0");
clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0");
clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0");
clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx21-fb.0");
clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx21-fb.0");
clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx21-fb.0");
clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");
clk_register_clkdev(clk[esdhc2_ipg_per], "per", "sdhci-esdhc-imx25.1");
clk_register_clkdev(clk[esdhc2_ipg], "ipg", "sdhci-esdhc-imx25.1");
clk_register_clkdev(clk[esdhc2_ahb], "ahb", "sdhci-esdhc-imx25.1");
clk_register_clkdev(clk[csi_ipg_per], "per", "imx25-camera.0");
clk_register_clkdev(clk[csi_ipg], "ipg", "imx25-camera.0");
clk_register_clkdev(clk[csi_ahb], "ahb", "imx25-camera.0");
clk_register_clkdev(clk[dummy], "audmux", NULL);
clk_register_clkdev(clk[can1_ipg], NULL, "flexcan.0");
clk_register_clkdev(clk[can2_ipg], NULL, "flexcan.1");
/* i.mx25 has the i.mx35 type sdma */
clk_register_clkdev(clk[sdma_ipg], "ipg", "imx35-sdma");
clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
clk_register_clkdev(clk[iim_ipg], "iim", NULL);
mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1);
return 0;
}
static void __init mx25_clocks_init_dt(struct device_node *np)
{
struct device_node *refnp;

5
arch/arm/mach-imx/common.h
View File

@ -23,13 +23,11 @@ struct of_device_id;
void mx1_map_io(void);
void mx21_map_io(void);
void mx25_map_io(void);
void mx27_map_io(void);
void mx31_map_io(void);
void mx35_map_io(void);
void imx1_init_early(void);
void imx21_init_early(void);
void imx25_init_early(void);
void imx27_init_early(void);
void imx31_init_early(void);
void imx35_init_early(void);
@ -37,13 +35,11 @@ void mxc_init_irq(void __iomem *);
void tzic_init_irq(void);
void mx1_init_irq(void);
void mx21_init_irq(void);
void mx25_init_irq(void);
void mx27_init_irq(void);
void mx31_init_irq(void);
void mx35_init_irq(void);
void imx1_soc_init(void);
void imx21_soc_init(void);
void imx25_soc_init(void);
void imx27_soc_init(void);
void imx31_soc_init(void);
void imx35_soc_init(void);
@ -51,7 +47,6 @@ void epit_timer_init(void __iomem *base, int irq);
void mxc_timer_init(void __iomem *, int);
int mx1_clocks_init(unsigned long fref);
int mx21_clocks_init(unsigned long lref, unsigned long fref);
int mx25_clocks_init(void);
int mx27_clocks_init(unsigned long fref);
int mx31_clocks_init(unsigned long fref);
int mx35_clocks_init(void);

11
arch/arm/mach-imx/cpu-imx25.c
View File

@ -11,6 +11,8 @@
*/
#include <linux/module.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include "iim.h"
#include "hardware.h"
@ -20,8 +22,15 @@ static int mx25_cpu_rev = -1;
static int mx25_read_cpu_rev(void)
{
u32 rev;
void __iomem *iim_base;
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim");
iim_base = of_iomap(np, 0);
BUG_ON(!iim_base);
rev = readl(iim_base + MXC_IIMSREV);
iounmap(iim_base);
rev = __raw_readl(MX25_IO_ADDRESS(MX25_IIM_BASE_ADDR + MXC_IIMSREV));
switch (rev) {
case 0x00:
return IMX_CHIP_REVISION_1_0;

85
arch/arm/mach-imx/devices-imx25.h
View File

@ -1,85 +0,0 @@
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include "devices/devices-common.h"
extern const struct imx_fec_data imx25_fec_data;
#define imx25_add_fec(pdata) \
imx_add_fec(&imx25_fec_data, pdata)
extern const struct imx_flexcan_data imx25_flexcan_data[];
#define imx25_add_flexcan(id) \
imx_add_flexcan(&imx25_flexcan_data[id])
#define imx25_add_flexcan0() imx25_add_flexcan(0)
#define imx25_add_flexcan1() imx25_add_flexcan(1)
extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data;
#define imx25_add_fsl_usb2_udc(pdata) \
imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data;
#define imx25_add_imxdi_rtc() \
imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data;
#define imx25_add_imx2_wdt() \
imx_add_imx2_wdt(&imx25_imx2_wdt_data)
extern const struct imx_imx_fb_data imx25_imx_fb_data;
#define imx25_add_imx_fb(pdata) \
imx_add_imx_fb(&imx25_imx_fb_data, pdata)
extern const struct imx_imx_i2c_data imx25_imx_i2c_data[];
#define imx25_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
#define imx25_add_imx_i2c0(pdata) imx25_add_imx_i2c(0, pdata)
#define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata)
#define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata)
extern const struct imx_imx_keypad_data imx25_imx_keypad_data;
#define imx25_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx25_imx_keypad_data, pdata)
extern const struct imx_imx_ssi_data imx25_imx_ssi_data[];
#define imx25_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[];
#define imx25_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
#define imx25_add_imx_uart0(pdata) imx25_add_imx_uart(0, pdata)
#define imx25_add_imx_uart1(pdata) imx25_add_imx_uart(1, pdata)
#define imx25_add_imx_uart2(pdata) imx25_add_imx_uart(2, pdata)
#define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata)
#define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata)
extern const struct imx_mx2_camera_data imx25_mx2_camera_data;
#define imx25_add_mx2_camera(pdata) \
imx_add_mx2_camera(&imx25_mx2_camera_data, pdata)
extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data;
#define imx25_add_mxc_ehci_otg(pdata) \
imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata)
extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data;
#define imx25_add_mxc_ehci_hs(pdata) \
imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata)
extern const struct imx_mxc_nand_data imx25_mxc_nand_data;
#define imx25_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
extern const struct imx_sdhci_esdhc_imx_data imx25_sdhci_esdhc_imx_data[];
#define imx25_add_sdhci_esdhc_imx(id, pdata) \
imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata)
extern const struct imx_spi_imx_data imx25_cspi_data[];
#define imx25_add_spi_imx(id, pdata) \
imx_add_spi_imx(&imx25_cspi_data[id], pdata)
#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata)
#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata)
#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata)

3
arch/arm/mach-imx/devices/Kconfig
View File

@ -21,9 +21,6 @@ config IMX_HAVE_PLATFORM_IMX27_CODA
config IMX_HAVE_PLATFORM_IMX2_WDT
bool
config IMX_HAVE_PLATFORM_IMXDI_RTC
bool
config IMX_HAVE_PLATFORM_IMX_FB
bool

1
arch/arm/mach-imx/devices/Makefile
View File

@ -8,7 +8,6 @@ obj-y += platform-gpio-mxc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o
obj-y += platform-imx-dma.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o

5
arch/arm/mach-imx/devices/platform-fec.c
View File

@ -19,11 +19,6 @@
.irq = soc ## _INT_FEC, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_fec_data imx25_fec_data __initconst =
imx_fec_data_entry_single(MX25, "imx25-fec");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_fec_data imx27_fec_data __initconst =
imx_fec_data_entry_single(MX27, "imx27-fec");

5
arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
View File

@ -18,11 +18,6 @@
.irq = soc ## _INT_USB_OTG, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");

5
arch/arm/mach-imx/devices/platform-imx-fb.c
View File

@ -29,11 +29,6 @@ const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_imx_fb_data imx25_imx_fb_data __initconst =
imx_imx_fb_data_entry_single(MX25, "imx21-fb", SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K);

10
arch/arm/mach-imx/devices/platform-imx-i2c.c
View File

@ -31,16 +31,6 @@ const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
#define imx25_imx_i2c_data_entry(_id, _hwid) \
imx_imx_i2c_data_entry(MX25, "imx21-i2c", _id, _hwid, SZ_16K)
imx25_imx_i2c_data_entry(0, 1),
imx25_imx_i2c_data_entry(1, 2),
imx25_imx_i2c_data_entry(2, 3),
};
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
#define imx27_imx_i2c_data_entry(_id, _hwid) \

5
arch/arm/mach-imx/devices/platform-imx-keypad.c
View File

@ -21,11 +21,6 @@ const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX21, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX25, SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX27, SZ_16);

9
arch/arm/mach-imx/devices/platform-imx-ssi.c
View File

@ -30,15 +30,6 @@ const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = {
};
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = {
#define imx25_imx_ssi_data_entry(_id, _hwid) \
imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K)
imx25_imx_ssi_data_entry(0, 1),
imx25_imx_ssi_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
#define imx27_imx_ssi_data_entry(_id, _hwid) \

12
arch/arm/mach-imx/devices/platform-imx-uart.c
View File

@ -47,18 +47,6 @@ const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
};
#endif
#ifdef CONFIG_SOC_IMX25
const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = {
#define imx25_imx_uart_data_entry(_id, _hwid) \
imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K)
imx25_imx_uart_data_entry(0, 1),
imx25_imx_uart_data_entry(1, 2),
imx25_imx_uart_data_entry(2, 3),
imx25_imx_uart_data_entry(3, 4),
imx25_imx_uart_data_entry(4, 5),
};
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
#define imx27_imx_uart_data_entry(_id, _hwid) \

5
arch/arm/mach-imx/devices/platform-imx2-wdt.c
View File

@ -25,11 +25,6 @@ const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst =
imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst =
imx_imx2_wdt_data_entry_single(MX25, 0, , SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst =
imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K);

42
arch/arm/mach-imx/devices/platform-imxdi_rtc.c
View File

@ -1,42 +0,0 @@
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <asm/sizes.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_imxdi_rtc_data_entry_single(soc) \
{ \
.iobase = soc ## _DRYICE_BASE_ADDR, \
.irq = soc ## _INT_DRYICE, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst =
imx_imxdi_rtc_data_entry_single(MX25);
#endif /* ifdef CONFIG_SOC_IMX25 */
struct platform_device *__init imx_add_imxdi_rtc(
const struct imx_imxdi_rtc_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device("imxdi_rtc", 0,
res, ARRAY_SIZE(res), NULL, 0);
}

5
arch/arm/mach-imx/devices/platform-mx2-camera.c
View File

@ -27,11 +27,6 @@
.irqemmaprp = soc ## _INT_EMMAPRP, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst =
imx_mx2_camera_data_entry_single(MX25, "imx25-camera");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst =
imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera");

7
arch/arm/mach-imx/devices/platform-mxc-ehci.c
View File

@ -18,13 +18,6 @@
.irq = soc ## _INT_USB_ ## hs, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst =
imx_mxc_ehci_data_entry_single(MX25, 0, OTG);
const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst =
imx_mxc_ehci_data_entry_single(MX25, 1, HS);
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst =
imx_mxc_ehci_data_entry_single(MX27, 0, OTG);

5
arch/arm/mach-imx/devices/platform-mxc_nand.c
View File

@ -34,11 +34,6 @@ const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX25, "imx25-nand", SZ_8K);
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K);

11
arch/arm/mach-imx/devices/platform-spi_imx.c
View File

@ -39,17 +39,6 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
};
#endif
#ifdef CONFIG_SOC_IMX25
/* i.mx25 has the i.mx35 type cspi */
const struct imx_spi_imx_data imx25_cspi_data[] __initconst = {
#define imx25_cspi_data_entry(_id, _hwid) \
imx_spi_imx_data_entry(MX25, CSPI, "imx35-cspi", _id, _hwid, SZ_16K)
imx25_cspi_data_entry(0, 1),
imx25_cspi_data_entry(1, 2),
imx25_cspi_data_entry(2, 3),
};
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
#define imx27_cspi_data_entry(_id, _hwid) \

99
arch/arm/mach-imx/ehci-imx25.c
View File

@ -1,99 +0,0 @@
/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX25_OTG_SIC_SHIFT 29
#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT)
#define MX25_OTG_PM_BIT (1 << 24)
#define MX25_OTG_PP_BIT (1 << 11)
#define MX25_OTG_OCPOL_BIT (1 << 3)
#define MX25_H1_SIC_SHIFT 21
#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT)
#define MX25_H1_PP_BIT (1 << 18)
#define MX25_H1_PM_BIT (1 << 16)
#define MX25_H1_IPPUE_UP_BIT (1 << 7)
#define MX25_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX25_H1_TLL_BIT (1 << 5)
#define MX25_H1_USBTE_BIT (1 << 4)
#define MX25_H1_OCPOL_BIT (1 << 2)
int mx25_initialize_usb_hw(int port, unsigned int flags)
{
unsigned int v;
v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT |
MX25_OTG_OCPOL_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX25_OTG_PM_BIT;
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MX25_OTG_PP_BIT;
if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
v |= MX25_OTG_OCPOL_BIT;
break;
case 1: /* H1 port */
v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT |
MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT |
MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX25_H1_PM_BIT;
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MX25_H1_PP_BIT;
if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
v |= MX25_H1_OCPOL_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX25_H1_TLL_BIT;
if (flags & MXC_EHCI_INTERNAL_PHY)
v |= MX25_H1_USBTE_BIT;
if (flags & MXC_EHCI_IPPUE_DOWN)
v |= MX25_H1_IPPUE_DOWN_BIT;
if (flags & MXC_EHCI_IPPUE_UP)
v |= MX25_H1_IPPUE_UP_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
return 0;
}

