From c89c00e2b8f034891d2550df5ba6fae39f3bf563 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 14 May 2018 10:06:26 +0200 Subject: [PATCH] regulator: max77686: Pass descriptor instead of GPIO number Instead of passing a global GPIO number, pass a descriptor looked up from the device tree configuration node. Signed-off-by: Linus Walleij Reviewed-by: Krzysztof Kozlowski Tested-by: Krzysztof Kozlowski Signed-off-by: Mark Brown --- drivers/regulator/max77686-regulator.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/regulator/max77686-regulator.c b/drivers/regulator/max77686-regulator.c index c301f3733475..37f98a8350f0 100644 --- a/drivers/regulator/max77686-regulator.c +++ b/drivers/regulator/max77686-regulator.c @@ -25,8 +25,7 @@ #include #include #include -#include -#include +#include #include #include #include @@ -90,6 +89,7 @@ enum max77686_ramp_rate { }; struct max77686_data { + struct device *dev; DECLARE_BITMAP(gpio_enabled, MAX77686_REGULATORS); /* Array indexed by regulator id */ @@ -269,16 +269,20 @@ static int max77686_of_parse_cb(struct device_node *np, case MAX77686_BUCK8: case MAX77686_BUCK9: case MAX77686_LDO20 ... MAX77686_LDO22: - config->ena_gpio = of_get_named_gpio(np, - "maxim,ena-gpios", 0); - config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH; - config->ena_gpio_initialized = true; + config->ena_gpiod = devm_gpiod_get_from_of_node(max77686->dev, + np, + "maxim,ena", + 0, + GPIOD_OUT_HIGH, + "max77686-regulator"); + if (IS_ERR(config->ena_gpiod)) + config->ena_gpiod = NULL; break; default: return 0; } - if (gpio_is_valid(config->ena_gpio)) { + if (config->ena_gpiod) { set_bit(desc->id, max77686->gpio_enabled); return regmap_update_bits(config->regmap, desc->enable_reg, @@ -521,6 +525,7 @@ static int max77686_pmic_probe(struct platform_device *pdev) if (!max77686) return -ENOMEM; + max77686->dev = &pdev->dev; config.dev = iodev->dev; config.regmap = iodev->regmap; config.driver_data = max77686;