2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-18 02:04:05 +08:00

Merge 4.3-rc4 into char-misc-next

This is needed due to the duplicated iommu stuff to help with the merge
and to prevent future issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Greg Kroah-Hartman 2015-10-06 15:01:52 +01:00
commit c39b7eef7d
285 changed files with 2457 additions and 1583 deletions

View File

@ -43,7 +43,7 @@ o udev 081 # udevd --version
o grub 0.93 # grub --version || grub-install --version
o mcelog 0.6 # mcelog --version
o iptables 1.4.2 # iptables -V
o openssl & libcrypto 1.0.1k # openssl version
o openssl & libcrypto 1.0.0 # openssl version
Kernel compilation

View File

@ -25,7 +25,7 @@ Example:
/* Cypress Gen3 touchpad */
touchpad@67 {
compatible = "cypress,cyapa";
reg = <0x24>;
reg = <0x67>;
interrupt-parent = <&gpio>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
wakeup-source;

View File

@ -4,8 +4,8 @@ The MISC interrupt controller is a secondary controller for lower priority
interrupt.
Required Properties:
- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc"
as fallback
- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc" or
"qca,<soctype>-cpu-intc", "qca,ar7240-misc-intc"
- reg: Base address and size of the controllers memory area
- interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
@ -13,6 +13,9 @@ Required Properties:
- #interrupt-cells : Specifies the number of cells needed to encode interrupt
source, should be 1
Compatible fallback depends on the SoC. Use ar7100 for ar71xx and ar913x,
use ar7240 for all other SoCs.
Please refer to interrupts.txt in this directory for details of the common
Interrupt Controllers bindings used by client devices.
@ -28,3 +31,16 @@ Example:
interrupt-controller;
#interrupt-cells = <1>;
};
Another example:
interrupt-controller@18060010 {
compatible = "qca,ar9331-misc-intc", qca,ar7240-misc-intc";
reg = <0x18060010 0x4>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
interrupt-controller;
#interrupt-cells = <1>;
};

View File

@ -361,7 +361,7 @@ For win8 devices with both T and C coordinates, the position mapping is
ABS_MT_POSITION_X := T_X
ABS_MT_POSITION_Y := T_Y
ABS_MT_TOOL_X := C_X
ABS_MT_TOOL_X := C_Y
ABS_MT_TOOL_Y := C_Y
Unfortunately, there is not enough information to specify both the touching
ellipse and the tool ellipse, so one has to resort to approximations. One

View File

@ -979,20 +979,45 @@ every time right after the runtime_resume() callback has returned
(alternatively, the runtime_suspend() callback will have to check if the
device should really be suspended and return -EAGAIN if that is not the case).
The runtime PM of PCI devices is disabled by default. It is also blocked by
pci_pm_init() that runs the pm_runtime_forbid() helper function. If a PCI
driver implements the runtime PM callbacks and intends to use the runtime PM
framework provided by the PM core and the PCI subsystem, it should enable this
feature by executing the pm_runtime_enable() helper function. However, the
driver should not call the pm_runtime_allow() helper function unblocking
the runtime PM of the device. Instead, it should allow user space or some
platform-specific code to do that (user space can do it via sysfs), although
once it has called pm_runtime_enable(), it must be prepared to handle the
The runtime PM of PCI devices is enabled by default by the PCI core. PCI
device drivers do not need to enable it and should not attempt to do so.
However, it is blocked by pci_pm_init() that runs the pm_runtime_forbid()
helper function. In addition to that, the runtime PM usage counter of
each PCI device is incremented by local_pci_probe() before executing the
probe callback provided by the device's driver.
If a PCI driver implements the runtime PM callbacks and intends to use the
runtime PM framework provided by the PM core and the PCI subsystem, it needs
to decrement the device's runtime PM usage counter in its probe callback
function. If it doesn't do that, the counter will always be different from
zero for the device and it will never be runtime-suspended. The simplest
way to do that is by calling pm_runtime_put_noidle(), but if the driver
wants to schedule an autosuspend right away, for example, it may call
pm_runtime_put_autosuspend() instead for this purpose. Generally, it
just needs to call a function that decrements the devices usage counter
from its probe routine to make runtime PM work for the device.
It is important to remember that the driver's runtime_suspend() callback
may be executed right after the usage counter has been decremented, because
user space may already have cuased the pm_runtime_allow() helper function
unblocking the runtime PM of the device to run via sysfs, so the driver must
be prepared to cope with that.
The driver itself should not call pm_runtime_allow(), though. Instead, it
should let user space or some platform-specific code do that (user space can
do it via sysfs as stated above), but it must be prepared to handle the
runtime PM of the device correctly as soon as pm_runtime_allow() is called
(which may happen at any time). [It also is possible that user space causes
pm_runtime_allow() to be called via sysfs before the driver is loaded, so in
fact the driver has to be prepared to handle the runtime PM of the device as
soon as it calls pm_runtime_enable().]
(which may happen at any time, even before the driver is loaded).
When the driver's remove callback runs, it has to balance the decrementation
of the device's runtime PM usage counter at the probe time. For this reason,
if it has decremented the counter in its probe callback, it must run
pm_runtime_get_noresume() in its remove callback. [Since the core carries
out a runtime resume of the device and bumps up the device's usage counter
before running the driver's remove callback, the runtime PM of the device
is effectively disabled for the duration of the remove execution and all
runtime PM helper functions incrementing the device's usage counter are
then effectively equivalent to pm_runtime_get_noresume().]
The runtime PM framework works by processing requests to suspend or resume
devices, or to check if they are idle (in which cases it is reasonable to

View File

@ -18,6 +18,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define _GNU_SOURCE
#define __SANE_USERSPACE_TYPES__ /* For PPC64, to get LL64 types */
#include <errno.h>
#include <fcntl.h>
#include <inttypes.h>

View File

@ -5963,7 +5963,7 @@ F: virt/kvm/
KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V
M: Joerg Roedel <joro@8bytes.org>
L: kvm@vger.kernel.org
W: http://kvm.qumranet.com
W: http://www.linux-kvm.org/
S: Maintained
F: arch/x86/include/asm/svm.h
F: arch/x86/kvm/svm.c
@ -5971,7 +5971,7 @@ F: arch/x86/kvm/svm.c
KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
M: Alexander Graf <agraf@suse.com>
L: kvm-ppc@vger.kernel.org
W: http://kvm.qumranet.com
W: http://www.linux-kvm.org/
T: git git://github.com/agraf/linux-2.6.git
S: Supported
F: arch/powerpc/include/asm/kvm*

View File

@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 3
SUBLEVEL = 0
EXTRAVERSION = -rc3
EXTRAVERSION = -rc4
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*

View File

@ -48,4 +48,5 @@ generic-y += types.h
generic-y += ucontext.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

View File

@ -79,7 +79,7 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
#define PAGE_S2 __pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_NORMAL) | PTE_S2_RDONLY)
#define PAGE_S2_DEVICE __pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_DEVICE_nGnRE) | PTE_S2_RDONLY | PTE_UXN)
#define PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_TYPE_MASK) | PTE_PROT_NONE | PTE_PXN | PTE_UXN)
#define PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_VALID) | PTE_PROT_NONE | PTE_PXN | PTE_UXN)
#define PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE)
#define PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_WRITE)
#define PAGE_COPY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
@ -496,7 +496,7 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long addr)
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY |
PTE_PROT_NONE | PTE_WRITE | PTE_TYPE_MASK;
PTE_PROT_NONE | PTE_VALID | PTE_WRITE;
/* preserve the hardware dirty information */
if (pte_hw_dirty(pte))
pte = pte_mkdirty(pte);

View File

@ -258,7 +258,8 @@ static bool __init efi_virtmap_init(void)
*/
if (!is_normal_ram(md))
prot = __pgprot(PROT_DEVICE_nGnRE);
else if (md->type == EFI_RUNTIME_SERVICES_CODE)
else if (md->type == EFI_RUNTIME_SERVICES_CODE ||
!PAGE_ALIGNED(md->phys_addr))
prot = PAGE_KERNEL_EXEC;
else
prot = PAGE_KERNEL;

View File

@ -178,6 +178,24 @@ ENTRY(ftrace_stub)
ENDPROC(ftrace_stub)
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/* save return value regs*/
.macro save_return_regs
sub sp, sp, #64
stp x0, x1, [sp]
stp x2, x3, [sp, #16]
stp x4, x5, [sp, #32]
stp x6, x7, [sp, #48]
.endm
/* restore return value regs*/
.macro restore_return_regs
ldp x0, x1, [sp]
ldp x2, x3, [sp, #16]
ldp x4, x5, [sp, #32]
ldp x6, x7, [sp, #48]
add sp, sp, #64
.endm
/*
* void ftrace_graph_caller(void)
*
@ -204,11 +222,11 @@ ENDPROC(ftrace_graph_caller)
* only when CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST is enabled.
*/
ENTRY(return_to_handler)
str x0, [sp, #-16]!
save_return_regs
mov x0, x29 // parent's fp
bl ftrace_return_to_handler// addr = ftrace_return_to_hander(fp);
mov x30, x0 // restore the original return address
ldr x0, [sp], #16
restore_return_regs
ret
END(return_to_handler)
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */

View File

@ -20,4 +20,5 @@ generic-y += sections.h
generic-y += topology.h
generic-y += trace_clock.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

View File

@ -46,4 +46,5 @@ generic-y += types.h
generic-y += ucontext.h
generic-y += unaligned.h
generic-y += user.h
generic-y += word-at-a-time.h
generic-y += xor.h

View File

@ -59,4 +59,5 @@ generic-y += types.h
generic-y += ucontext.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

View File

@ -43,4 +43,5 @@ generic-y += topology.h
generic-y += trace_clock.h
generic-y += types.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

View File

@ -7,3 +7,4 @@ generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h

View File

@ -58,4 +58,5 @@ generic-y += types.h
generic-y += ucontext.h
generic-y += unaligned.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

View File

@ -8,3 +8,4 @@ generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += trace_clock.h
generic-y += vtime.h
generic-y += word-at-a-time.h

View File

@ -9,3 +9,4 @@ generic-y += module.h
generic-y += preempt.h
generic-y += sections.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h

View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -57,7 +58,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -67,10 +67,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -179,6 +181,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -206,6 +209,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -271,6 +275,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -370,6 +375,7 @@ CONFIG_ZORRO8390=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -537,6 +543,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -55,7 +56,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -65,10 +65,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -177,6 +179,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -204,6 +207,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -269,6 +273,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -344,6 +349,7 @@ CONFIG_VETH=m
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -495,6 +501,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -55,7 +56,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -65,10 +65,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -177,6 +179,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -204,6 +207,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -269,6 +273,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -355,6 +360,7 @@ CONFIG_NE2000=y
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMC91X=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -517,6 +523,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -53,7 +54,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -63,10 +63,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -175,6 +177,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -202,6 +205,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -267,6 +271,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -343,6 +348,7 @@ CONFIG_BVME6000_NET=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -488,6 +494,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -55,7 +56,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -65,10 +65,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -177,6 +179,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -204,6 +207,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -269,6 +273,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -345,6 +350,7 @@ CONFIG_HPLANCE=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -497,6 +503,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -54,7 +55,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -64,10 +64,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -176,6 +178,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -203,6 +206,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -271,6 +275,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -364,6 +369,7 @@ CONFIG_MAC8390=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -519,6 +525,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -64,7 +65,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -74,10 +74,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -186,6 +188,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -213,6 +216,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -281,6 +285,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -410,6 +415,7 @@ CONFIG_ZORRO8390=y
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMC91X=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PLIP=m
@ -599,6 +605,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -52,7 +53,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -62,10 +62,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -174,6 +176,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -201,6 +204,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -266,6 +270,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -343,6 +348,7 @@ CONFIG_MVME147_NET=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -488,6 +494,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -53,7 +54,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -63,10 +63,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -175,6 +177,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -202,6 +205,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -267,6 +271,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -343,6 +348,7 @@ CONFIG_MVME16x_NET=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -488,6 +494,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -53,7 +54,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -63,10 +63,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -175,6 +177,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -202,6 +205,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -267,6 +271,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -354,6 +359,7 @@ CONFIG_NE2000=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PLIP=m
@ -510,6 +516,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -50,7 +51,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -60,10 +60,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -172,6 +174,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -199,6 +202,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -264,6 +268,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -341,6 +346,7 @@ CONFIG_SUN3_82586=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -489,6 +495,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y

