dt-bindings: clocks: Convert Allwinner A80 USB clocks to a schema

The Allwinner A80 SoC has a USB clocks controller that is supported in
Linux, with a matching Device Tree binding.

Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.

Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml

@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB Clock Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-usb-clocks
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: High Frequency Oscillator
+
+  clock-names:
+    items:
+      - const: bus
+      - const: hosc
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun9i-a80-ccu.h>
+
+    usb_clocks: clock@a08000 {
+        compatible = "allwinner,sun9i-a80-usb-clks";
+        reg = <0x00a08000 0x8>;
+        clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+        clock-names = "bus", "hosc";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...

Documentation/devicetree/bindings/clock/sun9i-usb.txt

@@ -1,24 +0,0 @@
-Allwinner A80 USB Clock Control Binding
----------------------------------------
-
-Required properties :
-- compatible: must contain one of the following compatibles:
-		- "allwinner,sun9i-a80-usb-clocks"
-
-- reg: Must contain the registers base address and length
-- clocks: phandle to the clocks feeding the USB subsystem. Two are needed:
-  - "bus": the bus clock for the whole USB subsystem
-  - "hosc": the high frequency oscillator (usually at 24MHz)
-- clock-names: Must contain the clock names described just above
-- #clock-cells : must contain 1
-- #reset-cells : must contain 1
-
-Example:
-usb_clocks: clock@a08000 {
-	compatible = "allwinner,sun9i-a80-usb-clks";
-	reg = <0x00a08000 0x8>;
-	clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
-	clock-names = "bus", "hosc";
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};