310
arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
View File

@ -1,310 +0,0 @@
/*
* Copyright (C) 2010 Eric Benard - eric@eukrea.com
*
* Based on pcm970-baseboard.c which is :
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/spi/spi.h>
#include <video/platform_lcd.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "common.h"
#include "devices-imx25.h"
#include "hardware.h"
#include "iomux-mx25.h"
#include "mx25.h"
static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
/* LCD */
MX25_PAD_LD0__LD0,
MX25_PAD_LD1__LD1,
MX25_PAD_LD2__LD2,
MX25_PAD_LD3__LD3,
MX25_PAD_LD4__LD4,
MX25_PAD_LD5__LD5,
MX25_PAD_LD6__LD6,
MX25_PAD_LD7__LD7,
MX25_PAD_LD8__LD8,
MX25_PAD_LD9__LD9,
MX25_PAD_LD10__LD10,
MX25_PAD_LD11__LD11,
MX25_PAD_LD12__LD12,
MX25_PAD_LD13__LD13,
MX25_PAD_LD14__LD14,
MX25_PAD_LD15__LD15,
MX25_PAD_GPIO_E__LD16,
MX25_PAD_GPIO_F__LD17,
MX25_PAD_HSYNC__HSYNC,
MX25_PAD_VSYNC__VSYNC,
MX25_PAD_LSCLK__LSCLK,
MX25_PAD_OE_ACD__OE_ACD,
MX25_PAD_CONTRAST__CONTRAST,
/* LCD_PWR */
MX25_PAD_PWM__GPIO_1_26,
/* LED */
MX25_PAD_POWER_FAIL__GPIO_3_19,
/* SWITCH */
MX25_PAD_VSTBY_ACK__GPIO_3_18,
/* UART2 */
MX25_PAD_UART2_RTS__UART2_RTS,
MX25_PAD_UART2_CTS__UART2_CTS,
MX25_PAD_UART2_TXD__UART2_TXD,
MX25_PAD_UART2_RXD__UART2_RXD,
/* SD1 */
MX25_PAD_SD1_CMD__SD1_CMD,
MX25_PAD_SD1_CLK__SD1_CLK,
MX25_PAD_SD1_DATA0__SD1_DATA0,
MX25_PAD_SD1_DATA1__SD1_DATA1,
MX25_PAD_SD1_DATA2__SD1_DATA2,
MX25_PAD_SD1_DATA3__SD1_DATA3,
/* SD1 CD */
MX25_PAD_DE_B__GPIO_2_20,
/* I2S */
MX25_PAD_KPP_COL3__AUD5_TXFS,
MX25_PAD_KPP_COL2__AUD5_TXC,
MX25_PAD_KPP_COL1__AUD5_RXD,
MX25_PAD_KPP_COL0__AUD5_TXD,
/* CAN */
MX25_PAD_GPIO_D__CAN2_RX,
MX25_PAD_GPIO_C__CAN2_TX,
/* SPI1 */
MX25_PAD_CSPI1_MOSI__CSPI1_MOSI,
MX25_PAD_CSPI1_MISO__CSPI1_MISO,
MX25_PAD_CSPI1_SS0__GPIO_1_16,
MX25_PAD_CSPI1_SS1__GPIO_1_17,
MX25_PAD_CSPI1_SCLK__CSPI1_SCLK,
MX25_PAD_CSPI1_RDY__GPIO_2_22,
};
#define GPIO_LED1 IMX_GPIO_NR(3, 19)
#define GPIO_SWITCH1 IMX_GPIO_NR(3, 18)
#define GPIO_SD1CD IMX_GPIO_NR(2, 20)
#define GPIO_LCDPWR IMX_GPIO_NR(1, 26)
#define GPIO_SPI1_SS0 IMX_GPIO_NR(1, 16)
#define GPIO_SPI1_SS1 IMX_GPIO_NR(1, 17)
#define GPIO_SPI1_IRQ IMX_GPIO_NR(2, 22)
static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
{
.mode = {
.name = "CMO-QVGA",
.refresh = 60,
.xres = 320,
.yres = 240,
.pixclock = KHZ2PICOS(6500),
.left_margin = 30,
.right_margin = 38,
.upper_margin = 20,
.lower_margin = 3,
.hsync_len = 15,
.vsync_len = 4,
},
.bpp = 16,
.pcr = 0xCAD08B80,
}, {
.mode = {
.name = "DVI-VGA",
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 32000,
.hsync_len = 7,
.left_margin = 100,
.right_margin = 100,
.vsync_len = 7,
.upper_margin = 7,
.lower_margin = 100,
},
.pcr = 0xFA208B80,
.bpp = 16,
}, {
.mode = {
.name = "DVI-SVGA",
.refresh = 60,
.xres = 800,
.yres = 600,
.pixclock = 25000,
.hsync_len = 7,
.left_margin = 75,
.right_margin = 75,
.vsync_len = 7,
.upper_margin = 7,
.lower_margin = 75,
},
.pcr = 0xFA208B80,
.bpp = 16,
},
};
static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = {
.mode = eukrea_mximxsd_modes,
.num_modes = ARRAY_SIZE(eukrea_mximxsd_modes),
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00040060,
};
static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
unsigned int power)
{
if (power)
gpio_direction_output(GPIO_LCDPWR, 1);
else
gpio_direction_output(GPIO_LCDPWR, 0);
}
static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
.set_power = eukrea_mbimxsd_lcd_power_set,
};
static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
.name = "platform-lcd",
.dev.platform_data = &eukrea_mbimxsd_lcd_power_data,
};
static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
{
.name = "led1",
.default_trigger = "heartbeat",
.active_low = 1,
.gpio = GPIO_LED1,
},
};
static const struct gpio_led_platform_data
eukrea_mbimxsd_led_info __initconst = {
.leds = eukrea_mbimxsd_leds,
.num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
};
static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
{
.gpio = GPIO_SWITCH1,
.code = BTN_0,
.desc = "BP1",
.active_low = 1,
.wakeup = 1,
},
};
static const struct gpio_keys_platform_data
eukrea_mbimxsd_button_data __initconst = {
.buttons = eukrea_mbimxsd_gpio_buttons,
.nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
};
static struct platform_device *platform_devices[] __initdata = {
&eukrea_mbimxsd_lcd_powerdev,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
{
I2C_BOARD_INFO("tlv320aic23", 0x1a),
},
};
static const
struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
};
static struct esdhc_platform_data sd1_pdata = {
.cd_gpio = GPIO_SD1CD,
.cd_type = ESDHC_CD_GPIO,
.wp_type = ESDHC_WP_NONE,
};
static struct spi_board_info eukrea_mbimxsd25_spi_board_info[] __initdata = {
{
.modalias = "spidev",
.max_speed_hz = 20000000,
.bus_num = 0,
.chip_select = 0,
.mode = SPI_MODE_0,
},
{
.modalias = "spidev",
.max_speed_hz = 20000000,
.bus_num = 0,
.chip_select = 1,
.mode = SPI_MODE_0,
},
};
static int eukrea_mbimxsd25_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
static const struct spi_imx_master eukrea_mbimxsd25_spi0_data __initconst = {
.chipselect = eukrea_mbimxsd25_spi_cs,
.num_chipselect = ARRAY_SIZE(eukrea_mbimxsd25_spi_cs),
};
/*
* system init for baseboard usage. Will be called by cpuimx25 init.
*
* Add platform devices present on this baseboard and init
* them from CPU side as far as required to use them later on
*/
void __init eukrea_mbimxsd25_baseboard_init(void)
{
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
ARRAY_SIZE(eukrea_mbimxsd_pads)))
printk(KERN_ERR "error setting mbimxsd pads !\n");
imx25_add_imx_uart1(&uart_pdata);
imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
imx25_add_flexcan1();
imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
gpio_request(GPIO_LED1, "LED1");
gpio_direction_output(GPIO_LED1, 1);
gpio_free(GPIO_LED1);
gpio_request(GPIO_SWITCH1, "SWITCH1");
gpio_direction_input(GPIO_SWITCH1);
gpio_free(GPIO_SWITCH1);
gpio_request(GPIO_LCDPWR, "LCDPWR");
gpio_direction_output(GPIO_LCDPWR, 1);
i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
gpio_direction_input(GPIO_SPI1_IRQ);
gpio_free(GPIO_SPI1_IRQ);
imx25_add_spi_imx0(&eukrea_mbimxsd25_spi0_data);
spi_register_board_info(eukrea_mbimxsd25_spi_board_info,
ARRAY_SIZE(eukrea_mbimxsd25_spi_board_info));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
}

2
arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
View File

@ -100,7 +100,7 @@ static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.num_modes = ARRAY_SIZE(fb_modedb),
};
static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
static const iomux_v3_cfg_t eukrea_mbimxsd_pads[] __initconst = {
/* LCD */
MX35_PAD_LD0__IPU_DISPB_DAT_0,
MX35_PAD_LD1__IPU_DISPB_DAT_1,

1
arch/arm/mach-imx/hardware.h
View File

@ -112,7 +112,6 @@
#include "mx21.h"
#include "mx27.h"
#include "mx1.h"
#include "mx25.h"
#define imx_map_entry(soc, name, _type) { \
.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \

524
arch/arm/mach-imx/iomux-mx25.h
View File

@ -1,524 +0,0 @@
/*
* arch/arm/plat-mxc/include/mach/iomux-mx25.h
*
* Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de>
*
* based on arch/arm/mach-mx25/mx25_pins.h
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
* and
* arch/arm/plat-mxc/include/mach/iomux-mx35.h
* Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#ifndef __MACH_IOMUX_MX25_H__
#define __MACH_IOMUX_MX25_H__
#include "iomux-v3.h"
/*
* IOMUX/PAD Bit field definitions
*/
#define MX25_PAD_A10__A10 IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A10__GPIO_4_0 IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A13__A13 IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A13__GPIO_4_1 IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A14__A14 IOMUX_PAD(0x230, 0x010, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A14__GPIO_2_0 IOMUX_PAD(0x230, 0x010, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A15__A15 IOMUX_PAD(0x234, 0x014, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A15__GPIO_2_1 IOMUX_PAD(0x234, 0x014, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A16__A16 IOMUX_PAD(0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A16__GPIO_2_2 IOMUX_PAD(0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A17__A17 IOMUX_PAD(0x238, 0x01c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A17__GPIO_2_3 IOMUX_PAD(0x238, 0x01c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A18__A18 IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A18__GPIO_2_4 IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL)
#define MX25_PAD_A19__A19 IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL)
#define MX25_PAD_A19__GPIO_2_5 IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A20__A20 IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A20__GPIO_2_6 IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL)
#define MX25_PAD_A21__A21 IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A21__GPIO_2_7 IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL)
#define MX25_PAD_A22__A22 IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A22__GPIO_2_8 IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A23__A23 IOMUX_PAD(0x24c, 0x034, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A23__GPIO_2_9 IOMUX_PAD(0x24c, 0x034, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A24__A24 IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A24__GPIO_2_10 IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL)
#define MX25_PAD_A25__A25 IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A25__GPIO_2_11 IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL)
#define MX25_PAD_EB0__EB0 IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_EB0__AUD4_TXD IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
#define MX25_PAD_EB0__GPIO_2_12 IOMUX_PAD(0x258, 0x040, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_EB1__EB1 IOMUX_PAD(0x25c, 0x044, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_EB1__AUD4_RXD IOMUX_PAD(0x25c, 0x044, 0x14, 0x460, 0, NO_PAD_CTRL)
#define MX25_PAD_EB1__GPIO_2_13 IOMUX_PAD(0x25c, 0x044, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_OE__OE IOMUX_PAD(0x260, 0x048, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_OE__AUD4_TXC IOMUX_PAD(0x260, 0x048, 0x14, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_OE__GPIO_2_14 IOMUX_PAD(0x260, 0x048, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS0__CS0 IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS0__GPIO_4_2 IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS1__CS1 IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS1__NF_CE3 IOMUX_PAD(0x000, 0x050, 0x01, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS1__GPIO_4_3 IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS4__CS4 IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS4__NF_CE1 IOMUX_PAD(0x264, 0x054, 0x01, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS4__UART5_CTS IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS4__GPIO_3_20 IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS5__CS5 IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS5__NF_CE2 IOMUX_PAD(0x268, 0x058, 0x01, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS5__UART5_RTS IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
#define MX25_PAD_CS5__GPIO_3_21 IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_NF_CE0__GPIO_3_22 IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_ECB__ECB IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_ECB__UART5_TXD_MUX IOMUX_PAD(0x270, 0x060, 0x13, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_ECB__GPIO_3_23 IOMUX_PAD(0x270, 0x060, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LBA__LBA IOMUX_PAD(0x274, 0x064, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LBA__UART5_RXD_MUX IOMUX_PAD(0x274, 0x064, 0x13, 0x578, 0, NO_PAD_CTRL)
#define MX25_PAD_LBA__GPIO_3_24 IOMUX_PAD(0x274, 0x064, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_BCLK__BCLK IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_BCLK__GPIO_4_4 IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_RW__RW IOMUX_PAD(0x278, 0x06c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_RW__AUD4_TXFS IOMUX_PAD(0x278, 0x06c, 0x14, 0x474, 0, NO_PAD_CTRL)
#define MX25_PAD_RW__GPIO_3_25 IOMUX_PAD(0x278, 0x06c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_NFWE_B__NFWE_B IOMUX_PAD(0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_NFWE_B__GPIO_3_26 IOMUX_PAD(0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_NFRE_B__NFRE_B IOMUX_PAD(0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_NFRE_B__GPIO_3_27 IOMUX_PAD(0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_NFALE__NFALE IOMUX_PAD(0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_NFALE__GPIO_3_28 IOMUX_PAD(0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_NFCLE__NFCLE IOMUX_PAD(0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_NFCLE__GPIO_3_29 IOMUX_PAD(0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_NFWP_B__NFWP_B IOMUX_PAD(0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_NFWP_B__GPIO_3_30 IOMUX_PAD(0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_NFRB__NFRB IOMUX_PAD(0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PKE)
#define MX25_PAD_NFRB__GPIO_3_31 IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D15__D15 IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D15__LD16 IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_D15__GPIO_4_5 IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D14__D14 IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D14__LD17 IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_D14__GPIO_4_6 IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D13__D13 IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D13__LD18 IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_D13__GPIO_4_7 IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D12__D12 IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D12__GPIO_4_8 IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D11__D11 IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D11__GPIO_4_9 IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D10__D10 IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D10__GPIO_4_10 IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D10__USBOTG_OC IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP)
#define MX25_PAD_D9__D9 IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D9__GPIO_4_11 IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D9__USBH2_PWR IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE)
#define MX25_PAD_D8__D8 IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D8__GPIO_4_12 IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D8__USBH2_OC IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP)
#define MX25_PAD_D7__D7 IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D7__GPIO_4_13 IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D6__D6 IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D6__GPIO_4_14 IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D5__D5 IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D5__GPIO_4_15 IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D4__D4 IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D4__GPIO_4_16 IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D3__D3 IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D3__GPIO_4_17 IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D2__D2 IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D2__GPIO_4_18 IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D1__D1 IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D1__GPIO_4_19 IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D0__D0 IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D0__GPIO_4_20 IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD0__LD0 IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD0__CSI_D0 IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL)
#define MX25_PAD_LD0__GPIO_2_15 IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD1__LD1 IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD1__CSI_D1 IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL)
#define MX25_PAD_LD1__GPIO_2_16 IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD2__LD2 IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD2__GPIO_2_17 IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD3__LD3 IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD3__GPIO_2_18 IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD4__LD4 IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD4__GPIO_2_19 IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD5__LD5 IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD5__GPIO_1_19 IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD6__LD6 IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD6__GPIO_1_20 IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD7__LD7 IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD7__GPIO_1_21 IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL)
#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL)
#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL)
#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL)
#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL)
#define MX25_PAD_HSYNC__HSYNC IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_HSYNC__GPIO_1_22 IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_VSYNC__VSYNC IOMUX_PAD(0x304, 0x10c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_VSYNC__GPIO_1_23 IOMUX_PAD(0x304, 0x10c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LSCLK__LSCLK IOMUX_PAD(0x308, 0x110, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LSCLK__GPIO_1_24 IOMUX_PAD(0x308, 0x110, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_OE_ACD__OE_ACD IOMUX_PAD(0x30c, 0x114, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_OE_ACD__GPIO_1_25 IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CONTRAST__CONTRAST IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CONTRAST__PWM4_PWMO IOMUX_PAD(0x310, 0x118, 0x14, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL)
#define MX25_PAD_PWM__PWM IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_PWM__GPIO_1_26 IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_PWM__USBH2_OC IOMUX_PAD(0x314, 0x11c, 0x16, 0x580, 1, PAD_CTL_PUS_100K_UP)
#define MX25_PAD_CSI_D2__CSI_D2 IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D2__UART5_RXD_MUX IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL)
#define MX25_PAD_CSI_D2__GPIO_1_27 IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D2__CSPI3_MOSI IOMUX_PAD(0x318, 0x120, 0x17, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D3__CSI_D3 IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D3__GPIO_1_28 IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D3__CSPI3_MISO IOMUX_PAD(0x31c, 0x124, 0x17, 0x4b4, 1, NO_PAD_CTRL)
#define MX25_PAD_CSI_D4__CSI_D4 IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D4__UART5_RTS IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL)
#define MX25_PAD_CSI_D4__GPIO_1_29 IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D4__CSPI3_SCLK IOMUX_PAD(0x320, 0x128, 0x17, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D5__CSI_D5 IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D5__GPIO_1_30 IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D5__CSPI3_RDY IOMUX_PAD(0x324, 0x12c, 0x17, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D6__CSI_D6 IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D6__GPIO_1_31 IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D7__CSI_D7 IOMUX_PAD(0x32c, 0x134, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D7__GPIO_1_6 IOMUX_PAD(0x32c, 0x134, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D8__CSI_D8 IOMUX_PAD(0x330, 0x138, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D8__GPIO_1_7 IOMUX_PAD(0x330, 0x138, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D9__CSI_D9 IOMUX_PAD(0x334, 0x13c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_D9__GPIO_4_21 IOMUX_PAD(0x334, 0x13c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_MCLK__CSI_MCLK IOMUX_PAD(0x338, 0x140, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_MCLK__GPIO_1_8 IOMUX_PAD(0x338, 0x140, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_VSYNC__CSI_VSYNC IOMUX_PAD(0x33c, 0x144, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_VSYNC__GPIO_1_9 IOMUX_PAD(0x33c, 0x144, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_HSYNC__CSI_HSYNC IOMUX_PAD(0x340, 0x148, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_HSYNC__GPIO_1_10 IOMUX_PAD(0x340, 0x148, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK IOMUX_PAD(0x344, 0x14c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 IOMUX_PAD(0x344, 0x14c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_I2C1_CLK__I2C1_CLK IOMUX_PAD(0x348, 0x150, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_I2C1_CLK__GPIO_1_12 IOMUX_PAD(0x348, 0x150, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_I2C1_DAT__I2C1_DAT IOMUX_PAD(0x34c, 0x154, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_I2C1_DAT__GPIO_1_13 IOMUX_PAD(0x34c, 0x154, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x350, 0x158, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 IOMUX_PAD(0x350, 0x158, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x354, 0x15c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSPI1_MISO__GPIO_1_15 IOMUX_PAD(0x354, 0x15c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x358, 0x160, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSPI1_SS0__GPIO_1_16 IOMUX_PAD(0x358, 0x160, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x35c, 0x164, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSPI1_SS1__GPIO_1_17 IOMUX_PAD(0x35c, 0x164, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x360, 0x168, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 IOMUX_PAD(0x360, 0x168, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CSPI1_RDY__CSPI1_RDY IOMUX_PAD(0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PKE)
#define MX25_PAD_CSPI1_RDY__GPIO_2_22 IOMUX_PAD(0x364, 0x16c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x368, 0x170, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN)
#define MX25_PAD_UART1_RXD__GPIO_4_22 IOMUX_PAD(0x368, 0x170, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x36c, 0x174, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART1_TXD__GPIO_4_23 IOMUX_PAD(0x36c, 0x174, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x370, 0x178, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
#define MX25_PAD_UART1_RTS__CSI_D0 IOMUX_PAD(0x370, 0x178, 0x11, 0x488, 1, NO_PAD_CTRL)
#define MX25_PAD_UART1_RTS__GPIO_4_24 IOMUX_PAD(0x370, 0x178, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
#define MX25_PAD_UART1_CTS__CSI_D1 IOMUX_PAD(0x374, 0x17c, 0x11, 0x48c, 1, NO_PAD_CTRL)
#define MX25_PAD_UART1_CTS__GPIO_4_25 IOMUX_PAD(0x374, 0x17c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x378, 0x180, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART2_RXD__GPIO_4_26 IOMUX_PAD(0x378, 0x180, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x37c, 0x184, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART2_TXD__GPIO_4_27 IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL)
#define MX25_PAD_UART2_RTS__GPIO_4_28 IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL)
#define MX25_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART2_CTS__GPIO_4_29 IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL)
#define MX25_PAD_SD1_CMD__GPIO_2_23 IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL)
#define MX25_PAD_SD1_CLK__GPIO_2_24 IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
#define MX25_PAD_SD1_DATA0__GPIO_2_25 IOMUX_PAD(0x390, 0x198, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
#define MX25_PAD_SD1_DATA1__AUD7_RXD IOMUX_PAD(0x394, 0x19c, 0x13, 0x478, 0, NO_PAD_CTRL)
#define MX25_PAD_SD1_DATA1__GPIO_2_26 IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL)
#define MX25_PAD_SD1_DATA2__GPIO_2_27 IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL)
#define MX25_PAD_SD1_DATA3__GPIO_2_28 IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
#define KPP_CTL_ROW (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
#define KPP_CTL_COL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
#define MX25_PAD_KPP_ROW0__KPP_ROW0 IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, KPP_CTL_ROW)
#define MX25_PAD_KPP_ROW0__GPIO_2_29 IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_KPP_ROW1__KPP_ROW1 IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, KPP_CTL_ROW)
#define MX25_PAD_KPP_ROW1__GPIO_2_30 IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_KPP_ROW2__KPP_ROW2 IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, KPP_CTL_ROW)
#define MX25_PAD_KPP_ROW2__CSI_D0 IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL)
#define MX25_PAD_KPP_ROW2__GPIO_2_31 IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_KPP_ROW3__KPP_ROW3 IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, KPP_CTL_ROW)
#define MX25_PAD_KPP_ROW3__CSI_LD1 IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL)
#define MX25_PAD_KPP_ROW3__GPIO_3_0 IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_KPP_COL0__KPP_COL0 IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, KPP_CTL_COL)
#define MX25_PAD_KPP_COL0__UART4_RXD_MUX IOMUX_PAD(0x3b0, 0x1b8, 0x11, 0x570, 1, NO_PAD_CTRL)
#define MX25_PAD_KPP_COL0__AUD5_TXD IOMUX_PAD(0x3b0, 0x1b8, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
#define MX25_PAD_KPP_COL0__GPIO_3_1 IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_KPP_COL1__KPP_COL1 IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, KPP_CTL_COL)
#define MX25_PAD_KPP_COL1__UART4_TXD_MUX IOMUX_PAD(0x3b4, 0x1bc, 0x11, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_KPP_COL1__AUD5_RXD IOMUX_PAD(0x3b4, 0x1bc, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
#define MX25_PAD_KPP_COL1__GPIO_3_2 IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_KPP_COL2__KPP_COL2 IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, KPP_CTL_COL)
#define MX25_PAD_KPP_COL2__UART4_RTS IOMUX_PAD(0x3b8, 0x1c0, 0x11, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_KPP_COL2__AUD5_TXC IOMUX_PAD(0x3b8, 0x1c0, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
#define MX25_PAD_KPP_COL2__GPIO_3_3 IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, KPP_CTL_COL)
#define MX25_PAD_KPP_COL3__UART4_CTS IOMUX_PAD(0x3bc, 0x1c4, 0x11, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_KPP_COL3__AUD5_TXFS IOMUX_PAD(0x3bc, 0x1c4, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
#define MX25_PAD_KPP_COL3__GPIO_3_4 IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_MDC__AUD4_TXD IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
#define MX25_PAD_FEC_MDC__GPIO_3_5 IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP)
#define MX25_PAD_FEC_MDIO__AUD4_RXD IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
#define MX25_PAD_FEC_MDIO__GPIO_3_6 IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_TDATA0__GPIO_3_7 IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_TDATA1__AUD4_TXFS IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
#define MX25_PAD_FEC_TDATA1__GPIO_3_8 IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_TX_EN__GPIO_3_9 IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
#define MX25_PAD_FEC_RDATA0__GPIO_3_10 IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
#define MX25_PAD_FEC_RDATA1__GPIO_3_11 IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
#define MX25_PAD_FEC_RX_DV__CAN2_RX IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
#define MX25_PAD_FEC_RX_DV__GPIO_3_12 IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN)
#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 IOMUX_PAD(0x3e0, 0x1e8, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_RTCK__RTCK IOMUX_PAD(0x3e4, 0x1ec, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_RTCK__OWIRE IOMUX_PAD(0x3e4, 0x1ec, 0x11, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_RTCK__GPIO_3_14 IOMUX_PAD(0x3e4, 0x1ec, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_DE_B__DE_B IOMUX_PAD(0x3ec, 0x1f0, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_DE_B__GPIO_2_20 IOMUX_PAD(0x3ec, 0x1f0, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_TDO__TDO IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_A__GPIO_A IOMUX_PAD(0x3f0, 0x1f4, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_A__CAN1_TX IOMUX_PAD(0x3f0, 0x1f4, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
#define MX25_PAD_GPIO_A__USBOTG_PWR IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE)
#define MX25_PAD_GPIO_B__GPIO_B IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_B__CAN1_RX IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K_UP)
#define MX25_PAD_GPIO_B__USBOTG_OC IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP)
#define MX25_PAD_GPIO_C__GPIO_C IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_C__CAN2_TX IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
#define MX25_PAD_GPIO_D__GPIO_D IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_GPIO_D__CAN2_RX IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
#define MX25_PAD_GPIO_E__GPIO_E IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_GPIO_E__AUD7_TXD IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_F__GPIO_F IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_F__AUD7_TXC IOMUX_PAD(0x404, 0x208, 0x14, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK IOMUX_PAD(0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 IOMUX_PAD(0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK IOMUX_PAD(0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 IOMUX_PAD(0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_VSTBY_REQ__VSTBY_REQ IOMUX_PAD(0x408, 0x214, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_VSTBY_REQ__AUD7_TXFS IOMUX_PAD(0x408, 0x214, 0x14, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_VSTBY_REQ__GPIO_3_17 IOMUX_PAD(0x408, 0x214, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_VSTBY_ACK__VSTBY_ACK IOMUX_PAD(0x40c, 0x218, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_VSTBY_ACK__GPIO_3_18 IOMUX_PAD(0x40c, 0x218, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_POWER_FAIL__POWER_FAIL IOMUX_PAD(0x410, 0x21c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_POWER_FAIL__AUD7_RXD IOMUX_PAD(0x410, 0x21c, 0x14, 0x478, 1, NO_PAD_CTRL)
#define MX25_PAD_POWER_FAIL__GPIO_3_19 IOMUX_PAD(0x410, 0x21c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CLKO__CLKO IOMUX_PAD(0x414, 0x220, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CLKO__GPIO_2_21 IOMUX_PAD(0x414, 0x220, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_BOOT_MODE0__GPIO_4_30 IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_BOOT_MODE1__GPIO_4_31 IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DVS_MISC IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DSE_FEC IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DVS_JTAG IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DSE_NFC IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DSE_CSI IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DSE_WEIM IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DSE_DDR IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DVS_CRM IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DSE_KPP IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DSE_SDHC1 IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DSE_LCD IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DSE_UART IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DVS_NFC IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DVS_CSI IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DSE_CSPI1 IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DDRTYPE IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DVS_SDHC1 IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DVS_LCD IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
#endif /* __MACH_IOMUX_MX25_H__ */