View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -50,7 +51,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -60,10 +60,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -172,6 +174,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -199,6 +202,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -264,6 +268,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -341,6 +346,7 @@ CONFIG_SUN3LANCE=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -489,6 +495,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

View File

@ -4,4 +4,34 @@
#define __ALIGN .align 4
#define __ALIGN_STR ".align 4"
/*
* Make sure the compiler doesn't do anything stupid with the
* arguments on the stack - they are owned by the *caller*, not
* the callee. This just fools gcc into not spilling into them,
* and keeps it from doing tailcall recursion and/or using the
* stack slots for temporaries, since they are live and "used"
* all the way to the end of the function.
*/
#define asmlinkage_protect(n, ret, args...) \
__asmlinkage_protect##n(ret, ##args)
#define __asmlinkage_protect_n(ret, args...) \
__asm__ __volatile__ ("" : "=r" (ret) : "0" (ret), ##args)
#define __asmlinkage_protect0(ret) \
__asmlinkage_protect_n(ret)
#define __asmlinkage_protect1(ret, arg1) \
__asmlinkage_protect_n(ret, "m" (arg1))
#define __asmlinkage_protect2(ret, arg1, arg2) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2))
#define __asmlinkage_protect3(ret, arg1, arg2, arg3) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3))
#define __asmlinkage_protect4(ret, arg1, arg2, arg3, arg4) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
"m" (arg4))
#define __asmlinkage_protect5(ret, arg1, arg2, arg3, arg4, arg5) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
"m" (arg4), "m" (arg5))
#define __asmlinkage_protect6(ret, arg1, arg2, arg3, arg4, arg5, arg6) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
"m" (arg4), "m" (arg5), "m" (arg6))
#endif

View File

@ -4,7 +4,7 @@
#include <uapi/asm/unistd.h>
#define NR_syscalls 356
#define NR_syscalls 375
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT

View File

@ -361,5 +361,24 @@
#define __NR_memfd_create 353
#define __NR_bpf 354
#define __NR_execveat 355
#define __NR_socket 356
#define __NR_socketpair 357
#define __NR_bind 358
#define __NR_connect 359
#define __NR_listen 360
#define __NR_accept4 361
#define __NR_getsockopt 362
#define __NR_setsockopt 363
#define __NR_getsockname 364
#define __NR_getpeername 365
#define __NR_sendto 366
#define __NR_sendmsg 367
#define __NR_recvfrom 368
#define __NR_recvmsg 369
#define __NR_shutdown 370
#define __NR_recvmmsg 371
#define __NR_sendmmsg 372
#define __NR_userfaultfd 373
#define __NR_membarrier 374
#endif /* _UAPI_ASM_M68K_UNISTD_H_ */

View File

@ -376,4 +376,22 @@ ENTRY(sys_call_table)
.long sys_memfd_create
.long sys_bpf
.long sys_execveat /* 355 */
.long sys_socket
.long sys_socketpair
.long sys_bind
.long sys_connect
.long sys_listen /* 360 */
.long sys_accept4
.long sys_getsockopt
.long sys_setsockopt
.long sys_getsockname
.long sys_getpeername /* 365 */
.long sys_sendto
.long sys_sendmsg
.long sys_recvfrom
.long sys_recvmsg
.long sys_shutdown /* 370 */
.long sys_recvmmsg
.long sys_sendmmsg
.long sys_userfaultfd
.long sys_membarrier

View File

@ -54,4 +54,5 @@ generic-y += ucontext.h
generic-y += unaligned.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

View File

@ -10,3 +10,4 @@ generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += syscalls.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h

View File

@ -293,8 +293,26 @@ static int __init ath79_misc_intc_of_init(
return 0;
}
IRQCHIP_DECLARE(ath79_misc_intc, "qca,ar7100-misc-intc",
ath79_misc_intc_of_init);
static int __init ar7100_misc_intc_of_init(
struct device_node *node, struct device_node *parent)
{
ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
return ath79_misc_intc_of_init(node, parent);
}
IRQCHIP_DECLARE(ar7100_misc_intc, "qca,ar7100-misc-intc",
ar7100_misc_intc_of_init);
static int __init ar7240_misc_intc_of_init(
struct device_node *node, struct device_node *parent)
{
ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
return ath79_misc_intc_of_init(node, parent);
}
IRQCHIP_DECLARE(ar7240_misc_intc, "qca,ar7240-misc-intc",
ar7240_misc_intc_of_init);
static int __init ar79_cpu_intc_of_init(
struct device_node *node, struct device_node *parent)

View File

@ -933,7 +933,7 @@ void __init plat_mem_setup(void)
while ((boot_mem_map.nr_map < BOOT_MEM_MAP_MAX)
&& (total < MAX_MEMORY)) {
memory = cvmx_bootmem_phy_alloc(mem_alloc_size,
__pa_symbol(&__init_end), -1,
__pa_symbol(&_end), -1,
0x100000,
CVMX_BOOTMEM_FLAG_NO_LOCKING);
if (memory >= 0) {

View File

@ -17,4 +17,5 @@ generic-y += segment.h
generic-y += serial.h
generic-y += trace_clock.h
generic-y += user.h
generic-y += word-at-a-time.h
generic-y += xor.h

View File

@ -20,6 +20,9 @@
#ifndef cpu_has_tlb
#define cpu_has_tlb (cpu_data[0].options & MIPS_CPU_TLB)
#endif
#ifndef cpu_has_ftlb
#define cpu_has_ftlb (cpu_data[0].options & MIPS_CPU_FTLB)
#endif
#ifndef cpu_has_tlbinv
#define cpu_has_tlbinv (cpu_data[0].options & MIPS_CPU_TLBINV)
#endif

View File

@ -385,6 +385,7 @@ enum cpu_type_enum {
#define MIPS_CPU_CDMM 0x4000000000ull /* CPU has Common Device Memory Map */
#define MIPS_CPU_BP_GHIST 0x8000000000ull /* R12K+ Branch Prediction Global History */
#define MIPS_CPU_SP 0x10000000000ull /* Small (1KB) page support */
#define MIPS_CPU_FTLB 0x20000000000ull /* CPU has Fixed-page-size TLB */
/*
* CPU ASE encodings

View File

@ -65,6 +65,15 @@ static inline void write_maar_pair(unsigned idx, phys_addr_t lower,
back_to_back_c0_hazard();
}
/**
* maar_init() - initialise MAARs
*
* Performs initialisation of MAARs for the current CPU, making use of the
* platforms implementation of platform_maar_init where necessary and
* duplicating the setup it provides on secondary CPUs.
*/
extern void maar_init(void);
/**
* struct maar_config - MAAR configuration data
* @lower: The lowest address that the MAAR pair will affect. Must be

View File

@ -194,6 +194,7 @@ BUILD_CM_RW(reg3_mask, MIPS_CM_GCB_OFS + 0xc8)
BUILD_CM_R_(gic_status, MIPS_CM_GCB_OFS + 0xd0)
BUILD_CM_R_(cpc_status, MIPS_CM_GCB_OFS + 0xf0)
BUILD_CM_RW(l2_config, MIPS_CM_GCB_OFS + 0x130)
BUILD_CM_RW(sys_config2, MIPS_CM_GCB_OFS + 0x150)
/* Core Local & Core Other register accessor functions */
BUILD_CM_Cx_RW(reset_release, 0x00)
@ -316,6 +317,10 @@ BUILD_CM_Cx_R_(tcid_8_priority, 0x80)
#define CM_GCR_L2_CONFIG_ASSOC_SHF 0
#define CM_GCR_L2_CONFIG_ASSOC_MSK (_ULCAST_(0xff) << 0)
/* GCR_SYS_CONFIG2 register fields */
#define CM_GCR_SYS_CONFIG2_MAXVPW_SHF 0
#define CM_GCR_SYS_CONFIG2_MAXVPW_MSK (_ULCAST_(0xf) << 0)
/* GCR_Cx_COHERENCE register fields */
#define CM_GCR_Cx_COHERENCE_COHDOMAINEN_SHF 0
#define CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK (_ULCAST_(0xff) << 0)
@ -405,4 +410,38 @@ static inline int mips_cm_revision(void)
return read_gcr_rev();
}
/**
* mips_cm_max_vp_width() - return the width in bits of VP indices
*
* Return: the width, in bits, of VP indices in fields that combine core & VP
* indices.
*/
static inline unsigned int mips_cm_max_vp_width(void)
{
extern int smp_num_siblings;
if (mips_cm_revision() >= CM_REV_CM3)
return read_gcr_sys_config2() & CM_GCR_SYS_CONFIG2_MAXVPW_MSK;
return smp_num_siblings;
}
/**
* mips_cm_vp_id() - calculate the hardware VP ID for a CPU
* @cpu: the CPU whose VP ID to calculate
*
* Hardware such as the GIC uses identifiers for VPs which may not match the
* CPU numbers used by Linux. This function calculates the hardware VP
* identifier corresponding to a given CPU.
*
* Return: the VP ID for the CPU.
*/
static inline unsigned int mips_cm_vp_id(unsigned int cpu)
{
unsigned int core = cpu_data[cpu].core;
unsigned int vp = cpu_vpe_id(&cpu_data[cpu]);
return (core * mips_cm_max_vp_width()) + vp;
}
#endif /* __MIPS_ASM_MIPS_CM_H__ */

View File

@ -487,6 +487,8 @@
/* Bits specific to the MIPS32/64 PRA. */
#define MIPS_CONF_MT (_ULCAST_(7) << 7)
#define MIPS_CONF_MT_TLB (_ULCAST_(1) << 7)
#define MIPS_CONF_MT_FTLB (_ULCAST_(4) << 7)
#define MIPS_CONF_AR (_ULCAST_(7) << 10)
#define MIPS_CONF_AT (_ULCAST_(3) << 13)
#define MIPS_CONF_M (_ULCAST_(1) << 31)

