mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-26 22:24:09 +08:00
ASoC: nau8825: Add FLL configuration
snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Ben Zhang
Mark Brown
parent
b3681308cc
commit
c86ba612bd
@ -17,6 +17,7 @@
|
||||
#include <linux/slab.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/acpi.h>
|
||||
#include <linux/math64.h>
|
||||
|
||||
#include <sound/initval.h>
|
||||
#include <sound/tlv.h>
|
||||
@ -29,6 +30,58 @@
|
||||
|
||||
#include "nau8825.h"
|
||||
|
||||
#define NAU_FREF_MAX 13500000
|
||||
#define NAU_FVCO_MAX 100000000
|
||||
#define NAU_FVCO_MIN 90000000
|
||||
|
||||
struct nau8825_fll {
|
||||
int mclk_src;
|
||||
int ratio;
|
||||
int fll_frac;
|
||||
int fll_int;
|
||||
int clk_ref_div;
|
||||
};
|
||||
|
||||
struct nau8825_fll_attr {
|
||||
unsigned int param;
|
||||
unsigned int val;
|
||||
};
|
||||
|
||||
/* scaling for mclk from sysclk_src output */
|
||||
static const struct nau8825_fll_attr mclk_src_scaling[] = {
|
||||
{ 1, 0x0 },
|
||||
{ 2, 0x2 },
|
||||
{ 4, 0x3 },
|
||||
{ 8, 0x4 },
|
||||
{ 16, 0x5 },
|
||||
{ 32, 0x6 },
|
||||
{ 3, 0x7 },
|
||||
{ 6, 0xa },
|
||||
{ 12, 0xb },
|
||||
{ 24, 0xc },
|
||||
{ 48, 0xd },
|
||||
{ 96, 0xe },
|
||||
{ 5, 0xf },
|
||||
};
|
||||
|
||||
/* ratio for input clk freq */
|
||||
static const struct nau8825_fll_attr fll_ratio[] = {
|
||||
{ 512000, 0x01 },
|
||||
{ 256000, 0x02 },
|
||||
{ 128000, 0x04 },
|
||||
{ 64000, 0x08 },
|
||||
{ 32000, 0x10 },
|
||||
{ 8000, 0x20 },
|
||||
{ 4000, 0x40 },
|
||||
};
|
||||
|
||||
static const struct nau8825_fll_attr fll_pre_scalar[] = {
|
||||
{ 1, 0x0 },
|
||||
{ 2, 0x1 },
|
||||
{ 4, 0x2 },
|
||||
{ 8, 0x3 },
|
||||
};
|
||||
|
||||
static const struct reg_default nau8825_reg_defaults[] = {
|
||||
{ NAU8825_REG_ENA_CTRL, 0x00ff },
|
||||
{ NAU8825_REG_CLK_DIVIDER, 0x0050 },
|
||||
@ -808,6 +861,115 @@ static int nau8825_codec_probe(struct snd_soc_codec *codec)
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* nau8825_calc_fll_param - Calculate FLL parameters.
|
||||
* @fll_in: external clock provided to codec.
|
||||
* @fs: sampling rate.
|
||||
* @fll_param: Pointer to structure of FLL parameters.
|
||||
*
|
||||
* Calculate FLL parameters to configure codec.
|
||||
*
|
||||
* Returns 0 for success or negative error code.
|
||||
*/
|
||||
static int nau8825_calc_fll_param(unsigned int fll_in, unsigned int fs,
|
||||
struct nau8825_fll *fll_param)
|
||||
{
|
||||
u64 fvco;
|
||||
unsigned int fref, i;
|
||||
|
||||
/* Ensure the reference clock frequency (FREF) is <= 13.5MHz by dividing
|
||||
* freq_in by 1, 2, 4, or 8 using FLL pre-scalar.
|
||||
* FREF = freq_in / NAU8825_FLL_REF_DIV_MASK
|
||||
*/
|
||||
for (i = 0; i < ARRAY_SIZE(fll_pre_scalar); i++) {
|
||||
fref = fll_in / fll_pre_scalar[i].param;
|
||||
if (fref <= NAU_FREF_MAX)
|
||||
break;
|
||||
}
|
||||
if (i == ARRAY_SIZE(fll_pre_scalar))
|
||||
return -EINVAL;
|
||||
fll_param->clk_ref_div = fll_pre_scalar[i].val;
|
||||
|
||||
/* Choose the FLL ratio based on FREF */
|
||||
for (i = 0; i < ARRAY_SIZE(fll_ratio); i++) {
|
||||
if (fref >= fll_ratio[i].param)
|
||||
break;
|
||||
}
|
||||
if (i == ARRAY_SIZE(fll_ratio))
|
||||
return -EINVAL;
|
||||
fll_param->ratio = fll_ratio[i].val;
|
||||
|
||||
/* Calculate the frequency of DCO (FDCO) given freq_out = 256 * Fs.
|
||||
* FDCO must be within the 90MHz - 100MHz or the FFL cannot be
|
||||
* guaranteed across the full range of operation.
|
||||
* FDCO = freq_out * 2 * mclk_src_scaling
|
||||
*/
|
||||
for (i = 0; i < ARRAY_SIZE(mclk_src_scaling); i++) {
|
||||
fvco = 256 * fs * 2 * mclk_src_scaling[i].param;
|
||||
if (NAU_FVCO_MIN < fvco && fvco < NAU_FVCO_MAX)
|
||||
break;
|
||||
}
|
||||
if (i == ARRAY_SIZE(mclk_src_scaling))
|
||||
return -EINVAL;
|
||||
fll_param->mclk_src = mclk_src_scaling[i].val;
|
||||
|
||||
/* Calculate the FLL 10-bit integer input and the FLL 16-bit fractional
|
||||
* input based on FDCO, FREF and FLL ratio.