2
arch/arm/mach-imx/iomux-mx3.h
View File

@ -114,7 +114,7 @@ enum iomux_gp_func {
*/
int mxc_iomux_alloc_pin(unsigned int pin, const char *label);
/*
* setups mutliple pins
* setups multiple pins
* convenient way to call the above function with tables
*/
int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,

5
arch/arm/mach-imx/iomux-v3.c
View File

@ -56,9 +56,10 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
return 0;
}
int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count)
int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
unsigned count)
{
iomux_v3_cfg_t *p = pad_list;
const iomux_v3_cfg_t *p = pad_list;
int i;
int ret;

5
arch/arm/mach-imx/iomux-v3.h
View File

@ -128,10 +128,11 @@ typedef u64 iomux_v3_cfg_t;
int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
/*
* setups mutliple pads
* setups multiple pads
* convenient way to call the above function with tables
*/
int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count);
int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
unsigned count);
/*
* Initialise the iomux controller

2
arch/arm/mach-imx/mach-cpuimx35.c
View File

@ -75,7 +75,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
},
};
static iomux_v3_cfg_t eukrea_cpuimx35_pads[] = {
static const iomux_v3_cfg_t eukrea_cpuimx35_pads[] __initconst = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,

172
arch/arm/mach-imx/mach-eukrea_cpuimx25.c
View File

@ -1,172 +0,0 @@
/*
* Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
* Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
#include "common.h"
#include "devices-imx25.h"
#include "ehci.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx25.h"
#include "mx25.h"
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static iomux_v3_cfg_t eukrea_cpuimx25_pads[] = {
/* FEC - RMII */
MX25_PAD_FEC_MDC__FEC_MDC,
MX25_PAD_FEC_MDIO__FEC_MDIO,
MX25_PAD_FEC_TDATA0__FEC_TDATA0,
MX25_PAD_FEC_TDATA1__FEC_TDATA1,
MX25_PAD_FEC_TX_EN__FEC_TX_EN,
MX25_PAD_FEC_RDATA0__FEC_RDATA0,
MX25_PAD_FEC_RDATA1__FEC_RDATA1,
MX25_PAD_FEC_RX_DV__FEC_RX_DV,
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
/* I2C1 */
MX25_PAD_I2C1_CLK__I2C1_CLK,
MX25_PAD_I2C1_DAT__I2C1_DAT,
};
static const struct fec_platform_data mx25_fec_pdata __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
static const struct mxc_nand_platform_data
eukrea_cpuimx25_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
.flash_bbt = 1,
};
static const struct imxi2c_platform_data
eukrea_cpuimx25_i2c0_data __initconst = {
.bitrate = 100000,
};
static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
{
I2C_BOARD_INFO("pcf8563", 0x51),
},
};
static int eukrea_cpuimx25_otg_init(struct platform_device *pdev)
{
return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static const struct mxc_usbh_platform_data otg_pdata __initconst = {
.init = eukrea_cpuimx25_otg_init,
.portsc = MXC_EHCI_MODE_UTMI,
};
static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev)
{
return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
}
static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
.init = eukrea_cpuimx25_usbh2_init,
.portsc = MXC_EHCI_MODE_SERIAL,
};
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI,
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
};
static bool otg_mode_host __initdata;
static int __init eukrea_cpuimx25_otg_mode(char *options)
{
if (!strcmp(options, "host"))
otg_mode_host = true;
else if (!strcmp(options, "device"))
otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
return 1;
}
__setup("otg_mode=", eukrea_cpuimx25_otg_mode);
static void __init eukrea_cpuimx25_init(void)
{
imx25_soc_init();
if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
ARRAY_SIZE(eukrea_cpuimx25_pads)))
printk(KERN_ERR "error setting cpuimx25 pads !\n");
imx25_add_imx_uart0(&uart_pdata);
imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
imx25_add_imxdi_rtc();
imx25_add_fec(&mx25_fec_pdata);
imx25_add_imx2_wdt();
i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
if (otg_mode_host)
imx25_add_mxc_ehci_otg(&otg_pdata);
else
imx25_add_fsl_usb2_udc(&otg_device_pdata);
imx25_add_mxc_ehci_hs(&usbh2_pdata);
#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
eukrea_mbimxsd25_baseboard_init();
#endif
}
static void __init eukrea_cpuimx25_timer_init(void)
{
mx25_clocks_init();
}
MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
/* Maintainer: Eukrea Electromatique */
.atag_offset = 0x100,
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
.init_time = eukrea_cpuimx25_timer_init,
.init_machine = eukrea_cpuimx25_init,
.restart = mxc_restart,
MACHINE_END

20
arch/arm/mach-imx/imx25-dt.c → arch/arm/mach-imx/mach-imx25.c
View File

@ -10,12 +10,29 @@
*/
#include <linux/irq.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "common.h"
#include "mx25.h"
#include "hardware.h"
static void __init imx25_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX25);
}
static void __init mx25_init_irq(void)
{
struct device_node *np;
void __iomem *avic_base;
np = of_find_compatible_node(NULL, NULL, "fsl,avic");
avic_base = of_iomap(np, 0);
BUG_ON(!avic_base);
mxc_init_irq(avic_base);
}
static const char * const imx25_dt_board_compat[] __initconst = {
"fsl,imx25",
@ -23,7 +40,6 @@ static const char * const imx25_dt_board_compat[] __initconst = {
};
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
.dt_compat = imx25_dt_board_compat,