View File

@ -377,16 +377,18 @@
#define __NR_memfd_create (__NR_Linux + 354)
#define __NR_bpf (__NR_Linux + 355)
#define __NR_execveat (__NR_Linux + 356)
#define __NR_userfaultfd (__NR_Linux + 357)
#define __NR_membarrier (__NR_Linux + 358)
/*
* Offset of the last Linux o32 flavoured syscall
*/
#define __NR_Linux_syscalls 356
#define __NR_Linux_syscalls 358
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
#define __NR_O32_Linux_syscalls 356
#define __NR_O32_Linux_syscalls 358
#if _MIPS_SIM == _MIPS_SIM_ABI64
@ -711,16 +713,18 @@
#define __NR_memfd_create (__NR_Linux + 314)
#define __NR_bpf (__NR_Linux + 315)
#define __NR_execveat (__NR_Linux + 316)
#define __NR_userfaultfd (__NR_Linux + 317)
#define __NR_membarrier (__NR_Linux + 318)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
#define __NR_Linux_syscalls 316
#define __NR_Linux_syscalls 318
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
#define __NR_64_Linux_syscalls 316
#define __NR_64_Linux_syscalls 318
#if _MIPS_SIM == _MIPS_SIM_NABI32
@ -1049,15 +1053,17 @@
#define __NR_memfd_create (__NR_Linux + 318)
#define __NR_bpf (__NR_Linux + 319)
#define __NR_execveat (__NR_Linux + 320)
#define __NR_userfaultfd (__NR_Linux + 321)
#define __NR_membarrier (__NR_Linux + 322)
/*
* Offset of the last N32 flavoured syscall
*/
#define __NR_Linux_syscalls 320
#define __NR_Linux_syscalls 322
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
#define __NR_N32_Linux_syscalls 320
#define __NR_N32_Linux_syscalls 322
#endif /* _UAPI_ASM_UNISTD_H */

View File

@ -26,6 +26,7 @@
#include <linux/power/jz4740-battery.h>
#include <linux/power/gpio-charger.h>
#include <asm/mach-jz4740/gpio.h>
#include <asm/mach-jz4740/jz4740_fb.h>
#include <asm/mach-jz4740/jz4740_mmc.h>
#include <asm/mach-jz4740/jz4740_nand.h>

View File

@ -28,6 +28,7 @@
#include <linux/seq_file.h>
#include <asm/mach-jz4740/base.h>
#include <asm/mach-jz4740/gpio.h>
#define JZ4740_GPIO_BASE_A (32*0)
#define JZ4740_GPIO_BASE_B (32*1)

View File

@ -39,6 +39,7 @@
mfc0 \dest, CP0_CONFIG, 3
andi \dest, \dest, MIPS_CONF3_MT
beqz \dest, \nomt
nop
.endm
.section .text.cps-vec
@ -223,10 +224,9 @@ LEAF(excep_ejtag)
END(excep_ejtag)
LEAF(mips_cps_core_init)
#ifdef CONFIG_MIPS_MT
#ifdef CONFIG_MIPS_MT_SMP
/* Check that the core implements the MT ASE */
has_mt t0, 3f
nop
.set push
.set mips64r2
@ -310,8 +310,9 @@ LEAF(mips_cps_boot_vpes)
PTR_ADDU t0, t0, t1
/* Calculate this VPEs ID. If the core doesn't support MT use 0 */
li t9, 0
#ifdef CONFIG_MIPS_MT_SMP
has_mt ta2, 1f
li t9, 0
/* Find the number of VPEs present in the core */
mfc0 t1, CP0_MVPCONF0
@ -330,6 +331,7 @@ LEAF(mips_cps_boot_vpes)
/* Retrieve the VPE ID from EBase.CPUNum */
mfc0 t9, $15, 1
and t9, t9, t1
#endif
1: /* Calculate a pointer to this VPEs struct vpe_boot_config */
li t1, VPEBOOTCFG_SIZE
@ -337,7 +339,7 @@ LEAF(mips_cps_boot_vpes)
PTR_L ta3, COREBOOTCFG_VPECONFIG(t0)
PTR_ADDU v0, v0, ta3
#ifdef CONFIG_MIPS_MT
#ifdef CONFIG_MIPS_MT_SMP
/* If the core doesn't support MT then return */
bnez ta2, 1f
@ -451,7 +453,7 @@ LEAF(mips_cps_boot_vpes)
2: .set pop
#endif /* CONFIG_MIPS_MT */
#endif /* CONFIG_MIPS_MT_SMP */
/* Return */
jr ra

View File

@ -410,16 +410,18 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, int enable)
static inline unsigned int decode_config0(struct cpuinfo_mips *c)
{
unsigned int config0;
int isa;
int isa, mt;
config0 = read_c0_config();
/*
* Look for Standard TLB or Dual VTLB and FTLB
*/
if ((((config0 & MIPS_CONF_MT) >> 7) == 1) ||
(((config0 & MIPS_CONF_MT) >> 7) == 4))
mt = config0 & MIPS_CONF_MT;
if (mt == MIPS_CONF_MT_TLB)
c->options |= MIPS_CPU_TLB;
else if (mt == MIPS_CONF_MT_FTLB)
c->options |= MIPS_CPU_TLB | MIPS_CPU_FTLB;
isa = (config0 & MIPS_CONF_AT) >> 13;
switch (isa) {
@ -559,15 +561,18 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c)
if (cpu_has_tlb) {
if (((config4 & MIPS_CONF4_IE) >> 29) == 2)
c->options |= MIPS_CPU_TLBINV;
/*
* This is a bit ugly. R6 has dropped that field from
* config4 and the only valid configuration is VTLB+FTLB so
* set a good value for mmuextdef for that case.
* R6 has dropped the MMUExtDef field from config4.
* On R6 the fields always describe the FTLB, and only if it is
* present according to Config.MT.
*/
if (cpu_has_mips_r6)
if (!cpu_has_mips_r6)
mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
else if (cpu_has_ftlb)
mmuextdef = MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT;
else
mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
mmuextdef = 0;
switch (mmuextdef) {
case MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT:

View File

@ -18,7 +18,7 @@
.set pop
/*
* task_struct *resume(task_struct *prev, task_struct *next,
* struct thread_info *next_ti, int usedfpu)
* struct thread_info *next_ti)
*/
.align 7
LEAF(resume)
@ -28,30 +28,6 @@
cpu_save_nonscratch a0
LONG_S ra, THREAD_REG31(a0)
/*
* check if we need to save FPU registers
*/
.set push
.set noreorder
beqz a3, 1f
PTR_L t3, TASK_THREAD_INFO(a0)
.set pop
/*
* clear saved user stack CU1 bit
*/
LONG_L t0, ST_OFF(t3)
li t1, ~ST0_CU1
and t0, t0, t1
LONG_S t0, ST_OFF(t3)
.set push
.set arch=mips64r2
fpu_save_double a0 t0 t1 # c0_status passed in t0
# clobbers t1
.set pop
1:
#if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
/* Check if we need to store CVMSEG state */
dmfc0 t0, $11,7 /* CvmMemCtl */

View File

@ -30,19 +30,9 @@
*/
#define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS)
/*
* FPU context is saved iff the process has used it's FPU in the current
* time slice as indicated by TIF_USEDFPU. In any case, the CU1 bit for user
* space STATUS register should be 0, so that a process *always* starts its
* userland with FPU disabled after each context switch.
*
* FPU will be enabled as soon as the process accesses FPU again, through
* do_cpu() trap.
*/
/*
* task_struct *resume(task_struct *prev, task_struct *next,
* struct thread_info *next_ti, int usedfpu)
* struct thread_info *next_ti)
*/
LEAF(resume)
mfc0 t1, CP0_STATUS
@ -50,22 +40,6 @@ LEAF(resume)
cpu_save_nonscratch a0
sw ra, THREAD_REG31(a0)
beqz a3, 1f
PTR_L t3, TASK_THREAD_INFO(a0)
/*
* clear saved user stack CU1 bit
*/
lw t0, ST_OFF(t3)
li t1, ~ST0_CU1
and t0, t0, t1
sw t0, ST_OFF(t3)
fpu_save_single a0, t0 # clobbers t0
1:
#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
PTR_LA t8, __stack_chk_guard
LONG_L t9, TASK_STACK_CANARY(a1)

View File

@ -36,16 +36,8 @@ NESTED(handle_sys, PT_SIZE, sp)
lw t1, PT_EPC(sp) # skip syscall on return
subu v0, v0, __NR_O32_Linux # check syscall number
sltiu t0, v0, __NR_O32_Linux_syscalls + 1
addiu t1, 4 # skip to next instruction
sw t1, PT_EPC(sp)
beqz t0, illegal_syscall
sll t0, v0, 2
la t1, sys_call_table
addu t1, t0
lw t2, (t1) # syscall routine
beqz t2, illegal_syscall
sw a3, PT_R26(sp) # save a3 for syscall restarting
@ -96,6 +88,16 @@ loads_done:
li t1, _TIF_WORK_SYSCALL_ENTRY
and t0, t1
bnez t0, syscall_trace_entry # -> yes
syscall_common:
sltiu t0, v0, __NR_O32_Linux_syscalls + 1
beqz t0, illegal_syscall
sll t0, v0, 2
la t1, sys_call_table
addu t1, t0
lw t2, (t1) # syscall routine
beqz t2, illegal_syscall
jalr t2 # Do The Real Thing (TM)
@ -116,7 +118,7 @@ o32_syscall_exit:
syscall_trace_entry:
SAVE_STATIC
move s0, t2
move s0, v0
move a0, sp
/*
@ -129,27 +131,18 @@ syscall_trace_entry:
1: jal syscall_trace_enter
bltz v0, 2f # seccomp failed? Skip syscall
bltz v0, 1f # seccomp failed? Skip syscall
move v0, s0 # restore syscall
move t0, s0
RESTORE_STATIC
lw a0, PT_R4(sp) # Restore argument registers
lw a1, PT_R5(sp)
lw a2, PT_R6(sp)
lw a3, PT_R7(sp)
jalr t0
j syscall_common
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
sw t0, PT_R7(sp) # set error flag
beqz t0, 1f
lw t1, PT_R2(sp) # syscall number
negu v0 # error
sw t1, PT_R0(sp) # save it for syscall restarting
1: sw v0, PT_R2(sp) # result
2: j syscall_exit
1: j syscall_exit
/* ------------------------------------------------------------------------ */
@ -599,3 +592,5 @@ EXPORT(sys_call_table)
PTR sys_memfd_create
PTR sys_bpf /* 4355 */
PTR sys_execveat
PTR sys_userfaultfd
PTR sys_membarrier

View File

@ -39,18 +39,11 @@ NESTED(handle_sys64, PT_SIZE, sp)
.set at
#endif
dsubu t0, v0, __NR_64_Linux # check syscall number
sltiu t0, t0, __NR_64_Linux_syscalls + 1
#if !defined(CONFIG_MIPS32_O32) && !defined(CONFIG_MIPS32_N32)
ld t1, PT_EPC(sp) # skip syscall on return
daddiu t1, 4 # skip to next instruction
sd t1, PT_EPC(sp)
#endif
beqz t0, illegal_syscall
dsll t0, v0, 3 # offset into table
ld t2, (sys_call_table - (__NR_64_Linux * 8))(t0)
# syscall routine
sd a3, PT_R26(sp) # save a3 for syscall restarting
@ -59,6 +52,17 @@ NESTED(handle_sys64, PT_SIZE, sp)
and t0, t1, t0
bnez t0, syscall_trace_entry
syscall_common:
dsubu t2, v0, __NR_64_Linux
sltiu t0, t2, __NR_64_Linux_syscalls + 1
beqz t0, illegal_syscall
dsll t0, t2, 3 # offset into table
dla t2, sys_call_table
daddu t0, t2, t0
ld t2, (t0) # syscall routine
beqz t2, illegal_syscall
jalr t2 # Do The Real Thing (TM)
li t0, -EMAXERRNO - 1 # error?
@ -78,14 +82,14 @@ n64_syscall_exit:
syscall_trace_entry:
SAVE_STATIC
move s0, t2
move s0, v0
move a0, sp
move a1, v0
jal syscall_trace_enter
bltz v0, 2f # seccomp failed? Skip syscall
bltz v0, 1f # seccomp failed? Skip syscall
move t0, s0
move v0, s0
RESTORE_STATIC
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
@ -93,19 +97,9 @@ syscall_trace_entry:
ld a3, PT_R7(sp)
ld a4, PT_R8(sp)
ld a5, PT_R9(sp)
jalr t0
j syscall_common
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
2: j syscall_exit
1: j syscall_exit
illegal_syscall:
/* This also isn't a 64-bit syscall, throw an error. */
@ -436,4 +430,6 @@ EXPORT(sys_call_table)
PTR sys_memfd_create
PTR sys_bpf /* 5315 */
PTR sys_execveat
PTR sys_userfaultfd
PTR sys_membarrier
.size sys_call_table,.-sys_call_table

