renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-18 18:23:53 +08:00
Code

ARM: u300: add SPI PL022 to the device tree

Browse Source 
This registers the PL022 PrimeCell from the U300 device
tree. We make a new copy of the platform data for the
device tree boot path, as the old platform data is in an
older file which will be going away.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Linus Walleij 2013-04-19 14:56:46 +02:00
parent 39738cc96b
commit cf4af8670b
2 changed files with 31 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
arch/arm/boot/dts/ste-u300.dts
View File

@ -222,5 +222,17 @@
dmas = <&dmac 14>;
dma-names = "rx";
};
spi: ssp@c0006000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xc0006000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <23>;
dmas = <&dmac 27 &dmac 28>;
dma-names = "tx", "rx";
num-cs = <3>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};

19
arch/arm/mach-u300/core.c
View File

@ -19,6 +19,7 @@
#include <linux/dmaengine.h>
#include <linux/amba/bus.h>
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/amba/serial.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
@ -704,6 +705,22 @@ MACHINE_END
#ifdef CONFIG_OF
static struct pl022_ssp_controller spi_plat_data = {
/* If you have several SPI buses this varies, we have only bus 0 */
.bus_id = 0,
/*
* On the APP CPU GPIO 4, 5 and 6 are connected as generic
* chip selects for SPI. (Same on U330, U335 and U365.)
* TODO: make sure the GPIO driver can select these properly
* and do padmuxing accordingly too.
*/
.num_chipselect = 3,
.enable_dma = 1,
.dma_filter = coh901318_filter_id,
.dma_rx_param = (void *) U300_DMA_SPI_RX,
.dma_tx_param = (void *) U300_DMA_SPI_TX,
};
/* These are mostly to get the right device names for the clock lookups */
static struct of_dev_auxdata u300_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("stericsson,pinctrl-u300", U300_SYSCON_BASE,
@ -720,6 +737,8 @@ static struct of_dev_auxdata u300_auxdata_lookup[] __initdata = {
"uart0", &uart0_plat_data),
OF_DEV_AUXDATA("arm,primecell", U300_UART1_BASE,
"uart1", &uart1_plat_data),
OF_DEV_AUXDATA("arm,primecell", U300_SPI_BASE,
"pl022", &spi_plat_data),
OF_DEV_AUXDATA("st,ddci2c", U300_I2C0_BASE,
"stu300.0", NULL),
OF_DEV_AUXDATA("st,ddci2c", U300_I2C1_BASE,