renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2025-01-04 11:43:54 +08:00
Code

ARM: tegra: add USB DT entries for Tegra30

Browse Source 
Add device tree entries for the 3 USB controllers and PHYs and
enable the third controller on Cardhu and Beaver boards.

Fix VBUS regulator entries on Beaver. The GPIO pins were wrong.
Also, internal pullups need to be enabled on those pins.

Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
This commit is contained in:
Tuomas Tynkkynen 2013-08-01 18:00:17 +03:00 committed by Stephen Warren
parent d7283c11f7
commit cc34c9f79c
3 changed files with 115 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
arch/arm/boot/dts/tegra30-beaver.dts
View File

@ -110,6 +110,11 @@
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
pex_l1_prsnt_n_pdd4 {
nvidia,pins = "pex_l1_prsnt_n_pdd4",
"pex_l1_clkreq_n_pdd6";
nvidia,pull = <2>;
};
sdio3 {
nvidia,pins = "drive_sdio3";
nvidia,high-speed-mode = <0>;
@ -119,6 +124,10 @@
nvidia,slew-rate-rising = <1>;
nvidia,slew-rate-falling = <1>;
};
gpv {
nvidia,pins = "drive_gpv";
nvidia,pull-up-strength = <16>;
};
};
};
@ -319,6 +328,15 @@
non-removable;
};
usb@7d008000 {
status = "okay";
};
usb-phy@7d008000 {
vbus-supply = <&usb3_vbus_reg>;
status = "okay";
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
@ -391,7 +409,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v_in_reg>;
};
@ -403,7 +421,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v_in_reg>;
};

9
arch/arm/boot/dts/tegra30-cardhu.dtsi
View File

@ -357,6 +357,15 @@
non-removable;
};
usb@7d008000 {
status = "okay";
};
usb-phy@7d008000 {
vbus-supply = <&usb3_vbus_reg>;
status = "okay";
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;

86
arch/arm/boot/dts/tegra30.dtsi
View File

@ -631,6 +631,92 @@
status = "disabled";
};
usb@7d000000 {
compatible = "nvidia,tegra30-ehci", "usb-ehci";
reg = <0x7d000000 0x4000>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USBD>;
nvidia,needs-double-reset;
nvidia,phy = <&phy1>;
status = "disabled";
};
phy1: usb-phy@7d000000 {
compatible = "nvidia,tegra30-usb-phy";
reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USBD>,
<&tegra_car TEGRA30_CLK_PLL_U>,
<&tegra_car TEGRA30_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
nvidia,hssync-start-delay = <9>;
nvidia,idle-wait-delay = <17>;
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <51>;
nvidia.xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <1>;
nvidia,xcvr-lsrslew = <1>;
nvidia,xcvr-hsslew = <32>;
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
status = "disabled";
};
usb@7d004000 {
compatible = "nvidia,tegra30-ehci", "usb-ehci";
reg = <0x7d004000 0x4000>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "ulpi";
clocks = <&tegra_car TEGRA30_CLK_USB2>;
nvidia,phy = <&phy2>;
status = "disabled";
};
phy2: usb-phy@7d004000 {
compatible = "nvidia,tegra30-usb-phy";
reg = <0x7d004000 0x4000>;
phy_type = "ulpi";
clocks = <&tegra_car TEGRA30_CLK_USB2>,
<&tegra_car TEGRA30_CLK_PLL_U>,
<&tegra_car TEGRA30_CLK_CDEV2>;
clock-names = "reg", "pll_u", "ulpi-link";
status = "disabled";
};
usb@7d008000 {
compatible = "nvidia,tegra30-ehci", "usb-ehci";
reg = <0x7d008000 0x4000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USB3>;
nvidia,phy = <&phy3>;
status = "disabled";
};
phy3: usb-phy@7d008000 {
compatible = "nvidia,tegra30-usb-phy";
reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USB3>,
<&tegra_car TEGRA30_CLK_PLL_U>,
<&tegra_car TEGRA30_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
nvidia,hssync-start-delay = <0>;
nvidia,idle-wait-delay = <17>;
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <51>;
nvidia.xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
nvidia,xcvr-hsslew = <32>;
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
status = "disabled";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;