View File

@ -52,6 +52,7 @@ NESTED(handle_sysn32, PT_SIZE, sp)
and t0, t1, t0
bnez t0, n32_syscall_trace_entry
syscall_common:
jalr t2 # Do The Real Thing (TM)
li t0, -EMAXERRNO - 1 # error?
@ -75,9 +76,9 @@ n32_syscall_trace_entry:
move a1, v0
jal syscall_trace_enter
bltz v0, 2f # seccomp failed? Skip syscall
bltz v0, 1f # seccomp failed? Skip syscall
move t0, s0
move t2, s0
RESTORE_STATIC
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
@ -85,19 +86,9 @@ n32_syscall_trace_entry:
ld a3, PT_R7(sp)
ld a4, PT_R8(sp)
ld a5, PT_R9(sp)
jalr t0
j syscall_common
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
2: j syscall_exit
1: j syscall_exit
not_n32_scall:
/* This is not an n32 compatibility syscall, pass it on to
@ -429,4 +420,6 @@ EXPORT(sysn32_call_table)
PTR sys_memfd_create
PTR sys_bpf
PTR compat_sys_execveat /* 6320 */
PTR sys_userfaultfd
PTR sys_membarrier
.size sysn32_call_table,.-sysn32_call_table

View File

@ -87,6 +87,7 @@ loads_done:
and t0, t1, t0
bnez t0, trace_a_syscall
syscall_common:
jalr t2 # Do The Real Thing (TM)
li t0, -EMAXERRNO - 1 # error?
@ -130,9 +131,9 @@ trace_a_syscall:
1: jal syscall_trace_enter
bltz v0, 2f # seccomp failed? Skip syscall
bltz v0, 1f # seccomp failed? Skip syscall
move t0, s0
move t2, s0
RESTORE_STATIC
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
@ -142,19 +143,9 @@ trace_a_syscall:
ld a5, PT_R9(sp)
ld a6, PT_R10(sp)
ld a7, PT_R11(sp) # For indirect syscalls
jalr t0
j syscall_common
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
2: j syscall_exit
1: j syscall_exit
/* ------------------------------------------------------------------------ */
@ -584,4 +575,6 @@ EXPORT(sys32_call_table)
PTR sys_memfd_create
PTR sys_bpf /* 4355 */
PTR compat_sys_execveat
PTR sys_userfaultfd
PTR sys_membarrier
.size sys32_call_table,.-sys32_call_table

View File

@ -338,7 +338,7 @@ static void __init bootmem_init(void)
if (end <= reserved_end)
continue;
#ifdef CONFIG_BLK_DEV_INITRD
/* mapstart should be after initrd_end */
/* Skip zones before initrd and initrd itself */
if (initrd_end && end <= (unsigned long)PFN_UP(__pa(initrd_end)))
continue;
#endif
@ -371,6 +371,14 @@ static void __init bootmem_init(void)
max_low_pfn = PFN_DOWN(HIGHMEM_START);
}
#ifdef CONFIG_BLK_DEV_INITRD
/*
* mapstart should be after initrd_end
*/
if (initrd_end)
mapstart = max(mapstart, (unsigned long)PFN_UP(__pa(initrd_end)));
#endif
/*
* Initialize the boot-time allocator with low memory only.
*/

View File

@ -42,6 +42,7 @@
#include <asm/mmu_context.h>
#include <asm/time.h>
#include <asm/setup.h>
#include <asm/maar.h>
cpumask_t cpu_callin_map; /* Bitmask of started secondaries */
@ -157,6 +158,7 @@ asmlinkage void start_secondary(void)
mips_clockevent_init();
mp_ops->init_secondary();
cpu_report();
maar_init();
/*
* XXX parity protection should be folded in here when it's converted

View File

@ -64,6 +64,9 @@ void __init prom_init_env(void)
}
if (memsize == 0)
memsize = 256;
loongson_sysconf.nr_uarts = 1;
pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize);
#else
struct boot_params *boot_p;

View File

@ -100,7 +100,7 @@ static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
else
#endif
#if defined(CONFIG_ZONE_DMA) && !defined(CONFIG_ZONE_DMA32)
if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
if (dev->coherent_dma_mask < DMA_BIT_MASK(sizeof(phys_addr_t) * 8))
dma_flag = __GFP_DMA;
else
#endif

View File

@ -44,6 +44,7 @@
#include <asm/pgalloc.h>
#include <asm/tlb.h>
#include <asm/fixmap.h>
#include <asm/maar.h>
/*
* We have up to 8 empty zeroed pages so we can map one of the right colour
@ -252,6 +253,119 @@ void __init fixrange_init(unsigned long start, unsigned long end,
#endif
}
unsigned __weak platform_maar_init(unsigned num_pairs)
{
struct maar_config cfg[BOOT_MEM_MAP_MAX];
unsigned i, num_configured, num_cfg = 0;
phys_addr_t skip;
for (i = 0; i < boot_mem_map.nr_map; i++) {
switch (boot_mem_map.map[i].type) {
case BOOT_MEM_RAM:
case BOOT_MEM_INIT_RAM:
break;
default:
continue;
}
skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
cfg[num_cfg].lower = boot_mem_map.map[i].addr;
cfg[num_cfg].lower += skip;
cfg[num_cfg].upper = cfg[num_cfg].lower;
cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
cfg[num_cfg].upper -= skip;
cfg[num_cfg].attrs = MIPS_MAAR_S;
num_cfg++;
}
num_configured = maar_config(cfg, num_cfg, num_pairs);
if (num_configured < num_cfg)
pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n",
num_pairs, num_cfg);
return num_configured;
}
void maar_init(void)
{
unsigned num_maars, used, i;
phys_addr_t lower, upper, attr;
static struct {
struct maar_config cfgs[3];
unsigned used;
} recorded = { { { 0 } }, 0 };
if (!cpu_has_maar)
return;
/* Detect the number of MAARs */
write_c0_maari(~0);
back_to_back_c0_hazard();
num_maars = read_c0_maari() + 1;
/* MAARs should be in pairs */
WARN_ON(num_maars % 2);
/* Set MAARs using values we recorded already */
if (recorded.used) {
used = maar_config(recorded.cfgs, recorded.used, num_maars / 2);
BUG_ON(used != recorded.used);
} else {
/* Configure the required MAARs */
used = platform_maar_init(num_maars / 2);
}
/* Disable any further MAARs */
for (i = (used * 2); i < num_maars; i++) {
write_c0_maari(i);
back_to_back_c0_hazard();
write_c0_maar(0);
back_to_back_c0_hazard();
}
if (recorded.used)
return;
pr_info("MAAR configuration:\n");
for (i = 0; i < num_maars; i += 2) {
write_c0_maari(i);
back_to_back_c0_hazard();
upper = read_c0_maar();
write_c0_maari(i + 1);
back_to_back_c0_hazard();
lower = read_c0_maar();
attr = lower & upper;
lower = (lower & MIPS_MAAR_ADDR) << 4;
upper = ((upper & MIPS_MAAR_ADDR) << 4) | 0xffff;
pr_info(" [%d]: ", i / 2);
if (!(attr & MIPS_MAAR_V)) {
pr_cont("disabled\n");
continue;
}
pr_cont("%pa-%pa", &lower, &upper);
if (attr & MIPS_MAAR_S)
pr_cont(" speculate");
pr_cont("\n");
/* Record the setup for use on secondary CPUs */
if (used <= ARRAY_SIZE(recorded.cfgs)) {
recorded.cfgs[recorded.used].lower = lower;
recorded.cfgs[recorded.used].upper = upper;
recorded.cfgs[recorded.used].attrs = attr;
recorded.used++;
}
}
}
#ifndef CONFIG_NEED_MULTIPLE_NODES
int page_is_ram(unsigned long pagenr)
{
@ -334,69 +448,6 @@ static inline void mem_init_free_highmem(void)
#endif
}
unsigned __weak platform_maar_init(unsigned num_pairs)
{
struct maar_config cfg[BOOT_MEM_MAP_MAX];
unsigned i, num_configured, num_cfg = 0;
phys_addr_t skip;
for (i = 0; i < boot_mem_map.nr_map; i++) {
switch (boot_mem_map.map[i].type) {
case BOOT_MEM_RAM:
case BOOT_MEM_INIT_RAM:
break;
default:
continue;
}
skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
cfg[num_cfg].lower = boot_mem_map.map[i].addr;
cfg[num_cfg].lower += skip;
cfg[num_cfg].upper = cfg[num_cfg].lower;
cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
cfg[num_cfg].upper -= skip;
cfg[num_cfg].attrs = MIPS_MAAR_S;
num_cfg++;
}
num_configured = maar_config(cfg, num_cfg, num_pairs);
if (num_configured < num_cfg)
pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n",
num_pairs, num_cfg);
return num_configured;
}
static void maar_init(void)
{
unsigned num_maars, used, i;
if (!cpu_has_maar)
return;
/* Detect the number of MAARs */
write_c0_maari(~0);
back_to_back_c0_hazard();
num_maars = read_c0_maari() + 1;
/* MAARs should be in pairs */
WARN_ON(num_maars % 2);
/* Configure the required MAARs */
used = platform_maar_init(num_maars / 2);
/* Disable any further MAARs */
for (i = (used * 2); i < num_maars; i++) {
write_c0_maari(i);
back_to_back_c0_hazard();
write_c0_maar(0);
back_to_back_c0_hazard();
}
}
void __init mem_init(void)
{
#ifdef CONFIG_HIGHMEM