270
arch/arm/mach-imx/mach-mx25_3ds.c
View File

@ -1,270 +0,0 @@
/*
* Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
/*
* This machine is known as:
* - i.MX25 3-Stack Development System
* - i.MX25 Platform Development Kit (i.MX25 PDK)
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/usb/otg.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
#include "common.h"
#include "devices-imx25.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx25.h"
#include "mx25.h"
#define MX25PDK_CAN_PWDN IMX_GPIO_NR(4, 6)
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static iomux_v3_cfg_t mx25pdk_pads[] = {
MX25_PAD_FEC_MDC__FEC_MDC,
MX25_PAD_FEC_MDIO__FEC_MDIO,
MX25_PAD_FEC_TDATA0__FEC_TDATA0,
MX25_PAD_FEC_TDATA1__FEC_TDATA1,
MX25_PAD_FEC_TX_EN__FEC_TX_EN,
MX25_PAD_FEC_RDATA0__FEC_RDATA0,
MX25_PAD_FEC_RDATA1__FEC_RDATA1,
MX25_PAD_FEC_RX_DV__FEC_RX_DV,
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
/* LCD */
MX25_PAD_LD0__LD0,
MX25_PAD_LD1__LD1,
MX25_PAD_LD2__LD2,
MX25_PAD_LD3__LD3,
MX25_PAD_LD4__LD4,
MX25_PAD_LD5__LD5,
MX25_PAD_LD6__LD6,
MX25_PAD_LD7__LD7,
MX25_PAD_LD8__LD8,
MX25_PAD_LD9__LD9,
MX25_PAD_LD10__LD10,
MX25_PAD_LD11__LD11,
MX25_PAD_LD12__LD12,
MX25_PAD_LD13__LD13,
MX25_PAD_LD14__LD14,
MX25_PAD_LD15__LD15,
MX25_PAD_GPIO_E__LD16,
MX25_PAD_GPIO_F__LD17,
MX25_PAD_HSYNC__HSYNC,
MX25_PAD_VSYNC__VSYNC,
MX25_PAD_LSCLK__LSCLK,
MX25_PAD_OE_ACD__OE_ACD,
MX25_PAD_CONTRAST__CONTRAST,
/* Keypad */
MX25_PAD_KPP_ROW0__KPP_ROW0,
MX25_PAD_KPP_ROW1__KPP_ROW1,
MX25_PAD_KPP_ROW2__KPP_ROW2,
MX25_PAD_KPP_ROW3__KPP_ROW3,
MX25_PAD_KPP_COL0__KPP_COL0,
MX25_PAD_KPP_COL1__KPP_COL1,
MX25_PAD_KPP_COL2__KPP_COL2,
MX25_PAD_KPP_COL3__KPP_COL3,
/* SD1 */
MX25_PAD_SD1_CMD__SD1_CMD,
MX25_PAD_SD1_CLK__SD1_CLK,
MX25_PAD_SD1_DATA0__SD1_DATA0,
MX25_PAD_SD1_DATA1__SD1_DATA1,
MX25_PAD_SD1_DATA2__SD1_DATA2,
MX25_PAD_SD1_DATA3__SD1_DATA3,
MX25_PAD_A14__GPIO_2_0, /* WriteProtect */
MX25_PAD_A15__GPIO_2_1, /* CardDetect */
/* I2C1 */
MX25_PAD_I2C1_CLK__I2C1_CLK,
MX25_PAD_I2C1_DAT__I2C1_DAT,
/* CAN1 */
MX25_PAD_GPIO_A__CAN1_TX,
MX25_PAD_GPIO_B__CAN1_RX,
MX25_PAD_D14__GPIO_4_6, /* CAN_PWDN */
};
static const struct fec_platform_data mx25_fec_pdata __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
#define FEC_ENABLE_GPIO IMX_GPIO_NR(2, 3)
#define FEC_RESET_B_GPIO IMX_GPIO_NR(4, 8)
static void __init mx25pdk_fec_reset(void)
{
gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
gpio_direction_output(FEC_ENABLE_GPIO, 0); /* drop PHY power */
gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
udelay(2);
/* turn on PHY power and lift reset */
gpio_set_value(FEC_ENABLE_GPIO, 1);
gpio_set_value(FEC_RESET_B_GPIO, 1);
}
static const struct mxc_nand_platform_data
mx25pdk_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
.flash_bbt = 1,
};
static struct imx_fb_videomode mx25pdk_modes[] = {
{
.mode = {
.name = "CRT-VGA",
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 39683,
.left_margin = 45,
.right_margin = 114,
.upper_margin = 33,
.lower_margin = 11,
.hsync_len = 1,
.vsync_len = 1,
},
.bpp = 16,
.pcr = 0xFA208B80,
},
};
static const struct imx_fb_platform_data mx25pdk_fb_pdata __initconst = {
.mode = mx25pdk_modes,
.num_modes = ARRAY_SIZE(mx25pdk_modes),
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
};
static const uint32_t mx25pdk_keymap[] = {
KEY(0, 0, KEY_UP),
KEY(0, 1, KEY_DOWN),
KEY(0, 2, KEY_VOLUMEDOWN),
KEY(0, 3, KEY_HOME),
KEY(1, 0, KEY_RIGHT),
KEY(1, 1, KEY_LEFT),
KEY(1, 2, KEY_ENTER),
KEY(1, 3, KEY_VOLUMEUP),
KEY(2, 0, KEY_F6),
KEY(2, 1, KEY_F8),
KEY(2, 2, KEY_F9),
KEY(2, 3, KEY_F10),
KEY(3, 0, KEY_F1),
KEY(3, 1, KEY_F2),
KEY(3, 2, KEY_F3),
KEY(3, 3, KEY_POWER),
};
static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = {
.keymap = mx25pdk_keymap,
.keymap_size = ARRAY_SIZE(mx25pdk_keymap),
};
static int mx25pdk_usbh2_init(struct platform_device *pdev)
{
return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
}
static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
.init = mx25pdk_usbh2_init,
.portsc = MXC_EHCI_MODE_SERIAL,
};
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI,
};
static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = {
.bitrate = 100000,
};
#define SD1_GPIO_WP IMX_GPIO_NR(2, 0)
#define SD1_GPIO_CD IMX_GPIO_NR(2, 1)
static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
.wp_gpio = SD1_GPIO_WP,
.cd_gpio = SD1_GPIO_CD,
.wp_type = ESDHC_WP_GPIO,
.cd_type = ESDHC_CD_GPIO,
};
static void __init mx25pdk_init(void)
{
imx25_soc_init();
mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
ARRAY_SIZE(mx25pdk_pads));
imx25_add_imx_uart0(&uart_pdata);
imx25_add_fsl_usb2_udc(&otg_device_pdata);
imx25_add_mxc_ehci_hs(&usbh2_pdata);
imx25_add_mxc_nand(&mx25pdk_nand_board_info);
imx25_add_imxdi_rtc();
imx25_add_imx_fb(&mx25pdk_fb_pdata);
imx25_add_imx2_wdt();
mx25pdk_fec_reset();
imx25_add_fec(&mx25_fec_pdata);
imx25_add_imx_keypad(&mx25pdk_keymap_data);
imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
gpio_request_one(MX25PDK_CAN_PWDN, GPIOF_OUT_INIT_LOW, "can-pwdn");
imx25_add_flexcan0();
}
static void __init mx25pdk_timer_init(void)
{
mx25_clocks_init();
}
MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
.atag_offset = 0x100,
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
.init_time = mx25pdk_timer_init,
.init_machine = mx25pdk_init,
.restart = mxc_restart,
MACHINE_END

2
arch/arm/mach-imx/mach-mx35_3ds.c
View File

@ -166,7 +166,7 @@ static struct platform_device *devices[] __initdata = {
&mx35pdk_flash,
};
static iomux_v3_cfg_t mx35pdk_pads[] = {
static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,

2
arch/arm/mach-imx/mach-pcm043.c
View File

@ -129,7 +129,7 @@ static struct platform_device *devices[] __initdata = {
&pcm043_flash,
};
static iomux_v3_cfg_t pcm043_pads[] = {
static const iomux_v3_cfg_t pcm043_pads[] __initconst = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,

2
arch/arm/mach-imx/mach-vpr200.c
View File

@ -161,7 +161,7 @@ static struct i2c_board_info vpr200_i2c_devices[] = {
}
};
static iomux_v3_cfg_t vpr200_pads[] = {
static const iomux_v3_cfg_t vpr200_pads[] __initconst = {
/* UART1 */
MX35_PAD_TXD1__UART1_TXD_MUX,
MX35_PAD_RXD1__UART1_RXD_MUX,

89
arch/arm/mach-imx/mm-imx25.c
View File

@ -1,89 +0,0 @@
/*
* Copyright (C) 1999,2000 Arm Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
* Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* - add MX31 specific definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/pinctrl/machine.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include "common.h"
#include "devices/devices-common.h"
#include "hardware.h"
#include "iomux-v3.h"
#include "mx25.h"
/*
* This table defines static virtual address mappings for I/O regions.
* These are the mappings common across all MX25 boards.
*/
static struct map_desc mx25_io_desc[] __initdata = {
imx_map_entry(MX25, AVIC, MT_DEVICE_NONSHARED),
imx_map_entry(MX25, AIPS1, MT_DEVICE_NONSHARED),
imx_map_entry(MX25, AIPS2, MT_DEVICE_NONSHARED),
};
/*
* This function initializes the memory map. It is called during the
* system startup to create static physical to virtual memory mappings
* for the IO modules.
*/
void __init mx25_map_io(void)
{
iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc));
}
void __init imx25_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX25);
mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
}
void __init mx25_init_irq(void)
{
mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
}
static struct sdma_platform_data imx25_sdma_pdata __initdata = {
.fw_name = "sdma-imx25.bin",
};
static const struct resource imx25_audmux_res[] __initconst = {
DEFINE_RES_MEM(MX25_AUDMUX_BASE_ADDR, SZ_16K),
};
void __init imx25_soc_init(void)
{
mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
mxc_device_init();
/* i.mx25 has the i.mx35 type gpio */
mxc_register_gpio("imx35-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
mxc_register_gpio("imx35-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
mxc_register_gpio("imx35-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
mxc_register_gpio("imx35-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
pinctrl_provide_dummies();
/* i.mx25 has the i.mx35 type sdma */
imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata);
/* i.mx25 has the i.mx31 type audmux */
platform_device_register_simple("imx31-audmux", 0, imx25_audmux_res,
ARRAY_SIZE(imx25_audmux_res));
}

117
arch/arm/mach-imx/mx25.h
View File

@ -1,117 +0,0 @@
#ifndef __MACH_MX25_H__
#define __MACH_MX25_H__
#define MX25_AIPS1_BASE_ADDR 0x43f00000
#define MX25_AIPS1_SIZE SZ_1M
#define MX25_AIPS2_BASE_ADDR 0x53f00000
#define MX25_AIPS2_SIZE SZ_1M
#define MX25_AVIC_BASE_ADDR 0x68000000
#define MX25_AVIC_SIZE SZ_1M
#define MX25_I2C1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x80000)
#define MX25_I2C3_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x84000)
#define MX25_CAN1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x88000)
#define MX25_CAN2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x8c000)
#define MX25_I2C2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x98000)
#define MX25_CSPI1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xa4000)
#define MX25_IOMUXC_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xac000)
#define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000)
#define MX25_GPT1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x90000)
#define MX25_GPIO4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x9c000)
#define MX25_PWM2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa0000)
#define MX25_GPIO3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa4000)
#define MX25_PWM3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa8000)
#define MX25_PWM4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xc8000)
#define MX25_GPIO1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xcc000)
#define MX25_GPIO2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xd0000)
#define MX25_WDOG_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xdc000)
#define MX25_PWM1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xe0000)
#define MX25_UART1_BASE_ADDR 0x43f90000
#define MX25_UART2_BASE_ADDR 0x43f94000
#define MX25_AUDMUX_BASE_ADDR 0x43fb0000
#define MX25_UART3_BASE_ADDR 0x5000c000
#define MX25_UART4_BASE_ADDR 0x50008000
#define MX25_UART5_BASE_ADDR 0x5002c000
#define MX25_CSPI3_BASE_ADDR 0x50004000
#define MX25_CSPI2_BASE_ADDR 0x50010000
#define MX25_FEC_BASE_ADDR 0x50038000
#define MX25_SSI2_BASE_ADDR 0x50014000
#define MX25_SSI1_BASE_ADDR 0x50034000
#define MX25_NFC_BASE_ADDR 0xbb000000
#define MX25_IIM_BASE_ADDR 0x53ff0000
#define MX25_DRYICE_BASE_ADDR 0x53ffc000
#define MX25_ESDHC1_BASE_ADDR 0x53fb4000
#define MX25_ESDHC2_BASE_ADDR 0x53fb8000
#define MX25_LCDC_BASE_ADDR 0x53fbc000
#define MX25_KPP_BASE_ADDR 0x43fa8000
#define MX25_SDMA_BASE_ADDR 0x53fd4000
#define MX25_USB_BASE_ADDR 0x53ff4000
#define MX25_USB_OTG_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0000)
/*
* The reference manual (IMX25RM, Rev. 1, 06/2009) specifies an offset of 0x200
* for the host controller. Early documentation drafts specified 0x400 and
* Freescale internal sources confirm only the latter value to work.
*/
#define MX25_USB_HS_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0400)
#define MX25_CSI_BASE_ADDR 0x53ff8000
#define MX25_IO_P2V(x) IMX_IO_P2V(x)
#define MX25_IO_ADDRESS(x) IOMEM(MX25_IO_P2V(x))
/*
* Interrupt numbers
*/
#include <asm/irq.h>
#define MX25_INT_CSPI3 (NR_IRQS_LEGACY + 0)
#define MX25_INT_I2C1 (NR_IRQS_LEGACY + 3)
#define MX25_INT_I2C2 (NR_IRQS_LEGACY + 4)
#define MX25_INT_UART4 (NR_IRQS_LEGACY + 5)
#define MX25_INT_ESDHC2 (NR_IRQS_LEGACY + 8)
#define MX25_INT_ESDHC1 (NR_IRQS_LEGACY + 9)
#define MX25_INT_I2C3 (NR_IRQS_LEGACY + 10)
#define MX25_INT_SSI2 (NR_IRQS_LEGACY + 11)
#define MX25_INT_SSI1 (NR_IRQS_LEGACY + 12)
#define MX25_INT_CSPI2 (NR_IRQS_LEGACY + 13)
#define MX25_INT_CSPI1 (NR_IRQS_LEGACY + 14)
#define MX25_INT_GPIO3 (NR_IRQS_LEGACY + 16)
#define MX25_INT_CSI (NR_IRQS_LEGACY + 17)
#define MX25_INT_UART3 (NR_IRQS_LEGACY + 18)
#define MX25_INT_GPIO4 (NR_IRQS_LEGACY + 23)
#define MX25_INT_KPP (NR_IRQS_LEGACY + 24)
#define MX25_INT_DRYICE (NR_IRQS_LEGACY + 25)
#define MX25_INT_PWM1 (NR_IRQS_LEGACY + 26)
#define MX25_INT_UART2 (NR_IRQS_LEGACY + 32)
#define MX25_INT_NFC (NR_IRQS_LEGACY + 33)
#define MX25_INT_SDMA (NR_IRQS_LEGACY + 34)
#define MX25_INT_USB_HS (NR_IRQS_LEGACY + 35)
#define MX25_INT_PWM2 (NR_IRQS_LEGACY + 36)
#define MX25_INT_USB_OTG (NR_IRQS_LEGACY + 37)
#define MX25_INT_LCDC (NR_IRQS_LEGACY + 39)
#define MX25_INT_UART5 (NR_IRQS_LEGACY + 40)
#define MX25_INT_PWM3 (NR_IRQS_LEGACY + 41)
#define MX25_INT_PWM4 (NR_IRQS_LEGACY + 42)
#define MX25_INT_CAN1 (NR_IRQS_LEGACY + 43)
#define MX25_INT_CAN2 (NR_IRQS_LEGACY + 44)
#define MX25_INT_UART1 (NR_IRQS_LEGACY + 45)
#define MX25_INT_GPIO2 (NR_IRQS_LEGACY + 51)
#define MX25_INT_GPIO1 (NR_IRQS_LEGACY + 52)
#define MX25_INT_GPT1 (NR_IRQS_LEGACY + 54)
#define MX25_INT_FEC (NR_IRQS_LEGACY + 57)
#define MX25_DMA_REQ_SSI2_RX1 22
#define MX25_DMA_REQ_SSI2_TX1 23
#define MX25_DMA_REQ_SSI2_RX0 24
#define MX25_DMA_REQ_SSI2_TX0 25
#define MX25_DMA_REQ_SSI1_RX1 26
#define MX25_DMA_REQ_SSI1_TX1 27
#define MX25_DMA_REQ_SSI1_RX0 28
#define MX25_DMA_REQ_SSI1_TX0 29
#ifndef __ASSEMBLY__
extern int mx25_revision(void);
#endif
#endif /* ifndef __MACH_MX25_H__ */

109
arch/arm/mach-msm/Kconfig
View File

@ -1,109 +0,0 @@
if ARCH_MSM
choice
prompt "Qualcomm MSM SoC Type"
default ARCH_MSM7X00A
depends on ARCH_MSM
config ARCH_MSM7X00A
bool "MSM7x00A / MSM7x01A"
select ARCH_MSM_ARM11
select CPU_V6
select GPIO_MSM_V1
select MACH_TROUT if !MACH_HALIBUT
select MSM_PROC_COMM
select MSM_SMD
select CLKSRC_QCOM
select MSM_SMD_PKG3
config ARCH_MSM7X30
bool "MSM7x30"
select ARCH_MSM_SCORPION
select CPU_V7
select GPIO_MSM_V1
select MACH_MSM7X30_SURF # if !
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
select CLKSRC_QCOM
select MSM_VIC
config ARCH_QSD8X50
bool "QSD8X50"
select ARCH_MSM_SCORPION
select CPU_V7
select GPIO_MSM_V1
select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
select CLKSRC_QCOM
select MSM_VIC
endchoice
config MSM_SOC_REV_A
bool
config ARCH_MSM_ARM11
bool
config ARCH_MSM_SCORPION
bool
config MSM_VIC
bool
menu "Qualcomm MSM Board Type"
depends on ARCH_MSM
config MACH_HALIBUT
depends on ARCH_MSM
depends on ARCH_MSM7X00A
bool "Halibut Board (QCT SURF7201A)"
help
Support for the Qualcomm SURF7201A eval board.
config MACH_TROUT
depends on ARCH_MSM
depends on ARCH_MSM7X00A
bool "HTC Dream (aka trout)"
help
Support for the HTC Dream, T-Mobile G1, Android ADP1 devices.
config MACH_MSM7X30_SURF
depends on ARCH_MSM7X30
bool "MSM7x30 SURF"
help
Support for the Qualcomm MSM7x30 SURF eval board.
config MACH_QSD8X50_SURF
depends on ARCH_QSD8X50
bool "QSD8x50 SURF"
help
Support for the Qualcomm QSD8x50 SURF eval board.
config MACH_QSD8X50A_ST1_5
depends on ARCH_QSD8X50
bool "QSD8x50A ST1.5"
select MSM_SOC_REV_A
help
Support for the Qualcomm ST1.5.
endmenu
config MSM_SMD_PKG3
bool
config MSM_PROC_COMM
bool
config MSM_SMD
bool
config MSM_GPIOMUX
bool
help
Support for MSM V1 TLMM GPIOMUX architecture.
endif

