2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 19:53:59 +08:00

ARM: proc-v7: sanitise and document registers around errata

Document that r13 is not a stack in the initialisation function, in
case anyone gets other ideas.

Document the registers available for the errata workarounds, and
specifically which registers contain parts of the MIDR register, as
well as which registers must be preserved.

Lastly, use the lowest numbered available register (r0) rather than
r10 for temporary storage.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Russell King 2015-04-04 21:46:35 +01:00
parent 4419496884
commit c76f238e26

View File

@ -252,7 +252,7 @@ ENDPROC(cpu_pj4b_do_resume)
* Initialise TLB, Caches, and MMU state ready to switch the MMU
* on. Return in r0 the new CP15 C1 control register setting.
*
* r1, r2, r4, r5, r9 must be preserved.
* r1, r2, r4, r5, r9, r13 must be preserved - r13 is not a stack
* r4: TTBR0 (low word)
* r5: TTBR0 (high word if LPAE)
* r8: TTBR1
@ -285,57 +285,65 @@ __v7_ca17mp_setup:
#endif
b __v7_setup
/*
* Errata:
* r0, r10 available for use
* r1, r2, r4, r5, r9, r13: must be preserved
* r3: contains MIDR rX number in bits 23-20
* r6: contains MIDR rXpY as 8-bit XY number
* r9: MIDR
*/
__ca8_errata:
#if defined(CONFIG_ARM_ERRATA_430973) && !defined(CONFIG_ARCH_MULTIPLATFORM)
teq r3, #0x00100000 @ only present in r1p*
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
orreq r10, r10, #(1 << 6) @ set IBE to 1
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
mrceq p15, 0, r0, c1, c0, 1 @ read aux control register
orreq r0, r0, #(1 << 6) @ set IBE to 1
mcreq p15, 0, r0, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_458693
teq r6, #0x20 @ only present in r2p0
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
orreq r10, r10, #(1 << 5) @ set L1NEON to 1
orreq r10, r10, #(1 << 9) @ set PLDNOP to 1
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
mrceq p15, 0, r0, c1, c0, 1 @ read aux control register
orreq r0, r0, #(1 << 5) @ set L1NEON to 1
orreq r0, r0, #(1 << 9) @ set PLDNOP to 1
mcreq p15, 0, r0, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_460075
teq r6, #0x20 @ only present in r2p0
mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
tsteq r10, #1 << 22
orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit
mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
mrceq p15, 1, r0, c9, c0, 2 @ read L2 cache aux ctrl register
tsteq r0, #1 << 22
orreq r0, r0, #(1 << 22) @ set the Write Allocate disable bit
mcreq p15, 1, r0, c9, c0, 2 @ write the L2 cache aux ctrl register
#endif
b __errata_finish
__ca9_errata:
#ifdef CONFIG_ARM_ERRATA_742230
cmp r6, #0x22 @ only present up to r2p2
mrcle p15, 0, r10, c15, c0, 1 @ read diagnostic register
orrle r10, r10, #1 << 4 @ set bit #4
mcrle p15, 0, r10, c15, c0, 1 @ write diagnostic register
mrcle p15, 0, r0, c15, c0, 1 @ read diagnostic register
orrle r0, r0, #1 << 4 @ set bit #4
mcrle p15, 0, r0, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_742231
teq r6, #0x20 @ present in r2p0
teqne r6, #0x21 @ present in r2p1
teqne r6, #0x22 @ present in r2p2
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 12 @ set bit #12
orreq r10, r10, #1 << 22 @ set bit #22
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
mrceq p15, 0, r0, c15, c0, 1 @ read diagnostic register
orreq r0, r0, #1 << 12 @ set bit #12
orreq r0, r0, #1 << 22 @ set bit #22
mcreq p15, 0, r0, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_743622
teq r3, #0x00200000 @ only present in r2p*
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 6 @ set bit #6
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
mrceq p15, 0, r0, c15, c0, 1 @ read diagnostic register
orreq r0, r0, #1 << 6 @ set bit #6
mcreq p15, 0, r0, c15, c0, 1 @ write diagnostic register
#endif
#if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP)
ALT_SMP(cmp r6, #0x30) @ present prior to r3p0
ALT_UP_B(1f)
mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register
orrlt r10, r10, #1 << 11 @ set bit #11
mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register
mrclt p15, 0, r0, c15, c0, 1 @ read diagnostic register
orrlt r0, r0, #1 << 11 @ set bit #11
mcrlt p15, 0, r0, c15, c0, 1 @ write diagnostic register
1:
#endif
b __errata_finish
@ -343,9 +351,9 @@ __ca9_errata:
__ca15_errata:
#ifdef CONFIG_ARM_ERRATA_773022
cmp r6, #0x4 @ only present up to r0p4
mrcle p15, 0, r10, c1, c0, 1 @ read aux control register
orrle r10, r10, #1 << 1 @ disable loop buffer
mcrle p15, 0, r10, c1, c0, 1 @ write aux control register
mrcle p15, 0, r0, c1, c0, 1 @ read aux control register
orrle r0, r0, #1 << 1 @ disable loop buffer
mcrle p15, 0, r0, c1, c0, 1 @ write aux control register
#endif
b __errata_finish
@ -409,8 +417,8 @@ __v7_setup:
bl v7_flush_dcache_louis
ldmia r12, {r0-r5, r7, r9, r11, lr}
and r10, r9, #0xff000000 @ ARM?
teq r10, #0x41000000
and r0, r9, #0xff000000 @ ARM?
teq r0, #0x41000000
bne __errata_finish
and r3, r9, #0x00f00000 @ variant
and r6, r9, #0x0000000f @ revision