View File

@ -57,15 +57,28 @@
LEAF(sk_load_word)
is_offset_negative(word)
.globl sk_load_word_positive
sk_load_word_positive:
FEXPORT(sk_load_word_positive)
is_offset_in_header(4, word)
/* Offset within header boundaries */
PTR_ADDU t1, $r_skb_data, offset
.set reorder
lw $r_A, 0(t1)
.set noreorder
#ifdef CONFIG_CPU_LITTLE_ENDIAN
# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
wsbh t0, $r_A
rotr $r_A, t0, 16
# else
sll t0, $r_A, 24
srl t1, $r_A, 24
srl t2, $r_A, 8
or t0, t0, t1
andi t2, t2, 0xff00
andi t1, $r_A, 0xff00
or t0, t0, t2
sll t1, t1, 8
or $r_A, t0, t1
# endif
#endif
jr $r_ra
move $r_ret, zero
@ -73,15 +86,24 @@ sk_load_word_positive:
LEAF(sk_load_half)
is_offset_negative(half)
.globl sk_load_half_positive
sk_load_half_positive:
FEXPORT(sk_load_half_positive)
is_offset_in_header(2, half)
/* Offset within header boundaries */
PTR_ADDU t1, $r_skb_data, offset
.set reorder
lh $r_A, 0(t1)
.set noreorder
#ifdef CONFIG_CPU_LITTLE_ENDIAN
# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
wsbh t0, $r_A
seh $r_A, t0
# else
sll t0, $r_A, 24
andi t1, $r_A, 0xff00
sra t0, t0, 16
srl t1, t1, 8
or $r_A, t0, t1
# endif
#endif
jr $r_ra
move $r_ret, zero
@ -89,8 +111,7 @@ sk_load_half_positive:
LEAF(sk_load_byte)
is_offset_negative(byte)
.globl sk_load_byte_positive
sk_load_byte_positive:
FEXPORT(sk_load_byte_positive)
is_offset_in_header(1, byte)
/* Offset within header boundaries */
PTR_ADDU t1, $r_skb_data, offset
@ -148,23 +169,47 @@ sk_load_byte_positive:
NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
bpf_slow_path_common(4)
#ifdef CONFIG_CPU_LITTLE_ENDIAN
# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
wsbh t0, $r_s0
jr $r_ra
rotr $r_A, t0, 16
#endif
# else
sll t0, $r_s0, 24
srl t1, $r_s0, 24
srl t2, $r_s0, 8
or t0, t0, t1
andi t2, t2, 0xff00
andi t1, $r_s0, 0xff00
or t0, t0, t2
sll t1, t1, 8
jr $r_ra
move $r_A, $r_s0
or $r_A, t0, t1
# endif
#else
jr $r_ra
move $r_A, $r_s0
#endif
END(bpf_slow_path_word)
NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp)
bpf_slow_path_common(2)
#ifdef CONFIG_CPU_LITTLE_ENDIAN
# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
jr $r_ra
wsbh $r_A, $r_s0
#endif
# else
sll t0, $r_s0, 8
andi t1, $r_s0, 0xff00
andi t0, t0, 0xff00
srl t1, t1, 8
jr $r_ra
or $r_A, t0, t1
# endif
#else
jr $r_ra
move $r_A, $r_s0
#endif
END(bpf_slow_path_half)

View File

@ -9,3 +9,4 @@ generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += sections.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h

View File

@ -61,4 +61,5 @@ generic-y += types.h
generic-y += unaligned.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

View File

@ -7,3 +7,4 @@ generic-y += mcs_spinlock.h
generic-y += preempt.h
generic-y += rwsem.h
generic-y += vtime.h
generic-y += word-at-a-time.h

View File

@ -6,3 +6,4 @@ generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h

View File

@ -13,3 +13,4 @@ generic-y += sections.h
generic-y += trace_clock.h
generic-y += xor.h
generic-y += serial.h
generic-y += word-at-a-time.h

View File

@ -19,6 +19,7 @@
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/string.h>
#include <gxio/iorpc_globals.h>
#include <gxio/iorpc_mpipe.h>
@ -29,32 +30,6 @@
/* HACK: Avoid pointless "shadow" warnings. */
#define link link_shadow
/**
* strscpy - Copy a C-string into a sized buffer, but only if it fits
* @dest: Where to copy the string to
* @src: Where to copy the string from
* @size: size of destination buffer
*
* Use this routine to avoid copying too-long strings.
* The routine returns the total number of bytes copied
* (including the trailing NUL) or zero if the buffer wasn't
* big enough. To ensure that programmers pay attention
* to the return code, the destination has a single NUL
* written at the front (if size is non-zero) when the
* buffer is not big enough.
*/
static size_t strscpy(char *dest, const char *src, size_t size)
{
size_t len = strnlen(src, size) + 1;
if (len > size) {
if (size)
dest[0] = '\0';
return 0;
}
memcpy(dest, src, len);
return len;
}
int gxio_mpipe_init(gxio_mpipe_context_t *context, unsigned int mpipe_index)
{
char file[32];
@ -540,7 +515,7 @@ int gxio_mpipe_link_instance(const char *link_name)
if (!context)
return GXIO_ERR_NO_DEVICE;
if (strscpy(name.name, link_name, sizeof(name.name)) == 0)
if (strscpy(name.name, link_name, sizeof(name.name)) < 0)
return GXIO_ERR_NO_DEVICE;
return gxio_mpipe_info_instance_aux(context, name);
@ -559,7 +534,7 @@ int gxio_mpipe_link_enumerate_mac(int idx, char *link_name, uint8_t *link_mac)
rv = gxio_mpipe_info_enumerate_aux(context, idx, &name, &mac);
if (rv >= 0) {
if (strscpy(link_name, name.name, sizeof(name.name)) == 0)
if (strscpy(link_name, name.name, sizeof(name.name)) < 0)
return GXIO_ERR_INVAL_MEMORY_SIZE;
memcpy(link_mac, mac.mac, sizeof(mac.mac));
}
@ -576,7 +551,7 @@ int gxio_mpipe_link_open(gxio_mpipe_link_t *link,
_gxio_mpipe_link_name_t name;
int rv;
if (strscpy(name.name, link_name, sizeof(name.name)) == 0)
if (strscpy(name.name, link_name, sizeof(name.name)) < 0)
return GXIO_ERR_NO_DEVICE;
rv = gxio_mpipe_link_open_aux(context, name, flags);

View File

@ -40,4 +40,5 @@ generic-y += termbits.h
generic-y += termios.h
generic-y += trace_clock.h
generic-y += types.h
generic-y += word-at-a-time.h
generic-y += xor.h

View File

@ -22,6 +22,7 @@
#include <linux/platform_device.h>
#include <linux/usb/tilegx.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/types.h>
static u64 ehci_dmamask = DMA_BIT_MASK(32);

View File

@ -25,4 +25,5 @@ generic-y += preempt.h
generic-y += switch_to.h
generic-y += topology.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h
generic-y += xor.h

View File

@ -62,4 +62,5 @@ generic-y += ucontext.h
generic-y += unaligned.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

View File

@ -193,7 +193,7 @@
#define X86_FEATURE_HW_PSTATE ( 7*32+ 8) /* AMD HW-PState */
#define X86_FEATURE_PROC_FEEDBACK ( 7*32+ 9) /* AMD ProcFeedbackInterface */
#define X86_FEATURE_HWP ( 7*32+ 10) /* "hwp" Intel HWP */
#define X86_FEATURE_HWP_NOITFY ( 7*32+ 11) /* Intel HWP_NOTIFY */
#define X86_FEATURE_HWP_NOTIFY ( 7*32+ 11) /* Intel HWP_NOTIFY */
#define X86_FEATURE_HWP_ACT_WINDOW ( 7*32+ 12) /* Intel HWP_ACT_WINDOW */
#define X86_FEATURE_HWP_EPP ( 7*32+13) /* Intel HWP_EPP */
#define X86_FEATURE_HWP_PKG_REQ ( 7*32+14) /* Intel HWP_PKG_REQ */

View File

@ -86,6 +86,7 @@ extern u64 asmlinkage efi_call(void *fp, ...);
extern void __iomem *__init efi_ioremap(unsigned long addr, unsigned long size,
u32 type, u64 attribute);
#ifdef CONFIG_KASAN
/*
* CONFIG_KASAN may redefine memset to __memset. __memset function is present
* only in kernel binary. Since the EFI stub linked into a separate binary it
@ -95,6 +96,7 @@ extern void __iomem *__init efi_ioremap(unsigned long addr, unsigned long size,
#undef memcpy
#undef memset
#undef memmove
#endif
#endif /* CONFIG_X86_32 */

View File

@ -141,6 +141,8 @@
#define DEBUGCTLMSR_BTS_OFF_USR (1UL << 10)
#define DEBUGCTLMSR_FREEZE_LBRS_ON_PMI (1UL << 11)
#define MSR_PEBS_FRONTEND 0x000003f7
#define MSR_IA32_POWER_CTL 0x000001fc
#define MSR_IA32_MC0_CTL 0x00000400

View File

@ -41,6 +41,7 @@ struct pvclock_wall_clock {
#define PVCLOCK_TSC_STABLE_BIT (1 << 0)
#define PVCLOCK_GUEST_STOPPED (1 << 1)
/* PVCLOCK_COUNTS_FROM_ZERO broke ABI and can't be used anymore. */
#define PVCLOCK_COUNTS_FROM_ZERO (1 << 2)
#endif /* __ASSEMBLY__ */
#endif /* _ASM_X86_PVCLOCK_ABI_H */

View File

@ -1,7 +1,7 @@
#ifndef __ASM_X86_BITSPERLONG_H
#define __ASM_X86_BITSPERLONG_H
#ifdef __x86_64__
#if defined(__x86_64__) && !defined(__ILP32__)
# define __BITS_PER_LONG 64
#else
# define __BITS_PER_LONG 32

View File

@ -34,11 +34,10 @@
struct ms_hyperv_info ms_hyperv;
EXPORT_SYMBOL_GPL(ms_hyperv);
static void (*hv_kexec_handler)(void);
static void (*hv_crash_handler)(struct pt_regs *regs);
#if IS_ENABLED(CONFIG_HYPERV)
static void (*vmbus_handler)(void);
static void (*hv_kexec_handler)(void);
static void (*hv_crash_handler)(struct pt_regs *regs);
void hyperv_vector_handler(struct pt_regs *regs)
{
@ -96,8 +95,8 @@ void hv_remove_crash_handler(void)
hv_crash_handler = NULL;
}
EXPORT_SYMBOL_GPL(hv_remove_crash_handler);
#endif
#ifdef CONFIG_KEXEC_CORE
static void hv_machine_shutdown(void)
{
if (kexec_in_progress && hv_kexec_handler)
@ -111,7 +110,8 @@ static void hv_machine_crash_shutdown(struct pt_regs *regs)
hv_crash_handler(regs);
native_machine_crash_shutdown(regs);
}
#endif /* CONFIG_KEXEC_CORE */
#endif /* CONFIG_HYPERV */
static uint32_t __init ms_hyperv_platform(void)
{
@ -186,8 +186,10 @@ static void __init ms_hyperv_init_platform(void)
no_timer_check = 1;
#endif
#if IS_ENABLED(CONFIG_HYPERV) && defined(CONFIG_KEXEC_CORE)
machine_ops.shutdown = hv_machine_shutdown;
machine_ops.crash_shutdown = hv_machine_crash_shutdown;
#endif
mark_tsc_unstable("running on Hyper-V");
}

View File

@ -47,6 +47,7 @@ enum extra_reg_type {
EXTRA_REG_RSP_1 = 1, /* offcore_response_1 */
EXTRA_REG_LBR = 2, /* lbr_select */
EXTRA_REG_LDLAT = 3, /* ld_lat_threshold */
EXTRA_REG_FE = 4, /* fe_* */
EXTRA_REG_MAX /* number of entries needed */
};

