From d02932889b43524ce6515f09ea3b7df19d124074 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 21 Nov 2018 10:44:54 +0100 Subject: [PATCH] ARM: dts: sun7i: Remove redundant MMC pinmux tuning Some boards override the MMC pin muxing settings in order to enable the pull-ups and change the drive strength to a value higher than the default. While this was needed in the earlier days, this is now the default setting for those pins, and therefore we don't need those board-specific settings anymore. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 5 ----- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 5 ----- arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 5 ----- 3 files changed, 15 deletions(-) diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index e2e540380c6e..e2bfe0058830 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -197,11 +197,6 @@ }; }; -&mmc3_pins { - /* AP6210 requires pull-up */ - bias-pull-up; -}; - &ohci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 95da354cecb7..15c5eae4ca7b 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -215,11 +215,6 @@ }; }; -&mmc3_pins { - /* AP6210 requires pull-up */ - bias-pull-up; -}; - &ohci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 6313d8a8a37c..5f1c4f573d3e 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -167,11 +167,6 @@ }; }; -&mmc3_pins { - /* AP6210 / AP6330 requires pull-up */ - bias-pull-up; -}; - &ohci0 { status = "okay"; };