23
arch/arm/mach-msm/Makefile
View File

@ -1,23 +0,0 @@
obj-$(CONFIG_MSM_PROC_COMM) += clock.o
obj-$(CONFIG_MSM_VIC) += irq-vic.o
obj-$(CONFIG_ARCH_MSM7X00A) += irq.o
obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o
obj-$(CONFIG_ARCH_MSM7X00A) += dma.o io.o
obj-$(CONFIG_ARCH_MSM7X30) += dma.o io.o
obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o
obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o

3
arch/arm/mach-msm/Makefile.boot
View File

@ -1,3 +0,0 @@
zreladdr-y += 0x10008000
params_phys-y := 0x10000100
initrd_phys-y := 0x10800000

110
arch/arm/mach-msm/board-halibut.c
View File

@ -1,110 +0,0 @@
/* linux/arch/arm/mach-msm/board-halibut.c
*
* Copyright (C) 2007 Google, Inc.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/setup.h>
#include <mach/irqs.h>
#include <mach/msm_iomap.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include "devices.h"
#include "common.h"
static struct resource smc91x_resources[] = {
[0] = {
.start = 0x9C004300,
.end = 0x9C004400,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = MSM_GPIO_TO_INT(49),
.end = MSM_GPIO_TO_INT(49),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct smc91x_platdata smc91x_platdata = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
.dev.platform_data = &smc91x_platdata,
};
static struct platform_device *devices[] __initdata = {
&msm_clock_7x01a,
&msm_device_gpio_7201,
&msm_device_uart3,
&msm_device_smd,
&msm_device_nand,
&msm_device_hsusb,
&msm_device_i2c,
&smc91x_device,
};
static void __init halibut_init_early(void)
{
arch_ioremap_caller = __msm_ioremap_caller;
}
static void __init halibut_init_irq(void)
{
msm_init_irq();
}
static void __init halibut_init(void)
{
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init halibut_map_io(void)
{
msm_map_common_io();
}
static void __init halibut_init_late(void)
{
smd_debugfs_init();
}
MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
.atag_offset = 0x100,
.map_io = halibut_map_io,
.init_early = halibut_init_early,
.init_irq = halibut_init_irq,
.init_machine = halibut_init,
.init_late = halibut_init_late,
.init_time = msm7x01_timer_init,
MACHINE_END

191
arch/arm/mach-msm/board-msm7x30.c
View File

@ -1,191 +0,0 @@
/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/usb/msm_hsusb.h>
#include <linux/clkdev.h>
#include <linux/memblock.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/memory.h>
#include <asm/setup.h>
#include <mach/clk.h>
#include <mach/msm_iomap.h>
#include <mach/dma.h>
#include <mach/vreg.h>
#include "devices.h"
#include "gpiomux.h"
#include "proc_comm.h"
#include "common.h"
static void __init msm7x30_fixup(struct tag *tag, char **cmdline)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
tag->u.mem.start = 0;
tag->u.mem.size += SZ_2M;
}
}
static void __init msm7x30_reserve(void)
{
memblock_remove(0x0, SZ_2M);
}
static int hsusb_phy_init_seq[] = {
0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */
0x02, 0x36, /* Disable CDR Auto Reset feature */
-1
};
static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
{
int ret;
if (assert) {
ret = clk_reset(link_clk, CLK_RESET_ASSERT);
if (ret)
pr_err("usb hs_clk assert failed\n");
} else {
ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
if (ret)
pr_err("usb hs_clk deassert failed\n");
}
return ret;
}
static int hsusb_phy_clk_reset(struct clk *phy_clk)
{
int ret;
ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
if (ret) {
pr_err("usb phy clk assert failed\n");
return ret;
}
usleep_range(10000, 12000);
ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
if (ret)
pr_err("usb phy clk deassert failed\n");
return ret;
}
static struct msm_otg_platform_data msm_otg_pdata = {
.phy_init_seq = hsusb_phy_init_seq,
.mode = USB_DR_MODE_PERIPHERAL,
.otg_control = OTG_PHY_CONTROL,
.link_clk_reset = hsusb_link_clk_reset,
.phy_clk_reset = hsusb_phy_clk_reset,
};
struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
#ifdef CONFIG_SERIAL_MSM_CONSOLE
[49] = { /* UART2 RFR */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_2 | GPIOMUX_VALID,
},
[50] = { /* UART2 CTS */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_2 | GPIOMUX_VALID,
},
[51] = { /* UART2 RX */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_2 | GPIOMUX_VALID,
},
[52] = { /* UART2 TX */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_2 | GPIOMUX_VALID,
},
#endif
};
static struct platform_device *devices[] __initdata = {
&msm_clock_7x30,
&msm_device_gpio_7x30,
#if defined(CONFIG_SERIAL_MSM)
&msm_device_uart2,
#endif
&msm_device_smd,
&msm_device_otg,
&msm_device_hsusb,
&msm_device_hsusb_host,
};
static void __init msm7x30_init_irq(void)
{
msm_init_irq();
}
static void __init msm7x30_init(void)
{
msm_device_otg.dev.platform_data = &msm_otg_pdata;
msm_device_hsusb.dev.parent = &msm_device_otg.dev;
msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init msm7x30_map_io(void)
{
msm_map_msm7x30_io();
}
static void __init msm7x30_init_late(void)
{
smd_debugfs_init();
}
MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
.atag_offset = 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
.init_late = msm7x30_init_late,
.init_time = msm7x30_timer_init,
MACHINE_END
MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
.atag_offset = 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
.init_late = msm7x30_init_late,
.init_time = msm7x30_timer_init,
MACHINE_END
MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
.atag_offset = 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
.init_late = msm7x30_init_late,
.init_time = msm7x30_timer_init,
MACHINE_END

254
arch/arm/mach-msm/board-qsd8x50.c
View File

@ -1,254 +0,0 @@
/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/usb/msm_hsusb.h>
#include <linux/err.h>
#include <linux/clkdev.h>
#include <linux/smc91x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/io.h>
#include <asm/setup.h>
#include <mach/irqs.h>
#include <mach/sirc.h>
#include <mach/vreg.h>
#include <mach/clk.h>
#include <linux/platform_data/mmc-msm_sdcc.h>
#include "devices.h"
#include "common.h"
static const resource_size_t qsd8x50_surf_smc91x_base __initconst = 0x70000300;
static const unsigned qsd8x50_surf_smc91x_gpio __initconst = 156;
/* Leave smc91x resources empty here, as we'll fill them in
* at run-time: they vary from board to board, and the true
* configuration won't be known until boot.
*/
static struct resource smc91x_resources[] = {
[0] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct smc91x_platdata smc91x_platdata = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
.dev.platform_data = &smc91x_platdata,
};
static int __init msm_init_smc91x(void)
{
if (machine_is_qsd8x50_surf()) {
smc91x_resources[0].start = qsd8x50_surf_smc91x_base;
smc91x_resources[0].end = qsd8x50_surf_smc91x_base + 0xff;
smc91x_resources[1].start =
gpio_to_irq(qsd8x50_surf_smc91x_gpio);
smc91x_resources[1].end =
gpio_to_irq(qsd8x50_surf_smc91x_gpio);
platform_device_register(&smc91x_device);
}
return 0;
}
module_init(msm_init_smc91x);
static int hsusb_phy_init_seq[] = {
0x08, 0x31, /* Increase HS Driver Amplitude */
0x20, 0x32, /* Enable and set Pre-Emphasis Depth to 10% */
-1
};
static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
{
int ret;
if (assert) {
ret = clk_reset(link_clk, CLK_RESET_ASSERT);
if (ret)
pr_err("usb hs_clk assert failed\n");
} else {
ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
if (ret)
pr_err("usb hs_clk deassert failed\n");
}
return ret;
}
static int hsusb_phy_clk_reset(struct clk *phy_clk)
{
int ret;
ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
if (ret) {
pr_err("usb phy clk assert failed\n");
return ret;
}
usleep_range(10000, 12000);
ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
if (ret)
pr_err("usb phy clk deassert failed\n");
return ret;
}
static struct msm_otg_platform_data msm_otg_pdata = {
.phy_init_seq = hsusb_phy_init_seq,
.mode = USB_DR_MODE_PERIPHERAL,
.otg_control = OTG_PHY_CONTROL,
.link_clk_reset = hsusb_link_clk_reset,
.phy_clk_reset = hsusb_phy_clk_reset,
};
static struct platform_device *devices[] __initdata = {
&msm_clock_8x50,
&msm_device_gpio_8x50,
&msm_device_uart3,
&msm_device_smd,
&msm_device_otg,
&msm_device_hsusb,
&msm_device_hsusb_host,
};
static struct msm_mmc_gpio sdc1_gpio_cfg[] = {
{51, "sdc1_dat_3"},
{52, "sdc1_dat_2"},
{53, "sdc1_dat_1"},
{54, "sdc1_dat_0"},
{55, "sdc1_cmd"},
{56, "sdc1_clk"}
};
static struct vreg *vreg_mmc;
static unsigned long vreg_sts;
static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd)
{
int rc = 0;
struct platform_device *pdev;
pdev = container_of(dv, struct platform_device, dev);
if (vdd == 0) {
if (!vreg_sts)
return 0;
clear_bit(pdev->id, &vreg_sts);
if (!vreg_sts) {
rc = vreg_disable(vreg_mmc);
if (rc)
pr_err("vreg_mmc disable failed for slot "
"%d: %d\n", pdev->id, rc);
}
return 0;
}
if (!vreg_sts) {
rc = vreg_set_level(vreg_mmc, 2900);
if (rc)
pr_err("vreg_mmc set level failed for slot %d: %d\n",
pdev->id, rc);
rc = vreg_enable(vreg_mmc);
if (rc)
pr_err("vreg_mmc enable failed for slot %d: %d\n",
pdev->id, rc);
}
set_bit(pdev->id, &vreg_sts);
return 0;
}
static struct msm_mmc_gpio_data sdc1_gpio = {
.gpio = sdc1_gpio_cfg,
.size = ARRAY_SIZE(sdc1_gpio_cfg),
};
static struct msm_mmc_platform_data qsd8x50_sdc1_data = {
.ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
.translate_vdd = msm_sdcc_setup_power,
.gpio_data = &sdc1_gpio,
};
static void __init qsd8x50_init_mmc(void)
{
vreg_mmc = vreg_get(NULL, "gp5");
if (IS_ERR(vreg_mmc)) {
pr_err("vreg get for vreg_mmc failed (%ld)\n",
PTR_ERR(vreg_mmc));
return;
}
msm_add_sdcc(1, &qsd8x50_sdc1_data, 0, 0);
}
static void __init qsd8x50_map_io(void)
{
msm_map_qsd8x50_io();
}
static void __init qsd8x50_init_irq(void)
{
msm_init_irq();
msm_init_sirc();
}
static void __init qsd8x50_init(void)
{
msm_device_otg.dev.platform_data = &msm_otg_pdata;
msm_device_hsusb.dev.parent = &msm_device_otg.dev;
msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
platform_add_devices(devices, ARRAY_SIZE(devices));
qsd8x50_init_mmc();
}
static void __init qsd8x50_init_late(void)
{
smd_debugfs_init();
}
MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
.atag_offset = 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
.init_late = qsd8x50_init_late,
.init_time = qsd8x50_timer_init,
MACHINE_END
MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
.atag_offset = 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
.init_late = qsd8x50_init_late,
.init_time = qsd8x50_timer_init,
MACHINE_END

114
arch/arm/mach-msm/board-sapphire.c
View File

@ -1,114 +0,0 @@
/* linux/arch/arm/mach-msm/board-sapphire.c
* Copyright (C) 2007-2009 HTC Corporation.
* Author: Thomas Tsai <thomas_tsai@htc.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <mach/vreg.h>
#include <asm/io.h>
#include <asm/delay.h>
#include <asm/setup.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/memblock.h>
#include "gpio_chip.h"
#include "board-sapphire.h"
#include "proc_comm.h"
#include "devices.h"
#include "common.h"
void msm_init_irq(void);
void msm_init_gpio(void);
static struct platform_device *devices[] __initdata = {
&msm_device_smd,
&msm_device_dmov,
&msm_device_nand,
&msm_device_uart1,
&msm_device_uart3,
};
void msm_timer_init(void);
static void __init sapphire_init_irq(void)
{
msm_init_irq();
}
static void __init sapphire_init(void)
{
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static struct map_desc sapphire_io_desc[] __initdata = {
{
.virtual = SAPPHIRE_CPLD_BASE,
.pfn = __phys_to_pfn(SAPPHIRE_CPLD_START),
.length = SAPPHIRE_CPLD_SIZE,
.type = MT_DEVICE_NONSHARED
}
};
static void __init sapphire_fixup(struct tag *tags, char **cmdline)
{
int smi_sz = parse_tag_smi((const struct tag *)tags);
if (smi_sz == 32) {
memblock_add(PHYS_OFFSET, 84*SZ_1M);
} else if (smi_sz == 64) {
memblock_add(PHYS_OFFSET, 101*SZ_1M);
} else {
memblock_add(PHYS_OFFSET, 101*SZ_1M);
/* Give a default value when not get smi size */
smi_sz = 64;
}
}
static void __init sapphire_map_io(void)
{
msm_map_common_io();
iotable_init(sapphire_io_desc, ARRAY_SIZE(sapphire_io_desc));
msm_clock_init();
}
static void __init sapphire_init_late(void)
{
smd_debugfs_init();
}
MACHINE_START(SAPPHIRE, "sapphire")
/* Maintainer: Brian Swetland <swetland@google.com> */
.atag_offset = 0x100,
.fixup = sapphire_fixup,
.map_io = sapphire_map_io,
.init_irq = sapphire_init_irq,
.init_machine = sapphire_init,
.init_late = sapphire_init_late,
.init_time = msm_timer_init,
MACHINE_END