View File

@ -205,6 +205,11 @@ static struct extra_reg intel_skl_extra_regs[] __read_mostly = {
INTEL_UEVENT_EXTRA_REG(0x01b7, MSR_OFFCORE_RSP_0, 0x3fffff8fffull, RSP_0),
INTEL_UEVENT_EXTRA_REG(0x01bb, MSR_OFFCORE_RSP_1, 0x3fffff8fffull, RSP_1),
INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd),
/*
* Note the low 8 bits eventsel code is not a continuous field, containing
* some #GPing bits. These are masked out.
*/
INTEL_UEVENT_EXTRA_REG(0x01c6, MSR_PEBS_FRONTEND, 0x7fff17, FE),
EVENT_EXTRA_END
};
@ -250,7 +255,7 @@ struct event_constraint intel_bdw_event_constraints[] = {
FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
INTEL_UEVENT_CONSTRAINT(0x148, 0x4), /* L1D_PEND_MISS.PENDING */
INTEL_EVENT_CONSTRAINT(0xa3, 0x4), /* CYCLE_ACTIVITY.* */
INTEL_UEVENT_CONSTRAINT(0x8a3, 0x4), /* CYCLE_ACTIVITY.CYCLES_L1D_MISS */
EVENT_CONSTRAINT_END
};
@ -2891,6 +2896,8 @@ PMU_FORMAT_ATTR(offcore_rsp, "config1:0-63");
PMU_FORMAT_ATTR(ldlat, "config1:0-15");
PMU_FORMAT_ATTR(frontend, "config1:0-23");
static struct attribute *intel_arch3_formats_attr[] = {
&format_attr_event.attr,
&format_attr_umask.attr,
@ -2907,6 +2914,11 @@ static struct attribute *intel_arch3_formats_attr[] = {
NULL,
};
static struct attribute *skl_format_attr[] = {
&format_attr_frontend.attr,
NULL,
};
static __initconst const struct x86_pmu core_pmu = {
.name = "core",
.handle_irq = x86_pmu_handle_irq,
@ -3516,7 +3528,8 @@ __init int intel_pmu_init(void)
x86_pmu.hw_config = hsw_hw_config;
x86_pmu.get_event_constraints = hsw_get_event_constraints;
x86_pmu.cpu_events = hsw_events_attrs;
x86_pmu.format_attrs = merge_attr(intel_arch3_formats_attr,
skl_format_attr);
WARN_ON(!x86_pmu.format_attrs);
x86_pmu.cpu_events = hsw_events_attrs;
pr_cont("Skylake events, ");

View File

@ -10,12 +10,12 @@ enum perf_msr_id {
PERF_MSR_EVENT_MAX,
};
bool test_aperfmperf(int idx)
static bool test_aperfmperf(int idx)
{
return boot_cpu_has(X86_FEATURE_APERFMPERF);
}
bool test_intel(int idx)
static bool test_intel(int idx)
{
if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL ||
boot_cpu_data.x86 != 6)

View File

@ -37,7 +37,7 @@ void init_scattered_cpuid_features(struct cpuinfo_x86 *c)
{ X86_FEATURE_PLN, CR_EAX, 4, 0x00000006, 0 },
{ X86_FEATURE_PTS, CR_EAX, 6, 0x00000006, 0 },
{ X86_FEATURE_HWP, CR_EAX, 7, 0x00000006, 0 },
{ X86_FEATURE_HWP_NOITFY, CR_EAX, 8, 0x00000006, 0 },
{ X86_FEATURE_HWP_NOTIFY, CR_EAX, 8, 0x00000006, 0 },
{ X86_FEATURE_HWP_ACT_WINDOW, CR_EAX, 9, 0x00000006, 0 },
{ X86_FEATURE_HWP_EPP, CR_EAX,10, 0x00000006, 0 },
{ X86_FEATURE_HWP_PKG_REQ, CR_EAX,11, 0x00000006, 0 },

View File

@ -185,10 +185,9 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
}
#ifdef CONFIG_KEXEC_FILE
static int get_nr_ram_ranges_callback(unsigned long start_pfn,
unsigned long nr_pfn, void *arg)
static int get_nr_ram_ranges_callback(u64 start, u64 end, void *arg)
{
int *nr_ranges = arg;
unsigned int *nr_ranges = arg;
(*nr_ranges)++;
return 0;
@ -214,7 +213,7 @@ static void fill_up_crash_elf_data(struct crash_elf_data *ced,
ced->image = image;
walk_system_ram_range(0, -1, &nr_ranges,
walk_system_ram_res(0, -1, &nr_ranges,
get_nr_ram_ranges_callback);
ced->max_nr_ranges = nr_ranges;

View File

@ -506,3 +506,58 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
}
/*
* Called from fs/proc with a reference on @p to find the function
* which called into schedule(). This needs to be done carefully
* because the task might wake up and we might look at a stack
* changing under us.
*/
unsigned long get_wchan(struct task_struct *p)
{
unsigned long start, bottom, top, sp, fp, ip;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
start = (unsigned long)task_stack_page(p);
if (!start)
return 0;
/*
* Layout of the stack page:
*
* ----------- topmax = start + THREAD_SIZE - sizeof(unsigned long)
* PADDING
* ----------- top = topmax - TOP_OF_KERNEL_STACK_PADDING
* stack
* ----------- bottom = start + sizeof(thread_info)
* thread_info
* ----------- start
*
* The tasks stack pointer points at the location where the
* framepointer is stored. The data on the stack is:
* ... IP FP ... IP FP
*
* We need to read FP and IP, so we need to adjust the upper
* bound by another unsigned long.
*/
top = start + THREAD_SIZE - TOP_OF_KERNEL_STACK_PADDING;
top -= 2 * sizeof(unsigned long);
bottom = start + sizeof(struct thread_info);
sp = READ_ONCE(p->thread.sp);
if (sp < bottom || sp > top)
return 0;
fp = READ_ONCE(*(unsigned long *)sp);
do {
if (fp < bottom || fp > top)
return 0;
ip = READ_ONCE(*(unsigned long *)(fp + sizeof(unsigned long)));
if (!in_sched_functions(ip))
return ip;
fp = READ_ONCE(*(unsigned long *)fp);
} while (count++ < 16 && p->state != TASK_RUNNING);
return 0;
}

View File

@ -324,31 +324,3 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
return prev_p;
}
#define top_esp (THREAD_SIZE - sizeof(unsigned long))
#define top_ebp (THREAD_SIZE - 2*sizeof(unsigned long))
unsigned long get_wchan(struct task_struct *p)
{
unsigned long bp, sp, ip;
unsigned long stack_page;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
stack_page = (unsigned long)task_stack_page(p);
sp = p->thread.sp;
if (!stack_page || sp < stack_page || sp > top_esp+stack_page)
return 0;
/* include/asm-i386/system.h:switch_to() pushes bp last. */
bp = *(unsigned long *) sp;
do {
if (bp < stack_page || bp > top_ebp+stack_page)
return 0;
ip = *(unsigned long *) (bp+4);
if (!in_sched_functions(ip))
return ip;
bp = *(unsigned long *) bp;
} while (count++ < 16);
return 0;
}

View File

@ -499,30 +499,6 @@ void set_personality_ia32(bool x32)
}
EXPORT_SYMBOL_GPL(set_personality_ia32);
unsigned long get_wchan(struct task_struct *p)
{
unsigned long stack;
u64 fp, ip;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
stack = (unsigned long)task_stack_page(p);
if (p->thread.sp < stack || p->thread.sp >= stack+THREAD_SIZE)
return 0;
fp = *(u64 *)(p->thread.sp);
do {
if (fp < (unsigned long)stack ||
fp >= (unsigned long)stack+THREAD_SIZE)
return 0;
ip = *(u64 *)(fp+8);
if (!in_sched_functions(ip))
return ip;
fp = *(u64 *)fp;
} while (count++ < 16);
return 0;
}
long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
{
int ret = 0;

View File

@ -514,7 +514,7 @@ static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
struct vcpu_svm *svm = to_svm(vcpu);
if (svm->vmcb->control.next_rip != 0) {
WARN_ON(!static_cpu_has(X86_FEATURE_NRIPS));
WARN_ON_ONCE(!static_cpu_has(X86_FEATURE_NRIPS));
svm->next_rip = svm->vmcb->control.next_rip;
}
@ -866,64 +866,6 @@ static void svm_disable_lbrv(struct vcpu_svm *svm)
set_msr_interception(msrpm, MSR_IA32_LASTINTTOIP, 0, 0);
}
#define MTRR_TYPE_UC_MINUS 7
#define MTRR2PROTVAL_INVALID 0xff
static u8 mtrr2protval[8];
static u8 fallback_mtrr_type(int mtrr)
{
/*
* WT and WP aren't always available in the host PAT. Treat
* them as UC and UC- respectively. Everything else should be
* there.
*/
switch (mtrr)
{
case MTRR_TYPE_WRTHROUGH:
return MTRR_TYPE_UNCACHABLE;
case MTRR_TYPE_WRPROT:
return MTRR_TYPE_UC_MINUS;
default:
BUG();
}
}
static void build_mtrr2protval(void)
{
int i;
u64 pat;
for (i = 0; i < 8; i++)
mtrr2protval[i] = MTRR2PROTVAL_INVALID;
/* Ignore the invalid MTRR types. */
mtrr2protval[2] = 0;
mtrr2protval[3] = 0;
/*
* Use host PAT value to figure out the mapping from guest MTRR
* values to nested page table PAT/PCD/PWT values. We do not
* want to change the host PAT value every time we enter the
* guest.
*/
rdmsrl(MSR_IA32_CR_PAT, pat);
for (i = 0; i < 8; i++) {
u8 mtrr = pat >> (8 * i);
if (mtrr2protval[mtrr] == MTRR2PROTVAL_INVALID)
mtrr2protval[mtrr] = __cm_idx2pte(i);
}
for (i = 0; i < 8; i++) {
if (mtrr2protval[i] == MTRR2PROTVAL_INVALID) {
u8 fallback = fallback_mtrr_type(i);
mtrr2protval[i] = mtrr2protval[fallback];
BUG_ON(mtrr2protval[i] == MTRR2PROTVAL_INVALID);
}
}
}
static __init int svm_hardware_setup(void)
{
int cpu;
@ -990,7 +932,6 @@ static __init int svm_hardware_setup(void)
} else
kvm_disable_tdp();
build_mtrr2protval();
return 0;
err:
@ -1145,43 +1086,6 @@ static u64 svm_compute_tsc_offset(struct kvm_vcpu *vcpu, u64 target_tsc)
return target_tsc - tsc;
}
static void svm_set_guest_pat(struct vcpu_svm *svm, u64 *g_pat)
{
struct kvm_vcpu *vcpu = &svm->vcpu;
/* Unlike Intel, AMD takes the guest's CR0.CD into account.
*
* AMD does not have IPAT. To emulate it for the case of guests
* with no assigned devices, just set everything to WB. If guests
* have assigned devices, however, we cannot force WB for RAM
* pages only, so use the guest PAT directly.
*/
if (!kvm_arch_has_assigned_device(vcpu->kvm))
*g_pat = 0x0606060606060606;
else
*g_pat = vcpu->arch.pat;
}
static u64 svm_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
{
u8 mtrr;
/*
* 1. MMIO: trust guest MTRR, so same as item 3.
* 2. No passthrough: always map as WB, and force guest PAT to WB as well
* 3. Passthrough: can't guarantee the result, try to trust guest.
*/
if (!is_mmio && !kvm_arch_has_assigned_device(vcpu->kvm))
return 0;
if (!kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_CD_NW_CLEARED) &&
kvm_read_cr0(vcpu) & X86_CR0_CD)
return _PAGE_NOCACHE;
mtrr = kvm_mtrr_get_guest_memory_type(vcpu, gfn);
return mtrr2protval[mtrr];
}
static void init_vmcb(struct vcpu_svm *svm, bool init_event)
{
struct vmcb_control_area *control = &svm->vmcb->control;
@ -1278,7 +1182,6 @@ static void init_vmcb(struct vcpu_svm *svm, bool init_event)
clr_cr_intercept(svm, INTERCEPT_CR3_READ);
clr_cr_intercept(svm, INTERCEPT_CR3_WRITE);
save->g_pat = svm->vcpu.arch.pat;
svm_set_guest_pat(svm, &save->g_pat);
save->cr3 = 0;
save->cr4 = 0;
}
@ -1673,10 +1576,13 @@ static void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
if (!vcpu->fpu_active)
cr0 |= X86_CR0_TS;
/* These are emulated via page tables. */
cr0 &= ~(X86_CR0_CD | X86_CR0_NW);
/*
* re-enable caching here because the QEMU bios
* does not do it - this results in some delay at
* reboot
*/
if (kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_CD_NW_CLEARED))
cr0 &= ~(X86_CR0_CD | X86_CR0_NW);
svm->vmcb->save.cr0 = cr0;
mark_dirty(svm->vmcb, VMCB_CR);
update_cr0_intercept(svm);
@ -3351,16 +3257,6 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr)
case MSR_VM_IGNNE:
vcpu_unimpl(vcpu, "unimplemented wrmsr: 0x%x data 0x%llx\n", ecx, data);
break;
case MSR_IA32_CR_PAT:
if (npt_enabled) {
if (!kvm_mtrr_valid(vcpu, MSR_IA32_CR_PAT, data))
return 1;
vcpu->arch.pat = data;
svm_set_guest_pat(svm, &svm->vmcb->save.g_pat);
mark_dirty(svm->vmcb, VMCB_NPT);
break;
}
/* fall through */
default:
return kvm_set_msr_common(vcpu, msr);
}
@ -4195,6 +4091,11 @@ static bool svm_has_high_real_mode_segbase(void)
return true;
}
static u64 svm_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
{
return 0;
}
static void svm_cpuid_update(struct kvm_vcpu *vcpu)
{
}