|
||||
*/
|
||||
fvco = div_u64(fvco << 16, fref * fll_param->ratio);
|
||||
fll_param->fll_int = (fvco >> 16) & 0x3FF;
|
||||
fll_param->fll_frac = fvco & 0xFFFF;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void nau8825_fll_apply(struct nau8825 *nau8825,
|
||||
struct nau8825_fll *fll_param)
|
||||
{
|
||||
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
|
||||
NAU8825_CLK_MCLK_SRC_MASK, fll_param->mclk_src);
|
||||
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL1,
|
||||
NAU8825_FLL_RATIO_MASK, fll_param->ratio);
|
||||
/* FLL 16-bit fractional input */
|
||||
regmap_write(nau8825->regmap, NAU8825_REG_FLL2, fll_param->fll_frac);
|
||||
/* FLL 10-bit integer input */
|
||||
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL3,
|
||||
NAU8825_FLL_INTEGER_MASK, fll_param->fll_int);
|
||||
/* FLL pre-scaler */
|
||||
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL4,
|
||||
NAU8825_FLL_REF_DIV_MASK, fll_param->clk_ref_div);
|
||||
/* select divided VCO input */
|
||||
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5,
|
||||
NAU8825_FLL_FILTER_SW_MASK, 0x0000);
|
||||
/* FLL sigma delta modulator enable */
|
||||
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6,
|
||||
NAU8825_SDM_EN_MASK, NAU8825_SDM_EN);
|
||||
}
|
||||
|
||||
/* freq_out must be 256*Fs in order to achieve the best performance */
|
||||
static int nau8825_set_pll(struct snd_soc_codec *codec, int pll_id, int source,
|
||||
unsigned int freq_in, unsigned int freq_out)
|
||||
{
|
||||
struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec);
|
||||
struct nau8825_fll fll_param;
|
||||
int ret, fs;
|
||||
|
||||
fs = freq_out / 256;
|
||||
ret = nau8825_calc_fll_param(freq_in, fs, &fll_param);
|
||||
if (ret < 0) {
|
||||
dev_err(codec->dev, "Unsupported input clock %d\n", freq_in);
|
||||
return ret;
|
||||
}
|
||||
dev_dbg(codec->dev, "mclk_src=%x ratio=%x fll_frac=%x fll_int=%x clk_ref_div=%x\n",
|
||||
fll_param.mclk_src, fll_param.ratio, fll_param.fll_frac,
|
||||
fll_param.fll_int, fll_param.clk_ref_div);
|
||||
|
||||
nau8825_fll_apply(nau8825, &fll_param);
|
||||
mdelay(2);
|
||||
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
|
||||
NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id,
|
||||
unsigned int freq)
|
||||
{
|
||||
@ -920,6 +1082,7 @@ static int nau8825_set_bias_level(struct snd_soc_codec *codec,
|
||||
static struct snd_soc_codec_driver nau8825_codec_driver = {
|
||||
.probe = nau8825_codec_probe,
|
||||
.set_sysclk = nau8825_set_sysclk,
|
||||
.set_pll = nau8825_set_pll,
|
||||
.set_bias_level = nau8825_set_bias_level,
|
||||
.suspend_bias_off = true,
|
||||
|
||||
|
||||
@ -101,13 +101,31 @@
|
||||
#define NAU8825_ENABLE_SAR_SFT 1
|
||||
|
||||
/* CLK_DIVIDER (0x3) */
|
||||
#define NAU8825_CLK_SRC_SFT 15
|
||||
#define NAU8825_CLK_SRC_MASK (1 << NAU8825_CLK_SRC_SFT)
|
||||
#define NAU8825_CLK_SRC_VCO (1 << NAU8825_CLK_SRC_SFT)
|
||||
#define NAU8825_CLK_SRC_MCLK (0 << NAU8825_CLK_SRC_SFT)
|
||||
#define NAU8825_CLK_SRC_SFT 15
|
||||
#define NAU8825_CLK_SRC_MASK (1 << NAU8825_CLK_SRC_SFT)
|
||||
#define NAU8825_CLK_SRC_VCO (1 << NAU8825_CLK_SRC_SFT)
|
||||
#define NAU8825_CLK_SRC_MCLK (0 << NAU8825_CLK_SRC_SFT)
|
||||
#define NAU8825_CLK_MCLK_SRC_MASK (0xf << 0)
|
||||
|
||||
/* FLL1 (0x04) */
|
||||
#define NAU8825_FLL_RATIO_MASK (0x7f << 0)
|
||||
|
||||
/* FLL3 (0x06) */
|
||||
#define NAU8825_FLL_INTEGER_MASK (0x3ff << 0)
|
||||
|
||||
/* FLL4 (0x07) */
|
||||
#define NAU8825_FLL_REF_DIV_MASK (0x3 << 10)
|
||||
|
||||
/* FLL5 (0x08) */
|
||||
#define NAU8825_FLL_FILTER_SW_MASK (0x1 << 14)
|
||||
|
||||
/* FLL6 (0x9) */
|
||||
#define NAU8825_DCO_EN (1 << 15)
|
||||
#define NAU8825_DCO_EN_MASK (0x1 << 15)
|
||||
#define NAU8825_DCO_EN (0x1 << 15)
|
||||
#define NAU8825_DCO_DIS (0x0 << 15)
|
||||
#define NAU8825_SDM_EN_MASK (0x1 << 14)
|
||||
#define NAU8825_SDM_EN (0x1 << 14)
|
||||
#define NAU8825_SDM_DIS (0x0 << 14)
|
||||
|
||||
/* HSD_CTRL (0xc) */
|
||||
#define NAU8825_HSD_AUTO_MODE (1 << 6)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user