233
arch/arm/mach-msm/board-trout-gpio.c
View File

@ -1,233 +0,0 @@
/*
* linux/arch/arm/mach-msm/gpio.c
*
* Copyright (C) 2005 HP Labs
* Copyright (C) 2008 Google, Inc.
* Copyright (C) 2009 Pavel Machek <pavel@ucw.cz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include "board-trout.h"
static uint8_t trout_int_mask[2] = {
[0] = 0xff, /* mask all interrupts */
[1] = 0xff,
};
static uint8_t trout_sleep_int_mask[] = {
[0] = 0xff,
[1] = 0xff,
};
struct msm_gpio_chip {
struct gpio_chip chip;
void __iomem *reg; /* Base of register bank */
u8 shadow;
};
#define to_msm_gpio_chip(c) container_of(c, struct msm_gpio_chip, chip)
static int msm_gpiolib_get(struct gpio_chip *chip, unsigned offset)
{
struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
unsigned mask = 1 << offset;
return !!(readb(msm_gpio->reg) & mask);
}
static void msm_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
{
struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
unsigned mask = 1 << offset;
if (val)
msm_gpio->shadow |= mask;
else
msm_gpio->shadow &= ~mask;
writeb(msm_gpio->shadow, msm_gpio->reg);
}
static int msm_gpiolib_direction_input(struct gpio_chip *chip,
unsigned offset)
{
msm_gpiolib_set(chip, offset, 0);
return 0;
}
static int msm_gpiolib_direction_output(struct gpio_chip *chip,
unsigned offset, int val)
{
msm_gpiolib_set(chip, offset, val);
return 0;
}
static int trout_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
return TROUT_GPIO_TO_INT(offset + chip->base);
}
#define TROUT_GPIO_BANK(name, reg_num, base_gpio, shadow_val) \
{ \
.chip = { \
.label = name, \
.direction_input = msm_gpiolib_direction_input,\
.direction_output = msm_gpiolib_direction_output, \
.get = msm_gpiolib_get, \
.set = msm_gpiolib_set, \
.to_irq = trout_gpio_to_irq, \
.base = base_gpio, \
.ngpio = 8, \
}, \
.reg = reg_num + TROUT_CPLD_BASE, \
.shadow = shadow_val, \
}
static struct msm_gpio_chip msm_gpio_banks[] = {
#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9a00000)
/* H2W pins <-> UART1 */
TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x40),
#else
/* H2W pins <-> UART3, Bluetooth <-> UART1 */
TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x80),
#endif
/* I2C pull */
TROUT_GPIO_BANK("MISC3", 0x02, TROUT_GPIO_MISC3_BASE, 0x04),
TROUT_GPIO_BANK("MISC4", 0x04, TROUT_GPIO_MISC4_BASE, 0),
/* mmdi 32k en */
TROUT_GPIO_BANK("MISC5", 0x06, TROUT_GPIO_MISC5_BASE, 0x04),
TROUT_GPIO_BANK("INT2", 0x08, TROUT_GPIO_INT2_BASE, 0),
TROUT_GPIO_BANK("MISC1", 0x0a, TROUT_GPIO_MISC1_BASE, 0),
TROUT_GPIO_BANK("VIRTUAL", 0x12, TROUT_GPIO_VIRTUAL_BASE, 0),
};
static void trout_gpio_irq_ack(struct irq_data *d)
{
int bank = TROUT_INT_TO_BANK(d->irq);
uint8_t mask = TROUT_INT_TO_MASK(d->irq);
int reg = TROUT_BANK_TO_STAT_REG(bank);
/*printk(KERN_INFO "trout_gpio_irq_ack irq %d\n", d->irq);*/
writeb(mask, TROUT_CPLD_BASE + reg);
}
static void trout_gpio_irq_mask(struct irq_data *d)
{
unsigned long flags;
uint8_t reg_val;
int bank = TROUT_INT_TO_BANK(d->irq);
uint8_t mask = TROUT_INT_TO_MASK(d->irq);
int reg = TROUT_BANK_TO_MASK_REG(bank);
local_irq_save(flags);
reg_val = trout_int_mask[bank] |= mask;
/*printk(KERN_INFO "trout_gpio_irq_mask irq %d => %d:%02x\n",
d->irq, bank, reg_val);*/
writeb(reg_val, TROUT_CPLD_BASE + reg);
local_irq_restore(flags);
}
static void trout_gpio_irq_unmask(struct irq_data *d)
{
unsigned long flags;
uint8_t reg_val;
int bank = TROUT_INT_TO_BANK(d->irq);
uint8_t mask = TROUT_INT_TO_MASK(d->irq);
int reg = TROUT_BANK_TO_MASK_REG(bank);
local_irq_save(flags);
reg_val = trout_int_mask[bank] &= ~mask;
/*printk(KERN_INFO "trout_gpio_irq_unmask irq %d => %d:%02x\n",
d->irq, bank, reg_val);*/
writeb(reg_val, TROUT_CPLD_BASE + reg);
local_irq_restore(flags);
}
int trout_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
{
unsigned long flags;
int bank = TROUT_INT_TO_BANK(d->irq);
uint8_t mask = TROUT_INT_TO_MASK(d->irq);
local_irq_save(flags);
if(on)
trout_sleep_int_mask[bank] &= ~mask;
else
trout_sleep_int_mask[bank] |= mask;
local_irq_restore(flags);
return 0;
}
static void trout_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
{
int j, m;
unsigned v;
int bank;
int stat_reg;
int int_base = TROUT_INT_START;
uint8_t int_mask;
for (bank = 0; bank < 2; bank++) {
stat_reg = TROUT_BANK_TO_STAT_REG(bank);
v = readb(TROUT_CPLD_BASE + stat_reg);
int_mask = trout_int_mask[bank];
if (v & int_mask) {
writeb(v & int_mask, TROUT_CPLD_BASE + stat_reg);
printk(KERN_ERR "trout_gpio_irq_handler: got masked "
"interrupt: %d:%02x\n", bank, v & int_mask);
}
v &= ~int_mask;
while (v) {
m = v & -v;
j = fls(m) - 1;
/*printk(KERN_INFO "msm_gpio_irq_handler %d:%02x %02x b"
"it %d irq %d\n", bank, v, m, j, int_base + j);*/
v &= ~m;
generic_handle_irq(int_base + j);
}
int_base += TROUT_INT_BANK0_COUNT;
}
desc->irq_data.chip->irq_ack(&desc->irq_data);
}
static struct irq_chip trout_gpio_irq_chip = {
.name = "troutgpio",
.irq_ack = trout_gpio_irq_ack,
.irq_mask = trout_gpio_irq_mask,
.irq_unmask = trout_gpio_irq_unmask,
.irq_set_wake = trout_gpio_irq_set_wake,
};
/*
* Called from the processor-specific init to enable GPIO pin support.
*/
int __init trout_init_gpio(void)
{
int i;
for(i = TROUT_INT_START; i <= TROUT_INT_END; i++) {
irq_set_chip_and_handler(i, &trout_gpio_irq_chip,
handle_edge_irq);
set_irq_flags(i, IRQF_VALID);
}
for (i = 0; i < ARRAY_SIZE(msm_gpio_banks); i++)
gpiochip_add(&msm_gpio_banks[i].chip);
irq_set_irq_type(MSM_GPIO_TO_INT(17), IRQF_TRIGGER_HIGH);
irq_set_chained_handler(MSM_GPIO_TO_INT(17), trout_gpio_irq_handler);
irq_set_irq_wake(MSM_GPIO_TO_INT(17), 1);
return 0;
}
postcore_initcall(trout_init_gpio);

185
arch/arm/mach-msm/board-trout-mmc.c
View File

@ -1,185 +0,0 @@
/* linux/arch/arm/mach-msm/board-trout-mmc.c
** Author: Brian Swetland <swetland@google.com>
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sdio_ids.h>
#include <linux/err.h>
#include <linux/debugfs.h>
#include <asm/io.h>
#include <mach/vreg.h>
#include <linux/platform_data/mmc-msm_sdcc.h>
#include "devices.h"
#include "board-trout.h"
#include "proc_comm.h"
#define DEBUG_SDSLOT_VDD 1
/* ---- COMMON ---- */
static void config_gpio_table(uint32_t *table, int len)
{
int n;
unsigned id;
for(n = 0; n < len; n++) {
id = table[n];
msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &id, 0);
}
}
/* ---- SDCARD ---- */
static uint32_t sdcard_on_gpio_table[] = {
PCOM_GPIO_CFG(62, 2, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_8MA), /* CLK */
PCOM_GPIO_CFG(63, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* CMD */
PCOM_GPIO_CFG(64, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT3 */
PCOM_GPIO_CFG(65, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT2 */
PCOM_GPIO_CFG(66, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT1 */
PCOM_GPIO_CFG(67, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT0 */
};
static uint32_t sdcard_off_gpio_table[] = {
PCOM_GPIO_CFG(62, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CLK */
PCOM_GPIO_CFG(63, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CMD */
PCOM_GPIO_CFG(64, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT3 */
PCOM_GPIO_CFG(65, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT2 */
PCOM_GPIO_CFG(66, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT1 */
PCOM_GPIO_CFG(67, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT0 */
};
static uint opt_disable_sdcard;
static int __init trout_disablesdcard_setup(char *str)
{
int cal = simple_strtol(str, NULL, 0);
opt_disable_sdcard = cal;
return 1;
}
__setup("board_trout.disable_sdcard=", trout_disablesdcard_setup);
static struct vreg *vreg_sdslot; /* SD slot power */
struct mmc_vdd_xlat {
int mask;
int level;
};
static struct mmc_vdd_xlat mmc_vdd_table[] = {
{ MMC_VDD_165_195, 1800 },
{ MMC_VDD_20_21, 2050 },
{ MMC_VDD_21_22, 2150 },
{ MMC_VDD_22_23, 2250 },
{ MMC_VDD_23_24, 2350 },
{ MMC_VDD_24_25, 2450 },
{ MMC_VDD_25_26, 2550 },
{ MMC_VDD_26_27, 2650 },
{ MMC_VDD_27_28, 2750 },
{ MMC_VDD_28_29, 2850 },
{ MMC_VDD_29_30, 2950 },
};
static unsigned int sdslot_vdd = 0xffffffff;
static unsigned int sdslot_vreg_enabled;
static uint32_t trout_sdslot_switchvdd(struct device *dev, unsigned int vdd)
{
int i, rc;
BUG_ON(!vreg_sdslot);
if (vdd == sdslot_vdd)
return 0;
sdslot_vdd = vdd;
if (vdd == 0) {
#if DEBUG_SDSLOT_VDD
printk("%s: Disabling SD slot power\n", __func__);
#endif
config_gpio_table(sdcard_off_gpio_table,
ARRAY_SIZE(sdcard_off_gpio_table));
vreg_disable(vreg_sdslot);
sdslot_vreg_enabled = 0;
return 0;
}
if (!sdslot_vreg_enabled) {
rc = vreg_enable(vreg_sdslot);
if (rc) {
printk(KERN_ERR "%s: Error enabling vreg (%d)\n",
__func__, rc);
}
config_gpio_table(sdcard_on_gpio_table,
ARRAY_SIZE(sdcard_on_gpio_table));
sdslot_vreg_enabled = 1;
}
for (i = 0; i < ARRAY_SIZE(mmc_vdd_table); i++) {
if (mmc_vdd_table[i].mask == (1 << vdd)) {
#if DEBUG_SDSLOT_VDD
printk("%s: Setting level to %u\n",
__func__, mmc_vdd_table[i].level);
#endif
rc = vreg_set_level(vreg_sdslot,
mmc_vdd_table[i].level);
if (rc) {
printk(KERN_ERR
"%s: Error setting vreg level (%d)\n",
__func__, rc);
}
return 0;
}
}
printk(KERN_ERR "%s: Invalid VDD %d specified\n", __func__, vdd);
return 0;
}
static unsigned int trout_sdslot_status(struct device *dev)
{
unsigned int status;
status = (unsigned int) gpio_get_value(TROUT_GPIO_SDMC_CD_N);
return (!status);
}
#define TROUT_MMC_VDD MMC_VDD_165_195 | MMC_VDD_20_21 | MMC_VDD_21_22 \
| MMC_VDD_22_23 | MMC_VDD_23_24 | MMC_VDD_24_25 \
| MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 \
| MMC_VDD_28_29 | MMC_VDD_29_30
static struct msm_mmc_platform_data trout_sdslot_data = {
.ocr_mask = TROUT_MMC_VDD,
.status = trout_sdslot_status,
.translate_vdd = trout_sdslot_switchvdd,
};
int __init trout_init_mmc(unsigned int sys_rev)
{
sdslot_vreg_enabled = 0;
vreg_sdslot = vreg_get(0, "gp6");
if (IS_ERR(vreg_sdslot))
return PTR_ERR(vreg_sdslot);
irq_set_irq_wake(TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 1);
if (!opt_disable_sdcard)
msm_add_sdcc(2, &trout_sdslot_data,
TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 0);
else
printk(KERN_INFO "trout: SD-Card interface disabled\n");
return 0;
}