View File

@ -8617,17 +8617,22 @@ static u64 vmx_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
u64 ipat = 0;
/* For VT-d and EPT combination
* 1. MMIO: guest may want to apply WC, trust it.
* 1. MMIO: always map as UC
* 2. EPT with VT-d:
* a. VT-d without snooping control feature: can't guarantee the
* result, try to trust guest. So the same as item 1.
* result, try to trust guest.
* b. VT-d with snooping control feature: snooping control feature of
* VT-d engine can guarantee the cache correctness. Just set it
* to WB to keep consistent with host. So the same as item 3.
* 3. EPT without VT-d: always map as WB and set IPAT=1 to keep
* consistent with host MTRR
*/
if (!is_mmio && !kvm_arch_has_noncoherent_dma(vcpu->kvm)) {
if (is_mmio) {
cache = MTRR_TYPE_UNCACHABLE;
goto exit;
}
if (!kvm_arch_has_noncoherent_dma(vcpu->kvm)) {
ipat = VMX_EPT_IPAT_BIT;
cache = MTRR_TYPE_WRBACK;
goto exit;

View File

@ -1708,8 +1708,6 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
vcpu->pvclock_set_guest_stopped_request = false;
}
pvclock_flags |= PVCLOCK_COUNTS_FROM_ZERO;
/* If the host uses TSC clocksource, then it is stable */
if (use_master_clock)
pvclock_flags |= PVCLOCK_TSC_STABLE_BIT;
@ -2007,8 +2005,6 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
&vcpu->requests);
ka->boot_vcpu_runs_old_kvmclock = tmp;
ka->kvmclock_offset = -get_kernel_ns();
}
vcpu->arch.time = data;

View File

@ -1132,7 +1132,7 @@ void mark_rodata_ro(void)
* has been zapped already via cleanup_highmem().
*/
all_end = roundup((unsigned long)_brk_end, PMD_SIZE);
set_memory_nx(rodata_start, (all_end - rodata_start) >> PAGE_SHIFT);
set_memory_nx(text_end, (all_end - text_end) >> PAGE_SHIFT);
rodata_test();

View File

@ -704,6 +704,70 @@ out:
return ret;
}
/*
* Iterate the EFI memory map in reverse order because the regions
* will be mapped top-down. The end result is the same as if we had
* mapped things forward, but doesn't require us to change the
* existing implementation of efi_map_region().
*/
static inline void *efi_map_next_entry_reverse(void *entry)
{
/* Initial call */
if (!entry)
return memmap.map_end - memmap.desc_size;
entry -= memmap.desc_size;
if (entry < memmap.map)
return NULL;
return entry;
}
/*
* efi_map_next_entry - Return the next EFI memory map descriptor
* @entry: Previous EFI memory map descriptor
*
* This is a helper function to iterate over the EFI memory map, which
* we do in different orders depending on the current configuration.
*
* To begin traversing the memory map @entry must be %NULL.
*
* Returns %NULL when we reach the end of the memory map.
*/
static void *efi_map_next_entry(void *entry)
{
if (!efi_enabled(EFI_OLD_MEMMAP) && efi_enabled(EFI_64BIT)) {
/*
* Starting in UEFI v2.5 the EFI_PROPERTIES_TABLE
* config table feature requires us to map all entries
* in the same order as they appear in the EFI memory
* map. That is to say, entry N must have a lower
* virtual address than entry N+1. This is because the
* firmware toolchain leaves relative references in
* the code/data sections, which are split and become
* separate EFI memory regions. Mapping things
* out-of-order leads to the firmware accessing
* unmapped addresses.
*
* Since we need to map things this way whether or not
* the kernel actually makes use of
* EFI_PROPERTIES_TABLE, let's just switch to this
* scheme by default for 64-bit.
*/
return efi_map_next_entry_reverse(entry);
}
/* Initial call */
if (!entry)
return memmap.map;
entry += memmap.desc_size;
if (entry >= memmap.map_end)
return NULL;
return entry;
}
/*
* Map the efi memory ranges of the runtime services and update new_mmap with
* virtual addresses.
@ -714,7 +778,8 @@ static void * __init efi_map_regions(int *count, int *pg_shift)
unsigned long left = 0;
efi_memory_desc_t *md;
for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
p = NULL;
while ((p = efi_map_next_entry(p))) {
md = p;
if (!(md->attribute & EFI_MEMORY_RUNTIME)) {
#ifdef CONFIG_X86_64

View File

@ -28,4 +28,5 @@ generic-y += statfs.h
generic-y += termios.h
generic-y += topology.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h
generic-y += xor.h

View File

@ -31,7 +31,8 @@ static int get_first_sibling(unsigned int cpu)
return cpu;
}
int blk_mq_update_queue_map(unsigned int *map, unsigned int nr_queues)
int blk_mq_update_queue_map(unsigned int *map, unsigned int nr_queues,
const struct cpumask *online_mask)
{
unsigned int i, nr_cpus, nr_uniq_cpus, queue, first_sibling;
cpumask_var_t cpus;
@ -41,7 +42,7 @@ int blk_mq_update_queue_map(unsigned int *map, unsigned int nr_queues)
cpumask_clear(cpus);
nr_cpus = nr_uniq_cpus = 0;
for_each_online_cpu(i) {
for_each_cpu(i, online_mask) {
nr_cpus++;
first_sibling = get_first_sibling(i);
if (!cpumask_test_cpu(first_sibling, cpus))
@ -51,7 +52,7 @@ int blk_mq_update_queue_map(unsigned int *map, unsigned int nr_queues)
queue = 0;
for_each_possible_cpu(i) {
if (!cpu_online(i)) {
if (!cpumask_test_cpu(i, online_mask)) {
map[i] = 0;
continue;
}
@ -95,7 +96,7 @@ unsigned int *blk_mq_make_queue_map(struct blk_mq_tag_set *set)
if (!map)
return NULL;
if (!blk_mq_update_queue_map(map, set->nr_hw_queues))
if (!blk_mq_update_queue_map(map, set->nr_hw_queues, cpu_online_mask))
return map;
kfree(map);

View File

@ -229,8 +229,6 @@ static ssize_t blk_mq_hw_sysfs_cpus_show(struct blk_mq_hw_ctx *hctx, char *page)
unsigned int i, first = 1;
ssize_t ret = 0;
blk_mq_disable_hotplug();
for_each_cpu(i, hctx->cpumask) {
if (first)
ret += sprintf(ret + page, "%u", i);
@ -240,8 +238,6 @@ static ssize_t blk_mq_hw_sysfs_cpus_show(struct blk_mq_hw_ctx *hctx, char *page)
first = 0;
}
blk_mq_enable_hotplug();
ret += sprintf(ret + page, "\n");
return ret;
}
@ -343,7 +339,7 @@ static void blk_mq_unregister_hctx(struct blk_mq_hw_ctx *hctx)
struct blk_mq_ctx *ctx;
int i;
if (!hctx->nr_ctx || !(hctx->flags & BLK_MQ_F_SYSFS_UP))
if (!hctx->nr_ctx)
return;
hctx_for_each_ctx(hctx, ctx, i)
@ -358,7 +354,7 @@ static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx)
struct blk_mq_ctx *ctx;
int i, ret;
if (!hctx->nr_ctx || !(hctx->flags & BLK_MQ_F_SYSFS_UP))
if (!hctx->nr_ctx)
return 0;
ret = kobject_add(&hctx->kobj, &q->mq_kobj, "%u", hctx->queue_num);
@ -381,6 +377,8 @@ void blk_mq_unregister_disk(struct gendisk *disk)
struct blk_mq_ctx *ctx;
int i, j;
blk_mq_disable_hotplug();
queue_for_each_hw_ctx(q, hctx, i) {
blk_mq_unregister_hctx(hctx);
@ -395,6 +393,9 @@ void blk_mq_unregister_disk(struct gendisk *disk)
kobject_put(&q->mq_kobj);
kobject_put(&disk_to_dev(disk)->kobj);
q->mq_sysfs_init_done = false;
blk_mq_enable_hotplug();
}
static void blk_mq_sysfs_init(struct request_queue *q)
@ -425,27 +426,30 @@ int blk_mq_register_disk(struct gendisk *disk)
struct blk_mq_hw_ctx *hctx;
int ret, i;
blk_mq_disable_hotplug();
blk_mq_sysfs_init(q);
ret = kobject_add(&q->mq_kobj, kobject_get(&dev->kobj), "%s", "mq");
if (ret < 0)
return ret;
goto out;
kobject_uevent(&q->mq_kobj, KOBJ_ADD);
queue_for_each_hw_ctx(q, hctx, i) {
hctx->flags |= BLK_MQ_F_SYSFS_UP;
ret = blk_mq_register_hctx(hctx);
if (ret)
break;
}
if (ret) {
if (ret)
blk_mq_unregister_disk(disk);
return ret;
}
else
q->mq_sysfs_init_done = true;
out:
blk_mq_enable_hotplug();
return 0;
return ret;
}
EXPORT_SYMBOL_GPL(blk_mq_register_disk);
@ -454,6 +458,9 @@ void blk_mq_sysfs_unregister(struct request_queue *q)
struct blk_mq_hw_ctx *hctx;
int i;
if (!q->mq_sysfs_init_done)
return;
queue_for_each_hw_ctx(q, hctx, i)
blk_mq_unregister_hctx(hctx);
}
@ -463,6 +470,9 @@ int blk_mq_sysfs_register(struct request_queue *q)
struct blk_mq_hw_ctx *hctx;
int i, ret = 0;
if (!q->mq_sysfs_init_done)
return ret;
queue_for_each_hw_ctx(q, hctx, i) {
ret = blk_mq_register_hctx(hctx);
if (ret)

