renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 05:34:00 +08:00
Code

mmc: sdhci-st: Add sdhci_st_set_uhs_signaling function.

Browse Source 
To allow UHS modes to work properly we need to provide the st specific
set_uhs_signaling callback function. This function differs from the
generic sdhci_set_uhs_signaling callback in that we need to configure
the correct delay depending on the UHS mode, and also set the V18_EN
bit.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Peter Griffin 2015-04-10 10:40:27 +01:00 committed by Ulf Hansson
parent 2053812f6e
commit cf48d32efb
1 changed files with 51 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

51
drivers/mmc/host/sdhci-st.c
View File

@ -261,6 +261,56 @@ static int sdhci_st_set_dll_for_clock(struct sdhci_host *host)
return ret;
}
static void sdhci_st_set_uhs_signaling(struct sdhci_host *host,
unsigned int uhs)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct st_mmc_platform_data *pdata = pltfm_host->priv;
u16 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
int ret = 0;
/* Select Bus Speed Mode for host */
ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
switch (uhs) {
/*
* Set V18_EN -- UHS modes do not work without this.
* does not change signaling voltage
*/
case MMC_TIMING_UHS_SDR12:
st_mmcss_set_static_delay(pdata->top_ioaddr);
ctrl_2 |= SDHCI_CTRL_UHS_SDR12 | SDHCI_CTRL_VDD_180;
break;
case MMC_TIMING_UHS_SDR25:
st_mmcss_set_static_delay(pdata->top_ioaddr);
ctrl_2 |= SDHCI_CTRL_UHS_SDR25 | SDHCI_CTRL_VDD_180;
break;
case MMC_TIMING_UHS_SDR50:
st_mmcss_set_static_delay(pdata->top_ioaddr);
ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180;
ret = sdhci_st_set_dll_for_clock(host);
break;
case MMC_TIMING_UHS_SDR104:
case MMC_TIMING_MMC_HS200:
st_mmcss_set_static_delay(pdata->top_ioaddr);
ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
ret = sdhci_st_set_dll_for_clock(host);
break;
case MMC_TIMING_UHS_DDR50:
case MMC_TIMING_MMC_DDR52:
st_mmcss_set_static_delay(pdata->top_ioaddr);
ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
break;
}
if (ret)
dev_warn(mmc_dev(host->mmc), "Error setting dll for clock "
"(uhs %d)\n", uhs);
dev_dbg(mmc_dev(host->mmc), "uhs %d, ctrl_2 %04X\n", uhs, ctrl_2);
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
}
static u32 sdhci_st_readl(struct sdhci_host *host, int reg)
{
@ -284,6 +334,7 @@ static const struct sdhci_ops sdhci_st_ops = {
.set_bus_width = sdhci_set_bus_width,
.read_l = sdhci_st_readl,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_st_set_uhs_signaling,
};
static const struct sdhci_pltfm_data sdhci_st_pdata = {