292
arch/arm/mach-msm/board-trout-panel.c
View File

@ -1,292 +0,0 @@
/* linux/arch/arm/mach-msm/board-trout-mddi.c
** Author: Brian Swetland <swetland@google.com>
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/leds.h>
#include <linux/err.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/system_info.h>
#include <linux/platform_data/video-msm_fb.h>
#include <mach/vreg.h>
#include "board-trout.h"
#include "proc_comm.h"
#include "clock-pcom.h"
#include "devices.h"
#define TROUT_DEFAULT_BACKLIGHT_BRIGHTNESS 255
#define MDDI_CLIENT_CORE_BASE 0x108000
#define LCD_CONTROL_BLOCK_BASE 0x110000
#define SPI_BLOCK_BASE 0x120000
#define I2C_BLOCK_BASE 0x130000
#define PWM_BLOCK_BASE 0x140000
#define GPIO_BLOCK_BASE 0x150000
#define SYSTEM_BLOCK1_BASE 0x160000
#define SYSTEM_BLOCK2_BASE 0x170000
#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24)
#define SYSCLKENA (MDDI_CLIENT_CORE_BASE|0x2C)
#define PWM0OFF (PWM_BLOCK_BASE|0x1C)
#define V_VDDE2E_VDD2_GPIO 0
#define MDDI_RST_N 82
#define MDDICAP0 (MDDI_CLIENT_CORE_BASE|0x00)
#define MDDICAP1 (MDDI_CLIENT_CORE_BASE|0x04)
#define MDDICAP2 (MDDI_CLIENT_CORE_BASE|0x08)
#define MDDICAP3 (MDDI_CLIENT_CORE_BASE|0x0C)
#define MDCAPCHG (MDDI_CLIENT_CORE_BASE|0x10)
#define MDCRCERC (MDDI_CLIENT_CORE_BASE|0x14)
#define TTBUSSEL (MDDI_CLIENT_CORE_BASE|0x18)
#define DPSET0 (MDDI_CLIENT_CORE_BASE|0x1C)
#define DPSET1 (MDDI_CLIENT_CORE_BASE|0x20)
#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24)
#define DPRUN (MDDI_CLIENT_CORE_BASE|0x28)
#define SYSCKENA (MDDI_CLIENT_CORE_BASE|0x2C)
#define TESTMODE (MDDI_CLIENT_CORE_BASE|0x30)
#define FIFOMONI (MDDI_CLIENT_CORE_BASE|0x34)
#define INTMONI (MDDI_CLIENT_CORE_BASE|0x38)
#define MDIOBIST (MDDI_CLIENT_CORE_BASE|0x3C)
#define MDIOPSET (MDDI_CLIENT_CORE_BASE|0x40)
#define BITMAP0 (MDDI_CLIENT_CORE_BASE|0x44)
#define BITMAP1 (MDDI_CLIENT_CORE_BASE|0x48)
#define BITMAP2 (MDDI_CLIENT_CORE_BASE|0x4C)
#define BITMAP3 (MDDI_CLIENT_CORE_BASE|0x50)
#define BITMAP4 (MDDI_CLIENT_CORE_BASE|0x54)
#define SRST (LCD_CONTROL_BLOCK_BASE|0x00)
#define PORT_ENB (LCD_CONTROL_BLOCK_BASE|0x04)
#define START (LCD_CONTROL_BLOCK_BASE|0x08)
#define PORT (LCD_CONTROL_BLOCK_BASE|0x0C)
#define CMN (LCD_CONTROL_BLOCK_BASE|0x10)
#define GAMMA (LCD_CONTROL_BLOCK_BASE|0x14)
#define INTFLG (LCD_CONTROL_BLOCK_BASE|0x18)
#define INTMSK (LCD_CONTROL_BLOCK_BASE|0x1C)
#define MPLFBUF (LCD_CONTROL_BLOCK_BASE|0x20)
#define HDE_LEFT (LCD_CONTROL_BLOCK_BASE|0x24)
#define VDE_TOP (LCD_CONTROL_BLOCK_BASE|0x28)
#define PXL (LCD_CONTROL_BLOCK_BASE|0x30)
#define HCYCLE (LCD_CONTROL_BLOCK_BASE|0x34)
#define HSW (LCD_CONTROL_BLOCK_BASE|0x38)
#define HDE_START (LCD_CONTROL_BLOCK_BASE|0x3C)
#define HDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x40)
#define VCYCLE (LCD_CONTROL_BLOCK_BASE|0x44)
#define VSW (LCD_CONTROL_BLOCK_BASE|0x48)
#define VDE_START (LCD_CONTROL_BLOCK_BASE|0x4C)
#define VDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x50)
#define WAKEUP (LCD_CONTROL_BLOCK_BASE|0x54)
#define WSYN_DLY (LCD_CONTROL_BLOCK_BASE|0x58)
#define REGENB (LCD_CONTROL_BLOCK_BASE|0x5C)
#define VSYNIF (LCD_CONTROL_BLOCK_BASE|0x60)
#define WRSTB (LCD_CONTROL_BLOCK_BASE|0x64)
#define RDSTB (LCD_CONTROL_BLOCK_BASE|0x68)
#define ASY_DATA (LCD_CONTROL_BLOCK_BASE|0x6C)
#define ASY_DATB (LCD_CONTROL_BLOCK_BASE|0x70)
#define ASY_DATC (LCD_CONTROL_BLOCK_BASE|0x74)
#define ASY_DATD (LCD_CONTROL_BLOCK_BASE|0x78)
#define ASY_DATE (LCD_CONTROL_BLOCK_BASE|0x7C)
#define ASY_DATF (LCD_CONTROL_BLOCK_BASE|0x80)
#define ASY_DATG (LCD_CONTROL_BLOCK_BASE|0x84)
#define ASY_DATH (LCD_CONTROL_BLOCK_BASE|0x88)
#define ASY_CMDSET (LCD_CONTROL_BLOCK_BASE|0x8C)
#define SSICTL (SPI_BLOCK_BASE|0x00)
#define SSITIME (SPI_BLOCK_BASE|0x04)
#define SSITX (SPI_BLOCK_BASE|0x08)
#define SSIRX (SPI_BLOCK_BASE|0x0C)
#define SSIINTC (SPI_BLOCK_BASE|0x10)
#define SSIINTS (SPI_BLOCK_BASE|0x14)
#define SSIDBG1 (SPI_BLOCK_BASE|0x18)
#define SSIDBG2 (SPI_BLOCK_BASE|0x1C)
#define SSIID (SPI_BLOCK_BASE|0x20)
#define WKREQ (SYSTEM_BLOCK1_BASE|0x00)
#define CLKENB (SYSTEM_BLOCK1_BASE|0x04)
#define DRAMPWR (SYSTEM_BLOCK1_BASE|0x08)
#define INTMASK (SYSTEM_BLOCK1_BASE|0x0C)
#define GPIOSEL (SYSTEM_BLOCK2_BASE|0x00)
#define GPIODATA (GPIO_BLOCK_BASE|0x00)
#define GPIODIR (GPIO_BLOCK_BASE|0x04)
#define GPIOIS (GPIO_BLOCK_BASE|0x08)
#define GPIOIBE (GPIO_BLOCK_BASE|0x0C)
#define GPIOIEV (GPIO_BLOCK_BASE|0x10)
#define GPIOIE (GPIO_BLOCK_BASE|0x14)
#define GPIORIS (GPIO_BLOCK_BASE|0x18)
#define GPIOMIS (GPIO_BLOCK_BASE|0x1C)
#define GPIOIC (GPIO_BLOCK_BASE|0x20)
#define GPIOOMS (GPIO_BLOCK_BASE|0x24)
#define GPIOPC (GPIO_BLOCK_BASE|0x28)
#define GPIOID (GPIO_BLOCK_BASE|0x30)
#define SPI_WRITE(reg, val) \
{ SSITX, 0x00010000 | (((reg) & 0xff) << 8) | ((val) & 0xff) }, \
{ 0, 5 },
#define SPI_WRITE1(reg) \
{ SSITX, (reg) & 0xff }, \
{ 0, 5 },
struct mddi_table {
uint32_t reg;
uint32_t value;
};
static struct mddi_table mddi_toshiba_init_table[] = {
{ DPSET0, 0x09e90046 },
{ DPSET1, 0x00000118 },
{ DPSUS, 0x00000000 },
{ DPRUN, 0x00000001 },
{ 1, 14 }, /* msleep 14 */
{ SYSCKENA, 0x00000001 },
{ CLKENB, 0x0000A1EF }, /* # SYS.CLKENB # Enable clocks for each module (without DCLK , i2cCLK) */
{ GPIODATA, 0x02000200 }, /* # GPI .GPIODATA # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0 */
{ GPIODIR, 0x000030D }, /* 24D # GPI .GPIODIR # Select direction of GPIO port (0,2,3,6,9 output) */
{ GPIOSEL, 0/*0x00000173*/}, /* # SYS.GPIOSEL # GPIO port multiplexing control */
{ GPIOPC, 0x03C300C0 }, /* # GPI .GPIOPC # GPIO2,3 PD cut */
{ WKREQ, 0x00000000 }, /* # SYS.WKREQ # Wake-up request event is VSYNC alignment */
{ GPIOIBE, 0x000003FF },
{ GPIOIS, 0x00000000 },
{ GPIOIC, 0x000003FF },
{ GPIOIE, 0x00000000 },
{ GPIODATA, 0x00040004 }, /* # GPI .GPIODATA # eDRAM VD supply */
{ 1, 1 }, /* msleep 1 */
{ GPIODATA, 0x02040004 }, /* # GPI .GPIODATA # eDRAM VD supply */
{ DRAMPWR, 0x00000001 }, /* eDRAM power */
};
#define GPIOSEL_VWAKEINT (1U << 0)
#define INTMASK_VWAKEOUT (1U << 0)
static int trout_new_backlight = 1;
static struct vreg *vreg_mddi_1v5;
static struct vreg *vreg_lcm_2v85;
static void trout_process_mddi_table(struct msm_mddi_client_data *client_data,
struct mddi_table *table, size_t count)
{
int i;
for (i = 0; i < count; i++) {
uint32_t reg = table[i].reg;
uint32_t value = table[i].value;
if (reg == 0)
udelay(value);
else if (reg == 1)
msleep(value);
else
client_data->remote_write(client_data, value, reg);
}
}
static int trout_mddi_toshiba_client_init(
struct msm_mddi_bridge_platform_data *bridge_data,
struct msm_mddi_client_data *client_data)
{
int panel_id;
client_data->auto_hibernate(client_data, 0);
trout_process_mddi_table(client_data, mddi_toshiba_init_table,
ARRAY_SIZE(mddi_toshiba_init_table));
client_data->auto_hibernate(client_data, 1);
panel_id = (client_data->remote_read(client_data, GPIODATA) >> 4) & 3;
if (panel_id > 1) {
printk(KERN_WARNING "unknown panel id at mddi_enable\n");
return -1;
}
return 0;
}
static int trout_mddi_toshiba_client_uninit(
struct msm_mddi_bridge_platform_data *bridge_data,
struct msm_mddi_client_data *client_data)
{
return 0;
}
static struct resource resources_msm_fb[] = {
{
.start = MSM_FB_BASE,
.end = MSM_FB_BASE + MSM_FB_SIZE,
.flags = IORESOURCE_MEM,
},
};
struct msm_mddi_bridge_platform_data toshiba_client_data = {
.init = trout_mddi_toshiba_client_init,
.uninit = trout_mddi_toshiba_client_uninit,
.fb_data = {
.xres = 320,
.yres = 480,
.width = 45,
.height = 67,
.output_format = 0,
},
};
static struct msm_mddi_platform_data mddi_pdata = {
.clk_rate = 122880000,
.fb_resource = resources_msm_fb,
.num_clients = 1,
.client_platform_data = {
{
.product_id = (0xd263 << 16 | 0),
.name = "mddi_c_d263_0000",
.id = 0,
.client_data = &toshiba_client_data,
.clk_rate = 0,
},
},
};
int __init trout_init_panel(void)
{
int rc;
if (!machine_is_trout())
return 0;
vreg_mddi_1v5 = vreg_get(0, "gp2");
if (IS_ERR(vreg_mddi_1v5))
return PTR_ERR(vreg_mddi_1v5);
vreg_lcm_2v85 = vreg_get(0, "gp4");
if (IS_ERR(vreg_lcm_2v85))
return PTR_ERR(vreg_lcm_2v85);
trout_new_backlight = system_rev >= 5;
if (trout_new_backlight) {
uint32_t config = PCOM_GPIO_CFG(27, 0, GPIO_OUTPUT,
GPIO_NO_PULL, GPIO_8MA);
msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
} else {
uint32_t config = PCOM_GPIO_CFG(27, 1, GPIO_OUTPUT,
GPIO_NO_PULL, GPIO_8MA);
uint32_t id = P_GP_CLK;
uint32_t rate = 19200000;
msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
if (id < 0)
pr_err("trout_init_panel: set clock rate failed\n");
}
rc = platform_device_register(&msm_device_mdp);
if (rc)
return rc;
msm_device_mddi0.dev.platform_data = &mddi_pdata;
return platform_device_register(&msm_device_mddi0);
}
device_initcall(trout_init_panel);

111
arch/arm/mach-msm/board-trout.c
View File

@ -1,111 +0,0 @@
/* linux/arch/arm/mach-msm/board-trout.c
*
* Copyright (C) 2009 Google, Inc.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#define pr_fmt(fmt) "%s: " fmt, __func__
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/clkdev.h>
#include <linux/memblock.h>
#include <asm/system_info.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
#include <mach/hardware.h>
#include <mach/msm_iomap.h>
#include "devices.h"
#include "board-trout.h"
#include "common.h"
extern int trout_init_mmc(unsigned int);
static struct platform_device *devices[] __initdata = {
&msm_clock_7x01a,
&msm_device_gpio_7201,
&msm_device_uart3,
&msm_device_smd,
&msm_device_nand,
&msm_device_hsusb,
&msm_device_i2c,
};
static void __init trout_init_early(void)
{
arch_ioremap_caller = __msm_ioremap_caller;
}
static void __init trout_init_irq(void)
{
msm_init_irq();
}
static void __init trout_fixup(struct tag *tags, char **cmdline)
{
memblock_add(PHYS_OFFSET, 101*SZ_1M);
}
static void __init trout_init(void)
{
int rc;
platform_add_devices(devices, ARRAY_SIZE(devices));
if (IS_ENABLED(CONFIG_MMC)) {
rc = trout_init_mmc(system_rev);
if (rc)
pr_crit("MMC init failure (%d)\n", rc);
}
}
static struct map_desc trout_io_desc[] __initdata = {
{
.virtual = (unsigned long)TROUT_CPLD_BASE,
.pfn = __phys_to_pfn(TROUT_CPLD_START),
.length = TROUT_CPLD_SIZE,
.type = MT_DEVICE_NONSHARED
}
};
static void __init trout_map_io(void)
{
msm_map_common_io();
iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc));
#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9c00000)
/* route UART3 to the "H2W" extended usb connector */
writeb(0x80, TROUT_CPLD_BASE + 0x00);
#endif
}
static void __init trout_init_late(void)
{
smd_debugfs_init();
}
MACHINE_START(TROUT, "HTC Dream")
.atag_offset = 0x100,
.fixup = trout_fixup,
.map_io = trout_map_io,
.init_early = trout_init_early,
.init_irq = trout_init_irq,
.init_machine = trout_init,
.init_late = trout_init_late,
.init_time = msm7x01_timer_init,
MACHINE_END