View File

@ -471,17 +471,30 @@ void blk_mq_all_tag_busy_iter(struct blk_mq_tags *tags, busy_tag_iter_fn *fn,
}
EXPORT_SYMBOL(blk_mq_all_tag_busy_iter);
void blk_mq_tag_busy_iter(struct blk_mq_hw_ctx *hctx, busy_iter_fn *fn,
void blk_mq_queue_tag_busy_iter(struct request_queue *q, busy_iter_fn *fn,
void *priv)
{
struct blk_mq_tags *tags = hctx->tags;
struct blk_mq_hw_ctx *hctx;
int i;
queue_for_each_hw_ctx(q, hctx, i) {
struct blk_mq_tags *tags = hctx->tags;
/*
* If not software queues are currently mapped to this
* hardware queue, there's nothing to check
*/
if (!blk_mq_hw_queue_mapped(hctx))
continue;
if (tags->nr_reserved_tags)
bt_for_each(hctx, &tags->breserved_tags, 0, fn, priv, true);
bt_for_each(hctx, &tags->bitmap_tags, tags->nr_reserved_tags, fn, priv,
false);
}
if (tags->nr_reserved_tags)
bt_for_each(hctx, &tags->breserved_tags, 0, fn, priv, true);
bt_for_each(hctx, &tags->bitmap_tags, tags->nr_reserved_tags, fn, priv,
false);
}
EXPORT_SYMBOL(blk_mq_tag_busy_iter);
static unsigned int bt_unused_tags(struct blk_mq_bitmap_tags *bt)
{

View File

@ -58,6 +58,8 @@ extern ssize_t blk_mq_tag_sysfs_show(struct blk_mq_tags *tags, char *page);
extern void blk_mq_tag_init_last_tag(struct blk_mq_tags *tags, unsigned int *last_tag);
extern int blk_mq_tag_update_depth(struct blk_mq_tags *tags, unsigned int depth);
extern void blk_mq_tag_wakeup_all(struct blk_mq_tags *tags, bool);
void blk_mq_queue_tag_busy_iter(struct request_queue *q, busy_iter_fn *fn,
void *priv);
enum {
BLK_MQ_TAG_CACHE_MIN = 1,

View File

@ -393,14 +393,16 @@ void __blk_mq_complete_request(struct request *rq)
* Ends all I/O on a request. It does not handle partial completions.
* The actual completion happens out-of-order, through a IPI handler.
**/
void blk_mq_complete_request(struct request *rq)
void blk_mq_complete_request(struct request *rq, int error)
{
struct request_queue *q = rq->q;
if (unlikely(blk_should_fake_timeout(q)))
return;
if (!blk_mark_rq_complete(rq))
if (!blk_mark_rq_complete(rq)) {
rq->errors = error;
__blk_mq_complete_request(rq);
}
}
EXPORT_SYMBOL(blk_mq_complete_request);
@ -616,10 +618,8 @@ static void blk_mq_check_expired(struct blk_mq_hw_ctx *hctx,
* If a request wasn't started before the queue was
* marked dying, kill it here or it'll go unnoticed.
*/
if (unlikely(blk_queue_dying(rq->q))) {
rq->errors = -EIO;
blk_mq_complete_request(rq);
}
if (unlikely(blk_queue_dying(rq->q)))
blk_mq_complete_request(rq, -EIO);
return;
}
if (rq->cmd_flags & REQ_NO_TIMEOUT)
@ -641,24 +641,16 @@ static void blk_mq_rq_timer(unsigned long priv)
.next = 0,
.next_set = 0,
};
struct blk_mq_hw_ctx *hctx;
int i;
queue_for_each_hw_ctx(q, hctx, i) {
/*
* If not software queues are currently mapped to this
* hardware queue, there's nothing to check
*/
if (!blk_mq_hw_queue_mapped(hctx))
continue;
blk_mq_tag_busy_iter(hctx, blk_mq_check_expired, &data);
}
blk_mq_queue_tag_busy_iter(q, blk_mq_check_expired, &data);
if (data.next_set) {
data.next = blk_rq_timeout(round_jiffies_up(data.next));
mod_timer(&q->timeout, data.next);
} else {
struct blk_mq_hw_ctx *hctx;
queue_for_each_hw_ctx(q, hctx, i) {
/* the hctx may be unmapped, so check it here */
if (blk_mq_hw_queue_mapped(hctx))
@ -1789,13 +1781,19 @@ static void blk_mq_init_cpu_queues(struct request_queue *q,
}
}
static void blk_mq_map_swqueue(struct request_queue *q)
static void blk_mq_map_swqueue(struct request_queue *q,
const struct cpumask *online_mask)
{
unsigned int i;
struct blk_mq_hw_ctx *hctx;
struct blk_mq_ctx *ctx;
struct blk_mq_tag_set *set = q->tag_set;
/*
* Avoid others reading imcomplete hctx->cpumask through sysfs
*/
mutex_lock(&q->sysfs_lock);
queue_for_each_hw_ctx(q, hctx, i) {
cpumask_clear(hctx->cpumask);
hctx->nr_ctx = 0;
@ -1806,16 +1804,17 @@ static void blk_mq_map_swqueue(struct request_queue *q)
*/
queue_for_each_ctx(q, ctx, i) {
/* If the cpu isn't online, the cpu is mapped to first hctx */
if (!cpu_online(i))
if (!cpumask_test_cpu(i, online_mask))
continue;
hctx = q->mq_ops->map_queue(q, i);
cpumask_set_cpu(i, hctx->cpumask);
cpumask_set_cpu(i, hctx->tags->cpumask);
ctx->index_hw = hctx->nr_ctx;
hctx->ctxs[hctx->nr_ctx++] = ctx;
}
mutex_unlock(&q->sysfs_lock);
queue_for_each_hw_ctx(q, hctx, i) {
struct blk_mq_ctxmap *map = &hctx->ctx_map;
@ -1851,6 +1850,14 @@ static void blk_mq_map_swqueue(struct request_queue *q)
hctx->next_cpu = cpumask_first(hctx->cpumask);
hctx->next_cpu_batch = BLK_MQ_CPU_WORK_BATCH;
}
queue_for_each_ctx(q, ctx, i) {
if (!cpumask_test_cpu(i, online_mask))
continue;
hctx = q->mq_ops->map_queue(q, i);
cpumask_set_cpu(i, hctx->tags->cpumask);
}
}
static void blk_mq_update_tag_set_depth(struct blk_mq_tag_set *set)
@ -1918,6 +1925,9 @@ void blk_mq_release(struct request_queue *q)
kfree(hctx);
}
kfree(q->mq_map);
q->mq_map = NULL;
kfree(q->queue_hw_ctx);
/* ctx kobj stays in queue_ctx */
@ -2027,13 +2037,15 @@ struct request_queue *blk_mq_init_allocated_queue(struct blk_mq_tag_set *set,
if (blk_mq_init_hw_queues(q, set))
goto err_hctxs;
get_online_cpus();
mutex_lock(&all_q_mutex);
list_add_tail(&q->all_q_node, &all_q_list);
mutex_unlock(&all_q_mutex);
blk_mq_add_queue_tag_set(set, q);
blk_mq_map_swqueue(q, cpu_online_mask);
blk_mq_map_swqueue(q);
mutex_unlock(&all_q_mutex);
put_online_cpus();
return q;
@ -2057,30 +2069,27 @@ void blk_mq_free_queue(struct request_queue *q)
{
struct blk_mq_tag_set *set = q->tag_set;
mutex_lock(&all_q_mutex);
list_del_init(&q->all_q_node);
mutex_unlock(&all_q_mutex);
blk_mq_del_queue_tag_set(q);
blk_mq_exit_hw_queues(q, set, set->nr_hw_queues);
blk_mq_free_hw_queues(q, set);
percpu_ref_exit(&q->mq_usage_counter);
kfree(q->mq_map);
q->mq_map = NULL;
mutex_lock(&all_q_mutex);
list_del_init(&q->all_q_node);
mutex_unlock(&all_q_mutex);
}
/* Basically redo blk_mq_init_queue with queue frozen */
static void blk_mq_queue_reinit(struct request_queue *q)
static void blk_mq_queue_reinit(struct request_queue *q,
const struct cpumask *online_mask)
{
WARN_ON_ONCE(!atomic_read(&q->mq_freeze_depth));
blk_mq_sysfs_unregister(q);
blk_mq_update_queue_map(q->mq_map, q->nr_hw_queues);
blk_mq_update_queue_map(q->mq_map, q->nr_hw_queues, online_mask);
/*
* redo blk_mq_init_cpu_queues and blk_mq_init_hw_queues. FIXME: maybe
@ -2088,7 +2097,7 @@ static void blk_mq_queue_reinit(struct request_queue *q)
* involves free and re-allocate memory, worthy doing?)
*/
blk_mq_map_swqueue(q);
blk_mq_map_swqueue(q, online_mask);
blk_mq_sysfs_register(q);
}
@ -2097,16 +2106,43 @@ static int blk_mq_queue_reinit_notify(struct notifier_block *nb,
unsigned long action, void *hcpu)
{
struct request_queue *q;
int cpu = (unsigned long)hcpu;
/*
* New online cpumask which is going to be set in this hotplug event.
* Declare this cpumasks as global as cpu-hotplug operation is invoked
* one-by-one and dynamically allocating this could result in a failure.
*/
static struct cpumask online_new;
/*
* Before new mappings are established, hotadded cpu might already
* start handling requests. This doesn't break anything as we map
* offline CPUs to first hardware queue. We will re-init the queue
* below to get optimal settings.
* Before hotadded cpu starts handling requests, new mappings must
* be established. Otherwise, these requests in hw queue might
* never be dispatched.
*
* For example, there is a single hw queue (hctx) and two CPU queues
* (ctx0 for CPU0, and ctx1 for CPU1).
*
* Now CPU1 is just onlined and a request is inserted into
* ctx1->rq_list and set bit0 in pending bitmap as ctx1->index_hw is
* still zero.
*
* And then while running hw queue, flush_busy_ctxs() finds bit0 is
* set in pending bitmap and tries to retrieve requests in
* hctx->ctxs[0]->rq_list. But htx->ctxs[0] is a pointer to ctx0,
* so the request in ctx1->rq_list is ignored.
*/
if (action != CPU_DEAD && action != CPU_DEAD_FROZEN &&
action != CPU_ONLINE && action != CPU_ONLINE_FROZEN)
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_DEAD:
case CPU_UP_CANCELED:
cpumask_copy(&online_new, cpu_online_mask);
break;
case CPU_UP_PREPARE:
cpumask_copy(&online_new, cpu_online_mask);
cpumask_set_cpu(cpu, &online_new);
break;
default:
return NOTIFY_OK;
}
mutex_lock(&all_q_mutex);
@ -2130,7 +2166,7 @@ static int blk_mq_queue_reinit_notify(struct notifier_block *nb,
}
list_for_each_entry(q, &all_q_list, all_q_node)
blk_mq_queue_reinit(q);
blk_mq_queue_reinit(q, &online_new);
list_for_each_entry(q, &all_q_list, all_q_node)
blk_mq_unfreeze_queue(q);

View File

@ -51,7 +51,8 @@ void blk_mq_disable_hotplug(void);
* CPU -> queue mappings
*/
extern unsigned int *blk_mq_make_queue_map(struct blk_mq_tag_set *set);
extern int blk_mq_update_queue_map(unsigned int *map, unsigned int nr_queues);
extern int blk_mq_update_queue_map(unsigned int *map, unsigned int nr_queues,
const struct cpumask *online_mask);
extern int blk_mq_hw_queue_to_node(unsigned int *map, unsigned int);
/*

View File

@ -332,10 +332,6 @@ static int x509_key_preparse(struct key_preparsed_payload *prep)
srlen = cert->raw_serial_size;
q = cert->raw_serial;
}
if (srlen > 1 && *q == 0) {
srlen--;
q++;
}
ret = -ENOMEM;
desc = kmalloc(sulen + 2 + srlen * 2 + 1, GFP_KERNEL);

Some files were not shown because too many files have changed in this diff Show More