162
arch/arm/mach-msm/board-trout.h
View File

@ -1,162 +0,0 @@
/* linux/arch/arm/mach-msm/board-trout.h
** Author: Brian Swetland <swetland@google.com>
*/
#ifndef __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
#define __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
#include "common.h"
#define MSM_SMI_BASE 0x00000000
#define MSM_SMI_SIZE 0x00800000
#define MSM_EBI_BASE 0x10000000
#define MSM_EBI_SIZE 0x06e00000
#define MSM_PMEM_GPU0_BASE 0x00000000
#define MSM_PMEM_GPU0_SIZE 0x00700000
#define MSM_PMEM_MDP_BASE 0x02000000
#define MSM_PMEM_MDP_SIZE 0x00800000
#define MSM_PMEM_ADSP_BASE 0x02800000
#define MSM_PMEM_ADSP_SIZE 0x00800000
#define MSM_PMEM_CAMERA_BASE 0x03000000
#define MSM_PMEM_CAMERA_SIZE 0x00800000
#define MSM_FB_BASE 0x03800000
#define MSM_FB_SIZE 0x00100000
#define MSM_LINUX_BASE MSM_EBI_BASE
#define MSM_LINUX_SIZE 0x06500000
#define MSM_PMEM_GPU1_SIZE 0x800000
#define MSM_PMEM_GPU1_BASE (MSM_RAM_CONSOLE_BASE - MSM_PMEM_GPU1_SIZE)
#define MSM_RAM_CONSOLE_BASE (MSM_EBI_BASE + 0x6d00000)
#define MSM_RAM_CONSOLE_SIZE (128 * SZ_1K)
#if (MSM_FB_BASE + MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE)
#error invalid memory map
#endif
#define DECLARE_MSM_IOMAP
#include <mach/msm_iomap.h>
#define TROUT_4_BALL_UP_0 1
#define TROUT_4_BALL_LEFT_0 18
#define TROUT_4_BALL_DOWN_0 57
#define TROUT_4_BALL_RIGHT_0 91
#define TROUT_5_BALL_UP_0 94
#define TROUT_5_BALL_LEFT_0 18
#define TROUT_5_BALL_DOWN_0 90
#define TROUT_5_BALL_RIGHT_0 19
#define TROUT_POWER_KEY 20
#define TROUT_4_TP_LS_EN 19
#define TROUT_5_TP_LS_EN 1
#define TROUT_CPLD_BASE IOMEM(0xE8100000)
#define TROUT_CPLD_START 0x98000000
#define TROUT_CPLD_SIZE SZ_4K
#define TROUT_GPIO_CABLE_IN1 (83)
#define TROUT_GPIO_CABLE_IN2 (49)
#define TROUT_GPIO_START (128)
#define TROUT_GPIO_INT_MASK0_REG (0x0c)
#define TROUT_GPIO_INT_STAT0_REG (0x0e)
#define TROUT_GPIO_INT_MASK1_REG (0x14)
#define TROUT_GPIO_INT_STAT1_REG (0x10)
#define TROUT_GPIO_HAPTIC_PWM (28)
#define TROUT_GPIO_PS_HOLD (25)
#define TROUT_GPIO_MISC2_BASE (TROUT_GPIO_START + 0x00)
#define TROUT_GPIO_MISC3_BASE (TROUT_GPIO_START + 0x08)
#define TROUT_GPIO_MISC4_BASE (TROUT_GPIO_START + 0x10)
#define TROUT_GPIO_MISC5_BASE (TROUT_GPIO_START + 0x18)
#define TROUT_GPIO_INT2_BASE (TROUT_GPIO_START + 0x20)
#define TROUT_GPIO_MISC1_BASE (TROUT_GPIO_START + 0x28)
#define TROUT_GPIO_VIRTUAL_BASE (TROUT_GPIO_START + 0x30)
#define TROUT_GPIO_INT5_BASE (TROUT_GPIO_START + 0x48)
#define TROUT_GPIO_CHARGER_EN (TROUT_GPIO_MISC2_BASE + 0)
#define TROUT_GPIO_ISET (TROUT_GPIO_MISC2_BASE + 1)
#define TROUT_GPIO_H2W_DAT_DIR (TROUT_GPIO_MISC2_BASE + 2)
#define TROUT_GPIO_H2W_CLK_DIR (TROUT_GPIO_MISC2_BASE + 3)
#define TROUT_GPIO_H2W_DAT_GPO (TROUT_GPIO_MISC2_BASE + 4)
#define TROUT_GPIO_H2W_CLK_GPO (TROUT_GPIO_MISC2_BASE + 5)
#define TROUT_GPIO_H2W_SEL0 (TROUT_GPIO_MISC2_BASE + 6)
#define TROUT_GPIO_H2W_SEL1 (TROUT_GPIO_MISC2_BASE + 7)
#define TROUT_GPIO_SPOTLIGHT_EN (TROUT_GPIO_MISC3_BASE + 0)
#define TROUT_GPIO_FLASH_EN (TROUT_GPIO_MISC3_BASE + 1)
#define TROUT_GPIO_I2C_PULL (TROUT_GPIO_MISC3_BASE + 2)
#define TROUT_GPIO_TP_I2C_PULL (TROUT_GPIO_MISC3_BASE + 3)
#define TROUT_GPIO_TP_EN (TROUT_GPIO_MISC3_BASE + 4)
#define TROUT_GPIO_JOG_EN (TROUT_GPIO_MISC3_BASE + 5)
#define TROUT_GPIO_UI_LED_EN (TROUT_GPIO_MISC3_BASE + 6)
#define TROUT_GPIO_QTKEY_LED_EN (TROUT_GPIO_MISC3_BASE + 7)
#define TROUT_GPIO_VCM_PWDN (TROUT_GPIO_MISC4_BASE + 0)
#define TROUT_GPIO_USB_H2W_SW (TROUT_GPIO_MISC4_BASE + 1)
#define TROUT_GPIO_COMPASS_RST_N (TROUT_GPIO_MISC4_BASE + 2)
#define TROUT_GPIO_HAPTIC_EN_UP (TROUT_GPIO_MISC4_BASE + 3)
#define TROUT_GPIO_HAPTIC_EN_MAIN (TROUT_GPIO_MISC4_BASE + 4)
#define TROUT_GPIO_USB_PHY_RST_N (TROUT_GPIO_MISC4_BASE + 5)
#define TROUT_GPIO_WIFI_PA_RESETX (TROUT_GPIO_MISC4_BASE + 6)
#define TROUT_GPIO_WIFI_EN (TROUT_GPIO_MISC4_BASE + 7)
#define TROUT_GPIO_BT_32K_EN (TROUT_GPIO_MISC5_BASE + 0)
#define TROUT_GPIO_MAC_32K_EN (TROUT_GPIO_MISC5_BASE + 1)
#define TROUT_GPIO_MDDI_32K_EN (TROUT_GPIO_MISC5_BASE + 2)
#define TROUT_GPIO_COMPASS_32K_EN (TROUT_GPIO_MISC5_BASE + 3)
#define TROUT_GPIO_NAVI_ACT_N (TROUT_GPIO_INT2_BASE + 0)
#define TROUT_GPIO_COMPASS_IRQ (TROUT_GPIO_INT2_BASE + 1)
#define TROUT_GPIO_SLIDING_DET (TROUT_GPIO_INT2_BASE + 2)
#define TROUT_GPIO_AUD_HSMIC_DET_N (TROUT_GPIO_INT2_BASE + 3)
#define TROUT_GPIO_SD_DOOR_N (TROUT_GPIO_INT2_BASE + 4)
#define TROUT_GPIO_CAM_BTN_STEP1_N (TROUT_GPIO_INT2_BASE + 5)
#define TROUT_GPIO_CAM_BTN_STEP2_N (TROUT_GPIO_INT2_BASE + 6)
#define TROUT_GPIO_TP_ATT_N (TROUT_GPIO_INT2_BASE + 7)
#define TROUT_GPIO_BANK0_FIRST_INT_SOURCE (TROUT_GPIO_NAVI_ACT_N)
#define TROUT_GPIO_BANK0_LAST_INT_SOURCE (TROUT_GPIO_TP_ATT_N)
#define TROUT_GPIO_H2W_DAT_GPI (TROUT_GPIO_MISC1_BASE + 0)
#define TROUT_GPIO_H2W_CLK_GPI (TROUT_GPIO_MISC1_BASE + 1)
#define TROUT_GPIO_CPLD128_VER_0 (TROUT_GPIO_MISC1_BASE + 4)
#define TROUT_GPIO_CPLD128_VER_1 (TROUT_GPIO_MISC1_BASE + 5)
#define TROUT_GPIO_CPLD128_VER_2 (TROUT_GPIO_MISC1_BASE + 6)
#define TROUT_GPIO_CPLD128_VER_3 (TROUT_GPIO_MISC1_BASE + 7)
#define TROUT_GPIO_SDMC_CD_N (TROUT_GPIO_VIRTUAL_BASE + 0)
#define TROUT_GPIO_END (TROUT_GPIO_SDMC_CD_N)
#define TROUT_GPIO_BANK1_FIRST_INT_SOURCE (TROUT_GPIO_SDMC_CD_N)
#define TROUT_GPIO_BANK1_LAST_INT_SOURCE (TROUT_GPIO_SDMC_CD_N)
#define TROUT_GPIO_VIRTUAL_TO_REAL_OFFSET \
(TROUT_GPIO_INT5_BASE - TROUT_GPIO_VIRTUAL_BASE)
#define TROUT_INT_START (NR_MSM_IRQS + NR_GPIO_IRQS)
#define TROUT_INT_BANK0_COUNT (8)
#define TROUT_INT_BANK1_START (TROUT_INT_START + TROUT_INT_BANK0_COUNT)
#define TROUT_INT_BANK1_COUNT (1)
#define TROUT_INT_END (TROUT_INT_START + TROUT_INT_BANK0_COUNT + \
TROUT_INT_BANK1_COUNT - 1)
#define TROUT_GPIO_TO_INT(n) (((n) <= TROUT_GPIO_BANK0_LAST_INT_SOURCE) ? \
(TROUT_INT_START - TROUT_GPIO_BANK0_FIRST_INT_SOURCE + (n)) : \
(TROUT_INT_BANK1_START - TROUT_GPIO_BANK1_FIRST_INT_SOURCE + (n)))
#define TROUT_INT_TO_BANK(n) ((n - TROUT_INT_START) / TROUT_INT_BANK0_COUNT)
#define TROUT_INT_TO_MASK(n) (1U << ((n - TROUT_INT_START) & 7))
#define TROUT_BANK_TO_MASK_REG(bank) \
(bank ? TROUT_GPIO_INT_MASK1_REG : TROUT_GPIO_INT_MASK0_REG)
#define TROUT_BANK_TO_STAT_REG(bank) \
(bank ? TROUT_GPIO_INT_STAT1_REG : TROUT_GPIO_INT_STAT0_REG)
#endif /* GUARD */

176
arch/arm/mach-msm/clock-pcom.c
View File

@ -1,176 +0,0 @@
/*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2007-2012, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <mach/clk.h>
#include "proc_comm.h"
#include "clock.h"
#include "clock-pcom.h"
struct clk_pcom {
unsigned id;
unsigned long flags;
struct msm_clk msm_clk;
};
static inline struct clk_pcom *to_clk_pcom(struct clk_hw *hw)
{
return container_of(to_msm_clk(hw), struct clk_pcom, msm_clk);
}
static int pc_clk_enable(struct clk_hw *hw)
{
unsigned id = to_clk_pcom(hw)->id;
int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL);
if (rc < 0)
return rc;
else
return (int)id < 0 ? -EINVAL : 0;
}
static void pc_clk_disable(struct clk_hw *hw)
{
unsigned id = to_clk_pcom(hw)->id;
msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL);
}
static int pc_clk_reset(struct clk_hw *hw, enum clk_reset_action action)
{
int rc;
unsigned id = to_clk_pcom(hw)->id;
if (action == CLK_RESET_ASSERT)
rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_ASSERT, &id, NULL);
else
rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_DEASSERT, &id, NULL);
if (rc < 0)
return rc;
else
return (int)id < 0 ? -EINVAL : 0;
}
static int pc_clk_set_rate(struct clk_hw *hw, unsigned long new_rate,
unsigned long p_rate)
{
struct clk_pcom *p = to_clk_pcom(hw);
unsigned id = p->id, rate = new_rate;
int rc;
/*
* The rate _might_ be rounded off to the nearest KHz value by the
* remote function. So a return value of 0 doesn't necessarily mean
* that the exact rate was set successfully.
*/
if (p->flags & CLKFLAG_MIN)
rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
else
rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
if (rc < 0)
return rc;
else
return (int)id < 0 ? -EINVAL : 0;
}
static unsigned long pc_clk_recalc_rate(struct clk_hw *hw, unsigned long p_rate)
{
unsigned id = to_clk_pcom(hw)->id;
if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL))
return 0;
else
return id;
}
static int pc_clk_is_enabled(struct clk_hw *hw)
{
unsigned id = to_clk_pcom(hw)->id;
if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL))
return 0;
else
return id;
}
static long pc_clk_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *p_rate)
{
/* Not really supported; pc_clk_set_rate() does rounding on it's own. */
return rate;
}
static struct clk_ops clk_ops_pcom = {
.enable = pc_clk_enable,
.disable = pc_clk_disable,
.set_rate = pc_clk_set_rate,
.recalc_rate = pc_clk_recalc_rate,
.is_enabled = pc_clk_is_enabled,
.round_rate = pc_clk_round_rate,
};
static int msm_clock_pcom_probe(struct platform_device *pdev)
{
const struct pcom_clk_pdata *pdata = pdev->dev.platform_data;
int i, ret;
for (i = 0; i < pdata->num_lookups; i++) {
const struct clk_pcom_desc *desc = &pdata->lookup[i];
struct clk *c;
struct clk_pcom *p;
struct clk_hw *hw;
struct clk_init_data init;
p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
if (!p)
return -ENOMEM;
p->id = desc->id;
p->flags = desc->flags;
p->msm_clk.reset = pc_clk_reset;
hw = &p->msm_clk.hw;
hw->init = &init;
init.name = desc->name;
init.ops = &clk_ops_pcom;
init.num_parents = 0;
init.flags = CLK_IS_ROOT;
if (!(p->flags & CLKFLAG_AUTO_OFF))
init.flags |= CLK_IGNORE_UNUSED;
c = devm_clk_register(&pdev->dev, hw);
ret = clk_register_clkdev(c, desc->con, desc->dev);
if (ret)
return ret;
}
return 0;
}
static struct platform_driver msm_clock_pcom_driver = {
.probe = msm_clock_pcom_probe,
.driver = {
.name = "msm-clock-pcom",
},
};
module_platform_driver(msm_clock_pcom_driver);
MODULE_LICENSE("GPL v2");

145
arch/arm/mach-msm/clock-pcom.h
View File

@ -1,145 +0,0 @@
/*
* Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H
#define __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H
/* clock IDs used by the modem processor */
#define P_ACPU_CLK 0 /* Applications processor clock */
#define P_ADM_CLK 1 /* Applications data mover clock */
#define P_ADSP_CLK 2 /* ADSP clock */
#define P_EBI1_CLK 3 /* External bus interface 1 clock */
#define P_EBI2_CLK 4 /* External bus interface 2 clock */
#define P_ECODEC_CLK 5 /* External CODEC clock */
#define P_EMDH_CLK 6 /* External MDDI host clock */
#define P_GP_CLK 7 /* General purpose clock */
#define P_GRP_3D_CLK 8 /* Graphics clock */
#define P_I2C_CLK 9 /* I2C clock */
#define P_ICODEC_RX_CLK 10 /* Internal CODEX RX clock */
#define P_ICODEC_TX_CLK 11 /* Internal CODEX TX clock */
#define P_IMEM_CLK 12 /* Internal graphics memory clock */
#define P_MDC_CLK 13 /* MDDI client clock */
#define P_MDP_CLK 14 /* Mobile display processor clock */
#define P_PBUS_CLK 15 /* Peripheral bus clock */
#define P_PCM_CLK 16 /* PCM clock */
#define P_PMDH_CLK 17 /* Primary MDDI host clock */
#define P_SDAC_CLK 18 /* Stereo DAC clock */
#define P_SDC1_CLK 19 /* Secure Digital Card clocks */
#define P_SDC1_P_CLK 20
#define P_SDC2_CLK 21
#define P_SDC2_P_CLK 22
#define P_SDC3_CLK 23
#define P_SDC3_P_CLK 24
#define P_SDC4_CLK 25
#define P_SDC4_P_CLK 26
#define P_TSIF_CLK 27 /* Transport Stream Interface clocks */
#define P_TSIF_REF_CLK 28
#define P_TV_DAC_CLK 29 /* TV clocks */
#define P_TV_ENC_CLK 30
#define P_UART1_CLK 31 /* UART clocks */
#define P_UART2_CLK 32
#define P_UART3_CLK 33
#define P_UART1DM_CLK 34
#define P_UART2DM_CLK 35
#define P_USB_HS_CLK 36 /* High speed USB core clock */
#define P_USB_HS_P_CLK 37 /* High speed USB pbus clock */
#define P_USB_OTG_CLK 38 /* Full speed USB clock */
#define P_VDC_CLK 39 /* Video controller clock */
#define P_VFE_MDC_CLK 40 /* Camera / Video Front End clock */
#define P_VFE_CLK 41 /* VFE MDDI client clock */
#define P_MDP_LCDC_PCLK_CLK 42
#define P_MDP_LCDC_PAD_PCLK_CLK 43
#define P_MDP_VSYNC_CLK 44
#define P_SPI_CLK 45
#define P_VFE_AXI_CLK 46
#define P_USB_HS2_CLK 47 /* High speed USB 2 core clock */
#define P_USB_HS2_P_CLK 48 /* High speed USB 2 pbus clock */
#define P_USB_HS3_CLK 49 /* High speed USB 3 core clock */
#define P_USB_HS3_P_CLK 50 /* High speed USB 3 pbus clock */
#define P_GRP_3D_P_CLK 51 /* Graphics pbus clock */
#define P_USB_PHY_CLK 52 /* USB PHY clock */
#define P_USB_HS_CORE_CLK 53 /* High speed USB 1 core clock */
#define P_USB_HS2_CORE_CLK 54 /* High speed USB 2 core clock */
#define P_USB_HS3_CORE_CLK 55 /* High speed USB 3 core clock */
#define P_CAM_M_CLK 56
#define P_CAMIF_PAD_P_CLK 57
#define P_GRP_2D_CLK 58
#define P_GRP_2D_P_CLK 59
#define P_I2S_CLK 60
#define P_JPEG_CLK 61
#define P_JPEG_P_CLK 62
#define P_LPA_CODEC_CLK 63
#define P_LPA_CORE_CLK 64
#define P_LPA_P_CLK 65
#define P_MDC_IO_CLK 66
#define P_MDC_P_CLK 67
#define P_MFC_CLK 68
#define P_MFC_DIV2_CLK 69
#define P_MFC_P_CLK 70
#define P_QUP_I2C_CLK 71
#define P_ROTATOR_IMEM_CLK 72
#define P_ROTATOR_P_CLK 73
#define P_VFE_CAMIF_CLK 74
#define P_VFE_P_CLK 75
#define P_VPE_CLK 76
#define P_I2C_2_CLK 77
#define P_MI2S_CODEC_RX_S_CLK 78
#define P_MI2S_CODEC_RX_M_CLK 79
#define P_MI2S_CODEC_TX_S_CLK 80
#define P_MI2S_CODEC_TX_M_CLK 81
#define P_PMDH_P_CLK 82
#define P_EMDH_P_CLK 83
#define P_SPI_P_CLK 84
#define P_TSIF_P_CLK 85
#define P_MDP_P_CLK 86
#define P_SDAC_M_CLK 87
#define P_MI2S_S_CLK 88
#define P_MI2S_M_CLK 89
#define P_AXI_ROTATOR_CLK 90
#define P_HDMI_CLK 91
#define P_CSI0_CLK 92
#define P_CSI0_VFE_CLK 93
#define P_CSI0_P_CLK 94
#define P_CSI1_CLK 95
#define P_CSI1_VFE_CLK 96
#define P_CSI1_P_CLK 97
#define P_GSBI_CLK 98
#define P_GSBI_P_CLK 99
#define P_CE_CLK 100 /* Crypto engine */
#define P_CODEC_SSBI_CLK 101
#define P_NR_CLKS 102
struct clk_pcom_desc {
unsigned id;
const char *name;
const char *con;
const char *dev;
unsigned long flags;
};
struct pcom_clk_pdata {
struct clk_pcom_desc *lookup;
u32 num_lookups;
};
#define CLK_PCOM(clk_name, clk_id, clk_dev, clk_flags) { \
.id = P_##clk_id, \
.name = #clk_id, \
.con = clk_name, \
.dev = clk_dev, \
.flags = clk_flags, \
}
#endif

28
arch/arm/mach-msm/clock.c
View File

@ -1,28 +0,0 @@
/* arch/arm/mach-msm/clock.c
*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2007-2012, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/clk-provider.h>
#include <linux/module.h>
#include "clock.h"
int clk_reset(struct clk *clk, enum clk_reset_action action)
{
struct clk_hw *hw = __clk_get_hw(clk);
struct msm_clk *m = to_msm_clk(hw);
return m->reset(hw, action);
}
EXPORT_SYMBOL(clk_reset);

Some files were not shown because too many files have changed in this diff Show More